Search Results

Search found 21717 results on 869 pages for 'setup versions'.

Page 224/869 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

• Extracting one file from archive: 7-zip requires decompressing entire archive?

  - by siikamiika

  I've noticed that when browsing an archive containing multiple files with 7-zip 9.20 Windows GUI, extracting one file for previewing takes significantly longer with .7z than .rar archives. With .7zips it also cycles through the filenames in the archive. To me it looks like decompressing the entire archive and keeping just one file. Is there a setting in 7-zip (current or beta/alpha versions) that allows RAR-like behavior?

  Read the article

• 3 Servers, is this is a cluster?

  - by Andy Barlow

  Hello, At the moment I have one Ubuntu server, 9.10, running with a simple Samba share, a mail server, DNS server and DHCP server. Mostly its just there for file sharing and email server. I also have 2 other servers that are exactly the same hardware and spec as the first, which have an rsync set up to retrieve the shared folders and backs them up. However, if the first server goes down, all of our shares disappear along with our mail and the system must be rebuilt. Also I tend to find if people are downloading a large amount from the file server, no-one can access there emails - especially in the morning when everyone is signing in at once. Would it be more beneficial for me to have all 3 servers, all running the same services, doing the same thing with some sort of cluster with load balancing? I'm not really sure where to begin looking, or how to go about such a setup where 3 servers are all identical, but perhaps one acts as the main load balancer?? If someone can point me in the right direction, or if this simply sounds like one of those Enterprise Cloud's that is now a default setup in Ubuntu Server 9.10+, then I'll go down that route. Cheers in advance. Andy

  Read the article

• RDP 6.1.7600 Bug

  - by Jacob

  I've noticed a bug with RDP 6.1.7600. When I try to remote control another user on our Windows Server 2003 machine, I get an error that says "because of a protocol error, this session will be disconnected" and my RDP session is logged out. The error only happens when I try to control a Neoware Thin Clients. Is it because the RDP protocol versions are different?

  Read the article

• Public static ip for vagrant box

  - by Numbata

  I have server (Debian Squeeze) with 1 ethernet card and 2 public static IPs (188.120.245.4 and 188.120.244.5). What I want: Setup virtual box (Ubuntu) with access via static IP (188.120.244.5). What I was trying: config.vm.forward_port - good idea: setup interface "eth1:1" with 188.120.244.5 on host-machine, and add to Vagrant file "config.vm.forward_port = hmm..?" config.vm.network :hostonly, "188.120.244.5" - not working. Was created new interface on host-machine with ip "188.120.244.1". Of course 188.120.244.1 IP isn't mine and I can't access my server via this IP. config.vm.network :bridged - I'm confused how this works :) What I have now: Not working configuration. Debian-host-machine# cat Vagrantfile Vagrant::Config.run do |config| config.vm.define :gitlab do |box_config| box_config.vm.box = "ubuntu" box_config.vm.host_name = "ubuntu" box_config.vm.network :bridged box_config.vm.network :hostonly, "188.120.244.5", :auto_config => false end end Debian-host-machine# ifconfig eth1 Link encap:Ethernet HWaddr 00:15:17:69:71:bb inet addr:188.120.245.4 Bcast:188.120.247.255 Mask:255.255.248.0 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:188.120.244.1 Bcast:188.120.246.255 Mask:255.255.255.0 Ubuntu-virtual-machine# ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:ee:8d:0c inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 eth1 Link encap:Ethernet HWaddr 08:00:27:45:71:87 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 How I can access virtual box via public static IP from network? I'm using Oracle VM VirtualBox Manager 4.1.18 and Vagrant version 1.0.3. Thanks in advance for your feedback.

  Read the article

• Apache2 Manage Server default

  - by Jaime E. Valdez

  I'm trying to setup two domains correctly. I have some issues I hope you can help me. Site one's conf: <VirtualHost myipaddress:80> ServerName www.domain1.com ServerAdmin [email protected] DocumentRoot /home/domain1/public_html </VirtualHost> My other domain conf is: <VirtualHost myipaddress:80> ServerName www.domain2.com ServerAlias *.domain2.com domain2.com ServerAdmin [email protected] DocumentRoot /home/domain2/public_html </VirtualHost> The default site is disabled. The problem is that when accessing "domain2.com" from my browser, it always redirects to "www.domain1.com". It only works when I excplicitly access "www.domain2.com". I have also other domains like "domain1.net", "domain1.info" pointing to my server but at this moment are not configured either setup on Apache yet I can access from browser and always accessing to "www.domain1.com". By the way is there any possible configuration over Apache to handle IP only, I mean if I type "http://myipaddress/" I get the "www.domain1.com"... Arrgh.

  Read the article

• Ruby Passeger + Nginx or lighthttpi + fgci for shared hosting

  - by devnull

  I have set up a passenger + nginx setup and I plan to offer a free non-commercial hosting (or in fact on the fly deployment) for rack-based frameworks (e.g. camping, sinatra). I am facing an "issue" with passenger. For each application you need to configure nginx.conf (it would be the same with apache so it is not an nginx issue) with: server { ... passenger_base_uri /app1; passenger_base_uri /app2; passenger_base_uri /app3; } Now this is not inherently bad as, in theory, I could allow a user to run just one app on his webspace but even in this case I need to create a new server directory on nginx e.g. (user.domain.com). As this will mainly be used to deploy apps the behavior I am looking at is more the possibility to auto map several apps (e.g. app1, app2, app3, app4) under the same server (your app.com/app1 yourapp.com/app2) without having to update the nginx or apache file each time. This seems to be a limitation in passenger. As such I am thinking about an alternative with lighttpd and fastcgi. Would this allow immediate deployment without touching the lighttpd config file e.g. I create a new directory with app2 and it will run immediately ? What is your experience in performance difference between passenger + nginx vs. lighttpd + fastcgi ? thanks in advance scenario details: on nginx + passenger - user cannot add a new sub-folder and run another sinatra/camping app without declaring the path on nginx.conf and restarting the server; wished behavior with the new setup: - user can add a new folder with a new app and it would run on lighttpd+fcgi without any extra configuration of the web server;

  Read the article

• iis 7.5 - WFF and ARR farm management

  - by smackaysmith

  We have two test web farms (IIS 7.5). The Florida web farm has two ARR servers and two content servers. The ARR servers have WFF and NLB installed. The ARR setup uses a shared config located on a file share. The content servers do not have WFF installed. There is one web farm, and it's managed on an ARR server. The Illinois web farm also has two ARR servers and two content servers. ARR servers have WFF and NLB installed, and they use a shared config located on a share. One of the content servers has WFF installed, which makes it the controller; it's also the primary content server. Apparently, Illinois isn't properly configured. From what we've pieced together from various IIS.net articles and this post (http://ruslany.net/2010/07/web-farm-framework-2-0-overview/), the controller should be one of the ARR servers (like our Florida setup). The thing is Florida's controller doesn't have a Primary server nor can you set one of the content servers as Primary. It doesn't have the management piece showing the Trace messages when you click the Servers node (from iis console, Server Farms/FLFarm/Servers http://ruslany.net/wp-content/uploads/2010/07/WebFarm8.png). That management piece does exist in the Illinois farm, but that's a bad configuration. What are we missing that our Florida configuration doesn't have the Primary and Secondary content servers, and the management piece? I have looked for IIS role differences, but there are none.

  Read the article

• Remove DRM from *.pdb e-book that I own - while maintaining footnotes, etc.?

  - by ziesemer

  Background: I've already reviewed Remove DRM from ePub Files? and How can I remove DRM from Kindle books? - the answers to which have already brought me partial process. The challenge is that I have a few purchased *.pdb e-books that I purchased in years past, e.g. 2006. In particular, they were purchased from the palm eBook Store (ebooks.palm.com - now defunct, possibly part of http://www.ereader.com / Barnes & Noble?) - originally for use on a Palm Treo that has since died. Of particular note is that I have a revision / publication of a book that is no longer published, and not available as an e-book from anywhere else that I've been able to find. (I feel fortunate to have even found the *.pdb files on backup.) I have a copy of the electronic invoice for it - which includes the details necessary for unlocking - the "Purchaser's Name" and the "Unlock Code" - which is the digits of my credit card # that I had used to purchase it. Given the above information, I was surprised to be able to open the book using the Windows eReader software and unlock it. Here I am able to view the complete contents and functionality of the book as I had done on the Palm Treo - including viewing of linked annotations / footnotes, etc. Following the full spirit of Remove DRM from ePub Files?, I want to ensure that I can access this on any device of my choosing - especially now and in the future, and as new technologies arrive and disappear. Ideally, I'm just looking to accomplish the minimum necessary to allow import into calibre. Outstanding Issue: I've found a few solutions that have given me "90%" success - all based on various versions of some Python scripts - including versions 0.21 and 0.11 of "erdr2pml.py" (based on "ereader2html"). Unfortunately, unless I'm missing something, these programs are attempting to also "convert" - instead of just "decrypting". As such, the outputs are missing embedded images and/or footnotes. I.E., there is a linked, underlined, and super-scripted "a" after some text - but the content of the footnote no longer exists. I can validate this by inspecting the generated *.pmlz file, and nowhere does it contain the original footnotes that are still visible in the original *.pdb file. I'm hoping to find a process that focuses on the decryption only, instead of attempting any type of a content conversion - or if a content conversion is required / involved, that it maintains all of the features and content of the original. (Again, I'm confident that if/once a version is obtained that calibre can import, I'll be able to fulfill the rest of my requirements.)

  Read the article

• Apahe configuration with virtual hosts and SSL on a local network

  - by Petah

  I'm trying to setup my local Apache configuration like so: http://localhost/ should serve ~/ http://development.somedomain.co.nz/ should serve ~/sites/development.somedomain.co.nz/ https://development.assldomain.co.nz/ should serve ~/sites/development.assldomain.co.nz/ I only want to allow connections from our local network (192.168.1.* range) and myself (127.0.0.1). I have setup my hosts file with: 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 development.somedomain.co.nz 127.0.0.1 development.assldomain.co.nz 127.0.0.1 development.anunuseddomain.co.nz My Apache configuration looks like: Listen 80 NameVirtualHost *:80 <VirtualHost development.somedomain.co.nz:80> ServerName development.somedomain.co.nz DocumentRoot "~/sites/development.somedomain.co.nz" DirectoryIndex index.php <Directory ~/sites/development.somedomain.co.nz> Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost localhost:80> DocumentRoot "~/" ServerName localhost <Directory "~/"> Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <IfModule mod_ssl.c> Listen *:443 NameVirtualHost *:443 AcceptMutex flock <VirtualHost development.assldomain.co.nz:443> ServerName development.assldomain.co.nz DocumentRoot "~/sites/development.assldomain.co.nz" DirectoryIndex index.php SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile /Applications/XAMPP/etc/ssl.crt/server.crt SSLCertificateKeyFile /Applications/XAMPP/etc/ssl.key/server.key BrowserMatch ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 <Directory ~/sites/development.assldomain.co.nz> SSLRequireSSL Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> </IfModule> http://development.somedomain.co.nz/ http://localhost/ and https://development.assldomain.co.nz/ work fine. The problem is when I request http://development.anunuseddomain.co.nz/ or http://development.assldomain.co.nz/ it responds with the same as http://development.somedomain.co.nz/ I want it to deny all requests that do not match a virtual host server name and all requests to a https host that are requested with http PS I'm running XAMPP on Mac OS X 10.5.8

  Read the article

• What do I need to do to set my computer as Default Gateway?

  - by Vaibhav

  We are trying to put together a box with dual LAN cards (let's say Outer and Inner), where the Inner LAN card is supposed to act as a default gateway on the network it is connected to. This box is running Ubuntu. The basic purpose for this box is to take messages generated on the inner network, do some work with them and forward them out the Outer LAN card to a server. The inner network is completely isolated with simply a regular switch connecting the Inner LAN Card with two other boxes. These other boxes either throw out multi-cast messages (which the Inner LAN Card is listening to), or send out unicast messages meant for the server which is not on this inner network. So, we need the Inner LAN Card to act as a default gateway, where these unicast messages will then be sent, and the code on the dual-LAN Card box can then intercept and forward these messages to the server. Question: 1. How do we setup the LAN Card to be default gateway (does it need some configuration on Ubuntu)? 2. Once we have this setup, is it a simple matter of listening to the interface to intercept the incoming messages? Any help (pointers in the right direction) is appreciated. Thanks.

  Read the article

• LYNC / OCS... problems getting edge server working.

  - by TomTom

  New setup Lync 2010 (i.e. OCS 2010). I have serious problems getting my edge system going. Internally things work fine. Externally I am stuck. I have used the tester at https://www.testocsconnectivity.com/ and it also fails. NOTE: I use the domain xample.com / xample.local here just as example. Here is the setup. I have 2 internal hosts (lync.xample.local, edge.xample.local). edge.xample.com is also correctly in dns. and points to the edge.xample.local external assigned ip address (external interface). Externally, I have the following dns entries: edge.xample.com _sip._tcp - edge.xample.com 443 _sipfederationtls._tcp - edge.xample.com 5061 _sipinternaltls._tcp - lync.xample.local 5061 _sip._tls - edge.xample.com 443 My problem is that the ocs connection test always ends up trying to contact lync.xample.local (i.e. the internal address) when connecting to [email protected]. The error is: Attempting to Resolve the host name lync.xample.local in DNS. This shows me it clearly manages to connect to SOMETHING, but it does either fall through to the _sipinternaltls._tcp entry, OR it does get that internal entry wrongly from the edge system. Am I missing some entries or have some wrong?

  Read the article

• ESX 4.0 space: DASD, NAS, or ?

  - by thormj

  I put together an ESX box for better management, but its performance is a WTF item; I'm a noob at dealing with ESX, so I'm looking for a laundry-list of reading material to help me straighten this out so I can go back to .NET programming. Current storage system: We're running Raid5+Hotspare (8x500 GB spindles) on a PERC6i on a Dell 2910. Due to ESX limitatios, the PERC is showing the storage as 1x2TB + 1x800GB "partitions." I'm not sure of the setup's configuration (stride / stripe / ???) at all. Our Applications We have a SBS server as well as a minor (2x50 GB, but growing at 10GB/month) database server... Our application that lives on the database VM is CPU and I/O insense; it's a database churning excercise mixed in with a lot of computation on the data (fixing that performance is what I'm supposed to be working on)... Perfomance Issue When I do a backup, restore, or worse (copy a backup from 1 vm to another to move it to the QA VM), the entire system slows to a crawl (even "unrelated" VMs). I originally thought a DASD situation would be quite good since you had PCI-x bandwidth, but the systemwide slowdown is killing productivity. Questions What should I do to make an intelligent decision about NAS vs RAID vs SAN vs DASD? Are there sweet spots/ugly spots in the storage setup? Can you use a SSD PCI-X card in ESX for the tempdb? Good/Bad idea? Is there any way to "share" some image in a copy-on-write fashion? Most of the "Backup-Copy-Restore" is to "put a clean image on the dev boxes"; if I could have them "share" the master image, the "big copy" (2x50 GB) would only need to be done once per week instead of once per dev per week...[runtime performance isn't a concern with the dev boxes, but the backup/copy/restore kills production, SBS, and everything else on the box]

  Read the article

• Asterisk terminating outbound call when picked up, sends 'BYE' message

  - by vo

  I'm running Asterisk 1.6.1.10 / FreePBX 2.5.2.2 and I've got an outbound trunk setup. Everything use to work fine until recently (perhaps due to upgrade to FC12 or other things I'm not sure). Anyway the setup does not appear to have issues registering and setting up the call, RTP packets go both ways and you can hear the ringing from the other side. However it appears that when the call is picked up or thereabouts, the incoming RTP packets cease. Upon closer inspection with Wireshark, there are these particular packets that seem to be the cause: trunk->asterisk SIP/SD Status: 200 OK, with session description asterisk->trunk SIP Request: ACK sip:<phone>@trunk:6889 asterisk->trunk SIP Request: BYE sip:<phone>@trunk:6889 [..about a dozzen RTP packets in/outbound..] trunk->asterisk SIP Status: 200 OK, CSeq: 104 Bye [..outbound RTP continues, phone is silent..] Then the inbound RTP packets cease, however the asterisk logs dont show any activity at this point. The last entry reads 'SIP/ is answered SIP/'. Then when you hangup the extension, you get asterisk->trunk SIP Request: BYE sip:<phone>@trunk:6889 trunk->asterisk SIP Status: 481 Call Leg/Transaction does not exist My trunk peer settings in FreePBX are: username=<user> fromuser=<user> canreinvite=no type=friend secret=<pass> qualify=no [qualify yes produces 401/forbidden messages] nat=yes insecure=very host=<sip trunk gateway> fromdomain=<sip trunk gateway> disallow=all context=from-pstn allow=ulaw dtmfmode=inband Under sip_general_custom.conf i have stunaddr=stun.xten.com externrefresh=120 localnet=192.168.1.1/255.255.255.0 nat=yes Whats causing Asterisk to prematurely end the call and still think the call is in progress? I have no idea where to look next.

  Read the article

• Can I upgrade Vista Systembuilder editions to Windows 7 ?

  - by bitbonk

  Can I upgrade my Systembuilder versions of Windows Vista Home Premium and Ultimate to Windows 7? If so, how much will it cost?

  Read the article

• Map FTP folder to folder on different FTP server

  - by jolt

  In my team we work a lot with FTP. We upload and download files from several different servers daily. Currently every member of the team manages access credentials to each FTP server locally on their own machine. I am looking for a way to set up a central FTP server that we can connect to, and from there, navigate to folders that each represent one of the other FTP servers that we connect to daily. Something like this: In-house central FTP server: |- FolderA --> server A root folder |- FolderB --> server B root folder |- FolderC --> server C root folder A setup like this, would mean that we can manage access credentials on the central FTP server, and team members would only need to have the access credentials to the central FTP server, and from there they could navigate to the other servers through these "virtual" folders. We could potentially develop our own custom FTP server that just forward requests to the remote FTP servers, but i feel like something like this (or something similar) would already have been done. So I'm looking for pointers that could help us find software for Windows that could help us to simplify our current setup. Thank you! Similar (unanswered) question here: FTP management server

  Read the article

• Squid SSL transparent proxy - SSL_connect:error in SSLv2/v3 read server hello A

  - by larryzhao

  I am trying to setup a SSL proxy for one of my internal servers to visit https://www.googleapis.com using Squid, to make my Rails application on that server to reach googleapis.com via the proxy. I am new to this, so my approach is to setup a SSL transparent proxy with Squid. I build Squid 3.3 on Ubuntu 12.04, generated a pair of ssl key and crt, and configure squid like this: http_port 443 transparent cert=/home/larry/ssl/server.csr key=/home/larry/ssl/server.key And leaves almost all other configurations default. The authorization of the dir that holds key/crt is drwxrwxr-x 2 proxy proxy 4096 Oct 17 15:45 ssl Back on my dev laptop, I put <proxy-server-ip> www.googleapis.com in my /etc/hosts to make the call goes to my proxy server. But when I try it in my rails application, I got: SSL_connect returned=1 errno=0 state=SSLv2/v3 read server hello A: unknown protocol And I also tried with openssl in cli: openssl s_client -state -nbio -connect www.googleapis.com:443 2>&1 | grep "^SSL" SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A SSL_connect:error in SSLv2/v3 read server hello A SSL_connect:error in SSLv2/v3 read server hello A Where did I do wrong?

  Read the article

• Run Crontab anytime after 4pm

  - by EasilyBaffled

  I am trying to run a script through crontab in osx 10.8.5 that will run at 4:30. 30 16 * * 1-5 /Library/Frameworks/Python.framework/Versions/2.7/bin/python /Users/lego90511/PycharmProjects/Stock\ Scanner/stock_scanner.py But I realized today that, my computer is not always on at 4:30. So I added the fix * 16 * * 1-5. But then I realized it may not be at all between 4-5. How can I set crontab to run anytime after 4pm(16 cron time)?

  Read the article

• 550 Requested action not taken: mailbox unavailable

  - by Porch

  I setup a small box with Server 2003 64bit to be used as a webserver and email server for a small school. Real simple stuff for a few users. A simple website and a handful of emails. rDNS and spf records setup and pass every test I found including test at dnsstuff.com. Email sending to almost every email address (google, hotmail, aol, whatever) works. However, with one domain, I get an bounce back with the error. 550 Requested action not taken: mailbox unavailable It's another school running Exchange judging from some packet sniffing with WireShark. Every email on this domain I have tried sending to gives this error. The email address is valid as I can send to it from my personal, and gmail account without a problem. Does anyone know of some anti-spam software that gives an 550 error like the above? What else could this be? Thanks for any suggestions. Packet capture of the two servers communicating look like this. 220 <server snip> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at Sat, 2 Oct 2010 12:48:17 -0700 EHLO <email snip> 250-<server snip> Hello [<ip snip>] 250-TURN 250-SIZE 250-ETRN 250-XXXXXXXXXX 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-XXXXXXXX 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XXXXXXX 250 OK MAIL FROM: <email snip> 250 2.1.0 <email snip>....Sender OK RCPT TO:<email snip> 250 2.1.5 <email snip> DATA 354 Start mail input; end with <CRLF>.<CRLF> <email body here> . 550 Requested action not taken: mailbox unavailable QUIT 221 Goodbye

  Read the article

• Losing JSESSIONID when using ProxyHTMLURLMap

  - by Matthew Schmitt

  I've setup a reverse proxy between an Apache front-end and multiple Tomcat backends. The below block of code includes the ProxyHTMLURLMap param so that the HTML can be rewritten to remove the Tomcat context path. With this setup in place, after logging into my application, an initial JSESSIONID is set properly, but when navigating to any other page, this JSESSIONID is lost and another one is set by the application. I should mention that the initial login directs to a URL that includes the current context path (i.e. https://app.domain.com/context/home), but when navigating to another page, that context path is not present in the URL (i.e. https://app.domain.com/page2). <Proxy balancer://happcluster> BalancerMember ajp://happ01.h.s.com:8009 route=worker1 loadfactor=10 timeout=15 retry=5 BalancerMember ajp://happ02.h.s.com:8009 route=worker2 loadfactor=10 timeout=15 retry=5 BalancerMember ajp://happ03.h.s.com:8009 route=worker3 loadfactor=5 timeout=15 retry=5 BalancerMember ajp://happ04.h.s.com:8009 route=worker4 loadfactor=5 timeout=15 retry=5 BalancerMember ajp://happ05.h.s.com:8009 route=worker5 loadfactor=5 timeout=15 retry=5 ProxySet lbmethod=bytraffic ProxySet stickysession=JSESSIONID </Proxy> ProxyPass /context balancer://happcluster/context ProxyPass / balancer://happcluster/context/ <Location /context/> # Rewrite HTTP headers and HTML/CSS links for everything else ProxyPassReverse / ProxyPassReverseCookieDomain / app.domain.com ProxyPassReverseCookiePath / /context ProxyHTMLURLMap /context/ / # Be prepared to rewrite the HTML/CSS files as they come back # from Tomcat SetOutputFilter INFLATE;proxy-html;DEFLATE </Location> Has anyone ever run into a similar situation?

  Read the article

• Silent install FirePro v4900 Driver on Windows Embedded 7 Standard

  - by Birgit_B

  I'm trying to install the Drivers for a FirePro v4900 on a Windows Embedded 7 Standard 64bit OS. I want the system to be as small as possible, so i would rather not install the whole catalyst control center, but only the necessary drivers. Because the installation should be accomplished absolutely unattended, the installation process of the FirePro-Driver should also be done without any user interaction. I see two possible solutions for the Problem: Install only the Drivers: Is it possible to solely install the necessary drivers? How would i achieve that? This solution would be the preferred one, because of the smaller footprint. Silent custom install the provided "FirePro_8.911.3.3_VistaWin7_X32X64_135673.exe" (found at ATI FirePro™ Driver). Is there a way, to do that? Thank you in advance for your support! Update: I managed to accomplish a silent installation. I extracted the contents of the above mention installer-file and ran \$_OUTDIR\Bin64\Setup.exe -Install. (There are some other Parameters, just run Setup.exe /?). But i couldn't achieve to just install the drivers without the Cataclyst Control Center, and it seams the Control Center has some unfulfilled dependencies and so it crashes...

  Read the article

• On an HTC Hero - with provider Orange in the UK - can one upgrade the OS?

  - by user32648

  Currently it's running Android 1.5 - I'd clearly prefer to be on 1.6, 2.0 or 2.1 - but there seems to be limited information on this available on the internet. If anyone can confirm whether it's been done before, what versions are compatible with the handset, and any problems, it'd be really useful. Aside - it's kind of poor that a phone sold in March 2010 only runs Android 1.5... :(

  Read the article

• Open Source Chef Server can't upload cookbook

  - by veilig

  I just setup the open source chef server on an Ubuntu 12.04 EC2 instance, I've setup my webui and am able to get responses from my knife commands ie: knife node list, knife client list, knife user list, etc... I'm able to update roles, databags, environments, etc... but I cannot upload any cookbooks. I'm running my workstation on Mac OSX. I keep getting this output at the end of my command knife cookbook upload -VV curl. Doesn't matter what cookbook I upload, or if I upload them all - I keep getting the same response DEBUG: Chef::HTTP calling Chef::HTTP::ValidateContentLength#handle_response DEBUG: Chef::HTTP calling Chef::HTTP::RemoteRequestID#handle_response DEBUG: Chef::HTTP calling Chef::HTTP::Authenticator#handle_response DEBUG: Chef::HTTP calling Chef::HTTP::Decompressor#handle_response DEBUG: Chef::HTTP calling Chef::HTTP::CookieManager#handle_response DEBUG: Chef::HTTP calling Chef::HTTP::JSONToModelOutput#handle_response /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http/json_output.rb:51:in `handle_response': undefined method `chomp' for nil:NilClass (NoMethodError) from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:229:in `block in apply_response_middleware' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:227:in `each' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:227:in `inject' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:227:in `apply_response_middleware' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:144:in `request' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:118:in `put' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/cookbook_uploader.rb:123:in `block in uploader_function_for' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/util/threaded_job_queue.rb:52:in `call' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/util/threaded_job_queue.rb:52:in `block (3 levels) in process' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/util/threaded_job_queue.rb:50:in `loop' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/util/threaded_job_queue.rb:50:in `block (2 levels) in process'INFO: HTTP Request Returned 204 No Content:

  Read the article

• BackupPC - why does it use rsync --sender --server ... ?

  - by Jakobud

  I'm in the process of experimenting with BackupPC on a CentOS 5.5 server. I have everything pretty much setup with default values. I tried setting up a basic backup for a host's /www directory. The backup fails with the following errors: full backup started for directory /www Running: /usr/bin/ssh -q -x -l root target /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Xfer PIDs are now 30395 Read EOF: Connection reset by peer Tried again: got 0 bytes Done: 0 files, 0 bytes Got fatal error during xfer (Unable to read 4 bytes) Backup aborted (Unable to read 4 bytes) Not saving this as a partial backup since it has fewer files than the prior one (got 0 and 0 files versus 0) First of all, yes I have my ssh keys setup to allow me to ssh to the target server without requiring a password. In the process of troubleshooting, I tried the above ssh command directly from the command line, and it hangs. Looking at the end of the debug messages for SSH I get: debug1: Sending subsystem: /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Request for subsystem '/usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/' failed on channel 0 Next I started looking at the rsync flags. I did not recognize --server and --sender. Looking at the rsync man pages, sure enough, I don't see anything about --server or --sender in there. What are those in there for? Looking at the BackupPC config I have this: RsyncClientPath = /usr/bin/rsync RsyncClientCmd = $sshPath -q -x -l root $host $rsyncPath $argList+ And for the arguments, I have the following listed: --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive Notice there is no --server, --sender or --ignore-times. Why are these things getting added in? Is this part of the problem?

  Read the article

• procmail don't execute php script

  - by Phliplip

  Hi, I have setup a kannel SMS gateway on my FreeBSD 7.2 - the service works great. I'm now trying to setup a email2sms feature. For this i have created a system user called kannel and all mails are forwarded to this user. In the home dir of kannel i have the following files. -rw-r--r-- 1 kannel kannel 81B 17 jan 09:50 .procmailrc lrwxr-x--- 1 root kannel 58B 14 jan 13:24 email2sms.php @ -> some-what-some-where -rw-rw-rw- 1 root kannel 5,8K 17 jan 09:52 log.email2sms -rw------- 1 kannel kannel 1,3K 17 jan 09:50 procmail.log -rw-r----- 1 root kannel 606B 14 jan 13:28 rawmail.txt The file email2sms.php is a symlink to the a php script (ZendFramework Application) that takes the email from STDIN, and uses ZendFramework to parse that mail into an object. It then do a http request to the SMS gateway. The php-script works. Content of .procmailrc LOGFILE=$HOME/procmail.log VERBOSE=yes :0 | php email2sms.php >> log.email2sms From last sent email i have this in procmail.log procmail: [97744] Mon Jan 17 09:50:40 2011 procmail: [97744] Mon Jan 17 09:50:40 2011 procmail: Assigning "LASTFOLDER= php email2sms.php >> log.email2sms" procmail: Executing " php email2sms.php >> log.email2sms" procmail: Notified comsat: "kannel@:/home/user/kannel/ php email2sms.php >> log.email2sms" From [email protected] Mon Jan 17 09:50:40 2011 Subject: asdf as Folder: php email2sms.php >> log.email2sms 2600 But there is no new output to log.email2sms, and the script should output the subject of the email. If i sudo as the kannel user and pipe a file with raw email to the script, it executes just fine. [root@webserver /home/user/kannel]# /home/user/kannel/ sudo -u kannel cat rawmail.txt | php email2sms.php >> log.email2sms And the command outputs to log.email2sms as desired. Any ideas guys?

  Read the article

• What PHP, Xdebug and Eclipse configurations work on Windows 7 64 bit?

  - by thaddeusmt

  I have been mucking around for days, trying to find the right combination that lets me debug with breakpoints and variable viewing, in Eclipse, without crashing Apache. PHP 5.3? PHP 5.2? Eclipse Helios? Eclipse Galileo? One or the other with certain versions of xdebug or php? Or do I really need to use NetBeans or something else? Is my 64 bit OS the problem? Do need specific 64bit versions of PHP, Eclipse or Xdebug to work on Windows 7 64? Any special xdebug config options and tricks that I need in php.ini? Like turning off xdebug.profiler_enable or not using quotes around my zend_extension path to the xdebug dll? A Vhosts issue? Scrap the whole thing and go back to Win XP or Ubuntu? Here's what I've already been reading: http://stackoverflow.com/questions/4509245/so-eclipse-and-xdebug-walk-into-a-bar-and-then-my-apache-server-dies/4602473 http://stackoverflow.com/questions/206788/why-does-xdebug-crash-apache-on-every-xampp-install-ive-tried http://bugs.xdebug.org/view.php?id=459 https://bugs.eclipse.org/bugs/show_bug.cgi?id=312951#c8 http://stackoverflow.com/questions/2799936/xdebug-for-php-5-2-on-windows-7-64bit and so and so on... SO, xdebug bug tracker, eclipse bugzilla, etc, etc Basically what would be great is if folks could post their working (i.e. debugging with breakpoints and local variable viewing in Eclipse) Win7 64bit configurations, including: PHP version (5.3.1, 5.2.11, etc) Xdebug dll (2.1.0-5.3-vc6, etc) Xdebug php.ini config (zend_extension = "C:\xampp\php\ext\php_xdebug.dll", etc) Apache version (2.2.14, etc) Eclipse version Anything else important? The "secret ingredient"? Thanks! I miss my debugger since I got a new laptop with Win 7! Sadly it looks like some of the drivers (switchable graphics, multi-touch pad, etc) on my lappy don't work right with Ubuntu yet, so I feel a bit trapped on Win :( I know I will figure something out eventually, but I've been at this trial-and-error game a while and am seeking some guidance. (Originally posted on StackOverflow here, but moved to SuperUser:) http://stackoverflow.com/questions/4628215/what-php-xdebug-and-eclipse-configurations-work-on-windows-7-64-bit

  Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >