Search Results

Search found 85755 results on 3431 pages for 'new to magento'.

Page 220/3431 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

  • Proliant server will not accept new hard disks in RAID 1+0?

    - by Leigh
    I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

    Read the article

  • CodePlex Daily Summary for Saturday, March 24, 2012

    CodePlex Daily Summary for Saturday, March 24, 2012Popular Releasesmenu4web: menu4web 0.0.3: menu4web 0.0.3Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Indiefreaks Game Framework: 0.9.2.0: Feature: Added SunBurn engine v2.0.18.7 support (doesn't support versions below). Feature: Added GammaCorrection Post processor to allow developers or even players to tweak the Gamma of the game depending on their screen (courtesy of bamyazi) Feature: Added Windows, Xbox 360 & WP7 enabled StorageManager (based on Nick Gravelyn's EasyStorage) to read/write files for player or game data. Feature: Added VirtualGamePad feature for WP7 allowing developers to define Touch areas on screen and mapped...Code for Rapid C# Windows Development eBook + LINQPad and Data Tools: LLBLGen LINQPad Data Context Driver Version 2.1: Sixth release of a LLBLGen Pro Typed Data Context Driver for LINQPad. For LLBLGen Pro versions 3.1 and 3.5(coming). New features:When you switch the query language to SQL, LINQPad updates the Schema Explorer to show SQL column names rather than CLR property names Connection dialog unloads assemblies when it has closed down so they are no longer locked - this allows them to be rebuilt while LINQPad is still open Connection dialog includes a button to quickly add assemblies needed for the...People's Note: People's Note 0.40: Version 0.40 adds an option to compact the database from the profile screen. Compacting a database can make it smaller and faster by removing empty spaces left over by editing, moving, and deleting notes. To install: copy the appropriate CAB file onto your WM device and run it.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Image 3D Viewer: Image 3D Viewer: WPF .Net 3.5 .Net 4 .Net 4.5Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTNew ProjectsAsp.NET Url Router: 1.Url rewritting. 2.Provider regex matcher 3.Support custom url validate handler.BC-Web: ch projectCape: Dynamically generates Capistrano recipes for Rake tasks.cstgamebgs: Project for wp7GCalculator: GCalculator for performing basic arithmetic operations. Windows Sidebar Gadget invacc: Invacc- for inventory and Account Onlineirgsh-node: Worker nodes of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-repo: Repository manager node of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-web: Web interface and task manager of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/Kinect Explorer For SharePoint 2010: Kinect Explorer for SharePoint is a tool which provide Natural User Interface to browse through SharePoint sites. Use body gestures to browse, read, move, copy documents. Use Speech services to read-out the files.MCU: mcu devMVC3ShellCode: MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode NetWatch: NetWatch - network watchdog Small application primary designed for network connectivity monitoring. You can configure set of network tests (ping, http, ...) and time plan for this tests. Application is running in windows notification area and notife you each problem. NMortgage: The goal of this project will be to give a prospective home buyer or an existing home owner the insight they need to explore effects of different repayment strategies or different mortgage structures. Nucleo.NET MVP: The Nucleo MVP framework provides a Model-View-Presenter approach that isn't obtrusive, can be utilized in multiple environments, and is versatile. Providing a lot of features you see in other frameworks, the Nucleo MVP framework provides many extensibility points, pretty much allowing you to rewrite most of the framework. It features dynamic injection support, presenter and view initializers (like what you see in ASP.NET MVC), model property injection, attribute- and convention-based vie...P2PShare: This project is to build a new and moden System for p2p file shearing supporting downloads from HTTP, HTTPS, FTP support for P2Pshare client list servers so files can point to a server or a host only file so no servers are used and only p2p is usedPipeLayer: proyecto de sistemas inteligentespython-irgsh: Python library for BlankOn Package Factory - http://irgsh.blankonlinux.or.id/RamGec XNA Controls - Window Elements Library for XNA Solutions: Lightweight, ultra-high performance and flexible library for displaying and managing Window Controls for XNA system. Features its own Window Designer for creating custom windows and controls.RPG Character Generators and Tools: Various tools for pen and paper style role playing games.Screen scraper: A program that can be used to download public domain MP3 and other media such as pdf documents.SharePoint Bdc request library: The given set of classes simplifies an access to the external data, which can be reached through BDC. The library allows to make simple requests for values from external data source, using a BDC Entity Instance Identifier(s) or a value of a certain BDC Entity field. Developed to interact with Business Data Connectivity of SharePoint 2010.testtom03232012git01: testtom03232012git01testtom03232012git02: testtom03232012git02the north star uc: University projectTyphon: Typhon is a role playing simulation management application, much like Nova, but written in MVC/C#.VRE LabTrove-SharePoint connector: The VRE LabTrove-SharePoint Connector provides a means of integrating the ability to view, post to, and edit posts stored in a LabTrove electronic laboratory notebook from within the familiar environment of Microsoft SharePoint. Once installed and configured, these Web Parts give SharePoint users a straightforward way to interact with any LabTrove installation that they wish to use. They also facilitate users to attach data that is stored in a SharePoint Document Library to the LabTrove posts...

    Read the article

  • What is this jumper for on my new motherboard?

    - by jasondavis
    I am building a new PC, I just got my motherboard in the mail today. It is a ASRock X58 Extreme 3. I am reading over the manual for it and one of the jumpers says this. There is a 3 pin jumper labeled 1 2 3, with pins 1 and 2 shorted by default it is "+5v" If I manually change it to short jumper pins 2 and 3 instead of 1 and 2 then it will be "+5vSB (standby) for PS/2 or USB wake up events. So I am confused as to exactly what this is for. Can someone explain what it means, why I would want one other the other?

    Read the article

  • What does the "Max Memory Size" on the new Intel Core i3 / i5 / i7 CPU's mean?

    - by Josh
    I just noticed in the specs of the new Intel Core i-series processors that there is a "Max Memory Size" that is usually pretty small -- anywhere from 8GB to 24GB. See here: http://ark.intel.com/Product.aspx?id=41316 Core 2-based motherboards were just starting to roll out support for 32GB and greater memory sizes. Anyone have any idea what the Max Memory Size indicates? Is this the total limitation of the on-chip memory controller? Limitation per channel? Limitation per stick (e.g. density??)? Thinking of building a decent machine that needs lots of RAM, so I'm looking at the i7 860.

    Read the article

  • preparing to migrate MOSS 2007 SP1 content into new server with MOSS 2007 SP2 with the same server n

    - by Albert Widjaja
    To All Experts here, I'd like to perform a MOSS server content migration from the existing single instance server (SQL Server 2008, Windows Server 2008, SharePoint 2007 SP1) all in one and by maintaining the server name only, here's what I had in my migration plan document outline: I have created the new Windows Server 2008 R2 + SQL Server 2008 SP1 and MOSS 2007 SP2 after that: Backup MOSS_ContentDB from SQL Server 2008 SSMS (does this enough to cover all top level sites and its content in the library and doc. repository ?) Backup all top level sites from CA site using the CA Sites backup and restore tools. turn off the old MOSSDEV01 (current server) rename the existing server (TempServ01) into MOSSDEV01 (so that the user bookmark and other link inside MOSS site still working) perform restore of the DB restore the site collection and its content from the backup is that the correct way to do it ? I haven't execute the server configuration wizard to create the same port number of the SSP, CA and the SQL Server DB yet. Any idea and suggestion would be greatly appreciated Thanks.

    Read the article

  • How do I use wine's new multi-channel audio support?

    - by Forest
    Wine supposedly added Multi-channel support to the ALSA driver in a recent release. However, I haven't found any documentation about it or any reports of anyone successfully using it. I have 5.1 surround sound through ALSA (not Pulse) on my linux system, yet games in wine don't seem to use anything more than stereo, no matter which ALSA device I select in winecfg. Can someone explain what must be done to get wine games to use all my speakers for positional audio, or failing that, point me toward some useful documentation on the new multi-channel support?

    Read the article

  • How to add new partition to RAID-1 array on Redhat FC10?

    - by Peter Scott
    I have a RH FC10 system with RAID 1 partitions, here is mdadm.conf: # mdadm.conf written out by anaconda DEVICE partitions MAILADDR root ARRAY /dev/md1 level=raid1 num-devices=2 metadata=0.90 UUID=9588bfe1:ddfd5858:1067c814:ac499922 ARRAY /dev/md3 level=raid1 num-devices=2 metadata=0.90 UUID=3895ca46:c1526588:d48acd7e:c153aa83 ARRAY /dev/md4 level=raid1 num-devices=2 metadata=0.90 UUID=ebd4920f:b46c1f18:2eced24a:a21ca861 ARRAY /dev/md2 level=raid1 num-devices=2 metadata=0.90 UUID=048e8198:5d6d9682:d3a1e5c3:d475ad80 ARRAY /dev/md0 level=raid1 num-devices=2 metadata=0.90 UUID=d89ec2de:079d4be5:e00ee8f5:fcb19188 I want to carve off 500MB from md4 to make a new partition (for an AFS cache). I haven't touched mdadm or any other disk partitioning tools in years. md4 is 50GB and less than 10% used. What's the easiest way of doing this?

    Read the article

  • Optimized CSF LFD to miminize false positive emails on new install? Centos6.2 + ISPConfig3

    - by Damainman
    I have a remote dedicated server running CentOS 6.2 x64bit with ISPConfig3. This is a brand new install. Server Purpose: Basic LAMP Web Hosting with PureFTPD, BIND, CLAMAV, RKHunter. Any advice or link to a guide which will clearly explain how to optimize the CSF+LFD configuration is greatly appreciated. I am not exactly sure on where to start what I shouldn't loosen the restrictions on. At the moment my inbox is flooding with alerts from LFD such as: Suspicious process running under user postfix Excessive resource usage: haldaemon Account: haldaemon Resource: Process Time Exceeded: 1823 1800 (seconds) Executable: /usr/sbin/hald Command Line: hald PID: 1031 Killed: No Excessive resource usage: amavis Time: Tue Jun 5 12:43:35 2012 -0700 Account: amavis Resource: Virtual Memory Size Exceeded: 330 200 (MB) Executable: /usr/bin/perl Command Line: amavisd (virgin child) PID: 27931 Killed: No Excessive resource usage: apache Time: Tue Jun 5 12:35:33 2012 -0700 Account: apache Resource: Virtual Memory Size Exceeded: 437 200 (MB) Executable: /usr/sbin/httpd Command Line: /usr/sbin/httpd PID: 27286 Killed: No

    Read the article

  • Merging many documents into one in Word 2007: How to make each one start on a new page?

    - by Javier Badia
    I have 31 documents I need to merge into one, using Word 2007 on Windows 7. I read that you can go to Insert - Object - Text from file and select the documents you need. I did that and it worked fine. The thing is, each document is right against the last one. Is there any way to make it so each document starts on a new page, other than manually inserting page breaks? Here are some example pictures in case it's not clear. Suppose "document1" and "document2" are two documents I want to merge. How Word does it: How I want it to be:

    Read the article

  • I tried changing my folder icon in windows XP and now whenever I click a folder it opens in a new wi

    - by widgisoft
    On some random afternoon I figured I could do better than the boring yellow icon; After a vain attempt at trying to change it to no avail I realised that now whenever I open a folder it opens in a "search" window. This happened because when I go to the "(file folder)" type, the only option in there is "find" that is not supposed to be the default; upon saving this form XP tries to do me a favour and sets this as the new default. Now whenever I try to click a folder it opens the search window. great.

    Read the article

  • Auto-Attach EBS-volume to a New Spot Instance?

    - by Jeff
    I am experimenting with EC2 spot instances, and am needing some data to be retained between terminations. Now as I understand it, when the current price goes above my max. bid, it will be automatically terminated. I assume any init scripts I have will be run on shutdown so I can push data off to the EBS before unmounting. My question is, how can I automatically mount the same EBS volume on the new spot instance once the price goes down, since it won't have any of my init scripts that I would've loaded onto the root volume the first time? Do I have to create a custom AMI, or is there some other way to achieve this?

    Read the article

  • VirtualBox sound problem under Ubuntu

    - by VoY
    As I recently upgraded to karmic I started to see the following stuff in the logs when I run VirtualBox: Oct 30 18:14:34 apocalypse pulseaudio[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532)io[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532) Oct 30 18:14:34 apocalypse pulseaudio[2813]: alsa-source.c: Resume failed, couldn't restore original fragment settings. (Old: 65536/65536, New 1073676288/65532) After a while the logs grow to large sizes and fill up all of my /var partition. In VirtualBox there is an option to choose between pulseaudio and alsa for sound, but it seems to have no effect. I am using virtualbox-3.0 packages, not the ose version. My system is up to date.

    Read the article

  • How to setup a new website with Amazon EC2?

    - by ElHaix
    For a new EC2 instance, I setup a windows server with IIS. I added the Amazon name servers to my on my domain, and configured an elastic IP pointing to the server. I know this is working as I use this for RDC. On the server, I added the website tied to the IP address, and used the quicklink security group that has port 80 open. However, whenever I try going to the URL, I pretty much get nothing, and not sure where the blockage is occurring. Any suggestions? Thanks.

    Read the article

  • IKE2 VPN Server Certificate expired. How do I issue a new one

    - by Preet Sangha
    This is a completely new area for me. We are getting "13801: IKE Auth Credentials are unacceptable" messages when connecting to our VPN service on a small Windows 2008R2 domain. Doing a google search has lead me to investigate the Certificate Authority. I've looked in the Certificate Authority | Issued Certificates And the one for the VPN Reconnect is marked as expired since a couple of hours a ago. Can some one tell me what the step I need to take to regen/reissue a simillar cert please? FYI:The client certs are not expiring for a number of years so they are fine.

    Read the article

  • Why does my DVD drive spin up every minute or so, spin down, and repeat (new Dell Studio 15 with Win

    - by cybergibbons
    We have just got a new Dell Studio 15 laptop running Windows 7 home premium with slot load DVD drive. If there is a DVD drive in the drive, every minute or so, the drive will spin up, make a couple of noises like it is reading something and then spin down. I think this is ruining battery life. There is no software running that is obviously accessing the drive. Any ideas to what it could be? Are there any tools I could use to try and identify the problem? Thanks.

    Read the article

  • How can I automatically boot to my new Windows 7 installation?

    - by Walkerneo
    When I bought a new computer, I reinstalled windows on the larger hard drive it came with, but kept the old hard drive as well. I'm keeping the old Windows installation on the hard drive in case I need saved passwords or other data only accessible after signing in. On the boot screen, it gives me the option to boot into the installation I'm currently using, or the "recovered" installation. Attempting to boot into the second one fails anyway. Is there a way I can automatically boot into this installation while still maintaining the possibility of booting into the old installation?

    Read the article

  • How can I stop new Command Prompt windows spawned by another program from covering my foreground win

    - by Chris W. Rea
    Under Windows 7 x64, when I'm ripping CDs with Exact Audio Copy, it spawns a Command Prompt window each time it invokes the external MP3 compression program I use, LAME. While that's going on, I usually like to surf the web. However, I find it quite annoying that even when Firefox has the foreground, the Command Prompt windows spawned by EAC are coming up in the foreground, on top of my Firefox window. Is there a way to make those new Command Prompt windows spawn in the background? Alternatively, is there a way to make the current active window stay in the foreground / on top while I'm using it?

    Read the article

  • Where to find and download a new suitable software? [closed]

    - by user63411
    Possible Duplicate: How do you find a new software to download? I see that the most time I spend on the computer I lose to just searching for suitable software. How you do it? What is your way to find software? Do you first go to a forum or google? Which torrent site? which P2P program, website or server? For example: "I need a software that have functions as a remote desktop and also lets you copy and paste (drag and drop - file manager). And after few hours searching on Google I downloaded LOGMEIN Pro2, but than I see that is just trial. So if I need to find alternative I will spend another whole day. Where to go? I am not an amateur but I need a better system. I need better introduction on how to find what is the suitable software.

    Read the article

  • Internet connection issue

    - by Mr New
    For some reason this laptop doesn't want to stay connected to the Internet... I have to restart the DHCP client service every time to fix the connection problem. Could someone tell me whats going on because I didn't have to usually do this? And I'm not sure if these problems are connected but the sound also disconnects itself and I have to enable it back, but everything that was using audio has to be restarted in order to hear it, even the browser? There are no external speakers and I didn't install any new software. My laptop is an XPS M1530, running Windows Vista.

    Read the article

  • Considering building a new system; but undecided about chassis

    - by J.C. Bengtson
    I'm considering a new system build, and was thinking that this particular motherboard has features I need and like: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=667651&pagenumber=1&RSort=1&csid=ITD&recordsPerPage=5&body=REVIEWS#CustomerReviewsBlock .. but am unsure which model chassis to pair it with. I'd strongly prefer something from Cooler Master, as I'm a fan of their products, but am having a hard time deciding, and also don't want to get into some odd situation where the board doesn't properly fit. I plan on having two optical drives (5.25"), two internal HDs (3.5"), and will likely go with an SLI setup of 2 or possibly even 3 cards, so I'd need a chassis that is roomy enough to accomodate all of that, as well as the motherboard itself. Based on the stock available at that same site, do you all have any suggestions? The larger, the better, as I hate having components crammed together. Your help is most appreciated!

    Read the article

  • How to have supervisord follows the new unicorn process after USR2 rolling restart?

    - by ybart
    I have configured supervisord to track my unicorn server process. When I send USR2 process, this performs a rolling restart. After this operation the old unicorn master have restarted and then changed PID. This caused supervisor to lose track of the unicorn process considering it as EXITED. How can I have supervisord to follow the new unicorn process after this operation ? Unicorn has a PID file available, but I have not found an option in supervisord configuration for this. An other option would be to have supervisord to send itself the USR2 signal, but I don't know how to perform this and whether it will prevent my problem from occurring.

    Read the article

  • Will new Acer Revo (with Atom 330) be fast enough to be MythTV client/server?

    - by vava
    As a geek I really like Atom CPUs but can't find a reason to buy one yet :( Although I was thinking about making my own DVR with NAS and media center functionality. Unfortunately, even today's Acer Revo, built on ION platform is not fast enough for streaming Full HD videos. So what do you think, will new two core CPU make it better, will it be able to show Full HD videos, store them to disk and transfer something over the network at the same time? Will it be able to scale videos from Hulu and YouTube to fullscreen?

    Read the article

  • New Seagate GoFlex external hard drive reporting temperature 50C and higher--defective or normal?

    - by rob
    I have a brand-new Seagate GoFlex hard drive, and my SMART diagnostics program (CrystalDiskInfo) is warnings me that the drive is running too hot. The lowest reported temperature I've seen it is 48C, and the highest so far is 56C (all of last week, it was at 50C). According to several sources I've found online, including a Google study, hard disks operating higher than 40C have shorter lifespans. The temperature in the room is usually about 23C (74F), and orienting the drive vertically vs. horizontally doesn't seem to affect the operating temperature. Does anyone else have a GoFlex external desktop drive that runs at 40C or cooler? Is my drive just defective, or is this high temperature common for these drives?

    Read the article

  • Is it reasonable to use my Time Machine backup to migrate to a new primary hard drive?

    - by Michael Haren
    I'm planning to upgrade my MacBook's harddrive. I already use Time Machine to back up the system to an external drive. Is it reasonable to use Time Machine to restore my system to the new laptop drive, once I install it? I mean, a restore like this really ought to be fine, right? That's the point of it, after all! I know imaging the drive would be more appropriate but this plan seems a whole lot easier (albeit probably slower), with practically no risk since my original drive won't be involved. A second question would then be, are there any considerations to be made when doing a Time Machine restore?

    Read the article

  • Problem in installing two new updates in Win7 x64 !

    - by Mohammad
    I have Windows 7 x64 build 7600. Today it notifies that there are two new updates for Windows 7. http://www.picfront.org/d/7xKb I pressed Install Updates . The updates installed successfully, but I receive the notification yet! http://www.picfront.org/d/7xKd As you can see in the below image they're installed several times !!! Also, I restart my laptop several times, but the problem haven't solved yet ! http://www.picfront.org/d/7xL0 What should I have done to fix it ? Thanks.

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >