Search Results

Search found 23674 results on 947 pages for 'custom action'.

Page 22/947 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• ASP.Net partially ignoring my Custom error section in web.config

  - by weevie

  Here's my web.config customErrors section (you'll notice I've switched the mode to 'On' so I can see the redirect on my localhost): <customErrors defaultRedirect="~/Application/ServerError.aspx" mode="On" redirectMode="ResponseRewrite"> <error statusCode="403" redirect="~/Secure/AccessDenied.aspx" /> </customErrors> and here's the code that throws: Catch adEx As AccessDeniedException Throw New HttpException(DirectCast(HttpStatusCode.Forbidden, Integer), adEx.Message) End Try and here's what I end up with: Which is not my pretty AccessDenied.aspx page but it is a forbidden error page so at least I know my throw is working. I've removed the entry for 403 in IIS (7.0) as a desperate last attempt and unsuprisingly that made no difference. I've run out of ideas now so any suggestions will be gratefully appreciated!

  Read the article

• Custom routes/paths/roads on Google Maps

  - by Douglas

  Hey guys. I need to know, and as quickly as possible, if what I need is achievable. I need to be able to, using either V2 OR V3 (preferably 3), create paths which ignore buildings in a sense. I was trying to create even a kml file to draw out all of the paths myself, and then find some way to turn them on/off as needed. For example. The user wants to go from point A to point B. Between these points is a number of buildings. The user physically CAN walk through these buildings(it's a campus). I want to show them that on the map. This way you don't have to do a loop-de-loop around, say, a parking lot, just to get to the other end of it. If there is ANY way AT ALL to do this, I'd love to know. An example of what I require can be found here: http://www.uottawa.ca/maps/ It's all pre-determined paths based on the two inputs from the user into the dropdown menu. I can plainly see this. But I have no clue if a) this can be done in v3, and b) how on earth they did it themselves. Assistance required, and greatly appreciated!

  Read the article

• HTML custom tags: pros & cons

  - by o_O Tync

  I'd like to use some semantic HTML tags instead of <div>s: <article>, <product>, <footer> etc. Some of them are already presented in the upcoming HTML5, however, it's not fully supported. Which are the possible cons I might face when Rendering? Using CSS, JS? The one I remember is: IE6 can't clone tags it doesn't know.

  Read the article

• How to create custom exception handler for custom controls or extension methods.

  - by Shantanu Gupta

  I am creating an extension method in C# to retrieve some value from datagridview. Here if a user gives column name that doesnot exists then i want this function to throw an exception that can be handled at the place where this function will be called. How can i achieve this. public static T Value<T>(this DataGridView dgv, int RowNo, string ColName) { if (!dgv.Columns.Contains(ColName)) throw new ArgumentException("Column Name " + ColName + " doesnot exists in DataGridView."); return (T)Convert.ChangeType(dgv.Rows[RowNo].Cells[ColName].Value, typeof(T)); }

  Read the article

• BizTalk 2009 - Custom Functoid Wizard

  - by StuartBrierley

  When creating BizTalk maps you may find that there are times when you need perform tasks that the standard functoids do not cover.  At other times you may find yourself reapeating a pattern of standard functoids over and over again, adding visual complexity to an otherwise simple process.  In these cases you may find it preferable to create your own custom functoids.  In the past I have created a number of custom functoids from scratch, but recently I decided to try out the Custom Functoid Wizard for BizTalk 2009. After downloading and installing the wizard you should start Visual Studio and select to create a new BizTalk Server Functoid Project. Following the splash screen you will be presented with the General Properties screen, where you can set the classname, namespace, assembly name and strong name key file. The next screen is the first set of properties for the functoid.  First of all is the fuctoid ID; this must be a value above 6000. You should also then set the name, tooltip and description of the functoid.  The name will appear in the visual studio toolbox and the tooltip on hover over in the toolbox.  The descrition will be shown when you configure the functoid inputs when using it in a map; as such it should provide a decent level of information to allow the functoid to be used. Next you must set the category, exception mesage, icon and implementation language.  The category will affect the positioning of the functoid within the toolbox and also some of the behaviours of the functoid. We must then define the parameters and connections for our new functoid.  Here you can define the names and types of your input parameters along with the minimum and maximum number of input connections.  You will also need to define the types of connections accepted and the output type of the functoid. Finally you can click finish and your custom functoid project will be created. The results of this process can be seen in the solution explorer, where you will see that a project, functoid class file and a resource file have been created for you. If you open the class file you will see that the following code has been created for you: The "base" function sets all the properties that you previsouly detailed in the custom functoid wizard.  public TestFunctoids():base()  {    int functoidID;    // This has to be a number greater than 6000    functoidID = System.Convert.ToInt32(resmgr.GetString("FunctoidId"));    this.ID = functoidID;    // Set Resource strings, bitmaps    SetupResourceAssembly(ResourceName, Assembly.GetExecutingAssembly());    SetName("FunctoidName");                     SetTooltip("FunctoidToolTip");    SetDescription("FunctoidDescription");    SetBitmap("FunctoidBitmap");    // Minimum and maximum parameters that the functoid accepts    this.SetMinParams(2);    this.SetMaxParams(2);    /// Function name that needs to be called when this Functoid is invoked.    /// Put this in GAC.    SetExternalFunctionName(GetType().Assembly.FullName,     "MyCompany.BizTalk.Functoids.TestFuntoids.TestFunctoids", "Execute");    // Category for this functoid.    this.Category = FunctoidCategory.String;    // Input and output Connection type    this.OutputConnectionType = ConnectionType.AllExceptRecord;    AddInputConnectionType(ConnectionType.AllExceptRecord);   } The "Execute" function provides a skeleton function that contains the code to be executed by your new functoid.  The inputs and outputs should match those you defined in the Custom Functoid Wizard.   public System.Int32 Execute(System.Int32 Cool)   {    ResourceManager resmgr = new ResourceManager(ResourceName, Assembly.GetExecutingAssembly());    try    {     // TODO: Implement Functoid Logic    }    catch (Exception e)    {     throw new Exception(resmgr.GetString("FunctoidException"), e);    }   } Opening the resource file you will see some of the various string values that you defined in the Custom Functoid Wizard - Name, Tooltip, Description and Exception. You can also select to look at the image resources.  This will display the embedded icon image for the functoid.  To change this right click the icon and select "Import from File". Once you have completed the skeleton code you can then look at trying out your functoid. To do this you will need to build the project, copy the compiled DLL to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions and then refresh the toolbox in visual studio.

  Read the article

• Newbie question: Creating a custom control

  - by Wild Thing

  Hi, I have an ASP.Net site, in which I am using a ListView with a Datapager. Apparently there is a bug with the Datapager, where it crashes if there is an empty ampersand (&) in the querystring. This is a known issue: https://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=357344&wa=wsignin1.0#tabs I see that there is a workaround given, but did not understand how to implement it. Can somebody point me in the right direction? Also, I see that this issue is marked as resolved. Any idea where I can find the updated version of this control? Wild Thing

  Read the article

• iphone tabbar with custom buttons and scrollvie

  - by chunjai

  i'm trying to get a tab bar effect not unlike russel quinn's 'creative review' app. the tabbar swipes across, which i have figured out, but the tabbar style itself is unlike anything i've seen on the iphone (though it looks so simple!). it has square buttons with a space between, and each button has a select/active/inactive state. i'm having a hard time seeing how this can be tabbar, but i don't know any other way. can someone explain this? here's the example :: http://bit.ly/c8CeBC. any help is appreciated.

  Read the article

• custom grid style in silverlight 4

  - by Archie

  Hello, I want to set background of a grid using a style. I style I'm setting the Background Property of the grid. But I have a border filled with LinearGradientFill and a Path which also has LinearGradientFill in it. But I'm not able to combine both. Below is sample code. I want to create it as a style. <Grid> <Border BorderBrush="Black" BorderThickness="2"> <Border.Background> <LinearGradientBrush EndPoint="1,0.5" StartPoint="0,0.5"> <GradientStop Color="Black" Offset="0.953" /> <GradientStop Color="White" Offset="0" /> </LinearGradientBrush> </Border.Background> </Border> <Path Data="M 0,0 C 0,620 10,10 560,0" Height="60" VerticalAlignment="Top"> <Path.Fill> <LinearGradientBrush EndPoint="1,0.5" StartPoint="0,0.5"> <GradientStop Color="Black" Offset="0" /> <GradientStop Color="White" Offset="0.779" /> </LinearGradientBrush> </Path.Fill> </Path> </Grid> It gives me an error as The Property 'Value' is set more than once. Can anyone help me with it? Thanks.

  Read the article

• J2EE: Default values for custom tag attributes

  - by Nick

  So according to Sun's J2EE documentation (http://docs.sun.com/app/docs/doc/819-3669/bnani?l=en&a=view), "If a tag attribute is not required, a tag handler should provide a default value." My question is how in the hell do I define a default value as per the documentation's description. Here's the code: <%@ attribute name="visible" required="false" type="java.lang.Boolean" %> <c:if test="${visible}"> My Tag Contents Here </c:if> Obviously, this tag won't compile because it's lacking the tag directive and the core library import. My point is that I want the "visible" property to default to TRUE. The "tag attribute is not required," so the "tag handler should provide a default value." I want to provide a default value, so what am I missing? Any help is greatly appreciated.

  Read the article

• Custom Message Box in WPF - What project type?

  - by Tony

  I have a WPF Composite application and I want to create a customized messagebox, I wondered what project type I should use to create it? A usercontrol A WPF Application A Class Library I have to then be able to use this MessageBox in other places in my application.

  Read the article

• AutoRestart Custom Shell App

  - by MattH

  We have a .Net application that runs as a shell for certain users. We'd like the application to automatically restart when it crashes. The application is set as the shell here: HKEY_USERS*User*\Software\Microsoft\Windows NT\WinLogon\Shell I've tried adding an "AutoRestartShell" key with a value of "1", like what exists in: HKLM\Software\Microsoft\Windows NT\WinLogon. When I kill the application's process for the user (via RDP) the application exits, but never restarts. Ideas?

  Read the article

• Drupal : Custom views filter

  - by Joseph

  Hi, First thing I would say is that I am a Drupal newbie. So, I would appreciate your answer in a detailed step by step process. I am using Drupal 6 and location module. There are two main content types - user profile (using content profile module) and event content type. Both have one field for location. Now, lets suppose in his profile, user is selecting city as Toronto and province as Ontario. And some events have been added for Toronto city. I need one Views, which will display events from user city. So, if user is from Vancouver, and they click on "my city events", they will see list of events from their city. Someone told me that I can achieve this using arguments/ relationships, but I don't know how to do that. Can someone please help me out? I am not good at PHP either :(

  Read the article

• Adding custom validator without using Zend_Form's addElementPrefixPath

  - by nush

  The problem is that I don't use Zend_Form, so I can't use the built in capabilities. I usually look for three things when setting a validator: - its path (usually in library/path/validators/MyValidator.php) - its class name (tried Validators_MyValidator) and - in application.ini, the autoloaderNamespaces[] = "Validators" I've tried different settings/namings/layouts to no avail. When using a validator in my Zend_Validate_Input, an exception occurs, saying that it couldn't find my plugin/validator, the classes being searched only in Zend/Validate with the Zend_Validate prefix (I didn't try this prefix, though). Wasn't there a setting in app.ini that added a prefix and a path?

  Read the article

• [X]HTML custom tags: pros & cons

  - by o_O Tync

  I'd like to use some semantic [X]HTML tags instead of <div>s: <article>, <product>, <footer> etc. Some of them are already presented in the upcoming HTML5, however, it's not fully supported. Which are the possible cons I might face when Rendering? Using CSS, JS? The one I remember is: IE6 can't clone tags it doesn't know.

  Read the article

• Access Page property from ASP.NET custom control

  - by Farinha

  How do I access a base page property from a UserControl that is part of that page?

  Read the article

• Magento and unsetting a custom boolean attribute

  - by Spongeboy

  Hi, I've added an attribute to a customer address entity. Attribute setup code is as follows- 'entity_type_id'=>$customer_address_type_id, 'attribute_code'=>'signature_required', 'backend_type'=>'int', 'frontend_input'=>'boolean', 'frontend_label' => 'Signature required', 'is_global' => '1', 'is_visible' => '1', 'is_required' => '0', 'is_user_defined' => '0', I have then - added attribute to model\entity\setup.php added a HTML field on the edit form I am now getting the attribute saved to the database when the checkbox is checked. However, it is not being unset when checkbox is unchecked (I'm guessing due to checkbox input not being 'post'-ed if unchecked. What is the best way to uncheck this? Should I add a default value of 0? Or unset/delete the attribute before save in the controller? Should I add get/set methods to the model?

  Read the article

• Blackberry - custom logic for checkboxes group

  - by SWATI

  if i click on any checkbox all previous checkboxes must get checked "my logic works" if i uncheck a checkbox then all checkboxes after it must get unchecked "how to do that" MyLogic works for storm but not for other models what to do //well what i want to do is i have 5 checkboxes class myscreen { chk_service = new CheckboxField[5]; chk_service[0]= new CheckboxField("1",true) chk_service[1]= new CheckboxField("2",false) chk_service[2]= new CheckboxField("3",false) chk_service[3]= new CheckboxField("4",false) chk_service[4]= new CheckboxField("5",false) CheckboxFieldChangeListener obj = new CheckboxFieldChangeListener(chk_service); chk_service[0].setChangeListener(obj); chk_service[1].setChangeListener(obj); chk_service[2].setChangeListener(obj); chk_service[3].setChangeListener(obj); chk_service[4].setChangeListener(obj); hm4 = new HorizontalFieldManager(); hm4.add(chk_service[0]); hm4.add(chk_service[1]); hm4.add(chk_service[2]); hm4.add(chk_service[3]); hm4.add(chk_service[4]); add(hm4); } public CheckboxFieldChangeListener (CheckboxField[] arrFields) { m_arrFields = arrFields; } public void fieldChanged(Field field, int context) { if(true == ((CheckboxField) field).getChecked()) { for(int i = 0; i < m_arrFields.length; i++) { if(m_arrFields[i]==field) { //a[j]=i; j++; break; } else { CheckboxField oField = m_arrFields[i]; oField.setChecked(true); } } } a[k] = j; if(false == ((CheckboxField) field).getChecked()) { for(int i =field.getIndex(); i < m_arrFields.length; i++) { if(m_arrFields[i]==field) { //a[j]=i; j++; break; } else { CheckboxField oField = m_arrFields[i]; oField.setChecked(false); } } } } }

  Read the article

• ActionScript Custom Class With Return Type?

  - by TheDarkIn1978

  i just know this is a dumb question, so excuse me in advance. i want to essentially classify a simple function in it's own .as file. the function compares integers. but i don't know how to call the class and receive a boolean return. here's my class package { public class CompareInts { public function CompareInts(small:int, big:int) { compare(small, big); } private function compare(small:int, big:int):Boolean { if (small < big) return true; else return false; } } } so now i'd like to write something like this: if (CompareInts(1, 5) == true). or output 'true' by writing trace(CompareInts(1, 5));

  Read the article

• as3 custom functions

  - by pixeltocode

  why is it that every time moveSlide() is called, the values traced are the same? var slideWidth:Number = 680; var newPos:Number; function moveSlide () { var currentPos:Number = image_holder.x; newPos = currentPos + slideWidth; trace('currentPos ' + currentPos); trace('newPos ' + newPos); } moveSlide(); moveSlide(); moveSlide(); (image_holder is a movieclip with the images)

  Read the article

• 550 Requested action not taken: mailbox unavailable on OS X server 10.6

  - by Marc Graham

  I recently added a new domain to my mail server. I have 1 main server mail.example.com and several others that have the mx record pointing to mail.example.com. My two new domains have the mx record set correctly. The issue I am experiencing is the 550 Requested action not taken: mailbox unavailable error but only when I send emails to accounts on the new urls from an external email account such as gmail. If i send an email to one of the newly made email addresses with the new url from an email account within the same server it delivers normally. For example.... sending [email protected] to [email protected] receives 550 error sending [email protected] to [email protected] works normal here is a report from wormly.com with server and account names changed for obvious reasons Resolving hostname... Connecting... SMTP -> FROM SERVER: 220 existingmailserver.com ESMTP Service ready SMTP -> FROM SERVER: 250-Requested mail action okay, completed 250-SIZE 0 250-AUTH LOGIN PLAIN CRAM-MD5 250-ETRN 250-8BITMIME 250 OK MAIL FROM: [email protected] SMTP -> FROM SERVER: 250 Requested mail action okay, completed RCPT TO: [email protected] SMTP -> FROM SERVER: 550 Requested action not taken: mailbox unavailable SMTP -> ERROR: RCPT not accepted from server: 550 Requested action not taken: mailbox unavailable Message sending failed.

  Read the article

• General directions on developing a server side control system for JS/Canvas Action RPG

  - by Billy Ninja

  Well, yesterday I asked on anti-cheat JS, and confirmed what I kind of already knew that it's just not possible. Now I wanna measure roughly how hard it is to implement a server side checking that is agnostic to client input, that does not mess with the game experience so much. I don't wanna waste to much resource on this matter, since it's going to be initially a single player game, that I may or would like to introduce some kind of ranking, trading system later on. I'd rather deliver better more cool game features instead. I don't wanna have to guarantee super fast server response to keep the game going lag free. I'd rather go with more loose discrete control of key variables and instances. Like store user's action on a fifo buffer on the client, and push that actions to the server gradually. I'd love to see a elegant, generic solution that I could plug into my client game logic root (not having to scatter treatments everywhere in my client js) - and have few classes on Node.js server that could handle that - without having to mirror/describe all of my game entities a second time on the server.

  Read the article

• Monster's AI in an Action-RPG

  - by Andrea Tucci

  I'm developing an action rpg with some University colleagues. We've gotton to the monsters' AI design and we would like to implement a sort of "utility-based AI" so we have a "thinker" that assigns a numeric value on all the monster's decisions and we choose the highest (or the most appropriate, depending on monster's iq) and assign it in the monster's collection of decisions (like a goal-driven design pattern) . One solution we found is to write a mathematical formula for each decision, with all the important parameters for evaluation (so for a spell-decision we might have mp,distance from player, player's hp etc). This formula also has coefficients representing some of monster's behaviour (in this way we can alterate formulas by changing coefficients). I've also read how "fuzzy logic" works; I was fascinated by it and by the many ways of expansion it has. I was wondering how we could use this technique to give our AI more semplicity, as in create evaluations with fuzzy rules such as IF player_far AND mp_high AND hp_high THEN very_Desiderable (for a spell having an high casting-time and consume high mp) and then 'defuzz' it. In this way it's also simple to create a monster behaviour by creating ad-hoc rules for every monster's IQ category. But is it correct using fuzzy logic in a game with many parameters like an rpg? Is there a way of merging these two techniques? Are there better AI design techniques for evaluating monster's chooses?

  Read the article

• 3ds Max error dialog: "Instancing not supported for this action"

  - by monsto

  "Instancing not supported for this action” is the dialog I get. My favorite part is that, according to google and yahoo, apparently i am the only person in the history of mankind to experience these words together in this order, let along get this message from Max. Thanks, autodesk, for putting this dialog in special for me! So I’ve created my model (nws) and was setting up a Skin Wrap. Selected "Face Deformation", added the base-skin for weight, checked “weight all points”. . . clicked “convert to skin” and got that dialog. My model doesn’t have a whole lot of elements to it, I had a left and right appendage that came from a base model (skyrim). so, i did a clonecopy of all 3 of my elements, just to be sure nothing was instanced… and VOILA! Same error message. the only other elements are an imported NIF mesh and skeleton. Any idea where this is coming from or how I can make it go away so that I can export my mesh?

  Read the article

• how to give action to the CCArray which contain bubbles(sprites)

  - by prakash s

  I am making bubbles shooter game in cocos2d I have taken one array in that i have inserted number of different color bubbles and i showing on my game scene also , but if give some move action to that array ,it moving down but it displaying all the bubbles at one position and automatically destroying , what is the main reason behind this please help me here is my code: -(void)addTarget { CGSize winSize = [[CCDirector sharedDirector] winSize]; //CCSprite *target = [CCSprite spriteWithFile:@"3.png" rect:CGRectMake(0, 0, 256, 256)]; NSMutableArray * movableSprites = [[NSMutableArray alloc] init]; NSArray *images = [NSArray arrayWithObjects:@"1.png", @"2.png", @"3.png", @"4.png",@"5.png",@"1.png",@"5.png", @"3.png", nil]; for(int i = 0; i < images.count; ++i) { NSString *image = [images objectAtIndex:i]; // generate random number based on size of array (array size is larger than 10) CCSprite*target = [CCSprite spriteWithFile:image]; float offsetFraction = ((float)(i+1))/(images.count+1); //target.position = ccp(winSize.width*offsetFraction, winSize.height/2); target.position = ccp(350*offsetFraction, 460); // [[CCActionManager sharedManager ] pauseAllActionsForTarget:target ] ; [self addChild:target]; [movableSprites addObject:target]; //[target runAction:[CCMoveTo actionWithDuration:20.0 position:ccp(0,0)]]; id actionMove = [CCMoveTo actionWithDuration:10 position:ccp(winSize.width/2,winSize. height/2)]; id actionMoveDone = [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)]; [target runAction:[CCSequence actions:actionMove, actionMoveDone, nil]]; } } after the move at certain position i want to display all the bubbles in centre of my window

  Read the article

• Architecture of an action multiplayer game from scratch

  - by lcf

  Not sure whether it's a good place to ask (do point me to a better one if it's not), but since what we're developing is a game - here it goes. So this is a "real-time" action multiplayer game. I have familiarized myself with concepts like lag compensation, view interpolation, input prediction and pretty much everything that I need for this. I have also prepared a set of prototypes to confirm that I understood everything correctly. My question is about the situation when game engine must be rewind to the past to find out whether there was a "hit" (sometimes it may involve the whole 'recomputation' of the world from that moment in the past up to the present moment. I already have a piece of code that does it, but it's not as neat as I need it to be. The domain logic of the app (the physics of the game) must be separated from the presentation (render) and infrastructure tools (e.g. the remote server interaction specifics). How do I organize all this? :) Is there any worthy implementation with open sources I can take a look at? What I'm thinking is something like this: -> Render / User Input -> Game Engine (this is the so called service layer) -> Processing User Commands & Remote Server -> Domain (Physics) How would you add into this scheme the concept of "ticks" or "interactions" with the possibility to rewind and recalculate "the game"? Remember, I cannot change the Domain/Physics but only the Game Engine. Should I store an array of "World's States"? Should they be just some representations of the world, optimized for this purpose somehow (how?) or should they be actual instances of the world (i.e. including behavior and all that). Has anybody had similar experience? (never worked on a game before if that matters)

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >