Search Results

Search found 6395 results on 256 pages for 'weird behaviour'.

Page 223/256 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

• Emacs: Often switching between Emacs and my IDE's editor, how can I 'synch' the file?

  - by WizardOfOdds

  I very often need to do some Emacs magic on some files and I need to go back and forth my IDE (IntelliJ IDEA) and Emacs. When a change is made under Emacs (and after I've saved the file) and I go back to IntelliJ the change appears immediately (if I recall correctly I configured IntelliJ to "always reload file when a modification is detected on disk" or something like that). I don't even need to reload: as soon as IntelliJ IDEA gains focus, it instantly reloads the file (and I hence have immediately access to the modifications I made from Emacs). So far, so very good. However "the other way round", it doesn't work yet. Can I configure Emacs so that everytime a file is changed on disk it reloads it? Or make Emacs, everytime it "gains focus", verify if any file currently opened has been modified on disk? I know I can start modifying the buffer under Emacs and it shall instantly warn that it has been modified, but I'd rather have it do it immediately (for example if I used my IDE to do some big change, when I come back to Emacs what I see may not be at all anymore what the file contains and it's a bit weird).

  Read the article

• How do I make a lock that allows only ONE thread to read from the resource ?

  - by mare

  I have a file that holds an integer ID value. Currently reading the file is protected with ReaderWriterLockSlim as such: public int GetId() { _fileLock.EnterUpgradeableReadLock(); int id = 0; try { if(!File.Exists(_filePath)) CreateIdentityFile(); FileStream readStream = new FileStream(_filePath, FileMode.Open, FileAccess.Read); StreamReader sr = new StreamReader(readStream); string line = sr.ReadLine(); sr.Close(); readStream.Close(); id = int.Parse(line); return int.Parse(line); } finally { SaveNextId(id); // increment the id _fileLock.ExitUpgradeableReadLock(); } } The problem is that subsequent actions after GetId() might fail. As you can see the GetId() method increments the ID every single time, disregarding what happens after it has issued an ID. The issued ID might be left hanging (as said, exceptions might occur). As the ID is incremented, some IDs might be left unused. So I was thinking of moving the SaveNextId(id) out, remove it (the SaveNextId() actually uses the lock too, except that it's EnterWriteLock). And call it manually from outside after all the required methods have executed. That brings out another problem - multiple threads might enter the GetId() method before the SaveNextId() gets executed and they might all receive the same ID. I don't want any solutions where I have to alter the IDs after the operation, correcting them in any way because that's not nice and might lead to more problems. I need a solution where I can somehow callback into the FileIdentityManager (that's the class that handles these IDs) and let the manager know that it can perform the saving of the next ID and then release the read lock on the file containing the ID. Essentialy I want to replicate the relational databases autoincrement behaviour - if anything goes wrong during row insertion, the ID is not used, it is still available for use but it also never happens that the same ID is issued. Hopefully the question is understandable enough for you to provide some solutions..

  Read the article

• Name lookup for names not dependent on template parameter in VC++2008 Express. Is it a bug?

  - by Maciej H

  While experimenting a bit with C++ templates I managed to produce this simple code, for which the output is different, than I expected according to my understanding of C++ rules. void bar(double d) { std::cout << "bar(double) function called" << std::endl; } template <typename T> void foo(T t) { bar(3); } void bar(int i) { std::cout << "bar(int) function called" << std::endl; } int main() { foo(3); return 0; } When I compile this code is VC++2008 Express function bar(int) gets called. That would be the behaviour I would expect if bar(3);in the template body was dependent on the template parameter. But it's not. The rule I found here says "The C++ standard prescribes that all names that are not dependent on template parameters are bound to their present definitions when parsing a template function or class". Am I wrong, that "present definition" of bar when parsing the template function foo is the definition of void bar(double d);? Why it's not the case if I am wrong. There are no forward declarations of bar in this compilation unit.

  Read the article

• RichTextBox text is not shown C#

  - by user271077

  using richtextbox control programatically i'm appending text to the richtextbox . richTextBox1.AppendText("hello"); somehow the text appears in the richTextBox1.Text but is not shown in the form. any idea of what might be the problem? (I checked the forecolor seems ok). Thanks in advance Edit: found the root cause (had by mistake the initializeComponent() twice. ) private void InitializeComponent() { this.richTextBox1 = new System.Windows.Forms.RichTextBox(); this.SuspendLayout(); // // richTextBox1 // this.richTextBox1.Location = new System.Drawing.Point(114, 104); this.richTextBox1.Name = "richTextBox1"; this.richTextBox1.Size = new System.Drawing.Size(100, 96); this.richTextBox1.TabIndex = 0; this.richTextBox1.Text = ""; // // Form1 // this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F); this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font; this.ClientSize = new System.Drawing.Size(284, 262); this.Controls.Add(this.richTextBox1); this.Name = "Form1"; this.Text = "Form1"; this.Load += new System.EventHandler(this.Form1_Load); this.ResumeLayout(false); } public Form1() { InitializeComponent(); InitializeComponent(); } private void Form1_Load(object sender, EventArgs e) { richTextBox1.AppendText("hello world"); }` but still curious about why did this cause this weird behavior?

  Read the article

• c++ malloc segmentation fault

  - by chnet

  I have a problem about malloc(). It is weird. My code is in the following. I use random generator to generate elements for an array. The array is opened by malloc(). If the array size is smaller than 8192, it is OK. If the size is larger than 8192, it shows segment fault. void random_generator(int num, int * array) { srand((unsigned)time(0)); int random_integer; for(int index=0; index< num; index++){ random_integer = (rand()%10000)+1; *(array+index) = random_integer; cout << index << endl; } } int main() { int array_size = 10000; int *input_array; input_array = (int*) malloc((array_size)); random_generator(8192, input_array); // if the number is larger than 8192, segment fault free(input_array); }

  Read the article

• Using "margin: 0 auto;" in Internet Explorer 8

  - by stusmith

  I'm in the process of doing some advance IE8 testing, and it seems that the old technique of using "margin: 0 auto;" doesn't work in all cases in IE8. The following piece of HTML gives a centered button in FF3, Opera, Safari, Chrome, IE7, and IE8 compat, but NOT in IE8 standard: <div style="height: 500px; width: 500px; background-color: Yellow;"> <input type="submit" style="display: block; margin: 0 auto;" /> </div> (As a work-around I can add an explicit width to the button). So the question is: which browsers are correct? Or is this one of those cases where the behaviour is undefined? (My thinking is that all the browsers are incorrect - shouldn't the button be 100% width if it's "display: block"?) UPDATE: I'm being a dunce. Since input isn't a block-level element, I should have just contained it within a div with "text-align: center". Having said that, for curiosity's sake, I'd still like to know whether the button should or shouldn't be centered in the example above. FOR THE BOUNTY: I know I'm doing odd things in the example, and as I point out in the update, I should have just aligned it center. For the bounty, I'd like references to the specs that answer: If I set "display: block", should the button be width 100%? Or is this undefined? Since the display is block, should "margin: 0 auto;" center the button, or not, or undefined?

  Read the article

• "Permission denied" with Internet Explorer and jQuery

  - by rallex

  I try to do an AJAX call with jQuery and $.post in Internet Explorer, but all I get is an error saying "Permission denied". The problem is kinda weird since it occurs only when I access a page after I was on any other page. For instance I type the URL in the adress line and let IE load the page. Then I click on a button so the script should start loading JSON data. (The script providing the data lies on the same server and I access it with a relative URL, so using a different domain is not the problem here. Even tried to use a absolute URL with the same host part.) But when I refresh the page then and try it again it works! Same thing when I come to that page from another page. At first nothing works, but when I click "refresh" everything is fine. IE gives me the error message "Permission denied" while in every other browser I don't notice this behaviour. Since I have tried many things and still cannot imagine where the problem lies I'd like to ask you what you think the problem might be?

  Read the article

• Detailstext in TableView from Coredata Iphone

  - by user554867

  Hey, that is my first question here at stackoverflow. Let me try to be specific as I can. The project is as follows: I am trying to parse an xml file in an iphone app, which works already. I am saving the parsed data into the CoreData of the Iphone. So far so good: I have two elements of the xml file which I want to show in the tableview as the text and the detailtext. Now the strange behaviour occurs: If I take the data of the Core Data and trying to visualize them in the tableview, then both elements are displayed in seperate cells and not as detailtext of the element. If I am just taking a constant string for the detailtext, then it works, but if I am trying to take for every cell a specific element from the Core Data then it is shown seperately in the tableview. I googled a lot, reading here and there. I dont know which code I should show because I dont have a clue where exactly the mistake could be. Maybe someone can answer that immediately because it is a stupid mistake somewhere, which is common. Thanks for your help.

  Read the article

• How to prevent onclick statements from being executed?

  - by ryanli

  I want to use an event listener for preventing the onclick statement of a submit button, however, using event.preventDefault() doesn't work as intended. The code is like this: <?xml version="1.0" encoding="utf-8"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <script type="application/x-javascript"> function addListener() { document.getElementById("submit").addEventListener("click", function(ev) { alert("listener"); ev.preventDefault(); }, false); } </script> <title></title> </head> <body onload="addListener();"> <form id="form" method="post" target=""> <input type="submit" id="submit" onclick="alert('onclick')" value="test" /> </form> </body> </html> The expected behaviour is only "listener" will be alerted, but in practice (Firefox 3.7a5pre), "onclick" and "listener" are both alerted, in the given order. It seems that onclick is being executed before the listener, so event.preventDefault() doesn't work. Is there a way to prevent onclick from being executed?

  Read the article

• Why does a MFC application behaves mysteriously in encrypted hard drive environment.

  - by MauriceL

  I'm working on a bug where I have an MFC application that does weird things when installed in when Sophos Safeguard hard drive encryption is installed. I'm sorry to be so vague here, but I'm writing this away from the office so this is all from my (poor) memory. Three things I've noticed: AfxGetResourceHandle() doesn't return a consistent resource handle. There is a single case where we try to load a string resource, and for some reason, the resource handle that we get from this method is different to all the other stings. Can't construct a CDocumentTemplate. There is a trace error which I cant seem to recall. Will edit and post when I'm in tomorrow. This behaviour appears to manifest in a Visual Studio 2005 version of the project, but not a Visual Studio 2008 version. Unfortunately moving to the 2008 version is not an option. The bug is not always reproducable if I step through with a debugger. Also, bringing up debug message boxes changes the behaviuor, which leads me to think that either there is some kind of race condition going on with the way MFC events are being handled, but I'm not sure how I'll ever know for sure, or even what I can do about it if I did. I think there's some underlying reason that the app is behaving weirdly, but what I've posted are more symptoms. Can anyone think of what I should check for? I've run Windows update on the test environment to ensure everything was up to date, and I've examined the process in procmon to see if the disk encryption stuff was getting in the way and conflicting with files - it didn't appear to be, but it does appear to be involved in some way as our app accesses Sophos related paths in the temp directory.

  Read the article

• Python NameError when attempting to use a user-defined class

  - by Michael Herold

  I'm getting a weird instance of a NameError when attempting to use a class I wrote. In a directory, I have the following file structure: dir/ ReutersParser.py test.py reut-xxx.sgm Where my custom class is defined in ReutersParser.py and I have a test script defined in test.py. The ReutersParser looks something like this: from sgmllib import SGMLParser class ReutersParser(SGMLParser): def __init__(self, verbose=0): SGMLParser.__init__(self, verbose) ... rest of parser if __name__ == '__main__': f = open('reut2-short.sgm') s = f.read() p = ReutersParser() p.parse(s) It's a parser to deal with SGML files of Reuters articles. The test works perfectly. Anyway, I'm going to use it in test.py, which looks like this: from ReutersParser import ReutersParser def main(): parser = ReutersParser() if __name__ == '__main__': main() When it gets to that parser line, I'm getting this error: Traceback (most recent call last): File "D:\Projects\Reuters\test.py", line 34, in <module> main() File "D:\Projects\Reuters\test.py", line 19, in main parser = ReutersParser() File "D:\Projects\Reuters\ReutersParser.py", line 38, in __init__ SGMLParser.__init__(self, verbose) NameError: global name 'sgmllib' is not defined For some reason, when I try to use my ReutersParser in test.py, it throws an error that says it cannot find sgmllib, which is a built-in module. I'm at my wits' end trying to figure out why the import won't work. What's causing this NameError? I've tried importing sgmllib in my test.py and that works, so I don't understand why it can't find it when trying to run the constructor for my ReutersParser.

  Read the article

• printing out dictionnaires

  - by kyril

  I have a rather specific question: I want to print out characters at a specific place using the \033[ syntax. This is what the code below should do: (the dict cells has the same keys as coords but with either '*' or '-' as value.) coords = {'x'+str(x)+'y'+str(y) : (x,y) for x,y, in itertools.product(range(60), range(20))} for key, value in coords.items(): char = cells[key] x,y = value HORIZ=str(x) VERT=str(y) char = str(char) print('\033['+VERT+';'+HORIZ+'f'+char) However, I noticed that if I put this into a infinite while loop, it does not always prints the same characters at the same position. There are only slight changes, but it deletes some and puts them back in after some loops. I already tried it with lists, and there it seems to behave just fine, so I tend to think it has something todo with the dict, but I can not figure out what it could be. You can see the Problem in a console here: SharedConsole.I am happy for every tip on this matter. On a related topic: After the printing, some changes should be made at the values of the cells dict, but for reason unknown to me, the only the first two rules are executed and the rest is ignored. The rules should test how many neighbours (which is in population) are around the cell and apply the according rule. In my implemention of this I have some kind of weird tumor growth (which should not happen, as if there more than three around they should the cell should die) (see FreakingTumor): if cells_copy [coord] == '-': if population == 3: cells [coord] = '*' if cells_copy [coord] == '*': if population > 3: cells [coord] = '-' elif population <= 1: cells [coord] = '-' elif population == 2 or 3: cells [coord] = '*' I checked the population variable several times, so I am quite sure that is not the matter. I am sorry for the slow consoles. Thanks in advance! Kyril

  Read the article

• Picture.writeToStream() not writing out all bitmaps

  - by quickdraw mcgraw

  I'm using webview.capturePicture() to create a Picture object that contains all the drawing objects for a webpage. I can successfully render this Picture object to a bitmap using the canvas.drawPicture(picture, dst) with no problems. However when I use picture.writeToStream(fos) to serialize the picture object out to file, and then Picture.createFromStream(fis) to read the data back in and create a new picture object, the resultant bitmap when rendered as above is missing any larger images (anything over around 20KB! by observation). This occurs on all the Android OS platforms that I have tested 1.5, 1.6 and 2.1. Looking at the native code for Skia which is the underlying Android graphics library and the output file produced from the picture.writeToStream() I can see how the file format is constructed. I can see that some of the images in this Skia spool file are not being written out (the larger ones), the code that appears to be the problem is in skBitmap.cpp in the method void SkBitmap::flatten(SkFlattenableWriteBuffer& buffer) const; It writes out the bitmap fWidth, fHeight, fRowBytes, FConfig and isOpaque values but then just writes out SERIALIZE_PIXELTYPE_NONE (0). This means that the spool file does not contain any pixel information about the actual image and therefore cannot restore the picture object correctly. Effectively this renders the writeToStream and createFromStream() APIs useless as they do not reliably store and recreate the picture data. Has anybody else seen this behaviour and if so am I using the API incorrectly, can it be worked around, is there an explanation i.e. incomplete API / bug and if so are there any plans for a fix in a future release of Android? Thanks in advance.

  Read the article

• Bind an Incode DataTemplate in WPF

  - by Mike Bynum

  I have a WPF Application which is using MVVM. I know that there ways of doing this in XAML but I am working on a plugin architecture and came up with a solution where a plugin exposes it's viewmodel to my plugin host's viewmodel and it's datatemplate. I want to leave the lifetime management of the plugin view up to WPF. I have tried having the plugins expose a UserControl but ran into issues when WPF decided to dispose of my UserControl so I would not reattach it without weird hacky work arounds. I am having issues getting some sort of binding working to where i can bind a control to the data and it's template to my data template. I have a ViewModel which looks something like: public class MyViewModel { public DataTemplate SelectedTemplate{ get; set;} public object SelectedViewModel {get; set;} } The selected template and viewmodel are determined somewhere else in the code but are irrelevant to my question. My question is how i can bind to a DataTemplate so that I know how to display the data shown in the SelectedViewModel. The DataTemplate is a DataTemplate created incode which respresents: <DataTemplate DataType="{x:Type vm:MyViewModel}"> <v:MyUserControl /> </DataTemplate> I have tried: <UserControl Template="{Binding Path=SelectedTemplate}" Content="{Binding Path=SelectedViewModel"} /> But UserControl expects a control template and not a data template.

  Read the article

• HTML5: Rendering absolute images using canvas

  - by Mark

  I am experimenting with canvas as part of my HTML5 introduction. This constitutes as assignment work, but I am not asking for any help on the actual coursework at all. I am trying to write a rendering engine, but having no luck because once the image is drawn on canvas it looks very distorted, and not at the right dimensions of the image itself. I have made a animation engine that loads images into an array, and then iterates through them at a certain speed. This is not the problem, and I assume is not causing the issue as this was happening when I drawn an image to the canvas. I think this is natural behaviour for images to be scaled/skewed when the window is resized, so I conquered that by simply redrawing the whole thing once the window is resized. The images I am using are isometric, and drawn at a pixel level. Would this cause the distortion? It seems setting the dimensions on the drawImage() function are not working are all. I am using JavaScript for the manipulation and rendering of the canvas. I would normally try and work it out myself, but I do not have any time to ponder why because I have no idea why it is even scaling/skewing the image once it is drawn on the canvas. I cannot share the code for obvious reasons. I should also mention, the canvas's dimension is the total width of the viewport, as I am developing a game. My question is: Has anyone encountered this and how would I correct it? Thanks for your help.

  Read the article

• What are provenly scalable data persistence solutions for consumer profiles?

  - by Hubbard

  Consumer profiles with analytical scores [ConsumerID, 1..n demographical variables, 1...n analytical scores e.g. "likely to churn" "likely to buy an item 100$ in worth" etc.] have to be possible to query fast if they are to be used in customizing web-sites, consumer communications etc. Well. If you have: Large number of consumers Large profiles with a huge set of variables (as profiles describing human behaviour are likely to be..) ...you are in trouble. If you really have a physical relational database to which you target a query and then a physical disk starts to rotate someplace to give you an individual profile or a set of profiles, the profile user (a web site customizing a page, a recommendation engine making a recommendation..) has died of boredom before getting any observable results. There is the possibility of having the profiles in memory, which would of course increase the performance hugely. What are the most proven solutions for a fast-response, scalable consumer profile storage? Is there a shootout of these someplace?

  Read the article

• Double join with habtm in ActiveRecord

  - by Daniel Huckstep

  I have a weird situation involving the need of a double inner join. I have tried the query I need, I just don't know how to make rails do it. The Data Account (has_many :sites) Site (habtm :users, belongs_to :account) User (habtm :sites) Ignore that they are habtm or whatever, I can make them habtm or has_many :through. I want to be able to do @user.accounts or @account.users Then of course I should be able to do @user.accounts < @some_other_account And then have @user.sites include all the sites from @some_other_account. I've fiddled with habtm and has_many :through but can't get it to do what I want. Basically I need to end up with a query like this (copied from phpmyadmin. Tested and works): SELECT accounts.* FROM accounts INNER JOIN sites ON sites.account_id = accounts.id INNER JOIN user_sites ON sites.id = user_sites.site_id WHERE user_sites.user_id = 2 Can I do this? Is it even a good idea to have this double join? I am assuming it would work better if users had the association with accounts to begin with, and then worry about getting @user.sites instead, but it works better for many other things if it is kept the way it is (users <- sites).

  Read the article

• Hiding Url for asp.net page

  - by user204588

  Hello, I'm creating an html page that is posted to another page for processing. I don't want users to see the weird URL they are redirected to and I was using FRAMES but I can't figure out how to add my HTML page dynamically because I need the variables and either add frames or try another way to accomplish this. So, based on how I'm creating the page below, how can I hide the URL and add something that I want. Here is how I'm creating the page. StringBuilder sb = new StringBuilder(); sb.Append("<html><head></head>"); sb.Append("<body onload=\"document.frmLaunch.submit();\">"); sb.Append("<form name=\"frmLaunch\" action=\"" + variableTargetURL + "\" method=\"post\">"); sb.Append("<input type=hidden name=\"testVariable\" value=\"" + variableTest + "\">"); sb.Append("</form>"); sb.Append("</body></html>"); HttpResponse response = HttpContext.Current.Response; response.Clear(); response.Write(sb.ToString()); response.End();

  Read the article

• Do double forward slashes direct IE to use specific css?

  - by kjh

  I have just found something very weird while developing a website. While trying to get a div element to display across the top of the screen, I noticed that I wasn't achieving a desired result in any browser except for old versions of IE. In order to test some different code, instead of deleting the faulty line, I used '//' to comment it out (I'm not really even sure if that works in css) but what happened was, the compatible browsers used the uncommented code, while IE used the code marked by '//'. here is the code: #ban-menu-div{ position:fixed;top:0; //position:relative; //<-- IE keeps the banner with rel pos while the other display:block; // browsers used fixed margin:auto; padding:0px; width:100%; text-align:center; background:black; } so basically, it seems as though // can be used to instruct newer browsers to ignore specific lines of code, and instruct older versions of IE to use it? If this is common practice someone please let me know. it sure makes developing for older browsers a hell of a lot easier

  Read the article

• Printing Images C# Overlapping Wrong

  - by Alen

  I have created a program much like Photoshop in the sense that you can place images (picture box) on a control, move them around, delete them, and so on... I have also managed to put together a method to print all the images on the control with no problems. But here is the weird part: When I click print, the program prints the image which was placed first, on top of the image which came second. On the screen the user can see the image which was placed second, on top of the first placed image (the way it should be) but when I print its opposite? I have no idea why it does this... I hope I've made my self as clear as possible, any help is appreciated! public void printToGraphics(Graphics graphics, Rectangle bounds) { graphics.TextRenderingHint = System.Drawing.Text.TextRenderingHint.ClearTypeGridFit; graphics.CompositingQuality = System.Drawing.Drawing2D.CompositingQuality.HighQuality; graphics.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.HighQuality; Bitmap bitmap = new Bitmap(newLabel.Width, newLabel.Height); newLabel.DrawToBitmap(bitmap, newLabel.DisplayRectangle); Rectangle target = new Rectangle(0, 0, bounds.Width, bounds.Height); target.Height = bitmap.Height; target.Width = bitmap.Width; graphics.PageUnit = GraphicsUnit.Display; graphics.DrawImage(bitmap,target); } void printDoc_PrintPage(object sender, PrintPageEventArgs e) { printToGraphics(e.Graphics, e.MarginBounds); }

  Read the article

• Why is no encoding set in reponse by tomcat? How can I deal with it?

  - by Dishayloo

  I had recently a problem with encoding of websites generated by servlet, that occured if the servlets were deployed under tomcat, but not under jetty. I did a little bit of research about it and simplified the problem to the following servlet: public class TestServlet extends HttpServlet implements Servlet { @Override public void service(HttpServletRequest request, HttpServletResponse response) throws IOException { response.setContentType("text/plain"); Writer output = response.getWriter(); output.write("öäüÖÄÜß"); output.flush(); output.close(); } } If I deploy this under Jetty and direct the browser to it, it returns the expected result. The data is returned as ISO-8859-1 and if I take a look into the headers, then Jetty returns: Content-Type: text/plain; charset=iso-8859-1 The browser detects the encoding from this header. If I deploy the same servlet in a tomcat, the browser shows up strange characters. But Tomcat also returns the data as ISO-8859-1, the difference is, that no header tells about it. So the browser has to guess the encoding, and that goes wrong. My question is, is that behaviour of tomcat correct or a bug? And if it is correct, how can I avoid this problem? Sure, I can always add response.setCharacterEncoding("UTF-8"); to the servlet, but that means I set a fixed encoding, that the browser might or might not understand. The problem is more relevant, if no browser but another service accesses the servlet. So how I should deal with the problem in the most flexible way?

  Read the article

• LINQ - 'Could not translate expression' with previously used and proven query condition

  - by tomfumb

  I am fairly new to LINQ and can't get my head around some inconsistency in behaviour. Any knowledgeable input would be much appreciated. I see similar issues on SO and elsewhere but they don't seem to help. I have a very simple setup - a company table and an addresses table. Each company can have 0 or more addresses, and if 0 one must be specified as the main address. I'm trying to handle the cases where there are 0 addresses, using an outer join and altering the select statement accordingly. Please note I'm currently binding the output straight to a GridView so I would like to keep all processing within the query. The following DOES work IQueryable query = from comp in context.Companies join addr in context.Addresses on comp.CompanyID equals addr.CompanyID into outer // outer join companies to addresses table to include companies with no address from addr in outer.DefaultIfEmpty() where (addr.IsMain == null ? true : addr.IsMain) == true // if a company has no address ensure it is not ruled out by the IsMain condition - default to true if null select new { comp.CompanyID, comp.Name, AddressID = (addr.AddressID == null ? -1 : addr.AddressID), // use -1 to represent a company that has no addresses MainAddress = String.Format("{0}, {1}, {2} {3} ({4})", addr.Address1, addr.City, addr.Region, addr.PostalCode, addr.Country) }; but this displays an empty address in the GridView as ", , ()" So I updated the MainAddress field to be MainAddress = (addr.AddressID == null ? "" : String.Format("{0}, {1}, {2} {3} ({4})", addr.Address1, addr.City, addr.Region, addr.PostalCode, addr.Country)) and now I'm getting the Could not translate expression error and a bunch of spewey auto-generated code in the error which means very little to me. The condition I added to MainAddress is no different to the working condition on AddressID, so can anybody tell me what's going on here? Any help greatly appreciated.

  Read the article

• Firefox "intelligently" and silently fixes incorrect file references in CSS and Scripts at runtime.

  - by bobsoap

  Well this is a really weird issue, I really didn't find anything on this elsewhere so I thought I'd address it here. Say I have an "image.jpg" and accidentally reference it in the CSS like so: url(imag.jpg) Note the missing "e". Now for me, Firefox is so incredibly clever that it will still find the correct image, but NOT SPIT OUT A WARNING. So I assume that everything is ok. But later, when I test the page in any other browser, all of a sudden the image doesn't display (and rightly so). That's because Firefox thought it was a good idea to correct my error without telling me. This becomes more critical with scripts. Firefox will also auto-correct a typo in a reference. I just wasted a whole hour scratching my head and trying to debug an ajax function in Webkit - turns out, I just had a typo where I included the file. Why on earth does Firefox do this without telling, and where the heck can I turn this off? This has first occured somewhere around FF 3.0 and still persists in 3.6.3. /rant an thank fo any inpu ;)

  Read the article

• How to add "missing" columns in a column group in reporting services?

  - by Gimly

  Hello, I'm trying to create a report that displays for each months of the year the quantity of goods sold. I have a query that returns the list of goods sold for each month, it looks something like this : SELECT Seller.FirstName, Seller.LastName, SellingHistory.Month, SUM(SellingHistory.QuantitySold) FROM SellingHistory JOIN Seller on SellingHistory.SellerId = Seller.SellerId WHERE SellingHistory.Year = @Year GOUP BY Seller.FirstName, Seller.LastName, SellingHistory.Month What I want to do is display a report that has a column for each months + a total column that will display for each Seller the quantity sold in the selected month. Seller Name | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Total What I managed to do is using a matrix and a column group (group on Month) to display the columns for existing data, if I have data from January to March, it will display the 3 first columns and the total. What I would like to do is always display all the columns. I thought about making that by adding the missing months in the SQL request, but I find that a bit weird and I'm sure there must be some "cleanest" solution as this is something that must be quite frequent. Thanks. PS: I'm using SQL Server Express 2008

  Read the article

• No class def found error for JUnit Test on android

  - by J Bellamy

  I am having some very bizarre behaviour. I have a large number of test cases for my Android application, and they all work except for one. When I run this one I get a java.lang.NoClassDefFoundError: org.JUnit.test Yes, I have the JUnit 4 library imported into the project, and my other JUnit tests are running without any problems. What is particularly bizarre is that before I hit this problem I had an error in my code- basically, I tried writing a file to a read only folder. When that occurred, the JUnitTest would execute up to the point where it would hit an IO exception for accessing a part of memory it cannot access. I fix this problem, and suddenly the Android emulator doesn't seem to know what org.JUnit.test is. I have examined the run configuration for this test class, and it is the same as my others. It is in the same folder as the other tests as well. It also uses the same import statements. Any idea on what is going on? I am using the Android 10 emulator, and eclipse version 3.7.2. Edit: To clarify, the error I get appears on Logcat and not in my Eclipse project.

  Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >