interface implementation - Page 211

Integration with Multiple Versions of BizTalk HL7 Accelerator Schemas

- by Paul Petrov

Microsoft BizTalk Accelerator for HL7 comes with multiple versions of the HL7 implementation. One of the typical integration tasks is to receive one format and transmit another. For example, system A works HL7 v2.4 messages, system B with v2.3, and system C with v2.2. The system A is exchanging messages with B and C. The logical solution is to create schemas in separate namespaces for each system and assign maps on send ports. Schematic diagram of the messaging solution is shown below: Nothing is complex about that conceptually. On the implementation level things can get nasty though because of the elaborate nature of HL7 schemas and sheer amount of message types involved. If trying to implement maps directly in BizTalk Map Editor one would quickly get buried by thousands of links between subfields of HL7 segments. Since task is repetitive because HL7 segments are reused between message types it's natural to take advantage of such modular structure and reduce amount of work through reuse. Here's where it makes sense to switch from visual map editor to old plain XSLT. The implementation is done in three steps. First, create XSL templates to map from segments of one version to another. This can be done using BizTalk Map Editor subsequently copying and modifying generated XSL code to create one xsl:template per segment. Group all segments for format mapping in one XSL file (we call it SegmentTemplates.xsl). Here's how template for the PID segment (Patient Identification) would look like this: <xsl:template name="PID"> <PID_PatientIdentification> <xsl:if test="PID_PatientIdentification/PID_1_SetIdPatientId"> <PID_1_SetIdPid> <xsl:value-of select="PID_PatientIdentification/PID_1_SetIdPatientId/text()" /> </PID_1_SetIdPid> </xsl:if> <xsl:for-each select="PID_PatientIdentification/PID_2_PatientIdExternalId"> <PID_2_PatientId> <xsl:if test="CX_0_Id"> <CX_0_Id> <xsl:value-of select="CX_0_Id/text()" /> </CX_0_Id> </xsl:if> <xsl:if test="CX_1_CheckDigit"> <CX_1_CheckDigitSt> <xsl:value-of select="CX_1_CheckDigit/text()" /> </CX_1_CheckDigitSt> </xsl:if> <xsl:if test="CX_2_CodeIdentifyingTheCheckDigitSchemeEmployed"> <CX_2_CodeIdentifyingTheCheckDigitSchemeEmployed> <xsl:value-of select="CX_2_CodeIdentifyingTheCheckDigitSchemeEmployed/text()" /> </CX_2_CodeIdentifyingTheCheckDigitSchemeEmployed> . . . // skipped for brevity This is the most tedious and time consuming part. Templates can be created for only those segments that are used in message interchange. Once this is done the rest goes much easier. The next step is to create message type specific XSL that references (imports) segment templates XSL file. Inside this file simple call segment templates in appropriate places. For example, beginning of the mapping XSL for ADT_A01 message would look like this: <xsl:import href="SegmentTemplates_23_to_24.xslt" /> <xsl:output omit-xml-declaration="yes" method="xml" version="1.0" /> <xsl:template match="/"> <xsl:apply-templates select="s0:ADT_A01_23_GLO_DEF" /> </xsl:template> <xsl:template match="s0:ADT_A01_23_GLO_DEF"> <ns0:ADT_A01_24_GLO_DEF> <xsl:call-template name="EVN" /> <xsl:call-template name="PID" /> <xsl:for-each select="PD1_PatientDemographic"> <xsl:call-template name="PD1" /> </xsl:for-each> <xsl:call-template name="PV1" /> <xsl:for-each select="PV2_PatientVisitAdditionalInformation"> <xsl:call-template name="PV2" /> </xsl:for-each> This code simply calls segment template directly for required singular elements and in for-each loop for optional/repeating elements. And lastly, create BizTalk map (btm) that references message type specific XSL. It is essentially empty map with Custom XSL Path set to appropriate XSL: In the end, you will end up with one segment templates file that is referenced by many message type specific XSL files which in turn used by BizTalk maps. Once all segment maps are created they are widely reusable and all the rest work is very simple and clean.

Read the article

Identity R2 - Experts Podcast Series

- by Tanu Sood

To follow up on the Identity Management R2 launch, a series of podcasts were recorded with subject matter experts from customer organizations, our partners and Oracle’s PM team to discuss key trends, R2 capabilities, implementation best practices and more. Below is a roll-up of the podcast series that is available on Fusion Middleware radio. R2 Podcasts: · Designing the Next-Generation Identity Platform Vadim Lander, Oracle Highlights: Common architecture model, integration, interoperability and the driving factors behind R2 innovation IT Departments are shifting their Identity Management strategy to be able to support mobile, cloud and social applications. Oracle has anticipated this shift and has built a product roadmap to take advantage of this focus. Join Vadim as he discusses the design strategy behind the latest 11gR2 release and talks about how IDM services have to evolve to meet this new challenge. · BETA Customer Perspective on R2 Ravi Meduri, Kaiser Permanente Highlights: R2 scalability and high availability In this podcast Ravi discusses the new features in 11gR2 that he is most interested in, including High Availability options for Access Management, multi-datacenter architecture, and what it was like working with the Oracle product team during the BETA program. · Partner Perspective on R2 Rex Thexton, PricewaterhouseCoopers Highlights: Usability Enhancements for Users and Administrators A lot of new usability features went into the 11gR2 release making this the most business friendly IDM release to date. In this podcast Rex Thexton, Managing Director from PwC, talks about some of the new UI changes for both end users and administrators, and also about the new connector creation framework. Access Request Updates in R2 Marc Boroditsky, Oracle Highlights: Access request User Interface innovations A lot of changes have been made to the Access Request user interface in the latest version of Oracle Identity Manager 11gR2. A real focus has been put on making the request process more business user friendly, and a lot of new customization capability has been added for the IT administrators. Hear Marc discuss the updated UI, and explain how administrators will be able to customize OIM to meet their company's requirements · Oracle Optimized System for Oracle Unified Directory (OOS4OUD) Nick Kloski, Oracle Highlights: New Optimized System configuration for Unified Directory One of the new features in 11gR2 is the availability of an Optimized System configuration for Oracle Unified Directory. Oracle engineers installed the OUD software onto off the shelf hardware and then created a performance tuned configuration. Join us as we talk to Nick Kloski, Infrastructure Solutions Manager, all about the testing process and the resulting performance metrics. Privileged Account Management Mark Wilcox, Oracle Highlights: Oracle Privileged Account Manager key capabilities, use cases The new release of Oracle Identity Management 11g R2 includes the capability to manage privileged accounts. Privileged accounts, if compromised, create a risk for fraud in the enterprise and as a result controlling access to privileged accounts is critical. Hear what Mark Wilcox, Principal Product Manager of Oracle Privileged Account Manager has to say about the capabilities of the offering in this podcast. · Browser-based User Interface (UI) Customization Clayton Donley, Oracle Highlights: Benefits of Durable UI Configuration framework Business users need user interfaces that are not only friendly but also easily customizable. However the downside of any customization project is the cost and complexity involved in developing, testing, deploying and managing custom code. In this podcast, we examine how a new capability in Oracle Identity Management around browser based UI customization can reduce costs and complexity of customization while simplifying self service integration with corporate portal strategies. · Simplifying Mobile and Social Sign-On Dan Killmer, Oracle Highlights: Secure mobile sign-on and consumption of social identities with Oracle Access Management The proliferation of mobile devices has spurred a new trend where employees tend to bring their own mobile devices to work and access corporate applications the same way they would access from a desktop or laptop. In this podcast, we examine how Oracle's latest innovation in Identity Management around Mobile and Social Sign On can simplify security and access management challenges posed by the widespread adoption of mobile devices in the enterprise. · Enabling Your Business with IDM R2 Scott Bonnell, Oracle Highlights: Self service, mobile access, personalization Gone are the days when Identity Management was just about stopping unauthorized users in their tracks. Identity Management if done right, can also enable your business. Join Scott Bonnell as he discusses how the IDM 11gR2 release enables the enterprise by providing self service, personalization and mobile access to corporate resources.

Read the article

GlassFish Clustering with DCOM on Windows

- by ByronNevins

DCOM - Distributed COM, a Microsoft protocol for communicating with Windows machines. Why use DCOM? In GlassFish 3.1 SSH is used as the standard way to run commands on remote nodes for clustering. It is very difficult for users to get SSH configured properly on Windows. SSH does not come with Windows so we have to depend on third party tools. And then the user is forced to install and configure these tools -- which can be tricky. DCOM is available on all supported platforms. It is built-in to Windows. The idea is to use DCOM to communicate with remote Windows nodes. This has the huge advantage that the user has to do minimal, if any, configuration on the Windows nodes. Implementation HighlightsTwo open Source Libraries have been added to GlassFish: Jcifs – a SAMBA implementation in Java J-interop – A Java implementation for making DCOM calls to remote Windows computers. Note that any supported platform can use DCOM to work with Windows nodes -- not just Windows.E.g. you can have a Linux DAS work with Windows remote instances.All existing SSH commands now have a corresponding DCOM command – except for setup-ssh which isn’t needed for DCOM. validate-dcom is an all new command. New DCOM Commands create-node-dcom delete-node-dcom install-node-dcom list-nodes-dcom ping-node-dcom uninstall-node-dcom update-node-dcom validate-dcom setup-local-dcom (This is only available via Update Center for GlassFish 3.1.2) These commands are in-place in the trunk (4.0). And in the branch (3.1.2) Windows Configuration Challenges There are an infinite number of possible configurations of Windows if you look at it as a combination of main release, service-pack, special drivers, software, configuration etc. Later versions of Windows err on the side of tightening security be default. This means that the Windows host may need to have configuration changes made.These configuration changes mostly need to be made by the user. setup-local-dcom will assist you in making required changes to the Windows Registry. See the reference blogs for details. The validate-dcom Command validate-dcom is a crucial command. It should be run before any other commands. If it does not run successfully then there is no point in running other commands.The validate-dcom command must be used from a DAS machine to test a different Windows machine. If validate-dcom runs successfully you can be confident that all the DCOM commands will work. Conversely, the opposite is also true: If validate-dcom fails, then no DCOM commands will work. What validate-dcom does Verify that the remote host is not the local machine. Resolves the remote host name Checks that the remote DCOM port is being listened on (135, 139) Checks that the remote host’s File Sharing is enabled (port 445) It copies a file (a script) to the remote host to verify that SAMBA is working and authorization is correct It runs a script that it copied on-the-fly to the remote host. Tips and Tricks The bread and butter commands that use DCOM are existing commands like create-instance, start-instance etc. All of the commands that have dcom in their name are for dealing with the actual nodes. The way the software works is to call asadmin.bat on the remote machine and run a command. This means that you can track these commands easily on the remote machine with the usual tools. E.g. using AS_LOGFILE, looking at log files, etc. It’s easy to attach a debugger to the remote asadmin process, “just in time”, if necessary. How to debug the remote commands:Edit the asadmin.bat file that is in the glassfish/bin folder. Use glassfish/lib/nadmin.bat in GlassFish 4.0+Add these options to the java call:-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=1234 Now if you run, say start-instance on DAS, you can attach your debugger, at your leisure, to the remote machines port 1234. It will be running start-local-instance and patiently waiting for you to attach.

Read the article

Yet another blog about IValueConverter

- by codingbloke

After my previous blog on a Generic Boolean Value Converter I thought I might as well blog up another IValueConverter implementation that I use. The Generic Boolean Value Converter effectively converters an input which only has two possible values to one of two corresponding objects. The next logical step would be to create a similar converter that can take an input which has multiple (but finite and discrete) values to one of multiple corresponding objects. To put it more simply a Generic Enum Value Converter. Now we already have a tool that can help us in this area, the ResourceDictionary. A simple IValueConverter implementation around it would create a StringToObjectConverter like so:- StringToObjectConverter using System; using System.Windows; using System.Windows.Data; using System.Linq; using System.Windows.Markup; namespace SilverlightApplication1 { [ContentProperty("Items")] public class StringToObjectConverter : IValueConverter { public ResourceDictionary Items { get; set; } public string DefaultKey { get; set; } public StringToObjectConverter() { DefaultKey = "__default__"; } public virtual object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { if (value != null && Items.Contains(value.ToString())) return Items[value.ToString()]; else return Items[DefaultKey]; } public virtual object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { return Items.FirstOrDefault(kvp => value.Equals(kvp.Value)).Key; } } } There are some things to note here. The bulk of managing the relationship between an object instance and the related string key is handled by the Items property being an ResourceDictionary. Also there is a catch all “__default__” key value which allows for only a subset of the possible input values to mapped to an object with the rest falling through to the default. We can then set one of these up in Xaml:- <local:StringToObjectConverter x:Key="StatusToBrush"> <ResourceDictionary> <SolidColorBrush Color="Red" x:Key="Overdue" /> <SolidColorBrush Color="Orange" x:Key="Urgent" /> <SolidColorBrush Color="Silver" x:Key="__default__" /> </ResourceDictionary> </local:StringToObjectConverter> You could well imagine that in the model being bound these key names would actually be members of an enum. This still works due to the use of ToString in the Convert method. Hence the only requirement for the incoming object is that it has a ToString implementation which generates a sensible string instead of simply the type name. I can’t imagine right now a scenario where this converter would be used in a TwoWay binding but there is no reason why it can’t. I prefer to avoid leaving the ConvertBack throwing an exception if that can be be avoided. Hence it just enumerates the KeyValuePair entries to find a value that matches and returns the key its mapped to. Ah but now my sense of balance is assaulted again. Whilst StringToObjectConverter is quite happy to accept an enum type via the Convert method it returns a string from the ConvertBack method not the original input enum type that arrived in the Convert. Now I could address this by complicating the ConvertBack method and examining the targetType parameter etc. However I prefer to a different approach, deriving a new EnumToObjectConverter class instead. EnumToObjectConverter using System; namespace SilverlightApplication1 { public class EnumToObjectConverter : StringToObjectConverter { public override object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { string key = Enum.GetName(value.GetType(), value); return base.Convert(key, targetType, parameter, culture); } public override object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { string key = (string)base.ConvertBack(value, typeof(String), parameter, culture); return Enum.Parse(targetType, key, false); } } } This is a more belts and braces solution with specific use of Enum.GetName and Enum.Parse. Whilst its more explicit in that the a developer has to choose to use it, it is only really necessary when using TwoWay binding, in OneWay binding the base StringToObjectConverter would serve just as well. The observant might note that there is actually no “Generic” aspect to this solution in the end. The use of a ResourceDictionary eliminates the need for that.

Read the article

Monitoring your WCF Web Apis with AppFabric

- by cibrax

The other day, Ron Jacobs made public a template in the Visual Studio Gallery for enabling monitoring capabilities to any existing WCF Http service hosted in Windows AppFabric. I thought it would be a cool idea to reuse some of that for doing the same thing on the new WCF Web Http stack. Windows AppFabric provides a dashboard that you can use to dig into some metrics about the services usage, such as number of calls, errors or information about different events during a service call. Those events not only include information about the WCF pipeline, but also custom events that any developer can inject and make sense for troubleshooting issues. This monitoring capabilities can be enabled on any specific IIS virtual directory by using the AppFabric configuration tool or adding the following configuration sections to your existing web app, <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> <diagnostics etwProviderId="3e99c707-3503-4f33-a62d-2289dfa40d41"> <endToEndTracing propagateActivity="true" messageFlowTracing="true" /> </diagnostics> <behaviors> <serviceBehaviors> <behavior name=""> <etwTracking profileName="EndToEndMonitoring Tracking Profile" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> <microsoft.applicationServer> <monitoring> <default enabled="true" connectionStringName="ApplicationServerMonitoringConnectionString" monitoringLevel="EndToEndMonitoring" /> </monitoring> </microsoft.applicationServer> Bad news is that none of the configuration above can be easily set on code by using the new configuration model for WCF Web stack. A good thing is that you easily disable it in the configuration when you no longer need it, and also uses ETW, a general-purpose and high-speed tracing facility provided by the operating system (it’s part of the windows kernel). By adding that configuration section, AppFabric will start monitoring your service automatically and providing some basic event information about the service calls. You need some custom code for injecting custom events in the monitoring data. What I did here is to copy and refactor the “WCFUserEventProvider” class provided as sample in the Ron’s template to make it more TDD friendly when using IoC. I created a simple interface “ILogger” that any service (or resource) can use to inject custom events or monitoring information in the AppFabric database. public interface ILogger { bool WriteError(string name, string format, params object[] args); bool WriteWarning(string name, string format, params object[] args); bool WriteInformation(string name, string format, params object[] args); } The “WCFUserEventProvider” class implements this interface by making possible to send the events to the AppFabric monitoring database. The service or resource implementation can receive an “ILogger” as part of the constructor. [ServiceContract] [Export] public class OrderResource { IOrderRepository repository; ILogger logger; [ImportingConstructor] public OrderResource(IOrderRepository repository, ILogger logger) { this.repository = repository; this.logger = logger; } [WebGet(UriTemplate = "{id}")] public Order Get(string id, HttpResponseMessage response) { var order = this.repository.All.FirstOrDefault(o => o.OrderId == int.Parse(id, CultureInfo.InvariantCulture)); if (order == null) { response.StatusCode = HttpStatusCode.NotFound; response.Content = new StringContent("Order not found"); } this.logger.WriteInformation("Order Requested", "Order Id {0}", id); return order; } } The example above uses “MEF” as IoC for injecting a repository and the logger implementation into the service. You can also see how the logger is used to write an information event in the monitoring database. The following image illustrates how the custom event is injected and the information becomes available for any user in the dashboard. An issue that you might run into and I hope the WCF and AppFabric teams fixed soon is that any WCF service that uses friendly URLs with ASP.NET routing does not get listed as a available service in the WCF services tab in the AppFabric console. The complete example is available to download from here.

Read the article

BIP and Mapviewer Mash Up I

- by Tim Dexter

I was out in Yellowstone last week soaking up various wildlife and a bit too much rain ... good to be back until the 95F heat yesterday. Taking a little break from the Excel templates; the dev folks are planing an Excel patch in the next week or so that will add a mass of new functionality. At the risk of completely mis leading you I'm going to hang back a while. What I have written so far holds true and will continue to do so. This week, I have been mostly eating 'mapviewer' ... answers on a post card please, TV show and character. I had a request to show how BIP can call mapviewer and render a dynamic map in an output. So I hit the books and colleagues for some answers. Mapviewer is Oracle's geographic information system, hereby known as GIS. I use it a lot in our BIEE demos where the interaction with the maps is very impressive. Need a map of California and its congressional districts? I have contacts; Jerry and David with their little black box of maps. Once in my possession I can build highly interactive, clickable maps that allow the user to drill into more information using a very friendly interface driving BIEE content and navigation. But what about maps in BIP output? Bryan Wise, who has written some articles on this blog did some work a while back with the PL/SQL API interface. The extract for the report called a function that in turn called the mapviewer server, passing a set of mapping requirements, it then returned a URL to a cached copy of that map. Easy to then have BIP render that image. Thats still very doable. You need to install a couple of packages and then load the mapviewer java APIs into the database. Then you can write your function to the APIs. A little involved? Maybe, but the database is doing all the heavy lifting for you. I thought I would investigate another method for getting the maps back into BIP. There is a URL interface you can call, this involves building an XML message to be passed to the mapviewer server. It's pretty straightforward to use on the mapviewer side. On the BIP side things are little more tricksy. After some unexpected messing about I finally got the ubiquitous Hello World map to render using the URL method. Not the most exciting map in the world, lots of ocean and a rather long URL to get it to render. http://127.0.0.1:9704/mapviewer/omserver?xml_request=%3Cmap_request%20title=%22Hello%20World%22%20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E Notice all of the encoding in the URL string to handle the spaces, quotes, etc. All necessary to get BIP to make the call to the mapviewer server correctly without truncating the URL if it hits a real space rather than a %20. With that in mind constructing the URL was pretty simple. I'm not going to get into the content of the URL too much, for that you need to bone up on the mapviewer XML API. Check out the home page here and the documentation here. To make the template portable I used the standard CURRENT_SERVER_URL parameter from the BIP server and declared that in my template. <?param@begin:CURRENT_SERVER_URL;'myserver'?> Ignore the 'myserver', that was just a dummy value for testing at runtime it will resolve to: 'http://yourserver:port/xmlpserver' Not quite what we need as mapviewer has its own server path, in my case I needed 'mapviewer/omserver?xml_request=' as the fixed path to the mapviewer request URL. A little concatenation and substringing later I came up with <?param@begin:mURL;concat(substring($CURRENT_SERVER_URL,1,22),'mapviewer/omserver?xml_request=')?> Thats the basic URL that I can then build on. To get the Hello World map I need to add the following: <map_request title="Hello World" datasource="cagis" format="GIF_STREAM"/> Those angle brackets were the source of my headache, BIPs XSLT engine was attempting to process them rather than just pass them. Hok Min to the rescue ... again. I owe him lunch when I get out to HQ again! To solve the problem, I needed to escape all the characters and white space and then use native XSL to assign the string to a parameter. <xsl:param xdofo:ctx="begin"name="pXML">%3Cmap_request%20title=%22Hello%20World%22 %20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E</xsl:param> I did not need to assign it to a parameter but I felt that if I were going to do anything more serious than Hello World like plotting points of interest on the map. I would need to dynamically build the URL, so using a set of parameters or variables that I then concatenated would be easier. Now I had the initial server string and the request all I then did was combine the two using a concat: concat($mURL,$pXML) Embedding that into an image tag: <fo:external-graphic src="url({concat($mURL,$pXML)})"/> and I was done. Notice the curly braces to get the concat evaluated prior to the image call. As you will see next time, building the XML message to go onto the URL can get quite complex but I have used it with some data. Ultimately, it would be easier to build an extension to BIP to handle the data to be plotted, it would then build the XML message, call mapviewer and return a URL to the map image for BIP to render. More on that next time ...

Read the article

Can't connect to Wired Network after installing 12.04

- by ezz9

I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

Read the article

Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore

- by sathya

Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore I was really excited on attending the day 1 of Microsoft TechEd 2010 in Bangalore. This is the first Teched that am attending. The event was really fun filled with lot of knowledge sharing sessions and lots of goodies and gifts by the partners Initially the Event Started by Murthy's Session. He explained about the Developers relating to the 5 elements of nature (Pancha Boothaas) 1. Fire - Passion 2. Wave (Water) - Catch the right wave which we need to apply. 3. Earth - Connections and lots of opportunities around the world 4. Air - Its whatever we breathe. Developers.. Without them nothing is possible. they are like the air 5. Sky - Cloud based applications Next the Keynote and the announcement of Visual Studio by SomaSegar. List of things that he delivered his speech on : 1. Announcement of Visual Studio 2010 2. Announcement of .NET 4.0 3. Announcement of Silverlight later this week 4. What is the current Trend? Microsoft has done a research with many developers across the globe and have got the following feedback from the users. Get Lost (interrupted) - When we do some work and somebody is calling or interrepting by someother way we lose track of what we were doing and we need to do from the start Falling Behind- Technology gets updated phenomenally over a period of time and developers always have a scenario like they are not in the state of the art technology and they always have a doubt whether they are staying updated. Lack of Collobaration - When a Manager asks a person what the team members have done and some might be done and some might not be and finally all are into a state like we dont know where we are. So they have addressed these 3 points in the VS 2010 by the following features : Get Lost - Some cool features which could overcome this. We have some Graphical interface. which could show what we have done and where we are. Some Zoom features in the code level. Falling Behind - Everything is based on .NET language base. 2010 has been built in such a way that if developers know the native language that's enough for building good applications. Lack of Collobaration - Some Dashboard Features which would show where exactly the project is. And a graphical user interface is shown on clicking which it directly drills down even to the code level. 5. An overview on all new features in VS 2010. 6. Some good demos of new features in VS 2010 by Polita and one more girl. Some of the new features included : 1. Team Explorer 2. Zoom in Code 3. Ribbon Development 4. Development in Single Platform for Windows Phone, XBox, Zune, Azure, Web Based and Windows based applications 5. Sequence Diagram Generation directly from code 6. Dashboards to show project status 7. Javascript and JQuery intellisense 8. Native support for JQuery 9. Packaging feature while deploying. 10. Generation of different versions of web.config like Web.Config.Production, Web.Config.Staging, etc. 11. IntelliTrace - Eliminating the "Not Reproducible" statement. 12. Automated User Interface Testing. At last in the closing of the day we had a great event called Demo Extravaganza, where lot of cool projects that were launched by Microsoft and also the projects that are under research were also shown. I got a lot of info about Bing today. BING really rocks!!! It has the following : 1. Visual Search 2. Product based search. For each product different menu filters were provided to make an advanced search 3. BING Maps was awesome!! It zoomed in to the street level and we can assume that we are the persons who are walking or running on the road and we can see the real objects like buildings moving by our side. 4. PhotoSynth was used in BING to show up all the images taken around the globe in a 3D format. 5. Formula - If we give some formula it automatically gives the value for the variable or derivation of expression Also some info about some kool touch apps which does an authentication and computation of Teched Attendee's Points that they have scored and the sessions attended. One guy won an XBOX in lucky draw as a gift. There were lot of Partner Stalls like Accenture,Intel,Citrix,MicroFocus,Telerik,infragistics,Sapient etc. Some Offers were provided for us like 50% off on Certifications, 1 free Elearning Course, etc. Stay tuned!! Wil update you on other events too..

Read the article

Common usecases and techniques when integrating a 3rd party application with Oracle Sales Cloud

- by asantaga

Over the last year or so I've see a lot of partners migrating and integrate their applications with Oracle Sales Cloud. Interestingly I'd say 60% of the partners use the same set of design patterns over and over again. Most of the time I see that they want to embed their application into Oracle Sales Cloud, within a tab usually, perhaps click on a link to their application (passing some piece of data + credentials) and then within their application update sales cloud again using webservices. Here are some examples of the different use-cases I've seen , and how partners are embedding their applications into Sales Cloud, NB : The following examples use the "Desktop" User Interface rather than the Newer "Simplified User Interface", I'll update the sample application soon but the integration patterns are precisely the same Use Case 1 : Navigator "Link out" to third party application This is an example of where the developer has added a link to the global navigator and this links out to the 3rd Party Application. Typically one doesn't pass any contextual data with the exception of perhaps user credentials, or better still JWT Token. Techniques Used Adding Link to Menu Item Using JWT Token in Sales Cloud Use Case 2 : Application Embedded within the Sales Cloud Dashboard Within the Oracle Sales Cloud application there is a tab called "Sales", within this tab its possible to embed a SubTab and embed a iFrame pointing to your application. To do this the developer simply needs to edit the page in customization mode, add the tab and then add the iFrame, simples! The developer can pass credentials/JWT Token and some other pieces of data but not object data (ie the current OpportunityID etc) Techniques Used Adding a page to the dashboard Using JWT Token in Sales Cloud Use Case 3 : Embedding a Tab and Context Linking out from a Sales Cloud object to the 3rd party application In this usecase the developer embeds two components into Oracle Sales Cloud. The first is a SubTab showing summary data to the user (a quote in our case) and then secondly a hyperlink, (although it could be a button) which when clicked navigates the user to the 3rd party application. In this case the developer almost always passes context specific data (i.e. the opportunityId) and a security token (username password combo or JWT Token). The third party application usually takes the data, perhaps queries more data using the Sales Cloud SOAP/WebService interface and then displays the resulting mashup to the user for further processing. When the user has finished their work in the 3rd party application they normally navigate back to Oracle Sales Cloud using what's called a "DeepLink", ie taking them back to the object [opportunity in our case] they came from. This image visually shows a "Happy Path" a user may follow, and combines linking out to an application , webservice calls and deep linking back to Sales Cloud. Techniques Used Extending a SalesCloud application with a custom button Using JWT Token in Sales Cloud Extending Oracle Sales Cloud [Opportnity] with a custom tab exposing External Content Retrieving Data from Oracle Sales cloud using WebServices Coding some groovy script to generate the URLs required (Doc 1571200.1 on MyOracle Support) DeepLinking to specific Oracle Sales Cloud Pages (Doc 1516151.1 on My Oracle Support) Use-Case 4 : Server Side processing/synchronization This usecase focuses on the Server Side processing of data, in this case synchronizing data. Here the 3rd party application is running on a "timer", e.g. cron or similar, and when triggered it queries data from Oracle Sales Cloud, then it queries data from the 3rd party application, determines the deltas and then inserts the data where required. Specifically here we are calling Oracle Sales Cloud using SOAP/WebServices and the 3rd party application is being communicated to using the REST API, for Oracle Sales Cloud one would use standard JAX-WS WebService calls and for REST one would use the JAX-RS api and perhap the Jackson api for managing JSON objects.. This is a very common use case and one which specifically lends itself to using the Oracle Java Cloud Service as the ideal application server where to host the mediator between the two applications. Techniques Used Using JWT Token in Sales Cloud Integrating with the Oracle Java Cloud Service Retrieving Data from Oracle Sales cloud using WebServices General Resources The above is just a small set of techniques and use-cases which are used today. There are plenty of other sources of documentation and resources available on the internet but to get you started here are a few of my favourite places Sales Cloud General Documentation Sales Cloud Customize Tab is useful for general customization of Sales Cloud Sales Cloud Integration Tab focuses on the 3rd party integration techniques Official Oracle Fusion Developer Relations Blog Official Oracle Fusion Developer Relations YouTube Channel Enjoy integrating!

Read the article

USB external drive is not recognized by any OS, how to troubleshoot in Ubuntu?

- by Breno

First of all I would like to inform you that I saw a question similar to mine but the error was different, so here's my problem... I have an external HD samsung s2 model of 500GB and a day to day just stopped working, tried in other systems (windows and mac) however are not recognized. In the windows device manager when I insert the usb it states that the device in question are not working properly. Well, in the logs of my ubuntu 4.12 I see the following message when I insert my usb device in: [ 2967.560216] usb 7-2: new full-speed USB device number 2 using uhci_hcd [ 2967.680182] usb 7-2: device descriptor read/64, error -71 [ 2967.904176] usb 7-2: device descriptor read/64, error -71 [ 2968.120227] usb 7-2: new full-speed USB device number 3 using uhci_hcd [ 2968.240207] usb 7-2: device descriptor read/64, error -71 [ 2968.464063] usb 7-2: device descriptor read/64, error -71 [ 2968.680087] usb 7-2: new full-speed USB device number 4 using uhci_hcd [ 2969.092085] usb 7-2: device not accepting address 4, error -71 [ 2969.208155] usb 7-2: new full-speed USB device number 5 using uhci_hcd [ 2969.624076] usb 7-2: device not accepting address 5, error -71 [ 2969.624118] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 4520.240340] usb 7-1: new full-speed USB device number 6 using uhci_hcd [ 4520.364079] usb 7-1: device descriptor read/64, error -71 [ 4520.588109] usb 7-1: device descriptor read/64, error -71 [ 4520.804140] usb 7-1: new full-speed USB device number 7 using uhci_hcd [ 4520.924136] usb 7-1: device descriptor read/64, error -71 [ 4521.148083] usb 7-1: device descriptor read/64, error -71 [ 4521.364105] usb 7-1: new full-speed USB device number 8 using uhci_hcd [ 4521.776237] usb 7-1: device not accepting address 8, error -71 [ 4521.888206] usb 7-1: new full-speed USB device number 9 using uhci_hcd [ 4522.296102] usb 7-1: device not accepting address 9, error -71 [ 4522.296150] hub 7-0:1.0: unable to enumerate USB device on port 1 [ 4749.036104] usb 7-2: new full-speed USB device number 10 using uhci_hcd [ 4749.156209] usb 7-2: device descriptor read/64, error -71 [ 4749.380215] usb 7-2: device descriptor read/64, error -71 [ 4749.596206] usb 7-2: new full-speed USB device number 11 using uhci_hcd [ 4749.716409] usb 7-2: device descriptor read/64, error -71 [ 4749.940110] usb 7-2: device descriptor read/64, error -71 [ 4750.156257] usb 7-2: new full-speed USB device number 12 using uhci_hcd [ 4750.572150] usb 7-2: device not accepting address 12, error -71 [ 4750.684215] usb 7-2: new full-speed USB device number 13 using uhci_hcd [ 4751.100182] usb 7-2: device not accepting address 13, error -71 [ 4751.100224] hub 7-0:1.0: unable to enumerate USB device on port 2 Here is my system: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Does anyone have any clue what would be the problem?

Read the article

The Virtues and Challenges of Implementing Basel III: What Every CFO and CRO Needs To Know

- by Jenna Danko

The Basel Committee on Banking Supervision (BCBS) is a group tasked with providing thought-leadership to the global banking industry. Over the years, the BCBS has released volumes of guidance in an effort to promote stability within the financial sector. By effectively communicating best-practices, the Basel Committee has influenced financial regulations worldwide. Basel regulations are intended to help banks: More easily absorb shocks due to various forms of financial-economic stress Improve risk management and governance Enhance regulatory reporting and transparency In June 2011, the BCBS released Basel III: A global regulatory framework for more resilient banks and banking systems. This new set of regulations included many enhancements to previous rules and will have both short and long term impacts on the banking industry. Some of the key features of Basel III include: A stronger capital base More stringent capital standards and higher capital requirements Introduction of capital buffers Additional risk coverage Enhanced quantification of counterparty credit risk Credit valuation adjustments Wrong way risk Asset Value Correlation Multiplier for large financial institutions Liquidity management and monitoring Introduction of leverage ratio Even more rigorous data requirements To implement these features banks need to embark on a journey replete with challenges. These can be categorized into three key areas: Data, Models and Compliance. Data Challenges Data quality - All standard dimensions of Data Quality (DQ) have to be demonstrated. Manual approaches are now considered too cumbersome and automation has become the norm. Data lineage - Data lineage has to be documented and demonstrated. The PPT / Excel approach to documentation is being replaced by metadata tools. Data lineage has become dynamic due to a variety of factors, making static documentation out-dated quickly. Data dictionaries - A strong and clean business glossary is needed with proper identification of business owners for the data. Data integrity - A strong, scalable architecture with work flow tools helps demonstrate data integrity. Manual touch points have to be minimized. Data relevance/coverage - Data must be relevant to all portfolios and storage devices must allow for sufficient data retention. Coverage of both on and off balance sheet exposures is critical. Model Challenges Model development - Requires highly trained resources with both quantitative and subject matter expertise. Model validation - All Basel models need to be validated. This requires additional resources with skills that may not be readily available in the marketplace. Model documentation - All models need to be adequately documented. Creation of document templates and model development processes/procedures is key. Risk and finance integration - This integration is necessary for Basel as the Allowance for Loan and Lease Losses (ALLL) is calculated by Finance, yet Expected Loss (EL) is calculated by Risk Management – and they need to somehow be equal. This is tricky at best from an implementation perspective. Compliance Challenges Rules interpretation - Some Basel III requirements leave room for interpretation. A misinterpretation of regulations can lead to delays in Basel compliance and undesired reprimands from supervisory authorities. Gap identification and remediation - Internal identification and remediation of gaps ensures smoother Basel compliance and audit processes. However business lines are challenged by the competing priorities which arise from regulatory compliance and business as usual work. Qualification readiness - Providing internal and external auditors with robust evidence of a thorough examination of the readiness to proceed to parallel run and Basel qualification In light of new regulations like Basel III and local variations such as the Dodd Frank Act (DFA) and Comprehensive Capital Analysis and Review (CCAR) in the US, banks are now forced to ask themselves many difficult questions. For example, executives must consider: How will Basel III play into their Risk Appetite? How will they create project plans for Basel III when they haven’t yet finished implementing Basel II? How will new regulations impact capital structure including profitability and capital distributions to shareholders? After all, new regulations often lead to diminished profitability as well as an assortment of implementation problems as we discussed earlier in this note. However, by requiring banks to focus on premium growth, regulators increase the potential for long-term profitability and sustainability. And a more stable banking system: Increases consumer confidence which in turn supports banking activity Ensures that adequate funding is available for individuals and companies Puts regulators at ease, allowing bankers to focus on banking Stability is intended to bring long-term profitability to banks. Therefore, it is important that every banking institution takes the steps necessary to properly manage, monitor and disclose its risks. This can be done with the assistance and oversight of an independent regulatory authority. A spectrum of banks exist today wherein some continue to debate and negotiate with regulators over the implementation of new requirements, while others are simply choosing to embrace them for the benefits I highlighted above. Do share with me how your institution is coping with and embracing these new regulations within your bank. Dr. Varun Agarwal is a Principal in the Banking Practice for Capgemini Financial Services. He has over 19 years experience in areas that span from enterprise risk management, credit, market, and to country risk management; financial modeling and valuation; and international financial markets research and analyses.

Read the article

obj-c classes and sub classes (Cocos2d) conversion

- by Lewis

Hi I'm using this version of cocos2d: https://github.com/krzysztofzablocki/CCNode-SFGestureRecognizers Which supports the UIGestureRecognizer within a CCLayer in a cocos2d scene like so: @interface HelloWorldLayer : CCLayer <UIGestureRecognizerDelegate> { } Now I want to make this custom gesture work within the scene, attaching it to a sprite in cocos2d: #import <Foundation/Foundation.h> #import <UIKit/UIGestureRecognizerSubclass.h> @protocol OneFingerRotationGestureRecognizerDelegate <NSObject> @optional - (void) rotation: (CGFloat) angle; - (void) finalAngle: (CGFloat) angle; @end @interface OneFingerRotationGestureRecognizer : UIGestureRecognizer { CGPoint midPoint; CGFloat innerRadius; CGFloat outerRadius; CGFloat cumulatedAngle; id <OneFingerRotationGestureRecognizerDelegate> target; } - (id) initWithMidPoint: (CGPoint) midPoint innerRadius: (CGFloat) innerRadius outerRadius: (CGFloat) outerRadius target: (id) target; - (void)reset; - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event; - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event; - (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event; - (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event; @end #include <math.h> #import "OneFingerRotationGestureRecognizer.h" @implementation OneFingerRotationGestureRecognizer // private helper functions CGFloat distanceBetweenPoints(CGPoint point1, CGPoint point2); CGFloat angleBetweenLinesInDegrees(CGPoint beginLineA, CGPoint endLineA, CGPoint beginLineB, CGPoint endLineB); - (id) initWithMidPoint: (CGPoint) _midPoint innerRadius: (CGFloat) _innerRadius outerRadius: (CGFloat) _outerRadius target: (id <OneFingerRotationGestureRecognizerDelegate>) _target { if ((self = [super initWithTarget: _target action: nil])) { midPoint = _midPoint; innerRadius = _innerRadius; outerRadius = _outerRadius; target = _target; } return self; } /** Calculates the distance between point1 and point 2. */ CGFloat distanceBetweenPoints(CGPoint point1, CGPoint point2) { CGFloat dx = point1.x - point2.x; CGFloat dy = point1.y - point2.y; return sqrt(dx*dx + dy*dy); } CGFloat angleBetweenLinesInDegrees(CGPoint beginLineA, CGPoint endLineA, CGPoint beginLineB, CGPoint endLineB) { CGFloat a = endLineA.x - beginLineA.x; CGFloat b = endLineA.y - beginLineA.y; CGFloat c = endLineB.x - beginLineB.x; CGFloat d = endLineB.y - beginLineB.y; CGFloat atanA = atan2(a, b); CGFloat atanB = atan2(c, d); // convert radiants to degrees return (atanA - atanB) * 180 / M_PI; } #pragma mark - UIGestureRecognizer implementation - (void)reset { [super reset]; cumulatedAngle = 0; } - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesBegan:touches withEvent:event]; if ([touches count] != 1) { self.state = UIGestureRecognizerStateFailed; return; } } - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesMoved:touches withEvent:event]; if (self.state == UIGestureRecognizerStateFailed) return; CGPoint nowPoint = [[touches anyObject] locationInView: self.view]; CGPoint prevPoint = [[touches anyObject] previousLocationInView: self.view]; // make sure the new point is within the area CGFloat distance = distanceBetweenPoints(midPoint, nowPoint); if ( innerRadius <= distance && distance <= outerRadius) { // calculate rotation angle between two points CGFloat angle = angleBetweenLinesInDegrees(midPoint, prevPoint, midPoint, nowPoint); // fix value, if the 12 o'clock position is between prevPoint and nowPoint if (angle > 180) { angle -= 360; } else if (angle < -180) { angle += 360; } // sum up single steps cumulatedAngle += angle; // call delegate if ([target respondsToSelector: @selector(rotation:)]) { [target rotation:angle]; } } else { // finger moved outside the area self.state = UIGestureRecognizerStateFailed; } } - (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesEnded:touches withEvent:event]; if (self.state == UIGestureRecognizerStatePossible) { self.state = UIGestureRecognizerStateRecognized; if ([target respondsToSelector: @selector(finalAngle:)]) { [target finalAngle:cumulatedAngle]; } } else { self.state = UIGestureRecognizerStateFailed; } cumulatedAngle = 0; } - (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event { [super touchesCancelled:touches withEvent:event]; self.state = UIGestureRecognizerStateFailed; cumulatedAngle = 0; } @end Header file for view controller: #import "OneFingerRotationGestureRecognizer.h" @interface OneFingerRotationGestureViewController : UIViewController <OneFingerRotationGestureRecognizerDelegate> @property (nonatomic, strong) IBOutlet UIImageView *image; @property (nonatomic, strong) IBOutlet UITextField *textDisplay; @end then this is in the .m file: gestureRecognizer = [[OneFingerRotationGestureRecognizer alloc] initWithMidPoint: midPoint innerRadius: outRadius / 3 outerRadius: outRadius target: self]; [self.view addGestureRecognizer: gestureRecognizer]; Now my question is, is it possible to add this custom gesture into the cocos2d project found on that github, and if so, what do I need to change in the OneFingerRotationGestureRecognizerDelegate to get it to work within cocos2d. Because at the minute it is setup in a standard iOS project and not a cocos2d project and I do not know enough about UIViews and classing/ sub classing in obj-c to get this to work. Also it seems to inherit from a UIView where cocos2d uses CCLayer. Kind regards, Lewis. I also realise I may have not included enough code from the custom gesture project for readers to interpret it fully, so the full project can be found here: https://github.com/melle/OneFingerRotationGestureDemo

Read the article

.NET Security Part 4

- by Simon Cooper

Finally, in this series, I am going to cover some of the security issues that can trip you up when using sandboxed appdomains. DISCLAIMER: I am not a security expert, and this is by no means an exhaustive list. If you actually are writing security-critical code, then get a proper security audit of your code by a professional. The examples below are just illustrations of the sort of things that can go wrong. 1. AppDomainSetup.ApplicationBase The most obvious one is the issue covered in the MSDN documentation on creating a sandbox, in step 3 – the sandboxed appdomain has the same ApplicationBase as the controlling appdomain. So let’s explore what happens when they are the same, and an exception is thrown. In the sandboxed assembly, Sandboxed.dll (IPlugin is an interface in a partially-trusted assembly, with a single MethodToDoThings on it): public class UntrustedPlugin : MarshalByRefObject, IPlugin { // implements IPlugin.MethodToDoThings() public void MethodToDoThings() { throw new EvilException(); } } [Serializable] internal class EvilException : Exception { public override string ToString() { // show we have read access to C:\Windows // read the first 5 directories Console.WriteLine("Pwned! Mwuahahah!"); foreach (var d in Directory.EnumerateDirectories(@"C:\Windows").Take(5)) { Console.WriteLine(d.FullName); } return base.ToString(); } } And in the controlling assembly: // what can possibly go wrong? AppDomainSetup appDomainSetup = new AppDomainSetup { ApplicationBase = AppDomain.CurrentDomain.SetupInformation.ApplicationBase } // only grant permissions to execute // and to read the application base, nothing else PermissionSet restrictedPerms = new PermissionSet(PermissionState.None); restrictedPerms.AddPermission( new SecurityPermission(SecurityPermissionFlag.Execution)); restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.Read, appDomainSetup.ApplicationBase); restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.pathDiscovery, appDomainSetup.ApplicationBase); // create the sandbox AppDomain sandbox = AppDomain.CreateDomain("Sandbox", null, appDomainSetup, restrictedPerms); // execute UntrustedPlugin in the sandbox // don't crash the application if the sandbox throws an exception IPlugin o = (IPlugin)sandbox.CreateInstanceFromAndUnwrap("Sandboxed.dll", "UntrustedPlugin"); try { o.MethodToDoThings() } catch (Exception e) { Console.WriteLine(e.ToString()); } And the result? Oops. We’ve allowed a class that should be sandboxed to execute code with fully-trusted permissions! How did this happen? Well, the key is the exact meaning of the ApplicationBase property: The application base directory is where the assembly manager begins probing for assemblies. When EvilException is thrown, it propagates from the sandboxed appdomain into the controlling assembly’s appdomain (as it’s marked as Serializable). When the exception is deserialized, the CLR finds and loads the sandboxed dll into the fully-trusted appdomain. Since the controlling appdomain’s ApplicationBase directory contains the sandboxed assembly, the CLR finds and loads the assembly into a full-trust appdomain, and the evil code is executed. So the problem isn’t exactly that the sandboxed appdomain’s ApplicationBase is the same as the controlling appdomain’s, it’s that the sandboxed dll was in such a place that the controlling appdomain could find it as part of the standard assembly resolution mechanism. The sandbox then forced the assembly to load in the controlling appdomain by throwing a serializable exception that propagated outside the sandbox. The easiest fix for this is to keep the sandbox ApplicationBase well away from the ApplicationBase of the controlling appdomain, and don’t allow the sandbox permissions to access the controlling appdomain’s ApplicationBase directory. If you do this, then the sandboxed assembly can’t be accidentally loaded into the fully-trusted appdomain, and the code can’t be executed. If the plugin does try to induce the controlling appdomain to load an assembly it shouldn’t, a SerializationException will be thrown when it tries to load the assembly to deserialize the exception, and no damage will be done. 2. Loading the sandboxed dll into the application appdomain As an extension of the previous point, you shouldn’t directly reference types or methods in the sandboxed dll from your application code. That loads the assembly into the fully-trusted appdomain, and from there code in the assembly could be executed. Instead, pull out methods you want the sandboxed dll to have into an interface or class in a partially-trusted assembly you control, and execute methods via that instead (similar to the example above with the IPlugin interface). If you need to have a look at the assembly before executing it in the sandbox, either examine the assembly using reflection from within the sandbox, or load the assembly into the Reflection-only context in the application’s appdomain. The code in assemblies in the reflection-only context can’t be executed, it can only be reflected upon, thus protecting your appdomain from malicious code. 3. Incorrectly asserting permissions You should only assert permissions when you are absolutely sure they’re safe. For example, this method allows a caller read-access to any file they call this method with, including your documents, any network shares, the C:\Windows directory, etc: [SecuritySafeCritical] public static string GetFileText(string filePath) { new FileIOPermission(FileIOPermissionAccess.Read, filePath).Assert(); return File.ReadAllText(filePath); } Be careful when asserting permissions, and ensure you’re not providing a loophole sandboxed dlls can use to gain access to things they shouldn’t be able to. Conclusion Hopefully, that’s given you an idea of some of the ways it’s possible to get past the .NET security system. As I said before, this post is not exhaustive, and you certainly shouldn’t base any security-critical applications on the contents of this blog post. What this series should help with is understanding the possibilities of the security system, and what all the security attributes and classes mean and what they are used for, if you were to use the security system in the future.

Read the article

WebSocket API 1.1 released!

- by Pavel Bucek

Its my please to announce that JSR 356 – Java API for WebSocket maintenance release ballot vote finished with majority of “yes” votes (actually, only one eligible voter did not vote, all other votes were “yeses”). New release is maintenance release and it addresses only one issue: WEBSOCKET_SPEC-226. What changed in the 1.1? Version 1.1 is fully backwards compatible with version 1.0, there are only two methods added to javax.websocket.Session: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * @param clazz type of the message processed by message handler to be registered. * @param handler whole message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native * websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Whole<T> handler); /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * * @param clazz type of the message processed by message handler to be registered. * @param handler partial message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native * websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Partial<T> handler); Why do we need to add those methods? Short and not precise version: to support Lambda expressions as MessageHandlers. Longer and slightly more precise explanation: old Session#addMessageHandler method (which is still there and works as it worked till now) does rely on getting the generic parameter during the runtime, which is not (always) possible. The unfortunate part is that it works for some common cases and the expert group did not catch this issue before 1.0 release because of that. The issue is really clearly visible when Lambdas are used as message handlers: 1 2 3 session.addMessageHandler(message -> { System.out.println("### Received: " + message); }); There is no way for the JSR 356 implementation to get the type of the used Lambda expression, thus this call will always result in an exception. Since all modern IDEs do recommend to use Lambda expressions when possible and MessageHandler interfaces are single method interfaces, it basically just scream “use Lambdas” all over the place but when you do that, the application will fail during runtime. Only solution we currently have is to explicitly provide the type of registered MessageHandler. (There might be another sometime in the future when generic type reification is introduced, but that is not going to happen soon enough). So the example above will then be: 1 2 3 session.addMessageHandler(String.class, message -> { System.out.println("### Received: " + message); }); and voila, it works. There are some limitations – you cannot do 1 List<String>.class , so you will need to encapsulate these types when you want to use them in MessageHandler implementation (something like “class MyType extends ArrayList<String>”). There is no better way how to solve this issue, because Java currently does not provide good way how to describe generic types. The api itself is available on maven central, look for javax.websocket:javax.websocket-api:1.1. The reference implementation is project Tyrus, which implements WebSocket API 1.1 from version 1.8.

Read the article

Rebuilding CoasterBuzz, Part IV: Dependency injection, it's what's for breakfast

- by Jeff

(Repost from my personal blog.) This is another post in a series about rebuilding one of my Web sites, which has been around for 12 years. I hope to relaunch soon. More: Part I: Evolution, and death to WCF Part II: Hot data objects Part III: The architecture using the "Web stack of love" If anything generally good for the craft has come out of the rise of ASP.NET MVC, it's that people are more likely to use dependency injection, and loosely couple the pieces parts of their applications. A lot of the emphasis on coding this way has been to facilitate unit testing, and that's awesome. Unit testing makes me feel a lot less like a hack, and a lot more confident in what I'm doing. Dependency injection is pretty straight forward. It says, "Given an instance of this class, I need instances of other classes, defined not by their concrete implementations, but their interfaces." Probably the first place a developer exercises this in when having a class talk to some kind of data repository. For a very simple example, pretend the FooService has to get some Foo. It looks like this: public class FooService { public FooService(IFooRepository fooRepo) { _fooRepo = fooRepo; } private readonly IFooRepository _fooRepo; public Foo GetMeFoo() { return _fooRepo.FooFromDatabase(); } } When we need the FooService, we ask the dependency container to get it for us. It says, "You'll need an IFooRepository in that, so let me see what that's mapped to, and put it in there for you." Why is this good for you? It's good because your FooService doesn't know or care about how you get some foo. You can stub out what the methods and properties on a fake IFooRepository might return, and test just the FooService. I don't want to get too far into unit testing, but it's the most commonly cited reason to use DI containers in MVC. What I wanted to mention is how there's another benefit in a project like mine, where I have to glue together a bunch of stuff. For example, when I have someone sign up for a new account on CoasterBuzz, I'm actually using POP Forums' new account mailer, which composes a bunch of text that includes a link to verify your account. The thing is, I want to use custom text and some other logic that's specific to CoasterBuzz. To accomplish this, I make a new class that inherits from the forum's NewAccountMailer, and override some stuff. Easy enough. Then I use Ninject, the DI container I'm using, to unbind the forum's implementation, and substitute my own. Ninject uses something called a NinjectModule to bind interfaces to concrete implementations. The forum has its own module, and then the CoasterBuzz module is loaded second. The CB module has two lines of code to swap out the mailer implementation: Unbind<PopForums.Email.INewAccountMailer>(); Bind<PopForums.Email.INewAccountMailer>().To<CbNewAccountMailer>(); Piece of cake! Now, when code asks the DI container for an INewAccountMailer, it gets my custom implementation instead. This is a lot easier to deal with than some of the alternatives. I could do some copy-paste, but then I'm not using well-tested code from the forum. I could write stuff from scratch, but then I'm throwing away a bunch of logic I've already written (in this case, stuff around e-mail, e-mail settings, mail delivery failures). There are other places where the DI container comes in handy. For example, CoasterBuzz does a number of custom things with user profiles, and special content for paid members. It uses the forum as the core piece to managing users, so I can ask the container to get me instances of classes that do user lookups, for example, and have zero care about how the forum handles database calls, configuration, etc. What a great world to live in, compared to ten years ago. Sure, the primary interest in DI is around the "separation of concerns" and facilitating unit testing, but as your library grows and you use more open source, it starts to be the glue that pulls everything together.

Read the article

Business Case for investing time developing Stubs and BizUnit Tests

- by charlie.mott

I was recently in a position where I had to justify why effort should be spent developing Stubbed Integration Tests for BizTalk solutions. These tests are usually developed using the BizUnit framework. I assumed that most seasoned BizTalk developers would consider this best practice. Even though Microsoft suggest use of BizUnit on MSDN, I've not found a single site listing the justifications for investing time writing stubs and BizUnit tests. Stubs Stubs should be developed to isolate your development team from external dependencies. This is described by Michael Stephenson here. Failing to do this can result in the following problems: In contract-first scenarios, the external system interface will have been defined. But the interface may not have been setup or even developed yet for the BizTalk developers to work with. By the time you open the target location to see the data BizTalk has sent, it may have been swept away. If you are relying on the UI of the target system to see the data BizTalk has sent, what do you do if it fails to arrive? It may take time for the data to be processed or it may be scheduled to be processed later. Learning how to use the source\target systems and investigations into where things go wrong in these systems will slow down the BizTalk development effort. By the time the data is visible in a UI it may have undergone further transformations. In larger development teams working together, do you all use the same source and target instances. How do you know which data was created by whose tests? How do you know which event log error message are whose? Another developer may have “cleaned up” your data. It is harder to write BizUnit tests that clean up the data\logs after each test run. What if your B2B partners' source or target system cannot support the sort of testing you want to do. They may not even have a development or test instance that you can work with. Their single test instance may be used by the SIT\UAT teams. There may be licencing costs of setting up an instances of the external system. The stubs I like to use are generic stubs that can accept\return any message type. Usually I need to create one per protocol. They should be driven by BizUnit steps to: validates the data received; and select a response messages (or error response). Once built, they can be re-used for many integration tests and from project to project. I’m not saying that developers should never test against a real instance. Every so often, you still need to connect to real developer or test instances of the source and target endpoints\services. The interface developers may ask you to send them some data to see if everything still works. Or you might want some messages sent to BizTalk to get confidence that everything still works beyond BizTalk. Tests Automated “Stubbed Integration Tests” are usually built using the BizUnit framework. These facilitate testing of the entire integration process from source stub to target stub. It will ensure that all of the BizTalk components are configured together correctly to meet all the requirements. More fine grained unit testing of individual BizTalk components is still encouraged. But BizUnit provides much the easiest way to test some components types (e.g. Orchestrations). Using BizUnit with the Behaviour Driven Development approach described by Mike Stephenson delivers the following benefits: source: http://biztalkbddsample.codeplex.com – Video 1. Requirements can be easily defined using Given/When/Then Requirements are close to the code so easier to manage as features and scenarios Requirements are defined in domain language The feature files can be used as part of the documentation The documentation is accurate to the build of code and can be published with a release The scenarios are effective to document the scenarios and are not over excessive The scenarios are maintained with the code There’s an abstraction between the intention and implementation of tests making them easier to understand The requirements drive the testing These same tests can also be used to drive load testing as described here. If you don't do this ... If you don't follow the above “Stubbed Integration Tests” approach, the developer will need to manually trigger the tests. This has the following risks: Developers are unlikely to check all the scenarios each time and all the expected conditions each time. After the developer leaves, these manual test steps may be lost. What test scenarios are there? What test messages did they use for each scenario? There is no mechanism to prove adequate test coverage. A test team may attempt to automate integration test scenarios in a test environment through the triggering of tests from a source system UI. If this is a replacement for BizUnit tests, then this carries the following risks: It moves the tests downstream, so problems will be found later in the process. Testers may not check all the expected conditions within the BizTalk infrastructure such as: event logs, suspended messages, etc. These automated tests may also get in the way of manual tests run on these environments.

Read the article

UIView with IrrlichtScene - iOS

- by user1459024

i have a UIViewController in a Storyboard and want to draw a IrrlichtScene in this View Controller. My Code: WWSViewController.h #import <UIKit/UIKit.h> @interface WWSViewController : UIViewController { IBOutlet UILabel *errorLabel; } @end WWSViewController.mm #import "WWSViewController.h" #include "../../ressources/irrlicht/include/irrlicht.h" using namespace irr; using namespace core; using namespace scene; using namespace video; using namespace io; using namespace gui; @interface WWSViewController () @end @implementation WWSViewController -(void)awakeFromNib { errorLabel = [[UILabel alloc] init]; errorLabel.text = @""; IrrlichtDevice *device = createDevice( video::EDT_OGLES1, dimension2d<u32>(640, 480), 16, false, false, false, 0); /* Set the caption of the window to some nice text. Note that there is an 'L' in front of the string. The Irrlicht Engine uses wide character strings when displaying text. */ device->setWindowCaption(L"Hello World! - Irrlicht Engine Demo"); /* Get a pointer to the VideoDriver, the SceneManager and the graphical user interface environment, so that we do not always have to write device->getVideoDriver(), device->getSceneManager(), or device->getGUIEnvironment(). */ IVideoDriver* driver = device->getVideoDriver(); ISceneManager* smgr = device->getSceneManager(); IGUIEnvironment* guienv = device->getGUIEnvironment(); /* We add a hello world label to the window, using the GUI environment. The text is placed at the position (10,10) as top left corner and (260,22) as lower right corner. */ guienv->addStaticText(L"Hello World! This is the Irrlicht Software renderer!", rect<s32>(10,10,260,22), true); /* To show something interesting, we load a Quake 2 model and display it. We only have to get the Mesh from the Scene Manager with getMesh() and add a SceneNode to display the mesh with addAnimatedMeshSceneNode(). We check the return value of getMesh() to become aware of loading problems and other errors. Instead of writing the filename sydney.md2, it would also be possible to load a Maya object file (.obj), a complete Quake3 map (.bsp) or any other supported file format. By the way, that cool Quake 2 model called sydney was modelled by Brian Collins. */ IAnimatedMesh* mesh = smgr->getMesh("/Users/dbocksteger/Desktop/test/media/sydney.md2"); if (!mesh) { device->drop(); if (!errorLabel) { errorLabel = [[UILabel alloc] init]; } errorLabel.text = @"Konnte Mesh nicht laden."; return; } IAnimatedMeshSceneNode* node = smgr->addAnimatedMeshSceneNode( mesh ); /* To let the mesh look a little bit nicer, we change its material. We disable lighting because we do not have a dynamic light in here, and the mesh would be totally black otherwise. Then we set the frame loop, such that the predefined STAND animation is used. And last, we apply a texture to the mesh. Without it the mesh would be drawn using only a color. */ if (node) { node->setMaterialFlag(EMF_LIGHTING, false); node->setMD2Animation(scene::EMAT_STAND); node->setMaterialTexture( 0, driver->getTexture("/Users/dbocksteger/Desktop/test/media/sydney.bmp") ); } /* To look at the mesh, we place a camera into 3d space at the position (0, 30, -40). The camera looks from there to (0,5,0), which is approximately the place where our md2 model is. */ smgr->addCameraSceneNode(0, vector3df(0,30,-40), vector3df(0,5,0)); /* Ok, now we have set up the scene, lets draw everything: We run the device in a while() loop, until the device does not want to run any more. This would be when the user closes the window or presses ALT+F4 (or whatever keycode closes a window). */ while(device->run()) { /* Anything can be drawn between a beginScene() and an endScene() call. The beginScene() call clears the screen with a color and the depth buffer, if desired. Then we let the Scene Manager and the GUI Environment draw their content. With the endScene() call everything is presented on the screen. */ driver->beginScene(true, true, SColor(255,100,101,140)); smgr->drawAll(); guienv->drawAll(); driver->endScene(); } /* After we are done with the render loop, we have to delete the Irrlicht Device created before with createDevice(). In the Irrlicht Engine, you have to delete all objects you created with a method or function which starts with 'create'. The object is simply deleted by calling ->drop(). See the documentation at irr::IReferenceCounted::drop() for more information. */ device->drop(); } - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. } - (void)viewDidUnload { [super viewDidUnload]; // Release any retained subviews of the main view. } - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return (interfaceOrientation != UIInterfaceOrientationPortraitUpsideDown); } @end Sadly the result is just a black View in the Simulator. :( Hope here is anyone who can explain me how i draw the scene in a UIView. Furthermore I'm getting this Error: Could not load sprite bank because the file does not exist: #DefaultFont How can i fix it ?

Read the article

Lessons learnt in implementing Scrum in a Large Organization that has traditional values

- by MarkPearl

I recently had the experience of being involved in a “test” scrum implementation in a large organization that was used to a traditional project management approach. Here are some lessons that I learnt from it. Don’t let the Project Manager be the Product Owner First lesson learnt is to identify the correct product owner – in this instance the product manager assumed the role of the product owner which was a mistake. The product owner is the one who has the most to loose if the project fails. With a methodology that advocates removing the role of the project manager from the process then it is not in the interests of the person who is employed as a project manager to be the product owner – in fact they have the most to gain should the project fail. Know the time commitments of team members to the Project Second lesson learnt is to get a firm time commitment of the members on a team for the sprint and to hold them to it. In this project instance many of the issues we faced were with team members having to double up on supporting existing projects/systems and the scrum project. In many situations they just didn’t get round to doing any work on the scrum project for several days while they tried to meet other commitments. Initially this was not made transparent to the team – in stand up team members would say that had done some work but would be very vague on how much time they had actually spent using the blackhole of their other legacy projects as an excuse – putting up a time burn down chart made time allocations transparent and easy to hold the team to. In addition, how can you plan for a sprint without knowing the actual time available of the members – when I mean actual time, the exercise of getting them to go through all their appointments and lunch times and breaks and removing them from their time commitment helps get you to a realistic time that they can dedicate. Make sure you meet your minimum team sizes In a recent post I wrote about the difference between a partnership and a team. If you are going to do scrum in a large organization make sure you have a minimum team size of at least 3 developers. My experience with larger organizations is that people have a tendency to be sick more, take more leave and generally not be around – if you have a team size of two it is so easy to loose momentum on the project – the more people you have in the team (up to about 9) the more the momentum the project will have when people are not around. Swapping from one methodology to another can seem as waste to the customer It sounds bad, but most customers don’t care what methodology you use. Often they have bought into the “big plan upfront”. If you can, avoid taking a project on midstream from a traditional approach unless the customer has not bought into the process – with this particular project they had a detailed upfront planning breakaway with the customer using the traditional approach and then before the project started we moved onto a scrum implementation – this seemed as waste to the customer. We should have managed the customers expectation properly. Don’t play the role of the scrum master if you can’t be the scrum master With this particular implementation I was the “scrum master”. But all I did was go through the process of the formal meetings of scrum – I attended stand up, retrospectives and planning – but I was not hands on the ground. I was not performing the most important role of removing blockages – and by the end of the project there were a number of blockages “cropping up”. What could have been a better approach was to take someone on the team and train them to be the scrum master and be present to coach them. Alternatively actually be on the team on a fulltime basis and be the scrum master. By just going through the meetings of scrum didn’t mean we were doing scrum. So we failed with this one, if you fail look at it from an agile perspective As this particular project drew to a close and it became more and more apparent that it was not going to succeed the failure of it became depressing. Emotions were expressed by various people on the team that we not encouraging and enforced the failure. Embracing the failure and looking at it for what it is instead of taking it as the end of the world can change how you grow from the experience. Acknowledging that it failed and then focussing on learning from why and how to avoid the failure in the future can change how you feel emotionally about the team, the project and the organization.

Read the article

Concurrency Utilities for Java EE Early Draft (JSR 236)

- by arungupta

Concurrency Utilities for Java EE is being worked as JSR 236 and has released an Early Draft. It provides concurrency capabilities to Java EE application components without compromising container integrity. Simple (common) and advanced concurrency patterns are easily supported without sacrificing usability. Using Java SE concurrency utilities such as java.util.concurrent API, java.lang.Thread and java.util.Timer in a Java EE application component such as EJB or Servlet are problematic since the container and server have no knowledge of these resources. JSR 236 enables concurrency largely by extending the Concurrency Utilities API developed under JSR-166. This also allows a consistency between Java SE and Java EE concurrency programming model. There are four main programming interfaces available: ManagedExecutorService ManagedScheduledExecutorService ContextService ManagedThreadFactory ManagedExecutorService is a managed version of java.util.concurrent.ExecutorService. The implementations of this interface are provided by the container and accessible using JNDI reference: <resource-env-ref> <resource-env-ref-name> concurrent/BatchExecutor </resource-env-ref-name> <resource-env-ref-type> javax.enterprise.concurrent.ManagedExecutorService </resource-env-ref-type><resource-env-ref> and available as: @Resource(name="concurrent/BatchExecutor")ManagedExecutorService executor; Its recommended to bind the JNDI references in the java:comp/env/concurrent subcontext. The asynchronous tasks that need to be executed need to implement java.lang.Runnable or java.util.concurrent.Callable interface as: public class MyTask implements Runnable { public void run() { // business logic goes here }} OR public class MyTask2 implements Callable<Date> { public Date call() { // business logic goes here }} The task is then submitted to the executor using one of the submit method that return a Future instance. The Future represents the result of the task and can also be used to check if the task is complete or wait for its completion. Future<String> future = executor.submit(new MyTask(), String.class);. . .String result = future.get(); Another example to submit tasks is: class MyTask implements Callback<Long> { . . . }class MyTask2 implements Callback<Date> { . . . }ArrayList<Callable> tasks = new ArrayList<();tasks.add(new MyTask());tasks.add(new MyTask2());List<Future<Object>> result = executor.invokeAll(tasks); The ManagedExecutorService may be configured for different properties such as: Hung Task Threshold: Time in milliseconds that a task can execute before it is considered hung Pool Info Core Size: Number of threads to keep alive Maximum Size: Maximum number of threads allowed in the pool Keep Alive: Time to allow threads to remain idle when # of threads > Core Size Work Queue Capacity: # of tasks that can be stored in inbound buffer Thread Use: Application intend to run short vs long-running tasks, accordingly pooled or daemon threads are picked ManagedScheduledExecutorService adds delay and periodic task running capabilities to ManagedExecutorService. The implementations of this interface are provided by the container and accessible using JNDI reference: <resource-env-ref> <resource-env-ref-name> concurrent/BatchExecutor </resource-env-ref-name> <resource-env-ref-type> javax.enterprise.concurrent.ManagedExecutorService </resource-env-ref-type><resource-env-ref> and available as: @Resource(name="concurrent/timedExecutor")ManagedExecutorService executor; And then the tasks are submitted using submit, invokeXXX or scheduleXXX methods. ScheduledFuture<?> future = executor.schedule(new MyTask(), 5, TimeUnit.SECONDS); This will create and execute a one-shot action that becomes enabled after 5 seconds of delay. More control is possible using one of the newly added methods: MyTaskListener implements ManagedTaskListener { public void taskStarting(...) { . . . } public void taskSubmitted(...) { . . . } public void taskDone(...) { . . . } public void taskAborted(...) { . . . } }ScheduledFuture<?> future = executor.schedule(new MyTask(), 5, TimeUnit.SECONDS, new MyTaskListener()); Here, ManagedTaskListener is used to monitor the state of a task's future. ManagedThreadFactory provides a method for creating threads for execution in a managed environment. A simple usage is: @Resource(name="concurrent/myThreadFactory")ManagedThreadFactory factory;. . .Thread thread = factory.newThread(new Runnable() { . . . }); concurrent/myThreadFactory is a JNDI resource. There is lot of interesting content in the Early Draft, download it, and read yourself. The implementation will be made available soon and also be integrated in GlassFish 4 as well. Some references for further exploring ... Javadoc Early Draft Specification concurrency-ee-spec.java.net [email protected]

Read the article

unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

- by jon

I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

Read the article

PC hangs and reboots from time to time

- by Bevor

Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

Read the article

IPsec tunnel to Android device not created even though there is an IKE SA

- by Quentin Swain

I'm trying to configure a VPN tunnel between an Android device running 4.1 and a Fedora 17 Linux box running strongSwan 5.0. The device reports that it is connected and strongSwan statusall returns that there is an IKE SA, but doesn't display a tunnel. I used the instructions for iOS in the wiki to generate certificates and configure strongSwan. Since Android uses a modified version of racoon this should work and since the connection is partly established I think I am on the right track. I don't see any errors about not being able to create the tunnel. This is the configuration for the strongSwan connection conn android2 keyexchange=ikev1 authby=xauthrsasig xauth=server left=96.244.142.28 leftsubnet=0.0.0.0/0 leftfirewall=yes leftcert=serverCert.pem right=%any rightsubnet=10.0.0.0/24 rightsourceip=10.0.0.2 rightcert=clientCert.pem ike=aes256-sha1-modp1024 auto=add This is the output of strongswan statusall Status of IKE charon daemon (strongSwan 5.0.0, Linux 3.3.4-5.fc17.x86_64, x86_64): uptime: 20 minutes, since Oct 31 10:27:31 2012 malloc: sbrk 270336, mmap 0, used 198144, free 72192 worker threads: 8 of 16 idle, 7/1/0/0 working, job queue: 0/0/0/0, scheduled: 7 loaded plugins: charon aes des sha1 sha2 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp dnskey pem openssl fips-prf gmp xcbc cmac hmac attr kernel-netlink resolve socket-default stroke updown xauth-generic Virtual IP pools (size/online/offline): android-hybrid: 1/0/0 android2: 1/1/0 Listening IP addresses: 96.244.142.28 Connections: android-hybrid: %any...%any IKEv1 android-hybrid: local: [C=CH, O=strongSwan, CN=vpn.strongswan.org] uses public key authentication android-hybrid: cert: "C=CH, O=strongSwan, CN=vpn.strongswan.org" android-hybrid: remote: [%any] uses XAuth authentication: any android-hybrid: child: dynamic === dynamic TUNNEL android2: 96.244.142.28...%any IKEv1 android2: local: [C=CH, O=strongSwan, CN=vpn.strongswan.org] uses public key authentication android2: cert: "C=CH, O=strongSwan, CN=vpn.strongswan.org" android2: remote: [C=CH, O=strongSwan, CN=client] uses public key authentication android2: cert: "C=CH, O=strongSwan, CN=client" android2: remote: [%any] uses XAuth authentication: any android2: child: 0.0.0.0/0 === 10.0.0.0/24 TUNNEL Security Associations (1 up, 0 connecting): android2[3]: ESTABLISHED 10 seconds ago, 96.244.142.28[C=CH, O=strongSwan, CN=vpn.strongswan.org]...208.54.35.241[C=CH, O=strongSwan, CN=client] android2[3]: Remote XAuth identity: android android2[3]: IKEv1 SPIs: 4151e371ad46b20d_i 59a56390d74792d2_r*, public key reauthentication in 56 minutes android2[3]: IKE proposal: AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 The output of ip -s xfrm policy src ::/0 dst ::/0 uid 0 socket in action allow index 3851 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket out action allow index 3844 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket in action allow index 3835 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket out action allow index 3828 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket in action allow index 3819 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:39 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket out action allow index 3812 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:22 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket in action allow index 3803 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:20 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket out action allow index 3796 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:20 So a xfrm policy isn't being created for the connection, even though there is an SA between device and strongswan. Executing ip -s xfrm policy on the android device results in the following output: src 0.0.0.0/0 dst 10.0.0.2/32 uid 0 dir in action allow index 40 priority 2147483648 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:08 use - tmpl src 96.244.142.28 dst 25.239.33.30 proto esp spi 0x00000000(0) reqid 0(0x00000000) mode tunnel level required share any enc-mask 00000000 auth-mask 00000000 comp-mask 00000000 src 10.0.0.2/32 dst 0.0.0.0/0 uid 0 dir out action allow index 33 priority 2147483648 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:08 use - tmpl src 25.239.33.30 dst 96.244.142.28 proto esp spi 0x00000000(0) reqid 0(0x00000000) mode tunnel level required share any enc-mask 00000000 auth-mask 00000000 comp-mask 00000000 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 4 action allow index 28 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:08 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 3 action allow index 19 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:08 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 4 action allow index 12 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:06 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 3 action allow index 3 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:07 Logs from charon: 00[DMN] Starting IKE charon daemon (strongSwan 5.0.0, Linux 3.3.4-5.fc17.x86_64, x86_64) 00[KNL] listening on interfaces: 00[KNL] em1 00[KNL] 96.244.142.28 00[KNL] fe80::224:e8ff:fed2:18b2 00[CFG] loading ca certificates from '/etc/strongswan/ipsec.d/cacerts' 00[CFG] loaded ca certificate "C=CH, O=strongSwan, CN=strongSwan CA" from '/etc/strongswan/ipsec.d/cacerts/caCert.pem' 00[CFG] loading aa certificates from '/etc/strongswan/ipsec.d/aacerts' 00[CFG] loading ocsp signer certificates from '/etc/strongswan/ipsec.d/ocspcerts' 00[CFG] loading attribute certificates from '/etc/strongswan/ipsec.d/acerts' 00[CFG] loading crls from '/etc/strongswan/ipsec.d/crls' 00[CFG] loading secrets from '/etc/strongswan/ipsec.secrets' 00[CFG] loaded RSA private key from '/etc/strongswan/ipsec.d/private/clientKey.pem' 00[CFG] loaded IKE secret for %any 00[CFG] loaded EAP secret for android 00[CFG] loaded EAP secret for android 00[DMN] loaded plugins: charon aes des sha1 sha2 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp dnskey pem openssl fips-prf gmp xcbc cmac hmac attr kernel-netlink resolve socket-default stroke updown xauth-generic 08[NET] waiting for data on sockets 16[LIB] created thread 16 [15338] 16[JOB] started worker thread 16 11[CFG] received stroke: add connection 'android-hybrid' 11[CFG] conn android-hybrid 11[CFG] left=%any 11[CFG] leftsubnet=(null) 11[CFG] leftsourceip=(null) 11[CFG] leftauth=pubkey 11[CFG] leftauth2=(null) 11[CFG] leftid=(null) 11[CFG] leftid2=(null) 11[CFG] leftrsakey=(null) 11[CFG] leftcert=serverCert.pem 11[CFG] leftcert2=(null) 11[CFG] leftca=(null) 11[CFG] leftca2=(null) 11[CFG] leftgroups=(null) 11[CFG] leftupdown=ipsec _updown iptables 11[CFG] right=%any 11[CFG] rightsubnet=(null) 11[CFG] rightsourceip=96.244.142.3 11[CFG] rightauth=xauth 11[CFG] rightauth2=(null) 11[CFG] rightid=%any 11[CFG] rightid2=(null) 11[CFG] rightrsakey=(null) 11[CFG] rightcert=(null) 11[CFG] rightcert2=(null) 11[CFG] rightca=(null) 11[CFG] rightca2=(null) 11[CFG] rightgroups=(null) 11[CFG] rightupdown=(null) 11[CFG] eap_identity=(null) 11[CFG] aaa_identity=(null) 11[CFG] xauth_identity=(null) 11[CFG] ike=aes256-sha1-modp1024 11[CFG] esp=aes128-sha1-modp2048,3des-sha1-modp1536 11[CFG] dpddelay=30 11[CFG] dpdtimeout=150 11[CFG] dpdaction=0 11[CFG] closeaction=0 11[CFG] mediation=no 11[CFG] mediated_by=(null) 11[CFG] me_peerid=(null) 11[CFG] keyexchange=ikev1 11[KNL] getting interface name for %any 11[KNL] %any is not a local address 11[KNL] getting interface name for %any 11[KNL] %any is not a local address 11[CFG] left nor right host is our side, assuming left=local 11[CFG] loaded certificate "C=CH, O=strongSwan, CN=vpn.strongswan.org" from 'serverCert.pem' 11[CFG] id '%any' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=vpn.strongswan.org' 11[CFG] added configuration 'android-hybrid' 11[CFG] adding virtual IP address pool 'android-hybrid': 96.244.142.3/32 13[CFG] received stroke: add connection 'android2' 13[CFG] conn android2 13[CFG] left=96.244.142.28 13[CFG] leftsubnet=0.0.0.0/0 13[CFG] leftsourceip=(null) 13[CFG] leftauth=pubkey 13[CFG] leftauth2=(null) 13[CFG] leftid=(null) 13[CFG] leftid2=(null) 13[CFG] leftrsakey=(null) 13[CFG] leftcert=serverCert.pem 13[CFG] leftcert2=(null) 13[CFG] leftca=(null) 13[CFG] leftca2=(null) 13[CFG] leftgroups=(null) 13[CFG] leftupdown=ipsec _updown iptables 13[CFG] right=%any 13[CFG] rightsubnet=10.0.0.0/24 13[CFG] rightsourceip=10.0.0.2 13[CFG] rightauth=pubkey 13[CFG] rightauth2=xauth 13[CFG] rightid=(null) 13[CFG] rightid2=(null) 13[CFG] rightrsakey=(null) 13[CFG] rightcert=clientCert.pem 13[CFG] rightcert2=(null) 13[CFG] rightca=(null) 13[CFG] rightca2=(null) 13[CFG] rightgroups=(null) 13[CFG] rightupdown=(null) 13[CFG] eap_identity=(null) 13[CFG] aaa_identity=(null) 13[CFG] xauth_identity=(null) 13[CFG] ike=aes256-sha1-modp1024 13[CFG] esp=aes128-sha1-modp2048,3des-sha1-modp1536 13[CFG] dpddelay=30 13[CFG] dpdtimeout=150 13[CFG] dpdaction=0 13[CFG] closeaction=0 13[CFG] mediation=no 13[CFG] mediated_by=(null) 13[CFG] me_peerid=(null) 13[CFG] keyexchange=ikev0 13[KNL] getting interface name for %any 13[KNL] %any is not a local address 13[KNL] getting interface name for 96.244.142.28 13[KNL] 96.244.142.28 is on interface em1 13[CFG] loaded certificate "C=CH, O=strongSwan, CN=vpn.strongswan.org" from 'serverCert.pem' 13[CFG] id '96.244.142.28' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=vpn.strongswan.org' 13[CFG] loaded certificate "C=CH, O=strongSwan, CN=client" from 'clientCert.pem' 13[CFG] id '%any' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=client' 13[CFG] added configuration 'android2' 13[CFG] adding virtual IP address pool 'android2': 10.0.0.2/32 08[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 15[CFG] looking for an ike config for 96.244.142.28...208.54.35.241 15[CFG] candidate: %any...%any, prio 2 15[CFG] candidate: 96.244.142.28...%any, prio 5 15[CFG] found matching ike config: 96.244.142.28...%any with prio 5 01[JOB] next event in 29s 999ms, waiting 15[IKE] received NAT-T (RFC 3947) vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-02 vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-02\n vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-00 vendor ID 15[IKE] received XAuth vendor ID 15[IKE] received Cisco Unity vendor ID 15[IKE] received DPD vendor ID 15[IKE] 208.54.35.241 is initiating a Main Mode IKE_SA 15[IKE] IKE_SA (unnamed)[1] state change: CREATED => CONNECTING 15[CFG] selecting proposal: 15[CFG] proposal matches 15[CFG] received proposals: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_256/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:AES_CBC_128/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_128/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:3DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:3DES_CBC/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:DES_CBC/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024 15[CFG] configured proposals: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_128/AES_CBC_192/AES_CBC_256/3DES_CBC/CAMELLIA_CBC_128/CAMELLIA_CBC_192/CAMELLIA_CBC_256/HMAC_MD5_96/HMAC_SHA1_96/HMAC_SHA2_256_128/HMAC_SHA2_384_192/HMAC_SHA2_512_256/AES_XCBC_96/AES_CMAC_96/PRF_HMAC_MD5/PRF_HMAC_SHA1/PRF_HMAC_SHA2_256/PRF_HMAC_SHA2_384/PRF_HMAC_SHA2_512/PRF_AES128_XCBC/PRF_AES128_CMAC/MODP_2048/MODP_2048_224/MODP_2048_256/MODP_1536/MODP_4096/MODP_8192/MODP_1024/MODP_1024_160 15[CFG] selected proposal: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 15[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 04[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 15[MGR] checkin IKE_SA (unnamed)[1] 15[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 08[NET] waiting for data on sockets 07[MGR] checkout IKE_SA by message 07[MGR] IKE_SA (unnamed)[1] successfully checked out 07[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 07[LIB] size of DH secret exponent: 1023 bits 07[IKE] remote host is behind NAT 07[IKE] sending cert request for "C=CH, O=strongSwan, CN=strongSwan CA" 07[ENC] generating NAT_D_V1 payload finished 07[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 07[MGR] checkin IKE_SA (unnamed)[1] 07[MGR] check-in of IKE_SA successful. 04[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 10[IKE] ignoring certificate request without data 10[IKE] received end entity cert "C=CH, O=strongSwan, CN=client" 10[CFG] looking for XAuthInitRSA peer configs matching 96.244.142.28...208.54.35.241[C=CH, O=strongSwan, CN=client] 10[CFG] candidate "android-hybrid", match: 1/1/2/2 (me/other/ike/version) 10[CFG] candidate "android2", match: 1/20/5/1 (me/other/ike/version) 10[CFG] selected peer config "android2" 10[CFG] certificate "C=CH, O=strongSwan, CN=client" key: 2048 bit RSA 10[CFG] using trusted ca certificate "C=CH, O=strongSwan, CN=strongSwan CA" 10[CFG] checking certificate status of "C=CH, O=strongSwan, CN=client" 10[CFG] ocsp check skipped, no ocsp found 10[CFG] certificate status is not available 10[CFG] certificate "C=CH, O=strongSwan, CN=strongSwan CA" key: 2048 bit RSA 10[CFG] reached self-signed root ca with a path length of 0 10[CFG] using trusted certificate "C=CH, O=strongSwan, CN=client" 10[IKE] authentication of 'C=CH, O=strongSwan, CN=client' with RSA successful 10[ENC] added payload of type ID_V1 to message 10[ENC] added payload of type SIGNATURE_V1 to message 10[IKE] authentication of 'C=CH, O=strongSwan, CN=vpn.strongswan.org' (myself) successful 10[IKE] queueing XAUTH task 10[IKE] sending end entity cert "C=CH, O=strongSwan, CN=vpn.strongswan.org" 10[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 10[IKE] activating new tasks 10[IKE] activating XAUTH task 10[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 01[JOB] next event in 3s 999ms, waiting 10[MGR] checkin IKE_SA android2[1] 10[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 08[NET] waiting for data on sockets 12[MGR] checkout IKE_SA by message 12[MGR] IKE_SA android2[1] successfully checked out 12[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 12[MGR] checkin IKE_SA android2[1] 12[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 16[MGR] checkout IKE_SA by message 16[MGR] IKE_SA android2[1] successfully checked out 16[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 08[NET] waiting for data on sockets 16[IKE] XAuth authentication of 'android' successful 16[IKE] reinitiating already active tasks 16[IKE] XAUTH task 16[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 16[MGR] checkin IKE_SA android2[1] 01[JOB] next event in 3s 907ms, waiting 16[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 09[MGR] checkout IKE_SA by message 09[MGR] IKE_SA android2[1] successfully checked out 09[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] .8rS 09[IKE] IKE_SA android2[1] established between 96.244.142.28[C=CH, O=strongSwan, CN=vpn.strongswan.org]...208.54.35.241[C=CH, O=strongSwan, CN=client] 09[IKE] IKE_SA android2[1] state change: CONNECTING => ESTABLISHED 09[IKE] scheduling reauthentication in 3409s 09[IKE] maximum IKE_SA lifetime 3589s 09[IKE] activating new tasks 09[IKE] nothing to initiate 09[MGR] checkin IKE_SA android2[1] 09[MGR] check-in of IKE_SA successful. 09[MGR] checkout IKE_SA 09[MGR] IKE_SA android2[1] successfully checked out 09[MGR] checkin IKE_SA android2[1] 09[MGR] check-in of IKE_SA successful. 01[JOB] next event in 3s 854ms, waiting 08[NET] waiting for data on sockets 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 14[MGR] checkout IKE_SA by message 14[MGR] IKE_SA android2[1] successfully checked out 14[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 14[IKE] processing INTERNAL_IP4_ADDRESS attribute 14[IKE] processing INTERNAL_IP4_NETMASK attribute 14[IKE] processing INTERNAL_IP4_DNS attribute 14[IKE] processing INTERNAL_IP4_NBNS attribute 14[IKE] processing UNITY_BANNER attribute 14[IKE] processing UNITY_DEF_DOMAIN attribute 14[IKE] processing UNITY_SPLITDNS_NAME attribute 14[IKE] processing UNITY_SPLIT_INCLUDE attribute 14[IKE] processing UNITY_LOCAL_LAN attribute 14[IKE] processing APPLICATION_VERSION attribute 14[IKE] peer requested virtual IP %any 14[CFG] assigning new lease to 'android' 14[IKE] assigning virtual IP 10.0.0.2 to peer 'android' 14[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 14[MGR] checkin IKE_SA android2[1] 14[MGR] check-in of IKE_SA successful. 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 08[NET] waiting for data on sockets 01[JOB] got event, queuing job for execution 01[JOB] next event in 91ms, waiting 13[MGR] checkout IKE_SA 13[MGR] IKE_SA android2[1] successfully checked out 13[MGR] checkin IKE_SA android2[1] 13[MGR] check-in of IKE_SA successful. 01[JOB] got event, queuing job for execution 01[JOB] next event in 24s 136ms, waiting 15[MGR] checkout IKE_SA 15[MGR] IKE_SA android2[1] successfully checked out 15[MGR] checkin IKE_SA android2[1] 15[MGR] check-in of IKE_SA successful.

Read the article

Wired connection periodically disconnects requires ipconfig /release and /renew to reconnect

- by Sesame

I just got back into University and after a day of using the internet I suddenly was unable to visit other webpages even though I was still able to chat. I restarted the computer and the internet could no longer visit webpages at all. I got a DNS error from the browser (chrome) and the troubleshooter. The connection comes up as "Network 3" even though It was "Network 2" when it worked. I compared ipconfig /all logs and they seemed identical when it was and was not working. I've found two ways to get internet connection (they no longer work): run ipconfig /release and ipconfig /renew several times set a random address and have the troubleshooter fix the new found dhcp problem (before it says dns cannot fix). I checked and it said DHCP was enabled. But either step one or two usually needs to be repeated several times before the network will change back to "network 2" from the defunct "network 3" and after an hour or so I have problems again. I've tried: Uninstalling windows defender and turning off firewall (windows firewall). Updating Qualcomm Ethernet driver - it is up to date. System Restore (problem resurfaces quickly...it's possible this has something to do with windows update?) Flushing dns and setting dns myself (google one and others). Booting in safe mode with networking...didn't fix anything Reinstalling Ethernet Driver Using other ethernet cable, other wall port. I'm out of ideas. Ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : NGoller Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : Home Ethernet adapter UConnect: Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 90-2B-34-50-33-F4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : fd00::2086:628:f0a1:73c3(Preferred) Temporary IPv6 Address. . . . . . : fd00::c86b:370:b1d9:bd73(Preferred) Link-local IPv6 Address . . . . . : fe80::2086:628:f0a1:73c3%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.33(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, August 28, 2013 11:58:37 PM Lease Expires . . . . . . . . . . : Thursday, August 29, 2013 11:58:37 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.Home: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes I'm getting these errors commonly: The IP address lease 155.97.227.199 for the Network Card with network address 0x902B345033F4 has been denied by the DHCP server 10.0.1.1 (The DHCP Server sent a DHCPNACK message). Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. By the way, Operating System: Windows 7 - 64 Bit. Have downloaded latest windows updates. Update: And my two fixes don't work any more :( . This is now what happens when I try to Ipconfig /renew: C:\Users\Nikko\Desktop>ipconfig /renew Windows IP Configuration An error occurred while renewing interface Local Area Connection : The name spec ified in the network control block (NCB) is in use on a remote adapter. The NCB is the data. An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy stem cannot find the file specified. Update 2: So my internet is randomly working again today. The IP address I had before was a local one while the university address should start with 155... I didn't do anything to the settings...it's bizarre that it all of a sudden works. Thanks!

Read the article

any clue in these logs why keyboard audio and internet are messed up

- by mmj

Jun 7 00:01:18 Isis lightdm: pam_unix(lightdm-autologin:session): session opened for user mimi by (uid=0) Jun 7 00:01:18 Isis lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Jun 7 00:01:26 Isis polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.36 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale zh_CN.UTF-8) Jun 7 00:01:29 Isis dbus[610]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.44" (uid=1000 pid=1763 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.15" (uid=0 pid=1219 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 00:07:55 Isis sudo: pam_unix(sudo:auth): authentication failure; logname=mimi uid=1000 euid=0 tty=/dev/pts/1 ruser=mimi rhost= user=mimi Jun 7 00:08:11 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/add-apt-repository ppa:colingille/freshlight Jun 7 00:08:11 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 00:08:32 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 00:11:20 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/apt-get install gparted Jun 7 00:11:20 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 00:11:59 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 00:17:02 Isis CRON[2651]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 00:17:02 Isis CRON[2651]: pam_unix(cron:session): session closed for user root Jun 7 00:17:32 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain ONE-SHOT authorization for action com.ubuntu.pkexec.gparted for unix-process:2655:96838 [/bin/sh /usr/bin/gparted-pkexec] (owned by unix-user:mimi) Jun 7 00:17:32 Isis pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Jun 7 00:17:32 Isis pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Jun 7 00:17:32 Isis pkexec[2657]: mimi: Executing command [USER=root] [TTY=unknown] [CWD=/home/mimi] [COMMAND=/usr/sbin/gparted] Jun 7 00:48:15 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain ONE-SHOT authorization for action com.ubuntu.pkexec.gparted for unix-process:3813:281120 [/bin/sh /usr/bin/gparted-pkexec] (owned by unix-user:mimi) Jun 7 00:48:15 Isis pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Jun 7 00:48:15 Isis pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Jun 7 00:48:15 Isis pkexec[3815]: mimi: Executing command [USER=root] [TTY=unknown] [CWD=/home/mimi] [COMMAND=/usr/sbin/gparted] Jun 7 01:17:01 Isis CRON[3960]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 01:17:01 Isis CRON[3960]: pam_unix(cron:session): session closed for user root Jun 7 02:08:52 Isis gnome-screensaver-dialog: gkr-pam: unlocked login keyring Jun 7 02:17:01 Isis CRON[4246]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 02:17:01 Isis CRON[4246]: pam_unix(cron:session): session closed for user root Jun 7 02:17:05 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/apt-get install unetbootin Jun 7 02:17:05 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 02:17:57 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:18:59 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 02:18:59 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:19:26 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 02:19:26 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:33:21 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 02:33:21 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 02:40:04 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin rootcheck=no Jun 7 02:40:04 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 03:17:01 Isis CRON[5506]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 03:17:01 Isis CRON[5506]: pam_unix(cron:session): session closed for user root Jun 7 03:33:24 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 03:33:43 Isis sudo: mimi : 3 incorrect password attempts ; TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin showall=yes 'rootcheck=no' Jun 7 03:33:43 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 04:17:01 Isis CRON[6119]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 04:17:01 Isis CRON[6119]: pam_unix(cron:session): session closed for user root Jun 7 04:18:35 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action org.debian.apt.install-or-remove-packages for system-bus-name::1.79 [/usr/bin/python /usr/bin/landscape-client-ui-install] (owned by unix-user:mimi) Jun 7 04:19:11 Isis groupadd[6702]: group added to /etc/group: name=landscape, GID=127 Jun 7 04:19:11 Isis groupadd[6702]: group added to /etc/gshadow: name=landscape Jun 7 04:19:11 Isis groupadd[6702]: new group: name=landscape, GID=127 Jun 7 04:19:11 Isis useradd[6706]: new user: name=landscape, UID=115, GID=127, home=/var/lib/landscape, shell=/bin/false Jun 7 04:19:12 Isis usermod[6711]: change user 'landscape' password Jun 7 04:19:12 Isis chage[6716]: changed password expiry for landscape Jun 7 04:19:37 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6146:1543697 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 04:20:20 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6832:1555313 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 04:21:04 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:6827:1555123 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:21:08 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:6827:1555123 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:21:44 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action org.debian.apt.install-or-remove-packages for system-bus-name::1.87 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:22:27 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:7830:1567424 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 04:25:50 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:7876:1584865 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:25:52 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:7876:1584865 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 05:11:57 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action org.debian.apt.install-or-remove-packages for system-bus-name::1.95 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 05:17:02 Isis CRON[8708]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 05:17:02 Isis CRON[8708]: pam_unix(cron:session): session closed for user root Jun 7 05:28:03 Isis lightdm: pam_unix(lightdm-autologin:session): session opened for user mimi by (uid=0) Jun 7 05:28:03 Isis lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Jun 7 05:28:17 Isis polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.32 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) Jun 7 05:28:32 Isis dbus[660]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.44" (uid=1000 pid=1736 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1333 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 06:17:01 Isis CRON[2391]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 06:17:02 Isis CRON[2391]: pam_unix(cron:session): session closed for user root Jun 7 06:25:02 Isis CRON[2492]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 06:25:02 Isis CRON[2492]: pam_unix(cron:session): session closed for user root Jun 7 07:17:01 Isis CRON[3174]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 07:17:01 Isis CRON[3174]: pam_unix(cron:session): session closed for user root Jun 7 07:30:01 Isis CRON[3397]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 07:30:01 Isis CRON[3397]: pam_unix(cron:session): session closed for user root Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:01 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/share/checkbox/backend --path=/usr/share/checkbox/scripts:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games /tmp/checkboxQbuE6V/input /tmp/checkboxQbuE6V/output Jun 7 08:09:01 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:59 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/share/checkbox/backend --path=/usr/share/checkbox/scripts:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games /tmp/checkboxQbuE6V/input /tmp/checkboxQbuE6V/output Jun 7 08:09:59 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:10:55 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/share/checkbox/backend --path=/usr/share/checkbox/scripts:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games /tmp/checkboxQbuE6V/input /tmp/checkboxQbuE6V/output Jun 7 08:10:55 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 08:17:01 Isis CRON[4215]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 08:17:01 Isis CRON[4215]: pam_unix(cron:session): session closed for user root Jun 7 09:17:02 Isis CRON[4766]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 09:17:02 Isis CRON[4766]: pam_unix(cron:session): session closed for user root Jun 7 10:17:02 Isis CRON[5046]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 10:17:02 Isis CRON[5046]: pam_unix(cron:session): session closed for user root Jun 7 11:17:02 Isis CRON[5325]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 11:17:02 Isis CRON[5325]: pam_unix(cron:session): session closed for user root Jun 7 12:17:01 Isis CRON[5617]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 12:17:01 Isis CRON[5617]: pam_unix(cron:session): session closed for user root Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): authentication failure; logname= uid=1000 euid=1000 tty=:0.0 ruser= rhost= user=mimi Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): getting password (0x00000388) Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): pam_get_item returned a password Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): request wbcLogonUser failed: WBC_ERR_AUTH_ERROR, PAM error: PAM_USER_UNKNOWN (10), NTSTATUS: NT_STATUS_NO_SUCH_USER, Error message was: No such user Jun 7 13:08:03 Isis gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): conversation failed Jun 7 13:08:03 Isis gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): auth could not identify password for [mimi] Jun 7 13:08:03 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): getting password (0x00000388) Jun 7 13:08:08 Isis lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) Jun 7 13:08:08 Isis lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :1 Jun 7 13:08:13 Isis lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "mimi" Jun 7 13:08:16 Isis dbus[660]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.91" (uid=104 pid=5961 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1333 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 13:08:18 Isis dbus[660]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.98" (uid=104 pid=5999 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1333 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 13:10:15 Isis lightdm: pam_unix(lightdm:session): session closed for user lightdm Jun 7 13:17:02 Isis CRON[6181]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 13:17:02 Isis CRON[6181]: pam_unix(cron:session): session closed for user root Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 13:55:14 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 13:55:14 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 14:02:33 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6736:3087856 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 14:02:51 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6752:3089992 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 14:03:14 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6763:3092515 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 14:17:01 Isis CRON[6933]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 14:17:01 Isis CRON[6933]: pam_unix(cron:session): session closed for user root Jun 7 15:17:02 Isis CRON[7611]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 15:17:02 Isis CRON[7611]: pam_unix(cron:session): session closed for user root

Read the article

CodePlex Daily Summary for Thursday, November 18, 2010

CodePlex Daily Summary for Thursday, November 18, 2010Popular ReleasesSitefinity Migration Tool: Sitefinity Migration Tool 0.2 Alpha: - Improvements for the Sitefinity RC releaseMiniTwitter: 1.57: MiniTwitter 1.57 ???? ?? ?????????????????? ?? User Streams ????????????????????? ???????????????·??????·???????VFPX: VFP2C32 2.0.0.7: fixed a bug in AAverage - NULL values in the array corrupted the result removed limitation in ASum, AMin, AMax, AAverage - the functions were limited to 65000 elements, now they're limited to 65000 rows ASplitStr now returns a 1 element array with an empty string when an empty string is passed (behaves more like ALINES) internal code cleanup and optimization: optimized FoxArray class - results in a speedup of 10-20% in many functions which return the result in an array - like AProcesses...Microsoft SQL Server Product Samples: Database: AdventureWorks 2008R2 SR1: Sample Databases for Microsoft SQL Server 2008R2 (SR1)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. See Database Prerequisites for SQL Server 2008R2 for feature configurations required for installing the sample databases. See Installing SQL Server 2008R2 Databases for step by step installation instructions. The SR1 release contains minor bug fixes to the installer used to create the sample databases. There are no changes to the databases them...VidCoder: 0.7.2: Fixed duplicated subtitles when running multiple encodes off of the same title.Razor Templating Engine: Razor Template Engine v1.1: Release 1.1 Changes: ADDED: Signed assemblies with strong name to allow assemblies to be referenced by other strongly-named assemblies. FIX: Filter out dynamic assemblies which causes failures in template compilation. FIX: Changed ASCII to UTF8 encoding to support UTF-8 encoded string templates. FIX: Corrected implementation of TemplateBase adding ITemplate interface.Prism Training Kit: Prism Training Kit - 1.1: This is an updated version of the Prism training Kit that targets Prism 4.0 and fixes the bugs reported in the version 1.0. This release consists of a Training Kit with Labs on the following topics Modularity Dependency Injection Bootstrapper UI Composition Communication Note: Take into account that this is a Beta version. If you find any bugs please report them in the Issue Tracker PrerequisitesVisual Studio 2010 Microsoft Word 2007/2010 Microsoft Silverlight 4 Microsoft S...Craig's Utility Library: Craig's Utility Library Code 2.0: This update contains a number of changes, added functionality, and bug fixes: Added transaction support to SQLHelper. Added linked/embedded resource ability to EmailSender. Updated List to take into account new functions. Added better support for MAC address in WMI classes. Fixed Parsing in Reflection class when dealing with sub classes. Fixed bug in SQLHelper when replacing the Command that is a select after doing a select. Fixed issue in SQL Server helper with regard to generati...MFCMAPI: November 2010 Release: Build: 6.0.0.1023 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeDotNetNuke® Community Edition: 05.06.00: Major HighlightsAdded automatic portal alias creation for single portal installs Updated the file manager upload page to allow user to upload multiple files without returning to the file manager page. Fixed issue with Event Log Email Notifications. Fixed issue where Telerik HTML Editor was unable to upload files to secure or database folder. Fixed issue where registration page is not set correctly during an upgrade. Fixed issue where Sendmail stripped HTML and Links from emails...mVu Mobile Viewer: mVu Mobile Viewer 0.7.10.0: Tube8 fix.EPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.8.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the serverNew Features Improved chart support Different chart-types series on the same chart Support for secondary axis and a lot of new properties Better styling Encryption and Workbook protection Table support Import csv files Array formulas ...and a lot of bugfixesAutoLoL: AutoLoL v1.4.2: Added support for more clients (French and Russian) Settings are now stored sepperatly for each user on a computer Auto Login is much faster now Auto Login detects and handles caps lock state properly nowTailspinSpyworks - WebForms Sample Application: TailspinSpyworks-v0.9: Contains a number of bug fixes and additional tutorial steps as well as complete database implementation details.ASP.NET MVC Project Awesome (rich jQuery AJAX helpers): 1.3 and demos: a library with mvc helpers and a demo project that demonstrates an awesome way of doing asp.net mvc. tested on mozilla, safari, chrome, opera, ie 9b/8/7/6 new stuff in 1.3 Autocomplete helper Autocomplete and AjaxDropdown can have parentId and be filled with data depending on the value of the parent PopupForm besides Content("ok") on success can also return Json(data) and use 'data' in a client side function Awesome demo improved (cruder, builder, added service layer)Nearforums - ASP.NET MVC forum engine: Nearforums v4.1: Version 4.1 of the ASP.NET MVC forum engine, with great improvements: TinyMCE added as visual editor for messages (removed CKEditor). Integrated AntiSamy for cleaner html user post and add more prevention to potential injections. Admin status page: a page for the site admin to check the current status of the configuration / db / etc. View Roadmap for more details.UltimateJB: UltimateJB 2.01 PL3 KakaRoto + PSNYes by EvilSperm: Voici une version attendu avec impatience pour beaucoup : - La Version PSNYes pour pouvoir jouer sur le PSN avec une PS3 Jailbreaker. - Pour l'instant le PSNYes n'est disponible qu'avec les PS3 en firmwares 3.41 !!! - La version PL3 KAKAROTO intégre ses dernières modification et prépare a l'intégration du Firmware 3.30 !!! Conclusion : - UltimateJB PSNYes => Valide l'utilisation du PSN : Uniquement compatible avec les 3.41 - ultimateJB DEFAULT => Pas de PSN mais disponible pour les PS3 sui...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 2.0: Fluent Ribbon Control Suite 2.0(supports .NET 4.0 RTM and .NET 3.5) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples (only for .NET 4.0) Foundation (Tabs, Groups, Contextual Tabs, Quick Access Toolbar, Backstage) Resizing (ribbon reducing & enlarging principles) Galleries (Gallery in ContextMenu, InRibbonGallery) MVVM (shows how to use this library with Model-View-ViewModel pattern) KeyTips ScreenTips Toolbars ColorGallery NEW! *Walkthrough (documenta...patterns & practices: Prism: Prism 4 Documentation: This release contains the Prism 4 documentation in Help 1.0 (CHM) format and PDF format. The documentation is also included with the full download of the guidance. Note: If you cannot view the content of the CHM, using Windows Explorer, select the properties for the file and then click Unblock on the General tab. Note: The PDF version of the guidance is provided for printing and reading in book format. The online version of the Prism 4 documentation can be read here.Farseer Physics Engine: Farseer Physics Engine 3.1: DonationsIf you like this release and would like to keep Farseer Physics Engine running, please consider a small donation. What's new?We bring a lot of new features in Farseer Physics Engine 3.1. Just to name a few: New Box2D core Rope joint added More stable CCD algorithm YuPeng clipper Explosives logic New Constrained Delaunay Triangulation algorithm from the Poly2Tri project. New Flipcode triangulation algorithm. Silverlight 4 samples Silverlight 4 debug view XNA 4.0 relea...New Projectsbizicosoft crm: crmBlog Migrator: The Blog Migrator tool is an all purpose utility designed to help transition a blog from one platform to another. It leverages XML-RPC, BlogML, and WordPress WXR formats. It also provides the ability to "rewrite" your posts on your old blog to point to the new location.bzr-tfs integration tests: Used to test bzr-tfs integrationC++ Open Source Advanced Operating System: C++ Open Source Advanced Operating System is a project which allows starter developers create their own OS. For now it is at a really initial stage.Chavah - internet radio for Yeshua's disciples: Chavah (pronounced "ha-vah") is internet radio for Yeshua's disciples. Inspired by Pandora, Chavah is a Silverlight application that brings community-driven Messianic Jewish tunes for the Lord over the web to your eager ears.CodePoster: An add-in for Visual Studio which allows you to post code directly from Visual Studio to your blog. CRM 2011 Plugin Testing Tools: This solution is meant to make unit testing of plugins in CRM 2011 a simpler and more efficient process. This solution serializes the objects that the CRM server passes to a plugin on execution and then offers a library that allows you to deserialize them in a unit test.Edinamarry Free Tarot Software for Windows: A freeware yet an advanced Tarot reading divinity Software for Psychics and for all those who practice Divinity and Spirituality. This software includes Tarot Spread Designer, Tarot Deck Designer, Tarot Cards Gallery, Client & Customer Profile, Word Editor, Tarot Reader, etc.EPiSocial: Social addons for EPiServer.first team foundation project: this is my first project for the student to teach them about the ms visual studio 201o and team foundation serverFKTdev: Proyecto donde subiremos las pruebas, códigos de ejemplo y demás recursos en nuestro aprendizaje en XNA, hasta que comencemos un desarrollo estable.Gardens Point Component Pascal: Gardens Point Component Pascal is an implementation for .NET of the Component Pascal Language (CP). CP is an object oriented version of Pascal, and shares many design features with Oberon-2. Geoinformatics: geoinformaticsGREENHOUSEMANAGER: GREENHOUSE es un proyecto universitario para manejar los distintos aspectos de un invernadero. El sistema esta desarrollado en c# con interfaz grafica en WPFHousing: This project is only for the asp.net learning. HR-XML.NET: A .NET HR-XML Serialization Library. Also supports the Dutch SETU standard and some proprietary extensions used in the Netherlands. The project is currently targeting HR-XML version 2.5 and Setu standard 2008-01.InternetShop2: ShopLesson4: Lesson4 for M.Logical Synchronous Circuit Simulator: As part of a student project, we are trying to make a logic synchronous circuit simulator, with the ultimate goal of simulating a processor and a digital clock running on it.MediaOwl: MediaOwl is a music (albums, artists, tracks, tags) and movie (movies, series, actors, directors, genres) search engine, but above all, it is a Microsoft Silverlight 4 application (C#), that shows how to use Caliburn Micro.N2F Yverdon Solar Flare Reflector: The solar flare reflector provides minimal base-range protection for your N2F Yverdon installation against solar flare interference.Netduino Plus Home Automation Toolkit: The Netduino Plus Home Automation project is designed to proivde a communication platform from various consumer based home automation products that offer a common web service endpoint. This will hopefully create a low cost DIY alternative to the expensive ethernet interfaces.NRapid: NRapidOfficeHelper: Wrapper around the open xml office package. You can easily create xlsx documents based on a template xlsx document and reuse parts from that document, if you mark them as named ranges (i.e. "names").OffProjects: This is a private project which for my dev investigationParis Velib Stations for Windows Mobile: Allow to find the closest Velib bike station in Paris on a Windows Mobile Phone (6.5)/ Permet de trouver la station de Vélib la plus proche dans Paris ainsi que ses informations sur un smartphone Windows MobilePolarConverter: Adjust the measured distance of HRM files created by Polar Heart Rate monitorsSexy Select: a jQuery plugin that allows for easy manipulation of select options. Allows for adding, removing, sorting, validation and custom skinningSilverlight Progress Feedback: Demonstrates how to get progress feedback from slow running WPF processes in Silverlight.Silverlight Tabbed Panel: Tabbed Panel based on Silverlight targeted for both developers and designers audience. Tabbed Control is used in this project. This is a basic application. More features will be added in further releases. XAML has been used to design this panel. slabhid: SLABHIDDevice.dll is used for the SLAB MCU example code on PC, the original source code is written by C++. This wrapper class brings SLABHIDDevice.dll to the .Net world, so it will be possible to make some quick solution for firmware testing purpose.SuperWebSocket: A .NET server side implementation of WebSocket protocol.test1-jjoiner: just a test projectTotem Alpha Developer Framework For .Net: ????tadf??VS.NET???????????，????jtadf???????????????。 ?????????tadf??????????????J2EE???????VS.NET?????????，??tadf?????.NET??，???????????，????????????，??????C#??????????Java???????，??????。 tadf?????????????，????HTML???????????，???????，?????????，?????。tadf???????????，????????RICH UI?????WEB??。??????，??。 tadf?????????????????????，????WEB??????????。???????，???????????，?Ajax???????，????????????????，????????，????????????????。???????????，???????????????????????????????，?xml??????，?????????????xml...Ukázkové projekty: Obsahuje ukázkové projekty uživatele TenCoKaciStromy.WPFDemo: This Peoject is only for the WPF learning.Xinx TimeIt!: TinyAlarm is a small utility that allows you to configure an Alarm so that you can opt for 1. Shutdown computer 2. Play a sound 3. Show a note with sound 4. Disconnect a dial-up connection 5. Connect via dial-up connection

Search Results

Search found 19458 results on 779 pages for 'interface implementation'.

Page 211/779 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218 | Next Page >

- by Paul Petrov

- by Tanu Sood

- by ByronNevins

- by codingbloke

- by cibrax

- by Tim Dexter

- by ezz9

- by sathya

- by asantaga

- by Breno

- by Jenna Danko

- by Lewis

- by Simon Cooper

- by Pavel Bucek

- by Jeff

- by charlie.mott

- by user1459024

- by MarkPearl

- by arungupta

- by jon

- by Bevor

- by Quentin Swain

- by Sesame

- by mmj

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218 | Next Page >