Search Results

Search found 10862 results on 435 pages for 'flash develop'.

Page 211/435 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

• QLogic QLE8152 won't link up with a fiber loop

  - by Mike Pennington

  I have a Dell R710 running Debian Linux 6.0 (Squeeze). I installed a QLogic QLE8152 CNA in the PCI-E riser today and I have been trying to get the CNA's ethernet layer to come up after I put a fiber loop on it; I also scoped it with a light meter, and the SFP+ transceiver is getting the correct amount of light. The whole time I have been working on this problem, the lights on the CNA are blinking green at a rate of about 1 flash every 3 seconds. When I plug the fiber into a Juniper EX4500 10GE in a rack next to it, the Juniper's link stays down as well. I have to confess that this is my first wrangling with a CNA, so perhaps I'm doing something fundamentally wrong, but here is what I have found so far... First the basics... [mpenning@Finger ~]$ uname -a Linux Finger 2.6.32-5-amd64 #1 SMP Mon Oct 3 03:59:20 UTC 2011 x86_64 GNU/Linux [mpenning@Finger ~]$ cat /etc/issue Debian GNU/Linux 6.0 \n \l [mpenning@Finger ~]$ lspci -v shows that the card is properly installed (physically) 04:00.0 Ethernet controller: QLogic Corp. 10GbE Converged Network Adapter (TCP/IP Networking) (rev 02) Subsystem: QLogic Corp. Device 017e Flags: bus master, fast devsel, latency 0, IRQ 34 I/O ports at e000 [size=256] Memory at df8f0000 (64-bit, non-prefetchable) [size=16K] Memory at df900000 (64-bit, non-prefetchable) [size=1M] Expansion ROM at df800000 [disabled] [size=256K] Capabilities: [44] Power Management version 3 Capabilities: [4c] Express Endpoint, MSI 00 Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [98] Vital Product Data Capabilities: [a0] MSI-X: Enable+ Count=8 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [138] Device Serial Number 00-c0-dd-ff-fe-1c-53-b4 Capabilities: [144] Power Budgeting <?> Kernel driver in use: qlge The output from ethtool shows that eth4 is the QLE8152... [mpenning@Finger ~]$ sudo ethtool eth4 Settings for eth4: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: on Current message level: 0x000060f7 (24823) Link detected: no [mpenning@Finger ~]$ sudo ethtool -i eth4 driver: qlge version: v1.00.00-b3 firmware-version: v1.35.11 bus-info: 0000:04:00.0 [mpenning@Finger ~]$ Finally, I tried modprobe -r qlge; modprobe -r qla2xxx and then modprobe qla2xxx; modprobe qlge to kick the system again... I don't see a smoking gun in /var/log/messages... Nov 17 19:46:21 finger kernel: [ 6212.298275] qlge 0000:04:00.1: PCI INT B disabled Nov 17 19:46:22 finger kernel: [ 6213.779974] qlge 0000:04:00.0: PCI INT A disabled Nov 17 19:46:33 finger kernel: [ 6224.554074] qla2xxx 0000:04:00.3: PCI INT D disabled Nov 17 19:46:33 finger kernel: [ 6224.555322] qla2xxx 0000:04:00.2: PCI INT C disabled Nov 17 19:46:54 finger kernel: [ 6245.625854] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:54 finger kernel: [ 6245.625888] qla2xxx 0000:04:00.2: PCI INT C -> GSI 35 (level, low) -> IRQ 35 Nov 17 19:46:54 finger kernel: [ 6245.626837] qla2xxx 0000:04:00.2: MSI-X vector count: 7 Nov 17 19:46:54 finger kernel: [ 6245.626841] qla2xxx 0000:04:00.2: Found an ISP8001, irq 35, iobase 0xffffc90012664000 Nov 17 19:46:54 finger kernel: [ 6245.627113] qla2xxx 0000:04:00.2: Configuring PCI space... Nov 17 19:46:54 finger kernel: [ 6245.639429] qla2xxx 0000:04:00.2: Configure NVRAM parameters... Nov 17 19:46:54 finger kernel: [ 6245.642597] qla2xxx 0000:04:00.2: Verifying loaded RISC code... Nov 17 19:46:54 finger kernel: [ 6245.642708] qla2xxx 0000:04:00.2: FW: Loading from flash (a0000)... Nov 17 19:46:55 finger kernel: [ 6246.273340] qla2xxx 0000:04:00.2: Allocated (64 KB) for FCE... Nov 17 19:46:55 finger kernel: [ 6246.273401] qla2xxx 0000:04:00.2: Allocated (64 KB) for EFT... Nov 17 19:46:55 finger kernel: [ 6246.273486] qla2xxx 0000:04:00.2: Allocated (1350 KB) for firmware dump... Nov 17 19:46:55 finger kernel: [ 6246.273856] scsi9 : qla2xxx Nov 17 19:46:55 finger kernel: [ 6246.274631] qla2xxx 0000:04:00.2: Nov 17 19:46:55 finger kernel: [ 6246.274633] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:55 finger kernel: [ 6246.274634] QLogic QLE8152 - QLogic PCI-Express Dual Channel 10GbE CNA Nov 17 19:46:55 finger kernel: [ 6246.274636] ISP8001: PCIe (5.0GT/s x4) @ 0000:04:00.2 hdma+, host#=9, fw=5.01.04 (8d4) Nov 17 19:46:55 finger kernel: [ 6246.274666] qla2xxx 0000:04:00.3: PCI INT D -> GSI 37 (level, low) -> IRQ 37 Nov 17 19:46:55 finger kernel: [ 6246.274748] qla2xxx 0000:04:00.3: MSI-X vector count: 7 Nov 17 19:46:55 finger kernel: [ 6246.274751] qla2xxx 0000:04:00.3: Found an ISP8001, irq 37, iobase 0xffffc900125c4000 Nov 17 19:46:55 finger kernel: [ 6246.275098] qla2xxx 0000:04:00.3: Configuring PCI space... Nov 17 19:46:55 finger kernel: [ 6246.287329] qla2xxx 0000:04:00.3: Configure NVRAM parameters... Nov 17 19:46:55 finger kernel: [ 6246.290624] qla2xxx 0000:04:00.3: Verifying loaded RISC code... Nov 17 19:46:55 finger kernel: [ 6246.290736] qla2xxx 0000:04:00.3: FW: Loading from flash (a0000)... Nov 17 19:46:55 finger kernel: [ 6246.920204] qla2xxx 0000:04:00.3: Allocated (64 KB) for FCE... Nov 17 19:46:55 finger kernel: [ 6246.920264] qla2xxx 0000:04:00.3: Allocated (64 KB) for EFT... Nov 17 19:46:55 finger kernel: [ 6246.920345] qla2xxx 0000:04:00.3: Allocated (1350 KB) for firmware dump... Nov 17 19:46:55 finger kernel: [ 6246.920749] scsi10 : qla2xxx Nov 17 19:46:55 finger kernel: [ 6246.921715] qla2xxx 0000:04:00.3: Nov 17 19:46:55 finger kernel: [ 6246.921716] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:55 finger kernel: [ 6246.921717] QLogic QLE8152 - QLogic PCI-Express Dual Channel 10GbE CNA Nov 17 19:46:55 finger kernel: [ 6246.921719] ISP8001: PCIe (5.0GT/s x4) @ 0000:04:00.3 hdma+, host#=10, fw=5.01.04 (8d4) Nov 17 19:46:58 finger kernel: [ 6249.519911] qlge 0000:04:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 Nov 17 19:46:58 finger kernel: [ 6249.533970] qlge 0000:04:00.0: QLogic 10 Gigabit PCI-E Ethernet Driver Nov 17 19:46:58 finger kernel: [ 6249.533975] qlge 0000:04:00.0: Driver name: qlge, Version: v1.00.00-b3. Nov 17 19:46:58 finger kernel: [ 6249.534856] qlge 0000:04:00.0: ql_display_dev_info: Function #0, Port 0, NIC Roll 0, NIC Rev = 1, XG Roll = 0, XG Rev = 1. Nov 17 19:46:58 finger kernel: [ 6249.534860] qlge 0000:04:00.0: ql_display_dev_info: MAC address 00:c0:dd:1c:53:b4 Nov 17 19:46:58 finger kernel: [ 6249.534888] qlge 0000:04:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 Nov 17 19:46:58 finger kernel: [ 6249.549109] qlge 0000:04:00.1: ql_display_dev_info: Function #1, Port 1, NIC Roll 0, NIC Rev = 1, XG Roll = 0, XG Rev = 1. Nov 17 19:46:58 finger kernel: [ 6249.549112] qlge 0000:04:00.1: ql_display_dev_info: MAC address 00:c0:dd:1c:53:b6 Any assistance getting a link up on this is greatly appreciated...

  Read the article

• Windows server 2008 R2 + VMWare Workstation 7.0

  - by G0RY

  Hi, im trying to install Windows 2008 R2 on VMWare, and I got this error: A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or usb flash drive, please insert it now. I was trying to install it from ISO, daemon and from DVD drive, but always get this error.

  Read the article

• whitelist- blacklist implementation using amavis

  - by hitesh-solanki

  Hiiiii... I want to develop mailserver. I want to blocked specific sender's email using amavis. so what can i do? can i edit /usr/sbin/amavisd file or any other way.....?

  Read the article

• Install windows xp from USB using the iso image

  - by buyrum

  I've got the windows xp ISO image on my computer and i want to install it on a computer without cdrom. The only way to do it is using usb flash drive. I don't know how to do it - i need to burn the iso to usb, make the usb bootable, install windows xp from the usb onto the hardrive (the usb should just replace the standard windows install disc). How to do it ?

  Read the article

• Install windows xp from USB using the iso image

  - by buyrum

  I've got the windows xp ISO image on my computer and i want to install it on a computer without cdrom. The only way to do it is using usb flash drive. I don't know how to do it - i need to burn the iso to usb, make the usb bootable, install windows xp from the usb onto the hardrive (the usb should just replace the standard windows install disc). How to do it ?

  Read the article

• Copy File Contiguously to Disk from OSX/Unix/Linux to FAT32 FS?

  - by alharaka

  So the Sysinternals guys have that cool contig.exe utility that allows me ensure a file is contiguous. I need to copy overs ISO files to a FAT32 USB flash key. Grub4DOS requires the files be continuous, but I do not have Windows access at the moment. Is there a way to copy a file so it is contiguous on the target drive, or a tool like the aforementioned that will make an existing file contiguous. Again, I need it on FAT32, and there lies the rub.

  Read the article

• Drivers not installing and drives not being recognized

  - by jab818

  Dell optiplex 755 running win7-32 Two problems, not sure if they're related 1: Two drivers are missing when viewing device manager, PCI serial port and PCI Simple Communications Controller, I've searched dell's site, and the internet as a whole and have been wholly unable to find the drivers. 2: I'm unable to connect any external hard drives, but any flash drives plugged in will be recognized and accessible by the computer without issue. Any help would be appreciated.

  Read the article

• Drop compulsive http requests same url, same IP in Apache tomcat

  - by Rodrigo Asensio

  I want to drop http request done to the same url from the same ip inside the same second. That means, its a guy violently pressing F5 or a bot screwing up my server. Do anyone knows any lib for java to avoid this or should I develop a Map in memory checking who is killing the server ?

  Read the article

• How do I access a hard drive from a computer where windows is deleted?

  - by Intredasting

  Here is the current situation: My cousin deleted Windows from his hard drive (yeah, don't ask...). His hard drive still has about 200 GB of files on it that he may want to recover before we format the hard drive and reinstall Windows 7 to it. Is there a way I can create a bootable CD from some utility that will allow me to access the files on the hard drive, and copy it to a flash drive? What's the best utility for that?

  Read the article

• Windows 7 NNTP Server

  - by int0x90

  I am doing some development that requires some interaction with an NNTP server, however I don't want to develop against a live server for obvious reasons and am trying to get a local NNTP server setup for testing, but for the life of me I can't find any guides on setting one up in (preferably) Windows 7. Can anyone shed some light? I've found that in IIS 6 you were able to setup an NNTP server, but I unfortunately do not have a 2003 VM at my disposal, I'm stuck with either XP or Windows 7. Thanks

  Read the article

• Which laptop should I get for web design / development

  - by Mikey1010

  Hi, I require to buy a laptop, but I'm clueless really-need a laptop that will run the usual software for web work-photoshop,fireworks,dreamweaver,flash etc but also run php and .net, maybe most programs open at same time. My budget is between £400-£600 ($600-$900) please provide links if possible! Any help is very much appreciated.

  Read the article

• Which laptop should I get for web design / development?

  - by Mikey1010

  Hi, I require to buy a laptop, but I'm clueless really-need a laptop that will run the usual software for web work-photoshop,fireworks,dreamweaver,flash etc but also run php and .net, maybe most programs open at same time. My budget is between £400-£600 ($600-$900) please provide links if possible! Any help is very much appreciated.

  Read the article

• Which laptop should I get for web design / development

  - by Mikey1010

  Hi, I require to buy a laptop, but I'm clueless really-need a laptop that will run the usual software for web work-photoshop,fireworks,dreamweaver,flash etc but also run php and .net, maybe most programs open at same time. My budget is between £400-£600 ($600-$900) please provide links if possible! Any help is very much appreciated.

  Read the article

• How much real memory does an iPad have?

  - by Tony Lambert

  The iPad comes with Gigabytes of flash memory - used as a large disk, but how much actual real memory does it have. The iPhone 3gs has 256 MB. Presumably the iPad has more? I am writing an Application and this has a impact on how I choose to write it.

  Read the article

• How to create .iso from Snow Leopard retail DVD

  - by user10580

  I have a legal copy of Snow Leopard on DVD (retail) which I am attempting to use to create a bootable flash drive. The software I have been directed to use requests a .iso file (as I am familiar with from other os installs), but when inserting the DVD into either Windows 7 or Ubuntu 9.10 the disk is recognized only as a "Windows Support" DVD, with materials to "support Apple hardware with Windows." This is eventually intended for a hackintosh attempt on an ASUS EEEPC 1000HE netbook. This is an install disk. Thanks

  Read the article

• software for ubuntu that can emulate cd burning

  - by user23950

  I don't want to waste my blank dvd's for a burning software that does not work. Do you know of any software that can emulate cd burning? Maybe emulate it by burning the data into a flash drive which is seen by the software as a cd or dvd. Is it possible?

  Read the article

• Where can I get some real life CDR/SMDR/AMA logs from asterisk or ther IP based switch?

  - by bogdan

  In order to develop some generic call accounting software I need some sample logs from IP based PBX. Where can I get some? - I need more than 100 records, preferably using both SIP and telephony trunks.

  Read the article

• Ubuntu Netbook Remix on USB?

  - by user38008

  I'm going to install Netbook remix on my 4gig flash drive. Will 4 gigs be enough? How much space will be left for data? Thanks!

  Read the article

• Which is faster, copying everything at once or one thing at a time?

  - by fredley

  I am transferring a bunch (20+) of large (1GB+) files to my external flash drive over USB 2.0. Is it quicker to just sling them all over at once (as in one at a time but not waiting for the previous transfer to finish) so that there are multiple transfers going on, or transfer one, wait for it to finish, transfer the next. The files are coming from a variety of locations so I can't do one single big transfer. Are there any other advantages to one way or the other that are worth considering?

  Read the article

• How do i remove the green line in Adobe Media Encoder

  - by Roy Rico

  I'm trying to resize a flash video (F4V) and in the media encoder, there is a green line along the left edge of the screen. This greenline is visisble in the Adobe Media Encoder, but not in the source video. This greenline is then visible on the output video. How do i remove it

  Read the article

• Linux file structure

  - by morpheous

  ok. I asked this question earlier(as part of another question) and got no response - so here it is again: what i the recommened directory for me to store the following: 1). my apps 2). development tools (C++ tools) 3). AMP applications for LAMP stack (Apache, MySQL, PHP) 4). files for websites that I develop on my machine - e.g. website1, website2 etc ...

  Read the article

• McAfee Security Scan appears out of thin air

  - by Jacques

  Hi, We have a Windows Server 2008 Standard edition server and when we logged in today a service, McAfee Security Scan, had been installed. I checked all the logs, but can't find any trace of who or how this install was initiated. We already use Nod32 so there would be no reason for us to install McAfee. Any idea how this happens? I did look for other installs like Flash or the like, but didn't see anything. Thanks Jacques

  Read the article

• How to redirect Cisco IOS's show output to HTTP URL?

  - by yegle

  I found there's a redirect output modifier of Cisco IOS ( version 12.2(53)SE1 ), and there's http: URI support: #sh version | redirect ? flash: Uniform Resource Locator ftp: Uniform Resource Locator http: Uniform Resource Locator https: Uniform Resource Locator nvram: Uniform Resource Locator rcp: Uniform Resource Locator scp: Uniform Resource Locator tftp: Uniform Resource Locator However, I cannot find any document on cisco.com about the http support. I tried sh version | redirect http://my_server/ and cannot find any information on my_server's access log. Can anyone give me a hint?

  Read the article

• automating remote software installation

  - by akshay

  I have a network consisting of n pcs(windows/linux).Now i want to automate installation on n pcs in netowrk.For example with one click of gtalk should get installed on n pc in network.Are there any softwares(paid/open src) that can be used to do this?One such software is IBM TPM but its dam expensive and complicated i guess.Are such software popular, cam asking this since i am planning to develop such software which is low priced.

  Read the article

• Program that can count the most frequently used keys pressed on keyboard?

  - by sunpech

  Any recommendations on a program that I can manually start/stop to run in the background that will measure (count) how many times a key is pressed on the keyboard? As a software developer, I'd like to know which keys are used the most when I develop from project to project and/or from language to language. I'd like to be able to manually start and stop the program. This is for a Windows PC (xp, vista, 7)

  Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >