Search Results

Search found 5493 results on 220 pages for 'boost regex'.

Page 214/220 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

  • Windows 7: How to place SuperFetch cache on an SSD?

    - by Ian Boyd
    I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

    Read the article

  • Guide to MySQL & NoSQL, Webinar Q&A

    - by Mat Keep
    0 0 1 959 5469 Homework 45 12 6416 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Yesterday we ran a webinar discussing the demands of next generation web services and how blending the best of relational and NoSQL technologies enables developers and architects to deliver the agility, performance and availability needed to be successful. Attendees posted a number of great questions to the MySQL developers, serving to provide additional insights into areas like auto-sharding and cross-shard JOINs, replication, performance, client libraries, etc. So I thought it would be useful to post those below, for the benefit of those unable to attend the webinar. Before getting to the Q&A, there are a couple of other resources that maybe useful to those looking at NoSQL capabilities within MySQL: - On-Demand webinar (coming soon!) - Slides used during the webinar - Guide to MySQL and NoSQL whitepaper  - MySQL Cluster demo, including NoSQL interfaces, auto-sharing, high availability, etc.  So here is the Q&A from the event  Q. Where does MySQL Cluster fit in to the CAP theorem? A. MySQL Cluster is flexible. A single Cluster will prefer consistency over availability in the presence of network partitions. A pair of Clusters can be configured to prefer availability over consistency. A full explanation can be found on the MySQL Cluster & CAP Theorem blog post.  Q. Can you configure the number of replicas? (the slide used a replication factor of 1) Yes. A cluster is configured by an .ini file. The option NoOfReplicas sets the number of originals and replicas: 1 = no data redundancy, 2 = one copy etc. Usually there's no benefit in setting it >2. Q. Interestingly most (if not all) of the NoSQL databases recommend having 3 copies of data (the replication factor).    Yes, with configurable quorum based Reads and writes. MySQL Cluster does not need a quorum of replicas online to provide service. Systems that require a quorum need > 2 replicas to be able to tolerate a single failure. Additionally, many NoSQL systems take liberal inspiration from the original GFS paper which described a 3 replica configuration. MySQL Cluster avoids the need for a quorum by using a lightweight arbitrator. You can configure more than 2 replicas, but this is a tradeoff between incrementally improved availability, and linearly increased cost. Q. Can you have cross node group JOINS? Wouldn't that run into the risk of flooding the network? MySQL Cluster 7.2 supports cross nodegroup joins. A full cross-join can require a large amount of data transfer, which may bottleneck on network bandwidth. However, for more selective joins, typically seen with OLTP and light analytic applications, cross node-group joins give a great performance boost and network bandwidth saving over having the MySQL Server perform the join. Q. Are the details of the benchmark available anywhere? According to my calculations it results in approx. 350k ops/sec per processor which is the largest number I've seen lately The details are linked from Mikael Ronstrom's blog The benchmark uses a benchmarking tool we call flexAsynch which runs parallel asynchronous transactions. It involved 100 byte reads, of 25 columns each. Regarding the per-processor ops/s, MySQL Cluster is particularly efficient in terms of throughput/node. It uses lock-free minimal copy message passing internally, and maximizes ID cache reuse. Note also that these are in-memory tables, there is no need to read anything from disk. Q. Is access control (like table) planned to be supported for NoSQL access mode? Currently we have not seen much need for full SQL-like access control (which has always been overkill for web apps and telco apps). So we have no plans, though especially with memcached it is certainly possible to turn-on connection-level access control. But specifically table level controls are not planned. Q. How is the performance of memcached APi with MySQL against memcached+MySQL or any other Object Cache like Ecache with MySQL DB? With the memcache API we generally see a memcached response in less than 1 ms. and a small cluster with one memcached server can handle tens of thousands of operations per second. Q. Can .NET can access MemcachedAPI? Yes, just use a .Net memcache client such as the enyim or BeIT memcache libraries. Q. Is the row level locking applicable when you update a column through memcached API? An update that comes through memcached uses a row lock and then releases it immediately. Memcached operations like "INCREMENT" are actually pushed down to the data nodes. In most cases the locks are not even held long enough for a network round trip. Q. Has anyone published an example using something like PHP? I am assuming that you just use the PHP memcached extension to hook into the memcached API. Is that correct? Not that I'm aware of but absolutely you can use it with php or any of the other drivers Q. For beginner we need more examples. Take a look here for a fully worked example Q. Can I access MySQL using Cobol (Open Cobol) or C and if so where can I find the coding libraries etc? A. There is a cobol implementation that works well with MySQL, but I do not think it is Open Cobol. Also there is a MySQL C client library that is a standard part of every mysql distribution Q. Is there a place to go to find help when testing and/implementing the NoSQL access? If using Cluster then you can use the [email protected] alias or post on the MySQL Cluster forum Q. Are there any white papers on this?  Yes - there is more detail in the MySQL Guide to NoSQL whitepaper If you have further questions, please don’t hesitate to use the comments below!

    Read the article

  • JDK bug migration: components and subcomponents

    - by darcy
    One subtask of the JDK migration from the legacy bug tracking system to JIRA was reclassifying bugs from a three-level taxonomy in the legacy system, (product, category, subcategory), to a fundamentally two-level scheme in our customized JIRA instance, (component, subcomponent). In the JDK JIRA system, there is technically a third project-level classification, but by design a large majority of JDK-related bugs were migrated into a single "JDK" project. In the end, over 450 legacy subcategories were simplified into about 120 subcomponents in JIRA. The 120 subcomponents are distributed among 17 components. A rule of thumb used was that a subcategory had to have at least 50 bugs in it for it to be retained. Below is a listing the component / subcomponent classification of the JDK JIRA project along with some notes and guidance on which OpenJDK email addresses cover different areas. Eventually, a separate incidents project to host new issues filed at bugs.sun.com will use a slightly simplified version of this scheme. The preponderance of bugs and subcomponents for the JDK are in library-related areas, with components named foo-libs and subcomponents primarily named after packages. While there was an overall condensation of subcomponents in the migration, in some cases long-standing informal divisions in core libraries based on naming conventions in the description were promoted to formal subcomponents. For example, hundreds of bugs in the java.util subcomponent whose descriptions started with "(coll)" were moved into java.util:collections. Likewise, java.lang bugs starting with "(reflect)" and "(proxy)" were moved into java.lang:reflect. client-libs (Predominantly discussed on 2d-dev and awt-dev and swing-dev.) 2d demo java.awt java.awt:i18n java.beans (See beans-dev.) javax.accessibility javax.imageio javax.sound (See sound-dev.) javax.swing core-libs (See core-libs-dev.) java.io java.io:serialization java.lang java.lang.invoke java.lang:class_loading java.lang:reflect java.math java.net java.nio (Discussed on nio-dev.) java.nio.charsets java.rmi java.sql java.sql:bridge java.text java.util java.util.concurrent java.util.jar java.util.logging java.util.regex java.util:collections java.util:i18n javax.annotation.processing javax.lang.model javax.naming (JNDI) javax.script javax.script:javascript javax.sql org.openjdk.jigsaw (See jigsaw-dev.) security-libs (See security-dev.) java.security javax.crypto (JCE: includes SunJCE/MSCAPI/UCRYPTO/ECC) javax.crypto:pkcs11 (JCE: PKCS11 only) javax.net.ssl (JSSE, includes javax.security.cert) javax.security javax.smartcardio javax.xml.crypto org.ietf.jgss org.ietf.jgss:krb5 other-libs corba corba:idl corba:orb corba:rmi-iiop javadb other (When no other subcomponent is more appropriate; use judiciously.) Most of the subcomponents in the xml component are related to jaxp. xml jax-ws jaxb javax.xml.parsers (JAXP) javax.xml.stream (JAXP) javax.xml.transform (JAXP) javax.xml.validation (JAXP) javax.xml.xpath (JAXP) jaxp (JAXP) org.w3c.dom (JAXP) org.xml.sax (JAXP) For OpenJDK, most JVM-related bugs are connected to the HotSpot Java virtual machine. hotspot (See hotspot-dev.) build compiler (See hotspot-compiler-dev.) gc (garbage collection, see hotspot-gc-dev.) jfr (Java Flight Recorder) jni (Java Native Interface) jvmti (JVM Tool Interface) mvm (Multi-Tasking Virtual Machine) runtime (See hotspot-runtime-dev.) svc (Servicability) test core-svc (See serviceability-dev.) debugger java.lang.instrument java.lang.management javax.management tools The full JDK bug database contains entries related to legacy virtual machines that predate HotSpot as well as retired APIs. vm-legacy jit (Sun Exact VM) jit_symantec (Symantec VM, before Exact VM) jvmdi (JVM Debug Interface ) jvmpi (JVM Profiler Interface ) runtime (Exact VM Runtime) Notable command line tools in the $JDK/bin directory have corresponding subcomponents. tools appletviewer apt (See compiler-dev.) hprof jar javac (See compiler-dev.) javadoc(tool) (See compiler-dev.) javah (See compiler-dev.) javap (See compiler-dev.) jconsole launcher updaters (Timezone updaters, etc.) visualvm Some aspects of JDK infrastructure directly affect JDK Hg repositories, but other do not. infrastructure build (See build-dev and build-infra-dev.) licensing (Covers updates to the third party readme, licenses, and similar files.) release_eng (Release engineering) staging (Staging of web pages related to JDK releases.) The specification subcomponent encompasses the formal language and virtual machine specifications. specification language (The Java Language Specification) vm (The Java Virtual Machine Specification) The code for the deploy and install areas is not currently included in OpenJDK. deploy deployment_toolkit plugin webstart install auto_update install servicetags In the JDK, there are a number of cross-cutting concerns whose organization is essentially orthogonal to other areas. Since these areas generally have dedicated teams working on them, it is easier to find bugs of interest if these bugs are grouped first by their cross-cutting component rather than by the affected technology. docs doclet guides hotspot release_notes tools tutorial embedded build hotspot libraries globalization locale-data translation performance hotspot libraries The list of subcomponents will no doubt grow over time, but my inclination is to resist that growth since the addition of each subcomponent makes the system as a whole more complicated and harder to use. When the system gets closer to being externalized, I plan to post more blog entries describing recommended use of various custom fields in the JDK project.

    Read the article

  • What's new in Solaris 11.1?

    - by Karoly Vegh
    Solaris 11.1 is released. This is the first release update since Solaris 11 11/11, the versioning has been changed from MM/YY style to 11.1 highlighting that this is Solaris 11 Update 1.  Solaris 11 itself has been great. What's new in Solaris 11.1? Allow me to pick some new features from the What's New PDF that can be found in the official Oracle Solaris 11.1 Documentation. The updates are very numerous, I really can't include all.  I. New AI Automated Installer RBAC profiles have been introduced to enable delegation of installation tasks. II. The interactive installer now supports installing the OS to iSCSI targets. III. ASR (Auto Service Request) and OCM (Oracle Configuration Manager) have been enabled by default to proactively provide support information and create service requests to speed up support processes. This is optional and can be disabled but helps a lot in supportcases. For further information, see: http://oracle.com/goto/solarisautoreg IV. The new command svcbundle helps you to create SMF manifests without having to struggle with XML editing. (btw, do you know the interactive editprop subcommand in svccfg? The listprop/setprop subcommands are great for scripting and automating, but for an interactive property editing session try, for example, this: svccfg -s svc:/application/pkg/system-repository:default editprop )  V. pfedit: Ever wondered how to delegate editing permissions to certain files? It is well known "sudo /usr/bin/vi /etc/hosts" is not the right way, for sudo elevates the complete vi process to admin levels, and the user can "break" out of the session as root with simply starting a shell from that vi. Now, the new pfedit command provides a solution exactly to this challenge - an auditable, secure, per-user configurable editing possibility. See the pfedit man page for examples.   VI. rsyslog, the popular logging daemon (filters, SSL, formattable output, SQL collect...) has been included in Solaris 11.1 as an alternative to syslog.  VII: Zones: Solaris Zones - as a major Solaris differentiator - got lots of love in terms of new features: ZOSS - Zones on Shared Storage: Placing your zones to shared storage (FC, iSCSI) has never been this easy - via zonecfg.  parallell updates - with S11's bootenvironments updating zones was no problem and meant no downtime anyway, but still, now you can update them parallelly, a way faster update action if you are running a large number of zones. This is like parallell patching in Solaris 10, but with all the IPS/ZFS/S11 goodness.  per-zone fstype statistics: Running zones on a shared filesystems complicate the I/O debugging, since ZFS collects all the random writes and delivers them sequentially to boost performance. Now, over kstat you can find out which zone's I/O has an impact on the other ones, see the examples in the documentation: http://docs.oracle.com/cd/E26502_01/html/E29024/gmheh.html#scrolltoc Zones got RDSv3 protocol support for InfiniBand, and IPoIB support with Crossbow's anet (automatic vnic creation) feature.  NUMA I/O support for Zones: customers can now determine the NUMA I/O topology of the system from within zones.  VIII: Security got a lot of attention too:  Automated security/audit reporting, with builtin reporting templates e.g. for PCI (payment card industry) audits.  PAM is now configureable on a per-user basis instead of system wide, allowing different authentication requirements for different users  SSH in Solaris 11.1 now supports running in FIPS 140-2 mode, that is, in a U.S. government security accredited fashion.  SHA512/224 and SHA512/256 cryptographic hash functions are implemented in a FIPS-compliant way - and on a T4 implemented in silicon! That is, goverment-approved cryptography at HW-speed.  Generally, Solaris is currently under evaluation to be both FIPS and Common Criteria certified.  IX. Networking, as one of the core strengths of Solaris 11, has been extended with:  Data Center Bridging (DCB) - not only setups where network and storage share the same fabric (FCoE, anyone?) can have Quality-of-Service requirements. DCB enables peers to distinguish traffic based on priorities. Your NICs have to support DCB, see the documentation, and additional information on Wikipedia. DataLink MultiPathing, DLMP, enables link aggregation to span across multiple switches, even between those of different vendors. But there are essential differences to the good old bandwidth-aggregating LACP, see the documentation: http://docs.oracle.com/cd/E26502_01/html/E28993/gmdlu.html#scrolltoc VNIC live migration is now supported from one physical NIC to another on-the-fly  X. Data management:  FedFS, (Federated FileSystem) is new, it relies on Solaris 11's NFS referring mechanism to join separate shares of different NFS servers into a single filesystem namespace. The referring system has been there since S11 11/11, in Solaris 11.1 FedFS uses a LDAP - as the one global nameservice to bind them all.  The iSCSI initiator now uses the T4 CPU's HW-implemented CRC32 algorithm - thus improving iSCSI throughput while reducing CPU utilization on a T4 Storage locking improvements are now RAC aware, speeding up throughput with better locking-communication between nodes up to 20%!  XI: Kernel performance optimizations: The new Virtual Memory subsystem ("VM2") scales now to 100+ TB Memory ranges.  The memory predictor monitors large memory page usage, and adjust memory page sizes to applications' needs OSM, the Optimized Shared Memory allows Oracle DBs' SGA to be resized online XII: The Power Aware Dispatcher in now by default enabled, reducing power consumption of idle CPUs. Also, the LDoms' Power Management policies and the poweradm settings in Solaris 11 OS will cooperate. XIII: x86 boot: upgrade to the (Grand Unified Bootloader) GRUB2. Because grub2 differs in the configuration syntactically from grub1, one shall not edit the new grub configuration (grub.cfg) but use the new bootadm features to update it. GRUB2 adds UEFI support and also support for disks over 2TB. XIV: Improved viewing of per-CPU statistics of mpstat. This one might seem of less importance at first, but nowadays having better sorting/filtering possibilities on a periodically updated mpstat output of 256+ vCPUs can be a blessing. XV: Support for Solaris Cluster 4.1: The What's New document doesn't actually mention this one, since OSC 4.1 has not been released at the time 11.1 was. But since then it is available, and it requires Solaris 11.1. And it's only a "pkg update" away. ...aand I seriously need to stop here. There's a lot I missed, Edge Virtual Bridging, lofi tuning, ZFS sharing and crypto enhancements, USB3.0, pulseaudio, trusted extensions updates, etc - but if I mention all those then I effectively copy the What's New document. Which I recommend reading now anyway, it is a great extract of the 300+ new projects and RFE-followups in S11.1. And this blogpost is a summary of that extract.  For closing words, allow me to come back to Request For Enhancements, RFEs. Any customer can request features. Open up a Support Request, explain that this is an RFE, describe the feature you/your company desires to have in S11 implemented. The more SRs are collected for an RFE, the more chance it's got to get implemented. Feel free to provide feedback about the product, as well as about the Solaris 11.1 Documentation using the "Feedback" button there. Both the Solaris engineers and the documentation writers are eager to hear your input.Feel free to comment about this post too. Except that it's too long ;)  wbr,charlie

    Read the article

  • How to place SuperFetch cache on an SSD?

    - by Ian Boyd
    I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

    Read the article

  • Microphone not capturing sound on 12.04 Lenovo G580

    - by Yam Marcovic
    In both Skype and the Sound Recorder application, I am not capturing any audio from my built-in microphone. I'm not sure why. Otherwise, sound output is working well. I have tried running gstreamer-properties and setting the Default Input plugin to PulseAUdio as well (to match the output), and it didn't help. I have tried running alsamixer -V all and I only get 2 input-related entries: Capture(L R) which is on 100 and not muted (can't be either), and Analog Mic Boost which is on 20db. Extra info: Camera (video) is working well on Skype and Kamerka. Can you please help me get my microphone to work? lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at e0600000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at e0614000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0619000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at e0610000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: e0500000-e05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e0400000-e04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e0618000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at 3088 [size=8] Region 1: I/O ports at 3094 [size=4] Region 2: I/O ports at 3080 [size=8] Region 3: I/O ports at 3090 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at e0617000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 10 Region 0: Memory at e0615000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3040 [size=32] Kernel modules: i2c-i801 01:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 08) Subsystem: Lenovo Device 3979 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 2000 [size=128] Capabilities: <access denied> 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Lenovo Device 31a1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Silverlight 4 Twitter Client &ndash; Part 7

    - by Max
    Download this article as a PDF Welcome back :) This week we are going to look at something more exciting and a much required feature for any twitter client – auto refresh so as to show new status updates. We are going to achieve this using Silverlight 4 Timers and a bit and refresh our datagrid every 2 minutes to show new updates. We will do this so that we do only minimal request to the twitter api, so that twitter does not block us – there is a limit of 150 request an hour. Let us get started now. Also we will get the profile user id hyperlinked, so that when ever the user click on it, we will take them to their twitter page. Also it was a pain to always run this application by pressing F5, then it would open in a browser you would have to right click uninstall and install it again to see any changes. All this and yet we were not able to debug it :( Now there is a solution for this to run a silverlight application directly out of browser and yet have the debug feature. Super cool, here is how. Right on the Silverlight project and go to debug and then select the Out-Of-Browser application option and choose the *.Web project. Then just right click on the SL project and set as Startup Project. There you go, now every time you press F5, it will automatically run out of browser and still have the debug options. I go to know about this after some binging. Now let us jump to the core straight away. 1) To get the user id hyperlinked, we need to have a DataGridTemplateColumn and within that have a HyperLinkButton. The code for this will  be <data:DataGridTemplateColumn> <data:DataGridTemplateColumn.CellTemplate> <DataTemplate> <HyperlinkButton Click="HyperlinkButton_Click" Content="{Binding UserName}" TargetName="_blank" ></HyperlinkButton> </DataTemplate> </data:DataGridTemplateColumn.CellTemplate> </data:DataGridTemplateColumn> 2) Now let us look at how we are getting this done by looking into HyperlinkButton_Click event handler. There we will dynamically set the NavigateUri to the twitter page. I tried to do this using some binding, eval like stuff as in ASP.NET, but no luck! private void HyperlinkButton_Click(object sender, RoutedEventArgs e) { HyperlinkButton hb = (HyperlinkButton)e.OriginalSource; hb.NavigateUri = new Uri("http://twitter.com/" + hb.Content.ToString(), UriKind.Absolute); } 3) Now we need to switch on our Timer right in the OnNavigated to event on our SL page. So we need to modify our OnNavigated event to some thing like below: protected override void OnNavigatedTo(NavigationEventArgs e) { image1.Source = new BitmapImage(new Uri(GlobalVariable.profileImage, UriKind.Absolute)); this.Title = GlobalVariable.getUserName() + " - Home"; if (!GlobalVariable.isLoggedin()) this.NavigationService.Navigate(new Uri("/Login", UriKind.Relative)); else { currentGrid = "Timeline-Grid"; TwitterCredentialsSubmit(); myDispatcherTimer.Interval = new TimeSpan(0, 0, 0, 60, 0); myDispatcherTimer.Tick += new EventHandler(Each_Tick); myDispatcherTimer.Start(); } } I use a global string – here it is currentGrid variable to indicate what is bound in the datagrid so that after every timer tick, I can rebind the latest data to it again. Like I will only rebind the friends timeline again if the data grid currently holds it and I’ll only rebind the respective list status again in the data grid, if already a list status is bound to the data grid. In the above timer code, its set to trigger the Each_Tick event handler every 1 minute (60 seconds). TimeSpan takes in (days, hours, minutes, seconds, milliseconds). 4) Now we need to set the list name in the currentGrid variable when a list button is clicked. So add the code line below to the list button event handler currentGrid = currentList = b.Content.ToString(); 5) Now let us see how Each_Tick event handler is implemented. public void Each_Tick(object o, EventArgs sender) { if (!currentGrid.Equals("Timeline-Grid")) getListStatuses(currentGrid); else { WebRequest.RegisterPrefix("https://", System.Net.Browser.WebRequestCreator.ClientHttp); WebClient myService = new WebClient(); myService.AllowReadStreamBuffering = true; myService.UseDefaultCredentials = false; myService.Credentials = new NetworkCredential(GlobalVariable.getUserName(), GlobalVariable.getPassword()); myService.DownloadStringCompleted += new DownloadStringCompletedEventHandler(TimelineRequestCompleted); myService.DownloadStringAsync(new Uri("https://twitter.com/statuses/friends_timeline.xml")); } } If the data grid hold friends timeline, I just use the same bit of code we had already to bind the friends timeline to the data grid. Copy Paste. But if it is some list timeline that is bound in the datagrid, I then call the getListStatus method with the currentGrid string which will actually be holding the list name. 6) I wanted to make the hyperlinks inside the status message as hyperlinks and when the user clicks on it, we can then open that link. I tried using a convertor and using a regex to recognize a url and wrap it up with a href, but that is not gonna work in silverlight textblock :( Anyways that convertor code is in the zip file. 7) You can get the complete project files from here. 8) Please comment below for your doubts, suggestions, improvements. I will try to reply as early as possible. Thanks for all your support. Technorati Tags: Silverlight 4,Datagrid,Twitter API,Silverlight Timer

    Read the article

  • Following my passion

    - by Maria Sandu
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-ansi-language:RO;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-ansi-language:RO;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-ansi-language:RO;} What makes you go the extra mile? What makes you move forward and be ambitious? My name is Alin Gheorghe and I am currently working as a Contracts Administrator in the Shared Service Centre in Bucharest, Romania. I have graduated from the Political Science Faculty of the National School of Political and Administrative Studies here in Bucharest and I am currently undergoing a Master Program on Security and Diplomacy at the same university. Although I have been working a full time job here at Oracle since January 2011 and also going to school after work, I am going to tell you how I spend my spare time and about my passion. I always thought that if one doesn’t have something that he would consider a passion it’s always just a matter of time until he would discover one. Looking back, I can tell you that I discovered mine when I was 14 years old and I remember watching a football game when suddenly I became fascinated by the “man in black” that all football players obeyed during the match. That year I attended and promoted a referee course within my local referee committee and about 6 months later I was delegated to my first official game at youth tournament. Almost 10 years have passed since then and I can tell you that I very much love and appreciate this activity that I have spent doing, each and every weekend, 9 months every year, acquiring more than 600 official games until now. And even if not having a real free weekend or holiday might be sound very consuming, I can say that having something I am passionate about helps me to keep myself balanced and happy while giving me an option to channel any stress or anxiety I may feel. I think it’s important to have something of your own besides work that you spend time and effort on. Whether it’s painting, writing or a sport, having a passion can only have a positive effect on your life. And as every extra thing, it’s not always easy to follow your passion, but is it worth it? Speaking from my own experience I am sure it is, and here are some tips and tricks I constantly use not to give up on my passion: Normal 0 false false false EN-US X-NONE X-NONE -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-ansi-language:RO;} No matter how much time you spend at work and how much credit you get for that, it will always be the passion related achievements that will comfort you more and boost your self esteem and nothing compares to that feeling you get. I always try to keep this in mind so that each time I think about giving up I get even more ambitious to move forward. Everybody can just do what they are paid to do or what they are requested to do at work but not everybody can go that extra mile when it comes to following their passion and putting in extra work for that. By exercising this constantly you get used to also applying this attitude on the work related tasks. It takes accurate planning, anticipation and forecasting in order to combine your work with your passion. Therefore having a full schedule and keeping up with it will only help develop and exercise such skills and also will prove to you that you are up to such a challenge. I always keep in mind as a final goal that if you get very good at your passion you can actually start earning from it. And I think that is the ultimate level when you can say that you make a living by doing exactly what you are passionate about. In conclusion, by taking the easy way not only do you miss out on something nice, but life’s priceless rewards are usually given by those things that you actually believe in and know how to stand up for over time.

    Read the article

  • To SYNC or not to SYNC – Part 3

    - by AshishRay
    I can't believe it has been almost a year since my last blog post. I know, that's an absolute no-no in the blogosphere. And I know that "I have been busy" is not a good excuse. So - without trying to come up with an excuse - let me state this - my apologies for taking such a long time to write the next Part. Without further ado, here goes. This is Part 3 of a multi-part blog article where we are discussing various aspects of setting up Data Guard synchronous redo transport (SYNC). In Part 1 of this article, I debunked the myth that Data Guard SYNC is similar to a two-phase commit operation. In Part 2, I discussed the various ways that network latency may or may not impact a Data Guard SYNC configuration. In this article, I will talk in details regarding why Data Guard SYNC is a good thing. I will also talk about distance implications for setting up such a configuration. So, Why Good? Why is Data Guard SYNC a good thing? Because, at the end of the day, this gives you the assurance of zero data loss - it doesn’t matter what outage may befall your primary system. Befall! Boy, that sounds theatrical. But seriously - think about this - it minimizes your data risks. That’s a big deal. Whether you have an outage due to bad disks, faulty hardware components, hardware / software bugs, physical data corruptions, power failures, lightning that takes out significant part of your data center, fire that melts your assets, water leakage from the cooling system, human errors such as accidental deletion of online redo log files - it doesn’t matter - you can have that “Om - peace” look on your face and then you can failover to the standby system, without losing a single bit of data in your Oracle database. You will be a hero, as shown in this not so imaginary conversation: IT Manager: Well, what’s the status? You: John is doing the trace analysis on the storage array. IT Manager: So? How long is that gonna take? You: Well, he is stuck, waiting for a response from <insert your not-so-favorite storage vendor here>. IT Manager: So, no root cause yet? You: I told you, he is stuck. We have escalated with their Support, but you know how long these things take. IT Manager: Darn it - the site is down! You: Not really … IT Manager: What do you mean? You: John is stuck, but Sreeni has already done a failover to the Data Guard standby. IT Manager: Whoa, whoa - wait! Failover means we lost some data, why did you do this without letting the Business group know? You: We didn’t lose any data. Remember, we had set up Data Guard with SYNC? So now, any problems on the production – we just failover. No data loss, and we are up and running in minutes. The Business guys don’t need to know. IT Manager: Wow! Are we great or what!! You: I guess … Ok, so you get it - SYNC is good. But as my dear friend Larry Carpenter says, “TANSTAAFL”, or "There ain't no such thing as a free lunch". Yes, of course - investing in Data Guard SYNC means that you have to invest in a low-latency network, you have to monitor your applications and database especially in peak load conditions, and you cannot under-provision your standby systems. But all these are good and necessary things, if you are supporting mission-critical apps that are supposed to be running 24x7. The peace of mind that this investment will give you is priceless, especially if you are serious about HA. How Far Can We Go? Someone may say at this point - well, I can’t use Data Guard SYNC over my coast-to-coast deployment. Most likely - true. So how far can you go? Well, we have customers who have deployed Data Guard SYNC over 300+ miles! Does this mean that you can also deploy over similar distances? Duh - no! I am going to say something here that most IT managers don’t like to hear - “It depends!” It depends on your application design, application response time / throughput requirements, network topology, etc. However, because of the optimal way we do SYNC, customers have been able to stretch Data Guard SYNC deployments over longer distances compared to traditional, storage-centric ways of doing this. The MAA Database 10.2 best practices paper Data Guard Redo Transport & Network Configuration, and Oracle Database 11.2 High Availability Best Practices Manual talk about some of these SYNC-related metrics. For example, a test deployment of Data Guard SYNC over 330 miles with 10ms latency showed an impact less than 5% for a busy OLTP application. Even if you can’t deploy Data Guard SYNC over your WAN distance, or if you already have an ASYNC standby located 1000-s of miles away, here’s another nifty way to boost your HA. Have a local standby, configured SYNC. How local is “local”? Again - it depends. One customer runs a local SYNC standby across the campus. Another customer runs it across 15 miles in another data center. Both of these customers are running Data Guard SYNC as their HA standard. If a localized outage affects their primary system, no problem! They have all the data available on the standby, to which they can failover. Very fast. In seconds. Wait - did I say “seconds”? Yes, Virginia, there is a Santa Claus. But you have to wait till the next blog article to find out more. I assure you tho’ that this time you won’t have to wait for another year for this.

    Read the article

  • WNDR3700 Router + Cisco SG200-08 + LACP + Dual Uplink

    - by kobaltz
    Background I have a storage server that has several virtual machine images stored on them. I would store them locally, but I have limited space on my desktop (using SSD storage). I would like to increase the bandwidth between the desktop and the storage server by using two NICs on each computer. My original configuration allowed about 55MBps between the desktop and storage server. This storage server also has several TBs of documents, pictures, movies, vms, and ISO/programs. The storage server has 8 1.5TB hard drives in a RAID 10 configuration with a hardware RAID controller. The benchmarks on the RAID 10 are about 300MBps. Configuration In short, I am trying to bridge my switch and router. The switch is a small 8 port Cisco smart switch that supports 802.3ad LACP. I have two computers plugged into the switch, each with 2 Intel Gigabit NICs. The first computer is a Windows 7 machine that has the Intel ANS software installed. I have LACP configured with the computer and now show 3 NICs (2 Physical + 1 TEAM Virtual @ 2Gbps). It looks like this computer is configured correctly. I trunked the two ports that this computer is plugged into with the switch's web interface. The second computer is a homebrew storage box running debian. I also have the bonding enabled on this machine and the switch configured with LACP. Without having the WNDR3700 router in the picture yet, I am able to communicate between the Windows 7 machine and the debian box since they both have static IP addresses. With LACP enabled on both machines I am getting about 106-108MBps speeds. Issue I plug in a network cable from the switch into the router and enable DHCP on the desktop. I saw no need to have a static address on the desktop. My transfer rates are still from 106MBps-108MBps. While this is still a boost, I am trying to figure out how to get about 140-180MBps. I am thinking that I need to increase the bandwidth from the router to the switch. My switch allows 4 groups for port trunking. I plugged in a second network cable from the router to the switch. My question is, what is the proper way to fix this issue. Should I port trunk the two ports that are going from the switch to the router? Keep in mind that the router is a WNDR3700 and is unsure whether or not it supports LACP. I do have OpenWRT installed on the router, but it still wasn't clear in any documentation that I found if it supported 802.3ad LACP standards. I am also wondering if there needs to be anything changed within the Cisco settings. [Edit] - Corrected some numbers, wasn't really paying attention. It looks like the speeds though at least two NICs are bonded with LACP is still reaching the max bandwidth of one port. Is there a way to configure the switch so that I can increase this bandwidth? Also, on the storage server, I had a couple of extra NICs laying around and threw them on there as well. Another EDIT and More Findings I happened to look at the traffic of each individual NIC and think that I see the problem. I tested with a simple transfer for a 4GB file. I noticed that only one of the NICs was taking the load of the traffic. I then copied the file back to the Storage Server and noticed that the other NIC was sending out the traffic. I have 802.3ad LACP enabled on the two NICs and I see that it gets enabled dynamically on the switch's interface. Should I be using Static Link Aggregation?

    Read the article

  • System.ServiceModel.Syndication.SyndicationFeed throws when the RSS document includes a <script> blo

    - by Cheeso
    The code: using (XmlReader xmlr = XmlReader.Create(new StringReader(allXml))) { var items = from item in SyndicationFeed.Load(xmlr).Items select item; } The exception: Exception: System.Xml.XmlException: Unexpected node type Element. ReadElementString method can only be called on elements with simple or empty content. Line 11, position 25. at System.Xml.XmlReader.ReadElementString() at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadXml(XmlReader reader, SyndicationFeed result) at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadFeed(XmlReader reader) at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadFrom(XmlReader reader) at System.ServiceModel.Syndication.SyndicationFeed.Load[TSyndicationFeed](XmlReader reader) at System.ServiceModel.Syndication.SyndicationFeed.Load(XmlReader reader) at Ionic.ToolsAndTests.ReadRss.Run() in c:\dev\dotnet\ReadRss.cs:line 90 The XML content: <?xml version="1.0" encoding="utf-8"?> <?xml-stylesheet type="text/xsl" href="https://www.ibm.com/developerworks/mydeveloperworks/blogs/roller-ui/styles/rss.xsl" media="screen"?><rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:atom="http://www.w3.org/2005/Atom" > <channel> <title>Software architecture, software engineering, and Renaissance Jazz</title> <link>https://www.ibm.com/developerworks/mydeveloperworks/blogs/gradybooch</link> <atom:link rel="self" type="application/rss+xml" href="https://www.ibm.com/developerworks/mydeveloperworks/blogs/gradybooch/feed/entries/rss?lang=en" /> <description>Software architecture, software engineering, and Renaissance Jazz</description> <language>en-us</language> <copyright>Copyright <script type='text/javascript'> document.write(blogsDate.date.localize (1273534889181));</script></copyright> <lastBuildDate>Mon, 10 May 2010 19:41:29 -0400</lastBuildDate> As you can see, on line 11, at position 25, there's a script block inside the <copyright> element. Other people have reported similar errors with other XML documents. The way I worked around this was to do a StreamReader.ReadToEnd, then do Regex.Replace on the result of that to yank out the script block, before passing the modified string to XmlReader.Create(). Feels like a hack. Has anyone got a better approach? I don't like this because I have to read in a 125k string into memory. Is it valid rss to include "complex content" like that - a script block inside an element?

    Read the article

  • How do HttpOnly cookies work with AJAX requests?

    - by Shawn Simon
    JavaScript needs access to cookies if AJAX is used on a site with access restrictions based on cookies. Will HttpOnly cookies work on an AJAX site? Edit: Microsoft created a way to prevent XSS attacks by disallowing JavaScript access to cookies if HttpOnly is specified. FireFox later adopted this. So my question is: If you are using AJAX on a site, like StackOverflow, are Http-Only cookies an option? Edit 2: Question 2. If the purpose of HttpOnly is to prevent JavaScript access to cookies, and you can still retrieve the cookies via JavaScript through the XmlHttpRequest Object, what is the point of HttpOnly? Edit 3: Here is a quote from Wikipedia: When the browser receives such a cookie, it is supposed to use it as usual in the following HTTP exchanges, but not to make it visible to client-side scripts.[32] The HttpOnly flag is not part of any standard, and is not implemented in all browsers. Note that there is currently no prevention of reading or writing the session cookie via a XMLHTTPRequest. [33]. I understand that document.cookie is blocked when you use HttpOnly. But it seems that you can still read cookie values in the XMLHttpRequest object, allowing for XSS. How does HttpOnly make you any safer than? By making cookies essentially read only? In your example, I cannot write to your document.cookie, but I can still steal your cookie and post it to my domain using the XMLHttpRequest object. <script type="text/javascript"> var req = null; try { req = new XMLHttpRequest(); } catch(e) {} if (!req) try { req = new ActiveXObject("Msxml2.XMLHTTP"); } catch(e) {} if (!req) try { req = new ActiveXObject("Microsoft.XMLHTTP"); } catch(e) {} req.open('GET', 'http://beta.stackoverflow.com/', false); req.send(null); alert(req.getAllResponseHeaders()); </script> Edit 4: Sorry, I meant that you could send the XMLHttpRequest to the StackOverflow domain, and then save the result of getAllResponseHeaders() to a string, regex out the cookie, and then post that to an external domain. It appears that Wikipedia and ha.ckers concur with me on this one, but I would love be re-educated... Final Edit: Ahh, apparently both sites are wrong, this is actually a bug in FireFox. IE6 & 7 are actually the only browsers that currently fully support HttpOnly. To reiterate everything I've learned: HttpOnly restricts all access to document.cookie in IE7 & and FireFox (not sure about other browsers) HttpOnly removes cookie information from the response headers in XMLHttpObject.getAllResponseHeaders() in IE7. XMLHttpObjects may only be submitted to the domain they originated from, so there is no cross-domain posting of the cookies. edit: This information is likely no longer up to date.

    Read the article

  • XmlReader throws on an RSS feed, when the RSS document includes an embedded <script> block.

    - by Cheeso
    The code: using (XmlReader xmlr = XmlReader.Create(new StringReader(allXml))) { var items = from item in SyndicationFeed.Load(xmlr).Items select item; } The exception: Exception: System.Xml.XmlException: Unexpected node type Element. ReadElementString method can only be called on elements with simple or empty content. Line 11, position 25. at System.Xml.XmlReader.ReadElementString() at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadXml(XmlReader reader, SyndicationFeed result) at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadFeed(XmlReader reader) at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadFrom(XmlReader reader) at System.ServiceModel.Syndication.SyndicationFeed.Load[TSyndicationFeed](XmlReader reader) at System.ServiceModel.Syndication.SyndicationFeed.Load(XmlReader reader) at Ionic.ToolsAndTests.ReadRss.Run() in c:\dev\dotnet\ReadRss.cs:line 90 The XML content: <?xml version="1.0" encoding="utf-8"?> <?xml-stylesheet type="text/xsl" href="https://www.ibm.com/developerworks/mydeveloperworks/blogs/roller-ui/styles/rss.xsl" media="screen"?><rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:atom="http://www.w3.org/2005/Atom" > <channel> <title>Software architecture, software engineering, and Renaissance Jazz</title> <link>https://www.ibm.com/developerworks/mydeveloperworks/blogs/gradybooch</link> <atom:link rel="self" type="application/rss+xml" href="https://www.ibm.com/developerworks/mydeveloperworks/blogs/gradybooch/feed/entries/rss?lang=en" /> <description>Software architecture, software engineering, and Renaissance Jazz</description> <language>en-us</language> <copyright>Copyright <script type='text/javascript'> document.write(blogsDate.date.localize (1273534889181));</script></copyright> <lastBuildDate>Mon, 10 May 2010 19:41:29 -0400</lastBuildDate> As you can see, on line 11, at position 25, there's a script block inside the <copyright> element. Other people have reported similar errors with other XML documents. The way I worked around this was to do a StreamReader.ReadToEnd, then do Regex.Replace on the result of that to yank out the script block, before passing the modified string to XmlReader.Create(). Feels like a hack. Has anyone got a better approach? I don't like this because I have to read in a 125k string into memory. Is it valid rss to include "complex content" like that - a script block inside an element? Thanks.

    Read the article

  • sql: Group by x,y,z; return grouped by x,y with lowest f(z)

    - by Sai Emrys
    This is for http://cssfingerprint.com I collect timing stats about how fast the different methods I use perform on different browsers, etc., so that I can optimize the scraping speed. Separately, I have a report about what each method returns for a handful of URLs with known-correct values, so that I can tell which methods are bogus on which browsers. (Each is different, alas.) The related tables look like this: CREATE TABLE `browser_tests` ( `id` int(11) NOT NULL AUTO_INCREMENT, `bogus` tinyint(1) DEFAULT NULL, `result` tinyint(1) DEFAULT NULL, `method` varchar(255) DEFAULT NULL, `url` varchar(255) DEFAULT NULL, `os` varchar(255) DEFAULT NULL, `browser` varchar(255) DEFAULT NULL, `version` varchar(255) DEFAULT NULL, `created_at` datetime DEFAULT NULL, `updated_at` datetime DEFAULT NULL, `user_agent` varchar(255) DEFAULT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB AUTO_INCREMENT=33784 DEFAULT CHARSET=latin1 CREATE TABLE `method_timings` ( `id` int(11) NOT NULL AUTO_INCREMENT, `method` varchar(255) DEFAULT NULL, `batch_size` int(11) DEFAULT NULL, `timing` int(11) DEFAULT NULL, `os` varchar(255) DEFAULT NULL, `browser` varchar(255) DEFAULT NULL, `version` varchar(255) DEFAULT NULL, `user_agent` varchar(255) DEFAULT NULL, `created_at` datetime DEFAULT NULL, `updated_at` datetime DEFAULT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB AUTO_INCREMENT=28849 DEFAULT CHARSET=latin1 (user_agent is broken down pre-insert into browser, version, and os from a small list of recognized values using regex; I keep the original user-agent string just in case.) I have a query like this that tells me the average timing for every non-bogus browser / version / method tuple: select c, avg(bogus) as bog, timing, method, browser, version from browser_tests as b inner join ( select count(*) as c, round(avg(timing)) as timing, method, browser, version from method_timings group by browser, version, method having c > 10 order by browser, version, timing ) as t using (browser, version, method) group by browser, version, method having bog < 1 order by browser, version, timing; Which returns something like: c bog tim method browser version 88 0.8333 184 reuse_insert Chrome 4.0.249.89 18 0.0000 238 mass_insert_width Chrome 4.0.249.89 70 0.0400 246 mass_insert Chrome 4.0.249.89 70 0.0400 327 mass_noinsert Chrome 4.0.249.89 88 0.0556 367 reuse_reinsert Chrome 4.0.249.89 88 0.0556 383 jquery Chrome 4.0.249.89 88 0.0556 863 full_reinsert Chrome 4.0.249.89 187 0.0000 105 jquery Chrome 5.0.307.11 187 0.8806 109 reuse_insert Chrome 5.0.307.11 123 0.0000 110 mass_insert_width Chrome 5.0.307.11 176 0.0000 231 mass_noinsert Chrome 5.0.307.11 176 0.0000 237 mass_insert Chrome 5.0.307.11 187 0.0000 314 reuse_reinsert Chrome 5.0.307.11 187 0.0000 372 full_reinsert Chrome 5.0.307.11 12 0.7500 82 reuse_insert Chrome 5.0.335.0 12 0.2500 102 jquery Chrome 5.0.335.0 [...] I want to modify this query to return only the browser/version/method with the lowest timing - i.e. something like: 88 0.8333 184 reuse_insert Chrome 4.0.249.89 187 0.0000 105 jquery Chrome 5.0.307.11 12 0.7500 82 reuse_insert Chrome 5.0.335.0 [...] How can I do this, while still returning the method that goes with that lowest timing? I could filter it app-side, but I'd rather do this in mysql since it'd work better with my caching.

    Read the article

  • How do I use .htaccess RewriteRule to change underscores to dashes

    - by soopadoubled
    I'm working on a site, and its CMS used to save new page urls using the underscore character as a word seperator. Despite the fact that Google now treats underscore as a word seperator, the SEO powers that be are demanding the site use dashes instead. This is very easy to do within the CMS, and I can of course change all existing URLs saved in the MySQL database that serves the CMS. My problem lies in writing a .htaccess rule that will 301 old style underscore seperated links to the new style hyphenated verstion. I had success using the answers to this Stack Overflow question on other sites, using: RewriteRule ^([^_]*)_([^_]*_.*) $1-$2 [N] RewriteRule ^([^_]*)_([^_]*)$ /$1-$2 [L,R=301] However this CMS site uses a lot of existing rules to produce clean URLs, and I can't get this working in conjunction with the existing rule set. .htaccess currently looks like this: Options FollowSymLinks # RewriteOptions MaxRedirects=50 RewriteEngine On RewriteBase / RewriteCond %{HTTP_HOST} !^www\.mydomain\.co\.uk$ [NC] RewriteRule (.*) http://www.mydomain.co.uk/$1 [R=301,L] #trailing slash enforcement RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !# RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ http://www.mydomain.co.uk/$1/ [L,R=301] RewriteRule ^test/([0-9]+)(/)?$ test_htaccess.php?year=$1 [nc] RewriteRule ^index(/)?$ index.php RewriteRule ^department/([^/]*)/([^/]*)/([^/]*)(/)?$ ecom/index.php?action=ecom.details&mode=$1&$2=$3 [nc] RewriteRule ^department/([^/]*)(/)?$ ecom/index.php?action=ecom.details&mode=$1 [nc] RewriteRule ^product/([^/]*)/([^/]*)/([^/]*)(/)?$ ecom/index.php?action=ecom.pdetails&mode=$1&$2=$3 [nc] RewriteRule ^product/([^/]*)(/)?$ ecom/index.php?action=ecom.pdetails&mode=$1 [nc] RewriteRule ^content/([^/]*)(/)?$ ecom/index.php?action=ecom.cdetails&mode=$1 [nc] RewriteRule ([^/]*)/action/([^/]*)/([^/]*)/([^/]*)/([^/]*)(/)?$ $1/index.php?action=$2&mode=$3&$4=$5 [nc] RewriteRule ([^/]*)/action/([^/]*)/([^/]*)(/)?$ $1/index.php?action=$2&mode=$3 [nc] RewriteRule ([^/]*)/action/([^/]*)(/)?$ $1/index.php?action=$2 [nc] RewriteRule ^eaction/([^/]*)/([^/]*)/([^/]*)/([^/]*)(/)?$ ecom/index.php?action=$1&mode=$2&$3=$4 [nc] RewriteRule ^eaction/([^/]*)/([^/]*)(/)?$ ecom/index.php?action=$1&mode=$2 [nc] RewriteRule ^action/([^/]*)/([^/]*)(/)?$ index.php?action=$1&mode=$2 [nc] RewriteRule ^sid/([^/]*)(/)?$ index.php?sid=$1 [nc] ## Error Handling ## #RewriteRule ^error/([^/]*)(/)?$ index.php?action=error&mode=$1 [nc] # ----------------------------------- Content Section ------------------------------ # #RewriteRule ^([^/]*)(/)?$ index.php?action=cms&mode=$1 [nc] RewriteRule ^accessibility(/)?$ index.php?action=cms&mode=accessibility RewriteRule ^terms(/)?$ index.php?action=cms&mode=conditions RewriteRule ^privacy(/)?$ index.php?action=cms&mode=privacy RewriteRule ^memberpoints(/)?$ index.php?action=cms&mode=member_points RewriteRule ^contactus(/)?$ index.php?action=contactus RewriteRule ^sitemap(/)?$ index.php?action=sitemap ErrorDocument 404 /index.php?action=error&mode=content ExpiresDefault "access plus 3 days" All page URLS are in one of the 3 following formats: http://www.mydomain.com/department/some_page_address/ http://www.mydomain.com/product/some_page_address/ http://www.mydomain.com/content/some_page_address/ I'm sure I am missing something obvious, but at this level my regex and mod_rewrite skills clearly aren't up to par. Any ideas would be greatly appreciated!

    Read the article

  • Modify PHP Search Script to Handle Multiple Entries For a Single Input

    - by Thomas
    I need to modify a php search script so that it can handle multiple entries for a single field. The search engine is designed for a real estate website. The current search form allows users to search for houses by selecting a single neighborhood from a dropdown menu. Instead of a dropdown menu, I would like to use a list of checkboxes so that the the user can search for houses in multiple neighborhoods at one time. I have converted all of the dropdown menu items into checkboxes on the HTML side but the PHP script only searches for houses in the last checkbox selected. For example, if I selected: 'Dallas' 'Boston' 'New York' the search engine will only search for houses in New York. Im new to PHP, so I am a little at a loss as to how to modify this script to handle the behavior I have described: <?php require_once(dirname(__FILE__).'/extra_search_fields.php'); //Add Widget for configurable search. add_action('plugins_loaded',array('DB_CustomSearch_Widget','init')); class DB_CustomSearch_Widget extends DB_Search_Widget { function DB_CustomSearch_Widget($params=array()){ DB_CustomSearch_Widget::__construct($params); } function __construct($params=array()){ $this->loadTranslations(); parent::__construct(__('Custom Fields ','wp-custom-fields-search'),$params); add_action('admin_print_scripts', array(&$this,'print_admin_scripts'), 90); add_action('admin_menu', array(&$this,'plugin_menu'), 90); add_filter('the_content', array(&$this,'process_tag'),9); add_shortcode( 'wp-custom-fields-search', array(&$this,'process_shortcode') ); wp_enqueue_script('jquery'); if(version_compare("2.7",$GLOBALS['wp_version'])>0) wp_enqueue_script('dimensions'); } function init(){ global $CustomSearchFieldStatic; $CustomSearchFieldStatic['Object'] = new DB_CustomSearch_Widget(); $CustomSearchFieldStatic['Object']->ensureUpToDate(); } function currentVersion(){ return "0.3.16"; } function ensureUpToDate(){ $version = $this->getConfig('version'); $latest = $this->currentVersion(); if($version<$latest) $this->upgrade($version,$latest); } function upgrade($current,$target){ $options = $this->getConfig(); if(version_compare($current,"0.3")<0){ $config = $this->getDefaultConfig(); $config['name'] = __('Default Preset','wp-custom-fields-search'); $options['preset-default'] = $config; } $options['version']=$target; update_option($this->id,$options); } function getInputs($params = false,$visitedPresets=array()){ if(is_array($params)){ $id = $params['widget_id']; } else { $id = $params; } if($visitedPresets[$id]) return array(); $visitedPresets[$id]=true; global $CustomSearchFieldStatic; if(!$CustomSearchFieldStatic['Inputs'][$id]){ $config = $this->getConfig($id); $inputs = array(); if($config['preset']) $inputs = $this->getInputs($config['preset'],$visitedPresets); $nonFields = $this->getNonInputFields(); if($config) foreach($config as $k=>$v){ if(in_array($k,$nonFields)) continue; if(!(class_exists($v['input']) && class_exists($v['comparison']) && class_exists($v['joiner']))) { continue; } $inputs[] = new CustomSearchField($v); } foreach($inputs as $k=>$v){ $inputs[$k]->setIndex($k); } $CustomSearchFieldStatic['Inputs'][$id]=$inputs; } return $CustomSearchFieldStatic['Inputs'][$id]; } function getTitle($params){ $config = $this->getConfig($params['widget_id']); return $config['name']; } function form_processPost($post,$old){ unset($post['###TEMPLATE_ID###']); if(!$post) $post=array('exists'=>1); return $post; } function getDefaultConfig(){ return array('name'=>'Site Search', 1=>array( 'label'=>__('Key Words','wp-custom-fields-search'), 'input'=>'TextField', 'comparison'=>'WordsLikeComparison', 'joiner'=>'PostDataJoiner', 'name'=>'all' ), 2=>array( 'label'=>__('Category','wp-custom-fields-search'), 'input'=>'DropDownField', 'comparison'=>'EqualComparison', 'joiner'=>'CategoryJoiner' ), ); } function form_outputForm($values,$pref){ $defaults=$this->getDefaultConfig(); $prefId = preg_replace('/^.*\[([^]]*)\]$/','\\1',$pref); $this->form_existsInput($pref); $rand = rand(); ?> <div id='config-template-<?php echo $prefId?>' style='display: none;'> <?php $templateDefaults = $defaults[1]; $templateDefaults['label'] = 'Field ###TEMPLATE_ID###'; echo $this->singleFieldHTML($pref,'###TEMPLATE_ID###',$templateDefaults); ?> </div> <?php foreach($this->getClasses('input') as $class=>$desc) { if(class_exists($class)) $form = new $class(); else $form = false; if(compat_method_exists($form,'getConfigForm')){ if($form = $form->getConfigForm($pref.'[###TEMPLATE_ID###]',array('name'=>'###TEMPLATE_NAME###'))){ ?> <div id='config-input-templates-<?php echo $class?>-<?php echo $prefId?>' style='display: none;'> <?php echo $form?> </div> <?php } } } ?> <div id='config-form-<?php echo $prefId?>'> <?php if(!$values) $values = $defaults; $maxId=0; $presets = $this->getPresets(); array_unshift($presets,__('NONE','wp-custom-fields-search')); ?> <div class='searchform-name-wrapper'><label for='<?php echo $prefId?>[name]'><?php echo __('Search Title','wp-custom-fields-search')?></label><input type='text' class='form-title-input' id='<?php echo $prefId?>[name]' name='<?php echo $pref?>[name]' value='<?php echo $values['name']?>'/></div> <div class='searchform-preset-wrapper'><label for='<?php echo $prefId?>[preset]'><?php echo __('Use Preset','wp-custom-fields-search')?></label> <?php $dd = new AdminDropDown($pref."[preset]",$values['preset'],$presets); echo $dd->getInput()."</div>"; $nonFields = $this->getNonInputFields(); foreach($values as $id => $val){ $maxId = max($id,$maxId); if(in_array($id,$nonFields)) continue; echo "<div id='config-form-$prefId-$id'>".$this->singleFieldHTML($pref,$id,$val)."</div>"; } ?> </div> <br/><a href='#' onClick="return CustomSearch.get('<?php echo $prefId?>').add();"><?php echo __('Add Field','wp-custom-fields-search')?></a> <script type='text/javascript'> CustomSearch.create('<?php echo $prefId?>','<?php echo $maxId?>'); <?php foreach($this->getClasses('joiner') as $joinerClass=>$desc){ if(compat_method_exists($joinerClass,'getSuggestedFields')){ $options = eval("return $joinerClass::getSuggestedFields();"); $str = ''; foreach($options as $i=>$v){ $k=$i; if(is_numeric($k)) $k=$v; $options[$i] = json_encode(array('id'=>$k,'name'=>$v)); } $str = '['.join(',',$options).']'; echo "CustomSearch.setOptionsFor('$joinerClass',".$str.");\n"; }elseif(eval("return $joinerClass::needsField();")){ echo "CustomSearch.setOptionsFor('$joinerClass',[]);\n"; } } ?> </script> <?php } function getNonInputFields(){ return array('exists','name','preset','version'); } function singleFieldHTML($pref,$id,$values){ $prefId = preg_replace('/^.*\[([^]]*)\]$/','\\1',$pref); $pref = $pref."[$id]"; $htmlId = $pref."[exists]"; $output = "<input type='hidden' name='$htmlId' value='1'/>"; $titles="<th>".__('Label','wp-custom-fields-search')."</th>"; $inputs="<td><input type='text' name='$pref"."[label]' value='$values[label]' class='form-field-title'/></td><td><a href='#' onClick='return CustomSearch.get(\"$prefId\").toggleOptions(\"$id\");'>".__('Show/Hide Config','wp-custom-fields-search')."</a></td>"; $output.="<table class='form-field-table'><tr>$titles</tr><tr>$inputs</tr></table>"; $output.="<div id='form-field-advancedoptions-$prefId-$id' style='display: none'>"; $inputs='';$titles=''; $titles="<th>".__('Data Field','wp-custom-fields-search')."</th>"; $inputs="<td><div id='form-field-dbname-$prefId-$id' class='form-field-title-div'><input type='text' name='$pref"."[name]' value='$values[name]' class='form-field-title'/></div></td>"; $count=1; foreach(array('joiner'=>__('Data Type','wp-custom-fields-search'),'comparison'=>__('Compare','wp-custom-fields-search'),'input'=>__('Widget','wp-custom-fields-search')) as $k=>$v){ $dd = new AdminDropDown($pref."[$k]",$values[$k],$this->getClasses($k),array('onChange'=>'CustomSearch.get("'.$prefId.'").updateOptions("'.$id.'","'.$k.'")','css_class'=>"wpcfs-$k")); $titles="<th>".$v."</th>".$titles; $inputs="<td>".$dd->getInput()."</td>".$inputs; if(++$count==2){ $output.="<table class='form-field-table form-class-$k'><tr>$titles</tr><tr>$inputs</tr></table>"; $count=0; $inputs = $titles=''; } } if($titles){ $output.="<table class='form-field-table'><tr>$titles</tr><tr>$inputs</tr></table>"; $inputs = $titles=''; } $titles.="<th>".__('Numeric','wp-custom-fields-search')."</th><th>".__('Widget Config','wp-custom-fields-search')."</th>"; $inputs.="<td><input type='checkbox' ".($values['numeric']?"checked='true'":"")." name='$pref"."[numeric]'/></td>"; if(class_exists($widgetClass = $values['input'])){ $widget = new $widgetClass(); if(compat_method_exists($widget,'getConfigForm')) $widgetConfig=$widget->getConfigForm($pref,$values); } $inputs.="<td><div id='$this->id"."-$prefId"."-$id"."-widget-config'>$widgetConfig</div></td>"; $output.="<table class='form-field-table'><tr>$titles</tr><tr>$inputs</tr></table>"; $output.="</div>"; $output.="<a href='#' onClick=\"return CustomSearch.get('$prefId').remove('$id');\">Remove Field</a>"; return "<div class='field-wrapper'>$output</div>"; } function getRootURL(){ return WP_CONTENT_URL .'/plugins/' . dirname(plugin_basename(__FILE__) ) . '/'; } function print_admin_scripts($params){ $jsRoot = $this->getRootURL().'js'; $cssRoot = $this->getRootURL().'css'; $scripts = array('Class.js','CustomSearch.js','flexbox/jquery.flexbox.js'); foreach($scripts as $file){ echo "<script src='$jsRoot/$file' ></script>"; } echo "<link rel='stylesheet' href='$cssRoot/admin.css' >"; echo "<link rel='stylesheet' href='$jsRoot/flexbox/jquery.flexbox.css' >"; } function getJoiners(){ return $this->getClasses('joiner'); } function getComparisons(){ return $this->getClasses('comparison'); } function getInputTypes(){ return $this->getClasses('input'); } function getClasses($type){ global $CustomSearchFieldStatic; if(!$CustomSearchFieldStatic['Types']){ $CustomSearchFieldStatic['Types'] = array( "joiner"=>array( "PostDataJoiner" =>__( "Post Field",'wp-custom-fields-search'), "CustomFieldJoiner" =>__( "Custom Field",'wp-custom-fields-search'), "CategoryJoiner" =>__( "Category",'wp-custom-fields-search'), "TagJoiner" =>__( "Tag",'wp-custom-fields-search'), "PostTypeJoiner" =>__( "Post Type",'wp-custom-fields-search'), ), "input"=>array( "TextField" =>__( "Text Input",'wp-custom-fields-search'), "DropDownField" =>__( "Drop Down",'wp-custom-fields-search'), "RadioButtonField" =>__( "Radio Button",'wp-custom-fields-search'), "HiddenField" =>__( "Hidden Constant",'wp-custom-fields-search'), ), "comparison"=>array( "EqualComparison" =>__( "Equals",'wp-custom-fields-search'), "LikeComparison" =>__( "Phrase In",'wp-custom-fields-search'), "WordsLikeComparison" =>__( "Words In",'wp-custom-fields-search'), "LessThanComparison" =>__( "Less Than",'wp-custom-fields-search'), "MoreThanComparison" =>__( "More Than",'wp-custom-fields-search'), "AtMostComparison" =>__( "At Most",'wp-custom-fields-search'), "AtLeastComparison" =>__( "At Least",'wp-custom-fields-search'), "RangeComparison" =>__( "Range",'wp-custom-fields-search'), //TODO: Make this work... // "NotEqualComparison" =>__( "Not Equal To",'wp-custom-fields-search'), ) ); $CustomSearchFieldStatic['Types'] = apply_filters('custom_search_get_classes',$CustomSearchFieldStatic['Types']); } return $CustomSearchFieldStatic['Types'][$type]; } function plugin_menu(){ add_options_page('Form Presets','WP Custom Fields Search',8,__FILE__,array(&$this,'presets_form')); } function getPresets(){ $presets = array(); foreach(array_keys($config = $this->getConfig()) as $key){ if(strpos($key,'preset-')===0) { $presets[$key] = $key; if($name = $config[$key]['name']) $presets[$key]=$name; } } return $presets; } function presets_form(){ $presets=$this->getPresets(); if(!$preset = $_REQUEST['selected-preset']){ $preset = 'preset-default'; } if(!$presets[$preset]){ $defaults = $this->getDefaultConfig(); $options = $this->getConfig(); $options[$preset] = $defaults; if($n = $_POST[$this->id][$preset]['name']) $options[$preset]['name'] = $n; elseif($preset=='preset-default') $options[$preset]['name'] = 'Default'; else{ list($junk,$id) = explode("-",$preset); $options[$preset]['name'] = 'New Preset '.$id; } update_option($this->id,$options); $presets[$preset] = $options[$preset]['name']; } if($_POST['delete']){ check_admin_referer($this->id.'-editpreset-'.$preset); $options = $this->getConfig(); unset($options[$preset]); unset($presets[$preset]); update_option($this->id,$options); list($preset,$name) = each($presets); } $index = 1; while($presets["preset-$index"]) $index++; $presets["preset-$index"] = __('New Preset','wp-custom-fields-search'); $linkBase = $_SERVER['REQUEST_URI']; $linkBase = preg_replace("/&?selected-preset=[^&]*(&|$)/",'',$linkBase); foreach($presets as $key=>$name){ $config = $this->getConfig($key); if($config && $config['name']) $name=$config['name']; if(($n = $_POST[$this->id][$key]['name'])&&(!$_POST['delete'])) $name = $n; $presets[$key]=$name; } $plugin=&$this; ob_start(); wp_nonce_field($this->id.'-editpreset-'.$preset); $hidden = ob_get_contents(); $hidden.="<input type='hidden' name='selected-preset' value='$preset'>"; $shouldSave = $_POST['selected-preset'] && !$_POST['delete'] && check_admin_referer($this->id.'-editpreset-'.$preset); ob_end_clean(); include(dirname(__FILE__).'/templates/options.php'); } function process_tag($content){ $regex = '/\[\s*wp-custom-fields-search\s+(?:([^\]=]+(?:\s+.*)?))?\]/'; return preg_replace_callback($regex, array(&$this, 'generate_from_tag'), $content); } function process_shortcode($atts,$content){ return $this->generate_from_tag(array("",$atts['preset'])); } function generate_from_tag($reMatches){ global $CustomSearchFieldStatic; ob_start(); $preset=$reMatches[1]; if(!$preset) $preset = 'default'; wp_custom_fields_search($preset); $form = ob_get_contents(); ob_end_clean(); return $form; } } global $CustomSearchFieldStatic; $CustomSearchFieldStatic['Inputs'] = array(); $CustomSearchFieldStatic['Types'] = array(); class AdminDropDown extends DropDownField { function AdminDropDown($name,$value,$options,$params=array()){ AdminDropDown::__construct($name,$value,$options,$params); } function __construct($name,$value,$options,$params=array()){ $params['options'] = $options; $params['id'] = $params['name']; parent::__construct($params); $this->name = $name; $this->value = $value; } function getHTMLName(){ return $this->name; } function getValue(){ return $this->value; } function getInput(){ return parent::getInput($this->name,null); } } if (!function_exists('json_encode')) { function json_encode($a=false) { if (is_null($a)) return 'null'; if ($a === false) return 'false'; if ($a === true) return 'true'; if (is_scalar($a)) { if (is_float($a)) { // Always use "." for floats. return floatval(str_replace(",", ".", strval($a))); } if (is_string($a)) { static $jsonReplaces = array(array("\\", "/", "\n", "\t", "\r", "\b", "\f", '"'), array('\\\\', '\\/', '\\n', '\\t', '\\r', '\\b', '\\f', '\"')); return '"' . str_replace($jsonReplaces[0], $jsonReplaces[1], $a) . '"'; } else return $a; } $isList = true; for ($i = 0, reset($a); $i < count($a); $i++, next($a)) { if (key($a) !== $i) { $isList = false; break; } } $result = array(); if ($isList) { foreach ($a as $v) $result[] = json_encode($v); return '[' . join(',', $result) . ']'; } else { foreach ($a as $k => $v) $result[] = json_encode($k).':'.json_encode($v); return '{' . join(',', $result) . '}'; } } } function wp_custom_fields_search($presetName='default'){ global $CustomSearchFieldStatic; if(strpos($presetName,'preset-')!==0) $presetName="preset-$presetName"; $CustomSearchFieldStatic['Object']->renderWidget(array('widget_id'=>$presetName,'noTitle'=>true),array('number'=>$presetName)); } function compat_method_exists($class,$method){ return method_exists($class,$method) || in_array(strtolower($method),get_class_methods($class)); }

    Read the article

  • jquery data selector

    - by Tauren
    I need to select elements based on values stored in an element's .data() object. At a minimum, I'd like to select top-level data properties using selectors, perhaps like this: $('a').data("category","music"); $('a:data(category=music)'); Or perhaps the selector would be in regular attribute selector format: $('a[category=music]'); Or in attribute format, but with a specifier to indicate it is in .data(): $('a[:category=music]'); I've found James Padolsey's implementation to look simple, yet good. The selector formats above mirror methods shown on that page. There is also this Sizzle patch. For some reason, I recall reading a while back that jQuery 1.4 would include support for selectors on values in the jquery .data() object. However, now that I'm looking for it, I can't find it. Maybe it was just a feature request that I saw. Is there support for this and I'm just not seeing it? Ideally, I'd like to support sub-properties in data() using dot notation. Like this: $('a').data("user",{name: {first:"Tom",last:"Smith"},username: "tomsmith"}); $('a[:user.name.first=Tom]'); I also would like to support multiple data selectors, where only elements with ALL specified data selectors are found. The regular jquery multiple selector does an OR operation. For instance, $('a.big, a.small') selects a tags with either class big or small). I'm looking for an AND, perhaps like this: $('a').data("artist",{id: 3281, name: "Madonna"}); $('a').data("category","music"); $('a[:category=music && :artist.name=Madonna]'); Lastly, it would be great if comparison operators and regex features were available on data selectors. So $(a[:artist.id>5000]) would be possible. I realize I could probably do much of this using filter(), but it would be nice to have a simple selector format. What solutions are available to do this? Is Jame's Padolsey's the best solution at this time? My concern is primarily in regards to performance, but also in the extra features like sub-property dot-notation and multiple data selectors. Are there other implementations that support these things or are better in some way?

    Read the article

  • UITableViewCell with selectable/copyable text that also detects URLs on the iPhone

    - by Jasarien
    Hi guys, I have a problem. Part of my app requires text to be shown in a table. The text needs to be selectable/copyable (but not editable) and any URLs within the text need to be highlighted and and when tapped allow me to take that URL and open my embedded browser. I have seen a couple of solutions that solve one of either of these problems, but not both. Solution 1: Icon Factory's IFTweetLabel The first solution I tried was to use the IFTweetLabel class made possible by Icon Factory and used in Twitterrific. While this solution allows for links (or anything you can find with a regex) to be detected to be handled on a case by case basis, it doesn't allow for selecting and copying. There is also an issue where if a URL is long enough to be wrapped, the button that the class overlays above the URL to make it interactive cannot wrap and draws off screen, looking very odd. Solution 2: Use IFTweetLabel and handle copy manually The second thing I tried was to keep IFTweetLabel in place to handle the links, but to implement the copying using a long-tap gesture, like how the SMS app handles it. This was just about working, but it doesn't allow for arbitrary selection of text, the whole text is copied, or none is copied at all... Pretty black and white. Solution 3: UITextView My third attempt was to add a UITextView as a subview of the table cell. The only thing that this doesn't solve is the fact that detected URLs cannot be handled by me. The text view uses UIApplication's openURL: method which quits my app and launched Safari. Also, as the table view can get quite large, the number of UITextViews added as subviews cause a noticeable performance drag on scrolling throughout the table, especially on iPhone 3G era devices (because of the creation, layout, compositing whenever a cell is scrolled on screen, etc). So my question to all you knowledgeable folk out there is: What can I do? Would a UIWebView be the best option? Aside from a performance drag, I think a webview would solve all the above issues, and if I remember correctly, back in the 2.0 days, the Apple documentation actually recommended web views where text formatting / hyperlinks were required. Can anyone think of a way to achieve this without a performance drag? Many thanks in advance to everyone who can help.

    Read the article

  • Common DataAnnotations in ASP.Net MVC2

    - by Scott Mayfield
    Howdy, I have what should be a simple question. I have a set of validations that use System.CompontentModel.DataAnnotations . I have some validations that are specific to certain view models, so I'm comfortable with having the validation code in the same file as my models (as in the default AccountModels.cs file that ships with MVC2). But I have some common validations that apply to several models as well (valid email address format for example). When I cut/paste that validation to the second model that needs it, of course I get a duplicate definition error because they're in the same namespace (projectName.Models). So I thought of removing the common validations to a separate class within the namespace, expecting that all of my view models would be able to access the validations from there. Unexpectedly, the validations are no longer accessible. I've verified that they are still in the same namespace, and they are all public. I wouldn't expect that I would have to have any specific reference to them (tried adding using statement for the same namespace, but that didn't resolve it, and via the add references dialog, a project can't reference itself (makes sense). So any idea why public validations that have simply been moved to another file in the same namespace aren't visible to my models? CommonValidations.cs using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.ComponentModel; using System.ComponentModel.DataAnnotations; using System.Text.RegularExpressions; namespace ProjectName.Models { public class CommonValidations { [AttributeUsage(AttributeTargets.Field | AttributeTargets.Property, AllowMultiple = true, Inherited = true)] public sealed class EmailFormatValidAttribute : ValidationAttribute { public override bool IsValid(object value) { if (value != null) { var expression = @"^[a-zA-Z][\w\.-]*[a-zA-Z0-9]@[a-zA-Z0-9][\w\.-]*[a-zA-Z0-9]\.[a-zA-Z][a-zA-Z\.]*[a-zA-Z]$"; return Regex.IsMatch(value.ToString(), expression); } else { return false; } } } } } And here's the code that I want to use the validation from: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.ComponentModel; using System.ComponentModel.DataAnnotations; using Growums.Models; namespace ProjectName.Models { public class PrivacyModel { [Required(ErrorMessage="Required")] [EmailFormatValid(ErrorMessage="Invalid Email")] public string Email { get; set; } } }

    Read the article

  • Any software for pattern-matching and -rewriting source code?

    - by Steven A. Lowe
    I have some old software (in a language that's not dead but is dead to me ;-)) that implements a basic pattern-matching and -rewriting system for source code. I am considering resurrecting this code, translating it into a modern language, and open-sourcing the project as a refactoring power-tool. Before I go much further, I want to know if anything like this exists already (my google-fu is fanning air on this tonight). Here's how it works: the pattern-matching part matches source-code patterns spanning multiple lines of code using a template with binding variables, the pattern-rewriting part uses a template to rewrite the matched code, inserting the contents of the bound variables from the matching template matching and rewriting templates are associated (1:1) by a simple (unconditional) rewrite rule the software operates on the abstract syntax tree (AST) of the input application, and outputs a modified AST which can then be regenerated into new source code for example, suppose we find a bunch of while-loops that really should be for-loops. The following template will match the while-loop pattern: Template oldLoopPtrn int @cnt@ = 0; while (@cnt@ < @max@) { … @body@ ++@cnt@; } End_Template while the following template will specify the output rewrite pattern: Template newLoopPtrn for(int @cnt@ = 0; @cnt@ < @max@; @cnt@++) { @body@ } End_Template and a simple rule to associate them Rule oldLoopPtrn --> newLoopPtrn so code that looks like this int i=0; while(i<arrlen) { printf("element %d: %f\n",i,arr[i]); ++i; } gets automatically rewritten to look like this for(int i = 0; i < arrlen; i++) { printf("element %d: %f\n",i,arr[i]); } The closest thing I've seen like this is some of the code-refactoring tools, but they seem to be geared towards interactive rewriting of selected snippets, not wholesale automated changes. I believe that this kind of tool could supercharge refactoring, and would work on multiple languages (even HTML/CSS). I also believe that converting and polishing the code base would be a huge project that I simply cannot do alone in any reasonable amount of time. So, anything like this out there already? If not, any obvious features (besides rewrite-rule conditions) to consider? EDIT: The one feature of this system that I like very much is that the template patterns are fairly obvious and easy to read because they're written in the same language as the target source code, not in some esoteric mutated regex/BNF format.

    Read the article

  • WPF MVVM: Convention over Configuration for ResourceDictionary ?

    - by Jeffrey Knight
    Update In the wiki spirit of StackOverflow, here's an update: I spiked Joe White's IValueConverter suggestion below. It works like a charm. I've written a "quickstart" example of this that automates the mapping of ViewModels-Views using some cheap string replacement. If no View is found to represent the ViewModel, it defaults to an "Under Construction" page. I'm dubbing this approach "WPF MVVM White" since it was Joe White's idea. Here are a couple screenshots. The first image is a case of "[SomeControlName]ViewModel" has a corresponding "[SomeControlName]View", based on pure naming convention. The second is a case where the ModelView doesn't have any views to represent it. No more ResourceDictionaries with long ViewModel to View mappings. It's pure naming convention now. I'm hosting a download of the project here: http://rootsilver.com/files/Mvvm.White.Quickstart.zip I'll follow up with a longer blog post walk through. Original Post I read Josh Smith's fantastic MSDN article on WPF MVVM over the weekend. It's destined to be a cult classic. It took me a while to wrap my head around the magic of asking WPF to render the ViewModel. It's like saying "Here's a class, WPF. Go figure out which UI to use to present it." For those who missed this magic, WPF can do this by looking up the View for ModelView in the ResourceDictionary mapping and pulling out the corresponding View. (Scroll down to Figure 10 Supplying a View ). The first thing that jumps out at me immediately is that there's already a strong naming convention of: classNameView ("View" suffix) classNameViewModel ("ViewModel" suffix) My question is: Since the ResourceDictionary can be manipulated programatically, I"m wondering if anyone has managed to Regex.Replace the whole thing away, so the lookup is automatic, and any new View/ViewModels get resolved by virtue of their naming convention? [Edit] What I'm imagining is a hook/interception into ResourceDictionary. ... Also considering a method at startup that uses interop to pull out *View$ and *ViewModel$ class names to build the DataTemplate dictionary in code: //build list foreach .... String.Format("<DataTemplate DataType=\"{x:Type vm:{0} }\"><v:{1} /></DataTemplate>", ...)

    Read the article

  • PHP-based LaTeX parser -- where to begin?

    - by Alex Basson
    The project: I want to build a LaTeX-to-MathML translator in PHP. Why? Because I'm a mathematician, and I want to publish math on my Drupal site. It doesn't have to translate all of LaTeX, since the basic document-level stuff is ably handled by the CMS and wouldn't be written in LaTeX to begin with; it just has to translate math written in LaTeX into math written in MathML. Although I feel as though I've done my due diligence, this doesn't seem to exist already. Maybe I'm wrong---if you know of something that would serve this purpose, by all means let me know, and thank you in advance. But assuming it doesn't exist, I guess I have to go write it myself. Here's the thing, though: I've never done anything this ambitious. I don't really know where to begin. I've used PHP for years, but just to do the standard "build a CMS with PHP and MySQL"-type of stuff. I've never attempted anything as seemingly sophisticated as translation from one language to another. I'm just dumb enough to consider doing it with regex---after all, LaTeX is a much more formal language, and it doesn't allow for nearly the kinds of pathological edge-cases, as say, HTML. But on the other hand, I'm just smart enough to realize this is probably a terrible idea: now I have two problems, and I sure don't want to end up like this guy. So if that's not the way to go (right?), what is? How should I start thinking about this problem? Am I essentially writing a LaTeX compiler in PHP, and if so, what do I need to know to do that (like, should I just go read the Purple Dragon book first?)? I'm both really excited and pretty intimidated by the prospect of this project, but hey, this is how we all learn to be programmers, right? If something we need doesn't exist, we go and build it, necessity is the mother of... you get the point. Tremendous thanks to everyone in advance for any and all guidance you can offer.

    Read the article

  • architecture python question

    - by tom smith
    hi. creating a distributed crawling python app. it consists of a master server, and associated client apps that will run on client servers. the purpose of the client app is to run across a targeted site, to extract specific data. the clients need to go "deep" within the site, behind multiple levels of forms, so each client is specifically geared towards a given site. each client app looks something like main: parse initial url call function level1 (data1) function level1 (data) parse the url, for data1 use the required xpath to get the dom elements call the next function call level2 (data) function level2 (data2) parse the url, for data2 use the required xpath to get the dom elements call the next function call level3 function level3 (dat3) parse the url, for data3 use the required xpath to get the dom elements call the next function call level4 function level4 (data) parse the url, for data4 use the required xpath to get the dom elements at the final function.. --all the data output, and eventually returned to the server --at this point the data has elements from each function... my question: given that the number of calls that is made to the child function by the current function varies, i'm trying to figure out the best approach. each function essentialy fetches a page of content, and then parses the page using a number of different XPath expressions, combined with different regex expressions depending on the site/page. if i run a client on a single box, as a sequential process, it'll take awhile, but the load on the box is rather small. i've thought of attempting to implement the child functions as threads from the current function, but that could be a nightmare, as well as quickly bring the "box" to its knees! i've thought of breaking the app up in a manner that would allow the master to essentially pass packets to the client boxes, in a way to allow each client/function to be run directly from the master. this process requires a bit of rewrite, but it has a number of advantages. a bunch of redundancy, and speed. it would detect if a section of the process was crashing and restart from that point. but not sure if it would be any faster... i'm writing the parsing scripts in python.. so... any thoughts/comments would be appreciated... i can get into a great deal more detail, but didn't want to bore anyone!! thanks! tom

    Read the article

  • DataAnnotation attributes buddy class strangeness - ASP.NET MVC

    - by JK
    Given this POCO class that was automatically generated by an EntityFramework T4 template (has not and can not be manually edited in any way): public partial class Customer { [Required] [StringLength(20, ErrorMessage = "Customer Number - Please enter no more than 20 characters.")] [DisplayName("Customer Number")] public virtual string CustomerNumber { get;set; } [Required] [StringLength(10, ErrorMessage = "ACNumber - Please enter no more than 10 characters.")] [DisplayName("ACNumber")] public virtual string ACNumber{ get;set; } } Note that "ACNumber" is a badly named database field, so the autogenerator is unable to generate the correct display name and error message which should be "Account Number". So we manually create this buddy class to add custom attributes that could not be automatically generated: [MetadataType(typeof(CustomerAnnotations))] public partial class Customer { } public class CustomerAnnotations { [NumberCode] // This line does not work public virtual string CustomerNumber { get;set; } [StringLength(10, ErrorMessage = "Account Number - Please enter no more than 10 characters.")] [DisplayName("Account Number")] public virtual string ACNumber { get;set; } } Where [NumberCode] is a simple regex based attribute that allows only digits and hyphens: [AttributeUsage(AttributeTargets.Property)] public class NumberCodeAttribute: RegularExpressionAttribute { private const string REGX = @"^[0-9-]+$"; public NumberCodeAttribute() : base(REGX) { } } NOW, when I load the page, the DisplayName attribute works correctly - it shows the display name from the buddy class not the generated class. The StringLength attribute does not work correctly - it shows the error message from the generated class ("ACNumber" instead of "Account Number"). BUT the [NumberCode] attribute in the buddy class does not even get applied to the AccountNumber property: foreach (ValidationAttribute attrib in prop.Attributes.OfType<ValidationAttribute>()) { // This collection correctly contains all the [Required], [StringLength] attributes // BUT does not contain the [NumberCode] attribute ApplyValidation(generator, attrib); } Why does the prop.Attributes.OfType<ValidationAttribute>() collection not contain the [NumberCode] attribute? NumberCode inherits RegularExpressionAttribute which inherits ValidationAttribute so it should be there. If I manually move the [NumberCode] attribute to the autogenerated class, then it is included in the prop.Attributes.OfType<ValidationAttribute>() collection. So what I don't understand is why this particular attribute does not work in when in the buddy class, when other attributes in the buddy class do work. And why this attribute works in the autogenerated class, but not in the buddy. Any ideas? Also why does DisplayName get overriden by the buddy, when StringLength does not?

    Read the article

  • XSLT - make xsl:analyze-string return string instead of sequence of strings?

    - by tohuwawohu
    Is it possible to make xsl:analyze-string return one string instead of a sequence of strings? Background: I'd like to use xsl:analyze-string in a xsl:function that should encapsulate the pattern matching. Ideally, the function should return an xs:string to be used as sort criteria in an xsl:sort element. At the moment, i have to apply string-join() on every result of the function call since xsl:analyze-string returns a sequence of strings, and xsl:sort doesn't accept such a sequence as sort criteria. See line 24 of the stylesheet: <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:my="www.my-personal-namespa.ce" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xsl:output indent="yes" method="xml" /> <xsl:function name="my:sortierung" > <xsl:param name="inputstring" as="xs:string"/> <xsl:analyze-string select="$inputstring" regex="[0-9]+"> <xsl:matching-substring> <xsl:value-of select="format-number(number(.), '00000')" /> </xsl:matching-substring> <xsl:non-matching-substring> <xsl:value-of select="." /> </xsl:non-matching-substring> </xsl:analyze-string> </xsl:function> <xsl:template match="/input"> <result> <xsl:apply-templates select="value" > <xsl:sort select="string-join((my:sortierung(.)), ' ')" /> </xsl:apply-templates> </result> </xsl:template> <xsl:template match="value"> <xsl:copy-of select="." /> </xsl:template> </xsl:stylesheet> with this input: <?xml version="1.0" encoding="UTF-8"?> <input> <value>A 1 b 120</value> <value>A 1 b 1</value> <value>A 1 b 2</value> <value>A 1 b 1a</value> </input> In my example, is there a way to modify the xsl:function to return a xs:string instead of a sequence?

    Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220  | Next Page >