Search Results

Search found 10225 results on 409 pages for 'intel syntax'.

Page 238/409 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >

  • Mecer laptop gives me a white screen when I close the screen

    - by Dane Rossenrode
    I'm having a very strange hardware issue with my Mecer m770u laptop with intel i7 quad core, etc... I'm wondering if anyone has had this issue with any other brand/model of laptop, and what I should fix/replace to solve it...? Basically when I close the screen of the laptop, the screen often goes completely white. If I open it slowly and smoothly again, the screen returns to normal. But if I close the screen when the computer is off, and then switch it on, it boots with a white screen, and opening it slowly/smoothly doesn't help. I have to then switch it on and off a few times before it returns to normal. Makes travelling with my laptop really difficult! Any suggestions?

    Read the article

  • PXE in an 802.1X environment

    - by newmanth
    My organization is about to implement 802.1X on our enterprise, but we currently use PXE-based OS deployment sequences in SCCM. I'm looking for a way to continue using PXE in an 802.1X environment. Our infrastructure uses Cisco network gear running at 12.2 (or newer). We are an all Windows network and all clients support 802.1X. All new workstations have Intel AMT available (but not factory configured). In a worst case scenario, we'll use a guest vlan for OSD, but I'd rather have the OSD occur in an authenticated session. I've seen white papers that describe using AMT to act as a supplicant for PXE boot, but can't find any implementation details...

    Read the article

  • Raid0 performance degradation?

    - by davy8
    Not sure if this belongs here or on SuperUser, feel free to move as appropriate. I've noticed the performance on my RAID0 setup seems to have degraded over the past months. The throughput is fine, but I think the random access time has increased or something. In use I generally see about 1-5mb/sec when loading stuff in Visual Studio and other apps and it doesn't seem like the CPU is bottlenecking as the CPU utilization is pretty low. I don't recall what Access Time used to be, but HD Tune is reporting 12.6ms Read throughput is showing as averaging about 125MB/sec so it should be great for sequential reads. Defrag daily and it shows fragmentation levels low, so that shouldn't be an issue. Additional info, Windows 7 x64, Intel raid controller on mobo, WD Black 500GB (I think 32mb cache) x2.

    Read the article

  • TextMate suddenly highlighting all text dark red...?

    - by AP257
    I'm using TextMate on Snow Leopard, don't know much about how it works. After I hit an unknown keyboard shortcut, it suddenly decided to highlight almost all text in my Python files dark red - making all my Python virtually unreadable! I must have accidentally pressed a shortcut - but I've no idea what I did or how to turn it off, and can't find any relevant help in the manual or form. Even just 'turn off all highlighting' would do. Anyone know how to turn this highlighting off? Bit desperate! UPDATE: Figured it out. There's a tiny, tiny dropdown list at the very bottom of every TextMate editing window where you can set the language, so TextMate can highlight invalid syntax - I'd accidentally clicked on it and set the language to something other than Python. Will leave the question up though in case others have the same problem.

    Read the article

  • X locks up with konqueror on comics.com

    - by retracile
    If I browse to comics.com using konqueror under KDE on Fedora 11, X will, after a delay, lock up. The mouse will move, but no keyboard input is recognized, and the screen does not react to the mouse passing over objects on screen. I am able to ssh into the machine and issue shutdown -r now and have that work. The machine is a Dell XPS M1330 with Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c), and Fedora 11 is fully updated. Visiting the same site in Firefox does not cause a lockup. I am booting with nomodeset since it won't boot into X otherwise. I tried the other two accel options: EXA (still locks up) and XAA (X won't start). Any suggestions on how I can debug this? bugzilla

    Read the article

  • Raid0 performance degradation?

    - by davy8
    Not sure if this belongs here or on SuperUser, feel free to move as appropriate. I've noticed the performance on my RAID0 setup seems to have degraded over the past months. The throughput is fine, but I think the random access time has increased or something. In use I generally see about 1-5mb/sec when loading stuff in Visual Studio and other apps and it doesn't seem like the CPU is bottlenecking as the CPU utilization is pretty low. I don't recall what Access Time used to be, but HD Tune is reporting 12.6ms Read throughput is showing as averaging about 125MB/sec so it should be great for sequential reads. Defrag daily and it shows fragmentation levels low, so that shouldn't be an issue. Additional info, Windows 7 x64, Intel raid controller on mobo, WD Black 500GB (I think 32mb cache) x2.

    Read the article

  • Ruby Rails Mongrel Sever failing to serve OXS1.6

    - by Mark V
    Hi there I'm fairly new to Rails and the Mac, and doing my first deploy... I'm trying to set up my rails app on a brand new Apple mini-server running OXS1.6 (Snow Leopard). It is currently running fine on my new iMac i7 (same OS). I start mongrel with this command: mongrel_rails start -e production -p 3000 -d -a 127.0.0.1 --debug And it starts giving this output in the log/mongrel.log ** Daemonized, any open files are closed. Look at log/mongrel.pid and log/mongrel.log for info. ** Starting Mongrel listening at 127.0.0.1:3000 ** Installing debugging prefixed filters. Look in log/mongrel_debug for the files. ** Starting Rails with production environment... /Library/Ruby/Gems/1.8/gems/rails-2.3.5/lib/rails/gem_dependency.rb:119:Warning: Gem::Dependency#version_requirements is deprecated and will be removed on or after August 2010. Use #requirement /Users/danadmin/ServiceApp/ServiceApp/app/helpers/input_grid_manager.rb:9: warning: already initialized constant ID_PREFIX /Users/danadmin/ServiceApp/ServiceApp/app/helpers/input_grid_manager.rb:10: warning: already initialized constant ADD_ID ** Rails loaded. ** Loading any Rails specific GemPlugins ** Signals ready. TERM => stop. USR2 => restart. INT => stop (no restart). ** Rails signals registered. HUP => reload (without restart). It might not work well. ** Mongrel 1.1.5 available at 127.0.0.1:3000 ** Writing PID file to log/mongrel.pid The output is the same on my dev iMac (including the warnings). The difference is that accessing http://127.0.0.1:3000 on my iMac serves up the app's login page. Where as on the mac mini-server accessing the same results in this error 500 text from mongrel: "We're sorry, but something went wrong." It's as if rails is not working. I'm pretty good at figuring things out if I have some log file messages to direct me, but mongrel.log has no error message (the output remains the same as above), and the log/production.log is empty (which makes me think rails has not started?). My gems are all the same versions between machines and so is the app code; and there are no clues I can see in any of the mongrel_debug logs, except that rails.log on the mac mini-server and the iMac are different. After a start and single access, first is the rails.log from the mac mini-server: D, [2010-04-15T13:45:34.870406 #6914] DEBUG -- : TRACING ON Thu Apr 15 13:45:34 +1200 2010 Thu Apr 15 13:46:08 +1200 2010 REQUEST / --- !map:Mongrel::HttpParams SERVER_NAME: 127.0.0.1 HTTP_ACCEPT: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_CACHE_CONTROL: max-age=0 HTTP_HOST: 127.0.0.1:3000 HTTP_USER_AGENT: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_0; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.9 Safari/533.2 REQUEST_PATH: / SERVER_PROTOCOL: HTTP/1.1 HTTP_ACCEPT_LANGUAGE: en-US,en;q=0.8 REMOTE_ADDR: 127.0.0.1 PATH_INFO: / SERVER_SOFTWARE: Mongrel 1.1.5 SCRIPT_NAME: / HTTP_VERSION: HTTP/1.1 REQUEST_URI: / SERVER_PORT: "3000" HTTP_ACCEPT_CHARSET: ISO-8859-1,utf-8;q=0.7,*;q=0.3 REQUEST_METHOD: GET GATEWAY_INTERFACE: CGI/1.2 HTTP_ACCEPT_ENCODING: gzip,deflate,sdch HTTP_CONNECTION: keep-alive While on my iMac it seems the same except for the addition of the HTTP_COOKIE and the HTTP_IF_NONE_MATCH, here is rails.log from my iMac # Logfile created on Thu Apr 15 13:41:42 +1200 2010 by logger.rb/22285 D, [2010-04-15T13:41:42.934088 #2070] DEBUG -- : TRACING ON Thu Apr 15 13:41:42 +1200 2010 Thu Apr 15 13:42:05 +1200 2010 REQUEST / --- !map:Mongrel::HttpParams SERVER_NAME: 127.0.0.1 HTTP_ACCEPT: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_HOST: 127.0.0.1:3000 HTTP_USER_AGENT: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.9 Safari/533.2 REQUEST_PATH: / SERVER_PROTOCOL: HTTP/1.1 HTTP_IF_NONE_MATCH: "\"216cc63ce3c1f286ef8dd4f18f354f6e\"" HTTP_ACCEPT_LANGUAGE: en-US,en;q=0.8 REMOTE_ADDR: 127.0.0.1 PATH_INFO: / SERVER_SOFTWARE: Mongrel 1.1.5 SCRIPT_NAME: / HTTP_COOKIE: _ServiceApp_session=BAh7DDonY3VzdG9tZXJfbGlzdF9maWx0ZXJfam9iX3N0YXR1c19pZGn6Og9zZXNzaW9uX2lkIiU0ZTk1ZWZjMmViMGU3NjE2YzA0NDc2YTkxYzJlNDZiOToaY3VycmVudF9jdXN0b21lcl9uYW1lIilUSEUgQ1VTVE9NRVIgTkFNRSBORUVEUyBUTyBCRSBMT0FERUQ6EF9jc3JmX3Rva2VuIjFuT1JMUWk0NlZrWlM3c2lUN3BaWCs5NkhRajhxYnFwRnhzVHVTWXEvUWY0PToZam9iX2xpc3RfZmlsdGVyX3RleHQiADogam9iX2xpc3RfZmlsdGVyX2VtcGxveWVlX2lkafo6HmN1c3RvbWVyX2xpc3RfZmlsdGVyX3RleHQiAA%3D%3D--d01bc5d0b457ad524d16cb3402b5dfed9afce83d HTTP_VERSION: HTTP/1.1 REQUEST_URI: / SERVER_PORT: "3000" HTTP_ACCEPT_CHARSET: ISO-8859-1,utf-8;q=0.7,*;q=0.3 REQUEST_METHOD: GET GATEWAY_INTERFACE: CGI/1.2 HTTP_ACCEPT_ENCODING: gzip,deflate,sdch HTTP_CONNECTION: keep-alive Any direction or ideas would be greatly appreciated. Thanks.

    Read the article

  • Add multiple @groups to valid users

    - by skids89
    In smb.conf I have the line valid users = @Staff @Directors Is this a valid syntax to add two groups to the valid users line? It does not seem to work right on our xp pro clients. If not which of the following is the proper way (if any) to make two groups valid users of this network drive? Which is proper for windows clients? valid users = +Staff +Directors Or do I need to use the & valid users = &Staff &Directors Or some combo of the two? valid users = &+Staff &+Directors valid users = +&Staff +&Directors

    Read the article

  • Samsung 830 very slow benchmark numbers

    - by alekop
    I just bought a new SSD, and installed a fresh copy of Windows on it. I didn't see any noticeable difference in boot times, app start-up times, so I decided to benchmark it. Asus P7P55D-E Intel i5-760 Samsung 830 256GB SATA III Windows 7 Ultimate 64-bit The Windows experience index gave the drive a 7.3 rating, but real-world performance is not particularly impressive. Any ideas why the numbers are so low? UPDATE: It turns out that SATA III support is turned off by default on the P7P55D motherboard. After enabling it in BIOS (Tools - Level Up), the scores went up: Read Write Seq 325 183 4K 16 49 IOPS 32K 28K It's an improvement, but still far below what they should be for this drive.

    Read the article

  • Video for HTML5 -- ffmpeg commands

    - by StackOverflowNewbie
    I'd like to allow my users to upload their videos (no clue what format they'll be) and convert them into the following formats: MP4 Ogg Webm I think it's those 3 formats I need in order to support HTML5, at least per http://mediaelementjs.com/. I've tried various commands that I found on the web. Some of them worked, some of them used old syntax, some of them worked only on my computer and not others, some of them gave conflicting information, etc. Are there any FFMPEG experts here that can provide the "proper" commands? I'm not particularly trying to achieve anything special. I just want to be able to convert the video into something playable on the web. Highest quality, smallest filesize, etc. are the basic goals. Something that works without a lot of special configurations would be ideal, too. I ran into a lot of "missing presets" problems.

    Read the article

  • 59 vs 60 hertz on external display via DisplayPort

    - by Shiki
    Don't know if this is a really specific question or you'll help me out. Please do. I just bought a DeLock DisplayPort cable for my Lenovo T500. Tried to use it with the in-built Intel MHD4500, no use. With the ATI HD3650 (you can switch between the two vga on this machine) I get a normal picture, but only on 59hz. On 60 I get a smaller desktop size (strange). Any idea what can cause this? Will I have any problem if I use the 59hz? (Was using the display with a VGA cable but I get a blurry picture with that (dont matter what device I attach, VGA is like this on this display) and thats why I wanted to change.)

    Read the article

  • mongoexport csv output array values

    - by 9point6
    I'm using mongoexport to export some collections into CSV files, however when I try to target fields which are members of an array I cannot get it to export correctly. command I'm using: mongoexport -d db -c collection -fieldFile fields.txt --csv > out.csv and the contents of fields.txt is similar to id name address[0].line1 address[0].line2 address[0].city address[0].country address[0].postcode where the BSON data would be: { "id": 1, "name": "example", "address": [ { "line1": "flat 123", "line2": "123 Fake St.", "city": "London", "country": "England", "postcode": "N1 1AA" } ] } what is the correct syntax for exporting the contents of an array?

    Read the article

  • Is there a test to see if hardware virtualization (vmx / xvm) are presently enabled within a Linux session?

    - by Dr. Edward Morbius
    I'm writing procedures for configuring VirtualBox support for 64-bit SMP guests, which requires hardware virtualization suppot (VTx/Intel, AMD-V/AMD). I have successfully configured this myself, however I'd like the procedure to be clear. sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo | egrep -q '(vmx|svm)' && echo Has hardware virt || echo No HW virt ... shows if the CPU is capable. I've still got to go enable the feature in BIOS. Any way to test from within Linux to see that this is no or not? Thanks.

    Read the article

  • Xcopy /exclude does not exclude some of the specified criteria

    - by Richard Z.
    Good afternoon. I want xcopy to copy all files meeting a certain criteria located in the C drive to a specific folder, except ones located in the directories specified in excl.txt. The exclusions only work partially - the files located in %systemroot%, %programfiles% and in each profile's appdata are still copied, even though those directories are listed in excl.txt. How do I make xcopy skip those directories, preferentially still using environment vars to specify the paths? My current syntax is: xcopy /s /c /d /h /i /r /y /g /f /EXCLUDE:excl.txt %systemdrive%\*.doc f:\test\ excl.txt currently contains the following: \%temp%\ \%userprofile%\appdata \%programfiles%\ \%programfiles(x86)%\ \%systemroot%\ \%programdata%\ appdata windows %programfiles% Thank you very much.

    Read the article

  • ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

    - by TecBrat
    The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

    Read the article

  • udev: waiting for uevents to be processed on my Gentoo

    - by stan31337
    During the startup I see machine executing this thing for about 30 seconds: udev: waiting for uevents to be processed Then I get a quick message which says something like: devfs: timeout (50 seconds) I can't see the whole thing because after that system starts up very fast including Xfce. What logs and configs do I need to provide for further investigation? $uname -a Linux genta 3.6.6-gentoo #1 SMP Sun Nov 11 11:02:23 NOVT 2012 i686 Genuine Intel(R) CPU T2300 @ 1.66GHz GenuineIntel GNU/Linux Thank you! UPD: rc-status genta / # rc-status sysinit Runlevel: sysinit dmesg [ started ] udev [ started ] devfs [ started ] genta / # rc-status boot Runlevel: boot hwclock [ started ] modules [ started ] fsck [ started ] root [ started ] mtab [ started ] localmount [ started ] sysctl [ started ] bootmisc [ started ] hostname [ started ] termencoding [ started ] keymaps [ started ] net.lo [ started ] swap [ started ] urandom [ started ] procfs [ started ]

    Read the article

  • GIMP Slow Startup

    - by muntoo
    Is there any way to speed up GIMP's startup time on Windows Vista Home Premium 32-Bit 1.6 [Dual] Intel Processors? On XP [different computer], it loads in less than 3 seconds. On Vista, it takes 20 seconds: 2 Seconds (other - fonts, brushes, etc) 18 Seconds (extension-script-fu) It just freezes at extension-script-fu. Looking at ProcessExplorer (or Task Manager, whatever), I see that it's not taking any CPU. EDIT: it does seem to be taking 50% of the CPU. It gets stuck for about 18 seconds, then starts working again, and the actual GIMP program pops up [...finally]. I have the latest stable version running (I think). I tried it with XP SP2 Compatibiliy mode and/or Run As Administrator, but that didn't help. EDIT: One way would be to disable script-fu. Does anyone know how to disable it at startup? (NOTE: Just wanted to point out that the title and the tags are the same. :D )

    Read the article

  • off-the-shelf HDD in Dell Optiplex 755 - Invalid Replacement - Press F1 when rebooting

    - by Eric Liprandi
    Hi, I recently put an SSD into my work Optiplex 755. Since then, every time the system boots or reboots, I get prompted to hit F1 to continue with a message like HDD replacement is not valid. The system works just fine. What I am gathering from Dell's website is that I left the original drive internally as a data drive. And apparently the Optiplex does not support 2 drives in the configuration we purchased originally and complains. Any suggestions on how to get rid of this message? some suggested the MEBx or whatever from Intel and to turn it off, but I did not succeed earlier. It's not a big deal 80% of the time, but I regularly work from home and occasionally need to fire a reboot and well, you don't get the BIOS screen remotely :) Regards, Eric.

    Read the article

  • Can't find onboard NIC with windows server 2008

    - by Sanarothe
    Hi. I'm trying to setup a windows server, but I can't seem to get it to install ethernet drivers :( motherboard is ms-6743 chipset 82865g/pe/p(intel) The MSI drivers specifically for this motherboard are bad links. Not surprising... MSI is rarely helpful. Sisoft Sandra doesn't see any network devices, and all of my leads to drivers have reported that there is no network adapter to install a driver for. The light is ON on the mobo, the onboard setting in bios is ON and the computer worked just fine with a standard install of windows 7 about a month ago. I don't know what to do :(

    Read the article

  • For virtual machines, when SMP is available on the host, should guest also have SMP setup?

    - by supercheetah
    I'm trying to find out the best "bang for my buck" so to speak in regards to virtual machines, and SMP. I have an Intel Core 2 Duo, which of course has two cores and the VT extensions, and I'm running Ubuntu Linux (host) on it with VirtualBox, which has Windows Vista (guest). Currently I've got the guest machine setup for two processors to give Windows a chance to manage its own parallelism, but I'm not certain that it's any faster. I've tried it with just one processor, but it's hard to tell if it's any better. Any thoughts? Should the guest have two processors setup?

    Read the article

  • Bridge virtual machines out WLAN interface

    - by Thomas
    It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

    Read the article

  • With Monit, how do I restart a process when a directory timestamp check fails?

    - by Alterscape
    In my /etc/monit/monitrc I have the following lines: check process foo_server with pidfile /var/run/bwam_server.pid start program = "/Users/foo/foo_server.sh start" stop program = "/Users/foo/foo_server.sh stop" check directory foo_data path "/Users/foo/Library/Application Support/foo_server/data" if timestamp > 1 minute then alert #if timestamp > 1 minute then restart foo_server I know I shouldn't have some of this stuff in my home directory, but this aside: if I uncomment the last line, Monit tells me syntax error on foo_server -- but I am, as far as I understand, correctly defining the process -- how else do I reference it?

    Read the article

  • Attempting to migrate to Aptana from Dreamweaver - how to?

    - by Kerry
    I have been using Dreamweaver for years, and have used Dreamweaver MX, Dreamweaver MX 2004, Dreamweaver 8 & Dreamweaver CS4. They all carry a common theme and were relatively easy to migrate to each other. I use, however, very few features of dreamweaver. Specifically: Syntax highlighting Telesense FTP management/site management The search/replace The idea I get from Aptana is its much more geared toward the web development/programmer side of things, have better visualizations of classes, etc., and handle everything else just as well. The problem is it is not at all clear to me. I managed to start a new project, but it didn't associate it with an FTP. So, I created an FTP, and it looks like I can have many FTPs for one project. My question then is, is there a tutorial or guide to migrating to Aptana from a Dreamweavor's perspective?

    Read the article

  • problems with Apache on Snow Leopard

    - by Hristo
    I kind of screwed up the Apache "stuff" on my Mac. Usually when I visit http://localhost/, I would see the "It Works!" but now it just lists the directory and files inside /Library/WebServer/Documents. When I try to stop/start/restart the server with sudo apachectl stop, I get: httpd: Syntax error on line 68 of /etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_disk_cache.so into server: dlopen(/usr/libexec/apache2/mod_disk_cache.so, 10): Symbol not found: _apr_file_info_get$INODE64\n Referenced from: /usr/libexec/apache2/mod_disk_cache.so\n Expected in: flat namespace\n in /usr/libexec/apache2/mod_disk_cache.so I don't want to do the MacPorts install, I tried it earlier but... I just want to do it via source code with the usual ./configure, make, make install. Any ideas on how to get this working? Is there a way to totally remove Apache and then reinstall a fresh version? Thanks, Hristo

    Read the article

  • problems with Apache on Snow Leopard

    - by Hristo
    I kind of screwed up the Apache "stuff" on my Mac. Usually when I visit http://localhost/, I would see the "It Works!" but now it just lists the directory and files inside /Library/WebServer/Documents. When I try to stop/start/restart the server with sudo apachectl stop, I get: httpd: Syntax error on line 68 of /etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_disk_cache.so into server: dlopen(/usr/libexec/apache2/mod_disk_cache.so, 10): Symbol not found: _apr_file_info_get$INODE64\n Referenced from: /usr/libexec/apache2/mod_disk_cache.so\n Expected in: flat namespace\n in /usr/libexec/apache2/mod_disk_cache.so I don't want to do the MacPorts install, I tried it earlier but... I just want to do it via source code with the usual ./configure, make, make install. Any ideas on how to get this working? Is there a way to totally remove Apache and then reinstall a fresh version? Thanks, Hristo

    Read the article

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >