Search Results

Search found 5793 results on 232 pages for 'ftp sync'.

Page 218/232 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

• How and why do I set up a C# build machine?

  - by mmr

  Hi all, I'm working with a small (4 person) development team on a C# project. I've proposed setting up a build machine which will do nightly builds and tests of the project, because I understand that this is a Good Thing. Trouble is, we don't have a whole lot of budget here, so I have to justify the expense to the powers that be. So I want to know: What kind of tools/licenses will I need? Right now, we use Visual Studio and Smart Assembly to build, and Perforce for source control. Will I need something else, or is there an equivalent of a cron job for running automated scripts? What, exactly, will this get me, other than an indication of a broken build? Should I set up test projects in this solution (sln file) that will be run by these scripts, so I can have particular functions tested? We have, at the moment, two such tests, because we haven't had the time (or frankly, the experience) to make good unit tests. What kind of hardware will I need for this? Once a build has been finished and tested, is it a common practice to put that build up on an ftp site or have some other way for internal access? The idea is that this machine makes the build, and we all go to it, but can make debug builds if we have to. How often should we make this kind of build? How is space managed? If we make nightly builds, should we keep around all the old builds, or start to ditch them after about a week or so? Is there anything else I'm not seeing here? I realize that this is a very large topic, and I'm just starting out. I couldn't find a duplicate of this question here, and if there's a book out there I should just get, please let me know. EDIT: I finally got it to work! Hudson is completely fantastic, and FxCop is showing that some features we thought were implemented were actually incomplete. We also had to change the installer type from Old-And-Busted vdproj to New Hotness WiX. Basically, for those who are paying attention, if you can run your build from the command line, then you can put it into hudson. Making the build run from the command line via MSBuild is a useful exercise in itself, because it forces your tools to be current.

  Read the article

• Tools to Help out with

  - by peter

  I am developing a C# .NET application. In the app.config file I add trace logging as shown, <?xml version="1.0" encoding="UTF-8" ?> <configuration> <system.diagnostics> <trace autoflush="true" /> <sources> <source name="System.Net.Sockets" maxdatasize="1024"> <listeners> <add name="MyTraceFile"/> </listeners> </source> </sources> <sharedListeners> <add name="MyTraceFile" type="System.Diagnostics.TextWriterTraceListener" initializeData="System.Net.trace.log" /> </sharedListeners> <switches> <add name="System.Net" value="Verbose" /> </switches> </system.diagnostics> </configuration> Are there any good tools around to analyse the log file that is output? The output looks like this, System.Net.Sockets Verbose: 0 : [5900] Data from Socket#8764489::Send DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000000 : 4D 49 4D 45 2D 56 65 72-73 69 6F 6E 3A 20 31 2E : MIME-Version: 1. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000060 : 65 3A 20 37 20 41 70 72-20 32 30 31 30 20 31 35 : e: 7 Apr 2010 15 DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000070 : 3A 32 32 3A 34 30 20 2B-31 32 30 30 0D 0A 53 75 : :22:40 +1200..Su DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000080 : 62 6A 65 63 74 3A 20 5B-45 72 72 6F 72 5D 20 45 : bject: [Error] E DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000090 : 78 63 65 70 74 69 6F 6E-20 69 6E 20 53 79 6E 63 : xception in Sync DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000A0 : 53 65 72 76 69 63 65 20-28 32 30 30 38 2E 30 2E : Service (2008.0. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000B0 : 33 30 34 2E 31 32 33 34-32 29 0D 0A 43 6F 6E 74 : 304.12342)..Cont DateTime=2010-04-07T03:22:40.1067012Z Is there anything that can take the output shown above (my output is a text file 100mb in size), group together packets, and help out with finding particular issues I would like to hear about it. Thanks.

  Read the article

• The best way to separate admin functionality from a public site?

  - by AndrewO

  I'm working on a site that's grown both in terms of user-base and functionality to the point where it's becoming evident that some of the admin tasks should be separate from the public website. I was wondering what the best way to do this would be. For example, the site has a large social component to it, and a public sales interface. But at the same time, there's back office tasks, bulk upload processing, dashboards (with long running queries), and customer relations tools in the admin section that I would like to not be effected by spikes in public traffic (or effect the public-facing response time). The site is running on a fairly standard Rails/MySQL/Linux stack, but I think this is more of an architecture problem than an implementation one: mainly, how does one keep the data and business logic in sync between these different applications? Some strategies that I'm evaluating: 1) Create a slave database of the public facing database on another machine. Extract out all of the model and library code so that it can be shared between the applications. Create new controllers and views for the admin interfaces. I have limited experience with replication and am not even sure that it's supposed to be used this way (most of the time I've seen it, it's been for scaling out the read capabilities of the same application, rather than having multiple different ones). I'm also worried about the potential for latency issues if the slave is not on the same network. 2) Create new more task/department-specific applications and use a message oriented middleware to integrate them. I read Enterprise Integration Patterns awhile back and they seemed to advocate this for distributed systems. (Alternatively, in some cases the basic Rails-style RESTful API functionality might suffice.) But, I have nightmares about data synchronization issues and the massive re-architecting that this would entail. 3) Some mixture of the two. For example, the only public information necessary for some of the back office tasks is a read-only completion time or status. Would it make sense to have that on a completely separate system and send the data to public? Meanwhile, the user/group admin functionality would be run on a separate system sharing the database? The downside is, this seems to keep many of the concerns I have with the first two, especially the re-architecting. I'm sure the answers are going to be highly dependent on a site's specific needs, but I'd love to hear success (or failure) stories.

  Read the article

• Open Cl.I just need to convert the code to using two work items in the for loop .Currentlly it uses one

  - by user1660282

  spmv_csr_scalar_kernel(const int num_rows , const int * ptr , const int * indices , const float * data , const float * x, float * y) { int row = get_global_id(0); if(row < num_rows) { float dot = 0; int row_start = ptr[row]; int row_end = ptr[row+1]; for (int jj = row_start; jj < row_end; jj++) { dot += data[jj] * x[indices[jj]]; } y[row] += dot; } } Above is the Open Cl code for multiplying a sparse matrix in CSR format with a Column vector.It uses one global work item per for loop.Can anybody help me in using two work items in each for loop.I am new to open cl and get a lot of issues if I modify even the smallest thing.Please help me.This a part of my project.I made it this parallel but I wanna make it more parallel.Please help me if you can.plzzzz A single work item executes the for loop from row_start to row_end.I want that this row or for loop is further divided into two parts each executed by a single work item.How do I go on accomplishing that? This is what I could come up with but its returning the wrong output.plzz help __kernel void mykernel(__global int* colvector,__global int* val,__global int* result,__global int* index,__global int* rowptr,__global int* sync) { __global int vals[8]={0,0,0,0,0,0,0,0}; for(int i=0;i<4;i++) { result[i]=0; } barrier(CLK_GLOBAL_MEM_FENCE); int thread_id=get_global_id(0); int warp_id=thread_id/2; int lane=(thread_id)&1; int row=warp_id; if(row<4) { int row_start = rowptr[row]; int row_end = rowptr[row+1]; vals[thread_id]=0; for (int i = row_start+lane; i<row_end; i+=2) { vals[thread_id]+=val[i]*colvector[index[i]]; } vals[thread_id]+=vals[thread_id+1]; if(lane==0){ result[row] += vals[thread_id]; } } }

  Read the article

• How come my South migrations doesn't work for Django?

  - by TIMEX

  First, I create my database. create database mydb; I add "south" to installed Apps. Then, I go to this tutorial: http://south.aeracode.org/docs/tutorial/part1.html The tutorial tells me to do this: $ py manage.py schemamigration wall --initial >>> Created 0001_initial.py. You can now apply this migration with: ./manage.py migrate wall Great, now I migrate. $ py manage.py migrate wall But it gives me this error... django.db.utils.DatabaseError: (1146, "Table 'fable.south_migrationhistory' doesn't exist") So I use Google (which never works. hence my 870 questions asked on Stackoverflow), and I get this page: http://groups.google.com/group/south-users/browse_thread/thread/d4c83f821dd2ca1c Alright, so I follow that instructions >> Drop database mydb; >> Create database mydb; $ rm -rf ./wall/migrations $ py manage.py syncdb But when I run syncdb, Django creates a bunch of tables. Yes, it creates the south_migrationhistory table, but it also creates my app's tables. Synced: > django.contrib.admin > django.contrib.auth > django.contrib.contenttypes > django.contrib.sessions > django.contrib.sites > django.contrib.messages > south > fable.notification > pagination > timezones > fable.wall > mediasync > staticfiles > debug_toolbar Not synced (use migrations): - (use ./manage.py migrate to migrate these) Cool....now it tells me to migrate these. So, I do this: $ py manage.py migrate wall The app 'wall' does not appear to use migrations. Alright, so fine. I'll add wall to initial migrations. $ py manage.py schemamigration wall --initial Then I migrate: $ py manage.py migrate wall You know what? It gives me this BS: _mysql_exceptions.OperationalError: (1050, "Table 'wall_content' already exists") Sorry, this is really pissing me off. Can someone help ? thanks. How do I get South to work and sync correctly with everything?

  Read the article

• Why is my namespace not recognized in Visual Studio / xaml

  - by msfanboy

  Hello, these are my 2 classes a Attachable Property SelectedItems: code is from here: http://stackoverflow.com/questions/1297643/sync-selecteditems-in-a-muliselect-listbox-with-a-collection-in-viewmodel The namespace TBM.Helper is for sure proper as it works for other classes too. The namespace reference is also in the xaml file: xmlns:Helper="clr_namespace:TBM.Helper" But <ListBox Helper:SelectedItems.Items="{Binding SelectedItems}" ... does not work because = The property 'SelectedItems.Items' does not exist in XML namespace 'clr_namespace:TBM.Helper'. The attachable property 'Items' was not found in type 'SelectedItems What do I have to change ? using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows.Controls; using System.Collections; using System.Windows; namespace TBM.Helper { public static class SelectedItems : DependencyObject { private static readonly DependencyProperty SelectedItemsBehaviorProperty = DependencyProperty.RegisterAttached( "SelectedItemsBehavior", typeof(SelectedItemsBehavior), typeof(ListBox), null); public static readonly DependencyProperty ItemsProperty = DependencyProperty.RegisterAttached( "Items", typeof(IList), typeof(SelectedItems), new PropertyMetadata(null, ItemsPropertyChanged)); public static void SetItems(ListBox listBox, IList list) { listBox.SetValue(ItemsProperty, list); } public static IList GetItems(ListBox listBox) { return listBox.GetValue(ItemsProperty) as IList; } private static void ItemsPropertyChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { var target = d as ListBox; if (target != null) { GetOrCreateBehavior(target, e.NewValue as IList); } } private static SelectedItemsBehavior GetOrCreateBehavior(ListBox target, IList list) { var behavior = target.GetValue(SelectedItemsBehaviorProperty) as SelectedItemsBehavior; if (behavior == null) { behavior = new SelectedItemsBehavior(target, list); target.SetValue(SelectedItemsBehaviorProperty, behavior); } return behavior; } } } using System.Windows; using System.Windows.Controls; using System.Collections; namespace TBM.Helper { public class SelectedItemsBehavior { private readonly ListBox _listBox; private readonly IList _boundList; public SelectedItemsBehavior(ListBox listBox, IList boundList) { _boundList = boundList; _listBox = listBox; SetSelectedItems(); _listBox.SelectionChanged += OnSelectionChanged; _listBox.DataContextChanged += OnDataContextChanged; } private void SetSelectedItems() { _listBox.SelectedItems.Clear(); foreach (object item in _boundList) { // References in _boundList might not be the same as in _listBox.Items int i = _listBox.Items.IndexOf(item); if (i >= 0) _listBox.SelectedItems.Add(_listBox.Items[i]); } } private void OnDataContextChanged(object sender, DependencyPropertyChangedEventArgs e) { SetSelectedItems(); } private void OnSelectionChanged(object sender, SelectionChangedEventArgs e) { _boundList.Clear(); foreach (var item in _listBox.SelectedItems) _boundList.Add(item); } } }

  Read the article

• Anybody Know of any Tools to help Analysing .NET Trace Log Files?

  - by peter

  I am developing a C# .NET application. In the app.config file I add trace logging as shown, <?xml version="1.0" encoding="UTF-8" ?> <configuration> <system.diagnostics> <trace autoflush="true" /> <sources> <source name="System.Net.Sockets" maxdatasize="1024"> <listeners> <add name="MyTraceFile"/> </listeners> </source> </sources> <sharedListeners> <add name="MyTraceFile" type="System.Diagnostics.TextWriterTraceListener" initializeData="System.Net.trace.log" /> </sharedListeners> <switches> <add name="System.Net" value="Verbose" /> </switches> </system.diagnostics> </configuration> Are there any good tools around to analyse the log file that is output? The output looks like this, System.Net.Sockets Verbose: 0 : [5900] Data from Socket#8764489::Send DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000000 : 4D 49 4D 45 2D 56 65 72-73 69 6F 6E 3A 20 31 2E : MIME-Version: 1. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000060 : 65 3A 20 37 20 41 70 72-20 32 30 31 30 20 31 35 : e: 7 Apr 2010 15 DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000070 : 3A 32 32 3A 34 30 20 2B-31 32 30 30 0D 0A 53 75 : :22:40 +1200..Su DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000080 : 62 6A 65 63 74 3A 20 5B-45 72 72 6F 72 5D 20 45 : bject: [Error] E DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000090 : 78 63 65 70 74 69 6F 6E-20 69 6E 20 53 79 6E 63 : xception in Sync DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000A0 : 53 65 72 76 69 63 65 20-28 32 30 30 38 2E 30 2E : Service (2008.0. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000B0 : 33 30 34 2E 31 32 33 34-32 29 0D 0A 43 6F 6E 74 : 304.12342)..Cont DateTime=2010-04-07T03:22:40.1067012Z Is there anything that can take the output shown above (my output is a text file 100mb in size), group together packets, and help out with finding particular issues I would like to hear about it. Thanks.

  Read the article

• Sqlite issues with HTC Desire HD

  - by Greg

  Recently I have been getting a lot of complaints about the HTC Desire series and it failing while invoking sql statements. I have received reports from users with log snapshots that contain the following. I/Database( 2348): sqlite returned: error code = 8, msg = statement aborts at 1: [pragma journal_mode = WAL;] E/Database( 2348): sqlite3_exec to set journal_mode of /data/data/my.app.package/files/localized_db_en_uk-1.sqlite to WAL failed followed by my app basically burning in flames because the call to open the database results in a serious runtime error that manifests itself as the cursor being left open. There shouldn't be a cursor at this point as we are trying to open it. This only occurs with the HTC Desire HD and Z. My code basically does the following (changed a little to isolate the problem area). SQLiteDatabase db; String dbName; public SQLiteDatabase loadDb(Context context) throws IOException{ //Close any old db handle if (db != null && db.isOpen()) { db.close(); } // The name of the database to use from the bundled assets. String dbAsset = "/asset_dir/"+dbName+".sqlite"; InputStream myInput = context.getAssets().open(dbAsset, Context.MODE_PRIVATE); // Create a file in the app's file directory since sqlite requires a path // Not ideal but we will copy the file out of our bundled assets and open it // it in another location. FileOutputStream myOutput = context.openFileOutput(dbName, Context.MODE_PRIVATE); byte[] buffer = new byte[1024]; int length; while ((length = myInput.read(buffer)) > 0) { myOutput.write(buffer, 0, length); } // Close the streams myOutput.flush(); // Guarantee Write! myOutput.getFD().sync(); myOutput.close(); myInput.close(); // Not grab the newly written file File fileObj = context.getFileStreamPath(dbName); // and open the database return db = SQLiteDatabase.openDatabase(fileObj.getAbsolutePath(), null, SQLiteDatabase.OPEN_READONLY | SQLiteDatabase.NO_LOCALIZED_COLLATORS); } Sadly this phone is only available in the UK and I don't have one in my inventory. I am only getting reports of this type from the HTC Desire series. I don't know what changed as this code has been working without any problem. Is there something I am missing?

  Read the article

• assistance required, hangman game.

  - by Phillip Gibson

  I am making a hangman game and am having trouble with part of it. I have selected a random word from a file, but I want to display the word as a series of undersocres __ and then match the letter chosen to a position in the undersocres. Can anyone help me? cout <<"1. Select to play the game\n"; cout <<"2. Ask for help\n"; cout <<"3. Select to quit the game\n"; cout << "Enter a selection: "; int number; cin >> number; while(number < 1 || number > 3 || cin.fail()) { if(cin.fail()) { cin.sync(); cin.clear(); cout << "You have not entered a number, please enter a menu selection between 1 and 3\n"; cin >> number; } else { cout << "Your selection must be between 1 and 3!\n"; cin >> number; } } switch (number) { case 1: { string word; string name; cout << " Whats your name? "; cin >> name; Player player(); ifstream FileReader; FileReader.open("words.txt"); if(!FileReader.is_open()) cout << "Error"; //this is for the random selection of words srand(time(0)); int randnum = rand()%10+1; for(int counter = 0; counter < randnum; counter++) { getline(FileReader, word, '\n'); } cout << "my word: " << word << "\n"; // get length of word int length; //create for loop for(int i = 0; i < length; i++) cout << "_"; //_ _ _ _ _ SetCursorPos(2,10); FileReader.close(); break;

  Read the article

• Abnormally disconnected TCP sockets and write timeout

  - by James

  Hello I will try to explain the problem in shortest possible words. I am using c++ builder 2010. I am using TIdTCPServer and sending voice packets to a list of connected clients. Everything works ok untill any client is disconnected abnormally, For example power failure etc. I can reproduce similar disconnect by cutting the ethernet connection of a connected client. So now we have a disconnected socket but as you know it is not yet detected at server side so server will continue to try to send data to that client too. But when server try to write data to that disconnected client ...... Write() or WriteLn() HANGS there in trying to write, It is like it is wating for somekind of Write timeout. This hangs the hole packet distribution process as a result creating a lag in data transmission to all other clients. After few seconds "Socket Connection Closed" Exception is raised and data flow continues. Here is the code try { EnterCriticalSection(&SlotListenersCriticalSection); for(int i=0;i<SlotListeners->Count;i++) { try { //Here the process will HANG for several seconds on a disconnected socket ((TIdContext*) SlotListeners->Objects[i])->Connection->IOHandler->WriteLn("Some DATA"); }catch(Exception &e) { SlotListeners->Delete(i); } } }__finally { LeaveCriticalSection(&SlotListenersCriticalSection); } Ok i already have a keep alive mechanism which disconnect the socket after n seconds of inactivity. But as you can imagine, still this mechnism cant sync exactly with this braodcasting loop because this braodcasting loop is running almost all the time. So is there any Write timeouts i can specify may be through iohandler or something ? I have seen many many threads about "Detecting disconnected tcp socket" but my problem is little different, i need to avoid that hangup for few seconds during the write attempt. So is there any solution ? Or should i consider using some different mechanism for such data broadcasting for example the broadcasting loop put the data packet in some kind of FIFO buffer and client threads continuously check for available data and pick and deliver it to themselves ? This way if one thread hangs it will not stop/delay the over all distribution thread. Any ideas please ? Thanks for your time and help. Regards Jams

  Read the article

• Haskell data serialization of some data implementing a common type class

  - by Evan

  Let's start with the following data A = A String deriving Show data B = B String deriving Show class X a where spooge :: a -> Q [ Some implementations of X for A and B ] Now let's say we have custom implementations of show and read, named show' and read' respectively which utilize Show as a serialization mechanism. I want show' and read' to have types show' :: X a => a -> String read' :: X a => String -> a So I can do things like f :: String -> [Q] f d = map (\x -> spooge $ read' x) d Where data could have been [show' (A "foo"), show' (B "bar")] In summary, I wanna serialize stuff of various types which share a common typeclass so I can call their separate implementations on the deserialized stuff automatically. Now, I realize you could write some template haskell which would generate a wrapper type, like data XWrap = AWrap A | BWrap B deriving (Show) and serialize the wrapped type which would guarantee that the type info would be stored with it, and that we'd be able to get ourselves back at least an XWrap... but is there a better way using haskell ninja-ery? EDIT Okay I need to be more application specific. This is an API. Users will define their As, and Bs and fs as they see fit. I don't ever want them hacking through the rest of the code updating their XWraps, or switches or anything. The most i'm willing to compromise is one list somewhere of all the A, B, etc. in some format. Why? Here's the application. A is "Download a file from an FTP server." B is "convert from flac to mp3". A contains username, password, port, etc. information. B contains file path information. A and B are Xs, and Xs shall be called "Tickets." Q is IO (). Spooge is runTicket. I want to read the tickets off into their relevant data types and then write generic code that will runTicket on the stuff read' from the stuff on disk. At some point I have to jam type information into the serialized data.

  Read the article

• How do I create a safe local development environment?

  - by docgnome

  I'm currently doing web development with another developer on a centralized development server. In the past this has worked alright, as we have two separate projects we are working on and rarely conflict. Now, however, we are adding a third (possible) developer into the mix. This is clearly going to create problems with other developers changes affecting my work and vice versa. To solve this problem, I'm thinking the best solution would be to create a virtual machine to distribute between the developers for local use. The problem I have is when it comes to the database. Given that we all develop on laptops, simply keeping a local copy of the live data is plain stupid. I've considered sanitizing the data, but I can't really figure out how to replace the real data, with data that would be representative of what people actually enter with out repeating the same information over and over again, e.g. everyone's address becomes 123 Testing Lane, Test Town, WA, 99999 or something. Is this really something to be concerned about? Are there tools to help with this sort of thing? I'm using MySQL. Ideally, if I sanitized the db it should be done from a script that I can run regularly. If I do this I'd also need a way to reduce the size of the db itself. (I figure I could select all the records created after x and whack them and all the records in corresponding tables out so that isn't really a big deal.) The second solution I've thought of is to encrypt the hard drive of the vm, but I'm unsure of how practical this is in terms of speed and also in the event of a lost/stolen laptop. If I do this, should the vm hard drive file itself be encrypted or should it be encrypted in the vm? (I'm assuming the latter as it would be portable and doesn't require the devs to have any sort of encryption capability on their OS of choice.) The third is to create a copy of the database for each developer on our development server that they are then responsible to keep the schema in sync with the canonical db by means of migration scripts or what have you. This solution seems to be the simplest but doesn't really scale as more developers are added. How do you deal with this problem?

  Read the article

• How to reconcile my support of open-source software and need to feed and house myself?

  - by Guzba

  I have a bit of a dilemma and wanted to get some other developers' opinions on it and maybe some guidance. So I have created a 2D game for Android from the ground up, learning and re factoring as I went along. I did it for the experience, and have been proud of the results. I released it for free as ad supported with AdMob not really expecting much out of it, but curious to see what would happen. Its been a few of months now since release, and it has become very popular (250k downloads!). Additionally, the ad revenue is great and is driving me to make more good games and even allowing me to work less so that I can focus on my own works. When I originally began working on the game, I was pretty new to concurrency and completely new to Android (had Java experience though). The standard advice I got for starting an Android game was to look at the sample games from Google (Snake, Lunar Lander, ...) so I did. In my opinion, these Android sample games from Google are decent to see in general what your code should look like, but not actually all that great to follow. This is because some of their features don't work (saving game state), the concurrency is both unexplained and cumbersome (there is no real separation between the game thread and the UI thread since they sync lock each other out all the time and the UI thread runs game thread code). This made it difficult for me as a newbie to concurrency to understand how it was organized and what was really running what code. Here is my dilemma: After spending this past few months slowly improving my code, I feel that it could be very beneficial to developers who are in the same position that I was in when I started. (Since it is not a complex game, but clearly coded in my opinion.) I want to open up the source so that others can learn from it but don't want to lose my ad revenue stream, which, if I did open the source, I fear I would when people released versions with the ad stripped, or minor tweaks that would fragment my audience, etc. I am a CS undergrad major in college and this money is giving me the freedom to work less at summer job, thus giving me the time and will to work on more of my own projects and improving my own skills while still paying the bills. So what do I do? Open the source at personal sacrifice for the greater good, or keep it closed and be a sort of hypocritical supporter of open source?

  Read the article

• Is MySQL Replication Appropriate in this case?

  - by MJB

  I have a series of databases, each of which is basically standalone. It initially seemed like I needed a replication solution, but the more I researched it, the more it felt like replication was overkill and not useful anyway. I have not done MySQL replication before, so I have been reading up on the online docs, googling, and searching SO for relevant questions, but I can't find a scenario quite like mine. Here is a brief description of my issue: The various databases almost never have a live connection to each other. They need to be able to "sync" by copying files to a thumb drive and then moving them to the proper destination. It is OK for the data to not match exactly, but they should have the same parent-child relationships. That is, if a generated key differs between databases, no big deal. But the visible data must match. Timing is not critical. Updates can be done a week later, or even a month later, as long as they are done eventually. Updates cannot be guaranteed to be in the proper order, or in any order for that matter. They will be in order from each database; just not between databases. Rather than a set of master-slave relationships, it is more like a central database (R/W) and multiple remote databases (also R/W). I won't know how many remote databases I have until they are created. And the central DB won't know that a database exists until data arrives from it. (To me, this implies I cannot use the method of giving each its own unique identity range to guarantee uniqueness in the central database.) It appears to me that the bottom line is that I don't want "replication" so much as I want "awareness". I want the central database to know what happened in the remote databases, but there is no time requirement. I want the remote databases to be aware of the central database, but they don't need to know about each other. WTH is my question? It is this: Does this scenario sound like any of the typical replication scenarios, or does it sound like I have to roll my own? Perhaps #7 above is the only one that matters, and given that requirement, out-of-the-box replication is impossible. EDIT: I realize that this question might be more suited to ServerFault. I also searched there and found no answers to my questions. And based on the replication questions I did find both on SO and SF, it seemed that the decision was 50-50 over where to put my question. Sorry if I guessed wrong.

  Read the article

• nodejs async.waterfall method

  - by user1513388

  Update 2 Complete code listing var request = require('request'); var cache = require('memory-cache'); var async = require('async'); var server = '172.16.221.190' var user = 'admin' var password ='Passw0rd' var dn ='\\VE\\Policy\\Objects' var jsonpayload = {"Username": user, "Password": password} async.waterfall([ //Get the API Key function(callback){ request.post({uri: 'http://' + server +'/sdk/authorize/', json: jsonpayload, headers: {'content_type': 'application/json'} }, function (e, r, body) { callback(null, body.APIKey); }) }, //List the credential objects function(apikey, callback){ var jsonpayload2 = {"ObjectDN": dn, "Recursive": true} request.post({uri: 'http://' + server +'/sdk/Config/enumerate?apikey=' + apikey, json: jsonpayload2, headers: {'content_type': 'application/json'} }, function (e, r, body) { var dns = []; for (var i = 0; i < body.Objects.length; i++) { dns.push({'name': body.Objects[i].Name, 'dn': body.Objects[i].DN}) } callback(null, dns, apikey); }) }, function(dns, apikey, callback){ // console.log(dns) var cb = []; for (var i = 0; i < dns.length; i++) { //Retrieve the credential var jsonpayload3 = {"CredentialPath": dns[i].dn, "Pattern": null, "Recursive": false} console.log(dns[i].dn) request.post({uri: 'http://' + server +'/sdk/credentials/retrieve?apikey=' + apikey, json: jsonpayload3, headers: {'content_type': 'application/json'} }, function (e, r, body) { // console.log(body) cb.push({'cl': body.Classname}) callback(null, cb, apikey); console.log(cb) }); } } ], function (err, result) { // console.log(result) // result now equals 'done' }); Update: I'm building a small application that needs to make multiple HTTP calls to a an external API and amalgamates the results into a single object or array. e.g. Connect to endpoint and get auth key - pass auth key to step 2 Connect to endpoint using auth key and get JSON results - create an object containing summary results and pass to step 3. Iterate over passed object summary results and call API for each item in the object to get detailed information for each summary line Create a single JSON data structure that contains the summary and detail information. The original question below outlines what I've tried so far! Original Question: Will the async.waterfall method support multiple callbacks? i.e. Iterate over an array thats passed from a previous item in the chain, then invoke multiple http requests each of which would have their own callbacks. e.g, sync.waterfall([ function(dns, key, callback){ var cb = []; for (var i = 0; i < dns.length; i++) { //Retrieve the credential var jsonpayload3 = {"Cred": dns[i].DN, "Pattern": null, "Recursive": false} console.log(dns[i].DN) request.post({uri: 'http://' + vedserver +'/api/cred/retrieve?apikey=' + key, json: jsonpayload3, headers: {'content_type': 'application/json'} }, function (e, r, body) { console.log(body) cb.push({'cl': body.Classname}) callback(null, cb, key); }); } }

  Read the article

• jquery in ajax loaded content

  - by Kim Gysen

  My application is supposed to be a single page application and I have the following code that works fine: home.php: <div id="container"> </div> accordion.php: //Click functions: load content $('#parents').click(function(){ //Load parent in container $('#container').load('http://www.blabla.com/entities/parents/parents.php'); }); parents.php: <div class="entity_wrapper"> Some divs and selectors </div> <script type="text/javascript"> $(document).ready(function(){ //Some jQuery / javascript }); </script> So the content loads fine, while the scripts dynamically loaded execute fine as well. I apply this system repetitively and it continues to work smoothly. I've seen that there are a lot of frameworks available on SPA's (such as backbone.js) but I don't understand why I need them if this works fine. From the backbone.js website: When working on a web application that involves a lot of JavaScript, one of the first things you learn is to stop tying your data to the DOM. It's all too easy to create JavaScript applications that end up as tangled piles of jQuery selectors and callbacks, all trying frantically to keep data in sync between the HTML UI, your JavaScript logic, and the database on your server. For rich client-side applications, a more structured approach is often helpful. Well, I totally don't have the feeling that I'm going through the stuff they mention. Adding the javascript per page works really well for me. They are html containers with clear scope and the javascript is just related to that part. More over, the front end doesn't do that much, most of the logic is managed based on Ajax calls to external PHP scripts. Sometimes the js can be a bit more extended for some functionalities, but all just loads as smooth in less than a second. If you think that this is bad coding, please tell me why I cannot do this and more importantly, what is the alternative I should apply. At the moment, I really don't see a reason on why I would change this approach as it just works too well. I'm kinda stuck on this question because it just worries me sick as it seems to easy to be true. Why would people go through hard times if it would be as easy as this...

  Read the article

• is it possible that a greasemonkey script can work on one computer but not on another?

  - by plastic cloud

  i'm writing an greasemonkey script for somebody else. he is a moderator and i am not. and the script will help him do some moderating things. now the script works for me. as far as it can work for me.(as i am not a mod) but even those things that work for me are not working for him.. i checked his version of greasemonkey plugin and firefox and he is up to date. only thing that's really different is that i'm on a mac and he is pc, but i wouldn't think that would be any problem. this is one of the functions that is not working for him. he does gets the first and third GM_log message. but not the second one ("got some(1) .."). kmmh.trackNames = function(){ GM_log("starting to get names from the first "+kmmh.topAmount+" page(s) from leaderboard."); kmmh.leaderboardlist = []; for (var p=1; p<=(kmmh.topAmount); p++){ var page = "http://www.somegamesite.com/leaderboard?page="+ p; var boardHTML = ""; dojo.xhrGet({ url: page, sync: true, load: function(response){ boardHTML = response; GM_log("got some (1) => "+boardHTML.length); }, handleAs: "text" }); GM_log("got some (2) => "+boardHTML.length); //create dummy div and place leaderboard html in there var dummy = dojo.create('div', { innerHTML: boardHTML }); //search through it var searchN = dojo.query('.notcurrent', dummy).forEach(function(node,index){ if(index >= 10){ kmmh.leaderboardlist.push(node.textContent); // add names to array } }); } GM_log("all names from "+ kmmh.topAmount +" page(s) of leaderboard ==> "+ kmmh.leaderboardlist); does anyone have any idea what could be causing this ?? EDIT: i know i had to write according to what he would see on his mod screen. so i asked him to copy paste source of pages and so on. and besides that, this part of the script is not depending on being a mod or not. i got everything else working for him. just this function still doesn't on neither of his pc's.

  Read the article

• ASP.NET MVC Inheriting from ProfileBase

  - by Glen

  I have 2 related issues. I inherited from ProfileBase and I have a couple of properites as such public SomeType PropertyName { get { return (SomeType)base["PropertyName"]; } set { base["PropertyName"] = value; Save(); } } I also have a User class (UserId, UserName, Profile, LastActivityDate) that has 2 additional properties out of the profile that I retrieve in my View to show a list of Users (i.e. @Model.Profile.PropertyName). However, everytime I access a property (from my View) it seems to update the LastActivityDate in the aspnet_Users table because when I show the LastActivityDate as well as the profile properties on my screen the LastActivtyDate is out of sync with the database. Also there is a LastActivityDate property available in my profile which unfortunately is not available and is in fact set to null and throws an exception when accessing it saying the property UserName is null. So the static Create method provided by ProfileBase seems to retrieve the correct profile properties but does not set the base's UserName property even though you pass in a UserName parameter to the Create method. Is this a internal bug? I was kind of hoping if by accessing the property because the LastActivityDate is updated then I could store that value to update my LastActivityDate in my User class before it is rendered to the page. The only way I can think of doing it is: public SomeType PropertyName { get { SomeType result = (SomeType)base["PropertyName"]; OnLastActivityDateChanged(); return result; } set { base["PropertyName"] = value; } } then in my User class: ... public MyProfile() { Profile.LastActivityDateChanged += Profile_LastActivityDateChanged(); } ~MyProfile() { Profile.LastActivityDateChanged -= Profile_LastActivityDateChanged(); } ... void Profile_LastActivityDateChanged(object sender, EventArgs e) { //Run a query to get the latest LastActivityDate this.LastActivityDate = ... } It seems I have to make 1 call to retrieve the full list to my aspnet_Users table then another call for each row just to get the latest activity date. ARGGGGHHH!!! Am I going about this the wrong way! I put an ajax refresh hyperlink next to each User row and when I click it, immediately after loading the page, the value changes. Therefore my suspision is valid that calling a property via the inherited profilebase class updates the value. Is there a workaround? It is a bit miss leading when my page says User Smith has no activity for 4 days then I click my ajax refresh link (or refresh the whole page for that matter) and now it says Smith was active but it was just me meally showing the page that indirectly caused an activity read event.

  Read the article

• Contact form with php-script does not work

  - by elajjas

  I'm new to the forum and I have been trying to find a thread that could be helpful but nothing have been working out so far. I recently uploaded my site via FTP, and it works fine. Except for one thing, my contact form. The contact form is crucial and it is almost the whole point of the website. I don't get any emails "from the form", either in my spam-folder or inbox. Please have a look at the website which is: http://www.adspot.se The contact form is situated on: http://www.adspot.se/contact.html The php script looks like this: <?php if (isset($_REQUEST['email'])) //if "email" is filled out, send email { //send email $name = $_REQUEST['name'] ; $email = $_REQUEST['email'] ; $message = $_REQUEST['message'] ; mail("[email protected]", $name, $message, "From:" . $email); } ?> I've already tried different types of php-scripts, but it still doesn't seem to work. UPDATE: Changed the form code to: <form method="POST" action="email.php"> <div class="row half"> <div class="6u"> <input name="name" placeholder="Name" type="text" class="text" /> </div> <div class="6u"> <input name="email" placeholder="Email" type="text" class="text" /> </div> </div> <div class="row half"> <div class="12u"> <textarea name="message" placeholder="Message"></textarea> </div> </div> <div class="row half"> <div class="12u"> <ul class="action"> <input type="submit" class="action"> </ul> </div> </div> </form> Now it redirects me to www.adspot.se/email.php but still no emails received...

  Read the article

• 'Timeout Expired' error against local SQL Express on only 2 LINQ Methods...

  - by Refracted Paladin

  I am going to sum up my problem first and then offer massive details and what I have already tried. Summary: I have an internal winform app that uses Linq 2 Sql to connect to a local SQL Express database. Each user has there own DB and the DB stay in sync through Merge Replication with a Central DB. All DB's are SQL 2005(sp2or3). We have been using this app for over 5 months now but recently our users are getting a Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. Detailed: The strange part is they get that in two differnt locations(2 differnt LINQ Methods) and only the first time they fire in a given time period(~5mins). One LINQ method is pulling all records that match a FK ID and then Manipulating them to form a Heirarchy View for a TreeView. The second is pulling all records that match a FK ID and dumping them into a DataGridView. The only things I can find in common with the 2 are that the first IS an IEnumerable and the second converts itself from IQueryable - IEnumerable - DataTable... I looked at the query's in Profiler and they 'seemed' normal. They are not very complicated querys. They are only pulling back 10 - 90 records, from one table. Any thoughts, suggestions, hints whatever would be greatly appreciated. I am at my wit's end on this.... public IList<CaseNoteTreeItem> GetTreeViewDataAsList(int personID) { var myContext = MatrixDataContext.Create(); var caseNotesTree = from cn in myContext.tblCaseNotes where cn.PersonID == personID orderby cn.ContactDate descending, cn.InsertDate descending select new CaseNoteTreeItem { CaseNoteID = cn.CaseNoteID, NoteContactDate = Convert.ToDateTime(cn.ContactDate). ToShortDateString(), ParentNoteID = cn.ParentNote, InsertUser = cn.InsertUser, ContactDetailsPreview = cn.ContactDetails.Substring(0, 75) }; return caseNotesTree.ToList<CaseNoteTreeItem>(); } AND THIS ONE public static DataTable GetAllCNotes(int personID) { using (var context = MatrixDataContext.Create()) { var caseNotes = from cn in context.tblCaseNotes where cn.PersonID == personID orderby cn.ContactDate select new { cn.ContactDate, cn.ContactDetails, cn.TimeSpentUnits, cn.IsCaseLog, cn.IsPreEnrollment, cn.PresentAtContact, cn.InsertDate, cn.InsertUser, cn.CaseNoteID, cn.ParentNote }; return caseNotes.ToList().CopyLinqToDataTable(); } }

  Read the article

• Solution Output Directory

  - by L.E.O

  The project that I'm currently working on is being developed by multiple teams where each team is responsible for different part of the project. They all have set up their own C# projects and solutions with configuration settings specific to their own needs. However, now we need to create another, global solution, which will combine and build all projects into the same output directory. The problem that I have encountered though, is that I have found only one way to make all projects build into the same output directory - I need to modify configurations for all of them. That is what we would like to avoid. We would prefer that all these projects had no knowledge about this "global" solution. Each team must retain possibility to work just with their own sub-solution. One possible workaround is to create a special configuration for all projects just for this "global" solution, but that could create extra problems since now you have to constantly sync this configuration settings with the regular one, used by that specific team. Last thing we want to do is to spend hours trying to figure out why something doesn't work when building under global solution just because of some check box that developers have checked in their configuration, but forgot to do so in the global configuration. So, to simplify, we need some sort of output directory setting or post build event that would only be present when building from that global, all-inclusive solution. Is there any way to achieve this without changing something in projects configurations? Update 1: Some extra details I guess I need to mention: We need this global solution to be as close as possible to what the end user gets when he installs our application, since we intend to use it for debugging of the entire application when we need to figure out which part of the application isn't working before sending this bug to the team working on that part. This means that when building under global solution the output directory hierarchy should be the same as it would be in Program Files after installation, so that if, for example, we have Program Files/MyApplication/Addins folder which contains all the addins developed by different teams, we need the global solution to copy the binaries from addins projects and place them in the output directory accordingly. The thing is, the team developing an addin doest necessary know that it is an addin and that it should be placed in that folder, so they cannot change their relative output directory to be build/bin/Debug/Addins.

  Read the article

• PHP-OOP extending two classes?

  - by user1292810

  I am very beginner to OOP and now I am trying to write some PHP class to connect with FTP server. class ftpConnect { private $server; private $user; private $password; private $connection_id; private $connection_correct = false; public function __construct($server, $user = "anonymous", $password = "[email protected]") { $this->server = $server; $this->user = $user; $this->password = $password; $this->connection_id = ftp_connect($this->server); $this->connection_correct = ftp_login($this->connection_id, $this->user, $this->password); if ( (!$this->connection_id) || (!$this->connection_correct) ){ echo "Error! Couldn't connect to $this->server"; var_dump($this->connection_id); var_dump($this->connection_correct); return false; } else { echo "Successfully connected to $this->server, user: $this->user"; $this->connection_correct = true; return true; } } } I reckon that body of the class is insignificant at the moment. Main issue is that I have some problems with understanding OOP idea. I wanted to add sending emails every time, when the code is run. I have downloaded PHPMailer Class and extended my class with it: class ftpConnect extends PHPMailer {...} I have added some variables and methods and everything works as expected to that point. I thought: why not to add storing everything in database. Everytime user runs above code, proper information should be stored in database. I could edit my ftpConnect class and add database connecting to the constructor, and some other methods to updating tables. But database connecting and all that stuff could be used by other classes in the future, so it definitely should be implemented in seperate class. But my "main" ftpConnect class already extends one class and could not extend not a single one more. I have no idea how can I resolve this problem. Maybe my ftpConnect class is to complex and I should somehow divide it into couple smaller classes? Any help is much appreciated.

  Read the article

• SFTP not supported error with PHP & cURL

  - by Bad Programmer

  I followed the advice from this Stack Overflow question thread, but I keep hitting a snag. I am receiving the following error message: Unsupported protocol: sftp Here is my code: $ch = curl_init(); if(!$ch) { $error = curl_error($ch); die("cURL session could not be initiated. ERROR: $error.""); } $fp = fopen($docname, 'r'); if(!$fp) { $error = curl_error($ch); die("$docname could not be read."); } curl_setopt($ch, CURLOPT_URL, "sftp://$user_name:$user_pass@$server:22/$docname"); curl_setopt($ch, CURLOPT_UPLOAD, 1); curl_setopt($ch, CURLOPT_PROTOCOLS, CURLPROTO_SFTP); curl_setopt($ch, CURLOPT_INFILE, $fp); curl_setopt($ch, CURLOPT_INFILESIZE, filesize($docname)); //this is where I get the failure $exec = curl_exec ($ch); if(!$exec) { $error = curl_error($ch); die("File $docname could not be uploaded. ERROR: $error."); } curl_close ($ch); I used the curl_version() function to see my curl information, and found that sftp doesn't seem to be in the array of supported protocols: [version_number] => 462597 [age] => 2 [features] => 1597 [ssl_version_number] => 0 [version] => 7.15.5 [host] => x86_64-redhat-linux-gnu [ssl_version] => OpenSSL/0.9.8b [libz_version] => 1.2.3 [protocols] => Array ( [0] => tftp [1] => ftp [2] => telnet [3] => dict [4] => ldap [5] => http [6] => file [7] => https [8] => ftps ) Is this a matter of my version of cURL being outdated, or is the SFTP protocol simply not supported at all? Any advice is greatly appreciated.

  Read the article

• SQL Server 2008 R2 Enterprise won't install on Windows 2008 R2 Enterprise

  - by Carlos Paulino

  I've been trying to install SQL Server on a new Windows Server 2008. I have tried everything but I haven't been able to narrow down the problem. When the installation fails I get " Exit code (Decimal): -2068643839". The problem with this is that according to Microsoft this is a generic error code. I follow their guide to look into the detail.txt inside C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\ But I can't find something that specifies the exact error. Any suggestions ? Thanks in advanced. I uploaded to detail.txt to http://www.megaupload.com/?d=0MV46SZH because it is to big to paste here. Below is the summary.txt ---------- Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2011-02-28 11:29:56 End time: 2011-02-28 11:34:45 Requested action: Install Machine Properties: Machine name: SA-SERVER Machine processor count: 8 OS version: Windows Server 2008 R2 OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: F:\x64\setup\ Installation edition: ENTERPRISE User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\SYSTEM AGTSVCPASSWORD: ***** AGTSVCSTARTUPTYPE: Manual ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: <empty> ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: <empty> ASSVCPASSWORD: ***** ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: <empty> ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Disabled CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini CUSOURCE: ENABLERANU: False ENU: True ERRORREPORTING: False FARMACCOUNT: <empty> FARMADMINPORT: 0 FARMPASSWORD: ***** FEATURES: SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK,OCS FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: <empty> FTSVCACCOUNT: <empty> FTSVCPASSWORD: ***** HELP: False IACCEPTSQLSERVERLICENSETERMS: False INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\ INSTALLSQLDATADIR: <empty> INSTANCEDIR: D:\SQLServer INSTANCEID: MSSQLSERVER INSTANCENAME: MSSQLSERVER ISSVCACCOUNT: NT AUTHORITY\SYSTEM ISSVCPASSWORD: ***** ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: ***** PCUSOURCE: PID: ***** QUIET: False QUIETSIMPLE: False ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: ***** RSSVCSTARTUPTYPE: Automatic SAPWD: ***** SECURITYMODE: SQL SQLBACKUPDIR: <empty> SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT AUTHORITY\SYSTEM SQLSVCPASSWORD: ***** SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SA-SERVER\Administrator SQLTEMPDBDIR: <empty> SQLTEMPDBLOGDIR: <empty> SQLUSERDBDIR: <empty> SQLUSERDBLOGDIR: <empty> SQMREPORTING: False TCPENABLED: 1 UIMODE: Normal X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Integration Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Connectivity Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Complete Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Backwards Compatibility Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Business Intelligence Development Studio Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Microsoft Sync Framework Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\SystemConfigurationCheck_Report.htm

  Read the article

• Ubuntu 10.10 Ad-Hoc Setup (from Wireless Router, to Ubuntu Server/Desktop to Wireless Router)

  - by user60375

  Okay, so I know there are different approaches for this, but I will explain my story briefly before getting to the technical stuff. My fiancée and I are going through some financial issues (as I assume a lot of us are). We ended up having to move from our house and stay with some friends/family for 6 months, just to get ourselves caught up. (Medical bills, among other issues,etc). So this is where it gets fun. At our friends house, we are staying in the loft setup which is not near the cable modem and wireless router. I have a "hand-crafted" media center running XBMC, an Ubuntu 10.10 Server/Desktop (multi-purpose, very powerful and tons drive space), two working laptops, a between the two of us we have multiple wireless devices/phones. Now our friends Wireless router doesn't have any options for assigning IP addresses, but my router does. My current setup is: Friends Cable Modem -- Friend's Wireless Router -- Ubuntu 10.10 Server -- My Wireless Router (local-link from Friend's wireless (incoming) to sharing connection on ETH0 (outgoing)) -- to all devices. (Wireless Modem, Ubuntu Server that share's it's wireless incoming connection to the ethernet port my Wireless router share's with the rest of the devices). I setup my router to use default settings from my friend's router, using Google's DNS on my router (disabled DNS setup on Ubuntu Server), everything is assigned nicely and runs smooth. My Ubuntu server was given the address 10.42.43.1 (assuming standard from Network-Manager). (On the Ubuntu machine that shares to my wireless router; I have some server apps installed, but mainly just use Samba/NFS/Tangerine action. My problem/goal is that every device has no problem of accessing the internet from my router, the media-center has an assigned ip address, all services from all devices (ZeroConf, Avanhi, Bonjour, GIT, SSH, FTP, Apache2, etc) all work correctly except from my Ubuntu Server (which serves the wireless connection to ETH0 to another Wireless Router). The Ubuntu 10.10 Server/Desktop is not broadcasting anything (the Zeroconf Service Discovery 0.4 Gnome Applet shows the services from the Ubuntu server but no other computers can see them). I can access it from my Media-Center (Running Xbuntu 10.04) if I direct it to 10.42.43.1, no problem. But I cannot access Tangerine (Daapd) and the Samba shares do not show up on any computers for 10.42.43.1 (not in the WORKGROUP which Samba is setup simple and default but I can direct computers to that address and the shares will add except on a damn Windows 7 parition). Is this an issue with how I have my router setup and possible the gateway? An issue with Network-Manager? And issue with my Ubuntu Server/Desktop? I know there is a lot to that, but it's simpler than I probably have explained? Any help would be appreciated. If you need more details, I can provide them. If there is a better way of my attempting this home-network, please let me know. Thanks in advance for the help.

  Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >