Search Results

Search found 6508 results on 261 pages for 'bug tracker'.

Page 236/261 | < Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >

• Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubuntu Lucid

  - by MIDoubleKO

  I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

  Read the article

• HTTP Content-type header for cached files

  - by Brian

  Hello, Using Apache with mod_rewrite, when I load a .css or .js file and view the HTTP headers, the Content-type is only set correctly the first time I load it - subsequent refreshes are missing Content-type altogether and it's creating some problems for me. Specifically, gzip is not compressing these files. I can get around this by appending a random query string value to the end of each filename, eg. http://www.site.com/script.js?12345 However, I don't want to have to do that, since caching is good and all I want is for the Content-type to be present. I've tried using a RewriteRule to force the type but still didn't solve the problem. Any ideas? Thanks, Brian More Details: HTTP headers WITHOUT random query string value: http://localhost/script.js GET /script.js HTTP/1.1 Host: localhost User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: */* Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Referer: http://localhost/ Cookie: PHPSESSID=ke3p35v5qbus24che765p9jni5; If-Modified-Since: Thu, 29 Apr 2010 15:49:56 GMT If-None-Match: "3440e9-119ed-485621404f100" Cache-Control: max-age=0 HTTP/1.1 304 Not Modified Date: Thu, 29 Apr 2010 20:19:44 GMT Server: Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 PHP/5.3.1 Connection: Keep-Alive Keep-Alive: timeout=5, max=100 Etag: "3440e9-119ed-485621404f100" Vary: Accept-Encoding X-Pad: avoid browser bug HTTP headers WITH random query string value: http://localhost/script.js?c947344de8278053f6edbb4365550b25 GET /script.js?c947344de8278053f6edbb4365550b25 HTTP/1.1 Host: localhost User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: */* Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Referer: http://localhost/ Cookie: PHPSESSID=ke3p35v5qbus24che765p9jni5; HTTP/1.1 200 OK Date: Thu, 29 Apr 2010 20:14:40 GMT Server: Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 PHP/5.3.1 Last-Modified: Thu, 29 Apr 2010 15:49:56 GMT Etag: "3440e9-119ed-485621404f100" Accept-Ranges: bytes Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 24605 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: application/javascript

  Read the article

• opening adobe reader results in infinite explorer.exe process creation loop

  - by irrational John

  First, apologies if the answer to this is only a Google away. I tried, honest I did. But I wasn't able to find anything about this problem posted elsewhere. I'm using Adobe Reader v9.3.2 in Windows 7 Home Premium 64-bit. If you want more system details, then just request them. What happens is that when I attempt to open a PDF by clicking "Open" on it then (1) adobe reader never opens and (2) the explorer.exe program is (apparently) recursively opened. I base this on opening the Task Manager and seeing a long list of explorer.exe processes under the "Processes" tab. Usually there is only one. When I recreate this problem, the list of explorer.exe processes are at least a page or two long. (Too many to bother counting). I "correct" this problem by logging off and then logging back on. This kills all the explorer.exe tasks. Unfortunately I don't know another way to terminate them all. Now here's the curious part. This only happens when I attempt to "Open" a PDF file. If instead I use the context menu (right mouse click on the PDF) and select "Open with" and "Adobe Reader 9.3" then Adobe Reader opens the file with no problem. It seems that there is something wrong with the setting for the default open action for PDF files. However, I have been unable to fix this by changing the Windows setting. Here is what I have tried. When I open Control Panel > All Control Panel Items > Default Programs > Set Associations I do not find an entry for file type .pdf. There are only entries for .pdfxml and .pdx. When use "Open with" on a PDF file and select "Choose default program", the check box for "Always use the selected program to open this kind of file" is disabled (greyed out). I have uninstalled and reinstalled Adobe Reader but the problem persists. While obviously no lives are at stake here, this problem is annoying the frickin' heck out of me. If I forget and recreate this bug then I have to stop everything I'm doing to stop it. Any suggestions on how I might go about fixing this?

  Read the article

• init never reaping zombie/defunct processes

  - by st9

  Hi, On my Fedora Core 9 webserver with kernel 2.6.18.8, init isn't reaping zombie processes. This would be bearable if it wasn't for the process table eventually reaching an upper limit where no new processes can be allocated. Sample output of ps -el | grep 'Z': F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY TIME CMD 5 Z 0 2648 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 1 Z 51 2656 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 1 Z 0 2670 1 0 75 0 - 0 exit ? 00:00:02 crond <defunct> 4 Z 0 2874 1 0 82 0 - 0 exit ? 00:00:00 mysqld_safe <defunct> 5 Z 0 28104 1 0 76 0 - 0 exit ? 00:00:00 httpd <defunct> 5 Z 0 28716 1 0 76 0 - 0 exit ? 00:00:06 lfd <defunct> 5 Z 74 10172 1 0 75 0 - 0 exit ? 00:00:00 sshd <defunct> 5 Z 0 11199 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 5 Z 0 11202 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 5 Z 0 11205 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 5 Z 0 11208 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 5 Z 0 11211 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 5 Z 0 11240 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 5 Z 0 11246 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 5 Z 0 11249 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 5 Z 0 11252 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> 1 Z 0 14106 1 0 80 0 - 0 exit ? 00:00:00 anacron <defunct> 5 Z 0 14631 1 0 75 0 - 0 exit ? 00:00:00 sendmail <defunct> Is this an OS bug? misconfiguration? I'm looking for inspiration as to the source of this problem. Thanks

  Read the article

• Trying to install Rmagick on Debian

  - by Janak

  One of things you need to do to get Rmagick installed apt-get install libmagick9-dev When I try that I get the following errors Reading package lists... Done Building dependency tree... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: libmagick9-dev: Depends: libjpeg62-dev but it is not going to be installed Depends: libbz2-dev but it is not going to be installed Depends: libtiff4-dev but it is not going to be installed Depends: libwmf-dev (>= 0.2.7-1) but it is not going to be installed Depends: libz-dev Depends: libpng12-dev but it is not going to be installed Depends: libfreetype6-dev but it is not going to be installed Depends: libexif-dev but it is not going to be installed Depends: libdjvulibre-dev but it is not going to be installed Depends: librsvg2-dev but it is not going to be installed Depends: libgraphviz-dev but it is not going to be installed E: Broken packages I don't know what to do to fix this? EDIT 1: I tried sudo apt-get install librmagick-ruby and it worked fine but then I needed to install the fleximage gem gem1.8 install fleximage and I got the following error message Building native extensions. This could take a while... ERROR: Error installing fleximage: ERROR: Failed to build gem native extension. /usr/bin/ruby1.8 extconf.rb checking for Ruby version >= 1.8.5... yes checking for cc... yes checking for Magick-config... no Can't install RMagick 2.12.2. Can't find Magick-config in /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/var/lib/gems/1.8/bin *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/bin/ruby1.8 Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/rmagick-2.12.2 for inspection. Results logged to /usr/lib/ruby/gems/1.8/gems/rmagick-2.12.2/ext/RMagick/gem_make.out

  Read the article

• Ubuntu Lucid: Erratic screen behaviour after boot

  - by fgysin

  In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

  Read the article

• Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

  - by Pro Backup

  In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

  Read the article

• Using IIS7 why are my PNGs being cached by the browser, but my JS and CSS files not?

  - by Craig Shearer

  I am trying to sort out caching in IIS for my site. Basically, I want nothing cached, except for .png, .js, and .css files. At my site level, I opened the HTTP Reponse Headers and used the "Set Common Hedaers..." to set content to expire immediately. I have no Output Caching profiles set at any level in IIS. I clear my browser cache then try accessing my site. When my site requests a PNG file, I see responses like: Accept-Ranges bytes Age 0 Connection Keep-Alive Content-Type image/png Date Thu, 12 Apr 2012 21:55:15 GMT Etag "83b7322de318cd1:0" Last-Modified Thu, 12 Apr 2012 19:33:45 GMT Server Microsoft-IIS/7.5 X-Powered-By ASP.NET For JS and CSS files, I see responses like: Accept-Ranges bytes Cache-Control no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 597 Content-Type text/css Date Thu, 12 Apr 2012 21:55:15 GMT Etag "06e45ede15bca1:0" Last-Modified Mon, 02 Nov 2009 17:28:44 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET Accept-Ranges bytes Cache-Control no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 42060 Content-Type application/x-javascript Date Thu, 12 Apr 2012 21:55:14 GMT Etag "2356302de318cd1:0" Last-Modified Thu, 12 Apr 2012 19:33:45 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET So, why are my PNGs able to be cached, but JS and CSS files not? Then, I go into the Output Caching feature in IIS and set up profiles for .png, .css, and .js files. This updates the web.config file as follows: <caching> <profiles> <add extension=".png" policy="CacheUntilChange" kernelCachePolicy="DontCache" /> <add extension=".css" policy="CacheUntilChange" kernelCachePolicy="DontCache" /> <add extension=".js" policy="CacheUntilChange" kernelCachePolicy="DontCache" /> </profiles> </caching> I do a "precautionary" IISReset then try accessing my site again. For PNG files, I see the following response: Accept-Ranges bytes Age 0 Connection Keep-Alive Content-Length 3833 Content-Type image/png Date Thu, 12 Apr 2012 22:02:30 GMT Etag "0548c9e2c5dc81:0" Last-Modified Tue, 22 Jan 2008 19:26:00 GMT Server Microsoft-IIS/7.5 X-Powered-By ASP.NET For CSS and JS files, I see the following responses: Accept-Ranges bytes Cache-Control no-cache,no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 2680 Content-Type application/x-javascript Date Thu, 12 Apr 2012 22:02:29 GMT Etag "0f743af9015c81:0" Last-Modified Tue, 23 Oct 2007 16:20:54 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET Accept-Ranges bytes Cache-Control no-cache,no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 3831 Content-Type text/css Date Thu, 12 Apr 2012 22:02:29 GMT Etag "c3f42d2de318cd1:0" Last-Modified Thu, 12 Apr 2012 19:33:45 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET What am I doing wrong? Have I completely misunderstood the features of IIS, or is there a bug. Most importantly, how do I achieve what I want - that is get the browser to cache only PNG, JS and CSS files?

  Read the article

• Why is mount -a not mounting fuse drive properly when executed remotely (via Fabric)?

  - by Jim D

  This is a weird bug and I'm not sure where it's coming from. Here's a quick run down of what I'm doing. I'm trying to mount a FUSE drive to an Amazon EC2 instance running Ubuntu 10.10 using s3fs (FUSE over Amazon). s3fs is compiled from source according to the instructions etc. I've also added an entry to /etc/fstab so that the drive mounts on boot. Here's what /etc/fstab looks like: # /etc/fstab: static file system information. # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 LABEL=uec-rootfs / ext4 defaults 0 0 /dev/sda2 /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 /dev/sda3 none swap sw,comment=cloudconfig 0 0 s3fs#mybucket /mnt/s3/mybucket fuse default_acl=public-read,use_cache=/tmp,allow_other 0 0 So the good news is that this works fine. On reboot the connection mounts correctly. I can also do: $ sudo umount /mnt/s3/mybucket $ sudo mount -a $ mountpoint /mnt/s3/mybucket /mnt/s3/mybucket is a mountpoint Great, right? Well here's the problem. I'm using Fabric to automate the process of building and managing this instance. I noticed I was getting this error message when using Fabric to build s3fs and set up the mount process: mountpoint: /mnt/s3/mybucket: Transport endpoint is not connected I isolated it down the the problem and built a fabric task that reproduces the problem: def remount_s3fs(): sudo("mount -a") Which does: [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] Executing task 'remount_s3fs' [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] sudo: mount -a [And yes, I was sure to unmount it before running this task.] When I check the mount using mountpoint I get: $ mountpoint /mnt/s3/mybucket mountpoint: /mnt/s3/mybucket: Transport endpoint is not connected Done. But if I run sudo mount -a at the command line, it works. Hrm. Here is that fab task output again, this time in full debug mode: [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] Executing task 'remount_s3fs' [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] sudo: sudo -S -p 'sudo password:' /bin/bash -l -c "mount -a" Again, I get that transport endpoint not connected error. I've also tried copying and pasting the exact command run into my ssh session (i.e. sudo -S -p 'sudo password:' /bin/bash -l -c "mount -a") and it works fine. So...that's my problem. Any ideas?

  Read the article

• Anyone else experiencing high rates of Linux server crashes during a leap second day?

  - by Bron Gondwana

  POSTMORTEM Anticlimax: only thing that died was my VPN (openvpn) link to the cluster, so there was an exciting few seconds while it re-established. Everything else was fine. Starting back ntp everywhere. If you look at Marco's blog at http://my.opera.com/marcomarongiu/blog/2012/06/01/an-humble-attempt-to-work-around-the-leap-second - he has a solution for phasing the time change over 24 hours using ntpd -x to avoid the 1 second skip. Give that a go if it matters to you. For the systems I run, the jump isn't a problem. Just today, Sat June 30th - starting soon after the start of the day GMT. We've had a handful of blades in different datacentres as managed by different teams all go dark - not responding to pings, screen blank. They're all running Debian Squeeze - with everything from stock kernel to custom 3.2.21 builds. Most are Dell M610 blades, but I've also just lost a Dell R510 and other departments have lost machines from other vendors too. There was also an older IBM x3550 which crashed and which I thought might be unrelated, but now I'm wondering. The one crash which I did get a screen dump from said: [3161000.864001] BUG: spinlock lockup on CPU#1, ntpd/3358 [3161000.864001] lock: ffff88083fc0d740, .magic: dead4ead, .owner: imapd/24737, .owner_cpu: 0 Unfortunately the blades all supposedly had kdump configured, but they died so hard that kdump didn't trigger - and they had console blanking turned on. I've disabled console blanking now, so fingers crossed I'll have more information after the next crash. Just want to know if it's a common thread or "just us". It's really odd that they're different units in different datacentres bought at different times and run by different admins (I run the FastMail.FM ones)... and now even different vendor hardware. Most of the machines which crashed had been up for weeks/months and were running 3.1 or 3.2 series kernels. The most recent crash was a machine which had only been up about 6 hours running 3.2.21. THE WORKAROUND Ok people, here's how I worked around it. disabled ntp: /etc/init.d/ntp stop created http://linux.brong.fastmail.fm/2012-06-30/fixtime.pl (code stolen from Marco, see blog posts in comments) ran fixtime.pl without an argument to see that there was a leap second set ran fixtime.pl with an argument to remove the leap second NOTE: depends on adjtimex. I've put a copy of the squeeze adjtimex binary at http://linux.brong.fastmail.fm/2012-06-30/adjtimex - it will run without dependencies on a squeeze 64 bit system. If you put it in the same directory as fixtime.pl, it will be used if the system one isn't present. Obviously if you don't have squeeze 64 bit... find your own. I'm going to start ntp again tomorrow. As an anonymous user suggested - an alternative to running adjtimex is to just set the time yourself, which will presumably also clear the leapsecond counter.

  Read the article

• Windows 7, weird/annoying explorer problem

  - by Shiki

  First of all, I'm asking the moderators if you could summarize my problem in the Title and modify it according to that. Thanks in advance and sorry, my english is not that good. The problem. It happened on two of my machines already. Once it happens there are many problems with explorer. I'll try to describe at precisely I just can. So. Basically when you create a new folder, you have to hit the enter key TWICE because first it'll throw an error that "there is no such file..". Okay. Then if you try to delete some, this happens also. Renaming is the same. Here is an example. I tried adding a "2" to the end of the folder name, hit enter and got this. Here I can press cancel, nothing happens. If I press retry, the popup disappears and it'll finally change the folder name. I can't come up with anything for this. Using BitDefender (registered, full protection), Windows 7 x86 Ultimate retail (boxed, english version). The other PC had the same anti-virus protection , but it have a Windows 7 x64. Both systems are activated, updated totally. I don't remember installing any new stuff on the PCs. All the stuff on the PCs are legal, no cracked / any other software present. It just happened, so to say. Already reinstalled the other PC because I thought * I * messed up something and its just something FUBAR. However, I dont want to reinstall my laptop also. Any ideas are welcome. (Today I had a strange bug. Windows Explorer had 1.0+gb memory usage with 100% cpu. Killed it, launched a new explorer.exe and thats all. Nothing changed, but it may worth a try. The other PC did NOT have this problem, ever.) Isn't there a registry fix for this or something? :/

  Read the article

• Unable to load type error in ASP.NET 4 application on Windows Server 2003 / IIS6 -- only happens after first worker process recycle

  - by Daniel Coffman

  I'm running an ASP.NET 4.0 web application on IIS6 (Windows Server 2003 x64). This app is one of many running on this server under the Default Web Site -- but is alone on it's own application pool because the other sites are all running ASP.NET 2.0 still. When I deploy my application, it works just fine until the application pool recycles or kills its worker process (by default 2 hours or 20 minutes with no activity). After this, I get the error: "Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information." Refreshing the page, recycling the application pool, and iisreset do nothing. But, I can bring the site back online again for a little while by simply redeploying it. The stack trace seems to start at an EntityDataSource -- see below: [ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.] System.Reflection.RuntimeModule.GetTypes(RuntimeModule module) +0 System.Reflection.Assembly.GetTypes() +144 System.Data.Metadata.Edm.ObjectItemConventionAssemblyLoader.LoadTypesFromAssembly() +45 System.Data.Metadata.Edm.ObjectItemAssemblyLoader.Load() +34 System.Data.Metadata.Edm.AssemblyCache.LoadAssembly(Assembly assembly, Boolean loadReferencedAssemblies, ObjectItemLoadingSessionData loadingData) +130 System.Data.Metadata.Edm.AssemblyCache.LoadAssembly(Assembly assembly, Boolean loadReferencedAssemblies, KnownAssembliesSet knownAssemblies, EdmItemCollection edmItemCollection, Action`1 logLoadMessage, Object& loaderCookie, Dictionary`2& typesInLoading, List`1& errors) +248 System.Data.Metadata.Edm.ObjectItemCollection.LoadAssemblyFromCache(ObjectItemCollection objectItemCollection, Assembly assembly, Boolean loadReferencedAssemblies, EdmItemCollection edmItemCollection, Action`1 logLoadMessage) +580 System.Data.Metadata.Edm.ObjectItemCollection.ExplicitLoadFromAssembly(Assembly assembly, EdmItemCollection edmItemCollection, Action`1 logLoadMessage) +193 System.Data.Metadata.Edm.MetadataWorkspace.ExplicitLoadFromAssembly(Assembly assembly, ObjectItemCollection collection, Action`1 logLoadMessage) +140 System.Web.UI.WebControls.EntityDataSourceView.ConstructContext() +756 System.Web.UI.WebControls.EntityDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +147 This is a bug filed for the same (or similar) problem: http://connect.microsoft.com/VisualStudio/feedback/details/541962/unable-to-load-one-or-more-of-the-requested-types-connected-with-entitydatasource Question: Has anyone seen this and have advice? I've tried copy-local on all the references... Works just fine on my dev machine. Works on the server until the application pool worker process recycles. I'm building in release mode, but experience the same result when I build for debug. I'm stumped.

  Read the article

• Radeon HD4850 serious issues when using DirectX 10

  - by ricsmania

  Hello, I have a problem with my video card. Whenever I run a DirectX 10 game, it works for a few seconds (10 or so) and then starts displaying nothing but big polygons. I have tested this with Crysis and Resident Evil 5, both have the same problems. The same games running under DirectX 9 work fine, except for some small black squares once in a while. I have the following specs: Asus P7P55D LE Intel Core i5 750 Sapphire Radeon HD4850 1GB 2x2GB Patriot Viper II Sector 5, DDR3 1600 MHz OCZ Stealth X Stream 500SXS 500W At first I thought it could be the video card overheating (it has stock cooling), but the game crashes even when it's running at 50 degrees C, and it's never been higher than 70. I also thought it could be the PSU, but as far as I know 500W is enough for this computer, especially because I haven't overclocked anything. My OS is Windows 7 X64 and I am using Catalyst 10.10, but I have also tried many older versions with no success. I don't think there is a problem with the card itself, or else it wouldn't run DirectX 9 games I believe. I have spent many hours searching for a solution but I couldn't, so any help is appreciated. Thank you. EDIT: I did some further investigation about the problem, and it seems taspeotis was right, it might be related to memory. I slightly underclocked the memory from 993 to 965 MHz and the problem went away completely. Both the black squares using DirectX 9 and the weird polygons using DirectX 10. I was using RE DirectX 10 Benchmark, as it consistently crashed around the same point, and now I can play the full benchmark with no artifacts at all. Unfortunately, the underclock has an obvious hit in performance. Although it's not critical, it's definitely noticeable. So, if the video memory test software showed no erros, but the card needs an underclock to work, what might be the problem? Temperature? Voltage? By the way, I couldn't find what the default voltage for this card is. And what is a good software to try and increase it? I tried Ati Tray Tools but it has a bug that increases the clock speed dramatically whenever I change something in the Overclock tab, so I'm afraid it might fry my card. Worst case scenario, if I don't find I solution I will try to slightly increase the GPU clock to compensate for the memory clock. Thank you again.

  Read the article

• SSL support with Apache and Proxytunnel

  - by whuppy

  I'm inside a strict corporate environment. https traffic goes out via an internal proxy (for this example it's 10.10.04.33:8443) that's smart enough to block ssh'ing directly to ssh.glakspod.org:443. I can get out via proxytunnel. I set up an apache2 VirtualHost at ssh.glakspod.org:443 thus: ServerAdmin [email protected] ServerName ssh.glakspod.org <!-- Proxy Section --> <!-- Used in conjunction with ProxyTunnel --> <!-- proxytunnel -q -p 10.10.04.33:8443 -r ssh.glakspod.org:443 -d %host:%port --> ProxyRequests on ProxyVia on AllowCONNECT 22 <Proxy *> Order deny,allow Deny from all Allow from 74.101 </Proxy> So far so good: I hit the Apache proxy with a CONNECT and then PuTTY and my ssh server shake hands and I'm off to the races. There are, however, two problems with this setup: The internal proxy server can sniff my CONNECT request and also see that an SSH handshake is taking place. I want the entire connection between my desktop and ssh.glakspod.org:443 to look like HTTPS traffic no matter how closely the internal proxy inspects it. I can't get the VirtualHost to be a regular https site while proxying. I'd like the proxy to coexist with something like this: SSLEngine on SSLProxyEngine on SSLCertificateFile /path/to/ca/samapache.crt SSLCertificateKeyFile /path/to/ca/samapache.key SSLCACertificateFile /path/to/ca/ca.crt DocumentRoot /mnt/wallabee/www/html <Directory /mnt/wallabee/www/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> <!-- Need a valid client cert to get into the sanctum --> <Directory /mnt/wallabee/www/html/sanctum> SSLVerifyClient require SSLOptions +FakeBasicAuth +ExportCertData SSLVerifyDepth 1 </Directory> So my question is: How to I enable SSL support on the ssh.glakspod.org:443 VirtualHost that will work with ProxyTunnel? I've tried various combinations of proxytunnel's -e, -E, and -X flags without any luck. The only lead I've found is Apache Bug No. 29744, but I haven't been able to find a patch that will install cleanly on Ubuntu Jaunty's Apache version 2.2.11-2ubuntu2.6. Thanks in advance.

  Read the article

• Thunderbird 3: can't change column width?

  - by rumtscho

  I recently installed Thunderbird 3.0.3. Just noticed a suboptimal UI setting: in the upper pane, which lists the e-mails in the current folder, the Date column is about 200px wide. So when I keep the window at 480x600, all I see in a row is: | tree icon | favourites icon | attachment icon | read icon | junk icon | Date and time, followed by 5cm whitespace | ... | P Where "P" is the first letter of the name of the sender. And the "..." is actually shown this way, I have no idea which column it is meant to be. But I don't see neither the sender, nor the message subject, which makes scrolling a folder for a certain mail rather pointless. I see these when I maximize the window, actually the columns are then not only bigger, they are arranged in another sequence. But I feel that holding a mail client permanently maximised at 1600x1200 is a waste of screen real estate. My naive solution attempt was to try to go with the mouse cursor to the right edge of the date column and try to shrink it by moving the cursor left while holding down the left mouse button. Not only is this default behaviour for all resizable columns I've ever encountered in GUIs, the cursor actually turns into a horizontal double-headed arrow. But pulling has no effect at all. I cannot make a wide column narrow, and I cannot make the narrow columns wide. I didn't find anything in the preferences either. So can please somebody explain how to get the columns arranged sensibly? Edit: I found out that I only have the problem when I drag the Thunderbird window to a GridMove screen area. It gets automatically resized, but doesn't notice the resize event or something, so the column width remains the same as under a maximized window. First making the window narrow using the mouse helps with column width, but the width of the mail pane is still too wide (rows don't reflow). Anyway, this seems to be a bug caused by the combination of the two applications and not a configuration problem, so I guess I'll have to live with it.

  Read the article

• Mysql innoDB corruption after server crash

  - by Ward Loockx

  Yesterday my server died because an outage in the data center. Today it's back up, but having some problems with mysql. First of all my mysql server was not able to start. For this reason I deleted the files ib_logfile0 and ib_logfile1 in /var/lib/mysql folder (I still have the old failing files). After this my server was able to startup again. But now I see a lot of issues in the mysql log file. Sep 1 09:43:55 * mysqld: 120901 9:43:55 InnoDB: Error: page 70944 log sequence number 8 1483471899 Sep 1 09:43:55 * mysqld: InnoDB: is in the future! Current system log sequence number 5 612394935. Sep 1 09:43:55 * mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 09:43:55 * mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 09:43:55 * mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html When I check the docs on mysql.com, I found that I need to recover my database with backups. I have a backup but not sure what's the good way on importing it. Or is there a way to recover without having to re-import the database again? So if I'm correct I need to put innodb_force_recovery to 4 in mysql and delete all current data and re-import? Is there a way to do this without having downtime? I also have one slave running. This slave has the current status now: Last_Error: Relay log read failure: Could not parse relay log event entry. The possible reasons are: the master's binary log is corrupted (you can check this by running 'mysqlbinlog' on the binary log), the slave's relay log is corrupted (you can check this by running 'mysqlbinlog' on the relay log), a network problem, or a bug in the master's or slave's MySQL code. If you want to check the master's binary log or slave's relay log, you will be able to know their names by issuing 'SHOW SLAVE STATUS' on this slave. How can I totally reset the slave after the new import on the master has happend? Hopefully we can find a solution without not to much downtime. Thanks!

  Read the article

• VMware server 2.0 SYN/ACK repeating issues

  - by user65579

  VMWare Server 2.0.0 Build 122956 I am having some issues with connecting into a guest VM (Ubuntu linux 4.4.3-4 lucid) running under VMware 2.0 on a windows server host. All connections to and from the VM's work fine, except for FTP. I thought the issue was the FTP daemon at first but it has been ruled out that it is not the daemon or the server itself. When you try to connect to the FTP server from outside of the host OS it fails with a "421 Service not available" but when you try and connect from the local VM or from the host OS the connection goes through fine. I have ran many packet sniffs using wireshark/tcpdump from the VM, the host OS, and the client connecting, the most informative is the host OS. I have attached a PNG of the relavant packets that were captured. I viewed some other network traffic that was sniffed (WWW specifically) and it seems to do the same syn/ack repeating but the user doesnt see any issues. I have disabled the firewall and the issues persisits, I have tried with specific allow rules to ensure the data is allowed and no changes. It appears like VMware attempts to do the ICMP redirect and it works, but then it vmware repeats the packets sent so you get 3 syn/ack's for every one syn from the client. Also VMWare appears to be attempting to establish an FTP connection between the HOST OS and the GUEST OS, because I see the second SYN sent from the HOST OS to the GUEST to initiate a new connection, and it get the appropriate SYN/ACK followed by an ACK, but the client never sees any of this from its end. EG. syn from client syn/ack from host OS to client syn/ack from guest OS to client syn/ack from host OS to client The same thing happens when the connection reset is attempted, RST's start being sent and repeated, the server responds with a valid header to continue the FTP handshake but the RST acknowledgement is allready issued and things are closed. I am not 100% if this is a bug in VMware or possibly a VMNetwork missconfiguration. Does anyone have any thoughts on where exactly the issue could be, things to try to verify or rule out? I have linked to a picture of the relevant packets sniffed from the host OS. http://img18.imageshack.us/img18/7789/vmwareftpconnection.jpg

  Read the article

• Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

  - by blaineh

  I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

  Read the article

• Ubuntu and Postfix Configuration Issues

  - by Obi Hill

  I recently installed postfix on Ubuntu Natty. I'm having a problem with the configuration. Firstly here is my postfix configuration file: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = $myorigin myhostname = mail.nairanode.com alias_maps = hash:/etc/postfix/aliases alias_database = hash:/etc/postfix/aliases # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this is for the mailbox location for each user virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf # and this is for aliases virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf # and this is for domain lookups virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf # this is how to connect to the domains (all virtual, but the option is there) # not used yet # transport_maps = mysql:/etc/postfix/mysql_transport.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 mydestination = $myorigin, $myhostname, localhost.localdomain, , localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all #mynetworks_style = host # ADDITIONAL unknown_local_recipient_reject_code = 550 maximal_queue_lifetime = 7d minimal_backoff_time = 1000s maximal_backoff_time = 8000s smtp_helo_timeout = 60s smtpd_recipient_limit = 16 smtpd_soft_error_limit = 3 smtpd_hard_error_limit = 12 # Requirements for the HELO statement smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit # Requirements for the sender details smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_$ # Requirements for the connecting server smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.n$ # Requirement for the recipient address smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_do$ # require proper helo at connections smtpd_helo_required = yes # waste spammers time before rejecting them smtpd_delay_reject = yes disable_vrfy_command = yes Here is also my /etc/postfix/aliases: # See man 5 aliases for format postmaster: root Here is also my /etc/mailname: nairanode.com I've also updated my hostname to nairanode.com However, when I run postalias /etc/postfix/aliases I get the following : postalias: warning: valid_hostname: invalid character 47(decimal): /etc/mailname postalias: fatal: file /etc/postfix/main.cf: parameter mydomain: bad parameter value: /etc/mailname Is there something I'm doing wrong?! I noticed that when I replace myorigin = /etc/mailname with myorigin = nairanode.com in my postfix config, I don't see any errors anymore after calling postalias. Is this a bug or something?!

  Read the article

• Looking for a new, free firewall (Sunbelt has a huge hole)

  - by Jason

  I've been using Sunbelt Personal Firewall v. 4.5 (previously Kerio). I've discovered that blocking Firefox connections in the configuration doesn't stop EXISTING Firefox connections. (See my post here yesterday http://superuser.com/questions/132625/sunbelt-firewall-4-5-wont-block-firefox) The "stop all traffic" may work on existing connections - but I'm done testing, as I need to be able to be selective, at any time. I was using the free version, so the "web filtering" option quit working after some time (mostly blocking ads and popups), but I didn't use that anyway. I used the last free version of Kerio before finally having to go to Sunbelt, because Kerio had an unfixed bug where you'd eventually get the BSOD and have to reset Kerio's configuration and start over (configure everything again). So I'm looking for a new Firewall. I don't like ZoneAlarm at all (no offense to all it's users that may be here - personal taste). I need the following: (Sunbelt has all these, except *) - 1. Be able to block in/out to localhost (trusted)/internet selectively for each application with a click (so there's 4 click boxes for each application) [*that effects everything immediately, regardless of what's already connected]. When a new application attempts a connection, you get an allow/deny/remember windows. - 2. Be able to easily set up filter rules for 'individual application'/'all applications,' by protocol, port/address (range), local, remote, in, out. [*Adding a filter rule also doesn't block existing connections in Sunbelt. That needs to work too.] - 3. Have an easy-to-get-to way to "stop all traffic" (like a right click option on the running icon in the task bar). - 4. Be able to set trusted/internet in/out block/allowed (4 things per item) for each of IGMP, ping, DNS, DHCP, VPN, and broadcasts. - 5. Define locahost as trusted/untrusted, define adapter connections as trusted/untrusted. - 6. Block incoming connetions during boot-up and shutdown. - 7. Show existing connections, including local & remote ip/port, protocol, current speed, total bytes transferred, and local ports opened for Listening. - 8. An Intrusion Prevention System which blocks (optionally select each one) known intrustions (long list). - 9. Block/allow applications from starting other applications (deny/allow/remember window). Wish list: A way of knowing what svchost.exe is doing - who is actually using it/calling it. I allowed it for localhost, and selectively allowed it for internet each time the allow/deny window came up. Thanks for any help/suggestions. (I'm using Windows XP SP3.)

  Read the article

• Why won't my Windows 8 Command line update its path

  - by mawcsco

  I needed to add a new entry to my PATH variable. This is a common activity for me in my job, but I've recently started using Windows 8. I assumed the process would be similar to Windows 7, Vista, XP... Here's my sequence of events: Open System properties (Start- [type "Control Panel"] - Control Panel\System and Security\System - Advanced system settings - Environment Variables) Add the new path to beginning of my USER PATH variable (C:\dev\Java\apache-ant-1.8.4\bin;) Opened a command prompt (Start - [type "command prompt" enter] - [type "path" enter] My new path entry is not available (see attached image and vide). I Duplicated the exact same process on a Windows 7 machine and it worked. EDIT Windows 8 Environment Variables and Command Prompt video EDIT This is definitely not the behavior of Windows 7. Watch this video to see the behavior I expect working in Windows 7. http://youtu.be/95JXY5X0fII EDIT 5/31/2013 So, after much frustration, I wrote a small C# app to test the WM_SETTINGCHANGE event. This code receives the event in both Windows 7 and Windows 8. However, in Windows 8 on my system, I do not get the correct path; but, I do in Windows 7. This could not be reproduced in other Windows 8 systems. Here is the C# code. using System; using Microsoft.Win32; public sealed class App { static void Main() { SystemEvents.UserPreferenceChanging += new UserPreferenceChangingEventHandler(OnUserPreferenceChanging); Console.WriteLine("Waiting for system events."); Console.WriteLine("Press <Enter> to exit."); Console.ReadLine(); } static void OnUserPreferenceChanging(object sender, UserPreferenceChangingEventArgs e) { Console.WriteLine("The user preference is changing. Category={0}", e.Category); Console.WriteLine("path={0}", System.Environment.GetEnvironmentVariable("PATH")); } } OnUserPreferenceChanging is equivalent to WM_SETTINGCHANGE C# program running in Windows 7 (you can see the event come through and it picks up the correct path). C# program running in Windows 8 (you can see the event come through, but the wrong path). There is something about my environment that is precipitating this problem. However, is this a Windows 8 bug?

  Read the article

• A proper way to create non-interactive accounts?

  - by AndreyT

  In order to use password-protected file sharing in a basic home network I want to create a number of non-interactive user accounts on a Windows 8 Pro machine in addition to the existing set of interactive accounts. The users that corresponds to those extra accounts will not use this machine interactively, so I don't want their accounts to be available for logon and I don't want their names to appear on welcome screen. In older versions of Windows Pro (up to Windows 7) I did this by first creating the accounts as members of "Users" group, and then including them into "Deny logon locally" list in Local Security Policy settings. This always had the desired effect. However, my question is whether this is the right/best way to do it. The reason I'm asking is that even though this method works in Windows 8 Pro as well, it has one little quirk: interactive users from "User" group are still able to see these extra user names when they go to the Metro screen and hit their own user name in the top-right corner (i.e. open "Sign out/Lock" menu). The command list that drops out contains "Sign out" and "Lock" commands as well as the names of other users (for "switch user" functionality). For some reason that list includes the extra users from "Deny logon locally" list. It is interesting to note that this happens when the current user belongs to "Users" group, but it does not happen when the current user is from "Administrators". For example, let's say I have three accounts on the machine: "Administrator" (from "Administrators", can logon locally), "A" (from "Users", can logon locally), "B" (from "Users", denied logon locally). When "Administrator" is logged in, he can only see user "A" listed in his Metro "Sign out/Lock" menu, i.e. all works as it should. But when user "A" is logged in, he can see both "Administrator" and user "B" in his "Sign out/Lock" menu. Expectedly, in the above example trying to switch from user "A" to user "B" by hitting "B" in the menu does not work: Windows jumps to welcome screen that lists only "Administrator" and "A". Anyway, on the surface this appears to be an interface-level bug in Windows 8. However, I'm wondering if going through "Deny logon locally" setting is the right way to do it in Windows 8. Is there any other way to create a hidden non-interactive user account?

  Read the article

• Mobile enabled web apps with ASP.NET MVC 3 and jQuery Mobile

  - by shiju

  In my previous blog posts, I have demonstrated a simple web app using ASP.NET MVC 3 and EF Code First. In this post, I will be focus on making this application for mobile devices. A single web site will be used for both mobile browsers and desktop browsers. If users are accessing the web app from mobile browsers, users will be redirect to mobile specific pages and will get normal pages if users are accessing from desktop browsers. In this demo app, the mobile specific pages are maintained in an ASP.NET MVC Area named Mobile and mobile users will be redirect to MVC Area Mobile. Let’s add a new area named Mobile to the ASP.NET MVC app. For adding Area, right click the ASP.NET MVC project and  select Area from Add option. Our mobile specific pages using jQuery Mobile will be maintained in the Mobile Area. ASP.NET MVC Global filter for redirecting mobile visitors to Mobile area Let’s add an ASP.NET MVC Global filter for redirecting mobile visitors to Mobile area. The below Global filter is taken from the sample app http://aspnetmobilesamples.codeplex.com/ created by the ASP.NET team. The below filer will redirect the Mobile visitors to an ASP.NET MVC Area Mobile. public class RedirectMobileDevicesToMobileAreaAttribute : AuthorizeAttribute     {         protected override bool AuthorizeCore(System.Web.HttpContextBase httpContext)         {             // Only redirect on the first request in a session             if (!httpContext.Session.IsNewSession)                 return true;               // Don't redirect non-mobile browsers             if (!httpContext.Request.Browser.IsMobileDevice)                 return true;               // Don't redirect requests for the Mobile area             if (Regex.IsMatch(httpContext.Request.Url.PathAndQuery, "/Mobile($|/)"))                 return true;               return false;         }           protected override void HandleUnauthorizedRequest(AuthorizationContext filterContext)         {             var redirectionRouteValues = GetRedirectionRouteValues(filterContext.RequestContext);             filterContext.Result = new RedirectToRouteResult(redirectionRouteValues);         }           // Override this method if you want to customize the controller/action/parameters to which         // mobile users would be redirected. This lets you redirect users to the mobile equivalent         // of whatever resource they originally requested.         protected virtual RouteValueDictionary GetRedirectionRouteValues(RequestContext requestContext)         {             return new RouteValueDictionary(new { area = "Mobile", controller = "Home", action = "Index" });         }     } Let’s add the global filer RedirectMobileDevicesToMobileAreaAttribute to the global filter collection in the Application_Start() of Global.asax.cs file   GlobalFilters.Filters.Add(new RedirectMobileDevicesToMobileAreaAttribute(), 1); Now your mobile visitors will be redirect to the Mobile area. But the browser detection logic in the RedirectMobileDevicesToMobileAreaAttribute filter will not be working in some modern browsers and some conditions. But the good news is that ASP.NET’s browser detection feature is extensible and will be greatly working with the open source framework 51Degrees.mobi. 51Degrees.mobi is a Browser Capabilities Provider that will be working with ASP.NET’s Request.Browser and will provide more accurate and detailed information. For more details visit the documentation page at http://51degrees.codeplex.com/documentation. Let’s add a reference to 51Degrees.mobi library using NuGet We can easily add the 51Degrees.mobi from NuGet and this will update the web.config for necessary configuartions. Mobile Web App using jQuery Mobile Framework jQuery Mobile Framework is built on top of jQuery that provides top-of-the-line JavaScript in a unified User Interface that works across the most-used smartphone web browsers and tablet form factors. It provides an easy way to develop user interfaces for mobile web apps. The current version of the framework is jQuery Mobile Alpha 3. We need to include the following files to use jQuery Mobile. The jQuery Mobile CSS file (jquery.mobile-1.0a3.min.css) The jQuery library (jquery-1.5.min.js) The jQuery Mobile library (jquery.mobile-1.0a3.min.js) Let’s add the required jQuery files directly from jQuery CDN . You can download the files and host them on your own server. jQuery Mobile page structure The basic jQuery Mobile page structure is given below <!DOCTYPE html> <html>   <head>   <title>Page Title</title>   <link rel="stylesheet" href="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a1.min.css" />   <script src="http://code.jquery.com/jquery-1.5.min.js"></script>   <script src="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a3.min.js"></script> </head> <body> <div data-role="page">   <div data-role="header">     <h1>Page Title</h1>   </div>   <div data-role="content">     <p>Page content goes here.</p>      </div>   <div data-role="footer">     <h4>Page Footer</h4>   </div> </div> </body> </html> The data- attributes are the new feature of HTML5 so that jQuery Mobile will be working on browsers that supporting HTML 5. You can get a detailed browser support details from http://jquerymobile.com/gbs/ . In the Head section we have included the Core jQuery javascript file and jQuery Mobile Library and the core CSS Library for the UI Element Styling. These jQuery files are minified versions and will improve the performance of page load on Mobile Devices. The jQuery Mobile pages are identified with an element with the data-role="page" attribute inside the <body> tag. <div data-role="page"> </div> Within the "page" container, any valid HTML markup can be used, but for typical pages in jQuery Mobile, the immediate children of a "page" are div element with data-roles of "header", "content", and "footer". <div data-role="page">     <div data-role="header">...</div>     <div data-role="content">...</div>     <div data-role="footer">...</div> </div> The div data-role="content" holds the main content of the HTML page and will be used for making user interaction elements. The div data-role="header" is header part of the page and div data-role="footer" is the footer part of the page. Creating Mobile specific pages in the Mobile Area Let’s create Layout page for our Mobile area <!DOCTYPE html> <html> <head>     <title>@ViewBag.Title</title>     <link rel="stylesheet" href="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a3.min.css" />     <script src="http://code.jquery.com/jquery-1.5.min.js"></script>     <script src="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a3.min.js"></script>     </head>      <body> @RenderBody()    </body> </html> In the Layout page, I have given reference to jQuery Mobile JavaScript files and the CSS file. Let’s add an Index view page Index.chtml @{     ViewBag.Title = "Index"; } <div data-role="page"> <div data-role="header">      <h1>Expense Tracker Mobile</h1> </div> <div data-role="content">   <ul data-role="listview">     <li>@Html.Partial("_LogOnPartial")</li>      <li>@Html.ActionLink("Home", "Index", "Home")</li>      <li>@Html.ActionLink("Category", "Index", "Category")</li>                          <li>@Html.ActionLink("Expense", "Index", "Expense")</li> </ul> </div> <div data-role="footer">           Shiju Varghese | <a href="http://weblogs.asp.net/shijuvarghese">Blog     </a> | <a href="http://twitter.com/shijucv">Twitter</a>   </div> </div>   In the Index page, we have used data-role “listview” for showing our content as List View Let’s create a data entry screen create.cshtml @model MyFinance.Domain.Category @{     ViewBag.Title = "Create Category"; }   <div data-role="page"> <div data-role="header">      <h1>Create Category</h1>             @Html.ActionLink("Home", "Index","Home",null, new { @class = "ui-btn-right" })      </div>       <div data-role="content">     @using (Html.BeginForm("Create","Category",FormMethod.Post))     {       <div data-role="fieldcontain">        @Html.LabelFor(model => model.Name)        @Html.EditorFor(model => model.Name)        <div>           @Html.ValidationMessageFor(m => m.Name)        </div>         </div>         <div data-role="fieldcontain">         @Html.LabelFor(model => model.Description)         @Html.EditorFor(model => model.Description)                   </div>                    <div class="ui-body ui-body-b">         <button type="submit" data-role="button" data-theme="b">Save</button>       </div>     }        </div> </div>   In jQuery Mobile, the form elements should be placed inside the data-role="fieldcontain" The below screen shots show the pages rendered in mobile browser Index Page Create Page Source Code You can download the source code from http://efmvc.codeplex.com   Summary We have created a single  web app for desktop browsers and mobile browsers. If a user access the site from desktop browsers, users will get normal web pages and get mobile specific pages if users access from mobile browsers. If users are accessing the website from mobile devices, we will redirect to a ASP.NET MVC area Mobile. For redirecting to the Mobile area, we have used a Global filer for the redirection logic and used open source framework 51Degrees.mobi for the better support for mobile browser detection. In the Mobile area, we have created the pages using jQuery Mobile and users will get mobile friendly web pages. We can create great mobile web apps using ASP.NET MVC  and jQuery Mobile Framework.

  Read the article

• LWJGL - Eclipse error [on hold]

  - by Zarkopafilis

  When I try to run my lwjgl project, an error pops . Here is the log file: # A fatal error has been detected by the Java Runtime Environment: # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d8fcc0a, pid=5612, tid=900 # JRE version: 6.0_16-b01 Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode windows-x86 ) Problematic frame: V [jvm.dll+0xfcc0a] # If you would like to submit a bug report, please visit: http://java.sun.com/webapps/bugreport/crash.jsp # --------------- T H R E A D --------------- Current thread (0x016b9000): JavaThread "main" [_thread_in_vm, id=900, stack(0x00160000,0x001b0000)] siginfo: ExceptionCode=0xc0000005, reading address 0x00000000 Registers: EAX=0x00000000, EBX=0x00000000, ECX=0x00000006, EDX=0x00000000 ESP=0x001af4d4, EBP=0x001af524, ESI=0x016b9000, EDI=0x016b9110 EIP=0x6d8fcc0a, EFLAGS=0x00010246 Top of Stack: (sp=0x001af4d4) 0x001af4d4: 6da44bd8 016b9110 00000000 001af668 0x001af4e4: ffffffff 22200000 001af620 76ec39c2 0x001af4f4: 001af524 6d801086 0000000b 001afd34 0x001af504: 016b9000 016dd990 016b9000 00000000 0x001af514: 001af5f4 6d9ee000 6d9ef2f0 ffffffff 0x001af524: 001af58c 10008c85 016b9110 00000000 0x001af534: 00000000 000a0554 00000000 00000024 0x001af544: 00000000 00000000 001af6ac 00000000 Instructions: (pc=0x6d8fcc0a) 0x6d8fcbfa: e8 e8 d0 1d 08 00 8b 45 10 c7 45 d8 0b 00 00 00 0x6d8fcc0a: 8b 00 8b 48 08 0f b7 51 26 8b 40 0c 8b 4c 90 20 Stack: [0x00160000,0x001b0000], sp=0x001af4d4, free space=317k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) V [jvm.dll+0xfcc0a] C [lwjgl.dll+0x8c85] C [USER32.dll+0x18876] C [USER32.dll+0x170f4] C [USER32.dll+0x1119e] C [ntdll.dll+0x460ce] C [USER32.dll+0x10e29] C [USER32.dll+0x10e84] C [lwjgl.dll+0x1cf0] j org.lwjgl.opengl.WindowsDisplay.createWindow(Lorg/lwjgl/opengl/DrawableLWJGL;Lorg/lwjgl/opengl/DisplayMode;Ljava/awt/Canvas;II)V+102 j org.lwjgl.opengl.Display.createWindow()V+71 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;Lorg/lwjgl/opengl/Drawable;Lorg/lwjgl/opengl/ContextAttribs;)V+72 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;)V+12 j org.lwjgl.opengl.Display.create()V+7 j zarkopafilis.koding.io.javafx.Main.main([Ljava/lang/String;)V+16 v ~StubRoutines::call_stub V [jvm.dll+0xecf9c] V [jvm.dll+0x1741e1] V [jvm.dll+0xed01d] V [jvm.dll+0xf5be5] V [jvm.dll+0xfd83d] C [javaw.exe+0x2155] C [javaw.exe+0x833e] C [kernel32.dll+0x51154] C [ntdll.dll+0x5b2b9] C [ntdll.dll+0x5b28c] Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j org.lwjgl.opengl.WindowsDisplay.nCreateWindow(IIIIZZJ)J+0 j org.lwjgl.opengl.WindowsDisplay.createWindow(Lorg/lwjgl/opengl/DrawableLWJGL;Lorg/lwjgl/opengl/DisplayMode;Ljava/awt/Canvas;II)V+102 j org.lwjgl.opengl.Display.createWindow()V+71 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;Lorg/lwjgl/opengl/Drawable;Lorg/lwjgl/opengl/ContextAttribs;)V+72 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;)V+12 j org.lwjgl.opengl.Display.create()V+7 j zarkopafilis.koding.io.javafx.Main.main([Ljava/lang/String;)V+16 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( = current thread ) 0x0179a400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4460, stack(0x0b900000,0x0b950000)] 0x01795400 JavaThread "CompilerThread0" daemon [_thread_blocked, id=5264, stack(0x0b8b0000,0x0b900000)] 0x01790c00 JavaThread "Attach Listener" daemon [_thread_blocked, id=6080, stack(0x0b860000,0x0b8b0000)] 0x01786400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1204, stack(0x0b810000,0x0b860000)] 0x01759c00 JavaThread "Finalizer" daemon [_thread_blocked, id=5772, stack(0x0b7c0000,0x0b810000)] 0x01755000 JavaThread "Reference Handler" daemon [_thread_blocked, id=4696, stack(0x01640000,0x01690000)] =0x016b9000 JavaThread "main" [_thread_in_vm, id=900, stack(0x00160000,0x001b0000)] Other Threads: 0x01751c00 VMThread [stack: 0x015f0000,0x01640000] [id=4052] 0x0179c800 WatcherThread [stack: 0x0b950000,0x0b9a0000] [id=3340] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 960K, used 816K [0x037c0000, 0x038c0000, 0x03ca0000) eden space 896K, 91% used [0x037c0000, 0x0388c2c0, 0x038a0000) from space 64K, 0% used [0x038a0000, 0x038a0000, 0x038b0000) to space 64K, 0% used [0x038b0000, 0x038b0000, 0x038c0000) tenured generation total 4096K, used 0K [0x03ca0000, 0x040a0000, 0x077c0000) the space 4096K, 0% used [0x03ca0000, 0x03ca0000, 0x03ca0200, 0x040a0000) compacting perm gen total 12288K, used 2143K [0x077c0000, 0x083c0000, 0x0b7c0000) the space 12288K, 17% used [0x077c0000, 0x079d7e38, 0x079d8000, 0x083c0000) No shared spaces configured. Dynamic libraries: 0x00400000 - 0x00424000 C:\Program Files\Java\jre6\bin\javaw.exe 0x77550000 - 0x7768e000 C:\Windows\SYSTEM32\ntdll.dll 0x75a80000 - 0x75b54000 C:\Windows\system32\kernel32.dll 0x758d0000 - 0x7591b000 C:\Windows\system32\KERNELBASE.dll 0x759e0000 - 0x75a80000 C:\Windows\system32\ADVAPI32.dll 0x76070000 - 0x7611c000 C:\Windows\system32\msvcrt.dll 0x77250000 - 0x77269000 C:\Windows\SYSTEM32\sechost.dll 0x771a0000 - 0x77241000 C:\Windows\system32\RPCRT4.dll 0x76eb0000 - 0x76f79000 C:\Windows\system32\USER32.dll 0x76e60000 - 0x76eae000 C:\Windows\system32\GDI32.dll 0x77770000 - 0x7777a000 C:\Windows\system32\LPK.dll 0x75fd0000 - 0x7606e000 C:\Windows\system32\USP10.dll 0x770b0000 - 0x770cf000 C:\Windows\system32\IMM32.DLL 0x770d0000 - 0x7719c000 C:\Windows\system32\MSCTF.dll 0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll 0x6d800000 - 0x6da8b000 C:\Program Files\Java\jre6\bin\client\jvm.dll 0x73a00000 - 0x73a32000 C:\Windows\system32\WINMM.dll 0x75610000 - 0x7565b000 C:\Windows\system32\apphelp.dll 0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll 0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll 0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll 0x776e0000 - 0x776e5000 C:\Windows\system32\PSAPI.DLL 0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll 0x10000000 - 0x1004c000 C:\Users\theo\Desktop\workspace\JavaFX1\lib\natives\windows\lwjgl.dll 0x5d170000 - 0x5d238000 C:\Windows\system32\OPENGL32.dll 0x6e7b0000 - 0x6e7d2000 C:\Windows\system32\GLU32.dll 0x70620000 - 0x70707000 C:\Windows\system32\DDRAW.dll 0x70610000 - 0x70616000 C:\Windows\system32\DCIMAN32.dll 0x75b60000 - 0x75cfd000 C:\Windows\system32\SETUPAPI.dll 0x759b0000 - 0x759d7000 C:\Windows\system32\CFGMGR32.dll 0x76d70000 - 0x76dff000 C:\Windows\system32\OLEAUT32.dll 0x75db0000 - 0x75f0c000 C:\Windows\system32\ole32.dll 0x758b0000 - 0x758c2000 C:\Windows\system32\DEVOBJ.dll 0x74060000 - 0x74073000 C:\Windows\system32\dwmapi.dll 0x74b60000 - 0x74b69000 C:\Windows\system32\VERSION.dll 0x745f0000 - 0x7478e000 C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_420fe3fa2b8113bd\COMCTL32.dll 0x75d50000 - 0x75da7000 C:\Windows\system32\SHLWAPI.dll 0x74370000 - 0x743b0000 C:\Windows\system32\uxtheme.dll 0x22200000 - 0x22206000 C:\Program Files\ESET\ESET Smart Security\eplgHooks.dll VM Arguments: jvm_args: -Djava.library.path=C:\Users\theo\Desktop\workspace\JavaFX1\lib\natives\windows -Dfile.encoding=Cp1253 java_command: zarkopafilis.koding.io.javafx.Main Launcher Type: SUN_STANDARD Environment Variables: PATH=C:/Program Files/Java/jre6/bin/client;C:/Program Files/Java/jre6/bin;C:/Program Files/Java/jre6/lib/i386;C:\Perl\site\bin;C:\Perl\bin;C:\Ruby200\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Windows Live\Shared;C:\Users\theo\Desktop\eclipse; USERNAME=theo OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 6 Model 37 Stepping 5, GenuineIntel --------------- S Y S T E M --------------- OS: Windows 7 Build 7600 CPU:total 4 (8 cores per cpu, 2 threads per core) family 6 model 37 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, ht Memory: 4k page, physical 2097151k(1257972k free), swap 4194303k(4194303k free) vm_info: Java HotSpot(TM) Client VM (14.2-b01) for windows-x86 JRE (1.6.0_16-b01), built on Jul 31 2009 11:26:58 by "java_re" with MS VC++ 7.1 time: Wed Oct 23 22:00:12 2013 elapsed time: 0 seconds Code: Display.setDisplayMode(new DisplayMode(800,600)); Display.create();//Error here I am using JDK 6

  Read the article

• Ask How-To Geek: Dropbox in the Start Menu, Understanding Symlinks, and Ripping TV Series DVDs

  - by Jason Fitzpatrick

  This week we take a look at how to incorporate Dropbox into your Windows Start Menu, understanding and using symbolic links, and how to rip your TV series DVDs right to unique and high-quality episode files. Once a week we dip into our reader mailbag and help readers solve their problems, sharing the useful solutions with you in the process. Read on to see our fixes for this week’s reader dilemmas. Add Drobox to Your Start Menu Dear How-To Geek, I use Dropbox all the time and would like to add it right onto my start menu along side the other major shortcuts like Documents, Pictures, etc. It seems like adding Dropbox into the menu should be part of the Dropbox installation package! Sincerely, Dropboxing in Des Moines Dear Dropboxing, We agree, it would be a nice installation option. As it stands you’re going to have to do a little simple hacking to get Dropbox nestled neatly into your start menu. The hack isn’t super elegant but when you’re done you’ll have the link you want and it’ll look like it was there all along. Check out this step-by-step guide here in order to take an existing Library shortcut and rework it to be a Dropbox link. Understanding and Using Symbolic Links Dear How-To Geek, I was talking to a coworker the other day about an issue I’d been having with a media center application I’m running. He suggested using symbolic links to better organize my media and make it easier for the application to access my collection. I had no idea what he was talking about and never got a chance to bug him about it later. Can you clear up this whole symbolic links business for me? I’ve been using computers for years and I’ve never even heard of it! Sincerely, Symbolic Who? Dear Symbolic, Symbolic links aren’t commonly used by many Windows users which is why you likely haven’t run into the concept. Symbolic links are essentially supercharged shortcuts—the newly introduced Windows library system is really just a type of symbolic link system. You can use symbolic links to do all sorts of neat stuff like link folders to your Dropbox folder, organize media, and more. The concept of symbolic links is pretty simple but the execution can be really tricky. We’d suggest reading over our guide to creating symbolic links in Windows 7, Windows XP, and Ubunutu to get a clearer idea what you’re getting into. Rip Your TV DVDs into Handy Episode Files Dear How-To Geek, My wife got me an iPod for Christmas and I still haven’t got around to filling it up. I have tons of entire TV show seasons on DVD and would like to get them on the iPod but I have absolutely no idea where to start. How do I get the shows off the discs? I thought it would be as easy to import the TV shows into iTunes as it is to import tracks off a CD but I was totally wrong. I tried downloading some applications to rip them but those didn’t work at all. Very frustrating! Surely there is an easy and/or automated way to do this, right? Sincerely, Free My DVDs Dear DVDs, Oh man is this a frustration we can relate to. It’s inordinately difficult to get movies and TV shows off physical media and into digital (and portable media player-friendly) formats. There are a multitude of ways to rip DVDs and quite a few applications out there (some good, some mediocre, and some outright malware). We’d recommend a two-part punch to solve your ripping woes. You’ll need a copy of DVDFab to strip away the protections on the discs and rip the disc and Handbrake to load the disc image and convert the files. It’s not quite as smooth as the CD-to-iTunes workflow but it’s still pretty easy. Check out all the steps and settings you’ll want to toggle here. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines Google’s New Personal Blocklist Extension Kills Search Engine Spam KeyCounter Tracks Your Keystrokes and Mouse Clicks Add Custom LED Ambient Lighting to Your PC or Media Center The Trackor Monitors Amazon Prices; Integrates with Chrome, Firefox, and Safari Four Awesome TRON Legacy Themes for Chrome and Iron Anger is Illogical – Old School Style Instructional Video [Star Trek Mashup]

  Read the article

< Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >