state pattern - Page 239

How can I bind an interface to a class decided by an xml or database configuration at the launch of the application?

- by ipohfly

I'm re-working on the design of an existing application which is build using WebForms. Currently the plan is to work it into a MVP pattern application while using Ninject as the IoC container. The reason for Ninject to be there is that the boss had wanted a certain flexibility within the system so that we can build in different flavor of business logic in the model and let the programmer to choose which to use based on the client request, either via XML configuration or database setting. I know that Ninject have no need for XML configuration, however I'm confused on how it can help to dynamically inject the dependency into the system? Imagine I have a interface IMember and I need to bind this interface to the class decided by a xml or database configuration at the launch of the application, how can I achieve that?

Read the article

Compaq Presario R3000 randomly fails to boot on 11.10, 12.04, 12.10

- by dlfuller

I’m trying to figure what to do with random failures to boot. My old HP Presario R3000 with AMD Athlon XP-M sometimes boots, sometimes hangs with a blank screen during boot, and sometimes hangs on shutdown. After a few boot attempts it will finally boot to the GNU GRUB screen where I usually can select Recovery Mode, then select return to a normal boot, and the thing will startup and function normally. The pattern is not repeatable and seemed to start after upgrading from 11.04. Clean installs of 12.04 and 12.10 on newly-formatted hard drives make no difference. If this might be a clue, hangs on shutdown often stop at a line with: “pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff 0x3c00-0x3cff”. I did try the “acpi=off” modification from 11.10 randomly fails to boot on Compaq Presario R3000 with no change in these random boot failures. Any suggestions sure appreciated.

Read the article

When designing an application around Model-View-Controller (MVC), what is in your toolbox?

- by ericgorr

There are a lot of great explanations for what the Model-View-Controller design pattern is, but I am having trouble finding good resources showing how to use it in practice. So, when you are starting a new application (doesn't matter what it is), what is in your toolbox? For example, it was suggested that using UML collaboration diagrams ( http://www.objectmentor.com/resources/articles/umlCollaborationDiagrams.pdf ) can be useful when designing an application around MVC, although, I am not certain exactly how or why this might be the case...? So, what is in your toolbox for MVC?

Read the article

Generate Unique Abstract Backgrounds with Ablaze

- by Jason Fitzpatrick

If you want custom and unique backgrounds without having to code your own image-generating engine, Ablaze makes it simple (and fun) to create abstract images. You can customize a wide array of options in Ablaze including the base shape (ring, horizontal line, or random), number of particles, distance each particle travels, and the speed (if you increase the speed range you get more distinct lines and if you decrease it you get smoother smokier shapes). You can also seed the design with a color palette pulled from any image you provide (the sample above was seeded with a Wonder Woman comic panel). Tweak and reset the pattern generation as much as you want; when you create an abstract image worthy of your desktop just click the save button to grab a copy of it in PNG format. Ablaze [via Flowing Data] How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

Read the article

Silverlight 4 + RIA Services - Ready for Business: Validating Data

To continue our series lets look at data validation our business applications. Updating data is great, but when you enable data update you often need to check the data to ensure it is valid. RIA Services as clean, prescriptive pattern for handling this. First lets look at what you get for free. The value for any field entered has to be valid for the range of that data type. For example, you never need to write code to ensure someone didnt type is forty-two into...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

How to elegantly work with a lot of print functions?

- by user1824372

I'm working on a Python project that is executed on a terminal (or console) for which I am planning to implement a GUI. I did not major in CS so I really have no idea how to effectively design a terminal GUI such that: the user interface looks good in GUI, it is directed to a certain widget, let's say, a text label, or a bottom bar, or a hide-able frame. Do you have any suggestions? Currently, I am using the print function to provide essential information on STDOUT during execution, so a lot of print calls are distributed here and there in the code. I'm thinking of using macro-like variables such as 'FILE_NOT_EXISTS_MESSAGE' for printing, and all of them and their values would be defined in one file. Is that a standard way to do this? Should I introduce a logging system? In summary, I'm looking for a pattern for handling console output that is effective and adaptable.

Read the article

Testing complex compositions

- by phlipsy

I have a rather large collection of classes which check and mutate a given data structure. They can be composed via the composition pattern into arbitrarily complex tree-like structures. The final product contains a lot of these composed structures. My question is now: How can I test those? Albeit it is easy to test every single unit of these compositions, it is rather expensive to test the whole compositions in the following sense: Testing the correct layout of the composition-tree results in a huge number of test cases Changes in the compositions result in a very laborious review of every single test case What is the general guideline here?

Read the article

What's New in JMS 2 - Part 1

- by reza_rahman

JMS 2 is one of the most significant parts of Java EE 7. One of the principal goals of the JMS 2 API is improving developer productivity by reducing the amount of code to work with JMS by adopting programming paradigms like higher level abstractions, dependency injection, annotations, runtime exceptions, the builder pattern and intelligent defaults. In a recent OTN article, JMS 2 specification lead Nigel Deakin covers the ease-of-use changes in detail. The article is the first of a two part series on JMS 2. For more visual folks, there is my JMS 2 slide deck: What’s New in Java Message Service 2 from Reza Rahman You can also check out the official specification yourself or try things out with the newly released Java EE 7 SDK.

Read the article

Software Design and documentation – what do people use that has proved valuable?

- by eddyparkinson

When creating software, what do you use to design, document and visualize. Looking for evidence/examples. e.g. Use cases, Pseudo code, Gantt chats, PERT charts, DFD, decision trees, decision tables (Answers maybe used to help teach students) What do you use to help with creating software. Also why; when has it proved valuable? --- Edit -- Proved valuable: The pattern so far suggests that the style of UML tool used is linked to an objective. e.g. "get it straight in MY head", explain to business mangers, quality control.

Read the article

Row Versioning Concurrency in SQL Server

The optimistic concurrency model assumes that several concurrent transactions can usually complete without interfering with each other, and therefore do not require draconian locking on the resources they access. SQL Server 2005, and later, implements a form of this model called row versioning concurrency. It works by remembering the value of the data at the start of the transaction and checking that no other transaction has modified it before committing. If this optimism is justified for the pattern of activity within a database, it can improve performance by greatly reducing blocking. Kalen Delaney explains how it works in SQL Server.

Read the article

Ideas for how to structure a developer class/course? [on hold]

- by Andy

Let's say I need to teach a 3-8 week course in programming/development at a technical school (no kids) (regardless of language or technology and the target audience is beginners). I need ideas to make it a awesome class where I : Maximize the students learning and experience Make sure they don't fall a sleep Engage the students Make it exciting! I can always do traditional lecture+exercises and repeat this pattern over and over, but I think this is to old-school. Things I have considered to add to the course are: - Require pair programming - Code-review together with the students I would like suggestions on how to make a modern training class state really awesome?

Read the article

How to create a manager class without global variables nor singletons?

- by Omega

I would like to implement some kind of manager class in my application. It will be in charge of loading textures, processing them, distributing them etc... At first, I wanted to make a global variable that simply contains an instance of my manager class. I found this question: http://stackoverflow.com/questions/4646577/global-variables-in-java. However, the users there seem to recommend to never use global variables. Fine then, I once heard about Singletons, so I though I could use that instead. I mean, creating just one instance of my manager class sounds good. However, I found this other question: When is Singleton appropriate?, which basically tells me that Singletons are, in most scenarios, some kind of anti-pattern. Now I am a bit lost - what other approach can I take to create my manager class, whose only requirement is to be accessible from anywhere?

Read the article

Initialize array in O(1) -- how is this trick called?

- by user946850

There is this pattern that trades performance of array access against the need to iterate it when clearing it. You keep a generation counter with each entry, and also a global generation counter. The "clear" operation increases the generation counter. On each access, you compare local vs. global generation counters; if they differ, the array has been reset. This has come up in StackOverflow recently, but I don't remember if this trick has an official name. Does it? One use case is Dijkstra's algorithm if only a tiny subset of the nodes has to be relaxed, and if this has to be done repeatedly.

Read the article

Best way to rename existing unique field names in database?

- by Rajdeep Siddhapura

I have a database table that contains id, filename, userId id is unique identifier filename should also be unique table may contain 10000 records When a user uploads a file it should be entered in database with given rules: If there is no record with same filename, it should be added as it is (Ex. foobar.pdf) If there is record with same filename, it should be added as uploadedName(2).ext (foobar(2).pdf) If there are n records with same base filename (foobar), it should be added as uploadedName(n+1).ext (foobar(20).pdf) Now if foobar(2).pdf is uploaded, it should be added as foobar(2)(2).pdf & so on This pattern needs to be followed because the file is already being uploaded at client side using ajax before sending the details to server and the file hosting service follows the above rules to name the files. My solution: maintain a file that contains all the names and the number of times it has occurred. if a filename that exists in file is entered, increase occurrence count and new name is generated, else add to it to file if the new name generated is in database, add it to file and generate new name

Read the article

Large Sprite Performance

- by Iansen

I've got a large Sprite generated using a set of vertices(x,y coordinates) and a bitmap pattern (using moveTo, lineTo, beginBitmapFill, endFill ...etc). It's about 15000 pixels wide and between 1500 - 2000 pixels high depending on the level -it's the terrain for a 2D game. My question is: what is the best way to display/move it on the stage - performance wise? Currently I'm just adding it to the stage as is...I get decent frame rate/ memory/ cpu usage but I want to optimize it for slower PCs. Any ideas? I've been reading a little about blitting but I'm not sure how to implement it in my case. Thanks.

Read the article

??11.2 RAC??OCR?Votedisk??ASM Diskgroup?????

- by Liu Maclean(???)

????????Oracle Allstarts??????????ocr?votedisk?ASM diskgroup??11gR2 RAC cluster?????????,????«?11gR2 RAC???ASM DISK Path????»??????,??????CRS??????11.2??ASM???????, ????????????”crsctl start crs -excl -nocrs “; ?????????,??ASM????ocr?????votedisk?????,??11.2????ocr?votedisk???ASM?,?ASM???????ocr?votedisk,?????ocr?votedisk????????cluter??????;???????????CRS????,?????diskgroup??????????,?????????????????? ??:?????????????????ASM LUN DISK,???OCR?????,????????4??????????,???????$GI_HOME,?????????;????votedisk?? ????: ??dd????ocr?votedisk??diskgroup header,??diskgroup corruption: 1. ??votedisk? ocr?? [root@vrh1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE a853d6204bbc4feabfd8c73d4c3b3001 (/dev/asm-diskh) [SYSTEMDG] 2. ONLINE a5b37704c3574f0fbf21d1d9f58c4a6b (/dev/asm-diskg) [SYSTEMDG] 3. ONLINE 36e5c51ff0294fc3bf2a042266650331 (/dev/asm-diski) [SYSTEMDG] 4. ONLINE af337d1512824fe4bf6ad45283517aaa (/dev/asm-diskj) [SYSTEMDG] 5. ONLINE 3c4a349e2e304ff6bf64b2b1c9d9cf5d (/dev/asm-diskk) [SYSTEMDG] Located 5 voting disk(s). su - grid [grid@vrh1 ~]$ ocrconfig -showbackup PROT-26: Oracle Cluster Registry backup locations were retrieved from a local copy vrh1 2012/08/09 01:59:56 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup00.ocr vrh1 2012/08/08 21:59:56 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup01.ocr vrh1 2012/08/08 17:59:55 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup02.ocr vrh1 2012/08/08 05:59:54 /g01/11.2.0/grid/cdata/vrh-cluster/day.ocr vrh1 2012/08/08 05:59:54 /g01/11.2.0/grid/cdata/vrh-cluster/week.ocr PROT-25: Manual backups for the Oracle Cluster Registry are not available 2. ??????????clusterware ,OHASD crsctl stop has -f 3. GetAsmDH.sh ==> GetAsmDH.sh?ASM disk header????? ????????,????????asm header [grid@vrh1 ~]$ ./GetAsmDH.sh ############################################ 1) Collecting Information About the Disks: ############################################ SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 9 03:28:13 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. SQL> Connected. SQL> SQL> SQL> SQL> SQL> SQL> SQL> 1 0 /dev/asm-diske 1 1 /dev/asm-diskd 2 0 /dev/asm-diskb 2 1 /dev/asm-diskc 2 2 /dev/asm-diskf 3 0 /dev/asm-diskh 3 1 /dev/asm-diskg 3 2 /dev/asm-diski 3 3 /dev/asm-diskj 3 4 /dev/asm-diskk SQL> SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options -rw-r--r-- 1 grid oinstall 1048 Aug 9 03:28 /tmp/HC/asmdisks.lst ############################################ 2) Generating asm_diskh.sh script. ############################################ -rwx------ 1 grid oinstall 666 Aug 9 03:28 /tmp/HC/asm_diskh.sh ############################################ 3) Executing asm_diskh.sh script to generate dd dumps. ############################################ -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_1_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_1_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_2.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_2.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_3.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_4.dd ############################################ 4) Compressing dd dumps in the next format: (asm_dd_header_all_.tar) ############################################ /tmp/HC/dsk_1_0.dd /tmp/HC/dsk_1_1.dd /tmp/HC/dsk_2_0.dd /tmp/HC/dsk_2_1.dd /tmp/HC/dsk_2_2.dd /tmp/HC/dsk_3_0.dd /tmp/HC/dsk_3_1.dd /tmp/HC/dsk_3_2.dd /tmp/HC/dsk_3_3.dd /tmp/HC/dsk_3_4.dd ./GetAsmDH.sh: line 81: compress: command not found ls: /tmp/HC/*.Z: No such file or directory [grid@vrh1 ~]$ 4. ??dd ?? ??ocr?votedisk??diskgroup [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskh bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00423853 seconds, 247 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskg bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.0045179 seconds, 232 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diski bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00469976 seconds, 223 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskj bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00344262 seconds, 305 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskk bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.0053518 seconds, 196 MB/s 5. ????????????HAS [root@vrh1 ~]# crsctl start has CRS-4123: Oracle High Availability Services has been started. ????ocr?votedisk??diskgroup??,??CSS???????,???????: alertvrh1.log [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:35:41.207 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:35:56.240 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:11.284 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:26.305 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:41.328 ocssd.log 2012-08-09 03:40:26.662: [ CSSD][1078700352]clssnmReadDiscoveryProfile: voting file discovery string(/dev/asm*) 2012-08-09 03:40:26.662: [ CSSD][1078700352]clssnmvDDiscThread: using discovery string /dev/asm* for initial discovery 2012-08-09 03:40:26.662: [ SKGFD][1078700352]Discovery with str:/dev/asm*: 2012-08-09 03:40:26.662: [ SKGFD][1078700352]UFS discovery with :/dev/asm*: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskf: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskb: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskj: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskh: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskc: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskd: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diske: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskg: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diski: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskk: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]OSS discovery with :/dev/asm*: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Handle 0xdf22a0 from lib :UFS:: for disk :/dev/asm-diskf: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Handle 0xf412a0 from lib :UFS:: for disk :/dev/asm-diskb: 2012-08-09 03:40:26.666: [ SKGFD][1078700352]Handle 0xf3a680 from lib :UFS:: for disk :/dev/asm-diskj: 2012-08-09 03:40:26.666: [ SKGFD][1078700352]Handle 0xf93da0 from lib :UFS:: for disk :/dev/asm-diskh: 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmvDiskVerify: Successful discovery of 0 disks 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmvFindInitialConfigs: No voting files found 2012-08-09 03:40:26.667: [ CSSD][1078700352](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds ?????ocr?votedisk??diskgroup?????: 1. ?-excl -nocrs ????cluster,??????ASM?? ????CRS [root@vrh1 vrh1]# crsctl start crs -excl -nocrs CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'vrh1' CRS-2676: Start of 'ora.mdnsd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'vrh1' CRS-2676: Start of 'ora.gpnpd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'vrh1' CRS-2672: Attempting to start 'ora.gipcd' on 'vrh1' CRS-2676: Start of 'ora.cssdmonitor' on 'vrh1' succeeded CRS-2676: Start of 'ora.gipcd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'vrh1' CRS-2672: Attempting to start 'ora.diskmon' on 'vrh1' CRS-2676: Start of 'ora.diskmon' on 'vrh1' succeeded CRS-2676: Start of 'ora.cssd' on 'vrh1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'vrh1' CRS-2672: Attempting to start 'ora.ctssd' on 'vrh1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'vrh1' CRS-2676: Start of 'ora.ctssd' on 'vrh1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'vrh1' CRS-2676: Start of 'ora.asm' on 'vrh1' succeeded 2.???ocr?votedisk??diskgroup,??compatible.asm???11.2: [root@vrh1 vrh1]# su - grid [grid@vrh1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 9 04:16:58 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> create diskgroup systemdg high redundancy disk '/dev/asm-diskh','/dev/asm-diskg','/dev/asm-diski','/dev/asm-diskj','/dev/asm-diskk' ATTRIBUTE 'compatible.rdbms' = '11.2', 'compatible.asm' = '11.2'; 3.?ocr backup???ocr??ocrcheck??: [root@vrh1 ~]# ocrconfig -restore /g01/11.2.0/grid/cdata/vrh-cluster/backup00.ocr [root@vrh1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 3180 Available space (kbytes) : 258940 ID : 1238458014 Device/File Name : +systemdg Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded 4. ????votedisk ,??????????: [grid@vrh1 ~]$ crsctl replace votedisk +SYSTEMDG CRS-4602: Failed 27 to add voting file 2e4e0fe285924f86bf5473d00dcc0388. CRS-4602: Failed 27 to add voting file 4fa54bb0cc5c4fafbf1a9be5479bf389. CRS-4602: Failed 27 to add voting file a109ead9ea4e4f28bfe233188623616a. CRS-4602: Failed 27 to add voting file 042c9fbd71b54f5abfcd3ab3408f3cf3. CRS-4602: Failed 27 to add voting file 7b5a8cd24f954fafbf835ad78615763f. Failed to replace voting disk group with +SYSTEMDG. CRS-4000: Command Replace failed, or completed with errors. ????????ASM???,???ASM: SQL> alter system set asm_diskstring='/dev/asm*'; System altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/11.2.0/grid/dbs/spfile+AS M1.ora [grid@vrh1 trace]$ crsctl replace votedisk +SYSTEMDG CRS-4256: Updating the profile Successful addition of voting disk 85edc0e82d274f78bfc58cdc73b8c68a. Successful addition of voting disk 201ffffc8ba44faabfe2efec2aa75840. Successful addition of voting disk 6f2a25c589964faabf6980f7c5f621ce. Successful addition of voting disk 93eb315648454f25bf3717df1a2c73d5. Successful addition of voting disk 3737240678964f88bfbfbd31d8b3829f. Successfully replaced voting disk group with +SYSTEMDG. CRS-4256: Updating the profile CRS-4266: Voting file(s) successfully replaced 5. ??has??,??cluster????: [root@vrh1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4537: Cluster Ready Services is online CRS-4529: Cluster Synchronization Services is online CRS-4533: Event Manager is online [root@vrh1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 85edc0e82d274f78bfc58cdc73b8c68a (/dev/asm-diskh) [SYSTEMDG] 2. ONLINE 201ffffc8ba44faabfe2efec2aa75840 (/dev/asm-diskg) [SYSTEMDG] 3. ONLINE 6f2a25c589964faabf6980f7c5f621ce (/dev/asm-diski) [SYSTEMDG] 4. ONLINE 93eb315648454f25bf3717df1a2c73d5 (/dev/asm-diskj) [SYSTEMDG] 5. ONLINE 3737240678964f88bfbfbd31d8b3829f (/dev/asm-diskk) [SYSTEMDG] Located 5 voting disk(s). [root@vrh1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE vrh1 ora.DATA.dg ONLINE ONLINE vrh1 ora.LISTENER.lsnr ONLINE ONLINE vrh1 ora.LSN_MACLEAN.lsnr ONLINE ONLINE vrh1 ora.SYSTEMDG.dg ONLINE ONLINE vrh1 ora.asm ONLINE ONLINE vrh1 Started ora.gsd OFFLINE OFFLINE vrh1 ora.net1.network ONLINE ONLINE vrh1 ora.ons ONLINE ONLINE vrh1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr http://www.askmaclean.com 1 ONLINE ONLINE vrh1 ora.cvu 1 OFFLINE OFFLINE ora.oc4j 1 OFFLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE vrh1 ora.vprod.db 1 ONLINE OFFLINE 2 ONLINE OFFLINE ora.vrh1.vip 1 ONLINE ONLINE vrh1 ora.vrh2.vip 1 ONLINE INTERMEDIATE vrh1 FAILED OVER

Read the article

??11.2 RAC??OCR?Votedisk??ASM Diskgroup?????

- by Liu Maclean(???)

????????Oracle Allstarts??????????ocr?votedisk?ASM diskgroup??11gR2 RAC cluster?????????,????«?11gR2 RAC???ASM DISK Path????»??????,??????CRS??????11.2??ASM???????, ????????????”crsctl start crs -excl -nocrs “; ?????????,??ASM????ocr?????votedisk?????,??11.2????ocr?votedisk???ASM?,?ASM???????ocr?votedisk,?????ocr?votedisk????????cluter??????;???????????CRS????,?????diskgroup??????????,?????????????????? ??:?????????????????ASM LUN DISK,???OCR?????,????????4??????????,???????$GI_HOME,?????????;????votedisk?? ????: ??dd????ocr?votedisk??diskgroup header,??diskgroup corruption: 1. ??votedisk? ocr?? [root@vrh1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE a853d6204bbc4feabfd8c73d4c3b3001 (/dev/asm-diskh) [SYSTEMDG] 2. ONLINE a5b37704c3574f0fbf21d1d9f58c4a6b (/dev/asm-diskg) [SYSTEMDG] 3. ONLINE 36e5c51ff0294fc3bf2a042266650331 (/dev/asm-diski) [SYSTEMDG] 4. ONLINE af337d1512824fe4bf6ad45283517aaa (/dev/asm-diskj) [SYSTEMDG] 5. ONLINE 3c4a349e2e304ff6bf64b2b1c9d9cf5d (/dev/asm-diskk) [SYSTEMDG] Located 5 voting disk(s). su - grid [grid@vrh1 ~]$ ocrconfig -showbackup PROT-26: Oracle Cluster Registry backup locations were retrieved from a local copy vrh1 2012/08/09 01:59:56 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup00.ocr vrh1 2012/08/08 21:59:56 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup01.ocr vrh1 2012/08/08 17:59:55 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup02.ocr vrh1 2012/08/08 05:59:54 /g01/11.2.0/grid/cdata/vrh-cluster/day.ocr vrh1 2012/08/08 05:59:54 /g01/11.2.0/grid/cdata/vrh-cluster/week.ocr PROT-25: Manual backups for the Oracle Cluster Registry are not available 2. ??????????clusterware ,OHASD crsctl stop has -f 3. GetAsmDH.sh ==> GetAsmDH.sh?ASM disk header????? ????????,????????asm header [grid@vrh1 ~]$ ./GetAsmDH.sh ############################################ 1) Collecting Information About the Disks: ############################################ SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 9 03:28:13 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. SQL> Connected. SQL> SQL> SQL> SQL> SQL> SQL> SQL> 1 0 /dev/asm-diske 1 1 /dev/asm-diskd 2 0 /dev/asm-diskb 2 1 /dev/asm-diskc 2 2 /dev/asm-diskf 3 0 /dev/asm-diskh 3 1 /dev/asm-diskg 3 2 /dev/asm-diski 3 3 /dev/asm-diskj 3 4 /dev/asm-diskk SQL> SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options -rw-r--r-- 1 grid oinstall 1048 Aug 9 03:28 /tmp/HC/asmdisks.lst ############################################ 2) Generating asm_diskh.sh script. ############################################ -rwx------ 1 grid oinstall 666 Aug 9 03:28 /tmp/HC/asm_diskh.sh ############################################ 3) Executing asm_diskh.sh script to generate dd dumps. ############################################ -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_1_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_1_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_2.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_2.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_3.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_4.dd ############################################ 4) Compressing dd dumps in the next format: (asm_dd_header_all_.tar) ############################################ /tmp/HC/dsk_1_0.dd /tmp/HC/dsk_1_1.dd /tmp/HC/dsk_2_0.dd /tmp/HC/dsk_2_1.dd /tmp/HC/dsk_2_2.dd /tmp/HC/dsk_3_0.dd /tmp/HC/dsk_3_1.dd /tmp/HC/dsk_3_2.dd /tmp/HC/dsk_3_3.dd /tmp/HC/dsk_3_4.dd ./GetAsmDH.sh: line 81: compress: command not found ls: /tmp/HC/*.Z: No such file or directory [grid@vrh1 ~]$ 4. ??dd ?? ??ocr?votedisk??diskgroup [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskh bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00423853 seconds, 247 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskg bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.0045179 seconds, 232 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diski bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00469976 seconds, 223 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskj bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00344262 seconds, 305 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskk bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.0053518 seconds, 196 MB/s 5. ????????????HAS [root@vrh1 ~]# crsctl start has CRS-4123: Oracle High Availability Services has been started. ????ocr?votedisk??diskgroup??,??CSS???????,???????: alertvrh1.log [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:35:41.207 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:35:56.240 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:11.284 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:26.305 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:41.328 ocssd.log 2012-08-09 03:40:26.662: [ CSSD][1078700352]clssnmReadDiscoveryProfile: voting file discovery string(/dev/asm*) 2012-08-09 03:40:26.662: [ CSSD][1078700352]clssnmvDDiscThread: using discovery string /dev/asm* for initial discovery 2012-08-09 03:40:26.662: [ SKGFD][1078700352]Discovery with str:/dev/asm*: 2012-08-09 03:40:26.662: [ SKGFD][1078700352]UFS discovery with :/dev/asm*: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskf: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskb: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskj: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskh: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskc: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskd: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diske: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskg: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diski: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskk: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]OSS discovery with :/dev/asm*: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Handle 0xdf22a0 from lib :UFS:: for disk :/dev/asm-diskf: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Handle 0xf412a0 from lib :UFS:: for disk :/dev/asm-diskb: 2012-08-09 03:40:26.666: [ SKGFD][1078700352]Handle 0xf3a680 from lib :UFS:: for disk :/dev/asm-diskj: 2012-08-09 03:40:26.666: [ SKGFD][1078700352]Handle 0xf93da0 from lib :UFS:: for disk :/dev/asm-diskh: 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmvDiskVerify: Successful discovery of 0 disks 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmvFindInitialConfigs: No voting files found 2012-08-09 03:40:26.667: [ CSSD][1078700352](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds ?????ocr?votedisk??diskgroup?????: 1. ?-excl -nocrs ????cluster,??????ASM?? ????CRS [root@vrh1 vrh1]# crsctl start crs -excl -nocrs CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'vrh1' CRS-2676: Start of 'ora.mdnsd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'vrh1' CRS-2676: Start of 'ora.gpnpd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'vrh1' CRS-2672: Attempting to start 'ora.gipcd' on 'vrh1' CRS-2676: Start of 'ora.cssdmonitor' on 'vrh1' succeeded CRS-2676: Start of 'ora.gipcd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'vrh1' CRS-2672: Attempting to start 'ora.diskmon' on 'vrh1' CRS-2676: Start of 'ora.diskmon' on 'vrh1' succeeded CRS-2676: Start of 'ora.cssd' on 'vrh1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'vrh1' CRS-2672: Attempting to start 'ora.ctssd' on 'vrh1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'vrh1' CRS-2676: Start of 'ora.ctssd' on 'vrh1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'vrh1' CRS-2676: Start of 'ora.asm' on 'vrh1' succeeded 2.???ocr?votedisk??diskgroup,??compatible.asm???11.2: [root@vrh1 vrh1]# su - grid [grid@vrh1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 9 04:16:58 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> create diskgroup systemdg high redundancy disk '/dev/asm-diskh','/dev/asm-diskg','/dev/asm-diski','/dev/asm-diskj','/dev/asm-diskk' ATTRIBUTE 'compatible.rdbms' = '11.2', 'compatible.asm' = '11.2'; 3.?ocr backup???ocr??ocrcheck??: [root@vrh1 ~]# ocrconfig -restore /g01/11.2.0/grid/cdata/vrh-cluster/backup00.ocr [root@vrh1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 3180 Available space (kbytes) : 258940 ID : 1238458014 Device/File Name : +systemdg Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded 4. ????votedisk ,??????????: [grid@vrh1 ~]$ crsctl replace votedisk +SYSTEMDG CRS-4602: Failed 27 to add voting file 2e4e0fe285924f86bf5473d00dcc0388. CRS-4602: Failed 27 to add voting file 4fa54bb0cc5c4fafbf1a9be5479bf389. CRS-4602: Failed 27 to add voting file a109ead9ea4e4f28bfe233188623616a. CRS-4602: Failed 27 to add voting file 042c9fbd71b54f5abfcd3ab3408f3cf3. CRS-4602: Failed 27 to add voting file 7b5a8cd24f954fafbf835ad78615763f. Failed to replace voting disk group with +SYSTEMDG. CRS-4000: Command Replace failed, or completed with errors. ????????ASM???,???ASM: SQL> alter system set asm_diskstring='/dev/asm*'; System altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/11.2.0/grid/dbs/spfile+AS M1.ora [grid@vrh1 trace]$ crsctl replace votedisk +SYSTEMDG CRS-4256: Updating the profile Successful addition of voting disk 85edc0e82d274f78bfc58cdc73b8c68a. Successful addition of voting disk 201ffffc8ba44faabfe2efec2aa75840. Successful addition of voting disk 6f2a25c589964faabf6980f7c5f621ce. Successful addition of voting disk 93eb315648454f25bf3717df1a2c73d5. Successful addition of voting disk 3737240678964f88bfbfbd31d8b3829f. Successfully replaced voting disk group with +SYSTEMDG. CRS-4256: Updating the profile CRS-4266: Voting file(s) successfully replaced 5. ??has??,??cluster????: [root@vrh1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4537: Cluster Ready Services is online CRS-4529: Cluster Synchronization Services is online CRS-4533: Event Manager is online [root@vrh1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 85edc0e82d274f78bfc58cdc73b8c68a (/dev/asm-diskh) [SYSTEMDG] 2. ONLINE 201ffffc8ba44faabfe2efec2aa75840 (/dev/asm-diskg) [SYSTEMDG] 3. ONLINE 6f2a25c589964faabf6980f7c5f621ce (/dev/asm-diski) [SYSTEMDG] 4. ONLINE 93eb315648454f25bf3717df1a2c73d5 (/dev/asm-diskj) [SYSTEMDG] 5. ONLINE 3737240678964f88bfbfbd31d8b3829f (/dev/asm-diskk) [SYSTEMDG] Located 5 voting disk(s). [root@vrh1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE vrh1 ora.DATA.dg ONLINE ONLINE vrh1 ora.LISTENER.lsnr ONLINE ONLINE vrh1 ora.LSN_MACLEAN.lsnr ONLINE ONLINE vrh1 ora.SYSTEMDG.dg ONLINE ONLINE vrh1 ora.asm ONLINE ONLINE vrh1 Started ora.gsd OFFLINE OFFLINE vrh1 ora.net1.network ONLINE ONLINE vrh1 ora.ons ONLINE ONLINE vrh1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr http://www.askmaclean.com 1 ONLINE ONLINE vrh1 ora.cvu 1 OFFLINE OFFLINE ora.oc4j 1 OFFLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE vrh1 ora.vprod.db 1 ONLINE OFFLINE 2 ONLINE OFFLINE ora.vrh1.vip 1 ONLINE ONLINE vrh1 ora.vrh2.vip 1 ONLINE INTERMEDIATE vrh1 FAILED OVER

Read the article

PC hangs and reboots from time to time

- by Bevor

Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

Read the article

'pip install carbon' looks like it works, but pip disagrees afterward

- by fennec

I'm trying to use pip to install the package carbon, a package related to statistics collection. When I run pip install carbon, it looks like everything works. However, pip is unconvinced that the package is actually installed. (This ultimately causes trouble because I'm using Puppet, and have a rule to install carbon using pip, and when puppet asks pip "is this package installed?" it says "no" and it reinstalls it again.) How do I figure out what's preventing pip from recognizing the success of this installation? Here is the output of the regular install: root@statsd:/opt/graphite# pip install carbon Downloading/unpacking carbon Downloading carbon-0.9.9.tar.gz Running setup.py egg_info for package carbon package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) Requirement already satisfied (use --upgrade to upgrade): twisted in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): txamqp in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): zope.interface in /usr/local/lib/python2.7/dist-packages (from twisted->carbon) Requirement already satisfied (use --upgrade to upgrade): distribute in /usr/local/lib/python2.7/dist-packages (from zope.interface->twisted->carbon) Installing collected packages: carbon Running setup.py install for carbon package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) changing mode of build/scripts-2.7/validate-storage-schemas.py from 664 to 775 changing mode of build/scripts-2.7/carbon-aggregator.py from 664 to 775 changing mode of build/scripts-2.7/carbon-cache.py from 664 to 775 changing mode of build/scripts-2.7/carbon-relay.py from 664 to 775 changing mode of build/scripts-2.7/carbon-client.py from 664 to 775 changing mode of /opt/graphite/bin/validate-storage-schemas.py to 775 changing mode of /opt/graphite/bin/carbon-aggregator.py to 775 changing mode of /opt/graphite/bin/carbon-cache.py to 775 changing mode of /opt/graphite/bin/carbon-relay.py to 775 changing mode of /opt/graphite/bin/carbon-client.py to 775 Successfully installed carbon Cleaning up... root@statsd:/opt/graphite# pip freeze | grep carbon root@statsd: Here is the verbose version of the install: root@statsd:/opt/graphite# pip install carbon -v Downloading/unpacking carbon Using version 0.9.9 (newest of versions: 0.9.9, 0.9.9, 0.9.8, 0.9.7, 0.9.6, 0.9.5) Downloading carbon-0.9.9.tar.gz Running setup.py egg_info for package carbon running egg_info creating pip-egg-info/carbon.egg-info writing requirements to pip-egg-info/carbon.egg-info/requires.txt writing pip-egg-info/carbon.egg-info/PKG-INFO writing top-level names to pip-egg-info/carbon.egg-info/top_level.txt writing dependency_links to pip-egg-info/carbon.egg-info/dependency_links.txt writing manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' warning: manifest_maker: standard file '-c' not found package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) reading manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' writing manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' Requirement already satisfied (use --upgrade to upgrade): twisted in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): txamqp in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): zope.interface in /usr/local/lib/python2.7/dist-packages (from twisted->carbon) Requirement already satisfied (use --upgrade to upgrade): distribute in /usr/local/lib/python2.7/dist-packages (from zope.interface->twisted->carbon) Installing collected packages: carbon Running setup.py install for carbon running install running build running build_py creating build creating build/lib.linux-i686-2.7 creating build/lib.linux-i686-2.7/carbon copying lib/carbon/amqp_publisher.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/manhole.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/instrumentation.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/cache.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/management.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/relayrules.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/events.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/protocols.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/conf.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/rewrite.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/hashing.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/writer.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/client.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/util.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/service.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/amqp_listener.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/routers.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/storage.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/log.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/__init__.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/state.py -> build/lib.linux-i686-2.7/carbon creating build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/receiver.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/rules.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/buffers.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/__init__.py -> build/lib.linux-i686-2.7/carbon/aggregator package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) creating build/lib.linux-i686-2.7/twisted creating build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_relay_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_aggregator_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_cache_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/carbon/amqp0-8.xml -> build/lib.linux-i686-2.7/carbon running build_scripts creating build/scripts-2.7 copying and adjusting bin/validate-storage-schemas.py -> build/scripts-2.7 copying and adjusting bin/carbon-aggregator.py -> build/scripts-2.7 copying and adjusting bin/carbon-cache.py -> build/scripts-2.7 copying and adjusting bin/carbon-relay.py -> build/scripts-2.7 copying and adjusting bin/carbon-client.py -> build/scripts-2.7 changing mode of build/scripts-2.7/validate-storage-schemas.py from 664 to 775 changing mode of build/scripts-2.7/carbon-aggregator.py from 664 to 775 changing mode of build/scripts-2.7/carbon-cache.py from 664 to 775 changing mode of build/scripts-2.7/carbon-relay.py from 664 to 775 changing mode of build/scripts-2.7/carbon-client.py from 664 to 775 running install_lib copying build/lib.linux-i686-2.7/carbon/amqp_publisher.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/manhole.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/amqp0-8.xml -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/instrumentation.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/cache.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/management.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/relayrules.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/events.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/protocols.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/conf.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/rewrite.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/hashing.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/writer.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/client.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/util.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/aggregator/receiver.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/rules.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/buffers.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/__init__.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/service.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/amqp_listener.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/routers.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/storage.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/log.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/__init__.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/state.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/twisted/plugins/carbon_relay_plugin.py -> /opt/graphite/lib/twisted/plugins copying build/lib.linux-i686-2.7/twisted/plugins/carbon_aggregator_plugin.py -> /opt/graphite/lib/twisted/plugins copying build/lib.linux-i686-2.7/twisted/plugins/carbon_cache_plugin.py -> /opt/graphite/lib/twisted/plugins byte-compiling /opt/graphite/lib/carbon/amqp_publisher.py to amqp_publisher.pyc byte-compiling /opt/graphite/lib/carbon/manhole.py to manhole.pyc byte-compiling /opt/graphite/lib/carbon/instrumentation.py to instrumentation.pyc byte-compiling /opt/graphite/lib/carbon/cache.py to cache.pyc byte-compiling /opt/graphite/lib/carbon/management.py to management.pyc byte-compiling /opt/graphite/lib/carbon/relayrules.py to relayrules.pyc byte-compiling /opt/graphite/lib/carbon/events.py to events.pyc byte-compiling /opt/graphite/lib/carbon/protocols.py to protocols.pyc byte-compiling /opt/graphite/lib/carbon/conf.py to conf.pyc byte-compiling /opt/graphite/lib/carbon/rewrite.py to rewrite.pyc byte-compiling /opt/graphite/lib/carbon/hashing.py to hashing.pyc byte-compiling /opt/graphite/lib/carbon/writer.py to writer.pyc byte-compiling /opt/graphite/lib/carbon/client.py to client.pyc byte-compiling /opt/graphite/lib/carbon/util.py to util.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/receiver.py to receiver.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/rules.py to rules.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/buffers.py to buffers.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/__init__.py to __init__.pyc byte-compiling /opt/graphite/lib/carbon/service.py to service.pyc byte-compiling /opt/graphite/lib/carbon/amqp_listener.py to amqp_listener.pyc byte-compiling /opt/graphite/lib/carbon/routers.py to routers.pyc byte-compiling /opt/graphite/lib/carbon/storage.py to storage.pyc byte-compiling /opt/graphite/lib/carbon/log.py to log.pyc byte-compiling /opt/graphite/lib/carbon/__init__.py to __init__.pyc byte-compiling /opt/graphite/lib/carbon/state.py to state.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_relay_plugin.py to carbon_relay_plugin.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_aggregator_plugin.py to carbon_aggregator_plugin.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_cache_plugin.py to carbon_cache_plugin.pyc running install_data copying conf/storage-schemas.conf.example -> /opt/graphite/conf copying conf/rewrite-rules.conf.example -> /opt/graphite/conf copying conf/relay-rules.conf.example -> /opt/graphite/conf copying conf/carbon.amqp.conf.example -> /opt/graphite/conf copying conf/aggregation-rules.conf.example -> /opt/graphite/conf copying conf/carbon.conf.example -> /opt/graphite/conf running install_egg_info running egg_info creating lib/carbon.egg-info writing requirements to lib/carbon.egg-info/requires.txt writing lib/carbon.egg-info/PKG-INFO writing top-level names to lib/carbon.egg-info/top_level.txt writing dependency_links to lib/carbon.egg-info/dependency_links.txt writing manifest file 'lib/carbon.egg-info/SOURCES.txt' warning: manifest_maker: standard file '-c' not found reading manifest file 'lib/carbon.egg-info/SOURCES.txt' writing manifest file 'lib/carbon.egg-info/SOURCES.txt' removing '/opt/graphite/lib/carbon-0.9.9-py2.7.egg-info' (and everything under it) Copying lib/carbon.egg-info to /opt/graphite/lib/carbon-0.9.9-py2.7.egg-info running install_scripts copying build/scripts-2.7/validate-storage-schemas.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-aggregator.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-cache.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-relay.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-client.py -> /opt/graphite/bin changing mode of /opt/graphite/bin/validate-storage-schemas.py to 775 changing mode of /opt/graphite/bin/carbon-aggregator.py to 775 changing mode of /opt/graphite/bin/carbon-cache.py to 775 changing mode of /opt/graphite/bin/carbon-relay.py to 775 changing mode of /opt/graphite/bin/carbon-client.py to 775 writing list of installed files to '/tmp/pip-9LuJTF-record/install-record.txt' Successfully installed carbon Cleaning up... Removing temporary dir /opt/graphite/build... root@statsd:/opt/graphite# For reference, this is pip 1.0 from /usr/lib/python2.7/dist-packages (python 2.7)

Read the article

OpenVPN - Windows 8 to Windows 2008 Server, not connecting

- by niico

I have followed this tutorial about setting up an OpenVPN Server on Windows Server - and a client on Windows (in this case Windows 8). The server appears to be running fine - but it is not connecting with this error: Mon Jul 22 19:09:04 2013 Warning: cannot open --log file: C:\Program Files\OpenVPN\log\my-laptop.log: Access is denied. (errno=5) Mon Jul 22 19:09:04 2013 OpenVPN 2.3.2 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [IPv6] built on Jun 3 2013 Mon Jul 22 19:09:04 2013 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:04 2013 Need hold release from management interface, waiting... Mon Jul 22 19:09:05 2013 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'state on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'log all on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold off' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold release' Mon Jul 22 19:09:05 2013 Socket Buffers: R=[65536->65536] S=[65536->65536] Mon Jul 22 19:09:05 2013 UDPv4 link local: [undef] Mon Jul 22 19:09:05 2013 UDPv4 link remote: [AF_INET]66.666.66.666:9999 Mon Jul 22 19:09:05 2013 MANAGEMENT: >STATE:1374494945,WAIT,,, Mon Jul 22 19:10:05 2013 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Mon Jul 22 19:10:05 2013 TLS Error: TLS handshake failed Mon Jul 22 19:10:05 2013 SIGUSR1[soft,tls-error] received, process restarting Mon Jul 22 19:10:05 2013 MANAGEMENT: >STATE:1374495005,RECONNECTING,tls-error,, Mon Jul 22 19:10:05 2013 Restart pause, 2 second(s) Note I have changed the IP and port no (it uses a non-standard port for security reasons). That port is open on the hardware firewall. The server logs are showing a connection attempt from my client: TLS: Initial packet from [AF_INET]118.68.xx.xx:65011, sid=081af4ed xxxxxxxx Mon Jul 22 14:19:15 2013 118.68.xx.xx:65011 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) How can I problem solve this & find the problem? Thx Update - Client config file: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote 00.00.00.00 1194 ;remote 00.00.00.00 9999 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\my-laptop.crt" key "C:\\Program Files\\OpenVPN\\config\\my-laptop.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Server config file: ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) ;local 00.00.00.00 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. std 1194 port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\server.crt" key "C:\\Program Files\\OpenVPN\\config\\server.key" # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh "C:\\Program Files\\OpenVPN\\config\\dh2048.pem" # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow differenta # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nobody # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I have changed IP's for security

Read the article

501 Error during Libjingle PCP on Amazone EC2 running Openfire

- by AeroBuffalo

I am trying to implement Google's Libjingle (version: 0.6.14) PCP example and I am getting a 501: feature not implemented error during execution. Specifically, the error occurs after each "account" has connected, been authenticated and began communicating with the other. An abbreviated log of the interaction is provided at the end. I have set up my own jabber server (using OpenFire on an Amazon EC2 server), have opened all of the necessary ports and have added each "account" to the other's roster. The server has been set to allow for file transfers. My being new to working with servers, I am not sure why this error is occur and how to go about fixing it. Thanks in advance, AeroBuffalo P.S. Let me know if there is any additional information needed (i.e. the full program log for either/both ends). Receiving End: [018:217] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [018:217] <iq to="[email protected]/pcp" type="set" id="5"> [018:217] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="402024303" initiator="[email protected]/pcp"> [018:217] <content name="securetunnel" creator="initiator"> [018:217] <description xmlns="http://www.google.com/talk/securetunnel"> [018:217] <type>send:winein.jpeg</type> [018:217] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:217] </description> [018:217] <transport xmlns="http://www.google.com/transport/p2p"/> [018:217] </content> [018:217] </jingle> [018:217] <session xmlns="http://www.google.com/session" type="initiate" id="402024303" initiator="[email protected]/pcp"> [018:217] <description xmlns="http://www.google.com/talk/securetunnel"> [018:217] <type>send:winein.jpeg</type> [018:217] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:217] </description></session> [018:217] </iq> [018:217] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:217] <presence to="[email protected]/pcp" from="forgesend" type="error"> [018:217] <error code="404" type="cancel"> [018:217] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [018:217] </error></presence> [018:218] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:218] <presence to="[email protected]/pcp" from="forgesend" type="error"> [018:218] <error code="404" type="cancel"> [018:218] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [018:218] </error></presence> [018:264] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:264] <iq type="result" id="3" to="[email protected]/pcp"> [018:264] <query xmlns="google:jingleinfo"> [018:264] <stun> [018:264] <server host="stun.xten.net" udp="3478"/> [018:264] <server host="jivesoftware.com" udp="3478"/> [018:264] <server host="igniterealtime.org" udp="3478"/> [018:264] <server host="stun.fwdnet.net" udp="3478"/> [018:264] </stun> [018:264] <publicip ip="65.101.207.121"/> [018:264] </query></iq> [018:420] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:420] <iq to="[email protected]/pcp" type="set" id="5" from="[email protected]/pcp"> [018:420] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="3548650675" initiator="[email protected]/pcp"> [018:420] <content name="securetunnel" creator="initiator"> [018:420] <description xmlns="http://www.google.com/talk/securetunnel"> [018:420] <type>recv:wineout.jpeg</type> [018:420] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:420] </description> [018:420] <transport xmlns="http://www.google.com/transport/p2p"/> [018:420] </content></jingle> [018:420] <session xmlns="http://www.google.com/session" type="initiate" id="3548650675" initiator="[email protected]/pcp"> [018:420] <description xmlns="http://www.google.com/talk/securetunnel"> [018:420] <type>recv:wineout.jpeg</type> [018:420] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:420] </description></session></iq> [018:421] TunnelSessionClientBase::OnSessionCreate: received=1 [018:421] Session:3548650675 Old state:STATE_INIT New state:STATE_RECEIVEDINITIATE Type:http://www.google.com/talk/securetunnel Transport:http://www.google.com/transport/p2p [018:421] TunnelSession::OnSessionState(Session::STATE_RECEIVEDINITIATE) [018:421] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [018:421] <iq to="[email protected]/pcp" id="5" type="result"/> [018:465] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:465] <iq to="[email protected]/pcp" id="5" type="result" from="[email protected]/pcp"/> [198:665] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:20:15 2012 [198:665] <iq type="get" id="162-10" from="forgejabber.com" to="[email protected]/pcp"> [198:665] <ping xmlns="urn:xmpp:ping"/> [198:665] /iq> [198:665] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:20:15 2012 [198:665] <iq type="error" id="162-10" to="forgejabber.com"> [198:665] <ping xmlns="urn:xmpp:ping"/> [198:665] <error code="501" type="cancel"> [198:665] <feature-not-implemented xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [198:665] </error> [198:665] </iq> Sender: [019:043] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [019:043] <iq type="get" id="3"> [019:043] <query xmlns="google:jingleinfo"/> [019:043] </iq> [019:043] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [019:043] <iq to="[email protected]/pcp" type="set" id="5"> [019:043] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="3548650675" initiator="[email protected]/pcp"> [019:043] <content name="securetunnel" creator="initiator"> [019:043] <description xmlns="http://www.google.com/talk/securetunnel"> [019:043] <type>recv:wineout.jpeg</type> [019:043] <client-cert>--BEGIN CERTIFICATE----END CERTIFICATE--</client-cert> [019:043] </description> [019:043] <transport xmlns="http://www.google.com/transport/p2p"/> [019:043] </content> [019:043] </jingle> [019:043] <session xmlns="http://www.google.com/session" type="initiate" id="3548650675" initiator="[email protected]/pcp"> [019:043] <description xmlns="http://www.google.com/talk/securetunnel"> [019:043] <type>recv:wineout.jpeg</type> [019:043] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [019:043] </description></session></iq> [019:043] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:043] <presence to="[email protected]/pcp" from="forgereceive" type="error"> [019:043] <error code="404" type="cancel"> [019:043] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [019:043] </error></presence> [019:044] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:044] <presence to="[email protected]/pcp" from="forgereceive" type="error"> [019:044] <error code="404" type="cancel"> [019:044] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [019:044] </error></presence> [019:044] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:044] <iq to="[email protected]/pcp" type="set" id="5" from="[email protected]/pcp"> [019:044] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="402024303" initiator="[email protected]/pcp"> [019:044] <content name="securetunnel" creator="initiator"> [019:044] <description xmlns="http://www.google.com/talk/securetunnel"> [019:044] <type>send:winein.jpeg</type> [019:044] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [019:044] </description> [019:044] <transport xmlns="http://www.google.com/transport/p2p"/> [019:044] </content></jingle> [019:044] <session xmlns="http://www.google.com/session" type="initiate" id="402024303" initiator="[email protected]/pcp"> [019:044] <description xmlns="http://www.google.com/talk/securetunnel"> [019:044] <type>send:winein.jpeg</type> [019:044] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [019:044] </description></session></iq> [019:044] TunnelSessionClientBase::OnSessionCreate: received=1 [019:044] Session:402024303 Old state:STATE_INIT New state:STATE_RECEIVEDINITIATE Type:http://www.google.com/talk/securetunnel Transport:http://www.google.com/transport/p2p [019:044] TunnelSession::OnSessionState(Session::STATE_RECEIVEDINITIATE) [019:044] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [019:044] <iq to="[email protected]/pcp" id="5" type="result"/> [019:088] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:088] <iq type="result" id="3" to="[email protected]/pcp"> [019:088] <query xmlns="google:jingleinfo"> [019:088] <stun> [019:088] <server host="stun.xten.net" udp="3478"/> [019:088] <server host="jivesoftware.com" udp="3478"/> [019:088] <server host="igniterealtime.org" udp="3478"/> [019:088] <server host="stun.fwdnet.net" udp="3478"/> [019:088] </stun> [019:088] <publicip ip="65.101.207.121"/> [019:088] </query> [019:088] </iq> [019:183] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:183] <iq to="[email protected]/pcp" id="5" type="result" from="[email protected]/pcp"/> [199:381] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:20:15 2012 [199:381] <iq type="get" id="474-11" from="forgejabber.com" to="[email protected]/pcp"> [199:381] <ping xmlns="urn:xmpp:ping"/> [199:381] </iq> [199:381] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:20:15 2012 [199:381] <iq type="error" id="474-11" to="forgejabber.com"> [199:381] <ping xmlns="urn:xmpp:ping"/> [199:381] <error code="501" type="cancel"> [199:381] <feature-not-implemented xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [199:382] </error></iq>

Read the article

SQL SERVER – Introduction to Extended Events – Finding Long Running Queries

- by pinaldave

The job of an SQL Consultant is very interesting as always. The month before, I was busy doing query optimization and performance tuning projects for our clients, and this month, I am busy delivering my performance in Microsoft SQL Server 2005/2008 Query Optimization and & Performance Tuning Course. I recently read white paper about Extended Event by SQL Server MVP Jonathan Kehayias. You can read the white paper here: Using SQL Server 2008 Extended Events. I also read another appealing chapter by Jonathan in the book, SQLAuthority Book Review – Professional SQL Server 2008 Internals and Troubleshooting. After reading these excellent notes by Jonathan, I decided to upgrade my course and include Extended Event as one of the modules. This week, I have delivered Extended Events session two times and attendees really liked the said course. They really think Extended Events is one of the most powerful tools available. Extended Events can do many things. I suggest that you read the white paper I mentioned to learn more about this tool. Instead of writing a long theory, I am going to write a very quick script for Extended Events. This event session captures all the longest running queries ever since the event session was started. One of the many advantages of the Extended Events is that it can be configured very easily and it is a robust method to collect necessary information in terms of troubleshooting. There are many targets where you can store the information, which include XML file target, which I really like. In the following Events, we are writing the details of the event at two locations: 1) Ringer Buffer; and 2) XML file. It is not necessary to write at both places, either of the two will do. -- Extended Event for finding *long running query* IF EXISTS(SELECT * FROM sys.server_event_sessions WHERE name='LongRunningQuery') DROP EVENT SESSION LongRunningQuery ON SERVER GO -- Create Event CREATE EVENT SESSION LongRunningQuery ON SERVER -- Add event to capture event ADD EVENT sqlserver.sql_statement_completed ( -- Add action - event property ACTION (sqlserver.sql_text, sqlserver.tsql_stack) -- Predicate - time 1000 milisecond WHERE sqlserver.sql_statement_completed.duration > 1000 ) -- Add target for capturing the data - XML File ADD TARGET package0.asynchronous_file_target( SET filename='c:\LongRunningQuery.xet', metadatafile='c:\LongRunningQuery.xem'), -- Add target for capturing the data - Ring Bugger ADD TARGET package0.ring_buffer (SET max_memory = 4096) WITH (max_dispatch_latency = 1 seconds) GO -- Enable Event ALTER EVENT SESSION LongRunningQuery ON SERVER STATE=START GO -- Run long query (longer than 1000 ms) SELECT * FROM AdventureWorks.Sales.SalesOrderDetail ORDER BY UnitPriceDiscount DESC GO -- Stop the event ALTER EVENT SESSION LongRunningQuery ON SERVER STATE=STOP GO -- Read the data from Ring Buffer SELECT CAST(dt.target_data AS XML) AS xmlLockData FROM sys.dm_xe_session_targets dt JOIN sys.dm_xe_sessions ds ON ds.Address = dt.event_session_address JOIN sys.server_event_sessions ss ON ds.Name = ss.Name WHERE dt.target_name = 'ring_buffer' AND ds.Name = 'LongRunningQuery' GO -- Read the data from XML File SELECT event_data_XML.value('(event/data[1])[1]','VARCHAR(100)') AS Database_ID, event_data_XML.value('(event/data[2])[1]','INT') AS OBJECT_ID, event_data_XML.value('(event/data[3])[1]','INT') AS object_type, event_data_XML.value('(event/data[4])[1]','INT') AS cpu, event_data_XML.value('(event/data[5])[1]','INT') AS duration, event_data_XML.value('(event/data[6])[1]','INT') AS reads, event_data_XML.value('(event/data[7])[1]','INT') AS writes, event_data_XML.value('(event/action[1])[1]','VARCHAR(512)') AS sql_text, event_data_XML.value('(event/action[2])[1]','VARCHAR(512)') AS tsql_stack, CAST(event_data_XML.value('(event/action[2])[1]','VARCHAR(512)') AS XML).value('(frame/@handle)[1]','VARCHAR(50)') AS handle FROM ( SELECT CAST(event_data AS XML) event_data_XML, * FROM sys.fn_xe_file_target_read_file ('c:\LongRunningQuery*.xet', 'c:\LongRunningQuery*.xem', NULL, NULL)) T GO -- Clean up. Drop the event DROP EVENT SESSION LongRunningQuery ON SERVER GO Just run the above query, afterwards you will find following result set. This result set contains the query that was running over 1000 ms. In our example, I used the XML file, and it does not reset when SQL services or computers restarts (if you are using DMV, it will reset when SQL services restarts). This event session can be very helpful for troubleshooting. Let me know if you want me to write more about Extended Events. I am totally fascinated with this feature, so I’m planning to acquire more knowledge about it so I can determine its other usages. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Training, SQLServer, T SQL, Technology Tagged: SQL Extended Events

Read the article

SQL SERVER – Disable Clustered Index and Data Insert

- by pinaldave

Earlier today I received following email. “Dear Pinal, [Removed unrelated content] We looked at your script and found out that in your script of disabling indexes, you have only included non-clustered index during the bulk insert and missed to disabled all the clustered index. Our DBA[name removed] has changed your script a bit and included all the clustered indexes. Since our application is not working. When DBA [name removed] tried to enable clustered indexes again he is facing error incorrect syntax error. We are in deep problem [word replaced] [Removed Identity of organization and few unrelated stuff ]“ I have replied to my client and helped them fixed the problem. What really came to my attention is the concept of disabling clustered index. Let us try to learn a lesson from this experience. In this case, there was no need to disable clustered index at all. I had done necessary work when I was called in to work on tuning project. I had removed unused indexes, created few optimal indexes and wrote a script to disable few selected high cost indexes when bulk insert (and similar) operations are performed. There was another script which rebuild all the indexes as well. The solution worked till they included clustered index in disabling the script. Clustered indexes are in fact original table (or heap) physically ordered (any more things – not scope of this article) according to one or more keys(columns). When clustered index is disabled data rows of the disabled clustered index cannot be accessed. This means there will be no insert possible. When non clustered indexes are disabled all the data related to physically deleted but the definition of the index is kept in the system. Due to the same reason even reorganization of the index is not possible till the clustered index (which was disabled) is rebuild. Now let us come to the second part of the question, regarding receiving the error when clustered index is ‘enabled’. This is very common question I receive on the blog. (The following statement is written keeping the syntax of T-SQL in mind) Clustered indexes can be disabled but can not be enabled, they have to rebuild. It is intuitive to think that something which we have ‘disabled’ can be ‘enabled’ but the syntax for the same is ‘rebuild’. This issue has been explained here: SQL SERVER – How to Enable Index – How to Disable Index – Incorrect syntax near ‘ENABLE’. Let us go over this example where inserting the data is not possible when clustered index is disabled. USE AdventureWorks GO -- Create Table CREATE TABLE [dbo].[TableName]( [ID] [int] NOT NULL, [FirstCol] [varchar](50) NULL, CONSTRAINT [PK_TableName] PRIMARY KEY CLUSTERED ([ID] ASC) ) GO -- Create Nonclustered Index CREATE UNIQUE NONCLUSTERED INDEX [IX_NonClustered_TableName] ON [dbo].[TableName] ([FirstCol] ASC) GO -- Populate Table INSERT INTO [dbo].[TableName] SELECT 1, 'First' UNION ALL SELECT 2, 'Second' UNION ALL SELECT 3, 'Third' GO -- Disable Nonclustered Index ALTER INDEX [IX_NonClustered_TableName] ON [dbo].[TableName] DISABLE GO -- Insert Data should work fine INSERT INTO [dbo].[TableName] SELECT 4, 'Fourth' UNION ALL SELECT 5, 'Fifth' GO -- Disable Clustered Index ALTER INDEX [PK_TableName] ON [dbo].[TableName] DISABLE GO -- Insert Data will fail INSERT INTO [dbo].[TableName] SELECT 6, 'Sixth' UNION ALL SELECT 7, 'Seventh' GO /* Error: Msg 8655, Level 16, State 1, Line 1 The query processor is unable to produce a plan because the index 'PK_TableName' on table or view 'TableName' is disabled. */ -- Reorganizing Index will also throw an error ALTER INDEX [PK_TableName] ON [dbo].[TableName] REORGANIZE GO /* Error: Msg 1973, Level 16, State 1, Line 1 Cannot perform the specified operation on disabled index 'PK_TableName' on table 'dbo.TableName'. */ -- Rebuliding should work fine ALTER INDEX [PK_TableName] ON [dbo].[TableName] REBUILD GO -- Insert Data should work fine INSERT INTO [dbo].[TableName] SELECT 6, 'Sixth' UNION ALL SELECT 7, 'Seventh' GO -- Clean Up DROP TABLE [dbo].[TableName] GO I hope this example is clear enough. There were few additional posts I had written years ago, I am listing them here. SQL SERVER – Enable and Disable Index Non Clustered Indexes Using T-SQL SQL SERVER – Enabling Clustered and Non-Clustered Indexes – Interesting Fact Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Constraint and Keys, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Can't install git on Ubuntu 12.10

- by Lucas Windir

I'm following these instructions to install git on my laptop: http://git-scm.com/download/linux When I do: $ sudo apt-get install git-core This is what my terinal shows: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libasprintf0c2:i386 libcroco3:i386 libgettextpo0:i386 libgomp1:i386 libunistring0:i386 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: git git-man liberror-perl Suggested packages: git-daemon-run git-daemon-sysvinit git-doc git-el git-arch git-cvs git-svn git-email git-gui gitk gitweb The following NEW packages will be installed: git git-core git-man liberror-perl 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 6,825 kB of archives. After this operation, 15.3 MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! liberror-perl git-man git git-core Install these packages without verification [y/N]? E: Some packages could not be authenticated lucas@lucas-Inspiron-N5050:~$ sudo apt-get install git-core Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libasprintf0c2:i386 libcroco3:i386 libgettextpo0:i386 libgomp1:i386 libunistring0:i386 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: git git-man liberror-perl Suggested packages: git-daemon-run git-daemon-sysvinit git-doc git-el git-arch git-cvs git-svn git-email git-gui gitk gitweb The following NEW packages will be installed: git git-core git-man liberror-perl 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 6,825 kB of archives. After this operation, 15.3 MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! liberror-perl git-man git git-core Install these packages without verification [y/N]? y Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main liberror-perl all 0.17-1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main git-man all 1:1.7.10.4-1ubuntu1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main git amd64 1:1.7.10.4-1ubuntu1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main git-core all 1:1.7.10.4-1ubuntu1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch httpq://py.archive.ubuntu.com/ubuntu/pool/main/libe/liberror-perl/liberrorperl_0.17-1_all.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch httpq://py.archive.ubuntu.com/ubuntu/pool/main/g/git/git-man_1.7.10.4-1ubuntu1_all.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch httpq://py.archive.ubuntu.com/ubuntu/pool/main/g/git/git_1.7.10.4-1ubuntu1_amd64.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch http://py.archive.ubuntu.com/ubuntu/pool/main/g/git/git-core_1.7.10.4-1ubuntu1_all.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? How could I install git on Ubuntu 12.10? I can't even do it from the Ubuntu Software Center. Thanks in advance!

Read the article

Stuck with Apache2

- by Gundars Meness

I cant finish Apache2 install, also cannot remove it. It has blocked my dpkg, now I cant get no installations in or out. I even tried distro upgrade, but it did still has broken dpkg.. How to fix this and get normal Apache2 running? Just for the heck of it: gundars@SR528:~$ sudo apt-get remove apache2-common Reading package lists... Done Building dependency tree Reading state information... Done Package 'apache2-common' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up apache2.2-common (2.2.22-6ubuntu2) ... ERROR: Site default does not exist! dpkg: error processing apache2.2-common (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of apache2-mpm-prefork: apache2-mpm-prefork depends on apache2.2-common (= 2.2.22-6ubuntu2); however: Package apache2.2-common is not configured yet. dpkg: error processing apache2-mpm-prefork (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: apache2.2-common apache2-mpm-prefork E: Sub-process /usr/bin/dpkg returned an error code (1) sudo apt-get -f install apache2 apache2.2-common apache2-mpm-prefork [sudo] password for gundars: Reading package lists... Done Building dependency tree Reading state information... Done apache2 is already the newest version. apache2-mpm-prefork is already the newest version. apache2.2-common is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 4 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up apache2.2-common (2.2.22-6ubuntu2) ... ERROR: Site default does not exist! dpkg: error processing apache2.2-common (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of apache2-mpm-prefork: apache2-mpm-prefork depends on apache2.2-common (= 2.2.22-6ubuntu2); however: Package apache2.2-common is not configured yet. dpkg: error processing apache2-mpm-prefork (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of apache2: apache2 depends on apache2-mpm-worker (= 2.2.22-6ubuntu2) | apache2-mpm-prefork (= 2.2.22-6ubuntu2) | apache2-mpm-event (= 2.2.22-6ubuntu2) | apache2-mpm-itk (= 2.2.22-6ubuntu2); however: Package apache2-mpm-worker is not installed. Package apache2-mpm-prefork is not configured yet. Package apache2-mpm-event is not installed. Package apache2-mpm-itk is not installed. apache2 depends on apache2.2-common (= 2.2.22-6ubuntu2); however: Package apache2.2-common is not configured yet. dpkg: error processing apache2 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libapache2-mod-php5: libapache2-mod-php5 depends on apache2-mpm-prefork (>> 2.0.52) | apache2-mpm-itk; however: Package apache2-mpm-prefork is not configured yet. Package apache2-mpm-itk is not installed. libapache2-mod-php5 depends on apache2.2-common; however: Package apache2.2-common is not configured yet. No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already dpkg: error processing libapache2-mod-php5 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: apache2.2-common apache2-mpm-prefork apache2 libapache2-mod-php5 E: Sub-process /usr/bin/dpkg returned an error code (1)

Search Results

Search found 15115 results on 605 pages for 'state pattern'.

Page 239/605 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246 | Next Page >

- by ipohfly

- by dlfuller

- by ericgorr

- by Jason Fitzpatrick

- by user1824372

- by phlipsy

- by reza_rahman

- by eddyparkinson

- by Andy

- by Omega

- by user946850

- by Rajdeep Siddhapura

- by Iansen

- by Liu Maclean(???)

- by Liu Maclean(???)

- by Bevor

- by fennec

- by niico

- by AeroBuffalo

- by pinaldave

- by pinaldave

- by Lucas Windir

- by Gundars Meness

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246 | Next Page >