Search Results

Search found 11524 results on 461 pages for 'insurance networking news'.

Page 213/461 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

  • Understanding tcptraceroute versus http response

    - by kojiro
    I'm debugging a web server that has a very high wait time before responding. The server itself is quite fast and has no load, so I strongly suspect a network problem. Basically, I make a web request: wget -O/dev/null http://hostname/ --2013-10-18 11:03:08-- http://hostname/ Resolving hostname... 10.9.211.129 Connecting to hostname|10.9.211.129|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: ‘/dev/null’ 2013-10-18 11:04:11 (88.0 KB/s) - ‘/dev/null’ saved [13641] So you see it took about a minute to give me the page, but it does give it to me with a 200 response. So I try a tcptraceroute to see what's up: $ sudo tcptraceroute hostname 80 Password: Selected device en2, address 192.168.113.74, port 54699 for outgoing packets Tracing the path to hostname (10.9.211.129) on TCP port 80 (http), 30 hops max 1 192.168.113.1 0.842 ms 2.216 ms 2.130 ms 2 10.141.12.77 0.707 ms 0.767 ms 0.738 ms 3 10.141.12.33 1.227 ms 1.012 ms 1.120 ms 4 10.141.3.107 0.372 ms 0.305 ms 0.368 ms 5 12.112.4.41 6.688 ms 6.514 ms 6.467 ms 6 cr84.phlpa.ip.att.net (12.122.107.214) 19.892 ms 18.814 ms 15.804 ms 7 cr2.phlpa.ip.att.net (12.122.107.117) 17.554 ms 15.693 ms 16.122 ms 8 cr1.wswdc.ip.att.net (12.122.4.54) 15.838 ms 15.353 ms 15.511 ms 9 cr83.wswdc.ip.att.net (12.123.10.110) 17.451 ms 15.183 ms 16.198 ms 10 12.84.5.93 9.982 ms 9.817 ms 9.784 ms 11 12.84.5.94 14.587 ms 14.301 ms 14.238 ms 12 10.141.3.209 13.870 ms 13.845 ms 13.696 ms 13 * * * … 30 * * * I tried it again with 100 hops, just to be sure – the packets never get there. So how is it that the server does respond to requests via http, even after a minute? Shouldn't all requests just die? I'm not sure how to proceed debugging why this server is slow (as opposed to why it responds at all).

    Read the article

  • VLC RTP Streaming in FC12

    - by Matt D
    I'm trying to get VLC to work streaming RTP audio/video over my office network. The goal is multicast a/v streaming. In all test cases, we are streaming from VLC to VLC. I am able to stream from Windows to Windows, and from Fedora to Windows, but not from Windows to Fedora. Additionally, I am unable to receive a LOCAL stream from one instance of VLC to another, within Fedora. I don't see any reason why this would be. The buffer indicator (where the elapsed/total time is normally displayed) never shows any connectivity, so it would appear to be a network problem, but since I am able to stream from Fedora to Windows (same IP, same port) I thought it would be something else. Does anyone know of a solution to this issue?

    Read the article

  • Wi-Fi Stick with ZD1211 chip refuses to work on Ubuntu >8.10. No clue.

    - by Benjamin Maus
    I have a machine running Ubuntu 9.10 (Karmic *x86_64*). Everything is running smooth so far, except for the Wi-Fi USB Stick. The same device worked perfectly in 8.10. The wireless device is a GW-US54GXS using the Zydas Zd1211 chipset. Dmesg output after plugging in: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' [ 196.304209] zd1211rw 2-1:1.0: phy0 [ 196.304227] usbcore: registered new interface driver zd1211rw [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Syslog output: Nov 5 11:20:24 somesystem kernel: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' Nov 5 11:20:24 kierkegaard NetworkManager: <info> Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/ieee80211/phy0/rfkill0) (driver <unknown>) Nov 5 11:20:24 somesystem kernel: [ 196.304209] zd1211rw 2-1:1.0: phy0 Nov 5 11:20:24 somesystem kernel: [ 196.304227] usbcore: registered new interface driver zd1211rw Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'zd1211rw') Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2 Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): now managed Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): device state change: 1 -> 2 (reason 2) Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): bringing up device. Nov 5 11:20:24 somesystem kernel: [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:24 somesystem kernel: [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 Nov 5 11:20:24 somesystem kernel: [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- Nov 5 11:20:24 somesystem NetworkManager: <WARN> nm_device_hw_bring_up(): (wlan0): device not up after timeout! Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): deactivating device (reason: 2). Nov 5 11:20:24 somesystem kernel: [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:29 somesystem wpa_supplicant[978]: Could not set interface 'wlan0' UP Nov 5 11:20:29 somesystem wpa_supplicant[978]: Failed to initialize driver interface Nov 5 11:20:29 somesystem NetworkManager: <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. Gnome tells me in the network menu that the device was "not ready". It appears in iwconfig but not in ifconfig. The same symptoms appear when I boot from the live CD. How can I solve this dilemma?

    Read the article

  • TCP video streaming: TCP throughput(rate) and RTT

    - by misteryes
    we know that a rough estimation of TCP rate is: WINDOW/RTT, where WINDOW is the min(CWIN, RWIN), CWIN is the congestion window size of the sender, while RWIN is the receiving window. nowadays, the encoding rate of videos may be 1000KB/s(8000kbit/s), if RTT is 500ms, it needs the window size to be 2000KB. But we know that usually the receiving window size is below 64KB, there is a big gap. so if RTT is too large, TCP streaming is not possible? Is my understanding right? thanks!

    Read the article

  • Remote kill, upload, execute file

    - by Masoud M.
    I'm developing a program and I need to upload my xyz.exe file to many host machines and execute them frequently. I need a server-client tool to do it as below steps after an update signal from my PC: Those host machine should kill any running processes with name xyz.exe. Download my new xyz.exe. Then execute new xyz.exe. I know about some tools like PsExec, but I need a tools with better user-interface and more powerful. Is there any tool to do it ? UPDATE: The systems are in a same LAN, OS is windows (XP or 7), No full remote access is needed. I'm a developer and my program should run in remote hosts and I'm testing my application.

    Read the article

  • Configuring network route between two routers on home network

    - by Paul
    I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

    Read the article

  • My DNS works! But, what is the simplest way to add something to it?

    - by Alex
    This is my current DNS example.com.db zone file. I followed a tutorial. It works, because when I point to this DNS from another server via resolve.conf, it will actually forward me to the right IP when I do "ping example.com". ; ; BIND data file for example.com ; $TTL 604800 @ IN SOA example.com. info.example.com. ( 2007011501 ; Serial 7200 ; Refresh 120 ; Retry 2419200 ; Expire 604800) ; Default TTL ; @ IN NS ns1.example.com. @ IN NS ns2.example.com. example.com. IN MX 10 mail.example.com. example.com. IN A 192.168.254.1 www IN CNAME example.com. mail IN A 192.168.254.1 ftp IN CNAME example.com. example.com. IN TXT "v=spf1 ip4:192.168.254.1 a mx ~all" mail IN TXT "v=spf1 a -all" Right now, ping example.com....goes to 192.168.254.1. That's great!!! it works! My question is--how can I add something do this file so that when my other servers: ping dbserver1....goes to 44.245.66.222 ping cacheserver1 ....goes to 38.221.44.555 I want to use it like a universal hosts file for my machines.

    Read the article

  • "Play on another device" function not working with Samsung Allshare

    - by Tural Teyyuboglu
    Briefly I can't get work "Play on another device" function More detailed My Samsung TV (which support network) and PC are in the same network. The problem is, I can play PC contents from TV. But when I try to control TV remotely from Allshare software (PC), it shows TV only as connected device: But not as remote player in "players" list The result Tried to turn off firewall completely, reset router, re-install software. No success. Please help. BTW. On this link they kinda explained how to do it, but I software doesn' detect the TV as player in my case: http://www.samsung.com/global/allshare/pcsw/quickguide.html

    Read the article

  • How do I keep a bridge enabled on a bonded interface?

    - by jlawer
    I'm working on setting up a pair of CentOS 6.3 servers that will run a couple of KVM vms and have come across a problem setting up a bridge on a bond. I am using Mode 4 (802.3ad) bonding on a pair of stacked Dell Powerconnect 5524 switches connecting to R320 servers. There are 2 links (1 to each switch) that form a Link Aggregation Group (802.3ad / LACP bonding). On top of the bond I have VLAN Tagging. I've verified this is a problem on multiple other bonding modes so it isn't just a mode 4 issue. I am testing what happens when 1 link is dropped (ie switch dies, cable breaks, etc). If I don't have a bridge (for KVM), everything works fine, failover happens as expected. If I have the bridge enabled, it works fine until failover (unplugging a cable). When failover happens /var/log/messages shows the slave link going down, followed within a second by: kernel: br1: port 1(bond0.8) entering disabled state The thing is /proc/net/bonding/bond0 shows the link is up as expected (simply with only 1 slave instead of 2). If I plug the cable back in it recovers and brings the bridge back to an enabled state. I actually have tested this while a ping is occuring and if the timing is right a packet will actually leave the system after the link is lost, but before the disabled message occurs. This disabled state I assumed was STP, but I have disabled STP on the bridge configuration and this issue still occurs. brctl showstp br1 still shows the link as disabled when it is running without a slave. I also switched between the nics in the server (I have 2x Broadcom & 4x intel). It doesn't matter which configuration I have. Does anyone know of a way to force the bridge to stay enabled or why its detecting the bond as disabled, when it isn't?

    Read the article

  • Under FreeBSD, can a VLAN interface have a smaller MTU than the primary interface?

    - by larsks
    I have a system with two physical interfaces, combined into a LACP aggregation group. That LACP channel has two VLANs, one untagged (the "native vlan") and one using VLAN tagging. This gives us: lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether 00:25:90:1d:fe:8e inet 10.243.24.23 netmask 0xffffff00 broadcast 10.243.24.255 media: Ethernet autoselect status: active laggproto lacp laggport: em1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> laggport: em0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3<RXCSUM,TXCSUM> ether 00:25:90:1d:fe:8e inet 10.243.16.23 netmask 0xffffff80 broadcast 10.243.16.127 media: Ethernet autoselect status: active vlan: 610 parent interface: lagg0 Is it possible to set a 9K MTU on lagg0 while preserving the 1500 byte MTU on vlan0? Normally I would simply try this out, but this is actually on a vendor-supported platform and I am loathe to make changes "behind the back" of their administration interface. This system is roughly FreeBSD 7.3.

    Read the article

  • Google account gives ERR_SSL_BAD_RECORD_MAC_ALERT errors

    - by Kjensen
    A couple of days ago, I started being unable to connect to accounts.google.com, which handles logins to all kinds of google services. I get this error in Chrome: Error 126 (net::ERR_SSL_BAD_RECORD_MAC_ALERT): Unknown error. In IE I get this: I assume it is the same error, just wrapped up. I run Win8 RTM. On the SAME machine, using the same network card, in a VMWare workstation image running Win7, I am able to connect perfectly. On another of my machines on my network, I am also still able to connect with no problem. My girlfriend uses the same network and has also complained a couple of times about this error (google calendar) - but this is anecdotal, since her technical troubleshooting abilities stop at "xxxx is broken". Her machine runs Win7. ;) I have rebooted, cleared cookies, do not run any antivirus/firewall, have not changed network config. The first 3-4 days after installing Win8, I did not have any problems. I have also searched, and found a hint about enabling SSL2.0 in connection settings, which did not help. Anybody know something about this error and what I can do to fix it?

    Read the article

  • "DNS not responding" error with D-Link router and PPTP internet connection

    - by Born2win
    I have a D-Link DIR-615 router since around six months. My internet connection is VPN (PPTP) based, i.e. I have been given a username and password from my ISP and my IP address is dynamic. Since a few days I am experiencing a serious problem. My router connects normally (I can see the yellow light), but my computer is giving me a "DNS not responding" error. I have tried everything (reset, reboot etc.) but no success.

    Read the article

  • What is the advantage of iSCSI over SMB?

    - by sofakng
    At my house I'm running a Hyper-V server with a Windows Server 2008 R2 VM acting as a file server. Files are shared across my network using SMB. (Also, the machine is using a PERC 6/i RAID card but I don't think that's important) I'm thinking about setting up a dedicated SAN (iSCSI) machine and then switching my Hyper-V server to ESXi. What are the advantages of using iSCSI versus SMB? I think I would still need a file server OS (eg. Win 2k8) sharing files via SMB so I'm not sure the end result would be any different than my current setup...

    Read the article

  • Redirection of outbound UDP port NTP.

    - by pboin
    For my residential service, I changed ISPs to Zoom/Armstrong. Just after that, my NTP daemons stopped working. I dug deep and diagnosed the problem: Unprivileged ports are getting out. When i run 'ntpdate' for example, I go out on a high, unprivleged port, and get a response on UDP 123. That's fine. The 'ntpd' daemon though, expects to go out on 123 and get its reply there as well. This must be a common problem, because it's directly addressed in the NTP troubleshooting guide. Just to see what would happen, I wrote a detailed email to the general support address at Armstrong. They replied almost immediately with a complete technical answer! They have everything <1024 blocked, except for a few ports to support outbound VPN. So, the question: Can I use IPtables to essentially re-write my outbound UDP 123 up to 2123 or something like that? If I do, does there need to be a corresponding 2123-123 rule to translate the reply? This seems like NAT, but with ports, not addresses. True, I could run ntpdate from cron, but that loses all of the adjustment smarts of NTP.

    Read the article

  • What would cause Memcached to Hang for 2+ seconds?

    - by Brad Dwyer
    I'm going nuts trying to scale memcached. From their site: Memcached operations are almost all O(1). Connecting to it and issuing a get or stat command should never lag. If connecting lags, you may be hitting the max connections limit. See ServerMaint for details on stats to monitor. If issuing commands lags, you can have a number of tuning problems. Most common are hardware problems, not enough RAM (swapping), network problems (bandwidth, dropped packets, half-duplex connections). On rare occasion OS bugs or memcached bugs can contribute. Well.. it is most certainly not performing like an O(1) operation for me. Under low to normal load on our site memcached response times for get and set ops are about 0.001 seconds. Not bad. But if we triple the load we get outliers that take 100x (or in rare cases 1000x!) that long. I even had one instance where it took 2.2442 seconds for memcached to store a value. Obviously this is killing our site. Here's the output of Memcached-getStats during one of the slow periods: [pid] => 18079 [uptime] => 8903 [threads] => 4 [time] => 1332795759 [pointer_size] => 32 [rusage_user_seconds] => 26 [rusage_user_microseconds] => 503872 [rusage_system_seconds] => 125 [rusage_system_microseconds] => 477008 [curr_items] => 42099 [total_items] => 422500 [limit_maxbytes] => 943718400 [curr_connections] => 84 [total_connections] => 4946 [connection_structures] => 178 [bytes] => 7259957 [cmd_get] => 1679091 [cmd_set] => 351809 [get_hits] => 1662048 [get_misses] => 17043 [evictions] => 0 [bytes_read] => 109388476 [bytes_written] => 3187646458 [version] => 1.4.13 So things that I have ruled out so far are: Hitting the max connections limit (curr_connections of 84 is well below the default of max of 1024) Swapping - the machine has 900M out of 1024M of memory dedicated to memcached on a dedicated machine. It only appears to be using about 7MB of data as per the bytes stat. How would I diagnose the other hardware problems? prstat doesn't really show a whole lot going on in terms of CPU or memory usage. Not sure how to figure out the network problems but as this is a dedicated server on the same private network as the web box I don't think it's a connectivity issue (ping is less than a millisecond between the boxes). Is there something else I'm missing here? It's driving me nuts. Edit: Also forgot to mention that I've tried both persistent and non-persistent connections with minimal-to-no impact.

    Read the article

  • Assign fixed IP address via DHCP by DNS lookup

    - by Janoszen
    Preface I'm building a virtualization environment with Ubuntu 14.04 and LXC. I don't want to write my own template since the upgrade from 12.04 to 14.04 has shown that backwards compatibility is not guaranteed. Therefore I'm deploying my virtual machines via lxc-create, using the default Ubuntu template. The DNS for the servers is provided by Amazon Route 53, so no local DNS server is needed. I also use Puppet to configure my servers, so I want to keep the manual effort on the deployment minimal. Now, the default Ubuntu template assigns IP addresses via DHCP. Therefore, I need a local DHCP server to assign IP addresses to the nodes, so I can SSH into them and get Puppet running. Since Puppet requires a proper DNS setup, assigning temporary IP addresses is not an option, the client needs to get the right hostname and IP address from the start. Question What DHCP server do I use and how do I get it to assign the IP address based only on the host-name DHCP option by performing a DNS lookup on that very host name? What I've tried I tried to make it work using the ISC DHCP server, however, the manual clearly states: Please be aware that only the dhcp-client-identifier option and the hardware address can be used to match a host declaration, or the host-identifier option parameter for DHCPv6 servers. For example, it is not possible to match a host declaration to a host-name option. This is because the host-name option cannot be guaranteed to be unique for any given client, whereas both the hardware address and dhcp-client-identifier option are at least theoretically guaranteed to be unique to a given client. I also tried to create a class that matches the hostname like this: class "my-client-name" { match if option host-name = "my-client-name"; fixed-address my-client-name.my-domain.com; } Unfortunately the fixed-address option is not allowed in class statements. I can replace it with a 1-size pool, which works as expected: subnet 10.103.0.0 netmask 255.255.0.0 { option routers 10.103.1.1; class "my-client-name" { match if option host-name = "my-client-name"; } pool { allow members of "my-client-name"; range 10.103.1.2 10.103.1.2; } } However, this would require me to administer the IP addresses in two places (Amazon Route53 and the DHCP server), which I would prefer not to do. About security Since this is only used in the bootstrapping phase on an internal network and is then replaced by a static network configuration by Puppet, this shouldn't be an issue from a security standpoint. I am, however, aware that the virtual machine bootstraps with "ubuntu:ubuntu" credentials, which I intend to fix once this is running.

    Read the article

  • Finding a private (NAT) host's IP using historic destination data

    - by l0c0b0x
    The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

    Read the article

  • How to place a virtual machine in DMZ?

    - by Giordano
    I have an Ubuntu 12.04 server running few virtual machines with KVM. I would like to expose some of these virtual machines on the internet, to make it possible for customers to test the products we're developing and make available other products for demo purposes. One of the server NICs is configured with a public IP. However before exposing anything on the web I would like to be sure that if one of the virtual machines get compromised, the attacker doesn't reach the rest of the hosts. What I would like to do is to put these virtual machines into a DMZ. These are the steps I'm planning to do: Create a tap interface in the virtualization host (let's say tap1) Create a bridge using tap1 and give it an IP in a subnet separate from the other hosts. Let's say 10.0.0.1 Attach the DMZ virtual machines to the bridge and configure their IP statically (10.0.0.2, 10.0.0.3, etc...) Using UFW, forbid any traffic from 10.0.0.0/24 to any of the internal hosts, allow the traffic from the internal hosts towards 10.0.0.0/24 and expose the virtual machines on the web using port forwarding. Do you think this setup is safe? Can you suggest any improvement or a better/safer approach? Thanks in advance!

    Read the article

  • Get the wireless adapter frequency-band mode in Windows 7

    - by Petr
    I have a dual-band 802.11n router operating in both frequency bands with the same SSID. My Windows 7 laptop has a dual-band wireless adapter. Is there a way to find out which frequency band is the one currently used by the client? Also, is there a way to set the preffered band? Thanks. EDIT1: The router is Linksys E4200 (V2) and I essentially want to keep the 2.4GHz band in the mixed-mode so that the legacy 802.11g devices can connect while allocating the 5.0GHz band for 802.11n devices. The laptop's adapter (Intel Centrino Ultimate-N 6300 ANG) can operate in both 802.11n modes. EDIT2: Related topic

    Read the article

  • What are some good, IP Address Management solutions for IPv6? [closed]

    - by Russell Heilling
    There are a number of open source IPAM tools available for IPv4 address management; however there seems to be a distinct lack of actively updated tools available for IPv6. Other than FreeIPdb (code no longer maintained) or the RIPE Database (I have seen some customisations to the RIPEdb that allow for enterprise/ISP IPAM but it seems like overkill for a system that will probably only ever handle one /32 worth of space). Are there any other options that I'm missing? (Database only please. I know vi can be used for flat text IPAM, that's how I'm handling our /32 at the moment, but I don't see it scaling for much longer) It doesn't have to be open source but what are folks doing to manage IPv6 in a dual stack environment

    Read the article

  • Slow LAN transfer from 3rd party computer

    - by Chris
    Hi Everyone, I've got an odd problem that I'm not really sure where to start the troubleshooting process. I have a 'server' with Windows Server 2008R2 (64-bit) installed and it has a couple of hard drives. If I Remote Desktop into the server and transfer files from one HD to the other, all it fine. If however, I use my workstation (Windows 7 64bit) and open up a shared resource on the server and transfer a file from one hard drive on the server to another HD on the server (not using Remote Desktop, just Windows explorer/Network places), the transfer crawls... It takes about 5mins to discover files/calculate the transfer and then starts transferring at speeds like 56KB/s - 200KB/s. Both machines have Marvel GigE network ports with a TrendNet 8-port green GigE switch. I've set Jumbo packets to 9K on both machines...

    Read the article

  • Computer name not appearing on network

    - by stib
    I can connect to other computers on my home network (ubuntu + OSX machines) using the IP address, but I can't connect using the netbios name. On the mac the name appears in Finder but if I try to connect (goconnect to server smb://[email protected]) it doesn't work, while smb://[email protected] does. Same with ssh, ping and afp between the macs. This is a intermittent problem. It has worked in the past.

    Read the article

  • Finding Missing UDP Frames Using Wireshark + Custom Dissector (for CQS)

    - by John Dibling
    How do you use Wireshark to identify missing UDP frames? I have written a custom dissector for the CQS feed (reference page). One of our servers gaps when receiving this feed. According to Wireshark, some UDP frames are never received. I know that the frames were sent because all of our other servers are gap-free. A CQS frame consists of multiple messages, each having its own sequence number. My custom dissector provides the following data to Wireshark: cqs.frame_gaps - the number of gaps within a UDP frame (always zero) cqs.frame_first_seq - the first sequence number in a UDP frame cqs.frame_expected_seq - the first sequence number expected in the next UDP frame cqs.frame_msg_count - the number of messages in this UDP frame And I am displaying each of these values in custom columns, as shown in this screenshot: A typical CQS log will consist of millions of rows, so I can't just eyeball it. Is there any way I can get Wireshark to tell me which frames are missing?

    Read the article

  • SASL - Plaintext password not accepted - Encrypted works

    - by leviathanus
    I have a very strange issue! SASL does not work properly, as it does not accept plain-text passwords (like Outlook sends them) Oct 2 10:35:09 srf cyrus/imap[4119]: accepted connection Oct 2 10:35:09 srf cyrus/imap[4119]: badlogin: [217.XX.XXX.140] plaintext [email protected] SASL(-1): generic failure: checkpass failed Now I switch to "Encrypted password" in Thunderbird. I have the same issue as Outlook above on Thunderbird if I turn on "Plain Password"): Oct 2 10:40:40 srf cyrus/imap[14644]: accepted connection Oct 2 10:40:41 srf cyrus/imap[14622]: login: [217.XX.XXX.140] [email protected] CRAM-MD5 User logged in Same with Postfix: Without Oct 2 10:42:48 srf postfix/smtpd[17980]: connect from unknown[217.XX.XXX.140] Oct 2 10:42:48 srf postfix/smtpd[17980]: warning: SASL authentication failure: cannot connect to saslauthd server: Permission denied Oct 2 10:42:48 srf postfix/smtpd[17980]: warning: SASL authentication failure: Password verification failed Oct 2 10:42:48 srf postfix/smtpd[17980]: warning: unknown[217.XX.XXX.140]: SASL PLAIN authentication failed: generic failure With "Encrypted password": Oct 2 10:45:27 srf postfix/smtpd[21872]: connect from unknown[217.XX.XXX.140] Oct 2 10:45:28 srf postfix/smtpd[21872]: 50B3A332AAB: client=unknown[217.XX.XXX.140], sasl_method=CRAM-MD5, [email protected] Oct 2 10:45:28 srf postfix/cleanup[21899]: 50B3A332AAB: message-id=<[email protected]> Oct 2 10:45:28 srf postfix/qmgr[6181]: 50B3A332AAB: from=<[email protected]>, size=398, nrcpt=1 (queue active) Oct 2 10:45:28 srf postfix/smtpd[21872]: disconnect from unknown[217.XX.XXX.140] Config: /etc/imapd.conf:sasl_mech_list:LOGIN PLAIN CRAM-MD5 and /etc/postfix/sasl/smtpd.conf:mech_list: LOGIN PLAIN CRAM-MD5 I have no idea where to dig. Please advise.

    Read the article

  • Blocked connections passing through firewall. What is wrong?

    - by Kiranu
    In our company we have a small business router (Cisco RV082) on which we are using its standard configuration (block all incoming traffic). We also have an SMTP relay configured (using WS2008R2) so that our internal applications can send email through google apps (which requires authentication). The thing is that the server was being used to send spam. We fixed the problem by only allowing the server to relay email from our internal IP address range (10.0.0.0/16). My concern is that there was a way by which external IPs connected to the network and that underlying problem has not been fixed, but I cannot imagine how these machines connected. Any thoughts?

    Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >