Search Results

Search found 23648 results on 946 pages for 'tab size'.

Page 224/946 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

  • How do I go about overloading C++ operators to allow for chaining?

    - by fneep
    I, like so many programmers before me, am tearing my hair out writing the right-of-passage-matrix-class-in-C++. I have never done very serious operator overloading and this is causing issues. Essentially, by stepping through This is what I call to cause the problems. cMatrix Kev = CT::cMatrix::GetUnitMatrix(4, true); Kev *= 4.0f; cMatrix Baz = Kev; Kev = Kev+Baz; //HERE! What seems to be happening according to the debugger is that Kev and Baz are added but then the value is lost and when it comes to reassigning to Kev, the memory is just its default dodgy values. How do I overload my operators to allow for this statement? My (stripped down) code is below. //header class cMatrix { private: float* _internal; UInt32 _r; UInt32 _c; bool _zeroindexed; //fast, assumes zero index, no safety checks float cMatrix::_getelement(UInt32 r, UInt32 c) { return _internal[(r*this->_c)+c]; } void cMatrix::_setelement(UInt32 r, UInt32 c, float Value) { _internal[(r*this->_c)+c] = Value; } public: cMatrix(UInt32 r, UInt32 c, bool IsZeroIndexed); cMatrix( cMatrix& m); ~cMatrix(void); //operators cMatrix& operator + (cMatrix m); cMatrix& operator += (cMatrix m); cMatrix& operator = (const cMatrix &m); }; //stripped source file cMatrix::cMatrix(cMatrix& m) { _r = m._r; _c = m._c; _zeroindexed = m._zeroindexed; _internal = new float[_r*_c]; UInt32 size = GetElementCount(); for (UInt32 i = 0; i < size; i++) { _internal[i] = m._internal[i]; } } cMatrix::~cMatrix(void) { delete[] _internal; } cMatrix& cMatrix::operator+(cMatrix m) { return cMatrix(*this) += m; } cMatrix& cMatrix::operator*(float f) { return cMatrix(*this) *= f; } cMatrix& cMatrix::operator*=(float f) { UInt32 size = GetElementCount(); for (UInt32 i = 0; i < size; i++) { _internal[i] *= f; } return *this; } cMatrix& cMatrix::operator+=(cMatrix m) { if (_c != m._c || _r != m._r) { throw new cCTException("Cannot add two matrix classes of different sizes."); } if (!(_zeroindexed && m._zeroindexed)) { throw new cCTException("Zero-Indexed mismatch."); } for (UInt32 row = 0; row < _r; row++) { for (UInt32 column = 0; column < _c; column++) { float Current = _getelement(row, column) + m._getelement(row, column); _setelement(row, column, Current); } } return *this; } cMatrix& cMatrix::operator=(const cMatrix &m) { if (this != &m) { _r = m._r; _c = m._c; _zeroindexed = m._zeroindexed; delete[] _internal; _internal = new float[_r*_c]; UInt32 size = GetElementCount(); for (UInt32 i = 0; i < size; i++) { _internal[i] = m._internal[i]; } } return *this; }

    Read the article

  • Radix sort in java help

    - by endif
    Hi i need some help to improve my code. I am trying to use Radixsort to sort array of 10 numbers (for example) in increasing order. When i run the program with array of size 10 and put 10 random int numbers in like 70 309 450 279 799 192 586 609 54 657 i get this out: 450 309 192 279 54 192 586 657 54 609 Don´t see where my error is in the code. class IntQueue { static class Hlekkur { int tala; Hlekkur naest; } Hlekkur fyrsti; Hlekkur sidasti; int n; public IntQueue() { fyrsti = sidasti = null; } // First number in queue. public int first() { return fyrsti.tala; } public int get() { int res = fyrsti.tala; n--; if( fyrsti == sidasti ) fyrsti = sidasti = null; else fyrsti = fyrsti.naest; return res; } public void put( int i ) { Hlekkur nyr = new Hlekkur(); n++; nyr.tala = i; if( sidasti==null ) f yrsti = sidasti = nyr; else { sidasti.naest = nyr; sidasti = nyr; } } public int count() { return n; } public static void radixSort(int [] q, int n, int d){ IntQueue [] queue = new IntQueue[n]; for (int k = 0; k < n; k++){ queue[k] = new IntQueue(); } for (int i = d-1; i >=0; i--){ for (int j = 0; j < n; j++){ while(queue[j].count() != 0) { queue[j].get(); } } for (int index = 0; index < n; index++){ // trying to look at one of three digit to sort after. int v=1; int digit = (q[index]/v)%10; v*=10; queue[digit].put(q[index]); } for (int p = 0; p < n; p++){ while(queue[p].count() != 0) { q[p] = (queue[p].get()); } } } } } I am also thinking can I let the function take one queue as an argument and on return that queue is in increasing order? If so how? Please help. Sorry if my english is bad not so good in it. Please let know if you need more details. import java.util.Random; public class RadTest extends IntQueue { public static void main(String[] args) { int [] q = new int[10]; Random r = new Random(); int t = 0; int size = 10; while(t != size) { q[t] = (r.nextInt(1000)); t++; } for(int i = 0; i!= size; i++) { System.out.println(q[i]); } System.out.println("Radad: \n"); radixSort(q,size,3); for(int i = 0; i!= size; i++) { System.out.println(q[i]); } } } Hope this is what you were talking about...

    Read the article

  • packet mmap send packet format

    - by SeregASM
    I want to improve packet transmitting performance. Before that I used raw sockets and now I study packet_mmap. I have packets(frames) which I already captured from kernel module from another PC, put to current PC and now I want to retransmit them to local interface with following forwarding. I have got example of packet_mmap, integrated it to my project, but I send fd_socket = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); memset(&my_addr, 0, sizeof(struct sockaddr_ll)); my_addr.sll_family = PF_PACKET; my_addr.sll_protocol = htons(ETH_P_ALL); strcpy(str_devname, "eth0"); strncpy(s_ifr.ifr_name, str_devname, sizeof(s_ifr.ifr_name)); ec = ioctl(fd_socket, SIOCGIFINDEX, &s_ifr); i_ifindex = s_ifr.ifr_ifindex; memset(&my_addr, 0, sizeof(struct sockaddr_ll)); my_addr.sll_family = AF_PACKET; my_addr.sll_protocol = ETH_P_ALL; my_addr.sll_ifindex = i_ifindex; bind(fd_socket, (struct sockaddr *) &my_addr, sizeof(struct sockaddr_ll) s_packet_req.tp_block_size = c_buffer_sz; s_packet_req.tp_frame_size = c_buffer_sz; s_packet_req.tp_block_nr = c_buffer_nb; s_packet_req.tp_frame_nr = c_buffer_nb; size = s_packet_req.tp_block_size * s_packet_req.tp_block_nr; if (setsockopt(fd_socket, SOL_PACKET, PACKET_TX_RING, (char *) &s_packet_req, sizeof(s_packet_req)) < 0) { perror("setsockopt: PACKET_TX_RING"); return; } if (c_sndbuf_sz) { printf("send buff size = %d\n", c_sndbuf_sz); if (setsockopt(fd_socket, SOL_SOCKET, SO_SNDBUF, &c_sndbuf_sz, sizeof(c_sndbuf_sz)) < 0){ perror("getsockopt: SO_SNDBUF"); exit(1); } } data_offset = TPACKET_HDRLEN - sizeof(struct sockaddr_ll); printf("data offset = %d bytes\n", data_offset); ps_header_start = (tpacket_hdr *) mmap(0, size, PROT_READ | PROT_WRITE, MAP_SHARED, fd_socket, 0); if (ps_header_start == (void*) -1) { perror("mmap"); exit(1); } Then I fill data ps_header = ((struct tpacket_hdr *) ((char *) ps_header_start + (c_buffer_sz * i_index))); if (!ps_header) { perror("ps_header") ; return NULL; } data = ((char*) ps_header) + data_offset; switch ((volatile uint32_t) ps_header->tp_status) { case TP_STATUS_AVAILABLE: printf("TP_STATUS_AVAILABLE, index=%d\n",i_index) ; memcpy(data, packet_data, size); pthread_mutex_lock(&index_locker) ; i_index++; pthread_mutex_unlock(&index_locker) ; if (i_index >= c_buffer_nb) { i_index = 0; first_loop = 0; } /* update packet len */ ps_header->tp_len = size; /* set header flag to USER (trigs xmit)*/ ps_header->tp_status = TP_STATUS_SEND_REQUEST; then I send ec_send = sendto(fd_socket, NULL, 0, 0, (struct sockaddr *) ps_sockaddr, sizeof(struct sockaddr_ll)); I have got no errors, ec_send=not null size of sended data. But there are no data routed to destination host. So, I ask - what data I should pass to ring buffer, now I include headers ip,tcp, should I include MAC header? - May be I have to set additional flags to route my packets.

    Read the article

  • Scrolling a canvas as a shape you're moving approaches its edges

    - by Steven Sproat
    Hi, I develop a Python-based drawing program, Whyteboard. I have tools that the user can create new shapes on the canvas, such as text/images/rectangles/circles/polygons. I also have a Select tool that allows the users to modify these shapes - for example, moving a shape's position, resizing, or editing polygon's points' positions. I'm adding in a new feature where moving or resizing a point near the canvas edge will automatically scroll the canvas. I think it's a good idea in terms of program usability, and annoys me when other program's don't have this feature. I've made some good progress on coding this; below is some Python code to demonstrate what I'm doing. These functions demonstrate how some shapes calculate their "edges": def find_edges(self): """A line.""" self.edges = {EDGE_TOP: min(self.y, self.y2), EDGE_RIGHT: max(self.x, self.x2), EDGE_BOTTOM: max(self.y, self.y2), EDGE_LEFT: min(self. x, self.x2)} def find_edges(self): """An image""" self.edges = {EDGE_TOP: self.y, EDGE_RIGHT: self.x + self.image.GetWidth(), EDGE_BOTTOM: self.y + self.image.GetWidth(), EDGE_LEFT: self.x} def find_edges(self): """Get the bounding rectangle for the polygon""" xmin = min(x for x, y in self.points) ymin = min(y for x, y in self.points) xmax = max(x for x, y in self.points) ymax = max(y for x, y in self.points) self.edges = {EDGE_TOP: ymin, EDGE_RIGHT: xmax, EDGE_BOTTOM: ymax, EDGE_LEFT: xmin} And here's the code I have so far to implement the scrolling when a shape nears the edge: def check_canvas_scroll(self, x, y, moving=False): """ We check that the x/y coords are within 50px from the edge of the canvas and scroll the canvas accordingly. If the shape is being moved, we need to check specific edges of the shape (e.g. left/right side of rectangle) """ size = self.board.GetClientSizeTuple() # visible area of the canvas if not self.board.area > size: # canvas is too small to need to scroll return start = self.board.GetViewStart() # user's starting "viewport" scroll = (-1, -1) # -1 means no change if moving: if self.shape.edges[EDGE_RIGHT] > start[0] + size[0] - 50: scroll = (start[0] + 5, -1) if self.shape.edges[EDGE_BOTTOM] > start[1] + size[1] - 50: scroll = (-1, start[1] + 5) # snip others else: if x > start[0] + size[0] - 50: scroll = (start[0] + 5, -1) if y > start[1] + size[1] - 50: scroll = (-1, start[1] + 5) # snip others self.board.Scroll(*scroll) This code actually works pretty well. If we're moving a shape, then we need to know its edges to calculate when they're coming close to the canvas edge. If we're resizing just a single point, then we just use the x/y coords of that point to see if it's close to the edge. The problem I'm having is a little tricky to describe - basically, if you move a shape to the left, and stop moving it, if you positioned the shape within the 50px from the canvas, then the next time you go to move the shape, the code that says "ok, is this shape close to the end?" gets triggered, and the canvas scrolls to the left, even if you're moving the shape to the right. Can anyone think on how to stop this? I created a youtube video to demonstrate the issue. At about 0:54, I move a polygon to the left of the canvas and position it there. The next time I move it, the canvas scrolls to the left even though I'm moving it right Another thing I'd like to add, but I'm stuck on is the scroll gaining momentum the longer a shape is scrolling? So, with a large canvas, you're not moving a shape for ages, moving 5px at a time, when you need to cover a 2000px distance. Any suggestions there? Thanks all - sorry for the super long question!

    Read the article

  • UIView, UIScrollView and UITextFields problem calling Method

    - by Jeff Groby
    I have a view with several embedded UITextFields, this UIView is subordinated to a UIScrollView in IB. Each text field is supposed to invoke a method called updateText defined in the viewcontroller implementation file when the user is done editing the field. For some reason, the method updateText never gets invoked. Anyone have any ideas how to go about fixing this? The method fired off just fine when the UIScrollView was not present in the project but the keyboard would cover the text fields during input, which was annoying. Now my textfields move up above the keyboard when it appears, but won't fire off the method when done editing. Here is my implementation file: #import "MileMarkerViewController.h" @implementation MileMarkerViewController @synthesize scrollView,milemarkerLogDate,milemarkerDesc,milemarkerOdobeg,milemarkerOdoend,milemarkerBusiness,milemarkerPersonal,milemarker; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) { // Initialization code } return self; } - (BOOL) textFieldShouldReturn: (UITextField*) theTextField { return [theTextField resignFirstResponder]; } - (void)viewDidLoad { [super viewDidLoad]; [[NSNotificationCenter defaultCenter] addObserver: self selector: @selector(keyboardWasShown:) name: UIKeyboardDidShowNotification object: nil]; [[NSNotificationCenter defaultCenter] addObserver: self selector: @selector(keyboardWasHidden:) name: UIKeyboardDidHideNotification object: nil]; keyboardShown = NO; // 1 [scrollView setContentSize: CGSizeMake( 320, 480)]; // 2 } - (void)keyboardWasShown:(NSNotification*)aNotification { if (keyboardShown) return; NSDictionary* info = [aNotification userInfo]; // Get the size of the keyboard. NSValue* aValue = [info objectForKey:UIKeyboardBoundsUserInfoKey]; CGSize keyboardSize = [aValue CGRectValue].size; // Resize the scroll view (which is the root view of the window) CGRect viewFrame = [scrollView frame]; viewFrame.size.height -= keyboardSize.height; scrollView.frame = viewFrame; // Scroll the active text field into view. CGRect textFieldRect = [activeField frame]; [scrollView scrollRectToVisible:textFieldRect animated:YES]; keyboardShown = YES; } - (void)keyboardWasHidden:(NSNotification*)aNotification { NSDictionary* info = [aNotification userInfo]; // Get the size of the keyboard. NSValue* aValue = [info objectForKey:UIKeyboardBoundsUserInfoKey]; CGSize keyboardSize = [aValue CGRectValue].size; // Reset the height of the scroll view to its original value CGRect viewFrame = [scrollView frame]; viewFrame.size.height += keyboardSize.height; [scrollView scrollRectToVisible:CGRectMake(0, 0, 1, 1) animated:YES]; scrollView.frame = viewFrame; keyboardShown = NO; } - (void)textFieldDidBeginEditing:(UITextField *)textField { activeField = textField; } - (void)textFieldDidEndEditing:(UITextField *)textField { activeField = nil; } - (IBAction)updateText:(id) sender { NSLog(@"You just entered: %@",self.milemarkerLogDate.text); self.milemarker.logdate = self.milemarkerLogDate.text; self.milemarker.desc = self.milemarkerDesc.text; self.milemarker.odobeg = self.milemarkerOdobeg.text; self.milemarker.odoend = self.milemarkerOdoend.text; self.milemarker.business = self.milemarkerBusiness.text; self.milemarker.personal = self.milemarkerPersonal.text; NSLog(@"Original textfield is set to: %@",self.milemarker.logdate); [self.milemarker updateText]; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)dealloc { [super dealloc]; } @end

    Read the article

  • My Optin form doesn't work in Internet Explorer, but works fine in Firefox.

    - by Allen
    I have the following code for my optin form: <script language="JavaScript"> function checkSub(){ if (document.signup.email.value.indexOf('@', 0) == -1) { alert("Please fill in your valid Email address.\nYour email should be in the following format: [email protected]"); document.signup.email.focus(); return false} else if (!document.signup.terms.checked) { alert("You must read and agree to the terms"); document.signup.terms.focus(); return false} else { switch(document.signup.extra1.value) { case "Platinum": answer = confirm("By clicking OK you confirm that you have\nalready entered the World Cup Giveaway\nas a Platinum upgrade contributor.\n\nIf you have not yet entered the giveaway\nclick Cancel.\n\nYou can enter using the link at the\nbottom of the page.\n\nIf you have already entered the giveaway\nusing a link other than my invitation link\nyou are not eligible for this offer."); if (!answer) { return false} break; case "Gold": answer = confirm("By clicking OK you confirm that you have\nalready entered the World Cup Giveaway\nas a Gold upgrade contributor.\n\nIf you have not yet entered the giveaway\nclick Cancel.\n\nYou can enter using the link at the\nbottom of the page. \n\nIf you have already entered the giveaway\nusing a link other than my invitation link\nyou are not eligible for this offer."); if (!answer) { return false} break; default: alert("You must sign up as a contributor to the \nWorld Cup Giveaway to take advantage of \nthis offer.\n\nPlease click the link at the bottom of this \npage or at the blog post mentioned below \nto sign up.\n\nIf you have already signed up using \nthis link, please select the upgrade level\nyou chose on signup or select \"Free\" if \nyou signed up as a free contributor.\n\nIf you have already entered the giveaway\nusing a link other than my invitation link\nyou are not eligible for this offer.\n\nNote: This page may not function properly\nif viewed in languages other than English."); return false} } } </script> <form action="http://ebizac.com/ar/optin.php" method="post" name="signup" onsubmit="return checkSub()"> <input type=hidden name="action" value="addlead"> <input type=hidden name="member" value="2315"> <input type=hidden name="auto" value="7584"> <input type=hidden name="thankyou" value="http://plr.forinternetnewbies.com/Offer1"> <input type=hidden name="resubsetting" value="Y"> <input type=hidden name="resubredirect" value=""> <input type=hidden name="invalid_redirect" value=""> <div style="padding:0 0 0 10px;"> <table border=0 cellspacing=0 cellpadding=2><tr><td class="label"><font size="2" face="arial, verdana">Name:</font></td><td><input type=text size=20 name="fname"></td></tr> <tr><td class="label" width="150"><font size="2" face="arial, verdana">Email address:</font></span></td><td><input type=text size=20 name="email"></td></tr> <tr><td class="label"><font size="2" face="arial, verdana">Upgrade Level:</font></td><td><select size=1 name="extra1"><option>Haven't Joined Yet</option><option>Platinum</option><option>Gold</option><option>Silver</option><option>Free</option></td></tr> <tr><td></td><td align=center><input type="checkbox" name="terms" value="agree">I agree to the terms as described on the <a href="http://short9.com/blog0522-sp" target="_blank">blog post</a> </td></tr> <tr><td></td><td align=center><input type="submit" value="Contribute Now"></td></tr></table></div></form> Everything does what I expect in Firefox, but in Internet Explorer the switch statement always goes to the default case. I tested with an extra alert(signup.extra1.value) in the default case and it shows an empty string. What could be the problem here?

    Read the article

  • Code runs 6 times slower with 2 threads than with 1

    - by Edward Bird
    So I have written some code to experiment with threads and do some testing. The code should create some numbers and then find the mean of those numbers. I think it is just easier to show you what I have so far. I was expecting with two threads that the code would run about 2 times as fast. Measuring it with a stopwatch I think it runs about 6 times slower! void findmean(std::vector<double>*, std::size_t, std::size_t, double*); int main(int argn, char** argv) { // Program entry point std::cout << "Generating data..." << std::endl; // Create a vector containing many variables std::vector<double> data; for(uint32_t i = 1; i <= 1024 * 1024 * 128; i ++) data.push_back(i); // Calculate mean using 1 core double mean = 0; std::cout << "Calculating mean, 1 Thread..." << std::endl; findmean(&data, 0, data.size(), &mean); mean /= (double)data.size(); // Print result std::cout << " Mean=" << mean << std::endl; // Repeat, using two threads std::vector<std::thread> thread; std::vector<double> result; result.push_back(0.0); result.push_back(0.0); std::cout << "Calculating mean, 2 Threads..." << std::endl; // Run threads uint32_t halfsize = data.size() / 2; uint32_t A = 0; uint32_t B, C, D; // Split the data into two blocks if(data.size() % 2 == 0) { B = C = D = halfsize; } else if(data.size() % 2 == 1) { B = C = halfsize; D = hsz + 1; } // Run with two threads thread.push_back(std::thread(findmean, &data, A, B, &(result[0]))); thread.push_back(std::thread(findmean, &data, C, D , &(result[1]))); // Join threads thread[0].join(); thread[1].join(); // Calculate result mean = result[0] + result[1]; mean /= (double)data.size(); // Print result std::cout << " Mean=" << mean << std::endl; // Return return EXIT_SUCCESS; } void findmean(std::vector<double>* datavec, std::size_t start, std::size_t length, double* result) { for(uint32_t i = 0; i < length; i ++) { *result += (*datavec).at(start + i); } } I don't think this code is exactly wonderful, if you could suggest ways of improving it then I would be grateful for that also.

    Read the article

  • App is crashing as soon as UITableView gets reloaded

    - by OhhMee
    Hello, I'm developing an app where TableView needs to reload as soon as the login process gets completed. The app crashes with error EXC_BAD_ACCESS when the table data gets reloaded. It doesn't crash when I remove all case instances except case 0: What could be the reason behind it? Here's the code: - (void)viewDidLoad { [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(loginDone:) name:@"loginDone" object:nil]; statTableView.backgroundColor = [UIColor clearColor]; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger) section { return 6; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier]; } // Configure the cell. switch (indexPath.row) { case 0 : cell.textLabel.text = @"Foo:"; NSLog(@"%@", data7); UILabel *myLabel2 = [[UILabel alloc] initWithFrame:CGRectMake(200, 10, 20, 30)]; myLabel2.text = (@"%@", data7); myLabel2.textColor = [UIColor blackColor]; myLabel2.backgroundColor = [UIColor whiteColor]; myLabel2.font = [UIFont fontWithName:@"Trebuchet MS" size:14]; [cell.contentView addSubview:myLabel2]; break; case 1: cell.textLabel.text = @"Foo: "; UILabel *myLabel4 = [[UILabel alloc] initWithFrame:CGRectMake(200, 10, 20, 30)]; myLabel4.text = (@"%@", data11); myLabel4.textColor = [UIColor blackColor]; myLabel4.backgroundColor = [UIColor whiteColor]; myLabel4.font = [UIFont fontWithName:@"Trebuchet MS" size:14]; [cell.contentView addSubview:myLabel4]; break; case 2: cell.textLabel.text = @"Foo: "; UILabel *myLabel8 = [[UILabel alloc] initWithFrame:CGRectMake(200, 10, 20, 30)]; myLabel8.text = (@"%@", data3); myLabel8.textColor = [UIColor blackColor]; myLabel8.backgroundColor = [UIColor whiteColor]; myLabel8.font = [UIFont fontWithName:@"Trebuchet MS" size:14]; [cell.contentView addSubview:myLabel8]; break; case 3: cell.textLabel.text = @"Foo: "; UILabel *myLabel10 = [[UILabel alloc] initWithFrame:CGRectMake(200, 10, 20, 30)]; myLabel10.text = [NSString stringWithFormat:@"%@", data4]; if ([data4 isEqualToString:@"0"]) { myLabel10.text = @"None"; } myLabel10.textColor = [UIColor blackColor]; myLabel10.backgroundColor = [UIColor whiteColor]; myLabel10.font = [UIFont fontWithName:@"Trebuchet MS" size:14]; [cell.contentView addSubview:myLabel10]; break; case 4: cell.textLabel.text = @"Foo: "; UILabel *myLabel12 = [[UILabel alloc] initWithFrame:CGRectMake(200, 10, 20, 30)]; myLabel12.text = [NSString stringWithFormat:@"%@", data5]; myLabel12.textColor = [UIColor blackColor]; if ([data5 isEqualToString:@"Foo"]) { myLabel12.textColor = [UIColor redColor]; myLabel12.text = @"Nil"; } myLabel12.backgroundColor = [UIColor whiteColor]; myLabel12.font = [UIFont fontWithName:@"Trebuchet MS" size:14]; [cell.contentView addSubview:myLabel12]; break; case 5: cell.textLabel.text = @"Foo: "; UILabel *myLabel14 = [[UILabel alloc] initWithFrame:CGRectMake(200, 10, 50, 30)]; if ([data6 isEqualToString:@"Foo"]) { myLabel14.textColor = [UIColor colorWithRed:(0/255.f) green:(100/255.f) blue:(0/255.f) alpha:1.0]; myLabel14.text = @"No Dues"; } else { myLabel14.text = [NSString stringWithFormat:@"%@", data6]; myLabel14.textColor = [UIColor redColor]; } myLabel14.backgroundColor = [UIColor whiteColor]; myLabel14.font = [UIFont fontWithName:@"Trebuchet MS" size:14]; [cell.contentView addSubview:myLabel14]; break; /* [myLabel2 release]; [myLabel4 release]; [myLabel8 release]; [myLabel10 release]; [myLabel12 release]; [myLabel14 release]; */ } return cell; }

    Read the article

  • bubble sort on array of c structures not sorting properly

    - by xmpirate
    I have the following program for books record and I want to sort the records on name of book. the code isn't showing any error but it's not sorting all the records. #include "stdio.h" #include "string.h" #define SIZE 5 struct books{ //define struct char name[100],author[100]; int year,copies; }; struct books book1[SIZE],book2[SIZE],*pointer; //define struct vars void sort(struct books *,int); //define sort func main() { int i; char c; for(i=0;i<SIZE;i++) //scanning values { gets(book1[i].name); gets(book1[i].author); scanf("%d%d",&book1[i].year,&book1[i].copies); while((c = getchar()) != '\n' && c != EOF); } pointer=book1; sort(pointer,SIZE); //sort call i=0; //printing values while(i<SIZE) { printf("##########################################################################\n"); printf("Book: %s\nAuthor: %s\nYear of Publication: %d\nNo of Copies: %d\n",book1[i].name,book1[i].author,book1[i].year,book1[i].copies); printf("##########################################################################\n"); i++; } } void sort(struct books *pointer,int n) { int i,j,sorted=0; struct books temp; for(i=0;(i<n-1)&&(sorted==0);i++) //bubble sort on the book name { sorted=1; for(j=0;j<n-i-1;j++) { if(strcmp((*pointer).name,(*(pointer+1)).name)>0) { //copy to temp val strcpy(temp.name,(*pointer).name); strcpy(temp.author,(*pointer).author); temp.year=(*pointer).year; temp.copies=(*pointer).copies; //copy next val strcpy((*pointer).name,(*(pointer+1)).name); strcpy((*pointer).author,(*(pointer+1)).author); (*pointer).year=(*(pointer+1)).year; (*pointer).copies=(*(pointer+1)).copies; //copy back temp val strcpy((*(pointer+1)).name,temp.name); strcpy((*(pointer+1)).author,temp.author); (*(pointer+1)).year=temp.year; (*(pointer+1)).copies=temp.copies; sorted=0; } *pointer++; } } } My Imput The C Programming Language X Y Z 1934 56 Inferno Dan Brown 1993 453 harry Potter and the soccers stone J K Rowling 2012 150 Ruby On Rails jim aurther nil 2004 130 Learn Python Easy Way gmaps4rails 1967 100 And the output ########################################################################## Book: Inferno Author: Dan Brown Year of Publication: 1993 No of Copies: 453 ########################################################################## ########################################################################## Book: The C Programming Language Author: X Y Z Year of Publication: 1934 No of Copies: 56 ########################################################################## ########################################################################## Book: Ruby On Rails Author: jim aurther nil Year of Publication: 2004 No of Copies: 130 ########################################################################## ########################################################################## Book: Learn Python Easy Way Author: gmaps4rails Year of Publication: 1967 No of Copies: 100 ########################################################################## ########################################################################## Book: Author: Year of Publication: 0 No of Copies: 0 ########################################################################## We can see the above sorting is wrong? What I'm I doing wrong?

    Read the article

  • C++ - Unwanted characters printed in output file.

    - by Gabe
    This is the last part of the program I am working on. I want to output a tabular list of songs to cout. And then I want to output a specially formatted list of song information into fout (which will be used as an input file later on). Printing to cout works great. The problem is that tons of extra character are added when printing to fout. Any ideas? Here's the code: void Playlist::printFile(ofstream &fout, LinkedList<Playlist> &allPlaylists, LinkedList<Songs*> &library) { fout.open("music.txt"); if(fout.fail()) { cout << "Output file failed. Information was not saved." << endl << endl; } else { if(library.size() > 0) fout << "LIBRARY" << endl; for(int i = 0; i < library.size(); i++) // For Loop - "Incremrenting i"-Loop to go through library and print song information. { fout << library.at(i)->getSongName() << endl; // Prints song name. fout << library.at(i)->getArtistName() << endl; // Prints artist name. fout << library.at(i)->getAlbumName() << endl; // Prints album name. fout << library.at(i)->getPlayTime() << " " << library.at(i)->getYear() << " "; fout << library.at(i)->getStarRating() << " " << library.at(i)->getSongGenre() << endl; } if(allPlaylists.size() <= 0) fout << endl; else if(allPlaylists.size() > 0) { int j; for(j = 0; j < allPlaylists.size(); j++) // Loops through all playlists. { fout << "xxxxx" << endl; fout << allPlaylists.at(j).getPlaylistName() << endl; for(int i = 0; i < allPlaylists.at(j).listSongs.size(); i++) { fout << allPlaylists.at(j).listSongs.at(i)->getSongName(); fout << endl; fout << allPlaylists.at(j).listSongs.at(i)->getArtistName(); fout << endl; } } fout << endl; } } } Here's a sample of the output to music.txt (fout): LIBRARY sadljkhfds dfgkjh dfkgh 3 3333 3 Rap sdlkhs kjshdfkh sdkjfhsdf 3 33333 3 Rap xxxxx PayröÈöè÷÷(÷H÷h÷÷¨÷È÷èøø(øHøhøø¨øÈøèùù(ùHùhùù¨ùÈùèúú(úHúhúú¨úÈúèûû(ûHûhûû¨ûÈûèüü(üHühüü¨üÈüèýý(ýHýhý ! sdkjfhsdf!õüöýÄõ¼5! sadljkhfds!þõÜö|ö\ þx þ  þÈ þð ÿ ÿ@ ÿh ÿ ÿ¸ ÿà 0 X ¨ Ð ø enter code here enter code here

    Read the article

  • Styling an Input Field

    - by John
    Hello When I try to alter the CSS for the input field named "title" below, which is classed by "submissionfield", the position changes, but the height, length, and font of the field do not change. How could I make the height of the input field "title" 22 px, the length 550 px, and the font Times New Roman? The CSS below does not do it. Thanks in advance, John echo '<form action="http://www...com/.../submit2.php" method="post"> <input type="hidden" value="'.$_SESSION['loginid'].'" name="uid"> <div class="submissiontitle"><label for="title">Story Title:</label></div> <div class="submissionfield"><input name="title" type="title" id="title" maxlength="1000"></div> <div class="urltitle"><label for="url">Link:</label></div> <div class="urlfield"><input name="url" type="url" id="url" maxlength="500"></div> <div class="submissionbutton"><input name="submit" type="submit" value="Submit"></div> </form> '; The CSS: .submissiontitle { position:absolute; width:100px; left:30px; top:200px; text-align: left; margin-bottom:3px; padding:0px; font-family:Arial, Helvetica, sans-serif; font-size: 12px; color:#000000; } .submissionfield { position:absolute; width:550px; left:50px; top:230px; text-align: left; margin-bottom:3px; padding:0px; font-family: "Times New Roman", Times, serif; font-size: 22px; color:#000000; } .urltitle { position:absolute; width:250px; left:30px; top:300px; text-align: left; margin-bottom:3px; padding:0px; font-family:Arial, Helvetica, sans-serif; font-size: 12px; color:#000000; } .urlfield { position:absolute; width:550px; left:30px; top:330px; text-align: left; margin-bottom:3px; padding:0px; font-family:Arial, Helvetica, sans-serif; font-size: 11px; color:#000000; } .submissionbutton { position:absolute; width:250px; left:30px; top:380px; text-align: left; margin-bottom:3px; padding:0px; font-family:Arial, Helvetica, sans-serif; font-size: 11px; color:#000000; } .submittitle { position:absolute; width:250px; left:30px; top:150px; text-align: left; margin-bottom:3px; padding:0px; font-family:Arial, Helvetica, sans-serif; font-size: 12px; color:#000000; }

    Read the article

  • Need help with regex parsing (in perl)

    - by Charlie
    Hi all, need some help parsing an html file in perl. I used the LWP module to retrieve a webpage into $_ with $/ undefined so there are no newline issues. Then I'm trying to find all strings matching a pattern. How do I do that? I know how to find 1 instance of it, but how do I match all instances? and what data structure would the results go to? a multi dimensional array? my text (excerpt) looks like the following: <TR> <TD BGCOLOR=EEEEEE><A HREF="/program.cgi?pid=1233"><FONT FACE="ARIAL,HELVETICA,SANS-SERIF" SIZE=2>Title 1</A></FONT></TD> <TD BGCOLOR=EEEEEE nowrap><FONT FACE="ARIAL,HELVETICA" SIZE=2>Jun 27 2010 3:00PM</FONT></TD> <TD BGCOLOR=EEEEEE>&nbsp;</TD> </TR> <TR><TD BGCOLOR=EEEEEE COLSPAN=3><IMG SRC="http://images.domain.com/images/spacer.gif" WIDTH=1 HEIGHT=2><BR></TD></TR> <TR><TD COLSPAN=3 BGCOLOR=999999><IMG SRC="http://images.domain.com/images/spacer.gif" HEIGHT=1 WIDTH=1></TD></TR> <TR><TD COLSPAN=3 ><IMG SRC="http://images.domain.com/images/spacer.gif" WIDTH=1 HEIGHT=2><BR></TD></TR> <TR> <TD><A HREF="/program.cgi?pid=1234"><FONT FACE="ARIAL,HELVETICA,SANS-SERIF" SIZE=2>Title 2</A></FONT></TD> <TD nowrap><FONT FACE="ARIAL,HELVETICA" SIZE=2>Jun 29 2010 7:00PM</FONT></TD> <TD>&nbsp;</TD> </TR> <TR><TD COLSPAN=3><IMG SRC="http://images.domain.com/images/spacer.gif" WIDTH=1 HEIGHT=2><BR></TD></TR> <TR><TD COLSPAN=3 BGCOLOR=999999><IMG SRC="http://images.domain.com/images/spacer.gif" HEIGHT=1 WIDTH=1></TD></TR> <TR><TD COLSPAN=3 BGCOLOR=EEEEEE><IMG SRC="http://images.domain.com/images/spacer.gif" WIDTH=1 HEIGHT=2><BR></TD></TR> <TR> <TD BGCOLOR=EEEEEE><A HREF="/program.cgi?pid=1235"><FONT FACE="ARIAL,HELVETICA,SANS-SERIF" SIZE=2>Title 3</A></FONT></TD> <TD BGCOLOR=EEEEEE nowrap><FONT FACE="ARIAL,HELVETICA" SIZE=2>Jul 3 2010 7:00PM</FONT></TD> <TD BGCOLOR=EEEEEE>&nbsp;</TD> </TR> I want to get the following into an array (or any structure): { ["/program.cgi?pdi=1233", "Title 1"], ["/program.cgi?pdi=1234", "Title 2"], ["/program.cgi?pdi=1235", "Title 3"] } Thanks

    Read the article

  • Constructors taking references in C++

    - by sasquatch
    I'm trying to create constructor taking reference to an object. After creating object using reference I need to prints field values of both objects. Then I must delete first object, and once again show values of fields of both objects. My class Person looks like this : class Person { char* name; int age; public: Person(){ int size=0; cout << "Give length of char*" << endl; cin >> size; name = new char[size]; age = 0; } ~Person(){ cout << "Destroying resources" << endl; delete[] name; delete age; } void init(char* n, int a) { name = n; age = a; } }; Here's my implementation (with the use of function show() ). My professor said that if this task is written correctly it will return an error. #include <iostream> using namespace std; class Person { char* name; int age; public: Person(){ int size=0; cout << "Give length of char*" << endl; cin >> size; name = new char[size]; age = 0; } Person(const Person& p){ name = p.name; age = p.age; } ~Person(){ cout << "Destroying resources" << endl; delete[] name; delete age; } void init(char* n, int a) { name = n; age = a; } void show(char* n, int a){ cout << "Name: " << name << "," << "age: " << age << "," << endl; } }; int main(void) { Person *p = new Person; p->init("Mary", 25); p->show(); Person &p = pRef; pRef->name = "Tom"; pRef->age = 18; Person *p2 = new Person(pRef); p->show(); p2->show(); system("PAUSE"); return 0; }

    Read the article

  • Type for use in template object to compare double values

    - by DaClown
    I got this n-dimensional point object: template <class T, unsigned int dimension> class Obj { protected: T coords[dimension]; static const unsigned int size = dimension; public: Obj() { }; Obj(T def) { for (unsigned int i = 0; i < size; ++i) coords[i]=def; }; Obj(const Obj& o) { for (unsigned int i = 0; i < size; ++i) coords[i] = o.coords[i]; } const Obj& operator= (const Obj& rhs) { if (this != &rhs) for (unsigned int i = 0; i < size; ++i) coords[i] = rhs.coords[i]; return *this; } virtual ~Obj() { }; T get (unsigned int id) { if (id >= size) throw std::out_of_range("out of range"); return coords[id]; } void set (unsigned int id, T t) { if (id >= size) throw std::out_of_range("out of range"); coords[id] = t; } }; and a 3D point class which uses Obj as base class: template <class U> class Point3DBase : public Obj<U,3> { typedef U type; public: U &x, &y, &z; public: Point3DBase() : x(Obj<U,3>::coords[0]), y(Obj<U,3>::coords[1]), z(Obj<U,3>::coords[2]) { }; Point3DBase(U def) : Obj<U,3>(def), x(Obj<U,3>::coords[0]), y(Obj<U,3>::coords[1]), z(Obj<U,3>::coords[2]) { }; Point3DBase(U x_, U y_, U z_) : x(Obj<U,3>::coords[0]), y(Obj<U,3>::coords[1]), z(Obj<U,3>::coords[2]) { x = x_; y = y_; z= z_; }; Point3DBase(const Point3DBase& other) : x(Obj<U,3>::coords[0]), y(Obj<U,3>::coords[1]), z(Obj<U,3>::coords[2]) { x = other.x; y = other.y; z = other.z; } // several operators ... }; The operators, basically the ones for comparison, use the simple compare-the-member-object approach like: virtual friend bool operator== (const Point3DBase<U> &lhs, const Point3DBase<U> rhs) { return (lhs.x == rhs.x && lhs.y == rhs.y && lhs.z == rhs.z); } Then it occured to me that for the comparion of double values the simply equality approach is not very useful since double values should be compared with an error margin. What would be the best approach to introduce an error margin into the point? I thought about an epsDouble type as template parameter but I can't figure out how to achieve this.

    Read the article

  • What am I doing wrong?, linking in C++

    - by Facon
    I'm trying to code a simple base64 encoder/decoder (to test my programming skill). I can compile it, but it doesn't link, I've this message error: C:\Documents and Settings\Facon\Escritoriog++ base64.o main.o -o prueba.exe main.o:main.cpp:(.text+0x24a): undefined reference to `Base64Encode(std::vector const&)' collect2: ld returned 1 exit status Compiler & Linker: Mingw32 3.4.5 SO: Windows XP This is my source code: base64.h: #ifndef BASE64_H #define BASE64_H #include <iostream> #include <vector> typedef unsigned char byte; std::string Base64Encode(const std::vector<byte> &array); std::vector<byte> Base64Decode(const std::string &array); #endif base64.cpp: #include "base64.h" std::string Base64Encode(std::vector<byte> &array) { const char *base64_table = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"; const unsigned int size = array.size(); std::string output; for (unsigned int i = 0; (i < size); i++) { if ((size - i) > 3) { output.push_back(static_cast<char>(base64_table[array[i] >> 2])); output.push_back(static_cast<char>(base64_table[((array[i++] & 0x03) << 4) | ((array[i] & 0xF0) >> 4)])); output.push_back(static_cast<char>(base64_table[((array[i++] & 0x0F) << 2) | ((array[i] & 0xC0) >> 4)])); output.push_back(static_cast<char>(base64_table[array[i] & 0x3F])); } else if ((size - i) == 3) { output.push_back(static_cast<char>(base64_table[array[i] >> 2])); output.push_back(static_cast<char>(base64_table[((array[i++] & 0x03) << 4) | ((array[i] & 0xF0) >> 4)])); output.push_back(static_cast<char>(base64_table[(array[i] & 0x0F) << 2])); output.push_back(static_cast<char>('=')); } else if ((size - i) == 2) { output.push_back(static_cast<char>(base64_table[array[i] >> 2])); output.push_back(static_cast<char>(base64_table[(array[i] & 0x03) << 4])); output.push_back('='); output.push_back('='); } } return output; } std::vector<byte> Base64Decode(const std::string &array) // TODO { const char *base64_table = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"; } main.cpp: #include <iostream> #include <vector> #include "base64.h" using namespace std; int main(int argc, char *argv[]) { const char* prueba = "sure."; vector<byte> texto; string codificado; for (unsigned int i = 0; (prueba[i] != 0); i++) { texto.push_back(prueba[i]); } codificado = Base64Encode(texto); cout << codificado; return 0; } PD: Sorry for my bad knowledge of English :P

    Read the article

  • showing error on uploading a big file using php

    - by user1489969
    I have created a php code to display the upload option to upload multiple files as below: <?php $f_id= $_GET["id"]; ?> <title>Upload File</title> <form enctype="multipart/form-data" method="post" action="upload_hal_mult.php?id=<?php echo $f_id;?>" > <input type="hidden" name="MAX_FILE_SIZE" value="10000000"> <input id="infile" type="file" name="infile[]" multiple="true" /> <input type="submit" value="upload" name="file_uploaded" / > <br> <br> </form> So this will call "upload_hal_mult.php" when "upload" button is clicked. And the code for that is as follows: <title>Upload Results</title> <?php define("MAX_SIZE",10000000); $f_id= $_GET["id"]; $dir_name="dir_hal_".$f_id; $u=0; if (!is_dir($dir_name)) mkdir($dir_name); $dir=$dir_name."/"; $file_realname = $_FILES['infile']['name']; for ($i = 0; $i < count($_FILES['infile']['name']); $i++) { $ext = substr(strrchr($_FILES['infile']['name'][$i], "."), 1); $fname = substr($_FILES['infile']['name'][$i],0,strpos($_FILES['infile']['name'][$i], ".")); $fPath = $fname."_(".substr(md5(rand() * time()),0,4).")".".$ext"; echo "files size=".$_FILES["infile"]["size"][$i]."\n"; if($_FILES["infile"]["size"][$i]>MAX_SIZE) echo('File uploaded exceeds maximum upload size.'); if(($_FILES['infile']['error'][i]==0) && move_uploaded_file($_FILES['infile']['tmp_name'][$i], $dir . $fPath)) { $u=$u+1; ?> <!--<script type="text/javascript">setTimeout("window.close();", 1300);</script>--> <?php echo "Upload is successful\n"; } else echo "if stmt failed so error \n"; } if($u!=count($_FILES['infile']['name'])) echo "Error"; else echo "count is correct"; ?> This upload works correctly for files of size<10MB. But for files of size10MB, it's not echoing 'File uploaded exceeds maximum upload size.' as expected. Its also not uploading the file of size10MB. But the $u gets incremented. But none of the statements like "Upload is successful" or "if stmt failed so error" are being echoed as well. However the statement "count is correct" is being displayed, and this shows the $u got incremented somehow even though the echo statements didnt work! Can someone please point out the error I am doing here? I thought its simply a matter of 'if/else' statements but it seems more than that to me. Please help me out if you have any clue. Thanks

    Read the article

  • Incorrect data when passing pointer a list of pointers to a function. (C++)

    - by Phil Elm
    I'm writing code for combining data received over multiple sources. When the objects received (I'll call them MyPacket for now), they are stored in a standard list. However, whenever I reference the payload size of a partial MyPacket, the value shows up as 1 instead of the intended size. Here's the function code: MyPacket* CombinePackets(std::list<MyPacket*>* packets, uint8* current_packet){ uint32 total_payload_size = 0; if(packets->size() <= 0) return NULL; //For now. std::list<MyPacket*>::iterator it = packets->begin(); //Some minor code here, not relevant to the problem. for(uint8 index = 0; index < packets->size(); index++){ //(*it)->GetPayloadSize() returns 1 when it should show 1024. I've tried directly accessing the variable and more, but I just can't get it to work. total_payload_size += (*it)->GetPayloadSize(); cout << "Adding to total payload size value: " << (*it)->GetPayloadSize() << endl; std::advance(it,1); } MyPacket* packet = new MyPacket(); //Byte is just a typedef'd unsigned char. packet->payload = (byte) calloc(total_payload_size, sizeof(byte)); packet->payload_size = total_payload_size; it = packets->begin(); //Go back to the beginning again. uint32 big_payload_index = 0; for(uint8 index = 0; index < packets->size(); index++){ if(current_packet != NULL) *current_packet = index; for(uint32 payload_index = 0; payload_index < (*it)->GetPayloadSize(); payload_index++){ packet->payload[big_payload_index] = (*it)->payload[payload_index]; big_payload_index++; } std::advance(it,1); } return packet; } //Calling code std::list<MyPacket*> received = std::list<MyPacket*>(); //The code that fills it is here. std::list<MyPacket*>::iterator it = received.begin(); cout << (*it)->GetPayloadSize() << endl; // Outputs 1024 correctly! MyPacket* final = CombinePackets(&received,NULL); cout << final->GetPayloadSize() << endl; //Outputs 181, which happens to be the number of elements in the received list. So, as you can see above, when I reference (*it)-GetPayloadSize(), it returns 1 instead of the intended 1024. Can anyone see the problem and if so, do you have an idea on how to fix this? I've spent 4 hours searching and trying new solutions, but they all keep returning 1... EDIT:

    Read the article

  • Wrong figures numbering - Package caption Error: Continued 'figure' after 'table'

    - by Eduardo
    Hello I am having a problem with the numbering of figures using Latex, I am getting this error message: Package caption Error: Continued 'figure' after 'table' This is my code: \begin{table} \centering \subfloat[Tabla1\label{tab:Tabla1}]{ \small \begin{tabular}{ | c | c | c | c | c |} \hline \multicolumn{5}{|c|}{\textbf{Tabla 1}} \\ \hline ... ... \end{tabular} } \qquad \subfloat[Tabla2\label{tab:Tabla2}]{ \small \begin{tabular}{ | c | c | c | c | c |} \hline \multicolumn{5}{|c|}{\textbf{Tabla 2}} \\ \hline ... ... \end{tabular} } \caption{These are tables} \label{tab:Tables} \end{table} \begin{figure} \centering \subfloat[][Figure 1]{\label{fig:fig1}\includegraphics[width = 14cm]{fig1}} \qquad \subfloat[][Figure 2]{\label{fig:fig2}\includegraphics[width = 14cm]{fig2}} \end{figure} \begin{figure}[t] \ContinuedFloat \subfloat[][Figure 2]{\label{fig:fig3}\includegraphics[width = 14cm]{fig3}} \caption{Those are figures} \label{fig:Figures} \end{figure} \newpage What I want to do, it is to have this configuration: Table Table Figure 1 Figure 2 Figure 3 Since Figure 1 and Figure 2 are too big to fit vertically I want the Figure 3 to be alone in another page that's why I have the \ContinuedFloat. Externally looks fine but the problem is the numbering, I am getting for the Figures the number 5.2, that is the same number that a Figure I have before (The correct number should be 5.3). However if I try to reference the figures: \ref{fig:fig1}, \ref{fig:fig2} y \ref{fig:fig2} I get: 5.3a, 5.3b y 5.2c The two first right the last one wrong. I have been stuck with this for hours any ideas?. Thans a lot in advance

    Read the article

  • Binding TabControl ItemsSource to an ObservableCollection causes content to refresh on focus

    - by Brent
    I'm creating an WPF application using the MVVM framework, and I've adopted several features from Josh Smith's article on MVVM here... Most importantly, I'm binding a TabControl to an ObservableCollection of ViewModels. This means that am using a tabbed MDI interface that displays a UserControl as the content of a TabItem. The issue I'm seeing in my application is that when I have several tabs and I flip back and forth between tabs, the content is being refersh each time I change tabs. If you download Josh Smith's source code, you'll see that his app has the same problem. For example, click on the "View All Customers" button and scroll down to the bottom the ListView. Next click on the "Create New Customer" button. When you switch back to the All Customer view you'll notice that the ListView scrolls back to the top. If you switch back to the New Customer tab and place your cursor in one of the TextBoxes, then switch to All Customers tab and back, you'll notice that the cursor is now gone. I imagine that this is because I'm using an ObservableCollection, but I can't be sure. Is there any way to prevent the tab's content from refreshing when it receives the focus?

    Read the article

  • UINavigationController inside tabbar loading a child root view

    - by Doug
    Hi guys, Firstly i'll preface by saying that i am a complete Cocoa touch/objective c noob (.Net dev having a dabble) I have searched on Google as well as here but cannot seem to find an easy solution. I have a UItabbarcontroller view with a UINavigationController inside its first tab I have the root view for this UINavigationController stored in a seperate class and NIB as i am trying to seperate the data viewing from the data loading (i'm going to reuse the table list in multiple places in my database) and simply pass the root view its data using a loading method and have it take it from there. What i want to happen: App loads and loads the first view of the tab bar (A UINavigationController) The UINavigationController inside the first view loads a root view (a UIViewController with a table view) and sets its title The UINavigationController loads the data from a web service and parses it The UINavigationController sends the data to a loading method inside the UIViewController Am i thinking about this completely wrongly? What currently happens: the first tab bar loads with an empty uinavigationcontroller (no table view) the data methods fire and get the webservice data this child view gets sent its data using the loading method the tableview delegate events fail to fire inside the child view telling it to load the data into the table I just can't seem how to load my second view inside the root view of the navigation controller and then send it my data?

    Read the article

  • Connecting to a Ghost User in Flex RTMFP

    - by Dan
    I have a simple Flex RTMFP P2P video app in the same mold as the Adobe Cirrus VideoPhone Sample application. A problem I've been encountering in developing this app (the same problem occurs in the sample) is when you try to connect to a ghost Stratus instance i.e you try to call someone whose Stratus id is in the database but who is no longer on the page. So here's an example of what I mean: Let's say you go to the Adobe Stratus sample and connect as Dan. Then open up a new tab, go to the sample again and connect as Fred. If from this point, you (as Fred) call Dan everything will work fine. But, if you close the tab in which you connected as Dan, and then from the Fred tab try to connect to Dan the program will just hang. I would have thought there would be a NetStream event that would be triggered if you tried to connect to a Stratus instance that is not longer online but I can't seem to find anything besides NetStream.Connect.Rejected which doesn't seem to be called. Any help is much appreciated!

    Read the article

  • Can't get Secondary UITableViewController to display inside a UITabBarController

    - by Paul Johnston
    I've programmatically created a UITabBarController that is loaded in my App Delegate like this: - (void)applicationDidFinishLaunching:(UIApplication *)application { tabBarController = [[UITabBarController alloc] init]; myTableViewController = [[MyTableViewController alloc] init]; UINavigationController *tableNavController = [[[UINavigationController alloc] initWithRootViewController:myTableViewController] autorelease]; myTableViewController.title = @"Tab 1"; [myTableViewController release]; mySecondTableViewController = [[MySecondTableViewController alloc] init]; UINavigationController *table2NavController = [[[UINavigationController alloc] initWithRootViewController:mySecondTableViewController] autorelease]; mySecondTableViewController.title = @"Tab 2"; [mySecondTableViewController release]; tabBarController.viewControllers = [NSArray arrayWithObjects:tableNavController, table2NavController, nil]; [window addSubview:tabBarController.view]; [window makeKeyAndVisible]; } Now the issue I have is that I can get into the views no problem, but when I try and click onto any item in the Table View, I can't get a secondary table view to appear in any tab. The tabs work absolutely fine, just the secondary views. I'm using the code below in my myTableViewController to run when selecting a specific row (the code reaches the HELP line, and crashes)... - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { NSUInteger row = [indexPath row]; // this gets the correct view controller from a list of controllers SecondaryViewController *svc = [self.controllers objectAtIndex:row]; /*** HELP NEEDED WITH THIS LINE ***/ [self.navigationController pushViewController:svc animated:YES]; } Simply put, I'm trying to switch views to the new view controller whilst keeping the tabs available and using the navigation to go back and forth (like in the iTunes App). Any help appreciated. Thanks

    Read the article

  • Help with route rewrite in asp.net mvc

    - by NachoF
    Im having a really hard time understanding routing. Please help me with this problem. Each of my controllers have these three actions right now Users have Index, Create and Edit Locations have Index, Create and Edit Companies have Index, Create and Edit The thing is, it all gets done through ajax. I have jquery ui tabs with two tabs for each, Create and Edit So the Index method is always the one that gets called for action links. and inside this main view is that you can call(by clicking on the tab icon) the other methods that return an ajax view that gets output into the jqeury tab (I hope thats clear) I have a sidebar with links to the controllers. and to specific methods of these controllers. The wanted behavior is that it should actually go into the Index Method and then with some logic autoload the wanted tab. It all works just fine right now. But my urls are horrible. To get to the create method for Users I have to go this url http://localhost/Users/Index/1 http://localhost/Users/Index/2 I want the behavior of these links to be remapped to these links http://localhost/Users/Create http://localhost/Users/Edit So even though it seems as if you are calling the Create method of the controller you are actualling always calling the Index Method.... (I know how to transform Create into "1" and Edit into two, so dont worry about that part Hope thats clear. Thanks in advance Edit: Just realized that this might not be possible cause then when I actually need to call the methods (with ajax) it wont know what to do.... am I correct?

    Read the article

  • Strange VS2005 compile errors: unable to locate resource file (because the compiler keeps deleting i

    - by Velika
    I AM GETTING THE FOLLOWING ERROR IN A VERY SIMPLE CLASS LIBRARY: Error 1 Unable to copy file "obj\Debug\SMIT.SysAdmin.BusinessLayer.Resources.resources" to "obj\Debug\SMIT.SysAdmin.BusinessLayer.SMIT.SysAdmin.BusinessLayer.Resources.resources". Could not find file 'obj\Debug\SMIT.SysAdmin.BusinessLayer.Resources.resources'. SMIT.SysAdmin.BusinessLayer Going to the Project Properties-Resource tab, I see that I defined do resources. Still, I tried to delete the resource file and recreate by going to the resource tab. When I recompile, I still get the same error. Why is it even looking for a resource file? I define no resources on teh project properties tab and added no new resource file items. Any suggestions of things to try? Update: I found the missing file in an old backup. I copied it to the location where the compiler expected it, and then successfully recompiled the project that previously had compile time errors. However, when I rebuild the entire solution, it deletes the file that I previously restored and I'm back to where I started. My solution contains several projects (maybe 10 or so). Could VS 2005 be having a problem determining dependencies and the proper order to compile these projects?

    Read the article

  • View Controller's viewDidLoad method finishing before applicationDidFinishLaunching

    - by mwt
    I'm creating a fairly complex iPhone app using Core Data. Up until now, things have been working fine. As the app has been getting more complex, however, a new problem has come up: the first view controller is finishing its viewDidLoad method before the AppDelegate gets even halfway through its applicationDidFinishLaunching method. The view controller is not the root, which is a tab bar controller. The VC in question is the one for the default selected tab on the tab bar. It's getting instantiated by IB. Nothing like this has occurred before in my experience, and it's throwing off the important initialization I'm doing in the AppDelegate (getting objects from Core Data and preparing them for use) . Furthermore, it's intermittent -- sometimes the delegate does finish first. Has anyone else noticed a difficulty like this? Any sample code that deals with such an issue? I suppose that the answer is to make the VC load the data that the AppDelegate is getting ready only when the AppDelegate sends a message that it's ready. I'm a bit concerned that this is adding something that will just end up biting me in the butt later on.

    Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >