Search Results

Search found 11524 results on 461 pages for 'insurance networking news'.

Page 223/461 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

  • How to use 2 or more internet connections on the same network?

    - by Rogue
    Living in a joint family we have 3 internet connections, each floor has one internet connection which is split per floor. Each internet connection is shared between 4-5 computers using a switch per floor. Each of these internet sharing networks are independent of each other. What I want to achieve here is a local network (for local messenger and file sharing) that can combine all the 3 independent networks, problem is that whenever I try to do that the whole network tends to use just one internet connection. I have all the necessary hardware. How do I solve this problem, one approach could be that I could get one PC to act as a server and bridge the internet connections and then the whole network would have to access the internet through this server. Theoretically this could be possible but I have never tried this approach in real life. Also if certain computers need be restricted from internet access how would this be possible on the same network?

    Read the article

  • How Does EoR Design Work with Multi-tiered Data Center Topology

    - by S.C.
    I just did a ton of reading about the different multi-tier network topology options as outlined by Cisco, and now that I'm looking at the physical options (End of Row (EoR) vs Top of Rack(ToR)), I find myself confused about how these fit into the logical constructs. With ToR it also maps 1:1: at the top of each rack there is a switch(es) that essentially act as the access layer. They connect via fiber to other switches, maybe chassis-based, that act as the aggregation layer, that then connect to the core layer. With EoR it seems that the servers are connecting directly to the aggregation layer, skipping the access layer all together, by plugging directly into what are typically chassis switches. In EoR then is the standard 3-tier model now a 2-tier model: the servers go to the chassis switch which goes straight to the core switch? The reason it matters to me is that my understanding was that the 3-tier model was more desirable due to less complexity. The agg switch pair acts as default gateway and does routing; if you use up all of your ports in your agg layer pair it's much more complicated to add additional switches, than simply adding more switches at the access layer. Are there other downsides to this layout? Does this 3-tier architecture still apply in some way in EoR? Thanks.

    Read the article

  • Windows 7 PPTP VPN problem

    - by Marco Martins
    Hi, I'm currently using an win 7 as an network server at my home. I've created some shared folders wich can be accessed easily from any pc on my network (win and mac computers) recently I decided to turn on the win 7 pptp to access remotely to my server from anywhere. the problem is with that on, on my router my server ip change, acording to my ipconfig on the cmd my router gets the ip from a "PPP adapter RAS (dial in)". when that happens I cannot access to the shared files over the lan on my mac, but i can connect to the vpn but again can't access to my files. (i've tried connecting to the vpn from another network and it worked, even the file share) anyone can help me? thanks

    Read the article

  • Funnelling http traffic

    - by spencer p
    I have a situation where a large batch of servers (X), on demand, need to request data from a smaller set of web servers (Y). The worst case scenario is if all servers in X decide to fetch different requests to one server in Y. That would be X amount of connections, which could be a very large burst of traffic. The best case scenario is if 1 server in X hit 1 server in Y in tandem. Life does not work like this. One idea to entertain is placing a proxy, similar to squid between X and Y. All of X servers can connect to this proxy, but would result in a few persistent (http keepalive) connections to Y. If The few were say, 3 or 4, then it would funnel. If we could then rate limit those connections and traffic decides to spike unusually high, we wouldn't hurt anyone but ourselves. Thoughts?

    Read the article

  • What does "incoming" and "outgoing" traffic mean?

    - by mgibsonbr
    I've seen many resources explaining how to set up a server's firewall to allow incoming and outgoing traffic on HTTP standard ports (80 and 443), but I can't figure out why I would need either of them. Do I need to unblock both for a "regular" web site to work? For file uploads to work? Are there situations where it would be advisable to unblock one and leave the other blocked? Sorry if that's a basic question, but I couldn't find it explained anywhere (also I'm not a native english speaker). I know in a "regular" web site the client is always the one who initiates a request, so I'm assuming a web server must accept incoming traffic on those ports, and my common sense tells me the server is allowed to send a response without unblocking anything else (otherwise it wouldn't make sense to have two types of rules). Is that correct? But what is an outgoing web (service) traffic, and what would be its use? AFAIK if the server wanted to initiate a connection with another machine, the specific port that matters is the one in the other end (i.e. the destination port would be 80), on its end any free port could be used (the source port would be random). I can open HTTP requests from my server (using wget for instance) without unblocking anything. So I'm assuming my concepts of "incoming" and "outgoing" are wrong somehow.

    Read the article

  • How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

    - by Maharshi Raval
        I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

    Read the article

  • Client can't reach my production webserver. It's their ISP's fault, but now what?

    - by MikeN
    I have a customer in Michigan who can't access my production SaaS webserver that is hosted on Slicehost. All other companies across the US/Canada/Europe have no problem reaching the site. This problem is occuring intermittantly, and Slicehost customer service says it's a problem with the client's ISP. I got the IP address of my client, and ping'ing that IP address from my PROD server fails, but ping'ing the IP address from my dev box or our seperate blog server (also hosted on slicehost) works. How do I debug a problem like this? I asked the client to reach out to their local ISP and ask about this problem. A traceroute shows that the packets are getting stopped on a Comcast Michigan node which is the client's ISP. Is there anything I can do additionally to fix this problem for my client?

    Read the article

  • How can I remotely display images on my computer?

    - by Jakob
    What I Have: A laptop booted with Ubuntu and a stationary computer dual-booted with Ubuntu and Vista, both connected through a wireless ad-hoc network. What I Want: I want a way to display images in fullscreen on my stationary, using my laptop as a "remote control". I want to be able to choose another picture at any time and have my stationary computer remain in fullscreen mode at all times. Preferably, I should also be able to display just an empty (black) screen. How can I arrange for this? What I Have Tried: I have tried simply SSH:ing into my stationary computer and opening the image files using an image viewer, but all of the ones that I have tried (Eye of Gnome, Mirage, Gwenview, and others) open a new window for every new image. I don't know how to force them into using a single instance. I have tried using the VLC remote control command line interface, but apart from seeming somewhat unreliable (exiting with segmentation faults at one point), it also displays some images with a green border and forces me to pause playback in order for the image to remain on screen. Bonus Question: In my final setup, I also need to play music through my stationary computer's speaker and have the ability to switch to another track at any point, like with the images. Preferably, I would like to control the images and the audio through the same interface. How can I best achieve this?

    Read the article

  • How can I create a VLAN on my extreme switch for a separate subnet/domain?

    - by drpcken
    I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). Switch is a Summit x450e-48p My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

    Read the article

  • Jumbo Frames on DIR-655

    - by Spookyone
    Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

    Read the article

  • How to masked network directory with Active Directory & IIS7

    - by Zach Shallbetter
    Departments within our organization have file directories on our IIS7 2008 R2 server similar to \\apollo\marketing.oems, which are outward facing for clients. We would like to create masked directories for quicker access like \\marketing that would point to \\apollo\marketing.oems. I've done research and have not come across any real answers, although I know it's possible Any help would be appreciated.

    Read the article

  • Will my internet address for my internal site cause my traffic to go external?

    - by Toby Allen
    If I have two domains pointing to the same machine, but one resolves to an internal address and the other to my internet facing router, will there be any differnce in route taken to my machine (primarily in terms of performanc). eg. internal.mydomain.com resolves to 192.168.1.200 external.mydomain.com resolves to A.Web.External.IP both eventually resolve back to the same machine. For a client in the network, will using the external address give a performance penalty?

    Read the article

  • Routing Traffic on Ubuntu to give Raspberry PI Internet Access

    - by Scruffers
    I'm hoping someone can point me in the right direction for setting up my Linux (Ubuntu 12.04) box to route traffic from eth0 to wlan0. I'll try and explain the problem I am trying to solve: I currently have two separate networks: [RaspberryPi/eth0] 192.168.2.2 / 255.255.255.0 ^ | v [Ubuntu/eth0] 192.168.2.1 / 255.255.255.0 And: [Ubuntu/wlan0] 192.168.1.100 / 255.255.255.0 ^ | v [ADSL router] 192.168.1.1 / 255.255.255.0 So currently if I want to access the RaspberryPI I can SSH from the Ubuntu box to the PI. And if I want to use the Internet, I have full access from the Ubuntu box, but nothing from the RaspberryPI - the two networks are partitioned. What I would like to do is configure things so that the RaspberryPI has Internet access via the Ubuntu box and out to the Internet. I tried to create a bridge, but got the message "wlan0: operation not supported" (wireless chipset is Ralink RT3062). I'm sure giving the Raspberry PI Internet access should be easy to do in this configuration, but I am a bit lost - can someone point me in the right direction please?

    Read the article

  • very slow internet with Linksys WRT54GL only in wireless mode (wired is OK)

    - by gojira
    I bought a new Cisco Linksys WRT54GL router to connect my laptop (running Windows 7) to the internet. I installed Tomato 1.28 firmware on the router. When I connect the laptop to the router via ethernet cable, everything is fine and I get extremely fast up- and download speeds. When I connect wirelesssly however, websites load extremely slow - it takes dozens of seconds to load a website! <-- This is my question, how can I fix the wireless speed issue? Gmail for example is unusable this way. I tried speedtest.net, but this always fails in the upload part of the test so I can't even test the bandwidth (could the fact that it fails in the upload part, not the download part, be an indication what the problem is?!). I have isolated the problem a bit, I am convinced it has to do either with the router itself, the router settings, or the settings of the wireless connection in Win 7. Because previously, I was using another router by Buffalo and I had no problems whatsoever. I have tried to reproduce the settings from the Bufallo router as closely as possible on the Linksys router (same channel, same encryption etc). The download speed problem only occurs with the Linksys router, and only in wireless mode! When I exchange the Linksys router with the Buffalo router I have here for testing, the wireless speed is up to normal again. Also, before I had installed the Tomato firmware I had exactly the same problem, so it has nothing to do with the firmware itself. Notes & things I already tried: Changing the channel: does not seem to affect anything, I am also on the same channel (10) which I was previously on when I had a Buffalo router. QoS is off. Ping to the router itself is OK, ~ 1 ms. Some current settings of the linksys router: WAN / Internet Type: DHCP Wirelesss Mode: Access Point B/G Mode: Mixed Broadcast: check Channel: 10 - 2.457 GHz Security: WPA2 Personal Encryption: AES

    Read the article

  • bluetooth doesn't recognize mouse (and other devices)... sometimes

    - by Angelo
    I have a problem with bluetooth with Vista, running on my MacBook. It often doesn't recognize my wireless Magic Mouse. And I saw that it even doesn't seem to start as the pictogram in the task-bar isn't there most of the time I run Vista. But I'm only an Apple-nerd, so I don't know to much about this issue on Vista. When reinstalling Boothcamp or other updates, then once in a while bluetooth recognizes my own mouse (and other devices from some neighbours... so that implicates that the problem must be the bluetooth function in the first place, not my mouse.) Is there some update for the bluetooth application? Angelo

    Read the article

  • retransmission of lost TCP segment

    - by tcpip
    What will happen in the following scenario (assume the connection is already established): (stack A) send 10 byte data (stack B) send ACK for 10 byte data (stack B) send 200 byte data (stack B) send 100 byte data (stack B) send 50 byte data (stack A) send ACK for 350 byte data and also send 70 bytes data This segment gets lost and does not reach machine B. (stack B) retransmit 200 byte data (step 3) (stack A) send ACK for 200 byte data and the next expected seq number as the one for 70 bytes data Question: Should 70 bytes data be also transferred with the ACK in step 8? Note that the retransmission timer for step 6 has not expired yet.

    Read the article

  • Why doesn't Ubuntu show my wireless device after updating the kernel?

    - by Jigar Shah
    After an kernel update Ubuntu doesn't show my wireless device. How can I fix this? I checked the syslogs and it says the following: 2010-02-16 19:25:39,913 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:25:39,940 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,066 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,086 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,162 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,451 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,480 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,506 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:12,496 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:19,870 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:23,398 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2010-02-16 19:35:23,399 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:35:23,432 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted

    Read the article

  • Host ::1 resolves to remote IP

    - by thebuckst0p
    /etc/hosts files usually have this line, ::1 localhost. I thought ::1 was the equivalent of 127.0.0.1/localhost, and from my reading it seems to be the IPv6 version. So I was using it in Apache for firewalling, "Allow from ::1" and it only allowed local. Then suddenly that stopped working, so I pinged ::1 and got a remote IP address. I tracerouted it and it went through my ISP, through some Microsoft server, then another half dozen steps of asterisks... I'm not sure why this would be (the remote IP), but it doesn't seem good. I grep'd my hard drive for the remote IP and it doesn't appear anywhere. Is this some indicator that I'm being hacked, or normal behavior? Maybe my IPv6 settings are wrong? (This is a brand new MacBookPro with Snow Leopard.) Any ideas about this would be great - what is ::1 supposed to be, why would it be remote, should I be worried, how do I get it back to localhost? Thank you!

    Read the article

  • How to configure Amazon Security Groups to achieve multi-tier architecture?

    - by ks78
    What is the preferred way to configure Amazon Security Groups to achieve a multi-tier architecture? Each of my instances has its own Security Group, which I only want to use for rules specific to an instance. I'd like to keep any rules which apply to multiple instances in a separate Security Group, which can then be assigned to instance Security Groups as necessary. As an example, I've setup a group called "admin", which allows administrative access from my IP. I added the "admin" group as the source to each of my instance security groups. However, I still can't access the instances from my IP without adding the rules directly to the instance's group. Am I missing something? Although it seems a multi-tier security architecture should be possible, it doesn't seem to be working.

    Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >