Search Results

Search found 18556 results on 743 pages for 'facebook connect'.

Page 221/743 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• Disabling hardware checking in the start up

  - by sven

  I have a ubuntu (10.04) on my desktop and it doesn't have monitor. I would like to connect the desktop (ubuntu) via teamviewer from my laptop. However, when the PC is powered, pc gives an error about it could not find monitor and it gets stuck in this error and does not continue. Since the ubuntu started correclty, teamviewer doesnt start to work on ubuntu so that I can not connect to the ubuntu. How can I disable hardware/desktop checking at the startup, so that ubuntu would start normally then I can use teamviewer?

  Read the article

• Why do I have to reconnect my usb router cable?

  - by Searock

  I have a Iball Baton ADSD2+ Router. It's working fine but the problem is when I boot into Ubuntu I have to unplug the usb cable and then plug it again, then it starts working. Why do I have to re connect my usb cable? Let me know if you need more details. Edit : I am using a direct connection. I mean to say I don't have to enter a username or password. I am connected to internet as soon as I start my router. The problem is if I start my router before my computer I have to re connect my usb cable. Thanks.

  Read the article

• How do I know if my serial adapter card is working?

  - by Ingram

  I just installed a 2 port serial adapter in my Ubuntu 10.10 system, then I tried following this tutorial that I used on my old system to connect to a cisco router (my old system had an onboard serial adapter, and the tutorial worked just fine). I can't get my system to connect to the cisco router, so I'm wondering if the card even works in Ubuntu. How can I tell if the card actually works with Ubuntu? #dmesg | grep tty [ 0.000000] console [tty0] enabled [ 0.358667] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.358994] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.359128] ttyS1: detected caps 00000700 should be 00000100 [ 0.359132] 0000:03:00.0: ttyS1 at MMIO 0xfeafd000 (irq = 16) is a 16C950/954 [ 0.359191] ttyS2: detected caps 00000700 should be 00000100 [ 0.359195] 0000:03:00.0: ttyS2 at MMIO 0xfeafd200 (irq = 16) is a 16C950/954

  Read the article

• How do I access a mounted Windows share from the command line?

  - by Bryan

  Hello all, I use Places > Connect to Server... to connect to a Windows share in my work environment (requires Kerberos authentication). When I do so, I can access the Windows share via Nautilus, but I can't figure out how to access the share from the command line without using smbclient. For example, the share isn't mounted under /mnt or /media. I also looked into ~/.gvfs but that's empty as well. Is it possible to access the mounted Windows share from the command line without using smbclient?

  Read the article

• Entity Framework: Connecting to a mdf user database file via localDB during script execution

  - by Marko Apfel

  Problem If you run the “Generate database from model” wizard and execute the generated script the destination database could be the wrong one (for instance master of the SQL Server). Solution To use an own mdf attachable user database some connection information must specified during script execution. Execute your script opens the dialog “Connect to Server”. Press “Options” and go to the second tab “Connection Properties”. Select “Browse server” in the “Connect to database” dropdown box: Confirm the information dialog with “Yes”. In the following dialog you could choose your user database. Now the schema is created in the user database.

  Read the article

• Network sharing for android

  - by Shagun

  I am on ubuntu 12.04 and I want to create a wifi hotspot to be used with my android device. Now I know there are so many tutorials available every where and that I have all options in network tab to use but I couldn't get it to work. Android does not work with an adhoc connection and whatever wifi network I created, my android device could not connect to it (I could connect a phone using bada to it and other computers can also be connected) I know the work around to get android on a adhoc connection but can't I have some thing as simple as connectify for windows? PS : I am not looking for workarounds involving android.

  Read the article

• Using Linux as guest on vmware and sharing connection with windows vista

  - by mike

  I been trying for weeks with vmwware player, now d/l vmwware work station 7, Have a laptop with one built in modem and a usb modem I bought, It works great switching it over from host to use in ubuntu to connect to the net, now when I use that modem from the host to connect online I have no trouble getting ubuntu to share the internet connection, But tried with NAT bridge host and all to get it to work from ubuntu to share the internet connection to windows vista, the host, I know it should work if it works the other way around, I tried setting up my wlan0 eht0 and eth1 to the correct IP can get both systems to notice each other by name and ip, but cant get them to share the connection from guest to host, I've tried iptables and all as well, Can someone please help me out with this? I am sure It is something something I'm over looking, Thanks in advance

  Read the article

• Unable to ping inside or outside network with default gateway 0.0.0.0

  - by agentroadkill

  I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

  Read the article

• Fixing IP Renewal After Laptop Suspend

  - by Cerin

  I have a laptop running Ubuntu 10.04, and I've noticed that with some wifi networks, but not all, I'm unable to reconnect after coming out of suspension. I've tried both Network Manager and Wicd management daemons, and both get through validation, but get hung up on "Acquiring IP address...". The only solution I've found is to reboot the machine, after which it acquires an IP address very quickly. What's the underlying issue here? What would be a more efficient way to resolve the problem? EDIT: I've noticed that if I open Wicd and manually press "Connect", it fails to acquire an IP. However, if I do nothing and let it automatically try and connect, it acquires an IP and connects just fine...

  Read the article

• You couldn't write it - Expired SA account

  - by GrumpyOldDBA

  This is the stuff of DBA nightmares ! email trail: Q. Can you reset the SA account on server XXXXX, we think it has expired and now no-one can work. Connect to Server: Surely no-one would set up a Server with an sa account which expires? Thankfully not. Find sa password and change connection to use SA account. Connect without issue. Me. Have checked Server and account is fine. A. Thanks that's great, you've fixed it we can all work now....(read more)

  Read the article

• Manually activate Network Manager Applet

  - by diosney

  The issue I've is that when I connect via modem through gnome-ppp the Network Manager Applet don't detect a connection and don't let me use the configured VPNs via its interface. How Can I manually activate the Network Manager Applet? What I need is to enable the Network Manager apple in order to use the "VPN Connection" section of the GUI. When I don't have an ethernet cable connected and I connect through a modem the Network Manager applet doesn't enables itself, it is like if don't recognizes the ppp0 interface. My question is: there is a way to force the Network Manager GUI indicator to make it "alive"/"up"/"enabled" in order to use the "VPN Connections"section? Thanks in advance.

  Read the article

• How do I get the Netgear N150 USB wifi adapter working on 12.04?

  - by Jon

  Just installed latest version of ubuntu. I'm using a Netgear N150 Wireless USB Micro Adapter WNA1000M which keeps asking for network password over and over. I read elsewhere that I needed to install the latest driver for my chipset (RTL8188CUS) which I have and still no joy. If I run the steps listed in this thread while connected through ethernet, the wireless will connect just fine. If I disconnect the ethernet, the wifi will even continue to work, but after a restart or two I will lose connection. If I repeat the steps listed in the aforementioned thread, it will not re-connect wifi unless I run those steps while connected to ethernet.......so strange...

  Read the article

• Wireless xbox360 pad connected with xboxdrv doesn't show in jstest

  - by Kyle Letham

  So Lubuntu 13.04, 3.4.0. I'm trying to use my wireless xbox controller. I've installed xboxdrv. I have to run it with sudo, or I get USBController::USBController(): libusb_open() failed: LIBUSB_ERROR_ACCESS. If I connect the adapter, run the program, and then press the button on the gamepad to connect it, it never really connects - just flashes like it's searching. If I reboot, leaving the controller searching, and run the command again while it's searching after I boot up, the controller connects (the light becomes solid in one corner). Using pkill xboxdrv and then relaunching it doesn't work. Regardless, no matter what I do, the gamepad never shows up in jstest-gtk. sudo xboxdrv --debug gives me: Controller: Microsoft Xbox 360 Wireless Controller (PC) Vendor/Product: 045e:0719 USB Path: 002:005 Wireless Port: 0 Controller Type: Xbox360 (wireless) [DEBUG] XboxdrvMain::run(): creating UInput [DEBUG] XboxdrvMain::run(): creating ControllerSlotConfig [DEBUG] UInput::create_uinput_device(): create device: 65534 [DEBUG] LinuxUinput::LinuxUinput(): Xbox Gamepad (userspace driver) 0:0 Any ideas?

  Read the article

• BCM4313 wireless not working on Dell Inspiron 4010

  - by Mandar

  I have Ubuntu 11.10 installed today and trying to connect to wireless but its not working. It has been working correctly on my Windows 7. i am pretty new to Ubuntu. I tried suggestions listed in this forum but nothing seems to be working for wireless. It shows wireless card listed when I do- sudo lshw -C network: It displays wireless interface as BCM4313. my laptop- Dell Inspiron 4010 Ubuntu- 11.10 Any suggestions? It works when I connect LAN cable to same modem.

  Read the article

• SQL Server 2008 R2: StreamInsight changes at RTM: Event Flow Debugger and Management Interface Secur

  - by Greg Low

  In CTP3, I found setting up the StreamInsight Event Flow Debugger fairly easy. For RTM, a number of security changes were made. First config: To be able to connect to the management interface, your user must be added to the Performance Log Users group. After you make this change, you must log off and log back on as the token is only added to your login token when you log on. I forgot this and spent ages trying to work out why I couldn't connect. Second config: You need to reserve the URL that the...(read more)

  Read the article

• Wireless not connecting on Ubuntu 13.10, Toshiba Satellite pro L 650

  - by user204842

  I have just installed Ubuntu 13.10 on my Toshiba Satellite Pro L650. After several reboots, installing/ uninstalling the broadcom driver I still can't connect. It detects the wi fi signals and the icon flashes as if it's trying to connect but never actually does. I'm really quite rubbish with code and stuff, but I really like Ubuntu as an OS and would really appreciate any suggestions anyone can offer! 02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v1.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)

  Read the article

• Why doesn't my graphic card support 1280*1024?

  - by Allwar

  Hi, I have an external monitor which is an 20" 1280*1024. In windows 7 it works fine with that resolution but in ubuntu it can't. Example: In windows I connect it and activates it, done. In ubuntu I connect and the only resolution that is available is the ones my laptop screen support, 12" 1366*768. My laptop is an asus 1201n. If I force it to use 1280*1024 both screen crashes and i have to force a reboot. what should I do? alvar@alvars-laptop:~$ disper -l display DFP-0: HSD121PHW1 resolutions: 320x175, 320x200, 360x200, 320x240, 400x300, 416x312, 512x384, 640x350, 576x432, 640x400, 680x384, 720x400, 640x480, 720x450, 640x512, 700x525, 800x512, 840x525, 800x600, 960x540, 832x624, 1024x768, 1366x768 display CRT-0: CRT-0 resolutions: 320x240, 400x300, 512x384, 680x384, 640x480, 800x600, 1024x768, 1152x864, 1360x768

  Read the article

• Communicating with a remote host via HTTPS

  - by user619818

  I have developed a solution where a Java applet makes a socket connection to a port on a socket server (which happens to run on a web server). But a new client has implemented https within their LAN and so I am told communication must be via HTTPS. With standard socket communication you connect to a port on a host. But the clients HTTPS uses port 443. So will it be possible to connect to a socket server using a different port? I assume it must be possible? Any help would be much appreciated.

  Read the article

• How do I access my remote Ubuntu server via X-windows from my Mac?

  - by Magooda

  I have an Ubuntu server (12.04 LTS) running remotely on a cloud hosting service. I have installed ubuntu-desktop via apt-get: $ sudo apt-get install ubuntu-desktop It appears to have installed no problem. I have confirmed that /etc/ssh/ssh_config on the server contains the lines ForwardAgent yes ForwardX11 yes ForwardX11Trusted yes and that /etc/ssh/sshd_config on the server contains the line: X11Forwarding yes I then rebooted the server. It came back up no problem. Now, starting X11.app on my Mac I am presented with an Xterm. I connect to my server from this terminal using: $ ssh -X <myhost> and I connect to the server, no problem. At this point I don't know what to do. I have tried $ sudo startx but I get a "no screens found" error. I don't have screens because its a headless cloud server, but I just want to acces it from my Mac through X. What now?

  Read the article

• Problem connecting to Webmin

  - by railguage48

  I have installed Webmin with the view to try an understand what is all running. Yesterday I had it setup with login and password, but today when I try to get access to the server with: https://ubuntu:10000/ in order to login, I get unable to connect, the page does not load. Seems like there is no connection. I tried http://localhost:10000 and https://localhost:10000 They both returned the same unable to connect response. I am not sure of what it means to turn https on. ... the https and http is not showing. Am I going about this the wrong way?

  Read the article

• How do I get an Xstream mobile phone working as a modem?

  - by callmegus

  I bought a CDMA mobile phone that can use as modem, this http://smartfren.com/xstream/ and i wanna try it on my ubuntu plug usb , and run "lsusb" callmegus@Presario-CQ43-304AU:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 058f:a001 Alcor Micro Corp. Bus 003 Device 002: ID 1bbb:0106 T & A Mobile Phones Bus 003 Device 003: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 004 Device 002: ID 0a5c:21e3 Broadcom Corp. I successfully "modprobe" this device, and connect to internet, but it's disconnected somehow .. and i can recconect it. I try "lsusb" again .. and something went wrong, here Bus 003 Device 002: ID 1bbb:1000 T & A Mobile Phones I do "modprobe" again and again , but it still won't connect Please guide me

  Read the article

• How to route my internet from mobile broadband from a third party software to network manager

  - by user86865

  I use mobile broadband connection (Reliance Netconnect+ USB) for internet. I can connect to this network from Network Manager easily. There is a 3rd party software which is given by the service provider. I can also connect to the internet by using this software (Software from ZTE). But when i am using this software, i cannot upload files to Ubuntu One, Cannot install packages from Software Center, etc except i can load web pages from FireFox. But when using the connection from NM, i can do all the stuffs. But, there are so many options available in this 3rd party software. So, can i route my internet connection from this software to my Network Manager? There are some options available in the settings as;- Dns, alternate dns, static IP, CHAP, PAP. Can anyone help me?? I use 12.04.

  Read the article

• Windows: starting sqlplus in new window from cygwin bash

  - by katsumii

  When I start sqlplus, more often than not, I want it to start in new window,whether it be on Linux/Solaris GNOME or Windows.I seldom use GNOME so I never bothered to figure out how.On Windows, one can use Windows menu or Win+R "Run" dialog but I prefer usingbash. Because, this way, I can keep the history in ~/.bash_history file.There are 2 ways. Using cmd.exe or cygstart.For example, to start default sqlplus.exe to connect to default local instance. $ cmd /c "start sqlplus sys/oracle as sysdba" 2nd example. To start sqlplus in 2nd Oracle home and to connect to non-default local instance. $ ORACLE_SID=orcl cygstart /cygdrive/g/app/product/11.2.0.3/dbhome_1/BIN/sqlplus scott I hope this tip helps reducing your DBA time.

  Read the article

• Can't install wireless driver or get ubuntu to recognize ethernet cable

  - by Catherine

  I'm brand new to Ubuntu and I'm tearing my hair out trying to figure out how to connect to the internet. When I try to activate the Broadcom STA wireless driver, it says "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log." So I try the steps detailed here http://ubuntuforums.org/showthread.php?t=1967515&highlight=jockey Problem is, I can't connect to the internet via ethernet cable either. I tested the cable with another laptop and it works just fine. I don't know what to do. Any help is greatly appreciated.

  Read the article

• Commands to run when Connecting HDMI

  - by yurividal

  Everytime I connect my pc to my tv using my HDMI cable (to watch my movies), I have to manually go to: 1- Monitors, to select "mirror" screen to HDMI 2- Sound, to select the HDMI as default sound output 3- Screen Off an Lock, to avoid screen locking while watching a video. Is there a way I can automate this? Or at least write a script with commands that will do this. (I could manually run a script every time I connect my HDMI, and then run annother one to undo the changes later) How can I do these actions from a Command Line?

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >