Search Results

Search found 36650 results on 1466 pages for 'random access'.

Page 239/1466 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

• What could be causing Windows to randomnly reset the system time to a random time?

  - by Jonathan Dumaine

  My Windows 7 machine infuriates me. It cannot hold a date. At one point it all worked fine, but now it will decide that it needs to change the system time to a random time and date either in the future or past. There seems to be no correlation or set interval of when it happens. To remedy it I have: Correctly set the time in bios. Replaced the motherboard battery with a new CR2032 (even checked it with a multimeter). Tried disabling automatic internet synchronizing via "Date and Time" dialog. Stopped, restarted, left disabled the Windows Time service. Yet with all of these actions, the time will continue to change. Any ideas?

  Read the article

• Random BSODs on Win7 boot. Can't find a valid reason.

  - by 0plus1

  Hi, I bought and assembled a new pc: ASUS m4a785td-v EVO AMD x4 620 OCZ Black Edition 2x 2gb WD 500gb sata Win7 Ultimate 64bit fresh install BSOD on boot. Formatted, reinstalled, BSOD on install. Ran memtest - no errors. Ran Win7 install in safe mode. Installed, random BSOD on win7 startup, even in safe mode. Updated BIOS. Ran the win7 memtest (no error), booted after some tries and ran Prime95 blend test for 12 hours straight with no errors at all! When the pc has booted, win7 runs as smooth as possible, I've been playing STALKER for 4 hours straight with not a single hiccup. Using Blue Screen View I can see that every BSOD involves: ntoskrnl.exe Here are the dumps Any help would be greatly appreciated, this thing is driving me crazy.

  Read the article

• What could be causing Windows to randomly reset the system time to a random time?

  - by Jonathan Dumaine

  My Windows 7 machine infuriates me. It cannot hold a date. At one point it all worked fine, but now it will decide that it needs to change the system time to a random time and date, either in the future or past. There seems to be no correlation or set interval of when it happens. In attempt to remedy this, I have: Correctly set the time in BIOS. Replaced the motherboard battery with a new CR2032 (even checked it with a multimeter). Tried disabling automatic internet synchronizing via "Date and Time" dialog. Stopped, restarted, left disabled the Windows Time service. Yet with all of these actions, the time will continue to change. Any ideas?

  Read the article

• Apache crashing at random intervals. Can not find a reason in log files

  - by Nick Downton

  We are having an issue with a VPS running plesk 9.5 on ubuntu 8.04 At seemingly random intervals Apache will disappear and needs to be started manually. I have checked the apache error log, /var/log/messages, individual virtual host apache error files and cannot find anything that coincides with the time of the failure. dmesg is empty which is a bit odd. We have also had the psa service go down for no apparent reason but apache stay up. I'm at a loss to diagnose this really because all the log files I can find do not point to any issues. Are there any others I can look at? Memory usage sits at about 55% (out of 400mb) and it isn't a particularly high trafficed server. Any pointers as to where else I can find out what is going on would be very much appreciated. Nick

  Read the article

• is it okay to use random URLs instead of passwords?

  - by stew

  Is it considered "safe" to use URL constructed from random characters like this? http://example.com/EU3uc654/Photos I'd like to put some files/picture galleries on a webserver that are only to be accessed by a small group of users. My main concern is that the files should not get picked up by search-engines or curious power-users that poke around my site. I've set up an .htaccess file, just to notice that clicking on http://user:pass@url/ links doesn't work well with some browsers/email clients, prompting dialogs and warnings messages that confuse my not-too-computer-savy users.

  Read the article

• What are these completely random images that pop up when using Recuva?

  - by Qubert

  I just used Recuva to get back some photos I accidentally deleted on C:, but I also noticed there's a bunch of COMPLETELY random images in the list of recoverable files I can choose from. An example would be, There are images with names like John_Doe.jpg with a file path somewhere out of C:/Windows/Assembly/ And some of these things don't even make sense, there's one called componentsSpriteImage with the path C:/?/Images that shows a "poster" from the TV series Gold Rush. I am completely lost on this.. I know the OS is on C:, but I can't really think of a reason why Microsoft would leave a image hanging around from Gold Rush.

  Read the article

• How can I access one desktop session from another on the same machine?

  - by d3vid

  I want to run a desktop session as user A, and from that session access a different desktop session as user B. This way I can test, screencast or share my screen from session B, while having access to apps/resources in session A that I do not want running/visible in session B. What application can I do this with? I assume some kind of a remote desktop client/server is what I'm looking for. So far I have tried: VNC. Logged in as user A and user B. In session B run Desktop Sharing. Switched to session A. Tried to access share with Remmina. Failed. (Can get image to appear but it's frozen.) x2go. Installed server and client from stable PPA (needed a workaround for installation to succeed). Created a connection which starts then fails instantly. Discovered mailing list post suggesting that accessing localhost is not supported. On the non-remote front: VirtualBox. Created a minimal virtual machine for session B. Too resource heavy. Am I attempting the impossible? Should I be looking for something other than a remote desktop tool?

  Read the article

• How do I access shared folders on Ubuntu server from Mac OS?

  - by Stephen

  I have an old dell desktop running ubuntu 11.04, I also have samba installed on it. I'm trying to access the shared folders on the Ubuntu machine from my Mac, so I go into 'Finder', click on 'Go' and 'Connect to Server'. I type in the ip address of the ubuntu machine smb://xxx.xxx.x.xx and click connect, I can then see the list of shared folders from the ubuntu machine so I know its making a connection. But when I access the 'Music' folder I get an error message stating: There was an error connecting to the server "xxx.xxx.x.xx". Check the server name or IP address, and try again. Any thoughts anyone ? EDIT I have a external hard drive attached to the server, and the folders I'm trying to access are located on that external hard drive. The location of the folder is /media/HD-CELU2/test, so I think the path from Finder should be smb://xxx.xxx.x.xx/media/HD-CELU2/test, but having tested this, I'm still not getting in. P.S. I'm using Samba as I have a Windows machine on my home network as well.

  Read the article

• Cannot access personal website from home IP. More details inside.

  - by GX67

  This is a recent problem I've been having. My site can be accessed from almost everywhere else except from my home IP, where I do most of my editing/updating, etc. I've tested my connection from my school's network, a friend's connection from out of state (multiple states), and through a tethered connection with my friend's Android. It works in all those cases, both viewing, accessing the cPanel, and using FTP. Here's the problem that happens to me when I try to view it from my home IP: The page times out in Firefox, IE, and Chrome. Using the cmd, I ran tracert and ping, both as failed attempts. Log here. downforeveryoneorjustme.com says my site is up. So do the other site checkers. I can't access my cPanel or FTP accounts. I can't access the host site. (I use perfectz.info for hosting, and I can't access their site either.) System settings: No firewall enabled. Ports are seemingly properly forwarded. (e.g. The ports are open in the router settings, and are open everywhere else.) I have an email forwarder set up from the cPanel that works just fine. (i.e. I can receive emails sent to that address. If any other information is needed, I'll do my best to provide it. UPDATE @ilhan: I use two things: 1) The site cPanel from in-browser. 2) Dreamweaver CS5 FTP. @Matthias: I tested both, and it passes the dual stack with a 10/10. What should I do then?

  Read the article

• What is an effective way to convert a shared memory-mapped system to another data access model?

  - by Rob Jones

  I have a code base that is designed around shared memory. Each process that needs to access the memory maps it into its own address space. The data structures in the shared memory are directly accessed, that is, there is no API. For example: Assume the following: typedef struct { int x; int y; struct { int a; int b; } z; } myStruct; myStruct s; Then a process might access this structure as: myStruct *s = mapGlobalMem(); And use it as: int tmpX = s->x; The majority of the information in the global structure is configuration information that is set once and read many times. I would like to store this information in a database and develop an API to access the database. The problem is, these references are sprinkled throughout the code. I need a way to parse the code and identify global structure references that will need to be refactored. I've looked into using ANTLR to create a parser that will identify references to a small set of structures and enter them into a custom symbol table. I could then use this symbol table to identify which source files need to be refactored. It looks like a promising approach. What other approaches are there? Of course, I'm looking for a programmatic approach. There are far too many source files to examine each one visually. This is all ordinary ANSI C. Nothing else.

  Read the article

• What credentials should I use to access a Windows share?

  - by JMCF125

  H
  i, I have installed Samba and CIFS and all that, followed a bunch of tutorials, but still I can't access a share in the separate Windows 7 machine. Before I could access a share in Ubuntu from Windows, but although now I can't for whatever reason; the error of the attempt to mount the Windows share is the same: 13, asking for credentials (the computer with Windows is off now, but I can add the exact error message later). In /etc/fstab I have: # ... (help info) ... # <file system> <mount point> <type> <options> <dump> <pass> # ... (mounting points that don't matter for the question) ... //192.168.1.2/C\:/Users/Public/Documents /srv/Z\:/ cifs user=guest,password=,uid=1000,iocharset=utf8 0 0 I also tried options such as username=guest,uid=1000,iocharset=utf8 and guest,uid=1000,iocharset=utf8, which, of course, don't work. What user am I supposed to use? (user=user; username=user; my credentials in the Windows and Ubuntu machines do not work, at least with the syntax I tried - similar to this). Even if this worked it's not actually what I want. I wanted to setup an authentication for any one trying to access the drive (it's currently 777, for the Linux share as well) and put a limit/quota on the share's use (as I see Z:on Windows, it allows for the entire C:drive to be filled). Thank you in advance. I'd be glad if you suggested a way to do this even without the last paragraph.

  Read the article

• Coherent access to mainframe files from Win32 application and IBM RDZ/Eclipse?

  - by Ira Baxter

  I have a suite of tools for processing IBM COBOL source code; these tools are built as Win32 applications and talk to Windows (including network) files using traditional Windows file system calls (open, close, read, write) and work just fine, thank you. I'd like to integrate these with Eclipse; we understand how to get Eclipse to do UI for us we think. The problem is that Eclipse/RDZ users access mainframe files through some IBM magic. In How does RDZ access mainframe files I tried to understand how Eclipse accessed files on a mainframe. Apparantly Eclipse/RDZ has a secret filesystem access backdoor not available to normal mortals. At issue is how our tools, reading some Windows-accessible file (local disk file, NFS to mainframe, ...) can associate such files with the files that Eclipse can access or is using? Ideally we'd like UI-integrated versions of our tools take an Eclipse file-name string for a mainframe file, pass it to our Windows application to process, have the Windows application open/read/process the file, and return results associated with that file to the Eclipse UI. Is there a canonical file name path that would be used with mainframe NFS that would be equivalent to the name or access object the Eclipse RDZ used to access the same file? Are all operations doable internally by Eclipse, doable by the mainframe NFS [for instance, can NFS read/update an element in a partitioned data set? Can Eclipse RDZ? Does it matter?] Is the mainframe file access available to custom Java code running under Eclipse RDZ (e.g., equivalents of open/close/read/write based on filename/path/something?) If so, can somebody steer me towards documentation describing the access methods? Anybody else already solve this problem or have a good suggestion?

  Read the article

• Java - Draw Cards and Eliminate Cards Problem

  - by Jen

  I am having a problem in this question. I want a system inside a game wherein the player draws 2 cards randomly, and the enemy draws 2 cards randomly. Then, what the program does is to print out to the console the cards the player draw and the enemy's. The cards should not conflict and must not be the same. Then lastly, the program prints out the card that was not drawn by both the player and the enemy. Here's how I did it but it was lengthy and full of errors: import java.util.Random; public class Draw { public static Random random = new Random(); public static String cards[] = {"Hall", "Kitchen", "Billiard", "Study", "Pool"}; public static int playercounter; public static int enemycounter; public static String playercardA = null; public static String playercardB = null; public static String enemycardA = null; public static String enemycardB = null; public String lastcard = null; public static void playercardAdraw() { playercounter = random.nextInt(5); playercardA = cards[playercounter]; } public static void playercardBdraw() { playercounter=random.nextInt(5); playercardB= cards[playercounter]; if (playercardB==playercardA || playercardB == enemycardA || playercardB == enemycardB) { return; } } public static void enemycardAdraw () { enemycounter = random.nextInt(5); enemycardA=cards[enemycounter]; if (enemycardA == playercardA || enemycardA == playercardB) { return; } } public static void enemycardBdraw () { enemycounter = random.nextInt(5); enemycardB=cards[enemycounter]; if (enemycardB == playercardA || enemycardB == playercardB || enemycardB == enemycardA) { return; } } public static void main (String args []) { System.out.println("Starting to draw..."); System.out.println("Player's Turn: "); playercardAdraw(); System.out.println("Player's first card: " + playercardA); playercardBdraw(); System.out.println("Player's second card: " + playercardB); System.out.println("Enemy's Turn: "); enemycardAdraw(); System.out.println("Enemy's first card: " + enemycardA); enemycardBdraw(); System.out.println("Enemy's Second card: " + enemycardB); } }

  Read the article

• Draw Cards and Eliminate Cards Problem

  - by Jen

  I am having a problem in this question. I want a system inside a game wherein the player draws 2 cards randomly, and the enemy draws 2 cards randomly. Then, what the program does is to print out to the console the cards the player draw and the enemy's. The cards should not conflict and must not be the same. Then lastly, the program prints out the card that was not drawn by both the player and the enemy. Here's how I did it but it was lengthy and full of errors: import java.util.Random; public class Draw { public static Random random = new Random(); public static String cards[] = {"Hall", "Kitchen", "Billiard", "Study", "Pool"}; public static int playercounter; public static int enemycounter; public static String playercardA = null; public static String playercardB = null; public static String enemycardA = null; public static String enemycardB = null; public String lastcard = null; public static void playercardAdraw() { playercounter = random.nextInt(5); playercardA = cards[playercounter]; } public static void playercardBdraw() { playercounter=random.nextInt(5); playercardB= cards[playercounter]; if (playercardB==playercardA || playercardB == enemycardA || playercardB == enemycardB) { return; } } public static void enemycardAdraw () { enemycounter = random.nextInt(5); enemycardA=cards[enemycounter]; if (enemycardA == playercardA || enemycardA == playercardB) { return; } } public static void enemycardBdraw () { enemycounter = random.nextInt(5); enemycardB=cards[enemycounter]; if (enemycardB == playercardA || enemycardB == playercardB || enemycardB == enemycardA) { return; } } public static void main (String args []) { System.out.println("Starting to draw..."); System.out.println("Player's Turn: "); playercardAdraw(); System.out.println("Player's first card: " + playercardA); playercardBdraw(); System.out.println("Player's second card: " + playercardB); System.out.println("Enemy's Turn: "); enemycardAdraw(); System.out.println("Enemy's first card: " + enemycardA); enemycardBdraw(); System.out.println("Enemy's Second card: " + enemycardB); } }

  Read the article

• Slow Windows Explorer on Windows 7

  - by MadBoy

  I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

  Read the article

• Redirect all access requests to a domain and subdomain(s) except from specific IP address? [closed]

  - by Christopher

  This is a self-answered question... After much wrangling I found the magic combination of mod_rewrite rules so I'm posting here. My scenario is that I have two domains - domain1.com and domain2.com - both of which are currently serving identical content (by way of a global 301 redirect from domain1 to domain2). Domain1 was then chosen to be repurposed to be a 'portal' domain - with a corporate CMS-based site leading off from the front page, and the existing 'retail' domain (domain2) left to serve the main web site. In addition, a staging subdomain was created on domain1 in order to prepare the new corporate site without impinging on the root domain's existing operation. I contemplated just rewriting all requests to domain2 and setting up the new corporate site 'behind the scenes' without using a staging domain, but I usually use subdomains when setting up new sites. Finally, I required access to the 'actual' contents of the domains and subdomains - i.e., to not be redirected like all other visitors - in order that I can develop the new site and test it in the staging environment on the live server, as I'm not using a separate development webserver in this case. I also have another test subdomain on domain1 which needed to be preserved. The way I eventually set it up was as follows: (10.2.2.1 would be my home WAN IP) .htaccess in root of domain1 RewriteEngine On RewriteCond %{REMOTE_ADDR} !^10\.2\.2\.1 RewriteCond %{HTTP_HOST} !^staging.domain1.com$ [NC] RewriteCond %{HTTP_HOST} !^staging2.domain1.com$ [NC] RewriteRule ^(.*)$ http://domain2.com/$1 [R=301] .htaccess in staging subdomain on domain1: RewriteEngine On RewriteCond %{REMOTE_ADDR} !^10\.2\.2\.1 RewriteCond %{HTTP_HOST} ^staging.revolver.coop$ [NC] RewriteRule ^(.*)$ http://domain2.com/$1 [R=301,L] The multiple .htaccess files and multiple rulesets require more processing overhead and longer iteration as the visitor is potentially redirected twice, however I find it to be a more granular method of control as I can selectively allow more than one IP address access to individual staging subdomain(s) without automatically granting them access to everything else. It also keeps the rulesets fairly simple and easy to read. (or re-interpret, because I'm always forgetting how I put rules together!) If anybody can suggest a more efficient way of merging all these rules and conditions into just one main ruleset in the root of domain1, please post! I'm always keen to learn, this post is more my attempt to preserve this information for those who are looking to redirect entire domains for all visitors except themselves (for design/testing purposes) and not just denying specific file access for maintenance mode (there are many good examples of simple mod_rewrite rules for 'maintenance mode' style operation easily findable via Google). You can also extend the IP address detection - firstly by using wildcards ^10\.2\.2\..*: the last octet's \..* denotes the usual "." and then "zero or more arbitrary characters", signified by the .* - so you can specify specific ranges of IPs in a subnet or entire subnets if you wish. You can also use square brackets: ^10\.2\.[1-255]\.[120-140]; ^10\.2\.[1-9]?[0-9]\.; ^10\.2\.1[0-1][0-9]\. etc. The third way, if you wish to specify multiple discrete IP addresses, is to bracket them in the style of ^(1.1.1.1|2.2.2.2|3.3.3.3)$, and you can of course use square brackets to substitute octets or single digits again. NB: if you're using individual RewriteCond lines to specify multiple IPs / ranges, make sure to put [OR] at the end of each one otherwise mod_rewrite will interpret as "if IP address matches 1.1.1.1 AND if IP address matches 2.2.2.2... which is of course impossible! However as far as I'm aware this isn't necessary if you're using the ! negator to specify "and is not...". Kudos also to SE: this older question also came in useful when I was verifying my own knowledge prior to my futzing around with code. This page was helpful, as were the various other links posted below (can't hyperlink them all due to spam protection... other regex checkers are available). The AddedBytes cheat sheet's useful to pin up on your wall. Other referenced URLs: internetofficer.com/seo-tool/regex-tester/ fantomaster.com/faarticles/rewritingurls.txt internetofficer.com/seo-tool/regex-tester/ addedbytes.com/cheat-sheets/mod_rewrite-cheat-sheet/

  Read the article

• COM+/Desktop Heap errors in IIS affecting sites at random?

  - by tresstylez

  We have a Win2K3 server that is hosting 30+ sites. Each site is configured to have its own unique application pool -- so that we can manually recycle specific sites if needed and not kill sessions for the others. From what I've read, the consequence of this type of setup is that each application pool worker process gets allocated a Desktop Heap (normally 512 kb's) and we limit the number of app pools we can serve. http://blogs.msdn.com/b/david.wang/archive/2006/01/25/security-considerations-of-usesharedwpdesktop-on-iis6.aspx PROBLEM: What we're seeing is that occasionally COM+ errors get triggered, presumably by hitting our 512 kb limit of the desktop heap -- and certain sites become unresponsive (or have errors) until we manually recycle that specific app pool. I know that I can increase the desktop heap limit to 1024, and make other tweaks/tunes, but I've been tasked with finding out what exactly causes one site's heap to max out as opposed to another. It seems that when we start seeing COM+ errors, the sites it affects are random -- small sites or big sites (heavier used). Is it based on process id? Traffic? Any pointers on understanding this a little more would be excellent. Thanks! jg

  Read the article

• How do I use logback-access in combination with Tomcat 5.5?

  - by mcduke

  I've got several Web apps running on a Tomcat 5.5 server, and I'm working on improving/updating the overall logging system used throughout the system. I already had some success with logback-classic. However, when I try to use logback-access (i.e. access the lbAccessStatus servlet), I get this exception: exception javax.servlet.ServletException: Wrapper cannot find servlet class ch.qos.logback.access.ViewStatusMessagesServlet or a class it depends on org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:433) ... root cause java.lang.ClassNotFoundException: ch.qos.logback.access.ViewStatusMessagesServlet org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1386) ... I have everything set up according to the docs: common/lib: logback-classic-0.9.15.jar logback-core-0.9.15.jar server/lib: logback-access-0.9.15.jar Moving around the libraries doesn't seem to help. logback-classic seems to work fine, it's just logback-access that causes problems.

  Read the article

• How do you determine with CLLocationManager when a user denies access to location services?

  - by Brennan

  With CLLocationManager I can use the following code to determine if I can access location services on the device. This is the master setting for all apps and can be turned on and off. if (self.locationManager.locationServicesEnabled) { [self.locationManager startUpdatingLocation]; } But a user can deny access to an individual app and in order to not execute the code to use the location manager I need to know if the user approved access to location services for this specific app. I saw that at one point there was a property called locationServicesApproved which appears it would indicate if the user approved access to location services in this app. But it was removed in 2008. Source: http://trailsinthesand.com/apple-removes-notifications-from-iphone-sdk-beta-4/ It appears that there is no way to determine if the user approved access to location services but that seems to be a big hole in the SDK. Is this feature in the SDK elsewhere? What can I do to determine if the user has approved access to location services for the current app?

  Read the article

• Cisco Pix how to add an additional block of static ip addresses for nat?

  - by Scott Szretter

  I have a pix 501 with 5 static ip addresses. My isp just gave me 5 more. I am trying to figure out how to add the new block and then how to nat/open at least one of them to an inside machine. So far, I named a new interface "intf2", ip range is 71.11.11.58 - 62 (gateway should 71.11.11.57) imgsvr is the machine I want to nat to one of the (71.11.11.59) new ip addresses. mail (.123) is an example of a machine that is mapped to the current existing 5 ip block (96.11.11.121 gate / 96.11.11.122-127) and working fine. Building configuration... : Saved : PIX Version 6.3(4) interface ethernet0 auto interface ethernet0 vlan1 logical interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif vlan1 intf2 security1 enable password xxxxxxxxx encrypted passwd xxxxxxxxx encrypted hostname xxxxxxxPIX domain-name xxxxxxxxxxx no fixup protocol dns fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names ...snip... name 192.168.10.13 mail name 192.168.10.29 imgsvr object-group network vpn1 network-object mail 255.255.255.255 access-list outside_access_in permit tcp any host 96.11.11.124 eq www access-list outside_access_in permit tcp any host 96.11.11.124 eq https access-list outside_access_in permit tcp any host 96.11.11.124 eq 3389 access-list outside_access_in permit tcp any host 96.11.11.123 eq https access-list outside_access_in permit tcp any host 96.11.11.123 eq www access-list outside_access_in permit tcp any host 96.11.11.125 eq smtp access-list outside_access_in permit tcp any host 96.11.11.125 eq https access-list outside_access_in permit tcp any host 96.11.11.125 eq 10443 access-list outside_access_in permit tcp any host 96.11.11.126 eq smtp access-list outside_access_in permit tcp any host 96.11.11.126 eq https access-list outside_access_in permit tcp any host 96.11.11.126 eq 10443 access-list outside_access_in deny ip any any access-list inside_nat0_outbound permit ip 192.168.0.0 255.255.0.0 IPPool2 255.255.255.0 access-list inside_nat0_outbound permit ip 172.17.0.0 255.255.0.0 IPPool2 255.255.255.0 access-list inside_nat0_outbound permit ip 172.16.0.0 255.255.0.0 IPPool2 255.255.255.0 ...snip... access-list inside_access_in deny tcp any any eq smtp access-list inside_access_in permit ip any any pager lines 24 logging on logging buffered notifications mtu outside 1500 mtu inside 1500 ip address outside 96.11.11.122 255.255.255.248 ip address inside 192.168.10.15 255.255.255.0 ip address intf2 71.11.11.58 255.255.255.248 ip audit info action alarm ip audit attack action alarm pdm location exchange 255.255.255.255 inside pdm location mail 255.255.255.255 inside pdm location IPPool2 255.255.255.0 outside pdm location 96.11.11.122 255.255.255.255 inside pdm location 192.168.10.1 255.255.255.255 inside pdm location 192.168.10.6 255.255.255.255 inside pdm location mail-gate1 255.255.255.255 inside pdm location mail-gate2 255.255.255.255 inside pdm location imgsvr 255.255.255.255 inside pdm location 71.11.11.59 255.255.255.255 intf2 pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 96.11.11.123 global (intf2) 3 interface global (intf2) 4 71.11.11.59 nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 mail 255.255.255.255 0 0 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 96.11.11.123 smtp mail smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 96.11.11.123 https mail https netmask 255.255.255.255 0 0 static (inside,outside) tcp 96.11.11.123 www mail www netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.124 ts netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.126 mail-gate2 netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.125 mail-gate1 netmask 255.255.255.255 0 0 access-group outside_access_in in interface outside access-group inside_access_in in interface inside route outside 0.0.0.0 0.0.0.0 96.11.11.121 1 route intf2 0.0.0.0 0.0.0.0 71.11.11.57 2 timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute floodguard enable ...snip... : end [OK] Thanks!

  Read the article

• What could cause random files being downloaded without permission?

  - by Dustin

  I have been having issues lately with a certain directory. It seems someone is placing files into it, or something of that sort, and any attempt to delete them is successful, HOWEVER they reappear over time (maybe not the exact same ones, but random files). I will provide you the information I can and several pictures of my problem: sandbox.mys4l.com/visual/files/b1.jpg Files like this have been appearing in my /visual/ folder, and I have no clue where they are coming from. sandbox.mys4l.com/visual/files/b2.jpg This is what is inside on of those weird files, it appears to be nothing problematic. sandbox.mys4l.com/visual/files/b4.jpg As you can see, in the time it took me to take the first picture, more odd files showed up. These log files are also being uploaded to this directory, and I know I didn't put them there. sandbox.mys4l.com/visual/files/b7.jpg This inside one of these mysterious .log files, I'm not sure what it's all about. These files only appear to be going into this specific area, and I'm not sure of their origin, only that they will not go away. I have done a full system scan at least twice with an up-to-date virus scan, and have looked for an unknown script which may be writing them there. Nothing has come up, so I come to you guys as I hear this is the best place to find answers. Hope this problem has a solution!

  Read the article

• Computer always freezing after random periods of time. No errors listed.

  - by Wesley

  Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

  Read the article

• What could cause random files being uploaded without permission?

  - by Dustin

  I have been having issues lately with a certain directory. It seems someone is placing files into it, or something of that sort, and any attempt to delete them is successful, HOWEVER they reappear over time (maybe not the exact same ones, but random files). I will provide you the information I can and several pictures of my problem: sandbox.mys4l.com/visual/files/b1.jpg Files like this have been appearing in my /visual/ folder, and I have no clue where they are coming from. sandbox.mys4l.com/visual/files/b2.jpg This is what is inside on of those weird files, it appears to be nothing problematic. sandbox.mys4l.com/visual/files/b4.jpg As you can see, in the time it took me to take the first picture, more odd files showed up. These log files are also being uploaded to this directory, and I know I didn't put them there. sandbox.mys4l.com/visual/files/b7.jpg This inside one of these mysterious .log files, I'm not sure what it's all about. These files only appear to be going into this specific area, and I'm not sure of their origin, only that they will not go away. I have done a full system scan at least twice with an up-to-date virus scan, and have looked for an unknown script which may be writing them there. Nothing has come up, so I come to you guys as I hear this is the best place to find answers. Hope this problem has a solution!

  Read the article

• Solution - Login failed for user x. Reason Token based server access validation failed and error - 18456

  - by simonsabin

  Had a very bizarre situation yesterday where a local machine account couldn’t access SQL Server and was getting Login failed for user <user>. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <client ip>] along with Error: 18456, Severity: 14, State: 11. The user was in the logins even after a refresh, it was in the users for the database. I decided to delete and remove the login and heh presto it worked. I thought you...(read more)

  Read the article

• How to prevent access to website without SSL connection?

  - by CraigJ

  I have a website that has an SSL certificate installed, so that if I access the website using https instead of http I will be able to connect using a secure connection. However, I have noticed that I can still access the website non-securely, ie. by using http instead of https. How can I prevent people using the website in a non-secure manner? If I have a directory on the website, eg. samples/, can I prevent non-secure connections to just this directory?

  Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >