Search Results

Search found 25894 results on 1036 pages for 'hard disk space'.

Page 23/1036 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Clicks or ticks every minute when HDD is idle [closed]

    - by Ramy
    Possible Duplicate: Clicks or ticks every minute when HDD is idle My HDD is a My passport... It's 2 weeks old. I hear this tick or click followed by another one about 8-9 secs later, and they repeat every minute almost exactly... They usually happen and the LED light blinking.. It's not like the other clicks you hear that indicate any inevitable HDD failure, it's much lower in volume. I don't know what that is, however it's different than the rest of the HDD usual sounds...It's close to the sound of the mouse click. It sometimes also happens when I access a file on the drive mostly after being idle for a while, sometimes randomly not really sure... The drive though is working well, the SMART report comes out OK and without warning, and disk management shows it healthy... What could be the cause of this??

    Read the article

  • Files turned into folders on external hard drive

    - by Kashif
    I have a networked hard drive where I like to store audio/video/software and all sorts of other files for my house. While the software files are all intact and working, many of my video and audio files have been turned into folders! Can anyone explain why this is happening, how I can prevent it, and if it is possible to revert these "folders" back into files. Thanks much! An example of what the folders are named: "Highschool Graduation.avi", "Birthday party.avi", "Somesong.mp3" The HDD is connected to a Linksys E4200 router (Firmware Version: 2.0.37). This is how the HDD is networked.

    Read the article

  • Ubuntu 12.04 doesn't detect hard disk partitions

    - by m0skit0
    I just installed Ubuntu 12.04 32-bit on an ASUS Laptop and wanted to install it in another one, the ASUS A55V. After booting the laptop and setting up Windows 7 (I unfortunately cannot wipe out Windows), and creating one extra partition to install Ubuntu there, when I reboot from USB and launch Ubuntu installation, it doesn't recognize any partition on /dev/sda, but shows the whole disk as unpartitioned. I guess this is due to UEFI, but I don't know how I can make Ubuntu see the partitions created by Windows. Or any workaround for this to be able to install Ubuntu on /dev/sda. Thanks in advance

    Read the article

  • Hard drive caught malware and all folders are in shortcuts

    - by Ammar
    I have an external hard drive from Seagate. I think it accidently caught a malware/virus, since all the files in there became shortcut folders. I have very important folders and now I cannot access them at all. I did not have an antivirus program; I just formatted the PC and forgot to install one. Just recently, I installed Avira and it caught the malware, but since I removed the malware via Avira, I can't access anything now. Please help me on what I need to do. I am really lost.

    Read the article

  • Which file system to choose from when formatting 1.5TB hard drive (hdd)

    - by MaxiWheat
    I plan to buy a 1.5TB hard drive soon. I would like to know which file system to choose from when I'm gonna format it. With FAT32, there is a limitation concerning the maximum file size (4GB) that bugs me since I might save large files such as DVD images which are over 4GB. On the other hand, NTFS allows me to save larger files, but seems less compatible with other OS than Windows and is also proprietary to Microsoft. Are there other alternatives ? Can you give me your advices ?

    Read the article

  • One hard drive missing after converting from ide to ahci

    - by user700859
    I have two 500GB SATA HDD in my desktop running XP. After converting from IDE to AHCI, the HDD I use to store data can no longer be accessed from XP. It shows only the first partition as 150GB, and data type is listed as RAW. However, if I boot into a live linux environment or if I pull that HDD out and connect it using USB, I can still get to all my files again. So I completely formatted the HDD into one single partition. But XP still does not recognize it. It still shows the disk as the 150GB partition and data type is still RAW. What's going on and how do I fix this? Thanks in advance.

    Read the article

  • Cloning Windows 2003 Server to new hard drive results in failure

    - by Level1Coder
    Scenario: Old hdd is a Seagate 320gb SATA drive New hdd is a WD 320gb SATA drive Created an exact clone and replaced old hdd with new hdd. Boot up with new hdd, it gets into Windows 2003 server environment but things look weird. Lots of system event failures in the event viewer log. System is barely unusable, critical services are all down. Boot up with old hdd, everything is fine. QUESTION: Is it possible to do a simple clone of a Windows 2003 server system? All I'm changing is the hard drive, everything else stays the same (old CPU/old mobo/etc..)

    Read the article

  • Tests for hard drive health

    - by Samik R
    I have a 5-year old hard drive (bought new at the time), but it was sitting in my closet for 5 years, unused. I have just started using it, and seems to be getting a whirring sound (rather distinct from the other noises like fans etc.). I ran a few diagnostics tests, like Seagate's SeaTools, and the SMART test, and a few generic tests and all passed. Should I be concerned? Is there any other test that I should run? It's an internal IDE WD 5400RPM drive. Being used for a desktop, which is itself pretty high-end (AMD Phenom II X6 1100T, AMD Radeon GPU etc.), but would be used rather occasionally to begin with (avg. 1-2 hrs. per day). Thanks for any pointers.

    Read the article

  • Converting an external hard drive to internal

    - by Nathan DeWitt
    I have a WD Elements 1 TB external drive. I'm in a pinch and I need an internal SATA drive. How do I find out if the drive in here is actually a SATA drive? Edit: The WD Elements is a really nice external drive. I gently pried open the top and slid out a 1 TB Caviar Green hard drive. There were four black rubber brackets that slid off easily. One screw removed the SATA -- USB, and then I slid it into my computer.

    Read the article

  • Computer doesn't boot, continuously restarts; possible disk error

    - by Olcay Ertas
    I have shut down my computer two hours ago. When I open my computer it started restarting itself after showing the POST screen. I can open my computer with a Ubuntu Live CD or Windows installation CD. I can also open and boot my computer with my second drive, so I think something is wrong with my primary hard drive. Do you have any idea what the problem might be and how can I fix it? I am using an HP DV9087EA laptop and my primary disk is a WD500GB. I have installed Ubuntu 10.10 and Windows 7 on my drive.

    Read the article

  • Can a power loss break an hard disk?

    - by dag729
    Today I was working when all of a sudden a power loss (in the entire house) occurs. I tried to reboot the machine but it states that there's an "Ebios error"; tried with an Ubuntu 9.04 live cd and while booting it states that there are various I/O errors on the first partition (the one with the boot sector). Now I managed to backup all of my data (using the live cd aforementioned) but I don't know if it'll worth the hassle of a reinstallation (and if it could do something useful) or if the only thing to do is to drop the hard disk as far as possible... Thanks in advance.

    Read the article

  • How can I format my active hard drive to NTFS?

    - by Ghost
    Believe it or not, I'm not too happy with Ubuntu. Well, let me rephrase that. I like it, but the only thing I don't like about it is that it's too much of a hassle to get a game to work. I'm trying to install Windows 7 with a 4GB flash drive, but my error that comes up is that my hard drive I'm trying to install on is in ext4. I need to format it to read NTFS. I can't seem to find any topics on how to format an active hard drive. I found a topic that explains how to move Ubuntu to a new drive, but it's a bit confusing to me. Please help! (Please don't disregard this topic just because I want to go back to windows)

    Read the article

  • System stuttering caused by hard drive

    - by LukLed
    My system keeps freezing for about 1-2 second every time I try to do something. For example, when I enter URL in browser, it freezes and starts working after few seconds. It is probably related to hard drive. I installed HD tune and when benchmark is in progress, causing constant disk use, everything works fine in background, there are no lags. What can be the reason of this issue? My hardware is Acer Aspire 7740G-6969 running on Windows 7.

    Read the article

  • EXT4 external hard drive for use with multiple systems

    - by EXTdumb
    I recently bought a external hard drive to store some data on. I use Linux but I am not a power user. If I format the drive to EXT4, is it possible for the permissions to ever screw up and I lost access to my data? I will be plugging the drive into several different linux based computers at work and I frequently hop distros on my main home machine. I need to make sure I don't lose any data because I overlooked something. I am not familiar with EXT 3 or 4. So far I have done this : Formatted drive to EXT4 ran gksudo thunar and changed the permissions to my user account and all settings to read/write Wrote all the files I need to the drive I really appreciate any help.

    Read the article

  • "Device Not Ready" when attempting to connecting an old (DOS) hard drive to windows 7

    - by Christopher Vigliotti
    I have an old Western Digital Caviar 2540 hard drive that I am attempting to connect to a Windows 7 machine by using a Bytecc BT-300 USB 2.0 to IDE/SATA Adapter. I'm connecting things in the right order (power, then sata, then usb) and the jumper settings on the drive are at present set to slave, but am still having an issue. I am recieving a message that the drive is not initialized. When I go into Computer Management I can see the drive (as "Disk 5, Unknown, Not Initialized"), but when I attempt to initialize it or right-click and select "Offline" It tells me that "the device is not ready". Is there something that I can to to get around this, connect the drive and copy the data that I need off of this drive? Is there a third party tool available that I can use?

    Read the article

  • Windows 7 - cannot access my own external disk

    - by Tomas
    I use Windows 7 Home Premium and external USB disk with NTFS partition. I cannot write-access the my own files on it, even as a member of Admnistrators group! Is there any way how to go around this permission checking, without actually writing some permission information to every folder on it? I have 3 external disks (up to 1TB), and I have thousands hundreds of files on each!!! Doing some permission change, that will actually go recursivelly through all folders on all my disks is plain brain damage!! 1) Is there any way how to change it somehow globally? (like mount options...) .. Or how to go around this annoying permission checking? It was working in Win XP normally! 2) if not, and I must do the recursive operation on all folders, how to do it PERMANENTLY, so that I don't need to do it again on another Windows 7 computer!

    Read the article

  • Windows 7 slowing down during hard drive activity

    - by Iniquities of evil men
    Sometimes when normally using my PC, it will (seemingly) randomly slow down, and maybe sometimes even freeze for several seconds. During this slow down period, it looks like a (I don't know which drive it is) hard drive is constantly being written to. During the last slow down, I started Windows's Ressource Monitor and found out that the System process was writing up to 10MB/s to a drive (I suspect it's the system drive, C:\, but I don't know for sure). I'm not doing anything unusual (at least, I don't think I am), and most of the time, it will work normally, but, as I said, it just randomly slows down for some times. Any ideas on what might be causing this and how I can prevent this from happening again? (I have a triple-core processor and 4GB of RAM. My system drive is a WD Caviar Black 500GB, my secondary, 'data' drive is a Samsung drive, which I don't know the model number of, but I can look it up. I can also post my full PC specs if needed.)

    Read the article

  • Do hard drives have to be mounted somewhere?

    - by TheLQ
    I'm creating a cheap JBOD box with ~7 IDE hard drives. However when you take into account 3 existing drives + 2 CD drives that are installed as well, I am out of mounting places inside the server. Will I adversely affect or harm the drives if I just stack them on top of each other in the box? Before you ask if they are going to fall over, this box won't be moved and won't really be touched while its in use. Heat (should) be taken care of by the fans. However I am worried about the vibrations that each drive will put out. Is this an actual issue?

    Read the article

  • How to clone & restore virtual box hard drive

    - by user23950
    What I want to do is to clone my virtual box hdd with dual boot os. Xp and Vista. I'm using acronis and back it up on a flash drive. And end up with the flash drive that is partitioned. 2 partitions just like the virtual box hard disk. What do I do to restore it. I'm running acronis inside virtual box. What do I do to make use of the backup and actually restore what I've back up. And to be able to boot to xp and vista again inside virtual box. Please help.

    Read the article

  • Defrag/TRIM settings for hybrid hard drive?

    - by Joel Coehoorn
    I recently acquired a momentus XT hybrid hard drive. This is a tradition spinning HDD with a small SSD portion for frequently used files. Normally, you are not supposed to defrag SSDs, as it does not help performance and can significantly reduce the life of the drive. But you do need to defrag an HDD to keep good performance. So where does that leave us for hybrid drives? Do I need to turn off defragging in Windows to preserve the SSD portion? Is the on-disk controller smart enough to handle defragging correctly? Is there some utility I need to set it up that I missed? Additionally, for SSDs you normally want to check for and enable TRIM support... but this makes no sense for a HDDs. Where does that leave us for hybrid drives? Should I try to enable TRIM or not?

    Read the article

  • Solaris kstat sdX disk nread counter value decreasing

    - by mykhal
    I get strange disk io nread (bytes read) counter values (from kstat) on Solaris. Example of collected nread value for sd6 disk collected in 30s interval (command kstat -n sd6): 768579416 768579416 768579416 768579416 768579416 768579416 768579416 768496080 768496080 768496080 768496080 768496080 768496080 768496080 768496080 768530896 768530896 768447560 768447560 768447560 One would suppose that the relative read bytes count can't be negative.. I wonder what can couse this situation and whether there is more reliable disk io data available. Some info about the system: machine:~ # uname -a SunOS machine 5.10 Generic_127112-11 i86pc i386 i86pc machine:~ # cat /etc/release Solaris 10 11/06 s10x_u3wos_10 X86 Copyright 2006 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 14 November 2006

    Read the article

  • Debian can't see one of my hard drives

    - by nask00s
    Today I installed Linux Debian in dual boot with Windows 7. I have 3 hard drives, two for starage and one for the operating systems. The problem is with the two storage drives which are exactly same. In debian I can only see one of them. Before Debian I had Ubuntu and there wasn't any problem. Also I didn't changed anything from that drive. What should I do? I don't want to format it or delete anything.

    Read the article

  • Dual Boot not recognizing new hard drive

    - by Grove
    I am a complete Linux newb..which will become obvious shortly. The story: I wanted to dual boot with Ubuntu. I already had windows on 1 hard drive (320gb), and I wanted Ubuntu on a 2nd hard drive (2tb). I setup the partitions using the "Something else" option - I left the first hard drive alone, and put a swap and a ext4 partition on the 2nd hard drive. When it asked me where the bootable device was, I put the first hard drive. The problem: Now that Ubuntu is installed and grub lets me pick which os to boot to, I boot to ubuntu JUST FINE. BUT when I go to the home folder and look at devices, the only drive showing is the 320 gb/old hard drive that windows was installed on. I can not see the 2 TB hard drive anywhere. This is strange because I setup the Ubuntu partition to be the 2 TB hard drive and I thought I installed ubunto on that partition. Thank you for your time and patience :)

    Read the article

  • How to force a hard drive to shut down

    - by Phenom
    I have a hard drive in my computer that I'm not using. I want Windows 7 to shut it down. I don't want to have to manually remove the cable. (The reason is that for some strange reason my computer will not boot if it's not connected. disk boot failure after upgrading power supply) I know that Windows 7 will shut it down after a certain period of time of it not being used. How can I force it to shut down without having to wait for this?

    Read the article

  • problems mounting an external IDE drive via USB in ubuntu

    - by Roy Rico
    I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >