Search Results

Search found 10679 results on 428 pages for 'scan disk'.

Page 214/428 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

  • Partition is gone after power failure

    - by David
    Just had a power failure and am just going through my 4 usbdisks to remount them and found that 1 (the most important one) is coming back as 'doesn't contain a valid partition table'. What can I do to try to repair the disk and hopefully retrieve the partition? Lukily I do nightly backups. but would like to get what was there today if possible.

    Read the article

  • Optimal Memory Configuration for Dell PowerEdge 1800 (Windows Server 2000 32bit)

    - by David Murdoch
    I am upgrading the memory on a Dell PowerEdge 1800 Server running Windows Server 2000 (32 bit). My Computer Properties currently reports "2,096,432 KB RAM" (4 modules @ 512MB each). Crucial.com scan reports: "Each memory slot can hold DDR2 PC2-5300 with a maximum of 2GB per slot. Maximum Memory Capacity:  12288MB Currently Installed Memory:  2GB Available Memory Slots:  2 Total Memory Slots:  6 Dual Channel Support:   No CPU Manufacturer:  GenuineIntel CPU Family:  Intel(R) Xeon(TM) CPU 2.80GHz Model 4, Stepping 1 CPU Speed:  2793 MHz Installed in pairs of modules." We will be completely replacing the old 512 MB modules. Will there be any performance difference between installing 4 modules @ 1GB vs. 2 modules @ 2GB?

    Read the article

  • OS X wants to back up Macintosh HD to itself

    - by slhck
    From time to time, OS X (10.6) will ask me if I want to perform a backup of my Macintosh HD, but the backup destination is obviously the HD itself. I have not plugged in any external device, nor is there a Time Capsule network share. A message like this will appear: Moreover, the Macintosh HD will suddenly have a Time Machine icon in Finder. Has somebody experienced the same and could help me identify how to stop OS X from using its own disk as the backup destination?

    Read the article

  • Change Drobo directory permissions

    - by Steven Scott
    I have a Drobo unit that is connected via fire-wire to a Dell notebook. Using Ubuntu 12.04. I can not seem to change the permissions to allow all users to have read/write access to the drives. The unit is automatically mounting the volumes as my user using the system, so other applications can not access the device. I want to set up a Plex Media Server to stream music, etc... but it will not scan the drives since it can not access them. How can I change the permissions to allow everyone to read the volumes? IF I add them to the fstab as ntfs volumes, Ubuntu reports that they are not available during the boot up, likely due to the fire-wire not having found the drives yet. Any ideas or suggestions would be greatly appreciated.

    Read the article

  • NAS box discs sharing in domain

    - by Murdock
    I got problem with data sharing of my QNAP NAS Box TS-409 Series with 3 x 750 GB disk (in RAID 5) into domain via File server service. This device is designed mainly to be mapped as a network drive and through its own interface are configured users and policies. I'd like to have it bound with domain user accounts a there to set up security and other policies. Thanks for any suggestion.

    Read the article

  • Stream video from one app to another in OS X (Software video input device)

    - by Josh
    Is there any way to take a video stream from one application, for example VLC Media Player, and present that video stream to other applications as a video input source? For example, could I broadcast a video file from my hard disk to a website that allows video conferencing using a Flash applet? Basically, I'm looking for something like Soundflower, but for video streams. Is this possible?

    Read the article

  • Resizing Partitions on Live RHEL/cPanel Server

    - by Timothy R. Butler
    I've resized many partitions over the years on Linux, Windows and Mac OS X -- but always using a GUI. However, the time has come where the preset partition sizes my data center placed on my server aren't the right sizes and I need to resize a production server's disks. I could fiddle with it and probably do OK, but given that it is a production server, I wanted to get some advice about the right way to do this. I do have KVM over IP access, so if it is best to take the server offline and boot off a rescue partition, I can do that. root [/var/lib/mysql]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 2.1G 7.3G 23% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 99M 77M 18M 82% /boot /dev/sda8 884G 463G 376G 56% /home /dev/sda3 9.9G 8.0G 1.5G 85% /usr /dev/sda5 9.9G 9.1G 308M 97% /var /usr/tmpDSK 2.0G 38M 1.8G 3% /tmp As you can see /var and /usr are quite close to being full and I've actually had to symlink some logs on /usr to directories in /home to balance things out. What I would like to do is to add 6-10 GB each to /usr and /var, presumably taking the space from /home. As I think about how the disk is arranged, the best thought I've come up with is to reduce /home by 16 GB, say, and move /var to the spot freed up, then allocating /var's space to /usr. However, that would put /var at the far end of the disk, which seems less than idea, given that MySQL has all of its data on that partition. I'd love to take the space out of the closer end of /usr, but I assume that would take a very arduous (and perhaps risky) process of moving all of the data in /usr around. I seem to recall having such a process fail for me on a computer in the past. The other option might be to merge / and /usr since / is underutilized, though I'm not sure if that's a good idea. Do you have any suggestions both on the best reallocation plan and the commands to use to accomplish it? UPDATE: I should add -- here's the partition table. There's one unused partition, which, if memory serves, was the original tmp location before I created a tmp image: Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ Unusable 1.05* sda1 Boot Primary Linux ext2 106.96* sda2 Primary Linux ext3 10737.42* sda3 Primary Linux ext3 10737.42* sda5 NC Logical Linux ext3 10738.47* sda6 NC Logical Linux swap / Solaris 2148.54* sda7 NC Logical Linux ext3 1074.80* sda8 NC Logical Linux ext3 964098.53*

    Read the article

  • ESXi 5.1 on Poweredge 510 freezes after base-esx update

    - by goober
    Background / Problem Just experienced an issue where an ESXi host was upgraded from 5.0 -- 5.1 perfectly fine. Then, I did a scan and remediated a patch (ESXi510-201210401-BG) Looking into the host on via the kvm switch, this appears to complete successfully. However, on reboot, the server hangs at the "Initializing Power Management" phase. I've read from various spots around the internet that this usually clears itself up again upon a cold boot, but given that our servers are in a different building with different access rules, the less I have to physically go there, the better. :) Question Is there anything I can do to avoid an ESXi host hanging at the "initialize power management" phase of boot after remediating the host to apply patches?

    Read the article

  • Win7 Install - diskpart shrink command

    - by chris
    I have an existing XP installation on a 160GB disk, with about 90 GB free. I'm trying to install Win7 on the same HDD, following directions from here. The question is: How long should it take to run the "shrink" command, given the above parameters? How much space will that free up for Win7?

    Read the article

  • What is stored in %Windir%\System32\LogFiles\WMI\RtBackup?

    - by Helge Klein
    I occasionally notice in Resource Monitor hard disk activity related to ETL files in the folder C:\Windows\System32\LogFiles\WMI\RtBackup. Which process/service creates these ETL files and what is their purpose? Resource Monitor shows "System" as the process which is correct since ETW traces (that is what ETL files are) are created by the kernel. But I am interested in the process that causes the traces to be created. This happens on Windows 7, by the way.

    Read the article

  • Ubuntu 10.04 (LTS) DomU on Debian Wheezy Dom0 Xen 4

    - by mdjp
    I have been forced to move from a Centos Dom0 xen 3 Centos + Ubuntu Lucid DomUs To Debian Wheezy Dom0 Xen 4 Ubuntu Lucid DomUs However although I can create new DomUs on wheezy I cannot get them to boot. pygrub returns Error: Bootloader didn't return any data I have ensured that the disks are the correct way around in the xen.cfg and also that the grub config is correct. If I try to run pygrub manually eg /usr/bin/pygrub /dev/volgroup/disk I get Illegal instruction can anyone offer me any advice on this? Thanks Matt

    Read the article

  • What virus renames all images to EXE?

    - by user29373
    I have a virus that renames all jpg file extensions to EXE files and hide the original files at the same folder!! I can see hidden Files with FarManager and I cannot see them in Windows Explorer(even with show hidden files option?!!) How can I restore it to its original file extension? Do you have any tool to scan the converted file and restore it to its original file extension? What the virus name? how can I remove it manually?

    Read the article

  • Accidentally moved FUSE mounted mount point, not cannot unmount. Any option besides reboot?

    - by Catskul
    I mounted a disk image using a few different FUSE modules and then subsequently renamed the parent directory. The mounts have disappeared from the mtab and now the OS refuses to unmount them. fusermount -u mnt returns: fusermount: entry for /home/catskul/foo/mnt not found in /etc/mtab sudo fusermount -u mnt returns: fusermount: failed to unmount /home/catskul/foo/mnt: Device or resource busy sudo fuser -a mnt returns: Cannot stat file /proc/986/fd/55: Permission denied mnt:

    Read the article

  • How do I create a Ghost Boot CD?

    - by Webs
    For a previous job, my boss wanted to keep using Ghost and didn't want to switch to Clonezilla (which I recommend) but wanted a way to Ghost all machines and even future ones from one disk or CD. So I need a Ghose Boot CD that not only clones all systems we have, but would be editable for future systems.

    Read the article

  • External USB HD issues with a twist (works on Windows7 but not XP)

    - by Eruditass
    I have this older external USB HD, 160 GB. I was using it to copy my Steam games to another computer. On the source computer, Windows 7 64-bit, everything worked fine. Drive reported no errors, had no hiccups, etc. Plugging it into the Windows XP 32-bit computer, it worked fine for looking through the files, moving files around on it (no real reading/writing, just modifying the filesystem table). However, when copying files from it to my internal HD, after a couple seconds to tens of minutes (seemingly random times), the USB device becomes unrecognized and it reports a delayed write error. Events in system log go like this, chronologically: (number times displayed)xSource (Event ID): "message" 2xdisk (51): An error was detected on device \Device\Harddisk1\D during a paging operation. 1xftdisk (57): The system failed to flush data to the transaction log. Corruption may occur. 1xApplication popup (26): Windows - Delayed Write Failed : Windows was unable to save all the data for the file E:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. 1xntfs (50): {Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. These repeat for a while, then there is 10+ disk messages or ftdisk messages. Other notes: This occurs on random files at random times. This problem cannot be replicated on the Windows 7 source machine when copying from the HD to a different location on its local disk chkdsk /f was run and found no errors. chkdsk /f/r has the delayed write issue. drive was set to quick removal. Setting to performance in device manager yielded same result I am not writing anything to the USB external drive, so I am not sure why there is even a delayed write error (writing file access times?) local Windows XP was chkdsk'd without problems Windows XP machine has no problems with other USB HD's Various USB ports were attempted Rebooting did not help Occurs with SyncToy as well as windows explorer SMART status is good on both local drive and the external one Lack of gaming is making me cranky

    Read the article

  • NMap route determination on Windows 7 x64

    - by user30772
    C:\Windows\system32>nmap --iflist Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 06:51 Central Daylight Time ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) fe80::797f:b9b6:3ee0:27b8/64 ethernet down 1500 5C:AC:4C:E9:2D:46 eth0 (eth0) 169.254.39.184/4 ethernet down 1500 5C:AC:4C:E9:2D:46 eth1 (eth1) fe80::5c02:7e48:8fbe:c7c9/64 ethernet down 1500 00:FF:3F:7C:7C:2B eth1 (eth1) 169.254.199.201/4 ethernet down 1500 00:FF:3F:7C:7C:2B eth2 (eth2) fe80::74e4:1ab7:1b7d:a0d0/64 ethernet up 1500 14:FE:B5:BA:8A:C3 eth2 (eth2) 10.0.0.0.253/24 ethernet up 1500 14:FE:B5:BA:8A:C3 eth3 (eth3) fe80::b03e:ddf5:bb5c:5f76/64 ethernet up 1500 00:50:56:C0:00:01 eth3 (eth3) 169.254.95.118/16 ethernet up 1500 00:50:56:C0:00:01 eth4 (eth4) fe80::b175:831d:e60:27b/64 ethernet up 1500 00:50:56:C0:00:08 eth4 (eth4) 192.168.153.1/24 ethernet up 1500 00:50:56:C0:00:08 lo0 (lo0) ::1/128 loopback up -1 lo0 (lo0) 127.0.0.1/8 loopback up -1 tun0 (tun0) fe80::100:7f:fffe/64 point2point down 1280 tun1 (tun1) (null)/0 point2point down 1280 tun2 (tun2) fe80::5efe:a9fe:5f76/128 point2point down 1280 tun3 (tun3) (null)/0 point2point down 1280 tun4 (tun4) fe80::5efe:c0a8:9901/128 point2point down 1280 tun5 (tun5) fe80::5efe:ac14:fd/128 point2point down 1280 DEV WINDEVICE eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} lo0 <none> lo0 <none> tun0 <none> tun1 <none> tun2 <none> tun3 <none> tun4 <none> tun5 <none> **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 JMeterX - I worded that way in hopes of raising answer efficnecy, but that probably wasnt the smartest choice. IMHO the problem (could be a symptom) is that nmap retardedly chooses eth0 as the gateway interface for any and all networks. Here's the result: C:\Windows\system32>nmap 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:43 Central Daylight Time Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 0.95 seconds C:\Windows\system32>nmap -e eth2 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:44 Central Daylight Time Nmap scan report for esxy5.dionne.net (10.0.0.55) Host is up (0.00070s latency). Not shown: 991 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 427/tcp open svrloc 443/tcp open https 902/tcp open iss-realsecure 5988/tcp closed wbem-http 5989/tcp open wbem-https 8000/tcp open http-alt 8100/tcp open xprint-server MAC Address: 00:1F:29:59:C7:03 (Hewlett-Packard Company) Nmap done: 1 IP address (1 host up) scanned in 5.29 seconds Just to be clear, this is what makes absolutly no sense to me whatsoever. For reference, I've included similar info from an Ubuntu (that works normally) vm on the affected host below. Jacked Windows 7 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 Working Ubuntu VM root@ubuntu:~# nmap --iflist Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MAC lo (lo) 127.0.0.1/8 loopback up eth0 (eth0) 172.20.0.89/24 ethernet up 00:0C:29:0A:C9:35 eth1 (eth1) 192.168.225.128/24 ethernet up 00:0C:29:0A:C9:3F eth2 (eth2) 192.168.150.128/24 ethernet up 00:0C:29:0A:C9:49 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.225.0/0 eth1 192.168.150.0/0 eth2 172.20.0.0/0 eth0 169.254.0.0/0 eth0 0.0.0.0/0 eth0 172.20.0.1 root@ubuntu:~# nmap esxy2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT Nmap scan report for esxy2 (172.20.0.52) Host is up (0.00036s latency). rDNS record for 172.20.0.52: esxy2.dionne.net Not shown: 994 filtered ports PORT STATE SERVICE 80/tcp open http 427/tcp closed svrloc 443/tcp open https 902/tcp closed iss-realsecure 8000/tcp open http-alt 8100/tcp open unknown MAC Address: 00:04:23:B1:FA:6A (Intel) Nmap done: 1 IP address (1 host up) scanned in 4.76 seconds

    Read the article

  • How to address a recurring low temperature error seen at every boot-up?

    - by GregC
    After updating to latest controller firmware, I started receiving the following error messages: LSI 2208 ROC: Temperature sensor below error threshold on enclosure 1 Sensors 5 thru 7 Is this something I should worry about, or is it a Red Herring? Details: I have a Sans Digital NexentaSTOR 24-disk JBOD enclosure connected to LSI 9286-8e RAID-on-Chip controller with two SAS cables. Seagate ES.2 3TB SAS hard drives populate every bay in the enclosure.

    Read the article

  • Cannot copy files from external hard drive to desktop hard drive in Window 7

    - by Mohammad Reza Selim
    I'm trying to copy some old files from one of my external hard-drives to the hard drive of my desktop PC. Some files can not be copied but giving the error like 'Cannot read from source file or disk'. Those files are videos files (.DAT, .VOB, .MPG) and I watched them all the way through with no issues so the files aren't corrupted. I'm running Windows 7, with admin permissions. Could any one let me know the reason and a solution?

    Read the article

  • Windows Home Server backup recovery missing driver for USB Device

    - by Pat James
    I'm doing a backup recovery of a Windows 7 PC from the backup on Windows Home Server. I've done this before and am accustomed to the prompt to load drivers for devices such as the NIC from a USB flash drive, which I have all loaded up with the drivers from the special folder in the WHS backup repository for this PC. My problem on this PC is that one of the drivers the recovery CD complains is missing is "USB Device", and it fails to find the drivers when I click the button to scan for and install drivers. So it seems it can't access the USB flash drive to load the other drivers. Any suggestions? I think my next step is to pull a DVD drive from another system and plug it in with a CD burned with the device drivers.

    Read the article

  • Help installing fedora13 from DvD?

    - by user38008
    I have windows xp on my dell but I lost the drivers disk so I want to install linux Fedora 13 instead and wipe the windows xp. I burned the iso to a dvd and loaded up the live session user and used "Install to harddrive" but when I get to the partitioning window there is no harddrives to install to so I cant overwrite the windows drive (/C:).. Help?

    Read the article

  • Practically expected transfer rates for sdhc class 6

    - by bobobobo
    I went and bought an expensive SanDisk Extreme III SDHC 8GB class 6 chip. However when I dump data from the card to the machine via USB 2.0 cable, its only getting 5.0 MB/second maximum according to Windows 7 disk explorer. It still can take up to 20 minutes to dump the card when its near full. This is so far below the rated 20MB/s transfer speed I can't believe it. Is this normal or might I have a defective chip?

    Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >