Search Results

Search found 18897 results on 756 pages for 'network connectivity'.

Page 229/756 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

• Wireless networks are not detected at start up in Ubuntu 12.04

  - by Kanhaiya Mishra

  I have recently (three four days ago) installed Ubuntu 12.04 via windows installer i.e. wubi.exe. After the installation completed wireless and Ethernet were both working well. But after restart wireless networks didn't show up while in the network manager both networking and wireless were enabled. Though sometimes after boot it did show the networks available but very rarely. So I went through various posts regarding wireless issues in Ubuntu 12.04 and tried so many things but ended up in nothing satisfactory. I have Broadcom 4313 LAN network controller and brcmsmac driver. Then relying on some suggestions I tried to install bcm-wl driver but couldn't install due to some error in jockeyl.log file. Then i tried fresh installation of the same driver but still could resolve the startup issues with wireless. Then again I reinstalled Ubuntu inside windows using wubi installer. This time again same problem occurred after boot. But this time I successfully installed wl driver before disturbing file-system files of Ubuntu. But again the same issue. This time I noticed some new things: If I inserted Ethernet/LAN cable before startup then wireless networks are available and of course LAN(wired) networks also work. but if i don't plug in cable before startup and then plug it after startup then it didn't detect Ethernet network neither wireless. So I haven't noticed it before that LAN along with wifi also doesn't work after startup. But if i suspend the session and make it sleep and again login then it worked. I tried it every time that WLAN worked perfectly. But still i m unable to resolve that startup problem. Each time i boot first I have to suspend it once then only networks are available. It irritates me each time i reboot/boot my lappy. So please help out of this problem. Any ideas/help regarding this issue would be highly appreciated. Some of the commands that i run gave following results: # lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) # sudo lshw -C network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:49:b6:ab width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.1.7 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: b8:ac:6f:6b:f7:4a capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) # lsmod | grep wl wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl # sudo iwlist eth1 scanning eth1 Scan completed : Cell 01 - Address: 30:46:9A:85:DA:9A ESSID:"BH DASHIR 2" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:4/5 Signal level:-60 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD7F0050F204104A00011010440001021041000100103B000103104700109AFE7D908F8E2D381860668BA2E8D8771021000D4E4554474541522C20496E632E10230009574752363134763130102400095747523631347631301042000538333235381054000800060050F204000110110009574752363134763130100800020084 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: C0:3F:0E:EB:45:14 ESSID:"BH DASHIR 3" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-71 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD7F0050F204104A00011010440001021041000100103B00010310470010F3C9BBE499D140540F530E7EBEDE2F671021000D4E4554474541522C20496E632E10230009574752363134763130102400095747523631347631301042000538333235381054000800060050F204000110110009574752363134763130100800020084 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 03 - Address: A0:21:B7:A8:2F:C0 ESSID:"BH DASHIR 4" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:1/5 Signal level:-86 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD8B0050F204104A0001101044000102103B0001031047001000000000000010000000A021B7A82FC01021000D4E6574676561722C20496E632E10230009574E523130303076321024000456324831104200046E6F6E651054000800060050F20400011011001B574E5231303030763228576972656C6573732041502D322E344729100800020086103C000103 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s

  Read the article

• Microsoft Cloud Day - the ups and downs

  - by Charles Young

  The term ‘cloud’ can sometimes obscure the obvious.  Today’s Microsoft Cloud Day conference in London provided a good example.  Scott Guthrie was halfway through what was an excellent keynote when he lost network connectivity.  This proved very disruptive to his presentation which centred on a series of demonstrations of the Azure platform in action.  Great efforts were made to find a solution, but no quick fix presented itself.  The venue’s IT facilities were dreadful – no WiFi, poor 3G reception (forget 4G…this is the UK) and, unbelievably, no-one on hand from the venue staff to help with infrastructure issues.  Eventually, after an unscheduled break, a solution was found and Scott managed to complete his demonstrations.  Further connectivity issues occurred during the day. I can say that the cause was prosaic.  A member of the venue staff had interfered with a patch board and inadvertently disconnected Scott Guthrie’s machine from the network by pulling out a cable. I need to state the obvious here.  If your PC is disconnected from the network it can’t communicate with other systems.  This could include a machine under someone’s desk, a mail server located down the hall, a server in the local data centre, an Internet search engine or even, heaven forbid, a role running on Azure. Inadvertently disconnecting a PC from the network does not imply a fundamental problem with the cloud or any specific cloud platform.  Some of the tweeted comments I’ve seen today are analogous to suggesting that, if you accidently unplug your microwave from the mains, this suggests some fundamental flaw with the electricity supply to your house.   This is poor reasoning, to say the least. As far as the conference was concerned, the connectivity issue in the keynote, coupled with some later problems in a couple of presentations, served to exaggerate the perception of poor organisation.   Software problems encountered before the conference prevented the correct set-up of a smartphone app intended to convey agenda information to attendees.  Although some information was available via this app, the organisers decided to print out an agenda at the last moment.  Unfortunately, the agenda sheet did not convey enough information, and attendees were forced to approach conference staff through the day to clarify locations of the various presentations. Despite these problems, the overwhelming feedback from conference attendees was very positive.  There was a real sense of excitement in the morning keynote.  For many, this was their first sight of new Azure features delivered in the ‘spring’ release.  The most common reaction I heard was amazement and appreciation that Azure’s new IaaS features deliver built-in template support for several flavours of Linux from day one.  This coupled with open source SDKs and several presentations on Azure’s support for Java, node.js, PHP, MongoDB and Hadoop served to communicate that the Azure platform is maturing quickly.  The new virtual network capabilities also surprised many attendees, and the much improved portal experience went down very well. So, despite some very irritating and disruptive problems, the event served its purpose well, communicating the breadth and depth of the newly upgraded Azure platform.  I enjoyed the day very much.

  Read the article

• Type of computer for a developer on the road

  - by nabucosound

  Hi developers: I am planning to be traveling through eurasia and asia (russia, china, korea, japan, south east asia...) for a while and, although there are plenty of marvelous things to see and to do, I must keep on working :(. I am a python developer, dedicated mainly to web projects. I use django, sqlite3, browsers, and ocassionaly (only if I have no choice) I install postgres, mysql, apache or any other servers commonly used in the internets. I do my coding on vim, use ssh to connect, lftp to transfer files, IRC, grep/ack... So I spend most of my time in the terminal shells. But I also use IM or Skype to communicate with my clients and peers, as well as some other software (that after all is not mandatory for my day-to-day work). I currently work with a Macbook Pro (3 years old now) and so far I am very happy with the performance. But I don't want to carry it if I am going to be "on transit" for long time, it is simply huge and heavy for what I am planning to load in my rather small backpack (while traveling, less is more, you know). So here I am reading all kind of opinions about netbooks, because at first sight this is the kind of computer I thought I had to choose. I am going to use Linux for it, Microsoft is not my cup of tea and Mac is not available for them, unless I were to buy a Macbook air, something that I won't do because if I am robbed or rain/dust/truck loaders break it I would burst in tears. I am concerned about wifi performance and connectivity, I am going to use one of those linux distros/tools to hack/test on "open" networks (if you know what I mean) in case I am not in a place with real free wifi access and I find myself in an emergency. CPU speed should be acceptable, but since I don't plan to run Photoshop or expensive IDEs, I guess most of the time I won't be overloading the machine. Apart from this, maybe (surely) I am missing other features to consider. With that said (sorry about the length) here it comes my question, raised from a deep ignorance regarding the wars betweeb betbooks vs notebooks (I assume tablet PCs are not for programming yet): If I buy a netbook will I have to throw it away after 1 month on the road and buy a notebook? Or will I be OK? Thanks! Hector Update I have received great feedback so far! I would like to insist on the fact that I will be traveling through many different countries and scenarios. I am sure that while in Japan I will be more than fine with anything related to technology, connectivity, etc. But consider that I will be, for example, on a train through Russia (transsiberian) and will cross Mongolia as well. I will stay in friends' places sometimes, but most of the time I will have to work from hostel rooms, trains, buses, beaches (hey this last one doesn't sound too bad hehe!). I think some of your answers guys seem to focus on the geek part but loose the point of this "on the road" fact. I am very aware and agree that netbooks suck compared to notebooks, but what I am trying to do here is to find a balance and discover your experiences with netbooks to see first hand if a netbook will be a fail in the mid-long term of the trip for my purposes. So I have resumed the main concepts expressed here on this small list, in no particular order: keyboard/touchpad feel: I use vim so no need of moving mouse pointers that much, unless I am browsing the web, but intensive use of keyboard screen real state: again, terminal work for most of the time battery life: I think something very important weight/size: also very important looks not worth stealing it, don't give a shit if it is lost/stolen/broken: this may depend on kind of person, your economy, etc. Also to prevent losing work, I will upload EVERYTHING to the cloud whenever I'll have a chance. wifi: don't want to discover my wifi is one of those that cannot deal with half the routers on this planet or has poor connectivity. Thanks again for your answers and comments!

  Read the article

• Apache crashes, probably because of this piece of php code. Can you have a look?

  - by Munim

  I am working on the development of a web based application on codeigniter. I wrote this function to get the timezone data for any city or address. function gettimezone($address) { $_url = 'http://api.local.yahoo.com/MapsService/V1/geocode'; $_url .= sprintf('?appid=%s&location=%s',"phpclasses",rawurlencode($address)); $_result = false; if($_result = file_get_contents($_url)) { preg_match('!<Latitude>(.*)</Latitude><Longitude>(.*)</Longitude>!U', $_result, $_match); $lng = $_match[2]; $lat = $_match[1]; $url = "http://ws.geonames.org/timezone?lat={$lat}&lng={$lng}"; $timedata = file_get_contents($url); $sxml = simplexml_load_string($timedata); return $sxml->timezone; } else return false; } I am working on Windows 7 and xampp 1.7 (php 5.2.8). Is there any possible scenario where this piece of code would crash Apache? The application runs fine almost everytime, but I think running this piece of code when there is no internet connectivity or very poor internet connectivity (thereby no access to either of the webservices I have used) brings down the server. Something like this happened a few times and I think it was due to loss of internet connectivity but I am not sure what exactly is going on. [ By the way, feel free to use this piece of code. Makes 2 web service calls so don't use to too often in your application. Consider storing the results in a database.]

  Read the article

• Why could "insert (...) values (...)" not insert a new row?

  - by nang

  Hi, I have a simple SQL insert statement of the form: insert into MyTable (...) values (...) It is used repeatedly to insert rows and usually works as expected. It inserts exactly 1 row to MyTable, which is also the value returned by the Delphi statement AffectedRows:= myInsertADOQuery.ExecSQL. After some time there was a temporary network connectivity problem. As a result, other threads of the same application perceived EOleExceptions (Connection failure, -2147467259 = unspecified error). Later, the network connection was reestablished, these threads reconnected and were fine. The thread responsible for executing the insert statement described above, however, did not perceive the connectivity problems (No exceptions) - probably it was simply not executed while the network was down. But after the network connectivity problems myInsertADOQuery.ExecSQL always returned 0 and no rows were inserted to MyTable anymore. After a restart of the application the insert statement worked again as expected. For SQL Server, is there any defined case where an insert statment like the one above would not insert a row and return 0 as the number of affected rows? Primary key is an autogenerated GUID. There are no unique or check constraints (which should result in an exception anyway rather than not inserting a row). Are there any known ADO bugs (Provider=SQLOLEDB.1)? Any other explanations for this behaviour? Thanks, Nang.

  Read the article

• No Wi-Fi after system reboot

  - by ILya

  Something strange is happening... I've installed a Wi-Fi card into my Ubuntu Server 11.04 machine. To configure it I do the following: sudo vi /etc/network/interfaces add: iface wlan0 inet dhcp wpa-driver wext wpa-ssid "Sweet Home" wpa-ap-scan 1 wpa-proto WPA wpa-pairwise TKIP wpa-group TKIP wpa-key-mgmt WPA-PSK wpa-psk <A KEY> auto wlan0 then: $ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... ssh stop/waiting ssh start/running, process 1522 ssh stop/waiting ssh start/running, process 1590 And my machine successfully gets an ip to my wireless adapter. But after reboot it doesn't get any ip in wireless network. To fix it I run /etc/init.d/networking restart again and all is fine again - it gets an ip. I understand that I simply should add it to my startup scripts to make it work properly, but maybe there is a better way to configure it?

  Read the article

• Can't download web photo albums to Picasa

  - by Arcadie

  Someone has shared a Picasa web album (Limited, anyone with the link), but I can't download it to Picasa. The following alert appears: Firefox doesn't know how to open this address, because the protocol (picasa) isn't associated with any program. I have Picasa 3.0.0 installed on Ubuntu 11.04, I remember it saying something about registering the picasa protocol with Firefox during the installation. I have Firefox 6.0.2, and these settings are present in about:config network.protocol-handler.app.picasa;/usr/bin/picasa network.protocol-handler.expose.picasa;true network.protocol-handler.external.picasa;true Picasa is located here: $ which picasa /usr/bin/picasa Is there something I can do to make this work? PS: I hope this is not off-topic here, and I can't find the "picasa" tag. Could someone please add it, if appropriate?

  Read the article

• Thanks to NxtGenUG Manchester - Hyper-V for Developers presentation now available for download

  - by Liam Westley

  Thanks to Steve and Andy at NxtGenUG Manchester for making me very welcome and for the guys who didn't head down the pub for a Guinness for St Patrick's Day and came to NxtGen instead.  I hope you all got something from the presentation, if not technical insights, at least a can of Guinness of Tunnocks caramel wafer as swag. As promised here is the presentation in both PowerPoint and Adobe PDF format (with speaker notes), http://www.tigernews.co.uk/blog-twickers/nxtgenugmanc/hyperv4devs-ppt.zip http://www.tigernews.co.uk/blog-twickers/nxtgenugmanc/hyperv4devs-pdf.zip Since I gave the presentation Microsoft has released XP Mode (Windows Virtual PC for use under Windows 7) without the requirement for hardware virtualisation. Read more about that here, http://blogs.msdn.com/Virtual_PC_Guy/ For anyone who has seen this presentation at other user groups, there is a new section at the end of the presentation dealing with the various networking configurations under Hyper-V; not connected, private network, internal network and external network.  This includes details of what these mean, and a Venn diagram to aid understanding of the implications.

  Read the article

• Virtualbox: host only networking - proxy internet connection

  - by Russell

  I'll ask my question first, then give details about where I am coming from: Is it possible to use host only, then have ubuntu act as a proxy to provide internet access to windows? If so, how? I am trying to get the right combination of networking for my virtualbox windows client VM (win7). My host is ubuntu 10.10 (maverick). I believe I understand the basic network options (please correct me if I am incorrect): NAT - Host can't communicate with guest but guest has access to all host's adapters Host only - Separate adapter but guest has no net access Bridged - bridge an adapter in the host with the virtual adapter to give the host access to the host adapter I am trying to give my win guest internet access, but also access the host in a separate network. Bridged only works when the host is connected to the internet (this is a laptop) so when it's not connected the network is down. Thanks I appreciate your help.

  Read the article

• Continue with out a default route?

  - by user2009

  I am doing a complete unattended install of Ubuntu 12.04. I am doing static network configuration. Here is content for Static network configuration from the preseed file. d-i netcfg/disable_dhcp boolean true d-i netcfg/no_default_route boolean true d-i netcfg/get_nameservers string 192.168.1.254 d-i netcfg/get_ipaddress string 192.168.1.13 d-i netcfg/get_netmask string 255.255.255.0 d-i netcfg/get_gateway string 192.168.1.1 d-i netcfg/confirm_static boolean true Still is asking "Continue without a default route?". I have to say , then only installed is going ahead. Am passing preseed file via network (preseed/url). How to avoid this manual intervention? Does the order of netcfg statements matter?

  Read the article

• How to boot Ubuntu 12.04-64bit from a USB from Compaq CQ58

  - by user208092

  I try to boot Ubuntu 12.04, 64-bit on my Compaq CQ58 laptop from a USB but it is not working. I've correctly installed the Ubuntu on my pen drive following the instructions on Ubuntu website. (http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows) These are my BIOS settings: Post Hotkey Delay (sec) <0 CD-ROM Boot Internal Network Adapter Boot Network Boot Protocol Legacy Support Secure Boot Platform Key Enrolled Pending Action None Clear All Secure Boot UEFI Boot Order: USB Diskette on Key/USB Hard Disk OS Boot Manager Internal CD/DVD ROM Drive ! Network Adapter With these settings when i restart my computer what shows up is: Boot Device Not Found. This is what I get on the Boot Manager: Boot Option Menu OS boot Manager Boot From EFI File (Arrow Up) and (Arrow Down) to change option, ENTER to select an option. Press F10 to BIOS Setup Options, ESC to exit. PLEASE HELP... P.S. My laptop has windows 8

  Read the article

• Cannot add repository key

  - by William Anthony

  I just installed my new laptop with ubuntu 12.04 and when I'm trying to add key, there is a "network unreachable" error. william@ubuntu:~$ gpg --keyserver hkp://keys.gnupg.net --recv-keys 1C4CBDCDCD2EFD2A gpg: requesting key CD2EFD2A from hkp server keys.gnupg.net ?: keys.gnupg.net: Network is unreachable gpgkeys: HTTP fetch error 7: couldn't connect: Network is unreachable gpg: no valid OpenPGP data found. gpg: Total number processed: 0 I'm so sure the keyserver is not down, because I tried it again at my old laptop running ubuntu 11.04 william@william:~$ gpg --keyserver hkp://keys.gnupg.net --recv-keys 1C4CBDCDCD2EFD2A gpg: requesting key CD2EFD2A from hkp server keys.gnupg.net gpg: key CD2EFD2A: "Percona MySQL Development Team <[email protected]>" not changed gpg: Total number processed: 1 gpg: unchanged: 1 Is this a bug?

  Read the article

• Error on restarting networking :SIOCSIFFLAGS

  - by Paddington

  I have a sever with 2 network cards, an internal IP on one card (eth0) and external IPs (aliased) on the other card (eth1). I lost connection the public network and I tried to restart networking with /etc/init.d/networking restart and got the error "SIOCSIFFLAGS: cannot assing requested IP and Failed to bring up eth1". I even added the IPs in the interfaces file but still got an error on restarting. I could not ping my default gateway. A work around was to add ifconfig eth 0 x.x.x.x route -add default gw x.x.x.z I could then connect to the public network. What could be the issue here?

  Read the article

• Ralink RT3060 Driver not working

  - by Hoerlle

  I am new to linux. I was using fedora and now switching to Ubuntu for a try. On Fedora my wireless network card was working OK from the OS install (I didnt had to do anything for it to work) On Ubuntu, with the lspci -v command, I get: Network controller: Ralink corp. RT3060 Wireless 802.11n 1T/1R Subsystem: Ralink corp. RT3060 Wireless 802.11n 1T/1R Flags: bus master, slow devsel, latency 64, IRQ 20 Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2800pci Kernel modules: rt2800pci But I am not able to find any wireless network. What to do now? Thanks

  Read the article

• How to set-up DSL dialer for Ubuntu 12.04 LTS

  - by Mohammad Yaseen

  I have just installed Ubuntu 12.04 LTS and I'm unable to get my DSL dialer working properly. To set this up in Windows 7 I had to do following: Control Panel --- Network and Intertnet Network and sharing center --- Setup a new network or connection Connect to the internet --- Broadband PPPoE Enter username and Password.. CLick 'Connect' and Done. I am doing following steps in Ubuntu with no luck: Click on 'Two Arrows' (i don't know what they are called) on upper right corner. Configure VPN --- DSL tab --- Add Then I entered username, password, MAC address and Clone MAC address (copied from Auto Ethernet). Save The same set up used to work with Ubuntu 10.10 but it is not working here. Now whenever I click on DSL Connection 1 to connect dialer 'Auto Ethernet' gets disconneted and I end up with no Internet connection. I am new to Ubuntu, Please suggest some easy steps. I have installed ubuntu alongside windows. And dialer works fine in Windows environment, i am writing this in Windows .

  Read the article

• Will an Atheros AR928X work with WPA2?

  - by Tommy

  Basically I need only the answer to above question. Please think of that I am new to linux. For further explanation here is the full story: I have the following problem. My friends notebook (Vista) has got a trojan and refuses to work anymore. The Avira Rescue CD did not help either. So I tried an old (9.1) Ubuntu CD and backed up all the essential files. Since we have no Windows Install Disk we want to put Ubuntu on that notebook. But with the 9.1 version there is no WLAN. Systemtest tells me, that it finds an Atheros AR928X, but ifconfig does not show that and the network manager tells me there are no LAN/WLAN devices. So: does that work easier with the new Ubuntu version or is that network adapter a known troublemaker? And: if I get the adapter to work, will it work with the WPA2-network around here?

  Read the article

• How can I make a permanently updated copy of a file in a different place to the original file?

  - by Mark

  I use two computers, a Linux one for coding and building and a Windows one which has the programming application to load the built program onto the hardware. Both computers have access to a network drive which I use to pass the files from Linux to Windows. My problem is, that every time I build I have to copy the files from where the are created to the network drive. How can I make some sort of file in the network drive on Ubuntu that always mirrors the file which is built in the different location, like a pointer? Thanks!

  Read the article

• Announcement Oracle Solaris 11.1 Availability!

  - by uwes

  On 25th of October Oracle announced the availability of Oracle Solaris 11.1. Highlights include: 8x faster database startup and shutdown and online resizing of the database SGA with a new optimized shared memory interface between the database and Oracle Solaris 11.1 Up to 20% throughput increases for Oracle Real Application Clusters by offloading lock management into the Oracle Solaris kernel Expanded support for Software Defined Networks (SDN) with Edge Virtual Bridging enhancements to maximize network resource utilization and manage bandwidth in cloud environments 4x faster Solaris Zone updates with parallel operations shorten maintenance windows New built-in memory predictor monitors application memory use and provides optimized memory page sizes and resource location to speed overall application performance. More information could be found under the following links: Oracle Solaris 11.1 Data Sheet  What's New in Oracle Solaris 11.1 Oracle Solaris 11.1 FAQs Oracle.com Oracle Solaris page Oracle Technology Network Oracle Solaris page Resources for downloading: Download Solaris 11.1 Order Solaris 11.1 media kit Existing customers can quickly and simply update using the network based repository

  Read the article

• Not able to connect huawei ec1561

  - by Nixon Babu

  I have a huawei ec1561 broadband data card, ISP-MTS India. I am not able to connect internet through it. while connecting it via network manager it says "You are registered with home network" and again "Modem network disconnected" . i think it is detected as a modem but not connecting properly. Any help please? I'm hitting this rock with my head more than a month... when I tried installing the driver that came with the device it finally says "Installing NDIS driver failed". I can post further information if anybody helps

  Read the article

• Ubuntu 12.04 Problem connecting Internet by Mobile Broadband through LG GU220

  - by arnab.b

  I am using Ubuntu 12.04. I use my LG cellphone titled GU220 using Aircel connection .. The phone gets connected as an USB device well enough bt the network always fails to connect whenever I try to connect through mobile broadband.. I also have Windows 7 which does not fails to connect the network through PC Suite. tried it several times even after restarting both phone and Ubuntu bt in vain. Also fr 1st two days things worked well and the network was well connected, the problem started just after those two days-in from the next login..

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• Announcement: Oracle Solaris 11.1

  - by uwes

  On October 3rd at Oracle OpenWorld John Fowler announced Oracle Solaris 11.1 . This first update to Oracle Solaris 11 increases uptime for the Oracle Database: 8x faster database shutdown and start-up Helps DBAs find and resolve I/O issues increasing performance 1.2x Oracle RAC throughput Oracle Solaris 11.1 drives up network utilization by extending network virtualization to include Edge Virtual Bridging and Data Center Bridging that help manage network bandwidth for high priority services and applications. Learn more and share these valuable tools with your customers to encourage them to deploy Oracle Solaris 11.1 Read Press Release here Oracle Solaris 11.1 Data Sheet (PDF) What's New in Solaris 11.1 Oracle Solaris 11.1 FAQs Join the the online web event Oracle Solaris 11 Innovations for your Data Center on November 7, 2012

  Read the article

• Unable to set default gateway

  - by GrandMasterFlush

  I'm running Ubuntu server via Hyper-V and have successfully installed it but seem unable to ping the server or ping any other machines on the network from the server. After doing a bit of reading I've noticed that the default gateway isn't set but when I try and set it I keep getting error messages which I can't understand. From this article I've tried ip route add default via 10.0.10.200 Which reports: RTNETLINK answers: Operation not permitted If I try running it prefixed with sudo but it reports: `RNETLINK answers: No such process I've editted /etc/network/interfaces but when I start the machine and type netstat -nr there is nothing listed. Can anyone tell me where I'm going wrong please? EDIT : /etc/network/interfaces contains: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp

  Read the article

• What is needed for a networked home printer?

  - by Jay

  I've seen this question: Home network printer recommendations but I think I'm asking something more basic. I'm not really familiar with networked printers or how they work or what they do really. What I'd like is to have a printer that is accessible to anyone connected to my home network, without having to plug into the printer itself. An alternative setup might to be to have a printer that is always hooked up to one computer, like a desktop, that is almost always on and allows other computers connected on the network to print to it as well. I believe the first option is called a networked printer and the second is printer sharing. But again I'm new to this so I don't really know the details or if I'm using the correct terminology. I was wondering if someone might be able to shed some light on this and let me know what is needed for either of these setup. Thanks.

  Read the article

• Broadcom STA driver doesn't work well with BCM4313

  - by Oli

  Following on from my other question about our new Samsung Q330, I've noticed that the wireless is incredibly flakey. It can connect but after a little use, especially if it does a lot of downloading at once (read: install something from the Software Centre), the connection stops working. Network Manager still see the connection, there's just no network throughput. I've simple tests like pinging other local network hosts and they just fail. The Samsung Q330 has a Broadcom BCM4313 wifi card (it's proper ID: 14e4:4727) and it's running on the Broadcom STA drivers that Jockey suggests (it didn't work at all without this). I did try installing b43-fwcutter but this just didn't do anything. I was expecting a configuration screen to come up (to select a firmware) but it never did. This page suggests the newer brcm80211 driver might be able to help, but I don't know how to install that. If you think this is the right route, please let me know how one goes about installing it.

  Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >