Search Results

Search found 11524 results on 461 pages for 'insurance networking news'.

Page 228/461 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• Can't ping IPs for devices not part of Windows Domain

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

  Read the article

• Laptop dual ethernet?

  - by mgb

  Anyone know of a laptop with dual gigabit ethernet ports?

  Read the article

• Debian Wheezy, hostapd running but no AP detected by clients

  - by f0o

  I've an TL-WN951N (AR5416+AR5008) using ath9k module running an hostapd and a dhcp for it. So hostapd starts fine: $ hostapd wifi.test Configuration file: wifi.test Using interface int1 with hwaddr f4:ec:38:9b:d4:93 and ssid 'test' hostapd.conf: interface=int1 driver=nl80211 ssid=test channel=1 But nobody seems to find it or being able to see it or connect to it by setting BSSID to 'test'. I'm quite frustrated now, I find 'howto' after 'howto' from people with same chipsets and it always seemed to work out great for them - but not here... iw list even shows up the AP mode being present at the interface... Thanks for your help

  Read the article

• Hyper-V with multiple physical networks

  - by Yaman

  I have Hyper-V on my laptop with a wireless and Ethernet card, sometimes I connect using wireless card, and sometimes using the Ethernet cable. I am trying to configure Hyper-v to work always with internet provided to virtual machine. I have tried to create 2 virtual switches, one external to the Wireless network card, and the other one external to the Ethernet card. What happens is that the wireless network creates a bridge object in the network and sharing center\Network connections of windows 8, while the Ethernet does not. Unfortunately, they do not work together as external, i have to set the connected one to external and the other one as external, I also have to go to the properties of the bridge and virtual Ethernet properties to uncheck and check some components like: Client for Microsoft Networks Deterministic Network Enhancer VMWare Bridge Protocol QoS Packet Scheduler File and Printer Sharing for Microsoft Networks In order to make things work. Sometimes I keep the wireless network switch external, and go to another location (another wireless network), and it disconnects, i have to reconfigure the switches. Is there a way to do the configuration once and remain working wherever I connect, whether its Wireless or Ethernet and on any network with DHCP?

  Read the article

• Inbound connections using Internet Connection Sharing in Apple/Mac/Leopard

  - by tlianza

  I have a Mac mini which I'm using to give some other devices wireless access, by sharing it's Airport connection with the local ethernet, and that is plugged into a switch. All devices can get online no problem. (See how: http://www.macosxhints.com/article.php?story=20041112101646643 and http://www.macosxhints.com/article.php?story=20071223001432304 ) The issue is that I need to be able to connect in to these machines as well (at least, for the Slingbox to work). All the devices have 192.168.2.* addresses, and the rest of my local network is on 192.168.1.*. I tried setting a static route so that the 192.168.2.* addresses would use a gateway of 192.168.1.50 (my mac mini's address) but that didn't seem to help. Does anyone know if what I'm trying to do is possible? I admit I'm not certain what Internet Connection sharing is really doing under the hood... perhaps it just does basic nat, and doesn't do the type of routing I'm looking for. If so, anyone know if this is possible?

  Read the article

• How to make Windows 7 Network show Samba share after VM is rebooted/restored?

  - by lackey

  On Windows 7, I have VirtualBox running Linux (Ubuntu 8.04), with Samba set up so that the Windows host can access it. But if the virtual machine is shut down & restored, or rebooted, the Windows Network no longer shows it. I've tried refreshing many times, restarting Samba, disabling/enabling the virtual network adapter, and running the succession of commands ipconfig /release, ipconfig /flushdns, & ipconfig /renew, but none worked. As a last resort I could restart the host itself, but is there a better way?

  Read the article

• Laptop dual ethernet?

  - by mgb

  Anyone know of a laptop with dual gigabit ethernet ports?

  Read the article

• How to make my computer accessible anywhere

  - by Devoted

  Hi, How can I make my computer accessible anywhere (via SSH preferably). I have Ubuntu installed on it. Or Is there a way to set up dyndns.com using dynamic IP without any router changes?

  Read the article

• how to install Wimax Dongle over Ubuntu?

  - by Mosh

  i have Asus Wimax Dongle and it has an Independence software from the Asus company requires user name and password and its running will over windows 7 now i've tried ubuntu 10.10 but nothing happens when i plug the dongle into usb. in windows if you plugs it for the first time, an application wizard begins and you can find a virtual cd in my computer but i cant find it in Ubuntu now i would install it over ubuntu, how? toast for all

  Read the article

• Netgear VPN can't access specific server

  - by Critologist

  I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

  Read the article

• How to get all IPs of a domain?

  - by DenMark

  How can I get all IPs of a domain name, say, www.google.com? Of course, nslookup and host command will give me IPs of a domain. But what shall I do if I want a list ALL (or, at least a lot more than just one or two..) IPs of that domain?

  Read the article

• Likeliness of obtaining same IP address after restarting a router

  - by ?affael

  My actual objective is to simulate logged IPs of web-site users who are all assumed to use dynamically assigned IPs. There will be two kinds of users: good users who only change IP when the ISP assignes a new one bad users who will restart their router to obtain a new IP So what I would like to understand is what assignment mechanics are usually at work here deciding from what pool of IPs one is chosen and whether the probability is uniformly distributed. I know there is no definite and global answer as this process can be adjusted be the ISP but maybe there is something like a technological frame and common process that allows some plausible assumptions. UPDATE: A bad user will restart the router as often as possible if necessary. So here the central question is how many IP changes on average are necessary to end up with a previously used IP.

  Read the article

• How to troubleshoot problems sharing internet connection via WiFi on Mac OS X

  - by sprugman

  I'm at a hotel, plugged into their network via ethernet on my MacBook. I want to share the connection via wifi to two other computers. I went to Prefs Sharing and set up internet sharing. I know it's working because my friend with a Mac access the net fine. My friend with the PC can see the network, but can't connect to it. In the sharing prefs, airport options, I chose these options: Channel: Automatic Enable encryption: yes WEP Key length 40-bit password length: 5 chars (as specified in the instructional text) Update: I tried it with encryption turned off, and it works. Of course, I'd rather not do that... Any ideas?

  Read the article

• How do I get a 300Mbps connection over 802.11n?

  - by Daniel Schaffer

  I just bought a new wireless setup, consisting of a Cisco E2000 router, Edimax 7718un USB adapter for my laptop and an Edimax 7728in PCI adapter for my HTPC (which isn't in a location I can run cat5 to). I have to stay in the 2.4GHz band because I have an iPhone and a Wii that will need to connect. I'm aware that 11g devices will drop speeds for 11n devices, but they aren't connected yet. The fastest connection I've been able to get, with the router within 5 feet of either the laptop or HTPC is 144Mbps. The router has settings for "20MHz" and "Auto (20 MHz or 40Mhz) channel width, which I've set to the "Auto" setting. I haven't been able to find anything similar for either of the Edimax adapters. This is the first I've dealt with 11n, so I'm not even sure what else could be causing a problem. How do I get up to 300Mbps, or at least a fair bit closer?

  Read the article

• Wi-fi signal with keeping the internet cable

  - by daGrevis

  So the situation is that I have Ethernet cable which provides internet to my computer. Thing I want is to have wi-fi connection in my house and Ethernet cable (like I have before) to use for my PC. I will use wi-fi for my laptop and mobile phone. I think I need router for that and I'm looking at Asus RT-N16 (suggested in Coding Horror) for it, but I am not sure. Is it the right thing for me and I will be able to get wi-fi signal and keep the Ethernet cable? I guess the system will be that current cable goes into router, router provides wi-fi signal and gives back new cable... or something like that. Thanks in any advice! And sorry if topic isn't in right site.

  Read the article

• Port knocking via SSH tunnels

  - by j0ker

  I have a server running in my university's internal network. There is only one SSH daemon running which is secured by port knocking with knockd. Works fine if I try to connect from within the internal network. But since the server has no external IP, I have to tunnel into the internal network every time I want to access the server from outside. And since tunneling only works for a single port I cannot do the port knocking as easily as from an internal client. In fact, I don't get it to work at all. What I'm trying is opening tunnels for all the different ports that have to be knocked. Then I send TCP-SYN packets into the tunnels. But that doesn't work even for a single port. If I establish the tunnel on the first port in the knock sequence and send a packet through it, it doesn't reach the server. There is no entry in the log file of knockd, while there should be something like 123.45.67.89: openSSH: Stage 1 (as shown with internal knocks). So I guess, the problem doesn't exist within my knocking script but is a more general one. Are there any known problems with what I'm trying to do? Is it even possible or am I missing something? Thanks in advance!

  Read the article

• Gmail outage only on one computer

  - by user123079

  Problem: Gmail (and only Gmail) quits working for a period of 5-10 mins only on one computer. Problem occurs several times daily Does not appear to be any "triggering event" - user is simply using Gmail normally when the problem arises User can access their Gmail from other computers on same LAN User can access all other sites, including other Google sites, from affected computer After several mins of outage, Gmail will spontaneously resume normal operation on affected computer The problem occurs in all browsers (Chrome, FF, Safari) Computer: MacBook Pro, OSX 10.7.3, latest browsers I find this very baffling. Any advice welcome.

  Read the article

• Extending a home wireless network using two routers running tomato

  - by jalperin

  I have two Asus RT-N16 routers each flashed with Tomato (actually Tomato USB). UPSTAIRS: Router 'A' (located upstairs) is connected to the internet via the WAN port and connected via a LAN port to a 10/100/1000 switch (Switch A). Several desktops are also attached to Switch A. Router A uses IP 192.168.1.1. DOWNSTAIRS: I've just acquired Router 'B' and set it to IP 192.168.1.2. I have a cable running from Switch A downstairs to another switch (Switch B). Tivo, a blu-ray player and a Mac are connected to Switch B. My plan was to connect Router B to Switch B so that I have improved wireless access downstairs. (The wireless signal from Router A gets weak downstairs in a number of locations.) How should I configure Router B so that all devices in the house can see and talk to one another? I know that I need to change DHCP on Router B so that it doesn't cover the same range as DHCP on Router A. Should I be using WDS on the two routers, or is that unnecessary since I already have a wired connection between the two routers? Any other thoughts or suggestions? Thanks! --Jeff

  Read the article

• Multiple virtual VLAN interfaces on single NIC (Debian)

  - by RayQuang

  I'm trying to setup multiple virtual interfaces with VLAN's on a single NIC. I'm running Debian Squeeze. Currently this is my /etc/netowrk/interfaces auto eth0.10 iface eth0.10 inet dhcp This gives me a working connection, however I'm not sure how to configure several like these on a single NIC so I can use multiple external IP's. I have tried aliasing the VLAN's like so: iface eth0.10:1 But that was not successful and it said failed to bring up interface. And suggestions would be greatly appreciated :)

  Read the article

• Testing the load factor in my lab

  - by Ami Winter

  I am a system admin in a lab, I have ~90 computers in the lab and I want to check the load factor on them.. meaning, to check how many people are working on the computers hourly.. To see if I need to buy more computers or not. I am looking for a way to build a script to check if a computer is logged on or not.. (0 for log off - 1 for log on) After I will have this data, I know how to build a script to build me the graphs. All the computers are linked via a domain and most of them have windows XP (few windows 7) I'll be happy to get some help. Amihay

  Read the article

• Using wifi router as bridge to increase signal?

  - by overtherainbow

  A friend of mine lives in an appartment building whose structure is such that wifi signal is very weak. Even a USB key won't work. I was thinking of buying an entry-level wifi router and reconfigure it as a bridge to act as repeater. Would that increase the chance of getting a good signal, or I shouldn't bother? If experience shows that it does improve things significantly, is their another router I should look at besides the Linux-based Linksys models? Thank you.

  Read the article

• Could a HomePlug be used to connect 2 routers?

  - by tigermain

  I have 2 routers that I would like to connect together (they are wireless but dont have an AP mode) could I simply buy a pair of homeplugs and connect them in order for all machines to have complete visibility of each other?! The DHCP will only be enabled on one, so the other will simply be acting as a switch

  Read the article

• Variable TTL inside a LAN

  - by user140783

  I recently discovered that ping my local router, returns different TTL values??. The ping 3 switch must pass through before reaching the router, there may be the problem? 192.168.1.99 is the IP of my router , a Cisco WRT120N Thank you! Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo=29ms TTL=3 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=131 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=111 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=240 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=51 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Traceroute G:\Documents and Settings\Administrador>tracert 192.168.1.99 Traza a la dirección maxi2011 [192.168.1.99] sobre un máximo de 30 saltos: 1 <1 ms <1 ms <1 ms maxi2011 [192.168.1.99] Traza completa. G:\Documents and Settings\Administradorping 192.168.1.99 Haciendo ping a 192.168.1.99 con 32 bytes de datos: Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Estadísticas de ping para 192.168.1.99: Paquetes: enviados = 4, recibidos = 4, perdidos = 0 (0% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms G:\Documents and Settings\Administrador

  Read the article

• What is causing my internet to be slow on one laptop but not the other and only at a distance?

  - by Matt Case

  I have a newer laptop, purchased within the last year (acer aspire 7740). This laptop does not have any problem connecting to wireless networks and indicates that the signal strength is excellent on most of the wireless networks I connect to. When the laptop is within 10 feet of my wireless router it gets 30 down 10 up. When it is farther away than 10 feet it will be lucky to get 3 down and 1 up. I also have an older laptop, purchased in 2005, that has no problems at all at the same range. None of my phones, gaming consoles or tablets have this problem. I am beginning to think that the problem must be some hardware defect with the wireless card. I can provide additional information if needed. Just thought I'd check to see what others thought because I've been working on computers my whole life and have never heard of this happening. I have also tried to change the channels on my wireless router and have had no success with this idea.

  Read the article

• Can Internet data be used by malware when PC off?

  - by Val

  I have noticed over the last month that my off peak data has been used at a rate of approx 350MB per hour - this has meant that I have gone over my quota and slowed down by my ISP to 256k. There is no one in the house using it (2am-8am is my ISPs off peak hours) at that time. My PC and other wireless devices (ipad and iphone) are turned off. I have changed the wireless password on my modem 3 times and it is now 30 digits long. So I don't think someone else is using my wireless access between 2-8am. It has been suggested by my ISP that I may have malware/spyware on my computer. Sorry for my ignorance, but can malware still run if the PC is off? I did look at my modem's log and followed an IP address to a service called Amazon Simple server Storage. Could this company possibly be the culprit? I am not too tech savvy, so any assistance appreciated. I have run a barrage of spyware cleaning software eg malware bytes; spy bot etc.... Cheers Val

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >