Search Results

Search found 18029 results on 722 pages for 'stripe size'.

Page 226/722 | < Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >

• Free space in tmpfs partition not adding up

  - by Dean Herbert

  I have had my /tmp/ partition filling up recently when it should not be anywhere near full. On further investigation, I found that the partition was listing free space a lot lower than it should be. I am guessing a remount will fix this, but am very curious as to why this has happened and where this space has gone. du output: root@odoroki:/tmp# du --summarize -h 3.3M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.3G 653M 84% /tmp Update: after deleting some files it has happened again. du output: root@odoroki:/tmp# du -h --summarize 11M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.9G 0 100% /tmp I have a feeling this has started since a recent apt-get upgrade, but it still seems like strange behaviour. I did do a quick scan over lsof output and couldn't see any open/stuck file handles. Unfortunately due to the seriousness of the issue I had to reboot the server, after which usage seems to match correctly.

  Read the article

• Is it possible to add tcp autotuning to windows xp?

  - by Caspin

  I have a network application that needs to send messages at 60 times a second. The messages are usually 300-400 bytes, but can be as large as 1500. The default setting for SO_SNDBUF is too small and limits the number of message that can be sent if the network latency is anything greater then 100ms. The naive solution is to just bump the SO_SNDBUF size to to something large. However, depending on the latency and the packet size that could be anywhere from 64K to 8MB. One of Vista's new features is TCP autotuning. Autotuning monitors the tcp connection and dynamically adjust the buffer sizes to allow for optimal communication. I would like to use auto tuning on our windows xp machine so I don't need to guess what my buffers sizes should be. Is there a way to install either a microsoft or 3rd party tcp autotuner on windows xp?

  Read the article

• Is it possible to add tcp autotuning to windows xp?

  - by Caspin

  I have a network application that needs to send messages at 60 times a second. The messages are usually 300-400 bytes, but can be as large as 1500. The default setting for SO_SNDBUF is too small and limits the number of message that can be sent if the network latency is anything greater then 100ms. The naive solution is to just bump the SO_SNDBUF size to to something large. However, depending on the latency and the packet size that could be anywhere from 64K to 8MB. One of Vista's new features is TCP autotuning. Autotuning monitors the tcp connection and dynamically adjust the buffer sizes to allow for optimal communication. I would like to use auto tuning on our windows xp machine so I don't need to guess what my buffers sizes should be. Is there a way to install either a microsoft or 3rd party tcp autotuner on windows xp?

  Read the article

• Non-embedded font with different name across operating systems when printing HTML to PDF

  - by sennett

  I create a document using HTML markup. I want to use Palatino, which is called Palatino on Windows and Palatino Linotype on Mac, so I specify my CSS accordingly: font-family: Palatino Linotype, Palatino, serif;. I then print to a PDF using PrimoPDF under Windows. It all looks good when viewed in Windows. But I want this PDF to look the same on a Mac, and the resulting file size (94KB) would suggest that the font (size 460KB) is not getting embedded by Primo, perhaps because it is a native font. How will this look? Will the PDF file format resolve this, or will the format of my PDF be wang when viewed under OSX? Please note that I do not want to embed the font. I used a web-safe font to avoid this need, and it just so happens that the one I picked does not have the same name in OSX as in Windows.

  Read the article

• Can't run minecraft on ubuntu 12.04 lts [duplicate]

  - by user170011

  This question already has an answer here: How to correctly install and troubleshoot Minecraft (Client) 3 answers I was trying to run minecraft on my laptop with ubuntu 12.04 lts 64 bit. I have a lenovo ideapad p580 with 7.7 Gb and an Intel® Core™ i7-3520M CPU @ 2.90GHz × 4 processor. Under the graphics section of the system overview in ubuntu it says I have none installed. My computer comes with and nvidia geforce graphics card but it isnt recognized. When I start minecraft I get this crash report. ---- Minecraft Crash Report ---- // Shall we play a game? Time: 24/06/13 7:23 PM Description: Failed to start game org.lwjgl.LWJGLException: Could not init GLX at org.lwjgl.opengl.LinuxDisplayPeerInfo.initDefaultPeerInfo(Native Method) at org.lwjgl.opengl.LinuxDisplayPeerInfo.<init>(LinuxDisplayPeerInfo.java:52) at org.lwjgl.opengl.LinuxDisplay.createPeerInfo(LinuxDisplay.java:684) at org.lwjgl.opengl.Display.create(Display.java:854) at org.lwjgl.opengl.Display.create(Display.java:784) at org.lwjgl.opengl.Display.create(Display.java:765) at net.minecraft.client.Minecraft.a(SourceFile:235) at avv.a(SourceFile:56) at net.minecraft.client.Minecraft.run(SourceFile:507) at java.lang.Thread.run(Thread.java:679) A detailed walkthrough of the error, its code path and all known details is as follows: -- System Details -- Details: Minecraft Version: 1.5.2 Operating System: Linux (amd64) version 3.5.0-34-generic Java Version: 1.6.0_27, Sun Microsystems Inc. Java VM Version: OpenJDK 64-Bit Server VM (mixed mode), Sun Microsystems Inc. Memory: 406175448 bytes (387 MB) / 514523136 bytes (490 MB) up to 1908932608 bytes (1820 MB) JVM Flags: 2 total; -Xmx2048M -Xms512M AABB Pool Size: 0 (0 bytes; 0 MB) allocated, 0 (0 bytes; 0 MB) used Suspicious classes: No suspicious classes found. IntCache: cache: 0, tcache: 0, allocated: 0, tallocated: 0 LWJGL: 2.4.2 OpenGL: ~~ERROR~~ NullPointerException: null Is Modded: Probably not. Jar signature remains and client brand is untouched. Type: Client (map_client.txt) Texture Pack: Default Profiler Position: N/A (disabled) Vec3 Pool Size: ~~ERROR~~ NullPointerException: null I can run it on different versions of linux such as fedora.

  Read the article

• Extension GLX missing...on a desktop PC

  - by Bart van Heukelom

  I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

  Read the article

• POSTFIX bouncing when destination is my domain

  - by ZeC

  I am using provider mail hosting to send emails. On my Webserver I also have Postfix running and configured. Here is my main.cf smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = yes readme_directory = no smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache myhostname = 2-5-8.bih.net.ba alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = bhcom.info, 2-5-8.bih.net.ba, localhost.bih.net.ba, localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = mailbox_size_limit = 10485760 recipient_delimiter = + inet_interfaces = 80.65.85.114 When I try sending email to my hosted domain name, every message gets bounced with this error: Nov 4 20:38:34 2-5-8 postfix/pickup[802]: 1492A3E0C6C: uid=0 from=<[email protected]> Nov 4 20:38:34 2-5-8 postfix/cleanup[988]: 1492A3E0C6C: message-id=<[email protected]> Nov 4 20:38:34 2-5-8 postfix/qmgr[803]: 1492A3E0C6C: from=<[email protected]>, size=348, nrcpt=1 (queue active) Nov 4 20:38:34 2-5-8 postfix/local[990]: 1492A3E0C6C: to=<[email protected]>, relay=local, delay=0.12, delays=0.08/0.01/0/0.04, dsn=5.1.1, status=bounced (unknown user: "info") Nov 4 20:38:34 2-5-8 postfix/cleanup[988]: 28ED53E0C6D: message-id=<[email protected]> Nov 4 20:38:34 2-5-8 postfix/qmgr[803]: 28ED53E0C6D: from=<>, size=2056, nrcpt=1 (queue active) Nov 4 20:38:34 2-5-8 postfix/bounce[991]: 1492A3E0C6C: sender non-delivery notification: 28ED53E0C6D Nov 4 20:38:34 2-5-8 postfix/qmgr[803]: 1492A3E0C6C: removed Nov 4 20:38:34 2-5-8 postfix/local[990]: 28ED53E0C6D: to=<[email protected]>, relay=local, delay=0.06, delays=0.03/0/0/0.02, dsn=5.1.1, status=bounced (unknown user: "razvoj") Nov 4 20:38:34 2-5-8 postfix/qmgr[803]: 28ED53E0C6D: removed However, when I try to @gmail.com, it sends message without problems, and here is log. What might be the issue? Nov 4 20:41:23 2-5-8 postfix/pickup[802]: B2EC63E0C6C: uid=0 from=<[email protected]> Nov 4 20:41:23 2-5-8 postfix/cleanup[1022]: B2EC63E0C6C: message-id=<[email protected]> Nov 4 20:41:23 2-5-8 postfix/qmgr[803]: B2EC63E0C6C: from=<[email protected]>, size=350, nrcpt=1 (queue active) Nov 4 20:41:23 2-5-8 postfix/smtp[1024]: connect to gmail-smtp-in.l.google.com[2a00:1450:4001:c02::1a]:25: Network is unreachable Nov 4 20:41:24 2-5-8 postfix/smtp[1024]: B2EC63E0C6C: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[173.194.70.26]:25, delay=0.97, delays=0.08/0.01/0.27/0.62, dsn=2.0.0, status=sent (250 2.0.0 OK 1352058066 f7si2180442eeo.46) Nov 4 20:41:24 2-5-8 postfix/qmgr[803]: B2EC63E0C6C: removed

  Read the article

• Are there any real-world cases for C++ without exceptions?

  - by Martin

  In When to use C over C++, and C++ over C? there is a statement wrt. to code size / C++ exceptions: Jerry answers (among other points): (...) it tends to be more difficult to produce truly tiny executables with C++. For really small systems, you're rarely writing a lot of code anyway, and the extra (...) to which I asked why that would be, to which Jerry responded: the main thing is that C++ includes exception handling, which (at least usually) adds some minimum to the executable size. Most compilers will let you disable exception handling, but when you do the result isn't quite C++ anymore. (...) which I do not really doubt on a technical real world level. Therefore I'm interested (purely out of curiosity) to hear from real world examples where a project chose C++ as a language and then chose to disable exceptions. (Not just merely "not use" exceptions in user code, but disable them in the compiler, so that you can't throw or catch exceptions.) Why does a project chose to do so (still using C++ and not C, but no exceptions) - what are/were the (technical) reasons? Addendum: For those wishing to elaborate on their answers, it would be nice to detail how the implications of no-exceptions are handled: STL collections (vector, ...) do not work properly (allocation failure cannot be reported) new can't throw Constructors cannot fail

  Read the article

• Sound not working after installing PCI video card and then removing it

  - by bakhshu

  I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• Deleting pagefile.sys on shutdown

  - by Daniel E. Shub

  I have a Windows XP machine (it is a VM running in Xen) that I would like to backup. I have enabled ClearPageFileAtShutdown by following MS KB 314834. If I cleanly shutdown the XP machine and then mount the drive in another machine (which is trivial since the machine is virtual) I still have a large pagefile.sys. I was hoping that enabling ClearPageFileAtShutdown would result in a pagefile.sys with a size near zero. I have two questions. First, is it possible to have pagefile.sys be deleted, or have a drastic size reduction, at shutdown? Second, can I exclude pagefile.sys from my backup?

  Read the article

• Emails not being delivered

  - by Tomtiger11

  Comment pointed out that this may fix my problem, and it did: Why don't mails show up in the recipient's mailspool? I use Postfix with Dovecot, and when I send an email from my gmail to my server, it is received at the server, but not at my email client using POP3. I can verify it being received at the server using the mail command. This is my main.cf: queue_directory = /var/spool/postfix command_directory = /usr/sbin daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix mail_owner = postfix myhostname = tom4u.eu myorigin = $myhostname inet_interfaces = all inet_protocols = all unknown_local_recipient_reject_code = 550 relay_domains = $mydomain alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 sendmail_path = /usr/sbin/sendmail.postfix newaliases_path = /usr/bin/newaliases.postfix mailq_path = /usr/bin/mailq.postfix setgid_group = postdrop html_directory = no manpage_directory = /usr/share/man sample_directory = /usr/share/doc/postfix-2.6.6/samples readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES smtpd_tls_cert_file = /etc/postfix/certs/cert.pem milter_protocol = 2 milter_default_action = accept smtpd_milters = inet:localhost:8891 non_smtpd_milters = inet:localhost:8891 smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_local_domain = $myhostname smtpd_recipient_restrictions = reject_non_fqdn_recipient,permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth If you could help me with this, I'd be most grateful, if you need any more information, please ask. var/log/maillog: May 30 22:44:25 tom4u postfix/smtpd[18626]: connect from mail-we0-f181.google.com[74.125.82.181] May 30 22:44:25 tom4u postfix/smtpd[18626]: 318F679B7F: client=mail-we0-f181.google.com[74.125.82.181] May 30 22:44:25 tom4u postfix/cleanup[18631]: 318F679B7F: message-id=<CAA_0zdxY-WUFGOC57K_yVn0G+5hN=8KSXuohJqMDB5Rm7bqu8w@mail.gmail.com> May 30 22:44:25 tom4u opendkim[15006]: 318F679B7F: mail-we0-f181.google.com [74.125.82.181] not internal May 30 22:44:25 tom4u opendkim[15006]: 318F679B7F: not authenticated May 30 22:44:25 tom4u opendkim[15006]: 318F679B7F: DKIM verification successful May 30 22:44:25 tom4u opendkim[15006]: 318F679B7F: s=20120113 d=gmail.com SSL May 30 22:44:25 tom4u postfix/qmgr[16282]: 318F679B7F: from=<[email protected]>, size=1720, nrcpt=1 (queue active) May 30 22:44:25 tom4u postfix/smtpd[18626]: disconnect from mail-we0-f181.google.com[74.125.82.181] May 30 22:44:25 tom4u postfix/local[18632]: 318F679B7F: to=<[email protected]>, relay=local, delay=0.17, delays=0.12/0.01/0/0.03, dsn=2.0.0, status=sent (delivered to mailbox) May 30 22:44:25 tom4u postfix/qmgr[16282]: 318F679B7F: removed May 30 22:45:32 tom4u dovecot: pop3-login: Login: user=<tom>, method=PLAIN, rip=SNIP, lip=176.31.127.165, mpid=18679 May 30 22:45:32 tom4u dovecot: pop3(tom): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 May 30 22:46:32 tom4u dovecot: pop3-login: Login: user=<tom>, method=PLAIN, rip=SNIP, lip=176.31.127.165, mpid=18725 May 30 22:46:32 tom4u dovecot: pop3(tom): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0

  Read the article

• Various problems with software raid1 array built with Samsung 840 Pro SSDs

  - by Andy B

  I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

  Read the article

• Why change net.inet.tcp.tcbhashsize in FreeBSD?

  - by sh-beta

  In virtually every FreeBSD network tuning document I can find: # /boot/loader.conf net.inet.tcp.tcbhashsize=4096 This is usually paired with some unhelpful statement like "TCP control-block hash table tuning" or "Set this to a reasonable value." man 4 tcp isn't much help either: tcbhashsize Size of the TCP control-block hash table (read-only). This may be tuned using the kernel option TCBHASHSIZE or by setting net.inet.tcp.tcbhashsize in the loader(8). The only document I can find that touches on this mysterious thing is the Protocol Control Block Lookup subsection beneath Transport Layer in Optimizing the FreeBSD IP and TCP Stack, but its description is more about potential bottlenecks in using it. It seems tied to matching new TCP segments to their listening sockets, but I'm not sure how. What exactly is the TCP Control Block used for? Why would you want to set its hash size to 4096 or any other particular number?

  Read the article

• Creating a bootable flash without overlayfs

  - by Septagram

  I want to create an USB stick to carry my Ubuntu everywhere around with me. It's not intended to spread Ubuntu by installing it everywhere, but rather for running my configured system on any computer I come across. So far, I went with installing Ubuntu with unetbootin, however, I have some issues with this. When installed with netbootin, the original disk image is kept intact on the flash drive, forever. Also, a file is created for persistent storage and during boot it is accessed together with the image by overlayfs. This, in my opinion, has the following problems: If system is updated regularly, then files from the image are overwritten in persistent storage, doubling their size and wasting precious space. Persistent storage has a fixed size that you have to define from the start, again, wasting precious space. I'm not 100% sure, but maybe using overlayfs makes disk access slower, and more so on the relatively slow devices. So I'd like to find another solution: either to get rid of the original image or to install Ubuntu "normally" on the separate ext2 partition, or maybe even install it in the main vfat partition on the USB stick. Suggestions?

  Read the article

• Installing Ubuntu Server 12.04 as a software RAID 1 mirror fails to boot

  - by Jeff Atwood

  I'm installing a few new Ubuntu Server 12.04 LTS servers, and they have two 512 GB SSDs. I want them to use software RAID 1 mirroring, so I was following this document religiously step by step: https://help.ubuntu.com/12.04/serverguide/advanced-installation.html To summarize the above official documentation: to set up a software RAID 1 mirror in Ubuntu Server, you choose manual partitioning during the setup, and do this on each drive: "swap" partition of roughly RAM size "physical volume for RAID" partition for remaining drive size After that, you set up the RAID 1 mirror using the RAID partitions on drive A and B, make it ext4 and containing the root filesystem partition. Setup continues from there just fine. One caveat: I was completely unable to select the "physical volume for RAID" as bootable. When I tried to do that in setup, it had no effect: I could press enter on the "make bootable" option all day long and nothing would ever change. However, after install successfully completes, I have a big problem: the system won't boot! I get Reboot and Select proper boot device or Insert Boot Media in selected Boot device and press a key What did I do wrong? Why can't I mark that "physical volume for RAID" partition bootable during Ubuntu Server setup? Is there some way for me to make the physical volumes for RAID bootable after the fact, perhaps from a live CD or something?

  Read the article

• BI Publisher : Formatting Issues

  - by Manoj Madhusoodanan

  While creating BI Publisher reports the formatting issues are quite common.Here I am discussing some common issues related to BIP report development. 1) First issue is related to column formatting.When you want to display some data which has leading zeros or trailing zeros after '.' in EXCEL output you will not get the desired output.But in PDF it will come as what you are expecting.This is not with the issue of your data. This is due to the unique nature of EXCEL cell format.When you are trying to put a text data in a cell with out making any change to cell format it will treat as number and it will truncate all leading zeros and all trailing zeros after '.' . So what you have to do is to convert that data into a format which EXCEL can treat as text. Eg: If you want to display 0020100 convert this data into ="0020100". Same way for 23789.02300 to ="23789.02300".   Note: This is applicable to EXCEL output only.If you have multiple output type apply it only for EXCEL. 2) Second is related to report size issue in PDF output type.If the number of columns are more and if you want to show most of the columns in one row andif it is a PDF output you can choose the paper size as Legal (8.5 x 14''). You will get more spaces in the template to accommodate more columns. 3) If your XML data contains special characters like &,<,> etc ..  pass the data to DBMS_XMLGEN.CONVERT function.It will replace special characters with corresponding XML notations. Eg: (a>b) & (c!=d) to  (a&gt;b) &amp; (c!=d)

  Read the article

• A Quarter Century of SPARC

  - by kemer

  You might have missed an interesting milestone: the 25th anniversary of SPARC. Twenty-five years! Almost 40% of my life: humbling, maybe a little scary. When I joined Sun Microsystems in 1988, SPARC was just starting to shake things up. The next year we introduced the SPARCstation 1, which had basically triple the performance of our Motrolla-based Sun–3 systems. Not too long after that, our competition began a campaign of “SPARC is dead.” We really distressed them with our success, in spite of our small size. “It won’t last.” “It can’t last!” So they told themselves. For a stroll down memory lane take a look at this page. I remember the sales meeting we had in Atlanta to internally announce the SPARCstation 1. Sun hadn’t really hit the big times, yet. Our much bigger competitors viewed us as an ill-mannered pest, certain of our demise. And, why wouldn’t they be certain: other startups more our size, such as Apollo (remember them?), Silicon Graphics (they fought the good fight!), and the incredibly cool Symbolics are memories. Wait! There was also a BIG company, DEC, who scoffed at us: they are history, too. In fact, we really upset them with what was supposed to be an internal-only video production that was a take-off on Bruce Lee movies, in which we battled the evil Doctor DEC – complete with computer mice (or is that “mouses”?) wielded like nun chucks with the new SPARCstation 1 somehow in the middle of everything. The memory is vivid, but the details hazy. After all, that was almost a quarter century ago. So, here’s to Oracle’s SPARC: still going strong after all these years. – Kemer

  Read the article

• How Can I Close the Leftmost Window in Vim?

  - by msutherl

  I'm trying to write a command that will close a tree-browser (vim-tree) window and resize the other windows. ,to opens the window and adjusts the window size so that all open windows retain a normal size (using :set columns+=30CTRL-W =). ,tc should close the tree window (full-length, far left) and resize the main window (:set columns-=30). How can I write a command that closes the leftmost window so that I can type ,tc to close the window and resize in one shot? I can navigate to it with CTRL-W h, but it is inelegant and potentially annoying (audible bell!) to use 10CTRL-W h in the command. :topleft c unfortunately doesn't work. Can you think of an elegant way to do this?

  Read the article

• Worthless Anti-Spam (What can we learn)

  - by smehaffie

  I recently can across a site that had a “anti-spam” field at the bottom of the entry from.  The first issue I had with it was that at 1280X800 you could not read the value you were suppose to enter (see below).  You tell me, should you enter div, dlv, piv, or plv. But even worse than not being readable at high resolutions is the fact that the programmer who coded it really did not understand what this was used for.  An anti-spam (aka: catpcha) entry field should not be able to be read by looking at the HTML DOM object (so entry of value cannot be scripted).  In this case the value is simply a disabled text input filed that has the value you need to type.  So a hacker would simply need to search for text input field named “spam2” and then they could flood the site with spam. 1: <td> 2: <label> 3: <input name="spam1" type="text" class="small" id="spam1" size="6" maxlength="3" /> 4: <input name="spam2" type="text" class="small" id="spam2" value="plv" 5: disabled="disabled" size="6" maxlength="3" /> 6: * <span class="small">- Anti-SPAM key - please enter matching value</span> 7: </label> 8: </td>   There are some things to learn from this example: 1) Always make sure you understand why you are coding a feature/function for any program you write.  Just following the requirements without realizing the “why” will sooner or later come back to bite you.  I think the above example appears to be an example of this. 2) Always check how the screen appears in different resolutions.  In this case it was pretty much unreadable in 1280x800, but you could read it in 800X600 (but most people I know do not have their resolution set that low).  Lucky for me I could “View Source” and get the value I needed to enter.

  Read the article

• Compressing/compacting messages over websocket on Node.js

  - by icelava

  We have a websocket implementation (Node.js/Sock.js) that exchanges data as JSON strings. As our use cases grow, so have the size of the data transmitted across the wire. The websocket protocol does not natively offer any compression feature, so in order to reduce the size of our messages we'd have to manually do something about the serialisation. There appear to be a variety of LZW implementations in Javascript, some which confuses me on their compatibility for in-browser use only versus transmission across the wire due to my lack of understanding on low-level encodings. More importantly, all of them seem to take a noticeable performance drag when Javascript is the engine doing the compression/decompression work, which is not desirable for mobile devices. Looking instead other forms of compact serialisation, MessagePack does not appear to have any active support in Javascript itself; BSON does not have any Javascript implementation; and an alternative BISON project that I tested does not deserialise everything back to their original values (large numbers), and it does not look like any further development will happen either. What are some other options others have explored for Node.js?

  Read the article

• HELP! Free space not reclaimed after online resizing ext4 in Ubuntu 9.10

  - by TiansHUo

  My root partition was filling up, with only 500 mbs left, I wanted to resize my root partition from 20 Gb to 40Gb So I resized my partition by using these steps: Using Gparted to resize another partition to give space for the EXT4 Using fdisk, deleting the root partition (on /dev/sda2), and creating it again using the new size resize2fs /dev/sda2 Updating grub2 But now the problem is that although I can boot in my new partition and the new partition shows it is 40Gb, but the free size was still 500mb. So I booted from a LiveCD and checked with e2fsck -p /dev/sda2, it reported clean. So I added the -f flag (force check), still, the drive is full.

  Read the article

• Creating a file server - How can I use a large VHD file in Hyper-V? (700GB)

  - by barfoon

  Hey everyone, After a few discussions (here, here, and here), I am still unable to create a simple VM that will be used as a fileserver hosted on my Hyper-V box. I have created a fixed 700GB SCSI drive (.vhd file), as I have learned an IDE drive of this size is not possible. Not to sound too cynical, but its blown me away at how much trouble its been to create a large amount of space and start using it. What is the best way to create a fileserver with a drive of this size hosted on Hyper-V Server 2008, and how can I get it going??? Inclusion of OS, driver, integration tools etc, anything you feel is required would be greatly appreciated. Extra information I am using the stand-alone version of Hyper-V server, and not Windows Server 2008. I have tried loading the Linux Integration Tools (linked in the comments of the last link above) onto a SUSE 11 VM and the installation fails, the machine cannot see the vhd at all. Thanks very much,

  Read the article

• Desktop Fun: Mountains Theme Wallpapers

  - by Asian Angel

  Do you love to go on hikes in the mountains and enjoy the scenery? Bring those sweeping views and a touch of the great outdoors to your desktop with our Mountains Theme Wallpaper collection. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution.         For more fun wallpapers be certain to visit our new Desktop Fun section. Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Forest Theme WallpapersDesktop Fun: Fantasy Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

< Previous Page | 222 223 224 225 226 227 228 229 230 231 232 233  | Next Page >