Search Results

Search found 6171 results on 247 pages for 'debian installer'.

Page 212/247 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

  • Passing PATH through sudo

    - by whitequark
    In short: how to make sudo not to flush PATH everytime? I have some websites deployed on my server (Debian testing) written with Ruby on Rails. I use Mongrel+Nginx to host them, but there is one problem that comes when I need to restart Mongrel (e.g. after making some changes). All sites are checked in VCS (git, but it is not important) and have owner and group set to my user, whereas Mongrel runs under the, huh, mongrel user that is severely restricted in it's rights. So Mongrel must be started under root (it can automatically change UID) or mongrel. To manage mongrel I use mongrel_cluster gem because it allows starting or stopping any amount of Mongrel servers with just one command. But it needs the directory /var/lib/gems/1.8/bin to be in PATH: this is not enough to start it with absolute path. Modifying PATH in root .bashrc changed nothing, tweaking sudo's env_reset and keepenv didn't either. So the question: how to add a directory to PATH or keep user's PATH in sudo?

    Read the article

  • Windows XP corrupts registry every several hours

    - by Ilya Kazakevich
    There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

    Read the article

  • why is rdiff-backup not compatible with encfs ---reverse

    - by user330273
    I'm trying to use encfs with rdiff-backup to ensure that my backups to a remote server are encrypted. The easiest way to do this would be to use encfs --reverse - which means encfs will create a virtual encrypted file system, which I can then backup using rdiff-backup. Except that it doesn't work. Rdiff-backup fails every time with an "input/output error" on the encfs virtual filesystem. It seems I'm not the only one with this problem, but no one has said what the problem is: this person reported the same issue, but was just told to use sshfs instead (see below on that); in this question on serverfault, one of the answers just states that "rdiff-backup seems to have trouble accessing the EncFS-reverse filesystem." There's an open bug report on the Debian bug tracker(bug 731413, I can't post the link) on this bug, but it's been open since December 2013 with no response. Does anyone know what the problem actually is? Is there a workaround? I can't use the two most commonly suggested alternatives - sshfs and then running encfs on that, or using Duplicity - as both require a much higher bandwidth connection than I have access to (Duplicity requires regular full backups).

    Read the article

  • Windows 8, IIS8 how to make PHP imagick work

    - by Laci K
    I'm new to IIS server before IIS for 6 years I used Apache 2.X and with Apache imageMagick and its PHP module imagick worked just fine even with x64 version of PHP and Apache 2.4 and imageMagick. I tried to make imagick to work with IIS8 but it wont work. I always get the typical PHP startup warning in my log PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\iis express\PHP\v5.4\ext\php_imagick.dll' - %1 is not a valid Win32 application. in Unknown on line 0 And the next thing why is IIS loading php from IIS express folder if I have php in the program files? But actually I dont care until it works :) So what I did so far I unistalled imageMagick 6.7.X 64bit version and installed the latest x86 version, tested it in command line and it worked, than I looked up on net the latest imagick DLL which was I think the 3.1.0RC2 (founded here http://www.peewit.fr/imagick/) than I copied the dll to PHP's ext folder than edited php.ini and added the imagick to the dynamic extensions after that I restarted IIS and than nothing :( I got the error which I wrote earlier. Today I installed PEAR package Installer because I read somewhere that someone made it work with it but he also mentioned, that he needed to comply wincache too. Isn't there any easier solutions to make it work? Could someone maybe write me a step by step guide how to make this work.

    Read the article

  • How does the "Steam" platform work? Is it DRM? Can I trust "Steam"-powered software? [closed]

    - by Chris W. Rea
    So – I just bought the new game Supreme Commander 2. This question is not about the game, but about the online software installation platform that it seems to require. I haven't bought a game in a long time, and I'm puzzled: Apparently, SC2 is a "Steam"-powered game. When I went to install the game, it asked me to either create a new Steam account, or log in with an existing account. I clicked "Cancel" because I don't plan to play online and I don't want anything unnecessary installed on my computer, since I only plan to play single player! However, after clicking "Cancel", the installer asked for my confirmation that I indeed wanted to cancel installation of the game! I thought I was just canceling the "online" portions! So I really want to know: How do "Steam" powered games work? Is this essentially a form of DRM (Digital Rights Management)? Can I trust this software platform? Has anybody done any independent verification on how this platform works? (I'm very leery of any DRM after the Sony BMG CD copy protection scandal. Thank goodness for Mark Russinovich.) Does the "Steam" platform install anything particularly nasty or unwanted on my computer? High-rep users: Please vote to reopen this question. It is not about the game, but about the software update platform / updater / DRM. Imagine if the software in question were a productivity application. The issues remain the same.

    Read the article

  • How to make new file permission inherit from the parent directory?

    - by Wai Yip Tung
    I have a directory called data. Then I am running a script under the user id 'robot'. robot writes to the data directory and update files inside. The idea is data is open for both me and robot to update. So I setup the permission and owner group like this drwxrwxr-x 2 me robot-grp 4096 Jun 11 20:50 data where both me and robot belongs to the 'robot-grp'. I change the permission and the owner group recursively like the parent directory. I regularly upload new files into the data directory using rsync. Unfortunately, new files uploaded does not inherit the parent directory's permission as I hope. Instead it looks like this -rw-r--r-- 1 me users 6 Jun 11 20:50 new-file.txt When robot tries to update new-file.txt, it fails due to lack of file permission. I'm not sure if setting umask helps. In anycase the new files does not really follow it. $ umask -S u=rwx,g=rx,o=rx I'm often confounded by Unix file permission. Do I even have a right plan? I'm using Debian lenny.

    Read the article

  • IIS 7.5 FTP Service crashes after installation of Advanced Logging 1.0 Module

    - by Jeremy
    I've recently been tasked with setting up two new productions servers for an ASP.Net application. The servers sit behind a F5 Load Balancer, which in turn forwards the end users IP address forward via the standard X_Forwarded_For HTTP Header. All of the reading that I have done suggests that I need to install the IIS Advanced Logging Module in order to take advantage of the X_Forwarded_For HTTP Header. Some quick background: Both of the web servers are Windows 2008 R2 Standard (x64), with IIS 7.5 installed and configured. The FTP Role has also been installed, configured and is operational. The Issue After installing the IIS Advanced Logging module via the Web Platform Installer, I noticed the following Error in the Event Viewer: The FTP Service encountered an error trying to read configuration data from file \?\C:\Windows\system32\inetsrv\config\applicationHost.config, line number 374. The error message is: Unrecognized element 'advancedLogging' Trying to connect over FTP to either of the web servers results in a 530. I've spent 2 hours scouring Google trying to find a solution, short of uninstalling the Advanced Logging Module. As far as I can tell, there is no way to turn off Advanced Logging on a site per site basis. Help would be appreciated.

    Read the article

  • Need to boot into chkdsk from USB on Windows netbook

    - by Gaz Davidson
    While attempting to install Ubuntu on a 32-bit Windows XP netbook, the partition resize operation failed due to inconsistencies in the NTFS filesystem (lesson learned: run chkdsk /f in Windows before trying to resize a partition in Linux). Now the installer only gives the option to replace Windows with Ubuntu, the partition can't be resized in gparted, which displays a red exclamation mark and an error log when you click it. To make matters worse, we're also unable to reboot into Windows to get at chkdsk. We get a BSoD when choosing any of the options (including the DOS recovery console thing). The netbook has no CD-ROM drive, contains no recovery image and our only connection to the Internet is via the hotspot on my mobile device. We don't have Windows recovery CDs, but we do have a USB flash drive. We have a 64-bit laptop running Ubuntu 12.04 and Windows 7 (both 64-bit). So, on to the question: Is anyone aware of a way to get into a DOS recovery console and run chkdsk from a USB disk drive, without having to pirate Windows XP or download hundreds and hundreds of megabytes of crap? If it was my device I'd just flatten it, but it isn't. Please help!

    Read the article

  • CentOS 5.5 remote kickstart installation stalls at "Starting install process." How to debug?

    - by ewwhite
    Hello, I'm having a difficult time with a remote CentOS 5.5 kickstart installation on an HP ProLiant DL360 G6. This is in an environment where I maintain an internal CentOS yum repository. The kickstart installation and post scripts have been tested and normally work. This hardware is also common in this environment, so I do not believe that it is a factor. Unfortunately, I'm having problems with a specific server install. The system is remote to the yum repository at a distance of 500 miles. They are connected over a private low-latency 100-megabit layer 2 connection (26ms round-trip). I'm mounting the 10mb CentOS 5 netinstall ISO image via an HP ILO remote console. The initial boot parameters are: linux ks=http://yum.abctrading.com/prop.cfg ksdevice=eth0 ip=x.x.x.x dns=x.x.x.x netmask=255.255.255.0 gateway=x.x.x.x I'm using the url --url http://ks.abctrading.com/5.5/os/x86_64/ method of installation. This quickly boots into the anaconda installer, pulls the kickstart config and formats the drives. The process eventually halts at the screen below, reading "Starting install process.". Going to the other virtual consoles give the second image below. The process stalls at this point and cannot proceed with the rest of the installation. Running the same kickstart config locally works just fine. I've tried mounting the boot ISO from the console as well as from the ILO2 command line pointing to a locally-hosted boot ISO via http. How can I debug this? Are there any options I've overlooked?

    Read the article

  • Wrong CSS mime type with Roundcube 0.5 beta and nginx

    - by Julien Vehent
    I'm running into a CSS problem. This is a setup based on Debian Squeeze (nginx/0.7.67, php5/cgi) on which I installed the latest Roundcube 0.5 beta. PHP is properly processed, login works fine but the CSS files are not loaded and Firefox is throwing the following errors: Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/common.css?s=1290600165 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/mail.css?s=1290156319 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 As far as I understand, nginx doesn't see the .css extension (because ofthe ?s= argument) and thus set the mime type with the default value, being text/html. Should I fix this in nginx (and how ?) or is it roundcube's related ? Edit: It seems that it's nginx related. The content-type isn't set for any other type than text/html. I had to include manually the following declarations to force CSS and JS content-types. That's ugly, and I never had the problem before... any idea ? location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; }

    Read the article

  • Windows 7 64-bit installation from alternative media (no DVD/USB Flash drive)

    - by Niels Willems
    Greetings I currently have Windows 7 x86 installed on my computer. I want to install Windows 7 x64 on a different partition on my computer. However there is a little issue, I cannot run the x64 install from Windows 7 x86 which I currently have. I was planning to Install Windows 7 x64 on another partition to then boot up from that partition to install it on the partition I actually want my OS on. Once that is complete I could just format the partition from the Windows 7 x64 that I didn't need anymore. But the installer will not run from the x86 version of Windows 7 even though I do not want to upgrade that Windows directly. The reason I'm doing this in such a weird way is that my optical drive is broken and I'm really not into buying a new one since I would use it like once every year or so. I also don't have a USB Flash Drive which is big enough to hold the installation files. As far as I'm aware I cannot use an external hard drive such as this one, which I do have. Are there any alternatives in which I can install Windows 7 x64 or am I forced into buying a USB Flash Drive or new optical drive? Thank you in advance for your replies. Edit: This picture shows my current partitions on my laptop. I want to get Windows 7 x64 on the C partition but have to install it first on the F partition to then boot up the F partition windows to format C and install x64 on that one. My external drive is J. Edit 2: No alternative computer which has a DVD drive, install files are located on an iso from MA3D. To install my 32 bit version I mounted the ISO in Daemon Tools to replace my Windows Vista but since I cannot run 64 bit into my 32 bit OS this doesn't work.

    Read the article

  • How to get multipath working for Ubuntu Server 12.04

    - by mlampi
    I'm working on a project which aims to make use of Ubuntu servers running on enterprise class hardware. In our case that means IBM HS23E blade servers, QLogic 4GB fibre channel extension cards and quite old IBM DS4500 disk array with two controllers. At the moment we have fibre channel as only boot option and Ubuntu Server 12.04 installed just fine and is able to boot without multipath. I'm not a linux professional myself but in our team we have people who will understand the technical stuff. Don't let my post confuse :) The current situation is that we have only one fibre channel connection to a single disk array controller. Real life case would be of course quite different. At minimum we should have two fibre channel ports connected to two different switches and two different controllers. However, we have no idea how to set up multipath tool. Is the DM-MPIO the right software? At minimum we should be able to boot when multiple connections are available and achieve fault tolerance when any of them should be down. Since the disk array is not the latest hardware, I managed to find RDAC driver sources only for 2.6.x kernel. And we have 3.2.x. Another issue is to build a multipath.conf. The said driver sources are from IBM support and the QLogic drivers provided to Ubuntu installer are from Ubuntu site. It seems that RHEL and SLES would have near out of the box support but that is not an option for our project. Actual questions: - What is the recommended software tool for multipath for Ubuntu Server 12.04? - Is there available pre-made configurations or templates? Does it require disk array / controller specific settings or do a more generic config work? - Do you have expriences on similar setup and like to share the knowledge? I'll provide you with any additional information you might require. Thanks in advance.

    Read the article

  • Netbook thinks it is a desktop

    - by Narcolapser
    Question: Are, and if so what, there packages for download that I can get netbook to understand it is not a desktop and that it is a netbook. Info: I'm running an Acer Aspire One with ubuntu desktop 9.10. I tried Ubuntu Netbook Remix first but it has graphics issues with the aspire one. So I changed to Ubuntu Desktop. It was the only distro (after debian, centOS, Fedora, and Knoppix all failed me) that I managed to get working. The only thing is that it is having issues doing things that a netbook/laptop should be doing. most notably is that it will run it's battery dead if I close the screen and throw it into my back pack. It seems to just stay fully on and runs it's self to death. also it will lock up some times if I close the screen and come back to it 10 or 20 minutes later. It also won't retain volume settings when I reboot, as well as screen brightness. and just a couple of other things that I can't quite put my finger on, but just seem amiss. like I said, Essentially my netbook thinks it is a desktop, how can I fix this? ~N

    Read the article

  • Upgrade an Ubuntu 8.04 installation with VMware Server 1.0.8 and lots of guest OSes to Something Els

    - by Glyph
    I have an Ubuntu 8.04 (Hardy Heron) host machine which is running a whole slew of virtual machines in VMWare Server 1.0.8. Among other guest OSes, there is every release version of Ubuntu since 6.06, OpenSolaris 2009.06, and Windows XP. Right now I access these VMs from a variety of client OSes as well; Linux and Windows via the VMWare server console, and MacOS via X-forwarding the host machine's server console. I'd like to upgrade the host to Ubuntu 10.04 (Lucid Lynx), but from what I can tell, getting VMWare Server 1.x to work on a more recent version of Linux is a real pain. While VMware Server 2.x is a bit easier, it's still not packaged as Debian packages, so installing security updates is a big chore. As long as I'm upgrading anyway, I'd like to move to a virtualization solution that will allow me to automate applying updates. The options that I'm aware of right now are KVM (managed via virt-manager) and VirtualBox (as managed by its own tools or via its own libvirt bindings), but I'm open to other suggestions. For each option, I'd like to know how do I convert my guest images to the new format? am I going to have to re-activate my Windows guests (alternatively, "If the virtual hardware is different by default, can I avoid re-activation by changing some virtualization configuration to provide me with more similar virtual hardware") what are the management options like for each client OS (mac, linux, windows)? Thanks.

    Read the article

  • Silent install FirePro v4900 Driver on Windows Embedded 7 Standard

    - by Birgit_B
    I'm trying to install the Drivers for a FirePro v4900 on a Windows Embedded 7 Standard 64bit OS. I want the system to be as small as possible, so i would rather not install the whole catalyst control center, but only the necessary drivers. Because the installation should be accomplished absolutely unattended, the installation process of the FirePro-Driver should also be done without any user interaction. I see two possible solutions for the Problem: Install only the Drivers: Is it possible to solely install the necessary drivers? How would i achieve that? This solution would be the preferred one, because of the smaller footprint. Silent custom install the provided "FirePro_8.911.3.3_VistaWin7_X32X64_135673.exe" (found at ATI FirePro™ Driver). Is there a way, to do that? Thank you in advance for your support! Update: I managed to accomplish a silent installation. I extracted the contents of the above mention installer-file and ran \$_OUTDIR\Bin64\Setup.exe -Install. (There are some other Parameters, just run Setup.exe /?). But i couldn't achieve to just install the drivers without the Cataclyst Control Center, and it seams the Control Center has some unfulfilled dependencies and so it crashes...

    Read the article

  • x display problems in centos 5.5

    - by John Ruiz
    I have a Dell E510 desktop with a geForce 7200 instead of the ATI x600 it came with. I have attempted to install CentOS 5.4 x86_64 (DVD), CentOS 5.5 (net install), and CentOS 5.5 x86_64 (DVD). Gnome desktop. All of these run into the same issue. When I put the DVD into the machine and reboot, the installer begins and I select "graphical install". I see text that say anaconda is starting, and then my screen goes nuts. It's not black, but rather a screen full of diagonal stripes or multiple colors. So I attempted to do a text install of CentOS 5.5 (DVD) and got it installed. When I booted for the first time, I logged into the virtual console and started X (startx). The desktop came up and it already had the display properties GUI up. I changed it from 800x600 to 1680x1050, saw that there were updates available, installed them, and then rebooted. When I start X from the virtual console this time, I get exactly the same display problem as I described before. Does anyone know what might be causing this and what I can do about it? edit: I should also mention that I'm capable of installing Windows 7 and Ubuntu 10.04 onto this machine with absolutely no issues at all.

    Read the article

  • How to move the Windows 7 bootloader to the Windows 7 partition?

    - by pauldoo
    I recently installed Windows 7 in a triple boot setup alongside XP and Linux. When I was finished and was in the process of restoring the bootloader for Linux I discovered something strange about what Windows 7 had done. I discovered that Windows 7 had not installed a bootloader to it's own partition, and instead had instead set up a bootloader on the pre-existing XP partition that offers a choice between 7 and XP. This behaviour has been noticed by others. Now my booting is slightly odd. I have GRUB on the MBR which lets me choose between Linux and Windows. When I select Windows I have Grub boot to the XP partition where I get the 2nd choice between 7 and XP. Why doesn't the Windows 7 installer put the Windows 7 bootloader on the Windows 7 partition like all previous MS OSs? This is now going to be a real problem for me, as I now want to wipe the XP partition and install something else there (probably another non-MS OS). How can I move the bootloader for Windows 7 onto the Windows 7 partition, thus making it bootable and allowing me to safely wipe the XP partition?

    Read the article

  • Problems mounting HPUX LVM+VXFS filesystem on Linux

    - by golimar
    I have a physical disk from a HPUX system that I need to access from a Debian Linux for ia64 system. From the hpux-lvm-tools project I have the tools to access the HPUX LVMs (Linux LVM has a different format) and I also have the freevxfs driver. I know beforehand that the disk has three partitions, and that the biggest one contains LVM volumes, and some of those are VxFS filesystems. I can see the partitions: # cat /proc/partitions major minor #blocks name 8 32 143374744 sdc 8 33 512000 sdc1 8 34 142452736 sdc2 8 35 409600 sdc3 It finds a VG in one of the disk partitions: # ./vgscan_hpux On /dev/sdc2 - vg1328874723 # ./pvdisplay_hpux /dev/sdc2 PV General Information ---------------------- VG Creation Time Fri Feb 10 12:52:03 2012 Physical Volume ID 1766760336 1328874723 Volume Group ID 1766760336 1328874723 Physical Volumes in VG 1766760336 1328874723 VG Actication Mode 0 - LOCAL PE Size 64 MBs Lvol sizes ---------- lvol1 - 8 Extents - 512 MBs lvol2 - 192 Extents - 12288 MBs lvol3 - 16 Extents - 1024 MBs ... lvol21 - 13 Extents - 832 MBs lvol22 - 224 Extents - 14336 MBs lvol23 - 16 Extents - 1024 MBs Then I activate that VG and some new devices appear in my system: # ./pvactivate_hpux /dev/sdc2 VG vg1328874723 Activated succesfully with 23 lvols. # # ll /dev/mapper/ total 0 crw------- 1 root root 10, 59 Nov 26 16:08 control lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol1 -> ../dm-0 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol10 -> ../dm-9 ... lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol8 -> ../dm-7 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol9 -> ../dm-8 But: # mount /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: you must specify the filesystem type # mount -t vxfs /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: wrong fs type, bad option, bad superblock on /dev/mapper/vg1328874723-lvol18, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # lsmod |grep vxfs freevxfs 23905 0 I also tried to identify the raw data with the file command and it just says 'data': # file -s /dev/mapper/vg1328874723-lvol18 /dev/mapper/vg1328874723-lvol18: symbolic link to `../dm-17' # file -s /dev/dm-17 /dev/dm-17: data # Any clues?

    Read the article

  • Recovering data from mangodb raw files

    - by Jin Chen
    we use mongodb for our database and set the replset(two servers), but we mistakenly deleted some raw files that under /path/to/dbdata on both servers, after we used tool to get back the deleted files(we ran the extundelete on both server and mix the result together), like database.1, database.2 etc. we could not start the mongod, it raised the following error when starting mongod or executing mongodump, here is the console output: root@mongod:/opt/mongodb# mongodump --repair --dbpath /opt/mongodb -d database_production Thu Aug 21 16:22:43.258 [tools] warning: repair is a work in progress Thu Aug 21 16:22:43.258 [tools] going to try and recover data from: database_production Thu Aug 21 16:22:43.262 [tools] Assertion failure isOk() src/mongo/db/pdfile.h 392 0xde1b01 0xda42fd 0x8ae325 0x8ac492 0x8bd8e0 0x8c1c51 0x80e345 0x80e607 0x80e6a4 0x6db92a 0x6dc1ff 0x6e0db9 0xd9e45e 0x6ccdc7 0x7f499d856ead 0x6ccc29 mongodump(_ZN5mongo15printStackTraceERSo+0x21) [0xde1b01] mongodump(_ZN5mongo12verifyFailedEPKcS1_j+0xfd) [0xda42fd] mongodump(_ZNK5mongo7Forward4nextERKNS_7DiskLocE+0x1a5) [0x8ae325] mongodump(_ZN5mongo11BasicCursor7advanceEv+0x82) [0x8ac492] mongodump(_ZN5mongo8Database19clearTmpCollectionsEv+0x160) [0x8bd8e0] mongodump(_ZN5mongo14DatabaseHolder11getOrCreateERKSsS2_Rb+0x7b1) [0x8c1c51] mongodump(_ZN5mongo6Client7Context11_finishInitEv+0x65) [0x80e345] mongodump(_ZN5mongo6Client7ContextC1ERKSsS3_b+0x87) [0x80e607] mongodump(ZN5mongo6Client12WriteContextC1ERKSsS3+0x54) [0x80e6a4] mongodump(_ZN4Dump7_repairESs+0x3a) [0x6db92a] mongodump(_ZN4Dump6repairEv+0x2df) [0x6dc1ff] mongodump(_ZN4Dump3runEv+0x1b9) [0x6e0db9] mongodump(_ZN5mongo4Tool4mainEiPPc+0x13de) [0xd9e45e] mongodump(main+0x37) [0x6ccdc7] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f499d856ead] mongodump(__gxx_personality_v0+0x471) [0x6ccc29] assertion: 0 assertion src/mongo/db/pdfile.h:392 Thu Aug 21 16:22:43.271 dbexit: Thu Aug 21 16:22:43.271 [tools] shutdown: going to close listening sockets... Thu Aug 21 16:22:43.271 [tools] shutdown: going to flush diaglog... Thu Aug 21 16:22:43.271 [tools] shutdown: going to close sockets... Thu Aug 21 16:22:43.272 [tools] shutdown: waiting for fs preallocator... Thu Aug 21 16:22:43.272 [tools] shutdown: closing all files... Thu Aug 21 16:22:43.273 [tools] closeAllFiles() finished Thu Aug 21 16:22:43.273 [tools] shutdown: removing fs lock... Thu Aug 21 16:22:43.273 dbexit: really exiting now my env: 1) Debian 3.2.35-2 x86_64(it's a XEN virtual machine) 2) mongodb 2.4.6 and we did not delete the .0 and .ns files we tried to create a new database with the same name and copy these db.ns and db.2, db.3 to the new db, we still met the same error. is there any way to check the valid of raw .ns and datafiles, and how to recover the database?

    Read the article

  • Is it possible/practical to install and run Linux on a USB flash drive?

    - by Graeme Donaldson
    I'm going to replace my old 2004 vintage desktop PC soon and I have an idea of what I want to do, I'm just not sure if it's possible or realistic. In the time since I built the old PC it has slowly become less used as a PC and more as a file server, so I figured I'd build a small file server which could also function as a router/DHCP/DNS/whatever box. The idea is to base it on an Atom system. I have my eye on the Intel D510MO for the moment. This supports 2 SATA disks, and I'd prefer to dedicate those to data storage. I'd like to install Ubuntu Server or maybe Debian on a 8/16GB USB flash drive. I have seen plenty of tutorials on how to perform an installation from a USB drive, but I can't seem to find any info on actually booting and running the OS from USB flash. Is this even possible? Is it practical? This box will mostly be used for: Making backups of mine and my wife's notebooks via LAN. Will use SMB or NFS for this. Digital media storage, which will be accessed by a Mede8er box with no storage of its own. I will most likely use NFS for this.

    Read the article

  • GRE Tunnel over IPsec with Loopback

    - by Alek
    Hello, I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

    Read the article

  • What does it mean for the file name to be shown with red background

    - by user56614
    I'm trying to install Cisco VPN client on Linux Ubuntu 10.04. The installer creates the directory, places all the necessary files in it, and then fails to launch the binary. I tried to launch it myself, the system rebukes me too. Closer inspection yields the following: eugene@eugene-desktop:/opt/cisco/vpn/bin$ sudo chmod u+x vpnagentd eugene@eugene-desktop:/opt/cisco/vpn/bin$ ls -la total 5124 drwxr-xr-x 2 root root 4096 2010-10-23 11:51 . drwxr-xr-x 6 root root 4096 2010-10-23 11:51 .. -rwxr-xr-x 1 root root 1607236 2010-10-23 11:51 vpn -rwsr-xr-x 1 root root 1204692 2010-10-23 11:51 vpnagentd -r--r--r-- 1 root root 697380 2010-10-23 11:51 vpndownloader.sh -rwxr-xr-x 1 root root 1712708 2010-10-23 11:51 vpnui -rwxr-xr-x 1 root root 3654 2010-10-23 11:51 vpn_uninstall.sh eugene@eugene-desktop:/opt/cisco/vpn/bin$ ./vpnagentd bash: ./vpnagentd: No such file or directory eugene@eugene-desktop:/opt/cisco/vpn/bin$ sudo ./vpnagentd sudo: unable to execute ./vpnagentd: No such file or directory The file name "vpnagentd" is shown in white letters with red background. The other three executables are in green letters with black background, as expected. Any ideas?

    Read the article

  • xt_TCPMSS: bad length messages

    - by Matic
    Hey! I'm getting loads of messages like: Jun 23 10:24:20 awakening kernel: [ 1691.596823] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663362] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663495] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663588] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663671] xt_TCPMSS: bad length (1440 bytes) Jun 23 10:24:26 awakening kernel: [ 1697.062914] xt_TCPMSS: bad length (474 bytes) Jun 23 10:24:26 awakening kernel: [ 1697.305525] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:27 awakening kernel: [ 1698.946633] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:36 awakening kernel: [ 1707.481198] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:37 awakening kernel: [ 1708.723526] xt_TCPMSS: bad length (805 bytes) Jun 23 10:24:38 awakening kernel: [ 1709.599461] xt_TCPMSS: bad length (805 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.211052] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.260588] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.976058] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:43 awakening kernel: [ 1714.225209] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:43 awakening kernel: [ 1714.914961] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:55 awakening kernel: [ 1726.192696] xt_TCPMSS: bad length (1480 bytes) Jun 23 10:24:55 awakening kernel: [ 1726.192825] xt_TCPMSS: bad length (1480 bytes) In my dmesg/syslog. This linux machine is among other things used as an internet gateway. Connection is over PPPoE. I have the following line in my iptables script: $IPT -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu # PPPoE fix The frequency of this messages increased 10x when I upgraded from Debian lenny with 2.6.27 to squeeze with 2.6.32 few days ago. Why am I seeing this messages and how can I fix them?

    Read the article

  • CDROM does not appear on desktop, MACOS 10.5.7

    - by Cheeso
    When I pop a CDROM into the drive of my Macbook Pro, It spins up, I hear it, but no icon appears on the desktop. (I think it's 10.5.7; actually not sure how to verify this on Mac, but I think I saw a 10.5.7 flash by somewhere). In the finder preferences, I have "Show these items on the Desktop" set to show HDs, External Disks, and CDs, DVDs, and ipods. All three of those are checked. I do see the internal HD on the desktop. In Disk utility I can see the CD/DVD hardware. It says "MATSHITA DVD-R UJ-857E...". From Disk Utility I can eject the drive. But in Finder, there is never a CD/DVD listed under "Devices". When I insert a disk, nothing happens, I cannot see it. I also cannot boot from bootable CDROMs by holding C down . Suggestions? I am not very experienced with Mac; I have used Windows for years. EDIT Two updates: I saw this article on support.apple.com, and modified the hostconfig appropriately. It did not have the AUTODISKMOUNT entry, so I added one, rebooted. Same behavior. It does not see the CDROM in Finder, does not mount it on desktop. I put an old manufactured CDROM into the drive, and voila! it showed up on the desktop. The CD that does not appear is a GNome Partition Editor Live CD, which I guess is based on debian. That CD boots in other (non-Mac) PCs. I want to use this to adjust the Bootcamp partition. Suggestions?

    Read the article

  • Xen domU passwd file overwritten with console log output

    - by malfy
    I was setting up a Debian Xen domU and after booting it fine, I added basic configuration to /etc/network/interfaces and ran /etc/init.d/networking restart. This failed so I decided to reboot. After the reboot I also ran xm shutdown box. When dropped to a shell prompt it wouldn't let me login. Upon further inspection, I now have garbage in some critical files in /etc: root@box:/# tail +1 mnt/etc/{passwd-,shadow} tail: cannot open `+1' for reading: No such file or directory ==> mnt/etc/passwd- <== 0000000000100000 (reserved) Nov 23 02:02:39 box kernel: [ 0.000000] Xen: 0000000000100000 - 0000000004000000 (usable) Nov 23 02:02:39 box kernel: [ 0.000000] DMI not present or invalid. Nov 23 02:02:39 box kernel: [ 0.000000] last_pfn = 0x4000 max_arch_pfn = 0x1000000 Nov 23 02:02:39 box kernel: [ 0.000000] initial memory mapped : 0 - 033ff000 Nov 23 02:02:39 box kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000004000000 Nov 23 02:02:39 box kernel: [ 0.000000] NX (Execute Disable) protection: active Nov 23 02:02:39 box kernel: [ 0.000000] 0000000000 - 0004000000 page 4k Nov 23 02:02:39 box kernel: [ 0.000000] kernel direct mapping tables up to 4000000 @ 7000-2c000 Nov 23 02:02:3 ==> mnt/etc/shadow <== 32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 Nov 23 02:02:39 box kernel: [ 0.000000] PERCPU: Embedded 15 pages/cpu @c15b0000 s37688 r0 d23752 u65536 Nov 23 02:02:39 box kernel: [ 0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096 Nov 23 02:02:39 box kernel: [ 0.000000] pcpu-alloc: [0] 0 Nov 23 02:02:39 box kernel: [ 0.000000] Xen: using vcpu_info placement Nov 23 02:02:39 box kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16160 Nov 23 02:02:39 box kernel: [ 0.000000] Kernel command line: root=/dev/mapper/xen-guest_root ro quiet root=/dev/xvda1 ro Nov 23 02:02:39 box kernel: [ 0.000000] PID hash table entries: The garbage is also present in the passwd file and the group file (although I didn't paste that above since I have since ran debootstrap on the filesystem again). Does anyone have any insight into what happened and why?

    Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >