Search Results

Search found 24508 results on 981 pages for 'joel test'.

Page 240/981 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

  • Cannot 301 redirect with IIS URL Rewrite Module

    - by Justin
    I am trying to troubleshoot my issue with the URL Rewrite Module on IIS 7. I migrated a Wordpress blog over to BlogEngine.net. There were only about 5 entries that I wanted to use 301 redirects to the new blog, so I wanted to simply create 5 exact match redirect rules using the rewrite module. For some reason the exact match rule never seems to take effect, I always get a 404 error when the original url is navigated to. I verified that my exact match pattern matched the existing backlinks and it does. I then tried a simple test and got the same behavior, no redirection. I created a page, test.html, on my site, I then created a second page, test2.html. So my exact match pattern is: "http://www.mydomain.com/test.html" And the rule is supposed to do a 301 redirect to "http://www.mydomain.com/test2.html " The redirect never happens. I created the steps for the rule based on the instructions in this page: http://learn.iis.net/page.aspx/461/creating-rewrite-rules-for-the-url-rewrite-module/ I don't see that I left out a step. After I apply the rule I've even gone as far as doing an IISReset to make sure it would be in effect but still no luck. Any thoughts on what I might have left out? (Note: my rewrite rules dont include the " " around them but I had to add since serverfault thinks I am trying to spam the system with multiple urls.)

    Read the article

  • Recording screen-casts on another computer

    - by paleozogt
    We're trying to record the desktops of users using demo versions of our software (this is an in-house lab setup). We need to have the recording happen on a separate computer (just across the room), so that the recording software doesn't interfere with the user. Every screen recording software I've seen will only record what's happening on the computer its installed on; ie, you can't record what's happening on another computer. So it seems I need to cobble together a solution (unless anyone knows of software that will do this). Getting the video to the other computer seems easy enough. I'm using TightVNC with the DFMirage driver on the test computer. The recording computer connects to the test computer with TightVNC and then uses CamStudio to record what's happening. The real problem is how to deal with the audio. We need to record both what the user is saying (through a headset mic) as well as the sounds produced by the test computer. But VNC doesn't transmit audio. :( I'm not sure how to get both audio streams (mic and sounds) over to the recording computer. Any ideas?

    Read the article

  • Deploying concrete5 on nginx

    - by Nithin
    I have a concrete5 site that works 'out of the box' in apache server. However I am having a lot of trouble running it in nginx. The following is the nginx configuration i am using: server { root /home/test/public; index index.php; access_log /home/test/logs/access.log; error_log /home/test/logs/error.log; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ index.php; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } # pass the PHP scripts to FastCGI server listening on unix socket # location ~ \.php($|/) { fastcgi_pass unix:/tmp/phpfpm.sock; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_path_info; include fastcgi_params; } location ~ /\.ht { deny all; } } I am able to get the homepage but am having problem with the inner pages. The inner pages display an "Access denied". Possibly the rewrite is not working, in effect I think its querying and trying to execute php files directly instead of going through the concrete dispatcher. I am totally lost here. Thank you for your help, in advance.

    Read the article

  • What command should be used to connect via SSH through squid proxy?

    - by Raul Cardoso
    I have set up a Squid HTTP Proxy (in centOS) and intended to use it also for ssh connections. Managed to configure putty (in a windows client) to use this proxy while connecting by ssh. Confirmed in the "target host" that the ssh connection was coming from Proxy server ip instead of the windows client IP. Used: targethost: 22 for ssh proxyserv: 3128 for proxy (along with proxy credentials) I'm now having problems connecting to the "target host" using Ubuntu and the same proxy server. I have tried the following: me@mycomp:~$ connect-proxy -H test@proxyserv:3128 targethost 22 Enter proxy authentication password for test@proxyserv: SSH-2.0-OpenSSH_6.2p2 Ubuntu-6 It hangs in last line, expecting some input. All attempts resulted in a "Protocol mismatch." error. Putty successfully connects to the http proxy and sends credentials, showing me ssh login right away. - How to do (with commands in Ubuntu) the same putty does? - Is there any other way than connect-proxy command to do this? Edit: Also tried the following with same result ("Protocol mismatch") me@mycomp:~$ connect-proxy -H test@proxyserv:3128 targethost 22 ssh -l myshel_login Thanks in advance Edit: Solution details (thanks to NickW pointing the right way) installed corkscrew and added to ssh_config Host targethost ProxyCommand corkscrew proxyserv 3128 %h %p /etc/ssh/proxypass created proxypass file login:password Restarted ssh and used a simple ssh command ssh mylogin@targethost (ssh password was asked as usual)

    Read the article

  • How can I debug solutions in Visual Studio 2010 from a network share?

    - by alastairs
    I've recently got a new Mac laptop and am running VS2010 in a Parallels virtual machine. It's mostly working out well for me, but I'm having some problems with debugging specific project types, related to the fact that the projects are being accessed via a network share. Test projects don't run because the test runner can't load the tests' DLL. Web projects fail to run in the Visual Studio mini web server, throwing the following exception: 'An error occurred loading a configuration file: Failed to start monitoring changes to path\to\web.config'. I've spent the evening trawling the web with little luck on this. After reading these two posts, I tried out the usual CasPol changes, but then found this post from one of the early VS2010 betas indicating that CasPol is no longer needed/supported in .NET 4.0 and VS2010. The network share is accessible via both a mapped drive and the UNC path. The virtual machine runs its applications under the administrator account, which appears to have all the necessary permissions on the network share to create, read, write and delete files and folders. I say "appears to have" as I can't view the Security Properties of the appropriate folder via Explorer: the Security tab just isn't present. Has anyone managed to successfully load and debug web and test projects from a network share in VS2010?

    Read the article

  • Debian, Apache2, CGI: paths issue

    - by Bubnoff
    I have a perl form email script on the servers cgi-bin directory ( /usr/lib/cgi-bin ). /etc/apache2/sites-enabled/000-default ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch AddHandler cgi-script cgi pl Order allow,deny Allow from all </Directory> The issue is with paths. html calls script here: <form name="Request" method="post" action="http://server-test.local/cgi-bin/formprocessorpro.pl" onsubmit="return checkWholeForm49874(this)"> The directory with the templates and configs is passed here: <input type="hidden" name="base_path" value="../contact" /> The path to this form is: http://server-test.local/formstest/contact.htm No matter what variation I try for the base_path I get an error from the formprocessor script that it can't find the directory: An error occurred when opening the Form Configuration File (../contact/form.cfg): No such file or directory. I need to move this script from an old server, configured by a previous sysadmin, to a new server. Since cgi-bin is automatically linked to /usr/lib/cgi-bin and linked such that the script resides: http://server-test.local/cgi-bin/formprocessorpro.pl I would imagine that, given that the templates are in the webroot in a directory called contact, the correct path would be: ../contact Any ideas? It's been awhile since I've messed with CGI. Bubnoff

    Read the article

  • Cron won't use msmtp to send emails in case of failed cronjob

    - by Glister
    I'm trying to configure a machine so that it will send me an email if one of the cronjobs output something in case of an error. I'm using Debian Wheezy. Cron is working normally (without the email functionality). msmtp is installed and configured. Have already symlinked /usr/{bin|sbin}/sendmail to /usr/bin/msmtp. I can send email by using: echo "test" | mail -s "subject" [email protected] or by executing: echo "test" | /usr/sbin/sendmail Without the symlink (/usr/sbin/sendmail) cron will tell me that: (CRON) info (No MTA installed, discarding output) With the symlinks I get: (root) MAIL (mailed 1 byte of output; but got status 0x004e, #012) Can you suggest how to config the cron/msmtp pair? Thanks! EDIT: Note: I've written "msmtpd" by mistake. Its not a daemon but rather an SMTP client named just "msmtp" (without the "d" ending). It is executed on demand and it is not running in the background all the time. When I try to send an email by using msmtp like that it works: echo "test" | msmtp [email protected] On the far side, in the logs of the SMTP server I read: Nov 2 09:26:10 S01 postfix/smtpd[12728]: connect from unknown[CLIENT_IP] Nov 2 09:26:12 S01 postfix/smtpd[12728]: 532301C318: client=unknown[CLIENT_IP], sasl_method=CRAM-MD5, [email protected] Nov 2 09:26:12 S01 postfix/cleanup[12733]: 532301C318: message-id=<> Nov 2 09:26:12 S01 postfix/qmgr[2404]: 532301C318: from=<[email protected]>, size=191, nrcpt=1 (queue active) Nov 2 09:26:12 S01 postfix/local[12734]: 532301C318: to=<[email protected]>, orig_to=<[email protected]>, relay=local, delay=0.62, delays=0.59/0.01/0/0.03, dsn=2.0.0, status=sent (delivered to command: IFS=' ' && exec /usr/bin/procmail -f- || exit 75 #1001) Nov 2 09:26:12 S01 postfix/qmgr[2404]: 532301C318: removed Nov 2 09:26:13 S01 postfix/smtpd[12728]: disconnect from unknown[CLIENT_IP] And the Email is delivered to the target user. So it looks like that the msmtp client is working properly. It has to be something in the cron/msmtp integration, but I have no clue what that thing might be. Can you help me?

    Read the article

  • CentOS 6 LEMP update - dependency error issue

    - by Latheesan Kanes
    I have setup a LEMP server following the guide Install Nginx/PHP-FPM on Fedora 20/19, CentOS/RHEL 6.5/5.10. It's been a while since I did the setup, so I wanted to grab the latest updates from REMI repository. I ran the following command: yum --enablerepo=remi,remi-php55 update I now get these dependency related errors: # yum --enablerepo=remi update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.nl.leaseweb.net * epel: mirror.1000mbps.com * extras: mirror.nl.leaseweb.net * remi: remi.schlundtech.de * updates: centos.mirror1.spango.com Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package chkconfig.x86_64 0:1.3.49.3-2.el6 will be updated ---> Package chkconfig.x86_64 0:1.3.49.3-2.el6_4.1 will be an update ---> Package glibc.x86_64 0:2.12-1.107.el6_4.4 will be updated ---> Package glibc.x86_64 0:2.12-1.107.el6_4.5 will be an update ---> Package glibc-common.x86_64 0:2.12-1.107.el6_4.4 will be updated ---> Package glibc-common.x86_64 0:2.12-1.107.el6_4.5 will be an update ---> Package gnupg2.x86_64 0:2.0.14-4.el6 will be updated ---> Package gnupg2.x86_64 0:2.0.14-6.el6_4 will be an update ---> Package iputils.x86_64 0:20071127-17.el6_4 will be updated ---> Package iputils.x86_64 0:20071127-17.el6_4.2 will be an update ---> Package kernel.x86_64 0:2.6.32-358.23.2.el6 will be installed ---> Package kernel-firmware.noarch 0:2.6.32-358.18.1.el6 will be updated ---> Package kernel-firmware.noarch 0:2.6.32-358.23.2.el6 will be an update ---> Package libgcrypt.x86_64 0:1.4.5-9.el6_2.2 will be updated ---> Package libgcrypt.x86_64 0:1.4.5-11.el6_4 will be an update ---> Package mysql-libs.x86_64 0:5.1.69-1.el6_4 will be updated --> Processing Dependency: libmysqlclient.so.16()(64bit) for package: 2:postfix-2.6.6-2.2.el6_1.x86_64 --> Processing Dependency: libmysqlclient.so.16(libmysqlclient_16)(64bit) for package: 2:postfix-2.6.6-2.2.el6_1.x86_64 ---> Package mysql-libs.x86_64 0:5.5.34-1.el6.remi will be an update ---> Package nginx.x86_64 0:1.4.2-1.el6.ngx will be updated ---> Package nginx.x86_64 0:1.4.3-1.el6.ngx will be an update ---> Package php-pear.noarch 1:1.9.4-20.el6.remi will be updated ---> Package php-pear.noarch 1:1.9.4-23.el6.remi will be an update ---> Package php-pecl-jsonc.x86_64 0:1.3.2-1.el6.remi.1 will be updated ---> Package php-pecl-jsonc.x86_64 0:1.3.2-2.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 ---> Package php-pecl-mongo.x86_64 0:1.4.3-1.el6.remi.1 will be updated ---> Package php-pecl-mongo.x86_64 0:1.4.4-1.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.3.svn313074.el6.remi.5 will be updated ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.4.svn332053.el6.remi.5.4 will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 ---> Package postgresql-libs.x86_64 0:8.4.13-1.el6_3 will be updated ---> Package postgresql-libs.x86_64 0:8.4.18-1.el6_4 will be an update ---> Package remi-release.noarch 0:6-2.el6.remi will be updated ---> Package remi-release.noarch 0:6.4-1.el6.remi will be an update ---> Package rsync.x86_64 0:3.0.6-9.el6 will be updated ---> Package rsync.x86_64 0:3.0.6-9.el6_4.1 will be an update ---> Package selinux-policy.noarch 0:3.7.19-195.el6_4.12 will be updated ---> Package selinux-policy.noarch 0:3.7.19-195.el6_4.18 will be an update ---> Package selinux-policy-targeted.noarch 0:3.7.19-195.el6_4.12 will be updated ---> Package selinux-policy-targeted.noarch 0:3.7.19-195.el6_4.18 will be an update ---> Package setup.noarch 0:2.8.14-20.el6 will be updated ---> Package setup.noarch 0:2.8.14-20.el6_4.1 will be an update ---> Package tzdata.noarch 0:2013c-2.el6 will be updated ---> Package tzdata.noarch 0:2013g-1.el6 will be an update ---> Package xinetd.x86_64 2:2.3.14-38.el6 will be updated ---> Package xinetd.x86_64 2:2.3.14-39.el6_4 will be an update --> Running transaction check ---> Package compat-mysql51.x86_64 0:5.1.54-1.el6.remi will be installed ---> Package php-pecl-jsonc.x86_64 0:1.3.2-2.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 ---> Package php-pecl-mongo.x86_64 0:1.4.4-1.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.4.svn332053.el6.remi.5.4 will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Finished Dependency Resolution Error: Package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Error: Package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Error: Package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Any idea how to solve these errors? Am I missing a package? or is this a bug?

    Read the article

  • Why are my socks proxies slow

    - by vps_newcomer
    I have a linux vps, and i have tried a few socks proxy setups to test their performance: All tests were using speedtest.net The standard ssh tunnel proxy 0.8mbit/s download and 0.1-0.2mbit/s upload speeds dante-server proxy 1.3mbit/s download and 0.4-0.5mbit/s upload I am wondering why are these speeds so slow? Is anything shaping them? Is it just the nature of socks proxies? I know that the ssh tunnel has to do encryption and what not so that is why its slow, but i was surprised to see that the second setup was also quite slow. On the VPS i have received download speeds of 25MB/s per second (thats about 200mbit/s and upload speed of atleast 5MB/s (haven't got a good enough pipe to test anything faster). The other option i was going to try is to setup OpenVPN and see how that goes, however i need to find a good tutorial as it's fairly complicated to setup. So why is it so slow? How can i test to see where the bottleneck is? How can i make it faster :D

    Read the article

  • Bash script dosn't open in terminal on reboot

    - by twigg
    Quick overview, I have created a script that reboots the laptop after x amount of time and x amount of cycles. I have added the script to the start-up applications and the script does seem to be running in the background but never opens a terminal Window. Am I missing something? Adding Code (this is saved in a file called countdown.sh) #!/bin/bash # check if passed.txt exists if it does, send to soak test if [ -f passed.txt ]; then echo reboot has passed $nol cycles sleep 5; echo Starting soak tests sleep 5; rm testlog.txt; rm passed.txt; phoronix-test-suite run quick-test exit 0; fi # check if file testlog.txt exists if not create it if [ ! -f testlog.txt ]; then echo >> testlog.txt; fi # read reboot file to see how many loops have been completed exec < testlog.txt nol=0 while read line do nol=`expr $nol + 1` done # start the countdown, x is time limit let x=10; while [ $x -gt 0 ]; do clear; figlet "Rebooting in..."; figlet $x; let x-=1; sleep 1; done; echo reboot success $nol >> testlog.txt; shutdown -r now; # set how many times the script should shutdown the laptop reboot_count=1 # if number of reboots matches nol's then stop the script # create a new text file called passed.txt if [ "$nol" == "$reboot_count" ]; then echo reboot passed $nol cycles >> passed.txt; fi

    Read the article

  • Libraries merged folder views

    - by Stigma
    So I pretty much love the Windows 7 Libraries feature, and saw one use for them that I thought would be perfect, but I can't seem to manage it. Basically, a merged view of different folder structures. Suppose I make a new generic library and add three locations to it: C:\Test\, D:\Test\ and D:\temp\Test\. Now, these may look somewhat okay as long as there are no duplicates in these folders. (It wants to group them based on the included directory, which one can work around by looking on google - I don't have the precise trick on hand I am afraid.) But when you get collisions and, say, two of those directories have a Sub directory in them, stuff becomes unusable (assuming Arrange by: Folder view). You'll have multiple folders listed named Sub, which is pretty useless when looking for data. I want folders to get 'merged', which ought to be possible somehow since it can create these merged views based on artist, album etc in other views. So all subdirectories that are double (and recursively checking for doubles inside those, etc) ought to be merged for as far the View is concerned. If files have a collision, I don't really care what happens - hide one, show both, filter out duplicates, whatever. (Although an option would be nice...) Anyhow, is there anyone who knows how to get such a 'merged folder structure' functionality for Libraries? It would be really useful for me.

    Read the article

  • Investigating a potential CPU failure

    - by Jernej
    On a Ubuntu server that I am using for computations I have recently observed that some CPU extensive programs (GUROBI,CPLEX) often segfault. Being in correspondence with tech support of the respective programs I was suggested that it may be a hardware issue. The administrator of the server performed a detailed memtest and it turned out that the RAM modules appear to be fine. Hence I've used the tool mprime to test the CPU and the following two lines appear multiple times durring the execution of the stress tests: [Worker #4 Oct 18 18:47] FATAL ERROR: Rounding was 0.498046875, expected less than 0.4 [Worker #4 Oct 18 18:47] Hardware failure detected, consult stress.txt file. The stress.txt file in itself is not very verbose about what could be the cause of this error so I would like to ask whether anyone here happens to know what could be the cause of this issue? Is there some other test I could perform to nail the problem even further? The temperature of the system (and all cores) was fine during the entire stress test (+69.0°C (high = +80.0°C, crit = +98.0°C)) the CPU in question is a Intel Core i7-2600K CPU @ 3.40GHz and is not overclocked or modified in any way. Also what is interesting that if I run mprime to only stress the CPU all tests pass fine. The error is only triggered when I let mprime stress the CPU+RAM.

    Read the article

  • iptables-restore: line 1 failed

    - by Doug
    Hello, I am new to servers, and I was following this guide and it failed on the first command instructed. Could anyone give me a hand? http://wiki.debian.org/iptables ~ZORO~:/etc# iptables-restore < /etc/iptables.test.rules iptables-restore: line 1 failed Edit: iptables.test.rules ~ZORO~:/etc# cat /etc/iptables.test.rules *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -i ! lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You could modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allows SSH connections for script kiddies # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE -A INPUT -p tcp -m state --state NEW --dport 30000 -j ACCEPT # Now you should read up on iptables rules and consider whether ssh access # for everyone is really desired. Most likely you will only allow access from certain IPs. # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls (access via 'dmesg' command) -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy: -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

    Read the article

  • Restoring Windows 2008 Server X86 and X64

    - by rihatum
    Restoring Windows 2008 Server (Domain Controller) We are using Backup Exec System Recovery 2010 to Image our DC. Now this software has a feature to convert the backup into a vmware or hyper-v VM I have also used disk2vhd to convert one of our dc's to a vhd and when I connected it into Hyper-V, it booted fine, I can login - BUT :-) As soon as I login, I get the activation error, that change product key, this product key isn't good for this machine etc. Question is : When in a real recovery situation, what would be the procedure to restore it either virtual or onto a physical box but be able to login and change product key etc ? In this scenario its just locked down and I cant' do anything, if this is the case, how would I replicate my production environment via these tools ? Any Ideas ? Will be grateful for some real world examples here. Same thing happens with our exchange backup / test restore either physical or virtual, can login but nothing else. Now we don't have the keys as they are OEM keys and just wondering what will happen in a real scenario, would we be purchasing another KEY or using the OEM key on our new server ? This is a test environment I am trying to create by restoring our backups either into hyper-v or physical test machines. Also, If I build up a machine (Server 2008) in a VM (Hyper-V), How can I restore just the system state backup of my DC into it ? will that give me the activation error too ? even though I would use the TRIAL ISOs provided by Microsoft ? Kind regards

    Read the article

  • Stop the constant random reboots of my GIGABYTE GA-B75M-D3V

    - by Frederic
    I've got some issues with a new system. It's rebooting constantly. The system consists of a: brand new: Gigabyte GA-B75M-D3V with F9 BIOS (latest) Intel Core i5-3470 Ivy Bridge 2x 8GB G.SKILL Ripjaws 1600MHz memory (mem-tested x-86) coming from a stable system: Creative Soundcard X-FI Titanium Asus Radeon HD4850 OCZ Vertex 3 120G SSD Sata 3 Hard disk 1TB Sata 2 ASUS Blu-ray Drive PSU 400w Connected peripherals : Toshiba tv (displayport on dvi of MB or HD4850) Wired mouse, wireless keyboard (logitech) Bluetooth usb key Azio main problem : it's not possible to read the errors from the MB. nothing on the manual neither on internet. At the beginning, I received a MB with graphic problems and the problem of rebooting. I RMA'd it. The new one doesn't have any graphic problems. but it's still constantly rebooting. I removed everything except the HD, the sound-card, the blu-ray drive and the wireless keyboard. It's still unexpectdly rebooting. I'm running a test with just the motherboard and the HD. I will update this text after the test. I've got some questions : Somebody have an idea of a test? The PSU could cause that problem? I used it a lot of years with the stable system. Update 1: BTW, if anyone has the same problem, the manual won't say it but you'll need to reset the bios between two tests (the screwdriver on the two pins) if you suspect a problem of compatibility .

    Read the article

  • What is the best way/Software to manage multiple short lived instances of virtual machines ?

    - by Newtopian
    Hi, We have a QA department that have to test our software on multiple combination of OS and DMBS. With Windows spewing out many different versions the combinatorial math of all this can be daunting. So we decided on visualizing our setups but so far it only displaces the problem. The cost of hardware is expensive and we need many different combination far exceeding your server capacity to deliver. Also, these instances are throw away, once the test is complete we no longer need it, furthermore to ensure proper test isolation we should start fresh from a new instance. Lastly we only need a small subset of these system online at any given time. What I am looking for is a way to manage inventory so that our QA staff can order instances to be put online as required and discarded once used. Instances are spawned from a pool of freshly installed systems with the appropriate combination ready to accept our software. It also should be possible for two or more people to start the same instance at the same time, though we could manage without this if it proves too complex to put in place. Finally our budget is pretty thin, we can probably make some purchases but ideally expenditures should be kept to a minimum. To summarize we should be able to : Bring instances online on demand. Ideally should offer queue and scheduling management Destroy instances on demand Keep masters in inventory but not online. Manage large inventory of VMs (30-100 maybe more) with small staff of users (5-10). Allow adding, deleting and changing instances from inventory (bring online, make changes and check back in, or create new and check in). Allow few long lived instances for support tools (normal VM server usage) Thanks for your answers

    Read the article

  • samba joined to AD canot see users when in the security tab on client

    - by Jonathan
    I've got samba joined via kerberos and winbindd to our AD network and user authentication and everything else is working great. However when I try to add users/groups to file permissions it tells me they are not found. All the users groups show up fine with getent so I'm not sure why they are not showing up. Here is my smb.conf and I would much appreciate any help with this. #GLOBAL PARAMETERS [global] socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=11264 SO_SNDBUF=11264 workgroup = [hidden] realm = [hidden] preferred master = no server string = xerxes web/file server security = ADS encrypt passwords = yes log level = 3 log file = /var/log/samba/%m max log size = 50 printcap name = cups printing = cups winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes winbind nested groups = Yes winbind separator = + winbind refresh tickets = yes idmap uid = 1600-20000 idmap gid = 1600-20000 template primary group = "Domain Users" template shell = /bin/bash kerberos method = system keytab nt acl support = yes [homes] comment = Home Direcotries valid users = %S read only = No browseable = No create mask = 0770 directory mask = 0770 force create mode = 0660 force directory mode = 2770 inherit owner = no [test] comment = Test path=/mnt/test writeable=yes valid users = %s create mask = 0770 directory mask = 0770 force create mode = 0660 force directory mode = 2770 inherit owner = no [printers] comment = All Printers path = /var/spool/cups browseable = no printable = yes

    Read the article

  • What does this diagnostic output mean?

    - by ChrisF
    I recently had a fault with my broadband connection. It turned out to be a fault with the ISP's or teleco's equipment. My ISP posted this diagnostic, but while I understand it in general, I'd like to to know more about the details. I'm assuming that ATM means Asynchronous Transfer Mode and PPP means Point to Point Protocol. It was this that my router was indicating as the fault. xDSL Status Test Summary Sync Status: Circuit In Sync General Information NTE Status: NTE Power Status: Unknown Bypass Status: Upstream DSL Link Information Downstream DSL Link Information Loop Loss: 9.0 17.0 SNR Margin: 25 15 Errored Seconds: 0 0 HEC Errors: 0 Cell Count: 0 0 Speed: 448 8128 TAM Status: Successfully executed operation Network Test: Sub-Test Results Layer Name Value Status Modem pass Transmitter Power (Upstream) 12.4 dBm Transmitter Power (Downstream) 8.8 dBm Upstream psd -38 dBm/Hz Downstream psd -51 dBm/Hz DSL pass Equipment Vendor Name TSTC Equipment Vendor Id n/a Equipment Vendor Revision n/a Training Time 8 s Num Syncs 1 Upstream bit rate 448 kbps Downstream bit rate 8128 kbps Upstream maximum bit rate 1108 kbps Downstream maximum bit rate 11744 kbps Upstream Attenuation 3.5 dB Downstream Attenuation 0.0 dB Upstream Noise Margin 20.0 dB Downstream Noise Margin 19.0 dB Local CRC Errors 0 Remote CRC Errors 0 Up Data Path interleaved Down Data Path interleaved Standard Used G_DMT INP INP Upstream Symbols n/a INP Upstream Delay 4 ms INP Upstream Depth 4 INP Downstream Symbols n/a INP Downstream Delay 5 ms INP Downstream Depth 32 ATM Reason: No ATM cells received fail Number of cells transmitted 30 Number of cells received 0 number of Near end HEC errors 0 number of Far end HEC errors n/a PPP Reason: No response from peer fail PAP authentication nottested CHAP authentication nottested (I'm not sure that Super User is the best place to ask this, but two people have suggested I ask it here so here I am).

    Read the article

  • Is there a way to run CUDA applications with the CUDA device being a secondary adapter?

    - by Slartibartfast
    I've been trying to run a CUDA program on a remote computer which has Windows 7 installed. The GPU is GeForce GTX 480. One of the problems I've been facing is that, the computer has two adapters, 1) Standard VGA Adapter 2) NVIDIA GeForce GTX 480 Even though this shows in the device manager. The desktop uses the standard VGA Adapter. I'm assuming this is because the Standard VGA is the primary adapter. Also the device manager shows that the monitor is connected to the standard VGA Adapter. In this scenario if i try to run any CUDA application it fails to recognise a CUDA capable device. Is it necessary for the NVIDIA adapter to be the primary one? Or is there any way to use CUDA when the graphics card is a secondary adapter. I've seen a few posts in the NVIDIA forums on this before, one suggests using another low cost NVIDIA card as the primary adapter, but that is currently not an option. I couldn't find any other solutions. Thanks I tried running the deviceQuery test from the NVIDIA GPU Computing Samples. This was the result i obtained CUDA Device Query (Runtime API) version (CUDART static linking) cudaGetDeviceCount FAILED CUDA Driver and Runtime version may be mismatched FAILED The driver version I'm using is 263.06. The CUDA version is 3.2 I ran the same test on my desktop which also has windows 7 and a GeForce GTX 465. The CUDA toolkit version is 3.2. The driver version was the same and the test passed, although it failed with an older driver.

    Read the article

  • Unable to record using Jmeter: [help me very urgent]

    - by krish
    Hi, I am trying to record a http web page using Jmeter 2.3.3 version.I has setup the JMeter proxy and tried, but did n't work. I have followed the below steps. 1. Launch jmeter 2.3.3, added thred group to test plan 2. Under Workbench-add-non-test elements- added HTTP proxy server. proxy server setting are port:9090, target:use recording controller, grouping:donot group samplers, Type:HTTp request and checked the boxes of all under http sampler settings 3.Saved the settings 4. Now in browser(IE 7.0 or firefox 3.0.16), under connection settings, setup the manual proxy settings as local host and port as 9090(no auto detect settings nothing, only manual proxy). Setting saved 5.Now in the jmeter, started the http proxy server. 6. Open a browser and hit the webpage needs to be tested. The page is not opened. In fact because of the changes made in browsers, no pages are opened. Whenever i try hitting a page, the pages are recorded in the Jmeter. but without the page open, how can i test. I looking for an immediate answer and my work is blocked. Immediate answer would be appreciated.

    Read the article

  • arch openldap authentication failure

    - by nonus25
    I setup the openldap, all look fine but i cant setup authentication, #getent shadow | grep user user:*::::::: tuser:*::::::: tuser2:*::::::: #getent passwd | grep user git:!:999:999:git daemon user:/:/bin/bash user:x:10000:2000:Test User:/home/user/:/bin/zsh tuser:x:10000:2000:Test User:/home/user/:/bin/zsh tuser2:x:10002:2000:Test User:/home/tuser2/:/bin/zsh from root i can login as a one of these users #su - tuser2 su: warning: cannot change directory to /home/tuser2/: No such file or directory 10:24 tuser2@juliet:/root i cant login via ssh also passwd is not working #ldapwhoami -h 10.121.3.10 -D "uid=user,ou=People,dc=xcl,dc=ie" ldap_bind: Server is unwilling to perform (53) additional info: unauthenticated bind (DN with no password) disallowed 10:30 root@juliet:~ #ldapwhoami -h 10.121.3.10 -D "uid=user,ou=People,dc=xcl,dc=ie" -W Enter LDAP Password: ldap_bind: Invalid credentials (49) typed password by me is correct /etc/openldap/slapd.conf access to dn.base="" by * read access to dn.base="cn=Subschema" by * read access to * by self write by users read by anonymous read access to * by dn="uid=root,ou=Roles,dc=xcl,dc=ie" write by users read by anonymous auth access to attrs=userPassword,gecos,description,loginShell by self write access to attrs="userPassword" by dn="uid=root,ou=Roles,dc=xcl,dc=ie" write by anonymous auth by self write by * none access to * by dn="uid=root,ou=Roles,dc=xcl,dc=ie" write by dn="uid=achmiel,ou=People,dc=xcl,dc=ie" write by * search access to attrs=userPassword by self =w by anonymous auth access to * by self write by users read database hdb suffix "dc=xcl,dc=ie" rootdn "cn=root,dc=xcl,dc=ie" rootpw "{SSHA}AM14+..." there are some parts of that conf file /etc/openldap/ldap.conf looks : BASE dc=xcl,dc=ie URI ldap://192.168.10.156/ TLS_REQCERT allow TIMELIMIT 2 so my question is what i am missing that ldap not allow me login by using password ?

    Read the article

  • Can enabling a RAID controller's writeback cache harm overall performance?

    - by Nathan O'Sullivan
    I have an 8 drive RAID 10 setup connected to an Adaptec 5805Z, running Centos 5.5 and deadline scheduler. A basic dd read test shows 400mb/sec, and a basic dd write test shows about the same. When I run the two simultaneously, I see the read speed drop to ~5mb/sec while the write speed stays at more or less the same 400mb/sec. The output of iostat -x as you would expect, shows that very few read transactions are being executed while the disk is bombarded with writes. If i turn the controller's writeback cache off, I dont see a 50:50 split but I do see a marked improvement, somewhere around 100mb/s reads and 300mb/s writes. I've also found if I lower the nr_requests setting on the drive's queue (somewhere around 8 seems optimal) I can end up with 150mb/sec reads and 150mb/sec writes; ie. a reduction in total throughput but certainly more suitable for my workload. Is this a real phenomenon? Or is my synthetic test too simplistic? The reason this could happen seems clear enough, when the scheduler switches from reads to writes, it can run heaps of write requests because they all just land in the controllers cache but must be carried out at some point. I would guess the actual disk writes are occuring when the scheduler starts trying to perform reads again, resulting in very few read requests being executed. This seems a reasonable explanation, but it also seems like a massive drawback to using writeback cache on an system with non-trivial write loads. I've been searching for discussions around this all afternoon and found nothing. What am I missing?

    Read the article

  • Undeliverable e-mail message from [email protected]

    - by QGfisher
    I am responsible for IT for a small charity and we have a problem with a few individuals who e-mail us on our hosted e-mail addresses. The individual is on btconnect and our server is also on BT broadband and using MSExchange. I understand that the message from [email protected] are generated by Exchange but can't tell whether this is a problem with our server (seems unlikely as most people send and receive e-mails perfectly well) or with the sender's server. I have copied a sample test message below and would be very grateful if somebody can explain what is causing this problem. I have * the personal details - hope that's acceptable but I don't want to compromise the individual's identity/security. ----- Original Message ----- From: "System Administrator" To: "****" <****.***@btconnect.com Sent: Tuesday, April 06, 2010 3:26 PM Subject: Undeliverable: Test Message Your message To: ***** Subject: Test Message Sent: Tue, 6 Apr 2010 15:25:59 +0100 did not reach the following recipient(s): ***@quiltersguild.org.uk on Tue, 6 Apr 2010 15:26:07 +0100 The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.

    Read the article

  • Unable to record using Jmeter

    - by krish
    Hi, I am trying to record a http web page using Jmeter 2.3.3 version.I has setup the JMeter proxy and tried, but did n't work. I have followed the below steps. Launch jmeter 2.3.3, added thred group to test plan Under Workbench-add-non-test elements- added HTTP proxy server. proxy server setting are port:9090, target:use recording controller, grouping:donot group samplers, Type:HTTp request and checked the boxes of all under http sampler settings Saved the settings Now in browser(IE 7.0 or firefox 3.0.16), under connection settings, setup the manual proxy settings as local host and port as 9090(no auto detect settings nothing, only manual proxy). Setting saved Now in the jmeter, started the http proxy server. Open a browser and hit the webpage needs to be tested. The page is not opened. In fact because of the changes made in browsers, no pages are opened. Whenever i try hitting a page, the pages are recorded in the Jmeter. but without the page open, how can i test. I looking for an immediate answer and my work is blocked. Immediate answer would be appreciated.

    Read the article

  • Symantec NetBackup restore - Incremental backup

    - by w0051977
    We are using Net Backup as a corporate solution. Incremental backups are taken daily during the week and then a weekly backup is done at the weekend (Saturday). My colleague has restored a folder to how it stood at 14:00 on a Tuesday. The problem is that the restore is taking files from the weekend backup if they did not exist at that point in time of the restore. For example, the folder we are restoring should look like this (this is how it looked on Tuesday at 14:00): Folder1 (folder name) Test.txt Test1.txt Test2.txt The folder looked like this at the weekend when the full restore was done (even though it did exist at the weekend when the full backup ran): Folder1 (folder name) Test.txt Test1.txt Test2.txt Test3.txt The actual folder restored looks like this: Folder1 (folder name) Test.txt Test1.txt Test2.txt Test3.txt Test3.txt should not be restored because it did not exist at the point of the restore. Is there a setting somewhere that we are missing. The folder in question is 200GB - the example above is for simplification. I realise this is a basic question.

    Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >