Search Results

Search found 11553 results on 463 pages for 'disk utility'.

Page 210/463 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

  - by Aggrevated

  I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

  Read the article

• linux kernel buffer memory is zero

  - by user64772

  Hi all. There are one qestion that i can`t find in google. I have many linux boxes mostly with SLES or openSUSE, diffrent versions and kernels. On some of them i faced with slow oracle transactions problem. It time to time problem and when i log in the box on that time i see that oracle blocked in kernel function sync_page # while :; do ps axo stat,pid,cmd,wchan | egrep '^D|^R'; echo --; sleep 5; done D 3483 hald-addon-storage: polling ide_do_drive_cmd Ds 4635 ora_dbw0_orcl sync_page Ds 4637 ora_lgwr_orcl sync_page Ds 4639 ora_ckpt_orcl sync_page D 11210 oracleorcl (LOCAL=NO) sync_page D 12457 [smtpd] sync_page R+ 12458 ps axo stat,pid,cmd,wchan - -- Ds 4635 ora_dbw0_orcl sync_page Ds 4637 ora_lgwr_orcl sync_page Ds 4639 ora_ckpt_orcl sync_page D 11210 oracleorcl (LOCAL=NO) sync_page R+ 12501 ps axo stat,pid,cmd,wchan - -- Ds 4635 ora_dbw0_orcl sync_page Ds 4637 ora_lgwr_orcl sync_page Ds 4639 ora_ckpt_orcl sync_page D 11210 oracleorcl (LOCAL=NO) sync_page R+ 12535 ps axo stat,pid,cmd,wchan - -- Ds 4635 ora_dbw0_orcl sync_page Ds 4637 ora_lgwr_orcl sync_page Ds 4639 ora_ckpt_orcl sync_page D 11210 oracleorcl (LOCAL=NO) sync_page R+ 12570 ps axo stat,pid,cmd,wchan - -- so i think that box is run out of memory for disk buffers but memry is fine total used free shared buffers cached Mem: 4149084 3994552 154532 0 0 2424328 -/+ buffers/cache: 1570224 2578860 Swap: 3148700 750696 2398004 i think that this is the problem, buffer is zero and we must write directly to disk, but why buffer is zero ? - i try to google it and find nothing - is anyone can help ?

  Read the article

• Windows XP VM on VMWare ESXi 4.1 "pausing" / blocked occasionally

  - by FelixD

  We have an issue with Windows XP SP3 VMs on VMWare ESXi 4.1.0 (the free version): They sometimes seem to "pause" for several minutes. This happens rarely (maybe once a month per VM, at least noticed only that often), but still is an issue for us. It happens for three different but similar VMs on three pretty different hosts (different hardware). I have the feeling that the "pausing" is not actually the CPU blocking, but probably the harddisks, but not 100% sure. The servers have one IDE disk (C:) and one SCSI (D:) and it might be either of the two. I have seen scheduled tasks simply not starting for up to 9 minutes and then running normally again with normal speed. They were totally blocked. This is not a load issue, the VMWare hosts have average load and the VMs in question already have reserved CPU resources plus high priorities for CPU and disk. The Windows boxes run mainly MySQL, Tomcat, FileZilla server, Cygwin stuff, Java + R applications, VMWare client, Elusiva Terminal Server pro, Nagios client. Not sure if this might be related with any of that software (e.g. Elusiva). Trying to debug this, there was nothing visible in Windows Event log, other logs in C:\Windows, VMWare events etc. Unfortunately the vmware.log file ends with "Log throttled". We found that we ran into 2 VMWare bugs there: The VMWare client writes lots on bogus messages in the vmware.log, which we now disabled (log level error setting) plus the bug that VMWare does not unthrottle the log (at least so far despite VM reboots). I know there is not much guidance and that may also be the reason why I so far didn't find anything related on the web or on ServerFault, but maybe some of this rings a bell with someone? Or please direct me to what more info to post. I hope that the vmware.logs get unthrottled eventually (can't easily restart the hosts at the moment). Thanks for any input!

  Read the article

• Windows 7 Synchronize folders BUT while some files are open

  - by Nick

  I need some way to synchronize 2 drives I have. I want to do this ofter (once a day or so) There is the main drive that I want to clone/synchronize on a backup hard disk. The problem is in that there is an open TrueCrypt file mounted as a drive, and its live. If you don't know what true crypt is, basically you create a file on a hard disk and that file is encrypted. It's constantly open and modified live. Also Its pretty large. 100GB + I will use freefilesync . There are many tools that can do that. My question is, is it safe to copy the encrypted file while its open ? Does the software freeze the file in one state and copies it ? Or will I get a corrupted file on the other drive ? It was not clear to me how windows handles that. I read something about shadow copy, and the software says that it supports this. Does anyone know something on the matter that can help me ? or some software that will work ok in my scenario ? Thanks

  Read the article

• My PC suddenly reboots

  - by ChocoDeveloper

  Yesterday I opened my PC hub (after like, 5 years) to add more RAM and a new HDD. It was full of dust and balls of fluff, so I cleaned it a bit by blowing. I also removed the fan that was attached to the motherboard (I think it's there to cool the processor) and I cleaned it also by blowing and with a paintbrush, then put it back where it was (it had 4 weird plastic screws, it wasn't easy). Then I added 2 x 2Gib of RAM (Kingston 1333MHz), and the new HDD (Western Digital Caviar Blue 1TB SATA 3). I couldn't find another wire like the one my first disk had, which was thicker, but there was one that was more flat, so I plugged it and it worked fine (I also plugged the wire that I think is for the data, which looks like many little wires glued together). I'm running Ubuntu 12.04, and in the new disk I've just installed Windows 7. Between yesterday and today, two reboots ocurred while working on Ubuntu. I haven't used Windows 7 that much so I don't know if it will happen there too. So where can I begin to debug this?

  Read the article

• VMworkstation Windows 7 vm from physical partition?

  - by rich

  Hi All, i have a machine with 2 disks. my secondary drive has two partitions, one of which is a windows 7 64 boot partition. I have VM workstation and i would like to make a VM from the physical partition (described above). Ideally this would boot from the live disk, but if i can make a vmdk from the two partitions on the secondary drive that would be fine. 1 issue is the drive is 140gig raptor of which the two partitions i want are 40g and 30g partitions. the rest of the space is unallocated. So if i make a vmdk i really need it to be fixed at say 80 gig. I have converter but i don't understand how i can make the vmdk using this... specs Drive 1: this drive is a 120 SSD, running the host OS (Windows 7 64bit) - i've got 95 gigs free on this Drive 2: 140 gig raptor, partition 1 40g is also a windows 7 64bit install, partition 2 is 35 gig with program files folder on it.. sorta of needed to get the vm to work. There is 65gig unallocated on this disk. Drive 1 will host drive 2 as a VM.. my hope.

  Read the article

• Windows Server don't connect to network share

  - by user104775

  Windows Server don't connect to network share. Network share is work. Ping Blockquote Pinging 109.123.146.223 with 32 bytes of data: Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Ping statistics for 109.123.146.223: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms net view \shareaddress Blockquote System error 53 has occurred. The network path was not found. When network share was connected, I was got a error message: Blockquote \ "Mapped disk letter" refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location Network share mounted via Group Policy. Any ideas?

  Read the article

• Faster caching method

  - by pataroulis

  I have a service that provides HTML code which at some point it is not updated anymore. The code is always generated dynamically from a database with 10 million entries so each HTML code page rendering searches there for say 60 or 70 of those entries and then renders the page. So, for those expired pages, I want to use a caching system which will be VERY simple (like just enter a record with the rendered HTML and (if I need) remove it). I tried to do it file-based but the search for the existence of a file and then passing it through php to actually render it , seems like too much for what I want to do. I was thinking of doing it on mysql with a table with MEDIUMBLOBs (each page is around 100k). It would hold about 150000 such records (for now, at least). My question is: Would it be faster to let mysql do the lookup of the file and the passing to php or is the file-based approach faster? The lookup code for the file based version looks like this: $page = @file_get_contents(getCacheFilename($pageId)); if($page!=NULL) { echo $page; } else { renderAndCachePage($pageId); } which does one lookup whether it finds the file or not. The mysql table would just have an ID (the page id) and the blob entry. The disk of the system is a simple SATA raid 1 , the mysql daemon can grab up to 2.5GB of memory (i have a proxy running too, eating the rest of the 16GB of the machine. ) In general the disk is quite busy already. My not using PEAR cache, is because I think (please feel free to correct me on this) it adds overhead I do not need because the page rendering code is called about 2M times per day and I wouldn't want to go through the whole code each time (and yes, I have eaccelerator to cache the code too). Any pointer to what direction I should go, would be greatly welcome. Thanks!

  Read the article

• What Logs / Process Stats to monitor on a Ubuntu FTP server?

  - by Adam Salkin

  I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

  Read the article

• SSD won't boot anymore

  - by LordrAider

  Yesterday I put the computer to sleep. Something went wrong because it didn't go fully to sleep. So I restarted the pc and now it won't boot windows 7 anymore. It said : "Please insert valid boot device". I ran Windows 7 restore disc and tried restoring, first it said, mbr fixed. No result but now it said : "Operating system could not be loaded" I ran Windows 7 restore disc again and then it said something about a corrupt partition and that he fixed it. But got the same msg at restart about operating system not found. I ran Windows 7 restore disc again and used diskpart and watched the volumes. My SSD shows up as RAW filesystem... not as NTFS. The size of the disk seems correct. In the bios it also shows up as Healthy disk. What could went wrong and could I recover data with testdisk? I assume something went wrong with the partition :(. It's a Plextor SSD 256M2P SSD, only 3 months old. Thx in advance

  Read the article

• mdadm lvm and ext4 slowness - How can I speed it up?

  - by beatbreaker

  I can't figure out why I'm getting such terrible times out of my mdadm and in particular the lvm partitions in it. I made the raid: mdadm --create --verbose /dev/md0 --level=5 --chunk=1024 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sda1[0] sdd1[3] sdc1[2] sdb1[1] 2930279424 blocks level 5, 1024k chunk, algorithm 2 [4/4] [UUUU] I then created the physical volume, volume group, and logical volumes, I then formatted the logical volumes to ext4 using the following commands I got from here: http://busybox.net/~aldot/mkfs_stride.html mkfs.ext3 -b 4096 -E stride=256,stripe-width=768 /dev/datavg/blah Now I'm confused, I had these lvs running real quick before in mdadm but now that I've 'optimized' everything it's slower, eg, before: /dev/datavg/lv_audio: Timing buffered disk reads: 598 MB in 3.01 seconds = 198.85 MB/sec but now after: /dev/datavg/audio: Timing buffered disk reads: 198 MB in 3.00 seconds = 65.96 MB/sec That's pitiful! What's happened here? Did I not follow the instructions correctly? Can i reshape the ext4 partitons to default back to what they were? (I used defaults before and they were fine!)

  Read the article

• How do I re-configure grub options

  - by Ash

  I've searched this topic and I can't find an article with a plausable solution, to my problem. I installed windows 7 first, with 100gb of disk space. I created the necessary partitions via windows. Then I installed Ubuntu 12.04 on the remaining 400gb of disk space. During the Ubuntu installation I installed the ubuntu boot loader on /dev/sda3 which Windows (as expected never granted me the option pre-boot for which OS I wanted to boot). So I re-installed Ubuntu on that /dev/sda3 partition, overriding the windows 7 loader. Now when I boot windows 7, it runs GNU Grub, so like an infinite loop. How can I reconfigure grub to say: /dev/sda is the bootloader. /dev/sda2 is Windows. /dev/sda3 is Ubuntu. Re-installing windows and my partitions isn't an option, purchasing software for windows isn't an option (theres a reason I use linux, it's not because it's free, because you don't have to install lots of shit to get stuff working, and over-all it's a robust OS).

  Read the article

• Partition Magic 8 made TrueCrypt partition invisible

  - by gmancoda

  Partition Magic 8 took a dump on my TrueCrypt partition... and I let it happen! And now I am left with cleaning up the mess. In short, my encrypted partition is now invisible. TestDisk analysis says of the disk containing the encrypted partition: "Space conflict between the following two partitions". From the googling and searching on various sites, I have learned the following: Hex editing is beyond me. Partition recovery tools are useless. I am not ready to drop the big bucks for professional help. ... that I should have kept an external backup of the Volume header. Now, to get back the volume header, I am planning on recreating the exact same partitions on a new disk of the exact same model, and then encrypting it with the exact same password/keyfiles, and then exporting its volume header to a file. Finally, I hope to be able to restore this volume header on to my damaged drive. Before I undertake this plan, I would like to know if anyone else out there has tried it and, if so, how successful they were. All other suggestions and tips and welcome!! Thanks.

  Read the article

• Raspberry Pi how to format HDD

  - by Speed

  Hi I am very new to Raspberry Pi environment, so looking for a bit of help to format a usb hard disk drive. I ran lsblk and got sda 8:0 0 37.3G 0 disk sda1 8:1 0 37.3G 0 part looking on web, if tried the following "sudo mkfs.ext4 /dev/sda1 -L USB40gb" it did something but when I tried to mount the drive again, it still showed the files that were there before and I can not create new file/folder "Error creating directory: Permission denied" I am writing this from my windows 8.1 pc so can not cut and paste from the pi. trying to format its output is a bit hard. Oh, there is Nothing written after the word "part" above. There use to be /media/USB40gb so I have done something because this has disappeared. I am using PCManFM 0.9.10 It does not have a format option, which would make life a lot easier, but then its not windows. I think I am running the basic linux os for the pi. It boots to a graphic environment, but I do not know how to advise what it is. I think its OpenBox 2.0.4 Thanks in advance Speed PS: I reran the format string above but this time I changed the label to read USB37gb. I did this to confirm that I was in fact formatting the right drive. Low and behold, it actually formatted the drive, wiping everything from it. Great ... testing it by creating a new folder on the drive and get error msg Permission Denied! So I have fixed the formatting issue by trial and error but still can't use the drive... Suggestions anyone?

  Read the article

• Debian boot problems

  - by psp

  I've got Debian server with one disk. No dual boot or anything fancy. Just Debian 6.0 (Squeeze). I rebooted the server today and now it doesn't boot. I get the following (from GRUB): error: hd0,msdos out of disk I then get a grub prompt grub rescue> I've been googling for ages with no luck. /etc/fstab > #/etc/fstab: static file system information. > # > # <file system> <mount point> <type> <options> <dump> <pass> > aufs / aufs rw 0 0 > tmpfs /tmp tmpfs nosuid,nodev 0 0 I've run debian rescue mode and looked through the syslog. I see hundreds of entries like this: Jun 30 22:51:08 kernel: [ 615.217382] sd 2:0:0:0: [sda] Unhandled error code Jun 30 22:51:08 kernel: [ 615.217385] sd 2:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Jun 30 22:51:08 kernel: [ 615.217389] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 30 22:51:08 kernel: [ 615.217399] end_request: I/O error, dev sda, logical block 0 Jun 30 22:51:08 kernel: [ 615.217402] Buffer I/O error on device sda, logical block 0

  Read the article

• Windows 8 doesn't start up after installation

  - by Raj BD

  I have a DELL INSPIRON n5110 machine running Windows 7 Home Premium 64-bit. It has 6GB of RAM and 500 GB hard disk capable to run any Windows and Linux system. And I recently attempted to install Windows 8 in the machine. Installation goes fine and smooth until the final stage when windows is done installing and GETS DEVICES READY. When GETTNG DEVICES READY reaches about 60%, the screen goes blank with the machine running. After a while it reboots. And after the new Windows Logo with dotted circles are done showing up, the screen goes blank again (when we'd expect login screen to show up). There is not even a cursor. I can see the HARD DISK ACTIVITY LED blinking but nothing shows up in the screen. I've tried CLEAN INSTALL several times. The DVD is fine, it installed and worked well in my friends' laptop PCs. I tried installing both PRO version and ENTERPRISE version and both 32-bit and 64-bit. But the problem was same everytime. Finally, I had to reinstall Windows 7 which installed and ran without any problem. The problem, we can guess, is GRAPHICS perhaps. I have Intel SandyBridge Graphics Mobile Chipset (Intel HD Graphics 3000). But if Windows 7 and Linux distrubutions like Mint and BackTrack can run on the machine, why on earth, would Windows 8 not run?

  Read the article

• Picasa duplicates everything into a `$My Pictures` folder.

  - by Barend

  My parents have a Windows XP laptop running Picasa, Dutch version of both. It's configured to put imported photos in C:\Documents and Settings\user\Mijn documenten\Mijn afbeeldingen, which is Windows XP's default My Pictures folder localized to Dutch. A while back I noticed disk space was going much faster than it should be. Turns out there was a Documents and Settings\user\Mijn documenten\$My Pictures pretty much the same size as the original one. This was well over a year ago. I figured it to be an internationalization bug, the $My Pictures thing looks like a placeholder that didn't get resolved. I figured it'd get fixed soon. It didn't. I threw out Picasa, tediously cleaned up the mess it left behind and replaced it by Windows Live Photo Gallery. My parents found WLPG to be unworkable and asked to get Picasa back. I reinstalled it, by now it's at 3.8.0 (build 117.29, 0). Wouldn't you have it, the mystery $My Pictures folder is back, 25GB of disk space has evaporated and it's the same mess it used to be. What's going on here? How do I stop it doing this?

  Read the article

• Recover WinForms from dll

  - by Ramiz Uddin

  We think most of the source has been recovered through Reflector .NET. A utility which export the dll as C# source. The only missing part is WinForms which is not included when Reflector .NET export the dll source. Is there any way to get the WinForms recover from dll? Thanks.

  Read the article

• Convert excel document (xls) to a plist

  - by John

  I have a pretty straightforward excel document in which I need to use the data in an iPhone app. The xls document has 6 columns, 200 plus rows. I would like to create a plist from the xls document and other than manual copy/paste, is there a means to convert one to the other? Anyone written a macro on the excel side or a utility (perl, etc) to make such a conversion? Thanks John iPhoneDevTips

  Read the article

• Unable to jstat WebSphere Application Server PID

  - by Nicholas Key

  Hi stackoverflow'ers, I've spent the entire day trying to find relevant resources about doing jstat on the WebSphere Process ID. I have WebSphere Application Server 7.0 installed on Windows 2003. I did this command: jstat -gcutil [PID] 1000 But I kept getting "[PID] not found" message. Any idea how to resolve this issue? Or Java's jstat utility does not probe into IBM's derivative JVM? Nicholas

  Read the article

• Error handling in VS/C# build events.

  - by ProfK

  I have just written a small utility to be used in a pre-build event. The utilty works fine when run as standalone, but does nothing when used in the build event. Is there a standard way of noticing and dealing with error conditions in build events, or is that the domain of more advanced build control?

  Read the article

• Make svcutil.exe generate Properties with no Order attribute

  - by Luis Filipe

  I use svcutil.exe to generate proxy classes from a hosted WebService created by WebSphere that uses Java under the hood. I am using the XmlSerializer instead of DataContractSerializer and targeting Framework v3.5 with VS2010 The proxy classes are generated with the following attribute for each property [System.Xml.Serialization.XmlArrayAttribute(Order=20)] How can i tell the utility to suppress generating the Order parameter?

  Read the article

• How to get BinarySecurityToken into the wcf soap request

  - by Mr Bell

  I need to sign my soap request to a 3rd party. The provided an example what the call should look like. And I am trying, rather unsuccessfully to make this call with wcf. I need to make a wcf soap call where the header contains BinarySecurityToken, Signature, and SecurityTokenReference. Here is the example they sent me (with some of the values omitted) I have a certificate for signing, but I cant for the life of me figure out how to make this work <?xml version="1.0" encoding="UTF-8"?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soapenv:Header><wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:BinarySecurityToken EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" wsu:Id="SecurityToken-..omitted.." xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">..omitted..</wsse:BinarySecurityToken> <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#"> <ds:SignedInfo> <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> <ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/> <ds:Reference URI="#Body"> <ds:Transforms> <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> </ds:Transforms> <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/> <ds:DigestValue>..omitted...</ds:DigestValue> </ds:Reference> </ds:SignedInfo> <ds:SignatureValue> ..omitted.. </ds:SignatureValue> <ds:KeyInfo><wsse:SecurityTokenReference><wsse:Reference URI="#SecurityToken-..omitted.." ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/></wsse:SecurityTokenReference></ds:KeyInfo></ds:Signature></wsse:Security></soapenv:Header><soapenv:Body wsu:Id="Body"><in0 xmlns="http://test.3rdParty.com">123</in0></soapenv:Body></soapenv:Envelope>

  Read the article

• VS 2010 migration issue – XSD.EXE can’t process Framework 4.0 assemblies

  - by Dirk

  In VS 2008 / SDK 6.0 I used the /t option of the XSD utility to automatically generate XSD files from existing assemblies / classes. With VS 2010 and SDK 7.0 this isn’t working any longer, because the XSD.EXE can’t process the new Framework 4.0 assemblies. It stated to be a Framework 2.0 tool and can’t process assemblies of newer runtimes. Where is my mistake?

  Read the article

• what is the difference between ELF files and bin files

  - by Manik Mahajan

  The final images produced by compliers contain both bin file and extended loader format ELf file ,what is the difference between too , especially the utility of ELF file.

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >