Search Results

Search found 10789 results on 432 pages for 'cpu upgrade'.

Page 224/432 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

• packhard bell dot s netbook ubuntu 12.10

  - by Kermit

  sorry im absolutly linux beginner.... i bought a packhard bell netbook dots with Limpus.did not get along with limpus so wanted to install ubuntu. netbook: 2 GB RAM intel Atom N2600, intel graphics Media Accelerator 3600 I over installled ubuntu 12.10 (desktop version) like in the instruction (isofile over USB). Installation went fine. No problems. when starting after installation alot of text is coming.....starting xyz....with alot of okays at the end of line but nothing happends: ends with #Starting CPU interrups balancing daemon, stopping anachronics cron and blinking cursor... was reading in this forum, tried to do some things like #recoverymode# and nomodeset... but did not work or where do i get this graphic drivers from. Packard bell just offers windows drivers.and how do i install them? maybe its a completely diffrent cause for this? Thanks alot

  Read the article

• Graphic issue on intel945 chipset

  - by peeyush tiwari

  I used Intrepid(8.10) and my graphics used to work fine with compiz effects and all(on better resolution than 1024x768).Now I have upgraded to Precise(12.04)but I use gnome classic(with compiz effects)as my desktop but the compiz effects seem not to work, only unity 2D works. When I ran lshw -c video it gives: *-display UNCLAIMED description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fea40000-fea7ffff Sysinfo shows: Display Resolution 1024x768 pixels OpenGL Renderer Gallium 0.4 on llvmpipe(LLVM 0x300) X11 Vendor The X.Org Foundation On SystemSettings: Memory 993.3 MiB Processor Intel® Pentium(R) 4 CPU 2.40GHz Graphics VESA: Intel(r) 82945G Chipset Family Graphics OS type 32-bit glxgears output comes to be around 100fps which used to be around 900fps in Intrepid

  Read the article

• Ubuntu 12.10 Unity Dash transparency problem

  - by madox2

  I have just upgraded my Ubuntu 12.04 to 12.10 and there is following problem. When I press super button to show Unity Dash I get wrong background image behind the dash box. Especially I can see part of the bottom of the screen. Also when I set transparency to top panel the background behind is not correct. Here is an example with Mc Duck picture: Unity Mc Duck example Do you have any ideas whats wrong? My system preferences: Ubuntu 12.10 32-bit Intel® Pentium(R) CPU G840 @ 2.80GHz × 2 GeForce GTS 450/PCIe/SSE2 Any help will be highly appreciated!

  Read the article

• Upgrading your Internet connection to obselescence

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/10/11/upgrading-your-internet-connection-to-obselescence.aspxRecently I was approached by two UK Internet Service Providers to upgrade to a fibre connection. In each case I asked two questions:Can you provide me with a fixed IP Address?Is the equipment to be provided compatible with IPv6?None of the question was satisfactorily answered. One of the persons answering even suggested that granting a fixed IP Address would be a breach of security!I find it very disturbing that two companies that present themselves as innovative should still not be preparing for IPv6. The answer I would have expected was that all new equipment being supplied was IPv6 compatible and that plans were in hand for a switchover to IPv6. Instead new equipment would be supplied that would have to be replaced when IPv6 comes. Equally disturbing was that the call center people who answered did not know why a fixed IP address was important or why the change to IPv6 would have to come.I would rather not name and shame the two companies, however I will be looking elsewhere for my next Internet Service Provider.

  Read the article

• How come I can not install plugins on my local Wordpress install?

  - by classer

  Hello, I got WordPress up and running fine on Ubuntu 10.04 by using this source except that when I try to update and install themes/plugins I get this following error message in wp-admin page: Installing Plugin: WordPress.com Stats 1.8.1 Downloading install package from http://downloads.wordpress.org/plugin/stats.1.8.1.zip… Unpacking the package… Could not create directory. /var/www/wordpress/wp-content/upgrade/stats.tmp/stats Actions: Return to Plugin Installer At first I thought I had to setup an FTP account but searched more and I found some information that says that I need to change the permissions of the wp-content folder which is located in the directory: /var/www/wordpress/wp-content I tried changing it by doing: sudo chmod -R 777 wp-content/ but when I tried installing a plugin I got the same error message. I also tried passing it 755 as a permission but still got the same thing. I settled on 755 because it is more secure I have read. How can I solve this problem safely and securely?

  Read the article

• ubuntu 14 painfully slow on dell r200

  - by sirmonkey

  I didn't notice it at first. The machines (there is 20 plus) are to be used a simple file servers. It wasn't until samba just wouldn't act right that I installed a desktop gui and started more diagnoseing the problem did I catch the slow preformance... I've tested 4 servers they all suck. And windows 7 runs fantastic on them. I have Google and searched. But nothing to explain this. The easy test is dmesg is so slow you can almost read it. I'm guessing it's an apic or cpu power management issue. What output would you all like????? It is a core2 machine with 4Gb of ram. On board data.

  Read the article

• What's the difference between 'killall' and 'pkill'?

  - by jgbelacqua

  After using just plain kill <some_pid> on Unix systems for many years, I learned pkill from a younger Linux-savvy co-worker colleague1. I soon accepted the Linux-way, pgrep-ing and pkill-ing through many days and nights, through slow-downs and race conditions. This was all well and good. But now I see nothing but killall . How-to's seem to only mention killall, and I'm not sure if this is some kind of parallel development, or if killall is a successor to pkill, or something else. It seems to function as more targeted pkill, but I'm sure I'm missing something. Can an Ubuntu/Debian-savvy person explain when (or why) killall should be used, especially if it should be used in preference to pkill (when pkill often seems easier, because I can be sloppier with name matching, at least by default). 1 'colleague' is free upgrade from 'co-worker', so might as well.

  Read the article

• What You Said: Giving an Old Laptop a New Life

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your tips and tricks for breathing life into an old laptop, now we’re back to share your junk-bin sparing methods. Many of you worked to keep old laptops from getting scrapped by dusting them off and donating them. Mark writes: My acquaintances & friends give me their old computers when they buy a new one. So I disassemble, clean, install an opsys,and get internet working. I also upgrade memory, wireless, etc. from my parts bin. Then I give it to a poor person who needs a computer. Usually a single working mom with kids. I also do the same with old desktops as well. They really appreciate them and It gives me the satisfaction of resurrecting an old computer. Wbrown does the same: How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• pwmconfig: "There are no pwm-capable sensor modules installed"

  - by Sman789

  I'm trying to reduce my fan speed with fancontrol and pwmanager because, despite the temperatures being the same, they are much louder on Linux (Ubuntu Gnome 14.04) than on Windows. I've followed the instructions in the first answer here but when running pwmanager I get pwmconfig: "There are no pwm-capable sensor modules installed" I know that my system has working thermal sensors because PSensor has no trouble telling me my CPU temp and GPU temp. I would appreciate any help you can give in helping me reduce my fan speed to that of Windows (which uses the ASUS AI Suite 3 software which came with the Z87-A motherboard, if that's relevant).

  Read the article

• Question about Partitioning

  - by Trent C

  I am looking to dual boot Windows 7 and Ubuntu 13.10. I have been using windows for work and school for over a year, and have about 100 gig of stored files (backed up of course) and some paid programs. Because of this, I really want my partitioning experience to go well. Unfortunately, I am running into a bit of an anomoly When I load GPart, I see that my sda drive is unallocated http://i.imgur.com/Hi2XhIr.png Whereas my sdb appears to contain all of the windows files and partitions, and make up my C: drive http://i.imgur.com/aaCOXje.png Is this going to be an issue, as all literature on dual boot installation references sda? How do I work around it? System Info: Lenovo IdeaPad Y570- 750GB HDD with 64GB SSD Processor: Intel® Core™ i7-2670QM CPU @ 2.20GHz × 8

  Read the article

• Where do lucid-updates come from?

  - by timbooo

  Considering the following command: # apt-get --simulate --show-upgraded upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: libimobiledevice0 libpam-ck-connector libparted0debian1 Inst libimobiledevice0 [0.9.7-1ubuntu1] (0.9.7-1ubuntu1.2 Ubuntu:10.04/lucid-updates) Inst libpam-ck-connector [0.4.1-3ubuntu1] (0.4.1-3ubuntu2 Ubuntu:10.04/lucid-updates) Inst libparted0debian1 [2.2-5ubuntu5.1] (2.2-5ubuntu5.2 Ubuntu:10.04/lucid-updates) [...] I can read an Inst line as the following: Inst <package> [<oldversion>] (<newversion> Ubuntu:10.04/lucid-updates) Can someone tell me where the Ubuntu:10.04/lucid-updates comes from? - Considering an own repository, how is this configurable?

  Read the article

• AutoVue 20.0.x End of Oracle Premier Support

  - by GrahamOracle

  As per Oracle’s Lifetime Support policy, AutoVue version 20.0.x reached the end of Premier Support on March 1st 2012, and entered Sustaining Support. Customers are recommended to upgrade to the latest & greatest (AutoVue 20.2.0) at the earliest opportunity, to take advantage not only of a new 5-year Premier Support term, but also all of the fixes, new features, and new format support as compared to version 20.0.x.For more information on Oracle’s Lifetime Support policy, visit http://www.oracle.com/us/support/lifetime-support/lifetime-support-software-342730.html and click on the link titled “Lifetime Support Policy: Oracle Applications (PDF)”.

  Read the article

• KVM guest disk performance

  - by Alex

  My KVM guest does max. 200MB/s although the host does easily 700MB/s (Raid 0 with 4 SSDs). Configuration: File-based storage (raw), cache none. Host 24 cores, 96GB ram, Ubuntu 12.04.1 LTS and virt-manager. I suspect the CPU to be the bottleneck (one core goes up during hdparm). Anyone experienced the same or has an explanation ? Edit: one more info: guest is the same as host (Ubuntu 12). Same poor disk performance observed with Windows 2008 R2 and Suse Enterprise Linux (9 or 10 I think). Max 1 guest running.

  Read the article

• Change libcups to repository version

  - by Lerp

  I upgraded my libcups package to 1.6 in hopes to fix something but I just buggered things up more. So I want to reinstall it to the version on the repository (1.5.3 I think). I've tried to do a reinstall using ~#: apt-get install --reinstall libcups2 but that tells me it cannot be downloaded so refuses to upgrade. I can't just do: ~#: apt-get remove libcups2 ~#: apt-get install libcups2 as that wants to remove 299 packages along with it. Totaling 668MB so I am hesitant as that will probably take 6 hours to download on my connection.

  Read the article

• Performance triage

  - by Dave

  Folks often ask me how to approach a suspected performance issue. My personal strategy is informed by the fact that I work on concurrency issues. (When you have a hammer everything looks like a nail, but I'll try to keep this general). A good starting point is to ask yourself if the observed performance matches your expectations. Expectations might be derived from known system performance limits, prototypes, and other software or environments that are comparable to your particular system-under-test. Some simple comparisons and microbenchmarks can be useful at this stage. It's also useful to write some very simple programs to validate some of the reported or expected system limits. Can that disk controller really tolerate and sustain 500 reads per second? To reduce the number of confounding factors it's better to try to answer that question with a very simple targeted program. And finally, nothing beats having familiarity with the technologies that underlying your particular layer. On the topic of confounding factors, as our technology stacks become deeper and less transparent, we often find our own technology working against us in some unexpected way to choke performance rather than simply running into some fundamental system limit. A good example is the warm-up time needed by just-in-time compilers in Java Virtual Machines. I won't delve too far into that particular hole except to say that it's rare to find good benchmarks and methodology for java code. Another example is power management on x86. Power management is great, but it can take a while for the CPUs to throttle up from low(er) frequencies to full throttle. And while I love "turbo" mode, it makes benchmarking applications with multiple threads a chore as you have to remember to turn it off and then back on otherwise short single-threaded runs may look abnormally fast compared to runs with higher thread counts. In general for performance characterization I disable turbo mode and fix the power governor at "performance" state. Another source of complexity is the scheduler, which I've discussed in prior blog entries. Lets say I have a running application and I want to better understand its behavior and performance. We'll presume it's warmed up, is under load, and is an execution mode representative of what we think the norm would be. It should be in steady-state, if a steady-state mode even exists. On Solaris the very first thing I'll do is take a set of "pstack" samples. Pstack briefly stops the process and walks each of the stacks, reporting symbolic information (if available) for each frame. For Java, pstack has been augmented to understand java frames, and even report inlining. A few pstack samples can provide powerful insight into what's actually going on inside the program. You'll be able to see calling patterns, which threads are blocked on what system calls or synchronization constructs, memory allocation, etc. If your code is CPU-bound then you'll get a good sense where the cycles are being spent. (I should caution that normal C/C++ inlining can diffuse an otherwise "hot" method into other methods. This is a rare instance where pstack sampling might not immediately point to the key problem). At this point you'll need to reconcile what you're seeing with pstack and your mental model of what you think the program should be doing. They're often rather different. And generally if there's a key performance issue, you'll spot it with a moderate number of samples. I'll also use OS-level observability tools to lock for the existence of bottlenecks where threads contend for locks; other situations where threads are blocked; and the distribution of threads over the system. On Solaris some good tools are mpstat and too a lesser degree, vmstat. Try running "mpstat -a 5" in one window while the application program runs concurrently. One key measure is the voluntary context switch rate "vctx" or "csw" which reflects threads descheduling themselves. It's also good to look at the user; system; and idle CPU percentages. This can give a broad but useful understanding if your threads are mostly parked or mostly running. For instance if your program makes heavy use of malloc/free, then it might be the case you're contending on the central malloc lock in the default allocator. In that case you'd see malloc calling lock in the stack traces, observe a high csw/vctx rate as threads block for the malloc lock, and your "usr" time would be less than expected. Solaris dtrace is a wonderful and invaluable performance tool as well, but in a sense you have to frame and articulate a meaningful and specific question to get a useful answer, so I tend not to use it for first-order screening of problems. It's also most effective for OS and software-level performance issues as opposed to HW-level issues. For that reason I recommend mpstat & pstack as my the 1st step in performance triage. If some other OS-level issue is evident then it's good to switch to dtrace to drill more deeply into the problem. Only after I've ruled out OS-level issues do I switch to using hardware performance counters to look for architectural impediments.

  Read the article

• Speaker notification icon

  - by Dreams

  Hi, I hope somebody can help with a minor but rather annoying problem: There is a speaker icon on my desktop and I can't remove it. It has not been there before. I noticed it after I played around with XBMC 10 and a Youtube plugin. The icon shows all the time no matter what application I launch e.g. Firefox, XBMC etc. it just shows on top of the application that I launch. I tried to take a screendump, but the icon is not present in the screendump? I'm running Ubuntu 10.10 (upgrade from 10.04). Hope somebody cant help. Regards Dreams

  Read the article

• Sortie de la version 1.5 de JRuby avec une amélioration du support sous Windows

  Bonjour, La semaine dernière est sortie la version 1.5 de JRuby, version à laquelle ont contribué pas moins de 30 développeurs Open Source. Parmi les 4 core developpers, 3 font partie de la société Engine Yard. Les avancées principales pour cette version sont :Meilleure intégration avec les librairies Java (gestion mémoire et CPU plus efficace) Amélioration de la compatibilité avec Ruby (Ruby 1.8.7) Amélioration du support pour Windows (les nombreux problèmes qui rendait son utilisation sous Windows compliquée ont été traités) Pour les développeurs Java, il est également à noter de meilleures intégration avec Ant et Maven. Qui utilise régulièrement JRuby, et dans quel cadre ?

  Read the article

• Can you recommend a good tutorial on building custom package versions?

  - by Ivan

  After installing Ubuntu 11.04 I was disappointed by the fact there are still Scala 2.7 (when 2.8 is long ago current actual branch) and Mono 2.6 (when pretty a time has passed after 2.8 release). I am not sure I could build all the packages for Mono myself, but I'd like to try making my own custom version of Scala package (and I want my system to accept it not as a different package but a version of the original, so that if I put it into a configured repository, the system will automatically upgrade to it from currently installed original 2.7). Can you recommend a good tutorial on this subject (Ubuntu deb packages building and hacking for beginners)?

  Read the article

• Critical Patch Update for October 2012 Now Available

  - by Steven Chan (Oracle Development)

  The Critical Patch Update (CPU) for October 2012 was released on July 16, 2012. Oracle strongly recommends applying the patches as soon as possible. The Critical Patch Update Advisory is the starting point for relevant information. It includes a list of products affected, pointers to obtain the patches, a summary of the security vulnerabilities, and links to other important documents. Supported products that are not listed in the "Supported Products and Components Affected" Section of the advisory do not require new patches to be applied. Also, it is essential to review the Critical Patch Update supporting documentation referenced in the Advisory before applying patches, as this is where you can find important pertinent information. The Critical Patch Update Advisory is available at the following location: Oracle Technology Network The next four Critical Patch Update release dates are: January 15, 2013 April 16, 2013 July 16, 2013 October 15, 2013 E-Business Suite Releases 11i and 12 Reference Oracle E-Business Suite Releases 11i and 12 Critical Patch Update Knowledge Document (October 2012) (Note 1486535.1)

  Read the article

• Blank Processes (?) in Natty Narwhal

  - by A Hylian Human

  I've noticed that there a seemingly blank processes (no process name, no cmdline info, only an ID), which also appear to cause my CPU to be running like crazy. My fans are going pretty much full speed and I have no idea what to do. Restarting does not help. Whenever I try to kill the process IDs, nothing happens. It's like new blank processes are continuously being created. I am really surprised that I am able to write up this question without Firefox lagging like crazy (and trust me, it's not Firefox causing the issue, as far as I can tell).

  Read the article

• Get Trained in Sun ZFS Storage 7000 Appliance

  - by mseika

  Oracle University has scheduled the following OPN Only course: Course: Sun ZFS Storage 7000 Appliance Installation, Administration & Hands-On Lab Dates: 23-27 Jun 2014 11-15 Aug 2014 6-10 Oct 2014 Location: Reading You will learn how to successfully describe, install, configure, maintain, administer, troubleshoot and upgrade Sun ZFS Storage 7000 software and hardware. There is a hands-on lab which will take you through a NAS head software restore session, often referred to as a FISHSTICK restore. More details and online registration Remember: your OPN discount will be applied to the standard price shown on Oracle University web pages. For assistance in booking and more information, contact the Oracle University Service Desk: eMail: [email protected] Telephone: 01 189 249 066

  Read the article

• Struck with a serious issue when upgrading to ubuntu 13.10 from 13.04

  - by Piyush Deshmukh

  I installed ubuntu 13.04 alongside windows xp professional. When I tried to upgrade to 13.10 from 13.04, it took some time to download and then it started cleaning the files and then message was displayed that xp cleaned (this msg was seen by my younger brother and then he cut the power off) . Now the computer when starts displays this screen and I dont know how to proceed. To anyone giving solution I would like tell you that I prefer xp over linux(personal reasons). So is there any way to get out of this problem, neithet I can open xp nor linux?

  Read the article

• Downgrading from ubuntu 11.10 to 10.10, keeping installed programs

  - by Peter

  I recently upgraded from 10.10 to 11.04 then 11.10, and I'd like to revert back to 10.10. I understand that you cannot downgrade a version as easily as you can upgrade, and that I'll probably have to get the boot CD again and reinstall the whole thing. I know that I can keep most of my files by saving the /home directory, so 2 questions: Once I've gone back to 10.10, can I juts copy my old version of home over the freshly installed one? Is there a way to keep all of my installed programs, or some sort of way of getting the new install to automatically install them? Will I have to go through the tricky setups of things like TeX all over again? Thanks

  Read the article

• Recent Ubuntu update prevents MySQL root access

  - by Rhys

  I recently updated my Ubuntu (10.04 LTS) server (apt-get update, apt-get upgrade), and everything works fine, apart from the root access to my MySQL database. phpMyAdmin, CakePHP, and essentially all connections return similar access errors. For example, PMA returns 'Connection for controluser as defined in your configuration failed.' I have tried to find similar examples of this instance, but cannot find assistance in what configuration I should be changing to restore root log in access. The same issue has occurred on two servers. One has additional users so I could get around it, but the other is a new development server with only root MySQL access, so I am stuck on how to resolve this.

  Read the article

• I upgraded my ubuntu server from 13.04 to 13.10 Bugs I faced

  - by kirankumar kotari

  On upgrade from 13.04 to 13.10 my system is hanged. So after waiting for 30 min. I tried to restart. Some file are corrupted. I inserted my 13.04 disk and started in rescue mode. Finally My system started Then, I upgraded some apps again. Now my system upgraded to 13.10. Finally Done. But, Now the bugs raised. On my start key I got only my online services. No other applications, recently used, music, video icons are not showing. I am facing huge problem. I am unable to see my application what i installed. I checked in unity tweak tool all are fine. So, I ask any one to solve this issue.

  Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >