Search Results

Search found 6288 results on 252 pages for 'credit card'.

Page 212/252 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

  • HTG Explains: Why is Printer Ink So Expensive?

    - by Chris Hoffman
    Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr     

    Read the article

  • top Tweets SOA Partner Community – May 2012

    - by JuergenKress
    Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity SOA Community BPMN2.0 Oracle notations poster from eaiesb http://wp.me/p10C8u-pu Torsten WinterbergLook out for new Oracle #BPM edition coming up soon: The Oracle BPM Standard edtion! Great news for easy entry, small licence fees. Yes! Danilo Schmiedel Had a great chat with customer yesterday about #OracleBPM. Next step will be a 5day event combining modeling and implementation @soacommunity Frank Nimphius Still reading "Oracle Business Process Management Suite 11g Handbook". Excellent resource for a non-SOA but ADF guy like me ;-) Oracle New webcast: Maximize #Oracle #WebLogic Server ROI with Oracle #Enterprise #Manager 12c on May 2 at 10 am PT. Register http://bit.ly/JFUrR9 OTNArchBeat@OTNArchBeat BPM in Financial Services Industry | Sanjeev Sharma http://bit.ly/HCCxui JDeveloper & ADF BPEL 11.1.1.6 Certified for Prebuilt E-Business Suite 12.1.3 SOA Integrations http://dlvr.it/1V9SxR Oracle UPK & Tutor Collaborate Attendees: Visit the UPK demo pod, SIGS, and sessions: If you are attending Collaborate 2012 - Sun. http://bit.ly/J39z65 Heidi Buelow see #fmw track RT @demed: Are you going to #KSCOPE12 in San Antonio, June 24-28? http://kscope12.com/component/ seminar/seminarslist?topicsid=6 Use promo code Fusion for discount! Sabine Leitner #SIG #Middleware 15.05. Frankfurt #Oracle #DOAG Planung & Aufbau WebLogic Server #WLS http://bit.ly/HKsCWV @OracleWebLogic @soacommunity SOA Community MDS explorer by Red Samurai http://wp.me/p10C8u-pp Biemond &reg; Retrieve or set a HTTP header from Oracle BPEL: With Oracle SOA Suite 11g patch 12928372 you can finally retrie http://bit.ly/JejTHC Lucas Jellema Call for papers for UKOUG 2012 has opened: http://techandebs.ukoug.org /default.asp?p=9306 (deadline 1st of June) OTNArchBeat BPM API usage: List all BPM Processes for a user | Kavitha Srinivasan http://bit.ly/IJKVfj demed SOA, Cloud + Service Tech symposium (London, Sep 24-25) call for paper is open http://www.servicetechsymposium. com /call2012.php @techsymp #oraclesoa OracleBlogs Lessons learned configuring OER 11g Workflows http://ow.ly/1iMsKh OTNArchBeat Scripting WebLogic Admin Server Startup | Antony Reynolds http://bit.ly/IH5ciU orclateamsoa A-Team Blog #ateam: BPM API usage: List all BPM Processes for a user http://ow.ly/1iJADp Lucas Jellema Just blogged about our Live FMW Application Development show during OBUG 2012, next Tuesday 24th April in Maastricht: OracleBlogs OEG integration with OSB/OWSM - 11g http://ow.ly/1iKx7G SOA Community SOA Community Newsletter April 2012 http://wp.me/p10C8u-pl Frank DorstRT @whitehorsesnl: Whiteblog: BPM Process Spaces in Oracle Webcenter (Patch Set 5(http://bit.ly/Hxzh29) #soacommunity #bpm #oracle) David Shaffer The Advanced SOA suite training class next week in Redwood City is full! Learned a lot about accepting credit card payments. OTNArchBeat Running Built-In Test Simulator with SOA Suite Healthcare 11g in PS4 and PS5 | Shub Lahiri http://bit.ly/IgI8GN SOA Community Oracle Fusion Middleware Innovation Awards 2012, Call for Nominations #ofmaward #soa #bpm #soacommunity OTNArchBeat Updated SOA Documents now available in ITSO Reference Library http://bit.ly/I3Y6Sg Oracle Middleware Data Integrator & SOA - why 2 products better than one for integration? Webcast: Apr 24 10 AM PT http://bit.ly/IzmtKR Andrejus Baranovskis Red Samurai MDS Cleaner V2.0 http://fb.me/FxLVz82w SOA Community “@rluttikhuizen: Chapter 4 of SOA Made Simple book "Classification of Services" ready for collegial review” can #soacommunity get a preview? Xavier Verhaeghe #Gartner figures are out: #Oracle top in App Server market share (43.1%) and Relational #Database, too (48.8%) in 2011 Sabine Leitner WLS12c, Exa*, IDM, EM12c, DB @ Private, Public, Hybrid #Cloud Event 26.04. FFM #Oracle http://bit.ly/zcRuxi @OracleCloudZone @soacommunity Michel Schildmeijer@wlscommunity @MiddlewareMagic @OTNArchBeat @Oracle_Fusion Oracle WebLogic / SOA Suite 11g HACMP Cluster take-over http://lnkd.in/G78qMd Oracle Middleware Hear how ODI and SOA's unified approach are key to untangling your business. April 24 10AM PT http://bit.ly/IdcsUz #Oracle OTNArchBeat Using SAP Adapter with OSB 11g (PS3) | Shub Lahiri http://bit.ly/IswR9K SOA Community Integrating with Oracle Fusion Applications: Discovering Integration Artifacts https://blogs.oracle.com/governance /entry/integrating_with_oracle_fusion_ applications #soacommunity #oer #governance OracleBlogs Tuning B2B Server Engine Threads in SOA Suite 11g http://ow.ly/1iH5bx OracleBlogs Top Tweets SOA Partner Community April 2012 http://ow.ly/1iVHfA SOA Community Oracle SOA Suite 11g Database Growth Management http://wp.me/p10C8u-pi Sabine Leitner WLS12c,Exa*,IDM,EM12c, DB @ Private, Public, Hybrid #Cloud Event 24.04. München #Oracle http://bit.ly/zcRuxi @OracleCloudZone @soacommunity SOA Community Testing Business Rules by Mark Nelson http://redstack.wordpress.com/2012/ 04/18/testing-business-rules/ #soacommunity #soa #rules #oracle SOA CommunityTop Tweets SOA Partner Community - April 2012 http://wp.me/p10C8u-pn OTNArchBeat Webcast: Untangle Your Business with Oracle Unified SOA and Data Integration - April 24 http://bit.ly/IQexqT OTNArchBeat"Do more with SOA Integration: Best of Packt" contributors include @gschmutz, @llaszews, many others http://amzn.to/HVWwYt ServiceTechSymposium Symposium agenda page coming together - page launched today with keynotes, sessions to be added shortly. http://www.servicetechsymposium.com /agenda2012.php SOA Community Shipping Specialization plaques - congratulation #Fujitsu - request yours https://soacommunity.wordpress. com/2011/02/23/who-are-the-soa-experts-specialization-recognized-by-customers/ #soacommunity #OPN http://pic.twitter.com/YMRm2ion ServiceTechSymposium call for Presentations Submission Deadline Moved Up to May 21, 2012. Send your presentations submissions ASAP! ServiceTechSymposium Symposium Keynote by Vicente Navarro, European Space Agency, added to agenda: "SOA & Service-Orientation at the European Space Agency" SOA Community Running a large #soa project? Make sure you read - Oracle SOA Suite 11g Database Growth Management #soacommunity #opn SOA Community List all BPM Processes for a user by Yogesh l #bpm #oracle #soacommunity  For regular information on Oracle SOA Suite become a member in the SOA Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Technorati Tags: soacommunity, twitter,Oracle,SOA Community,Jürgen Kress,OPN,SOA,BPM

    Read the article

  • System crashes/lockups + compiz/cairo/gnome-panel crashing due to cached ram, please help?

    - by Kristian Thomson
    Can someone help me to troubleshoot system crashes and lockups which result in compiz/cairo dock and gnome-panel crashing? I also get no window borders after the crash and a lot of kernel memory errors. Logs are telling me that apps were killed due to not enough memory, but the system is caching like 14GB of my ram so I'm a bit stuck on what/how to stop it. I'm running Ubuntu 12.10 on a 2011 Mac Mini with 16 GB ram. Here's some of the logs that look like they could be causing trouble. I woke up this morning to find chrome/skype/cairo dock and a few others had been killed and here is what the log said. Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.959890] Out of memory: Kill process 12247 (chromium-browse) score 101 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.959893] Killed process 12247 (chromium-browse) total-vm:238948kB, anon-rss:17064kB, file-rss:20008kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.972283] Out of memory: Kill process 10976 (dropbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.972288] Killed process 10976 (dropbox) total-vm:316392kB, anon-rss:115484kB, file-rss:16504kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.975890] Out of memory: Kill process 10887 (rhythmbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.975895] Killed process 11515 (tray_icon_worke) total-vm:63336kB, anon-rss:15960kB, file-rss:11436kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.281535] Out of memory: Kill process 10887 (rhythmbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.281539] Killed process 10887 (rhythmbox) total-vm:528980kB, anon-rss:92272kB, file-rss:36520kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.283110] Out of memory: Kill process 10889 (skype) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.283113] Killed process 10889 (skype) total-vm:415056kB, anon-rss:84880kB, file-rss:22160kB I went to look deeper into things and saw that the whole time I'm having these kernel errors with out of memory and something mentioning radeon. I have a Radeon HD 6600M graphics card using the open source driver, not the proprietary one. I was wondering if perhaps using the proprietary one would solve the problem. Also, while writing this in Chrome rhythmbox and chrome just got killed while typing this, due to out of memory errors or so it reports, though I have 7 GB of free RAM at the time with 7 GB cached as well. Here is a full copy of my logs that happened in kern.log simply from when I began typing this question. http://pastebin.com/cdxxDktG Thanks in advance, Kris

    Read the article

  • HTG Explains: Are You Using IPv6 Yet? Should You Even Care?

    - by Chris Hoffman
    IPv6 is extremely important for the long-term health of the Internet. But is your Internet service provider providing IPv6 connectivity yet? Does your home network support it? Should you even care if you’re using IPv6 yet? Switching from IPv4 to IPv6 will give the Internet a much larger pool of IP addresses. It should also allow every device to have its own public IP address, rather than be hidden behind a NAT router. IPv6 is Important Long-Term IPv6 is very important for the long-term health of the Internet. There are only about 3.7 billion public IPv4 addresses. This may sound like a lot, but it isn’t even one IP address for each person on the planet. Considering people have more and more Internet-connected devices — everything from light bulbs to thermostats are starting to become network-connected — the lack of IP addresses is already proving to be a serious problem. This may not affect those of us in well-off developed countries just yet, but developing countries are already running out of IPv4 addresses. So, if you work at an Internet service provider, manage Internet-connected servers, or develop software or hardware — yes, you should care about IPv6! You should be deploying it and ensuring your software and hardware works properly with it. It’s important to prepare for the future before the current IPv4 situation becomes completely unworkable. But, if you’re just typical user or even a typical geek with a home Internet connection and a home network, should you really care about your home network just yet? Probably not. What You Need to Use IPv6 To use IPv6, you’ll need three things: An IPv6-Compatible Operating System: Your operating system’s software must be capable of using IPv6. All modern desktop operating systems should be compatible — Windows Vista and newer versions of Windows, as well as modern versions of Mac OS X and Linux. Windows XP doesn’t have IPv6 support installed by default, but you shouldn’t be using Windows XP anymore, anyway. A Router With IPv6 Support: Many — maybe even most — consumer routers in the wild don’t support IPv6. Check your router’s specifications details to see if it supports IPv6 if you’re curious. If you’re going to buy a new router, you’ll probably want to get one with IPv6 support to future-proof yourself. If you don’t have an IPv6-enabled router yet, you don’t need to buy a new one just to get it. An ISP With IPv6 Enabled:  Your Internet service provider must also have IPv6 set up on their end. Even if you have modern software and hardware on your end, your ISP has to provide an IPv6 connection for you to use it. IPv6 is rolling out steadily, but slowly — there’s a good chance your ISP hasn’t enabled it for you yet. How to Tell If You’re Using IPv6 The easiest way to tell if you have IPv6 connectivity is to visit a website like testmyipv6.com. This website allows you to connect to it in different ways — click the links near the top to see if you can connect to the website via different types of connections. If you can’t connect via IPv6, it’s either because your operating system is too old (unlikely), your router doesn’t support IPv6 (very possible), or because your ISP hasn’t enabled it for you yet (very likely). Now What? If you can connect to the test website above via IPv6, congratulations! Everything is working as it should. Your ISP is doing a good job of rolling out IPv6 rather than dragging its feet. There’s a good chance you won’t have IPv6 working properly, however. So what should you do about this — should you head to Amazon and buy a new IPv6-enabled router or switch to an ISP that offers IPv6? Should you use a “tunnel broker,” as the test site recommends, to tunnel into IPv6 via your IPv4 connection? Well, probably not. Typical users shouldn’t have to worry about this yet. Connecting to the Internet via IPv6 shouldn’t be perceptibly faster, for example. It’s important for operating system vendors, hardware companies, and Internet service providers to prepare for the future and get IPv6 working, but you don’t need to worry about this on your home network. IPv6 is all about future-proofing. You shouldn’t be racing to implement this at home yet or worrying about it too much — but, when you need to buy a new router, try to buy one that supports IPv6. Image Credit: Adobe of Chaos on Flickr, hisperati on Flickr, Vox Efx on Flickr     

    Read the article

  • How to setup Dual Head with "radeon" driver for R770?

    - by user1709408
    I want to make dual head setup without xrandr but with Xinerama. I put "Screen 1" line into xorg.conf, but card still show identical output on DVI-2 and DVI-3 It is important to use xinerama for me (to glue three monitors), that's why i decide not to use ranrd (randr is incompatible with xinerama as i read somewhere) Here is my videocard (HD 4850 X2): lspci | grep R700 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] 04:00.0 Display controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] Here is how monitors are connected: grep "DVI" /var/log/Xorg.0.log [ 1210.002] (II) RADEON(0): Output DVI-0 using monitor section Monitor0 [ 1210.048] (II) RADEON(0): Output DVI-1 has no monitor section [ 1210.079] (II) RADEON(0): EDID for output DVI-0 [ 1210.080] (II) RADEON(0): Printing probed modes for output DVI-0 [ 1210.128] (II) RADEON(0): EDID for output DVI-1 [ 1210.128] (II) RADEON(0): Output DVI-0 connected [ 1210.128] (II) RADEON(0): Output DVI-1 disconnected [ 1210.128] (II) RADEON(0): Output DVI-0 using initial mode 1920x1200 [ 1210.160] (II) RADEON(1): Output DVI-2 using monitor section Monitor2 [ 1210.215] (II) RADEON(1): Output DVI-3 has no monitor section [ 1210.246] (II) RADEON(1): EDID for output DVI-2 [ 1210.247] (II) RADEON(1): Printing probed modes for output DVI-2 [ 1210.299] (II) RADEON(1): EDID for output DVI-3 [ 1210.300] (II) RADEON(1): Printing probed modes for output DVI-3 [ 1210.300] (II) RADEON(1): Output DVI-2 connected [ 1210.300] (II) RADEON(1): Output DVI-3 connected [ 1210.300] (II) RADEON(1): Output DVI-2 using initial mode 1920x1200 [ 1210.300] (II) RADEON(1): Output DVI-3 using initial mode 1920x1200 Here is my /etc/X11/xorg.conf Section "ServerFlags" Option "RandR" "0" Option "Xinerama" "1" EndSection Section "ServerLayout" Identifier "Three Head Layout" Screen "MyPrecious0" Screen "MyPrecious2" RightOf "MyPrecious0" Screen "MyPrecious3" LeftOf "MyPrecious0" EndSection Section "Screen" Identifier "MyPrecious0" Monitor "Monitor0" Device "Device300" EndSection Section "Screen" Identifier "MyPrecious2" Monitor "Monitor2" Device "Device400" EndSection Section "Screen" Identifier "MyPrecious3" Monitor "Monitor3" Device "Device401" EndSection Section "Device" Identifier "Device300" BusID "PCI:3:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device400" BusID "PCI:4:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device401" BusID "PCI:4:0:0" Screen 1 Driver "radeon" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Monitor" Identifier "Monitor2" EndSection Section "Monitor" Identifier "Monitor3" EndSection I tried to switch to vesa driver (didn't work for me) I tried to add options like Option "ZaphodHeads" "DVI-2" and Option "ZaphodHeads" "DVI-3" into sections "Device 400" and "Device 401" (this didn't help because "ZaphodHeads" option is for ranrd, and randr is disabled by decision) I tried to merge sections "Device 400" and "Device 401" into one section and add Option "ZaphodHeads" "DVI-2,DVI-3" (see comment about randr above) single section setup helps to change log line RADEON(1): Output DVI-3 has no monitor section into RADEON(1): Output DVI-3 using monitor section Monitor3 but nothing was enough to switch from screen cloning to separate screens. This problem (lack of documentation on radeon driver) is similar to these: Radeon display driver clones monitors while using Xinerama (moderators decision to close that problem was wrong) Ubuntu 12.10 multi-monitor setup isn't working The problem is solvable, because this hardware worked as three headed for me earlier with gentoo/xorg-server-1.3 Xorg -configure creates setup for the first monitor on the first GPU Please don't advise to use fglrx/aticonfig/amdcccle (this goes against my religion beliefs)

    Read the article

  • Do You Develop Your PL/SQL Directly in the Database?

    - by thatjeffsmith
    I know this sounds like a REALLY weird question for many of you. Let me make one thing clear right away though, I am NOT talking about creating and replacing PLSQL objects directly into a production environment. Do we really need to talk about developers in production again? No, what I am talking about is a developer doing their work from start to finish in a development database. These are generally available to a development team for building the next and greatest version of your databases and database applications. And of course you are using a third party source control system, right? Last week I was in Tampa, FL presenting at the monthly Suncoast Oracle User’s Group meeting. Had a wonderful time, great questions and back-and-forth. My favorite heckler was there, @oraclenered, AKA Chet Justice.  I was in the middle of talking about how it’s better to do your PLSQL work in the Procedure Editor when Chet pipes up - Don’t do it that way, that’s wrong Just press play to edit the PLSQL directly in the database Or something along those lines. I didn’t get what the heck he was talking about. I had been showing how the Procedure Editor gives you much better feedback and support when working with PLSQL. After a few back-and-forths I got to what Chet’s main objection was, and again I’m going to paraphrase: You should develop offline in your SQL worksheet. Don’t do anything in the database until it’s done. I didn’t understand. Were developers expected to be able to internalize and mentally model the PL/SQL engine, see where their errors were, etc in these offline scripts? No, please give Chet more credit than that. What is the ideal Oracle Development Environment? If I were back in the ‘real world’ of database development, I would do all of my development outside of the ‘dev’ instance. My development process looks a little something like this: Do I have a program that already does something like this – copy and paste Has some smart person already written something like this – copy and paste Start typing in the white-screen-of-panic and bungle along until I get something that half-works Tweek, debug, test until I have fooled my subconscious into thinking that it’s ‘good’ As you might understand, I don’t want my co-workers to see the evolution of my code. It would seriously freak them out and I probably wouldn’t have a job anymore (don’t remind me that I already worked myself out of development.) So here’s what I like to do: Run a Local Instance of Oracle on my Machine and Develop My Code Privately I take a copy of development – that’s what source control is for afterall – and run it where no one else can see it. I now get to be my own DBA. If I need a trace – no problem. If I want to run an ASH report, no worries. If I need to create a directory or run some DataPump jobs, that’s all on me. Now when I get my code ‘up to snuff,’ then I will check it into source control and compile it into the official development instance. So my teammates suddenly go from seeing no program, to a mostly complete program. Is this right? If not, it doesn’t seem wrong to me. And after talking to Chet in the car on the way to the local cigar bar, it seems that he’s of the same opinion. So what’s so wrong with coding directly into a development instance? I think ‘wrong’ is a bit strong here. But there are a few pitfalls that you might want to look out for. A few come to mind – and I’m sure Chet could add many more as my memory fails me at the moment. But here goes: Development instance isn’t properly backed up – would hate to lose that work Development is wiped once a week and copied over from Prod – don’t laugh Someone clobbers your code You accidentally on purpose clobber someone else’s code The more developers you have in a single fish pond, the greater chance something ‘bad’ will happen This Isn’t One of Those Posts Where I Tell You What You Should Be Doing I realize many shops won’t be open to allowing developers to stage their own local copies of Oracle. But I would at least be aware that many of your developers are probably doing this anyway – with or without your tacit approval. SQL Developer can do local file tracking, but you should be using Source Control too! I will say that I think it’s imperative that you control your source code outside the database, even if your development team is comprised of a single developer. Store your source code in a file, and control that file in something like Subversion. You would be shocked at the number of teams that do not use a source control system. I know I continue to be shocked no matter how many times I meet another team running by the seat-of-their-pants. I’d love to hear how your development process works. And of course I want to know how SQL Developer and the rest of our tools can better support your processes. And one last thing, if you want a fun and interactive presentation experience, be sure to have Chet in the room

    Read the article

  • How do I keep my Huawei E3131 3G modem from unmounting?

    - by John Perez
    I need help getting my Huawei E3131 modem to (consistently) work. I am currently running Ubuntu 12.04.2 and 3G dongles have worked many times before. However, my newly acquired Huawei E3131 is causing problems. When plugged in, Ubuntu detects the device as a CD-ROM and a modem. I can browse the dongle's contents using Nautilus and Network Manager is able to configure and work the dongle out-of-the-box. I can even get to surf. However, within minutes, the connection drops and the CD-ROM is unmounted. I wait about 15 seconds, then the CD-ROM mounts again and Network Manager is able to connect again with short-lived surfing. Rinse, lather and repeat. It's strange that the device mounts as a CD-ROM, but works as a modem, too, suggesting that mode switching happens somewhere. It's not a signal coverage problem, either because I tested the same SIM card using 3 other different dongles (2 ZTEs and another Huawei) and it is only this E3131 that has this problem. If pertinent, the other dongles weren't being detected as CD-ROMs. Output of lsusb Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0ac8:c342 Z-Star Microelectronics Corp. Bus 001 Device 010: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard Bus 001 Device 004: ID 0a5c:219b Broadcom Corp. Bluetooth 2.1 Device I tried installing the drivers found here, but no fish. Furthermore, my device is an E3131, but lsusb for some reason detects it as an E398. I'm not sure how that plays a role for this problem, though. I hope someone out there can help me. I'm out of ideas already. Thank you very much!

    Read the article

  • Wireless Drivers for Broadcom BCM 4321 (14e4:4329) will not stay connected to a wireless network

    - by Eugene
    So, I'm not necessary new to Linux, I just never took the time to learn it, so please, bare with me. I just swapped out one of my wireless cards from one computer to another. This wireless card in question would be a "Broadcom BCM4321 (14e4:4329)" or actually a "Netgear WN311B Rangemax Next 270 Mbps Wireless PCI Adapter", but that's not important. I've tried (but probably screwed up in the process) installing the "wl" , "b43" and "brcmsmac" drivers, or at least I think I did. Currently I have only the following drivers loaded: eugene@EugeneS-PCu:~$ lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" b43 387371 0 bcma 52096 1 b43 mac80211 630653 1 b43 cfg80211 484040 2 b43,mac80211 ssb_hcd 12869 0 ssb 62379 2 b43,ssb_hcd The main issue is that with most of the drivers available that I've installed, they will find my wireless network but, they will only stay connected for about a minute with abnormally slow speed and then all of a sudden disconnect. Currently, the computer is hooked into another to share it's connect so that I can install drivers from the internet instead of loading them on to a flash drive and doing it offline. If anyone has any insight to the problem, that would be awesome. If not, I'll probably just look up how to install the Windows closed source driver. Edit 1: Even when I try the method here, as suggested when this was marked as a duplicate, I still can't stay connected to a wireless network. Edit 2: After discussing my issue with @Luis, he opened my question back up and told me to include the tests/procedures in the comments. Basically I did this: Read the first answer of the link above when this question was marked as duplicate which involved installing removing bcmwl-kernel-source and instead install firmware-b43-installer and b43-fwcutter. No change of result and contacted Luis in the comments, who then told me to try the second answer which involved removing my previous mistake and installing bcmwl-kernel-source Now the Network Manger (this has happend before, but usally I fixed it by using a different driver) even recognizes WiFi exist (both non-literal and literal). Luis who then suggested sudo rfkill unblock all rfkill unblock all didn't return anything, so I decide to try sudo rfkill list all. Returns nothing (no wonder rfkill unblock all did nothing). I enter lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" and that returns nothing. Try loading the driver by entering sudo modprobe b43 and try lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" again. Returns this: eugene@Eugenes-uPC:~$ sudo modprobe b43 eugene@Eugenes-uPC:~$ lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" b43 387371 0 bcma 52096 1 b43 mac80211 630653 1 b43 cfg80211 484040 2 b43,mac80211 ssb_hcd 12869 0 ssb 62379 2 b43,ssb_hcd So to recap: Currently Network Manager doesn't recognize Wireless exists, b43 drivers are loaded and I've currently hardwired a connect from my laptop to the computer that's causing this.

    Read the article

  • Unable to update/ install any files [closed]

    - by Surya
    Possible Duplicate: “Problem with MergeList” error when trying to do an update Just now I installed ubuntu 12.04 on my Lenovo G570 laptop. First I got an error at the time of installation (don't know about it) and I restarted the system and next time, it went well. So, after installing problems started.. There was a error with "Language recognition" and I tried to fix it but didn't work. I tried to install powerTop to check the status of power management. at terminal: sudo apt-get install powertop This is the error I got surya@surya-Lenovo-G570:~$ sudo apt-get powertop install [sudo] password for surya: E: Invalid operation powertop surya@surya-Lenovo-G570:~$ sudo apt-get install powertop Reading package lists... Error! E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages E: The package lists or status file could not be parsed or opened. surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ I downloaded Google Chrome .deb one and tried to install but its not working. Software center is opened and its not loading. There was a notification on the status bar which says: An error occurred please run the package manager from the right-click menu ... .... ... E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages "Copy & Paste" from terminal is not really working... When I press Ctrl + C; its showing ^C on terminal but its not working.. The most important error: I am unable to see a "chip" icon on the status bar so as to install proprietary drivers for my ATI drivers... The interesting part is, powertop worked will on live cd and it even detected my ATI card. Update When I opened "Software Up to Date", this showed a error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.' : My laptop details Lenovo G570; Intel 2nd Gen i5 processor 4GB DDR3 RAM Intel in-build graphics + AMD Radeon HD 6370M 1GB graphics. I need help ASAP.

    Read the article

  • VLC will sometimes have issues displaying video in fullscreen. What could cause this? How would I troubleshoot the issue?

    - by George Marian
    Recently VLC has been having issues displaying video in fullscreen mode. AFAIK, nothing has changed with the video card drivers and it's certainly the same version of VLC. (/me shakes a fist at the repository maintainers) This has worked without issue in the past. In fact, I've had as many as 6 instances of VLC running, each playing a video. One was always fullscreen on my second monitor, while the others were tiled on my primary monitor. I was able to toggle any of the other 5 into fullscreen mode and the video displayed without issue. Lately, I've been having trouble running 2 instances in fullscreen mode. (Sometimes, even a single instance will not display the video in fullscreen.) VLC will continue to play the video, but in fullscreen mode I see nothing but a black screen. Sometimes, the video will display if I maximize the VLC window. Other times, I have to settle for a smaller sized window. I don't know if this is pertinent, but sometimes changing the min/max state of a Firefox window (Minefield, specifically) seemed to allow the troublesome instance to display the video in fullscreen mode. However, that did not prove to be a consistent workaround. Sometimes, it seemed that closing a Firefox window did the trick, though that isn't consistently successful either. (I futzed with Firefox, because with the crazy number of windows and tabs that I normally have open, it regularly hogs about 1 GB of RAM.) Another bit of funkiness that comes to mind is the fact that my secondary monitor is considered the primary on boot-up. I use xrandr to designate the real 1st monitor as primary after boot-up, as suggested by someone in a question I asked on the Unix & Linux SE site. Specs: Ubuntu 10.10 w/ Gnome and Compiz 8GB RAM AMD Phenom II 965 Black Edition Asus M4A79 Deluxe mobo XFX ATI Radeon HD 5750 w/ 1GB RAM VLC is configured to use the hardware overlay for video (as per the default setting) Does anyone have an idea what may cause this issue or how I may go about troubleshooting it? Update: Right now I have 2 instances of VLC playing, each in fullscreen mode on a separate monitor. This is what I see:

    Read the article

  • 3 Ways to Make Steam Even Faster

    - by Chris Hoffman
    Have you ever noticed how slow Steam’s built-in web browser can be? Do you struggle with slow download speeds? Or is Steam just slow in general? These tips will help you speed it up. Steam isn’t a game itself, so there are no 3D settings to change to achieve maximum performance. But there are some things you can do to speed it up dramatically. Speed Up the Steam Web Browser Steam’s built-in web browser — used in both the Steam store and in Steam’s in-game overlay to provide a web browser you can quickly use within games – can be frustratingly slow on many systems. Rather than the typical speed we’ve come to expect from Chrome, Firefox, or even Internet Explorer, Steam seems to struggle. When you click a link or go to a new page, there’s a noticeable delay before the new page appears — something that doesn’t happen in desktop browsers. Many people seem to have made peace with this slowness, accepting that Steam’s built-in browser is just bad. However, there’s a trick that will eliminate this delay on many systems and make the Steam web browser fast. This problem seems to arise from an incompatibility with the Automatically Detect Proxy Settings option, which is enabled by default on Windows. This is a compatibility option that very few people should actually need, so it’s safe to disable it. To disable this option, open the Internet Options dialog — press the Windows key to access the Start menu or Start screen, type Internet Options, and click the Internet Options shortcut. Select the Connections tab in the Internet Options window and click the LAN settings button. Uncheck the Automatically detect settings option here, then click OK to save your settings. If you experienced a significant delay every time a web page loaded in Steam’s web browser, it should now be gone. In the unlikely event that you encounter some sort of problem with your network connection, you could always re-enable this option. Increase Steam’s Game Download Speed Steam attempts to automatically select the nearest download server to your location. However, it may not always select the ideal download server. Or, in the case of high-traffic events like big seasonal sales and huge game launches, you may benefit from selecting a less-congested server. To do this, open Steam’s settings by clicking the Steam menu in Steam and selecting Settings. Click over to the Downloads tab and select the closest download server from the Download Region box. You should also ensure that Steam’s download bandwidth isn’t limited from here. You may want to restart Steam and see if your download speeds improve after changing this setting. In some cases, the closest server might not be the fastest. One a bit farther away could be faster if your local server is more congested, for example. Steam once provided information about content server load, which allowed you to select a regional server that wasn’t under high-load, but this information no longer seems to be available. Steam still provides a page that shows you the amount of download activity happening in different regions, including statistics about the difference in download speeds in different US states, but this information isn’t as useful. Accelerate Steam and Your Games One way to speed up all your games — and Steam itself —  is by getting a solid-state drive and installing Steam to it. Steam allows you to easily move your Steam folder — at C:\Program Files (x86)\Steam by default — to another hard drive. Just move it like you would any other folder. You can then launch the Steam.exe program as if you had never moved Steam’s files. Steam also allows you to configure multiple game library folders. This means that you can set up a Steam library folder on a solid-state drive and one on your larger magnetic hard drive. Install your most frequently played games to the solid-state drive for maximum speed and your less frequently played ones to the slower magnetic hard drive to save SSD space. To set up additional library folders, open Steam’s Settings window and click the Downloads tab. You’ll find the Steam Library Folders option here. Click the Add Library Folder button and create a new game library on another hard drive. When you install a game in Steam, you’ll be asked which library folder you want to install it to. With the proxy compatibility option disabled, the correct download server chosen, and Steam installed to a fast SSD, it should be a speed demon. There’s not much more you can do to speed up Steam, short of upgrading other hardware like your computer’s CPU. Image Credit: Andrew Nash on Flickr     

    Read the article

  • Fun with Sun Ray, 3D, Oracle VM x86 and SRIOV

    - by wim.coekaerts
    One of the things I like about my job is that I get to play around with stuff and make use of the technologies we work on in my teams. Sort of my own little playground. It allows me to study the products in great detail and put them to use in ways that individual product teams don't always intend them to be used for :) but that makes it fun. I have a lot of this set up at home because... work is sort of hobby and I just like to tinker with it. Anyway, a few weeks ago I was looking at my sun ray rig at home and how well 3D works. Google Earth and some basic opengl tests like glxspheres combined with virtualgl. It resulted in some very cool demos recorded with my little camera (sorry for the crappy quality of the video :-) : OVDC (soft client) on my mac Sun Ray 2FS Never mind the hickups during zoom, that's because I was using the scrollwheel on my mouse and I can't scroll uninterrupted :) Anyway, this is quite cool ! The setup for this was the following : Sun Ray on LAN, Sun Ray Server 5 latest installed on OL5.5 inside a VM running on Oracle VM 2.2 (hardware virt, with a virtual network (vif)) and the virtualgl rendering happened on another box (wopr5) that runs linux on a little atom D520 with an ION2 gpu. So network goes from Sun Ray to Sun Ray Server to wopr5 and back. Given that this is full screen 3D it puts a good amount of load on the network and it's pretty cool that SRS was just a VM :) So, separately, I had written a little blog entry about using sriov and oracle vm a while back. link to sriov blog entry Last night when I came home I wanted to do some more playing around with SRIOV and live migrate. To do this, I wanted to set up a VM with 2 network interfaces, one virtual network (vif) and then one that's one of the SRIOV virtual functions from my network card. Inside the guest they show as eth0 and eth1, and then bond them using a standard linux bonding device (bond0 here) with active active links. The goal here is that on live migrate, we would detach the VF (eth1 in guest in this case), the bond would then just hum along on eth0 (vif) we can live migrate the VM and then on the other server after the migrate completes we re-attach a VF to the VM there and eth1 pops up again and the bond uses both eth0/eth1 to do its work. So, to set this up, I figured, why not use my sun ray server VM because the 3D work generates a nice network load and is very latency/timing sensitive. In the end, I ran glxspheres on my sunray server (vm) displaying on my sun ray 2 fs and while that was running, I did my live migrate test of this vm (unplug pci VF, migrate, reconnect vf) and guess what, it just kept running :) veryyyyyy cool. now, it was supposed to, but it's always nice to see it actually work, for real. Here's a diagram of it. No gimics - just real technology at work ! enjoy :)

    Read the article

  • How to Force Graphics Options in PC Games with NVIDIA, AMD, or Intel Graphics

    - by Chris Hoffman
    PC games usually have built-in graphics options you can change. But you’re not limited to the options built into games — the graphics control panels bundled with graphics drivers allow you to tweak options from outside PC games. For example, these tools allow you to force-enabling antialiasing to make old games look better, even if they don’t normally support it. You can also reduce graphics quality to get more performance on slow hardware. If You Don’t See These Options If you don’t have the NVIDIA Control Panel, AMD Catalyst Control Center, or Intel Graphics and Media Control Panel installed, you may need to install the appropriate graphics driver package for your hardware from the hardware manufacturer’s website. The drivers provided via Windows Update don’t include additional software like the NVIDIA Control Panel or AMD Catalyst Control Center. Drivers provided via Windows Update are also more out of date. If you’re playing PC games, you’ll want to have the latest graphics drivers installed on your system. NVIDIA Control Panel The NVIDIA Control Panel allows you to change these options if your computer has NVIDIA graphics hardware. To launch it, right-click your desktop background and select NVIDIA Control Panel. You can also find this tool by performing a Start menu (or Start screen) search for NVIDIA Control Panel or by right-clicking the NVIDIA icon in your system tray and selecting Open NVIDIA Control Panel. To quickly set a system-wide preference, you could use the Adjust image settings with preview option. For example, if you have old hardware that struggles to play the games you want to play, you may want to select “Use my preference emphasizing” and move the slider all the way to “Performance.” This trades graphics quality for an increased frame rate. By default, the “Use the advanced 3D image settings” option is selected. You can select Manage 3D settings and change advanced settings for all programs on your computer or just for specific games. NVIDIA keeps a database of the optimal settings for various games, but you’re free to tweak individual settings here. Just mouse-over an option for an explanation of what it does. If you have a laptop with NVIDIA Optimus technology — that is, both NVIDIA and Intel graphics — this is the same place you can choose which applications will use the NVIDIA hardware and which will use the Intel hardware. AMD Catalyst Control Center AMD’s Catalyst Control Center allows you to change these options on AMD graphics hardware. To open it, right-click your desktop background and select Catalyst Control Center. You can also right-click the Catalyst icon in your system tray and select Catalyst Control Center or perform a Start menu (or Start screen) search for Catalyst Control Center. Click the Gaming category at the left side of the Catalyst Control Center window and select 3D Application Settings to access the graphics settings you can change. The System Settings tab allows you to configure these options globally, for all games. Mouse over any option to see an explanation of what it does. You can also set per-application 3D settings and tweak your settings on a per-game basis. Click the Add option and browse to a game’s .exe file to change its options. Intel Graphics and Media Control Panel Intel integrated graphics is nowhere near as powerful as dedicated graphics hardware from NVIDIA and AMD, but it’s improving and comes included with most computers. Intel doesn’t provide anywhere near as many options in its graphics control panel, but you can still tweak some common settings. To open the Intel graphics control panel, locate the Intel graphics icon in your system tray, right-click it, and select Graphics Properties. You can also right-click the desktop and select Graphics Properties. Select either Basic Mode or Advanced Mode. When the Intel Graphics and Media Control Panel appears, select the 3D option. You’ll be able to set your Performance or Quality setting by moving the slider around or click the Custom Settings check box and customize your Anisotropic Filtering and Vertical Sync preference. Different Intel graphics hardware may have different options here. We also wouldn’t be surprised to see more advanced options appear in the future if Intel is serious about competing in the PC graphics market, as they say they are. These options are primarily useful to PC gamers, so don’t worry about them — or bother downloading updated graphics drivers — if you’re not a PC gamer and don’t use any intensive 3D applications on your computer. Image Credit: Dave Dugdale on Flickr     

    Read the article

  • How to Use Steam In-Home Streaming

    - by Chris Hoffman
    Steam’s In-Home Streaming is now available to everyone, allowing you to stream PC games from one PC to another PC on the same local network. Use your gaming PC to power your laptops and home theater system. This feature doesn’t allow you to stream games over the Internet, only the same local network. Even if you tricked Steam, you probably wouldn’t get good streaming performance over the Internet. Why Stream? When you use Steam In-Home streaming, one PC sends its video and audio to another PC. The other PC views the video and audio like it’s watching a movie, sending back mouse, keyboard, and controller input to the other PC. This allows you to have a fast gaming PC power your gaming experience on slower PCs. For example, you could play graphically demanding games on a laptop in another room of your house, even if that laptop has slower integrated graphics. You could connect a slower PC to your television and use your gaming PC without hauling it into a different room in your house. Streaming also enables cross-platform compatibility. You could have a Windows gaming PC and stream games to a Mac or Linux system. This will be Valve’s official solution for compatibility with old Windows-only games on the Linux (Steam OS) Steam Machines arriving later this year. NVIDIA offers their own game streaming solution, but it requires certain NVIDIA graphics hardware and can only stream to an NVIDIA Shield device. How to Get Started In-Home Streaming is simple to use and doesn’t require any complex configuration — or any configuration, really. First, log into the Steam program on a Windows PC. This should ideally be a powerful gaming PC with a powerful CPU and fast graphics hardware. Install the games you want to stream if you haven’t already — you’ll be streaming from your PC, not from Valve’s servers. (Valve will eventually allow you to stream games from Mac OS X, Linux, and Steam OS systems, but that feature isn’t yet available. You can still stream games to these other operating systems.) Next, log into Steam on another computer on the same network with the same Steam username. Both computers have to be on the same subnet of the same local network. You’ll see the games installed on your other PC in the Steam client’s library. Click the Stream button to start streaming a game from your other PC. The game will launch on your host PC, and it will send its audio and video to the PC in front of you. Your input on the client will be sent back to the server. Be sure to update Steam on both computers if you don’t see this feature. Use the Steam > Check for Updates option within Steam and install the latest update. Updating to the latest graphics drivers for your computer’s hardware is always a good idea, too. Improving Performance Here’s what Valve recommends for good streaming performance: Host PC: A quad-core CPU for the computer running the game, minimum. The computer needs enough processor power to run the game, compress the video and audio, and send it over the network with low latency. Streaming Client: A GPU that supports hardware-accelerated H.264 decoding on the client PC. This hardware is included on all recent laptops and PCs. Ifyou have an older PC or netbook, it may not be able to decode the video stream quickly enough. Network Hardware: A wired network connection is ideal. You may have success with wireless N or AC networks with good signals, but this isn’t guaranteed. Game Settings: While streaming a game, visit the game’s setting screen and lower the resolution or turn off VSync to speed things up. In-Home Steaming Settings: On the host PC, click Steam > Settings and select In-Home Streaming to view the In-Home Streaming settings. You can modify your streaming settings to improve performance and reduce latency. Feel free to experiment with the options here and see how they affect performance — they should be self-explanatory. Check Valve’s In-Home Streaming documentation for troubleshooting information. You can also try streaming non-Steam games. Click Games > Add a Non-Steam Game to My Library on your host PC and add a PC game you have installed elsewhere on your system. You can then try streaming it from your client PC. Valve says this “may work but is not officially supported.” Image Credit: Robert Couse-Baker on Flickr, Milestoned on Flickr

    Read the article

  • Atheros AR9285 / Lenovo G560 wireless not working after installing 13.04

    - by teyi
    I had Ubuntu 12.04 initially installed on my laptop. I upgraded to 12.10 then 13.04. Everything worked fine, including wireless. After adding a new memory card ( I only had 2 gb and one memory slot free) my wireess stopped working. I backed up all my data and reinstallled Ubuntu 13.04. Everything works fine except wireess. I bought this laptop in 2010 from Japan. It has Intel Core i5 CPU M 450 @2.40 Ghz * 4 3,7 Gb RAM os type 64 bit The output of iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off The output of rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no The output of lshw -C network: *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:7d:fe:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.8.0-19-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d6400000-d640ffff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 02 serial: 88:ae:1d:2b:36:ac size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.2 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d2410000-d2410fff memory:d2400000-d240ffff memory:d2420000-d243ffff The wi-fi network appears as disconnected ( it's greyed out) Strangely enough I see a wifi network ( not mine) but not mine or the rest. That network doesn't require a password . I click on it, try to connect and i get an error message: failed to connect to xxxxx ... 32) The access point/org/freedesktop/NetworkManager/AccessPoint/0 was not in the scan list. Someone help please

    Read the article

  • Welcome to Jackstown

    - by fatherjack
    I live in a small town, the population count isn't that great but let me introduce you to some of the population. We'll start with Martin the Doc, he fixes up anything that gets poorly, so much so that he could be classed as the doctor, the vet and even the garage mechanic. He's got a reputation that he can fix anything and that hasn't been proved wrong yet. He's great friends with Brian (who gets called "Brains") the teacher who seems to have a sound understanding of any topic you care to pass his way. If he isn't sure he tells you and then goes to find out and comes back with a full answer real quick. Its good to have that sort of research capability close at hand. Brains is also great at encouraging anyone who needs a bit of support to get them up to speed and working on their jobs. Steve sees Brains regularly, that's because he is the librarian, he keeps all sorts of reading material and nowadays there's even video to watch about any topic you like. Steve keeps scouring all sorts of places to get the content that's needed and he keeps it in good order so that what ever is needed can be found quickly. He also has to make sure that old stuff gets marked as probably out of date so that anyone reading it wont get mislead. Over the road from him is Greg, he's the town crier. We don't have a newspaper here so Greg keeps us all informed of what's going on "out of town" - what new stuff we might make use of and what wont work in a small place like this. If we are interested he goes ahead and gets people in to demonstrate their products  and tell us about the details. Greg is pretty good at getting us discounts too. Now Greg's brother Ian works for the mayors office in the "waste management department" nowadays its all about the recycling but he still has to make sure that the stuff that cant be used any more gets disposed of properly. It depends on the type of waste he's dealing with that decides how it need to be treated and he has to know a lot about the different methods and when to use which ones. There are two people that keep the peace in town, Brent is the detective, investigating wrong doings and applying justice where necessary and Bart is the diplomat who smooths things over when any people have a dispute or disagreement. Brent is meticulous in his investigations and fair in the way he handles any situation he finds. Discretion is his byword. There's a rumour that Bart used to work for the United Nations but what ever his history there is no denying his ability to get apparently irreconcilable parties working together to their combined benefit. Someone who works closely with Bart is Brad, he is the translator in town. He has several languages that he can converse in but he can also explain things from someone's point of view or  and make it understandable to someone else. To keep things on the straight and narrow from a legal perspective is Ben the solicitor, making sure we all abide by the rules.Two people who make for an interesting evening's conversation if you get them together are Aaron and Grant, Aaron is the local planning inspector and Grant is an inventor of some reputation. Anything being constructed around here needs Aarons agreement. He's quite flexible in his rules though; if you can justify what you want to do with solid logic but he wont stand for any development going on without his inclusion. That gets a demolition notice and there's no argument. Grant as I mentioned is the inventor in town, if something can be improved or created then Grant is your man. He mainly works on his own but isnt averse to getting specific advice and assistance from specialist from out of town if they can help him finish his creations.There aren't too many people left for you to meet in the town, there's Rob, he's an ex professional sportsman. He played Hockey, Football, Cricket, you name it. He was in his element as goal keeper / wicket keeper and that shows in his personal life. He just goes about his business and people often don't even know that he's helped them. Really low profile, doesn't get any glory but saves people from lots of problems, even disasters on occasion. There goes Neil, he's a bit of an odd person, some people say he's gifted with special clairvoyant powers, personally I think he's got his ear to the ground and knows where to find out the important news as soon as its made public. Anyone getting a visit from Neil is best off to follow his advice though, he's usually spot on and you wont be caught by surprise if you follow his recommendations – wherever it comes from.Poor old Andrew is the last person to introduce you to. Andrew doesn't show himself too often but when he does it seems that people find a reason to blame him for their problems, whether he had anything to do with their predicament or not. In all honesty, without fail, and to his great credit, he takes it in good grace and never retaliates or gets annoyed when he's out and about.  It pays off too as its very often the case that those who were blaming him recently suddenly find they need his help and they readily forget the issues pretty rapidly.And then there's me, what do I do in town? Well, I'm just a DBA with a lot of hats. (Jackstown Pop. 1)

    Read the article

  • Indie Software Developers - How do I handle taxes?

    - by Connor
    I apologize if this is the wrong site to post on, perhaps someone could point me to the proper place if it is not. Hello, I am 17 years old and currently develop applications/games for Android and iPhone as well as develop internet websites and code a variety of my own projects. I have been very fortunate and have made a large amount of money and continue to make money online to the point where I do not need a stable job, though I'd like to get one after college. I've never held a job anywhere, and have never had to pay taxes. I'm coming into a lot of issues and I am quite confused. I get money from MANY sources- 15 different advertisement networks(!), 4 different payment processors, 5 different affiliate networks and a variety of other sources. All of them pay to different places and at different times (checking account, PayPal, reloadable debit card, ect.) I essentially have a list in a Notepad with names and login information for each source. I have also created a PHP script that uses cURL to grab all the revenue from each service, add it all up, then text me every few hours so I can keep track. It's a mess, but it's working OK, and I can create custom reports (for IRS?). But enough of that, my questions are about taxes in the US, and how indie developers handle it all. I'm at slightly over $250k so far this year, with negligible earnings last year. I have it all stockpiled in a bank account and haven't touched it, I'm a bit scared to. What do I file as? A sole proprietor, a business, just a regular person? How can I handle all of the different revenue sources? (AdSense, CJ, LinkShare) So far none of them have sent me any paperwork on taxes and I've read that I'm supposed to pay taxes quarterly? Do I need paperwork from EACH source to file? Or can I just say I got $x total and that'd be it? What percentage do you pay of total earnings? Average? Should I create an LLC? A corporation? Or stay as a developer? What would be the cheapest options? Could I go to jail? I haven't touched the money except a few dollars to help my parents pay the mortgage once. Any insight would be great. My parents have no idea what I should do, both have no forms of higher education and both have no high school diploma's. They just live day by day with simple jobs. I appreciate any help or experience with this.

    Read the article

  • Inside Red Gate - Be Reasonable!

    - by Simon Cooper
    As I discussed in my previous posts, divisions and project teams within Red Gate are allowed a lot of autonomy to manage themselves. It's not just the teams though, there's an awful lot of freedom given to individual employees within the company as well. Reasonableness How Red Gate treats it's employees is embodied in the phrase 'You will be reasonable with us, and we will be reasonable with you'. As an employee, you are trusted to do your job to the best of you ability. There's no one looking over your shoulder, no one clocking you in and out each day. Everyone is working at the company because they want to, and one of the core ideas of Red Gate is that the company exists to 'let people do the best work of their lives'. Everything is geared towards that. To help you do your job, office services and the IT department are there. If you need something to help you work better (a third or fourth monitor, footrests, or a new keyboard) then ask people in Information Systems (IS) or Office Services and you will be given it, no questions asked. Everyone has administrator access to their own machines, and you can install whatever you want on it. If there's a particular bit of software you need, then ask IS and they will buy it. As an example, last year I wanted to replace my main hard drive with an SSD; I had a summer job at school working in a computer repair shop, so knew what to do. I went to IS and asked for 'an SSD, a SATA cable, and a screwdriver'. And I got it there and then, even the screwdriver. Awesome. I screwed it in myself, copied all my main drive files across, and I was good to go. Of course, if you're not happy doing that yourself, then IS will sort it all out for you, no problems. If you need something that the company doesn't have (say, a book off Amazon, or you need some specifications printing off & bound), then everyone has a expense limit of £100 that you can use without any sign-off needed from your managers. If you need a company credit card for whatever reason, then you can get it. This freedom extends to working hours and holiday; you're expected to be in the office 11am-3pm each day, but outside those times you can work whenever you want. If you need a half-day holiday on a days notice, or even the same day, then you'll get it, unless there's a good reason you're needed that day. If you need to work from home for a day or so for whatever reason, then you can. If it's reasonable, then it's allowed. Trust issues? A lot of trust, and a lot of leeway, is given to all the people in Red Gate. Everyone is expected to work hard, do their jobs to the best of their ability, and there will be a minimum of bureaucratic obstacles that stop you doing your work. What happens if you abuse this trust? Well, an example is company trip expenses. You're free to expense what you like; food, drink, transport, etc, but if you expenses are not reasonable, then you will never travel with the company again. Simple as that. Everyone knows when they're abusing the system, so simply don't do it. Along with reasonableness, another phrase used is 'Don't be a ***'. If you act like a ***, and abuse any of the trust placed in you, even if you're the best tester, salesperson, dev, or manager in the company, then you won't be a part of the company any more. From what I know about other companies, employee trust is highly variable between companies, all the way up to CCTV trained on employee's monitors. As a dev, I want to produce well-written & useful code that solves people's problems. Being able to get whatever I need - install whatever tools I need, get time off when I need to, obtain reference books within a day - all let me do my job, and so let Red Gate help other people do their own jobs through the tools we produce. Plus, I don't think I would like working for a company that doesn't allow admin access to your own machine and blocks Facebook!

    Read the article

  • No HDMI audio in 13.04

    - by King84
    I have just upgraded from 12.10 to 13.04 and now everything works perfectly, except the fact that I have no audio via HDMI. I am using a Samsung tv-monitor connected via HDMI to my video card Asus EAH4670/DI/1GD3 (which has a Radeon HD 4670 gpu on it), installed phisically into my motherboard which is a MSI 770-C45. I am running kernel 3.9, I just have no sound. I tried downloading and installing https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+files/oem-audio-hda-daily-dkms_0.201304261252~raring1_all.deb , but without any good result. Please help, I need my audio back. In the end, this is my lspci command output. ale@beast:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 XT [Radeon HD 4670] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03) ale@beast:~$

    Read the article

  • JavaOne 2012 Call for Papers

    - by Tori Wieldt
    JavaOne 2012 is happening Sept. 30-Oct 4 in San Francisco. The Call For Papers for this conference is now open. Java Evangelist Arun Gupta, who was on one of the selection committees and will be again this year, provided some great tips for submission (and a peek into the submission process): JavaOne is a technology-focused conference so any product, marketing or seemingly marketish talk are put at the bottom of the list. Oracle Open World and Oracle Develop are better options for submitting product specific talks. Make your title catchy. Remember the attendees are more likely to read the abstract if they like the title. We try our best to recategorize the talk to a different track if it needs to but please ensure that you are filing in the right track to have all the right eyeballs looking at it. Also, it does not hurt marking an alternate track if your talk meets the criteria. Make sure to coordinate within your team before the submission - multiple sessions from the same team or company does not ensure that the best speaker is picked. In such case we rely upon your "google presence" and/or review committee's prior knowledge of the speaker. The reviewers may not know you or your product at all and you get 750 characters to pitch your idea. Make sure to use all of them, to the last 750th character. Make sure to read your abstract multiple times to ensure that you are giving all the relevant information ? Think through your presentation and see if you are leaving out any important aspects. Also look if the abstract has any redundant information that will not required by the reviewers. There are additional sections that allow you to share information about the speaker and the presentation summary. Use them to blow the horn about yourself and any other relevant details. Please don't say "call me at xxx-xxx-xxxx to find out the details." :-) The tracks this year are: Core Java Platform Development Tools and Techniques Emerging Langauges on the JVM Enterprise Services Architectures and the Cloud Java EE Web Profile and Platform Technologies Java ME, Java Card, Embedded, and Devices Java FX and Rich User Experiences IMPORTANT: Submit your proposal as soon as possible, the the Call for Papers closes April 9th, a mere three weeks away!  Follow these channels to get the latest news about #JavaOne 2012.  originally posted on blogs.oracle.com/javaone

    Read the article

  • JavaOne 2012 Call for Papers

    - by Tori Wieldt
    JavaOne 2012 is happening Sept. 30-Oct 4 in San Francisco. The Call For Papers for this conference is now open. Java Evangelist Arun Gupta, who was on one of the selection committees and will be again this year, provided some great tips for submission (and a peek into the submission process): JavaOne is a technology-focused conference so any product, marketing or seemingly marketish talk are put at the bottom of the list. Oracle Open World and Oracle Develop are better options for submitting product specific talks. Make your title catchy. Remember the attendees are more likely to read the abstract if they like the title. We try our best to recategorize the talk to a different track if it needs to but please ensure that you are filing in the right track to have all the right eyeballs looking at it. Also, it does not hurt marking an alternate track if your talk meets the criteria. Make sure to coordinate within your team before the submission - multiple sessions from the same team or company does not ensure that the best speaker is picked. In such case we rely upon your "google presence" and/or review committee's prior knowledge of the speaker. The reviewers may not know you or your product at all and you get 750 characters to pitch your idea. Make sure to use all of them, to the last 750th character. Make sure to read your abstract multiple times to ensure that you are giving all the relevant information ? Think through your presentation and see if you are leaving out any important aspects. Also look if the abstract has any redundant information that will not required by the reviewers. There are additional sections that allow you to share information about the speaker and the presentation summary. Use them to blow the horn about yourself and any other relevant details. Please don't say "call me at xxx-xxx-xxxx to find out the details." :-) The tracks this year are: Core Java Platform Development Tools and Techniques Emerging Langauges on the JVM Enterprise Services Architectures and the Cloud Java EE Web Profile and Platform Technologies Java ME, Java Card, Embedded, and Devices Java FX and Rich User Experiences IMPORTANT: Submit your proposal as soon as possible, the the Call for Papers closes April 9th, a mere three weeks away!  Follow these channels to get the latest news about #JavaOne 2012. 

    Read the article

  • Is my computer slow due to lack of swap

    - by Kristian Jensen
    A few months ago, I installed Ubuntu 12.04 alongside with Windows 7 on my Asus EEE-PC 1015bx. It has a tendency of freezing and when trying to investigate I found that a swap partition of only 256 MB had been created. The Asus EEE-PC 1015bx is born with 1 GByte RAM only and it is not possible to add further or exchange the existing 1 GByte with a larger card. When looking at the system monitor, it looks like all swap is being utilized along with 70-75% of the RAM, even with very few applications running. Can the lack of much swap space be the reason for my computer running slowly and at times freezing? How can I add a swap partition? Or should I add a swap file instead? At the moment, I see two partitions when viewing the system monitor: one 28.6 GByte ext4 partition which must be the one containing Ubuntu and one 100 GByte fuseblk partition which I assume is the one holding Windows. It shows that I have 18.6 GByte free space on the ext4 partition. Can I "take a bite" from the ext4 partition and convert this into a swap partition? I was thinking something like 3 GBytes for swap considering my limited RAM. I hope that someone can guide me through. Thank you. 20th Oct 2012 - Further details Thank you for below answer which I find very useful. I am certainly considering switching to one of your suggested shells as I can see from the Internet that many have posted that these require much fewer resources than ubuntu. It seems to me that lubuntu is the perfect match for my very limited computer. I will have to wait a few days, though, as I am presently limited by a very slow and restricted Internet connection via satellite. But will lubuntu install as simply another shell replacing unity or will it replace ubuntu all together? Will the software that I have installed under ubuntu still be accessible in lubuntu? And can I return to ubuntu if required? Regarding the actual question of swap: When I run gparted, it shows me that there is one ntfs partition of 100 GBytes from where it boots and the before mentioned ext4 partition of 28.6 GBytes is not mentioned. Could it be that my ubuntu installation resides inside this 100 GBytes ntfs partiotion? And if so, can I take a bite of this for my swap partition? Realising that gparted is shown in Danish, I hope that you can make out what I mean. System monitoring shows below details: Once again I sincerely hope that you can help. Thank you.

    Read the article

  • User-Defined Customer Events & their impact (FA Type Profile)

    - by Rajesh Sharma
    CC&B automatically creates field activities when a specific Customer Event takes place. This depends on the way you have setup your Field Activity Type Profiles, the templates within, and associated SP Condition(s) on the template. CC&B uses the service point type, its state and referenced customer event to determine which field activity type to generate.   Customer events available in the base product include: Cut for Non-payment (CNP) Disconnect Warning (DIWA) Reconnect for Payment (REPY) Reread (RERD) Stop Service (STOP) Start Service (STRT) Start/Stop (STSP)   Note the Field values/codes defined for each event.   CC&B comes with a flexibility to define new set of customer events. These can be defined in the Look Up - CUST_EVT_FLG. Values from the Look Up are used on the Field Activity Type Profile Template page.     So what's the use of having user-defined Customer Events? And how will the system detect such events in order to create field activity(s)?   Well, system can only detect such events when you reference a user-defined customer event on a Severance Event Type for an event type Create Field Activities.     This way you can create additional field activities of a specific field activity type for user-defined customer events.   One of our customers adopted this feature and created a user-defined customer event CNPW - Cut for Non-payment for Water Services. This event was then linked on a Field Activity Type Profile and referenced on a Severance Event - CUT FOR NON PAY-W. The associated Severance Process was configured to trigger a reconnection process if it was cancelled (done by defining a Post Cancel Algorithm). Whenever this Severance Event was executed, a specific type of Field Activity was generated for disconnection purposes. The Field Activity type was determined by the system from the Field Activity Type Profile referenced for the SP Type, SP's state and the referenced user-defined customer event. All was working well until the time when they realized that in spite of the Severance Process getting cancelled (when a payment was made); the Post Cancel Algorithm was not executed to start a Reconnection Severance Process for the purpose of generating a reconnection field activity and reconnecting the service.   Basically, the Post Cancel algorithm (if specified on a Severance Process Template) is triggered when a Severance Process gets cancelled because a credit transaction has affected/relieved a Service Agreement's debt.   So what exactly was happening? Now we come to actual question as to what is the impact in having a user-defined customer event.   System defined/base customer events are hard-coded across the entire system. There is an impact even if you remove any customer event entry from the Look Up. User-defined customer events are not recognized by the system anywhere else except in the severance process, as described above.   There are few programs which have routines to first validate the completion of disconnection field activities, which were raised as a result of customer event CNP - Cut for Non-payment in order to perform other associated actions. One such program is the Post Cancel Algorithm, referenced on a Severance Process Template, generally used to reconnect services which were disconnected from other Severance Event, specifically CNP - Cut for Non-Payment. Post cancel algorithm provided by the product - SEV POST CAN does the following (below is the algorithm's description):   This algorithm is called after a severance process has been cancelled (typically because the debt was paid and the SA is no longer eligible to be on the severance process). It checks to see if the process has a completed 'disconnect' event and, if so, starts a reconnect process using the Reconnect Severance Process Template defined in the parameter.    Notice the underlined text. This algorithm implicitly checks for Field Activities having completed status, which were generated from Severance Events as a result of CNP - Cut for Non-payment customer event.   Now if we look back to the customer's issue, we can relate that the Post Cancel algorithm was triggered, but was not able to find any 'Completed' CNP - Cut for Non-payment related field activity. And hence was not able to start a reconnection severance process. This was because a field activity was generated and completed for a customer event CNPW - Cut for Non-payment of Water Services instead.   To conclude, if you introduce new customer events that extend or simulate base customer events, the ones that are included in the base product, ensure that there is no other impact either direct or indirect to other business functions that the application has to offer.  

    Read the article

  • Ati Radeon HD 3200 Graphics driver - Installation Problem

    - by samufi
    I have a fresh installation of Ubuntu 12.04 x86 and I am trying to install the proprietary driver for my "Radeon HD 3200 Graphics" video card. I know that there are already many threads about this topic, but I did not find a solution for my problem: For the installation I followed exactly these instructions: What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? During the process I faced these problems: I executed ~$ debconf libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases and got: debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Keine Berechtigung Can't exec "libstdc++6": Datei oder Verzeichnis nicht gefunden at /usr/share/perl/5.14/IPC/Open3.pm line 186. open2: exec of libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 (translation of the German parts: "Keine Berechtigung" means: "no permission"; "Datei oder Verzeichnis nicht gefunden" means: "File or folder not found") Because I had no idea if it was a big issue, I just continued: ~$ sudo apt-get install ia32-libs There I got: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Paket ia32-libs ist nicht verfügbar, wird aber von einem anderen Paket referenziert. Das kann heißen, dass das Paket fehlt, dass es abgelöst wurde oder nur aus einer anderen Quelle verfügbar ist. E: Paket »ia32-libs« hat keinen Installationskandidaten (Translation: [...] the package ia32-libs is not available but is referenced by an other package [...] E: package »ia32-libs« has no installation candidate) Once more I went on. The next steps worked quite fine. But when I came to the point: ~$ sudo dpkg -i *.deb There I got A popup message, something like there was a problem with a system application but in the terminal no errors were reported, also the packages seemed to be installed. so now the Ati Catalyst Center works amdcccle but fglrxinfo gave me X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 139 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13 So there is something wrong. (Also there is not the possibility to enable these nice graphical features - the reason why I installed the proprietary driver) Because I worked with a completely fresh Installation I don't know how to fix the problem. If anybody could help I would be very tahnkful! =)

    Read the article

  • SQL SERVER – Recover the Accidentally Renamed Table

    - by pinaldave
    I have no answer to following question. I saw a desperate email marked as urgent delivered in my mailbox. “I accidentally renamed table in my SSMS. I was scrolling very fast and I made mistakes. It was either because I double clicked or clicked on F2 (shortcut key for renaming). However, I have made the mistake and now I have no idea how to fix this. I am in big trouble. Help me get my original tablename.” I have seen many similar scenarios in my life and they give me a very good opportunity to preach wisdom but when the house is burning, we cannot talk about how we should have conserved the water earlier. The goal at that point is to put off the fire as fast as we can. I decided to answer this email with my best knowledge. If you have renamed the table, I think you pretty much is out of luck. Here are few things which you can do which can give you idea about what your tablename can be if you are lucky. Method 1: (Not Recommended but try your luck) Check your naming convention of your system. I have often seen that many organizations name their index as IX_TableName_Colms or name their keys as FK_TableName1_TableName2_Cols. If your organization is following the same you can get the name from your table, you may refer your keys. Again, note that this is quite possible that your tablename was already renamed and your keys were not updated. This can easily lead you to select incorrect name. I think follow this if you are confident or move to the next method. Method 2: (Not Recommended but try your luck) This method is also based on your orgs naming convention. If you use the name of the table in any columnname (some organizations use tablename in their incremental identity column name), you can get that name from there. Method 3: (Not Recommended but try your luck) If you know where your table was used in your stored procedures, you can script your stored procedure and find the name of the table back. Method 4: (Try your luck) All the best organizations first create a data model of the schema and there is good chance that this table is used there, you should take your chances and refer original document. If your organization is good at managing docs or source code, you will get the name of the table back for sure. Method 5: (It WORKS but try on a development server) There is no sure way to get you the name of the table which you accidentally renamed however, there is one way which will work for sure. You need to take your latest full backup and restore it on your development server (remember not on production or where you have renamed this column). Now restore latest differential file of the full backup. Now restore all the log files one by one making sure that you are restoring before the point of time of you renamed the tablename. Now go to explore and this will give you the name of the table which you have renamed. If you are confident that the same table existed with the same name when the last full backup was made, you do not have to go to all the steps. You can just get the name of the table directly from last backup’s restore. Read the article about Backup Timeline. Wisdom: How can I miss to preach wisdom when I get the opportunity to do so? Here are a few points to remember. Use a different account to explore production environment. Do not use the same account which have all the rights and permissions all the time. Use the account which has read only permissions if there are no modification required. Use policy based management to prevent changes which are accidental. If there was policy of valid names, the accidental change of the table was not possible unless it was intentional delibarate changes. Have a proper auditing of the system in place. You can use DDL triggers but be careful with its usage (get it reviewed properly first). (Add your suggestion here) I guess Method 5 will work all the time (using point in time restore). Everything else is chance of luck and if you are lucky are bad – you will get further incorrect name. Now go back and read the first line of this blog. Out of five method four methods are just lucky guesses. The method 5 will work but again it is a lengthy process if the size of the database is huge or if you do not have full backup. Did I miss anything obvious? Please leave a comment and I will publish your answer with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >