Search Results

Search found 22211 results on 889 pages for 'client identifier'.

Page 212/889 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

  • Why does Ubuntu 13.10 not detect my Win7 partition?

    - by goutham
    I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

    Read the article

  • How to help FGLRX detect a device

    - by user113416
    I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

    Read the article

  • How do I debug xorg/fglrx related system freezes on Ubuntu 12.10?

    - by racerror
    My brand new system is randomly freezing and I don't know how to debug the issue. System: AMD A10-5800k Asus F2A85-M motherboard Integrated Radeon HD 7660D 8gb Samsung ddr3 1600 Ubuntu 12.10 Gnome shell / Unity (issue exists in both) xorg.conf (relevant parts): Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:0:1:0" Option "TexturedVideoSync" "on" Option "UseFastTLS" "2" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "Monitor0" DefaultDepth 24 Option "UseEDID" "False" Option "ExactModeTimingsDVI" "True" Option "NoBandWidthTest" "true" Option "ModeValidation" "AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes" Option "UseEDIDDPI" "False" Option "UseEDIDFreqs" "0" Option "NoLogo" "True" Option "Coolbits" "1" Option "metamodes" "DFP-0: 2560x1440_60 +0+0" SubSection "Display" Depth 24 Modes "2560x1440" EndSubSection I ran memtest on my ram and it checks out fine. I have tried using the latest fglrx and fglrx-beta. I have loaded 3.6.x kernel. I do not see anything relevant in dmesg, kern.log, syslog, .xsession-errors or Xorg.log. I cannot ssh into the machine when frozen from another machine. I know that system resources not being stressed when the crashes happen. It seems that video and any gaming (very simple graphics games) contribute to the freezes most frequently. However, I have experienced the crash before when just using Chrome. I suspect the crashes are xorg/fglrx related, but I have no evidence to back that up. Where should I look? What should I grep for? What should I try next?

    Read the article

  • Are Windows partitions gone?

    - by Gigili
    I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

    Read the article

  • SD Card only mounted after a reboot

    - by evothur
    Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

    Read the article

  • How to mount drive in /media/userName/ like nautilus do using udisks

    - by Bsienn
    As of my current installation of Ubuntu 13.10 Unity, when i click on a drive in nautilus it get mounted in /media/username/mountedDrive i read that nautilus use udisks to do that. Basically i want to auto mount my drive using udisks in start up using this method But problem is, it mounts the drive in /media/mountedDrive, but i want it the way nautilus do in /media/username/mounteDrive I want NTFS Data drive to be auto mounted at /media/bsienn/ bsienn@bsienn-desktop:~$ blkid /dev/sda1: LABEL="System Reserved" UUID="8230744030743D6B" TYPE="ntfs" /dev/sda2: LABEL="Windows 7" UUID="60100EA5100E81F0" TYPE="ntfs" /dev/sda3: LABEL="Data" UUID="882C04092C03F14C" TYPE="ntfs" /dev/sda5: UUID="8768800f-59e1-41a2-9092-c0a8cb60dabf" TYPE="swap" /dev/sda6: LABEL="Ubuntu Drive" UUID="13ea474a-fb27-4c91-bae7-c45690f88954" TYPE="ext4" /dev/sda7: UUID="69c22e73-9f64-4b48-b854-7b121642cd5d" TYPE="ext4" bsienn@bsienn-desktop:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders, total 312500000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8d528d52 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 117730069 58761611 7 HPFS/NTFS/exFAT /dev/sda3 158690072 312494116 76902022+ 7 HPFS/NTFS/exFAT /dev/sda4 117731326 158689279 20478977 5 Extended /dev/sda5 137263104 141260799 1998848 82 Linux swap / Solaris /dev/sda6 141262848 158689279 8713216 83 Linux /dev/sda7 117731328 137263103 9765888 83 Linux Partition table entries are not in disk order bsienn@bsienn-desktop:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda7 during installation UUID=69c22e73-9f64-4b48-b854-7b121642cd5d / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=8768800f-59e1-41a2-9092-c0a8cb60dabf none swap sw 0 0 Desired effect: Picture link

    Read the article

  • ubuntu boots only with usb

    - by klimat
    Just installed Ubuntu 11.04. But it boots only from usb. Seems like I didn't pay attention during selecting boot device. sudo fdisk -l [sudo] password for klim: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000177e1 Device Boot Start End Blocks Id System /dev/sda1 1 60045 482302976 83 Linux /dev/sda2 60045 60802 6080513 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 60045 60802 6080512 82 Linux swap / Solaris Disk /dev/sdb: 4004 MB, 4004511744 bytes 124 heads, 62 sectors/track, 1017 cylinders Units = cylinders of 7688 * 512 = 3936256 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000eee1a Device Boot Start End Blocks Id System /dev/sdb1 * 1 1017 3909317 b W95 FAT32 grub updating or another "grub" operations don't work as I've tried. Can I just copy whole boot folder from usb to HD or smth like that? Any kind of help is appreciated. Apologize for my newbie skills.

    Read the article

  • Grub not loading after Windows 8 Install

    - by RazorXsr
    My system was configured to dual boot Ubuntu 12.04.1 LTS and Windows 7. Today I got my hands on the MSDN release of Windows 8 and I installed it over my Windows 7. Now the computer just boots to Windows 8 directly without loading the GRUB screen. So I followed the steps as suggested in: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows. Running this command: ls -l /dev/disk/by-label/ gives the following output: total 0 lrwxrwxrwx 1 root root 10 Sep 11 07:51 Entertainment -> ../../sda2 lrwxrwxrwx 1 root root 10 Sep 11 02:45 PENDRIVE -> ../../sdb1 Also fdisk -l command gives this as the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1246aa23 Device Boot Start End Blocks Id System /dev/sda1 * 2048 319582199 159790076 7 HPFS/NTFS/exFAT /dev/sda2 319582208 602906623 141662208 7 HPFS/NTFS/exFAT /dev/sda3 602908672 625135615 11113472 83 Linux Disk /dev/sdb: 1939 MB, 1939865600 bytes 64 heads, 63 sectors/track, 939 cylinders, total 3788800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 2248 3788799 1893276 c W95 FAT32 (LBA) So I assume that I have to run this: sudo grub-install /dev/sda3 to get GRUB up and running. But I am getting this error: /usr/sbin/grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?). Can anyone please guide me in the right direction? The current Ubuntu installation is far too customized to my needs to lose it to a boot manager issue! Any help is much appreciated!

    Read the article

  • How do I get 12.04 to recognize swap partition so that I can hibernate?

    - by Kayla
    I justed installed 12.04 and used gparted to erase and enlarge my swap partition. When I rebooted, gparted said that the file partition for the swap was unknown. Gparted doesn't let me change the file partition to "linux-swap". It does let me change it to NTFS, but when I reboot, it goes back to "unknown". Thanks in advance for your help. Output from sudo swapon -s: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 9025532 0 -1 Output from sudo fdisk -l: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d63ac84 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2459647 1228800 7 HPFS/NTFS/exFAT /dev/sda2 2459648 197836472 97688412+ 7 HPFS/NTFS/exFAT /dev/sda3 466890752 488395119 10752184 7 HPFS/NTFS/exFAT /dev/sda4 197836798 466890751 134526977 5 Extended /dev/sda5 197836800 448837631 125500416 83 Linux /dev/sda6 448839680 466890751 9025536 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mapper/cryptswap1: 9242 MB, 9242148864 bytes 255 heads, 63 sectors/track, 1123 cylinders, total 18051072 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x951b7f53 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

    Read the article

  • How can I get rid of the motd message "*** /dev/sdb1 will be checked for errors at next reboot ***"? [duplicate]

    - by kmm
    This question already has an answer here: Persistent “disk will be checked…” in the message of the day (motd) even after reboot 3 answers My motd persistently has: *** /dev/sdb1 will be checked for errors at next reboot *** The problem is that I don't have /dev/sdb1 on my system. I only have /dev/sdb2 (mouted as /) and /dev/sda1 which mounts to /media/backup. I delete that line from /etc/motd, but it reappears after reboot. Here's my df output: Filesystem Size Used Avail Use% Mounted on /dev/sdb2 73G 3.7G 66G 6% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 760K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm /dev/sda1 1.9T 429G 1.4T 25% /media/backup Update Here is the output of sudo fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dfc2 Device Boot Start End Blocks Id System /dev/sda1 63 3907024064 1953512001 83 Linux Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049068 Device Boot Start End Blocks Id System /dev/sdb1 152301568 156301311 1999872 82 Linux swap / Solaris /dev/sdb2 * 2048 152301567 76149760 83 Linux Partition table entries are not in disk order I guess /dev/sdb1 is my swap space.

    Read the article

  • Unable to mount location ubuntu 12.10

    - by Rajesh
    I'm new to Ubuntu. I installed Ubuntu 12.10 replacing windows. Now I'm getting Unable to mount location error while opening the drive. $ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=5fa63194-c19e-4117-95c6-679eb6453d3b / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=70f1ec8d-aa45-4de7-a206-747dccd2472b none swap sw 0 0 $ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001f10f Device Boot Start End Blocks Id System /dev/sda1 * 2048 970561535 485279744 83 Linux /dev/sda2 970563582 976771071 3103745 5 Extended /dev/sda5 970563584 976771071 3103744 82 Linux swap / Solaris

    Read the article

  • Mounting a new hard drive (sda1) to my existing filesystem

    - by shank22
    I tried to read some posts regarding mounting a new hard drive, but I am facing some problem. My new hard drive is sda1. The output of sudo fdisk -l is: sudo fdisk -l Disk /dev/sdb: 999.7 GB, 999653638144 bytes 255 heads, 63 sectors/track, 121534 cylinders, total 1952448512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00016485 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 1935822847 967910400 83 Linux /dev/sdb2 1935824894 1952446463 8310785 5 Extended /dev/sdb5 1935824896 1952446463 8310784 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x78dbcdc1 Device Boot Start End Blocks Id System /dev/sda1 2048 1953521663 976759808 7 HPFS/NTFS/exFAT What should be done to add this new sda1 hard drive on booting up? What should be added in the /etc/fstab file? I have not performed any partition on the new sda1 drive. I need help on how to proceed from scratch and can't afford to take any risk. Please help!

    Read the article

  • any clue in these logs why keyboard audio and internet are messed up

    - by mmj
    Jun 7 00:01:18 Isis lightdm: pam_unix(lightdm-autologin:session): session opened for user mimi by (uid=0) Jun 7 00:01:18 Isis lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Jun 7 00:01:26 Isis polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.36 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale zh_CN.UTF-8) Jun 7 00:01:29 Isis dbus[610]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.44" (uid=1000 pid=1763 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.15" (uid=0 pid=1219 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 00:07:55 Isis sudo: pam_unix(sudo:auth): authentication failure; logname=mimi uid=1000 euid=0 tty=/dev/pts/1 ruser=mimi rhost= user=mimi Jun 7 00:08:11 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/add-apt-repository ppa:colingille/freshlight Jun 7 00:08:11 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 00:08:32 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 00:11:20 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/apt-get install gparted Jun 7 00:11:20 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 00:11:59 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 00:17:02 Isis CRON[2651]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 00:17:02 Isis CRON[2651]: pam_unix(cron:session): session closed for user root Jun 7 00:17:32 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain ONE-SHOT authorization for action com.ubuntu.pkexec.gparted for unix-process:2655:96838 [/bin/sh /usr/bin/gparted-pkexec] (owned by unix-user:mimi) Jun 7 00:17:32 Isis pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Jun 7 00:17:32 Isis pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Jun 7 00:17:32 Isis pkexec[2657]: mimi: Executing command [USER=root] [TTY=unknown] [CWD=/home/mimi] [COMMAND=/usr/sbin/gparted] Jun 7 00:48:15 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain ONE-SHOT authorization for action com.ubuntu.pkexec.gparted for unix-process:3813:281120 [/bin/sh /usr/bin/gparted-pkexec] (owned by unix-user:mimi) Jun 7 00:48:15 Isis pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Jun 7 00:48:15 Isis pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Jun 7 00:48:15 Isis pkexec[3815]: mimi: Executing command [USER=root] [TTY=unknown] [CWD=/home/mimi] [COMMAND=/usr/sbin/gparted] Jun 7 01:17:01 Isis CRON[3960]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 01:17:01 Isis CRON[3960]: pam_unix(cron:session): session closed for user root Jun 7 02:08:52 Isis gnome-screensaver-dialog: gkr-pam: unlocked login keyring Jun 7 02:17:01 Isis CRON[4246]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 02:17:01 Isis CRON[4246]: pam_unix(cron:session): session closed for user root Jun 7 02:17:05 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/apt-get install unetbootin Jun 7 02:17:05 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 02:17:57 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:18:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:18:59 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 02:18:59 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:19:26 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:19:26 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 02:19:26 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 02:33:21 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 02:33:21 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 02:33:21 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 02:40:04 Isis sudo: mimi : TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin rootcheck=no Jun 7 02:40:04 Isis sudo: pam_unix(sudo:session): session opened for user root by mimi(uid=1000) Jun 7 03:17:01 Isis CRON[5506]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 03:17:01 Isis CRON[5506]: pam_unix(cron:session): session closed for user root Jun 7 03:33:24 Isis sudo: pam_unix(sudo:session): session closed for user root Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 03:33:43 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 03:33:43 Isis sudo: mimi : 3 incorrect password attempts ; TTY=pts/1 ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin showall=yes 'rootcheck=no' Jun 7 03:33:43 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 04:17:01 Isis CRON[6119]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 04:17:01 Isis CRON[6119]: pam_unix(cron:session): session closed for user root Jun 7 04:18:35 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action org.debian.apt.install-or-remove-packages for system-bus-name::1.79 [/usr/bin/python /usr/bin/landscape-client-ui-install] (owned by unix-user:mimi) Jun 7 04:19:11 Isis groupadd[6702]: group added to /etc/group: name=landscape, GID=127 Jun 7 04:19:11 Isis groupadd[6702]: group added to /etc/gshadow: name=landscape Jun 7 04:19:11 Isis groupadd[6702]: new group: name=landscape, GID=127 Jun 7 04:19:11 Isis useradd[6706]: new user: name=landscape, UID=115, GID=127, home=/var/lib/landscape, shell=/bin/false Jun 7 04:19:12 Isis usermod[6711]: change user 'landscape' password Jun 7 04:19:12 Isis chage[6716]: changed password expiry for landscape Jun 7 04:19:37 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6146:1543697 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 04:20:20 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6832:1555313 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 04:21:04 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:6827:1555123 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:21:08 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:6827:1555123 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:21:44 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action org.debian.apt.install-or-remove-packages for system-bus-name::1.87 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:22:27 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:7830:1567424 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 04:25:50 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:7876:1584865 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 04:25:52 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.ubuntu.languageselector.setsystemdefaultlanguage for unix-process:7876:1584865 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 05:11:57 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action org.debian.apt.install-or-remove-packages for system-bus-name::1.95 [/usr/bin/python /usr/bin/gnome-language-selector] (owned by unix-user:mimi) Jun 7 05:17:02 Isis CRON[8708]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 05:17:02 Isis CRON[8708]: pam_unix(cron:session): session closed for user root Jun 7 05:28:03 Isis lightdm: pam_unix(lightdm-autologin:session): session opened for user mimi by (uid=0) Jun 7 05:28:03 Isis lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Jun 7 05:28:17 Isis polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.32 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) Jun 7 05:28:32 Isis dbus[660]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.44" (uid=1000 pid=1736 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1333 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 06:17:01 Isis CRON[2391]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 06:17:02 Isis CRON[2391]: pam_unix(cron:session): session closed for user root Jun 7 06:25:02 Isis CRON[2492]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 06:25:02 Isis CRON[2492]: pam_unix(cron:session): session closed for user root Jun 7 07:17:01 Isis CRON[3174]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 07:17:01 Isis CRON[3174]: pam_unix(cron:session): session closed for user root Jun 7 07:30:01 Isis CRON[3397]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 07:30:01 Isis CRON[3397]: pam_unix(cron:session): session closed for user root Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:01 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:01 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/share/checkbox/backend --path=/usr/share/checkbox/scripts:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games /tmp/checkboxQbuE6V/input /tmp/checkboxQbuE6V/output Jun 7 08:09:01 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:09:59 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:09:59 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/share/checkbox/backend --path=/usr/share/checkbox/scripts:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games /tmp/checkboxQbuE6V/input /tmp/checkboxQbuE6V/output Jun 7 08:09:59 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 08:10:55 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 08:10:55 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/share/checkbox/backend --path=/usr/share/checkbox/scripts:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games /tmp/checkboxQbuE6V/input /tmp/checkboxQbuE6V/output Jun 7 08:10:55 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 08:17:01 Isis CRON[4215]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 08:17:01 Isis CRON[4215]: pam_unix(cron:session): session closed for user root Jun 7 09:17:02 Isis CRON[4766]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 09:17:02 Isis CRON[4766]: pam_unix(cron:session): session closed for user root Jun 7 10:17:02 Isis CRON[5046]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 10:17:02 Isis CRON[5046]: pam_unix(cron:session): session closed for user root Jun 7 11:17:02 Isis CRON[5325]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 11:17:02 Isis CRON[5325]: pam_unix(cron:session): session closed for user root Jun 7 12:17:01 Isis CRON[5617]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 12:17:01 Isis CRON[5617]: pam_unix(cron:session): session closed for user root Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): authentication failure; logname= uid=1000 euid=1000 tty=:0.0 ruser= rhost= user=mimi Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): getting password (0x00000388) Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): pam_get_item returned a password Jun 7 13:07:51 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): request wbcLogonUser failed: WBC_ERR_AUTH_ERROR, PAM error: PAM_USER_UNKNOWN (10), NTSTATUS: NT_STATUS_NO_SUCH_USER, Error message was: No such user Jun 7 13:08:03 Isis gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): conversation failed Jun 7 13:08:03 Isis gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): auth could not identify password for [mimi] Jun 7 13:08:03 Isis gnome-screensaver-dialog: pam_winbind(gnome-screensaver:auth): getting password (0x00000388) Jun 7 13:08:08 Isis lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) Jun 7 13:08:08 Isis lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :1 Jun 7 13:08:13 Isis lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "mimi" Jun 7 13:08:16 Isis dbus[660]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.91" (uid=104 pid=5961 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1333 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 13:08:18 Isis dbus[660]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.98" (uid=104 pid=5999 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1333 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jun 7 13:10:15 Isis lightdm: pam_unix(lightdm:session): session closed for user lightdm Jun 7 13:17:02 Isis CRON[6181]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 13:17:02 Isis CRON[6181]: pam_unix(cron:session): session closed for user root Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): conversation failed Jun 7 13:55:14 Isis sudo: pam_unix(sudo:auth): auth could not identify password for [mimi] Jun 7 13:55:14 Isis sudo: mimi : 3 incorrect password attempts ; TTY=unknown ; PWD=/home/mimi ; USER=root ; COMMAND=/usr/bin/unetbootin 'rootcheck=no' Jun 7 13:55:14 Isis sudo: unable to execute /usr/sbin/sendmail: No such file or directory Jun 7 14:02:33 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6736:3087856 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 14:02:51 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 FAILED to authenticate to gain authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6752:3089992 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 14:03:14 Isis polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session1 successfully authenticated as unix-user:mimi to gain TEMPORARY authorization for action com.canonical.LandscapeClientSettings.configure for unix-process:6763:3092515 [/usr/bin/python /usr/bin/landscape-client-settings-ui] (owned by unix-user:mimi) Jun 7 14:17:01 Isis CRON[6933]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 14:17:01 Isis CRON[6933]: pam_unix(cron:session): session closed for user root Jun 7 15:17:02 Isis CRON[7611]: pam_unix(cron:session): session opened for user root by (uid=0) Jun 7 15:17:02 Isis CRON[7611]: pam_unix(cron:session): session closed for user root

    Read the article

  • Visual Studio 2010 and .NET 4 Released

    - by ScottGu
    The final release of Visual Studio 2010 and .NET 4 is now available. Download and Install Today MSDN subscribers, as well as WebsiteSpark/BizSpark/DreamSpark members, can now download the final releases of Visual Studio 2010 and TFS 2010 through the MSDN subscribers download center.  If you are not an MSDN Subscriber, you can download free 90-day trial editions of Visual Studio 2010.  Or you can can download the free Visual Studio express editions of Visual Web Developer 2010, Visual Basic 2010, Visual C# 2010 and Visual C++.  These express editions are available completely for free (and never time out).  If you are looking for an easy way to setup a new machine for web-development you can automate installing ASP.NET 4, ASP.NET MVC 2, IIS, SQL Server Express and Visual Web Developer 2010 Express really quickly with the Microsoft Web Platform Installer (just click the install button on the page). What is new with VS 2010 and .NET 4 Today’s release is a big one – and brings with it a ton of new feature and capabilities. One of the things we tried hard to focus on with this release was to invest heavily in making existing applications, projects and developer experiences better.  What this means is that you don’t need to read 1000+ page books or spend time learning major new concepts in order to take advantage of the release.  There are literally thousands of improvements (both big and small) that make you more productive and successful without having to learn big new concepts in order to start using them.  Below is just a small sampling of some of the improvements with this release: Visual Studio 2010 IDE  Visual Studio 2010 now supports multiple-monitors (enabling much better use of screen real-estate).  It has new code Intellisense support that makes it easier to find and use classes and methods. It has improved code navigation support for searching code-bases and seeing how code is called and used.  It has new code visualization support that allows you to see the relationships across projects and classes within projects, as well as to automatically generate sequence diagrams to chart execution flow.  The editor now supports HTML and JavaScript snippet support as well as improved JavaScript intellisense. The VS 2010 Debugger and Profiling support is now much, much richer and enables new features like Intellitrace (aka Historical Debugging), debugging of Crash/Dump files, and better parallel debugging.  VS 2010’s multi-targeting support is now much richer, and enables you to use VS 2010 to target .NET 2, .NET 3, .NET 3.5 and .NET 4 applications.  And the infamous Add Reference dialog now loads much faster. TFS 2010 is now easy to setup (you can now install the server in under 10 minutes) and enables great source-control, bug/work-item tracking, and continuous integration support.  Testing (both automated and manual) is now much, much richer.  And VS 2010 Premium and Ultimate provide much richer architecture and design tooling support. VB and C# Language Features VB and C# in VS 2010 both contain a bunch of new features and capabilities.  VB adds new support for automatic properties, collection initializers, and implicit line continuation support among many other features.  C# adds support for optional parameters and named arguments, a new dynamic keyword, co-variance and contra-variance, and among many other features. ASP.NET 4 and ASP.NET MVC 2 With ASP.NET 4, Web Forms controls now render clean, semantically correct, and CSS friendly HTML markup. Built-in URL routing functionality allows you to expose clean, search engine friendly, URLs and increase the traffic to your Website.  ViewState within applications can now be more easily controlled and made smaller.  ASP.NET Dynamic Data support has been expanded.  More controls, including rich charting and data controls, are now built-into ASP.NET 4 and enable you to build applications even faster.  New starter project templates now make it easier to get going with new projects.  SEO enhancements make it easier to drive traffic to your public facing sites.  And web.config files are now clean and simple. ASP.NET MVC 2 is now built-into VS 2010 and ASP.NET 4, and provides a great way to build web sites and applications using a model-view-controller based pattern. ASP.NET MVC 2 adds features to easily enable client and server validation logic, provides new strongly-typed HTML and UI-scaffolding helper methods.  It also enables more modular/reusable applications.  The new <%: %> syntax in ASP.NET makes it easier to HTML encode output.  Visual Studio 2010 also now includes better tooling support for unit testing and TDD.  In particular, “Consume first intellisense” and “generate from usage" support within VS 2010 make it easier to write your unit tests first, and then drive your implementation from them. Deploying ASP.NET applications gets a lot easier with this release. You can now publish your Websites and applications to a staging or production server from within Visual Studio itself. Visual Studio 2010 makes it easy to transfer all your files, code, configuration, database schema and data in one complete package. VS 2010 also makes it easy to manage separate web.config configuration files settings depending upon whether you are in debug, release, staging or production modes. WPF 4 and Silverlight 4 WPF 4 includes a ton of new improvements and capabilities including more built-in controls, richer graphics features (cached composition, pixel shader 3 support, layoutrounding, and animation easing functions), a much improved text stack (with crisper text rendering, custom dictionary support, and selection and caret brush options).  WPF 4 also includes a bunch of support to enable you to take advantage of new Windows 7 features – including multi-touch and Windows 7 shell integration. Silverlight 4 will launch this week as well.  You can watch my Silverlight 4 launch keynote streamed live Tuesday (April 13th) at 8am Pacific Time.  Silverlight 4 includes a ton of new capabilities – including a bunch for making it possible to build great business applications and out of the browser applications.  I’ll be doing a separate blog post later this week (once it is live on the web) that talks more about its capabilities. Visual Studio 2010 now includes great tooling support for both WPF and Silverlight.  The new VS 2010 WPF and Silverlight designer makes it much easier to build client applications as well as build great line of business solutions, as well as integrate and bind with data.  Tooling support for Silverlight 4 with the final release of Visual Studio 2010 will be available when Silverlight 4 releases to the web this week. SharePoint and Azure Visual Studio 2010 now includes built-in support for building SharePoint applications.  You can now create, edit, build, and debug SharePoint applications directly within Visual Studio 2010.  You can also now use SharePoint with TFS 2010. Support for creating Azure-hosted applications is also now included with VS 2010 – allowing you to build ASP.NET and WCF based applications and host them within the cloud. Data Access Data access has a lot of improvements coming to it with .NET 4.  Entity Framework 4 includes a ton of new features and capabilities – including support for model first and POCO development, default support for lazy loading, built-in support for pluralization/singularization of table/property names within the VS 2010 designer, full support for all the LINQ operators, the ability to optionally expose foreign keys on model objects (useful for some stateless web scenarios), disconnected API support to better handle N-Tier and stateless web scenarios, and T4 template customization support within VS 2010 to allow you to customize and automate how code is generated for you by the data designer.  In addition to improvements with the Entity Framework, LINQ to SQL with .NET 4 also includes a bunch of nice improvements.  WCF and Workflow WCF includes a bunch of great new capabilities – including better REST, activation and configuration support.  WCF Data Services (formerly known as Astoria) and WCF RIA Services also now enable you to easily expose and work with data from remote clients. Windows Workflow is now much faster, includes flowchart services, and now makes it easier to make custom services than before.  More details can be found here. CLR and Core .NET Library Improvements .NET 4 includes the new CLR 4 engine – which includes a lot of nice performance and feature improvements.  CLR 4 engine now runs side-by-side in-process with older versions of the CLR – allowing you to use two different versions of .NET within the same process.  It also includes improved COM interop support.  The .NET 4 base class libraries (BCL) include a bunch of nice additions and refinements.  In particular, the .NET 4 BCL now includes new parallel programming support that makes it much easier to build applications that take advantage of multiple CPUs and cores on a computer.  This work dove-tails nicely with the new VS 2010 parallel debugger (making it much easier to debug parallel applications), as well as the new F# functional language support now included in the VS 2010 IDE.  .NET 4 also now also has the Dynamic Language Runtime (DLR) library built-in – which makes it easier to use dynamic language functionality with .NET.  MEF – a really cool library that enables rich extensibility – is also now built-into .NET 4 and included as part of the base class libraries.  .NET 4 Client Profile The download size of the .NET 4 redist is now much smaller than it was before (the x86 full .NET 4 package is about 36MB).  We also now have a .NET 4 Client Profile package which is a pure sub-set of the full .NET that can be used to streamline client application installs. C++ VS 2010 includes a bunch of great improvements for C++ development.  This includes better C++ Intellisense support, MSBuild support for projects, improved parallel debugging and profiler support, MFC improvements, and a number of language features and compiler optimizations. My VS 2010 and .NET 4 Blog Series I’ve been cranking away on a blog series the last few months that highlights many of the new VS 2010 and .NET 4 improvements.  The good news is that I have about 20 in-depth posts already written.  The bad news (for me) is that I have about 200 more to go until I’m done!  I’m going to try and keep adding a few more each week over the next few months to discuss the new improvements and how best to take advantage of them. Below is a list of the already written ones that you can check out today: Clean Web.Config Files Starter Project Templates Multi-targeting Multiple Monitor Support New Code Focused Web Profile Option HTML / ASP.NET / JavaScript Code Snippets Auto-Start ASP.NET Applications URL Routing with ASP.NET 4 Web Forms Searching and Navigating Code in VS 2010 VS 2010 Code Intellisense Improvements WPF 4 Add Reference Dialog Improvements SEO Improvements with ASP.NET 4 Output Cache Extensibility with ASP.NET 4 Built-in Charting Controls for ASP.NET and Windows Forms Cleaner HTML Markup with ASP.NET 4 - Client IDs Optional Parameters and Named Arguments in C# 4 - and a cool scenarios with ASP.NET MVC 2 Automatic Properties, Collection Initializers and Implicit Line Continuation Support with VB 2010 New <%: %> Syntax for HTML Encoding Output using ASP.NET 4 JavaScript Intellisense Improvements with VS 2010 Stay tuned to my blog as I post more.  Also check out this page which links to a bunch of great articles and videos done by others. VS 2010 Installation Notes If you have installed a previous version of VS 2010 on your machine (either the beta or the RC) you must first uninstall it before installing the final VS 2010 release.  I also recommend uninstalling .NET 4 betas (including both the client and full .NET 4 installs) as well as the other installs that come with VS 2010 (e.g. ASP.NET MVC 2 preview builds, etc).  The uninstalls of the betas/RCs will clean up all the old state on your machine – after which you can install the final VS 2010 version and should have everything just work (this is what I’ve done on all of my machines and I haven’t had any problems). The VS 2010 and .NET 4 installs add a bunch of new managed assemblies to your machine.  Some of these will be “NGEN’d” to native code during the actual install process (making them run fast).  To avoid adding too much time to VS setup, though, we don’t NGEN all assemblies immediately – and instead will NGEN the rest in the background when your machine is idle.  Until it finishes NGENing the assemblies they will be JIT’d to native code the first time they are used in a process – which for large assemblies can sometimes cause a slight performance hit. If you run into this you can manually force all assemblies to be NGEN’d to native code immediately (and not just wait till the machine is idle) by launching the Visual Studio command line prompt from the Windows Start Menu (Microsoft Visual Studio 2010->Visual Studio Tools->Visual Studio Command Prompt).  Within the command prompt type “Ngen executequeueditems” – this will cause everything to be NGEN’d immediately. How to Buy Visual Studio 2010 You can can download and use the free Visual Studio express editions of Visual Web Developer 2010, Visual Basic 2010, Visual C# 2010 and Visual C++.  These express editions are available completely for free (and never time out). You can buy a new copy of VS 2010 Professional that includes a 1 year subscription to MSDN Essentials for $799.  MSDN Essentials includes a developer license of Windows 7 Ultimate, Windows Server 2008 R2 Enterprise, SQL Server 2008 DataCenter R2, and 20 hours of Azure hosting time.  Subscribers also have access to MSDN’s Online Concierge, and Priority Support in MSDN Forums. Upgrade prices from previous releases of Visual Studio are also available.  Existing Visual Studio 2005/2008 Standard customers can upgrade to Visual Studio 2010 Professional for a special $299 retail price until October.  You can take advantage of this VS Standard->Professional upgrade promotion here. Web developers who build applications for others, and who are either independent developers or who work for companies with less than 10 employees, can also optionally take advantage of the Microsoft WebSiteSpark program.  This program gives you three copies of Visual Studio 2010 Professional, 1 copy of Expression Studio, and 4 CPU licenses of both Windows 2008 R2 Web Server and SQL 2008 Web Edition that you can use to both develop and deploy applications with at no cost for 3 years.  At the end of the 3 years there is no obligation to buy anything.  You can sign-up for WebSiteSpark today in under 5 minutes – and immediately have access to the products to download. Summary Today’s release is a big one – and has a bunch of improvements for pretty much every developer.  Thank you everyone who provided feedback, suggestions and reported bugs throughout the development process – we couldn’t have delivered it without you.  Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • Taking advantage of Windows Azure CDN and Dynamic Pages in ASP.NET - Caching content from hosted services

    - by Shawn Cicoria
    With the updates to Windows Azure CDN announced this week [1] I wanted to help illustrate the capability with a working sample that will serve up dynamic content from an ASP.NET site hosted in a WebRole. First, to get a good overview of the capability you can read the Overview of the Windows Azure CDN [2] content on MSDN. When you setup the ability to cache content from a hosted service, the requirement is to provide a path to your role’s DNS endpoint that ends in the path “/cdn”.  Additionally, you then map CDN to that service. What WAZ CDN does, is allow you to then map that through the CDN to your host.  The CDN will then make a request to your host on your client’s behalf. The requirement is still that your client, and any Url’s that are to be serviced through the CDN and this capability have to use the CDN DNS name and not your host – no different than what CDN does for Blog storage. The following 2 URL’s are samples of how the client needs to issue the requests. Windows Azure hosted service URL: http: //myHostedService.cloudapp.net/cdn/music.aspx   - for regular “dynamic” content Windows Azure CDN URL: http: //<identifier>.vo.msecnd.net/music.aspx   - for CDN “cachable” content. The first URL path’s the request direct to your host into the Azure datacenter.  The 2nd URL paths the request through the CDN infrastructure, where CDN will make the determination to request the content on behalf of the client to the Azure datacenter and your host on the /cdn path. The big advantage here is you can apply logic to your content creation.  What’s important is emitting the CDN friendly headers that allow CDN to request and re-request only when you designate based upon it’s rules of “staleness” as described in the overview page. With IIS7.5 there is an underlying issue when the Managed Module “OutputCache” is enabled that in order to emit a good header for your content, you’ll need to remove, and in my sample, helps provide CDN friendly headers.  You get IIS 7.5 when running under OS Family “2” in your service configuration. By default, and when the OutputCache managed module is loaded, if you use the HttpResponse.CachePolicy to set the Http Headers for “max-age” when the HttpCacheability is “Public”, you will NOT get the “max-age” emitted as part of the “Cache-control:” header.  Instead, the OutputCache module will remove “max-age” and just emit “public”.  It works ok when Cacheability is set to “private”. To work around the issue and ensure your code as follows emits the full max-age along with the public option, you need to remove as follows: <system.webServer>   <modules runAllManagedModulesForAllRequests="true">     <remove name="OutputCache"/>   </modules> </system.webServer>   Response.Cache.SetCacheability(HttpCacheability.Public); Response.Cache.SetMaxAge(TimeSpan.FromMinutes(rv));   In the attached solution, the way I approached it was to have a VirtualApplication under the root site that has it’s own web.config  - this VirtualApplication is the /cdn of the site and when deployed to Azure as a Web Role will surface as a distinct IIS Application – along with a separate AppDomain. The CDN Sample is a simple Web Forms site that the /default landing page contains 3 IFrames to host: 1. Content direct from the host @   http://xxxx.cloudapp.net/cdn 2. Content via the CDN @ http://azxxx.vo.msecnd.net  3. Simple list of recent requests – showing where the request came from.   When you run the sample the first time you hit the page, both the Host and the CDN will cause 2 initial requests to hit the host.  You won’t see the first requests in the list because of timing – but if you refresh, you’ll see that the list will show that you have 2 requests initially. 1. sourced direct from the Browser to the HOST 2. sourced via the CDN The picture above shows the call-outs of each of those requests – green rows showing requests coming direct to the HOST, yellow showing the CDN request.  The IP addresses of the green items are direct from the client, where the CDN is from the CDN data center. As you refresh the page (hit Ctrl+F5 to force a full refresh and avoid “304 – not changed”) you’ll see that the request to the HOST get’s processed direct; but the request to the CDN endpoint is serviced direct from the CDN and doesn’t incur any additional request back to the HOST. The following is the Headers from the CDN response (Status-Line) HTTP/1.1 200 OK Age 13 Cache-Control public, max-age=300 Connection keep-alive Content-Length 6212 Content-Type image/jpeg; charset=utf-8 Date Fri, 11 Mar 2011 20:47:14 GMT Expires Fri, 11 Mar 2011 20:52:01 GMT Last-Modified Fri, 11 Mar 2011 20:47:02 GMT Server Microsoft-IIS/7.5 X-AspNet-Version 4.0.30319 X-Powered-By ASP.NET   The following are the Headers from the HOST response (Status-Line) HTTP/1.1 200 OK Cache-Control public, max-age=300 Content-Length 6189 Content-Type image/jpeg; charset=utf-8 Date Fri, 11 Mar 2011 20:47:15 GMT Last-Modified Fri, 11 Mar 2011 20:47:02 GMT Server Microsoft-IIS/7.5 X-AspNet-Version 4.0.30319 X-Powered-By ASP.NET   You can see that with the CDN request, the countdown (age) starts for aging the content. The full sample is located here: CDNSampleSite.zip [1] http://blogs.msdn.com/b/windowsazure/archive/2011/03/09/now-available-updated-windows-azure-sdk-and-windows-azure-management-portal.aspx [2] http://msdn.microsoft.com/en-us/library/ff919703.aspx

    Read the article

  • CodePlex Daily Summary for Thursday, February 24, 2011

    CodePlex Daily Summary for Thursday, February 24, 2011Popular ReleasesInstant Feature Builder for Visual Studio 2010: Instant Feature Builder 1.2: This is the binary version of the Instant Feature Builder. Once downloaded, double click to install into Visual Studio. Version 1.2 fixes: Rename FX to IFB to shorten path lengths Fix issue in ExecuteCommand Fix issue to workaround problem with VS Template writer The Instant Feature Builder is a tool which enables you, via drag-and-drop, to build a specific type of Visual Studio extension (VSIX) known as a Feature Extension. A Feature Extension packages project and/or item templates,...DirectQ: Release 1.8.7 (Beta): Beta release of 1.8.7 to get feedback on what works well, what doesn't work well, and what doesn't work at all. D3D9 hardware with ps2.0 a must. Faster, more streamlined and more integrated rendering capabilities with additional MP features and support.Smartkernel: Smartkernel: ????,??????Chiave File Encryption: Chiave 0.9.1: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Change Log from 0.9 Beta to 0.9.1: ======================= >Added option for system shutdown, sleep, hibernate after operation completed. >Minor Changes to the UI. >Numerous Bug fixes. Feedbacks are Welcome!....DotNetNuke® Store: 03.00.00: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! This version is the same code base as the version 02.01.51 RC, just some cleaning and source code release before submition to the release tracker for "official" release.ClosedXML - The easy way to OpenXML: ClosedXML 0.45.2: New on this release: 1) Added data validation. See Data Validation 2) Deleting or clearing cells deletes the hyperlinks too. New on v0.45.1 1) Fixed issues 6237, 6240 New on v0.45.2 1) Fixed issues 6257, 6266 New Examples Data ValidationOMEGA CMS: OMEGA CMA - Alpha 0.2: A few fixes for OMEGA Framework (DLL) A few tweeks for OMEGA CMSCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.2: New control, Toast Prompt! Removed progress bar since Silverlight Toolkit Feb 2010 has it.Umbraco CMS: Umbraco 4.7: Service release fixing 31 issues. A full changelog will be available with the final stable release of 4.7 Important when upgradingUpgrade as if it was a patch release (update /bin, /umbraco and /umbraco_client). For general upgrade information follow the guide found at http://our.umbraco.org/wiki/install-and-setup/upgrading-an-umbraco-installation 4.7 requires the .NET 4.0 framework Web.Config changes Update the web web.config to include the 4 changes found in (they're clearly marked in...HubbleDotNet - Open source full-text search engine: V1.1.0.0: Add Sqlite3 DBAdapter Add App Report when Query Cache is Collecting. Improve the performance of index through Synchronize. Add top 0 feature so that we can only get count of the result. Improve the score calculating algorithm of match. Let the score of the record that match all items large then others. Add MySql DBAdapter Improve performance for multi-fields sort . Using hash table to access the Payload data. The version before used bin search. Using heap sort instead of qui...Xen: Graphics API for XNA: Xen 2.0: This is the final release of Xen; Xen 2.0. Xen 2.0 supports PC and Xbox 360 running XNA 4. The documentation download is coming soon Due to restrictions in XNA 4, Building Xen requires a DirectX 10 capable video card (Xen applications can still run on Windows Xp and DirectX 9 video cards)Silverlight????[???]: silverlight????[???]2.0: ???????,?????,????????silverlight??????。DBSourceTools: DBSourceTools_1.3.0.0: Release 1.3.0.0 Changed editors from FireEdit to ICSharpCode.TextEditor. Complete re-vamp of Intellisense ( further testing needed). Hightlight Field and Table Names in sql scripts. Added field dropdown on all tables and views in DBExplorer. Added data option for viewing data in Tables. Fixed comment / uncomment bug as reported by tareq. Included Synonyms in scripting engine ( nickt_ch ).IronPython: 2.7 Release Candidate 1: We are pleased to announce the first Release Candidate for IronPython 2.7. This release contains over two dozen bugs fixed in preparation for 2.7 Final. See the release notes for 60193 for details and what has already been fixed in the earlier 2.7 prereleases. - IronPython TeamCaliburn Micro: A Micro-Framework for WPF, Silverlight and WP7: Caliburn.Micro 1.0 RC: This is the official Release Candicate for Caliburn.Micro 1.0. The download contains the binaries, samples and VS templates. VS Templates The templates included are designed for situations where the Caliburn.Micro source needs to be embedded within a single project solution. This was targeted at government and other organizations that expressed specific requirements around using an open source project like this. NuGet This release does not have a corresponding NuGet package. The NuGet pack...Caliburn: A Client Framework for WPF and Silverlight: Caliburn 2.0 RC: This is the official Release Candidate for Caliburn 2.0. It contains all binaries, samples and generated code docs.Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...MiniTwitter: 1.66: MiniTwitter 1.66 ???? ?? ?????????? 2 ??????????????????? User Streams ?????????Windows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...Silverlight Toolkit: Silverlight for Windows Phone Toolkit - Feb 2011: Silverlight for Windows Phone Toolkit OverviewSilverlight for Windows Phone Toolkit offers developers additional controls for Windows Phone application development, designed to match the rich user experience of the Windows Phone 7. Suggestions? Features? Questions? Ask questions in the Create.msdn.com forum. Add bugs or feature requests to the Issue Tracker. Help us shape the Silverlight Toolkit with your feedback! Please clearly indicate that the work items and issues are for the phone t...New ProjectsCompetition Management Platform: Paragliding Competition Management PlatformCS424 B2 Group - Car Management: CS424 B2 Group - Car ManagementEMS: The main aim of the system to perform environment inventorization.EVVA: EVVA ist ein Softwareprojekt zur Unterstützung privater Arbeitsvermittler FileSocialVB: A library to work with the filesocial.com web site and API through VB.NET. This is actually an offshoot of the http://twittervb.codeplex.com project. Though smaller, this will lead to a more compact library.Hash Crack - IGProgram: Hash Crack is a software program for hashes and passwords cracking. Hash Crack use dictionary or set of symbols for hashes cracking, and also support pwdump file format for Windows passwords cracking NTHash MD4. MD2, MD4, MD5, SHA1, SHA256, SHA384, SHA512Imail Spammer Killer: Bots seem to love picking off the weak passwords of IpSwitch IMail v10 users and using SMTP auth to spam the world with their new found account access. This project is a windows service to isolate and stop this activity by disabling the violated user account as it occurs.JVS2USB: Montage permettant de relier une IO ( capcom / Sega ) sur un PC via l'USB !!Library Reminder: Library ReminderMAVI: mobile application for the visually impaired: bill recognition & tag and recognize objects based on a specific stickerMessage splliting without envelope in Biztalk 2009: Message splitting without envelope in Biztalk 2009. The project contains: - Source Code - Examples Article describing how to make it:Microsoft translator: Language translator designed to test Microsoft Translator web service API In Windows Phone 7 developed using Visual Studio 2010 in C#mrmuffin: Mr Muffin WP7 game for childrenNetwork Monitor: Simple application with a vu-meter style display of recent incoming network traffic. - Requires .NET 4, - Requires WinPCap (http://www.winpcap.org/) - Only tested to run under Windows 7NPhysics: NPhysics - Physical Data Types for .NETOpen SimRacing Results: Open SimRacing Results aims to provide an open standard for race results of PC SimRacing games (like iRacing, rFactor, NR2003, ...), allowing developers of league management systems to use a unique interface to get the results from, regardless of the simulation used.Orchard Image Gallery: Orchard Image Gallery project is intented to provide a Image Gallery content part and/or widget for the Orchard Project.Planning Poker for Windows Phone 7: Play planning poker on your Windows Phone 7.Publishing and consuming WCF in Biztalk 2009 and Visual Studio 2008: The file contains: Biztalk 2009 Project, C# Console Project, Example. Push Notification for Windows Phone 7 in php: WindowsPhonePushNotification enables you to use Microsoft Push Notification Service in phpQuksace Agjke: For more information, please visit <http://students.cs.tamu.edu/abe/IS_and_R/HW3/quksace%20agjke.html>. http://students.cs.tamu.edu/abe/IS_and_R/HW3/quksace%20agjke.html Read: a "GNU Make"-like utility for viewing Readme files: Read is a simple program to easily load and read README files on a UNIX-compliant system. It works in a similar way to GNU Make by searching a directory for a compatible file, in this case a Readme file, and loading it for reading using a text editor or viewer.SQL CE 3.5 persistence mapper for ECO IV: May need some adjustments for ECO V/VI, definitely needs some rewrite to support SQL CE 4.0 fullySQL Server Job Failure Notification System: A simple means of ensuring you know when SQLAgent jobs fail.SuperQuery: SuperQuery makes it easy to run the same batch of SQL across several databases on different SQL servers. SuperQuery supports all editions and versions of SQL Server from 2000 onwards. It is developed in C# using .NET 4 Client Profile.System.Net.Mail Extended: An Extension to the System.Net.Mail Namespace, adding a POP3 Client, Enhanced SMTP Client, IMAP Client, POP3 Server, SMTP Server, and IMAP Serve, all written in Visual C#.wow-combatlogs: A PowerShell module for working with combat logs generated by World of Warcraft.WPF UndoManager: WPF UndoManager provides a simple Undomanager on the base of WPF's CommandPattern. It use an implementation of the ICommand-interface to manage a history of actions.XO / TicTacToe game: Dynamic sized XO / TicTacToe game for Windows Phone 7 Build using Visual Studio 2010 and C#

    Read the article

  • Connection Pooling is Busted

    - by MightyZot
    A few weeks ago we started getting complaints about performance in an application that has performed very well for many years.  The application is a n-tier application that uses ADODB with the SQLOLEDB provider to talk to a SQL Server database.  Our object model is written in such a way that each public method validates security before performing requested actions, so there is a significant number of queries executed to get information about file cabinets, retrieve images, create workflows, etc.  (PaperWise is a document management and workflow system.)  A common factor for these customers is that they have remote offices connected via MPLS networks. Naturally, the first thing we looked at was the query performance in SQL Profiler.  All of the queries were executing within expected timeframes, most of them were so fast that the duration in SQL Profiler was zero.  After getting nowhere with SQL Profiler, the situation was escalated to me.  I decided to take a peek with Process Monitor.  Procmon revealed some “gaps” in the TCP/IP traffic.  There were notable delays between send and receive pairs.  The send and receive pairs themselves were quite snappy, but quite often there was a notable delay between a receive and the next send.  You might expect some delay because, presumably, the application is doing some thinking in-between the pairs.  But, comparing the procmon data at the remote locations with the procmon data for workstations on the local network showed that the remote workstations were significantly delayed.  Procmon also showed a high number of disconnects. Wireshark traces showed that connections to the database were taking between 75ms and 150ms.  Not only that, but connections to a file share containing images were taking 2 seconds!  So, I asked about a trust.  Sure enough there was a trust between two domains and the file share was on the second domain.  Joining a remote workstation to the domain hosting the share containing images alleviated the time delay in accessing the file share.  Removing the trust had no affect on the connections to the database. Microsoft Network Monitor includes filters that parse TDS packets.  TDS is the protocol that SQL Server uses to communicate.  There is a certificate exchange and some SSL that occurs during authentication.  All of this was evident in the network traffic.  After staring at the network traffic for a while, and examining packets, I decided to call it a night.  On the way home that night, something about the traffic kept nagging at me.  Then it dawned on me…at the beginning of the dance of packets between the client and the server all was well.  Connection pooling was working and I could see multiple queries getting executed on the same connection and ethereal port.  After a particular query, connecting to two different servers, I noticed that ADODB and SQLOLEDB started making repeated connections to the database on different ethereal ports.  SQL Server would execute a single query and respond on a port, then open a new port and execute the next query.  Connection pooling appeared to be broken. The next morning I wrote a test to confirm my hypothesis.  Turns out that the sequence causing the connection nastiness goes something like this: Make a connection to the database. Open a result set that returns enough records to require multiple roundtrips to the server. For each result, query for some other data in the database (this will open a new implicit connection.) Close the inner result set and repeat for every item in the original result set. Close the original connection. Provided that the first result set returns enough data to require multiple roundtrips to the server, ADODB and SQLOLEDB will start making new connections to the database for each query executed in the loop.  Originally, I thought this might be due to Microsoft’s denial of service (ddos) attack protection.  After turning those features off to no avail, I eventually thought to switch my queries to client-side cursors instead of server-side cursors.  Server-side cursors are the default, by the way.  Voila!  After switching to client-side cursors, the disconnects were gone and the above sequence yielded two connections as expected. While the real problem is the amount of time it takes to make connections over these MPLS networks (100ms on average), switching to client-side cursors made the problem go away.  Believe it or not, this is actually documented by Microsoft, and rather difficult to find.  (At least it was while we were trying to troubleshoot the problem!)  So, if you’re noticing performance issues on slower networks, or networks with slower switching, take a look at the traffic in a tool like Microsoft Network Monitor.  If you notice a high number of disconnects, and you’re using fire-hose or server-side cursors, then try switching to client-side cursors and you may see the problem go away. Most likely, Microsoft believes this to be appropriate behavior, because ADODB can’t guarantee that all of the data has been retrieved when you execute the inner queries.  I’m not convinced, though, because the problem remains even after replacing all of the implicit connections with explicit connections and closing those connections in-between each of the inner queries.  In that case, there doesn’t seem to be a reason why ADODB can’t use a single connection from the connection pool to make the additional queries, bringing the total number of connections to two.  Instead ADO appears to make an assumption about the state of the connection. I’ve reported the behavior to Microsoft and am awaiting to hear from the appropriate team, so that I can demonstrate the problem.  Maybe they can explain to us why this is appropriate behavior.  :)

    Read the article

  • TDD and WCF behavior

    - by Frederic Hautecoeur
    Some weeks ago I wanted to develop a WCF behavior using TDD. I have lost some time trying to use mocks. After a while i decided to just use a host and a client. I don’t like this approach but so far I haven’t found a good and fast solution to use Unit Test for testing a WCF behavior. To Implement my solution I had to : Create a Dummy Service Definition; Create the Dummy Service Implementation; Create a host; Create a client in my test; Create and Add the behavior; Dummy Service Definition This is just a simple service, composed of an Interface and a simple implementation. The structure is aimed to be easily customizable for my future needs.   Using Clauses : 1: using System.Runtime.Serialization; 2: using System.ServiceModel; 3: using System.ServiceModel.Channels; The DataContract: 1: [DataContract()] 2: public class MyMessage 3: { 4: [DataMember()] 5: public string MessageString; 6: } The request MessageContract: 1: [MessageContract()] 2: public class RequestMessage 3: { 4: [MessageHeader(Name = "MyHeader", Namespace = "http://dummyservice/header", Relay = true)] 5: public string myHeader; 6:  7: [MessageBodyMember()] 8: public MyMessage myRequest; 9: } The response MessageContract: 1: [MessageContract()] 2: public class ResponseMessage 3: { 4: [MessageHeader(Name = "MyHeader", Namespace = "http://dummyservice/header", Relay = true)] 5: public string myHeader; 6:  7: [MessageBodyMember()] 8: public MyMessage myResponse; 9: } The ServiceContract: 1: [ServiceContract(Name="DummyService", Namespace="http://dummyservice",SessionMode=SessionMode.Allowed )] 2: interface IDummyService 3: { 4: [OperationContract(Action="Perform", IsOneWay=false, ProtectionLevel=System.Net.Security.ProtectionLevel.None )] 5: ResponseMessage DoThis(RequestMessage request); 6: } Dummy Service Implementation 1: public class DummyService:IDummyService 2: { 3: #region IDummyService Members 4: public ResponseMessage DoThis(RequestMessage request) 5: { 6: ResponseMessage response = new ResponseMessage(); 7: response.myHeader = "Response"; 8: response.myResponse = new MyMessage(); 9: response.myResponse.MessageString = 10: string.Format("Header:<{0}> and Request was <{1}>", 11: request.myHeader, request.myRequest.MessageString); 12: return response; 13: } 14: #endregion 15: } Host Creation The most simple host implementation using a Named Pipe binding. The GetBinding method will create a binding for the host and can be used to create the same binding for the client. 1: public static class TestHost 2: { 3: 4: internal static string hostUri = "net.pipe://localhost/dummy"; 5:  6: // Create Host method. 7: internal static ServiceHost CreateHost() 8: { 9: ServiceHost host = new ServiceHost(typeof(DummyService)); 10:  11: // Creating Endpoint 12: Uri namedPipeAddress = new Uri(hostUri); 13: host.AddServiceEndpoint(typeof(IDummyService), GetBinding(), namedPipeAddress); 14:  15: return host; 16: } 17:  18: // Binding Creation method. 19: internal static Binding GetBinding() 20: { 21: NamedPipeTransportBindingElement namedPipeTransport = new NamedPipeTransportBindingElement(); 22: TextMessageEncodingBindingElement textEncoding = new TextMessageEncodingBindingElement(); 23:  24: return new CustomBinding(textEncoding, namedPipeTransport); 25: } 26:  27: // Close Method. 28: internal static void Close(ServiceHost host) 29: { 30: if (null != host) 31: { 32: host.Close(); 33: host = null; 34: } 35: } 36: } Checking the service A simple test tool check the plumbing. 1: [TestMethod] 2: public void TestService() 3: { 4: using (ServiceHost host = TestHost.CreateHost()) 5: { 6: host.Open(); 7:  8: using (ChannelFactory<IDummyService> channel = 9: new ChannelFactory<IDummyService>(TestHost.GetBinding() 10: , new EndpointAddress(TestHost.hostUri))) 11: { 12: IDummyService svc = channel.CreateChannel(); 13: try 14: { 15: RequestMessage request = new RequestMessage(); 16: request.myHeader = Guid.NewGuid().ToString(); 17: request.myRequest = new MyMessage(); 18: request.myRequest.MessageString = "I want some beer."; 19:  20: ResponseMessage response = svc.DoThis(request); 21: } 22: catch (Exception ex) 23: { 24: Assert.Fail(ex.Message); 25: } 26: } 27: host.Close(); 28: } 29: } Running the service should show that the client and the host are running fine. So far so good. Adding the Behavior Add a reference to the Behavior project and add the using entry in the test class. We just need to add the behavior to the service host : 1: [TestMethod] 2: public void TestService() 3: { 4: using (ServiceHost host = TestHost.CreateHost()) 5: { 6: host.Description.Behaviors.Add(new MyBehavior()); 7: host.Open();¨ 8: …  If you set a breakpoint in your behavior and run the test in debug mode, you will hit the breakpoint. In this case I used a ServiceBehavior. To add an Endpoint behavior you have to add it to the endpoints. 1: host.Description.Endpoints[0].Behaviors.Add(new MyEndpointBehavior()) To add a contract or an operation behavior a custom attribute should work on the service contract definition. I haven’t tried that yet.   All the code provided in this blog and in the following files are for sample use. Improvements I don’t like to instantiate a client and a service to test my behaviors. But so far I have' not found an easy way to do it. Today I am passing a type of endpoint to the host creator and it creates the right binding type. This allows me to easily switch between bindings at will. I have used the same approach to test Mex Endpoints, another post should come later for this. Enjoy !

    Read the article

  • CodePlex Daily Summary for Saturday, April 07, 2012

    CodePlex Daily Summary for Saturday, April 07, 2012Popular ReleasesHarness - Internet Explorer Automation: Harness 2.0.3: support the operation fo frameset, frame and iframe Add commands SwitchFrame GetUrl GoBack GoForward Refresh SetTimeout GetTimeout Rename commands GetActiveWindow to GetActiveBrowser SetActiveWindow to SetActiveBrowser FindWindowAll to FindBrowser NewWindow to NewBrowser GetMajorVersion to GetVersionBetter Explorer: Better Explorer 2.0.0.861 Alpha: - fixed new folder button operation not work well in some situations - removed some unnecessary code like subclassing that is not needed anymore - Added option to make Better Exlorer default (at least for WIN+E operations) - Added option to enable file operation replacements (like Terracopy) to work with Better Explorer - Added some basic usability to "Share" button - Other fixesLightFarsiDictionary - ??????? ??? ?????/???????: LightFarsiDictionary - v1: LightFarsiDictionary - v1WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.3: Version: 2.5.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete [O] WAF: Mark the StringBuilderExtensions class as obsolete because the AppendInNewLine method can be replaced with string.Jo...RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.30: changes NEW: Added Support for "DirectUpload.net" links NEW: Added Support for "PixRoute.com" links NEW: Added Support for "ImagePicasa.com" links FIXED: "PixHub.eu" linksCommunity TFS Build Extensions: April 2012: Release notes to follow...ClosedXML - The easy way to OpenXML: ClosedXML 0.65.2: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon sets New on v0.65.2 Fixed issue loading conditional formatting Improved inserts performanceLiberty: v3.2.0.0 Release 4th April 2012: Change Log-Added -Halo 3 support (invincibility, ammo editing) -Halo 3: ODST support (invincibility, ammo editing) -The file transfer page now shows its progress in the Windows 7 taskbar -"About this build" settings page -Reach Change what an object is carrying -Reach Change which node a carried object is attached to -Reach Object node viewer and exporter -Reach Change which weapons you are carrying from the object editor -Reach Edit the weapon controller of vehicles and turrets -An error dia...MSBuild Extension Pack: April 2012: Release Blog Post The MSBuild Extension Pack April 2012 release provides a collection of over 435 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUID’...DotNetNuke® Community Edition CMS: 06.01.05: Major Highlights Fixed issue that stopped users from creating vocabularies when the portal ID was not zero Fixed issue that caused modules configured to be displayed on all pages to be added to the wrong container in new pages Fixed page quota restriction issue in the Ribbon Bar Removed restriction that would not allow users to use a dash in page names. Now users can create pages with names like "site-map" Fixed issue that was causing the wrong container to be loaded in modules wh...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.3.1: One Click Install from NuGet Changes to Version 2.1.3.11. [assembly: AllowPartiallyTrustedCallers] has been added back into the AssemblyInfo.cs file to prevent failures with other assemblies in Medium trust environments. 2. The Lite data embedded into the assembly has been updated to include devices from December 2011. The 42 new RingMark properties will return Unknown if RingMark data is not available. Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla...MVC Controls Toolkit: Mvc Controls Toolkit 2.0.0: Added Support for Mvc4 beta and WebApi The SafeqQuery and HttpSafeQuery IQueryable implementations that works as wrappers aroung any IQueryable to protect it from unwished queries. "Client Side" pager specialized in paging javascript data coming either from a remote data source, or from local data. LinQ like fluent javascript api to build queries either against remote data sources, or against local javascript data, with exactly the same interface. There are 3 different query objects exp...ExtAspNet: ExtAspNet v3.1.2: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://extasp.net/ ??:http://bbs.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-04-04 v3.1.2 -??IE?????????????BUG(??"about:blank"?...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.50: Highlight features & improvements: • Significant performance optimization. • Allow store owners to create several shipments per order. Added a new shipping status: “Partially shipped”. • Pre-order support added. Enables your customers to place a Pre-Order and pay for the item in advance. Displays “Pre-order” button instead of “Buy Now” on the appropriate pages. Makes it possible for customer to buy available goods and Pre-Order items during one session. It can be managed on a product variant ...WiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryDocument.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.New ProjectsAdvertising Management: Ph?n m?m qu?n lý qu?ng cáoAgile Compact Database: It is database for all. AssemblyTransformer: AssemblyTransformer is a tool for modifying .NET assemblies using Mono Cecil. It handles the entire transformation process including strong name signing and offers a simple command-line interface and a basic framework for creating and configuring specific transformations.Cafe For You: Ph?n m?m gi?i thi?u và qu?n lý quán cafeClient-side Templated Script Control: Allows a developer to add a repeater-style templated list control to a web page that will be data bound client-side, and may respond to client events. The control may be data bound by a web service call on initialization, and may also have it's data source set via client code.CRM Project - Beginner Sample: Sample to help beginners to start in C# development. Ejemplo para ayudar a quienes inician con el desarrollo en C#.Deployment Made Easy: The goal of this project is to make deployments to windows servers easy using the web deployment toolEasyCMS: EasyCMSExcel to SQL Server Database Bulk Transfer: Quick and simple WPF tool to allow users export data from an Excel spreadsheet to a SQL Server database table. Provided as is. But if you need any help let me know. HTML Client demo for WCF RIA Services: Demo application with HTML client (upshot.js + knockout.js) on WCF RIA ServicesKOI: Kinect Open Interface: Kinect Open Interface, KOI, provides a way to detect and have the user confirm 11 gestures for your UI. Please read my blog for info: http://www.kinecthelp.com/2012/04/koi-kinect-open-interface.htmlLazyWinAdmin: LazyWinAdmin is a Powershell script to manage local or remote machine ressources.LCDSmartie dll to display Audio spectrum on Windows 7: An LCDSmartie plugin that displays anything being played as an audio spectrum.LiveHelpChatApp: With Live chat help you can provide online / Offline help to your client it has facebook style chat for online and offline users Download and EnjoyMailSender: Small tool for sending mail messages contains multiple attachements with sum size bigger than allowed size. You can drag'n'drop attachments and click send - application split all attachments to parts and sent it separately. There is not address book yet. Mauricio: Mauricio Lima PageMiddleware and Enterprise services foundation: Define a model of deployment and management for Middleware and enterprise applicationsMyFirstPro: This is a test projOld Games Launcher: Old Games Launcher is a combined DosBox frontend & a Direct Draw game/application starter.Pharmakos Studio: Pharmakos Studio is an extensible IDE. It was originally written specifically as an UnrealScript editor for the UDK, however it is being written so that any language can be supported via plugins.Proyecto Eclipse-Android: Proyectos con Eclipse-AdroidProyectos II: Proyecto para Farmaciapullsource: pull source directsource filterQuizzer: Awesome program for quizzes and tests.Solution Settings for Visual Studio: Solution Settings for Visual Studio allows a file containing settings such as formatting, fonts and colors to be included with a project. When the solution is opened, these settings are automatically applied, and when it is closed, the changes are reverted.sundance: test test testWebcomic Reader: A little Idea for an on-, and offline usable, touch-friendly Windows 7 Webcomic Reader.WinRT PathTextBlock: WinRT PathTextBlock is a control that overcomes some of the limitations in the built in WinRT TextBlock, such as not being able to outline the text, and not being able to distort the text, for example to draw it along a circle. Previously, you could use a tool like Expression Design to create the text and export it as a Path, but this wouldn't work for text that needed to be specified at run time. This control allows you to specify the Text property and it will generate the proper Path obj...Yaplex open source projects: Yaplex open source projects????API SDK-VB6(oauth2): ????API SDK-VB6(oauth2)????????API SDK VB6: ??????????API SDK vb?

    Read the article

  • SQL SERVER – SSIS Parameters in Parent-Child ETL Architectures – Notes from the Field #040

    - by Pinal Dave
    [Notes from Pinal]: SSIS is very well explored subject, however, there are so many interesting elements when we read, we learn something new. A similar concept has been Parent-Child ETL architecture’s relationship in SSIS. Linchpin People are database coaches and wellness experts for a data driven world. In this 40th episode of the Notes from the Fields series database expert Tim Mitchell (partner at Linchpin People) shares very interesting conversation related to how to understand SSIS Parameters in Parent-Child ETL Architectures. In this brief Notes from the Field post, I will review the use of SSIS parameters in parent-child ETL architectures. A very common design pattern used in SQL Server Integration Services is one I call the parent-child pattern.  Simply put, this is a pattern in which packages are executed by other packages.  An ETL infrastructure built using small, single-purpose packages is very often easier to develop, debug, and troubleshoot than large, monolithic packages.  For a more in-depth look at parent-child architectures, check out my earlier blog post on this topic. When using the parent-child design pattern, you will frequently need to pass values from the calling (parent) package to the called (child) package.  In older versions of SSIS, this process was possible but not necessarily simple.  When using SSIS 2005 or 2008, or even when using SSIS 2012 or 2014 in package deployment mode, you would have to create package configurations to pass values from parent to child packages.  Package configurations, while effective, were not the easiest tool to work with.  Fortunately, starting with SSIS in SQL Server 2012, you can now use package parameters for this purpose. In the example I will use for this demonstration, I’ll create two packages: one intended for use as a child package, and the other configured to execute said child package.  In the parent package I’m going to build a for each loop container in SSIS, and use package parameters to pass in a value – specifically, a ClientID – for each iteration of the loop.  The child package will be executed from within the for each loop, and will create one output file for each client, with the source query and filename dependent on the ClientID received from the parent package. Configuring the Child and Parent Packages When you create a new package, you’ll see the Parameters tab at the package level.  Clicking over to that tab allows you to add, edit, or delete package parameters. As shown above, the sample package has two parameters.  Note that I’ve set the name, data type, and default value for each of these.  Also note the column entitled Required: this allows me to specify whether the parameter value is optional (the default behavior) or required for package execution.  In this example, I have one parameter that is required, and the other is not. Let’s shift over to the parent package briefly, and demonstrate how to supply values to these parameters in the child package.  Using the execute package task, you can easily map variable values in the parent package to parameters in the child package. The execute package task in the parent package, shown above, has the variable vThisClient from the parent package mapped to the pClientID parameter shown earlier in the child package.  Note that there is no value mapped to the child package parameter named pOutputFolder.  Since this parameter has the Required property set to False, we don’t have to specify a value for it, which will cause that parameter to use the default value we supplied when designing the child pacakge. The last step in the parent package is to create the for each loop container I mentioned earlier, and place the execute package task inside it.  I’m using an object variable to store the distinct client ID values, and I use that as the iterator for the loop (I describe how to do this more in depth here).  For each iteration of the loop, a different client ID value will be passed into the child package parameter. The final step is to configure the child package to actually do something meaningful with the parameter values passed into it.  In this case, I’ve modified the OleDB source query to use the pClientID value in the WHERE clause of the query to restrict results for each iteration to a single client’s data.  Additionally, I’ll use both the pClientID and pOutputFolder parameters to dynamically build the output filename. As shown, the pClientID is used in the WHERE clause, so we only get the current client’s invoices for each iteration of the loop. For the flat file connection, I’m setting the Connection String property using an expression that engages both of the parameters for this package, as shown above. Parting Thoughts There are many uses for package parameters beyond a simple parent-child design pattern.  For example, you can create standalone packages (those not intended to be used as a child package) and still use parameters.  Parameter values may be supplied to a package directly at runtime by a SQL Server Agent job, through the command line (via dtexec.exe), or through T-SQL. Also, you can also have project parameters as well as package parameters.  Project parameters work in much the same way as package parameters, but the parameters apply to all packages in a project, not just a single package. Conclusion Of the numerous advantages of using catalog deployment model in SSIS 2012 and beyond, package parameters are near the top of the list.  Parameters allow you to easily share values from parent to child packages, enabling more dynamic behavior and better code encapsulation. If you want me to take a look at your server and its settings, or if your server is facing any issue we can Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff)

    - by jamiet
    Recently I noticed a tweet from notable SQL Server author and community dude-at-large Steve Jones in which he asked how many SQL Server developers were putting their SQL Server source code (i.e. DDL) under source control (I’m paraphrasing because I can’t remember the exact tweet and Twitter’s search functionality is useless). The question surprised me slightly as I thought a more pertinent question would be “how many SQL Server developers are not using source control?” because I have been doing just that for many years now and I simply assumed that use of source control is a given in this day and age. Then I started thinking about it. “Perhaps I’m wrong” I pondered, “perhaps the SQL Server folks that do use source control in their day-to-day jobs are in the minority”. So, dear reader, I’m interested to know a little bit more about your use of source control. Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? To encourage you to contribute I have five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect to give away to what I consider to be the five best replies (“best” is totally subjective of course but this is my blog so my decision is final ), if you want to be considered don’t forget to leave contact details; email address, Twitter handle or similar will do. To start you off and to perhaps get the brain cells whirring, here are my answers to the questions above: Are you putting your SQL Server code into a source control system? As I think I’ve already said…yes. Always. If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? I move around a lot between many clients so it changes on a fairly regular basis; my current client uses Team Foundation Server (aka TFS) and as part of a separate project is trialing the use of Team Foundation Service. I have used SVN extensively in the past which I am a fan of (I generally prefer it to TFS) and am trying to get my head around Git by using it for ObjectStorageHelper. What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? On my current project, Team Explorer. In the past I have used Tortoise to connect to SVN. Why did you make those particular software choices? I generally use whatever the client uses and given that I work with SQL Server I find that the majority of my clients use TFS, I guess simply because they are Microsoft development shops. Any interesting anecdotes to share in regard to your use of source control and SQL Server? Not an anecdote as such but I am going to share some frustrations about TFS. In many ways TFS is a great product because it integrates many separate functions (source control, work item tracking, build agents) into one whole and I’m firmly of the opinion that that is a good thing if for no reason other than being able to associate your check-ins with a work-item. However, like many people there are aspects to TFS source control that annoy me day-in, day-out. Chief among them has to be the fact that it uses a file’s read-only property to determine if a file should be checked-out or not and, if it determines that it should, it will happily do that check-out on your behalf without you even asking it to. I didn’t realise how ridiculous this was until I first used SVN about three years ago – with SVN you make any changes you wish and then use your source control client to determine which files have changed and thus be checked-in; the notion of “check-out” doesn’t even exist. That sounds like a small thing but you don’t realise how liberating it is until you actually start working that way. Hoping to hear some more anecdotes and opinions in the comments. Remember….free software is up for grabs! @jamiet 

    Read the article

  • How to Use Steam In-Home Streaming

    - by Chris Hoffman
    Steam’s In-Home Streaming is now available to everyone, allowing you to stream PC games from one PC to another PC on the same local network. Use your gaming PC to power your laptops and home theater system. This feature doesn’t allow you to stream games over the Internet, only the same local network. Even if you tricked Steam, you probably wouldn’t get good streaming performance over the Internet. Why Stream? When you use Steam In-Home streaming, one PC sends its video and audio to another PC. The other PC views the video and audio like it’s watching a movie, sending back mouse, keyboard, and controller input to the other PC. This allows you to have a fast gaming PC power your gaming experience on slower PCs. For example, you could play graphically demanding games on a laptop in another room of your house, even if that laptop has slower integrated graphics. You could connect a slower PC to your television and use your gaming PC without hauling it into a different room in your house. Streaming also enables cross-platform compatibility. You could have a Windows gaming PC and stream games to a Mac or Linux system. This will be Valve’s official solution for compatibility with old Windows-only games on the Linux (Steam OS) Steam Machines arriving later this year. NVIDIA offers their own game streaming solution, but it requires certain NVIDIA graphics hardware and can only stream to an NVIDIA Shield device. How to Get Started In-Home Streaming is simple to use and doesn’t require any complex configuration — or any configuration, really. First, log into the Steam program on a Windows PC. This should ideally be a powerful gaming PC with a powerful CPU and fast graphics hardware. Install the games you want to stream if you haven’t already — you’ll be streaming from your PC, not from Valve’s servers. (Valve will eventually allow you to stream games from Mac OS X, Linux, and Steam OS systems, but that feature isn’t yet available. You can still stream games to these other operating systems.) Next, log into Steam on another computer on the same network with the same Steam username. Both computers have to be on the same subnet of the same local network. You’ll see the games installed on your other PC in the Steam client’s library. Click the Stream button to start streaming a game from your other PC. The game will launch on your host PC, and it will send its audio and video to the PC in front of you. Your input on the client will be sent back to the server. Be sure to update Steam on both computers if you don’t see this feature. Use the Steam > Check for Updates option within Steam and install the latest update. Updating to the latest graphics drivers for your computer’s hardware is always a good idea, too. Improving Performance Here’s what Valve recommends for good streaming performance: Host PC: A quad-core CPU for the computer running the game, minimum. The computer needs enough processor power to run the game, compress the video and audio, and send it over the network with low latency. Streaming Client: A GPU that supports hardware-accelerated H.264 decoding on the client PC. This hardware is included on all recent laptops and PCs. Ifyou have an older PC or netbook, it may not be able to decode the video stream quickly enough. Network Hardware: A wired network connection is ideal. You may have success with wireless N or AC networks with good signals, but this isn’t guaranteed. Game Settings: While streaming a game, visit the game’s setting screen and lower the resolution or turn off VSync to speed things up. In-Home Steaming Settings: On the host PC, click Steam > Settings and select In-Home Streaming to view the In-Home Streaming settings. You can modify your streaming settings to improve performance and reduce latency. Feel free to experiment with the options here and see how they affect performance — they should be self-explanatory. Check Valve’s In-Home Streaming documentation for troubleshooting information. You can also try streaming non-Steam games. Click Games > Add a Non-Steam Game to My Library on your host PC and add a PC game you have installed elsewhere on your system. You can then try streaming it from your client PC. Valve says this “may work but is not officially supported.” Image Credit: Robert Couse-Baker on Flickr, Milestoned on Flickr

    Read the article

  • CodePlex Daily Summary for Thursday, March 22, 2012

    CodePlex Daily Summary for Thursday, March 22, 2012Popular ReleasesTelerik CAB Enabling Kit for RadControls for WinForms: TCEK 2012.1.321.20: major update, new Workspaces and UIAdapters Workspaces: - RadDockWorkspace - RadPageViewWorkspace - RadFormWorkspace - RadFormMdiWorkspace - RadTabbedMdiWorkspace UI Adapters: - RadCommandBarUIAdapter - RadRibbonBarUIAdapter - RadTreeNodeUiAdapter - RadTreeViewUIAdapter - RadItemCollectionUIAdapter - (RadMenu, RadStatusStrip, all controls that support RadItem collections)People's Note: People's Note 0.40: Version 0.40 adds an option to compact the database from the profile screen. Compacting a database can make it smaller and faster by removing empty spaces left over by editing, moving, and deleting notes. To install: copy the appropriate CAB file onto your WM device and run it.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 13: 1. added logic fault checking in analysis. automatically detect dead loop or memory leakage in stored procedures, for details please refer to http://sqlmon.codeplex.com/workitem/32469WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Metodología General Ajustada - MGA: 02.02.01: Cambios John: Se actualizan los seis formularios de Identificaciòn para que despuès de guardar actualice las grillas, de tal manera que no se dupliquen los registros al guardar. Se genera instalador con los cambios y se actualiza la base datos con ùltimos cambios en el SP de Flujo de Caja.xyzzy+: xyzzy+ 0.2.2.235+0: SHA1: 4a0258736e7df52bb6e2304178b7fcf02414ae17 PrerequisitesMicrosoft Visual C++ 2010 SP1 Redistributable Package (x86) (ja) FeaturesUnicode Visual Style Known ProblemsCharacter encodings other than Shift_JIS and UTF-X may be broken. Functions related to character encodings may not work. (ex. iso-code-char)Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...AppBarUtils for Windows Phone SDK 7.1: AppBarUtils 1.2: This release contains IconUri dependency property for both AppBarItemCommand and AppBarItemTrigger as requested by shawnoster at http://appbarutils.codeplex.com/discussions/321745. When using this IconUri dependency property, please be sure to set the Type property to AppBarItemType.Button or just omit this property entirely, because it is only for app bar icon button. The demo has been updated to show how to use this new IconUri dependency property with a new lock button on the app bar. Wh...Offline Navigation for Windows Phone 7: 0.1 Alpha: This is the 0.1 alpha release of source code.SmartNet: V1.0.0.0: DY SmartNet ?????? V1.0Javascript .NET: Javascript .NET v0.6: Upgraded to the latest stable branch of v8 (/tags/3.9.18), and switched to using their scons build system. We no longer include v8 source code as part of this project's source code. Simultaneous multithreaded use of v8 now supported (v8 Isolates), although different contexts may not share objects or call each other. 64-bit .Net 4.0 DLL now included. (Download now includes x86 and x64 for both .Net 3.5 and .Net 4.0.)MyRouter (Virtual WiFi Router): MyRouter 1.0.7: This release should be more stable there were a few bug fixes including the x64 issue as well as an error popping up when MyRouter started this was caused by a NULL valueNew ProjectsActivities.WMI: WF4 ?????? WMI ??????????????? Activities library related WMI, available in WF4Append Customisation Service: A lightweight windows service for applying customisations to enterprise webapps: monitors a file and makes sure your code is always appended to the end of the file. Disable the service, and your customisations go away. c# .net 4. Useful for customising branding/design, javascript, css and so on - in applications such as Dynamics CRM 2011.ASP.NET Security Module: Modulo de seguridad para aplicaciones Web asp.netavgdx: This project is just for Directx 11 learningDaabli: A lightweight C# version of the Daabli serialization framework for C++. If your application needs to load objects and data from human readable text files, then Daabli could be useful to you. It is designed to be as easy to use as possible and works with a 'C' style human editable format. The original C++ version is available here: http://daabli.sourceforge.net/ DNN Simple Tweet: DNN Simple Tweet is a simple DotNetNuke module for display of Twitter Feeds. Using the stock Twitter Profile Widget, its settings allow you to change the Twitter User name, Tweet colors, etc. Developed in VB. DNN version 6 and higher required. *NUISANCE* When selecting between "Display All" and "Timed Interval" for Twitter Behavior, the iColorPicker for the colors will disappear. This is due to the post-back which is occurring and the use of Javascript of the color picker. Updat...Don't We-KC and Sway: Don't We-KC and SwayEksponent CropUp: CropUp is a simple geometric algorithm for "weighted auto cropping". A focus point and optional "area of interest" are defined (e.g. a face in a group pictures). These are shown instead of random stomachs when the picture needs to be sized to a specific format. Umbraco package.Enterprise Modular Application: Guidelines to create Enterprise modular applications in .NET framework, independent of any specific framework.Escape From Canyon: Escape from canyon is a little game project (for academic purpose only) developed using XNA 4.0 and F#FIX Sample code using QuickFIX to connect to TT FIX Adapter: Sample FIX client provides a starting place for developers to connect to the TT FIX Adapter. It's developed in C# using QuickFIX as the FIX engine.FSGreeNetWork: FSGreeNetWorkGac Library -- C++ Utilities for GPU Accelerated GUI and Script: C++ Utilities for GPU Accelerated GUI and ScriptJhVirtualKeyboard for WPF and Silverlight: JhVirtualKeyboard is a virtual-keyboard for software developers to use with either WPF or Silverlight projects. With it - you now have a simple way to provide your users with the ability to enter characters in different languages and alphabets, or any Unicode character. Developed in C#, using Visual Studio 2010 and .NET 4 More information can be found on my blog article at: http://designforge.wordpress.com/2011/01/06/jhvirtualkeyboard/ by James W. HurstKrishaWeb: Krisha webNetFrameworkExtensions: Simple plain framework to add a lot of features to .NET framework core. Most of the features are added in form of extension methods.pav2: proyecto pav 2 SharePoint (2010) Connected Server: Display which web server a user is connected to in the Personal Actions drop down menu (user name in upper right). An extremely useful aid when troubleshooting issues in a multi-server SharePoint environment. I took the exisiting version which ran on MOSS 2007 and rebuilt it to run on SharePoint 2010. <b>Acknowledgements:</b> Full credit goes to Nathan Yorke for the original project http://spconnectedserver.codeplex.com which worked on MOSS 2007. SharePoint 2010 Gauge Web Part: SharePoint 2010 Gauge Web Part can be connected to any column of the “number” type in SharePoint list includes External Lists (only the farm solution version) and show calculations on column values. It supports 2 views: 1. The Gauge View 2. The Simple Indicator View SMTP Test Suite: SMTP server/client that can be used to test other servers/clients. Purely a test tool as most SMTP verbs are accepted without any checking.StarterCSS: StarterCorev4.css is inspired from Starter.master. This CSS file give you detailed explanation on the different class files on corev4.css. StarterCorev4.css will make you understand the purpose of each class files when you do ctrl + click on your master page css class.Triangle.NET: Triangle.NET is a 2D meshing software written in C#. It generates (constrained) Delaunay triangulations and quality meshes of point sets or planar straight line graphs. It is a port of Jonathan Shewchuk's Triangle software written in C.WorkFile: workfile about codeioXNA Electric Effect: An electric effect implemented using XNA 4 fro Windows Phone 7. It provides an easy way to configure settings to create realistic electric effects, lightening effects, etc.

    Read the article

  • Guidance: How to layout you files for an Ideal Solution

    - by Martin Hinshelwood
    Creating a solution and having it maintainable over time is an art and not a science. I like being pedantic and having a place for everything, no matter how small. For setting up the Areas to run Multiple projects under one solution see my post on  When should I use Areas in TFS instead of Team Projects and for an explanation of branching see Guidance: A Branching strategy for Scrum Teams. Update 17th May 2010 – We are currently trialling running a single Sprint branch to improve our history. Whenever I setup a new Team Project I implement the basic version control structure. I put “readme.txt” files in the folder structure explaining the different levels, and a solution file called “[Client].[Product].sln” located at “$/[Client]/[Product]/DEV/Main” within version control. Developers should add any projects you need to create to that solution in the format “[Client].[Product].[ProductArea].[Assembly]” and they will automatically be picked up and built automatically when you setup Automated Builds using Team Foundation Build. All test projects need to be done using MSTest to get proper IDE and Team Foundation Build integration out-of-the-box and be named for the assembly that it is testing with a naming convention of “[Client].[Product].[ProductArea].[Assembly].Tests” Here is a description of the folder layout; this content should be replicated in readme files under version control in the relevant locations so that even developers new to the project can see how to do it. Figure: The Team Project level - at this level there should be a folder for each the products that you are building if you are using Areas correctly in TFS 2010. You should try very hard to avoided spaces as these things always end up in a URL eventually e.g. "Code Auditor" should be "CodeAuditor". Figure: Product Level - At this level there should be only 3 folders (DEV, RELESE and SAFE) all of which should be in capitals. These folders represent the three stages of your application production line. Each of them may contain multiple branches but this format leaves all of your branches at the same level. Figure: The DEV folder is where all of the Development branches reside. The DEV folder will contain the "Main" branch and all feature branches is they are being used. The DEV designation specifies that all code in every branch under this folder has not been released or made ready for release. And feature branches MUST merge (Forward Integrate) from Main and stabilise prior to merging (Reverse Integration) back down into Main and being decommissioned. Figure: In the Feature branching scenario only merges are allowed onto Main, no development can be done there. Once we have a mature product it is important that new features being developed in parallel are kept separate. This would most likely be used if we had more than one Scrum team working on a single product. Figure: when we are ready to do a release of our software we will create a release branch that is then stabilised prior to deployment. This protects the serviceability of of our released code allowing developers to fix bugs and re-release an existing version. Figure: All bugs found on a release are fixed on the release.  All bugs found in a release are fixed on the release and a new deployment is created. After the deployment is created the bug fixes are then merged (Reverse Integration) into the Main branch. We do this so that we separate out our development from our production ready code.  Figure: SAFE or RTM is a read only record of what you actually released. Labels are not immutable so are useless in this circumstance.  When we have completed stabilisation of the release branch and we are ready to deploy to production we create a read-only copy of the code for reference. In some cases this could be a regulatory concern, but in most cases it protects the company building the product from legal entanglements based on what you did or did not release. Figure: This allows us to reference any particular version of our application that was ever shipped.   In addition I am an advocate of having a single solution with all the Project folders directly under the “Trunk”/”Main” folder and using the full name for the project folders.. Figure: The ideal solution If you must have multiple solutions, because you need to use more than one version of Visual Studio, name the solutions “[Client].[Product][VSVersion].sln” and have it reside in the same folder as the other solution. This makes it easier for Automated build and improves the discoverability of your code and its dependencies. Send me your feedback!   Technorati Tags: VS ALM,VSTS Developing,VS 2010,VS 2008,TFS 2010,TFS 2008,TFBS

    Read the article

  • Some mail details about Orange Mauritius

    Being an internet service provider is not easy after all for a lot of companies. Luckily, there are quite some good international operators in this world. For example Orange Mauritius aka Mauritius Telecom aka Wanadoo(?) aka MyT here in Mauritius. The local circumstances give them a quasi-monopol position on fixed lines for telephony and therefore cable-based DSL internet connectivity. So far, not bad but as usual... the details. Just for the records, I am only using the services of Orange for mobile but friends and customers are bound, eh stuck, with other services of Orange Mauritius. And usually, being the IT guy, they get in touch with me to complain about problems or to ask questions on either their ADSL / MyT connection, mail services or whatever. Most of those issues are user-related and easily to solve by tweaking the configuration of their computer a little bit but sometimes it's getting weird. Using Orange ADSL... somewhere else Now, let's imagine we are an Orange ADSL customer for ages and we are using their mail services with our very own mail address like "[email protected]". We configured our mail client like Thunderbird, Outlook Express, Outlook or Windows Mail as publicly described, and we are able to receive and send emails like a champion. No problems at all, the world is green. Did I mention that we have a laptop? Ok, let's take our movable piece of information technology and visit a friend here on the island. Not surprising, he is also customer of Orange, so we can read and answer emails. But Orange is not the online internet service provider and one day, we happen to hang out with someone that uses Emtel via WiMAX or UMTS.. And the fun starts... We can still receive and read emails from our Orange mail account and the IT world is still bright but try to send mails to someone outside the domain "@intnet.mu" or "@orange.mu". Your mail client will deny sending mail with SMTP message 5.1.0 "blah not allowed". First guess, there is problem with the mail client, maybe magically the configuration changed over-night. But no it is still working at home... So, there is for sure a problem with the guy's internet connection. At least, it is his fault not to have Orange internet services, so it can not work properly... The Orange Mail FAQ After some more frustation we finally checkout the Orange Mail FAQ to see whether this (obviously?) common problem has been described already. Sorry, but those FAQ entries are even more confusing as it is not really clear how to handle this scenario. Best of all is that most of the entries are still refering to use servers of the domain "intnet.mu". I mean Orange will disable those systems in favour of the domain "orange.mu" in the near future and does not amend their FAQs. Come on, guys! Ok, settings for POP3 are there. Hm, what about the secure version POP3S? No signs at all... Even changing your mail client to use password encryption with STARTTLS is not allowed at all. Use "bow.intnet.mu" for incoming mail... Ahhh, pretty obvious host name. I mean, at least something like pop.intnet.mu or pop3.intnet.mu would have been more accurate. Funny of all, the hostname "pop.orange.mu" is accessible to receive your mail account. Alright, checking SMTP options for authentication or other like POP-before-SMTP or whatever well-known and established mechanism to send emails are described. I guess that spotting a whale or shark in Mauritian waters would be easier. Trial and error on SMTP settings reveal that neither STARTTLS or any other connection / password encryption is available. Using SSL/TLS on SMTP only reveals that there is no service answering your request. Calling customer service So, we have to bite into the bitter apple and get in touch with Orange customer service and complain/explain them our case and ask for advice. After some hiccups, we finally manage to get hold of someone competent in mail services and we receive the golden spoon of mail configuration made by Orange Mauritius: SMTP hostname: smtpauth.intnet.mu And the world of IT is surprisingly green again. Customer satisfaction? Dear Orange Mauritius, what's the problem with this information? Are you scared of mail spammer? Why isn't there any case in your FAQs? Ok, talking about your FAQs - simply said: they are badly outdated! Configure your mail client to use server name based in the domain intnet.mu but specify your account username with orange.mu as domain part. Although, that there are servers available on the domain orange.mu after all. So, why don't you provide current information like this: POP3 server name: pop.orange.muSMTP server name: smtp.orange.muSMTP authenticated: smtpauth.orange.mu It's not difficult, is it? In my humble opinion not really and you would provide clean, consistent and up-to-date information for your customers. This would produce less frustation and so less traffic on your customer service lines. Which after all, would improve the total user experience and satisfaction level on both sides. Without knowing these facts. Now, imagine you would take your laptop abroad and have to use other internet service providers to be able to be online... Calling your customer service would be unnecessary expensive!

    Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >