Search Results

Search found 13891 results on 556 pages for 'maybe homework'.

Page 240/556 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

• Understanding why a 450W power supply is destroying my ATX motherboards but not mATX

  - by T. Webster

  Maybe I'm missing something really obvious here, but after going through 3 new motherboards in trying to build my new machine, I'm finally certain that the 450W power supply I bought has been destroying them. It seems like it should be simple: just connect the connectors where they fit and switch the thing on. But today after hooking it to my ASUS Sabertooth 990FX TUF Series Motherboard and switching it on, I could see and smell the smoke coming out of the motherboard. What I don't get is why I can hook this same 450W power supply up to my mATX motherboard and not run into the same problem. What am I missing here? Where on the box or manual is this? (I have 8x2 GB RAM, AMD FX-4100 3.6GHz CPU, 1 512MB ATI graphics card, 1 WD 7200 RPM SATA hard drive. )

  Read the article

• What does this beep code mean?

  - by Jaspack

  When I wanted to start my laptop today (an Acer Aspire 8920G), the laptop started beeping. I know this beeping is a POST error code, but I can not figure out which one it is. The motherboard of the laptop is manufactured by Phoenix, so I looked up these POST codes: http://www.bioscentral.com/beepcodes/phoenixbeep.htm The beeping is in the form 1-1-1-1 (short beeps, repeating and even without ending), but this code is not mentioned by the manufacturer. Does anybody know what could be the problem? I don't know if it is relevant, but since a couple of months the CMOS battery was degrading. The laptop couldn't keep track of the time. Maybe a failing CMOS battery could be the problem?

  Read the article

• PC is randomly shutting off

  - by Bobby

  I have a PC which is randomly shutting off (the hard way, like someone pulled the plug). It's no heat problem, because this can happen after 2 minutes of operation or after 4 hours and I checked the temperature. It's also no problem of the operation system, because it will also do that while in BIOS. If it happens once, you can be sure that it will happen within the next hour another two or three times, and then it works again for over a week or even longer. Possible causes I've thought about so far are: Voltage Fluctuation Loose contact (already replugged all cables within the PC, no luck) Faulty PSU Maybe someone has more ideas to this? P.s.: I don't have the hardware specs with me right now, I'll post them as soon as I get them.

  Read the article

• How to disable autocmd or augroup in vim?

  - by Andrew Vit

  Given I have a group of commands such as: augroup MyGroup autocmd CursorMoved * silent call MyCommandOne() augroup END I want to disable all the autocommands in MyGroup for a time and then re-enable it later. Is there anything I can do with the group? Specifically, is there a way to disable the whole group at once? If not, what can I do to disable individual commands? Looking at the help, I only see a few options: augroup! will delete the whole group: I don't think this is right since I will want to re-enable it again. (But maybe there's a way to easily redefine the group again?) :noautocmd will only disable the callbacks for a one-off invocation of a command. (And it disables all autocmds, not specified ones) eventignore addresses the event binding, not the command: it sounds like it disables all bound commands for a given event, not just one command or a group I can specify. How is this done?

  Read the article

• Resizing partition in Windows 7: how long does it take?

  - by PaulJ

  Okay, maybe this is me worrying about nothing, but... I have a 500 Gb. external drive where I want to create a second partition. I plug it into my Windows 7 box, use Disk Manager and pick the "Shrink Volume" option. It says that the maximum amount to shrink is around 150 Gb. I hit "OK" and it starts working... and it's been going on for about half an hour. The light of the external HD is constantly working. Disk Manager is greyed out and has the "does not respond" message on the top bar; basically, it's behaving as a non-responding application. Is this normal for a drive of this size, or did the application hang? How long would it typically take for a drive like this to resize its partition?

  Read the article

• Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

  - by BLAU

  My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

  Read the article

• Can I automatically add a new host to known_hosts ?

  - by gareth_bowles

  Here's my situation; I'm setting up a test harness that will, from a central client, launch a number of virtual machine instances and then execute commands on them via SSH. The virtual machines will have previously unused hostnames and IP addresses, so they won't be in the ~/.ssh/known_hosts file on the central client. The problem I'm having is that the first SSH command run against a new virtual instance always comes up with an interactive prompt: The authenticity of host '[hostname] ([IP address])' can't be established. RSA key fingerprint is [key fingerprint]. Are you sure you want to continue connecting (yes/no)? Is there a way that I can bypass this and get the new host to be already known to the client machine, maybe by using a public key that's already baked into the virtual machine image ? I'd really like to avoid having to use Expect or whatever to answer the interactive prompt if I can.

  Read the article

• How to kill all screens that has been up longer then 3 weeks?

  - by Darkmage

  Im creating a script that i am executing every night at 03.00 that will kill all screens that has been running longer than 3 weeks. anyone done anything similar that can help? If you got a script or suggestion to a better method please help by posting :) I was thinking maybe somthing like this. First do a dump to textfile ps -U username -ef | grep SCREEN dump.txt then do a loop running through all lines of dump.txt with a regex and putting pid of the prosseses with STIME 3weeksago in a array. then do a kill loop on the array result.

  Read the article

• Nginx vs Apache as reverse proxy, which one to choose

  - by mhd

  Hi, this kind of question maybe has been asked here but I couldn't find any that really match my question. Heard that nginx performance is quite impressive, but Apache has more docs, community(read:expert) to get help Now what I want to know, how both web servers compare in term of performance, easiness of config, level of customization,etc. AS REVERSE PROXY server in a vps environment?? I'm still weighing between the two for a ruby web app(not ROR) served with thin server. Specific answer will be much appreciated. General answer not touching the ruby part is okay. I'm still noob in web server administration.

  Read the article

• Staggering java linux process startup to prevent OOM

  - by ctennis

  I am running a number of java processes on a single Linux machine. From a memory and computing standpoint, everything is fine when things are static. However, periodically we use a configuration management package up upgrade the jar or war files, and restart the java process. The problem is, that is restarts them all relatively quickly, and so we get 10 or so java VMs restarting all at the same time (we use daemontools for the service stops/starts), which wreaks havoc on the machine, in terms of OOMs or just really slow. This is because it's spawning the JVM 10x at the same time. Other than trying to stagger the startups, is there a smarter way of handling this? Maybe a sysctl tuning performance parameters, or a JVM parameter?

  Read the article

• tail -f updates slowly

  - by Cliff

  I'm not sure why, but on my Macbook Pro running lion I get slow updates when I issue "tail -f" on a log file that is being written to. I used to use this command all the time at my last company but that was typically on Linux machines. The only thing I can think of that would possibly slow the updates are buffering of output and/or maybe a different update interval on a Mac vs. Linux. I've tried with several commands all which write to stout relatively quickly but give slow updates to the tail command. Any ideas? Update I am merely running a python script with a bunch of prints in it and redirecting to a file vi " my output.log". I expect to see updates near real time but that doesn't seem to be the case.

  Read the article

• How to connect to my US network overseas via VPN?

  - by GiH

  I purchased an Apple TV for my parents and I have a netflix account. My parents live overseas, and I was wondering if they could use my account to get it to work. I read that it won't work unless you use proxies or a VPN, so I was wondering if its possible for me to setup a VPN to my network in the US instead of paying a service like StrongVPN? Setup: Router in US - Airport Extreme Router abroad - D-link (not sure of model) I know that the AppleTV doesn't have a built-in VPN client, maybe eventually when its jailbroken there will be an app, but as of now I'll have to use the routers right? Any other ideas are welcome as well!

  Read the article

• setup PXE (i.e. DHCP + TFTP) server on MacOSX

  - by Albert

  What is the easiest way to setup an PXE server (i.e. a DHCP server + TFTP server) on MacOSX? Is there maybe some easy-to-use tool which just comes with both servers builtin? I have done that in the past but I remember that it took me several hours of editing some config files of tftpd (I think) and different versions of dhcpd, many trials and errors until I got it working (mostly). Now I have a fresh MacOSX installation and I want to avoid any complicated setup.

  Read the article

• How to turn off power metering in HP ILO2?

  - by Baron Throw

  I have an issue with all of my RHEL 5.3 servers, where HP iLo2 power meter checks the power draw of the power supply on the server. However this gets passed to the /var/log/messages in our host, and eventually fills up the logs. Anyone have any idea how to completely disable power meter option in iLo? I checked google and iLo2 documentation provided from HP, but found nothing that tells you how to disable it / turn it off. Maybe some CLI command? Im not sure. The message is: Aug 18 10:11:03 KAMIL-SERVER1 ipstor_hwmond: IPSTOR||1408371063||E||11788||sensors||Power Meter = 108.000 Watts [ low=na high=na]

  Read the article

• Will I have internet connection issues next day, if I unplug router at night?

  - by headskracher77

  I did this regularly a few years ago and used to feel like I was 'being punished' by the Interent svc provider for disabling access to my computer, because trying to re-connect the next day became a constant pain. I have the same linksys router, a comcast modem, and hi-speed broadband through their LAN. Question: who or what is at fault for lousy internet connections, slow connections, or no connections: (everybody's tech dept. blames everybody else) The router? 10 year olds, maybe obsolete? The modem? came with the service plan - can connect three devices on a sharedconnection. The ISP: I read they not only even control and completely regulate bandwidth usage, but they also ration it!! (true?) So can I safely 'pull the plug' each night for security or not? thnx

  Read the article

• Check a list of passwords strength

  - by user144705

  Is there any way to check a list of passwords whether they strong or not? I have a list of passwords, around 2000, and want to check them against this policy Password must contain a minimum of eight (8) characters Password must contain at least one letter Password must contain at least one number Password must contain at least one punctuation character And count how many compliant with that policy before we save them. Is there any tool, script or maybe rules in excel to do this instead of doing it manually? Could you please help me?

  Read the article

• Why My Hi-Tech Chemical Compound Lost Its Full Effectiveness?

  - by Boris_yo

  I have bought this thing a month ago: It is so far best dust cleaner that i have ever used and all was well until i left it out of its package for half day. Then it became sturdy and could be torn apart, less sticky and flexible which i video'ed here. Can this item be restored back to fully functioning state as it was before? Maybe it just became dry and i should put it in a place with moisture? Since all was in Chinese, i also do not know the storage conditions that must be met.

  Read the article

• Download rates of torrents through µTorrent and FlashGet are suddenly limited

  - by el

  Both µTorrent and FlashGet are being throttled and I don't know why or how. I use both and they usually report a download speed of 70kbps for torrent speed. FlashGet would report a speed of 70kbps yet actually download at another speed which is about the same as the actual which is a consisten 70kbps. Now, all of a sudden, my torrent downloads are only up to 20kbps. FlashGet still shows a reading of 70kbps, maybe even 80kbps. But, the average actual speed of download is really only 20kbps. I am using Windows 7 on my laptop and no matter where the internet is coming it's the same thing. I have no idea what could be limiting my download rates.

  Read the article

• Need hard disk recommendation for linux home server.

  - by neotracker

  Hello, I'm planing to build a little linux homeserver. It will mainly be used for storage and maybe as an media pc. I plan to build a software raid5 with 4 1.5TB or 2TB hard drives. I already decided to use the Western Digital Caviar Green 1.5 TB drive, but then I read about some problems with the WD green series about many drives failing and that they are not recommended for raid anyway. Of course, I couldn't find much facts on the issues so I thought I just ask here ;-) What hard drives would you recommended for a software raid5 setup? As I only need it for storage, the whole thing doesn't have to be too fast. So I prefer a cheap price and silence to great performance.

  Read the article

• How do I get a new column from a Sharepoint list into Excel?

  - by Jono

  I've been using Excel to process data from a Sharepoint list for a while now. However, I recently added a column to the Sharepoint table, and when I refresh the data in Excel, I don't get the new column. I perform a lot of calculations based on this data, so creating a new worksheet with the "new" Sharepoint list, moving the calculations and the pivots to THAT sheet is more hassle than I'd like to face. Is there a way to force Excel to display this new column that I've added? Maybe by modifying the connection string?

  Read the article

• How do I properly check if a program is a virus/trojan in VMware?

  - by acidzombie24

  How I should check if a program is a virus in VMware? Some programs I do need admin ability to install and it makes sense. But how do I know if it's doing more than I want? Some thoughts are: How many processes open when I launch the application What is added to the startup tab in msconfig If any services are added. That's pretty much all my ideas. Even if it does something I recognize I wouldn't know if it's necessary or not. What are some rule of thumb? -Edit- What about registries, can I use that information to help? Maybe have a scanner tell me if the application I just used has messed with sections (like bootup) it shouldn't have?

  Read the article

• any security tips for my first server? (complete beginner)

  - by Haroldo

  I'm paying for a VPS and hoping to launch my first website on it in the next few days. I'm worried there might be some glaringly obvious security holes in the standard setup, so I'm keen to get some tips About the only thing i know is turn off error reporting in PHP and create users/privilages for MySQL... any more stuff along those lines? I'm using: cpanel and WHM centos 5 php mysql google apps as mail server (so maybe i should disable built in mailer server somehow?!!) This is my first post of Server Fault (i use stack overflow alot), I hope i'm posting this in the right place, with the right tags - please feel free to edit if i'm wrong. Thanks guys!

  Read the article

• vncviewer connection refused (61)

  - by coure2011

  I have a root access to VPS (centos 6). I have installed VNCServer using this guide line http://tournasdimitrios1.wordpress.com/2011/02/02/how-to-setup-vnc-server-on-centos-5-x-fedora-11/ Everything goes perfectly and server is running via termina. Now I am trying to connect to that server via vncviewer (mac os). but its giving me error Connection refused (61) I am providing only the IP address of the VPS, maybe I also needed port address? How to configure port on vncserver? or its something else?

  Read the article

• Forcing Acrobat Reader font

  - by Jack

  Hello, I have a netbook with Linpus Linux and I'm trying to open automatically generated documents with Acrobat Reader that use Verdana but without having it embedded inside the PDF file. Linpus doesn't come natively with any Verdana font so I had to install them inside /usr/share/fonts/by doing mkfontdirand fc-cacheto force a recache of the fonts. Then I've been able to select it inside other programs (eg. OpenOffice) but I'm still unable to open these PDFs. It seems that Acrobat is unable to find the font anyway. Since I have no control on how these PDFs are generated, is there a way to force Acrobat to use a specific font is the one it needs is unfound? Or maybe Acrobat needs a different kind of font configuration on Linux? Thanks in advance

  Read the article

• Quick change of SSH tunnel port forwarding options for SOCKS proxy

  - by user1335897

  The goal is to have access to internet thru SSH tunneling to SOCKS proxy. Me - ssh-on-my-vps - SOCKS proxy - internet Thing is I want to be able to quickly change the SOCKS proxy in this chain. If I use port forwarding on ssh, I assume I have to re-establish SSH tunnel with new SOCKS proxy address in parameters whenever I want to change proxy. Is that right? If it is, then I probably should always point SSH tunnel to localhost listening proxy server which will send requests to specified SOCKS proxy. So what local proxy I should choose that allows to easily change the destination SOCKS proxy via maybe reading from local file where I would put the SOCKS proxy address or via specifying new SOCKS address in its web-admin page?

  Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >