Search Results

Search found 560 results on 23 pages for 'pascal fc'.

Page 23/23 | < Previous Page | 19 20 21 22 23 

  • Processing incorrect mac addresses from 802.11 frames with pcap

    - by Quentin Swain
    I'm working throurgh a project with pcap and wireless. Following an example posted in response to oe of my earlier questions I am trying to extract the mac addresses from wireless frames. I have created structures for the radiotap header and a basic management frame. For some reason when it comes to trying to output the mac addresses I am printing out the wrong data. When I compare to wireshark I don't see why the radio tap data is printing out correctly but the mac addresses are not. I don't see any additional padding in the hex dump that wireshark displays when i look at the packets and compare the packets that I have captured. I am somewhat famialar with c but not an expert so maybe I am not using the pointers and structures properly could someone help show me what I am doing wrong? Thanks, Quentin // main.c // MacSniffer // #include <pcap.h> #include <string.h> #include <stdlib.h> #define MAXBYTES2CAPTURE 65535 #ifdef WORDS_BIGENDIAN typedef struct frame_control { unsigned int subtype:4; /*frame subtype field*/ unsigned int protoVer:2; /*frame type field*/ unsigned int version:2; /*protocol version*/ unsigned int order:1; unsigned int protected:1; unsigned int moreDate:1; unsigned int power_management:1; unsigned int retry:1; unsigned int moreFrag:1; unsigned int fromDS:1; unsigned int toDS:1; }frame_control; struct ieee80211_radiotap_header{ u_int8_t it_version; u_int8_t it_pad; u_int16_t it_len; u_int32_t it_present; u_int64_t MAC_timestamp; u_int8_t flags; u_int8_t dataRate; u_int16_t channelfrequency; u_int16_t channFreq_pad; u_int16_t channelType; u_int16_t channType_pad; u_int8_t ssiSignal; u_int8_t ssiNoise; u_int8_t antenna; }; #else typedef struct frame_control { unsigned int protoVer:2; /* protocol version*/ unsigned int type:2; /*frame type field (Management,Control,Data)*/ unsigned int subtype:4; /* frame subtype*/ unsigned int toDS:1; /* frame coming from Distribution system */ unsigned int fromDS:1; /*frame coming from Distribution system */ unsigned int moreFrag:1; /* More fragments?*/ unsigned int retry:1; /*was this frame retransmitted*/ unsigned int powMgt:1; /*Power Management*/ unsigned int moreDate:1; /*More Date*/ unsigned int protectedData:1; /*Protected Data*/ unsigned int order:1; /*Order*/ }frame_control; struct ieee80211_radiotap_header{ u_int8_t it_version; u_int8_t it_pad; u_int16_t it_len; u_int32_t it_present; u_int64_t MAC_timestamp; u_int8_t flags; u_int8_t dataRate; u_int16_t channelfrequency; u_int16_t channelType; int ssiSignal:8; int ssiNoise:8; }; #endif struct wi_frame { u_int16_t fc; u_int16_t wi_duration; u_int8_t wi_add1[6]; u_int8_t wi_add2[6]; u_int8_t wi_add3[6]; u_int16_t wi_sequenceControl; // u_int8_t wi_add4[6]; //unsigned int qosControl:2; //unsigned int frameBody[23124]; }; void processPacket(u_char *arg, const struct pcap_pkthdr* pkthdr, const u_char* packet) { int i= 0, *counter = (int *) arg; struct ieee80211_radiotap_header *rh =(struct ieee80211_radiotap_header *)packet; struct wi_frame *fr= (struct wi_frame *)(packet + rh->it_len); u_char *ptr; //printf("Frame Type: %d",fr->wi_fC->type); printf("Packet count: %d\n", ++(*counter)); printf("Received Packet Size: %d\n", pkthdr->len); if(rh->it_version != NULL) { printf("Radiotap Version: %d\n",rh->it_version); } if(rh->it_pad!=NULL) { printf("Radiotap Pad: %d\n",rh->it_pad); } if(rh->it_len != NULL) { printf("Radiotap Length: %d\n",rh->it_len); } if(rh->it_present != NULL) { printf("Radiotap Present: %c\n",rh->it_present); } if(rh->MAC_timestamp != NULL) { printf("Radiotap Timestamp: %u\n",rh->MAC_timestamp); } if(rh->dataRate != NULL) { printf("Radiotap Data Rate: %u\n",rh->dataRate); } if(rh->channelfrequency != NULL) { printf("Radiotap Channel Freq: %u\n",rh->channelfrequency); } if(rh->channelType != NULL) { printf("Radiotap Channel Type: %06x\n",rh->channelType); } if(rh->ssiSignal != NULL) { printf("Radiotap SSI signal: %d\n",rh->ssiSignal); } if(rh->ssiNoise != NULL) { printf("Radiotap SSI Noise: %d\n",rh->ssiNoise); } ptr = fr->wi_add1; int k= 6; printf("Destination Address:"); do{ printf("%s%X",(k==6)?" ":":",*ptr++); } while(--k>0); printf("\n"); ptr = fr->wi_add2; k=0; printf("Source Address:"); do{ printf("%s%X",(k==6)?" ":":",*ptr++); }while(--k>0); printf("\n"); ptr = fr->wi_add3; k=0; do{ printf("%s%X",(k==6)?" ":":",*ptr++); } while(--k>0); printf("\n"); /* for(int j = 0; j < 23124;j++) { if(fr->frameBody[j]!= NULL) { printf("%x",fr->frameBody[j]); } } */ for (i = 0;i<pkthdr->len;i++) { if(isprint(packet[i +rh->it_len])) { printf("%c",packet[i + rh->it_len]); } else{printf(".");} //print newline after each section of the packet if((i%16 ==0 && i!=0) ||(i==pkthdr->len-1)) { printf("\n"); } } return; } int main(int argc, char** argv) { int count = 0; pcap_t* descr = NULL; char errbuf[PCAP_ERRBUF_SIZE], *device = NULL; struct bpf_program fp; char filter[]="wlan broadcast"; const u_char* packet; memset(errbuf,0,PCAP_ERRBUF_SIZE); device = argv[1]; if(device == NULL) { fprintf(stdout,"Supply a device name "); } descr = pcap_create(device,errbuf); pcap_set_rfmon(descr,1); pcap_set_promisc(descr,1); pcap_set_snaplen(descr,30); pcap_set_timeout(descr,10000); pcap_activate(descr); int dl =pcap_datalink(descr); printf("The Data Link type is %s",pcap_datalink_val_to_name(dl)); //pcap_dispatch(descr,MAXBYTES2CAPTURE,1,512,errbuf); //Open device in promiscuous mode //descr = pcap_open_live(device,MAXBYTES2CAPTURE,1,512,errbuf); /* if(pcap_compile(descr,&fp,filter,0,PCAP_NETMASK_UNKNOWN)==-1) { fprintf(stderr,"Error compiling filter\n"); exit(1); } if(pcap_setfilter(descr,&fp)==-1) { fprintf(stderr,"Error setting filter\n"); exit(1); } */ pcap_loop(descr,0, processPacket, (u_char *) &count); return 0; }

    Read the article

  • How can I change 'self.view' within a button method created outside of 'loadView'

    - by Scott
    Hey guys. So I am creating buttons dynamically within loadView. Each of these buttons is given an action using the @Selector method, such as : [button addTarget:self action:@selector(showCCView) forControlEvents:UIControlEventTouchUpInside]; Now that showCCView method is defined outside of loadView, where this above statement is located. The point of the method is to change the view currently on the screen (so set self.view = ccView). It gives me an error every time I try and access self.view outside of loadView, and even sometimes when I try and access it at random places within loadView, it just has been acting really weird. I tried to change it around so I wouldn't have to deal with this either. I had made a function + (void) showView: (UIView*) oldView: (UIView*) newView; but this didn't work out either because the @Selector was being real prissy about using it with a function that needed two parameters. Any help please? Here is my code: // // SiteOneController.m // InstantNavigator // // Created by dni on 2/22/10. // Copyright 2010 __MyCompanyName__. All rights reserved. // #import "SiteOneController.h" @implementation SiteOneController + (UIView*) ccContent { UIView *ccContent = [[UIView alloc] initWithFrame:[[UIScreen mainScreen] applicationFrame]]; ccContent.backgroundColor = [UIColor whiteColor]; [ccContent addSubview:[SiteOneController myNavBar1:@"Constitution Center Content"]]; return ccContent; } // Button Dimensions int a = 62; int b = 80; int c = 200; int d = 30; // NPSIN Green Color + (UIColor*)myColor1 { return [UIColor colorWithRed:0.0f/255.0f green:76.0f/255.0f blue:29.0f/255.0f alpha:1.0f]; } // Creates Nav Bar with default Green at top of screen with given String as title + (UINavigationBar*)myNavBar1: (NSString*)input { UIView *test = [[UIView alloc] initWithFrame:[[UIScreen mainScreen] applicationFrame]]; UINavigationBar *navBar = [[UINavigationBar alloc] initWithFrame:CGRectMake(0.0, 0.0, test.bounds.size.width, 45)]; navBar.tintColor = [SiteOneController myColor1]; UINavigationItem *navItem; navItem = [UINavigationItem alloc]; navItem.title = input; [navBar pushNavigationItem:navItem animated:false]; return navBar; } //-------------------------------------------------------------------------------------------// //-------------------------------------------------------------------------------------------// //-------------------------------------------------------------------------------------------// // Implement loadView to create a view hierarchy programmatically, without using a nib. - (void)loadView { //hard coded array of content for each site // CC NSMutableArray *allccContent = [[NSMutableArray alloc] init]; NSString *cc1 = @"House Model"; NSString *cc2 = @"James Dexter History"; [allccContent addObject: cc1]; [cc1 release]; [allccContent addObject: cc2]; [cc2 release]; // FC NSMutableArray *allfcContent = [[NSMutableArray alloc] init]; NSString *fc1 = @"Ghost House"; NSString *fc2 = @"Franklins Letters"; NSString *fc3 = @"Franklins Business"; [allfcContent addObject: fc1]; [fc1 release]; [allfcContent addObject: fc2]; [fc2 release]; [allfcContent addObject: fc3]; [fc3 release]; // PC NSMutableArray *allphContent = [[NSMutableArray alloc] init]; NSString *ph1 = @"Changing Occupancy"; NSString *ph2 = @"Sketches"; NSString *ph3 = @"Servant House"; NSString *ph4 = @"Monument"; NSString *ph5 = @"Virtual Model"; [allphContent addObject: ph1]; [ph1 release]; [allphContent addObject: ph2]; [ph2 release]; [allphContent addObject: ph3]; [ph3 release]; [allphContent addObject: ph4]; [ph4 release]; [allphContent addObject: ph5]; [ph5 release]; // Each content page's view //UIView *ccContent = [[UIView alloc] initWithFrame:[[UIScreen mainScreen] applicationFrame]]; UIView *fcContent = [[UIView alloc] initWithFrame:[[UIScreen mainScreen] applicationFrame]]; UIView *phContent = [[UIView alloc] initWithFrame:[[UIScreen mainScreen] applicationFrame]]; //ccContent.backgroundColor = [UIColor whiteColor]; fcContent.backgroundColor = [UIColor whiteColor]; phContent.backgroundColor = [UIColor whiteColor]; //[ccContent addSubview:[SiteOneController myNavBar1:@"Constitution Center Content"]]; [fcContent addSubview:[SiteOneController myNavBar1:@"Franklin Court Content"]]; [phContent addSubview:[SiteOneController myNavBar1:@"Presidents House Content"]]; //allocate the view self.view = [[UIView alloc] initWithFrame:[[UIScreen mainScreen] applicationFrame]]; //set the view's background color self.view.backgroundColor = [UIColor whiteColor]; [self.view addSubview:[SiteOneController myNavBar1:@"Sites"]]; NSMutableArray *sites = [[NSMutableArray alloc] init]; NSString *one = @"Constution Center"; NSString *two = @"Franklin Court"; NSString *three = @"Presidents House"; [sites addObject: one]; [one release]; [sites addObject: two]; [two release]; [sites addObject: three]; [three release]; NSString *ccName = @"Constitution Center"; NSString *fcName = @"Franklin Court"; NSString *element; int j = 0; for (element in sites) { UIButton *button = [UIButton buttonWithType:UIButtonTypeCustom]; //setframe (where on screen) //separation is 15px past the width (45-30) button.frame = CGRectMake(a, b + (j*45), c, d); [button setTitle:element forState:UIControlStateNormal]; button.backgroundColor = [SiteOneController myColor1]; /*- (void) fooFirstInput:(NSString*) first secondInput:(NSString*) second { NSLog(@"Logs %@ then %@", first, second); } - (void) performMethodsViaSelectors { [self performSelector:@selector(fooNoInputs)]; [self performSelector:@selector(fooOneInput:) withObject:@"first"]; [self performSelector;@selector(fooFirstInput:secondInput:) withObject:@"first" withObject:@"second"];*/ //UIView *old = self.view; if (element == ccName) { [button addTarget:self action:@selector(showCCView) forControlEvents:UIControlEventTouchUpInside]; } else if (element == fcName) { } else { } [self.view addSubview: button]; j++; } } // This method show the content views for each of the sites. /*+ (void) showCCView { self.view = [SiteOneController ccContent]; }*/

    Read the article

  • Nginx and client certificates from hierarchical OpenSSL-based certification authorities

    - by Fmy Oen
    I'm trying to set up root certification authority, subordinate certification authority and to generate the client certificates signed by any of this CA that nginx 0.7.67 on Debian Squeeze will accept. My problem is that root CA signed client certificate works fine while subordinate CA signed one results in "400 Bad Request. The SSL certificate error". Step 1: nginx virtual host configuration: server { server_name test.local; access_log /var/log/nginx/test.access.log; listen 443 default ssl; keepalive_timeout 70; ssl_protocols SSLv3 TLSv1; ssl_ciphers AES128-SHA:AES256-SHA:RC4-SHA:DES-CBC3-SHA:RC4-MD5; ssl_certificate /etc/nginx/ssl/server.crt; ssl_certificate_key /etc/nginx/ssl/server.key; ssl_client_certificate /etc/nginx/ssl/client.pem; ssl_verify_client on; ssl_session_cache shared:SSL:10m; ssl_session_timeout 5m; location / { proxy_pass http://testsite.local/; } } Step 2: PKI infrastructure organization for both root and subordinate CA (based on this article): # mkdir ~/pki && cd ~/pki # mkdir rootCA subCA # cp -v /etc/ssl/openssl.cnf rootCA/ # cd rootCA/ # mkdir certs private crl newcerts; touch serial; echo 01 > serial; touch index.txt; touch crlnumber; echo 01 > crlnumber # cp -Rvp * ../subCA/ Almost no changes was made to rootCA/openssl.cnf: [ CA_default ] dir = . # Where everything is kept ... certificate = $dir/certs/rootca.crt # The CA certificate ... private_key = $dir/private/rootca.key # The private key and to subCA/openssl.cnf: [ CA_default ] dir = . # Where everything is kept ... certificate = $dir/certs/subca.crt # The CA certificate ... private_key = $dir/private/subca.key # The private key Step 3: Self-signed root CA certificate generation: # openssl genrsa -out ./private/rootca.key -des3 2048 # openssl req -x509 -new -key ./private/rootca.key -out certs/rootca.crt -config openssl.cnf Enter pass phrase for ./private/rootca.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:rootca Email Address []: Step 4: Subordinate CA certificate generation: # cd ../subCA # openssl genrsa -out ./private/subca.key -des3 2048 # openssl req -new -key ./private/subca.key -out subca.csr -config openssl.cnf Enter pass phrase for ./private/subca.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:subca Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: Step 5: Subordinate CA certificate signing by root CA certificate: # cd ../rootCA/ # openssl ca -in ../subCA/subca.csr -extensions v3_ca -config openssl.cnf Using configuration from openssl.cnf Enter pass phrase for ./private/rootca.key: Check that the request matches the signature Signature ok Certificate Details: Serial Number: 1 (0x1) Validity Not Before: Feb 4 10:49:43 2013 GMT Not After : Feb 4 10:49:43 2014 GMT Subject: countryName = AU stateOrProvinceName = Some-State organizationName = Internet Widgits Pty Ltd commonName = subca X509v3 extensions: X509v3 Subject Key Identifier: C9:E2:AC:31:53:81:86:3F:CD:F8:3D:47:10:FC:E5:8E:C2:DA:A9:20 X509v3 Authority Key Identifier: keyid:E9:50:E6:BF:57:03:EA:6E:8F:21:23:86:BB:44:3D:9F:8F:4A:8B:F2 DirName:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca serial:9F:FB:56:66:8D:D3:8F:11 X509v3 Basic Constraints: CA:TRUE Certificate is to be certified until Feb 4 10:49:43 2014 GMT (365 days) Sign the certificate? [y/n]:y 1 out of 1 certificate requests certified, commit? [y/n]y ... # cd ../subCA/ # cp -v ../rootCA/newcerts/01.pem certs/subca.crt Step 6: Server certificate generation and signing by root CA (for nginx virtual host): # cd ../rootCA # openssl genrsa -out ./private/server.key -des3 2048 # openssl req -new -key ./private/server.key -out server.csr -config openssl.cnf Enter pass phrase for ./private/server.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:test.local Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in server.csr -out certs/server.crt -config openssl.cnf Step 7: Client #1 certificate generation and signing by root CA: # openssl genrsa -out ./private/client1.key -des3 2048 # openssl req -new -key ./private/client1.key -out client1.csr -config openssl.cnf Enter pass phrase for ./private/client1.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:Client #1 Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in client1.csr -out certs/client1.crt -config openssl.cnf Step 8: Client #1 certificate converting to PKCS12 format: # openssl pkcs12 -export -out certs/client1.p12 -inkey private/client1.key -in certs/client1.crt -certfile certs/rootca.crt Step 9: Client #2 certificate generation and signing by subordinate CA: # cd ../subCA/ # openssl genrsa -out ./private/client2.key -des3 2048 # openssl req -new -key ./private/client2.key -out client2.csr -config openssl.cnf Enter pass phrase for ./private/client2.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:Client #2 Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in client2.csr -out certs/client2.crt -config openssl.cnf Step 10: Client #2 certificate converting to PKCS12 format: # openssl pkcs12 -export -out certs/client2.p12 -inkey private/client2.key -in certs/client2.crt -certfile certs/subca.crt Step 11: Passing server certificate and private key to nginx (performed with OS superuser privileges): # cd ../rootCA/ # cp -v certs/server.crt /etc/nginx/ssl/ # cp -v private/server.key /etc/nginx/ssl/ Step 12: Passing root and subordinate CA certificates to nginx (performed with OS superuser privileges): # cat certs/rootca.crt > /etc/nginx/ssl/client.pem # cat ../subCA/certs/subca.crt >> /etc/nginx/ssl/client.pem client.pem file look like this: # cat /etc/nginx/ssl/client.pem -----BEGIN CERTIFICATE----- MIID6TCCAtGgAwIBAgIJAJ/7VmaN048RMA0GCSqGSIb3DQEBBQUAMFYxCzAJBgNV BAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBX aWRnaXRzIFB0eSBMdGQxDzANBgNVBAMTBnJvb3RjYTAeFw0xMzAyMDQxMDM1NTda ... -----END CERTIFICATE----- Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) ... -----BEGIN CERTIFICATE----- MIID4DCCAsigAwIBAgIBATANBgkqhkiG9w0BAQUFADBWMQswCQYDVQQGEwJBVTET MBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50ZXJuZXQgV2lkZ2l0cyBQ dHkgTHRkMQ8wDQYDVQQDEwZyb290Y2EwHhcNMTMwMjA0MTA0OTQzWhcNMTQwMjA0 ... -----END CERTIFICATE----- It looks like everything is working fine: # service nginx reload # Reloading nginx configuration: Enter PEM pass phrase: # nginx. # Step 13: Installing *.p12 certificates in browser (Firefox in my case) gives the problem I've mentioned above. Client #1 = 200 OK, Client #2 = 400 Bad request/The SSL certificate error. Any ideas what should I do? Update 1: Results of SSL connection test attempts: # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/rootca.crt -cert ~/pki/rootCA/certs/client1.crt -key ~/pki/rootCA/private/client1.key -showcerts Enter pass phrase for tmp/testcert/client1.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 --- Certificate chain 0 s:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=test.local i:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca -----BEGIN CERTIFICATE----- MIIDpjCCAo6gAwIBAgIBAjANBgkqhkiG9w0BAQUFADBWMQswCQYDVQQGEwJBVTET MBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50ZXJuZXQgV2lkZ2l0cyBQ dHkgTHRkMQ8wDQYDVQQDEwZyb290Y2EwHhcNMTMwMjA0MTEwNjAzWhcNMTQwMjA0 ... -----END CERTIFICATE----- 1 s:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca i:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca -----BEGIN CERTIFICATE----- MIID6TCCAtGgAwIBAgIJAJ/7VmaN048RMA0GCSqGSIb3DQEBBQUAMFYxCzAJBgNV BAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBX aWRnaXRzIFB0eSBMdGQxDzANBgNVBAMTBnJvb3RjYTAeFw0xMzAyMDQxMDM1NTda ... -----END CERTIFICATE----- --- Server certificate subject=/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=test.local issuer=/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca --- Acceptable client certificate CA names /C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca /C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca --- SSL handshake has read 3395 bytes and written 2779 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: zlib compression Expansion: zlib compression SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: 15BFC2029691262542FAE95A48078305E76EEE7D586400F8C4F7C516B0F9D967 Session-ID-ctx: Master-Key: 23246CF166E8F3900793F0A2561879E5DB07291F32E99591BA1CF53E6229491FEAE6858BFC9AACAF271D9C3706F139C7 Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None TLS session ticket: 0000 - c2 5e 1d d2 b5 6d 40 23-b2 40 89 e4 35 75 70 07 .^...m@#[email protected]. 0010 - 1b bb 2b e6 e0 b5 ab 10-10 bf 46 6e aa 67 7f 58 ..+.......Fn.g.X 0020 - cf 0e 65 a4 67 5a 15 ba-aa 93 4e dd 3d 6e 73 4c ..e.gZ....N.=nsL 0030 - c5 56 f6 06 24 0f 48 e6-38 36 de f1 b5 31 c5 86 .V..$.H.86...1.. ... 0440 - 4c 53 39 e3 92 84 d2 d0-e5 e2 f5 8a 6a a8 86 b1 LS9.........j... Compression: 1 (zlib compression) Start Time: 1359989684 Timeout : 300 (sec) Verify return code: 0 (ok) --- Everything seems fine with Client #2 and root CA certificate but request returns 400 Bad Request error: # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/rootca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 ... Compression: 1 (zlib compression) Start Time: 1359989989 Timeout : 300 (sec) Verify return code: 0 (ok) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request Server: nginx/0.7.67 Date: Mon, 04 Feb 2013 15:00:43 GMT Content-Type: text/html Content-Length: 231 Connection: close <html> <head><title>400 The SSL certificate error</title></head> <body bgcolor="white"> <center><h1>400 Bad Request</h1></center> <center>The SSL certificate error</center> <hr><center>nginx/0.7.67</center> </body> </html> closed Verification fails with Client #2 certificate and subordinate CA certificate: # openssl s_client -connect test.local:443 -CAfile ~/pki/subCA/certs/subca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify error:num=19:self signed certificate in certificate chain verify return:0 ... Compression: 1 (zlib compression) Start Time: 1359990354 Timeout : 300 (sec) Verify return code: 19 (self signed certificate in certificate chain) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request ... Still getting 400 Bad Request error with concatenated CA certificates and Client #2 (but still everything ok with Client #1): # cat certs/rootca.crt ../subCA/certs/subca.crt > certs/concatenatedca.crt # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/concatenatedca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 --- ... Compression: 1 (zlib compression) Start Time: 1359990772 Timeout : 300 (sec) Verify return code: 0 (ok) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request ... Update 2: I've managed to recompile nginx with enabled debug. Here is the part of successfull conection by Client #1 track: 2013/02/05 14:08:23 [debug] 38701#0: *119 accept: <MY IP ADDRESS> fd:3 2013/02/05 14:08:23 [debug] 38701#0: *119 event timer add: 3: 60000:2856497512 2013/02/05 14:08:23 [debug] 38701#0: *119 kevent set event: 3: ft:-1 fl:0025 2013/02/05 14:08:23 [debug] 38701#0: *119 malloc: 28805200:660 2013/02/05 14:08:23 [debug] 38701#0: *119 malloc: 28834400:1024 2013/02/05 14:08:23 [debug] 38701#0: *119 posix_memalign: 28860000:4096 @16 2013/02/05 14:08:23 [debug] 38701#0: *119 http check ssl handshake 2013/02/05 14:08:23 [debug] 38701#0: *119 https ssl handshake: 0x16 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL server name: "test.local" 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_do_handshake: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL handshake handler: 0 2013/02/05 14:08:23 [debug] 38701#0: *119 verify:1, error:0, depth:1, subject:"/C=AU /ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 14:08:23 [debug] 38701#0: *119 verify:1, error:0, depth:0, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=Client #1",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_do_handshake: 1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL: TLSv1, cipher: "AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1" 2013/02/05 14:08:23 [debug] 38701#0: *119 http process request line 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 http process request line 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: 1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: 524 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 http request line: "GET / HTTP/1.1" And here is the part of unsuccessfull conection by Client #2 track: 2013/02/05 13:51:34 [debug] 38701#0: *112 accept: <MY_IP_ADDRESS> fd:3 2013/02/05 13:51:34 [debug] 38701#0: *112 event timer add: 3: 60000:2855488975 2013/02/05 13:51:34 [debug] 38701#0: *112 kevent set event: 3: ft:-1 fl:0025 2013/02/05 13:51:34 [debug] 38701#0: *112 malloc: 28805200:660 2013/02/05 13:51:34 [debug] 38701#0: *112 malloc: 28834400:1024 2013/02/05 13:51:34 [debug] 38701#0: *112 posix_memalign: 28860000:4096 @16 2013/02/05 13:51:34 [debug] 38701#0: *112 http check ssl handshake 2013/02/05 13:51:34 [debug] 38701#0: *112 https ssl handshake: 0x16 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL server name: "test.local" 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL handshake handler: 0 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL handshake handler: 0 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:0, error:20, depth:1, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:0, error:27, depth:1, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:1, error:27, depth:0, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=Client #2",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca" 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: 1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL: TLSv1, cipher: "AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1" 2013/02/05 13:51:34 [debug] 38701#0: *112 http process request line 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: 1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: 524 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 http request line: "GET / HTTP/1.1" So I'm getting OpenSSL error #20 and then #27. According to verify documentation: 20 X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY: unable to get local issuer certificate the issuer certificate could not be found: this occurs if the issuer certificate of an untrusted certificate cannot be found. 27 X509_V_ERR_CERT_UNTRUSTED: certificate not trusted the root CA is not marked as trusted for the specified purpose.

    Read the article

  • Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

    - by Srekel
    I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

    Read the article

  • Weird WLAN connection

    - by tuelsch
    I assembled my first computer on my own. As I realised it had no WLAN (AsRock Z77 Extreme 4m) I bought a WLAN stick (ZyXel NWD 2105), plugged it in, started the setup from the CD and it worked, until I restarted the PC. That's when the problems started. The stick is able to connect to the router (P-660HN-F1Z) and the connection is stable, but not the internet access. In estimately 1 minute intervals there might be a short connection timeframe and dropbox or windows update are able to download some data, but as soon as I try to open a website the internet access is away. Note that the connection to the router does not shut down and remains stable at around 80-90%. The problem is definetly located on my pc, because with my laptop and phone the connection is stable and fast. Because I was so pissed off, I bought a EW-7612PIn V2 (PCI-E WLAN adapter), same problem. Now the weird thing is, if I don't use the PC for about 2 days, start it up, there is internet access (happened with both the stick and the PCI-E card). A bit slow, but it does not get away just like that, until I shut it down. Then, no matter how many times I restart, it won't come back. I googled a lot but now I'm at the end with my latin. Has anyone had a similar problem and resolved it? Technical details: Motherboard: AsRock Z77 Extreme 4M OS: Windows 7 professional 64bit Stick: Zyxel wireless N adapter NWD2105 PCI-E card: Edimax EW-7612PIn V2 Router: ZyXel P-660HN-F1Z Windows-IP-Konfiguration Hostname . . . . . . . . . . . . : xyz Primäres DNS-Suffix . . . . . . . : Knotentyp . . . . . . . . . . . . : Hybrid IP-Routing aktiviert . . . . . . : Nein WINS-Proxy aktiviert . . . . . . : Nein Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 5: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter # 3 Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 4: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Edimax 802.11n Wireless Adapter Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Verbindungslokale IPv6-Adresse . : fe80::38d2:f489:726d:1fb5%17(Bevorzugt) IPv4-Adresse . . . . . . . . . . : 192.168.1.41(Bevorzugt) Subnetzmaske . . . . . . . . . . : 255.255.255.0 Lease erhalten. . . . . . . . . . : Donnerstag, 15. November 2012 10:51:05 Lease läuft ab. . . . . . . . . . : Sonntag, 18. November 2012 10:51:18 Standardgateway . . . . . . . . . : 192.168.1.1 DHCP-Server . . . . . . . . . . . : 192.168.1.1 DHCPv6-IAID . . . . . . . . . . . : 578821890 DHCPv6-Client-DUID. . . . . . . . : 00-01-00-01-17-FF-D5-FE-BC-5F-F4-48-FC-4B DNS-Server . . . . . . . . . . . : 91.233.182.2 194.230.1.39 NetBIOS über TCP/IP . . . . . . . : Aktiviert Tunneladapter isatap.{263BEB98-344B-435C-888F-1B15B97C3AC1}: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja Tunneladapter Teredo Tunneling Pseudo-Interface: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja IPv6-Adresse. . . . . . . . . . . : 2001:0:9d38:6ab8:209c:2944:3f57:fed6(Bevo rzugt) Verbindungslokale IPv6-Adresse . : fe80::209c:2944:3f57:fed6%11(Bevorzugt) Standardgateway . . . . . . . . . : :: NetBIOS über TCP/IP . . . . . . . : Deaktiviert C:\Users\xyz>ping 192.168.1.1 Ping wird ausgeführt für 192.168.1.1 mit 32 Bytes Daten: Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Ping-Statistik für 192.168.1.1: Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0 (0% Verlust), Ca. Zeitangaben in Millisek.: Minimum = 2ms, Maximum = 2ms, Mittelwert = 2ms

    Read the article

  • Zend/PHP: Problem uploading/downloading file to/from MySQL's BLOB field.

    - by NAVEED
    I am uploading file(any type) like this: (It is uploading content of file in blob field of mysql) $organizationModel = new Model_Organization_Object( organizationId ); $myFile = file_get_contents( '../path/to/my/file/filename.ext' ); $organizationModel->setOrganizationProfile( $myFile ); $organizationModel->save(); Now I want to get that file from database and want to download. I doing this in controller's action: (I am aspecting pdf file here therefore it is hardcoded below. But in future I want to download any file from blob field) $organizationModel = new Model_Organization_Object( $organizationId ); $content = $organizationModel->getOrganizationProfile(); header('Content-Type: application/octet-stream'); header("Content-Length: " . strlen($content) ); header('Content-Disposition: attachment; filename=orgProfile.pdf'); $this->view->organizationProfile = $content; Now in view file I am doing this: echo $this-organizationProfile; But above download process print(echo) the content of file in firbug and does not download file in orignal format. My echo output in firebug is like this: %PDF-1.3 %???? 84 0 obj << /Linearized 1 /O 86 /H [ 541 212 ] /L 958398 /E 11238 /N 27 /T 956600 >> endobj xref 84 7 0000000016 00000 n 0000000486 00000 n 0000000753 00000 n 0000000982 00000 n 0000001102 00000 n 0000000541 00000 n 0000000732 00000 n trailer << /Size 91 /Info 83 0 R /Root 85 0 R /Prev 956590 /ID[<0a8d7035bf08791da591e8cae39b8c49><0a8d7035bf08791da591e8cae39b8c49>] >> startxref 0 %%EOF 85 0 obj << /Type /Catalog /Pages 82 0 R >> endobj 89 0 obj << /S 151 /Filter /FlateDecode /Length 90 0 R >> stream H?b```f``?e`b`?f`@\0?.????\\I~aV$?X??dO????bA?Az?lv1o#?{-????1+??G?????N`?b? >?-?? \0\0D40 endstream endobj 90 0 obj 106 endobj 86 0 obj << /Type /Page /Contents 87 0 R /Parent 79 0 R /Resources << /XObject << /img0 88 0 R >> /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] >> /MediaBox [ 0 0 612 792 ] /CropBox [ 0 0 612 792 ] /Rotate 0 >> endobj 87 0 obj << /Filter /FlateDecode /Length 46 >> stream x?+T05???P0\0Bs#SC=S3c3??\\???t?|?@.\0??? endstream endobj 88 0 obj << /Filter /FlateDecode /Type /XObject /Length 8926 /BitsPerComponent 8 /Height 1122 /ColorSpace [ /Indexed /DeviceRGB 255 (\0\0\0JJJkkk{{{????????????????????????????????????\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0) ] /Subtype /Image /Width 793 >> stream x???v??\0?bF???mf?\\3??k?~? ?7uj??\\\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0~??/\0~??/\0~?&|??tp?pKS ????Fc???!?Q~?72?&???>???]?$?KUo????9?Tx??E8U}?????? _#=??6 Q{????v?T|s?>\\??w??.|??8?7Q????o.?o????????G??x??|?Is:??????oN>4???jJ?F?v? ? V?q<???P?????I>?.|?iT? ???Ç?Q?m????G?8c`????a`<?.|??~`????OG!?x7j??K*]??S?1??_??1\'?D?????0??\"?w\\?e?????<F:4????E-??Fa????O?v????9??_ m???P??8iuTr?i?FX?????<C? ????t:?(0??I>?2`????.???:??pv:???A??<$M??????e9??\\c???.0???t?kum?K;??<???\\@?]f/?h??m_???g???l?8&??*??2?-??Ew?4[j?v?(?????p?T???M--?8 cb??]?h??pN???kt?J$?m???X???5Cr?]?Jm?VP?X?Ð!? ?$???-?PM??O]??,?h???r=???qV}?p*?c?uq??t??????R6v??l8?I?e?9 {s\\K _?CN?^??W?8%p\']?2U?D{???Z?EB?*?d?va1^??Z\"?7?t]?TL?^??d???.|?4?q?2?&2??S{(??G?vNi4?D?K?)_^?]???D]DK???j?9????OQ?]???us?n?T4?om?P??E?|?t??w?????c?7>!]?\"}$??:??<????[9?C??Wi?u?su#9?\0?t?u=??=w??Q??A??.?dyb vN?N\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0??U/????<??v????S?A\\??qkm? !???&??J????!,??+?w;????{?!D???K×%5?E???????|n?FT*,? ?? ?j#Q??uT~r:}\\?_?????v???8Q?&? ???T?S?I\"?(>Y??????}H??aj?3??u?h?T?X?Z?-~??c\'P?^??d?????????]_???z??O]?q?????7??|?mN%??????T?????o???sUzT???m?v8?q? ??e]?wS???C~Ta???.??[%!??????2x]n~?7??????6.????K??;c }????r?)V?? u???*?7?$c\\???m?~???r??)U{?????????R?? ??D1L_????WUog?>??/?????????~?%???M???}\'?? ;???y??K`?????O?,??????<?,0???;3 #??m?v???aZ=?N?u?J`??dwnm;??.??k?n?K1-M?7????H&??????s?C??? ?}Z?1????c?(0?q?_1??7?%???G7U/??h9I??????S?Q??4nc?Lq??H6??;??c(/O??2???-?*_????%?I?/??I?o????ô?k??<????q??\'??]v?\"??+????,????qxgk?\\\\?6???7??Y???.G???Y??8??.??*???M_??J?hu1????z??W?o_??F?/???s?:?Y~??>0?g\\E?l?K5e???&L?/????k$????{?:\\>??Fs?-??l?>c??o?????9?V+?2;??}q?4 ?zS?|u?A`dK???n~?s???K?hiY?j??#p???S?M\\???0P2?\\*?m+?L5Er????[W?>9|???i?????}`Nmc:Qv??]&|?_????fx???????Ns~w??to????K?M???uN????0J6q1??u(b?M?_?????7?]?m?\':????S@???4?????\\??@~Mn?????|}?9?F6_Vr ??7??{?_??_????Y?Go?9??f1????E?|?Ucd? ????????t7k?? }??:??n?M?_????#?M$DG???:Z??y??;g:?|????F?m??e?F*?uJ?C??-?v?%??^?*??????z:l???w?e???9??i?5j???x?~??Ao???a?x?{?UL??? ??#:???\'^?????W??f;?u???ejq¯?u[?2K8??e?>/?ug?@S??L???? ??u0uI~?z?YYV???[[O?T??-Y?u?j?M?_???n&??7O?f??s??z`.`?,W??#?l??n???s??\'?????=??&#?z?M7_????s???x??y? ??u?p?G???0?e?G????8]{??N?1}??}~Q?[)?XF??_??*? p7iQ????M?(?l????????????f??6????*??U;@~\\k?i??w_??*?#???^?j?\\?L??/?}?Y?[??V??t~?w?n??a???m?O?(.?n;??ji:??W?ZnQ[9?n=?^??sE9??;?.??u3\"???<?L??y8?<H???g??u??\\?q???71p?U??}???f`?Y??m3b*C?t{?SX??7m<??6??8K??[Qs??&_??(M??:?Z???W?????W? ??4d??4?A????lw?e?d?>? ?pCV??h?SS?Z?T??4?N?,?? ?8=-?%???4?p?a??~??R?L??=J??j}??"??,?(?x?????????o?ï??t??X7???~jQ?aK???Z*YL????X??/?m?ot?9&s0???O5??j=?7sb?l?Mh???y?}Q\\4?MM?i5&?Yf??hS??N????\'?\0?????i?9??G?$??R?A1[??Y?t??4b?}????u??3?Y??Il????{??[u??f??q???Z_;??|*?t?uTO??}b?a?0>????>?>w\'P?E??]????6???v?^?,?;?uE?f?;?> yo?eNS@?C???I??????Otf????4I??? ?s????*??G?\'?>?</?=T?CE??5NR?~??%?1?d^V??O??????????e||/b??^ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0~????+?W8??t????????}????????X?????7??/???\\}LM?????b?#?q];J??[U???(0N??t?????[??_V?!??%????-?7:?m???9??Dau?o]??^????*??,???h?o3f??[%?FW?W!?X#; ?>HC?-?\'/??^??\'?*?)??!?_?e?+TC?7O??I.?[?tN?,??Rs???u???^???????q??S??.?c?UR?????? ????M????FS???A????>?^K?|[?]z~7??7u???7V]L?|??l???]?[e?+u?????{U}???Em??IWbV7????/v?x?zk??F@.??5?G?Í>f??_???Gg?}??tc??&R???n???G-?N]/?w?? ????f?}Ue%?;?~?:????`6(??_???g???`? E~?p06?}#/?G=????;??<$Y???l??m?T??@Y??p?????r??.?H?>\0.Ih??~???!?N/^o? ??&v??R???9?suJ?r???JZg?z?Y?7??^?J??H>{[?vQ????qw?e{{?l????????u]?.Z?xh%7??>?|???b`?K?|I\"?nh?m?????m?z5Qpw??N3???y?)??k??????,?Ws*SJ]????????!?o?Iq3~x??Az{?v]\'?k????k???Dc ?]??l?)L??? I8eG#r?dC??;??/C???l???rm???????e?6?M??fP?4?r??)?!?\\s???{??!cN??h??>?? ??o>??m?dO=&<??P??]=]???n?v??y?l??\"?K??????rF?I???)Z??]n?J??N?w???S/S??w???R6}\'u??kN?K`?C/???N??,??o??I?>?S?(??hOV????-]?p?r??0??u?(?,a????/???\"o;???44????P?9K!O]??x?r?}??8?????w?4?|?el7U??l.}|w?- ?=?Lq??e<&??g?/z8??7??:n?????ï??~??_?a???&?7sy???,?3?1??rV???m?????s??C?x50?????g???\\??!??????e?????/Cl?Y???:??jz3??????/?a?]}??\\n???BZ?0?J-+u??????x?=??CC??M??W[??v<???S14?????\\C?Z ??g???q:?u?C?k?vc?K?;??\"Y?t?r]??G?z????w???r??????0??????e?:??/f?*^?W?Q8WsN??9}*?|??~x)?N?=6J?l????M?b??????M45?C?k]??r?u??????r ] Can someone help that how to download file or I am doing something wrong with uploading process. setOrganizationProfile() and getOrganizationProfile() function are created by me which are working fine while storing/getting data to/from database. Thanks

    Read the article

  • java inserting special characters with preparedstatement fails

    - by phill
    I am using an HTML form which sends <input type=hidden name=longdesc value='SMARTNET%^" 8X5XNBD'> this is done by the following javascript code: function masinsert(id) { var currentTime=new Date(); var button = document.getElementById("m"+id); button.onclick=""; button.value="Inserting"; var itemdescription = document.getElementById("itemdescription"+id).value; function handleHttpResponse() { if (http.readyState == 4) { button.value="Item Added"; } } var http = getHTTPObject(); // We create the HTTP Object var tempUrl = "\AInsert"; tempUrl += "itemdescription="+itemdescription+"&"+"itemshortdescription="+itemdescription.substring(0,37)+; alert(tempUrl); http.open("GET", tempUrl, true); http.onreadystatechange = handleHttpResponse; http.send(null); } to a java servlet. AInsert.java in the AInsert.java file, I do a String itemdescription = request.getParameter("longdesc"); which then sends the value to a preparedstatement to run an insert query. In the query, there are sometimes special characters which throw it off. For example, when I run the following insert into itemdescription (longdesc) values ('SMARTNET%^" 8X5XNBD') here is the actual snippet: PreparedStatement ps = conn.prepareStatement("INSERT INTO itemdescription (longdesc) values(?)"); ps.setString(1, itemdescription); ps.executeUpdate(); It will produce an error saying : Cannot insert the value NULL into column 'LongDesc', table 'App.dbo.itemdescription'; column does not allow nulls. Insert fails I have tried urlencode/urldecode String encodedString = URLEncoder.encode(longdesc, "UTF-8"); String decitemdescription = URLDecoder.decode(itemdescription, "UTF-8"); and i've also tried these functions //BEGIN URL Encoder final static String[] hex = { "%00", "%01", "%02", "%03", "%04", "%05", "%06", "%07", "%08", "%09", "%0a", "%0b", "%0c", "%0d", "%0e", "%0f", "%10", "%11", "%12", "%13", "%14", "%15", "%16", "%17", "%18", "%19", "%1a", "%1b", "%1c", "%1d", "%1e", "%1f", "%20", "%21", "%22", "%23", "%24", "%25", "%26", "%27", "%28", "%29", "%2a", "%2b", "%2c", "%2d", "%2e", "%2f", "%30", "%31", "%32", "%33", "%34", "%35", "%36", "%37", "%38", "%39", "%3a", "%3b", "%3c", "%3d", "%3e", "%3f", "%40", "%41", "%42", "%43", "%44", "%45", "%46", "%47", "%48", "%49", "%4a", "%4b", "%4c", "%4d", "%4e", "%4f", "%50", "%51", "%52", "%53", "%54", "%55", "%56", "%57", "%58", "%59", "%5a", "%5b", "%5c", "%5d", "%5e", "%5f", "%60", "%61", "%62", "%63", "%64", "%65", "%66", "%67", "%68", "%69", "%6a", "%6b", "%6c", "%6d", "%6e", "%6f", "%70", "%71", "%72", "%73", "%74", "%75", "%76", "%77", "%78", "%79", "%7a", "%7b", "%7c", "%7d", "%7e", "%7f", "%80", "%81", "%82", "%83", "%84", "%85", "%86", "%87", "%88", "%89", "%8a", "%8b", "%8c", "%8d", "%8e", "%8f", "%90", "%91", "%92", "%93", "%94", "%95", "%96", "%97", "%98", "%99", "%9a", "%9b", "%9c", "%9d", "%9e", "%9f", "%a0", "%a1", "%a2", "%a3", "%a4", "%a5", "%a6", "%a7", "%a8", "%a9", "%aa", "%ab", "%ac", "%ad", "%ae", "%af", "%b0", "%b1", "%b2", "%b3", "%b4", "%b5", "%b6", "%b7", "%b8", "%b9", "%ba", "%bb", "%bc", "%bd", "%be", "%bf", "%c0", "%c1", "%c2", "%c3", "%c4", "%c5", "%c6", "%c7", "%c8", "%c9", "%ca", "%cb", "%cc", "%cd", "%ce", "%cf", "%d0", "%d1", "%d2", "%d3", "%d4", "%d5", "%d6", "%d7", "%d8", "%d9", "%da", "%db", "%dc", "%dd", "%de", "%df", "%e0", "%e1", "%e2", "%e3", "%e4", "%e5", "%e6", "%e7", "%e8", "%e9", "%ea", "%eb", "%ec", "%ed", "%ee", "%ef", "%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7", "%f8", "%f9", "%fa", "%fb", "%fc", "%fd", "%fe", "%ff" }; /** * Encode a string to the "x-www-form-urlencoded" form, enhanced * with the UTF-8-in-URL proposal. This is what happens: * * <ul> * <li><p>The ASCII characters 'a' through 'z', 'A' through 'Z', * and '0' through '9' remain the same. * * <li><p>The unreserved characters - _ . ! ~ * ' ( ) remain the same. * * <li><p>The space character ' ' is converted into a plus sign '+'. * * <li><p>All other ASCII characters are converted into the * 3-character string "%xy", where xy is * the two-digit hexadecimal representation of the character * code * * <li><p>All non-ASCII characters are encoded in two steps: first * to a sequence of 2 or 3 bytes, using the UTF-8 algorithm; * secondly each of these bytes is encoded as "%xx". * </ul> * * @param s The string to be encoded * @return The encoded string */ public static String encode(String s) { StringBuffer sbuf = new StringBuffer(); int len = s.length(); for (int i = 0; i < len; i++) { int ch = s.charAt(i); if ('A' <= ch && ch <= 'Z') { // 'A'..'Z' sbuf.append((char)ch); } else if ('a' <= ch && ch <= 'z') { // 'a'..'z' sbuf.append((char)ch); } else if ('0' <= ch && ch <= '9') { // '0'..'9' sbuf.append((char)ch); } else if (ch == ' ') { // space sbuf.append('+'); } else if (ch == '-' || ch == '_' // unreserved || ch == '.' || ch == '!' || ch == '~' || ch == '*' || ch == '\'' || ch == '(' || ch == ')') { sbuf.append((char)ch); } else if (ch <= 0x007f) { // other ASCII sbuf.append(hex[ch]); } else if (ch <= 0x07FF) { // non-ASCII <= 0x7FF sbuf.append(hex[0xc0 | (ch >> 6)]); sbuf.append(hex[0x80 | (ch & 0x3F)]); } else { // 0x7FF < ch <= 0xFFFF sbuf.append(hex[0xe0 | (ch >> 12)]); sbuf.append(hex[0x80 | ((ch >> 6) & 0x3F)]); sbuf.append(hex[0x80 | (ch & 0x3F)]); } } return sbuf.toString(); } //end encode and //decode url private static String unescape(String s) { StringBuffer sbuf = new StringBuffer () ; int l = s.length() ; int ch = -1 ; int b, sumb = 0; for (int i = 0, more = -1 ; i < l ; i++) { /* Get next byte b from URL segment s */ switch (ch = s.charAt(i)) { case '%': ch = s.charAt (++i) ; int hb = (Character.isDigit ((char) ch) ? ch - '0' : 10+Character.toLowerCase((char) ch) - 'a') & 0xF ; ch = s.charAt (++i) ; int lb = (Character.isDigit ((char) ch) ? ch - '0' : 10+Character.toLowerCase ((char) ch)-'a') & 0xF ; b = (hb << 4) | lb ; break ; case '+': b = ' ' ; break ; default: b = ch ; } /* Decode byte b as UTF-8, sumb collects incomplete chars */ if ((b & 0xc0) == 0x80) { // 10xxxxxx (continuation byte) sumb = (sumb << 6) | (b & 0x3f) ; // Add 6 bits to sumb if (--more == 0) sbuf.append((char) sumb) ; // Add char to sbuf } else if ((b & 0x80) == 0x00) { // 0xxxxxxx (yields 7 bits) sbuf.append((char) b) ; // Store in sbuf } else if ((b & 0xe0) == 0xc0) { // 110xxxxx (yields 5 bits) sumb = b & 0x1f; more = 1; // Expect 1 more byte } else if ((b & 0xf0) == 0xe0) { // 1110xxxx (yields 4 bits) sumb = b & 0x0f; more = 2; // Expect 2 more bytes } else if ((b & 0xf8) == 0xf0) { // 11110xxx (yields 3 bits) sumb = b & 0x07; more = 3; // Expect 3 more bytes } else if ((b & 0xfc) == 0xf8) { // 111110xx (yields 2 bits) sumb = b & 0x03; more = 4; // Expect 4 more bytes } else /*if ((b & 0xfe) == 0xfc)*/ { // 1111110x (yields 1 bit) sumb = b & 0x01; more = 5; // Expect 5 more bytes } /* We don't test if the UTF-8 encoding is well-formed */ } return sbuf.toString() ; } but the decoding doesn't change it back to the original special characters. Any ideas? thanks in advance UPDATE: I tried adding these two statements to grab the request String itemdescription = URLDecoder.decode(request.getParameter("itemdescription"), "UTF-8"); String itemshortdescription = URLDecoder.decode(request.getParameter("itemshortdescription"), "UTF-8"); System.out.println("processRequest | short descrip "); and this is failing as well if that helps. UPDATE2: I created an html form and did a direct insert with the encoded itemdescription such as and the insertion works correctly with the special charaters and everything. I guess there is something going on with my javascript submit. Any ideas on this?

    Read the article

  • error while installing the libmemcached

    - by Ahmet vardar
    I get this while installing libmemcached root@server [/libmemcached]# make make all-am make[1]: Entering directory `/libmemcached' if /bin/sh ./libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -ggdb -DBUILDING_HASHKIT -MT libhashkit/libhashkit_libhashkit_la-aes.lo -MD -MP -MF "libhashkit/.deps/libhashkit_libhashkit_la-aes.Tpo" -c -o libhashkit/libhashkit_libhashkit_la-aes.lo `test -f 'libhashkit/aes.cc' || echo './'`libhashkit/aes.cc; \ then mv -f "libhashkit/.deps/libhashkit_libhashkit_la-aes.Tpo" "libhashkit/.deps/libhashkit_libhashkit_la-aes.Plo"; else rm -f "libhashkit/.deps/libhashkit_libhashkit_la-aes.Tpo"; exit 1; fi ./libtool: line 866: X--tag=CXX: command not found ./libtool: line 899: libtool: ignoring unknown tag : command not found ./libtool: line 866: X--mode=compile: command not found ./libtool: line 1032: *** Warning: inferring the mode of operation is deprecated.: command not found ./libtool: line 1033: *** Future versions of Libtool will require --mode=MODE be specified.: command not found ./libtool: line 1176: Xg++: command not found ./libtool: line 1176: X-DHAVE_CONFIG_H: command not found ./libtool: line 1176: X-I.: command not found ./libtool: line 1176: X-I.: command not found ./libtool: line 1176: X-I.: command not found ./libtool: line 1176: X-I.: command not found ./libtool: line 1176: X-I.: command not found ./libtool: line 1176: X-ggdb: command not found ./libtool: line 1176: X-DBUILDING_HASHKIT: command not found ./libtool: line 1176: X-MT: command not found ./libtool: line 1176: Xlibhashkit/libhashkit_libhashkit_la-aes.lo: No such file or directory ./libtool: line 1176: X-MD: command not found ./libtool: line 1176: X-MP: command not found ./libtool: line 1176: X-MF: command not found ./libtool: line 1176: Xlibhashkit/.deps/libhashkit_libhashkit_la-aes.Tpo: No such file or directory ./libtool: line 1176: X-c: command not found ./libtool: line 1228: Xlibhashkit/libhashkit_libhashkit_la-aes.lo: No such file or directory ./libtool: line 1233: libtool: compile: cannot determine name of library object from `': command not found make[1]: *** [libhashkit/libhashkit_libhashkit_la-aes.lo] Error 1 make[1]: Leaving directory `/libmemcached' make: *** [all] Error 2 OUTPUT OF ./configure checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for isainfo... no checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking dependency style of g++... (cached) gcc3 checking whether gcc and cc understand -c and -o together... yes checking how to create a ustar tar archive... gnutar checking whether __SUNPRO_C is declared... no checking whether __ICC is declared... no checking "C Compiler version--yes"... "gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52)" checking "C++ Compiler version"... "g++ (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52)" checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for size_t... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for library containing clock_gettime... -lrt checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking size of off_t... 8 checking size of size_t... 8 checking size of long long... 8 checking if time_t is unsigned... no checking for setsockopt... yes checking for bind... yes checking whether the compiler provides atomic builtins... yes checking assert.h usability... yes checking assert.h presence... yes checking for assert.h... yes checking whether to enable assertions... yes checking whether it is safe to use -fdiagnostics-show-option... yes checking whether it is safe to use -floop-parallelize-all... no checking whether it is safe to use -Wextra... yes checking whether it is safe to use -Wformat... yes checking whether it is safe to use -Wconversion... no checking whether it is safe to use -Wmissing-declarations from C++... no checking whether it is safe to use -Wframe-larger-than... no checking whether it is safe to use -Wlogical-op... no checking whether it is safe to use -Wredundant-decls from C++... yes checking whether it is safe to use -Wattributes from C++... no checking whether it is safe to use -Wno-attributes... no checking for perl... perl checking for dpkg-gensymbols... no checking for lcov... no checking for genhtml... no checking for sphinx-build... no checking for working -pipe... yes checking for bison... bison checking for flex... flex checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 98304 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether the -Werror option is usable... yes checking for simple visibility declarations... yes checking for ISO C++ 98 include files... checking whether memcached executable path has been provided... no checking for memcached... /usr/local/bin/memcached checking whether memcached_sasl executable path has been provided... no checking for memcached_sasl... no checking whether gearmand executable path has been provided... no checking for gearmand... no checking libgearman/gearmand.h usability... no checking libgearman/gearmand.h presence... no checking for libgearman/gearmand.h... no checking for library containing getopt_long... none required checking for library containing gethostbyname... none required checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking the location of cstdint... configure: WARNING: Could not find a cstdint header. <stdint.h> checking the location of cinttypes... configure: WARNING: Could not find a cinttypes header. <inttypes.h> checking whether byte ordering is bigendian... no checking for htonll... no checking for working SO_SNDTIMEO... yes checking for working SO_RCVTIMEO... yes checking for supported struct padding... yes checking for alarm... yes checking for dup2... yes checking for getline... yes checking for gettimeofday... yes checking for memchr... yes checking for memmove... yes checking for memset... yes checking for pipe2... no checking for select... yes checking for setenv... yes checking for socket... yes checking for sqrt... yes checking for strcasecmp... yes checking for strchr... yes checking for strdup... yes checking for strerror... yes checking for strtol... yes checking for strtoul... yes checking for strtoull... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking cxxabi.h usability... yes checking cxxabi.h presence... yes checking for cxxabi.h... yes checking sys/sysctl.h usability... yes checking sys/sysctl.h presence... yes checking for sys/sysctl.h... yes checking umem.h usability... no checking umem.h presence... no checking for umem.h... no checking for C++ compiler vendor... gnu checking for working alloca.h... yes checking for alloca... yes checking for error_at_line... yes checking for pid_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking whether strerror_r is declared... yes checking for strerror_r... yes checking whether strerror_r returns char *... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... no checking for int16_t... yes checking for int32_t... yes checking for int64_t... yes checking for int8_t... yes checking for off_t... yes checking for pid_t... (cached) yes checking for ssize_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for uint8_t... yes checking whether byte ordering is bigendian... (cached) no checking for an ANSI C-conforming const... yes checking for inline... inline checking for working volatile... yes checking for C/C++ restrict keyword... __restrict checking whether the compiler supports GCC C++ ABI name demangling... yes checking sasl/sasl.h usability... no checking sasl/sasl.h presence... no checking for sasl/sasl.h... no checking uuid/uuid.h usability... yes checking uuid/uuid.h presence... yes checking for uuid/uuid.h... yes checking for main in -luuid... yes checking for clock_gettime in -lrt... yes checking for floor in -lm... yes checking for sigignore... yes checking atomic.h usability... no checking atomic.h presence... no checking for atomic.h... no checking for setppriv... no checking for winsock2.h... no checking for poll.h... yes checking for sys/wait.h... yes checking for fnmatch.h... yes checking for MSG_NOSIGNAL... yes checking for MSG_DONTWAIT... yes checking for MSG_MORE... yes checking event.h usability... yes checking event.h presence... yes checking for event.h... yes checking for main in -levent... yes checking for endianness... little configure: creating ./config.status config.status: creating Makefile config.status: creating docs/conf.py config.status: creating libhashkit-1.0/configure.h config.status: creating libmemcached-1.0/configure.h config.status: creating libmemcached-1.2/configure.h config.status: creating libmemcached-2.0/configure.h config.status: creating support/libmemcached.pc config.status: creating support/libmemcached.spec config.status: creating support/libmemcached-fc.spec config.status: creating libtest/version.h config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands --- Configuration summary for libmemcached version 1.0.6 * Installation prefix: /usr/local * System type: unknown-linux-gnu * Host CPU: x86_64 * C Compiler: gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52) * Assertions enabled: yes * Debug enabled: no * Warnings as failure: no * SASL support: --- anyone knows how to solve this ?

    Read the article

  • Can ping device from one computer and not the other

    - by Sean Duggan
    I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

    Read the article

  • Scripting with the Sun ZFS Storage 7000 Appliance

    - by Geoff Ongley
    The Sun ZFS Storage 7000 appliance has a user friendly and easy to understand graphical web based interface we call the "BUI" or "Browser User Interface".This interface is very useful for many tasks, but in some cases a script (or workflow) may be more appropriate, such as:Repetitive tasksTasks which work on (or obtain information about) a large number of shares or usersTasks which are triggered by an alert threshold (workflows)Tasks where you want a only very basic input, but a consistent output (workflows)The appliance scripting language is based on ECMAscript 3 (close to javascript). I'm not going to cover ECMAscript 3 in great depth (I'm far from an expert here), but I would like to show you some neat things you can do with the appliance, to get you started based on what I have found from my own playing around.I'm making the assumption you have some sort of programming background, and understand variables, arrays, functions to some extent - but of course if something is not clear, please let me know so I can fix it up or clarify it.Variable Declarations and ArraysVariablesECMAScript is a dynamically and weakly typed language. If you don't know what that means, google is your friend - but at a high level it means we can just declare variables with no specific type and on the fly.For example, I can declare a variable and use it straight away in the middle of my code, for example:projects=list();Which makes projects an array of values that are returned from the list(); function (which is usable in most contexts). With this kind of variable, I can do things like:projects.length (this property on array tells you how many objects are in it, good for for loops etc). Alternatively, I could say:projects=3;and now projects is just a simple number.Should we declare variables like this so loosely? In my opinion, the answer is no - I feel it is a better practice to declare variables you are going to use, before you use them - and given them an initial value. You can do so as follows:var myVariable=0;To demonstrate the ability to just randomly assign and change the type of variables, you can create a simple script at the cli as follows (bold for input):fishy10:> script("." to run)> run("cd /");("." to run)> run ("shares");("." to run)> var projects;("." to run)> projects=list();("." to run)> printf("Number of projects is: %d\n",projects.length);("." to run)> projects=152;("." to run)> printf("Value of the projects variable as an integer is now: %d\n",projects);("." to run)> .Number of projects is: 7Value of the projects variable as an integer is now: 152You can also confirm this behaviour by checking the typeof variable we are dealing with:fishy10:> script("." to run)> run("cd /");("." to run)> run ("shares");("." to run)> var projects;("." to run)> projects=list();("." to run)> printf("var projects is of type %s\n",typeof(projects));("." to run)> projects=152;("." to run)> printf("var projects is of type %s\n",typeof(projects));("." to run)> .var projects is of type objectvar projects is of type numberArraysSo you likely noticed that we have already touched on arrays, as the list(); (in the shares context) stored an array into the 'projects' variable.But what if you want to declare your own array? Easy! This is very similar to Java and other languages, we just instantiate a brand new "Array" object using the keyword new:var myArray = new Array();will create an array called "myArray".A quick example:fishy10:> script("." to run)> testArray = new Array();("." to run)> testArray[0]="This";("." to run)> testArray[1]="is";("." to run)> testArray[2]="just";("." to run)> testArray[3]="a";("." to run)> testArray[4]="test";("." to run)> for (i=0; i < testArray.length; i++)("." to run)> {("." to run)>    printf("Array element %d is %s\n",i,testArray[i]);("." to run)> }("." to run)> .Array element 0 is ThisArray element 1 is isArray element 2 is justArray element 3 is aArray element 4 is testWorking With LoopsFor LoopFor loops are very similar to those you will see in C, java and several other languages. One of the key differences here is, as you were made aware earlier, we can be a bit more sloppy with our variable declarations.The general way you would likely use a for loop is as follows:for (variable; test-case; modifier for variable){}For example, you may wish to declare a variable i as 0; and a MAX_ITERATIONS variable to determine how many times this loop should repeat:var i=0;var MAX_ITERATIONS=10;And then, use this variable to be tested against some case existing (has i reached MAX_ITERATIONS? - if not, increment i using i++);for (i=0; i < MAX_ITERATIONS; i++){ // some work to do}So lets run something like this on the appliance:fishy10:> script("." to run)> var i=0;("." to run)> var MAX_ITERATIONS=10;("." to run)> for (i=0; i < MAX_ITERATIONS; i++)("." to run)> {("." to run)>    printf("The number is %d\n",i);("." to run)> }("." to run)> .The number is 0The number is 1The number is 2The number is 3The number is 4The number is 5The number is 6The number is 7The number is 8The number is 9While LoopWhile loops again are very similar to other languages, we loop "while" a condition is met. For example:fishy10:> script("." to run)> var isTen=false;("." to run)> var counter=0;("." to run)> while(isTen==false)("." to run)> {("." to run)>    if (counter==10) ("." to run)>    { ("." to run)>            isTen=true;   ("." to run)>    } ("." to run)>    printf("Counter is %d\n",counter);("." to run)>    counter++;    ("." to run)> }("." to run)> printf("Loop has ended and Counter is %d\n",counter);("." to run)> .Counter is 0Counter is 1Counter is 2Counter is 3Counter is 4Counter is 5Counter is 6Counter is 7Counter is 8Counter is 9Counter is 10Loop has ended and Counter is 11So what do we notice here? Something has actually gone wrong - counter will technically be 11 once the loop completes... Why is this?Well, if we have a loop like this, where the 'while' condition that will end the loop may be set based on some other condition(s) existing (such as the counter has reached 10) - we must ensure that we  terminate this iteration of the loop when the condition is met - otherwise the rest of the code will be followed which may not be desirable. In other words, like in other languages, we will only ever check the loop condition once we are ready to perform the next iteration, so any other code after we set "isTen" to be true, will still be executed as we can see it was above.We can avoid this by adding a break into our loop once we know we have set the condition - this will stop the rest of the logic being processed in this iteration (and as such, counter will not be incremented). So lets try that again:fishy10:> script("." to run)> var isTen=false;("." to run)> var counter=0;("." to run)> while(isTen==false)("." to run)> {("." to run)>    if (counter==10) ("." to run)>    { ("." to run)>            isTen=true;   ("." to run)>            break;("." to run)>    } ("." to run)>    printf("Counter is %d\n",counter);("." to run)>    counter++;    ("." to run)> }("." to run)> printf("Loop has ended and Counter is %d\n", counter);("." to run)> .Counter is 0Counter is 1Counter is 2Counter is 3Counter is 4Counter is 5Counter is 6Counter is 7Counter is 8Counter is 9Loop has ended and Counter is 10Much better!Methods to Obtain and Manipulate DataGet MethodThe get method allows you to get simple properties from an object, for example a quota from a user. The syntax is fairly simple:var myVariable=get('property');An example of where you may wish to use this, is when you are getting a bunch of information about a user (such as quota information when in a shares context):var users=list();for(k=0; k < users.length; k++){     user=users[k];     run('select ' + user);     var username=get('name');     var usage=get('usage');     var quota=get('quota');...Which you can then use to your advantage - to print or manipulate infomation (you could change a user's information with a set method, based on the information returned from the get method). The set method is explained next.Set MethodThe set method can be used in a simple manner, similar to get. The syntax for set is:set('property','value'); // where value is a string, if it was a number, you don't need quotesFor example, we could set the quota on a share as follows (first observing the initial value):fishy10:shares default/test-geoff> script("." to run)> var currentQuota=get('quota');("." to run)> printf("Current Quota is: %s\n",currentQuota);("." to run)> set('quota','30G');("." to run)> run('commit');("." to run)> currentQuota=get('quota');("." to run)> printf("Current Quota is: %s\n",currentQuota);("." to run)> .Current Quota is: 0Current Quota is: 32212254720This shows us using both the get and set methods as can be used in scripts, of course when only setting an individual share, the above is overkill - it would be much easier to set it manually at the cli using 'set quota=3G' and then 'commit'.List MethodThe list method can be very powerful, especially in more complex scripts which iterate over large amounts of data and manipulate it if so desired. The general way you will use list is as follows:var myVar=list();Which will make "myVar" an array, containing all the objects in the relevant context (this could be a list of users, shares, projects, etc). You can then gather or manipulate data very easily.We could list all the shares and mountpoints in a given project for example:fishy10:shares another-project> script("." to run)> var shares=list();("." to run)> for (i=0; i < shares.length; i++)("." to run)> {("." to run)>    run('select ' + shares[i]);("." to run)>    var mountpoint=get('mountpoint');("." to run)>    printf("Share %s discovered, has mountpoint %s\n",shares[i],mountpoint);("." to run)>    run('done');("." to run)> }("." to run)> .Share and-another discovered, has mountpoint /export/another-project/and-anotherShare another-share discovered, has mountpoint /export/another-project/another-shareShare bob discovered, has mountpoint /export/another-projectShare more-shares-for-all discovered, has mountpoint /export/another-project/more-shares-for-allShare yep discovered, has mountpoint /export/another-project/yepWriting More Complex and Re-Usable CodeFunctionsThe best way to be able to write more complex code is to use functions to split up repeatable or reusable sections of your code. This also makes your more complex code easier to read and understand for other programmers.We write functions as follows:function functionName(variable1,variable2,...,variableN){}For example, we could have a function that takes a project name as input, and lists shares for that project (assuming we're already in the 'project' context - context is important!):function getShares(proj){        run('select ' + proj);        shares=list();        printf("Project: %s\n", proj);        for(j=0; j < shares.length; j++)        {                printf("Discovered share: %s\n",shares[i]);        }        run('done'); // exit selected project}Commenting your CodeLike any other language, a large part of making it readable and understandable is to comment it. You can use the same comment style as in C and Java amongst other languages.In other words, sngle line comments use://at the beginning of the comment.Multi line comments use:/*at the beginning, and:*/ at the end.For example, here we will use both:fishy10:> script("." to run)> // This is a test comment("." to run)> printf("doing some work...\n");("." to run)> /* This is a multi-line("." to run)> comment which I will span across("." to run)> three lines in total */("." to run)> printf("doing some more work...\n");("." to run)> .doing some work...doing some more work...Your comments do not have to be on their own, they can begin (particularly with single line comments this is handy) at the end of a statement, for examplevar projects=list(); // The variable projects is an array containing all projects on the system.Try and Catch StatementsYou may be used to using try and catch statements in other languages, and they can (and should) be utilised in your code to catch expected or unexpected error conditions, that you do NOT wish to stop your code from executing (if you do not catch these errors, your script will exit!):try{  // do some work}catch(err) // Catch any error that could occur{ // do something here under the error condition}For example, you may wish to only execute some code if a context can be reached. If you can't perform certain actions under certain circumstances, that may be perfectly acceptable.For example if you want to test a condition that only makes sense when looking at a SMB/NFS share, but does not make sense when you hit an iscsi or FC LUN, you don't want to stop all processing of other shares you may not have covered yet.For example we may wish to obtain quota information on all shares for all users on a share (but this makes no sense for a LUN):function getShareQuota(shar) // Get quota for each user of this share{        run('select ' + shar);        printf("  SHARE: %s\n", shar);        try        {                run('users');                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","----");                                users=list();                for(k=0; k < users.length; k++)                {                        user=users[k];                        getUserQuota(user);                }                run('done'); // exit user context        }        catch(err)        {                printf("    SKIPPING %s - This is NOT a NFS or CIFs share, not looking for users\n", shar);        }        run('done'); // done with this share}Running Scripts Remotely over SSHAs you have likely noticed, writing and running scripts for all but the simplest jobs directly on the appliance is not going to be a lot of fun.There's a couple of choices on what you can do here:Create scripts on a remote system and run them over sshCreate scripts, wrapping them in workflow code, so they are stored on the appliance and can be triggered under certain circumstances (like a threshold being reached)We'll cover the first one here, and then cover workflows later on (as these are for the most part just scripts with some wrapper information around them).Creating a SSH Public/Private SSH Key PairLog on to your handy Solaris box (You wouldn't be using any other OS, right? :P) and use ssh-keygen to create a pair of ssh keys. I'm storing this separate to my normal key:[geoff@lightning ~] ssh-keygen -t rsa -b 1024Generating public/private rsa key pair.Enter file in which to save the key (/export/home/geoff/.ssh/id_rsa): /export/home/geoff/.ssh/nas_key_rsaEnter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /export/home/geoff/.ssh/nas_key_rsa.Your public key has been saved in /export/home/geoff/.ssh/nas_key_rsa.pub.The key fingerprint is:7f:3d:53:f0:2a:5e:8b:2d:94:2a:55:77:66:5c:9b:14 geoff@lightningInstalling the Public Key on the ApplianceOn your Solaris host, observe the public key:[geoff@lightning ~] cat .ssh/nas_key_rsa.pub ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc= geoff@lightningNow, copy and paste everything after "ssh-rsa" and before "user@hostname" - in this case, geoff@lightning. That is, this bit:AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc=Logon to your appliance and get into the preferences -> keys area for this user (root):[geoff@lightning ~] ssh [email protected]: Last login: Mon Dec  6 17:13:28 2010 from 192.168.0.2fishy10:> configuration usersfishy10:configuration users> select rootfishy10:configuration users root> preferences fishy10:configuration users root preferences> keysOR do it all in one hit:fishy10:> configuration users select root preferences keysNow, we create a new public key that will be accepted for this user and set the type to RSA:fishy10:configuration users root preferences keys> createfishy10:configuration users root preferences key (uncommitted)> set type=RSASet the key itself using the string copied previously (between ssh-rsa and user@host), and set the key ensuring you put double quotes around it (eg. set key="<key>"):fishy10:configuration users root preferences key (uncommitted)> set key="AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc="Now set the comment for this key (do not use spaces):fishy10:configuration users root preferences key (uncommitted)> set comment="LightningRSAKey" Commit the new key:fishy10:configuration users root preferences key (uncommitted)> commitVerify the key is there:fishy10:configuration users root preferences keys> lsKeys:NAME     MODIFIED              TYPE   COMMENT                                  key-000  2010-10-25 20:56:42   RSA    cycloneRSAKey                           key-001  2010-12-6 17:44:53    RSA    LightningRSAKey                         As you can see, we now have my new key, and a previous key I have created on this appliance.Running your Script over SSH from a Remote SystemHere I have created a basic test script, and saved it as test.ecma3:[geoff@lightning ~] cat test.ecma3 script// This is a test script, By Geoff Ongley 2010.printf("Testing script remotely over ssh\n");.Now, we can run this script remotely with our keyless login:[geoff@lightning ~] ssh -i .ssh/nas_key_rsa root@fishy10 < test.ecma3Pseudo-terminal will not be allocated because stdin is not a terminal.Testing script remotely over sshPutting it Together - An Example Completed Quota Gathering ScriptSo now we have a lot of the basics to creating a script, let us do something useful, like, find out how much every user is using, on every share on the system (you will recognise some of the code from my previous examples): script/************************************** Quick and Dirty Quota Check script ** Written By Geoff Ongley            ** 25 October 2010                    **************************************/function getUserQuota(usr){        run('select ' + usr);        var username=get('name');        var usage=get('usage');        var quota=get('quota');        var usage_g=usage / 1073741824; // convert bytes to gigabytes        var quota_g=quota / 1073741824; // as above        var quota_percent=0        if (quota > 0)        {                quota_percent=(usage / quota)*(100/1);        }        printf("    %20s        %8.2f           %8.2f           %d%%\n",username,usage_g,quota_g,quota_percent);        run('done'); // done with this selected user}function getShareQuota(shar){        //printf("DEBUG: selecting share %s\n", shar);        run('select ' + shar);        printf("  SHARE: %s\n", shar);        try        {                run('users');                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","--------");                                users=list();                for(k=0; k < users.length; k++)                {                        user=users[k];                        getUserQuota(user);                }                run('done'); // exit user context        }        catch(err)        {                printf("    SKIPPING %s - This is NOT a NFS or CIFs share, not looking for users\n", shar);        }        run('done'); // done with this share}function getShares(proj){        //printf("DEBUG: selecting project %s\n",proj);        run('select ' + proj);        shares=list();        printf("Project: %s\n", proj);        for(j=0; j < shares.length; j++)        {                share=shares[j];                getShareQuota(share);        }        run('done'); // exit selected project}function getProjects(){        run('cd /');        run('shares');        projects=list();                for (i=0; i < projects.length; i++)        {                var project=projects[i];                getShares(project);        }        run('done'); // exit context for all projects}getProjects();.Which can be run as follows, and will print information like this:[geoff@lightning ~/FISHWORKS_SCRIPTS] ssh -i ~/.ssh/nas_key_rsa root@fishy10 < get_quota_utilisation.ecma3Pseudo-terminal will not be allocated because stdin is not a terminal.Project: another-project  SHARE: and-another                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                  nobody            0.00            0.00        0%                 geoffro            0.05            0.00        0%                   Billy            0.10            0.00        0%                    root            0.00            0.00        0%            testing-user            0.05            0.00        0%  SHARE: another-share                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                    root            0.00            0.00        0%                  nobody            0.00            0.00        0%                 geoffro            0.05            0.49        9%            testing-user            0.05            0.02        249%                   Billy            0.10            0.29        33%  SHARE: bob                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                  nobody            0.00            0.00        0%                    root            0.00            0.00        0%  SHARE: more-shares-for-all                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                   Billy            0.10            0.00        0%            testing-user            0.05            0.00        0%                  nobody            0.00            0.00        0%                    root            0.00            0.00        0%                 geoffro            0.05            0.00        0%  SHARE: yep                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                    root            0.00            0.00        0%                  nobody            0.00            0.00        0%                   Billy            0.10            0.01        999%            testing-user            0.05            0.49        9%                 geoffro            0.05            0.00        0%Project: default  SHARE: Test-LUN    SKIPPING Test-LUN - This is NOT a NFS or CIFs share, not looking for users  SHARE: test-geoff                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                 geoffro            0.05            0.00        0%                    root            3.18           10.00        31%                    uucp            0.00            0.00        0%                  nobody            0.59            0.49        119%^CKilled by signal 2.Creating a WorkflowWorkflows are scripts that we store on the appliance, and can have the script execute either on request (even from the BUI), or on an event such as a threshold being met.Workflow BasicsA workflow allows you to create a simple process that can be executed either via the BUI interface interactively, or by an alert being raised (for some threshold being reached, for example).The basics parameters you will have to set for your "workflow object" (notice you're creating a variable, that embodies ECMAScript) are as follows (parameters is optional):name: A name for this workflowdescription: A Description for the workflowparameters: A set of input parameters (useful when you need user input to execute the workflow)execute: The code, the script itself to execute, which will be function (parameters)With parameters, you can specify things like this (slightly modified sample taken from the System Administration Guide):          ...parameters:        variableParam1:         {                             label: 'Name of Share',                             type: 'String'                  },                  variableParam2                  {                             label: 'Share Size',                             type: 'size'                  },execute: ....};  Note the commas separating the sections of name, parameters, execute, and so on. This is important!Also - there is plenty of properties you can set on the parameters for your workflow, these are described in the Sun ZFS Storage System Administration Guide.Creating a Basic Workflow from a Basic ScriptTo make a basic script into a basic workflow, you need to wrap the following around your script to create a 'workflow' object:var workflow = {name: 'Get User Quotas',description: 'Displays Quota Utilisation for each user on each share',execute: function() {// (basic script goes here, minus the "script" at the beginning, and "." at the end)}};However, it appears (at least in my experience to date) that the workflow object may only be happy with one function in the execute parameter - either that or I'm doing something wrong. As far as I can tell, after execute: you should only have a basic one function context like so:execute: function(){}To deal with this, and to give an example similar to our script earlier, I have created another simple quota check, to show the same basic functionality, but in a workflow format:var workflow = {name: 'Get User Quotas',description: 'Displays Quota Utilisation for each user on each share',execute: function () {        run('cd /');        run('shares');        projects=list();                for (i=0; i < projects.length; i++)        {                run('select ' + projects[i]);                shares=list('filesystem');                printf("Project: %s\n", projects[i]);                for(j=0; j < shares.length; j++)                {                        run('select ' +shares[j]);                        try                        {                                run('users');                                printf("  SHARE: %s\n", shares[j]);                                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","-------");                                users=list();                                for(k=0; k < users.length; k++)                                {                                        run('select ' + users[k]);                                        username=get('name');                                        usage=get('usage');                                        quota=get('quota');                                        usage_g=usage / 1073741824; // convert bytes to gigabytes                                        quota_g=quota / 1073741824; // as above                                        quota_percent=0                                        if (quota > 0)                                        {                                                quota_percent=(usage / quota)*(100/1);                                        }                                        printf("    %20s        %8.2f   %8.2f   %d%%\n",username,usage_g,quota_g,quota_percent);                                        run('done');                                }                                run('done'); // exit user context                        }                        catch(err)                        {                        //      printf("    %s is a LUN, Not looking for users\n", shares[j]);                        }                        run('done'); // exit selected share context                }                run('done'); // exit project context        }        }};SummaryThe Sun ZFS Storage 7000 Appliance offers lots of different and interesting features to Sun/Oracle customers, including the world renowned Analytics. Hopefully the above will help you to think of new creative things you could be doing by taking advantage of one of the other neat features, the internal scripting engine!Some references are below to help you continue learning more, I'll update this post as I do the same! Enjoy...More information on ECMAScript 3A complete reference to ECMAScript 3 which will help you learn more of the details you may be interested in, can be found here:http://www.ecma-international.org/publications/files/ECMA-ST-ARCH/ECMA-262,%203rd%20edition,%20December%201999.pdfMore Information on Administering the Sun ZFS Storage 7000The Sun ZFS Storage 7000 System Administration guide can be a useful reference point, and can be found here:http://wikis.sun.com/download/attachments/186238602/2010_Q3_2_ADMIN.pdf

    Read the article

< Previous Page | 19 20 21 22 23