Search Results

Search found 22160 results on 887 pages for 'speed up computer'.

Page 223/887 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

  • How to Assign a Static IP Address in XP, Vista, or Windows 7

    - by Mysticgeek
    When organizing your home network it’s easier to assign each computer it’s own IP address than using DHCP. Here we will take a look at doing it in XP, Vista, and Windows 7. If you have a home network with several computes and devices, it’s a good idea to assign each of them a specific address. If you use DHCP (Dynamic Host Configuration Protocol), each computer will request and be assigned an address every time it’s booted up. When you have to do troubleshooting on your network, it’s annoying going to each machine to figure out what IP they have. Using Static IPs prevents address conflicts between devices and allows you to manage them more easily. Assigning IPs to Windows is essentially the same process, but getting to where you need to be varies between each version. Windows 7 To change the computer’s IP address in Windows 7, type network and sharing into the Search box in the Start Menu and select Network and Sharing Center when it comes up.   Then when the Network and Sharing Center opens, click on Change adapter settings. Right-click on your local adapter and select Properties. In the Local Area Connection Properties window highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now select the radio button Use the following IP address and enter in the correct IP, Subnet mask, and Default gateway that corresponds with your network setup. Then enter your Preferred and Alternate DNS server addresses. Here we’re on a home network and using a simple Class C network configuration and Google DNS. Check Validate settings upon exit so Windows can find any problems with the addresses you entered. When you’re finished click OK. Now close out of the Local Area Connections Properties window. Windows 7 will run network diagnostics and verify the connection is good. Here we had no problems with it, but if you did, you could run the network troubleshooting wizard. Now you can open the command prompt and do an ipconfig  to see the network adapter settings have been successfully changed.   Windows Vista Changing your IP from DHCP to a Static address in Vista is similar to Windows 7, but getting to the correct location is a bit different. Open the Start Menu, right-click on Network, and select Properties. The Network and Sharing Center opens…click on Manage network connections. Right-click on the network adapter you want to assign an IP address and click Properties. Highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK. You’ll need to close out of Local Area Connection Properties for the settings to go into effect. Open the Command Prompt and do an ipconfig to verify the changes were successful.   Windows XP In this example we’re using XP SP3 Media Center Edition and changing the IP address of the Wireless adapter. To set a Static IP in XP right-click on My Network Places and select Properties. Right-click on the adapter you want to set the IP for and select Properties. Highlight Internet Protocol (TCP/IP) and click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK. You will need to close out of the Network Connection Properties screen before the changes go into effect.   Again you can verify the settings by doing an ipconfig in the command prompt. In case you’re not sure how to do this, click on Start then Run.   In the Run box type in cmd and click OK. Then at the prompt type in ipconfig and hit Enter. This will show the IP address for the network adapter you changed.   If you have a small office or home network, assigning each computer a specific IP address makes it a lot easier to manage and troubleshoot network connection problems. Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressChange Ubuntu Server from DHCP to a Static IP AddressVista Breadcrumbs for Windows XPCreate a Shortcut or Hotkey for the Safely Remove Hardware DialogCreate a Shortcut or Hotkey to Eject the CD/DVD Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

    Read the article

  • The Best Free Tools for Creating a Bootable Windows or Linux USB Drive

    - by Lori Kaufman
    If you need to install Windows or Linux and you don’t have access to a CD/DVD drive, a bootable USB drive is the solution. You can boot to the USB drive, using it to run the OS setup program, just like a CD or DVD. We have collected some links to free programs that allow you to easily setup a USB drive to install Windows or Linux on a computer. NOTE: If you have problems getting the BIOS on your computer to let you boot from a USB drive, see our article about booting from a USB drive even if your BIOS won’t let you. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

    Read the article

  • Soluto’s New Quick Question Button Makes Family Tech Support Simple

    - by Jason Fitzpatrick
    Soluto, a computer and boot management tool, now features a Quick Question button that allows the people you help out to easily click a button and send you both a short message and a screenshot of the problem. Any time your friend or family member presses F8, Soluto will take a screenshot of the screen, the Task Manager history, and a note from the user highlighting what issue they’re experiencing, and then email it all to you. After reviewing the email you can easily login to Soluto to remotely manage your friend’s computer and help with the problem. For more information about Soluto you can check out our previous reviews of the service here and here, or just hit up the link below to read more and take Soluto for a test drive. Soluto is a free service (for the first 5 computers), Windows only. Introducing Quick Question [The Soluto Blog] Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For? HTG Explains: What is DNS?

    Read the article

  • How to Find Office 2003 Commands in Office 2010

    - by Matthew Guay
    Are you new to the ribbon interface in Office 2010?  Here’s how you can get up to speed and learn where everything is quickly and easily. Microsoft has made an interactive guide to Office 2010’s new interface to help users learn their way around the new version.  If you’ve already used Office 2007, then Office 2010 will be very easy to transition to, but if you’re still using Office 2003 you may find the learning curve more steep.  With this interactive guide, upgrading your Office skills doesn’t have to be hard. Learn Your Way Around the Office Ribbon Open the Office 2010 interactive guides site (link below) in your browser, and select the Office app you want to explore. The guides are powered by Silverlight, so if you don’t already have it installed you will be prompted to do so. Once the guide has loaded, click Start to begin. Select any menu or toolbar item in the Office 2003 mockup.  A tooltip will appear to show you how to find this option in Word 2010. If you click the item, the interface will switch to an Office 2010 mockup and will interactively show you how to access this feature.  The Thumbnails view isn’t available by default in Word 2010, so it shows us how to add it to the ribbon.  When you’ve figured this command out, click anywhere to go back to the Office 2003 mockup and find another item. Currently the guides are available for Word, Excel, and PowerPoint, but the site says that guides for the other Office apps will be available soon.  Here’s the PowerPoint guide showing where the Rehearse Timings option is in PowerPoint 2010. Install the Interactive Guides to Your Computer You can also install the guides to your computer so you can easily access them even if you’re not online.  Open the guide you want to install, and click the Install button in the top right corner of the guide. Choose where you want the shortcuts, and click Ok. Here’s the Interactive Word 2010 guide installed on our computer.  The downloaded version seemed to work faster in our tests, likely because all the content was already saved to the computer.  If you decide you don’t need it any more, click Uninstall in the top right corner. Download Office Cheat Sheets If you’d like a cheat-sheet of Office commands that have changed or are new in Office 2010, Microsoft’s got that for you, too.  You can download Office reference workbooks (link below) that show how to access each item that was in Office 2003’s menus.  Here’s the Word guide showing where each of Word 2003’s commands from the help menu are in Word 2010. Learn Your Way Around Office 2007, Too! Microsoft offers similar interactive guides for learning the ribbon in Office 2007, so if you’re still using Office 2007 but can’t find a command, feel free to check it out as well (link below).  Guides are available for Word, Excel, PowerPoint, Access, and Outlook 2007.  You can also download cheat sheets for Office 2007 at this site as well.  Here’s the tutorial showing us where the font options are in PowerPoint 2007. Conclusion We have found the ribbon interface to be a great addition to Office, but if you’ve got years of Office 2003 experience under your belt you may find it difficult to locate your favorite commands.  These tutorials can help you use your old Office knowledge to learn Office 2010 or 2007 in a quick and easy way! Links Office 2010 interactive guide Download Office 2010 reference workbooks Office 2007 interactive guide Similar Articles Productive Geek Tips How To Find Commands and Functions in Office 2007 the Easy WayMake Excel 2007 Always Save in Excel 2003 FormatMake Word 2007 Always Save in Word 2003 FormatAdd or Remove Apps from the Microsoft Office 2007 or 2010 SuiteCreate a Customized Tab on the Office 2010 Ribbon TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird

    Read the article

  • Azure Grid Computing - Worker Roles as HPC Compute Nodes

    - by JoshReuben
    Overview ·        With HPC 2008 R2 SP1 You can add Azure worker roles as compute nodes in a local Windows HPC Server cluster. ·        The subscription for Windows Azure like any other Azure Service - charged for the time that the role instances are available, as well as for the compute and storage services that are used on the nodes. ·        Win-Win ? - Azure charges the computer hour cost (according to vm size) amortized over a month – so you save on purchasing compute node hardware. Microsoft wins because you need to purchase HPC to have a local head node for managing this compute cluster grid distributed in the cloud. ·        Blob storage is used to hold input & output files of each job. I can see how Parametric Sweep HPC jobs can be supported (where the same job is run multiple times on each node against different input units), but not MPI.NET (where different HPC Job instances function as coordinated agents and conduct master-slave inter-process communication), unless Azure is somehow tunneling MPI communication through inter-WorkerRole Azure Queues. ·        this is not the end of the story for Azure Grid Computing. If MS requires you to purchase a local HPC license (and administrate it), what's to stop a 3rd party from doing this and encapsulating exposing HPC WCF Broker Service to you for managing compute nodes? If MS doesn’t  provide head node as a service, someone else will! Process ·        requires creation of a worker node template that specifies a connection to an existing subscription for Windows Azure + an availability policy for the worker nodes. ·        After worker nodes are added to the cluster, you can start them, which provisions the Windows Azure role instances, and then bring them online to run HPC cluster jobs. ·        A Windows Azure worker role instance runs a HPC compatible Azure guest operating system which runs on the VMs that host your service. The guest operating system is updated monthly. You can choose to upgrade the guest OS for your service automatically each time an update is released - All role instances defined by your service will run on the guest operating system version that you specify. see Windows Azure Guest OS Releases and SDK Compatibility Matrix (http://go.microsoft.com/fwlink/?LinkId=190549). ·        use the hpcpack command to upload file packages and install files to run on the worker nodes. see hpcpack (http://go.microsoft.com/fwlink/?LinkID=205514). Requirements ·        assuming you have an azure subscription account and the HPC head node installed and configured. ·        Install HPC Pack 2008 R2 SP 1 -  see Microsoft HPC Pack 2008 R2 Service Pack 1 Release Notes (http://go.microsoft.com/fwlink/?LinkID=202812). ·        Configure the head node to connect to the Internet - connectivity is provided by the connection of the head node to the enterprise network. You may need to configure a proxy client on the head node. Any cluster network topology (1-5) is supported). ·        Configure the firewall - allow outbound TCP traffic on the following ports: 80,       443, 5901, 5902, 7998, 7999 ·        Note: HPC Server  uses Admin Mode (Elevated Privileges) in Windows Azure to give the service administrator of the subscription the necessary privileges to initialize HPC cluster services on the worker nodes. ·        Obtain a Windows Azure subscription certificate - the Windows Azure subscription must be configured with a public subscription (API) certificate -a valid X.509 certificate with a key size of at least 2048 bits. Generate a self-sign certificate & upload a .cer file to the Windows Azure Portal Account page > Manage my API Certificates link. see Using the Windows Azure Service Management API (http://go.microsoft.com/fwlink/?LinkId=205526). ·        import the certificate with an associated private key on the HPC cluster head node - into the trusted root store of the local computer account. Obtain Windows Azure Connection Information for HPC Server ·        required for each worker node template ·        copy from azure portal - Get from: navigation pane > Hosted Services > Storage Accounts & CDN ·        Subscription ID - a 32-char hex string in the form xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx. In Properties pane. ·        Subscription certificate thumbprint - a 40-char hex string (you need to remove spaces). In Management Certificates > Properties pane. ·        Service name - the value of <ServiceName> configured in the public URL of the service (http://<ServiceName>.cloudapp.net). In Hosted Services > Properties pane. ·        Blob Storage account name - the value of <StorageAccountName> configured in the public URL of the account (http://<StorageAccountName>.blob.core.windows.net). In Storage Accounts > Properties pane. Import the Azure Subscription Certificate on the HPC Head Node ·        enable the services for Windows HPC Server  to authenticate properly with the Windows Azure subscription. ·        use the Certificates MMC snap-in to import the certificate to the Trusted Root Certification Authorities store of the local computer account. The certificate must be in PFX format (.pfx or .p12 file) with a private key that is protected by a password. ·        see Certificates (http://go.microsoft.com/fwlink/?LinkId=163918). ·        To open the certificates snapin: Run > mmc. File > Add/Remove Snap-in > certificates > Computer account > Local Computer ·        To import the certificate via wizard - Certificates > Trusted Root Certification Authorities > Certificates > All Tasks > Import ·        After the certificate is imported, it appears in the details pane in the Certificates snap-in. You can open the certificate to check its status. Configure a Proxy Client on the HPC Head Node ·        the following Windows HPC Server services must be able to communicate over the Internet (through the firewall) with the services for Windows Azure: HPCManagement, HPCScheduler, HPCBrokerWorker. ·        Create a Windows Azure Worker Node Template ·        Edit HPC node templates in HPC Node Template Editor. ·        Specify: 1) Windows Azure subscription connection info (unique service name) for adding a set of worker nodes to the cluster + 2)worker node availability policy – rules for deploying / removing worker role instances in Windows Azure o   HPC Cluster Manager > Configuration > Navigation Pane > Node Templates > Actions pane > New à Create Node Template Wizard or Edit à Node Template Editor o   Choose Node Template Type page - Windows Azure worker node template o   Specify Template Name page – template name & description o   Provide Connection Information page – Azure Subscription ID (text) & Subscription certificate (browse) o   Provide Service Information page - Azure service name + blob storage account name (optionally click Retrieve Connection Information to get list of available from azure – possible LRT). o   Configure Azure Availability Policy page - how Windows Azure worker nodes start / stop (online / offline the worker role instance -  add / remove) – manual / automatic o   for automatic - In the Configure Windows Azure Worker Availability Policy dialog -select days and hours for worker nodes to start / stop. ·        To validate the Windows Azure connection information, on the template's Connection Information tab > Validate connection information. ·        You can upload a file package to the storage account that is specified in the template - eg upload application or service files that will run on the worker nodes. see hpcpack (http://go.microsoft.com/fwlink/?LinkID=205514). Add Azure Worker Nodes to the HPC Cluster ·        Use the Add Node Wizard – specify: 1) the worker node template, 2) The number of worker nodes   (within the quota of role instances in the azure subscription), and 3)           The VM size of the worker nodes : ExtraSmall, Small, Medium, Large, or ExtraLarge.  ·        to add worker nodes of different sizes, must run the Add Node Wizard separately for each size. ·        All worker nodes that are added to the cluster by using a specific worker node template define a set of worker nodes that will be deployed and managed together in Windows Azure when you start the nodes. This includes worker nodes that you add later by using the worker node template and, if you choose, worker nodes of different sizes. You cannot start, stop, or delete individual worker nodes. ·        To add Windows Azure worker nodes o   In HPC Cluster Manager: Node Management > Actions pane > Add Node à Add Node Wizard o   Select Deployment Method page - Add Azure Worker nodes o   Specify New Nodes page - select a worker node template, specify the number and size of the worker nodes ·        After you add worker nodes to the cluster, they are in the Not-Deployed state, and they have a health state of Unapproved. Before you can use the worker nodes to run jobs, you must start them and then bring them online. ·        Worker nodes are numbered consecutively in a naming series that begins with the root name AzureCN – this is non-configurable. Deploying Windows Azure Worker Nodes ·        To deploy the role instances in Windows Azure - start the worker nodes added to the HPC cluster and bring the nodes online so that they are available to run cluster jobs. This can be configured in the HPC Azure Worker Node Template – Azure Availability Policy -  to be automatic or manual. ·        The Start, Stop, and Delete actions take place on the set of worker nodes that are configured by a specific worker node template. You cannot perform one of these actions on a single worker node in a set. You also cannot perform a single action on two sets of worker nodes (specified by two different worker node templates). ·        ·          Starting a set of worker nodes deploys a set of worker role instances in Windows Azure, which can take some time to complete, depending on the number of worker nodes and the performance of Windows Azure. ·        To start worker nodes manually and bring them online o   In HPC Node Management > Navigation Pane > Nodes > List / Heat Map view - select one or more worker nodes. o   Actions pane > Start – in the Start Azure Worker Nodes dialog, select a node template. o   the state of the worker nodes changes from Not Deployed to track the provisioning progress – worker node Details Pane > Provisioning Log tab. o   If there were errors during the provisioning of one or more worker nodes, the state of those nodes is set to Unknown and the node health is set to Unapproved. To determine the reason for the failure, review the provisioning logs for the nodes. o   After a worker node starts successfully, the node state changes to Offline. To bring the nodes online, select the nodes that are in the Offline state > Bring Online. ·        Troubleshooting o   check node template. o   use telnet to test connectivity: telnet <ServiceName>.cloudapp.net 7999 o   check node status - Deployment status information appears in the service account information in the Windows Azure Portal - HPC queries this -  see  node status information for any failed nodes in HPC Node Management. ·        When role instances are deployed, file packages that were previously uploaded to the storage account using the hpcpack command are automatically installed. You can also upload file packages to storage after the worker nodes are started, and then manually install them on the worker nodes. see hpcpack (http://go.microsoft.com/fwlink/?LinkID=205514). ·        to remove a set of role instances in Windows Azure - stop the nodes by using HPC Cluster Manager (apply the Stop action). This deletes the role instances from the service and changes the state of the worker nodes in the HPC cluster to Not Deployed. ·        Each time that you start a set of worker nodes, two proxy role instances (size Small) are configured in Windows Azure to facilitate communication between HPC Cluster Manager and the worker nodes. The proxy role instances are not listed in HPC Cluster Manager after the worker nodes are added. However, the instances appear in the Windows Azure Portal. The proxy role instances incur charges in Windows Azure along with the worker node instances, and they count toward the quota of role instances in the subscription.

    Read the article

  • Latest Ubuntu stuck on "completing the ubuntu installation"

    - by Joesph Atkinson
    So my issue is after installing 12.10 Ubuntu using wubi.exe on a dedicated parition and rebooting the computer I am given the option to boot ubuntu, as I choose ubuntu I am brought to the "completing the ubuntu installation page" after it hits 0 on the countdown it just sits doing nothing. I left my computer on all day and still the same issue so I know its not just a slow install. Some say its because ubuntu cannot find a video driver for my card (xfx radeon 5770) which if that is the case is there a way i can run the install without it needing to look for drivers?

    Read the article

  • Desktop Fun: Triple Monitor Wallpaper Collection Series 1

    - by Asian Angel
    Triple monitor setups provide spacious amounts of screen real-estate but can be extremely frustrating to find good wallpapers for. Today we present the first in a series of wallpaper collections to help decorate your triple monitor setup with lots of wallpaper goodness. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. Special Note: The screen resolution sizes available for each of these wallpapers has been included to help you match them up to your individual settings as easily as possible. All images shown here are thumbnail screenshots of the largest size available for download. Available in the following resolutions: 3840*1024, 4096*1024, 4320*900, 4800*1200, 5040*1050, and 5760*1200. Available in the following resolutions: 4800*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, and 4800*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, and 4800*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, 5040*1050, and 5760*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, and 4800*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, and 5040*1050. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, and 5040*1050. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, and 4800*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, and 5040*1050. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4800*1200, and 5040*1050. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, 5040*1050, 5760*1200, and 7680*1600. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, 5040*1050, and 5760*1200. Available in the following resolutions: 5760*1200. Available in the following resolutions: 5760*1200. More Triple Monitor Goodness Beautiful 3 Screen Multi-Monitor Space Wallpaper Span the same wallpaper across multiple monitors or use a different wallpaper for each. Dual Monitors: Use a Different Wallpaper on Each Desktop in Windows 7, Vista or XP For more wallpapers be certain to see our great collections in the Desktop Fun section. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

    Read the article

  • How to Disable Ubuntu’s Guest Session Account

    - by Chris Hoffman
    Ubuntu and Linux Mint come with a “Guest Session” account, which anyone can log into from the login screen – no password required. If you’d rather restrict access to your computer, you can disable the guest account. This guest account is locked down and changes to it don’t persist between sessions – everyone that logs in gets a fresh desktop. Still, you may want to disable it to prevent other people from using your computer. Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless

    Read the article

  • Create a Persistent Bootable Ubuntu USB Flash Drive

    - by Trevor Bekolay
    Don’t feel like reinstalling an antivirus program every time you boot up your Ubuntu flash drive? We’ll show you how to create a bootable Ubuntu flash drive that will remember your settings, installed programs, and more! Previously, we showed you how to create a bootable Ubuntu flash drive that would reset to its initial state every time you booted it up. This is great if you’re worried about messing something up, and want to start fresh every time you start tinkering with Ubuntu. However, if you’re using the Ubuntu flash drive to diagnose and solve problems with your PC, you might find that a lot of problems require guess-and-test cycles. It would be great if the settings you change in Ubuntu and the programs you install stay installed the next time you boot it up. Fortunately, Universal USB Installer, a great little program from Pen Drive Linux, can do just that! Note: You will need a USB drive at least 2 GB large. Make sure you back up any files on the flash drive because this process will format the drive, removing any files currently on it. Once Ubuntu has been installed on the flash drive, you can move those files back if there is enough space. Put Ubuntu on your flash drive Universal-USB-Installer.exe does not need to be installed, so just double click on it to run it wherever you downloaded it. Click Yes if you get a UAC prompt, and you will be greeted with this window. Click I Agree. In the drop-down box on the next screen, select Ubuntu 9.10 Desktop i386. Don’t worry if you normally use 64-bit operating systems – the 32-bit version of Ubuntu 9.10 will still work fine. Some useful tools do not have 64-bit versions, so unless you’re planning on switching to Ubuntu permanently, the 32-bit version will work best. If you don’t have a copy of the Ubuntu 9.10 CD downloaded, then click on the checkbox to Download the ISO. You’ll be prompted to launch a web browser; click Yes. The download should start immediately. When it’s finished, return the the Universal USB Installer and click on Browse to navigate to the ISO file you just downloaded. Click OK and the text field will be populated with the path to the ISO file. Select the drive letter that corresponds to the flash drive that you would like to use from the dropdown box. If you’ve backed up the files on this drive, we recommend checking the box to format the drive. Finally, you have to choose how much space you would like to set aside for the settings and programs that will be stored on the flash drive. Considering that Ubuntu itself only takes up around 700 MB, 1 GB should be plenty, but we’re choosing 2 GB in this example because we have lots of space on this USB drive. Click on the Create button and then make yourself a sandwich – it will take some time to install no matter how fast your PC is. Eventually it will finish. Click Close. Now you have a flash drive that will boot into a fully capable Ubuntu installation, and any changes you make will persist the next time you boot it up! Boot into Ubuntu If you’re not sure how to set your computer to boot using the USB drive, then check out the How to Boot Into Ubuntu section of our previous article on creating bootable USB drives, or refer to your motherboard’s manual. Once your computer is set to boot using the USB drive, you’ll be greeted with splash screen with some options. Press Enter to boot into Ubuntu. The first time you do this, it may take some time to boot up. Fortunately, we’ve found that the process speeds up on subsequent boots. You’ll be greeted with the Ubuntu desktop. Now, if you change settings like the desktop resolution, or install a program, those changes will be permanently stored on the USB drive! We installed avast! Antivirus, and on the next boot, found that it was still in the Accessories menu where we left it. Conclusion We think that a bootable Ubuntu USB flash drive is a great tool to have around in case your PC has problems booting otherwise. By having the changes you make persist, you can customize your Ubuntu installation to be the ultimate computer repair toolkit! Download Universal USB Installer from Pen Drive Linux Similar Articles Productive Geek Tips Create a Bootable Ubuntu USB Flash Drive the Easy WayCreate a Bootable Ubuntu 9.10 USB Flash DriveReset Your Ubuntu Password Easily from the Live CDHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupHow To Setup a USB Flash Drive to Install Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7

    Read the article

  • can't start vino VNC service on Ubuntu 12.04

    - by user1689961
    I just installed vino, but when I run it, I get the following error. # ./start_vnc (vino-server:2502): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion `global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed ** Message: The desktop sharing service is already running, exiting. MORE DETAILS: UltraVNC client running on a Windows computer can login and shows the Ubuntu desktop, and controls the Ubuntu mouse to do things, but the VNC client view at the Windows computer does NOT show any changes to the display at the Ubuntu desktop, only the original desktop view at the time of VNC client login. UPDATE I solved it by following the askubuntu post: "VNC session very slow in 12.04 compared to older versions", which said to do this: gsettings set org.gnome.Vino disable-xdamage true ..and it worked. But should I be concerned about the error messages?

    Read the article

  • Installation Won't Finish

    - by Joey G
    I installed Ubuntu 12.10 (32-bit) on my Acer Aspire One notebook and replaced the Windows 8 Consumer Preview. Everything went fine, but right before the installation finished, it got stuck. The loading bar at the bottom is full, and it says "Copying installation logs," but my mouse won't move and it's been at this point for almost an hour. Also, the mouse is in the loading spin, so I know my computer didn't freeze. Should I just restart now? I'm not sure if it's at the last stage, but it seems like it is, and this has taken more than the rest of the installation together. EDIT- I had my computer go in sleep mode for a minute and now I can move the mouse again. When I click the "Copying.." part, it says "Activation (eth1) Stage 4 of 5 complete" but "5 of 5" (I assume that comes next) isn't starting.

    Read the article

  • Stream Media and Live TV Across the Internet with Orb

    - by DigitalGeekery
    Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next.   Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next  to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV.   If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip.   You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Next choose an analog provider, if necessary, and click Next.   Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next.   Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right…   …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly.   Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again.   Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking.   Playback will begin in the default media player for the streaming format.   Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format.   Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications  and select Control Panel. You can also click Settings at the top right.   Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS.   Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished.    Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile.  By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device.   Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App.  Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and  password and click OK.   From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon.   Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

    Read the article

  • HTG Explains: Why You Shouldn’t Use a Task Killer On Android

    - by Chris Hoffman
    Some people think that task killers are important on Android. By closing apps running in the background, you’ll get improved performance and battery life – that’s the idea, anyway. In reality, task killers can reduce your performance and battery life. Task killers can force apps running in the background to quit, removing them from memory. Some task killers do this automatically. However, Android can intelligently manage processes on its own – it doesn’t need a task killer. How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

    Read the article

  • Antivirus Free Antivirus Download

    Many computer problems are caused by viruses and malware on your computer. The best and easiest way to correct this is to use a recognized antivirus and keep it updated. Antivirus free download at: http://antivirus-freedownloads.blogspot.com Links Web Content: http://antivirus-freedownloads.blogspot.com http://antivirus-freedownloads.blogspot.com/2010/06/free-antivirus-software-norton.html Antivirus Free Download Microsoft best FREE DOWNLOAD: http://antivirus-freedownloads.blogspot.com  read moreBy ciem novDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Open Different Types of New Google Documents Directly with These 7 New Chrome Apps

    - by Asian Angel
    Every time you want to open a new document of one kind or another in Google Drive you have to go through the whole ‘menu’ and ‘type selection’ process to do so. Now you can open the desired type directly from the New Tab Page using these terrific new Chrome apps from Google! The best part about this new set of apps is the ability to choose only the ones you want and/or need, then be able to start working on those new documents quickly without all the ‘selection’ hassle. How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

    Read the article

  • Ada and 'The Book'

    - by Phil Factor
    The long friendship between Charles Babbage and Ada Lovelace created one of the most exciting and mysterious of collaborations ever to have resulted in a technological breakthrough. The fireworks that created by the collision of two prodigious mathematical and creative talents resulted in an invention, the Analytical Engine, which went on to change society fundamentally. However, beyond that, we just don't know what the bulk of their collaborative work was about:;  it was done in strictest secrecy. Even the known outcome of their friendship, the first programmable computer, was shrouded in mystery. At the time, nobody, except close friends and family, had any idea of Ada Byron's contribution to the invention of the ‘Engine’, and how to program it. Her great insight was published in August 1843, under the initials AAL, standing for Ada Augusta Lovelace, her title then being the Countess of Lovelace. It was contained in a lengthy ‘note’ to her translation of a publication that remains the best description of Babbage's amazing Analytical Engine. The secret identity of the person behind those enigmatic initials was finally revealed by Prince de Polignac who, seventy years later, wrote to Ada's daughter to seek confirmation that her mother had, indeed, been the author of the brilliant sentences that described so accurately how Babbage's mechanical computer could be programmed with punch-cards. L.F. Menabrea's paper on the Analytical Engine first appeared in the 'Bibliotheque Universelle de Geneve' in October 1842, and Ada translated it anonymously for Taylor's 'Scientific Memoirs'. Charles Babbage was surprised that she had not written an original paper as she already knew a surprising amount about the way the machine worked. He persuaded her to at least write some explanatory notes. These notes ended up extending to four times the length of the original article and represented the first published account of how a machine could be programmed to perform any calculation. Her example of programming the Bernoulli sequence would have worked on the Analytical engine had the device’s construction been completed, and gave Ada an unassailable claim to have invented the art of programming. What was the reason for Ada's secrecy? She was the only legitimate child of Lord Byron, who was probably the best known celebrity of the age, so she was already famous. She was a senior aristocrat, with titles, a fortune in money and vast estates in the Midlands. She had political influence, and was the cousin of Lord Melbourne, who was the Prime Minister at that time. She was friendly with the young Queen Victoria. Her mathematical activities were a pastime, and not one that would be considered by others to be in keeping with her roles and responsibilities. You wouldn't dare to dream up a fictional heroine like Ada. She was dazzlingly beautiful and talented. She could speak several languages fluently, and play some musical instruments with professional skill. Contemporary accounts refer to her being 'accomplished in science, art and literature'. On top of that, she was a brilliant mathematician, a talent inherited from her mother, Annabella Milbanke. In her mother's circle of literary and scientific friends was Charles Babbage, and Ada's friendship with him dates from her teenage zest for Mathematics. She was one of the first people he'd ever met who understood what he had attempted to achieve with the 'Difference Engine', and with whom he could converse as intellectual equals. He arranged for her to have an education from the most talented academics in the country. Ada melted the heart of the cantankerous genius to the point that he became a faithful and loyal father-figure to her. She was one of the very few who could grasp the principles of the later, and very different, ‘Analytical Engine’ which was designed from the start to tackle a variety of tasks. Sadly, Ada Byron's life ended less than a decade after completing the work that assured her long-term fame, in November 1852. She was dying of cancer, her gambling habits had caused her to run up huge debts, she'd had more than one affairs, and she was being blackmailed. Her brilliant but unempathic mother was nursing her in her final illness, destroying her personal letters and records, and repaying her debts. Her husband was distraught but helpless. Charles Babbage, however, maintained his steadfast paternalistic friendship to the end. She appointed her loyal friend to be her executor. For years, she and Babbage had been working together on a secret project, known only as 'The Book'. We have a clue to what it was in a letter written by her nine years earlier, on 11th August 1843. It was a joint project by herself and Lord Lovelace, her husband, and was intended to involve Babbage's 'undivided energies'. It involved 'consulting your Engine' (it required Babbage’s computer). The letter gives no hint about the project except for the high-minded nature of its purpose, and its highly mathematical nature.  From then on, the surviving correspondence between the two gives only veiled references to 'The Book'. There isn't much, since Babbage later destroyed any letters that could have damaged her reputation within the Establishment. 'I cannot spare the book today, which I am very sorry for. At the moment I want it for constant reference, but I think you can have it tomorrow' (Oct 1844)  And 'I will send you the book directly, and you can say, when you receive it, how long you will want to keep it'. (Nov 1844)  The two of them were obviously intent on the work: She writes, four years later, 'I have an engagement for Wednesday which will prevent me from attending to your wishes about the book' (Dec 1848). This was something that they both needed to work on, but could not do in parallel: 'I will send the book on Tuesday, and it can be left with you till Friday' (11 Feb 1849). After six years work, it had been so well-handled that it was beginning to fall apart: 'Don't forget the new cover you promised for the book. The poor book is very shabby and wants one' (20 Sept 1849). So what was going on? The word 'book' was not a code-word: it was a real book, probably a 'printer's blank', plain paper, but properly bound so printers and publishers could show off how the published work might look. The hints from the correspondence are of advanced mathematics. It is obvious that the book was travelling between them, back and forth, each one working on it for less than a week before passing it back. Ada and her husband were certainly involved in gambling large sums of money on the horses, and so most biographers have concluded that the three of them were trying to calculate the mathematical odds on the horses. This theory has three large problems. Firstly, Ada's original letter proposing the project refers to its high-minded nature. Babbage was temperamentally opposed to gambling and would scarcely have given so much time to the project, even though he was devoted to Ada. Secondly, Babbage would have very soon have realized the hopelessness of trying to beat the bookies. This sort of betting never attracts his type of intellectual background. The third problem is that any work on calculating the odds on horses would not need a well-thumbed book to pass back and forth between them; they would have not had to work in series. The original project was instigated by Ada, along with her husband, William King-Noel, 1st Earl of Lovelace. Charles Babbage was invited to join the project after the couple had come up with the idea. What could William have contributed? One might assume that William was a Bertie Wooster character, addicted only to the joys of the turf, but this was far from the truth. He was a scientist, a Cambridge graduate who was later elected to be a Fellow of the Royal Society. After Eton, he went to Trinity College, Cambridge. On graduation, he entered the diplomatic service and acted as secretary under Lord Nugent, who was Lord Commissioner of the Ionian Islands. William was very friendly with Babbage too, able to discuss scientific matters on equal terms. He was a capable engineer who invented a process for bending large timbers by the application of steam heat. He delivered a paper to the Institution of Civil Engineers in 1849, and received praise from the great engineer, Isambard Kingdom Brunel. As well as being Lord Lieutenant of the County of Surrey for most of Victoria's reign, he had time for a string of scientific and engineering achievements. Whatever the project was, it is unlikely that William was a junior partner. After Ada's death, the project disappeared. Then, two years later, Babbage, through one of his occasional outbursts of temper, demonstrated that he was able to decrypt one of the most powerful of secret codes, Vigenère's autokey cipher.  All contemporary diplomatic and military messages used a variant of this cipher. Babbage had made three important discoveries, namely, the mathematical law of this cipher, the principle of the key periodicity, and the technique of the symmetry of position. The technique is now known as the Kasiski examination, also called the Kasiski test, but Babbage got there first. At one time, he listed amongst his future projects, the writing of a book 'The Philosophy of Decyphering', but it never came to anything. This discovery was going to change the course of history, since it was used to decipher the Russians’ military dispatches in the Crimean war. Babbage himself played a role during the Crimean War as a cryptographical adviser to his friend, Rear-Admiral Sir Francis Beaufort of the Admiralty. This is as much as we can be certain about in trying to make sense of the bulk of the time that Charles Babbage and Ada Lovelace worked together. Nine years of intensive work, involving the 'Engine' and a great deal of mathematics and research seems to have been lost: or has it? I've argued in the past http://www.simple-talk.com/community/blogs/philfactor/archive/2008/06/13/59614.aspx that the cracking of the Vigenère autokey cipher, was a fundamental motive behind the British Government's support and funding of the 'Difference Engine'. The Duke of Wellington, whose understanding of the military significance of being able to read enemy dispatches, was the most steadfast advocate of the project. If the three friends were actually doing the work of cracking codes by mathematical techniques that used the techniques of key periodicity, and symmetry of position (the use of a book being passed quickly to and fro is very suggestive), intending to then use the 'Engine' to do the routine cracking of each dispatch, then this is a rather different story. The project was Ada and William's idea. (William had served in the diplomatic service and would be familiar with the use of codes). This makes Ada Lovelace the initiator of a project which, by giving both Britain, and probably the USA, a diplomatic and military advantage in the second part of the Nineteenth century, changed world history. Ada would never have wanted any credit for cracking the cipher, and developing the method that rendered all contemporary military and diplomatic ciphering techniques nugatory; quite the reverse. And it is clear from the gaps in the record of the letters between the collaborators that the evidence was destroyed, probably on her request by her irascible but intensely honorable executor, Charles Babbage. Charles Babbage toyed with the idea of going public, but the Crimean war put an end to that. The British Government had a valuable secret, and intended to keep it that way. Ada and Charles had quite often discussed possible moneymaking projects that would fund the development of the Analytic Engine, the first programmable computer, but their secret work was never in the running as a potential cash cow. I suspect that the British Government was, even then, working on the concealment of a discovery whose value to the nation depended on it remaining so. The success of code-breaking in the Crimean war, and the American Civil war, led to the British and Americans  subsequently giving much more weight and funding to the science of decryption. Paradoxically, this makes Ada's contribution even closer to the creation of Colossus, the first digital computer, at Bletchley Park, specifically to crack the Nazi’s secret codes.

    Read the article

  • Ask the Readers: Do You Prefer Computers, Game Consoles, or Other Devices for Your Gaming Needs?

    - by Asian Angel
    Nearly everyone who has access to a computer will play games on it at some point, but many people also use a separate game platform as well. What we would like to know this week is if you prefer using a computer, game consoles, or other devices for your gaming needs. Photo of Faith and Kate Connors from Mirror’s Edge by Tamahikari Tammas. Video games are a perfect way to relax and have fun at home (or at work if you can sneak in some game time!). The increasing variety of devices available with each passing year are making it easier to have access to a gaming platform to suit your needs or “darkest gaming desires”. For many people their computers are the perfect platform…they can play Flash-based games in their browsers, use the default set of games that come with their system, and install any extras that catch their eyes. The added benefit is that when game time is over they can drop right into their browsing, e-mail, personal projects, or work without having to switch hardware. The convenience of the “all-in-one” platform is certainly appealing! Perhaps you prefer to use your computer for other activities outside of gaming and own one or more separate game consoles. You might have chosen an Xbox, Playstation, or Nintendo for example. Maybe a hand-held is preferable for its’ size and portability. Then there are mobile phones and the iPad… With so many options it may feel hard to choose the right platform(s) without a good bit of research regarding display, availability of games for a particular platform, how long before the platform starts to become “obsolete”, etc. What we would like to know this week is which gaming platform you prefer. Is there only one that you choose to use or do you use multiple platforms for gaming? Is there a particular reason such as convenience for your choices? You may even be keeping an older platform around just for a certain game (or games) made for it. Are there any recommendations or advice that you would like to share with your fellow readers? Let us know in the comments! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Apture Highlights Turns Your Cursor into a Search Tool Add Classic Sci-Fi Goodness to Your Desktop with the Matrix Theme for Windows 7 You Can’t Walk Straight without Visual Markers [Video] Lord of the Rings Movie Parody Double Feature [Video] Turn a Webpage into an Asteroids-Styled Shooting Game in Opera Dolphin Browser Mini Leaves Beta; Sports New GUI, Easy Bookmarking, and More

    Read the article

  • CodePlex Daily Summary for Wednesday, June 02, 2010

    CodePlex Daily Summary for Wednesday, June 02, 2010New ProjectsBackupCleaner.Net: A C#.Net-based tool for automatically removing old backups selectively. It can be used when you already make daily backups on disk, and want to cle...C# Dotnetnuke Module development Template for Visual Studio 2010: C# DNN Module Development template for Visual Studio 2010 Get a head-start on DNN Module development. Whether you're a pro or just starting with D...Christoc's DotNetNuke C# Module Development Template: A quick and easy to use C# Module development template for DotNetNuke 5, Visual Studio 2008.Client per la digitalizzazione di documenti integrato con DotNetNuke: Questo applicativo in ambiente windows 32bit consente di digitalizzare documenti con piu scanner contemporaneamente, processare OCR in 17 Lingue (p...ContainerOne - C# application server: An application server completely written in c# (.net 4.0).Drop7 Silverlight: It's a clone of the original Drop7 written in Silverlight (C#). Echo.Net: Echo.Net is an embedded task manager for web and windows apps. It allows for simple management of background tasks at specific times. It's develope...energy: Smartgrid Demand Response ImplementationGenerate Twitter Message for Live Writer: This is a plug-in for Windows Live Writer that generates a twitter message with your blog post name and a TinyUrl link to the blog post. It will d...HomingCMS.Net: A lightweight cms.Information Système & Shell à distance: Un web service qui permet d'avoir des informations sur le système et de lancer de commande (terminal) à distance.Javascript And Jquery: gqq's javascript and jquery examplesMemory++: "Tweak the memory to speed up your computer" Memory ++ is basically an application that will speed up your computer ensuring comfort in their norma...Microformat Parsers for .NET: Microformat's Parsers for .NET helps you to collect information you run into on the web, that is stored by means of microformats. It's written in C...MoneyManager: Trying to make Personal Finances management System for my needs. Microsoft stopped to support MSMoney - it makes me so sad, so I wanna to make my ...Open source software for running a financial markets trading business: The core conceptual model will support running a business in the financial markets, for example running a trading exchange business.Ovik: Open Video Converter with simple and intuitive interface for converting video files to the open formats.Oxygen Smil Player: The <project name> is a open a-smil player implementation that is meaned to be connected to a Digital Signage CMS like Oxygen media platform ( www....Protect The Carrot: Protect The Carrot is a small fastpaced XNA game. You are a farmer whose single carrot is under attack by ravenous rabbits. You have to shoot the r...Race Day Commander: The core project is designed to support coaches of "long distance" or "endurance" sporting events coach their athletes during a race. The idea bein...Raygun Diplomacy: Raygun Diplomacy is an action shooter sandbox game set in a futuristic world. It will use procedural generation for the world, weapons, and vehicle...Resx-Translator-Bot: Resx-Translator-Bot uses Google Tanslate to automatically translate the .resx-files in your .NET and ASP.NET applications.Sistema de Expedición del Permiso Único de Siembra: Sistema de Expedición del Permiso Único de Siembra.SiteOA: 一个基于asp.net mvc2的OAStraighce: This is a low-featured, cyclic (log files reside in appname\1.txt to at mose 31.txt), thread-safe and non-blocking TraceListener with some extensio...Touch Mice: Touch Mice turns multiple mice on a computer into individual touch devices. This allows you to create multi-touch applications using the new touch...TStringValidator: A project helper to validate strings. Use this class to hold your regex strings for use with any project's string validation.Ultimate Dotnetnuke Skin Object: Ultimate Skin Object is a Dotnetnuke 5.4.2+ extension that will allow you to easily change your skins doc type, remove unneeded css files, inject e...Ventosus: Ventosus is an upcoming partially text-based game. No further information is available at this time.vit: vit based on asp.net mvcW7 Auto Playlist Generator: Purpose: This application is designed to create W7MC playlist automatically whenever you want. You can select if you want the playlist sorted Alpha...W7 Video Playlist Creator: Purpose: This program allows you to quickly create wvx video play list for Windows Media Center. This functionality is not included in WMC and is u...New ReleasesBCryptTool: BCryptTool v0.2.1: The Microsoft .NET Framework 4.0 is needed to run this program.BFBC2 PRoCon: PRoCon 0.5.2.0: Notes available on phogue.netC# Dotnetnuke Module development Template for Visual Studio 2010: DNNModule 1.0: This is the initial release of DNNModule as was available for download from http://www.subodh.com/Projects/DNNModule In this release: Contains one...Client per la digitalizzazione di documenti integrato con DotNetNuke: Versione 3.0.1: Versione 3.0.1CommonLibrary.NET: CommonLibrary.NET 0.9.4 - Final Release: A collection of very reusable code and components in C# 3.5 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars,...Community Forums NNTP bridge: Community Forums NNTP Bridge V20: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Community Forums NNTP bridge: Community Forums NNTP Bridge V21: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...DirectQ: Release 1.8.4: Significant bug fixes and improvments over 1.8.3c; there may be some bugs that I haven't caught here as development became a little disjointed towa...DotNetNuke 5 Thai Language Pack: 1.0.1: Fixed Installation Problem. Version 1.0 -> 1.0.1 Type : Character encoding. Change : ().dnn description file to "ไทย (ไทย)".dnnEcho.Net: Echo.Net 1.0: Initial release of Echo.Net.Extend SmallBasic: Teaching Extensions v.018: ShapeMaker, Program Window, Timer, and many threading errors fixedExtend SmallBasic: Teaching Extensions v.019: Added Rectangles to shapemaker, and the bubble quizGenerate Twitter Message for Live Writer: Final Source Code Plus Binaries: Compete C# source code available below. I have also included the binary for those that just want to run it.GoogleMap Control: GoogleMap Control 4.5: Map and map events are only functional. New state, persistence and event implementation in progress. Javascript classes are implemented as MS AJAX ...Industrial Dashboard: ID 3.1: -Added new widget IndustrialSlickGrid. -Added example with IndustrialChart.LongBar: LongBar 2.1 Build 310: - Library: Double-clicking on tile will install it - Feedback: Now you can type your e-mail and comment for errorMavention: Mavention Insert Lorem ipsum: A Sandbox Solution for SharePoint 2010 that allows you to easily insert Lorem ipsum text into RTE. More information and screenshots available @ htt...Memory++: Memory ++: Tweak the memory to speed up your computer Memory is basically an application that will speed up your computer ensuring comfort in their normal ac...MyVocabulary: Version 2.0: Improvements over version 1.0: Several bug fixes New shortcuts added to increase usability A new section for testing verbs was addednopCommerce. Open Source online shop e-commerce solution.: nopCommerce 1.60: You can also install nopCommerce using the Microsoft Web Platform Installer. Simply click the button below: nopCommerce To see the full list of f...Nuntio Content: Nuntio Content 4.2.1: Patch release that fixes a couple of minor issues with version numbers and priority settings for role content. The release one package for DNN 4 an...Ovik: Ovik v0.0.1 (Preview Release): This is a very early preview release of Ovik. It contains only the pure processes of selecting files and launching a conversion process. Preview r...PHPExcel: PHPExcel 1.7.3c Production: This is a patch release for 26477. Want to contribute?Please refer the Contribute page. DonationsDonate via PayPal. If you want to, we can also a...PowerShell Admin Modules: PAM 0.2: Version 0.2 contains the PAMShare module with Get-Share Get-ShareAccessMask Get-ShareSecurity New-Share Remove-Share Set-Share and the PAMath modu...Professional MRDS: RDS 2008 R3 Release: This is an updated version of the code to work with RDS 2008 R3 (version 2.2.76.0). IMPORTANT NOTE These samples are supplied as a ZIP file. Unzip...Protect The Carrot: First release: We provide two ways to install the game. The first is PTC 1.0.0.0 Zip which contains a Click-Once installer (the DVD type since codeplex does not...PST File Format SDK: PST File Format SDK v0.2.0: Updated version of pstsdk with several bug fixes, including: Improved compiler support (several changes, including two patches from hub) Fixed Do...Race Day Commander: Race Day Commander v1: First release. The exact code that was written on the day in 6 hours.Resx-Translator-Bot: Release 1.0: Initial releaseSalient.StackApps: JavaScript API Wrapper beta 2: This is the first draft of the generated JS wrapper. Added basic test coverage for each route that can also serve as basic usage examples. More i...SharePoint 2010 PowerShell Scripts & Utilities: PSSP2010 Utils 0.2: Added Install-SPIFilter script cmdlet More information can be found at http://www.ravichaganti.com/blog/?p=1439SharePoint Tools from China Community: ECB菜单控制器: ECB菜单控制器Shopping Cart .NET: 1.5: Shopping Cart .NET 1.5 has received an upgrade to .NET 4.0 along with SQL Server 2005/8. There is a new AJAX Based inventory system that helps you ...sMODfix: sMODfix v1.0b: Added: provisional support for ecm_v54 Added: provisional support for gfx_v88SNCFT Gadget: SNCFT gadget v1: cette version est la version 1 de ma gadgetSnippet Designer: Snippet Designer 1.3: Change logChanges for Visual Studio 2010Fixed bug where "Export as Snippet" was failing in a website project Changed Snippet Explorer search to u...sNPCedit: sNPCedit v0.9b: + Fixed: structure of resources + Changed: some labels in GUISoftware Is Hardwork: Sw. Is Hw. Lib. 3.0.0.x+05: Sw. Is Hw. Lib. 3.0.0.x+05SQL Server PowerShell Extensions: 2.2.3 Beta: Release 2.2 re-implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 9 modules with 133 advanced functions, 2 cmdlets and 7 scri...StackOverflow.Net: Preview Beta: Goes with the Stack Apps API version 0.8Ultimate Dotnetnuke Skin Object: Ultimate Skin Object V1.00.00: Ultimate Skin Object is a Dotnetnuke 5.4.2+ extension that will allow you to easily change your skins doc type, remove unneeded css files, inject e...VCC: Latest build, v2.1.30601.0: Automatic drop of latest buildVelocity Shop: JUNE 2010: Source code aligned to .NET Framework 4.0, ASP.NET 4.0 and Windows Server AppFabric Caching RC.ViperWorks Ignition: ViperWorks_5.0.1005.31: ViperWorks Ignition Source, version 5.0.1005.31.Visual Studio 2010 and Team Foundation Server 2010 VM Factory: Session Recordings: This release contains the "raw" and undedited session recordings and slides delivered by the team. 2010-06-01 Create package and add two session r...W7 Auto Playlist Generator: Source Code plus Binaries: Compete C# and WinForm source code available below. I have also included the binary for those that just want to run it.W7 Video Playlist Creator: Source Code plus Binaries: Compete C# and WPF source code available below. I have also included the binary for those that just want to run it.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesASP.NETMost Active ProjectsCommunity Forums NNTP bridgepatterns & practices – Enterprise LibraryGMap.NET - Great Maps for Windows Forms & PresentationBlogEngine.NETIonics Isapi Rewrite FilterMirror Testing SystemRawrCaliburn: An Application Framework for WPF and SilverlightPHPExcelCustomer Portal Accelerator for Microsoft Dynamics CRM

    Read the article

  • OpenGL ES 2.0: Using VBOs?

    - by Bunkai.Satori
    OpenGL VBOs (vertex buffer objects) have been developed to improve performance of OpenGL (OpenGL ES 2.0 in my case). The logic is that with the help of VBOs, the data does not need to be copied from client memory to graphics card on per frame basis. However, as I see it, the game scene changes continuously: position of objects change, their scaling and rotating change, they get animated, they explode, they get spawn or disappear. In such highly dynamic environment, such as computer game scene is, what is the point of using VBOs, if the VBOs would need to be constructed on per-frame basis anyway? Can you please help me to understand how to practically take beneif of VBOs in computer games? Can there be more vertex based VBOs (say one per one object) or there must be always exactly only one VBO present for each draw cycle?

    Read the article

  • Unity3d generating a file in iOS and saving it on a linux machine

    - by N0xus
    I've done a little research and don't know if the following is possible. At the moment I have created a small application in Unity that generates an XML file. This file will be used to help set up my game. It's done in Unity due to it being cross platform with no need to re-write a single line of code. Eventually this will run on an iPad. However, my game will be running on a linux computer and I need to pass over the XML file to the computer that will be running the final game (please don't ask why I'm doing that, it's something I need to do). So what I want to know is the following: Can I generate my XML file on an iPad and have that XML file be saved, and transmitted to a linux machine, without the need to manually copy the file over. If so, how is this possible?

    Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >