Search Results

Search found 29554 results on 1183 pages for 'human computer interface'.

Page 238/1183 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >

• Ping Access to a Nested VM !! Plz Help

  - by Shivaramakrishnan

  I have a problem in communication between the host and the nested VM.This is my layout. I have installed KVM on host machine having a single nic interface (public ip) running Ubuntu.On top of this,I have VM running Ubuntu.I have installed KVM in this VM too.I then have a VM inside this running a web server. I am able to ping the host from this web server VM and ssh into it.But from host to VM ,ping is being unsuccessful. The VM (named L1hyp) on host was created using libvirt-manager and has IP of 192.168.122.8. The vswitch interface created at host is in default config (NAT-ed). Its IP is 192.168.122.1. Now this VM is also having a vswitch interface which is in default config (NAT-ed).Its IP is 192.168.100.1. The Web server VM is created on top of this L1hyp VM, is having an IP of 192.168.100.186. The Webserver VM uses 192.168.100.1 as its default gw. The L1hyp uses 192.168.122.1 as its default gw. From Host: ping 192.168.122.8 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS ping 192.168.100.1 - SUCCEEDS ping 192.168.100.186 - FAILS Comes up with Destination Host Unreachable From 192.168.122.1. But there is route to 192.168.100.0/24 subnet from host.Ping to 192.168.100.1 succeeds. From Webserver VM: ping 192.168.100.1 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS SSH from web server VM to host succeeds. Can anyone help me out what needs to be modified to have two way communication between the host and Webserver VM at the earliest? I am pondering over this problem for over a week now.

  Read the article

• Dell inspiron not finding Vodafone router

  - by Jeggy

  I have a "Dell inspiron 1564" and ubuntu doesn't find my friends router it works great at home, he has a vodafone router jeggy@jeggy-XPS:~$ sudo lshw -C network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: 78:e4:00:2a:d1:eb width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f0200000-f0203fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: b8:ac:6f:67:32:52 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:f0410000-f0410fff memory:f0400000-f040ffff memory:f0420000-f043ffff *-network description: Ethernet interface physical id: 4 logical name: ham0 serial: 7a:79:05:ff:3e:ec size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.255.62.236 link=yes multicast=yes port=twisted pair speed=10Mbit/s

  Read the article

• Design pattern for an automated mechanical test bench

  - by JJS

  Background I have a test fixture with a number of communication/data acquisition devices on it that is used as an end of line test for a product. Because of all the various sensors used in the bench and the need to run the test procedure in near real-time, I'm having a hard time structuring the program to be more friendly to modify later on. For example, a National Instruments USB data acquisition device is used to control an analog output (load) and monitor an analog input (current), a digital scale with a serial data interface measures position, an air pressure gauge with a different serial data interface, and the product is interfaced through a proprietary DLL that handles its own serial communication. The hard part The "real-time" aspect of the program is my biggest tripping point. For example, I need to time how long the product needs to go from position 0 to position 10,000 to the tenth of a second. While it's traveling, I need to ramp up an output of the NI DAQ when it reaches position 6,000 and ramp it down when it reaches position 8,000. This sort of control looks easy from browsing NI's LabVIEW docs but I'm stuck with C# for now. All external communication is done by polling which makes for lots of annoying loops. I've slapped together a loose Producer Consumer model where the Producer thread loops through reading the sensors and sets the outputs. The Consumer thread executes functions containing timed loops that poll the Producer for current data and execute movement commands as required. The UI thread polls both threads for updating some gauges indicating current test progress. Unsure where to start Is there a more appropriate pattern for this type of application? Are there any good resources for writing control loops in software (non-LabVIEW) that interface with external sensors and whatnot?

  Read the article

• my web cam not working prperly in skype 12.04

  - by elvin

  oller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 01) This is the configuration of my web cam when i typed lspci in terminal; how do i find out what type of cam it is. the command letters i wrote here may be wrong.never mind i wrote from my memory.my web cam shows green colour shade and no proper colour.pls help me to fix this problem.2nd option- if i buy microsoft web cam will the image will get corrected.i think my web cam is hyundai electronics make.

  Read the article

• How can I get started using TDD to code some simple functionality?

  - by Gabriel

  I basically have the gist of TDD. I'm sold that it's useful and I've got a reasonable command of the MSTEST framework. However, to date I have not been able to graduate to using it as a primary development method. Mostly, I use it as a surrogate for writing console apps as test drivers (my traditional approach). The most useful thing about it for me is the way it absorbs the role of regression testing. I have not yet built anything yet that specifically isolates various testable behaviors, which is another big part of the picture I know. So this question is to ask for pointers on what the first test(s) I might write for the following development task: I want to produce code that encapsulates task execution in the fashion of producer/consumer. I stopped and decided to write this question after I wrote this code (wondering if I could actually use TDD for real this time) Code: interface ITask { Guid TaskId { get; } bool IsComplete { get; } bool IsFailed { get; } bool IsRunning { get; } } interface ITaskContainer { Guid AddTask(ICommand action); } interface ICommand { string CommandName { get; } Dictionary<string, object> Parameters { get; } void Execute(); }

  Read the article

• Interview Questions in OOP

  - by Fero

  Hi all, I faced the below interview questions in OOP under PHP language. Kindly clear my clarifications regarding this. I am very confused. As i am a beginner to OOP i got too confused. Could anyone clarify these things clearly? Difference between Abstract class and interface. Interviewer : Let us consider abstract class contains three abstract methods such as a,b,c and interface contains three methods a,b,c. In this case these do the same functionality. Then why are going for abstract and why are we going for interface. Me : ? static keyword. Interviewer: We call static method without creating object by using scope resolution operator in PHP. As well as we can able to call concrete methods also. Then what is need of static keyword there? Me : .... final keyword. Interviewer: Give me any scenario of using final keyword. Me : For db connection related method Interviewer: Other than that? Me: ... Constructor. Interviewer: What is the use of constructor? Me : There is no need for object to access this. It will call automatically when the class calls. Interviewer: Other than that? Me : .... Thanks in advance...

  Read the article

• whats the name of this pattern?

  - by Wes

  I see this a lot in frameworks. You have a master class which other classes register with. The master class then decides which of the registered classes to delegate the request to. An example based passed in class may be something this. public interface Processor { public boolean canHandle(Object objectToHandle); public void handle(Object objectToHandle); } public class EvenNumberProcessor extends Processor { public boolean canHandle(Object objectToHandle) { if (!isNumeric(objectToHandle)){ return false } return isEven(objectToHandle); } public void handle(objectToHandle) { //Optionally call canHandleAgain to ensure the calling class is fufilling its contract doSomething(); } } public class OddNumberProcessor extends Processor { public boolean canHandle(Object objectToHandle) { if (!isNumeric(objectToHandle)){ return false } return isOdd(objectToHandle); } public void handle(objectToHandle) { //Optionally call canHandleAgain to ensure the calling class is fufilling its contract doSomething(); } } //Can optionally implement processor interface public class processorDelegator { private List processors; public void addProcessor(Processor processor) { processors.add(processor); } public void process(Object objectToProcess) { //Lookup relevant processor either by keeping a list of what they can process //Or query each one to see if it can process the object. chosenProcessor=chooseProcessor(objectToProcess); chosenProcessor.handle(objectToProcess); } } Note there are a few variations I see on this. In one variation the sub classes provide a list of things they can process which the ProcessorDelegator understands. The other variation which is listed above in fake code is where each is queried in turn. This is similar to chain of command but I don't think its the same as chain of command means that the processor needs to pass to other processors. The other variation is where the ProcessorDelegator itself implements the interface which means you can get trees of ProcessorDelegators which specialise further. In the above example you could have a numeric processor delegator which delegates to an even/odd processor and a string processordelegator which delegates to different strings. My question is does this pattern have a name.

  Read the article

• design for supporting entities with images

  - by brainydexter

  I have multiple entities like Hotels, Destination Cities etc which can contain images. The way I have my system setup right now is, I think of all the images belonging to this universal set (a table in the DB contains filePaths to all the images). When I have to add an image to an entity, I see if the entity exists in this universal set of images. If it exists, attach the reference to this image, else create a new image. E.g.: class ImageEntityHibernateDAO { public void addImageToEntity(IContainImage entity, String filePath, String title, String altText) { ImageEntity image = this.getImage(filePath); if (image == null) image = new ImageEntity(filePath, title, altText); getSession().beginTransaction(); entity.getImages().add(image); getSession().getTransaction().commit(); } } My question is: Earlier I had to write this code for each entity (and each entity would have a Set collection). So, instead of re-writing the same code, I created the following interface: public interface IContainImage { Set<ImageEntity> getImages(); } Entities which have image collections also implements IContainImage interface. Now, for any entity that needs to support adding Image functionality, all I have to invoke from the DAO looks something like this: // in DestinationDAO::addImageToDestination { imageDao.addImageToEntity(destination, imageFileName, imageTitle, imageAltText); // in HotelDAO::addImageToHotel { imageDao.addImageToEntity(hotel, imageFileName, imageTitle, imageAltText); It'd be great help if someone can provide me some critique on this design ? Are there any serious flaws that I'm not seeing right away ?

  Read the article

• Can higher-order functions in FP be interpreted as some kind of dependency injection?

  - by Giorgio

  According to this article, in object-oriented programming / design dependency injection involves a dependent consumer, a declaration of a component's dependencies, defined as interface contracts, an injector that creates instances of classes that implement a given dependency interface on request. Let us now consider a higher-order function in a functional programming language, e.g. the Haskell function filter :: (a -> Bool) -> [a] -> [a] from Data.List. This function transforms a list into another list and, in order to perform its job, it uses (consumes) an external predicate function that must be provided by its caller, e.g. the expression filter (\x -> (mod x 2) == 0) [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] selects all even numbers from the input list. But isn't this construction very similar to the pattern illustrated above, where the filter function is the dependent consumer, the signature (a -> Bool) of the function argument is the interface contract, the expression that uses the higher-order is the injector that, in this particular case, injects the implementation (\x -> (mod x 2) == 0) of the contract. More in general, can one relate higher-order functions and their usage pattern in functional programming to the dependency injection pattern in object-oriented languages? Or in the inverse direction, can dependency injection be compared to using some kind of higher-order function?

  Read the article

• I'm applying for a position at a startup. To whom should I address my cover letter?

  - by sapphiremirage

  One of the co-founders answered questions about the company when the job was posted, but I feel like I shouldn't assume that he's the one who is in charge of hiring. Since it's relatively new and has a lot of name overlap with other things already on the web, it's hard to find any information about the company online, much less the name of their hiring manager. I'm not even certain that they do have a hiring manager, since I seem to remember that they are just an 8 person team. I've heard that "To whom it may concern" is tacky, and normally I would say something along the lines of "Dear Head of Human Resources", but that clearly doesn't work in this case. Any idea what my salutation should be? Later Edits: Final Version: To Joe Programmer and/or the AwesomeStartup.com hiring team, (+ a few words in first paragraph explaining why I am addressing Joe Programmer) I've already sent the email, so nothing you say here will save me. However, feel free to comment on my decision if you think your words be useful to future generations. Old Version (left here because some people responded to it): To the hiring manager for internships at Awesomestartup.com, Additionally, because so many people made comments about the content of my letter: I did spent several hours writing the cover letter itself and making sure that it was awesome. After spending such a long time working on the important part, I asked this question because I wanted to make sure that it wouldn't get passed over by some human who was having a bad day and decided that my salutation was inappropriate. Not likely when the most likely reader of that email is a programmer type, I know, but I figured that it wouldn't hurt not to be sloppy.

  Read the article

• Why the clip space in OpenGL has 4 dimensions?

  - by user827992

  I will use this as a generic reference, but the more i browser online docs and books, the less i understand about this. const float vertexPositions[] = { 0.75f, 0.75f, 0.0f, 1.0f, 0.75f, -0.75f, 0.0f, 1.0f, -0.75f, -0.75f, 0.0f, 1.0f, }; in this online book there is an example about how to draw the first and classic hello world for OpenGL about making a triangle. The vertex structure for the triangle is declared as stated in the code above. The book, as all the other sources about this, stress the point that the Clip Space is a 4D structure that is used to basically decide what will be rasterized and rendered to the screen. Here I have my questions: i can't imagine something in 4D, i don't think that a human can do that, what is a 4D for this Clip space ? the most human-readable doc that i have read speaks about a camera, which is just an abstraction over the clipping concept, and i get that, the problem is, why not using the concept of a camera in the first place which is a more familiar 3D structure? The only problem with the concept of a camera is that you need to define the prospective in other way and so you basically have to add another statement about what kind of camera you wish to have. How i'm supposed to read this 0.75f, 0.75f, 0.0f, 1.0f ? All i get is that they are all float values and i get the meaning of the first 3 values, what does it mean the last one?

  Read the article

• How to squeeze the maximum performance out of Unity and GNOME 3?

  - by melvincv

  I see that I do not get good performance with the new Unity desktop, but I should say that Unity has improved a lot since the last edition Ubuntu 11.10. How to squeeze the maximum performance out of 1. Unity 2. GNOME 3 My system specs: -Processors- Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz -Memory- Total Memory : 2049996 kB -PCI Devices- Host bridge : Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) PCI bridge : Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) (prog-if 00 [Normal decode]) VGA compatible controller : Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) (prog-if 00 [VGA controller]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) PCI bridge : Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) ISA bridge : Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) IDE interface : Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) IDE interface : Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) SMBus : Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Ethernet controller : Intel Corporation PRO/100 VE Network Connection (rev 01)

  Read the article

• wireless card not detected

  - by user281219

  i have a old HP Compaq NX6125 with a new lunbuntu 14.04 32 bits install , but the wireless card is not working I have already done this steps and the wireless leds on the laptop are on but can't see any where the wireless interface , cloud`t do the last two steps . sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer b43-fwcutter Then Reboot And you need to activate the card from settings/network/wireless make it ON After this search for wireless icon at the task bar and look for your wifi. lshw -class network: *-network:0 description: Ethernet interface product: NetXtreme BCM5788 Gigabit Ethernet vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:02:01.0 logical name: eth0 version: 03 serial: 00:0f:b0:f7:d1:0f size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.134 duplex=full firmware=5788-v3.26 ip=192.168.1.120 latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:23 memory:d0000000-d000ffff *-network:1 description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:22 memory:d0010000-d0011fff *-network description: Wireless interface physical id: 1 logical name: wlan2 serial: 00:14:a5:77:9e:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.13.0-29-generic firmware=666.2 link=no multicast=yes wireless=IEEE 802.11bg

  Read the article

• Android From Local DB (DAO) to Server sync (JSON) - Design issue

  - by Taiko

  I sync data between my local DB and a Server. I'm looking for the cleanest way to modelise all of this. I have a com.something.db package That contains a Data Helper and couple of DAO classes that represents objects stored in the db (I didn't write that part) com.something.db --public DataHelper --public Employee @DatabaseField e.g. "name" will be an actual column name in the DB -name @DatabaseField -salary etc... (all in all 50 fields) I have a com.something.sync package That contains all the implementation detail on how to send data to the server. It boils down to a ConnectionManager that is fed by different classes that implements a 'Request' interface com.something.sync --public interface ConnectionManager --package ConnectionManagerImpl --public interface Request --package LoginRequest --package GetEmployeesRequest My issue is, at some point in the sync process, I have to JSONise and de-JSONise my data (E.g. the Employee class). But I really don't feel like having the same Employee class be responsible for both his JSONisation and his actual representation inside the local database. It really doesn't feel right, because I carefully decoupled the rest, I am only stuck on this JSON thing. What should I do ? Should I write 3 Employee classes ? EmployeeDB @DatabaseField e.g. "name" will be an actual column name in the DB -name @DatabaseField -salary -etc... 50 fields EmployeeInterface -getName -getSalary -etc... 50 fields EmployeeJSON -JSON_KEY_NAME = "name" The JSON key happens to be the same as the table name, but it isn't requirement -name -JSON_KEY_SALARY = "salary" -salary -etc... 50 fields It feels like a lot of duplicates. Is there a common pattern I can use there ?

  Read the article

• Oracle is Child&rsquo;s Play&hellip;in NSW

  - by divya.malik

  A few weeks ago, my colleague Michael Seback posted a blog entry on Oracle’s acquisition of Haley.  We recently read  an interesting report from Down Under, and here was our press release on the  implementation of Oracle’s Policy automation software in New South Wales, which I thought I would share. We always love hearing about our software “at work”, and especially in the Public Sector- social services area, where it makes a big difference to people’s lives. Here were some of the reasons, why NSW chose Oracle software: “One of the things Oracle’s Policy Automation system is good at is allowing you take decision  trees and rules that are obviously written in English and code them up using very much a natural language approach,” said Holling (CIO for Human Services). “So it was quite a short process to translate the final set of rules that were written on paper into business rules that were actually embedded in the system.” “Another reason why we chose Oracle’s Automation tool is because with future versions of Siebel it comes very tightly integrated with that. It allows us to then to basically take the results of the Policy Automation survey and actually populate our client management system database with that information,” said Holling. As per Surend Dayal, North America VP, Oracle’s Policy automation has applications across a wide range of industries, including public sector—especially health and human services—also financial services, insurance, and even airline rewards programs. In other words, any business process that requires consistent, accurate decision-making where complex legislation and/or internal policies are involved. Click here to read more about Oracle and Haley.

  Read the article

• Fusion HCM in Boots

  - by Kristin Rose

  These boots are made for walking, and that’s just what they’ll do…Of course by boots, we’re referring to Oracle’s HCM Boot Camps for OPN members, which offer a hands-on approach to learning about Oracle Fusion HCM and Taleo positioning and capabilities. Those who attend an Oracle HCM boot camp will be prepared to achieve Oracle Fusion HCM Presales Specialist status, discuss Oracle Fusion HCM with customers to build pipeline, and complete competency criteria toward Oracle Fusion HCM 11g Specialization! This in-person event offers expert-led sessions, discussion, and hands-on activities meaning you will get the information quicker and remember it better! Plus, we think a free lunch is always a good thing. As a next step, all interested partners should: Obtain self-service knowledge from the Oracle Fusion Human Capital Management 11g PreSales Specialist Guided Learning Path. Become a Specialist by completing the Oracle Fusion Human Capital Management 11g PreSales Specialist Assessment . Contact their regional Oracle Alliances & Channels point-of-contact to learn more about these free OPN Boot Camp events, and the opportunity to attend the next one. We know you’ll be strutting your stuff after you've gained the knowledge and expertise to become Oracle Fusion HCM Specialized! Check it out! The OPN Communications Team 

  Read the article

• Is there a name for the Builder Pattern where the Builder is implemented via interfaces so certain parameters are required?

  - by Zipper

  So we implemented the builder pattern for most of our domain to help in understandability of what actually being passed to a constructor, and for the normal advantages that a builder gives. The one twist was that we exposed the builder through interfaces so we could chain required functions and unrequired functions to make sure that the correct parameters were passed. I was curious if there was an existing pattern like this. Example below: public class Foo { private int someThing; private int someThing2; private DateTime someThing3; private Foo(Builder builder) { this.someThing = builder.someThing; this.someThing2 = builder.someThing2; this.someThing3 = builder.someThing3; } public static RequiredSomething getBuilder() { return new Builder(); } public interface RequiredSomething { public RequiredDateTime withSomething (int value); } public interface RequiredDateTime { public OptionalParamters withDateTime (DateTime value); } public interface OptionalParamters { public OptionalParamters withSeomthing2 (int value); public Foo Build ();} public static class Builder implements RequiredSomething, RequiredDateTime, OptionalParamters { private int someThing; private int someThing2; private DateTime someThing3; public RequiredDateTime withSomething (int value) {someThing = value; return this;} public OptionalParamters withDateTime (int value) {someThing = value; return this;} public OptionalParamters withSeomthing2 (int value) {someThing = value; return this;} public Foo build(){return new Foo(this);} } } Example of how it's called: Foo foo = Foo.getBuilder().withSomething(1).withDateTime(DateTime.now()).build(); Foo foo2 = Foo.getBuilder().withSomething(1).withDateTime(DateTime.now()).withSomething2(3).build();

  Read the article

• Layers - Logical seperation vs physical

  - by P.Brian.Mackey

  Some programmers recommend logical seperation of layers over physical. For example, given a DL, this means we create a DL namespace not a DL assembly. Benefits include: faster compilation time simpler deployment Faster startup time for your program Less assemblies to reference Im on a small team of 5 devs. We have over 50 assemblies to maintain. IMO this ratio is far from ideal. I prefer an extreme programming approach. Where if 100 assemblies are easier to maintain than 10,000...then 1 assembly must be easier than 100. Given technical limits, we should strive for < 5 assemblies. New assemblies are created out of technical need not layer requirements. Developers are worried for a few reasons. A. People like to work in their own environment so they dont step on eachothers toes. B. Microsoft tends to create new assemblies. E.G. Asp.net has its own DLL, so does winforms. Etc. C. Devs view this drive for a common assembly as a threat. Some team members Have a tendency to change the common layer without regard for how it will impact dependencies. My personal view: I view A. as silos, aka cowboy programming and suggest we implement branching to create isolation. C. First, that is a human problem and we shouldnt create technical work arounds for human behavior. Second, my goal is not to put everything in common. Rather, I want partitions to be made in namespaces not assemblies. Having a shared assembly doesnt make everything common. I want the community to chime in and tell me if Ive gone off my rocker. Is a drive for a single assembly or my viewpoint illogical or otherwise a bad idea?

  Read the article

• Help deciding on language for a complex desktop - web application

  - by user967834

  I'm about to start working on a fairly complex project needing a desktop GUI as well as a web interface and I need to decide on a language(s) to use. This is from an electrical engineering/robotics background. These are the requirements: Program will have to read data from multiple sensors and inputs (motion sensor, temperature sensor, capacitive sensor, infrared, magnetic sensors, etc) through a port on a computer - so either through USB or ethernet. Program will have to be able to send control signals based on this input. Program will have to continuously monitor all input signals at all times - so realtime data. Program will require authentication. Program will need to be controllable from a web interface from anywhere via logging in to a website. Web interface will also need to have realtime feedback once authenticated. What language do you think would best accomplish this? I was thinking maybe saving everything into a database which can be accessed by both the desktop and web app? And would Python be able to do all of this? Or something like a remote desktop app? I know this is a complex project but let's assume I can learn any language. Has anyone done something like this and if so how did you accomplish it?

  Read the article

• Ternary and Artificial Intelligence

  - by user2957844

  Not much of a programmer myself, however I have been thinking about the future of AI. If a fully functional AI is programmed in a binary environment as is used in current computing, would that create a bit of a black and white personality? As in just yes/no, on/off, 1/0? I will use the Skynet computer from the Terminator series as a bad analogy; it is brought online and comes to the conclusion that humanity should just be destroyed so the problem is resolved, basically its only options were; fire the missiles or not. (The films do not really go into what its moves would be after doing such a thing, but that goes into the realms of AI evolution so does not really fit with this question.) It may also have been badly programmed. Now, the human mind has been akin to a ternary system which allows our "out of the box" thinking along with all the other wonderful things our minds can do. So, would it not be more prudent to create a functional ternary system and program an AI using it so the resulting personality would be able to benefit from the third "maybe" (so to speak) option? I understand that in binary there are ways to get around the whole yes/no etc. way of things, however the basic operations are still just 1's and 0's. Again with using the above bad Skynet analogy; if it could have had that third "maybe" option as part of its core system, it may have decided to not launch due to being able to make sense of the intricacies of human nature and the politics of such a move etc. In effect, my question is; Would an AI benefit more from ternary computing as opposed to binary due to the inclusion of -1, or 2, dependent on the system ("maybe," as I call it)?

  Read the article

• "That's cool. But it would be even better if..."

  - by Geertjan

  I recently talked to some NetBeans users who were interested in a demonstration of the features that will be part of NetBeans IDE 7.2. (See the 7.2 New and Noteworthy for the full list.) One of the new features I demonstrated was this one. In an interface declaration, NetBeans IDE 7.2 will provide a hint, as can be seen in the sidebar below: When the lightbulb is clicked, or Alt-Enter is pressed, this will be shown: When the hint is invoked, the user will see this: And then the user will be able to enter the name of a class, and the name of a package, and assuming the defaults above are taken, a class with this content will be generated: package demo; public class WordProcessorImpl implements WordProcessor {     @Override     public String process(String word) {         throw new UnsupportedOperationException("Not supported yet.");     } } When I demonstrated the above, the response from the audience was: "That's cool. But it would be even better if..." it was possible to implement an interface into an existing class. it was possible to select a class and specify the interfaces that it should implement. it was possible, in the context of a NetBeans Platform application, to specify the module where the class should be implemented. So I created some issues: Implement an interface into an existing class http://netbeans.org/bugzilla/show_bug.cgi?id=210804 Select class and specify interfaces to implement http://netbeans.org/bugzilla/show_bug.cgi?id=210805 Allow user to select module for generating implementation http://netbeans.org/bugzilla/show_bug.cgi?id=210807

  Read the article

• Help with design structure choice: Using classes or library of functions

  - by roverred

  So I have GUI Class that will call another class called ImageProcessor that contains a bunch functions that will perform image processing algorithms like edgeDetection, gaussianblur, contourfinding, contour map generations, etc. The GUI passes an image to ImageProcessor, which performs one of those algorithm on it and it returns the image back to the GUI to display. So essentially ImageProcessor is a library of independent image processing functions right now. It is called in the GUI like so Image image = ImageProcessor.EdgeDetection(oldImage); Some of the algorithms procedures require many functions, and some can be done in a single function or even one line. All these functions for the algorithms jam packed into ImageProcessor can be pretty messy, and ImageProcessor doesn't sound it should be a library. So I was thinking about making every algorithm be a class with a shared interface say IAlgorithm. Then I pass the IAlgorithm interface from the GUI to the ImageProcessor. public interface IAlgorithm{ public Image Process(); } public class ImageProcessor{ public Image Process(IAlgorithm TheAlgorithm){ return IAlgorithm.Process(); } } Calling in the GUI like so Image image = ImageProcessor.Process(new EdgeDetection(oldImage)); I think it makes sense in an object point of view, but the problem is I'll end up with some classes that are just one function. What do you think is a better design, or are they both crap and you have a much better idea? Thanks!

  Read the article

• SPARC SuperCluster Papers

  - by user12616590

  Oracle has been publishing white papers that describe uses and characteristics of the SPARC SuperCluster product. Here are just a few: A Technical Overview of the Oracle SPARC SuperCluster T4-4SPARC SuperCluster T4-4 is a high performance, multi-purpose engineered system that has been designed, tested and integrated to run a wide array of enterprise applications. It is well suited for multi-tier enterprise applications with Web, database and application components. This 20-page paper discusses the components and technical characteristics of this product. SPARC SuperCluster T4-4 Platform Security Principles and CapabilitiesThe security capabilities designed into the SPARC SuperCluster, and architectural, deployment, and operational best practices for taking advantage of them. Consolidating Oracle E-Business Suite on Oracle’s SPARC SuperClusterThis Oracle Optimized Solution describes the implementation and use of SPARC SuperCluster as a consolidation platform for E-Business Suite in 30 pages. Oracle Optimized Solution for Oracle PeopleSoft Human Capital Management on SPARC SuperClusterThe Oracle Optimized Solution for PeopleSoft Human Capital Management on SPARC SuperCluster is the industry's only proven, tested, applications-to-disk solution that maintains excellence managing absences, optimizing collaborative activities, streamlining knowledge and honing processes; 31 pages. I hope you find some of those papers useful.

  Read the article

• Help with Abstract Factory Pattern

  - by brazc0re

  I need help with a abstract factory pattern design. This question is a continuation of: Design help with parallel process I am really confused where I should be initializing all of the settings for each type of medium (ex: RS232, TCP/IP, etc). Attached is the drawing on how I am setting up the pattern: As shown, when a medium is created, each medium imposes a ICreateMedium interface. I would assume that the Create() method also create the proper object, such as SerialPort serialPort = new SerialPort("COM1", baud); however, TCPIPMedium would have an issue with the interface because it wouldn't need to initialize a serial port object. I know I am doing something majorly wrong here. I just can't figure it out and have been stuck for a while. What I also get confused on show the interface IMedium will get access to the communication object once it is created so it can write out the appropriate byte[] packet. Any guidance would be greatly appreciated. My main goal is to have the Communicator class spit a packet out without caring which type of medium is active.

  Read the article

• lshw not showing network

  - by triunenature

  Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

  Read the article

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >