Search Results

Search found 23648 results on 946 pages for 'tab size'.

Page 225/946 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

• C# UserControl Validation

  - by Barry

  Hi, I have a UserControl with a Tab Control containing three tabs. Within the tabs are multiple controls - Datetimepickers, textboxes, comboboxes. There is also a Save button which when clicked, calls this.ValidateChildren(ValidationConstraints.Enabled) Now, I click save and a geniune validation error occurs. I correct the error and then click save again - valdiation errors occur on comboboxes on a different tab. If I navigate to this tab and click save, everything works fine. How can this be? I haven't changed any values in the comboboxes so how can the fail validation then pass validation? The comboboxes are bound to a dataset with their selectedValue and Text set. I just don't understand what is happening here. This behaviour also occurs for some textboxes too. The validation rule is that they have to be a decimal - the default value is zero, which is allowed. The same thing happens, they fail validation the first time - I make no changes, click save again and they pass validation. If you need any further information please let me know thanks Barry

  Read the article

• Can someone help fix my vimrc config?

  - by alex

  set nohlsearch set ai set bg=dark set showmatch highlight SpecialKey ctermfg=DarkGray set listchars=tab:>-,trail:~ set list autocmd BufRead *.py set smartindent cinwords=if,elif,else,for,while,try,except,finally,def,class set tabstop=4 set shiftwidth=4 set expandtab set autoindent set smartindent syntax on set listchars=tab:>- set listchars+=trail:. set ignorecase set smartcase map <C-t><up> :tabr<cr> map <C-t><down> :tabl<cr> map <C-t><left> :tabp<cr> map <C-t><right> :tabn<cr> map <F1> <Esc> imap <F1> <Esc> set pastetoggle=<F5> This is my vimrc. I want to fix it so that it doesn't show ---- ---- when other people tab. Thank.

  Read the article

• question about combining jquery tabs and a toggling horizontal slide panel

  - by Clay

  Hi, I'm attempting to combine a horizontally sliding panel and the ui tabs plugin. The idea is that you press a button, a panel slides open and inside is a series of tabs that expand content below. In terms of getting this to function in the most basic sense, so far so good: http://www.claylerner.com/bio_alt/ And my source looks like this: $(document).ready(function(){ $(".btn-slide").click(function(){ $("#panel").animate({width: 'toggle'}); }); }); $(function() { $("#tabs").tabs({ selected: -1 }); }); However, the problem I'm running into occurs when you have a tab exapnded and then you collapse the horizontal panel--as you can see the animation that hides the currently expanded tab looks pretty clunky. I get that this is happening because there's not a separate function hiding the expanded tab. So my question is, how can I make it so that when the button to collapse the panel (".btn-slide") is toggled it first hides any currently expanded tabs and then hides the open panel. Thanks so much!

  Read the article

• NetBeans Tips and Tricks

  - by cdmckay

  I just saw an Eclipse tips & tricks post and was wondering if anyone had any tips & tricks for my IDE of choice: NetBeans. Here's a few I know and find to be useful: Removing a package: After you remove a package in NetBeans, it sticks around as a grayed-out package in your Project view. To get rid of that, switch to Files view and delete the directory. Alt-Insert (in Windows) opens up a Generate submenu at your cursor. A nice shortcut for quickly generating getters/setters (among other things). Selecting a chunk of code, right-clicking and then clicking "Refactor Introduce Method" will have NetBeans introduce a method, complete with arguments and return value. Of course you have to make sure the chunk of code only has one return value. Sometimes when you run a build and it crashes, the Java window sticks around at the bottom. I used to just click X until Windows let me End Task, but there's a nicer way to get rid of them. Click "Run Stop Build/Run" and NetBeans will close the window for you. It'll even let you close multiple applications at once. These may seem obvious to grizzled NetBeans developers, but I thought they might be useful for NetBeans newbs like me. Anyone else have any tips/tricks to share? Here are some from the comments: NetBeans allows for code templates. You can even add yours on the Code Templates tab under the Editor settings on the Options window. Some examples: Type sout and hit the tab key as a shorcut for System.out.println("") Type psvm and hit the tab key as a shorcut for public static void main(String args[]) {} Ctrl Shift C: Comments out the selected block of code. Alt Shift F: Formats the selected block of code. Ctrl E: Deletes current line. Ctrl Shift I: Fixes your imports, handy if you've just written a piece of code that needs a lot of packages imported.

  Read the article

• Dismissing UIImagePickerController from UITabBarController

  - by Dave

  I have a tab bar application whereby one tab uses a navigation controller to move through a series of views. On the final view, there is a button to add a photo, which presents a UIImagePickerController. So far, so good - however when I finish picking the image, or cancel the operation, the previous view is loaded, but without the tab bar. I'm sure I'm missing something elementary, but any suggestions on how to properly release the UIImagePickerController would be much appreciated. The code is as follows: ImagePickerViewController *aController = [[ImagePickerViewController alloc]; initWithNibName:@"ImagePickerViewController" bundle:[NSBundle mainBundle]]; [self presentModalViewController:aController animated:YES]; [aController release]; //viewDidLoad self.window = [[[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]] autorelease]; imagePickerController = [[UIImagePickerController alloc] init]; imagePickerController.delegate = self; if([UIImagePickerController isSourceTypeAvailable: UIImagePickerControllerSourceTypeCamera]){ imagePickerController.sourceType = UIImagePickerControllerSourceTypeCamera; } else { imagePickerController.sourceType = UIImagePickerControllerSourceTypePhotoLibrary; } [window addSubview:imagePickerController.view]; //ImagePickerViewController imagePickerControllerDidCancel - FinalViewController is the last view in the stack controlled by a navigation controller which contains the button to present the UIImagePickerController [picker dismissModalViewControllerAnimated:YES]; FinalViewController *aController = [[FinalViewController alloc initWithNibName:@"FinalViewController" bundle:[NSBundle mainBundle]]; [picker presentModalViewController:aController animated:YES]; [aController release];

  Read the article

• Positioning one div to the right of another

  - by Jonno_FTW

  Hi I have the following html and css. But what I can't figure out is how to have the tabs div at the right of the main div. So that they stick out the right like bookmarks. .main { -moz-border-radius:10px; height: 75%; width: 60%; position: absolute; top: 15%; left: 20%; right: auto; } .tabs { width: 50px; height: 1.3em; position: absolute; float: right; } #tab { margin: 10px 10px 10px 0px;} And the html: <div class="main"> <div id="content"> Some main content </div> </div> <div class="tabs"> <div class="tabs" id="tab"> <a href="#" alt="Home"> Home </a> </div> <div class="tabs" id="tab"> <a href="#" alt="About"> About </a> </div>

  Read the article

• tabs on web page and seo

  - by GaVrA

  I know there is a lot of js plugins to do "tabs", but also i can do it my self. Just have some elements with display:none and when you click some other element display changes to block, or something like that. Now, i have a one site i am developing, where i am giving specific users(all within one usergroup) access to edit only one page which i have created. That part is done. Now i have a request to give those users ability to edit 2 more sub pages, but since its all gonna be the same, like text with some pictures, i was thinking to put 3 textarea's so they will have 1 page where they can edit content of all those 3 pages. What i also thought was to only have one page and on it to have 3 tabs. Each tab for each possible page. When i started thinking about that the only concern was seo. How does seo works regarding elements with display:none? What jquery tabs plugin do you recommend that has the ability to access tabs via id of the element in url? I was looking at jquery ui demo but there when you get the url of one of those tabs and try to open it in new window, that tab is not opened. For example this link: http://jqueryui.com/demos/tabs/#tabs-2 It does not open tab #2... Any help is appreciated!

  Read the article

• How to create Dictionary object in AppDelegate to access objectkey in another ViewController

  - by TechFusion

  Hello, I have created Window Based application and tab bar controller as root controller. My objective is to store Text Field data values in one tab bar VC and will be accessible and editable by other VC and also retrievable when application start. I am looking to use NSDictionary class in AppDelegate so that I can access stroed Data Values with keys. //TestAppDelegate.h @interface { ..... .... NSDictionary *Data; } @property (nonatomic, retain) NSDictionary *Data; //TestAppDelegate.m #import "TestAppDelegate.h" NSString *kNamekey =@"Namekey"; NSString *kUserIDkey =@"UserIDkey"; NSString *kPasswordkey =@"Passwordkey"; @implemetation TestAppDelegate @synthesize Data; -(void)applicationDidFinishLaunching:(UIApplication)application { NSString *NameDefault; NSString *UserIDdefault; NSString *Passworddefault; NSString *testvalue = [[NSUserDefaults standardUserDefaults] stringForKey: kNamekey]; if(testvalue == nil) { NSDictionary *appDefaults = [NSDictionary dictionaryWithObjectsAndKeys: NameDefault, kNamekey, UserIdefault kUserIDkey, Passwordefault kPasswordkey, nil]; self.Data = appDefaults; [[NSUserDefaults standardUserDefaults] registerDefaults:appDefaults]; [[NSUserDefaults standardUserDefaults] synchronize]; } else { } } Here ViewController is ViewController of Navigation Controller which is attached with one tab bar.. I have attached xib file with ViewController //ViewController.h @interface IBOutlet UITextField *Name; IBOutlet UITextField *UserId; IBOutlet UITextField *Password; } @property(retain,nonatomic) IBOutlet UITextField *Name @property(retain,nonatomic) IBOutlet UITextField *UserId; @property(retain,nonatomic) IBOutlet UITextField *Password; -(IBAction)Save:(id)sender; @end Here in ViewController.m I want to store Text Field input data with key which are defined in AppDelegate. I have linked Save Barbutton with action. Here I am not getting how to access NSDictionary class with object and keys in ViewController. //ViewController.m -(IBAction)Save:(id)sender{ TestAppDelegate *appDelegate = (TestAppDelegate*)[[UIApplication sharedApplication] delegate]; //Here how to access knamekey here to set object(Name.test) value with key } Please guide me about this. Thanks,

  Read the article

• Package caption Error: Continued 'figure' after 'table'

  - by Eduardo

  Hello I am having a problem with the numbering of figures using Latex, I am getting this error message: Package caption Error: Continued 'figure' after 'table' This is my code: \begin{table} \centering \subfloat[Tabla1\label{tab:Tabla1}]{ \small \begin{tabular}{ | c | c | c | c | c |} \hline \multicolumn{5}{|c|}{\textbf{Tabla 1}} \\ \hline ... ... \end{tabular} } \qquad \subfloat[Tabla2\label{tab:Tabla2}]{ \small \begin{tabular}{ | c | c | c | c | c |} \hline \multicolumn{5}{|c|}{\textbf{Tabla 2}} \\ \hline ... ... \end{tabular} } \caption{These are tables} \label{tab:Tables} \end{table} \begin{figure} \centering \subfloat[][Figure 1]{\label{fig:fig1}\includegraphics[width = 14cm]{fig1}} \qquad \subfloat[][Figure 2]{\label{fig:fig2}\includegraphics[width = 14cm]{fig2}} \end{figure} \begin{figure}[t] \ContinuedFloat \subfloat[][Figure 2]{\label{fig:fig3}\includegraphics[width = 14cm]{fig3}} \caption{Those are figures} \label{fig:Figures} \end{figure} \newpage What I want to do, it is to have this configuration: Table Table Figure 1 Figure 2 Figure 3 Since Figure 1 and Figure 2 are too big to fit vertically I want the Figure 3 to be alone in another page that's why I have the \ContinuedFloat. Externally looks fine but the problem is the numbering, I am getting for the Figures the number 5.2, that is the same number that a Figure I have before (The correct number should be 5.3). However if I try to reference the figures: \ref{fig:fig1}, \ref{fig:fig2} y \ref{fig:fig2} I get: 5.3a, 5.3b y 5.2c The two first right the last one wrong. I have been stuck with this for hours any ideas?. Thans a lot in advance

  Read the article

• tabBarController and navigationControllers in landscape mode, episode II

  - by unforgiven

  I have a UITabBarController, and each tab handles a different UIViewController that pushes on the stack new controllers as needed. In two of these tabs I need, when a specific controller is reached, the ability to rotate the iPhone and visualize a view in landscape mode. After struggling a lot I have found that it is mandatory subclassing UITabBarController to override shouldAutorotateToInterfaceOrientation. However, if i simply return YES in the implementation, the following undesirable side effect arises: every controller in every tab is automatically put in landscape mode when rotating the iPhone. Even overriding shouldAutorotateToInterfaceOrientation in each controller to return NO does not work: when the iPhone is rotated, the controller is put in landscape mode. I implemented shouldAutorotateToInterfaceOrientation as follows in the subclassed UITabBarController: (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { if([self selectedIndex] == 0 || [self selectedIndex] == 3) return YES; return NO; } So that only the two tabs I am interested in actually get support for landscape mode. Is there a way to support landscape mode for a specific controller on the stack of a particular tab? I tried, without success, something like (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { if([self selectedIndex] == 0 || [self selectedIndex] == 3) { if ([[self selectedViewController] isKindOfClass: [landscapeModeViewController class]]) return YES; } return NO; } Also, I tried using the delegate method didSelectViewController, without success. Any help is greatly appreciated. Thank you.

  Read the article

• MS Access 2003 - Save button enabling on form open on different tabs

  - by Justin

  I have a tab control on a form, and a couple different tabs have save buttons on them. Once the user saves data (via SQL statements in VBA), I set the .enabled = false so that they cannot use this button again until moving to a brand new record (which is a button click on the overall form). so when my form open i was going to reference a sub that enabled all these save buttons because the open event would mean new record. though i get an error that says it either does not exist, or is closed. any ideas? thanks EDIT: Sub Example() error handling Dim db as dao.database dim rs as dao.recordset dim sql as string SQL = "INSERT INTO tblMain (Name, Address, CITY) VALUES (" if not isnull (me.name) then sql = sql & """" & me.name & """," else sql = sql & " NULL," end if if not insull(me.adress) then sql = sql & " """ & me.address & """," else sql = sql & " NULL," end if if not isnull(me.city) then sql = sql & " """ & me.city & """," else sql = sql & " NULL," end if 'debug.print(sql) set db = currentdb db.execute (sql) MsgBox "Changes were successfully saved" me.MyTabCtl.Pages.Item("SecondPage").setfocus me.cmdSaveInfo.enabled = false and then on then the cmdSave needs to get re enabled on a new record (which by the way, this form is unbound), so it all happens when the form is re-opened. I tried this: Sub Form_Open() me.cmdSaveInfo.enabled = true End Sub and this is where I get the error stated above. So this is also not the tab that has focus when the form opens. Is that why I get this error? I cannot enable or disable a control when the tab is not showing?

  Read the article

• RoR: Replace_html with partial and collection not functioning

  - by Jack

  I am trying to create a tabbed interface using the prototype helper method "replace_html." I have three different partials I am working with. The first one is the 'main tab' and it is loaded automatically like so: <div id = "grid"> <% things_today = things.find_things_today %> <%= render :partial => "/todaything", :collection => things_today, :as =>:thing %> </div> ...which works fine. Similarly, I have a _tomorrowthing partial which would replace the content in the 'grid' div like so: <%things_tomorrow = things.find_things_tomorrow%> <%= link_to_function('Tomorrow',nil, :id=>'tab') do |page| page.replace_html 'grid' , :partial => '/tomorrowthing',:collection => things_tomorrow, :as => :thing end %> If I click on this tab nothing happens at all. Using firebug, the only errors I find are a missing ) after argument list which is contained in the Element.update block where the link_to_function is called. What am I doing wrong?

  Read the article

• Consecutive Tables in Latex

  - by Tim

  Hi, I wonder how to place several tables consecutively in Latex? The page with the text right before the first table has a little space but not enough for the first table, so the first table is to be placed on the top of the next page, although I use "\begin{table}[!h]" for it. The second table does not fit into the place in the rest of the page of the first table, so I think I might use longtable for it to span the rest of the page and the top of the next page. Similarly, I use longtable for the third table. The latex code is as follows: ... % some text \begin{table}[!h] \caption{Table 1. \label{tab:1}} \begin{center} \begin{tabular}{c c} ... \end{tabular} \end{center} \end{table} \begin{center} \begin{longtable}{ c c } \caption{Table 2. \label{tab:2}}\\ ... \end{longtable} \end{center} \begin{center} \begin{longtable}{ c c } \caption{Table 3. \label{tab:3}}\\ ... \end{longtable} \end{center} ... % some text In the compiled pdf file it turns out that the order of the tables is messed up. The first table is placed behind the second and third one, and the second one spans the page with text before the tables and the next page with the third one following it. I would like to know how I can make the three tables appear consecutively in order, and there are no space left blank between them and between the text and the tables? Or if what I hope is not possible, what is the best strategy then? Thanks and regards! EDIT: Removing [!h] does not make improvement, the first table is still behind the second and the third.

  Read the article

• Prevent default on a click within a JQuery tabs in Google Chrome.

  - by Sydney

  I would like to prevent the default behaviour of a click on a link. I tried the return false; also javascript:void(0); in the href attribute but it doesn’t seem to work. It works fine in Firefox, but not in Chrome and IE. I have a single tab that loads via AJAX the content which is a simple link. <script type="text/javascript"> $(function() { $("#tabs").tabs({ ajaxOptions: { error: function(xhr, status, index, anchor) { $(anchor.hash).html("Couldn't load this tab. We'll try to fix this as soon as possible. If this wouldn't be a demo."); }, success: function() { alert('hello'); $('#lk').click(function() { alert('Click Me'); return false; }); } }, load: function(event, ui) { $('a', ui.panel).click(function() { $(ui.panel).load(this.href); return false; }); } }); }); </script> <body> <div id="tabs"> <ul> <li><a href="linkChild.htm">Link</a></li> </ul> </div> </body> The content of linkChild.htm is <a href="javascript:void(0)" id="lk">Click Me</a> So basically when the tab content is loaded with success, a click event is attached to the link “lk”. When I click on the link, the alert is displayed but then link disappears. I check the HTML and the element is actually removed from the DOM.

  Read the article

• How To Compile YACC And LEX?

  - by nisha

  Actually I'm having YACC file as pos.yacc and LEX file name is pos1.lex.. while compilling I'm getting the folowing error... malathy@malathy:~$ cc lex.yy.c y.tab.c -ly -ll pos1.lex %{ #include "y.tab.h" int yylval; %} DIGIT [0-9]+ %% {DIGIT} {yylval=atoi(yytext);return DIGIT;} [\n ] {} . {return *yytext;} %% yacc file is pos.yacc %token DIGIT %% s:e {printf("%d\n",$1);} e:DIGIT {$$=$1;} |e e "+" {$$=$1+$2;} |e e "*" {$$=$1*$2;} |e e "-" {$$=$1-$2;} |e e "/" {$$=$1/$2;} ; %% main() { yyparse(); } yyerror() { printf("Error"); } so while compiling i m getting like malathy@malathy:~$ cc lex.yy.c y.tab.c -ly -ll pos.y: In function ‘yyerror’: pos.y:16: warning: incompatible implicit declaration of built-in function ‘printf’ pos.y: In function ‘yyparse’: pos.y:4: warning: incompatible implicit declaration of built-in function ‘printf’

  Read the article

• Opening a xul file in response to a toolbar extension button click

  - by Graham

  I'm currently building my first Firefox extension, and am having a little difficulty with one piece of functionality. I'd like to open a new browser tab in response to a button click on the toolbar. The new tab should contain the contents of a webpage, together with some extra buttons. At the moment I've created a separate xul file for the contents of the new tab: <?xml version="1.0"?> <?xml-stylesheet href="chrome://global/skin/" type="text/css"?> <window id="myapp-report-window" title="Example 4.5.1" xmlns:html="http://www.w3.org/1999/xhtml" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"> <script type="application/x-javascript" src="chrome://myapp/content/main.js" /> <toolbox> <toolbar id="nav-toolbar"> <toolbarbutton label="This-is-going-to-do-some-stuff"/> </toolbar> </toolbox> <iframe id="myapp-report-frame" flex="1"/> <script type="text/javascript"> function loadPage(url){ document.getElementById('myapp-report-frame').setAttribute('src',url); } </script> </window> This xul file is launched via this javascript, referenced from the main myapptoolbar.xul: gBrowser.selectedTab = gBrowser.addTab('chrome://myapp/content/report.xul'); var newTabBrowser = gBrowser.getBrowserForTab(gBrowser.selectedTab); newTabBrowser.addEventListener("load", function(){ loadPage('http://www.somedynamicallysetwebsite.com'); }, true); The problem that I'm having is that the loadPage function is not being found, so the src attribute of the iframe is never set. I'm sure it's some silly scoping problem, but I'm very new to firefox extensions (day 2!) so any help would be much appreciated. Thanks for looking! Graham

  Read the article

• Including/Organzing HTML in large javascript project

  - by Bill Zimmerman

  Hi, I've a got a fairly large web app, with several mini applets on each page. These applets are almost always identical jquery apps. I am looking for advice on how I should organize/include smaller parts of these jquery apps within my larger project. For example, each app has several independent tabs. If possible, I would like to store each of the tabs as a seperate .html file because this makes development easier. My requirements are: 1) All of the html 'tabs' are loaded on the clients end when the page loads. I would like to avoid any delays by dynamically requesting the tab html. 2) If possible, I would like to minimize the raw data sent. For example, it would be preferable to send each tab 1 time, instead of sending each tab 10 times if there are ten applets on that page. Questions: 1) What are my options for 'including' the HTML files / javascript code 2) Any tips for keeping my development simple in this situation? Surely there has to be a better way than just editing one massive html file when working with large pages.

  Read the article

• deep linking in Excel sheets exported to html

  - by pomarc

  hello everybody, I am working on a project where I must export to html a lot of Excel files. This is pretty straightforward using automation and saving as html. The problem is that many of these sheets have links to worksheets of some other files. I must find a way to write a link to a single inner worksheet. When you export a multisheet excel file to html, excel creates a main htm file, a folder named filename_file, and inside this folder it writes down several files: a css, an xml list of files, a file that creates the tab bar and several html files named sheetxxx.htm, each one representing a worksheet. When you open the main file, you can click the menu bar at the bottom which lets you select the appropriate sheet. This is in fact a link, which replaces a frame content with the sheetxxx.htm file. When this file is loaded a javascript function that selects the right tab gets called. The exported files will be published on a web site. I will have to post process each file and replace every link to the other xls files to the matching htm file, finding a way to open the right worksheet. I think that I could add a parameter to the processed htm file link url, such as myfile.htm?sh=sheet002.htm if I want to link to the second worksheet of myfile.htm (ex myfile.xls). After I've exported them, I could inject a simple javascript into each of the main files which, when they are loaded, could retrieve the sh parameter with jQuery (this is easy) and use this to somehow replace the frSheet frame contents (where the sheets get loaded), opening the right inner sheet and not the default sheet (this is what I call deep linking) mimicking what happens when a user clicks on a tab. This last step is missing... :) I am considering different options, such as replacing the source of the $("frSheet") frame after document.ready. I'd like to hear from you any advice on what could be the best way to realize that in your opinion. any help is greately appreciated, many thanks.

  Read the article

• .net design pattern question

  - by user359562

  Hi. I am trying to understand design pattern problems. I am trying to modify the code like this in winforms and trying to see if any design pattern suits my requirement. Please suggest which is the best design pattern in this scenario. This is very basic code containing 2 tab pages which might have different controls can be added dynamically and read out different files on click of particular tab. To elaborate more... I have written this code to learn and understand design pattern. This is just a scenario where user click on a particular tab which will show dynamic controls generated. public partial class Form1 : Form { public Form1() { InitializeComponent(); } private void tabControl1_SelectedIndexChanged(object sender, EventArgs e) { if (tabControl1.SelectedTab.Name.Equals("tabPage1")) { GeneratedynamicControlsForTab1(); } else if (tabControl1.SelectedTab.Name.Equals("tabPage2")) { GeneratedynamicControlsForTab2(); } } private void GeneratedynamicControlsForTab1() { Label label1 = new Label(); label1.Text = "Label1"; tabPage1.Controls.Add(label1); ReadCSVFile(); } private void GeneratedynamicControlsForTab2() { tabPage1.Controls.Clear(); Label label2 = new Label(); label2.Text = "Label2"; tabPage2.Controls.Add(label2); ReadTextFile(); } private void ReadCSVFile() { } private void ReadTextFile() { } }

  Read the article

• Sizing issues while adding a .Net UserControl to a TabPage

  - by TJ_Fischer

  I have a complex Windows Forms GUI program that has a lot of automated control generation and manipulation. One thing that I need to be able to do is add a custom UserControl to a newly instatiated TabPage. However, when my code does this I get automatic resizing events that cause the formatting to get ugly. Without detailing all of the different Containers that could possibly be involved, the basic issue is this: At a certain point in the code I create a new tab page: TabPage tempTabPage = new TabPage("A New Tab Page"); Then I set it to a certain size that I want it to maintain: tempTabPage.Width = 1008; tempTabPage.Height = 621; Then I add it to a TabControl: tabControl.TabPages.Add(tempTabPage); Then I create a user control that I want to appear in the newly added TabPage: CustomView customView = new CustomView("A new custom control"); Here is where the problem comes in. At this point both the tempTabPage and the customView are the same size with no padding or margin and they are the size I want them to be. I now try to add this new custom UserControl to the tab page like this: tempTabPage.Controls.Add(customView); When making this call the customView and it's children controls get resized to be larger and so parts of the customView are hidden. Can anyone give me any direction on what to look for or what could be causing this kind of issue? Thanks ahead of time.

  Read the article

• How should I handle multiple links ot the same page with different Query Strings

  - by RandomBen

  In the website I am working on, there is a product page with 8 tabs on it, showing different aspects of the product. There are quick links on other pages within the site that take you to the page and to a specific link specified by a query string. For example the base page would be www.example.com/Product1. And then there are links like this: www.example.com/Product1?tab=CADDrawing www.example.com/Product1?tab=Schematics www.example.com/Product1?tab=Reviews My concern is that Google sees each of these links as a different URL but they aren't and the data on the page is 100% the same. Is there any easy way to make it so Google either knows that www.example.com/Product1 is the base page or doesn't follow the links with Query Strings? I thought about using rel="nofollow" but that seems like it would actually hurt my page ranking. Most of the websites, including Googles on webmaster pages, is unclear. The other option is to add the rel="canonical" to the pages that have a query string but not to the base page. Does that succeed in stopping all of the noisy links?

  Read the article

• iPhone toolbar shared by multiple views

  - by codemonkey

  Another iPhone noob question. The app I'm building needs to show a shared custom UIToolbar for multiple views (and their subviews) within a UITabBarController framework. The contents of the custom toolbar are the same across all the views. I'd like to be able to design the custom toolbar as a xib and handle UI events from its own controller class (I'm assuming I can subclass UIToolbar to do so?). That way I could define IBOutlet & IBAction items, etc. Then I could associate this custom toolbar with eachs of the UITabBarController views (and their subviews). But I'm having trouble finding out whether that's possible - and if so, how to do it. In particular, I want to be able to push new views onto UINavigationControllers that are each associated with parent UITabBarController tabs. So, to summarize, I want a: custom toolbar shared by multiple views which are managed by multiple navigation controllers and the navigation controllers are associated with different tabs of a parent tab bar controller The tab bar controller itself is launched modally, though I don't believe that's relevant. Anyway, the tab bar controller is working, as are its child navigation controllers. I'm just having a little trouble figuring out how to persist the shared toolbar to the various subviews. I'd settle for a good clean way of implementing programmatically... though I'd prefer the flexibility of keeping the toolbar's visual design in a xib. Anyone have any suggestions?

  Read the article

• Add JTabbedPane with buttons, labels ... in a frame with an absolute layout

  - by alibenmessaoud

  I have a code in java. package interfaces; import javax.swing.JPanel; public class TabbedPaneDemo extends JPanel { public TabbedPaneDemo() { JTabbedPane pane = new JTabbedPane(); JPanel dashboardPanel = new JPanel(); dashboardPanel.add(new JLabel("Dashboard")); // Add Dashboard Tab pane.addTab("Dashboard", dashboardPanel); JPanel transactionPanel = new JPanel(); transactionPanel.add(new JLabel("Transactions")); // Add Transactions Tab pane.addTab("Transactions", transactionPanel); JPanel accountPanel = new JPanel(); accountPanel.add(new JLabel("Account")); // Add Account Tab pane.addTab("Account", accountPanel); this.setLayout(new BorderLayout()); this.setPreferredSize(new Dimension(400, 200)); this.add(pane, BorderLayout.CENTER); } public static void main(String[] args) { JPanel panel = new TabbedPaneDemo(); panel.setOpaque(true); // panel.setBounds(12, 12, 45, 98); JFrame frame = new JFrame("JTabbedPane Demo"); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setContentPane(panel); frame.pack(); frame.setVisible(true); }} and the output it's ! I want to change in this code to be like this. I want use an absolute layout (null). I want to add menu, buttons and labels with these tabs ... How can I do?? Thanks in advance. Best regards, Ali

  Read the article

• Help with interesting VS2010 and SQL2008 bug

  - by user355770

  Hey So im using Visual Studio 2010 to create a webpage. im calling some tabels from sql server 2008 here is where im confused... The code runs fine no errors. The pages works except im missing my rows in my 3rd column from the table. Everything else shows up. Ive checked to make sure the names are matching everywhere and that in sql the joins and such worked. Its just very weird that i'd be missing my 2 rows from the 3rd column. anyone have any ideas to help?? the error is in the tab called research material else if (tabTagId == "tpArlington_ProjectInformation") { repArlington_ProjectInformation.DataSource = ds; repArlington_ProjectInformation.DataBind(); } else if (tabTagId == "tpArlington_Plan") { repArlington_Plan.DataSource = ds; repArlington_Plan.DataBind(); } else if (tabTagId == "tpArlington_ResearchMaterial") { repArlington_ResearchMaterial.DataSource = ds; repArlington_ResearchMaterial.DataBind(); } else if (Session["projectAbbreviation"].ToString() == "ARLING") { tpArlington_ProjectInformation.HeaderText = "Project Information"; tpArlington_ProjectInformation.Visible = true; tpArlington_Plan.HeaderText = "Plan"; tpArlington_Plan.Visible = true; tpArlington_ResearchMaterial.HeaderText = "ResearchMaterial"; tpArlington_ResearchMaterial.Visible = true; getTabData("tpArlington_ProjectInformation"); getTabData("tpArlington_Plan"); getTabData("tpArlington_ReasearchMaterial"); } the 2 other tabs work perfect. the research material is where the problem is. the stuff in the tab doesn't come up. the text in the tab DOES come up but not the stuff from sql. the stuff in sql looks good, the ids match and everything is joined properly otherwise the other 2 tabs wouldnt work. that is what is confusing me. any suggestions or specific info you need just ask. thanks!

  Read the article

• Refactoring Tabs

  - by Nimbuz

  HTML: <ul> <li><a href="#tab1">tab1</a></li> <li><a href="#tab2">tab2</a></li> </ul> <div id="tab1" class="tab-content">content 1</div> <div id="tab2" class="tab-content">content 2</div> jQuery $('#mode li:first').addClass('active'); $('#mode li.active').append('<span class="arrow">&nbsp;</span>'); $('#mode li a').click(function () { $('#mode li').removeClass('active') $('.arrow').remove(); $(this).parent().addClass('active').append('<span class="arrow">&nbsp;</span>'); var a = $(this).attr('href'); $('.tab-content').hide(); $(a).show(); return false; }); .. works, but looking ugly. Can it be simplified/reduced further? Many thanks!

  Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >