Search Results

Search found 11199 results on 448 pages for 'self modifying'.

Page 218/448 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

  • Increase efficiency of a loop with jQuery

    - by Pez Cuckow
    I have a game coded in jQuery where bots are moved around the screen. The below code is a loop that runs every 20ms, currently if you have over 15 bots you start to notice the browser lagging (simply because of all the advanced collision detection going on). Is there any way to reduce the lag, can I make it any more efficient? P.s. sorrry for just posting a block of code, I can't see a way to make my point clear enough without! $.playground().registerCallback(function(){ //Movement Loop if(!pause) { for (var i in bots) { //bots - color, dir, x, y, z, spawned?, spawnerid, prevd var self = $('#b' + i); var current = bots[i]; if(bots[i][5]==1) { var xspeed = 0, yspeed = 0; if(current[1]==0) { yspeed = -D_SPEED; } else if(current[1]==1) { xspeed = D_SPEED; } else if(current[1]==2) { yspeed = D_SPEED; } else if(current[1]==3) { xspeed = -D_SPEED; } var x = current[2] + xspeed; var y = current[3] + yspeed; var z = current[3] + 120; if(current[2]>0&&x>PLAYGROUND_WIDTH||current[2]<0&&x<-GRID_SIZE|| current[3]>0&&y>PLAYGROUND_HEIGHT||current[3]<0&&y<-GRID_SIZE) { remove_bot(i, self); } else { if(current[7]!=current[1]) { self.setAnimation(colors[current[0]][current[1]]); bots[i][7] = current[1]; } if(self.css({"left": ""+(x)+"px", "top": ""+(y)+"px", "z-index": z})) { bots[i][2] = x; bots[i][3] = y; bots[i][4] = z; bots[i][8]++; } } } } $("#debug").html(dump(arrows)); $(".bot").each(function(){ var b_id = $(this).attr("id").substr(1); var collision = false; var c_bot = bots[b_id]; var b_x = c_bot[2]; var b_y = c_bot[3]; var b_d = c_bot[1]; $(this).collision(".arrow,#arrows").each(function(){ //Many thanks to Selim Arsever for this fix! var a_id = $(this).attr("id").substr(1); var piece = arrows[a_id]; var a_v = piece[0]; if(a_v==1) { var a_x = piece[2]; var a_y = piece[3]; var d_x = b_x-a_x; var d_y = b_y-a_y; if(d_x>=4&&d_x<=5&&d_y>=1&&d_y<=2) { //bots - color, dir, x, y, z, spawned?, spawnerid, prevd bots[b_id][7] = c_bot[1]; bots[b_id][1] = piece[1]; collision = true; } } }); if(!collision) { $(this).collision(".wall,#level").each(function(){ var w_id = $(this).attr("id").substr(1); var piece = pieces[w_id]; var w_x = piece[1]; var w_y = piece[2]; d_x = b_x-w_x; d_y = b_y-w_y; if(b_d==0&&d_x>=4&&d_x<=5&&d_y>=27&&d_y<=28) { kill_bot(b_id); collision = true; } //4 // 33 if(b_d==1&&d_x>=-12&&d_x<=-11&&d_y>=21&&d_y<=22) { kill_bot(b_id); collision = true; } //-14 // 21 if(b_d==2&&d_x>=4&&d_x<=5&&d_y>=-9&&d_y<=-8) { kill_bot(b_id); collision = true; } //4 // -9 if(b_d==3&&d_x>=22&&d_x<=23&&d_y>=20&&d_y<=21) { kill_bot(b_id); collision = true; } //22 // 21 }); } if(!collision&&c_bot[8]>GRID_MOVE) { $(this).collision(".spawn,#level").each(function(){ var s_id = $(this).attr("id").substr(1); var piece = pieces[s_id]; var s_x = piece[1]; var s_y = piece[2]; d_x = b_x-s_x; d_y = b_y-s_y; if(b_d==0&&d_x>=4&&d_x<=5&&d_y>=19&&d_y<=20) { kill_bot(b_id); collision = true; } //4 // 33 if(b_d==1&&d_x>=-14&&d_x<=-13&&d_y>=11&&d_y<=12) { kill_bot(b_id); collision = true; } //-14 // 21 if(b_d==2&&d_x>=4&&d_x<=5&&d_y>=-11&&d_y<=-10) { kill_bot(b_id); collision = true; } //4 // -9 if(b_d==3&&d_x>=22&&d_x<=23&&d_y>=11&&d_y<=12) { kill_bot(b_id); collision = true; } //22 // 21*/ }); } if(!collision) { $(this).collision(".exit,#level").each(function(){ var e_id = $(this).attr("id").substr(1); var piece = pieces[e_id]; var e_x = piece[1]; var e_y = piece[2]; d_x = b_x-e_x; d_y = b_y-e_y; if(d_x>=4&&d_x<=5&&d_y>=1&&d_y<=2) { current_bots++; bots[b_id] = false; $("#current_bots").html(current_bots); $("#b" + b_id).setAnimation(exit[2], function(node){$(node).fadeOut(200)}); } }); } if(!collision) { $(this).collision(".bot,#level").each(function(){ var bd_id = $(this).attr("id").substr(1); if(bd_id!=b_id) { var piece = bots[bd_id]; var bd_x = piece[2]; var bd_y = piece[3]; d_x = b_x-bd_x; d_y = b_y-bd_y; if(d_x>=0&&d_x<=2&&d_y>=0&&d_y<=2) { kill_bot(b_id); kill_bot(bd_id); collision = true; } } }); } }); } }, REFRESH_RATE); Many thanks,

    Read the article

  • How do I implement AABB ray cast hit checking for opengl es on the iPhone

    - by Big Fizzy
    Basically, I draw a 3D cube, I can spin it around but I want to be able to touch it and know where on my cube's surface the user touched. I'm using for setting up, generating and spinning. Its based on the Molecules code and NeHe tutorial #5. Any help, links, tutorials and code would be greatly appreciated. I have lots of development experience but nothing much in the way of openGL and 3d. // // GLViewController.h // NeHe Lesson 05 // // Created by Jeff LaMarche on 12/12/08. // Copyright Jeff LaMarche Consulting 2008. All rights reserved. // #import "GLViewController.h" #import "GLView.h" @implementation GLViewController - (void)drawBox { static const GLfloat cubeVertices[] = { -1.0f, 1.0f, 1.0f, 1.0f, 1.0f, 1.0f, 1.0f,-1.0f, 1.0f, -1.0f,-1.0f, 1.0f, -1.0f, 1.0f,-1.0f, 1.0f, 1.0f,-1.0f, 1.0f,-1.0f,-1.0f, -1.0f,-1.0f,-1.0f }; static const GLubyte cubeNumberOfIndices = 36; const GLubyte cubeVertexFaces[] = { 0, 1, 5, // Half of top face 0, 5, 4, // Other half of top face 4, 6, 5, // Half of front face 4, 6, 7, // Other half of front face 0, 1, 2, // Half of back face 0, 3, 2, // Other half of back face 1, 2, 5, // Half of right face 2, 5, 6, // Other half of right face 0, 3, 4, // Half of left face 7, 4, 3, // Other half of left face 3, 6, 2, // Half of bottom face 6, 7, 3, // Other half of bottom face }; const GLubyte cubeFaceColors[] = { 0, 255, 0, 255, 255, 125, 0, 255, 255, 0, 0, 255, 255, 255, 0, 255, 0, 0, 255, 255, 255, 0, 255, 255 }; glEnableClientState(GL_VERTEX_ARRAY); glVertexPointer(3, GL_FLOAT, 0, cubeVertices); int colorIndex = 0; for(int i = 0; i < cubeNumberOfIndices; i += 3) { glColor4ub(cubeFaceColors[colorIndex], cubeFaceColors[colorIndex+1], cubeFaceColors[colorIndex+2], cubeFaceColors[colorIndex+3]); int face = (i / 3.0); if (face%2 != 0.0) colorIndex+=4; glDrawElements(GL_TRIANGLES, 3, GL_UNSIGNED_BYTE, &cubeVertexFaces[i]); } glDisableClientState(GL_VERTEX_ARRAY); } //move this to a data model later! - (GLfixed)floatToFixed:(GLfloat)aValue; { return (GLfixed) (aValue * 65536.0f); } - (void)drawViewByRotatingAroundX:(float)xRotation rotatingAroundY:(float)yRotation scaling:(float)scaleFactor translationInX:(float)xTranslation translationInY:(float)yTranslation view:(GLView*)view; { glMatrixMode(GL_MODELVIEW); GLfixed currentModelViewMatrix[16] = { 45146, 47441, 2485, 0, -25149, 26775,-54274, 0, -40303, 36435, 36650, 0, 0, 0, 0, 65536 }; /* GLfixed currentModelViewMatrix[16] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 65536 }; */ //glLoadIdentity(); //glOrthof(-1.0f, 1.0f, -1.5f, 1.5f, -10.0f, 4.0f); // Reset rotation system if (isFirstDrawing) { //glLoadIdentity(); glMultMatrixx(currentModelViewMatrix); [self configureLighting]; isFirstDrawing = NO; } // Scale the view to fit current multitouch scaling GLfixed fixedPointScaleFactor = [self floatToFixed:scaleFactor]; glScalex(fixedPointScaleFactor, fixedPointScaleFactor, fixedPointScaleFactor); // Perform incremental rotation based on current angles in X and Y glGetFixedv(GL_MODELVIEW_MATRIX, currentModelViewMatrix); GLfloat totalRotation = sqrt(xRotation*xRotation + yRotation*yRotation); glRotatex([self floatToFixed:totalRotation], (GLfixed)((xRotation/totalRotation) * (GLfloat)currentModelViewMatrix[1] + (yRotation/totalRotation) * (GLfloat)currentModelViewMatrix[0]), (GLfixed)((xRotation/totalRotation) * (GLfloat)currentModelViewMatrix[5] + (yRotation/totalRotation) * (GLfloat)currentModelViewMatrix[4]), (GLfixed)((xRotation/totalRotation) * (GLfloat)currentModelViewMatrix[9] + (yRotation/totalRotation) * (GLfloat)currentModelViewMatrix[8]) ); // Translate the model by the accumulated amount glGetFixedv(GL_MODELVIEW_MATRIX, currentModelViewMatrix); float currentScaleFactor = sqrt(pow((GLfloat)currentModelViewMatrix[0] / 65536.0f, 2.0f) + pow((GLfloat)currentModelViewMatrix[1] / 65536.0f, 2.0f) + pow((GLfloat)currentModelViewMatrix[2] / 65536.0f, 2.0f)); xTranslation = xTranslation / (currentScaleFactor * currentScaleFactor); yTranslation = yTranslation / (currentScaleFactor * currentScaleFactor); // Grab the current model matrix, and use the (0,4,8) components to figure the eye's X axis in the model coordinate system, translate along that glTranslatef(xTranslation * (GLfloat)currentModelViewMatrix[0] / 65536.0f, xTranslation * (GLfloat)currentModelViewMatrix[4] / 65536.0f, xTranslation * (GLfloat)currentModelViewMatrix[8] / 65536.0f); // Grab the current model matrix, and use the (1,5,9) components to figure the eye's Y axis in the model coordinate system, translate along that glTranslatef(yTranslation * (GLfloat)currentModelViewMatrix[1] / 65536.0f, yTranslation * (GLfloat)currentModelViewMatrix[5] / 65536.0f, yTranslation * (GLfloat)currentModelViewMatrix[9] / 65536.0f); // Black background, with depth buffer enabled glClearColor(0.0f, 0.0f, 0.0f, 1.0f); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); [self drawBox]; } - (void)configureLighting; { const GLfixed lightAmbient[] = {13107, 13107, 13107, 65535}; const GLfixed lightDiffuse[] = {65535, 65535, 65535, 65535}; const GLfixed matAmbient[] = {65535, 65535, 65535, 65535}; const GLfixed matDiffuse[] = {65535, 65535, 65535, 65535}; const GLfixed lightPosition[] = {30535, -30535, 0, 0}; const GLfixed lightShininess = 20; glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glEnable(GL_COLOR_MATERIAL); glMaterialxv(GL_FRONT_AND_BACK, GL_AMBIENT, matAmbient); glMaterialxv(GL_FRONT_AND_BACK, GL_DIFFUSE, matDiffuse); glMaterialx(GL_FRONT_AND_BACK, GL_SHININESS, lightShininess); glLightxv(GL_LIGHT0, GL_AMBIENT, lightAmbient); glLightxv(GL_LIGHT0, GL_DIFFUSE, lightDiffuse); glLightxv(GL_LIGHT0, GL_POSITION, lightPosition); glEnable(GL_DEPTH_TEST); glShadeModel(GL_SMOOTH); glEnable(GL_NORMALIZE); } -(void)setupView:(GLView*)view { const GLfloat zNear = 0.1, zFar = 1000.0, fieldOfView = 60.0; GLfloat size; glMatrixMode(GL_PROJECTION); glEnable(GL_DEPTH_TEST); size = zNear * tanf(DEGREES_TO_RADIANS(fieldOfView) / 2.0); CGRect rect = view.bounds; glFrustumf(-size, size, -size / (rect.size.width / rect.size.height), size / (rect.size.width / rect.size.height), zNear, zFar); glViewport(0, 0, rect.size.width, rect.size.height); glScissor(0, 0, rect.size.width, rect.size.height); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glClearColor(0.0f, 0.0f, 0.0f, 1.0f); glTranslatef(0.0f, 0.0f, -6.0f); isFirstDrawing = YES; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; } - (void)dealloc { [super dealloc]; } @end

    Read the article

  • Increase efficiency of a loop with jQuery and GameQuery

    - by Pez Cuckow
    I have a game coded in jQuery where bots are moved around the screen. The below code is a loop that runs every 20ms, currently if you have over 15 bots you start to notice the browser lagging (simply because of all the advanced collision detection going on). Is there any way to reduce the lag, can I make it any more efficient? P.s. sorrry for just posting a block of code, I can't see a way to make my point clear enough without! $.playground().registerCallback(function(){ //Movement Loop if(!pause) { for (var i in bots) { //bots - color, dir, x, y, z, spawned?, spawnerid, prevd var self = $('#b' + i); var current = bots[i]; if(bots[i][5]==1) { var xspeed = 0, yspeed = 0; if(current[1]==0) { yspeed = -D_SPEED; } else if(current[1]==1) { xspeed = D_SPEED; } else if(current[1]==2) { yspeed = D_SPEED; } else if(current[1]==3) { xspeed = -D_SPEED; } var x = current[2] + xspeed; var y = current[3] + yspeed; var z = current[3] + 120; if(current[2]>0&&x>PLAYGROUND_WIDTH||current[2]<0&&x<-GRID_SIZE|| current[3]>0&&y>PLAYGROUND_HEIGHT||current[3]<0&&y<-GRID_SIZE) { remove_bot(i, self); } else { if(current[7]!=current[1]) { self.setAnimation(colors[current[0]][current[1]]); bots[i][7] = current[1]; } if(self.css({"left": ""+(x)+"px", "top": ""+(y)+"px", "z-index": z})) { bots[i][2] = x; bots[i][3] = y; bots[i][4] = z; bots[i][8]++; } } } } $("#debug").html(dump(arrows)); $(".bot").each(function(){ var b_id = $(this).attr("id").substr(1); var collision = false; var c_bot = bots[b_id]; var b_x = c_bot[2]; var b_y = c_bot[3]; var b_d = c_bot[1]; $(this).collision(".arrow,#arrows").each(function(){ //Many thanks to Selim Arsever for this fix! var a_id = $(this).attr("id").substr(1); var piece = arrows[a_id]; var a_v = piece[0]; if(a_v==1) { var a_x = piece[2]; var a_y = piece[3]; var d_x = b_x-a_x; var d_y = b_y-a_y; if(d_x>=4&&d_x<=5&&d_y>=1&&d_y<=2) { //bots - color, dir, x, y, z, spawned?, spawnerid, prevd bots[b_id][7] = c_bot[1]; bots[b_id][1] = piece[1]; collision = true; } } }); if(!collision) { $(this).collision(".wall,#level").each(function(){ var w_id = $(this).attr("id").substr(1); var piece = pieces[w_id]; var w_x = piece[1]; var w_y = piece[2]; d_x = b_x-w_x; d_y = b_y-w_y; if(b_d==0&&d_x>=4&&d_x<=5&&d_y>=27&&d_y<=28) { kill_bot(b_id); collision = true; } //4 // 33 if(b_d==1&&d_x>=-12&&d_x<=-11&&d_y>=21&&d_y<=22) { kill_bot(b_id); collision = true; } //-14 // 21 if(b_d==2&&d_x>=4&&d_x<=5&&d_y>=-9&&d_y<=-8) { kill_bot(b_id); collision = true; } //4 // -9 if(b_d==3&&d_x>=22&&d_x<=23&&d_y>=20&&d_y<=21) { kill_bot(b_id); collision = true; } //22 // 21 }); } if(!collision&&c_bot[8]>GRID_MOVE) { $(this).collision(".spawn,#level").each(function(){ var s_id = $(this).attr("id").substr(1); var piece = pieces[s_id]; var s_x = piece[1]; var s_y = piece[2]; d_x = b_x-s_x; d_y = b_y-s_y; if(b_d==0&&d_x>=4&&d_x<=5&&d_y>=19&&d_y<=20) { kill_bot(b_id); collision = true; } //4 // 33 if(b_d==1&&d_x>=-14&&d_x<=-13&&d_y>=11&&d_y<=12) { kill_bot(b_id); collision = true; } //-14 // 21 if(b_d==2&&d_x>=4&&d_x<=5&&d_y>=-11&&d_y<=-10) { kill_bot(b_id); collision = true; } //4 // -9 if(b_d==3&&d_x>=22&&d_x<=23&&d_y>=11&&d_y<=12) { kill_bot(b_id); collision = true; } //22 // 21*/ }); } if(!collision) { $(this).collision(".exit,#level").each(function(){ var e_id = $(this).attr("id").substr(1); var piece = pieces[e_id]; var e_x = piece[1]; var e_y = piece[2]; d_x = b_x-e_x; d_y = b_y-e_y; if(d_x>=4&&d_x<=5&&d_y>=1&&d_y<=2) { current_bots++; bots[b_id] = false; $("#current_bots").html(current_bots); $("#b" + b_id).setAnimation(exit[2], function(node){$(node).fadeOut(200)}); } }); } if(!collision) { $(this).collision(".bot,#level").each(function(){ var bd_id = $(this).attr("id").substr(1); if(bd_id!=b_id) { var piece = bots[bd_id]; var bd_x = piece[2]; var bd_y = piece[3]; d_x = b_x-bd_x; d_y = b_y-bd_y; if(d_x>=0&&d_x<=2&&d_y>=0&&d_y<=2) { kill_bot(b_id); kill_bot(bd_id); collision = true; } } }); } }); } }, REFRESH_RATE); Many thanks,

    Read the article

  • Reading a child process's /proc/pid/mem file from the parent

    - by Amittai Aviram
    In the program below, I am trying to cause the following to happen: Process A assigns a value to a stack variable a. Process A (parent) creates process B (child) with PID child_pid. Process B calls function func1, passing a pointer to a. Process B changes the value of variable a through the pointer. Process B opens its /proc/self/mem file, seeks to the page containing a, and prints the new value of a. Process A (at the same time) opens /proc/child_pid/mem, seeks to the right page, and prints the new value of a. The problem is that, in step 6, the parent only sees the old value of a in /proc/child_pid/mem, while the child can indeed see the new value in its /proc/self/mem. Why is this the case? Is there any way that I can get the parent to to see the child's changes to its address space through the /proc filesystem? #include <fcntl.h> #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/wait.h> #include <unistd.h> #define PAGE_SIZE 0x1000 #define LOG_PAGE_SIZE 0xc #define PAGE_ROUND_DOWN(v) ((v) & (~(PAGE_SIZE - 1))) #define PAGE_ROUND_UP(v) (((v) + PAGE_SIZE - 1) & (~(PAGE_SIZE - 1))) #define OFFSET_IN_PAGE(v) ((v) & (PAGE_SIZE - 1)) # if defined ARCH && ARCH == 32 #define BP "ebp" #define SP "esp" #else #define BP "rbp" #define SP "rsp" #endif typedef struct arg_t { int a; } arg_t; void func1(void * data) { arg_t * arg_ptr = (arg_t *)data; printf("func1: old value: %d\n", arg_ptr->a); arg_ptr->a = 53; printf("func1: address: %p\n", &arg_ptr->a); printf("func1: new value: %d\n", arg_ptr->a); } void expore_proc_mem(void (*fn)(void *), void * data) { off_t frame_pointer, stack_start; char buffer[PAGE_SIZE]; const char * path = "/proc/self/mem"; int child_pid, status; int parent_to_child[2]; int child_to_parent[2]; arg_t * arg_ptr; off_t child_offset; asm volatile ("mov %%"BP", %0" : "=m" (frame_pointer)); stack_start = PAGE_ROUND_DOWN(frame_pointer); printf("Stack_start: %lx\n", (unsigned long)stack_start); arg_ptr = (arg_t *)data; child_offset = OFFSET_IN_PAGE((off_t)&arg_ptr->a); printf("Address of arg_ptr->a: %p\n", &arg_ptr->a); pipe(parent_to_child); pipe(child_to_parent); bool msg; int child_mem_fd; char child_path[0x20]; child_pid = fork(); if (child_pid == -1) { perror("fork"); exit(EXIT_FAILURE); } if (!child_pid) { close(child_to_parent[0]); close(parent_to_child[1]); printf("CHILD (pid %d, parent pid %d).\n", getpid(), getppid()); fn(data); msg = true; write(child_to_parent[1], &msg, 1); child_mem_fd = open("/proc/self/mem", O_RDONLY); if (child_mem_fd == -1) { perror("open (child)"); exit(EXIT_FAILURE); } printf("CHILD: child_mem_fd: %d\n", child_mem_fd); if (lseek(child_mem_fd, stack_start, SEEK_SET) == (off_t)-1) { perror("lseek"); exit(EXIT_FAILURE); } if (read(child_mem_fd, buffer, sizeof(buffer)) != sizeof(buffer)) { perror("read"); exit(EXIT_FAILURE); } printf("CHILD: new value %d\n", *(int *)(buffer + child_offset)); read(parent_to_child[0], &msg, 1); exit(EXIT_SUCCESS); } else { printf("PARENT (pid %d, child pid %d)\n", getpid(), child_pid); printf("PARENT: child_offset: %lx\n", child_offset); read(child_to_parent[0], &msg, 1); printf("PARENT: message from child: %d\n", msg); snprintf(child_path, 0x20, "/proc/%d/mem", child_pid); printf("PARENT: child_path: %s\n", child_path); child_mem_fd = open(path, O_RDONLY); if (child_mem_fd == -1) { perror("open (child)"); exit(EXIT_FAILURE); } printf("PARENT: child_mem_fd: %d\n", child_mem_fd); if (lseek(child_mem_fd, stack_start, SEEK_SET) == (off_t)-1) { perror("lseek"); exit(EXIT_FAILURE); } if (read(child_mem_fd, buffer, sizeof(buffer)) != sizeof(buffer)) { perror("read"); exit(EXIT_FAILURE); } printf("PARENT: new value %d\n", *(int *)(buffer + child_offset)); close(child_mem_fd); printf("ENDING CHILD PROCESS.\n"); write(parent_to_child[1], &msg, 1); if (waitpid(child_pid, &status, 0) == -1) { perror("waitpid"); exit(EXIT_FAILURE); } } } int main(void) { arg_t arg; arg.a = 42; printf("In main: address of arg.a: %p\n", &arg.a); explore_proc_mem(&func1, &arg.a); return EXIT_SUCCESS; } This program produces the output below. Notice that the value of a (boldfaced) differs between parent's and child's reading of the /proc/child_pid/mem file. In main: address of arg.a: 0x7ffffe1964f0 Stack_start: 7ffffe196000 Address of arg_ptr-a: 0x7ffffe1964f0 PARENT (pid 20376, child pid 20377) PARENT: child_offset: 4f0 CHILD (pid 20377, parent pid 20376). func1: old value: 42 func1: address: 0x7ffffe1964f0 func1: new value: 53 PARENT: message from child: 1 CHILD: child_mem_fd: 4 PARENT: child_path: /proc/20377/mem CHILD: new value 53 PARENT: child_mem_fd: 7 PARENT: new value 42 ENDING CHILD PROCESS.

    Read the article

  • UNC Paths in Google Chrome

    - by Daemonic
    We have an internal wiki setup and do a lot of linking to files on internal shares. We typically use this format (where Share is the name of the server): <a href="file:///\\share\blah\blah\file.txt"> This works in FireFox (after modifying the userpref.js) and IE. We've now had a bit of an adoption of Google Chrome. These links do not appear to work in Chrome. I've been unable to find anything about it on the net so far. :/ This is served up on an IIS box (7.0, https). It seems to be that Chrome has some protection like FireFox does and prevents file links from being loaded from a webpage. Does anyone know of any workarounds?

    Read the article

  • Web Client Service constantly in 'Stopping' state

    - by Mark
    I have a user who's Web Client service constantly reports that it's in the 'Stopping' state and it's hindering her ability to save JMP files to a SharePoint site using the UNC path. She's running Windows XP Service Pack 3. I've tried modifying the Web Client parameters in the registry for UseBasicAuth and FileAttributesLimitInBytes with no luck. When I set the service to Manual and then try to start it after Windows boots up, it starts and then immediately goes into the Stopping state again. Other things I've tried: Removing/Reinstalling her network card Removing/Reinstalling the Client for Microsoft Networks and File and Print Sharing Checked that the BITS and RPC services are running fine (not sure if they're related) Does anyone have any other ideas? Is there a way to repair/rebuild the Web Client service?

    Read the article

  • How to Route Traffic in Case PPTP Remote Client is on Same Subnet as Server

    - by Marcus Cole
    I've a PPTP server setup on my local home network (192.168.1.0/24, pfSense). Now sometimes when I'm away and want to connect remotely my client (Windows 7) is also on the same network because e.g. the hotel has set it up the same way. Thus the connection works, but I can't reach any PC on my home network because everything is routed directly to the client local router which is in the same subnet. Is there a way to work around this by messing with a configuration or adapting Windows routing table, i.e. without modifying either network?

    Read the article

  • Samba: session setup failed: NT_STATUS_LOGON_FAILURE

    - by stivlo
    I tried to set up Samba with "unix password sync", but I still get logon failure. I am running Ubuntu Natty Narwhal. $ smbclient -L localhost Enter stivlo's password: session setup failed: NT_STATUS_LOGON_FAILURE Here is my /etc/samba/smb.conf [global] workgroup = obliquid server string = %h server (Samba, Ubuntu) dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user [www] path = /var/www browsable = yes read only = no create mask = 0755 After modifying I restarted the servers: $ sudo restart smbd $ sudo restart nmbd However I still can't logon with my Unix username and password. Can anyone please help? Thank you in advance!

    Read the article

  • GUI tool for packet replay

    - by superuser
    Is there a freeware Windows/Linux GUI packet replay tool that has the advanced features of tcpreplay (http://tcpreplay.synfin.net/) or bittwist (http://bittwist.sourceforge.net)? I'm particularly interested in the following features: Open pcap files for editing and injecting into arbitrary network Change source and destination addresses/ports of UDP packets Change packet timing (with millisecond resolution) Edit packet contents, including modifying its length Has graphical front end for Windows or Linux (or Mac OS X) I've scanned a couple lists of potential tools (here and here), but nothing really fits my requirements. The closest tool might be Ostinato (http://code.google.com/p/ostinato/), but it doesn't appear to open packet capture files. Thanks for any help!

    Read the article

  • Add a custom certificate authority to Ubuntu

    - by rmrobins
    Hello; I have created a custom root certificate authority for an internal network, example.com. Ideally, I would like to be able to deploy the CA certificate associated with this certificate authority to my Linux clients (running Ubuntu 9.04 and CentOS 5.3), such that all of the applications automatically recognize the certificate authority (i.e. I do not want to have to configure Firefox, Thunderbird, etc manually to trust this certificate authority). I have attempted this on Ubuntu by copying the PEM-encoded CA certificate to /etc/ssl/certs/ and /usr/share/ca-certificates/, as well as by modifying /etc/ca-certificates.conf and rerunning update-ca-certificates, however applications do not seem to recognize that I have added another trusted CA to the system. Therefore, is it possible to add a CA certificate once to a system, or is it necessary to manually add the CA to all of the possible applications that will attempt to make SSL connections to hosts signed by this CA in my network? If it is possible to add a CA certificate once to the system, where does it need to go? Thanks.

    Read the article

  • Linux networking "jail" for a single process

    - by halp
    I need to tune up a networking app for network specific things like: make it use a DNS server different than the default one from /etc/resolv.conf make sure it does not try to connect to certain hosts/ports using tcp/udp connections I know I can get away with just modifying /etc/resolv.conf and writing some iptables rules, but going for a default DENY firewall policy for outgoing IP packets can trigger malfunctions in other services running on the server. I know I can set up a virtual machine with a whole OS and run my app there, but it seems a bit overkill. Is it possible to have a networking "jail" for a single app (think single Linux process) that could accept iptables-like rules for network traffic (think in terms of IP packets and above) allowed to and from this particular app? Maybe this is achievable through some dynamically loaded library that can deal with the networking layer, the same manner tsocks does, but more fine-grained?

    Read the article

  • emacs - Widget Custom Theme

    - by Abdillah
    I'm starting using emacs. I know that everything of emacs is customizable. But, one thing I can't even found on internet is modifying the default emacs' widget's Look and Feel. Is there some way to custom it's background, shape, etc or just using UTF-8 character (for example checkbox using ? character)? Well, as a new user, I was quite boring with the customize interface. Some kind of I want to change onto a flat-styled ui or a better one.

    Read the article

  • Ubuntu only boots with USB plugged in

    - by Ben
    I'm new to the Linux world so please bear with me! :-) I installed Ubuntu via USB drive onto my hard drive. If I boot the PC without the usb drive I used, Ubuntu will not load. After booting I can unplug without any consequences. I looked on the hard drive and there is a boot folder. On the USB drive, this is the tree contents: /media/disk$ tree . |-- adtext.cfg |-- boot.cat |-- f10.txt |-- f1.txt |-- f2.txt |-- f3.txt |-- f4.txt |-- f5.txt |-- f6.txt |-- f7.txt |-- f8.txt |-- f9.txt |-- initrd.gz |-- isolinux.bin |-- isolinux.cfg |-- ldlinux.sys |-- linux |-- menu.c32 |-- menu.cfg |-- po4a.cfg |-- prompt.cfg |-- splash.png |-- stdmenu.cfg |-- syslinux.cfg |-- text.cfg |-- ubnfilel.txt |-- ubnpathl.txt `-- vesamenu.c32 Am I correct in my assumption that the boot aspect is associated to the USB drive? If so, how do I get it to boot without the USB? I'm guessing copying into some location and modifying grub?

    Read the article

  • Is it possible to disable ARP in Windows 7

    - by DriverGuy
    I have a unique requirement where I need to disable ARP on a Windows 7 box. In previous Windows versions you could modify the ArpRetryCount in the registry (and set it to 0), but this does not work in 7 (nor does it exist). Does anybody know how, or if this is possible? I've been asked to elaborate this more and I'm not quite sure how. I want to switch off ARP (including gratuitous arp) on Windows 7 for a project I'm working on. You can do this in Linux by simply adding '-arp' when you bring up an interface, but you cannot do this in Windows 7. You could in previous versions by modifying the registry, but this does not work any more. If the fine folk here aren't sure then I don't like my chances...

    Read the article

  • Postfix "warning: cannot get RSA private key from file"

    - by phew
    I just followed this tutorial to set up a postfix mailserver with dovecot and mysql as backend for virtual users. Now I got the most parts working, I can connect to pop3 pop3s imap and imaps. Using echo TEST-MAIL | mail [email protected] works fine, when I log into my hotmail account it shows the email. It also works in reverse hence my MX entry for mydomain.com finally has been propagated, so I am being able to receive emails sent from [email protected] to [email protected] and view them in Thunderbird using STARTTLS via IMAP. Doing a bit more research after I got the error message "5.7.1 : Relay access denied" when trying to send mails to [email protected] using Thunderbird being logged into [email protected], I figured out that my server was acting as an "Open Mail Relay", which - ofcourse - is a bad thing. Digging more into the optional parts of the tutorial like shown workaround.org/comment/2536 and workaround.org/ispmail/squeeze/postfix-smtp-auth I decided to complete these steps aswell to be able to send mails via [email protected] through Mozilla Thunderbird, not getting the error message "5.7.1 : Relay access denied" anymore (as common mailservers reject open relayed emails). But now I ran into an error trying to get postfix working with SMTPS, in /var/log/mail.log it reads Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: cannot get RSA private key from file /etc/ssl/certs/postfix.pem: disabling TLS support Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: TLS library problem: 20251:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:650:Expecting: ANY PRIVATE KEY: Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: TLS library problem: 20251:error:140B0009:SSL routines:SSL_CTX_use_PrivateKey_file:PEM lib:ssl_rsa.c:669: That error is logged right after I try to send a mail from my newly installed mailserver using SMTP SSL/TLS via port 465 in Thunderbird. Thunderbird then tells me a timeout occured. Google has a few results concerning that problem, yet I couldn't get it working with any of those. I would link some of them here but as a new user I am only allowed to use two hyperlinks. My /etc/postfix/master.cf looks like smtp inet n - - - - smtpd smtps inet n - - - - smtpd -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes and nmap tells me PORT STATE SERVICE [...] 465/tcp open smtps [...] my /etc/postfix/main.cf looks like smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no append_dot_mydomain = no readme_directory = no #smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem #default postfix generated #smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key #default postfix generated smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem smptd_tls_key_file = /etc/ssl/private/postfix.pem smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smptd_sasl_auth_enable = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination myhostname = mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost.com, localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf virtual_transport = dovecot dovecot_destination_recipient_limit = 1 mailbox_command = /usr/lib/dovecot/deliver The *.pem files were created like described in the tutorial above, using Postfix To create a certificate to be used by Postfix use: openssl req -new -x509 -days 3650 -nodes -out /etc/ssl/certs/postfix.pem -keyout /etc/ssl/private/postfix.pem Do not forget to set the permissions on the private key so that no unauthorized people can read it: chmod o= /etc/ssl/private/postfix.pem You will have to tell Postfix where to find your certificate and private key because by default it will look for a dummy certificate file called "ssl-cert-snakeoil": postconf -e smtpd_tls_cert_file=/etc/ssl/certs/postfix.pem postconf -e smtpd_tls_key_file=/etc/ssl/private/postfix.pem I think I don't have to include /etc/dovecot/dovecot.conf here, as login via imaps and pop3s works fine according to the logs. Only problem is making postfix properly use the self-generated, self-signed certificates. Any help appreciated! EDIT: I just tried this different tutorial on generating a self-signed certificate for postfix, still getting the same error. I really don't know what else to test. I also did check for the SSL libraries, but all seems to be fine: root@domain:~# ldd /usr/sbin/postfix linux-vdso.so.1 => (0x00007fff91b25000) libpostfix-global.so.1 => /usr/lib/libpostfix-global.so.1 (0x00007f6f8313d000) libpostfix-util.so.1 => /usr/lib/libpostfix-util.so.1 (0x00007f6f82f07000) libssl.so.0.9.8 => /usr/lib/libssl.so.0.9.8 (0x00007f6f82cb1000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007f6f82910000) libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x00007f6f826f7000) libdb-4.8.so => /usr/lib/libdb-4.8.so (0x00007f6f8237c000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007f6f82164000) libresolv.so.2 => /lib/libresolv.so.2 (0x00007f6f81f4e000) libc.so.6 => /lib/libc.so.6 (0x00007f6f81beb000) libdl.so.2 => /lib/libdl.so.2 (0x00007f6f819e7000) libz.so.1 => /usr/lib/libz.so.1 (0x00007f6f817d0000) libpthread.so.0 => /lib/libpthread.so.0 (0x00007f6f815b3000) /lib64/ld-linux-x86-64.so.2 (0x00007f6f83581000) After following Ansgar Wiechers instructions its finally working. postconf -n contained the lines as it should. The certificate/key check via openssl did show that both files are valid. So it indeed has been a permissions problem! Didn't know that chown'ing the /etc/ssl/*/postfix.pem files to postfix:postfix is not enough for postfix to read the files.

    Read the article

  • What can I do to prevent my user folder from being tampered with by malicious software?

    - by Tom Wijsman
    Let's assume some things: Back-ups do run every X minutes, yet the things I save should be permanent. There's a firewall and virus scanner in place, yet there happens to be a zero day attack on me. I am using Windows. (Although feel free to append Linux / OS X parts to your answer) Here is the problem Any software can change anything inside my user folder. Tampering with the files could cost me my life, whether it's accessing / modifying or wiping them. So, what I want to ask is: Is there a permission-based way to disallow programs from accessing my files in any way by default? Extending on the previous question, can I ensure certain programs can only access certain folders? Are there other less obtrusive ways than using Comodo? Or can I make Comodo less obtrusive? For example, the solution should be proof against (DO NOT RUN): del /F /S /Q %USERPROFILE%

    Read the article

  • How can I tell which config file Apache is using?

    - by Claudiu
    I'm trying to set up virtual hosts on Mac OS X. I've been modifying httpd.conf and restarting the server, but haven't had any luck in getting it to work. Furthermore, I notice that it's not serving files in the DocumentRoot mentioned in httpd.conf (Libraries/WebServer/Documents), but in a different directory (/usr/local/apache2/htdocs). I don't see this folder mentioned anywhere in httpd.conf. Furthermore, PHP works, but the "LoadModule php5_module" line is commented out. This makes me think it's using another .conf file. How can I figure out which config is actually being loaded? Update: I just deleted that httpd.conf and apache behaves the same after restart, so it definitely wasn't using it!

    Read the article

  • Cannot set MemOpMode or ProcVirtualization with syscfg.exe

    - by EGr
    When attempting to set MemOpMode or ProcVirtualization with syscfg.exe, I get the following error: C:\Users\EGr>syscfg --MemOpMode=AdvEccMode System Services or CSIOR disabled In the past, I have been told that this can be resolved by forcefully reinstalling the Dell Lifecycle controller firmware, and then trying again; however, I cannot find my notes on how to do that. Has anyone ever run into this issue, and does anyone know how I can fix it? If it is possible to forcefully reinstall the firmware, how would I do that? I've tried running the installer, but it fails after running for ~2 min. I believe there is a way to fix this as well, by adding/modifying a registry value at HKLM\System\Control\CurrentControlSet\Services\IPMIDRV (that might not be the correct path, but I know it is IPMIDRV). Is this a common issue? What is the actual cause of it?

    Read the article

  • Setting up fail2ban to ban failed phpMyAdmin login attempts

    - by Michael Robinson
    We've been using fail2ban to block failed ssh attempts. I would like to setup the same thing for phpMyAdmin as well. As phpMyAdmin doesn't log authentication attempts to a file (that I know of), I'm unsure of how best to go about this. Does a plugin / config exist that makes phpMyAdmin log authentication attempts to a file? Or is there some other place I should look for such an activity log? Ideally I will be able to find a solution that involved modifying fail2ban config only, as I have to configure fail2ban with the same options on multiple servers, and would prefer not to also modify the various phpMyAdmin installations on said servers.

    Read the article

  • Setting up SSL on Glassfish V2 or V3

    - by javanix
    My employer recently purchased a Trustwave SSL certificate. Trustwave advertises support on their website, but they don't give an installation guide like they do for their other servers at all, and I am having a difficult time getting it configured correctly with GlassFish. I found this http://blogs.sun.com/enterprisetechtips/entry/using_ssl_with_glassfish_v2 blog post that is sort of helpful, but I'm still unable to get it working (I think the issue is that I don't fully understand the GlassFish keystore, so I am modifying it incorrectly and the server throws security exceptions on startup). Does anyone have any experience doing so, and can you point me to a decent resource? Thanks for any help.

    Read the article

  • I cannot access my mongodb from internet ,Anybody can help me?

    - by VicoWu110
    I am using Mongodb database ,which is installed in my ubuntu with the ip address 126.22.252.25. The ubuntu version info is Ubuntu 12.04.3 LTS. My mongodb use the default 27017 port .On this local machine , I can use command "mongo --host 126.22.252.25" on the local machine to access, but I cannot use this command on any other linux mathine to access the db,nor can I use "telnet 126.22.252.25 27017" on my windows machine.I am sure 126.22.252.25 machine is accessable from internet because I can use winSCP and secureCRT to login to it.I run command "netstat -tnlp" , it shows below: tcp 0 0 0.0.0.0:27017 0.0.0.0:* LISTEN I have already change the /ect/mongodb.conf file , modifying bind_ip parameter from 0.0.0.0 to 126.22.252.25 So ,anyone can help me?

    Read the article

  • One server, Two APC UPS on redundant power supplies : How to trigger shutdown ?

    - by Falken
    I have a server racked and its redundant power supplies plugged in two APC Smart-UPS 3000 XLM. Each UPS is connected to two different mains power sources. Two instances of apcupsd are running, each one connected to its own UPS. They can both detect when an UPS is on Battery, and each UPS can then trigger a shutdown on the server. Question is : How NOT to shutdown if ONLY ONE UPS runs out of battery ? Note : Smart-UPS 3000 XLM has a "Power Sync" Function that is able to connect to its peer and detect its status. But when I pulled the plug out of one of them, the Shutdown order was sent anyway. I'm thinking about modifying the shutdown scripts to check with "apcaccess" if the other ups is down. Any experience on this would be appreciated !

    Read the article

  • Python version priority in OSX/UNIX PATH environment variable

    - by mindthief
    Hi all, I want my system to use /usr/bin/python, but it's currently using /opt/local/bin/python, which points to /usr/bin/python2.6. I tried modifying the PATH variable in my .bashrc as PATH=~/bin:$PATH ...and then set a symbolic link in ~/bin to point to /usr/bin/python. i.e. ~/bin/python --> /usr/bin/python I figured this might prioritize this symlink over the /opt/local version if it came before the other one in the PATH variable, but when I opened a new shell I still found python pointing to /opt/local/bin. Any advice on a good way to get the system to use /usr/bin/python? Also, I usually use ipython as opposed to python directly. I'm assuming that if the system starts to use the correct version of python then ipython would also use that version? If not, how could I also get ipython to use the correct version? Thanks!

    Read the article

  • maildir in Windows for IMAP

    - by User1
    I'm interested in accessing my IMAP accounts offline. I found that maildirs are a simple way to make it work. I found that [offlineimap] takes care of almost everything in making the IMAP-maildir sync happen. Then, I can open the account in Mutt or Wanderlust client. One major problem, maildirs use colons in their filenames. Windows doesn't allow colons. I tried mount -f -s -b -o managed "d:/tmp/mail" "/home/of/mail" in Cygwin, but doing an echo test > /home/of/mail/test:file didn't work I'm thinking about ext2fs, but I need an ext2 partition somewhere. Can I make a file into a partition somehow? I don't want to start modifying my hard drive's partition table. Besides, does anyone know if ext2fs will support colons in filenames?

    Read the article

  • SQL Server 2005 Default Backup Plan

    - by tylerl
    I noticed that a newly imported database on SQLServer 2005 had configured itself (without my knowledge) to perform daily backups; but it's not deleting old files and quickly filling up the disk. I don't know how the backup job got configured (maybe that's something that gets transferred when you move a database?) but I'm having trouble modifying it. The backup runs as part of SQL Server Agent job called "Daily Backups". This job runs a package called "(SSIS Packages)\Maintenance Plans\Backup Plan" -- which I can't find. The "Management\Maintenance Plans" area for my server is empty. I imagine I could delete the existing plan and re-create it manually, but I was hoping to just modify what was already there, since all that's missing is deleting old files.

    Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >