Search Results

Search found 44910 results on 1797 pages for 'breadth first traversal'.

Page 219/1797 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

  • Difference in behavior of reboot

    - by LinuxPenseur
    Hi, I have 2 machines running linux. In one machine, the reboot command is an executable normally found in all linux distributions. In the second machine the reboot command is a shell script customized using some other hardware tool commands to reboot the system. One behavior difference between the 2 machines is that when i execute reboot command on the first machine, it shows another shell prompt and then only reboots. But in the case of second machine, it reboots without showing a shell prompt. I expect the second machine to behave the same way as first machine when reboot command is given. Currently i am analyzing the source code of shutdown.c and halt.c normally found in linux distributions, so that i can find out the implementation which produces the shell propmt on reboot and use that in the shell script in second machine. Kindly give me some pointers on where i should start looking to find the implementation. Thanks

    Read the article

  • Windows Server 2003 Standard R2 CD 1 cannot boot: freeze at No Emulation

    - by TGP1994
    Hi everyone. I've been interested in the Windows Server line of OSes, so since I apply for DreamSpark, I thought I'd go download it and try it. I just so happened to have an old desktop that I was using awhile ago for Windows XP, so I imaged the drive in preparation for it to be overwritten with the new OS. (This system has an Asus A7V8X-X motherboard, an AMD Athlon XP 2800+ processor, and 1GB of RAM.) I tried burning the first disk image on my newer desktop computer, running Windows XP, although the CD burner consistently failed at a particular track area from cd to cd, so it seemed like the burner was toast there. Fortunately, I had a laptop, so I transferred the images over to that, then burned the first disc there. First time around went great, and the burning program reported no errors. I then took the CD over to the computer that I was intending to install Server onto, set the BIOS to boot from the CD drive, then I booted it up. Like normal, after the POST, it printed "Boot from ATAPI CD-Rom: No Emulation", which I was used to seeing with bootable cds. I waited for the "Press any key to continue..." message that I had become so familiar with in windows discs, although I saw none. The computer sat there for about 5 seconds with the cd spinning, then it spun down like it was done reading it. Nothing else happened. No response from the keyboard. I tried again, same result. I then downloaded IMGBurn, and I put the burned cd into the laptop that burned it originally. I also downloaded a fresh image from the dreamspark site. I ran a verify session, and everything checked out. I later tried getting various DOS startup discs, then I tried booting the winnt binary, which supposedly initiates the installation process. Either the shells reported that not enough memory was available (since they would be running in low memory mode), or FreeDOS in particular would report Illegal instructions right away. Is the image corrupt at dreamspark, or am I doing something wrong?

    Read the article

  • FreeNAS: Can't access shares on a windows 7

    - by rzlines
    I have just setup a FreeNAS server. I have formatted and added a second hard drive. And mounted the data partition of the first hard drive. I have enabled CIFS and added both the hard drives to the shares. My workgroup is default WORKGROUP, I can see other computers on my network. I can access freenas through my browser that's how I configured it. Got one more question do I need to mount my second drive, if I do what partition number do I put, as it keeps giving me the error of using the wrong partition. Also my second drive doesn't show up on the home page as available as I can only see my first drive's space there.

    Read the article

  • Folders disappear every timeWindows XP starts up

    - by Reebz
    Whenever my Windows XP machine starts up, subfolders disappear from the first top-level folder, listed alphabetically (eg. from "C:\AA Backups"). The first time it happened I suspected user error (such as an unintentional delete or copy). But I then found it happens on every start-up, sometimes affecting huge numbers of files. Renaming the affected folder (eg to "ZZ Backups") just means that a different folder is affected the next time. Avast found no virus or malware that would seem to be responsible. The missing files are not visible to an undelete utility such as NTFSUndelete. Running "chkdsk/f" found no problems and did not fix the problem. File permissions also appear corrupted - a few files which should be accessible are missing "read" permission. What's happened to this machine?? Any ideas or reports of similar experiences would be most welcome.

    Read the article

  • Cross-match a number of worksheets to one master worksheet

    - by Carter
    Hopefully the title is not too confusing. Basically, I have a master list of addresses and those addresses are listed in multiple columns (Column A - street number, Column B - street name, Column C - street type etc) and I get a another set of addresses on a daily basis with the same address formatting. What I need to do is cross-match the daily changing list of addresses to the first list to remove any matching entries. So, for example, if the first list has 123 Main St on it, I have to ensure that there are no entries of 123 Main St on any subsequent daily lists. I'm using one address as an example but the lists contain upwards of 10000 addresses that have to be cross matched. I don't need them flagged or highlighted, just deleted from the daily lists (though if they have to be flagged or highlighted, I could work with that) Any help here would be much appreciated.

    Read the article

  • HP Officejet 7410 AIO: Scanning/copying output is a solid black field

    - by William
    I recently tried to breathe some life back into an old Officejet 7410 for my parents. The printing is fine, but the scanning and the copying respectively produce images and copies that are mostly solid black, except for the first inch or so from the top of the original page. At first I thought this was a bulb problem, so I replaced it. Unfortunately, the problematic behavior is still there. I've tried resetting to factory defaults. Still no improvement. I don't think this is related to my OS or drivers, since the copying is also affected even when the connected computer is powered off. So... my question(s): What is the cause of this bad behavior? Given that, can my Officejet be repaired? If so, how? Thanks in advance.

    Read the article

  • Windows XP, USB-Stick and multiple Partitions

    - by Bobby
    Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

    Read the article

  • Is it possible to have Grub2's boot.img in the MBR and have it load core.img from a separate boot pa

    - by wesley
    I have a multiboot system that I would like to use Grub to manage. The version of Grub shipping with my Linux distro is Grub2, and it installs its equivalent of stage 1.5-2, core.img, into the remaining sectors on the first track after the MBR but before the first partition. Unfortunately, those sectors are needed by another program. I have a separate primary /boot partition. If I could only keep boot.img as my MBR but have it look in the /boot partition for core.img rather than the embedded one in the sectors immediately following the MBR, everything would work fine. Is this possible with grub2?

    Read the article

  • Any way to stop VMWare workstation from dropping SSH connections?

    - by oljones
    I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

    Read the article

  • Is Page-Loading Time Relevant?

    - by doug
    Take this (ServerFault) page for instance. It has about 20 elements. When the last of these has loaded, the page is deemed "loaded"--but not before. This is certainly the protocol used by our testing service (which is among the small group of well-known vendors that offer that sort of service). Obviously this method is based on a clear, definite endpoint--therefore it's easy to apply w/ concomitant reliability. I think it's also the metric used by the popular Firefox plugin, 'YSlow.' For my employer's website, nearly always the last-to-load items are tracking code, tracking pixels, etc., so from the user's point of view--their perception--the page was "loaded" well before it had actually loaded based on the criterion used by our testing service (15-20% is a rough estimate). I'm sure i'm not the first person to consider this nor the first to wonder if it is causing micro-optimization while ignoring overall system-level, or user-perceived performance. So my question is, are there are other more practical (yet still reasonably precise) measures of page loading time?

    Read the article

  • Install Windows XP/7 without a CD drive when the BIOS does not support booting from USB devices

    - by David Pearce
    I have a computer that has a dead CD drive in it and it seriously needs a new installation of Windows (XP is on it now, but Windows 7 does not sound that bad). At first I tried making a bootable USB drive, but it does not look like the BIOS supports booting directly from a USB drive. Is there some sort of boot loader that I can put onto the hard drive first and boot from the USB drive using that? If not, how else can I re-install Windows on the computer? Edit: The only bootable device the computer has it the network with PXE (although I have no idea how to do that) and it's three internal hard drives

    Read the article

  • MySQL Cluster Failover doesn't work

    - by Lukasz
    I have two servers, where First server 10.100.15.150: 1. one mgm server 2. one ndbd 3. one mysql api Second server 10.100.15.160: 1. one ndbd 2. one mysql api When i start all 'parts' of cluster it looks : Cluster Configuration [ndbd(NDB)] 2 node(s) id=21 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17, Nodegroup: 0) id=22 @10.100.15.160 (mysql-5.1.56 ndb-7.1.17, Nodegroup: 0, Master) [ndb_mgmd(MGM)] 1 node(s) id=3 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17) [mysqld(API)] 2 node(s) id=11 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17) id=12 @10.100.15.160 (mysql-5.1.56 ndb-7.1.17) When i shutdown first machine - 10.100.15.150, on second the nbdb process also has been shutdown so i cannot use this data node and cluster fail ... How i must configure this cluster to get FailOver working ? Thx

    Read the article

  • Time randomly changing itself, internet randomly dying

    - by Vee
    Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

    Read the article

  • How to delete specific columns from all excel workbooks in a particular folder

    - by Firee
    I have a folder in which I have about 30 excel files. In each of these files, I need to delete about 20 specific columns. Here are some details: I am using Excel 2013 The columns are in the first sheet of the excel file. each file can have several sheets, but the columns that need to be deleted are in the first sheet. Here are the names of the columns but please note, the columns are sometimes repeated: Heather National Light General Louisa Terruin Would love some help.

    Read the article

  • Squid on windows loadbalancing only to one server

    - by Martin L.
    After thousands of googles and trying days i cant get the load balancer/failover in squid on windows to work. Iam using squid 2.7. My webservers are 2 single NIC lighttpd and one dual nic lighttpd. server1 in this example is running squid on port 80 and lighttpd on port 8080 (just to test) Requirements: All 3 webservers running lighttpd should be balanced two option for load balancing: Best would be if server1 is busy server2 takes over, if server2 is busy server3 takes over, etc.. Round robin style evenly distributed load. Eg server1 takes first call, server2 second etc.. All requests should be treated the same way (no url rewriting or so on) Sent host headers have to be redirected to every server as http host header, speaking of "server1", "server1.company.internal" and "10.211.1.1". My approach: acl all src all acl manager proto cache_object http_port 80 accel defaultsite=server1.company.internal vhost #reverse proxy entries cache_peer 10.211.2.1 parent 8080 0 no-query originserver round-robin login=PASS name=server1_nic1 cache_peer 10.211.1.2 parent 80 0 no-query originserver round-robin login=PASS name=server2_nic1 cache_peer 10.211.2.3 parent 8080 0 no-query originserver round-robin login=PASS name=server3_nic1 cache_peer 10.211.2.4 parent 8080 0 no-query originserver round-robin login=PASS name=server3_nic2 #decl of names of squid host acl registered_name_hostdomain dstdomain server1.company.internal acl registered_name_host dstdomain server1 #ip of squid host acl registered_name_ip dstdomain 10.211.2.1 # access: redirects the correct squid hostname http_access allow registered_name_hostdomain http_access allow registered_name_host http_access allow registered_name_ip http_access deny all cache_peer_access server1_nic1 allow registered_name_hostdomain cache_peer_access server1_nic1 allow registered_name_host cache_peer_access server1_nic1 allow registered_name_ip cache_peer_access server2_nic1 allow registered_name_hostdomain cache_peer_access server2_nic1 allow registered_name_host cache_peer_access server2_nic1 allow registered_name_ip cache_peer_access server3_nic1 allow registered_name_hostdomain cache_peer_access server3_nic1 allow registered_name_host cache_peer_access server3_nic1 allow registered_name_ip cache_peer_access server3_nic2 allow registered_name_hostdomain cache_peer_access server3_nic2 allow registered_name_host cache_peer_access server3_nic2 allow registered_name_ip cache_peer_access server1_nic1 deny all cache_peer_access server2_nic1 deny all cache_peer_access server3_nic1 deny all cache_peer_access server3_nic2 deny all never_direct allow all Problems: Load balancer does not load balance other than to first server. Only if the first server is killed in any way the second will take over. I have seen the others working at some point, but definitely not as the intended load balancing described above. If the cache_peer_access is not defined sometimes the wrong hostname is sent to the backend webserver and this always depends on the defaultsite= parameter. Probably because the host header on the request to squid is not set and its replaced by defaultsite. Leaving out defaultsite didnt solve the problem. The only workaround i found for this is the current approach with cache_peer_access. Questions: Does the cache_peer_access influence the round-robin? Is there a better workaround to pass the host header to the backed webservers? Which parameters do increase the speed of load balancing or does anyone have a better approach? -Martin

    Read the article

  • Keyboard layout to shift wasd keys

    - by Joel Coehoorn
    I like to play video games on my computer. One of the things that bugs me, though, is how the wasd keys became the standard movement keys in first person shooters and mmorpgs. To me, esdf makes a lot more sense, because that matches your normal hand placement for typing. "Fixing" that layout is always the first thing I do when installing a new game. Sadly, this is often a pain in the neck, and some games won't let you do it at all. Is there an alternative keyboard layout you can install that will just switch these around, so the wasd keys fall in the esdf positions? And is low-level enough two work with DirectX/DirectInput, perhaps that works with the language bar for easy swapping back and forth?

    Read the article

  • Multiple SSL on same IP [closed]

    - by kadourah
    Possible Duplicate: Multiple SSL domains on the same IP address and same port? I have the following situation: first domain: test.domain.com IP: 1.2.3.4 Port: 443 SSL: Purchased from godaddy and specific to that domain Works fine no issues. I would like to add another site: test2.domain.com IP: the same Port: can be different SSL: different since I can't use the SSL above because it's specific to the site above. Now, when I add the HTTPS binding to the second site with IP:Port combination it appears to always load the first SSL ignoring the second certificate. How can I add second SSL binding to the same IP using a "different" certificate? Can this be done?

    Read the article

  • can't send with postfix but I can whith one user

    - by CvR_XX
    I have a postfix and dovecot server but when i try to send an email i get an time -out. Im trying to send with the email [email protected]. A telnet session isn't helping much ether. I get a blank screen. Local it's working fine. My smtp service is running on treadity.com:25. The strange thing is that the logs are completely empty with any info regarding sending emails. Receiving is working alright. Another strange thing is that i've send some message's and that it worked. But that is only with one email. I can still send from that account but other emails are failing any idea's? config file: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes smtpd_tls_auth_only = yes #Enabling SMTP for authenticated users, and handing off authentication to Dovecot smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes 1,1 Top

    Read the article

  • Copying partial cell to another cell in OpenOffice Calc

    - by Justin
    Cell A1 says 0001 John Smith Cell A2 says 0002 Bill Snyder I want to basically split this, so one column just shows the numbers (0001, 0002, etc.) and then another column just shows the name. The first part is easy. Using the function "=LEFT(A1;4)" I can get 0001. How can I grab the name? Using "RIGHT(A1;99)", for example, will grab the entire string "0001 John Smith". Since each name is different in length, I'm not sure what to do. Can I somehow tell it to grab the whole string EXCEPT the first 4 characters? Or somehow tell it to grab the last 2 WORDS instead of a number of characters like it's asking?

    Read the article

  • Can I create a virtual network interface to connect to a real network device?

    - by michelemarcon
    I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

    Read the article

  • nginx connection reset

    - by Steve
    When first visiting my site after not visiting it for a few minutes, the connection is "reset" 100% of the time. I get this message when debug is turned on, along with a 400 bad request status message: client prematurely closed connection while reading client request line I've read that this could be caused by large_client_header_buffers setting. I have google analytics on my site. Using live http headers, I get this as the request: `GET /__utm.gif?utmwv=5.3.7&utms=35&utmn=745612186&utmhn=domain.com&utmcs=UTF-8&utmsr=1920x1080&utmvp=1841x903&utmsc=24-bit&utmul=en-us&utmje=1&utmfl=11.4%20r402&utmdt=2006Scape%20Forums%20-%20General&utmhid=2004697163&utmr=0&utmp=%2Fservices%2Fforums%2Fboard.ws%3F3%2C4&utmac=UA-25674897-2&utmcc=__utma%3D68455186.1647889527.1351640625.1352446442.1352451659.100%3B%2B__utmz%3D68455186.1352097329.64.2.utmcsr%3Ddomain.com%7Cutmccn%3D(referral)%7Cutmcmd%3Dreferral%7Cutmcct%3D%2Fservices%2Fforums%2Fboard.ws%3B&utmu=q~ HTTP/1.1 my large_client_header_buffers in nginx is set to 4 8k, so I don't know if this is the problem. Immediate requests have the first "reset" request are all successful.

    Read the article

  • Deleting Time Machine in Mac OS X 10.6.4

    - by cappuccino
    Does anyone know how to delete Time Machine in Mac OS X 10.6.4? Before answering: sudo rm -rf /whateverthetimemachineis does not work Disabling the ACL permissions first with sudo fsaclctl -p /whatever -d does not work, sudo: fsaclctl: command not found Use the delete all backup feature in Time Machine... this is slow as hell, would take days. Need a command line solution. No I don't want to reformat the drive, I have other content on it, and no don't say I should have separated on two partition or two drives, I did it this say since partitions cannot be dynamically changed, and two drives is annoying since, whats the point of having a big drive?... plus has no relation to the issue at hand. Already googlied for hours and read everything on Super User, nothing working. and all solutions are the first 4. Any clues?

    Read the article

  • How to clear contents of cell in Excel?

    - by Ken
    I've been sent an Excel spreadsheet with a weird first row. Some of the cells say "Column1", "Column2", etc., but I can't delete their contents. If I select the cell and hit backspace, it goes blank, but when I press return, it goes right back to saying "Column1". I found another answer here that suggested this could be caused by "Cell validation", but the validation window says "Any value", and also "show alert" (and I'm not seeing an alert), so I don't think that's it. The first row is white text on a blue background, if that means anything. The spreadsheet was sent to me in XLSX format, but I tried resaving as XLS and opening that, and it seems to make no difference. This is with the "ribbon" version of Excel (they got rid of the Help menu so I don't know how to see what version number it is!). Thanks!

    Read the article

  • Battery won't charge and BSOD: DRIVER_POWER_STATE_FAILURE

    - by JamesGecko
    I have a Dell Vostro 1510 running Windows 7. Today when I pulled my machine out of it's bag and plugged it in, the little battery light on the side blinked constantly instead of staying solid, and Windows showed a message that the battery was not charging. The battery is 3.5 years old, but it can still hold the machine in standby overnight, so I don't know why it won't charge anymore. After I have had the machine on for a while (20 minutes the first time, 40 minutes the second time), it shows a blue screen of death with the message DRIVER_POWER_STATE_FAILURE and reboots. I can deal with the battery being dead, but not with blue screens of death. Does anyone know how to fix it? Edit: Potentially relevant, this started happening after an OS update was automatically installed on Friday and Windows started nagging to reboot. The first BSOD was before the reboot; the update made a lot of registry changes when the machine came up, and the second BSOD was 40 minutes later.

    Read the article

  • Proxy service likes Apache Http

    - by Aptos
    Currently I try to simulate my app as distributed servers, so I let them run on localhost:9000 and localhost:9001, i tried using apache load balancer but it is really hard to config on mac, my idea is the second server localhost:9001 will be kept ideal and the requests only be redirected to them when the first server is downed. Is there any good free program can do that ? (except Apache httpd). Extra functions: my application is written in java and maintain an in-memory object, is there any service that can synchronize that object between 2 servers so they can keep uptodate status of other (the second one takes state of the first one)? Is there any app can support that? Thank you very much.

    Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >