computer case - Page 225

can we write this in C++ switch ?

- by jellly

#include <iostream> using namespace std; int main(){ char i; cin >>i; switch (i){ case ('e'||'i'||'o'||'u'||'a'): cout<<"Vowel"; break; case ('+'||'-'||'/'||'*'||'%'): cout<<"Op"; break; } return 0; } if not than how can we use comparison or logical operators in switch ? & why cant we declare and initialize variable in single case without using scope ?

Read the article

How to check whether a String fully matches a Regex in Scala?

- by mkneissl

Assume I have a Regex pattern I want to match many Strings to. val Digit = """\d""".r I just want to check whether a given String fully matches the Regex. What is a good and idiomatic way to do this in Scala? I know that I can pattern match on Regexes, but this is syntactically not very pleasing in this case, because I have no groups to extract: scala> "5" match { case Digit() => true case _ => false } res4: Boolean = true Or I could fall back to the underlying Java pattern: scala> Digit.pattern.matcher("5").matches res6: Boolean = true which is not elegant, either. Is there a better solution?

Read the article

absolute audio synchronization

- by user1780526

I would like to synchronize my computer with an external camcorder recording so that I can know exactly (to the millisecond) when certain recored events happen with respect to other sensors logged by the computer. One idea is to playback short sound pulses or chirps every second from the computer that get picked up by the microphone on the camcorder. But the accuracy of a simple cron job playing a sound clip is not precise enough. I was thinking of using something like gstreamer, but how does one get it to playback a clip at precisely a certain time according to the system clock?

Read the article

Erlang: simple refactoring

- by alexey

Consider the code: f(command1, UserId) -> case is_registered(UserId) of true -> %% do command1 ok; false -> not_registered end; f(command2, UserId) -> case is_registered(UserId) of true -> %% do command2 ok; false -> not_registered end. is_registered(UserId) -> %% some checks Now imagine that there are a lot of commands and they are all call is_registered at first. Is there any way to generalize this behavior (refactor this code)? I mean that it's not a good idea to place the same case in all the commands.

Read the article

Mistake in dispaly and insert method (double - ended queue)

- by MANAL

1) My problem when i make remove from right or left program will be remove true but when i call diplay method the content wrong like this I insert 12 43 65 23 and when make remove from left program will remove 12 but when call display method show like this 12 43 65 and when make remove from right program will remove 23 but when call display method show like this 12 43 Why ?????? ); and when i try to make insert after remove write this Can not insert right because the queue is full . first remove right and then u can insert right where is the problem ?? Please Help me please 2) My code FIRST CLASS class dqueue { private int fullsize; //number of all cells private int item_num; // number of busy cells only private int front,rear; public int j; private double [] dqarr; //========================================== public dqueue(int s) //constructor { fullsize = s; front = 0; rear = -1; item_num = 0; dqarr = new double[fullsize]; } //========================================== public void insert(double data) { if (rear == fullsize-1) rear = -1; rear++; dqarr[rear] = data; item_num++; } public double removeLeft() // take item from front of queue { double temp = dqarr[front++]; // get value and incr front if(front == fullsize) front = 0; item_num --; // one less item return temp; } public double removeRight() // take item from rear of queue { double temp = dqarr[rear--]; // get value and decr rear if(rear == -1) // rear = item_num -1; item_num --; // one less item return temp; } //========================================= public void display () //display items { for (int j=0;j //========================================= public int size() //number of items in queue { return item_num; } //========================================== public boolean isEmpty() // true if queue is empty { return (item_num ==0); } } SECOND CLASS import java.util.Scanner; class dqueuetest { public static void main(String[] args) { Scanner input = new Scanner(System.in); System.out.println(" Welcome here** "); System.out.println(" * Mind Of Programming Group*** "); System.out.println(" _________________________ "); System.out.println("enter size of your dqueue"); int size = input.nextInt(); dqueue mydq = new dqueue(size); System.out.println(""); System.out.println("enter your itemes"); //===================================== for(int i = 0;i<=size-1;i++) { System.out.printf("item %d:",i+1); double item = input.nextDouble(); mydq.insert(item); System.out.println(""); } //===================================== int queue =size ; int c = 0 ; while (c != 6) { System.out.println(""); System.out.println("**************************"); System.out.println(" MAIN MENUE"); System.out.println("1- INSERT RIGHT "); System.out.println("2- REMOVE LEFT"); System.out.println("3- REMOVE RIGHT"); System.out.println("4- DISPLAY"); System.out.println("5- SIZE"); System.out.println("6- EXIT"); System.out.println("**************************"); System.out.println("choose your operation by number(1-6)"); c = input.nextInt(); switch (c) { case 1: if (queue == size) System.out.print("Can not insert right because the queue is full . first remove right and then u can insert right "); else { System.out.print("enter your item: "); double item = input.nextDouble(); mydq.insert(item);} break; case 2: System.out.println("REMOVE FROM REAR :"); if( !mydq.isEmpty() ) { double item = mydq.removeLeft(); System.out.print(item + "\t"); } // end while System.out.println(""); mydq.display(); break; case 3: System.out.println("REMOVE FROM FRONT :"); if( !mydq.isEmpty() ) { double item = mydq.removeRight(); System.out.print(item + "\t"); } // end while System.out.println(""); mydq.display(); break; case 4: System.out.println("The items in Queue are :"); mydq.display(); break; case 5: System.out.println("The Size of the Queue is :"+mydq.size()); break; case 6: System.out.println("Good Bye"); break; default: System.out.println("wrong chiose enter again"); } //end switch } //end while } // end main }//end class

Read the article

Occasional conversion error using SUM function

- by user153777

My app uses sql2000 and a select statement it uses will sometimes fail. Once a week or so the select returns the error 'Error Converting data type varchar to numeric' SQL: sum(case when ISNULL(form_prsn_id, -1) = irpd_prsn_id then convert(dec(11,2), case when valu_value = '' then '0' else isnull (valu_value,'0') end)* case when fmdt_deduction_flag = 'Y' then -1 else 1 end else 0 end) as client_sum The valu_value field is a varchar and stores some numeric and some varchar. But including my join and where clause filter it will always select numeric or empty string. When it is failing I can remove the SUM, see the data and know that its numeric. So why would the SUM function sometimes (say 5% of time) fail on data that is numeric. I wonder if SQL somehow "looks ahead" to ensure it could convert to decimal on more than just the rows returned without the sum. Note I have discovered a fix where I include ( where isNumeric(valu_value) = 1 ) Thanks

Read the article

Efficient job progress update in web application

- by Endru6

Hi, Creating a web application (Django in my case, but I think the question is more general) that is administrating a cluster of workers doing queued jobs, there is a need to track each jobs progress. When I've done it using database UPDATE (PostgreSQL in this case), it severely hits the database performance, because each UPDATE creates a new row in a table, and in my case only vacuuming DB removes obsolete rows. Having 30 jobs running and reporting progress every 1 minute DB may require vacuuming (and it means huge slow downs on a front end side for all the employees working with the system) every 10 days. Because the progress information isn't critical, ie. it doesn't have to be persistent, how would you do the progress updates from jobs without using an overhead database implies? There are 30 worker servers, each doing 1 or 2 jobs simultaneously, 1 front end server which serves a web application to users, and 1 database server.

Read the article

Get machine name from Active Directory

- by Stephen Murby

I have performed an "LDAP://" query to get a list of computers within a specified OU, my issue is not being able to collect just the computer "name" or even "cn". DirectoryEntry toShutdown = new DirectoryEntry("LDAP://" + comboBox1.Text.ToString()); DirectorySearcher machineSearch = new DirectorySearcher(toShutdown); //machineSearch.Filter = "(objectCatergory=computer)"; machineSearch.Filter = "(objectClass=computer)"; machineSearch.SearchScope = SearchScope.Subtree; machineSearch.PropertiesToLoad.Add("name"); SearchResultCollection allMachinesCollected = machineSearch.FindAll(); Methods myMethods = new Methods(); string pcName; foreach (SearchResult oneMachine in allMachinesCollected) { //pcName = oneMachine.Properties.PropertyNames.ToString(); pcName = oneMachine.Properties["name"].ToString(); MessageBox.Show(pcName); } Help much appreciated.

Read the article

How to combine Option values in Scala?

- by Jeff

Hi! I want to be able to apply an operation f: (T,T) => T to two Option[T] values in Scala. I want the result to be None if any of the two values is None. More specifically, I want to know if is there a shorter way to do the following: def opt_apply[T](f: (T,T) => T, x: Option[T], y: Option[T]): Option[T] = { (x,y) match { case (Some(u),Some(v)) => Some(f(u,v)) case _ => None } } I have tryied (x zip y) map {case (u,v) => f(u,v)} but the result is an Iterator[T] not an Option[T]. Any help will be appreciated. Thanks.

Read the article

Using regular expressions with Dojo data.fetch?

- by Dfowj

I'm trying to use the below code to fetch a regular expression like this /[computer]{3,8}/(what i think is any words containing the letters in computer ranging from 3 to 8 letters long) from a database (which i know is being loaded correctly). When i fetch, i get 10 results, all the same word... "Adenauer" var base = "computer"; var baseRE = '/[' + base + ']{' + this.minLength + ',' + base.length + '}/'; this.dict.fetch({query: {word:baseRE}, onComplete: onLoadWords, onError: function(err) { console.log(err); }}); Any ideas what im doing wrong?

Read the article

Abort early in a fold

- by Heptic

What's the best way to terminate a fold early? As a simplified example, imagine I want to sum up the numbers in an Iterable, but if I encounter something I'm not expecting (say an odd number) I might want to terminate. This is a first approximation def sumEvenNumbers(nums: Iterable[Int]): Option[Int] = { nums.foldLeft (Some(0): Option[Int]) { case (None, _) => None case (Some(s), n) if n % 2 == 0 => Some(s + n) case (Some(_), _) => None } } However, this solution is pretty ugly (as in, if I did a .foreach and a return -- it'd be much cleaner and clearer) and worst of all, it traverses the entire iterable even if it encounters a non-even number. So what would be the best way to write a fold like this, that terminates early? Should I just go and write this recursively, or is there a more accepted way?

Read the article

Optimal strategy to make a C++ hash table, thread safe

- by Ajeet

(I am interested in design of implementation NOT a readymade construct that will do it all.) Suppose we have a class HashTable (not hash-map implemented as a tree but hash-table) and say there are eight threads. Suppose read to write ratio is about 100:1 or even better 1000:1. Case A) Only one thread is a writer and others including writer can read from HashTable(they may simply iterate over entire hash table) Case B) All threads are identical and all could read/write. Can someone suggest best strategy to make the class thread safe with following consideration 1. Top priority to least lock contention 2. Second priority to least number of locks My understanding so far is thus : One BIG reader-writer lock(semaphore). Specialize the semaphore so that there could be eight instances writer-resource for case B, where each each writer resource locks one row(or range for that matter). (so i guess 1+8 mutexes) Please let me know if I am thinking on the correct line, and how could we improve on this solution.

Read the article

Help with my application please! Can’t open image(s) with error: External component has thrown an ex

- by Brandon

I have an application written in C# I believe and it adds images to a SQL Server 2005 Database. It requires .NET 3.5 to be installed on my computer. I installed .NET 3.5 and setup a database. It runs fine but then once it gets to image 100 when running on one computer, It stops and gives me this error: Can't open image(s) with error: External component has thrown an exception.... When I run the program on my own computer I am able to reach 300 images but then it stops after 300 images and gives me Can't open image(s) with error: External component has thrown an exception.... error once again. please help!

Read the article

javascript regular expressions

- by Zhasulan Berdybekov

Help me with regular expressions. I need to check the text on the hour and minute. That is the first case, the text can be from 0 to 12. In the second case, the text can be from 1 to 60. this is my code: var hourRegEx = /^([0-9]{2})$/; //You can fix this line of code? $(document).ready( function(){ $('form.form').submit(function(){ if( $('input.hour').val().match(hourRegEx) ){ return true; } return false; }); }); In my case, the code says that, for example 52, too, the correct answer

Read the article

Beginner's Language app

- by Eiseldora

Hi I'm a techie with no programing experience. I know html and css, but I'd like to someday be able to make an app for my phone (I have an android) and possibly mobile websites. I made learning a programing language and creating a mobile app a goal for my job, and now my boss would like me to pick a programing language to learn. I found a free open course from MIT (http://ocw.mit.edu/courses/electrical-engineering-and-computer-science/6-00-introduction-to-computer-science-and-programming-fall-2008/) called introduction to computer science. In the course they teach python, but more importantly it seems they teach how to think like a programmer. When I told my boss about the free online course she didn't think that Python was an appropriate language for me to learn. She'd like me to learn a language that is more similar to one used to make Phone apps. Does anyone out there know a better language for me to pick up that would be similar to Android or iPhone's App language. Thank you

Read the article

how do I refactor this to make single function calls?

- by stack.user.1

I've been using this for a while updating mysql as needed. However I'm not too sure on the syntax..and need to migrate the sql to an array. Particulary the line database::query("CREATE TABLE $name($query)"); Does this translate to CREATE TABLE bookmark(name VARCHAR(64), url VARCHAR(256), tag VARCHAR(256), id INT) This is my ...guess. Is this correct? class table extends database { private function create($name, $query) { database::query("CREATE TABLE $name($query)"); } public function make($type) { switch ($type) { case "credentials": self::create('credentials', 'id INT NOT NULL AUTO_INCREMENT, flname VARCHAR(60), email VARCHAR(32), pass VARCHAR(40), PRIMARY KEY(id)'); break; case "booomark": self::create('boomark', 'name VARCHAR(64), url VARCHAR(256), tag VARCHAR(256), id INT'); break; case "tweet": self::create('tweet', 'time INT, fname VARCHAR(32), message VARCHAR(128), email VARCHAR(64)'); break; default: throw new Exception('Invalid Table Type'); } } }

Read the article

how to recieve mail using python>

- by user600950

Hey everyone, I am trying to make a program on my computer at home that will constantly check a certain gmail address. The purpose being the only email this adress recieves is from me. I would just like to be able to 1.Check for mail 2.Download mail(presumably to a string, though a file is acceptable) and 3. delete the mail from the web server but keep it on my computer. Thta is all i need to know right now, however my long term goal is to set up kind of a remote terminal over email, so that wherever i have email i have a certain amount of control over my computer.

Read the article

fatal error C1014: too many include files : depth = 1024

- by numerical25

I have no idea what this means. But here is the code that it supposely is happening in. //======================================================================================= // d3dApp.cpp by Frank Luna (C) 2008 All Rights Reserved. //======================================================================================= #include "d3dApp.h" #include <stream> LRESULT CALLBACK MainWndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam) { static D3DApp* app = 0; switch( msg ) { case WM_CREATE: { // Get the 'this' pointer we passed to CreateWindow via the lpParam parameter. CREATESTRUCT* cs = (CREATESTRUCT*)lParam; app = (D3DApp*)cs->lpCreateParams; return 0; } } // Don't start processing messages until after WM_CREATE. if( app ) return app->msgProc(msg, wParam, lParam); else return DefWindowProc(hwnd, msg, wParam, lParam); } D3DApp::D3DApp(HINSTANCE hInstance) { mhAppInst = hInstance; mhMainWnd = 0; mAppPaused = false; mMinimized = false; mMaximized = false; mResizing = false; mFrameStats = L""; md3dDevice = 0; mSwapChain = 0; mDepthStencilBuffer = 0; mRenderTargetView = 0; mDepthStencilView = 0; mFont = 0; mMainWndCaption = L"D3D10 Application"; md3dDriverType = D3D10_DRIVER_TYPE_HARDWARE; mClearColor = D3DXCOLOR(0.0f, 0.0f, 1.0f, 1.0f); mClientWidth = 800; mClientHeight = 600; } D3DApp::~D3DApp() { ReleaseCOM(mRenderTargetView); ReleaseCOM(mDepthStencilView); ReleaseCOM(mSwapChain); ReleaseCOM(mDepthStencilBuffer); ReleaseCOM(md3dDevice); ReleaseCOM(mFont); } HINSTANCE D3DApp::getAppInst() { return mhAppInst; } HWND D3DApp::getMainWnd() { return mhMainWnd; } int D3DApp::run() { MSG msg = {0}; mTimer.reset(); while(msg.message != WM_QUIT) { // If there are Window messages then process them. if(PeekMessage( &msg, 0, 0, 0, PM_REMOVE )) { TranslateMessage( &msg ); DispatchMessage( &msg ); } // Otherwise, do animation/game stuff. else { mTimer.tick(); if( !mAppPaused ) updateScene(mTimer.getDeltaTime()); else Sleep(50); drawScene(); } } return (int)msg.wParam; } void D3DApp::initApp() { initMainWindow(); initDirect3D(); D3DX10_FONT_DESC fontDesc; fontDesc.Height = 24; fontDesc.Width = 0; fontDesc.Weight = 0; fontDesc.MipLevels = 1; fontDesc.Italic = false; fontDesc.CharSet = DEFAULT_CHARSET; fontDesc.OutputPrecision = OUT_DEFAULT_PRECIS; fontDesc.Quality = DEFAULT_QUALITY; fontDesc.PitchAndFamily = DEFAULT_PITCH | FF_DONTCARE; wcscpy(fontDesc.FaceName, L"Times New Roman"); D3DX10CreateFontIndirect(md3dDevice, &fontDesc, &mFont); } void D3DApp::onResize() { // Release the old views, as they hold references to the buffers we // will be destroying. Also release the old depth/stencil buffer. ReleaseCOM(mRenderTargetView); ReleaseCOM(mDepthStencilView); ReleaseCOM(mDepthStencilBuffer); // Resize the swap chain and recreate the render target view. HR(mSwapChain->ResizeBuffers(1, mClientWidth, mClientHeight, DXGI_FORMAT_R8G8B8A8_UNORM, 0)); ID3D10Texture2D* backBuffer; HR(mSwapChain->GetBuffer(0, __uuidof(ID3D10Texture2D), reinterpret_cast<void**>(&backBuffer))); HR(md3dDevice->CreateRenderTargetView(backBuffer, 0, &mRenderTargetView)); ReleaseCOM(backBuffer); // Create the depth/stencil buffer and view. D3D10_TEXTURE2D_DESC depthStencilDesc; depthStencilDesc.Width = mClientWidth; depthStencilDesc.Height = mClientHeight; depthStencilDesc.MipLevels = 1; depthStencilDesc.ArraySize = 1; depthStencilDesc.Format = DXGI_FORMAT_D24_UNORM_S8_UINT; depthStencilDesc.SampleDesc.Count = 1; // multisampling must match depthStencilDesc.SampleDesc.Quality = 0; // swap chain values. depthStencilDesc.Usage = D3D10_USAGE_DEFAULT; depthStencilDesc.BindFlags = D3D10_BIND_DEPTH_STENCIL; depthStencilDesc.CPUAccessFlags = 0; depthStencilDesc.MiscFlags = 0; HR(md3dDevice->CreateTexture2D(&depthStencilDesc, 0, &mDepthStencilBuffer)); HR(md3dDevice->CreateDepthStencilView(mDepthStencilBuffer, 0, &mDepthStencilView)); // Bind the render target view and depth/stencil view to the pipeline. md3dDevice->OMSetRenderTargets(1, &mRenderTargetView, mDepthStencilView); // Set the viewport transform. D3D10_VIEWPORT vp; vp.TopLeftX = 0; vp.TopLeftY = 0; vp.Width = mClientWidth; vp.Height = mClientHeight; vp.MinDepth = 0.0f; vp.MaxDepth = 1.0f; md3dDevice->RSSetViewports(1, &vp); } void D3DApp::updateScene(float dt) { // Code computes the average frames per second, and also the // average time it takes to render one frame. static int frameCnt = 0; static float t_base = 0.0f; frameCnt++; // Compute averages over one second period. if( (mTimer.getGameTime() - t_base) >= 1.0f ) { float fps = (float)frameCnt; // fps = frameCnt / 1 float mspf = 1000.0f / fps; std::wostringstream outs; outs.precision(6); outs << L"FPS: " << fps << L"\n" << "Milliseconds: Per Frame: " << mspf; mFrameStats = outs.str(); // Reset for next average. frameCnt = 0; t_base += 1.0f; } } void D3DApp::drawScene() { md3dDevice->ClearRenderTargetView(mRenderTargetView, mClearColor); md3dDevice->ClearDepthStencilView(mDepthStencilView, D3D10_CLEAR_DEPTH|D3D10_CLEAR_STENCIL, 1.0f, 0); } LRESULT D3DApp::msgProc(UINT msg, WPARAM wParam, LPARAM lParam) { switch( msg ) { // WM_ACTIVATE is sent when the window is activated or deactivated. // We pause the game when the window is deactivated and unpause it // when it becomes active. case WM_ACTIVATE: if( LOWORD(wParam) == WA_INACTIVE ) { mAppPaused = true; mTimer.stop(); } else { mAppPaused = false; mTimer.start(); } return 0; // WM_SIZE is sent when the user resizes the window. case WM_SIZE: // Save the new client area dimensions. mClientWidth = LOWORD(lParam); mClientHeight = HIWORD(lParam); if( md3dDevice ) { if( wParam == SIZE_MINIMIZED ) { mAppPaused = true; mMinimized = true; mMaximized = false; } else if( wParam == SIZE_MAXIMIZED ) { mAppPaused = false; mMinimized = false; mMaximized = true; onResize(); } else if( wParam == SIZE_RESTORED ) { // Restoring from minimized state? if( mMinimized ) { mAppPaused = false; mMinimized = false; onResize(); } // Restoring from maximized state? else if( mMaximized ) { mAppPaused = false; mMaximized = false; onResize(); } else if( mResizing ) { // If user is dragging the resize bars, we do not resize // the buffers here because as the user continuously // drags the resize bars, a stream of WM_SIZE messages are // sent to the window, and it would be pointless (and slow) // to resize for each WM_SIZE message received from dragging // the resize bars. So instead, we reset after the user is // done resizing the window and releases the resize bars, which // sends a WM_EXITSIZEMOVE message. } else // API call such as SetWindowPos or mSwapChain->SetFullscreenState. { onResize(); } } } return 0; // WM_EXITSIZEMOVE is sent when the user grabs the resize bars. case WM_ENTERSIZEMOVE: mAppPaused = true; mResizing = true; mTimer.stop(); return 0; // WM_EXITSIZEMOVE is sent when the user releases the resize bars. // Here we reset everything based on the new window dimensions. case WM_EXITSIZEMOVE: mAppPaused = false; mResizing = false; mTimer.start(); onResize(); return 0; // WM_DESTROY is sent when the window is being destroyed. case WM_DESTROY: PostQuitMessage(0); return 0; // The WM_MENUCHAR message is sent when a menu is active and the user presses // a key that does not correspond to any mnemonic or accelerator key. case WM_MENUCHAR: // Don't beep when we alt-enter. return MAKELRESULT(0, MNC_CLOSE); // Catch this message so to prevent the window from becoming too small. case WM_GETMINMAXINFO: ((MINMAXINFO*)lParam)->ptMinTrackSize.x = 200; ((MINMAXINFO*)lParam)->ptMinTrackSize.y = 200; return 0; } return DefWindowProc(mhMainWnd, msg, wParam, lParam); } void D3DApp::initMainWindow() { WNDCLASS wc; wc.style = CS_HREDRAW | CS_VREDRAW; wc.lpfnWndProc = MainWndProc; wc.cbClsExtra = 0; wc.cbWndExtra = 0; wc.hInstance = mhAppInst; wc.hIcon = LoadIcon(0, IDI_APPLICATION); wc.hCursor = LoadCursor(0, IDC_ARROW); wc.hbrBackground = (HBRUSH)GetStockObject(NULL_BRUSH); wc.lpszMenuName = 0; wc.lpszClassName = L"D3DWndClassName"; if( !RegisterClass(&wc) ) { MessageBox(0, L"RegisterClass FAILED", 0, 0); PostQuitMessage(0); } // Compute window rectangle dimensions based on requested client area dimensions. RECT R = { 0, 0, mClientWidth, mClientHeight }; AdjustWindowRect(&R, WS_OVERLAPPEDWINDOW, false); int width = R.right - R.left; int height = R.bottom - R.top; mhMainWnd = CreateWindow(L"D3DWndClassName", mMainWndCaption.c_str(), WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, width, height, 0, 0, mhAppInst, this); if( !mhMainWnd ) { MessageBox(0, L"CreateWindow FAILED", 0, 0); PostQuitMessage(0); } ShowWindow(mhMainWnd, SW_SHOW); UpdateWindow(mhMainWnd); } void D3DApp::initDirect3D() { // Fill out a DXGI_SWAP_CHAIN_DESC to describe our swap chain. DXGI_SWAP_CHAIN_DESC sd; sd.BufferDesc.Width = mClientWidth; sd.BufferDesc.Height = mClientHeight; sd.BufferDesc.RefreshRate.Numerator = 60; sd.BufferDesc.RefreshRate.Denominator = 1; sd.BufferDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; sd.BufferDesc.ScanlineOrdering = DXGI_MODE_SCANLINE_ORDER_UNSPECIFIED; sd.BufferDesc.Scaling = DXGI_MODE_SCALING_UNSPECIFIED; // No multisampling. sd.SampleDesc.Count = 1; sd.SampleDesc.Quality = 0; sd.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; sd.BufferCount = 1; sd.OutputWindow = mhMainWnd; sd.Windowed = true; sd.SwapEffect = DXGI_SWAP_EFFECT_DISCARD; sd.Flags = 0; // Create the device. UINT createDeviceFlags = 0; #if defined(DEBUG) || defined(_DEBUG) createDeviceFlags |= D3D10_CREATE_DEVICE_DEBUG; #endif HR( D3D10CreateDeviceAndSwapChain( 0, //default adapter md3dDriverType, 0, // no software device createDeviceFlags, D3D10_SDK_VERSION, &sd, &mSwapChain, &md3dDevice) ); // The remaining steps that need to be carried out for d3d creation // also need to be executed every time the window is resized. So // just call the onResize method here to avoid code duplication. onResize(); }

Read the article

Blank Mail from PHP application

- by brettlwilliams

Problem: Blank email from PHP web application. Confirmed: App works in Linux, has various problems in Windows server environment. Blank emails are the last remaining problem. PHP Version 5.2.6 on the server I'm a librarian implementing a PHP based web application to help students complete their assignments.I have installed this application before on a Linux based free web host and had no problems. Email is controlled by two files, email_functions.php and email.php. While email can be sent, all that is sent is a blank email. My IT department is an ASP only shop, so I can get little to no help there. I also cannot install additional libraries like PHPmail or Swiftmailer. You can see a functional copy at http://rpc.elm4you.org/ You can also download a copy from Sourceforge from the link there. Thanks in advance for any insight into this! email_functions.php <?php /********************************************************** Function: build_multipart_headers Author: Michael Berkowski Last Modified: September 2007 *********************************************************** Purpose: Creates email headers for a message of type multipart/mime This will include a plain text part and HTML. **********************************************************/ function build_multipart_headers($boundary_rand) { global $EMAIL_FROM_DISPLAY_NAME, $EMAIL_FROM_ADDRESS, $CALC_PATH, $CALC_TITLE, $SERVER_NAME; // Using \n instead of \r\n because qmail doubles up the \r and screws everything up! $crlf = "\n"; $message_date = date("r"); // Construct headers for multipart/mixed MIME email. It will have a plain text and HTML part $headers = "X-Calc-Name: $CALC_TITLE" . $crlf; $headers .= "X-Calc-Url: http://{$SERVER_NAME}/{$CALC_PATH}" . $crlf; $headers .= "MIME-Version: 1.0" . $crlf; $headers .= "Content-type: multipart/alternative;" . $crlf; $headers .= " boundary=__$boundary_rand" . $crlf; $headers .= "From: $EMAIL_FROM_DISPLAY_NAME <$EMAIL_FROM_ADDRESS>" . $crlf; $headers .= "Sender: $EMAIL_FROM_DISPLAY_NAME <$EMAIL_FROM_ADDRESS>" . $crlf; $headers .= "Reply-to: $EMAIL_FROM_DISPLAY_NAME <$EMAIL_FROM_ADDRESS>" . $crlf; $headers .= "Return-Path: $EMAIL_FROM_DISPLAY_NAME <$EMAIL_FROM_ADDRESS>" . $crlf; $headers .= "Date: $message_date" . $crlf; $headers .= "Message-Id: $boundary_rand@$SERVER_NAME" . $crlf; return $headers; } /********************************************************** Function: build_multipart_body Author: Michael Berkowski Last Modified: September 2007 *********************************************************** Purpose: Builds the email body content to go with the headers from build_multipart_headers() **********************************************************/ function build_multipart_body($plain_text_message, $html_message, $boundary_rand) { //$crlf = "\r\n"; $crlf = "\n"; $boundary = "__" . $boundary_rand; // Begin constructing the MIME multipart message $multipart_message = "This is a multipart message in MIME format." . $crlf . $crlf; $multipart_message .= "--{$boundary}{$crlf}Content-type: text/plain; charset=\"us-ascii\"{$crlf}Content-Transfer-Encoding: 7bit{$crlf}{$crlf}"; $multipart_message .= $plain_text_message . $crlf . $crlf; $multipart_message .= "--{$boundary}{$crlf}Content-type: text/html; charset=\"iso-8859-1\"{$crlf}Content-Transfer-Encoding: 7bit{$crlf}{$crlf}"; $multipart_message .= $html_message . $crlf . $crlf; $multipart_message .= "--{$boundary}--$crlf$crlf"; return $multipart_message; } /********************************************************** Function: build_step_email_body_text Author: Michael Berkowski Last Modified: September 2007 *********************************************************** Purpose: Returns a plain text version of the email body to be used for individually sent step reminders **********************************************************/ function build_step_email_body_text($stepnum, $arr_instructions, $dates, $query_string, $teacher_info ,$name, $class, $project_id) { global $CALC_PATH, $CALC_TITLE, $SERVER_NAME; $step_email_body =<<<BODY $CALC_TITLE Step $stepnum: {$arr_instructions["step$stepnum"]["title"]} Name: $name Class: $class BODY; $step_email_body .= build_text_single_step($stepnum, $arr_instructions, $dates, $query_string, $teacher_info); $step_email_body .= "\n\n"; $step_email_body .=<<<FOOTER The $CALC_TITLE offers suggestions, but be sure to check with your teacher to find out the best working schedule for your assignment! If you would like to stop receiving further reminders for this project, click the link below: http://$SERVER_NAME/$CALC_PATH/deleteproject.php?proj=$project_id FOOTER; // Wrap text to 78 chars per line // Convert any remaining HTML <br /> to \r\n // Strip out any remaining HTML tags. $step_email_body = strip_tags(linebreaks_html2text(wordwrap($step_email_body, 78, "\n"))); return $step_email_body; } /********************************************************** Function: build_step_email_body_html Author: Michael Berkowski Last Modified: September 2007 *********************************************************** Purpose: Same as above, but with HTML **********************************************************/ function build_step_email_body_html($stepnum, $arr_instructions, $dates, $query_string, $teacher_info, $name, $class, $project_id) { global $CALC_PATH, $CALC_TITLE, $SERVER_NAME; $styles = build_html_styles(); $step_email_body =<<<BODY <html> <head> <title> $CALC_TITLE </title> $styles </head> <body> <h1> $CALC_TITLE Schedule </h1> <strong>Name:</strong> $name <br /> <strong>Class:</strong> $class <br /> BODY; $step_email_body .= build_html_single_step($stepnum, $arr_instructions, $dates, $query_string, $teacher_info); $step_email_body .=<<<FOOTER <p> The $CALC_TITLE offers suggestions, but be sure to check with your teacher to find out the best working schedule for your assignment! </p> <p> If you would like to stop receiving further reminders for this project, <a href="http://{$SERVER_NAME}/$CALC_PATH/deleteproject.php?proj=$project_id">click this link.</a> </p> </body> </html> FOOTER; return $step_email_body; } /********************************************************** Function: build_html_styles Author: Michael Berkowski Last Modified: September 2007 *********************************************************** Purpose: Just returns a string of <style /> for the HTML message body **********************************************************/ function build_html_styles() { $styles =<<<STYLES <style type="text/css"> body { font-family: Arial, sans-serif; font-size: 85%; } h1 { font-size: 120%; } table { border: none; } tr { vertical-align: top; } img { display: none; } hr { border: 0; } </style> STYLES; return $styles; } /********************************************************** Function: linebreaks_html2text Author: Michael Berkowski Last Modified: October 2007 *********************************************************** Purpose: Convert <br /> html tags to \n line breaks **********************************************************/ function linebreaks_html2text($in_string) { $out_string = ""; $arr_br = array("<br>", "<br />", "<br/>"); $out_string = str_replace($arr_br, "\n", $in_string); return $out_string; } ?> email.php <?php require_once("include/config.php"); require_once("include/instructions.php"); require_once("dbase/dbfunctions.php"); require_once("include/email_functions.php"); ini_set("sendmail_from", "[email protected]"); ini_set("SMTP", "mail.qatar.net.qa"); // Verify that the email has not already been sent by checking for a cookie // whose value is generated each time the form is loaded freshly. if (!(isset($_COOKIE['rpc_transid']) && $_COOKIE['rpc_transid'] == $_POST['transid'])) { // Setup some preliminary variables for email. // The scanning of $_POST['email']already took place when this file was included... $to = $_POST['email']; $subject = $EMAIL_SUBJECT; $boundary_rand = md5(rand()); $mail_type = ""; switch ($_POST['reminder-type']) { case "progressive": $arr_dbase_dates = array(); $conn = rpc_connect(); if (!$conn) { $mail_success = FALSE; $mail_status_message = "Could not register address!"; break; } // Sanitize all the data that will be inserted into table... // We need to remove "CONTENT-TYPE:" from name/class to defang them. // Additionall, we can't allow any line-breaks in those fields to avoid // hacks to email headers. $ins_name = mysql_real_escape_string($name); $ins_name = eregi_replace("CONTENT-TYPE", "...Content_Type...", $ins_name); $ins_name = str_replace("\n", "", $ins_name); $ins_class = mysql_real_escape_string($class); $ins_class = eregi_replace("CONTENT-TYPE", "...Content_Type...", $ins_class); $ins_class = str_replace("\n", "", $ins_class); $ins_email = mysql_real_escape_string($email); $ins_teacher_info = $teacher_info ? "YES" : "NO"; switch ($format) { case "Slides": $ins_format = "SLIDES"; break; case "Video": $ins_format = "VIDEO"; break; case "Essay": default: $ins_format = "ESSAY"; break; } // The transid from the previous form will be used as a project identifier // Steps will be grouped by project identifier. $ins_project_id = mysql_real_escape_string($_POST['transid'] . md5(rand())); $arr_dbase_dates = dbase_dates($dates); $arr_past_dates = array(); // Iterate over the dates array and build a SQL statement for each one. $insert_success = TRUE; // $min_reminder_date = date("Ymd", mktime(0,0,0,date("m"),date("d")+$EMAIL_REMINDER_DAYS_AHEAD,date("Y"))); for ($date_index = 0; $date_index < sizeof($arr_dbase_dates); $date_index++) { // Make sure we're using the right keys... $ins_date_index = $date_index + 1; // The insert will only happen if the date of the event is in the future. // For dates today and earlier, no insert. // For dates today or after the reminder deadline, we'll send the email immediately after the inserts. if ($arr_dbase_dates[$date_index] > (int)$min_reminder_date) { $qry =<<<QRY INSERT INTO email_queue ( NOTIFICATION_ID, PROJECT_ID, EMAIL, NAME, CLASS, FORMAT, TEACHER_INFO, STEP, MESSAGE_DATE ) VALUES ( NULL, '$ins_project_id', '$ins_email', '$ins_name', '$ins_class', '$ins_format', '$ins_teacher_info', $ins_date_index, /*step number*/ {$arr_dbase_dates[$date_index]} /* Date in the integer format yyyymmdd */ ) QRY; // Attempt to do the insert... $result = mysql_query($qry); // If even one insert fails, bail out. if (!$result) { $mail_success = FALSE; $mail_status_message = "Could not register address!"; break; } } // For dates today or earlier, store the steps=>dates in an array so the mails can // be sent immediately. else { $arr_past_dates[$ins_date_index] = $arr_dbase_dates[$date_index]; } } // Close the connection resources. mysql_close($conn); // SEND OUT THE EMAILS THAT HAVE TO GO IMMEDIATELY... // This should only be step 1, but who knows... //var_dump($arr_past_dates); for ($stepnum=1; $stepnum<=sizeof($arr_past_dates); $stepnum++) { $email_teacher_info = ($teacher_info && $EMAIL_TEACHER_REMINDERS) ? TRUE : FALSE; $boundary = md5(rand()); $plain_text_body = build_step_email_body_text($stepnum, $arr_instructions, $dates, $query_string, $email_teacher_info ,$name, $class, $ins_project_id); $html_body = build_step_email_body_html($stepnum, $arr_instructions, $dates, $query_string, $email_teacher_info ,$name, $class, $ins_project_id); $multipart_headers = build_multipart_headers($boundary); $multipart_body = build_multipart_body($plain_text_body, $html_body, $boundary); mail($to, $subject . ": Step " . $stepnum, $multipart_body, $multipart_headers, "[email protected]"); } // Set appropriate flags and messages $mail_success = TRUE; $mail_status_message = "Email address registered!"; $mail_type = "progressive"; set_mail_success_cookie(); break; // Default to a single email message. case "single": default: // We don't want to send images in the message, so strip them out of the existing structure. // This big ugly regex strips the whole table cell containing the image out of the table. // Must find a better solution... //$email_table_html = eregi_replace("<td class=\"stepImageContainer\" width=\"161px\">[\s\r\n\t]*<img class=\"stepImage\" src=\"images/[_a-zA-Z0-9]*\.gif\" alt=\"Step [1-9]{1} logo\" />[\s\r\n\t]*</td>", "\n", $table_html); // Show more descriptive text based on the value of $format switch ($format) { case "Video": $format_display = "Video"; break; case "Slides": $format_display = "Presentation with electronic slides"; break; case "Essay": default: $format_display = "Essay"; break; } $days = (int)$days; $html_message = ""; $styles = build_html_styles(); $html_message =<<<HTMLMESSAGE <html> <head> <title> $CALC_TITLE </title> $styles </head> <body> <h1> $CALC_TITLE Schedule </h1> <strong>Name:</strong> $name <br /> <strong>Class:</strong> $class <br /> <strong>Email:</strong> $email <br /> <strong>Assignment type:</strong> $format_display <br /><br /> <strong>Starting on:</strong> $date1 <br /> <strong>Assignment due:</strong> $date2 <br /> <strong>You have $days days to finish.</strong><br /> <hr /> $email_table_html </body> </html> HTMLMESSAGE; // Create the plain text version of the message... $plain_text_message = strip_tags(linebreaks_html2text(build_text_all_steps($arr_instructions, $dates, $query_string, $teacher_info))); // Add the title, since it doesn't get built in by build_text_all_steps... $plain_text_message = $CALC_TITLE . " Schedule\n\n" . $plain_text_message; $plain_text_message = wordwrap($plain_text_message, 78, "\n"); $multipart_headers = build_multipart_headers($boundary_rand); $multipart_message = build_multipart_body($plain_text_message, $html_message, $boundary_rand); $mail_success = FALSE; if (mail($to, $subject, $multipart_message, $multipart_headers, "[email protected]")) { $mail_success = TRUE; $mail_status_message = "Email sent!"; $mail_type = "single"; set_mail_success_cookie(); } else { $mail_success = FALSE; $mail_status_message = "Could not send email!"; } break; } } function set_mail_success_cookie() { // Prevent the mail from being resent on page reload. Set a timestamp cookie. // Expires in 24 hours. setcookie("rpc_transid", $_POST['transid'], time() + 86400); } ?>

Read the article

How to compile a C++ source code written for Linux/Unix on Windows Vista (code given)

- by HTMZ

I have a c++ source code that was written in linux/unix environment by some other author. It gives me errors when i compile it in windows vista environment. I am using Bloodshed Dev C++ v 4.9. please help. #include <iostream.h> #include <map> #include <vector> #include <string> #include <string.h> #include <strstream> #include <unistd.h> #include <stdlib.h> using namespace std; template <class T> class PrefixSpan { private: vector < vector <T> > transaction; vector < pair <T, unsigned int> > pattern; unsigned int minsup; unsigned int minpat; unsigned int maxpat; bool all; bool where; string delimiter; bool verbose; ostream *os; void report (vector <pair <unsigned int, int> > &projected) { if (minpat > pattern.size()) return; // print where & pattern if (where) { *os << "<pattern>" << endl; // what: if (all) { *os << "<freq>" << pattern[pattern.size()-1].second << "</freq>" << endl; *os << "<what>"; for (unsigned int i = 0; i < pattern.size(); i++) *os << (i ? " " : "") << pattern[i].first; } else { *os << "<what>"; for (unsigned int i = 0; i < pattern.size(); i++) *os << (i ? " " : "") << pattern[i].first << delimiter << pattern[i].second; } *os << "</what>" << endl; // where *os << "<where>"; for (unsigned int i = 0; i < projected.size(); i++) *os << (i ? " " : "") << projected[i].first; *os << "</where>" << endl; *os << "</pattern>" << endl; } else { // print found pattern only if (all) { *os << pattern[pattern.size()-1].second; for (unsigned int i = 0; i < pattern.size(); i++) *os << " " << pattern[i].first; } else { for (unsigned int i = 0; i < pattern.size(); i++) *os << (i ? " " : "") << pattern[i].first << delimiter << pattern[i].second; } *os << endl; } } void project (vector <pair <unsigned int, int> > &projected) { if (all) report(projected); map <T, vector <pair <unsigned int, int> > > counter; for (unsigned int i = 0; i < projected.size(); i++) { int pos = projected[i].second; unsigned int id = projected[i].first; unsigned int size = transaction[id].size(); map <T, int> tmp; for (unsigned int j = pos + 1; j < size; j++) { T item = transaction[id][j]; if (tmp.find (item) == tmp.end()) tmp[item] = j ; } for (map <T, int>::iterator k = tmp.begin(); k != tmp.end(); ++k) counter[k->first].push_back (make_pair <unsigned int, int> (id, k->second)); } for (map <T, vector <pair <unsigned int, int> > >::iterator l = counter.begin (); l != counter.end (); ) { if (l->second.size() < minsup) { map <T, vector <pair <unsigned int, int> > >::iterator tmp = l; tmp = l; ++tmp; counter.erase (l); l = tmp; } else { ++l; } } if (! all && counter.size () == 0) { report (projected); return; } for (map <T, vector <pair <unsigned int, int> > >::iterator l = counter.begin (); l != counter.end(); ++l) { if (pattern.size () < maxpat) { pattern.push_back (make_pair <T, unsigned int> (l->first, l->second.size())); project (l->second); pattern.erase (pattern.end()); } } } public: PrefixSpan (unsigned int _minsup = 1, unsigned int _minpat = 1, unsigned int _maxpat = 0xffffffff, bool _all = false, bool _where = false, string _delimiter = "/", bool _verbose = false): minsup(_minsup), minpat (_minpat), maxpat (_maxpat), all(_all), where(_where), delimiter (_delimiter), verbose (_verbose) {}; ~PrefixSpan () {}; istream& read (istream &is) { string line; vector <T> tmp; T item; while (getline (is, line)) { tmp.clear (); istrstream istrs ((char *)line.c_str()); while (istrs >> item) tmp.push_back (item); transaction.push_back (tmp); } return is; } ostream& run (ostream &_os) { os = &_os; if (verbose) *os << transaction.size() << endl; vector <pair <unsigned int, int> > root; for (unsigned int i = 0; i < transaction.size(); i++) root.push_back (make_pair (i, -1)); project (root); return *os; } void clear () { transaction.clear (); pattern.clear (); } }; int main (int argc, char **argv) { extern char *optarg; unsigned int minsup = 1; unsigned int minpat = 1; unsigned int maxpat = 0xffffffff; bool all = false; bool where = false; string delimiter = "/"; bool verbose = false; string type = "string"; int opt; while ((opt = getopt(argc, argv, "awvt:M:m:L:d:")) != -1) { switch(opt) { case 'a': all = true; break; case 'w': where = true; break; case 'v': verbose = true; break; case 'm': minsup = atoi (optarg); break; case 'M': minpat = atoi (optarg); break; case 'L': maxpat = atoi (optarg); break; case 't': type = string (optarg); break; case 'd': delimiter = string (optarg); break; default: cout << "Usage: " << argv[0] << " [-m minsup] [-M minpat] [-L maxpat] [-a] [-w] [-v] [-t type] [-d delimiter] < data .." << endl; return -1; } } if (type == "int") { PrefixSpan<unsigned int> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); }else if (type == "short") { PrefixSpan<unsigned short> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); } else if (type == "char") { PrefixSpan<unsigned char> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); } else if (type == "string") { PrefixSpan<string> prefixspan (minsup, minpat, maxpat, all, where, delimiter, verbose); prefixspan.read (cin); prefixspan.run (cout); } else { cerr << "Unknown Item Type: " << type << " : choose from [string|int|short|char]" << endl; return -1; } return 0; }

Read the article

file doesn't open, running outside of debugger results in seg fault (c++)

- by misterich

Hello (and thanks in advance) I'm in a bit of a quandry, I cant seem to figure out why I'm seg faulting. A couple of notes: It's for a course -- and sadly I am required to use use C-strings instead of std::string. Please dont fix my code (I wont learn that way and I will keep bugging you). please just point out the flaws in my logic and suggest a different function/way. platform: gcc version 4.4.1 on Suse Linux 11.2 (2.6.31 kernel) Here's the code main.cpp: // /////////////////////////////////////////////////////////////////////////////////// // INCLUDES (C/C++ Std Library) #include <cstdlib> /// EXIT_SUCCESS, EXIT_FAILURE #include <iostream> /// cin, cout, ifstream #include <cassert> /// assert // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (custom header files) #include "dict.h" /// Header for the dictionary class // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR CONSTANTS #define ENTER '\n' /// Used to accept new lines, quit program. #define SPACE ' ' /// One way to end the program // /////////////////////////////////////////////////////////////////////////////////// // CUSTOM DATA TYPES /// File Namespace -- keep it local namespace { /// Possible program prompts to display for the user. enum FNS_Prompts { fileName_, /// prints out the name of the file noFile_, /// no file was passed to the program tooMany_, /// more than one file was passed to the program noMemory_, /// Not enough memory to use the program usage_, /// how to use the program word_, /// ask the user to define a word. notFound_, /// the word is not in the dictionary done_, /// the program is closing normally }; } // /////////////////////////////////////////////////////////////////////////////////// // Namespace using namespace std; /// Nothing special in the way of namespaces // /////////////////////////////////////////////////////////////////////////////////// // FUNCTIONS /** prompt() prompts the user to do something, uses enum Prompts for parameter. */ void prompt(FNS_Prompts msg /** determines the prompt to use*/) { switch(msg) { case fileName_ : { cout << ENTER << ENTER << "The file name is: "; break; } case noFile_ : { cout << ENTER << ENTER << "...Sorry, a dictionary file is needed. Try again." << endl; break; } case tooMany_ : { cout << ENTER << ENTER << "...Sorry, you can only specify one dictionary file. Try again." << endl; break; } case noMemory_ : { cout << ENTER << ENTER << "...Sorry, there isn't enough memory available to run this program." << endl; break; } case usage_ : { cout << "USAGE:" << endl << " lookup.exe [dictionary file name]" << endl << endl; break; } case done_ : { cout << ENTER << ENTER << "like Master P says, \"Word.\"" << ENTER << endl; break; } case word_ : { cout << ENTER << ENTER << "Enter a word in the dictionary to get it's definition." << ENTER << "Enter \"?\" to get a sorted list of all words in the dictionary." << ENTER << "... Press the Enter key to quit the program: "; break; } case notFound_ : { cout << ENTER << ENTER << "...Sorry, that word is not in the dictionary." << endl; break; } default : { cout << ENTER << ENTER << "something passed an invalid enum to prompt(). " << endl; assert(false); /// something passed in an invalid enum } } } /** useDictionary() uses the dictionary created by createDictionary * - prompts user to lookup a word * - ends when the user enters an empty word */ void useDictionary(Dictionary &d) { char *userEntry = new char; /// user's input on the command line if( !userEntry ) // check the pointer to the heap { cout << ENTER << MEM_ERR_MSG << endl; exit(EXIT_FAILURE); } do { prompt(word_); // test code cout << endl << "----------------------------------------" << endl << "Enter something: "; cin.getline(userEntry, INPUT_LINE_MAX_LEN, ENTER); cout << ENTER << userEntry << endl; }while ( userEntry[0] != NIL && userEntry[0] != SPACE ); // GARBAGE COLLECTION delete[] userEntry; } /** Program Entry * Reads in the required, single file from the command prompt. * - If there is no file, state such and error out. * - If there is more than one file, state such and error out. * - If there is a single file: * - Create the database object * - Populate the database object * - Prompt the user for entry * main() will return EXIT_SUCCESS upon termination. */ int main(int argc, /// the number of files being passed into the program char *argv[] /// pointer to the filename being passed into tthe program ) { // EXECUTE /* Testing code * / char tempFile[INPUT_LINE_MAX_LEN] = {NIL}; cout << "enter filename: "; cin.getline(tempFile, INPUT_LINE_MAX_LEN, '\n'); */ // uncomment after successful debugging if(argc <= 1) { prompt(noFile_); prompt(usage_); return EXIT_FAILURE; /// no file was passed to the program } else if(argc > 2) { prompt(tooMany_); prompt(usage_); return EXIT_FAILURE; /// more than one file was passed to the program } else { prompt(fileName_); cout << argv[1]; // print out name of dictionary file if( !argv[1] ) { prompt(noFile_); prompt(usage_); return EXIT_FAILURE; /// file does not exist } /* file.open( argv[1] ); // open file numEntries >> in.getline(file); // determine number of dictionary objects to create file.close(); // close file Dictionary[ numEntries ](argv[1]); // create the dictionary object */ // TEMPORARY FILE FOR TESTING!!!! //Dictionary scrabble(tempFile); Dictionary scrabble(argv[1]); // creaate the dicitonary object //*/ useDictionary(scrabble); // prompt the user, use the dictionary } // exit return EXIT_SUCCESS; /// terminate program. } Dict.h/.cpp #ifndef DICT_H #define DICT_H // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (Custom header files) #include "entry.h" /// class for dictionary entries // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR MACROS #define INPUT_LINE_MAX_LEN 256 /// Maximum length of each line in the dictionary file class Dictionary { public : // // Do NOT modify the public section of this class // typedef void (*WordDefFunc)(const char *word, const char *definition); Dictionary( const char *filename ); ~Dictionary(); const char *lookupDefinition( const char *word ); void forEach( WordDefFunc func ); private : // // You get to provide the private members // // VARIABLES int m_numEntries; /// stores the number of entries in the dictionary Entry *m_DictEntry_ptr; /// points to an array of class Entry // Private Functions }; #endif ----------------------------------- // /////////////////////////////////////////////////////////////////////////////////// // INCLUDES (C/C++ Std Library) #include <iostream> /// cout, getline #include <fstream> // ifstream #include <cstring> /// strchr // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (custom header files) #include "dict.h" /// Header file required by assignment //#include "entry.h" /// Dicitonary Entry Class // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR MACROS #define COMMA ',' /// Delimiter for file #define ENTER '\n' /// Carriage return character #define FILE_ERR_MSG "The data file could not be opened. Program will now terminate." #pragma warning(disable : 4996) /// turn off MS compiler warning about strcpy() // /////////////////////////////////////////////////////////////////////////////////// // Namespace reference using namespace std; // /////////////////////////////////////////////////////////////////////////////////// // PRIVATE MEMBER FUNCTIONS /** * Sorts the dictionary entries. */ /* static void sortDictionary(?) { // sort through the words using qsort } */ /** NO LONGER NEEDED?? * parses out the length of the first cell in a delimited cell * / int getWordLength(char *str /// string of data to parse ) { return strcspn(str, COMMA); } */ // /////////////////////////////////////////////////////////////////////////////////// // PUBLIC MEMBER FUNCTIONS /** constructor for the class * - opens/reads in file * - creates initializes the array of member vars * - creates pointers to entry objects * - stores pointers to entry objects in member var * - ? sort now or later? */ Dictionary::Dictionary( const char *filename ) { // Create a filestream, open the file to be read in ifstream dataFile(filename, ios::in ); /* if( dataFile.fail() ) { cout << FILE_ERR_MSG << endl; exit(EXIT_FAILURE); } */ if( dataFile.is_open() ) { // read first line of data // TEST CODE in.getline(dataFile, INPUT_LINE_MAX_LEN) >> m_numEntries; // TEST CODE char temp[INPUT_LINE_MAX_LEN] = {NIL}; // TEST CODE dataFile.getline(temp,INPUT_LINE_MAX_LEN,'\n'); dataFile >> m_numEntries; /** Number of terms in the dictionary file * \todo find out how many lines in the file, subtract one, ingore first line */ //create the array of entries m_DictEntry_ptr = new Entry[m_numEntries]; // check for valid memory allocation if( !m_DictEntry_ptr ) { cout << MEM_ERR_MSG << endl; exit(EXIT_FAILURE); } // loop thru each line of the file, parsing words/def's and populating entry objects for(int EntryIdx = 0; EntryIdx < m_numEntries; ++EntryIdx) { // VARIABLES char *tempW_ptr; /// points to a temporary word char *tempD_ptr; /// points to a temporary def char *w_ptr; /// points to the word in the Entry object char *d_ptr; /// points to the definition in the Entry int tempWLen; /// length of the temp word string int tempDLen; /// length of the temp def string char tempLine[INPUT_LINE_MAX_LEN] = {NIL}; /// stores a single line from the file // EXECUTE // getline(dataFile, tempLine) // get a "word,def" line from the file dataFile.getline(tempLine, INPUT_LINE_MAX_LEN); // get a "word,def" line from the file // Parse the string tempW_ptr = tempLine; // point the temp word pointer at the first char in the line tempD_ptr = strchr(tempLine, COMMA); // point the def pointer at the comma *tempD_ptr = NIL; // replace the comma with a NIL ++tempD_ptr; // increment the temp def pointer // find the string lengths... +1 to account for terminator tempWLen = strlen(tempW_ptr) + 1; tempDLen = strlen(tempD_ptr) + 1; // Allocate heap memory for the term and defnition w_ptr = new char[ tempWLen ]; d_ptr = new char[ tempDLen ]; // check memory allocation if( !w_ptr && !d_ptr ) { cout << MEM_ERR_MSG << endl; exit(EXIT_FAILURE); } // copy the temp word, def into the newly allocated memory and terminate the strings strcpy(w_ptr,tempW_ptr); w_ptr[tempWLen] = NIL; strcpy(d_ptr,tempD_ptr); d_ptr[tempDLen] = NIL; // set the pointers for the entry objects m_DictEntry_ptr[ EntryIdx ].setWordPtr(w_ptr); m_DictEntry_ptr[ EntryIdx ].setDefPtr(d_ptr); } // close the file dataFile.close(); } else { cout << ENTER << FILE_ERR_MSG << endl; exit(EXIT_FAILURE); } } /** * cleans up dynamic memory */ Dictionary::~Dictionary() { delete[] m_DictEntry_ptr; /// thou shalt not have memory leaks. } /** * Looks up definition */ /* const char *lookupDefinition( const char *word ) { // print out the word ---- definition } */ /** * prints out the entire dictionary in sorted order */ /* void forEach( WordDefFunc func ) { // to sort before or now.... that is the question } */ Entry.h/cpp #ifndef ENTRY_H #define ENTRY_H // /////////////////////////////////////////////////////////////////////////////////// // INCLUDES (C++ Std lib) #include <cstdlib> /// EXIT_SUCCESS, NULL // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR MACROS #define NIL '\0' /// C-String terminator #define MEM_ERR_MSG "Memory allocation has failed. Program will now terminate." // /////////////////////////////////////////////////////////////////////////////////// // CLASS DEFINITION class Entry { public: Entry(void) : m_word_ptr(NULL), m_def_ptr(NULL) { /* default constructor */ }; void setWordPtr(char *w_ptr); /// sets the pointer to the word - only if the pointer is empty void setDefPtr(char *d_ptr); /// sets the ponter to the definition - only if the pointer is empty /// returns what is pointed to by the word pointer char getWord(void) const { return *m_word_ptr; } /// returns what is pointed to by the definition pointer char getDef(void) const { return *m_def_ptr; } private: char *m_word_ptr; /** points to a dictionary word */ char *m_def_ptr; /** points to a dictionary definition */ }; #endif -------------------------------------------------- // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (custom header files) #include "entry.h" /// class header file // /////////////////////////////////////////////////////////////////////////////////// // PUBLIC FUNCTIONS /* * only change the word member var if it is in its initial state */ void Entry::setWordPtr(char *w_ptr) { if(m_word_ptr == NULL) { m_word_ptr = w_ptr; } } /* * only change the def member var if it is in its initial state */ void Entry::setDefPtr(char *d_ptr) { if(m_def_ptr == NULL) { m_word_ptr = d_ptr; } }

Read the article

How to create sprites, programatically without using prefabs?

- by DemonSOCKET

I have different types of images for different sprites. and i am not certain that how much different sprites(images) i will have to show. So, i gotta create the sprites and apply textures programatically at runtime. Now, I defiantly can't use prefabs because it will restrict me with the number of different sprites i can use. and also, changing texture on one sprite prefab instance in game, will change all the sprites prefab, that's not acceptable in my case. Is there a way i can create sprites without having to create static prefab ? where ever i looked for the solution every time i got the same answer "create a prefab", which is what can not be done in my case.

Read the article

Tools and Utilities for the .NET Developer

- by mbcrump

Tweet this list! Add a link to my site to your bookmarks to quickly find this page again! Add me to twitter! This is a list of the tools/utilities that I use to do my job/hobby. I wanted this page to load fast and contain information that only you care about. If I have missed a tool that you like, feel free to contact me and I will add it to the list. Also, this list took a lot of time to complete. Please do not steal my work, if you like the page then please link back to my site. I will keep the links/information updated as new tools/utilities are created. Windows/.NET Development – This is a list of tools that any Windows/.NET developer should have in his bag. I have used at some point in my career everything listed on this page and below is the tools worth keeping. Name Description License AnkhSVN Subversion support for Visual Studio. It also works with VS2010. Free Aurora XAML Designer One of the best XAML creation tools available. Has a ton of built in templates that you can copy/paste into VS2010. COST/Trial BeyondCompare Beyond Compare 3 is the ideal tool for comparing files and folders on your Windows or Linux system. Visualize changes in your code and carefully reconcile them. COST/Trial BuildIT Automated Task Tool Its main purpose is to automate tasks, whether it is the final packaging of a product, an automated daily build, maybe sending out a mailing list, even backing-up files. Free C Sharper for VB Convert VB to C#. COST CLRProfiler Analyze and improve the behavior of your .NET app. Free CodeRush Direct competitor to ReSharper, contains similar feature. This is one of those decide for yourself. COST/Trial Disk2VHD Disk2vhd is a utility that creates VHD (Virtual Hard Disk - Microsoft's Virtual Machine disk format) versions of physical disks for use in Microsoft Virtual PC or Microsoft Hyper-V virtual machines (VMs). Free Eazfuscator.NET Is a free obfuscator for .NET. The main purpose is to protect intellectual property of software. Free EQATEC Profiler Make your .NET app run faster. No source code changes are needed. Just point the profiler to your app, run the modified code, and get a visual report. COST Expression Studio 3/4 Comes with Web, Blend, Sketch Flow and more. You can create websites, produce beautiful XAML and more. COST/Trial Expresso The award-winning Expresso editor is equally suitable as a teaching tool for the beginning user of regular expressions or as a full-featured development environment for the experienced programmer or web designer with an extensive knowledge of regular expressions. Free Fiddler Fiddler is a web debugging proxy which logs all HTTP(s) traffic between your computer and the internet. Free Firebug Powerful Web development tool. If you build websites, you will need this. Free FxCop FxCop is an application that analyzes managed code assemblies (code that targets the .NET Framework common language runtime) and reports information about the assemblies, such as possible design, localization, performance, and security improvements. Free GAC Browser and Remover Easy way to remove multiple assemblies from the GAC. Assemblies registered by programs like Install Shield can also be removed. Free GAC Util The Global Assembly Cache tool allows you to view and manipulate the contents of the global assembly cache and download cache. Free HelpScribble Help Scribble is a full-featured, easy-to-use help authoring tool for creating help files from start to finish. You can create Win Help (.hlp) files, HTML Help (.chm) files, a printed manual and online documentation (on a web site) all from the same Help Scribble project. COST/Trial IETester IETester is a free Web Browser that allows you to have the rendering and JavaScript engines of IE9 preview, IE8, IE7 IE 6 and IE5.5 on Windows 7, Vista and XP, as well as the installed IE in the same process. Free iTextSharp iText# (iTextSharp) is a port of the iText open source java library for PDF generation written entirely in C# for the .NET platform. Use the iText mailing list to get support. Free Kaxaml Kaxaml is a lightweight XAML editor that gives you a "split view" so you can see both your XAML and your rendered content. Free LINQPad LinqPad lets you interactively query databases in a LINQ. Free Linquer Many programmers are familiar with SQL and will need a help in the transition to LINQ. Sometimes there are complicated queries to be written and Linqer can help by converting SQL scripts to LINQ. COST/Trial LiquidXML Liquid XML Studio 2010 is an advanced XML developers toolkit and IDE, containing all the tools needed for designing and developing XML schema and applications. COST/Trial Log4Net log4net is a tool to help the programmer output log statements to a variety of output targets. log4net is a port of the excellent log4j framework to the .NET runtime. We have kept the framework similar in spirit to the original log4j while taking advantage of new features in the .NET runtime. For more information on log4net see the features document. Free Microsoft Web Platform Installer The Microsoft Web Platform Installer 2.0 (Web PI) is a free tool that makes getting the latest components of the Microsoft Web Platform, including Internet Information Services (IIS), SQL Server Express, .NET Framework and Visual Web Developer easy. Free Mono Development Don't have Visual Studio - no problem! This is an open Source C# and .NET development environment for Linux, Windows, and Mac OS X Free Net Mass Downloader While it’s great that Microsoft has released the .NET Reference Source Code, you can only get it one file at a time while you’re debugging. If you’d like to batch download it for reading or to populate the cache, you’d have to write a program that instantiated and called each method in the Framework Class Library. Fortunately, .NET Mass Downloader comes to the rescue! Free nMap Nmap ("Network Mapper") is a free and open source (license) utility for network exploration or security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. Free NoScript (Firefox add-in) The NoScript Firefox extension provides extra protection for Firefox, Flock, Seamonkey and other Mozilla-based browsers: this free, open source add-on allows JavaScript, Java and Flash and other plug-ins to be executed only by trusted web sites of your choice (e.g. your online bank), and provides the most powerful Anti-XSS protection available in a browser. Free NotePad 2 Notepad2, a fast and light-weight Notepad-like text editor with syntax highlighting. This program can be run out of the box without installation, and does not touch your system's registry. Free PageSpy PageSpy is a small add-on for Internet Explorer that allows you to select any element within a webpage, select an option in the context menu, and view detailed information about both the coding behind the page and the element you selected. Free Phrase Express PhraseExpress manages your frequently used text snippets in customizable categories for quick access. Free PowerGui PowerGui is a free community for PowerGUI, a graphical user interface and script editor for Microsoft Windows PowerShell! Free Powershell Comes with Win7, but you can automate tasks by using the .NET Framework. Great for network admins. Free Process Explorer Ever wondered which program has a particular file or directory open? Now you can find out. Process Explorer shows you information about which handles and DLLs processes have opened or loaded. Also, included in the SysInterals Suite. Free Process Monitor Process Monitor is an advanced monitoring tool for Windows that shows real-time file system, Registry and process/thread activity. Free Reflector Explore and analyze compiled .NET assemblies, viewing them in C#, Visual Basic, and IL. This is an Essential for any .NET developer. Free Regular Expression Library Stuck on a Regular Expression but you think someone has already figured it out? Chances are they have. Free Regulator Regulator makes Regular Expressions easy. This is a must have for a .NET Developer. Free RenameMaestro RenameMaestro is probably the easiest batch file renamer you'll find to instantly rename multiple files COST ReSharper The one program that I cannot live without. Supports VS2010 and offers simple refactoring, code analysis/assistance/cleanup/templates. One of the few applications that is worth the $$$. COST/Trial ScrewTurn Wiki ScrewTurn Wiki allows you to create, manage and share wikis. A wiki is a collaboratively-edited, information-centered website: the most famous is Wikipedia. Free SharpDevelop What is #develop? SharpDevelop is a free IDE for C# and VB.NET projects on Microsoft's .NET platform. Free Show Me The Template Show Me The Template is a tool for exploring the templates, be their data, control or items panel, that comes with the controls built into WPF for all 6 themes. Free SnippetCompiler Compiles code snippets without opening Visual Studio. It does not support .NET 4. Free SQL Prompt SQL Prompt is a plug-in that increases how fast you can work with SQL. It provides code-completion for SQL server, reformatting, db schema information and snippets. Awesome! COST/Trial SQLinForm SQLinForm is an automatic SQL code formatter for all major databases including ORACLE, SQL Server, DB2, UDB, Sybase, Informix, PostgreSQL, Teradata, MySQL, MS Access etc. with over 70 formatting options. COST/OnlineFree SSMS Tools SSMS Tools Pack is an add-in for Microsoft SQL Server Management Studio (SSMS) including SSMS Express. Free Storm STORM is a free and open source tool for testing web services. Free Telerik Code Convertor Convert code from VB to C Sharp and Vice Versa. Free TurtoiseSVN TortoiseSVN is a really easy to use Revision control / version control / source control software for Windows.Since it's not an integration for a specific IDE you can use it with whatever development tools you like. Free UltraEdit UltraEdit is the ideal text, HTML and hex editor, and an advanced PHP, Perl, Java and JavaScript editor for programmers. UltraEdit is also an XML editor including a tree-style XML parser. An industry-award winner, UltraEdit supports disk-based 64-bit file handling (standard) on 32-bit Windows platforms (Windows 2000 and later). COST/Trial Virtual Windows XP Comes with some W7 version and allows you to run WinXP along side W7. Free VirtualBox Virtualization by Sun Microsystems. You can virtualize Windows, Linux and more. Free Visual Log Parser SQL queries against a variety of log files and other system data sources. Free WinMerge WinMerge is an Open Source differencing and merging tool for Windows. WinMerge can compare both folders and files, presenting differences in a visual text format that is easy to understand and handle. Free Wireshark Wireshark is one of the best network protocol analyzer's for Unix and windows. This has been used several times to get me out of a bind. Free XML Notepad 07 Old, but still one of my favorite XML viewers. Free Productivity Tools – This is the list of tools that I use to save time or quickly navigate around Windows. Name Description License AutoHotKey Automate almost anything by sending keystrokes and mouse clicks. You can write a mouse or keyboard macro by hand or use the macro recorder. Free CLCL CLCL is clipboard caching utility. Free Ditto Ditto is an extension to the standard windows clipboard. It saves each item placed on the clipboard allowing you access to any of those items at a later time. Ditto allows you to save any type of information that can be put on the clipboard, text, images, html, custom formats, ..... Free Evernote Remember everything from notes to photos. It will synch between computers/devices. Free InfoRapid Inforapid is a search tool that will display all you search results in a html like browser. If you click on a word in that browser, it will start another search to the word you clicked on. Handy if you want to trackback something to it's true origin. The word you looked for will be highlighted in red. Clicking on the red word will open the containing file in a text based viewer. Clicking on any word in the opened document will start another search on that word. Free KatMouse The prime purpose of the KatMouse utility is to enhance the functionality of mice with a scroll wheel, offering 'universal' scrolling: moving the mouse wheel will scroll the window directly beneath the mouse cursor (not the one with the keyboard focus, which is default on Windows OSes). This is a major increase in the usefulness of the mouse wheel. Free ScreenR Instant Screencast with nothing to download. Works with Mac or PC and free. Free Start++ Start++ is an enhancement for the Start Menu in Windows Vista. It also extends the Run box and the command-line with customizable commands. For example, typing "w Windows Vista" will take you to the Windows Vista page on Wikipedia! Free Synergy Synergy lets you easily share a single mouse and keyboard between multiple computers with different operating systems, each with its own display, without special hardware. It's intended for users with multiple computers on their desk since each system uses its own monitor(s). Free Texter Texter lets you define text substitution hot strings that, when triggered, will replace hotstring with a larger piece of text. By entering your most commonly-typed snippets of text into Texter, you can save countless keystrokes in the course of the day. Free Total Commander File handling, FTP, Archive handling and much more. Even works with Win3.11. COST/Trial Available Wizmouse WizMouse is a mouse enhancement utility that makes your mouse wheel work on the window currently under the mouse pointer, instead of the currently focused window. This means you no longer have to click on a window before being able to scroll it with the mouse wheel. This is a far more comfortable and practical way to make use of the mouse wheel. Free Xmarks Bookmark sync and search between computers. Free General Utilities – This is a list for power user users or anyone that wants more out of Windows. I usually install a majority of these whenever I get a new system. Name Description License µTorrent µTorrent is a lightweight and efficient BitTorrent client for Windows or Mac with many features. I use this for downloading LEGAL media. Free Audacity Audacity® is free, open source software for recording and editing sounds. It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems. Learn more about Audacity... Also check our Wiki and Forum for more information. Free AVast Free FREE Antivirus. Free CD Burner XP Pro CDBurnerXP is a free application to burn CDs and DVDs, including Blu-Ray and HD-DVDs. It also includes the feature to burn and create ISOs, as well as a multilanguage interface. Free CDEX You can extract digital audio CDs into mp3/wav. Free Combofix Combofix is a freeware (a legitimate spyware remover created by sUBs), Combofix was designed to scan a computer for known malware, spyware (SurfSideKick, QooLogic, and Look2Me as well as any other combination of the mentioned spyware applications) and remove them. Free Cpu-Z Provides information about some of the main devices of your system. Free Cropper Cropper is a screen capture utility written in C#. It makes it fast and easy to grab parts of your screen. Use it to easily crop out sections of vector graphic files such as Fireworks without having to flatten the files or open in a new editor. Use it to easily capture parts of a web site, including text and images. It's also great for writing documentation that needs images of your application or web site. Free DropBox Drag and Drop files to sync between computers. Free DVD-Fab Converts/Copies DVDs/Blu-Ray to different formats. (like mp4, mkv, avi) COST/Trial Available FastStone Capture FastStone Capture is a powerful, lightweight, yet full-featured screen capture tool that allows you to easily capture and annotate anything on the screen including windows, objects, menus, full screen, rectangular/freehand regions and even scrolling windows/web pages. Free ffdshow FFDShow is a DirectShow decoding filter for decompressing DivX, XviD, H.264, FLV1, WMV, MPEG-1 and MPEG-2, MPEG-4 movies. Free Filezilla FileZilla Client is a fast and reliable cross-platform FTP, FTPS and SFTP client with lots of useful features and an intuitive graphical user interface. You can also download a server version. Free FireFox Web Browser, do you really need an explanation? Free FireGestures A customizable mouse gestures extension which enables you to execute various commands and user scripts with five types of gestures. Free FoxIt Reader Light weight PDF viewer. You should install this with the advanced setting or it will install a toolbar and setup some shortcuts. Free gSynchIt Synch Gmail and Outlook. Even supports Outlook 2010 32/64 bit COST/Trial Available Hulu Desktop At home or in a hotel, this has replaced my cable/satellite subscription. Free ImgBurn ImgBurn is a lightweight CD / DVD / HD DVD / Blu-ray burning application that everyone should have in their toolkit! Free Infrarecorder InfraRecorder is a free CD/DVD burning solution for Microsoft Windows. It offers a wide range of powerful features; all through an easy to use application interface and Windows Explorer integration. Free KeePass KeePass is a free open source password manager, which helps you to manage your passwords in a secure way. Free LastPass Another password management, synchronize between browsers, automatic form filling and more. Free Live Essentials One download and lots of programs including Mail, Live Writer, Movie Maker and more! Free Monitores MonitorES is a small windows utility that helps you to turnoff monitor display when you lock down your machine.Also when you lock your machine, it will pause all your running media programs & set your IM status message to "Away" / Custom message(via options) and restore it back to normal when you back. Free mRemote mRemote is a full-featured, multi-tab remote connections manager. Free Open Office OpenOffice.org 3 is the leading open-source office software suite for word processing, spreadsheets, presentations, graphics, databases and more. It is available in many languages and works on all common computers. It stores all your data in an international open standard format and can also read and write files from other common office software packages. It can be downloaded and used completely free of charge for any purpose. Free Paint.NET Simple, intuitive, and innovative user interface for editing photos. Free Picasa Picasa is free photo editing software from Google that makes your pictures look great. Free Pidgin Pidgin is an easy to use and free chat client used by millions. Connect to AIM, MSN, Yahoo, and more chat networks all at once. Free PING PING is a live Linux ISO, based on the excellent Linux From Scratch (LFS) documentation. It can be burnt on a CD and booted, or integrated into a PXE / RIS environment. Free Putty PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. Free Revo Uninstaller Revo Uninstaller Pro helps you to uninstall software and remove unwanted programs installed on your computer easily! Even if you have problems uninstalling and cannot uninstall them from "Windows Add or Remove Programs" control panel applet.Revo Uninstaller is a much faster and more powerful alternative to "Windows Add or Remove Programs" applet! It has very powerful features to uninstall and remove programs. Free Security Essentials Microsoft Security Essentials is a new, free consumer anti-malware solution for your computer. Free SetupVirtualCloneDrive Virtual CloneDrive works and behaves just like a physical CD/DVD drive, however it exists only virtually. Point to the .ISO file and it appears in Windows Explorer as a Drive. Free Shark 007 Codec Pack Play just about any file format with this download. Also includes my W7 Media Playlist Generator. Free Snagit 9 Screen Capture on steroids. Add arrows, captions, etc to any screenshot. COST/Trial Available SysinternalsSuite Go ahead and download the entire sys internals suite. I have mentioned multiple programs in this suite already. Free TeraCopy TeraCopy is a compact program designed to copy and move files at the maximum possible speed, providing the user with a lot of features. Free for Home TrueCrypt Free open-source disk encryption software for Windows 7/Vista/XP, Mac OS X, and Linux Free TweetDeck Fully featured Twitter client. Free UltraVNC UltraVNC is a powerful, easy to use and free software that can display the screen of another computer (via internet or network) on your own screen. The program allows you to use your mouse and keyboard to control the other PC remotely. It means that you can work on a remote computer, as if you were sitting in front of it, right from your current location. Free Unlocker Unlocks locked files. Pretty simple right? Free VLC Media Player VLC media player is a highly portable multimedia player and multimedia framework capable of reading most audio and video formats Free Windows 7 Media Playlist This program is special to my heart because I wrote it. It has been mentioned on podcast and various websites. It allows you to quickly create wvx video playlist for Windows Media Center. Free WinRAR WinRAR is a powerful archive manager. It can backup your data and reduce the size of email attachments, decompress RAR, ZIP and other files downloaded from Internet and create new archives in RAR and ZIP file format. COST/Trial Available Blogging – I use the following for my blog. Name Description License Insert Code for Windows Live Writer Insert Code for Windows Live Writer will format a snippet of text in a number of programming languages such as C#, HTML, MSH, JavaScript, Visual Basic and TSQL. Free LiveWriter Included in Live Essentials, but the ultimate in Windows Blogging Free PasteAsVSCode Plug-in for Windows Live Writer that pastes clipboard content as Visual Studio code. Preserves syntax highlighting, indentation and background color. Converts RTF, outputted by Visual Studio, into HTML. Free Desktop Management – The list below represent the best in Windows Desktop Management. Name Description License 7 Stacks Allows users to have "stacks" of icons in their taskbar. Free Executor Executor is a multi purpose launcher and a more advanced and customizable version of windows run. Free Fences Fences is a program that helps you organize your desktop and can hide your icons when they are not in use. Free RocketDock Rocket Dock is a smoothly animated, alpha blended application launcher. It provides a nice clean interface to drop shortcuts on for easy access and organization. With each item completely customizable there is no end to what you can add and launch from the dock. Free WindowsTab Tabbing is an essential feature of modern web browsers. Window Tabs brings the productivity of tabbed window management to all of your desktop applications. Free

Read the article

SQL SERVER – Mirroring Configured Without Domain – The server network address TCP://SQLServerName:50

- by pinaldave

Regular readers of my blog will be aware of my friend who called me few days ago with very a funny SQL Problem SQL SERVER – SSMS Query Command(s) completed successfully without ANY Results. This time, it did not take long before he called me up with another interesting problem, although the issue he was facing this time was not that interesting and also very specific to him, however, he insisted me to share with all of you. Let us understand his situation at first. My friend is preparing for DBA exam Exam 70-450: PRO: Designing, Optimizing and Maintaining a Database Server Infrastructure using Microsoft SQL Server 2008 and for the same, he was trying to set up replication on his local laptop. He had installed two different instances of SQL Server on his computer and every time when he started the mirroring, it failed with common error message. The server network address “TCP://SQLServer:5023? cannot be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational. (Microsoft SQL Server, Error: 1418) Well, before he contacted me, he searched online and checked my article written on the error in mirroring. However, he tried all the four suggestions, but it did not solve his problem. He called me at a reasonable time of late evening (unlike last time, which was midnight!). I even tried all the seven different suggestions myself, as previously proposed in my article; however, none of them worked. While looking at closely at services, I noticed something very simple. He was running all the instances on ‘Network Services’. In fact, his computer was a stand-alone computer. There was no network at all. Also, there was no domain or any other advance network concepts implemented. I just changed services from ‘Network Services’ to ‘Local System’ as his SQL Server was running on his local system and there were no network services. This prompted to restart the services. As this was not the production server and his development machine, we restarted the services on the laptop (do not restart services on production server without proper planning). After changing the ‘services log on’ account to localsystem, when he attempted to reconfigure the mirroring it worked right away. As usually in production server, proper domains are configured and advance network concepts are implemented I had never faced this type of problem earlier. My friend insisted to post this solution to his situation, wherein there was no domain configured and setting up mirroring was throwing an error. According to him, this is bound to help people, like him, who are preparing for certification using single system. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL Certifications, SQL Mirroring

Read the article

Geek Fun: Virtualized Old School Windows – Windows 95

- by Matthew Guay

Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7. Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64. For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started. Here’s the first setup screen. For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices. They actually let you choose what extra parts of Windows to install if you wished. Oh, and who wants to run Windows 95 on your “Portable Computer”? Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95. Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95! Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable. We didn’t even get our test copy fully booted after installation before we saw our first error screen. Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1! The UI was still outdated in some spots. Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player. Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs? This help file about new programs designed for Windows 95 lists a lot of outdated names in tech. And, you really may want some programs. The first edition of Windows 95 didn’t even ship with Internet Explorer. We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window. Double click on C:, and it opens in a new window. Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search! If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer. I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane. Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it! At least we can all be thankful for our modern computers and operating systems today, right? Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

Search Results

Search found 37931 results on 1518 pages for 'computer case'.

Page 225/1518 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232 | Next Page >

- by jellly

- by mkneissl

- by user1780526

- by alexey

- by MANAL

- by user153777

- by Endru6

- by Stephen Murby

- by Jeff

- by Dfowj

- by Heptic

- by Ajeet

- by Brandon

- by Zhasulan Berdybekov

- by Eiseldora

- by stack.user.1

- by user600950

- by numerical25

- by brettlwilliams

- by HTMZ

- by misterich

- by DemonSOCKET

- by mbcrump

- by pinaldave

- by Matthew Guay

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232 | Next Page >