Search Results

Search found 25534 results on 1022 pages for 'write powershell'.

Page 225/1022 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

• Joins in single-table queries

  - by Rob Farley

  Tables are only metadata. They don’t store data. I’ve written something about this before, but I want to take a viewpoint of this idea around the topic of joins, especially since it’s the topic for T-SQL Tuesday this month. Hosted this time by Sebastian Meine (@sqlity), who has a whole series on joins this month. Good for him – it’s a great topic. In that last post I discussed the fact that we write queries against tables, but that the engine turns it into a plan against indexes. My point wasn’t simply that a table is actually just a Clustered Index (or heap, which I consider just a special type of index), but that data access always happens against indexes – never tables – and we should be thinking about the indexes (specifically the non-clustered ones) when we write our queries. I described the scenario of looking up phone numbers, and how it never really occurs to us that there is a master list of phone numbers, because we think in terms of the useful non-clustered indexes that the phone companies provide us, but anyway – that’s not the point of this post. So a table is metadata. It stores information about the names of columns and their data types. Nullability, default values, constraints, triggers – these are all things that define the table, but the data isn’t stored in the table. The data that a table describes is stored in a heap or clustered index, but it goes further than this. All the useful data is going to live in non-clustered indexes. Remember this. It’s important. Stop thinking about tables, and start thinking about indexes. So let’s think about tables as indexes. This applies even in a world created by someone else, who doesn’t have the best indexes in mind for you. I’m sure you don’t need me to explain Covering Index bit – the fact that if you don’t have sufficient columns “included” in your index, your query plan will either have to do a Lookup, or else it’ll give up using your index and use one that does have everything it needs (even if that means scanning it). If you haven’t seen that before, drop me a line and I’ll run through it with you. Or go and read a post I did a long while ago about the maths involved in that decision. So – what I’m going to tell you is that a Lookup is a join. When I run SELECT CustomerID FROM Sales.SalesOrderHeader WHERE SalesPersonID = 285; against the AdventureWorks2012 get the following plan: I’m sure you can see the join. Don’t look in the query, it’s not there. But you should be able to see the join in the plan. It’s an Inner Join, implemented by a Nested Loop. It’s pulling data in from the Index Seek, and joining that to the results of a Key Lookup. It clearly is – the QO wouldn’t call it that if it wasn’t really one. It behaves exactly like any other Nested Loop (Inner Join) operator, pulling rows from one side and putting a request in from the other. You wouldn’t have a problem accepting it as a join if the query were slightly different, such as SELECT sod.OrderQty FROM Sales.SalesOrderHeader AS soh JOIN Sales.SalesOrderDetail as sod on sod.SalesOrderID = soh.SalesOrderID WHERE soh.SalesPersonID = 285; Amazingly similar, of course. This one is an explicit join, the first example was just as much a join, even thought you didn’t actually ask for one. You need to consider this when you’re thinking about your queries. But it gets more interesting. Consider this query: SELECT SalesOrderID FROM Sales.SalesOrderHeader WHERE SalesPersonID = 276 AND CustomerID = 29522; It doesn’t look like there’s a join here either, but look at the plan. That’s not some Lookup in action – that’s a proper Merge Join. The Query Optimizer has worked out that it can get the data it needs by looking in two separate indexes and then doing a Merge Join on the data that it gets. Both indexes used are ordered by the column that’s indexed (one on SalesPersonID, one on CustomerID), and then by the CIX key SalesOrderID. Just like when you seek in the phone book to Farley, the Farleys you have are ordered by FirstName, these seek operations return the data ordered by the next field. This order is SalesOrderID, even though you didn’t explicitly put that column in the index definition. The result is two datasets that are ordered by SalesOrderID, making them very mergeable. Another example is the simple query SELECT CustomerID FROM Sales.SalesOrderHeader WHERE SalesPersonID = 276; This one prefers a Hash Match to a standard lookup even! This isn’t just ordinary index intersection, this is something else again! Just like before, we could imagine it better with two whole tables, but we shouldn’t try to distinguish between joining two tables and joining two indexes. The Query Optimizer can see (using basic maths) that it’s worth doing these particular operations using these two less-than-ideal indexes (because of course, the best indexese would be on both columns – a composite such as (SalesPersonID, CustomerID – and it would have the SalesOrderID column as part of it as the CIX key still). You need to think like this too. Not in terms of excusing single-column indexes like the ones in AdventureWorks2012, but in terms of having a picture about how you’d like your queries to run. If you start to think about what data you need, where it’s coming from, and how it’s going to be used, then you will almost certainly write better queries. …and yes, this would include when you’re dealing with regular joins across multiples, not just against joins within single table queries.

  Read the article

• SQLAuthority News – 7th Anniversary of Blog – A Personal Note

  - by Pinal Dave

  Special Day Today is a very special day – seven years ago I blogged for the very first time.  Seven years ago, I didn’t know what I was doing, I didn’t know how to blog, or even what a blog was or what to write.  I was working as a DBA, and I was trying to solve a problem – at my job, there were a few issues I had to fix again and again and again.  There were days when I was rewriting the same solution over and over, and there were times when I would get very frustrated because I could not write the same elegant solution that I had written before.  I came up with a solution to this problem – posting these solutions online, where I could access them whenever I needed them.  At that point, I had no idea what a blog was, or even how the internet worked, I had no idea that a blog would be visible to others.  Can you believe it? Google it on Yahoo! After a few posts on this “blog,” there was a surprise for me – an e-mail saying that someone had left me a comment.  I was surprised, because I didn’t even know you could comment on a blog!  I logged on and read my comment.  It said: “I like your script,but there is a small bug.  If you could fix it, it will run on multiple other versions of SQL Server.”  I was like, “wow, someone figured out how to find my blog, and they figured out how to fix my script!”  I found the bug, I fixed the script, and a wrote a thank you note to the guy.  My first question for him was: how did you figure it out – not the script, but how to find my blog?  He said he found it from Yahoo Search (this was in the time before Google, believe it or not). From that day, my life changed.  I wrote a few more posts, I got a few more comments, and I started to watch my traffic.  People were reading, commenting, and giving feedback.  At the end of the day, people enjoyed what I was writing.  This was a fantastic feeling!  I never thought I would be writing for others.  Even today, I don’t feel like I am writing for others, but that I am simply posting what I am learning every day.  From that very first day, I decided that I would not change my intent or my blog’s purpose. 72 Million Views – 2600 Posts – 57000 comments – 10 books – 9 courses Today, this blog is my habit, my addiction, my baby.  Every day I try to learn something new, and that lesson gets posted on the blog.  Lately there have been days where I am traveling for a full 24 hours, but even on those days I try to learn something new, and later when I have free time, I will still post it to the blog.  Because of this habit, this blog has over 72 millions views, I have written more than 2600 posts, and there are 57,000 comments and counting.  I have also written 10 books, 9 courses, and learned so many things.  This blog has given me back so much more than I ever put it into it.  It gave me an education, a reason to learn something new every day, and a way to connect to people.  I like to think of it as a learning chain, a relay where we all pass knowledge from one to another. Never Ending Journey When I started the blog, I thought I would write for a few days and stop, but now after seven years I haven’t stopped and I have no intention of stopping!  However, change happens, and for this blog it will start today.  This blog started as a single resource for SQL Server, but now it has grown beyond, to Sharepoint, Personal Development, Developer Training, MySQL, Big Data, and lots of other things.  Truly speaking, this blog is more than just SQL Server, and that was always my intention.  I named it “SQL Authority,” not “SQL Server Authority”!  Loudly and clearly, I would like to announce that I am going to go back to my roots and start writing more about SQL, more about big data, and more about the other technology like relational databases, MySQL, Oracle, and others.  My goal is not to become a comprehensive resource for every technology, my goal is to learn something new every day – and now it can be so much more than just SQL Server.  I will learn it, and post it here for you. I have written a very long post on this anniversary, but here is the summary: Thank You.  You all have been wonderful.  Seven years is a long journey, and it makes me emotional.  I have been “with” this blog before I met my wife, before we had our daughter.  This blog is like a fourth member of the family.  Keep reading, keep commenting, keep supporting.  Thank you all. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: About Me, MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL

  Read the article

• Creating Property Set Expression Trees In A Developer Friendly Way

  - by Paulo Morgado

  In a previous post I showed how to create expression trees to set properties on an object. The way I did it was not very developer friendly. It involved explicitly creating the necessary expressions because the compiler won’t generate expression trees with property or field set expressions. Recently someone contacted me the help develop some kind of command pattern framework that used developer friendly lambdas to generate property set expression trees. Simply putting, given this entity class: public class Person { public string Name { get; set; } } The person in question wanted to write code like this: var et = Set((Person p) => p.Name = "me"); Where et is the expression tree that represents the property assignment. So, if we can’t do this, let’s try the next best thing that is splitting retrieving the property information from the retrieving the value to assign o the property: var et = Set((Person p) => p.Name, () => "me"); And this is something that the compiler can handle. The implementation of Set receives an expression to retrieve the property information from and another expression the retrieve the value to assign to the property: public static Expression<Action<TEntity>> Set<TEntity, TValue>( Expression<Func<TEntity, TValue>> propertyGetExpression, Expression<Func<TValue>> valueExpression) The implementation of this method gets the property information form the body of the property get expression (propertyGetExpression) and the value expression (valueExpression) to build an assign expression and builds a lambda expression using the same parameter of the property get expression as its parameter: public static Expression<Action<TEntity>> Set<TEntity, TValue>( Expression<Func<TEntity, TValue>> propertyGetExpression, Expression<Func<TValue>> valueExpression) { var entityParameterExpression = (ParameterExpression)(((MemberExpression)(propertyGetExpression.Body)).Expression); return Expression.Lambda<Action<TEntity>>( Expression.Assign(propertyGetExpression.Body, valueExpression.Body), entityParameterExpression); } And now we can use the expression to translate to another context or just compile and use it: var et = Set((Person p) => p.Name, () => name); Console.WriteLine(person.Name); // Prints: p => (p.Name = “me”) var d = et.Compile(); d(person); Console.WriteLine(person.Name); // Prints: me It can even support closures: var et = Set((Person p) => p.Name, () => name); Console.WriteLine(person.Name); // Prints: p => (p.Name = value(<>c__DisplayClass0).name) var d = et.Compile(); name = "me"; d(person); Console.WriteLine(person.Name); // Prints: me name = "you"; d(person); Console.WriteLine(person.Name); // Prints: you Not so useful in the intended scenario (but still possible) is building an expression tree that receives the value to assign to the property as a parameter: public static Expression<Action<TEntity, TValue>> Set<TEntity, TValue>(Expression<Func<TEntity, TValue>> propertyGetExpression) { var entityParameterExpression = (ParameterExpression)(((MemberExpression)(propertyGetExpression.Body)).Expression); var valueParameterExpression = Expression.Parameter(typeof(TValue)); return Expression.Lambda<Action<TEntity, TValue>>( Expression.Assign(propertyGetExpression.Body, valueParameterExpression), entityParameterExpression, valueParameterExpression); } This new expression can be used like this: var et = Set((Person p) => p.Name); Console.WriteLine(person.Name); // Prints: (p, Param_0) => (p.Name = Param_0) var d = et.Compile(); d(person, "me"); Console.WriteLine(person.Name); // Prints: me d(person, "you"); Console.WriteLine(person.Name); // Prints: you The only caveat is that we need to be able to write code to read the property in order to write to it.

  Read the article

• C# async and actors

  - by Alex.Davies

  If you read my last post about async, you might be wondering what drove me to write such odd code in the first place. The short answer is that .NET Demon is written using NAct Actors. Actors are an old idea, which I believe deserve a renaissance under C# 5. The idea is to isolate each stateful object so that only one thread has access to its state at any point in time. That much should be familiar, it's equivalent to traditional lock-based synchronization. The different part is that actors pass "messages" to each other rather than calling a method and waiting for it to return. By doing that, each thread can only ever be holding one lock. This completely eliminates deadlocks, my least favourite concurrency problem. Most people who use actors take this quite literally, and there are plenty of frameworks which help you to create message classes and loops which can receive the messages, inspect what type of message they are, and process them accordingly. But I write C# for a reason. Do I really have to choose between using actors and everything I love about object orientation in C#? Type safety Interfaces Inheritance Generics As it turns out, no. You don't need to choose between messages and method calls. A method call makes a perfectly good message, as long as you don't wait for it to return. This is where asynchonous methods come in. I have used NAct for a while to wrap my objects in a proxy layer. As long as I followed the rule that methods must always return void, NAct queued up the call for later, and immediately released my thread. When I needed to get information out of other actors, I could use EventHandlers and callbacks (continuation passing style, for any CS geeks reading), and NAct would call me back in my isolated thread without blocking the actor that raised the event. Using callbacks looks horrible though. To remind you: m_BuildControl.FilterEnabledForBuilding(    projects,    enabledProjects = m_OutOfDateProjectFinder.FilterNeedsBuilding(        enabledProjects,             newDirtyProjects =             {                 ....... Which is why I'm really happy that NAct now supports async methods. Now, methods are allowed to return Task rather than just void. I can await those methods, and C# 5 will turn the rest of my method into a continuation for me. NAct will run the other method in the other actor's context, but will make sure that when my method resumes, we're back in my context. Neither actor was ever blocked waiting for the other one. Apart from when they were actually busy doing something, they were responsive to concurrent messages from other sources. To be fair, you could use async methods with lock statements to achieve exactly the same thing, but it's ugly. Here's a realistic example of an object that has a queue of data that gets passed to another object to be processed: class QueueProcessor {    private readonly ItemProcessor m_ItemProcessor = ...     private readonly object m_Sync = new object();    private Queue<object> m_DataQueue = ...    private List<object> m_Results = ...     public async Task ProcessOne() {         object data = null;         lock (m_Sync)         {             data = m_DataQueue.Dequeue();         }         var processedData = await m_ItemProcessor.ProcessData(data); lock (m_Sync)         {             m_Results.Add(processedData);         }     } } We needed to write two lock blocks, one to get the data to process, one to store the result. The worrying part is how easily we could have forgotten one of the locks. Compare that to the version using NAct: class QueueProcessorActor : IActor { private readonly ItemProcessor m_ItemProcessor = ... private Queue<object> m_DataQueue = ... private List<object> m_Results = ... public async Task ProcessOne()     {         // We are an actor, it's always thread-safe to access our private fields         var data = m_DataQueue.Dequeue();         var processedData = await m_ItemProcessor.ProcessData(data);         m_Results.Add(processedData);     } } You don't have to explicitly lock anywhere, NAct ensures that your code will only ever run on one thread, because it's an actor. Either way, async is definitely better than traditional synchronous code. Here's a diagram of what a typical synchronous implementation might do: The left side shows what is running on the thread that has the lock required to access the QueueProcessor's data. The red section is where that lock is held, but doesn't need to be. Contrast that with the async version we wrote above: Here, the lock is released in the middle. The QueueProcessor is free to do something else. Most importantly, even if the ItemProcessor sometimes calls the QueueProcessor, they can never deadlock waiting for each other. So I thoroughly recommend you use async for all code that has to wait a while for things. And if you find yourself writing lots of lock statements, think about using actors as well. Using actors and async together really takes the misery out of concurrent programming.

  Read the article

• Design review for application facing memory issues

  - by Mr Moose

  I apologise in advance for the length of this post, but I want to paint an accurate picture of the problems my app is facing and then pose some questions below; I am trying to address some self inflicted design pain that is now leading to my application crashing due to out of memory errors. An abridged description of the problem domain is as follows; The application takes in a “dataset” that consists of numerous text files containing related data An individual text file within the dataset usually contains approx 20 “headers” that contain metadata about the data it contains. It also contains a large tab delimited section containing data that is related to data in one of the other text files contained within the dataset. The number of columns per file is very variable from 2 to 256+ columns. The original application was written to allow users to load a dataset, map certain columns of each of the files which basically indicating key information on the files to show how they are related as well as identify a few expected column names. Once this is done, a validation process takes place to enforce various rules and ensure that all the relationships between the files are valid. Once that is done, the data is imported into a SQL Server database. The database design is an EAV (Entity-Attribute-Value) model used to cater for the variable columns per file. I know EAV has its detractors, but in this case, I feel it was a reasonable choice given the disparate data and variable number of columns submitted in each dataset. The memory problem Given the fact the combined size of all text files was at most about 5 megs, and in an effort to reduce the database transaction time, it was decided to read ALL the data from files into memory and then perform the following; perform all the validation whilst the data was in memory relate it using an object model Start DB transaction and write the key columns row by row, noting the Id of the written row (all tables in the database utilise identity columns), then the Id of the newly written row is applied to all related data Once all related data had been updated with the key information to which it relates, these records are written using SqlBulkCopy. Due to our EAV model, we essentially have; x columns by y rows to write, where x can by 256+ and rows are often into the tens of thousands. Once all the data is written without error (can take several minutes for large datasets), Commit the transaction. The problem now comes from the fact we are now receiving individual files containing over 30 megs of data. In a dataset, we can receive any number of files. We’ve started seen datasets of around 100 megs coming in and I expect it is only going to get bigger from here on in. With files of this size, data can’t even be read into memory without the app falling over, let alone be validated and imported. I anticipate having to modify large chunks of the code to allow validation to occur by parsing files line by line and am not exactly decided on how to handle the import and transactions. Potential improvements I’ve wondered about using GUIDs to relate the data rather than relying on identity fields. This would allow data to be related prior to writing to the database. This would certainly increase the storage required though. Especially in an EAV design. Would you think this is a reasonable thing to try, or do I simply persist with identity fields (natural keys can’t be trusted to be unique across all submitters). Use of staging tables to get data into the database and only performing the transaction to copy data from staging area to actual destination tables. Questions For systems like this that import large quantities of data, how to you go about keeping transactions small. I’ve kept them as small as possible in the current design, but they are still active for several minutes and write hundreds of thousands of records in one transaction. Is there a better solution? The tab delimited data section is read into a DataTable to be viewed in a grid. I don’t need the full functionality of a DataTable, so I suspect it is overkill. Is there anyway to turn off various features of DataTables to make them more lightweight? Are there any other obvious things you would do in this situation to minimise the memory footprint of the application described above? Thanks for your kind attention.

  Read the article

• Sort Data in Windows Phone using Collection View Source

  - by psheriff

  When you write a Windows Phone application you will most likely consume data from a web service somewhere. If that service returns data to you in a sort order that you do not want, you have an easy alternative to sort the data without writing any C# or VB code. You use the built-in CollectionViewSource object in XAML to perform the sorting for you. This assumes that you can get the data into a collection that implements the IEnumerable or IList interfaces.For this example, I will be using a simple Product class with two properties, and a list of Product objects using the Generic List class. Try this out by creating a Product class as shown in the following code:public class Product {  public Product(int id, string name)   {    ProductId = id;    ProductName = name;  }  public int ProductId { get; set; }  public string ProductName { get; set; }}Create a collection class that initializes a property called DataCollection with some sample data as shown in the code below:public class Products : List<Product>{  public Products()  {    InitCollection();  }  public List<Product> DataCollection { get; set; }  List<Product> InitCollection()  {    DataCollection = new List<Product>();    DataCollection.Add(new Product(3,        "PDSA .NET Productivity Framework"));    DataCollection.Add(new Product(1,        "Haystack Code Generator for .NET"));    DataCollection.Add(new Product(2,        "Fundamentals of .NET eBook"));    return DataCollection;  }}Notice that the data added to the collection is not in any particular order. Create a Windows Phone page and add two XML namespaces to the Page.xmlns:scm="clr-namespace:System.ComponentModel;assembly=System.Windows"xmlns:local="clr-namespace:WPSortData"The 'local' namespace is an alias to the name of the project that you created (in this case WPSortData). The 'scm' namespace references the System.Windows.dll and is needed for the SortDescription class that you will use for sorting the data. Create a phone:PhoneApplicationPage.Resources section in your Windows Phone page that looks like the following:<phone:PhoneApplicationPage.Resources>  <local:Products x:Key="products" />  <CollectionViewSource x:Key="prodCollection"      Source="{Binding Source={StaticResource products},                       Path=DataCollection}">    <CollectionViewSource.SortDescriptions>      <scm:SortDescription PropertyName="ProductName"                           Direction="Ascending" />    </CollectionViewSource.SortDescriptions>  </CollectionViewSource></phone:PhoneApplicationPage.Resources>The first line of code in the resources section creates an instance of your Products class. The constructor of the Products class calls the InitCollection method which creates three Product objects and adds them to the DataCollection property of the Products class. Once the Products object is instantiated you now add a CollectionViewSource object in XAML using the Products object as the source of the data to this collection. A CollectionViewSource has a SortDescriptions collection that allows you to specify a set of SortDescription objects. Each object can set a PropertyName and a Direction property. As you see in the above code you set the PropertyName equal to the ProductName property of the Product object and tell it to sort in an Ascending direction.All you have to do now is to create a ListBox control and set its ItemsSource property to the CollectionViewSource object. The ListBox displays the data in sorted order by ProductName and you did not have to write any LINQ queries or write other code to sort the data!<ListBox    ItemsSource="{Binding Source={StaticResource prodCollection}}"   DisplayMemberPath="ProductName" />SummaryIn this blog post you learned that you can sort any data without having to change the source code of where the data comes from. Simply feed the data into a CollectionViewSource in XAML and set some sort descriptions in XAML and the rest is done for you! This comes in very handy when you are consuming data from a source where the data is given to you and you do not have control over the sorting.NOTE: You can download this article and many samples like the one shown in this blog entry at my website. http://www.pdsa.com/downloads. Select “Tips and Tricks”, then “Sort Data in Windows Phone using Collection View Source” from the drop down list.Good Luck with your Coding,Paul Sheriff** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

  Read the article

• SSIS: Building SQL databases on-the-fly using concatenated SQL scripts

  - by DrJohn

  Over the years I have developed many techniques which help automate the whole SQL Server build process. In my current process, where I need to build entire OLAP data marts on-the-fly, I make regular use of a simple but very effective mechanism to concatenate all the SQL Scripts together from my SSMS (SQL Server Management Studio) projects. This proves invaluable because in two clicks I can redeploy an entire SQL Server database with all tables, views, stored procedures etc. Indeed, I can also use the concatenated SQL scripts with SSIS to build SQL Server databases on-the-fly. You may be surprised to learn that I often redeploy the database several times per day, or even several times per hour, during the development process. This is because the deployment errors are logged and you can quickly see where SQL Scripts have object dependency errors. For example, after changing a table structure you may have forgotten to change any related views. The deployment log immediately points out all the objects which failed to build so you can fix and redeploy the database very quickly. The alternative approach (i.e. doing changes in the database directly using the SSMS UI) would require you to check all dependent objects before making changes. The chances are that you will miss something and wonder why your app returns the wrong data – a common problem caused by changing a table without re-creating dependent views. Using SQL Projects in SSMS A great many developers fail to make use of SQL Projects in SSMS (SQL Server Management Studio). To me they are invaluable way of organizing your SQL Scripts. The screenshot below shows a typical SSMS solution made up of several projects – one project for tables, another for views etc. The key point is that the projects naturally fall into the right order in file system because of the project name. The number in the folder or file name ensures that the projects the SQL scripts are concatenated together in the order that they need to be executed. Hence the script filenames start with 100, 110 etc. Concatenating SQL Scripts To concatenate the SQL Scripts together into one file, I use notepad.exe to create a simple batch file (see example screenshot) which uses the TYPE command to write the content of the SQL Script files into a combined file. As the SQL Scripts are in several folders, I simply use several TYPE command multiple times and append the output together. If you are unfamiliar with batch files, you may not know that the angled bracket (>) means write output of the program into a file. Two angled brackets (>>) means append output of this program into a file. So the command-line DIR > filelist.txt would write the content of the DIR command into a file called filelist.txt. In the example shown above, the concatenated file is called SB_DDS.sql If, like me you place the concatenated file under source code control, then the source code control system will change the file's attribute to "read-only" which in turn would cause the TYPE command to fail. The ATTRIB command can be used to remove the read-only flag. Using SQLCmd to execute the concatenated file Now that the SQL Scripts are all in one big file, we can execute the script against a database using SQLCmd using another batch file as shown below: SQLCmd has numerous options, but the script shown above simply executes the SS_DDS.sql file against the SB_DDS_DB database on the local machine and logs the errors to a file called SB_DDS.log. So after executing the batch file you can simply check the error log to see if your database built without a hitch. If you have errors, then simply fix the source files, re-create the concatenated file and re-run the SQLCmd to rebuild the database. This two click operation allows you to quickly identify and fix errors in your entire database definition.Using SSIS to execute the concatenated file To execute the concatenated SQL script using SSIS, you simply drop an Execute SQL task into your package and set the database connection as normal and then select File Connection as the SQLSourceType (as shown below). Create a file connection to your concatenated SQL script and you are ready to go.   Tips and TricksAdd a new-line at end of every fileThe most common problem encountered with this approach is that the GO statement on the last line of one file is placed on the same line as the comment at the top of the next file by the TYPE command. The easy fix to this is to ensure all your files have a new-line at the end.Remove all USE database statementsThe SQLCmd identifies which database the script should be run against.  So you should remove all USE database commands from your scripts - otherwise you may get unintentional side effects!!Do the Create Database separatelyIf you are using SSIS to create the database as well as create the objects and populate the database, then invoke the CREATE DATABASE command against the master database using a separate package before calling the package that executes the concatenated SQL script.    

  Read the article

• C#/.NET Little Wonders: Static Char Methods

  - by James Michael Hare

  Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. Often times in our code we deal with the bigger classes and types in the BCL, and occasionally forgot that there are some nice methods on the primitive types as well.  Today we will discuss some of the handy static methods that exist on the char (the C# alias of System.Char) type. The Background I was examining a piece of code this week where I saw the following: 1: // need to get the 5th (offset 4) character in upper case 2: var type = symbol.Substring(4, 1).ToUpper(); 3:  4: // test to see if the type is P 5: if (type == "P") 6: { 7: // ... do something with P type... 8: } Is there really any error in this code?  No, but it still struck me wrong because it is allocating two very short-lived throw-away strings, just to store and manipulate a single char: The call to Substring() generates a new string of length 1 The call to ToUpper() generates a new upper-case version of the string from Step 1. In my mind this is similar to using ToUpper() to do a case-insensitive compare: it isn’t wrong, it’s just much heavier than it needs to be (for more info on case-insensitive compares, see #2 in 5 More Little Wonders). One of my favorite books is the C++ Coding Standards: 101 Rules, Guidelines, and Best Practices by Sutter and Alexandrescu.  True, it’s about C++ standards, but there’s also some great general programming advice in there, including two rules I love:         8. Don’t Optimize Prematurely         9. Don’t Pessimize Prematurely We all know what #8 means: don’t optimize when there is no immediate need, especially at the expense of readability and maintainability.  I firmly believe this and in the axiom: it’s easier to make correct code fast than to make fast code correct.  Optimizing code to the point that it becomes difficult to maintain often gains little and often gives you little bang for the buck. But what about #9?  Well, for that they state: “All other things being equal, notably code complexity and readability, certain efficient design patterns and coding idioms should just flow naturally from your fingertips and are no harder to write then the pessimized alternatives. This is not premature optimization; it is avoiding gratuitous pessimization.” Or, if I may paraphrase: “where it doesn’t increase the code complexity and readability, prefer the more efficient option”. The example code above was one of those times I feel where we are violating a tacit C# coding idiom: avoid creating unnecessary temporary strings.  The code creates temporary strings to hold one char, which is just unnecessary.  I think the original coder thought he had to do this because ToUpper() is an instance method on string but not on char.  What he didn’t know, however, is that ToUpper() does exist on char, it’s just a static method instead (though you could write an extension method to make it look instance-ish). This leads me (in a long-winded way) to my Little Wonders for the day… Static Methods of System.Char So let’s look at some of these handy, and often overlooked, static methods on the char type: IsDigit(), IsLetter(), IsLetterOrDigit(), IsPunctuation(), IsWhiteSpace() Methods to tell you whether a char (or position in a string) belongs to a category of characters. IsLower(), IsUpper() Methods that check if a char (or position in a string) is lower or upper case ToLower(), ToUpper() Methods that convert a single char to the lower or upper equivalent. For example, if you wanted to see if a string contained any lower case characters, you could do the following: 1: if (symbol.Any(c => char.IsLower(c))) 2: { 3: // ... 4: } Which, incidentally, we could use a method group to shorten the expression to: 1: if (symbol.Any(char.IsLower)) 2: { 3: // ... 4: } Or, if you wanted to verify that all of the characters in a string are digits: 1: if (symbol.All(char.IsDigit)) 2: { 3: // ... 4: } Also, for the IsXxx() methods, there are overloads that take either a char, or a string and an index, this means that these two calls are logically identical: 1: // check given a character 2: if (char.IsUpper(symbol[0])) { ... } 3:  4: // check given a string and index 5: if (char.IsUpper(symbol, 0)) { ... } Obviously, if you just have a char, then you’d just use the first form.  But if you have a string you can use either form equally well. As a side note, care should be taken when examining all the available static methods on the System.Char type, as some seem to be redundant but actually have very different purposes.  For example, there are IsDigit() and IsNumeric() methods, which sound the same on the surface, but give you different results. IsDigit() returns true if it is a base-10 digit character (‘0’, ‘1’, … ‘9’) where IsNumeric() returns true if it’s any numeric character including the characters for ½, ¼, etc. Summary To come full circle back to our opening example, I would have preferred the code be written like this: 1: // grab 5th char and take upper case version of it 2: var type = char.ToUpper(symbol[4]); 3:  4: if (type == 'P') 5: { 6: // ... do something with P type... 7: } Not only is it just as readable (if not more so), but it performs over 3x faster on my machine:    1,000,000 iterations of char method took: 30 ms, 0.000050 ms/item.    1,000,000 iterations of string method took: 101 ms, 0.000101 ms/item. It’s not only immediately faster because we don’t allocate temporary strings, but as an added bonus there less garbage to collect later as well.  To me this qualifies as a case where we are using a common C# performance idiom (don’t create unnecessary temporary strings) to make our code better. Technorati Tags: C#,CSharp,.NET,Little Wonders,char,string

  Read the article

• Writing an ASP.Net Web based TFS Client

  - by Glav

  So one of the things I needed to do was write an ASP.Net MVC based application for our senior execs to manage a set of arbitrary attributes against stories, bugs etc to be able to attribute whether the item was related to Research and Development, and if so, what kind. We are using TFS Azure and don’t have the option of custom templates. I have decided on using a string based field within the template that is not very visible and which we don’t use to write a small set of custom which will determine the research and development association. However, this string munging on the field is not very user friendly so we need a simple tool that can display attributes against items in a simple dropdown list or something similar. Enter a custom web app that accesses our TFS items in Azure (Note: We are also using Visual Studio 2012) Now TFS Azure uses your Live ID and it is not really possible to easily do this in a server based app where no interaction is available. Even if you capture the Live ID credentials yourself and try to submit them to TFS Azure, it wont work. Bottom line is that it is not straightforward nor obvious what you have to do. In fact, it is a real pain to find and there are some answers out there which don’t appear to be answers at all given they didn’t work in my scenario. So for anyone else who wants to do this, here is a simple breakdown on what you have to do: Go here and get the “TFS Service Credential Viewer”. Install it, run it and connect to your TFS instance in azure and create a service account. Note the username and password exactly as it presents it to you. This is the magic identity that will allow unattended, programmatic access. Without this step, don’t bother trying to do anything else. In your MVC app, reference the following assemblies from “C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\ReferenceAssemblies\v2.0”: Microsoft.TeamFoundation.Client.dll Microsoft.TeamFoundation.Common.dll Microsoft.TeamFoundation.VersionControl.Client.dll Microsoft.TeamFoundation.VersionControl.Common.dll Microsoft.TeamFoundation.WorkItemTracking.Client.DataStoreLoader.dll Microsoft.TeamFoundation.WorkItemTracking.Client.dll Microsoft.TeamFoundation.WorkItemTracking.Common.dll If hosting this in Internet Information Server, for the application pool this app runs under, you will need to enable 32 Bit support. You also have to allow the TFS client assemblies to store a cache of files on your system. If you don’t do this, you will authenticate fine, but then get an exception saying that it is unable to access the cache at some directory path when you query work items. You can set this up by adding the following to your web.config, in the <appSettings> element as shown below: <appSettings> <!-- Add reference to TFS Client Cache --> <add key="WorkItemTrackingCacheRoot" value="C:\windows\temp" /> </appSettings> With all that in place, you can write the following code: var token = new Microsoft.TeamFoundation.Client.SimpleWebTokenCredential("{you-service-account-name", "{your-service-acct-password}"); var clientCreds = new Microsoft.TeamFoundation.Client.TfsClientCredentials(token); var currentCollection = new TfsTeamProjectCollection(new Uri(“https://{yourdomain}.visualstudio.com/defaultcollection”), clientCreds); TfsConfigurationServercurrentCollection.EnsureAuthenticated(); In the above code, not the URL contains the “defaultcollection” at the end of the URL. Obviously replace {yourdomain} with whatever is defined for your TFS in Azure instance. In addition, make sure the service user account and password that was generated in the first step is substituted in here. Note: If something is not right, the “EnsureAuthenticated()” call will throw an exception with the message being you are not authorised. If you forget the “defaultcollection” on the URL, it will still fail but with a message saying you are not authorised. That is, a similar but different exception message. And that is it. You can then query the collection using something like: var service = currentCollection.GetService<WorkItemStore>(); var proj = service.Projects[0]; var allQueries = proj.StoredQueries; for (int qcnt = 0; qcnt < allQueries.Count; qcnt++) {     var query = allQueries[qcnt];     var queryDesc = string.format(“Query found named: {0}”,query.Name); } You get the idea. If you search around, you will find references to the ServiceIdentityCredentialProvider which is referenced in this article. I had no luck with this method and it all looked too hard since it required an extra KB article and other magic sauce. So I hope that helps. This article certainly would have helped me save a boat load of time and frustration.

  Read the article

• My Red Gate Experience

  - by Colin Rothwell

  I’m Colin, and I’ve been an intern working with Mike in publishing on Simple-Talk and SQLServerCentral for the past ten weeks. I’ve mostly been working “behind the scenes”, making improvements to the spam filtering, along with various other small tweaks. When I arrived at Red Gate, one of the first things Mike asked me was what I wanted to get out of the internship. It wasn’t a question I’d given a great deal of thought to, but my immediate response was the same as almost anybody: to support my growing family. Well, ok, not quite that, but money was certainly a motivator, along with simply making sure that I didn’t get bored over the summer. Three months is a long time to fill, and many of my friends end up getting bored, or worse, knitting obsessively. With the arrogance which seems fairly common among Cambridge people, I wasn’t expecting to really learn much here! In my mind, the part of the year where I am at Uni is the part where I learn things, whilst Red Gate would be an opportunity to apply what I’d learnt. Thankfully, the opposite is true: I’ve learnt a lot during my time here, and there has been a definite positive impact on the way I write code. The first thing I’ve really learnt is that test-driven development is, in general, a sensible way of working. Before coming, I didn’t really get it: how could you test something you hadn’t yet written? It didn’t make sense! My problem was seeing a test as having to test all the behaviour of a given function. Writing tests which test the bare minimum possible and building them up is a really good way of crystallising the direction the code needs to grow in, and ensures you never attempt to write too much code at time. One really good experience of this was early on in my internship when Mike and I were working on the query used to list active authors: I’d written something which I thought would do the trick, but by starting again using TDD we grew something which revealed that there were several subtle mistakes in the query I’d written. I’ve also been awakened to the value of pair programming. Whilst I could sort of see the point before coming, I also thought that it was impossible that two people would ever get more done at the same computer than if they were working separately. I still think that this is true for projects with pieces that developers can easily work on independently, and with developers who both know the codebase, but I’ve found that pair programming can be really good for learning a code base, and for building up small projects to the point where you can start working on separate components, as well as solving particularly difficult problems. Later on in my internship, for my down tools week project, I was working on adding Python support to Glimpse. Another intern and I we pair programmed the entire project, using ping pong pair programming as much as possible. One bonus that this brought which I wasn’t expecting was that I found myself less prone to distraction: with someone else peering over my shoulder, I didn’t have the ever-present temptation to open gmail, or facebook, or yammer, or twitter, or hacker news, or reddit, and so on, and so forth. I’m quite proud of this project: I think it’s some of the best code I’ve written. I’ve also been really won over to the value of descriptive variables names. In my pre-Red Gate life, as a lone-ranger style cowboy programmer, I’d developed a tendency towards laziness in variable names, sometimes abbreviating or, worse, using acronyms. I’ve swiftly realised that this is a bad idea when working with a team: saving a few key strokes is inevitably not worth it when it comes to reading code again in the future. Longer names also mean you can do away with a majority of comments. I appreciate that if you’ve come up with an O(n*log n) algorithm for something which seemed O(n^2), you probably want to explain how it works, but explaining what a variable name means is a big no no: it’s so very easy to change the behaviour of the code, whilst forgetting about the comments. Whilst at Red Gate, I took the opportunity to attend a code retreat, which really helped me to solidify all the things I’d learnt. To be completely free of any existing code base really lets you focus on best practises and think about how you write code. If you get a chance to go on a similar event, I’d highly recommend it! Cycling to Red Gate, I’ve also become much better at fitting inner tubes: if you’re struggling to get the tube out, or re-fit the tire, letting a bit of air out usually helps. I’ve also become quite a bit better at foosball and will miss having a foosball table! I’d like to finish off by saying thank you to everyone at Red Gate for having me. I’ve really enjoyed working with, and learning from, the team that brings you this web site. If you meet any of them, buy them a drink!

  Read the article

• Caveat utilitor - Can I run two versions of Microsoft Project side-by-side?

  - by Martin Hinshelwood

  A number of out customers have asked if there are any problems in installing and running multiple versions of Microsoft Project on a single client. Although this is a case of Caveat utilitor (Let the user beware), as long as the user understands and accepts the issues that can occur then they can do this. Although Microsoft provide the ability to leave old versions of Office products (except Outlook) on your client when you are installing a new version of the product they certainly do not endorse doing so. Figure: For Project you can choose to keep the old stuff   That being the case I would have preferred that they put a “(NOT RECOMMENDED)” after the options to impart that knowledge to the rest of us, but they did not. The default and recommended behaviour is for the newer version installer to remove the older versions. Of course this does not apply in the revers. There are no forward compatibility packs for Office. There are a number of negative behaviours (or bugs) that can occur in this configuration: There is only one MS Project In Windows a file extension can only be associated with a single program.  In this case, MPP files can be associated with only one version of winproj.exe.  The executables are in different folders so if a user double-clicks a Project file on the desktop, file explorer, or Outlook email, Windows will launch the winproj.exe associated with MPP and then load the MPP file.  There are problems associated with this situation and in some cases workarounds. The user double-clicks on a Project 2010 file, Project 2007 launches but is unable to open the file because it is a newer version.  The workaround is for the user to launch Project 2010 from the Start menu then open the file.  If the file is attached to an email they will need to first drag the file to the desktop. All your linked MS Project files need to be of the same version There are a number of problems that occur when people use on Microsoft’s Object Linking and Embedding (OLE) technology.  The three common uses of OLE are: for inserted projects where a Master project contains sub-projects and each sub-project resides in its own MPP file shared resource pools where multiple MPP files share a common resource pool kept in a single MPP file cross-project links where a task or milestone in one MPP file has a  predecessor/successor relationship with a task or milestone in a different MPP file What I’ve seen happen before is that if you are running in a version of Project that is not associated with the MPP extension and then try and activate an OLE link then Project tries to launch the other version of Project.  Things start getting very confused since different MPP files are being controlled by different versions of Project running at the same time.  I haven’t tried this in awhile so I can’t give you exact symptoms but I suspect that if Project 2010 is involved the symptoms will be different then in a Project 2003/2007 scenario.  I’ve noticed that Project 2010 gives different error messages for the exact same problem when it occurs in Project 2003 or 2007.  -Anonymous The recommendation would be either not to use this feature if you have to have multiple versions of Project installed or to use only a single version of Project. You may get unexpected negative behaviours if you are using shared resource pools or resource pools even when you are not running multiple versions as I have found that they can get broken very easily. If you need these thing then it is probably best to use Project Server as it was created to solve many of these specific issues. Note: I would not even allow multiple people to access a network copy of a Project file because of the way Windows locks files in write mode. This can cause write-locks that get so bad a server restart is required I’ve seen user’s files get write-locked to the point where the only resolution is to reboot the server. Changing the default version to run for an extension So what if you want to change the default association from Project 2007 to Project 2010?   Figure: “Control Panel | Folder Options | Change the file associated with a file extension” Windows normally only lists the last version installed for a particular extension. You can select a specific version by selecting the program you want to change and clicking “Change program… | Browse…” and then selecting the .exe you want to use on the file system. Figure: You will need to select the exact version of “winproj.exe” that you want to run Conclusion Although it is possible to run multiple versions of Project on one system in the main it does not really make sense.

  Read the article

• External USB 3 drive not recognized

  - by ilan123

  Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

  Read the article

• Session Report - Modern Software Development Anti-Patterns

  - by Janice J. Heiss

  In this standing-room-only session, building upon his 2011 JavaOne Rock Star “Diabolical Developer” session, Martijn Verburg, this time along with Ben Evans, identified and explored common “anti-patterns” – ways of doing things that keep developers from doing their best work. They emphasized the importance of social interaction and team communication, along with identifying certain psychological pitfalls that lead developers astray. Their emphasis was less on technical coding errors and more how to function well and to keep one’s focus on what really matters. They are the authors of the highly regarded The Well-Grounded Java Developer and are both movers and shakers in the London JUG community and on the Java Community Process. The large room was packed as they gave a fast-moving, witty presentation with lots of laughs and personal anecdotes. Below are a few of the anti-patterns they discussed.Anti-Pattern One: Conference-Driven DeliveryThe theme here is the belief that “Real pros hack code and write their slides minutes before their talks.” Their response to this anti-pattern is an expression popular in the military – PPPPPP, which stands for, “Proper preparation prevents piss-poor performance.”“Communication is very important – probably more important than the code you write,” claimed Verburg. “The more you speak in front of large groups of people the easier it gets, but it’s always important to do dry runs, to present to smaller groups. And important to be members of user groups where you can give presentations. It’s a great place to practice speaking skills; to gain new skills; get new contacts, to network.”They encouraged attendees to record themselves and listen to themselves giving a presentation. They advised them to start with a spouse or friends if need be. Learning to communicate to a group, they argued, is essential to being a successful developer. The emphasis here is that software development is a team activity and good, clear, accessible communication is essential to the functioning of software teams. Anti-Pattern Two: Mortgage-Driven Development The main theme here was that, in a period of worldwide recession and economic stagnation, people are concerned about keeping their jobs. So there is a tendency for developers to treat knowledge as power and not share what they know about their systems with their colleagues, so when it comes time to fix a problem in production, they will be the only one who knows how to fix it – and will have made themselves an indispensable cog in a machine so you cannot be fired. So developers avoid documentation at all costs, or if documentation is required, put it on a USB chip and lock it in a lock box. As in the first anti-pattern, the idea here is that communicating well with your colleagues is essential and documentation is a key part of this. Social interactions are essential. Both Verburg and Evans insisted that increasingly, year by year, successful software development is more about communication than the technical aspects of the craft. Developers who understand this are the ones who will have the most success. Anti-Pattern Three: Distracted by Shiny – Always Use the Latest Technology to Stay AheadThe temptation here is to pick out some obscure framework, try a bit of Scala, HTML5, and Clojure, and always use the latest technology and upgrade to the latest point release of everything. Don’t worry if something works poorly because you are ahead of the curve. Verburg and Evans insisted that there need to be sound reasons for everything a developer does. Developers should not bring in something simply because for some reason they just feel like it or because it’s new. They recommended a site run by a developer named Matt Raible with excellent comparison spread sheets regarding Web frameworks and other apps. They praised it as a useful tool to help developers in their decision-making processes. They pointed out that good developers sometimes make bad choices out of boredom, to add shiny things to their CV, out of frustration with existing processes, or just from a lack of understanding. They pointed out that some code may stay in a business system for 15 or 20 years, but not all code is created equal and some may change after 3 or 6 months. Developers need to know where the code they are contributing fits in. What is its likely lifespan? Anti-Pattern Four: Design-Driven Design The anti-pattern: If you want to impress your colleagues and bosses, use design patents left, right, and center – MVC, Session Facades, SOA, etc. Or the UML modeling suite from IBM, back in the day… Generate super fast code. And the more jargon you can talk when in the vicinity of the manager the better.Verburg shared a true story about a time when he was interviewing a guy for a job and asked him what his previous work was. The interviewee said that he essentially took patterns and uses an approved book of Enterprise Architecture Patterns and applied them. Verburg was dumbstruck that someone could have a job in which they took patterns from a book and applied them. He pointed out that the idea that design is a separate activity is simply wrong. He repeated a saying that he uses, “You should pay your junior developers for the lines of code they write and the things they add; you should pay your senior developers for what they take away.”He explained that by encouraging people to take things away, the code base gets simpler and reflects the actual business use cases developers are trying to solve, as opposed to the framework that is being imposed. He told another true story about a project to decommission a very long system. 98% of the code was decommissioned and people got a nice bonus. But the 2% remained on the mainframe so the 98% reduction in code resulted in zero reduction in costs, because the entire mainframe was needed to run the 2% that was left. There is an incentive to get rid of source code and subsystems when they are no longer needed. The session continued with several more anti-patterns that were equally insightful.

  Read the article

• C#/.NET Little Wonders: Getting Caller Information

  - by James Michael Hare

  Originally posted on: http://geekswithblogs.net/BlackRabbitCoder/archive/2013/07/25/c.net-little-wonders-getting-caller-information.aspx Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. There are times when it is desirable to know who called the method or property you are currently executing.  Some applications of this could include logging libraries, or possibly even something more advanced that may server up different objects depending on who called the method. In the past, we mostly relied on the System.Diagnostics namespace and its classes such as StackTrace and StackFrame to see who our caller was, but now in C# 5, we can also get much of this data at compile-time. Determining the caller using the stack One of the ways of doing this is to examine the call stack.  The classes that allow you to examine the call stack have been around for a long time and can give you a very deep view of the calling chain all the way back to the beginning for the thread that has called you. You can get caller information by either instantiating the StackTrace class (which will give you the complete stack trace, much like you see when an exception is generated), or by using StackFrame which gets a single frame of the stack trace.  Both involve examining the call stack, which is a non-trivial task, so care should be done not to do this in a performance-intensive situation. For our simple example let's say we are going to recreate the wheel and construct our own logging framework.  Perhaps we wish to create a simple method Log which will log the string-ified form of an object and some information about the caller.  We could easily do this as follows: 1: static void Log(object message) 2: { 3: // frame 1, true for source info 4: StackFrame frame = new StackFrame(1, true); 5: var method = frame.GetMethod(); 6: var fileName = frame.GetFileName(); 7: var lineNumber = frame.GetFileLineNumber(); 8: 9: // we'll just use a simple Console write for now 10: Console.WriteLine("{0}({1}):{2} - {3}", 11: fileName, lineNumber, method.Name, message); 12: } So, what we are doing here is grabbing the 2nd stack frame (the 1st is our current method) using a 2nd argument of true to specify we want source information (if available) and then taking the information from the frame.  This works fine, and if we tested it out by calling from a file such as this: 1: // File c:\projects\test\CallerInfo\CallerInfo.cs 2:  3: public class CallerInfo 4: { 5: Log("Hello Logger!"); 6: } We'd see this: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! This works well, and in fact CallStack and StackFrame are still the best ways to examine deeper into the call stack.  But if you only want to get information on the caller of your method, there is another option… Determining the caller at compile-time In C# 5 (.NET 4.5) they added some attributes that can be supplied to optional parameters on a method to receive caller information.  These attributes can only be applied to methods with optional parameters with explicit defaults.  Then, as the compiler determines who is calling your method with these attributes, it will fill in the values at compile-time. These are the currently supported attributes available in the  System.Runtime.CompilerServices namespace": CallerFilePathAttribute – The path and name of the file that is calling your method. CallerLineNumberAttribute – The line number in the file where your method is being called. CallerMemberName – The member that is calling your method. So let’s take a look at how our Log method would look using these attributes instead: 1: static int Log(object message, 2: [CallerMemberName] string memberName = "", 3: [CallerFilePath] string fileName = "", 4: [CallerLineNumber] int lineNumber = 0) 5: { 6: // we'll just use a simple Console write for now 7: Console.WriteLine("{0}({1}):{2} - {3}", 8: fileName, lineNumber, memberName, message); 9: } Again, calling this from our sample Main would give us the same result: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! However, though this seems the same, there are a few key differences. First of all, there are only 3 supported attributes (at this time) that give you the file path, line number, and calling member.  Thus, it does not give you as rich of detail as a StackFrame (which can give you the calling type as well and deeper frames, for example).  Also, these are supported through optional parameters, which means we could call our new Log method like this: 1: // They're defaults, why not fill 'em in 2: Log("My message.", "Some member", "Some file", -13); In addition, since these attributes require optional parameters, they cannot be used in properties, only in methods. These caveats aside, they do let you get similar information inside of methods at a much greater speed!  How much greater?  Well lets crank through 1,000,000 iterations of each.  instead of logging to console, I’ll return the formatted string length of each.  Doing this, we get: 1: Time for 1,000,000 iterations with StackTrace: 5096 ms 2: Time for 1,000,000 iterations with Attributes: 196 ms So you see, using the attributes is much, much faster!  Nearly 25x faster in fact.  Summary There are a few ways to get caller information for a method.  The StackFrame allows you to get a comprehensive set of information spanning the whole call stack, but at a heavier cost.  On the other hand, the attributes allow you to quickly get at caller information baked in at compile-time, but to do so you need to create optional parameters in your methods to support it. Technorati Tags: Little Wonders,CSharp,C#,.NET,StackFrame,CallStack,CallerFilePathAttribute,CallerLineNumberAttribute,CallerMemberName

  Read the article

• A Basic Thread

  - by Joe Mayo

  Most of the programs written are single-threaded, meaning that they run on the main execution thread. For various reasons such as performance, scalability, and/or responsiveness additional threads can be useful. .NET has extensive threading support, from the basic threads introduced in v1.0 to the Task Parallel Library (TPL) introduced in v4.0. To get started with threads, it's helpful to begin with the basics; starting a Thread. Why Do I Care? The scenario I'll use for needing to use a thread is writing to a file.  Sometimes, writing to a file takes a while and you don't want your user interface to lock up until the file write is done. In other words, you want the application to be responsive to the user. How Would I Go About It? The solution is to launch a new thread that performs the file write, allowing the main thread to return to the user right away.  Whenever the file writing thread completes, it will let the user know.  In the meantime, the user is free to interact with the program for other tasks. The following examples demonstrate how to do this. Show Me the Code? The code we'll use to work with threads is in the System.Threading namespace, so you'll need the following using directive at the top of the file: using System.Threading; When you run code on a thread, the code is specified via a method.  Here's the code that will execute on the thread: private static void WriteFile() { Thread.Sleep(1000); Console.WriteLine("File Written."); } The call to Thread.Sleep(1000) delays thread execution. The parameter is specified in milliseconds, and 1000 means that this will cause the program to sleep for approximately 1 second.  This method happens to be static, but that's just part of this example, which you'll see is launched from the static Main method.  A thread could be instance or static.  Notice that the method does not have parameters and does not have a return type. As you know, the way to refer to a method is via a delegate.  There is a delegate named ThreadStart in System.Threading that refers to a method without parameters or return type, shown below: ThreadStart fileWriterHandlerDelegate = new ThreadStart(WriteFile); I'll show you the whole program below, but the ThreadStart instance above goes in the Main method. The thread uses the ThreadStart instance, fileWriterHandlerDelegate, to specify the method to execute on the thread: Thread fileWriter = new Thread(fileWriterHandlerDelegate); As shown above, the argument type for the Thread constructor is the ThreadStart delegate type. The fileWriterHandlerDelegate argument is an instance of the ThreadStart delegate type. This creates an instance of a thread and what code will execute, but the new thread instance, fileWriter, isn't running yet. You have to explicitly start it, like this: fileWriter.Start(); Now, the code in the WriteFile method is executing on a separate thread. Meanwhile, the main thread that started the fileWriter thread continues on it's own.  You have two threads running at the same time. Okay, I'm Starting to Get Glassy Eyed. How Does it All Fit Together? The example below is the whole program, pulling all the previous bits together. It's followed by its output and an explanation. using System; using System.Threading; namespace BasicThread { class Program { static void Main() { ThreadStart fileWriterHandlerDelegate = new ThreadStart(WriteFile); Thread fileWriter = new Thread(fileWriterHandlerDelegate); Console.WriteLine("Starting FileWriter"); fileWriter.Start(); Console.WriteLine("Called FileWriter"); Console.ReadKey(); } private static void WriteFile() { Thread.Sleep(1000); Console.WriteLine("File Written"); } } } And here's the output: Starting FileWriter Called FileWriter File Written So, Why are the Printouts Backwards? The output above corresponds to Console.Writeline statements in the program, with the second and third seemingly reversed. In a single-threaded program, "File Written" would print before "Called FileWriter". However, this is a multi-threaded (2 or more threads) program.  In multi-threading, you can't make any assumptions about when a given thread will run.  In this case, I added the Sleep statement to the WriteFile method to greatly increase the chances that the message from the main thread will print first. Without the Thread.Sleep, you could run this on a system with multiple cores and/or multiple processors and potentially get different results each time. Interesting Tangent but What Should I Get Out of All This? Going back to the main point, launching the WriteFile method on a separate thread made the program more responsive.  The file writing logic ran for a while, but the main thread returned to the user, as demonstrated by the print out of "Called FileWriter".  When the file write finished, it let the user know via another print statement. This was a very efficient use of CPU resources that made for a more pleasant user experience. Joe

  Read the article

• Null Values And The T-SQL IN Operator

  - by Jesse

  I came across some unexpected behavior while troubleshooting a failing test the other day that took me long enough to figure out that I thought it was worth sharing here. I finally traced the failing test back to a SELECT statement in a stored procedure that was using the IN t-sql operator to exclude a certain set of values. Here’s a very simple example table to illustrate the issue: Customers CustomerId INT, NOT NULL, Primary Key CustomerName nvarchar(100) NOT NULL SalesRegionId INT NULL   The ‘SalesRegionId’ column contains a number representing the sales region that the customer belongs to. This column is nullable because new customers get created all the time but assigning them to sales regions is a process that is handled by a regional manager on a periodic basis. For the purposes of this example, the Customers table currently has the following rows: CustomerId CustomerName SalesRegionId 1 Customer A 1 2 Customer B NULL 3 Customer C 4 4 Customer D 2 5 Customer E 3   How could we write a query against this table for all customers that are NOT in sales regions 2 or 4? You might try something like this: 1: SELECT 2: CustomerId, 3: CustomerName, 4: SalesRegionId 5: FROM Customers 6: WHERE SalesRegionId NOT IN (2,4)   Will this work? In short, no; at least not in the way that you might expect. Here’s what this query will return given the example data we’re working with: CustomerId CustomerName SalesRegionId 1 Customer A 1 5 Customer E 5   I was expecting that this query would also return ‘Customer B’, since that customer has a NULL SalesRegionId. In my mind, having a customer with no sales region should be included in a set of customers that are not in sales regions 2 or 4.When I first started troubleshooting my issue I made note of the fact that this query should probably be re-written without the NOT IN clause, but I didn’t suspect that the NOT IN clause was actually the source of the issue. This particular query was only one minor piece in a much larger process that was being exercised via an automated integration test and I simply made a poor assumption that the NOT IN would work the way that I thought it should. So why doesn’t this work the way that I thought it should? From the MSDN documentation on the t-sql IN operator: If the value of test_expression is equal to any value returned by subquery or is equal to any expression from the comma-separated list, the result value is TRUE; otherwise, the result value is FALSE. Using NOT IN negates the subquery value or expression. The key phrase out of that quote is, “… is equal to any expression from the comma-separated list…”. The NULL SalesRegionId isn’t included in the NOT IN because of how NULL values are handled in equality comparisons. From the MSDN documentation on ANSI_NULLS: The SQL-92 standard requires that an equals (=) or not equal to (<>) comparison against a null value evaluates to FALSE. When SET ANSI_NULLS is ON, a SELECT statement using WHERE column_name = NULL returns zero rows even if there are null values in column_name. A SELECT statement using WHERE column_name <> NULL returns zero rows even if there are nonnull values in column_name. In fact, the MSDN documentation on the IN operator includes the following blurb about using NULL values in IN sub-queries or expressions that are used with the IN operator: Any null values returned by subquery or expression that are compared to test_expression using IN or NOT IN return UNKNOWN. Using null values in together with IN or NOT IN can produce unexpected results. If I were to include a ‘SET ANSI_NULLS OFF’ command right above my SELECT statement I would get ‘Customer B’ returned in the results, but that’s definitely not the right way to deal with this. We could re-write the query to explicitly include the NULL value in the WHERE clause: 1: SELECT 2: CustomerId, 3: CustomerName, 4: SalesRegionId 5: FROM Customers 6: WHERE (SalesRegionId NOT IN (2,4) OR SalesRegionId IS NULL)   This query works and properly includes ‘Customer B’ in the results, but I ultimately opted to re-write the query using a LEFT OUTER JOIN against a table variable containing all of the values that I wanted to exclude because, in my case, there could potentially be several hundred values to be excluded. If we were to apply the same refactoring to our simple sales region example we’d end up with: 1: DECLARE @regionsToIgnore TABLE (IgnoredRegionId INT) 2: INSERT @regionsToIgnore values (2),(4) 3:  4: SELECT 5: c.CustomerId, 6: c.CustomerName, 7: c.SalesRegionId 8: FROM Customers c 9: LEFT OUTER JOIN @regionsToIgnore r ON r.IgnoredRegionId = c.SalesRegionId 10: WHERE r.IgnoredRegionId IS NULL By performing a LEFT OUTER JOIN from Customers to the @regionsToIgnore table variable we can simply exclude any rows where the IgnoredRegionId is null, as those represent customers that DO NOT appear in the ignored regions list. This approach will likely perform better if the number of sales regions to ignore gets very large and it also will correctly include any customers that do not yet have a sales region.

  Read the article

• Why bother writing an Windows 8 app?

  - by Dennis Vroegop

  So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

  Read the article

• Using XA Transactions in Coherence-based Applications

  - by jpurdy

  While the costs of XA transactions are well known (e.g. increased data contention, higher latency, significant disk I/O for logging, availability challenges, etc.), in many cases they are the most attractive option for coordinating logical transactions across multiple resources. There are a few common approaches when integrating Coherence into applications via the use of an application server's transaction manager: Use of Coherence as a read-only cache, applying transactions to the underlying database (or any system of record) instead of the cache. Use of TransactionMap interface via the included resource adapter. Use of the new ACID transaction framework, introduced in Coherence 3.6.   Each of these may have significant drawbacks for certain workloads. Using Coherence as a read-only cache is the simplest option. In this approach, the application is responsible for managing both the database and the cache (either within the business logic or via application server hooks). This approach also tends to provide limited benefit for many workloads, particularly those workloads that either have queries (given the complexity of maintaining a fully cached data set in Coherence) or are not read-heavy (where the cost of managing the cache may outweigh the benefits of reading from it). All updates are made synchronously to the database, leaving it as both a source of latency as well as a potential bottleneck. This approach also prevents addressing "hot data" problems (when certain objects are updated by many concurrent transactions) since most database servers offer no facilities for explicitly controlling concurrent updates. Finally, this option tends to be a better fit for key-based access (rather than filter-based access such as queries) since this makes it easier to aggressively invalidate cache entries without worrying about when they will be reloaded. The advantage of this approach is that it allows strong data consistency as long as optimistic concurrency control is used to ensure that database updates are applied correctly regardless of whether the cache contains stale (or even dirty) data. Another benefit of this approach is that it avoids the limitations of Coherence's write-through caching implementation. TransactionMap is generally used when Coherence acts as system of record. TransactionMap is not generally compatible with write-through caching, so it will usually be either used to manage a standalone cache or when the cache is backed by a database via write-behind caching. TransactionMap has some restrictions that may limit its utility, the most significant being: The lock-based concurrency model is relatively inefficient and may introduce significant latency and contention. As an example, in a typical configuration, a transaction that updates 20 cache entries will require roughly 40ms just for lock management (assuming all locks are granted immediately, and excluding validation and writing which will require a similar amount of time). This may be partially mitigated by denormalizing (e.g. combining a parent object and its set of child objects into a single cache entry), at the cost of increasing false contention (e.g. transactions will conflict even when updating different child objects). If the client (application server JVM) fails during the commit phase, locks will be released immediately, and the transaction may be partially committed. In practice, this is usually not as bad as it may sound since the commit phase is usually very short (all locks having been previously acquired). Note that this vulnerability does not exist when a single NamedCache is used and all updates are confined to a single partition (generally implying the use of partition affinity). The unconventional TransactionMap API is cumbersome but manageable. Only a few methods are transactional, primarily get(), put() and remove(). The ACID transactions framework (accessed via the Connection class) provides atomicity guarantees by implementing the NamedCache interface, maintaining its own cache data and transaction logs inside a set of private partitioned caches. This feature may be used as either a local transactional resource or as logging XA resource. However, a lack of database integration precludes the use of this functionality for most applications. A side effect of this is that this feature has not seen significant adoption, meaning that any use of this is subject to the usual headaches associated with being an early adopter (greater chance of bugs and greater risk of hitting an unoptimized code path). As a result, for the moment, we generally recommend against using this feature. In summary, it is possible to use Coherence in XA-oriented applications, and several customers are doing this successfully, but it is not a core usage model for the product, so care should be taken before committing to this path. For most applications, the most robust solution is normally to use Coherence as a read-only cache of the underlying data resources, even if this prevents taking advantage of certain product features.

  Read the article

• spliiting code in java-don't know what's wrong [closed]

  - by ???? ?????

  I'm writing a code to split a file into many files with a size specified in the code, and then it will join these parts later. The problem is with the joining code, it doesn't work and I can't figure what is wrong! This is my code: import java.io.*; import java.util.*; public class StupidSplit { static final int Chunk_Size = 10; static int size =0; public static void main(String[] args) throws IOException { String file = "b.txt"; int chunks = DivideFile(file); System.out.print((new File(file)).delete()); System.out.print(JoinFile(file, chunks)); } static boolean JoinFile(String fname, int nChunks) { /* * Joins the chunks together. Chunks have been divided using DivideFile * function so the last part of filename will ".partxxxx" Checks if all * parts are together by matching number of chunks found against * "nChunks", then joins the file otherwise throws an error. */ boolean successful = false; File currentDirectory = new File(System.getProperty("user.dir")); // File[] fileList = currentDirectory.listFiles(); /* populate only the files having extension like "partxxxx" */ List<File> lst = new ArrayList<File>(); // Arrays.sort(fileList); for (File file : fileList) { if (file.isFile()) { String fnm = file.getName(); int lastDot = fnm.lastIndexOf('.'); // add to list which match the name given by "fname" and have //"partxxxx" as extension" if (fnm.substring(0, lastDot).equalsIgnoreCase(fname) && (fnm.substring(lastDot + 1)).substring(0, 4).equals("part")) { lst.add(file); } } } /* * sort the list - it will be sorted by extension only because we have * ensured that list only contains those files that have "fname" and * "part" */ File[] files = (File[]) lst.toArray(new File[0]); Arrays.sort(files); System.out.println("size ="+files.length); System.out.println("hello"); /* Ensure that number of chunks match the length of array */ if (files.length == nChunks-1) { File ofile = new File(fname); FileOutputStream fos; FileInputStream fis; byte[] fileBytes; int bytesRead = 0; try { fos = new FileOutputStream(ofile,true); for (File file : files) { fis = new FileInputStream(file); fileBytes = new byte[(int) file.length()]; bytesRead = fis.read(fileBytes, 0, (int) file.length()); assert(bytesRead == fileBytes.length); assert(bytesRead == (int) file.length()); fos.write(fileBytes); fos.flush(); fileBytes = null; fis.close(); fis = null; } fos.close(); fos = null; } catch (FileNotFoundException fnfe) { System.out.println("Could not find file"); successful = false; return successful; } catch (IOException ioe) { System.out.println("Cannot write to disk"); successful = false; return successful; } /* ensure size of file matches the size given by server */ successful = (ofile.length() == StupidSplit.size) ? true : false; } else { successful = false; } return successful; } static int DivideFile(String fname) { File ifile = new File(fname); FileInputStream fis; String newName; FileOutputStream chunk; //int fileSize = (int) ifile.length(); double fileSize = (double) ifile.length(); //int nChunks = 0, read = 0, readLength = Chunk_Size; int nChunks = 0, read = 0, readLength = Chunk_Size; byte[] byteChunk; try { fis = new FileInputStream(ifile); StupidSplit.size = (int)ifile.length(); while (fileSize > 0) { if (fileSize <= Chunk_Size) { readLength = (int) fileSize; } byteChunk = new byte[readLength]; read = fis.read(byteChunk, 0, readLength); fileSize -= read; assert(read==byteChunk.length); nChunks++; //newName = fname + ".part" + Integer.toString(nChunks - 1); newName = String.format("%s.part%09d", fname, nChunks - 1); chunk = new FileOutputStream(new File(newName)); chunk.write(byteChunk); chunk.flush(); chunk.close(); byteChunk = null; chunk = null; } fis.close(); System.out.println(nChunks); // fis = null; } catch (FileNotFoundException fnfe) { System.out.println("Could not find the given file"); System.exit(-1); } catch (IOException ioe) { System.out .println("Error while creating file chunks. Exiting program"); System.exit(-1); }System.out.println(nChunks); return nChunks; } } }

  Read the article

• List of freely available programming books

  - by Karan Bhangui

  I'm trying to amass a list of programming books with opensource licenses, like Creative Commons, GPL, etc. The books can be about a particular programming language or about computers in general. Hoping you guys could help: Languages BASH Advanced Bash-Scripting Guide (An in-depth exploration of the art of shell scripting) C The C book C++ Thinking in C++ C++ Annotations How to Think Like a Computer Scientist C# .NET Book Zero: What the C or C++ Programmer Needs to Know About C# and the .NET Framework Illustrated C# 2008 (Dead Link) Data Structures and Algorithms with Object-Oriented Design Patterns in C# Threading in C# Common Lisp Practical Common Lisp On Lisp Java Thinking in Java How to Think Like a Computer Scientist Java Thin-Client Programming JavaScript Eloquent JavaScript Haskell Real world Haskell Learn You a Haskell for Great Good! Objective-C The Objective-C Programming Language Perl Extreme Perl (license not specified - home page is saying "freely available") The Mason Book (Open Publication License) Practical mod_perl (CreativeCommons Attribution Share-Alike License) Higher-Order Perl Learning Perl the Hard Way PHP Practical PHP Programming Zend Framework: Survive the Deep End PowerShell Mastering PowerShell Prolog Building Expert Systems in Prolog Adventure in Prolog Prolog Programming A First Course Logic, Programming and Prolog (2ed) Introduction to Prolog for Mathematicians Learn Prolog Now! Natural Language Processing Techniques in Prolog Python Dive Into Python Dive Into Python 3 How to Think Like a Computer Scientist A Byte of Python Python for Fun Invent Your Own Computer Games With Python Ruby Why's (Poignant) Guide to Ruby Programming Ruby - The Pragmatic Programmer's Guide Mr. Neighborly's Humble Little Ruby Book SQL Practical PostgreSQL x86 assembly Paul Carter's tutorial Lua Programming In Lua (for v5 but still largely relevant) Algorithms and Data Structures Algorithms Data Structures and Algorithms with Object-Oriented Design Patterns in Java Planning Algorithms Frameworks/Projects The Django Book The Pylons Book Introduction to Design Patterns in C++ with Qt 4 (Open Publication License) Version control The SVN Book Mercurial: The Definitive Guide Pro Git UNIX / Linux The Art of Unix Programming Linux Device Drivers, Third Edition Others Structure and Interpretation of Computer Programs The Little Book of Semaphores Mathematical Logic - an Introduction An Introduction to the Theory of Computation Developers Developers Developers Developers Linkers and loaders Beej's Guide to Network Programming Maven: The Definitive Guide I will expand on this list as I get comments or when I think of more :D Related: Programming texts and reference material for my Kindle What are some good free programming books? Can anyone recommend a free software engineering book? Edit: Oh I didn't notice the community wiki feature. Feel free to edit your suggestions right in!

  Read the article

• Using Active Directory Web Services in .Net application

  - by Iain Carlin

  Hello, I'm trying to build a .Net application to interrogate Active Directory. From my research, Windows 2008 R2 has Active Directory Web Services (ADWS) built in. I can't find any details or examples anywhere on the web which tell me whether I should be able to use ADWS in a .Net application to read/write AD information. Should I simply be able to add a web reference or is ADWS just for Powershell use. Cheers, Iain

  Read the article

• How to read an IIS 6 Website's Directory Structure using WMI?

  - by Steve Johnson

  I need to read a website's folders using WMI and C# in IIS 6.0. I am able to read the Virtual directories and applications using the "IISWebVirtualDirSetting" class. However the physical folders located inside a website cannot be read using this class. And for my case i need to read sub folders located within a website and later on set permission on them. For my requirement i dont need to work on Virtual Directories/Web Service Applications (which can be easily obtained using the code below..). I have tried to use IISWebDirectory class but it has been useful. Here is the code that reads IIS Virtual Directories... public static ArrayList RetrieveVirtualDirList(String ServerName, String WebsiteName) { ConnectionOptions options = SetUpAuthorization(); ManagementScope scope = new ManagementScope(string.Format(@"\\{0}\root\MicrosoftIISV2", ServerName), options); scope.Connect(); String SiteId = GetSiteIDFromSiteName(ServerName, WebsiteName); ObjectQuery OQuery = new ObjectQuery(@"SELECT * FROM IISWebVirtualDirSetting"); //ObjectQuery OQuery = new ObjectQuery(@"SELECT * FROM IIsSetting"); ManagementObjectSearcher WebSiteFinder = new ManagementObjectSearcher(scope, OQuery); ArrayList WebSiteListArray = new ArrayList(); ManagementObjectCollection WebSitesCollection = WebSiteFinder.Get(); String WebSiteName = String.Empty; foreach (ManagementObject WebSite in WebSitesCollection) { WebSiteName = WebSite.Properties["Name"].Value.ToString(); WebsiteName = WebSiteName.Replace("W3SVC/", ""); String extrctedSiteId = WebsiteName.Substring(0, WebsiteName.IndexOf('/')); String temp = WebsiteName.Substring(0, WebsiteName.IndexOf('/') + 1); String VirtualDirName = WebsiteName.Substring(temp.Length); WebsiteName = WebsiteName.Replace(SiteId, ""); if (extrctedSiteId.Equals(SiteId)) //if (true) { WebSiteListArray.Add(VirtualDirName ); //WebSiteListArray.Add(WebSiteName); //+ "|" + WebSite.Properties["Path"].Value.ToString() } } return WebSiteListArray; } P.S: I need to programmatically get the sub folders of an already deployed site(s) using WMI and C# in an ASP. Net Application. I need to find out the sub folders of existing websites in a local or remote IIS 6.0 Web Server. So i require a programmatic solution. Precisely if i am pointed at the right class (like IISWebVirtualDirSetting etc ) that i may use for retrieving the list of physical folders within a website then it will be quite helpful. I am not working in Powershell and i don't really need a solution that involves powershell or vbscripts. Any alternative programmatic way of doing the same in C#/ASP.Net will also be highly appreciated.

  Read the article

• Using a Script to automate data entry to an OpenOffice Calc Spreadsheet

  - by MagicAndi

  I would like to be able to automate creating spreadsheets and adding data to an OpenOffice spreadsheet using a script (any scripting language is acceptable - PowerShell, Python, or even JavaScript). What is a suitable library or tutorial?

  Read the article

• How to escape trailing backslash in NVelocity

  - by Ben

  I am using NVelocity to process various PowerShell scripts before they are executed against a server. My question is how to escape a backslash trailing a variable: e.g. ls \\$computername\c$ $computername should be replaced with a valid computer name at runtime, but the trailing backslash (\c$) means that it does not. Thanks Ben

  Read the article

• Is there a way to get access to a window handle in windows using WSH, or WMI or similar?

  - by Jotham

  Is there a way to get access to a window handle in windows using WSH, or WMI or similar? I just want to flag a window as always-on-top. Ideally I'd use windows script host for this. Please note, I don't want to install PowerShell on the system in question. We are nervous about any additional software and already have some VBS files involved. Regards,

  Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >