Search Results

Search found 12895 results on 516 pages for 'multi boot'.

Page 230/516 | < Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >

  • Ubuntu 12.04 Server monitor goes into sleep mode (no display) after fresh install

    - by xamox
    For some reason I can boot and either use Ubuntu 12.04 server edition, or desktop version. I can live boot the disk, I can go through the installer, or even use the ubuntu alternate installer. But for some reason after the install completes and I reboot the monitor seems to go back into sleep mode and then never loads the command prompt. This is on an industrial adlink MXE-1300 PC. I've installed ubuntu server fine on other models of adlink machines but this one doesn't want to seem to play nice. To me it seems like if it was a video card issue than I could never even load the installer or run ubuntu in live mode. Any thoughts or troubleshooting tips would be greatly appreciated.

    Read the article

  • DualBoot 32Win & 64Mac from Live USB +Persistance

    - by josephsmendoza
    So I have a 32 bit Live USB with persistance that I use to write code, cause that's just how I roll. I can boot it onto my school computers(32 bit Win) no problem, but obviously not my Mac (2007 iMac, 64 Bit). Currently I use VMWare Fusion 6 Pro and a Plop Linux image to use the usb at home, but I can only get 900mb of ram for my VM. I was hoping to make a Live USB that can boot 32 bit and 64 bit for mac, with a shared persistance file, this way I can use my computer's full 2GB. Also, I'm not allowed edit any part of this Mac. Do Not reply telling me it's impossible. Please only solutions. Thank you, and have a unicorntastic day!

    Read the article

  • Newly updated ubuntu not loading in moniter.

    - by user211652
    I just recently upgraded from Ubuntu 12.04 to Ubuntu 12.10. I installed the update and tried to boot from the newly installed version. As I booted in it would pop up the loading screen and then I would lose signal and it would say that there was no signal on my monitor. How do I fix this because I really want to use the new version but if it's not going to work I'll just forget about it. I can however boot into the old install and I works fine.

    Read the article

  • Ubuntu Doesn't Start from USB After Installation

    - by Fred Venus
    My computer refuses to boot from the USB even after I change everything that I can possibly think of on my motherboard's BIOS. But I have booted from the USB twice in the past. The first time is when I first got the computer and needed to install a new operating system. The second time is when I installed Windows onto the whole hard drive and needed to reinstall Ubuntu. It seems that it only refuses to boot if there is already an existing installation of Ubuntu on the hard drive. Any ideas on what is going on?

    Read the article

  • Ubuntu 11.10 not showing up in GRUB bootloader after update and restart :(

    - by beginer
    I was using ubuntu 11.10 with gnome-shell. I installed various useful softwares and ran system update using update manager which ran smoothly and asked me to restart my comp at the end. I restarted it to find that Ubuntu entries were missing from the GRUB bootloader and only memory test and windows are showing up. I took a lot of pain in installing various important softwares and cannot afford a re-installation. Tried to boot from the live cd and installed boot-repair and after running it .. it wasnt working properly .. it was just showing that it was "scanning systems" for more than an hour. Kindly help. Thank you ..

    Read the article

  • Live USB does not work

    - by MARUF SARKER
    I've made live USB using these "Universal-USB-Installer-1.9.1.9", "unetbootin-windows-581", "YUMI-0.0.8.0" & "LinuxLive USB Creator 2.8.18" in "FAT32" format, but unfortunately I could not boot using the pen-drive. My BIOS supports boot from USB drive. When I am booting from the live usb, it just show black screen with a blinking "_", but nothing happens after that( I have waited more than 10 minutes, but nothing happens). So, can anyone please help me on this? [Additional Info.: I've made Bootable USB using PowerISO and that booted, but it was not possible to access the USB normally afterwards,because PowerISO formatted the USB Drive as RAW(or anything I don't know) and it became 8GB to 700MB, afterwards I had to format it using MiniTool Partition manager.]

    Read the article

  • Unknown file system: grub Rescue

    - by samba
    I deleted the partition which contains the Ubuntu 12.0.4 OS. I have windows one other drive. When I reboot the system, It shows the following. unknown filesystem. grub rescue I read the previous questions about this topic and I tried to install Linux again using usb flash drive but was unable to boot from flash drive. I do not have a DVD ROM... what Shall I do now to boot from windows...? thank you in advance....

    Read the article

  • Changing OS from Windows to Ubuntu

    - by Shadowinnothing
    So my computer has 2 operating systems on it, Windows 7 and Ubuntu 12.04. When I downloaded Ubuntu i had a ton of trouble booting windows 7 up again, then I downloaded GRUB and switched my default OS back to Windows. Sadly though, I'm trying to get into writing php with Apache. I Downloaded WAMP (windows Apache MySQL php) but for some reason, php doesn't work. I though i would try downloading LAMP (Linux apace MySQL php) but whenever I boot up my PC, I don't get a chance to enter the Ubuntu OS. How could I get back to running Ubuntu? Actually, it doesn't prompt me for a boot menu or anything. It just goes straight to the windows symbol

    Read the article

  • Machine check error on ASUS while booting from USB

    - by user100453
    I put the last Ubuntu iso on my USB stick using UNetBootin, after formatting it to fat32. I've already done that before with other operating systems and it worked. I can't actually boot Ubuntu from USB since I get a black screen with the error "Machine check error" on top the an automatic reboot happens. The error appears right after the boot, I can't see anything else before. I'm using my ASUS X54L latop. Does anybody know how to solve this? Installation from CD/DVD works.

    Read the article

  • Wrong EFI System Partition GUID?

    - by artificer
    On a new GPT initialized disk (second PC disk) I created a FAT32 partition using gparted. I want to use it as an EFI System Partition so I flagged it as boot. After that I checked the UUID using the gparted “partition information” option and it reported: 09B1-97A5. As far as I understand it should be C12A7328-F81F-11D2-BA4B-00A0C93EC93B. I also checked my running operative system disk (Ubuntu 14) and found that Gparted reports EB78-9AD2 for my actual boot partition UUID. What exactly is gparted reporting as UUID on my EFI system partition and why it doesn’t match with the expected C12A7328-F81F-11D2-BA4B-00A0C93EC93B ID?

    Read the article

  • Ubuntu installation time problem

    - by hellodear
    I am installing Ubuntu and I am stuck at a point. The step is when it is asking me to select partition. It is showing me error: "No file system is defined Please correct this from partitioning menu". I am getting this error when I am clicking "Install". I want Ubuntu to install in /dev/sda7 which is 226727 Mb. I have Windows 8 in my system and I want to dual boot the system. So how to correct this error? I want to allocate this whole partition to Ubuntu only. Secondly, What should I put in the option: "Device for boot loader installation"? By default it is somewhat like this: "ATA WDC WD5000..." something like this. Please tell my both these questions. I would be very thankful to you. Thanks.

    Read the article

  • Problem installing Lubuntu 11.04

    - by anyhelpisapreciated
    After I boot the Live-CD I can't select try Lubuntu or Install Lubuntu and I end up hanging on that screen. My PC specs are: Compaq Presario s4214bd 2.4ghz Intel Celeron. Windows XP/Ubuntu 10.04 dual boot. 768mb Ram. Nvidia 6200 Graphics card (I've switched between the onboard and PCI(this one) still no luck). I really want to use Lubuntu and I've been trying everything for the past 2-3 hours. Anything will help.

    Read the article

  • Opening programs very slow on ubuntu 12.10

    - by Mislav Blaževic
    When I open any program for first time after boot, it loads VERY slowly (Doesn't matter how long after boot). For example, terminal takes 2-3 seconds, skype and firefox often take much longer. If I close it and open again, it loads in reasonable time (<1 second). I got Intel Core i5-2500K CPU @ 3.30GHz, so it shouldn't be hardware issue... What is causing this? Disk benchmark: Average read time: 115.5 MB/s (100 samples) Average write time: 98.7 MB/s (100 samples) Average access time: 11.79 msec (1000 samples)

    Read the article

  • Ubuntu launch option on startup remains

    - by rQw
    I used windows installer to install Ubuntu and it was getting errors on bootup. Well that didn't work, I guess I'll try and boot from a USB to install it. However, after messing around with uninstalling (aka deleting Ubuntu folder after booting into Win7) I cannot get rid of the launch option. There is nothing in Computer Management because I never actually booted into Ubuntu to create space on my HDD for the OS. I can't just uninstall using Program and Features in Control Panel (because I already deleted the folder) Now everytime I boot up it gives me the options of booting into Windows 7 or Ubuntu, how do I disable this page/get rid of the Ubuntu launch option?

    Read the article

  • TWAIN scanning components for Delphi.

    - by Larry Lustig
    I need to add TWAIN scanning to an Delphi application and am having trouble locating an off-the-shelf component to do so. I downloaded TDelphiTwain but, when used in D2010 on Windows Vista, it does not appear to recognize any Twain sources on my system. I also tried the trial version of Twain Toolkit for Delphi from MCM which has the advantage of being currently updated (DelphiTwain's last update was 2004), but the Twain Toolkit will not even compile on my system (I think some of the DCUs are out of date). Can anyone suggest a simple method of getting TWAIN scanning into my Delphi application? UPDATE: Using vcldeveloper's update to DelphiTwain (see below) I was able to get this working. Also, I also discovered that Envision Image Library supports Twain scanning as well as assisting in handling multi-page TIFFs, and has been updated for compatibility with D2010. Late Breaking UPDATE VCLDeveloper's code, below, works fine. However, I settled on Envision library which includes the ability to easily create multi-page TIFF files. I got the Envision scanning, including multi-page file handling, implemented in a few hours.

    Read the article

  • Perl Lingua giving weird error on install

    - by user299306
    I am trying to install perl Lingua onto a unix system (ubuntu, latest version). Of course I am root. when I go into the package to install using 'perl Makefile.pl' I get this dumb error: [root@csisl27 Lingua-Lid-0.01]# perl Makefile.PL /opt/ls//lib does not exist at Makefile.PL line 48. I have tried playing with the path on line 48, nothing changes, here is what line 48-50 looks like: Line 48: die "$BASE/lib does not exist" unless -d "$BASE/lib"; Line 49: die "$BASE/include does not exist" unless -d "$BASE/include"; Line 50: die "lid.h is missing in $BASE/include" unless -e "$BASE/includ/lid.h"; The variable $BASE is declared as this: $BASE = "/opt/ls/" if ($^O eq "linux" or $^O eq "solaris"); $BASE = "/usr/local/" if ($^O eq "freebsd"); $BASE = $ENV{LID_BASE_DIR} if (defined $ENV{LID_BASE_DIR}); Now the perl program I am trying to write simply look like this (just my base): #!/usr/bin/perl use Lingua::LinkParser; use strict; print "Hello world!\n"; When I run this trying to use Lingua, here is my error: [root@csisl27 assign4]# ./perl_parser_1.pl Can't locate Lingua/LinkParser.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.10.0/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl/5.10.0/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl .) at ./perl_parser_1.pl line 3. BEGIN failed--compilation aborted at ./perl_parser_1.pl line 3. Tried insalling this from cpan, still doesn't properly work.

    Read the article

  • Parsing multibyte string in PHP

    - by Petr Peller
    I would like to write a (HTML) parser based on state machine but I have doubts how to acctually read/use an input. I decided to load the whole input into one string and then work with it as with an array and hold its index as current parsing position. There would be no problems with single-byte encoding, but in multi-byte encoding each value does not represent a character, but a byte of a character. Example: $mb_string = 'žšcr'; //4 multi-byte characters in UTF-8 for($i=0; $i < 4; $i++) { echo $mb_string[$i], PHP_EOL; } Outputs: L ž L A This means I cannot iterate through the string in a loop to check single characters, because I never know if I am in the middle of an character or not. So the questions are: How do I multi-byte safe read a single character from a string in a performance friendly way? Is it good idea to work with the string as it was an array in this case? How would you read the input?

    Read the article

  • How do I create self-relationships in polymorphic inheritance in Elixir and Pylons?

    - by Turukawa
    I am new to programming and am following the example in the Pylons documentation on creating a Wiki. The database I want to link to the wiki was created with Elixir so I rewrote the Wiki database schema and have continued from there. In the wiki there is a requirement for a Navigation table which is inherited by Pages and Sections. A section can have many pages, while a page can only have one section. In addition, each sibling node can be chain-referenced to each other. So: Nav has "section" (OneToMany) and "before" (OneToOne - to reference preceeding node) Page has "section" (ManyToOne - many pages in one section) and inherits "before" Section inherits all from Nav The code I've written looks like this: class Nav(Entity): using_options(inheritance='multi') name = Field(Unicode(30), default=u'Untitled Node') path = Field(Unicode(255), default=u'') section = OneToMany('Page', inverse='section') after = OneToOne('Nav', inverse='before') before = OneToMany('Nav', inverse='after') class Page(Nav): using_options(inheritance='multi') content = Field(UnicodeText, nullable=False) posted = Field(DateTime, default=now()) title = Field(Unicode(255), default=u'Untitled Page') heading = Field(Unicode(255)) tags = ManyToMany('Tag') comments = OneToMany('Comment') section = ManyToOne('Nav', inverse='section') class Section(Nav): using_options(inheritance='multi') Errors received on this: sqlalchemy.exc.OperationalError: (OperationalError) table nav has no column named aftr_id u'INSERT INTO nav (name, path, aftr_id, row_type) VALUES (?, ?, ?, ?)' I've also tried: before = ManyToMany('Nav', inverse='before') on Nav in the hopes this might break the problem, but also not. The original SQLAlchemy code from the tutorial for these declarations is as follows: nav_table = schema.Table('nav', meta.metadata, schema.Column('id', types.Integer(), schema.Sequence('nav_id_seq', optional=True), primary_key=True), schema.Column('name', types.Unicode(255), default=u'Untitled Node'), schema.Column('path', types.Unicode(255), default=u''), schema.Column('section', types.Integer(), schema.ForeignKey('nav.id')), schema.Column('before', types.Integer(), default=None), schema.Column('type', types.String(30), nullable=False) ) page_table = schema.Table('page', meta.metadata, schema.Column('id', types.Integer, schema.ForeignKey('nav.id'), primary_key=True), schema.Column('content', types.Text(), nullable=False), schema.Column('posted', types.DateTime(), default=now), schema.Column('title', types.Unicode(255), default=u'Untitled Page'), schema.Column('heading', types.Unicode(255)), ) section_table = sa.Table('section', meta.metadata, schema.Column('id', types.Integer, schema.ForeignKey('nav.id'), primary_key=True), ) orm.mapper(Nav, nav_table, polymorphic_on=nav_table.c.type, polymorphic_identity='nav') orm.mapper(Section, section_table, inherits=Nav, polymorphic_identity='section') orm.mapper(Page, page_table, inherits=Nav, polymorphic_identity='page', properties={ 'comments':orm.relation(Comment, backref='page', cascade='all'), 'tags':orm.relation(Tag, secondary=pagetag_table) }) Any help is much appreciated.

    Read the article

  • Many tables for many users?

    - by Seagull
    I am new to web programming, so excuse the ignorance... ;-) I have a web application that in many ways can be considered to be a multi-tenant environment. By this I mean that each user of the application gets their own 'custom' environment, with absolutely no interaction between those users. So far I have built the web application as a 'single user' environment. In other words, I haven't actually done anything to support multi-users, but only worked on the functionality I want from the app. Here is my problem... What's the best way to build a multi-user environment: All users point to the same 'core' backend. In other words, I build the logic to separate users via appropriate SQL queries (eg. select * from table where user='123' and attribute='456'). Each user points to a unique tablespace, which is built separately as they join the system. In this case I would simply generate ALL the relevant SQL tables per user, with some sort of suffix for the user. (eg. now a query would look like 'select * from table_ where attribute ='456'). In short, it's a difference between "select * from table where USER=" and "select * from table_USER".

    Read the article

  • Are multiline queries sql-injection safe?

    - by acmatos
    This might be a stupid question. Or maybe my hacking skills are limited (I don't practice them at all). I have a query that looks like this: <?php $query =<<<eot SELECT table_x.field1, table_x.field2, table_y.*, table_z.field4 FROM ( SELECT ... ) as table_y LEFT JOIN table_x ON table_x.field1 = table_y.field_x LEFT JOIN table_z ON table_z.field1 = table_y.field_z WHERE table_x.field3 = '$something' AND table_z.field4 = '1' AND table_z.field5 = '2' eot; ?> I have a lot of other tests on $something before it gets used, like $something = explode(' ',$something); (which later result in a string) none of them intend to prevent injection but they make it hard for the given injection to get as is to the actual query. However, there are ways. We all know how easy it is to replace a space for something else which is still valid.. So, it's not really a problem to make a potentially harmful piece of SQL reach that $something... But is there any way to comment the rest of the original query string if it is multi-line? I can comment AND table_z.field4 = '1' using ;-- but can't comment the following AND table_z.field5 = '2' Is it possible to open a multi-line comment /* without closing it or something looked like and therefore allow the injection to ignore the multi-line query?

    Read the article

  • Problem booting virtual machine after converting VMDK to VHD

    - by vg1890
    I used the VMWare VCenter Converter Standalone Client to convert a physical drive on my old PC to a virtual drive. The conversion worked fine and I ended up with a valid VMDK file. Next, I wanted to convert the VMDK to a VHD for use with Microsoft Virtual PC, since that's what I use on my new box. I used WinImage for the conversion and that worked fine, too. I can access the files from the virtual drive through WinImage. However, when I create a new virtual machine using Virtual PC and add the existing VHD file, the machine doesn't boot. The initial boot screen flashes with the amount of RAM and then the screen goes black. If I turn off the VM and reboot in safe mode I can see the drivers being loaded until eventually it gets to crcdisk.sys and hangs indefinitely. Any ideas how to fix this? I'm not opposed to starting over from scratch if there's another method to turn my physical machine into a Virtual PC VM. Thanks! EDIT - I should add that the virtual drive is a system boot drive and not a secondary drive. EDIT - I tried booting from the install CD and doing a repair. The result was that the system could not be repaired due to a "driver error."

    Read the article

  • Windows XP SP3 Keyboard stops working

    - by Kevin K
    Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windoze at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

    Read the article

  • How to update-grub on a system running overlayroot?

    - by mikepurvis
    We ship boxes configured with overlayroot, using the following overlayroot.conf: overlayroot=device:dev=/dev/sda6,timeout=20,recurse=0 Which produces the following mount configuration: $ mount overlayroot on / type overlayfs (rw,errors=remount-ro) /dev/sda5 on /media/root-ro type ext3 (ro,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered) /dev/sda6 on /media/root-rw type ext3 (rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered) /dev/sda1 on /boot type ext3 (rw) As you can see, three key physical partitions: sda1 is /boot, sda5 is a read-only "factory" root, and sda6 is a "user" root which can be wiped at any point to restore the machine to its original factory state. Now, the problem arises when update-grub is run for any reason: $ sudo update-grub [sudo] password for administrator: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). Understandable, since / is an overlayfs. The contents of /usr/sbin/update-grub are: #!/bin/sh set -e exec grub-mkconfig -o /boot/grub/grub.cfg "$@" With /usr/sbin/grub-mkconfig being the business part of things. But the actual problem is in /usr/sbin/grub-probe, called by grub-mkconfig, and grub-probe is a binary. So my question is, is there a parameter or whatever which can make grub-probe do the right thing in the face of / being an overlayfs? And secondly, is there a way to hack/patch that in so that the update-grub script just does the right thing? Thanks.

    Read the article

  • Error when trying to deploy Windows XP SP3 with WDS

    - by Nic Young
    I have created a WDS server running Windows Server 2008 R2. I have built my custom images of Windows 7 using WAIK and MDT 2010 that are installed on the server. I used this guide to help me through the process. The Windows 7 images that I have created capture and deploy properly. I am attempting to follow the same steps from the guide I linked to capture and deploy a Windows XP SP3 image. I am able to sysprep and capture the reference machine with no errors. I am then able to import the custom .wim that I just captured in to MDT 2010 with no issues either. However when I try to deploy this image to a test virtual machine I get the following error: Deployment Error: I have made sure that the .iso that I am importing the source files from originally to create the sysprep and capture sequence is indeed a Windows XP SP3 iso. When I first select a PE boot environment before I deploy I select the x86 PE boot image that I created originally when making this for my Windows 7 deployments. Could this be the issue? If so how do I make a boot image specific for Windows XP SP3 deployments? I have Googled around for this error and some places point to the deployment image not being able to find setup.exe and other important system files for installing the operating system. If so, how do I add these to the image? Any ideas?

    Read the article

  • Windows XP SP3 Keyboard stops working

    - by Kevin K
    Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windows at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

    Read the article

< Previous Page | 226 227 228 229 230 231 232 233 234 235 236 237  | Next Page >