Search Results

Search found 6774 results on 271 pages for 'special locations'.

Page 210/271 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

  • Android Remote Service Keeps Restarting

    - by user244190
    Ok so I've built an app that uses a remote service to do some real time GPS tracking. I am using the below code to start and bind to the service. The remote service uses aidl, sets up a notification icon, runs the GPS and locationListener. In onLocationChanged, a handler sends data back to the caller via the callback. Pretty much straight out of the examples and resources online. I want to allow the service to continue running even if the app closes. When the app is restarted, I want the app to again bind to the service (using the existing service if running) and again receive data from the tracker. I currently have the app mode set to singleTask and cannot use singleinstance due to another issue. My problem is that quit often even after the app and service are shut down either from the app itself, or from AdvancedTaskKiller, or a Forceclose, the service will restart and initialize the GPS. touching on the notification will open the app. I again stop the tracking which removes the notification and turns off the GPS Close the app, and again after a few seconds the service restarts. The only way to stop it is to power off the phone. What can I do to stop this from happening. Does it have to do with the mode of operation? START_NOT_STICKY or START_REDELIVER_INTENT? Or do I need to use stopSelf()? My understanding is that if the service is not running when I use bindService() that the service will be created...so do I really need to use start/stopService also? I thought I would need to use it if I want the service to run even after the app is closed. That is why i do not unbind/stop the service in onDestroy(). Is this correct? I've not seen any other info an this, so I,m not sure where to look. Please Help! Thanks Patrick //Remote Service Startup try{ startService(); }catch (Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } } try{ bindService(); }catch (Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } //Remote service shutdown try { unbindService(); }catch(Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } try{ stopService(); }catch(Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } private void startService() { if( myAdapter.trackServiceStarted() ) { if(SETTING_DEBUG_MODE) Toast.makeText(this, "Service already started", Toast.LENGTH_SHORT).show(); started = true; if(!myAdapter.trackDataExists()) insertTrackData(); updateServiceStatus(); } else { startService( new Intent ( "com.codebase.TRACKING_SERVICE" ) ); Log.d( "startService()", "startService()" ); started = true; updateServiceStatus(); } } private void stopService() { stopService( new Intent ( "com.codebase.TRACKING_SERVICE" ) ); Log.d( "stopService()", "stopService()" ); started = false; updateServiceStatus(); } private void bindService() { bindService(new Intent(ITrackingService.class.getName()), mConnection, Context.BIND_AUTO_CREATE); bindService(new Intent(ITrackingSecondary.class.getName()), mTrackingSecondaryConnection, Context.BIND_AUTO_CREATE); started = true; } private void unbindService() { try { mTrackingService.unregisterCallback(mCallback); } catch (RemoteException e) { // There is nothing special we need to do if the service // has crashed. e.getMessage(); } try { unbindService(mTrackingSecondaryConnection); unbindService(mConnection); } catch (Exception e) { // There is nothing special we need to do if the service // has crashed. e.getMessage(); } started = false; } private ServiceConnection mConnection = new ServiceConnection() { public void onServiceConnected(ComponentName className, IBinder service) { // This is called when the connection with the service has been // established, giving us the service object we can use to // interact with the service. We are communicating with our // service through an IDL interface, so get a client-side // representation of that from the raw service object. mTrackingService = ITrackingService.Stub.asInterface(service); // We want to monitor the service for as long as we are // connected to it. try { mTrackingService.registerCallback(mCallback); } catch (RemoteException e) { // In this case the service has crashed before we could even // do anything with it; we can count on soon being // disconnected (and then reconnected if it can be restarted) // so there is no need to do anything here. } } public void onServiceDisconnected(ComponentName className) { // This is called when the connection with the service has been // unexpectedly disconnected -- that is, its process crashed. mTrackingService = null; } }; private ServiceConnection mTrackingSecondaryConnection = new ServiceConnection() { public void onServiceConnected(ComponentName className, IBinder service) { // Connecting to a secondary interface is the same as any // other interface. mTrackingSecondaryService = ITrackingSecondary.Stub.asInterface(service); try{ mTrackingSecondaryService.setTimePrecision(SETTING_TIME_PRECISION); mTrackingSecondaryService.setDistancePrecision(SETTING_DISTANCE_PRECISION); } catch (RemoteException e) { // In this case the service has crashed before we could even // do anything with it; we can count on soon being // disconnected (and then reconnected if it can be restarted) // so there is no need to do anything here. } } public void onServiceDisconnected(ComponentName className) { mTrackingSecondaryService = null; } }; //TrackService onDestry() public void onDestroy() { try{ if(lm != null) { lm.removeUpdates(this); } if(mNotificationManager != null) { mNotificationManager.cancel(R.string.local_service_started); } Toast.makeText(this, "Service stopped", Toast.LENGTH_SHORT).show(); }catch (Exception e){ Toast.makeText(this, e.getMessage(), Toast.LENGTH_SHORT).show(); } // Unregister all callbacks. mCallbacks.kill(); // Remove the next pending message to increment the counter, stopping // the increment loop. mHandler.removeMessages(REPORT_MSG); super.onDestroy(); } ServiceConnectionLeaked: I'm seeing a lot of these: 04-21 09:25:23.347: ERROR/ActivityThread(3246): Activity com.codebase.GPSTest has leaked ServiceConnection com.codebase.GPSTest$6@4482d428 that was originally bound here 04-21 09:25:23.347: ERROR/ActivityThread(3246): android.app.ServiceConnectionLeaked: Activity com.codebase.GPSTest has leaked ServiceConnection com.codebase.GPSTest$6@4482d428 that was originally bound here 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$PackageInfo$ServiceDispatcher.<init>(ActivityThread.java:977) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$PackageInfo.getServiceDispatcher(ActivityThread.java:872) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ApplicationContext.bindService(ApplicationContext.java:796) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.content.ContextWrapper.bindService(ContextWrapper.java:337) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.bindService(GPSTest.java:2206) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.onStartStopClick(GPSTest.java:1589) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.onResume(GPSTest.java:1210) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.Instrumentation.callActivityOnResume(Instrumentation.java:1149) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.Activity.performResume(Activity.java:3763) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.performResumeActivity(ActivityThread.java:2937) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleResumeActivity(ActivityThread.java:2965) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2516) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleRelaunchActivity(ActivityThread.java:3625) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.access$2300(ActivityThread.java:119) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1867) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.os.Handler.dispatchMessage(Handler.java:99) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.os.Looper.loop(Looper.java:123) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.main(ActivityThread.java:4363) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at java.lang.reflect.Method.invokeNative(Native Method) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at java.lang.reflect.Method.invoke(Method.java:521) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at dalvik.system.NativeStart.main(Native Method) And These: Is this ok, or do I need to make sure i deactivate/close 04-21 09:58:55.487: INFO/dalvikvm(3440): Uncaught exception thrown by finalizer (will be discarded): 04-21 09:58:55.487: INFO/dalvikvm(3440): Ljava/lang/IllegalStateException;: Finalizing cursor android.database.sqlite.SQLiteCursor@447ef258 on gps_data that has not been deactivated or closed 04-21 09:58:55.487: INFO/dalvikvm(3440): at android.database.sqlite.SQLiteCursor.finalize(SQLiteCursor.java:596) 04-21 09:58:55.487: INFO/dalvikvm(3440): at dalvik.system.NativeStart.run(Native Method)

    Read the article

  • HTTP Builder/Groovy - lost 302 (redirect) handling?

    - by Misha Koshelev
    Dear All: I am reading here http://groovy.codehaus.org/modules/http-builder/doc/handlers.html "In cases where a response sends a redirect status code, this is handled internally by Apache HttpClient, which by default will simply follow the redirect by re-sending the request to the new URL. You do not need to do anything special in order to follow 302 responses." This seems to work fine when I simply use the get() or post() methods without a closure. However, when I use a closure, I seem to lose 302 handling. Is there some way I can handle this myself? Thank you p.s. Here is my log output showing it is a 302 response [java] FINER: resp.statusLine: "HTTP/1.1 302 Found" Here is the relevant code: // Copyright (C) 2010 Misha Koshelev. All Rights Reserved. package com.mksoft.fbbday.main import groovyx.net.http.ContentType import java.util.logging.Level import java.util.logging.Logger class HTTPBuilder { def dataDirectory HTTPBuilder(dataDirectory) { this.dataDirectory=dataDirectory } // Main logic def logger=Logger.getLogger(this.class.name) def closure={resp,reader-> logger.finer("resp.statusLine: \"${resp.statusLine}\"") if (logger.isLoggable(Level.FINEST)) { def respHeadersString='Headers:'; resp.headers.each() { header->respHeadersString+="\n\t${header.name}=\"${header.value}\"" } logger.finest(respHeadersString) } def text=reader.text def lastHtml=new File("${dataDirectory}${File.separator}last.html") if (lastHtml.exists()) { lastHtml.delete() } lastHtml<<text new XmlSlurper(new org.cyberneko.html.parsers.SAXParser()).parseText(text) } def processArgs(args) { if (logger.isLoggable(Level.FINER)) { def argsString='Args:'; args.each() { arg->argsString+="\n\t${arg.key}=\"${arg.value}\"" } logger.finer(argsString) } args.contentType=groovyx.net.http.ContentType.TEXT args } // HTTPBuilder methods def httpBuilder=new groovyx.net.http.HTTPBuilder () def get(args) { httpBuilder.get(processArgs(args),closure) } def post(args) { args.contentType=groovyx.net.http.ContentType.TEXT httpBuilder.post(processArgs(args),closure) } } Here is a specific tester: #!/usr/bin/env groovy import groovyx.net.http.HTTPBuilder import groovyx.net.http.Method import static groovyx.net.http.ContentType.URLENC import java.util.logging.ConsoleHandler import java.util.logging.Level import java.util.logging.Logger // MUST ENTER VALID FACEBOOK EMAIL AND PASSWORD BELOW !!! def email='' def pass='' // Remove default loggers def logger=Logger.getLogger('') def handlers=logger.handlers handlers.each() { handler->logger.removeHandler(handler) } // Log ALL to Console logger.setLevel Level.ALL def consoleHandler=new ConsoleHandler() consoleHandler.setLevel Level.ALL logger.addHandler(consoleHandler) // Facebook - need to get main page to capture cookies def http = new HTTPBuilder() http.get(uri:'http://www.facebook.com') // Login def html=http.post(uri:'https://login.facebook.com/login.php?login_attempt=1',body:[email:email,pass:pass]) assert html==null // Why null? html=http.post(uri:'https://login.facebook.com/login.php?login_attempt=1',body:[email:email,pass:pass]) { resp,reader-> assert resp.statusLine.statusCode==302 // Shouldn't we be redirected??? // http://groovy.codehaus.org/modules/http-builder/doc/handlers.html // "In cases where a response sends a redirect status code, this is handled internally by Apache HttpClient, which by default will simply follow the redirect by re-sending the request to the new URL. You do not need to do anything special in order to follow 302 responses. " } Here are relevant logs: FINE: Receiving response: HTTP/1.1 302 Found Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << HTTP/1.1 302 Found Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Cache-Control: private, no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Expires: Sat, 01 Jan 2000 00:00:00 GMT Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Location: http://www.facebook.com/home.php? Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << P3P: CP="DSP LAW" Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Pragma: no-cache Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Set-Cookie: datr=1275687438-9ff6ae60a89d444d0fd9917abf56e085d370277a6e9ed50c1ba79; expires=Sun, 03-Jun-2012 21:37:24 GMT; path=/; domain=.facebook.com Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Set-Cookie: lxe=koshelev%40post.harvard.edu; expires=Tue, 28-Sep-2010 15:24:04 GMT; path=/; domain=.facebook.com; httponly Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Set-Cookie: lxr=deleted; expires=Thu, 04-Jun-2009 21:37:23 GMT; path=/; domain=.facebook.com; httponly Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Set-Cookie: pk=183883c0a9afab1608e95d59164cc7dd; path=/; domain=.facebook.com; httponly Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Content-Type: text/html; charset=utf-8 Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << X-Cnection: close Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Date: Fri, 04 Jun 2010 21:37:24 GMT Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.DefaultClientConnection receiveResponseHeader FINE: << Content-Length: 0 Jun 4, 2010 4:37:22 PM org.apache.http.client.protocol.ResponseProcessCookies processCookies FINE: Cookie accepted: "[version: 0][name: datr][value: 1275687438-9ff6ae60a89d444d0fd9917abf56e085d370277a6e9ed50c1ba79][domain: .facebook.com][path: /][expiry: Sun Jun 03 16:37:24 CDT 2012]". Jun 4, 2010 4:37:22 PM org.apache.http.client.protocol.ResponseProcessCookies processCookies FINE: Cookie accepted: "[version: 0][name: lxe][value: koshelev%40post.harvard.edu][domain: .facebook.com][path: /][expiry: Tue Sep 28 10:24:04 CDT 2010]". Jun 4, 2010 4:37:22 PM org.apache.http.client.protocol.ResponseProcessCookies processCookies FINE: Cookie accepted: "[version: 0][name: lxr][value: deleted][domain: .facebook.com][path: /][expiry: Thu Jun 04 16:37:23 CDT 2009]". Jun 4, 2010 4:37:22 PM org.apache.http.client.protocol.ResponseProcessCookies processCookies FINE: Cookie accepted: "[version: 0][name: pk][value: 183883c0a9afab1608e95d59164cc7dd][domain: .facebook.com][path: /][expiry: null]". Jun 4, 2010 4:37:22 PM org.apache.http.impl.client.DefaultRequestDirector execute FINE: Connection can be kept alive indefinitely Jun 4, 2010 4:37:22 PM groovyx.net.http.HTTPBuilder doRequest FINE: Response code: 302; found handler: post302$_run_closure2@7023d08b Jun 4, 2010 4:37:22 PM groovyx.net.http.HTTPBuilder doRequest FINEST: response handler result: null Jun 4, 2010 4:37:22 PM org.apache.http.impl.conn.SingleClientConnManager releaseConnection FINE: Releasing connection org.apache.http.impl.conn.SingleClientConnManager$ConnAdapter@605b28c9 You can see there is clearly a location argument. Thank you Misha

    Read the article

  • What is the difference between Anycast and GeoDNS / GeoIP wrt HA?

    - by Riyad
    Based on the Wikipedia description of Anycast, it includes both the distribution of a domain-name-to-many-IP-mapping across many DNS servers as well as replying to clients with the most geographically close (or fastest) server. In the context of a globally distributed, highly available site like google.com (or any CDN service with many global edge locations) this sounds like the two key features one would need. DNS services like Amazon's Route53, EasyDNS and DNSMadeEasy all advertise themselves as Anycast-enabled networks. Therefore my assumption is that each of these DNS services transparently offer me those two killer features: multi-IP-to-domain mapping AND routing clients to the closest node. However, each of these services seem to separate out these two functionalities, referring to the 2nd one (routing clients to closest node) as "GeoDNS", "GeoIP" or "Global Traffic Director" and charge extra for the service. If a core tenant of an Anycast-capable system is to already do this, why is this functionality being earmarked as this extra feature? What is this "GeoDNS" feature doing that a standard Anycast DNS service won't do (according to the definition of Anycast from Wikipedia -- I understand what is being advertised, just not why it isn't implied already). I get extra-confused when a DNS service like Route53 that doesn't support this nebulous "GeoDNS" feature lists functionality like: Fast – Using a global anycast network of DNS servers around the world, Route 53 is designed to automatically route your users to the optimal location depending on network conditions. As a result, the service offers low query latency for your end users, as well as low update latency for your DNS record management needs. ... which sounds exactly like what GeoDNS is intended to do, but geographically directing clients is something they explicitly don't support it yet. Ultimately I am looking for the two following features from a DNS provider: Map multiple IP addresses to a single domain name (like google.com, amazon.com, etc. does) Utilize a DNS service that will respond to client requests for that domain with the IP address of the nearest server to the requestee. As mentioned, it seems like this is all part of an "Anycast" DNS service (all of which these services are), but the features and marketing I see from them suggest otherwise, making me think I need to learn a bit more about how DNS works before making a deployment choice. Thanks in advance for any clarifications.

    Read the article

  • IRP_MJ_WRITE latency up to 15 seconds

    - by racitup
    We have written an application that performs small (22kB) writes to multiple files at once (one thread performing asynchronous queued writes to multiple locations on behalf of other threads) on the same local volume (RAID1). 99.9% of the writes are low-latency but occasionally (maybe every minute or two) we get one or two huge latency writes (I have seen 10 seconds and above) without any real explanation. Platform: Win2003 Server with NTFS. Monitoring: Sysinternals Process Monitor (see link below) and our own application logging. We have tried multiple things to try and solve this that have been gleaned from a few websites, e.g.: Making the first part of file names unique to aid 8.3 name generation Writing files to multiple directories Changing Intel Disk Write Caching Windows File/Printer Sharing Minimize memory used Balance Maximize data throughput for file sharing Maximize data throughput for network applications System-Advanced-Performance-Advanced NtfsDisableLastAccessUpdate - use fsutil behavior set disablelastaccess 1 disable 8.3 name generation - use "fsutil behavior set disable8dot3 1" + restart Enable a large size file system cache Disable paging of the kernel code IO Page Lock Limit Turn Off (or On) the Indexing Service But nothing seems to make much difference. There's a whole host of things we haven't tried yet but we wondered if anyone had come across the same problem, a reason and a solution (programmatic or not)? We can reproduce the problem using IOMeter and a simple setup: Start IOMeter and remove all but the first worker thread in 'Topology' using the disconnect button. Select the Worker thread and put a cross in the box next to the disk you want to use in the Disk Targets tab and put '2000000' in Maximum Disk Size (NOTE: must have at least 1GB free space; sector size is 512 bytes) Next create a new access specification and add it to the worker thread: Transfer Request Size = 22kB 100% Sequential Percent of Access Spec = 100% Percent Read/Write = 100% Write Change Results Display Update Frequency to 5 seconds, Test Setup Run Time to 20 seconds and both 'Number of Workers to Spawn Automatically' settings to zero. Select the Worker Thread in the Topology panel and hit the Duplicate Worker button 59 times to create 60 threads with identical settings. Hit the 'Go' button (green flag) and monitor the Results tab. The 'Maximum I/O Response Time (ms)' always hits at least 3500 on our machine. Our machine isn't exactly slow (Xeon 8 core rack server with 4GB and onboard RAID). I'd be interested to see what other people get. We have a feeling it might be something to do with the NTFS filesystem (ours is currently 75% full of fragmented files) and we are going to try a few things around this principle. But it is also related to disk performance since we don't see it on a RAMDisk and it's not as severe on a RAID10 array. Any help is much appreciated. Richard Right-click and select 'Open Link in New Tab': ProcMon Result

    Read the article

  • Using nginx's proxy_redirect when the response location's domain varies

    - by Chalky
    I am making an web app using SoundCloud's API. Requesting an MP3 to stream involves two requests. I'll give an example. Firstly: http://api.soundcloud.com/tracks/59815100/stream This returns a 302 with a temporary link to the actual MP3 (which varies each time), for example: http://ec-media.soundcloud.com/xYZk0lr2TeQf.128.mp3?ff61182e3c2ecefa438cd02102d0e385713f0c1faf3b0339595667fd0907ea1074840971e6330e82d1d6e15dd660317b237a59b15dd687c7c4215ca64124f80381e8bb3cb5&AWSAccessKeyId=AKIAJ4IAZE5EOI7PA7VQ&Expires=1347621419&Signature=Usd%2BqsuO9wGyn5%2BrFjIQDSrZVRY%3D The issue I had was that I am attempting to load the MP3 via JavaScript's XMLHTTPRequest, and for security reasons the browser can't follow the 302, as ec-media.soundcloud.com does not set a header saying it is safe for the browser to access via XMLHTTPRequest. So instead of using the SoundCloud URL, I set up two locations in nginx, so the browser only interacts with the server my app is hosted on and no security errors come up: location /soundcloud/tracks/ { # rewrite URL to match api.soundcloud.com's URL structure rewrite \/soundcloud\/tracks\/(\d*) /tracks/$1/stream break; proxy_set_header Host api.soundcloud.com; proxy_pass http://api.soundcloud.com; # the 302 will redirect to /soundcloud/media instead of the original domain proxy_redirect http://ec-media.soundcloud.com /soundcloud/media; } location /soundcloud/media/ { rewrite \/soundcloud\/media\/(.*) /$1 break; proxy_set_header Host ec-media.soundcloud.com; proxy_pass http://ec-media.soundcloud.com; } So myserver/soundcloud/tracks/59815100 returns a 302 to /myserver/soundcloud/media/xYZk0lr2TeQf.128.mp3...etc, which then forwards the MP3 on. This works! However, I have hit a snag. Sometimes the 302 location is not ec-media.soundcloud.com, it's ak-media.soundcloud.com. There are possibly even more servers out there and presumably more could appear at any time. Is there any way I can handle an arbitrary 302 location without having to manually enter each possible variation? Or is it possible for nginx to handle the redirect and return the response of the second step? So myserver/soundcloud/tracks/59815100 follows the 302 behind the scenes and returns the MP3? The browser automatically follows the redirect, so I can't do anything with the initial response on the client side. I am new to nginx and in a bit over my head so apologies if I've missed something obvious, or it's beyond the scope of nginx. Thanks a lot for reading.

    Read the article

  • So I want to separate my Program Files from the hard disk with the other system files. What is the b

    - by grg-n-sox
    So I am running Windows 7 as my only OS. I have two hard drives on my computer. The first one is a 74GB Western Digital 10K RPM Raptor. The second one is a 1TB Seagate Barracuda (couldn't remember if it was a 7200.12 or some other decimal after the 7200). The OS in installed to the Raptor and I am just using the Barracuda for storage. With this setup, in case you couldn't guess already, the Raptor fills up quick and I am constantly having to maintain file locations. And although it is nice to have that quicker boot time and program loading, the time spent maintaining the drive makes me waste more time overall. So I am looking for a way to try to keep it clear while still keeping up system loading speeds. A performance hit on games and such is easily acceptable and as long as I can guarantee a 5GB space on the Raptor, I can always just temporarily move the disc image there. So I am figuring that having games installed like Boarderlands and Mass Effect, as well as having large files such as linux distro DVD disc images in My Documents, I probably should be moving my personal files and Program Files directories to the Barracuda. I currently have folders on the Barracuda for this, but this means routinely copying files over and I can't really do anything with the Program Files folder that already exists. The best I can do is remember to designate the install directory of any program installation to the alternative install directory, which I can't seem to get to ever work right with Steam. With that in mind, is there a way that is not too drastic to let me just change some folders and system settings once and everything works fine afterwards for my setup? I have considered just reinstalling Windows 7 to the Barracuda but that would defeat the purpose of the Raptor except for running disc images off of. I am also heard a bit about being able to use symlinks to fix this, but I have also heard that symlinks in Windows are not necessarily the same and not as well supported on Windows. An example a friend mentioned was something about how if you have a symlink in Windows on a small hard drive to a large hard drive and the contents the symlink points to is larger than the small hard drive's capacity, then Windows will think the smaller hard drive is full. So is there a fix/workaround that will let me use symlinks across hard drives without the issues or is there a better solution I am not being told about, not mentioning, or not thinking of?

    Read the article

  • Getting Classic ASP to work in .js files under IIS 7

    - by Abdullah Ahmed
    I am moving a clients classic asp webapp to a new IIS7 based server. The site contains some .js files which have javascript but also classic asp in <% % tags which contains a bunch of conditional statements designed to spit out pieces of javascript based on session state variables. Here's a brief example of what the file could be like.... var arrHOFFSET = -1; var arrLeft ="<"; var arrRight = ">"; <% If ((Session("dashInv") = "True") And ((Session("systemLevelStaff") = "4") Or (Session("systemLevelCompany") = "4"))) Then %> addMainItem("/MgmtTools/WelcomeInventory.asp?wherefrom=salesMan","",81,"center","","",0,0,"","","","",""); <% Else %> <% If (Session("dashInv") = "False") And ((Session("systemLevelStaff") = "4") Or (Session("systemLevelCompany") = "4")) Then %> <% Else %> addMainItem("/calendar/welcome.asp","",81,"center","","",0,0,"","","","",""); <% End If %> <% End If %> defineSubmenuProperties(135,"center","center",-3,0,"","","","","","",""); Currently this file (named custom.js for example) will start throwing js errors, because the server doesnt seem to recognize the asp code in it and therefore does not parse it. I know I need to somehow specify that a .js file should also be treated like an .asp file and run through parsing it. However I am not sure how to go about doing this. Here is what I've tried so far... Under the Server node in IIS under HANDLER MAPPINGS I created a new Script Map with the following settings. Request Path: *.js Executable: C:\Windows\System32\inetsrv\asp.dll Name: ASPClassicInJSFiles Mapping: Invoke Handler only if request is mapped to : File Verbs: All verbs Access: Script I also created a similar handler under the site node itself. Under MIME Types .js is defined as application/x-javascript None of these work. If I simply rename the file to have .asp extension then things work, however this app is poorly coded and has literally 100's of files with the .js files included in them under various names and locations, so rename, search and replace is the last option I have.

    Read the article

  • Setting up a very mixed Active Directory network to work with PowerShell Remote Administration

    - by erictheavg
    Summary: I want to be able to monitor the computers on my network, but don't need it to be automated. We're too small to purchase anything like MOM, but too big to do anything manually (~100 machines in two locations). I just keep running into issues, and was wondering if there's a master list of Group Policy settings I can distribute to my environment to get Remote Powershell working. Environment: Our AD network is pretty mixed. The end users have XP SP3, Win 7, and Win 7 x64. The servers include Win2k3 SP2, Win2k8, Win2k8 x64, Win2k8 R2, and Win2k8 R2 x64. Details: I'm trying to get it to work with Remote Powershell, but I run into errors like the following: Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Default authentication may be used with an IP address under the following conditions: the transport is HTTPS or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure TrustedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set TrustedHosts run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo : OpenError: (:) [], PSRemotingTransportException + FullyQualifiedErrorId : PSSessionStateBroken Then I go to the computer (Win2k3 SP2 server) and run winrm quickconfig per the recommendations via google, and it says: Make these changes [y/n]? y WinRM has been updated to receive requests. WinRM service started. WSManFault Message = The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". Error number: -2144108526 0x80338012 The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". That's right. It tells me to remedy my winrm quickconfig failure by running winrm quickconfig. I don't want to band-aid this project one google search at a time. I'm sure there is a step-by-step tutorial out there on how to set up a network for powershell remote administration. Does anyone know of one? Books are acceptable. Thanks in advance! I didn't think my question would get this long.

    Read the article

  • Suggestions for sharing and using data between Ubuntu and Windows 7 dual boot

    - by wizjany
    Note: TL;DR, scroll to bottom for summary. I recently set up my computer for a dual boot between Ubuntu 9.10 and Windows 7. My current drive setup is as follows. | A1 | A2 | | B1 | B2 | B3 | A1: 100 mb, windows 7 "System Reserved" boot partition A2: 230 gb, data section, this one needs to be shared between the operating systems B1: 125 gb, windows 7 OS B2: 123 gb, ubuntu OS B3: 2gb, linux swap space Pretty much i want to have my documents, music, pictures, videos, etc accessible from both operating systems. My first attempt involved making the data (a2) partition NTFS, and moving my home folder from ubuntu to the data partition. However, as I read NTFS does not work nice with permission, and it messed up my home folder. My next idea is one of the following: 1) format the data partition to ext2/3/4 and move my home folder from linux there, and get a driver to read ext partitions in windows 7. The problem with that is that most of the ext drivers/software are not compatible with windows 7 or do not integrate with windows explorer (I really don't want to open a separate software window just to access my data, plus it's probably not compatible with other software.) http://www.fs-driver.org/ looks promising, but I'm not sure how it works with ext4 and windows 7 (not officially supported, when trying in vista compatibility mode, it tells me I need to format the ext drive to use it). My next idea, 2) keep the home folder in ubuntu where it is, but create symlinks for the Documents, Music, etc folders to an NTFS formatted Data (A2) partition, and add those locations to the windows 7 libraries. I'm not totally sure how the permissions would work out, but it should be fine since it's only the documents, music, etc and not the important config files in the rest of /home/user/. Correct me if I'm wrong. Currently, symlinks is my best idea, although i'm not sure how it will work. Any suggestions, additions to my ideas, links, pointers, whatever would be greatly appreciated. Even if it means i should reformat both my drives and repartition (2 250gb drives if you want to suggest a setup for that), I won't be too opposed if that's the best suggestion (I've gone through the format/install/format/reinstall process 5 times over the past 3 days, once more won't hurt me). TL;DR, summary: I have two hard drives. One is partitioned for Ubuntu and Windows 7, the second one I want accessible to both operating systems to store documents, music, pictures, videos, etc. Suggestions on how to set up the data drive please =) P.S. bonus if I can get an apache server document root folder working between the two OS's as well (permissions could become very complicated, so don't worry too much about that) P.P.S. Related question, but data viewing is one way: http://superuser.com/questions/84586/partition-scheme-and-size-for-dual-boot-windows-7-and-ubuntu-9-10-with-separate-p

    Read the article

  • Tying down a cloud by virtualizing everything and then locking VMs to real hardware as necessary

    - by tudor
    I'm looking for a cloud software solution that: Can run on both server and desktop machines; Virtualizes hardware and has the option of exposing each real machine to the cloud; Allows a VM to be "locked" to a set of real hardware capabilities and stay there until moved (e.g. a user's "real" desktop); Allows a VM to link to some types of devices elsewhere (e.g. USB/serial via ethernet); and Is geography-aware to control movement of VMs between real networks. I'm aware that this may be the holy grail of virtualization, and I've searched alot. Some solutions appear to meet some criteria but not others. Most cloud implementations appear to ignore real hardware, for example. I realise that this may be solved by using three different implementations in combination: A standard cloud server farm. A bare-metal network backup utility with PXEBoot. VNC and/or VDI. (VNC obviously would require the real hardware to be running.) This combination, however, has some serious drawbacks that I'd like to solve by treating it as one system. My explanation follows... I have a network of real servers and desktops in multiple locations. I've virtualized servers before using Virtualbox and that's worked quite well. I've even connected USB devices to VMs on servers. I would like to virtualize the desktops in all my offices to facilitate movement of desktops, remote access (e.g. VDI) and bare-metal backups. However, I know that there are problems with this. For example, some desktops have specific hardware (e.g. 3D graphics cards, USB devices, etc) that limit their mobility. Geographic constraints also limit movement in that VMs can be moved easily within offices, but transferring between offices is not always preferable. What I would like to find is a system that can virtualize everything from bare-metal easily by maintaining an abstraction layer on each client and server machine that exposes the hardware available and runs as a cloud. Then certain VMs would be "locked" to specific hardware (so that, e.g. the VM runs only on their own desktop.) This would be required for situations where speed is important (e.g. 3D graphics pass-through). In addition, abstracted low-speed devices (e.g. USB) could be piped from real hardware to a VM in the cloud. This is important since if a VM is taken down, another VM can connect to the real hardware for minimum downtime.

    Read the article

  • Trouble setting up PATH for Java on Debian

    - by milkmansrevenge
    I am trying to get Oracle Java 7 update 3 working correctly on Debian 6. I have downloaded and set up the files in /usr/java/jre1.7.0_03. I have also set the following two lines at the end of /etc/bash.bashrc: export JAVA_HOME=/usr/java/jre1.7.0_03 export PATH=$PATH:$JAVA_HOME/bin Logging in as other users and root is fine, Java can be found: chris@mc:~$ java -version java version "1.7.0_03" Java(TM) SE Runtime Environment (build 1.7.0_03-b04) Java HotSpot(TM) 64-Bit Server VM (build 22.1-b02, mixed mode) However there are two cases where Java cannot be found as detailed below. Note that both of these worked fine when I have previously installed OpenJDK Java 6 via aptitude, but I need Oracle Java 7 for various reasons. Most importantly, I cannot run commands as another user via su, despite the PATH showing that Java should be present. The user was created with adduser chris root@mc:~# su chris -c "echo $PATH" /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/java/jre1.7.0_03/bin:/bin root@mc:~# su chris -c "java -version" bash: java: command not found root@mc:~# su chris -c "/usr/java/jre1.7.0_03/bin/java -version" java version "1.7.0_03" ... How can it be in the PATH but not be found? Update 05/04/2012: explained by Daniel, to do with it being a non-interactive shell so files such as /etc/profile and /etc/bash.bashrc are not executed. Doing a full swap to that user and running Java works: root@mc:~# su chris chris@mc:/root$ java -version java version "1.7.0_03" ... I run a script on start up which exhibits similar but slightly different problems. The script is located in /etc/init.d/start-mystuff.sh and calls a jar: #!/bin/bash # /etc/init.d/start-mystuff.sh java -jar /opt/Mars.jar I can confirm that the script runs on start up and the exit code is 127, which indicates command not found. Inserting a line to print/save the PATH shows that it is: /sbin:/usr/sbin:/bin:/usr/bin This second problem isn't as important because I can just point directly to the Java executable in the script, but I am still curious! I have tried setting the full PATH and JAVA_HOME explicitly in /etc/environment which didn't help. I have also tried setting them in /etc/profile which doesn't seem to help either. I have tried logging in and out again after setting PATH in the various locations (duh!). Anyway, long post for what will probably have a simple one line solution :( Any help with this would be greatly appreciated, I have spent far too long trying to fix it by myself. Motivation The first problem may seem obscure but in my system I have users that are not allowed SSH access yet I still want to run processes as them. I have a ton of scripts operating in this way and don't want to have to change them all.

    Read the article

  • Using curl -s in *nix command line not working for some reason

    - by JM4
    I am trying to install composer (though to be honest I really have no idea how it fully works and documentation seems to be quite poor) on my MediaTemple DV machine. I am using their [instructions][1] Trying to install globally using: $ curl -s https://getcomposer.org/installer | php My command line (again using putty and logged into my server as root) thinks for a second, then sets up for next prompt. I run a simple ls -l to check for the file it should have downloaded with no luck. Any idea what could be causing the issue? I have tested and do in fact have curl installed. UPDATE 1 Based on the first answer, the verbose response is: > $ curl -vs https://getcomposer.org/installer | php > * About to connect() to getcomposer.org port 443 > * Trying 37.59.4.156... connected > * Connected to getcomposer.org (37.59.4.156) port 443 > * successfully set certificate verify locations: > * CAfile: /etc/pki/tls/certs/ca-bundle.crt CApath: none > * SSLv2, Client hello (1): SSLv3, TLS handshake, Server hello (2): SSLv3, TLS handshake, CERT (11): SSLv3, TLS handshake, Server key > exchange (12): SSLv3, TLS handshake, Server finished (14): SSLv3, TLS > handshake, Client key exchange (16): SSLv3, TLS change cipher, Client > hello (1): SSLv3, TLS handshake, Finished (20): SSLv3, TLS change > cipher, Client hello (1): SSLv3, TLS handshake, Finished (20): SSL > connection using DHE-RSA-AES256-SHA > * Server certificate: > * subject: /C=CH/CN=dl.packagist.org/[email protected] > * start date: 2012-07-07 23:25:35 GMT > * expire date: 2013-07-10 02:55:12 GMT > * SSL: certificate subject name 'dl.packagist.org' does not match target host name 'getcomposer.org' > * Closing connection #0 > * SSLv3, TLS alert, Client hello (1): > > > [1]: http://getcomposer.org/doc/00-intro.md

    Read the article

  • "Hostile" network in the company - please comment on a security setup

    - by TomTom
    I have a little specific problem here that I want (need) to solve in a satisfactory way. My company has multiple (IPv4) networks that are controlled by our router sitting in the middle. Typical smaller shop setup. There is now one additional network that has an IP Range OUTSIDE of our control, connected to the internet with another router OUTSIDE of our control. Call it a project network that is part of another companies network and combined via VPN they set up. This means: They control the router that is used for this network and They can reconfigure things so that they can access the machines in this network. The network is physically split on our end through some VLAN capable switches as it covers three locations. At one end there is the router the other company controls. I Need / want to give the machines used in this network access to my company network. In fact, it may be good to make them part of my active directory domain. The people working on those machines are part of my company. BUT - I need to do so without compromising the security of my company network from outside influence. Any sort of router integration using the externally controlled router is out by this idea So, my idea is this: We accept the IPv4 address space and network topology in this network is not under our control. We seek alternatives to integrate those machines into our company network. The 2 concepts I came up with are: Use some sort of VPN - have the machines log into VPN. Thanks to them using modern windows, this could be transparent DirectAccess. This essentially treats the other IP space not different than any restaurant network a laptop of the company goes in. Alternatively - establish IPv6 routing to this ethernet segment. But - and this is a trick - block all IPv6 packets in the switch before they hit the third party controlled router, so that even IF they turn on IPv6 on that thing (not used now, but they could do it) they would get not a single packet. The switch can nicely do that by pulling all IPv6 traffic coming to that port into a separate VLAN (based on ethernet protocol type). Anyone sees a problem with using he switch to isolate the outer from IPv6? Any security hole? It is sad we have to treat this network as hostile - would be a lot easier - but the support personnel there is of "known dubious quality" and the legal side is clear - we can not fulfill our obligations when we integrate them into our company while they are under a jurisdiction we don't have a say in.

    Read the article

  • Ideas for multiplatform encrypted java mobile storage system

    - by Fernando Miguélez
    Objective I am currently designing the API for a multiplatform storage system that would offer same interface and capabilities accross following supported mobile Java Platforms: J2ME. Minimum configuration/profile CLDC 1.1/MIDP 2.0 with support for some necessary JSRs (JSR-75 for file storage). Android. No minimum platform version decided yet, but rather likely could be API level 7. Blackberry. It would use the same base source of J2ME but taking advantage of some advaced capabilities of the platform. No minimum configuration decided yet (maybe 4.6 because of 64 KB limitation for RMS on 4.5). Basically the API would sport three kind of stores: Files. These would allow standard directory/file manipulation (read/write through streams, create, mkdir, etc.). Preferences. It is a special store that handles properties accessed through keys (Similar to plain old java properties file but supporting some improvements such as different value data types such as SharedPreferences on Android platform) Local Message Queues. This store would offer basic message queue functionality. Considerations Inspired on JSR-75, all types of stores would be accessed in an uniform way by means of an URL following RFC 1738 conventions, but with custom defined prefixes (i.e. "file://" for files, "prefs://" for preferences or "queue://" for message queues). The address would refer to a virtual location that would be mapped to a physical storage object by each mobile platform implementation. Only files would allow hierarchical storage (folders) and access to external extorage memory cards (by means of a unit name, the same way as in JSR-75, but that would not change regardless of underlying platform). The other types would only support flat storage. The system should also support a secure version of all basic types. The user would indicate it by prefixing "s" to the URL (i.e. "sfile://" instead of "file://"). The API would only require one PIN (introduced only once) to access any kind of secure object types. Implementation issues For the implementation of both plaintext and encrypted stores, I would use the functionality available on the underlying platforms: Files. These are available on all platforms (J2ME only with JSR-75, but it is mandatory for our needs). The abstract File to actual File mapping is straight except for addressing issues. RMS. This type of store available on J2ME (and Blackberry) platforms is convenient for Preferences and maybe Message Queues (though depending on performance or size requirements these could be implemented by means of normal files). SharedPreferences. This type of storage, only available on Android, would match Preferences needs. SQLite databases. This could be used for message queues on Android (and maybe Blackberry). When it comes to encryption some requirements should be met: To ease the implementation it will be carried out on read/write operations basis on streams (for files), RMS Records, SharedPreferences key-value pairs, SQLite database columns. Every underlying storage object should use the same encryption key. Handling of encrypted stores should be the same as the unencrypted counterpart. The only difference (from the user point of view) accessing an encrypted store would be the addressing. The user PIN provides access to any secure storage object, but the change of it would not require to decrypt/re-encrypt all the encrypted data. Cryptographic capabilities of underlying platform should be used whenever it is possible, so we would use: J2ME: SATSA-CRYPTO if it is available (not mandatory) or lightweight BoncyCastle cryptographic framework for J2ME. Blackberry: RIM Cryptographic API or BouncyCastle Android: JCE with integraced cryptographic provider (BouncyCastle?) Doubts Having reached this point I was struck by some doubts about what solution would be more convenient, taking into account the limitation of the plataforms. These are some of my doubts: Encryption Algorithm for data. Would AES-128 be strong and fast enough? What alternatives for such scenario would you suggest? Encryption Mode. I have read about the weakness of ECB encryption versus CBC, but in this case the first would have the advantage of random access to blocks, which is interesting for seek functionality on files. What type of encryption mode would you choose instead? Is stream encryption suitable for this case? Key generation. There could be one key generated for each storage object (file, RMS RecordStore, etc.) or just use one for all the objects of the same type. The first seems "safer", though it would require some extra space on device. In your opinion what would the trade-offs of each? Key storage. For this case using a standard JKS (or PKCS#12) KeyStore file could be suited to store encryption keys, but I could also define a smaller structure (encryption-transformation / key data / checksum) that could be attached to each storage store (i.e. using addition files with the same name and special extension for plain files or embedded inside other types of objects such as RMS Record Stores). What approach would you prefer? And when it comes to using a standard KeyStore with multiple-key generation (given this is your preference), would it be better to use a record-store per storage object or just a global KeyStore keeping all keys (i.e. using the URL identifier of abstract storage object as alias)? Master key. The use of a master key seems obvious. This key should be protected by user PIN (introduced only once) and would allow access to the rest of encryption keys (they would be encrypted by means of this master key). Changing the PIN would only require to reencrypt this key and not all the encrypted data. Where would you keep it taking into account that if this got lost all data would be no further accesible? What further considerations should I take into account? Platform cryptography support. Do SATSA-CRYPTO-enabled J2ME phones really take advantage of some dedicated hardware acceleration (or other advantage I have not foreseen) and would this approach be prefered (whenever possible) over just BouncyCastle implementation? For the same reason is RIM Cryptographic API worth the license cost over BouncyCastle? Any comments, critics, further considerations or different approaches are welcome.

    Read the article

  • Getting Classic ASP to work in .js files under IIS 7

    - by Abdullah Ahmed
    I am moving a clients classic asp webapp to a new IIS7 based server. The site contains some .js files which have javascript but also classic asp in <% % tags which contains a bunch of conditional statements designed to spit out pieces of javascript based on session state variables. Here's a brief example of what the file could be like.... var arrHOFFSET = -1; var arrLeft ="<"; var arrRight = ">"; <% If ((Session("dashInv") = "True") And ((Session("systemLevelStaff") = "4") Or (Session("systemLevelCompany") = "4"))) Then %> addMainItem("/MgmtTools/WelcomeInventory.asp?wherefrom=salesMan","",81,"center","","",0,0,"","","","",""); <% Else %> <% If (Session("dashInv") = "False") And ((Session("systemLevelStaff") = "4") Or (Session("systemLevelCompany") = "4")) Then %> <% Else %> addMainItem("/calendar/welcome.asp","",81,"center","","",0,0,"","","","",""); <% End If %> <% End If %> defineSubmenuProperties(135,"center","center",-3,0,"","","","","","",""); Currently this file (named custom.js for example) will start throwing js errors, because the server doesnt seem to recognize the asp code in it and therefore does not parse it. I know I need to somehow specify that a .js file should also be treated like an .asp file and run through parsing it. However I am not sure how to go about doing this. Here is what I've tried so far... Under the Server node in IIS under HANDLER MAPPINGS I created a new Script Map with the following settings. Request Path: *.js Executable: C:\Windows\System32\inetsrv\asp.dll Name: ASPClassicInJSFiles Mapping: Invoke Handler only if request is mapped to : File Verbs: All verbs Access: Script I also created a similar handler under the site node itself. Under MIME Types .js is defined as application/x-javascript None of these work. If I simply rename the file to have .asp extension then things work, however this app is poorly coded and has literally 100's of files with the .js files included in them under various names and locations, so rename, search and replace is the last option I have.

    Read the article

  • ISPconfig3 + CentOS 6.2 , confused on how to move forward after initial install?

    - by Damainman
    I installed ISPCONFIG3 on centos 6.2 using the great guide on howtoforge.com. Everything is up and running and I can access ISPCONFIG via a browser. However I am not sure how to move forward with the initial setup so I can setup the very first account and get my website live. Details: Only have 1 server, the centos+ispconfig is running on a virtual machine of XEN XCP. I setup the server name to be server1.mydomain.com. I only have 2 usable ips. I plan to use them as follows: xx.xx.xx.01 : For my website and the websites of all accounts I add. xx.xx.xx.02 : For ns1.mydomain.com and ns2.mydomain.com (Yea I know they should be different ips at different locations, but this is what I have to work with at the moment.... ) I registered the nameservers at my registrar with the .02 ip. I want to use bind and ISPconfig to run the DNS on my server itself and not via my registrar. Right now if I go to the .01 IP it shows the centos+apache successful install page. So to break it down basically I am not sure where to start when it comes to: (What to consider and what to do to setup the first domain on the server) Telling bind to use the name server domains with .02. Setting up my First website(which will be my main website) in ISPconfig so mydomain.com resolves properly to my server. Make it so when you go to the .01 IP, it either redirects or shows the contents of my main website. (If this can't be done, then any advice is appreciated) Making sure that when I add a new domain, it automatically puts in the proper information for the domain so it points to the right mail, database, dns, entry. If I overlooked a tutorial then please feel free to let me know, and any advice would be greatly appreciated. Some of the tutorials I found were not specific to doing everything on only one server with Centos+Apache+Bind. Right now all I did was install centos and install ISPconfig3. Trying to move forward correctly so I don't mess up everything I did by not knowing what to do. Thank you in advance!!

    Read the article

  • Mysql Servers for Attendance System

    - by foo
    I'm building an attendance system. There are about 20 places where people will check in and check out using Mifare 1K Card. It will use MySQL as the database. The system will display something like "#ID IN: 800AM" when the first time the user checks in and "#ID OUT: 400PM" when the user checks out. For this to work, all the databases need to be synchronized with each other all the times. For an example, if user A went to location #1 to check in but by the time he wants to return home, the server at location #1 went down, he needs to go to location #2 or the nearest server to check out. The server at location #2 should display '#ID OUT: 400PM" and not "#ID IN: 400PM" since he's already checked in. So, what should I use to ensure this idea will work? My main concern is with the network (other department manages it) which is very unpredictable. It just love to go down anytime it wants to. Update LOL, didn't realize my question is not clear, just noticed it when you guys pointed it out, sorry about that. My real question is, how can I configure my MySQL to be synchronized with each other (20 servers)? MySQL cluster ? (tried reading about it, but I'm not sure if it's the right thing to do) My current setup (first phase): Local database for each server OS: Slackware A main server that keeps track which staff is at which server A web based front end for the user to see their history (which connects to the server based on their records) Main Pros No worries about network problems since it is a local database Main Cons A user can only check in and out at the same server. Databases/Servers are not connected with each others. Have to add the user to each server if the users want to check in at different locations. Which means, if he wants to go to location A, he must be checked out from location A first and then check in at location B. The server at location B didn't know that the user has checked in before at A. By the way, I've already centralized my NTP to a local server. About the network, let's just say, I don't have the authority to make changes so that the network will be better. The network won't effect all 20 servers at once, usually, just a few of them for several times a week. If there are anything else you would like me to answer, please just ask.

    Read the article

  • Automating silent software deployments on Solaris 10

    - by datSilencer
    Hello everyone. Essentially, the question I'd like to ask is related to the automation of software package deployments on Solaris 10. Specifically, I have a set of software components in tar files that run as daemon processes after being extracted and configured in the host environment. Pretty much like any server side software package out there, I need to ensure that a list of prerequisites are met before extracting and running the software. For example: Checking that certain users exists, and they are associated with one or many user groups. If not, then create them and their group associations. Checking that target application folders exist and if not, then create them with preconfigured path values defined when the package was assembled. Checking that such folders have the appropriate access control level and ownership for a certain user. If not, then set them. Checking that a set of environment variables are defined in /etc/profile, pointed to predefined path locations, added to the general $PATH environment variable, and finally exported into the user's environment. Other files include /etc/services and /etc/system. Obviously, doing this for many boxes (the goal in question) by hand can be slow and error prone. I believe a better alternative is to somehow automate this process. So far I have thought about the following options, and discarded them for one reason or another. 1) Traditional shell scripts. I've only troubleshooted these before, and I don't really have much experience with them. These would be my last resort. 2) Python scripts using the pexpect library for analyzing system command output. This was my initial choice since the target Solaris environments have it installed. However, I want to make sure that I'm not reinveting the wheel again :P. 3) Ant or Gradle scripts. They may be an option since the boxes also have java 1.5 enabled, and the fileset abstractions can be very useful. However, they may fall short when dealing with user and folder permissions checking/setting. It seems obvious to me that I'm not the first person in this situation, but I don't seem to find a utility framework geared towards this purpose. Please let me know if there's a better way to accomplish this. I thank you for your time and help.

    Read the article

  • How to configure DD-WRT routing table when creating an isolated network segment for PCI C VT compliance

    - by tetranz
    I'm the volunteer support and system admin person at a small private school. We need to setup a PCI compliant Windows PC as a virtual terminal for credit card processing. I've read questionnaire SAQ C-VT and, to quote, this computer needs to be accessed: "via a computer that is isolated in a single location, and is not connected to other locations or systems within your environment (this can be achieved via a firewall or network segmentation to isolate the computer from other systems)" Our setup is as follows: DSL modem from ISP is setup to be a "transparent pipe" with no extra services. That goes into the WAN port of Linksys WRT54-GL running a DD-WRT. The LAN is 192.168.1.x. There are a couple of other WRT54-GL / DD-WRT devices. One is used as a wireless AP and another is a client bridge. To isolate the VT (virtual terminal) machine, I have another DD-WRT device. Its WAN is connected to a port on the 192.168.1.x LAN. The virtual terminal machine is connected to its LAN which is at 192.168.10.x. The SPI Firewall etc is turned on. It's basically the default DD-WRT gateway setup where the "ISP" is our own LAN. That's working. All incoming traffic to the VT machine is blocked, including from our own LAN. The VT can access the internet BUT, and here's the problem, it can also ping any of the computers on the 192.168.1.x LAN. I think I need to stop that. I'm guessing that I could do something with the Static Routing table in the VT machine's DD-WRT device. I need to route anything going to 192.168.1.x other than the gateway which is 192.168.1.1 to 0.0.0.0 or something like that. That's where I'm stuck at the end of my knowledge. Or ... do I need to get yet another DD-WRT so the network is "balanced". Maybe I need to have the internet from the DSL going into a DD-WRT which has only two devices on its LAN i.e., two other DD-WRTs, one for the main LAN and one for the VT. I think that would do but I'd like to avoid the extra cost and complexity if I don't need it. Thanks

    Read the article

  • Is there a Distributed SAN/Storage System out there?

    - by Joel Coel
    Like many other places, we ask our users not to save files to their local machines. Instead, we encourage that they be put on a file server so that others (with appropriate permissions) can use them and that the files are backed up properly. The result of this is that most users have large hard drives that are sitting mainly empty. It's 2010 now. Surely there is a system out there that lets you turn that empty space into a virtual SAN or document library? What I envision is a client program that is pushed out to users' PCs that coordinates with a central server. The server looks to users just like a normal file server, but instead of keeping entire file contents it merely keeps a record of where those files can be found among various user PCs. It then coordinates with the right clients to serve up file requests. The client software would be able to respond to such requests directly, as well as be smart enough to cache recent files locally. For redundancy the server could make sure files are copied to multiple PCs, perhaps allowing you to define groups in different locations so that an instance of the entire repository lives in each group to protect against a disaster in one building taking down everything else. Obviously you wouldn't point your database server here, but for simpler things I see several advantages: Files can often be transferred from a nearer machine. Disk space grows automatically as your company does. Should ultimately be cheaper, as you don't need to keep a separate set of disks I can see a few downsides as well: Occasional degradation of user pc performance, if the machine has to serve or accept a large file transfer during a busy period. Writes have to be propogated around the network several times (though I suspect this isn't really much of a problem, as reading happens in most places more than writing) Still need a way to send a complete copy of the data offsite occasionally, and this would make it very hard to do differentials Think of this like a cloud storage system that lives entirely within your corporate LAN and makes use of your existing user equipment. Our old main file server is due for retirement in about 2 years, and I'm looking into replacing it with a small SAN. I'm thinking something like this would be a better fit. As a school, we have a couple computer labs I can leave running that would be perfect for adding a little extra redundancy to the system. Unfortunately, the closest thing I can find is Dienst, and it's just a paper that dates back to 1994. Am I just using the wrong buzzwords in my searches, or does this really not exist? If not, is there a big downside that I'm missing?

    Read the article

  • Weird nfs performance: 1 thread better than 8, 8 better than 2!

    - by Joe
    I'm trying to determine the cause of poor nfs performance between two Xen Virtual Machines (client & server) running on the same host. Specifically, the speed at which I can sequentially read a 1GB file on the client is much lower than what would be expected based on the measured network connection speed between the two VMs and the measured speed of reading the file directly on the server. The VMs are running Ubuntu 9.04 and the server is using the nfs-kernel-server package. According to various NFS tuning resources, changing the number of nfsd threads (in my case kernel threads) can affect performance. Usually this advice is framed in terms of increasing the number from the default of 8 on heavily-used servers. What I find in my current configuration: RPCNFSDCOUNT=8: (default): 13.5-30 seconds to cat a 1GB file on the client so 35-80MB/sec RPCNFSDCOUNT=16: 18s to cat the file 60MB/s RPCNFSDCOUNT=1: 8-9 seconds to cat the file (!!?!) 125MB/s RPCNFSDCOUNT=2: 87s to cat the file 12MB/s I should mention that the file I'm exporting is on a RevoDrive SSD mounted on the server using Xen's PCI-passthrough; on the server I can cat the file in under seconds ( 250MB/s). I am dropping caches on the client before each test. I don't really want to leave the server configured with just one thread as I'm guessing that won't work so well when there are multiple clients, but I might be misunderstanding how that works. I have repeated the tests a few times (changing the server config in between) and the results are fairly consistent. So my question is: why is the best performance with 1 thread? A few other things I have tried changing, to little or no effect: increasing the values of /proc/sys/net/ipv4/ipfrag_low_thresh and /proc/sys/net/ipv4/ipfrag_high_thresh to 512K, 1M from the default 192K,256K increasing the value of /proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_max to 1M from the default of 128K mounting with client options rsize=32768, wsize=32768 From the output of sar -d I understand that the actual read sizes going to the underlying device are rather small (<100 bytes) but this doesn't cause a problem when reading the file locally on the client. The RevoDrive actually exposes two "SATA" devices /dev/sda and /dev/sdb, then dmraid picks up a fakeRAID-0 striped across them which I have mounted to /mnt/ssd and then bind-mounted to /export/ssd. I've done local tests on my file using both locations and see the good performance mentioned above. If answers/comments ask for more details I will add them.

    Read the article

  • Apache certificates for some urls not working

    - by Vegaasen
    We are having a rather strange problem with a Apache-installation. Here is a short summary: Currently I'm setting up Apache with https, and server-certificates. This is fairly easy and works straight out of the box - as expected. This is the configuration for this setup: Listen 443 SSLEngine on SSLCertificateFile "/progs/apache/ssl/example-site.no.pem" SSLCertificateKeyFile "/progs/apache/ssl/example-site.no.key" SSLCACertificateFile "/progs/apache/ssl/ca/example_root.pem" SSLCADNRequestFile "/progs/apache/ssl/ca/example_intermediate.pem" SSLVerifyClient none SSLVerifyDepth 3 SSLOptions +StdEnvVars +ExportCertData RequestHeader set ssl-ClientCert-Subject-CN "%{SSL_CLIENT_S_DN}s" RewriteEngine On ProxyPreserveHost On ProxyRequests On SSLProxyEngine On ... <LocationMatch /secureStuff/$> SSLVerifyClient require Order deny,allow Allow from All </LocationMatch> ... <Proxy balancer://exBalancer> Header add Set-Cookie "EX_ROUTE=EB.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED BalancerMember http://10.0.0.1:7200 route=ee1 retry=300 flushpackets=off keepalive=on BalancerMember http://10.0.0.2:7200 route=ee2 retry=300 flushpackets=off keepalive=on status=+H ProxySet stickysession=EX_ROUTE scolonpathdelim=Off timeout=10 nofailover=off failonstatus=505 maxattempts=1 lbmethod=bybusyness Order deny,allow Allow from all </Proxy> RewriteCond %{REQUEST_URI} !^/index.html [NC] RewriteRule ^/(.*)$ balancer://exBalancer/$1 [P,NC] ProxyPassReverse / balancer://exBalancer/ Header edit Set-Cookie "(.*)" "$1;HttpsOnly" ... So - everything works fine and as expected for all of the pages that are not a part of the LocationMatch-directive. When requesting something that matches the LocationMatch-directive, I'm asked for a certificate (hence the SSLVerifyClient required attribute) - and getting all the correct certificates in my browser that is based on the root/intermediate chain. After choosing a certificate and clicking "OK", this is what pops up in the apache logs: [ssl:info] [pid 9530:tid 25] [client :43357] AH01998: Connection closed to child 86 with abortive shutdown ( [Thu Oct 11 09:27:36.221876 2012] [ssl:debug] [pid 9530:tid 25] ssl_engine_io.c(1171): (70014)End of file found: [client 10.235.128.55:45846] AH02007: SSL handshake interrupted by system [Hint: Stop button pressed in browser?!] And this just spams the logs. What is happening here? I can see this configuration working on my local machine, but not on one of our servers. There is no configration differences between the servers, only minor application-wise-changes. I've tried the following: 1) Removing CA-certificate-checking (works) 2) Adding required CA-certificate for the whole site (works) 3) Adding "SSLVerifyClient optional" does not work 4) ++ Server/Application Information Local: -OpenSSL v.1.0.1x -Apache 2.4.3 -Ubuntu -mpm: event -every configuration should be turned on (failing) server: -OpenSSL 0.9.8e -Apache 2.4.2 -SunOS -mpm: worker -every configuration should be turned on Please let me know if more information is needed, I'll provide it instantly. Brief sum-up: -Running apache 2.4 -Server certificates works just fine -Client certificates for some /Locations does not work, fails with errors PS: Could it be related with the OpenSSL version and the "Renegotiation" stuff related to TLS/SSLv3?

    Read the article

  • Numpy zero rank array indexing/broadcasting

    - by Lemming
    I'm trying to write a function that supports broadcasting and is fast at the same time. However, numpy's zero-rank arrays are causing trouble as usual. I couldn't find anything useful on google, or by searching here. So, I'm asking you. How should I implement broadcasting efficiently and handle zero-rank arrays at the same time? This whole post became larger than anticipated, sorry. Details: To clarify what I'm talking about I'll give a simple example: Say I want to implement a Heaviside step-function. I.e. a function that acts on the real axis, which is 0 on the negative side, 1 on the positive side, and from case to case either 0, 0.5, or 1 at the point 0. Implementation Masking The most efficient way I found so far is the following. It uses boolean arrays as masks to assign the correct values to the corresponding slots in the output vector. from numpy import * def step_mask(x, limit=+1): """Heaviside step-function. y = 0 if x < 0 y = 1 if x > 0 See below for x == 0. Arguments: x Evaluate the function at these points. limit Which limit at x == 0? limit > 0: y = 1 limit == 0: y = 0.5 limit < 0: y = 0 Return: The values corresponding to x. """ b = broadcast(x, limit) out = zeros(b.shape) out[x>0] = 1 mask = (limit > 0) & (x == 0) out[mask] = 1 mask = (limit == 0) & (x == 0) out[mask] = 0.5 mask = (limit < 0) & (x == 0) out[mask] = 0 return out List Comprehension The following-the-numpy-docs way is to use a list comprehension on the flat iterator of the broadcast object. However, list comprehensions become absolutely unreadable for such complicated functions. def step_comprehension(x, limit=+1): b = broadcast(x, limit) out = empty(b.shape) out.flat = [ ( 1 if x_ > 0 else ( 0 if x_ < 0 else ( 1 if l_ > 0 else ( 0.5 if l_ ==0 else ( 0 ))))) for x_, l_ in b ] return out For Loop And finally, the most naive way is a for loop. It's probably the most readable option. However, Python for-loops are anything but fast. And hence, a really bad idea in numerics. def step_for(x, limit=+1): b = broadcast(x, limit) out = empty(b.shape) for i, (x_, l_) in enumerate(b): if x_ > 0: out[i] = 1 elif x_ < 0: out[i] = 0 elif l_ > 0: out[i] = 1 elif l_ < 0: out[i] = 0 else: out[i] = 0.5 return out Test First of all a brief test to see if the output is correct. >>> x = array([-1, -0.1, 0, 0.1, 1]) >>> step_mask(x, +1) array([ 0., 0., 1., 1., 1.]) >>> step_mask(x, 0) array([ 0. , 0. , 0.5, 1. , 1. ]) >>> step_mask(x, -1) array([ 0., 0., 0., 1., 1.]) It is correct, and the other two functions give the same output. Performance How about efficiency? These are the timings: In [45]: xl = linspace(-2, 2, 500001) In [46]: %timeit step_mask(xl) 10 loops, best of 3: 19.5 ms per loop In [47]: %timeit step_comprehension(xl) 1 loops, best of 3: 1.17 s per loop In [48]: %timeit step_for(xl) 1 loops, best of 3: 1.15 s per loop The masked version performs best as expected. However, I'm surprised that the comprehension is on the same level as the for loop. Zero Rank Arrays But, 0-rank arrays pose a problem. Sometimes you want to use a function scalar input. And preferably not have to worry about wrapping all scalars in at least 1-D arrays. >>> step_mask(1) Traceback (most recent call last): File "<ipython-input-50-91c06aa4487b>", line 1, in <module> step_mask(1) File "script.py", line 22, in step_mask out[x>0] = 1 IndexError: 0-d arrays can't be indexed. >>> step_for(1) Traceback (most recent call last): File "<ipython-input-51-4e0de4fcb197>", line 1, in <module> step_for(1) File "script.py", line 55, in step_for out[i] = 1 IndexError: 0-d arrays can't be indexed. >>> step_comprehension(1) array(1.0) Only the list comprehension can handle 0-rank arrays. The other two versions would need special case handling for 0-rank arrays. Numpy gets a bit messy when you want to use the same code for arrays and scalars. However, I really like to have functions that work on as arbitrary input as possible. Who knows which parameters I'll want to iterate over at some point. Question: What is the best way to implement a function as the one above? Is there a way to avoid if scalar then like special cases? I'm not looking for a built-in Heaviside. It's just a simplified example. In my code the above pattern appears in many places to make parameter iteration as simple as possible without littering the client code with for loops or comprehensions. Furthermore, I'm aware of Cython, or weave & Co., or implementation directly in C. However, the performance of the masked version above is sufficient for the moment. And for the moment I would like to keep things as simple as possible.

    Read the article

  • How to loop through all illustrator files in a folder (CS6)

    - by Julian
    I have written some JavaScript to save .ai files to two separate locations with different resolutions, one of them being cropped to a reduced size art board. (Courtesy of John Otterud / Articmill for the main part). There are other variables in the script that I am not using at present but I want to leave the functionality there for a later date/additional layers to export/other resolutions etc. I can't get it to loop through all files in a folder. I cannot find the script that works - or insert it at the right place. I can get as far a selecting the folder and I suppose creating an array but after that what next? This is the create array part of the script - // JavaScript Document //Set up vairaibles var destDoc, sourceDoc, sourceFolder, newLayer; // Select the source folder. sourceFolder = Folder.selectDialog('Select the folder with Illustrator files that you want to mere into one', '~'); destDoc = app.documents.add(); // If a valid folder is selected if (sourceFolder != null) { files = new Array(); // Get all files matching the pattern files = sourceFolder.getFiles(); I have inserted this at the beginning of the main script (probably where I am going wrong because I can select the folder but then nothing more) #target illustrator var docRef = app.activeDocument; with (docRef) { if (layers[i].name = 'HEADER') { layers[i].name = '#'+ activeDocument.name; save() } } // *** Export Layers as PNG files (in multiple resolutions) *** var subFolderName = "For_PLMA"; var subFolderTwoName = "For_VLP"; var saveInMultipleResolutions = true; // ... // Note: only use one character! var exportLayersStartingWith = "%"; var exportLayersWithArtboardClippingStartingWith = "#"; // ... var normalResolutionFileAppend = "_VLP"; var highResolutionFileAppend = "_PLMA"; // ... var normalResolutionScale = 100; var highResolutionScale = 200; var veryhighResolutionScale = 300; // *** Start of script *** var doc = app.activeDocument; // Make sure we have saved the document if (doc.path != "") { Then the rest of the export script runs on from there.

    Read the article

  • 2 servers, high availability and faster response

    - by user17886
    I recently bought a second webserver because I worry about hardware failure of my old server. Now that I have that second server I wish to do a little more then just have one server standby and replicate all day. As long as it's there I might as well get some advantage our of it ! I have a website powered by ubuntu 12.04, nginx, php-fpm, apc, mysql (5.5) and couchdb. Im currently testing configurations where i can achieve failover AND make good use of the extra harware for faster responses / distributed load. The setup I am testing nowinvolves heartbeat for ip failover and two identical servers. Of the two servers only one has a public ip adress. If one server crashes the other server takes over the public ip adress. On an incoming request nginx forwards the request tot php-fpm to either server a of server b (50/50 if both servers are alive). Once the request has been send to php-fpm both servers look at localhost for the mysql server. I use master-master mysql replication for this. The file system is synced with lsyncd. This works pretty well but Im reading it's discouraged by the (mysql) community. Another option I could think of is to use one server as a mysql master and one server as a web/php server. The servers would still sync their filesystem, would still run the same duplicate software (nginx,mysql) but master slave mysql replication could be used. As long as bother servers are alive I could just prefer nginx to listen to ip a and mysql to ip b. If one server is down, the other server could take over the task of the other server, simply by ip switching. But im completely new at this so I would greatly value your expert advice. Is either of the two setups any good ? If you have any thoughts on this please let me know ! PS, virtualisation, hosting on different locations or active/passive setups are not solutions im looking for. I find virtual server either too slow or too expensive. I already have a passive failover on another location. But in case of a crash I found the site was still unreachable for too long due to dns caching.

    Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >