Search Results

Search found 6942 results on 278 pages for 'enabled'.

Page 242/278 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

• NDepend 4 – First Steps

  - by Ricardo Peres

  Introduction Thanks to Patrick Smacchia I had the chance to test NDepend 4. I can only say: awesome! This will be the first of a series of posts on NDepend, where I will talk about my discoveries. Keep in mind that I am just starting to use it, so more experienced users may find these too basic, I just hope I don’t say anything foolish! I must say that I am in no way affiliated with NDepend and I never actually met Patrick. Installation No installation program – a curious decision, I’m not against it -, just unzip the files to a folder and run the executable. It will optionally register itself with Visual Studio 2008, 2010 and 11 as well as RedGate’s Reflector; also, it automatically looks for updates. NDepend can either be used as a stand-alone program (with or without a GUI) or from within Visual Studio or Reflector. Getting Started One thing that really pleases me is the Getting Started section of the stand-alone, with links to pages on NDepend’s web site, featuring detailed explanations, which usually include screenshots and small videos (<5 minutes). There’s also an How do I with hierarchical navigation that guides us to through the major features so that we can easily find what we want. Usage There are two basic ways to use NDepend: Analyze .NET solutions, projects or assemblies; Compare two versions of the same assembly. I have so far not used NDepend to compare assemblies, so I will first talk about the first option. After selecting a solution and some of its projects, it generates a single HTML page with an highly detailed report of the analysis it produced. This includes some metrics such as number of lines of code, IL instructions, comments, types, methods and properties, the calculation of the cyclomatic complexity, coupling and lots of others indicators, typically grouped by type, namespace and assembly. The HTML also includes some nice diagrams depicting assembly dependencies, type and method relative proportions (according to the number of IL instructions, I guess) and assembly analysis relating to abstractness and stability. Useful, I would say. Then there’s the rules; NDepend tests the target assemblies against a set of more than 120 rules, grouped in categories Code Quality, Object Oriented Design, Design, Architecture and Layering, Dead Code, Visibility, Naming Conventions, Source Files Organization and .NET Framework Usage. The full list can be configured on the application, and an explanation of each rule can be found on the web site. Rules can be validated, violated and violated in a critical manner, and the HTML will contain the violated rules, their queries – more on this later - and results. The HTML uses some nice JavaScript effects, which allow paging and sorting of tables, so its nice to use. Similar to the rules, there are some queries that display results for a number (about 200) questions grouped as Object Oriented Design, API Breaking Changes (for assembly version comparison), Code Diff Summary (also for version comparison) and Dead Code. The difference between queries and rules is that queries are not classified as passes, violated or critically violated, just present results. The queries and rules are expressed through CQLinq, which is a very powerful LINQ derivative specific to code analysis. All of the included rules and queries can be enabled or disabled and new ones can be added, with intellisense to help. Besides the HTML report file, the NDepend application can be used to explore all analysis results, compare different versions of analysis reports and to run custom queries. Comparison to Other Analysis Tools Unlike StyleCop, NDepend only works with assemblies, not source code, so you can’t expect it to be able to enforce brackets placement, for example. It is more similar to FxCop, but you don’t have the option to analyze at the IL level, that is, other that the number of IL instructions and the complexity. What’s Next In the next days I’ll continue my exploration with a real-life test case. References The NDepend web site is http://www.ndepend.com/. Patrick keeps an updated blog on http://codebetter.com/patricksmacchia/ and he regularly monitors StackOverflow for questions tagged NDepend, which you can find on http://stackoverflow.com/questions/tagged/ndepend. The default list of CQLinq rules, queries and statistics can be found at http://www.ndepend.com/DefaultRules/webframe.html. The syntax itself is described at http://www.ndepend.com/Doc_CQLinq_Syntax.aspx and its features at http://www.ndepend.com/Doc_CQLinq_Features.aspx.

  Read the article

• texture mapping with lib3ds and SOIL help

  - by Adam West

  I'm having trouble with my project for loading a texture map onto a model. Any insight into what is going wrong with my code is fantastic. Right now the code only renders a teapot which I have assinged after creating it in 3DS Max. 3dsloader.cpp #include "3dsloader.h" Object::Object(std:: string filename) { m_TotalFaces = 0; m_model = lib3ds_file_load(filename.c_str()); // If loading the model failed, we throw an exception if(!m_model) { throw strcat("Unable to load ", filename.c_str()); } // set properties of texture coordinate generation for both x and y coordinates glTexGeni(GL_S, GL_TEXTURE_GEN_MODE, GL_EYE_LINEAR); glTexGeni(GL_T, GL_TEXTURE_GEN_MODE, GL_EYE_LINEAR); // if not already enabled, enable texture generation if(! glIsEnabled(GL_TEXTURE_GEN_S)) glEnable(GL_TEXTURE_GEN_S); if(! glIsEnabled(GL_TEXTURE_GEN_T)) glEnable(GL_TEXTURE_GEN_T); } Object::~Object() { if(m_model) // if the file isn't freed yet lib3ds_file_free(m_model); //free up memory glDisable(GL_TEXTURE_GEN_S); glDisable(GL_TEXTURE_GEN_T); } void Object::GetFaces() { m_TotalFaces = 0; Lib3dsMesh * mesh; // Loop through every mesh. for(mesh = m_model->meshes;mesh != NULL;mesh = mesh->next) { // Add the number of faces this mesh has to the total number of faces. m_TotalFaces += mesh->faces; } } void Object::CreateVBO() { assert(m_model != NULL); // Calculate the number of faces we have in total GetFaces(); // Allocate memory for our vertices and normals Lib3dsVector * vertices = new Lib3dsVector[m_TotalFaces * 3]; Lib3dsVector * normals = new Lib3dsVector[m_TotalFaces * 3]; Lib3dsTexel* texCoords = new Lib3dsTexel[m_TotalFaces * 3]; Lib3dsMesh * mesh; unsigned int FinishedFaces = 0; // Loop through all the meshes for(mesh = m_model->meshes;mesh != NULL;mesh = mesh->next) { lib3ds_mesh_calculate_normals(mesh, &normals[FinishedFaces*3]); // Loop through every face for(unsigned int cur_face = 0; cur_face < mesh->faces;cur_face++) { Lib3dsFace * face = &mesh->faceL[cur_face]; for(unsigned int i = 0;i < 3;i++) { memcpy(&texCoords[FinishedFaces*3 + i], mesh->texelL[face->points[ i ]], sizeof(Lib3dsTexel)); memcpy(&vertices[FinishedFaces*3 + i], mesh->pointL[face->points[ i ]].pos, sizeof(Lib3dsVector)); } FinishedFaces++; } } // Generate a Vertex Buffer Object and store it with our vertices glGenBuffers(1, &m_VertexVBO); glBindBuffer(GL_ARRAY_BUFFER, m_VertexVBO); glBufferData(GL_ARRAY_BUFFER, sizeof(Lib3dsVector) * 3 * m_TotalFaces, vertices, GL_STATIC_DRAW); // Generate another Vertex Buffer Object and store the normals in it glGenBuffers(1, &m_NormalVBO); glBindBuffer(GL_ARRAY_BUFFER, m_NormalVBO); glBufferData(GL_ARRAY_BUFFER, sizeof(Lib3dsVector) * 3 * m_TotalFaces, normals, GL_STATIC_DRAW); // Generate a third VBO and store the texture coordinates in it. glGenBuffers(1, &m_TexCoordVBO); glBindBuffer(GL_ARRAY_BUFFER, m_TexCoordVBO); glBufferData(GL_ARRAY_BUFFER, sizeof(Lib3dsTexel) * 3 * m_TotalFaces, texCoords, GL_STATIC_DRAW); // Clean up our allocated memory delete vertices; delete normals; delete texCoords; // We no longer need lib3ds lib3ds_file_free(m_model); m_model = NULL; } void Object::applyTexture(const char*texfilename) { float imageWidth; float imageHeight; glGenTextures(1, & textureObject); // allocate memory for one texture textureObject = SOIL_load_OGL_texture(texfilename,SOIL_LOAD_AUTO,SOIL_CREATE_NEW_ID,SOIL_FLAG_MIPMAPS); glPixelStorei(GL_UNPACK_ALIGNMENT,1); glBindTexture(GL_TEXTURE_2D, textureObject); // use our newest texture glGetTexLevelParameterfv(GL_TEXTURE_2D,0,GL_TEXTURE_WIDTH,&imageWidth); glGetTexLevelParameterfv(GL_TEXTURE_2D,0,GL_TEXTURE_HEIGHT,&imageHeight); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); // give the best result for texture magnification glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); //give the best result for texture minification glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP); // don't repeat texture glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); // don't repeat textureglTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); // don't repeat texture glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE,GL_MODULATE); glTexImage2D(GL_TEXTURE_2D,0,GL_RGB,imageWidth,imageHeight,0,GL_RGB,GL_UNSIGNED_BYTE,& textureObject); } void Object::Draw() const { // Enable vertex, normal and texture-coordinate arrays. glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_NORMAL_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); // Bind the VBO with the normals. glBindBuffer(GL_ARRAY_BUFFER, m_NormalVBO); // The pointer for the normals is NULL which means that OpenGL will use the currently bound VBO. glNormalPointer(GL_FLOAT, 0, NULL); glBindBuffer(GL_ARRAY_BUFFER, m_TexCoordVBO); glTexCoordPointer(2, GL_FLOAT, 0, NULL); glBindBuffer(GL_ARRAY_BUFFER, m_VertexVBO); glVertexPointer(3, GL_FLOAT, 0, NULL); // Render the triangles. glDrawArrays(GL_TRIANGLES, 0, m_TotalFaces * 3); glDisableClientState(GL_VERTEX_ARRAY); glDisableClientState(GL_NORMAL_ARRAY); glDisableClientState(GL_TEXTURE_COORD_ARRAY); } 3dsloader.h #include "main.h" #include "lib3ds/file.h" #include "lib3ds/mesh.h" #include "lib3ds/material.h" class Object { public: Object(std:: string filename); virtual ~Object(); virtual void Draw() const; virtual void CreateVBO(); void applyTexture(const char*texfilename); protected: void GetFaces(); unsigned int m_TotalFaces; Lib3dsFile * m_model; Lib3dsMesh* Mesh; GLuint textureObject; GLuint m_VertexVBO, m_NormalVBO, m_TexCoordVBO; }; Called in the main cpp file with: VBO,apply texture and draw (pretty simple, how ironic) and thats it, please help me forum :)

  Read the article

• MySQL for Excel 1.1.0 GA has been released

  - by Javier Treviño

  The MySQL Windows Experience Team is proud to announce the release of MySQL for Excel version 1.1.0 GA, one of our newest products contained in the MySQL Installer suite. You can download it from our official Downloads page at http://dev.mysql.com/downloads/installer/. The 1.1.0 release of MySQL for Excel introduces the following features: Edit MySQL Data. Edit MySQL Data This may be the coolest feature so far; users will be able to edit the data in a MySQL table using MS Excel in a very friendly and intuitive way.  Edit Data supports inserting new rows, deleting existing rows and updating existing data as easy as playing with data in an Excel’s spreadsheet and pushing changes back to the server.  Also this version contains the following bug fixes: Enabled the following checkboxes in the Append Data's Advanced Options dialog and added code in the Append Data dialog to use the checkboxes as follows: Automatically store the column mapping for the given table     If checked the current mapping will be stored automatically after clicking the Append button if the append operation is successful and there is no mapping for the current connection.schema.table already; the new mapping is stored with a proposed name of Mapping. Reload stored column mapping for the selected table automatically     If checked the first Stored Mapping found where all column names in the source grid match all column names in the target grid is automatically selected and applied when the Append Data dialog is loaded. Fixed code in Append Data that applies a stored column mapping to skip target columns where the associated mapping is empty (saved as a -1). Enclosed the Add-In's startup code in a try-catch block in order to log any possible error thrown during startup; and added information messages to the log at the beginning of the Add-In's startup code and at the end of the shutdown code.  Also changed the wrapper method that calls the MySQLUtility to write messages to the log to make logging easier, thus changed the log call throughout all the code that contains a try-catch block. Added code to the main wix configuration file to check if a newer version is already installed and if so abort the installation Fixed code to refresh the Import Procedure Form's preview grid's data source to repaint its contents every time the Call button is pressed. Added code to re-pull connections after connections are migrated from Excel to Workbench. Fixed code so when the Append Data's Automatic Mapping is performed any subsequent change on a mapping resets the mapping to a Manual Mapping. Added code to the InfoDialog class to set the button text to "Show Details" or "Hide Details" depending on the status of the Details text container. Fixed a GUID in the main wix configuration file so now previous versions are uninstalled during a new installation. Added an option to the Export Data's Advanced Options dialog to remove columns with no data, by default the Export Dialog will only flag those columns as Excluded. Added code to display a warning and paint a column red if the column name in the Export Data dialog is not set, display a warning if the table name is not set, and stack warnings but not display them if a column is Excluded, warnings are displayed normally for columns if they are not Excluded anymore.  Added code to prevent the Append and Export of Data if more than 1 selection is made (selecting more than 1 area holding the Ctrl key while selecting Excel cells). Fixed problem that prevented MySQL for Excel from loading when Display settings in Windows 7 is set to Adjust to Best Performance (Oracle bug 14521405 - UNHANDLED EXCEPTION IS THROWN WHEN LOADING MYSQL FOR EXCEL). Fixed code that renames the auto-generated Primary Key column when the Table name changes since it was not detecting if a column with the same name already existed in the table. The column duplication was not actually happening, it looked that way because the automatically generated PK column was not detecting a column had that same name. Fixed code in Export Data dialog to always set an empty string instead of null to the MySQLDataColumn properties that stores MySQL data types (MySQLDataType, RowsFrom1stDataType and RowsFrom2ndDataType). Added code to display a warning and color red a column which Data Type has not been set by the user or has been manually cleared. Added code to output to the application log exception messages consistently in all places where exceptions are catched. A series of blog posts explaining the new Edit MySQL Data feature and the other existing features are coming in this blog. You can access the MySQL for Excel documentation at http://dev.mysql.com/doc/refman/5.5/en/mysql-for-excel.html You can also post questions on our MySQL for Excel forum found at http://forums.mysql.com/. You can also post questions on our MySQL for Excel forum found at http://forums.mysql.com/. Enjoy and thanks for the support!

  Read the article

• Announcing the New Windows Azure Web Sites Shared Scaling Tier

  - by Clint Edmonson

  Windows Azure Web Sites has added a new pricing tier that will solve the #1 blocker for the web development community. The shared tier now supports custom domain names mapped to shared-instance web sites. This post will outline the plan changes and elaborate on how the new pricing model makes Windows Azure Web Sites an even richer option for web development shops of all sizes. Free Shared Reserved # of Sites 10 100 100 Egress 165MB/Day 5GB/Month Included 5GB/Month Included Storage 1GB 1GB 10GB Throttling CPU/Memory/Egress CPU/Memory Unlimited Price Free $.02/hr per site, per instance $.08/hr per core Setting the Stage In June, we released the first public preview of Windows Azure Web Sites, which gave web developers a great platform on which to get web sites running using their web development framework of choice. PHP, Node.js, classic ASP, and ASP.NET developers can all utilize the Windows Azure platform to create and launch their web sites. Likewise, these developers have a series of data storage options using Windows Azure SQL Databases, MySQL, or Windows Azure Storage. The Windows Azure Web Sites free offer enabled startups to get their site up and running on Windows Azure with a minimal investment, and with multiple deployment and continuous integration features such as Git, Team Foundation Services, FTP, and Web Deploy.  The response to the Windows Azure Web Sites offer has been overwhelmingly positive. Since the addition of the service on June 12th, tens of thousands of web sites have been deployed to Windows Azure and the volume of adoption is increasing every week. Preview Feedback In spite of the growth and success of the product, the community has had questions about features lacking in the free preview offer. The main question web developers asked regarding Windows Azure Web Sites relates to the lack of the free offer’s support for domain name mapping. During the preview launch period, customer feedback made it obvious that the lack of domain name mapping support was an area of concern. We’re happy to announce that this #1 request has been delivered as a feature of the new shared plan. New Shared Tier Portal Features In the screen shot below, the “Scale” tab in the portal shows the new tiers – Free, Shared, and Reserved – and gives the user the ability to quickly move any of their free web sites into the shared tier. With a single mouse-click, the user can move their site into the shared tier. Once a site has been moved into the shared tier, a new Manage Domains button appears in the bottom action bar of the Windows Azure Portal giving site owners the ability to manage their domain names for a shared site. This button brings up the domain-management dialog, which can be used to enter in a specific domain name that will be mapped to the Windows Azure Web Site. Shared Tier Benefits Startups and large web agencies will both benefit from this plan change. Here are a few examples of scenarios which fit the new pricing model: Startups no longer have to select the reserved plan to map domain names to their sites. Instead, they can use the free option to develop their sites and choose on a site-by-site basis which sites they elect to move into the shared plan, paying only for the sites that are finished and ready to be domain-mapped Agencies who manage dozens of sites will realize a lower cost of ownership over the long term by moving their sites into reserved mode. Once multi-site companies reach a certain price point in the shared tier, it is much more cost-effective to move sites to a reserved tier.  Long-term, it’s easy to see how the new Windows Azure Web Sites shared pricing tier makes Windows Azure Web Sites it a great choice for both startups and agency customers, as it enables rapid growth and upgrades while keeping the cost to a minimum. Large agencies will be able to have all of their sites in their own instances, and startups will have the capability to scale up to multiple-shared instances for minimal cost and eventually move to reserved instances without worrying about the need to incur continually additional costs. Customers can feel confident they have the power of the Microsoft Windows Azure brand and our world-class support, at prices competitive in the market. Plus, in addition to realizing the cost savings, they’ll have the whole family of Windows Azure features available. Continuous Deployment from GitHub and CodePlex Along with this new announcement are two other exciting new features. I’m proud to announce that web developers can now publish their web sites directly from CodePlex or GitHub.com repositories. Once connections are established between these services and your web sites, Windows Azure will automatically be notified every time a check-in occurs. This will then trigger Windows Azure to pull the source and compile/deploy the new version of your app to your web site automatically. Walk-through videos on how to perform these functions are below: Publishing to an Azure Web Site from CodePlex Publishing to an Azure Web Site from GitHub.com These changes, as well as the enhancements to the reserved plan model, make Windows Azure Web Sites a truly competitive hosting option. It’s never been easier or cheaper for a web developer to get up and running. Check out the free Windows Azure web site offering and see for yourself. Stay tuned to my twitter feed for Windows Azure announcements, updates, and links: @clinted

  Read the article

• Microsoft TechEd 2010 - Day 2 @ Bangalore

  - by sathya

  Microsoft TechEd 2010 - Day 2 @ Bangalore Today is the day 2 @ Microsoft TechEd 2010. We had lot of technical sessions as usual there were many tracks going on side by side and I was attending the Web simplified track, Which comprised of the following sessions :   Developing a scalable Media Application using ASP.NET MVC - This was a kind of little advanced stuff. Anyways I couldn't understand much because this was not my piece of cake and I havent worked on this before ASP.Net MVC Unplugged - This was really great because this session covered from the basics of MVC showing what is Model,View and Controller and how it worked and the speaker went into the details of the same. Building RESTful Applications with the Open Data Protocol - There were some concepts explained about this from the basics on how to build RESTful Services and it went on till some advanced configurations of the same. Developing Scalable Web Applications with AppFabric Caching - This session showed about the integration of AppFabric with the .Net Web Applications. Instead of using Inproc Sessions, we can use this AppFabric as a substitute for Caching and outofProc Session Storage without writing code and doing a little bit of configurations which brings in High Scalability, performance to our applications. (But unfortunately there were no demos for this session ) Deep Dive : WCF RIA Services - This session was also an interactive one, in this the speaker presented from the basics of WCF and took a Book Store Application as a sample and explained all details concepts on linking with RIA Services   Apart from these sessions, in between there happened some small events in the breaks like Some discussions about Technology, Innovations Music Jokes Mimicry, etc. And on doing all these things, the developers were given some kool gifts / goodies like USBs, T-Shirts, etc. And today I got a chance to do the following certification : (70-562) Microsoft Certified Technology Specialist in .NET 3.5 Web Applications Since I already have an MCTS in .NET 2.0, I wanted to do an MCPD and for doing the same I was required to do an update to my MCTS with the .NET 3.5 framework and I did the same I cleared it and now am an MCTS in .NET 3.5 Web Apps And on doing this I got a T-Shirt and they gave something called Learning $ of worth 30$. And in various stalls for attending each quiz or some game or some referrals we got some Learning $ which we can redeem later based on our Total Learning $. I got 105 $ which i was able to redeem and got a Microsoft Learning BagPack, 1 free Microsoft certification offer, a laptop light and an e-learning content activated. And after all these sessions and small events, we had something called Demo Extravaganza like I mentioned yesterday. This was a great funfilled event with lot of goodies for the attendees. There were some lucky draw which enabled 2 attendees to get Netbooks (Sponsored by Intel) and 1 attendee to get X-box (Sponsored by Citrix). After Choosing the raffle in the lucky draw they kept it on a device called Microsoft Surface which is a kind of big touch screen device and on putting the raffle on that it detected the code of the attendee and said intelligently how many sessions that person has attended and if he has attended more than 5 he got a Netbook and this was coded by a guy called Imran. Apart from they showed demos on : Research by 2 Tamilnadu students from Krishna Arts and Science college, taken 1200 photographs of their college from different angles and put that up in Bing maps using silverlight and linked with Photosynth, which showed a 3d view of their college based on the photos they uploaded Reasearch by Microsoft on Panaramic HD views of the images. One young guy from Microsoft Research showed a demo of this on Srivilliputhur Andal Temple, in Tamil Nadu and its history with a panoramic view of the temple and the near by places with narration of the historical information on the same and with the videos embedded in it with high definition images which we can zoom to a very detailed level. Some Demo on a business app with Silverlight, Business Intelligence (BI) and maps integrated. It showed the sales of a particular product across locations. Some kool demos by 2 geeks who used Robots to show their development talents. 2 Robots fought with each other 2 Robots danced in sync for the A.R. Rehman song Humma Humma... A dream home project by Raman. He is currently using the same in his home too. Robots are controlling his home currently. They showed a video on this. Here are the list of activities that Robot does for him When he reads a book, robot automatically scans that and shows that image of that person in the screen (TV or comp) in front of him. It shows a wikipedia about that person. It says that person is not in linked in. do you want to add him If he sees an IPL Match news in the book and smiles it understands he is interested in that and opens a website related to that and shows the current game and the scorecard. It cooks for him It cleans the room for him whenever he leaves the house when he is doing something if some intruder comes inside his house his computer automatically switches his screen showing the video of the person coming inside. When he wakes up it automatically opens up the system, loads his mails and the news by the side, etc. Some Demos on Microsoft Pivot. This was there in livelabs but it is now available in getpivot.com its a pivoting of the pictorial data based on some categories and filters on the searches that we do. And finally on filling up some feedback forms we got T-Shirts and Microsoft Visual Studio 2010 Training Kit CDs. Whats more on TechEd??? Stay tuned!!! Will update you soon on the other happenings!! PS : I typed a lot of content for more than a hour but I pressed a backspace and it went to the previous page and all my content were lost and I was not able to retrieve the same and I typed everything again.

  Read the article

• Stumbling Through: Making a case for the K2 Case Management Framework

  I have recently attended a three-day training session on K2s Case Management Framework (CMF), a free framework built on top of K2s blackpearl workflow product, and I have come away with several different impressions for some of the different aspects of the framework.  Before we get into the details, what is the Case Management Framework?  It is essentially a suite of tools that, when used together, solve many common workflow scenarios.  The tool has been developed over time by K2 consultants that have realized they tend to solve the same problems over and over for various clients, so they attempted to package all of those common solutions into one framework.  Most of these common problems involve workflow process that arent necessarily direct and would tend to be difficult to model.  Such solutions could be achieved in blackpearl alone, but the workflows would be complex and difficult to follow and maintain over time.  CMF attempts to simplify such scenarios not so much by black-boxing the workflow processes, but by providing different points of entry to the processes allowing them to be simpler, moving the complexity to a middle layer.  It is not a solution in and of itself, development is still required to tie the pieces together. CMF is under continuous development, both a plus and a minus in that bugs are fixed quickly and features added regularly, but it may be difficult to know which versions are the most stable.  CMF is not an officially supported K2 product, which means you will not get technical support but you will get access to the source code. The example given of a business process that would fit well into CMF is that of a file cabinet, where each folder in said file cabinet is a case that contains all of the data associated with one complaint/customer/incident/etc. and various users can access that case at any time and take one of a set of pre-determined actions on it.  When I was given that example, my first thought was that any workflow I have ever developed in the past could be made to fit this model there must be more than just this model to help decide if CMF is the right solution.  As the training went on, we learned that one of the key features of CMF is SharePoint integration as each case gets a SharePoint site created for it, and there are a number of excellent web parts that can be used to design a portal for users to get at all the information on their cases.  While CMF does not require SharePoint, without it you will be missing out on a huge portion of functionality that CMF offers.  My opinion is that without SharePoint integration, you may as well write your workflows and other components the old fashioned way. When I heard that each case gets its own SharePoint site created for it, warning bells immediately went off in my head as I felt that depending on the data load, a CMF enabled solution could quickly overwhelm SharePoint with thousands of sites so we have yet another deciding factor for CMF:  Just how many cases will your solution be creating?  While it is not necessary to use the site-per-case model, it is one of the more useful parts of the framework.  Without it, you are losing a big chunk of what CMF has to offer. When it comes to developing on top of the Case Management Framework, it becomes a matter of configuring what makes up a case, what can be done to a case, where each action on a case should take the user, and then typing up actions to case statuses.  This last step is one that I immediately warmed up to, as just about every workflow Ive designed in the past needed some sort of mapping table to set the status of a work item based on the action being taken definitely one of those common solutions that it is good to see rolled up into a re-useable entity (and it gets a nice configuration UI to boot!).  This concept is a little different than traditional workflow design, in that you dont have to think of an end-to-end process around passing a case along a path, rather, you must envision the case as central object with workflow threads branching off of it and doing their own thing with the case data.  Certainly there can be certain workflow threads that get rather complex, but the idea is that they RELATE to the case, they dont BECOME the case (though it is still possible with action->status mappings to prevent certain actions in certain cases, so it isnt always a wide-open free for all of actions on a case). I realize that this description of the Case Management Framework merely scratches the surface on what the product actually can do, and I dont think Ive conclusively defined for what sort of business scenario you can make a case for Case Management Framework.  What I do hope to have accomplished with this post is to raise awareness of CMF there is a (free!) product out there that could potentially simplify a tangled workflow process and give (for free!) a very useful set of SharePoint web parts and a nice set of (free!) reports.  The best way to see if it will truly fit your needs is to give it a try did I mention it is FREE?  Er, ok, so it is free, but only obtainable at this time for K2 partnersDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Exadata Parameter _AUTO_MANAGE_EXADATA_DISKS

  - by AVargas

  Normal 0 false false false EN-US X-NONE HE MicrosoftInternetExplorer4 DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Exadata auto disk management is controlled by the parameter _AUTO_MANAGE_EXADATA_DISKS. The default value for this parameter is TRUE.When _AUTO_MANAGE_EXADATA_DISKS is enabled, Exadata automate the following disk operations:If a griddisk becomes unavailable/available, ASM will OFFLINE/ONLINE it.If a physicaldisk fails or its status change to predictive failure, for all griddisks built on it ASM will DROP FORCE the failed ones and DROP the ones with predictive failures.If a flashdisk performance degrades, if there are griddisks built on it, they will be DROPPED FORCE in ASM.If a physicaldisk is replaced, the celldisk and griddisks will be recreated and the griddisks will be automatically ADDED in ASM, if they were automatically dropped by ASM. If you manually drop the disks, that will not happen.If a NORMAL, ONLINE griddisk is manually dropped, FORCE option should not be used, otherwise the disk will be automatically added back in ASM. If a gridisk is inactivated, ASM will automatically OFFLINE it.If a gridisk is activated, ASM will automatically ONLINED it. There are some error conditions that may require to temporarily disable _AUTO_MANAGE_EXADATA_DISKS.Details on MOS 1408865.1 - Exadata Auto Disk Management Add disk failing and ASM Rebalance interrupted with error ORA-15074. Immediately after taking care of the problem _AUTO_MANAGE_EXADATA_DISKS should be set back to its default value of TRUE. Full details on Auto disk management feature in Exadata (Doc ID 1484274.1)

  Read the article

• Kendo UI Mobile with Knockout for Master-Detail Views

  - by Steve Michelotti

  Lately I’ve been playing with Kendo UI Mobile to build iPhone apps. It’s similar to jQuery Mobile in that they are both HTML5/JavaScript based frameworks for buildings mobile apps. The primary thing that drew me to investigate Kendo UI was its innate ability to adaptively render a native looking app based on detecting the device it’s currently running on. In other words, it will render to look like a native iPhone app if it’s running on an iPhone and it will render to look like a native Droid app if it’s running on a Droid. This is in contrast to jQuery Mobile which looks the same on all devices and, therefore, it can never quite look native for whatever device it’s running on. My first impressions of Kendo UI were great. Using HTML5 data-* attributes to define “roles” for UI elements is easy, the rendering looked great, and the basic navigation was simple and intuitive. However, I ran into major confusion when trying to figure out how to “correctly” build master-detail views. Since I was already very family with KnockoutJS, I set out to use that framework in conjunction with Kendo UI Mobile to build the following simple scenario: I wanted to have a simple “Task Manager” application where my first screen just showed a list of tasks like this:   Then clicking on a specific task would navigate to a detail screen that would show all details of the specific task that was selected:   Basic navigation between views in Kendo UI is simple. The href of an <a> tag just needs to specify a hash tag followed by the ID of the view to navigate to as shown in this jsFiddle (notice the href of the <a> tag matches the id of the second view):   Direct link to jsFiddle: here. That is all well and good but the problem I encountered was: how to pass data between the views? Specifically, I need the detail view to display all the details of whichever task was selected. If I was doing this with my typical technique with KnockoutJS, I know exactly what I would do. First I would create a view model that had my collection of tasks and a property for the currently selected task like this: 1: function ViewModel() { 2: var self = this; 3: self.tasks = ko.observableArray(data); 4: self.selectedTask = ko.observable(null); 5: } Then I would bind my list of tasks to the unordered list - I would attach a “click” handler to each item (each <li> in the unordered list) so that it would select the “selectedTask” for the view model. The problem I found is this approach simply wouldn’t work for Kendo UI Mobile. It completely ignored the click handlers that I was trying to attach to the <a> tags – it just wanted to look at the href (at least that’s what I observed). But if I can’t intercept this, then *how* can I pass data or any context to the next view? The only thing I was able to find in the Kendo documentation is that you can pass query string arguments on the view name you’re specifying in the href. This enabled me to do the following: Specify the task ID in each href – something like this: <a href=”#taskDetail?id=3></a> Attach an “init method” (via the “data-show” attribute on the details view) that runs whenever the view is activated Inside this “init method”, grab the task ID passed from the query string to look up the item from my view model’s list of tasks in order to set the selected task I was able to get all that working with about 20 lines of JavaScript as shown in this jsFiddle. If you click on the Results tab, you can navigate between views and see the the detail screen is correctly binding to the selected item:   Direct link to jsFiddle: here.   With all that being done, I was very happy to get it working with the behavior I wanted. However, I have no idea if that is the “correct” way to do it or if there is a “better” way to do it. I know that Kendo UI comes with its own data binding framework but my preference is to be able to use (the well-documented) KnockoutJS since I’m already familiar with that framework rather than having to learn yet another new framework. While I think my solution above is probably “acceptable”, there are still a couple of things that bug me about it. First, it seems odd that I have to loop through my items to *find* my selected item based on the ID that was passed on the query string - normally, with Knockout I can just refer directly to my selected item from where it was used. Second, it didn’t feel exactly right that I had to rely on the “data-show” method of the details view to set my context – normally with Knockout, I could just attach a click handler to the <a> tag that was actually clicked by the user in order to set the “selected item.” I’m not sure if I’m being too picky. I know there are many people that have *way* more expertise in Kendo UI compared to me – I’d be curious to know if there are better ways to achieve the same results.

  Read the article

• Explaining Explain Plan Notes for Auto DOP

  - by jean-pierre.dijcks

  I've recently gotten some questions around "why do I not see a parallel plan" while Auto DOP is on (I think)...? It is probably worthwhile to quickly go over some of the ways to find out what Auto DOP was thinking. In general, there is no need to go tracing sessions and look under the hood. The thing to start with is to do an explain plan on your statement and to look at the parameter settings on the system. Parameter Settings to Look At First and foremost, make sure that parallel_degree_policy = AUTO. If you have that parameter set to LIMITED you will not have queuing and we will only do the auto magic if your objects are set to default parallel (so no degree specified). Next you want to look at the value of parallel_degree_limit. It is typically set to CPU, which in default settings equates to the Default DOP of the system. If you are testing Auto DOP itself and the impact it has on performance you may want to leave it at this CPU setting. If you are running concurrent statements you may want to give this some more thoughts. See here for more information. In general, do stick with either CPU or with a specific number. For now avoid the IO setting as I've seen some mixed results with that... In 11.2.0.2 you should also check that IO Calibrate has been run. Best to simply do a: SQL> select * from V$IO_CALIBRATION_STATUS; STATUS        CALIBRATION_TIME ------------- ---------------------------------------------------------------- READY         04-JAN-11 10.04.13.104 AM You should see that your IO Calibrate is READY and therefore Auto DOP is ready. In any case, if you did not run the IO Calibrate step you will get the following note in the explain plan: Note -----    - automatic DOP: skipped because of IO calibrate statistics are missing One more note on calibrate_io, if you do not have asynchronous IO enabled you will see:  ERROR at line 1: ORA-56708: Could not find any datafiles with asynchronous i/o capability ORA-06512: at "SYS.DBMS_RMIN", line 463 ORA-06512: at "SYS.DBMS_RESOURCE_MANAGER", line 1296 ORA-06512: at line 7 While this is changed in some fixes to the calibrate procedure, you should really consider switching asynchronous IO on for your data warehouse. Explain Plan Explanation To see the notes that are shown and explained here (and the above little snippet ) you can use a simple explain plan mechanism. There should  be no need to add +parallel etc. explain plan for <statement> SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY()); Auto DOP The note structure displaying why Auto DOP did not work (with the exception noted above on IO Calibrate) is like this: Automatic degree of parallelism is disabled: <reason> These are the reason codes: Parameter -  parallel_degree_policy = manual which will not allow Auto DOP to kick in  Hint - One of the following hints are used NOPARALLEL, PARALLEL(1), PARALLEL(MANUAL) Outline - A SQL outline of an older version (before 11.2) is used SQL property restriction - The statement type does not allow for parallel processing Rule-based mode - Instead of the Cost Based Optimizer the system is using the RBO Recursive SQL statement - The statement type does not allow for parallel processing pq disabled/pdml disabled/pddl disabled - For some reason (alter session?) parallelism is disabled Limited mode but no parallel objects referenced - your parallel_degree_policy = LIMITED and no objects in the statement are decorated with the default PARALLEL degree. In most cases all objects have a specific degree in which case Auto DOP will honor that degree. Parallel Degree Limited When Auto DOP does it works you may see the cap you imposed with parallel_degree_limit showing up in the note section of the explain plan: Note -----    - automatic DOP: Computed Degree of Parallelism is 16 because of degree limit This is an obvious indication that your are being capped for this statement. There is one quite interesting one that happens when you are being capped at DOP = 1. First of you get a serial plan and the note changes slightly in that it does not indicate it is being capped (we hope to update the note at some point in time to be more specific). It right now looks like this: Note -----    - automatic DOP: Computed Degree of Parallelism is 1 Dynamic Sampling With 11.2.0.2 you will start seeing another interesting change in parallel plans, and since we are talking about the note section here, I figured we throw this in for good measure. If we deem the parallel (!) statement complex enough, we will enact dynamic sampling on your query. This happens as long as you did not change the default for dynamic sampling on the system. The note looks like this: Note ----- - dynamic sampling used for this statement (level=5)

  Read the article

• why installing lame it is getting failed

  - by Rahul Mehta

  I want to install ffmpeg with mp3lame enabled for this m following this tutorial , http://ubuntuforums.org/showpost.php?p=9868359&postcount=1289 and in step 2 error is libfaac is not found ? and in step 5 installing lame is giving this error , why it is getting failed , please advised what to do ? reach121@youngib:~/lame-3.98.4$ sudo checkinstall --pkgname=lame-ffmpeg --pkgversion="3.98.4" --backup=no --default --deldoc=yes checkinstall 1.6.2, Copyright 2009 Felipe Eduardo Sanchez Diaz Duran This software is released under the GNU GPL. ***************************************** **** Debian package creation selected *** ***************************************** This package will be built according to these values: 0 - Maintainer: [ root@youngib ] 1 - Summary: [ Package created with checkinstall 1.6.2 ] 2 - Name: [ lame-ffmpeg ] 3 - Version: [ 3.98.4 ] 4 - Release: [ 1 ] 5 - License: [ GPL ] 6 - Group: [ checkinstall ] 7 - Architecture: [ amd64 ] 8 - Source location: [ lame-3.98.4 ] 9 - Alternate source location: [ ] 10 - Requires: [ ] 11 - Provides: [ lame-ffmpeg ] 12 - Conflicts: [ ] 13 - Replaces: [ ] Enter a number to change any of them or press ENTER to continue: Installing with make install... ========================= Installation results =========================== Making install in mpglib make[1]: Entering directory `/home/reach121/lame-3.98.4/mpglib' make[2]: Entering directory `/home/reach121/lame-3.98.4/mpglib' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/reach121/lame-3.98.4/mpglib' make[1]: Leaving directory `/home/reach121/lame-3.98.4/mpglib' Making install in libmp3lame make[1]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame' Making install in i386 make[2]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame/i386' make[3]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame/i386' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame/i386' make[2]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame/i386' Making install in vector make[2]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame/vector' make[3]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame/vector' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame/vector' make[2]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame/vector' make[2]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame' make[3]: Entering directory `/home/reach121/lame-3.98.4/libmp3lame' test -z "/usr/local/lib" || /bin/mkdir -p "/usr/local/lib" /bin/bash ../libtool --mode=install /usr/bin/install -c 'libmp3lame.la' '/usr/local/lib/libmp3lame.la' /usr/bin/install -c .libs/libmp3lame.lai /usr/local/lib/libmp3lame.la /usr/bin/install -c .libs/libmp3lame.a /usr/local/lib/libmp3lame.a chmod 644 /usr/local/lib/libmp3lame.a ranlib /usr/local/lib/libmp3lame.a PATH="$PATH:/sbin" ldconfig -n /usr/local/lib ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame' make[2]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame' make[1]: Leaving directory `/home/reach121/lame-3.98.4/libmp3lame' Making install in frontend make[1]: Entering directory `/home/reach121/lame-3.98.4/frontend' make[2]: Entering directory `/home/reach121/lame-3.98.4/frontend' test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin" /bin/bash ../libtool --mode=install /usr/bin/install -c 'lame' '/usr/local/bin/lame' /usr/bin/install -c lame /usr/local/bin/lame make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/reach121/lame-3.98.4/frontend' make[1]: Leaving directory `/home/reach121/lame-3.98.4/frontend' Making install in Dll make[1]: Entering directory `/home/reach121/lame-3.98.4/Dll' make[2]: Entering directory `/home/reach121/lame-3.98.4/Dll' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/reach121/lame-3.98.4/Dll' make[1]: Leaving directory `/home/reach121/lame-3.98.4/Dll' Making install in debian make[1]: Entering directory `/home/reach121/lame-3.98.4/debian' make[2]: Entering directory `/home/reach121/lame-3.98.4/debian' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/reach121/lame-3.98.4/debian' make[1]: Leaving directory `/home/reach121/lame-3.98.4/debian' Making install in doc make[1]: Entering directory `/home/reach121/lame-3.98.4/doc' Making install in html make[2]: Entering directory `/home/reach121/lame-3.98.4/doc/html' make[3]: Entering directory `/home/reach121/lame-3.98.4/doc/html' make[3]: Nothing to be done for `install-exec-am'. test -z "/usr/local/share/doc/lame/html" || /bin/mkdir -p "/usr/local/share/doc/lame/html" /bin/mkdir: cannot create directory `/usr/local/share/doc': No such file or directory make[3]: *** [install-pkghtmlDATA] Error 1 make[3]: Leaving directory `/home/reach121/lame-3.98.4/doc/html' make[2]: *** [install-am] Error 2 make[2]: Leaving directory `/home/reach121/lame-3.98.4/doc/html' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/reach121/lame-3.98.4/doc' make: *** [install-recursive] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. reach121@youngib:~/lame-3.98.4$

  Read the article

• WebCenter Content shared folders for clustering

  - by Kyle Hatlestad

  When configuring a WebCenter Content (WCC) cluster, one of the things which makes it unique from some other WebLogic Server applications is its requirement for a shared file system.  This is actually not any different then 10g and previous versions of UCM when it ran directly on a JVM.  And while it is simple enough to say it needs a shared file system, there are some crucial details in how those directories are configured. And if they aren't followed, you may result in some unwanted behavior. This blog post will go into the details on how exactly the file systems should be split and what options are required. Beyond documents being stored on the file system and/or database and metadata being stored in the database along with other structured data, there is other information being read and written to on the file system.  Information such as user profile preferences, workflow item state information, metadata profiles, and other details are stored in files.  In addition, for certain processes within WCC, each of the nodes needs to know what the other nodes are doing so they don’t step on each other.  WCC keeps track of this through the use of lock files on the file system.  Because of this, each node of the WCC must have access to the same file system just as they have access to the same database. WCC uses its own locking mechanism using files, so it also needs to have access to those files without file attribute caching and without locking being done by the client (node).  If one of the nodes accesses a certain status file and it happens to be cached, that node might attempt to run a process which another node is already working on.  Or if a particular file is locked by one of the node clients, this could interfere with access by another node.  Unfortunately, when disabling file attribute caching on the file share, this can impact performance.  So it is important to only disable caching and locking on the particular folders which require it.  When configuring WebCenter Content after deploying the domain, it asks for 3 different directories: Content Server Instance Folder, Native File Repository Location, and Weblayout Folder.  And starting in PS5, it now asks for the User Profile Folder. Even if you plan on storing the content in the database, you still need to establish a Native File (Vault) and Weblayout directories.  These will be used for handling temporary files, cached files, and files used to deliver the UI. For these directories, the only folder which needs to have the file attribute caching and locking disabled is the ‘Content Server Instance Folder’.  So when establishing this share through NFS or a clustered file system, be sure to specify those options. For instance, if creating the share through NFS, use the ‘noac’ and ‘nolock’ options for the mount options. For the other directories, caching and locking should be enabled to provide best performance to those locations.   These directory path configurations are contained within the <domain dir>\ucm\cs\bin\intradoc.cfg file: #Server System PropertiesIDC_Id=UCM_server1 #Server Directory Variables IdcHomeDir=/u01/fmw/Oracle_ECM1/ucm/idc/ FmwDomainConfigDir=/u01/fmw/user_projects/domains/base_domain/config/fmwconfig/ AppServerJavaHome=/u01/jdk/jdk1.6.0_22/jre/ AppServerJavaUse64Bit=true IntradocDir=/mnt/share_no_cache/base_domain/ucm/cs/ VaultDir=/mnt/share_with_cache/ucm/cs/vault/ WeblayoutDir=/mnt/share_with_cache/ucm/cs/weblayout/ #Server Classpath variables #Additional Variables #NOTE: UserProfilesDir is only available in PS5 – 11.1.1.6.0UserProfilesDir=/mnt/share_with_cache/ucm/cs/data/users/profiles/ In addition to these folder configurations, it’s also recommended to move node-specific folders to local disk to avoid unnecessary traffic to the shared directory.  So on each node, go to <domain dir>\ucm\cs\bin\intradoc.cfg and add these additional configuration entries: VaultTempDir=<domain dir>/ucm/<cs>/vault/~temp/ TraceDirectory=<domain dir>/servers/<UCM_serverN>/logs/EventDirectory=<domain dir>/servers/<UCM_serverN>/logs/event/ And of course, don’t forget the cluster-specific configuration values to add as well.  These can be added through Admin Server -> General Configuration -> Additional Configuration Variables or directly in the <IntradocDir>/config/config.cfg file: ArchiverDoLocks=true DisableSharedCacheChecking=true ServiceAllowRetry=true    (use only with Oracle RAC Database)PublishLockTimeout=300000  (time can vary depending on publishing time and number of nodes) For additional information and details on clustering configuration, I highly recommend reviewing document [1209496.1] on the support site.  In addition, there is a great step-by-step guide on setting up a WebCenter Content cluster [1359930.1].

  Read the article

• Deep in the Heart of Texas

  - by Applications User Experience

  Author: Erika Webb, Manager, Fusion Applications UX User Assistance When I was first working in the usability field, the only way I could consider conducting a usability study was to bring a potential user to a lab environment where I could show them whatever I was interested in learning more about and ask them questions. While I hate to reveal just how long I have been working in this field, let's just say that pads of paper and a stopwatch were key tools for any test I conducted. Over the years, I have worked in simple labs with basic video taping equipment and not much else, and I have worked in corporate environments with sophisticated usability labs and state-of-the-art equipment. Years ago, we conducted all usability studies at the location of the user. If we wanted to see if there were any differences between users in New York, Chicago, and Los Angeles, we went to those places to run the test. A lab environment is very useful for many test situations. However, there has always been a debate in the usability field about whether bringing someone into a lab environment, however friendly we make it, somehow intrinsically changes the behavior of the user as compared to having them work in their own environment, at their own desk, and on their own computer. We developed systems to create a portable usability lab, so that we could go to the users that we needed to test.  Do lab environments change user behavior patterns? Then 9/11 hit. You may not remember, but no planes flew for weeks afterwards. Companies all over the world couldn't fly-in employees for meetings. Suddenly, traveling to the location of the users had an additional difficulty. The company I was working for at the time had usability specialists stuck in New York for days before they could finally rent a car and drive home to Colorado. This changed the world pretty suddenly, and technology jumped on the change. Companies offering Internet meeting tools were strugglinguntil no one could travel. The Internet boomed with collaboration tools that enabled people to work together wherever they happened to be. This change in technology has made a huge difference in my world. We use collaborative tools to bring our product concepts and ideas to the user across the Internet. As a global company, we benefit from having users from all over the world inform our designs. We now run usability studies with users all over the world in a single day, a feat we couldn't have accomplished 10 years ago by plane! Other technology companies have started to do more of this type of usability testing, since the tools have improved so dramatically. Plus, in our busy world, it's not always easy to find users who can take the time away from their jobs to come to our labs. reaching users where it is convenient for them greatly improves the odds that people do participate. I manage a team of usability specialists who live in India and California, whlie I live in Colorado. We have wonderful labs that we bring users into to show them our products. But very often, we run our studies remotely. We used to take the lab to the users now we use the labs, but we let the users stay where they are. We gain users who might not have been able to leave work to come to our labs, and they get to use the system they are familiar with. And we gain users nearly anywhere that we can set up an Internet connection, as long as the users have a phone, a broadband connection, and a compatible Web browser (with no pop-up blockers). After we recruit participants in a traditional manner, we send them an invitation to participate through the use of a telephone conference call and Web conferencing tool. At Oracle, we use Oracle Web Conference part of Oracle Collaboration Suite, which enables us to give the user control of the mouse, while we present a prototype or wireframe pictures. We can record the sessions over the Web and phone conference. We send the users instructions, plus tips to ensure that we won't have problems sharing screens. In some cases, when time is tight, we even run a five-minute "test session" with users a day in advance to be sure that we can connect. Prior to the test, we send users a participant script that contains information about the study, including any questionnaires. This is exactly the same script we give to participants who come to the labs. We ask users to print this before the beginning of the session. We generally run these studies by having a usability engineer in our usability labs, so that we can record the session as though the user were in the lab with us. Roughly 80% of our application software usability testing at Oracle is performed using remote methods. The probability of getting a   remote test participant decreases the higher up the person is in the target organization. We have a methodology checklist available to help our usability engineers work through the remote processes.

  Read the article

• RDA Health Checks for SOA

  - by ShawnBailey

  What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• Telerik is First to Announce Support for Microsoft Silverlight Analytics Framework

  Yesterday at MIX 10 conference Microsoft announced the Microsoft Silverlight Analytics Framework Beta. The Silverlight Analytics Framework (SAF) is a new open-source framework to allow designers and developers to integrate web analytics into Silverlight applications in a consistent manner. Supporting out-of-browser and offline scenarios, Microsoft built this framework in conjunction with a number of web analytics services and control vendors to support multiple analytics services simultaneously without degrading application performance. Because the SAF is enabled as a set of behaviors in Microsoft Expression Blend, designers and developers can visually instrument their designs and configure A/B testing rapidly without writing any code. Telerik is proud to be the first control vendor to support the Silverlight Analytics Framework. RadControls for Silverlight can be used with the framework out of the box. The suite offers Silverlight Analytics Framework handlers and behavior, helping developers to fine tune the values sent to the analytics providers. Because the analytics framework is using the Managed Extensibility Framework (MEF) for composition, you don't need to change the way you use the controls to benefit from the Telerik handlers. Just add a reference to the Telerik assemblies that contains the handlers. Here is the code that you need to declare to use RadTreeView: <UserControl x:Class="Telerik.SLAF.MainPage"         xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"         xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"         xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"         xmlns:ga="clr-namespace:Google.WebAnalytics;assembly=Google.WebAnalytics"         xmlns:sa="clr-namespace:Microsoft.WebAnalytics.Behaviors;assembly=Microsoft.WebAnalytics.Behaviors"         xmlns:ic="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions"         xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"         xmlns:telerikNavigation="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation">        <Grid x:Name="LayoutRoot">         <i:Interaction.Behaviors>             <ga:GoogleAnalytics ProfileId="--Your GA ProfileId" Category="Demo" />         </i:Interaction.Behaviors>         <telerikNavigation:RadTreeView>             <i:Interaction.Triggers>                 <i:EventTrigger EventName="SelectionChanged">                     <sa:TrackAction />                 </i:EventTrigger>             </i:Interaction.Triggers>             <telerikNavigation:RadTreeViewItem Header="Item1">             </telerikNavigation:RadTreeViewItem>             <telerikNavigation:RadTreeViewItem Header="Item2" />             <telerikNavigation:RadTreeViewItem Header="Item3" />         </telerikNavigation:RadTreeView>     </Grid> </UserControl> Download the Telerik Microsoft Silverlight Analytics Framework Handlers and the sample project. This is our first Beta release - please drop us a line with any feedback you have or even better if you are at MIX10 - come visit us at the booth in the "Commons" hall so we can discuss it in person. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Simple iOS glDrawElements - BAD_ACCESS

  - by user699215

  You can copy paste this into the default OpenGl template created in Xcode. Why am I not seeing anything :-) It is strange as the glDrawArrays(GL_TRIANGLES, 0, 3); is working fine, but with glDrawElements(GL_TRIANGLE_STRIP, sizeof(indices)/sizeof(GLubyte), GL_UNSIGNED_BYTE, indices); Is giving BAD_ACCESS? Copy paste this into Xcode default OpenGl template: ViewController #import "ViewController.h" #define BUFFER_OFFSET(i) ((char *)NULL + (i)) // Uniform index. enum { UNIFORM_MODELVIEWPROJECTION_MATRIX, UNIFORM_NORMAL_MATRIX, NUM_UNIFORMS }; GLint uniforms[NUM_UNIFORMS]; // Attribute index. enum { ATTRIB_VERTEX, ATTRIB_NORMAL, NUM_ATTRIBUTES }; @interface ViewController () { GLKMatrix4 _modelViewProjectionMatrix; GLKMatrix3 _normalMatrix; float _rotation; GLuint _vertexArray; GLuint _vertexBuffer; NSArray* arrayOfVertex; } @property (strong, nonatomic) EAGLContext *context; @property (strong, nonatomic) GLKBaseEffect *effect; - (void)setupGL; - (void)tearDownGL; @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; self.context = [[EAGLContext alloc] initWithAPI:kEAGLRenderingAPIOpenGLES2]; GLKView *view = (GLKView *)self.view; view.context = self.context; view.drawableDepthFormat = GLKViewDrawableDepthFormat24; [self setupGL]; } - (void)dealloc { [self tearDownGL]; if ([EAGLContext currentContext] == self.context) { [EAGLContext setCurrentContext:nil]; } } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; if ([self isViewLoaded] && ([[self view] window] == nil)) { self.view = nil; [self tearDownGL]; if ([EAGLContext currentContext] == self.context) { [EAGLContext setCurrentContext:nil]; } self.context = nil; } // Dispose of any resources that can be recreated. } GLuint vertexBufferID; GLuint indexBufferID; static const GLfloat vertices[9] = { -0.5, -0.5, 0.5, 0.5, -0.5, 0.5, -0.5, 0.5, 0.5 }; static const GLubyte indices[3] = { 0, 1, 2 }; - (void)setupGL { [EAGLContext setCurrentContext:self.context]; // [self loadShaders]; self.effect = [[GLKBaseEffect alloc] init]; self.effect.light0.enabled = GL_TRUE; self.effect.light0.diffuseColor = GLKVector4Make(1.0f, 0.4f, 0.4f, 1.0f); glEnable(GL_DEPTH_TEST); // glGenVertexArraysOES(1, &_vertexArray); // glBindVertexArrayOES(_vertexArray); glGenBuffers(1, &vertexBufferID); glBindBuffer(GL_ARRAY_BUFFER, vertexBufferID); glBufferData(GL_ARRAY_BUFFER, sizeof(vertices), vertices, GL_STATIC_DRAW); glGenBuffers(1, &indexBufferID); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, indexBufferID); glBufferData(GL_ELEMENT_ARRAY_BUFFER, sizeof(indices), indices, GL_STATIC_DRAW); glEnableVertexAttribArray(GLKVertexAttribPosition); glVertexAttribPointer(GLKVertexAttribPosition, // Specifies the index of the generic vertex attribute to be modified. 3, // Specifies the number of components per generic vertex attribute. Must be 1, 2, 3, 4. GL_FLOAT, // GL_FALSE, // 0, // BUFFER_OFFSET(0)); // // glBindVertexArrayOES(0); } - (void)tearDownGL { [EAGLContext setCurrentContext:self.context]; glDeleteBuffers(1, &_vertexBuffer); glDeleteVertexArraysOES(1, &_vertexArray); self.effect = nil; } #pragma mark - GLKView and GLKViewController delegate methods - (void)update { float aspect = fabsf(self.view.bounds.size.width / self.view.bounds.size.height); GLKMatrix4 projectionMatrix = GLKMatrix4MakePerspective(GLKMathDegreesToRadians(65.0f), aspect, 0.1f, 100.0f); self.effect.transform.projectionMatrix = projectionMatrix; GLKMatrix4 baseModelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, -4.0f); baseModelViewMatrix = GLKMatrix4Rotate(baseModelViewMatrix, _rotation, 0.0f, 1.0f, 0.0f); // Compute the model view matrix for the object rendered with GLKit GLKMatrix4 modelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, -1.5f); modelViewMatrix = GLKMatrix4Rotate(modelViewMatrix, _rotation, 1.0f, 1.0f, 1.0f); modelViewMatrix = GLKMatrix4Multiply(baseModelViewMatrix, modelViewMatrix); self.effect.transform.modelviewMatrix = modelViewMatrix; // Compute the model view matrix for the object rendered with ES2 modelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, 1.5f); modelViewMatrix = GLKMatrix4Rotate(modelViewMatrix, _rotation, 1.0f, 1.0f, 1.0f); modelViewMatrix = GLKMatrix4Multiply(baseModelViewMatrix, modelViewMatrix); _normalMatrix = GLKMatrix3InvertAndTranspose(GLKMatrix4GetMatrix3(modelViewMatrix), NULL); _modelViewProjectionMatrix = GLKMatrix4Multiply(projectionMatrix, modelViewMatrix); _rotation += self.timeSinceLastUpdate * 0.5f; } int i; - (void)glkView:(GLKView *)view drawInRect:(CGRect)rect { glClearColor(0.65f, 0.65f, 0.65f, 1.0f); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // glBindVertexArrayOES(_vertexArray); // Render the object with GLKit [self.effect prepareToDraw]; //glDrawArrays(GL_TRIANGLES, 0, 3); // Render the object again with ES2 // glDrawArrays(GL_TRIANGLES, 0, 3); glDrawElements(GL_TRIANGLE_STRIP, sizeof(indices)/sizeof(GLubyte), GL_UNSIGNED_BYTE, indices); } @end

  Read the article

• How to Achieve Real-Time Data Protection and Availabilty....For Real

  - by JoeMeeks

  There is a class of business and mission critical applications where downtime or data loss have substantial negative impact on revenue, customer service, reputation, cost, etc. Because the Oracle Database is used extensively to provide reliable performance and availability for this class of application, it also provides an integrated set of capabilities for real-time data protection and availability. Active Data Guard, depicted in the figure below, is the cornerstone for accomplishing these objectives because it provides the absolute best real-time data protection and availability for the Oracle Database. This is a bold statement, but it is supported by the facts. It isn’t so much that alternative solutions are bad, it’s just that their architectures prevent them from achieving the same levels of data protection, availability, simplicity, and asset utilization provided by Active Data Guard. Let’s explore further. Backups are the most popular method used to protect data and are an essential best practice for every database. Not surprisingly, Oracle Recovery Manager (RMAN) is one of the most commonly used features of the Oracle Database. But comparing Active Data Guard to backups is like comparing apples to motorcycles. Active Data Guard uses a hot (open read-only), synchronized copy of the production database to provide real-time data protection and HA. In contrast, a restore from backup takes time and often has many moving parts - people, processes, software and systems – that can create a level of uncertainty during an outage that critical applications can’t afford. This is why backups play a secondary role for your most critical databases by complementing real-time solutions that can provide both data protection and availability. Before Data Guard, enterprises used storage remote-mirroring for real-time data protection and availability. Remote-mirroring is a sophisticated storage technology promoted as a generic infrastructure solution that makes a simple promise – whatever is written to a primary volume will also be written to the mirrored volume at a remote site. Keeping this promise is also what causes data loss and downtime when the data written to primary volumes is corrupt – the same corruption is faithfully mirrored to the remote volume making both copies unusable. This happens because remote-mirroring is a generic process. It has no  intrinsic knowledge of Oracle data structures to enable advanced protection, nor can it perform independent Oracle validation BEFORE changes are applied to the remote copy. There is also nothing to prevent human error (e.g. a storage admin accidentally deleting critical files) from also impacting the remote mirrored copy. Remote-mirroring tricks users by creating a false impression that there are two separate copies of the Oracle Database. In truth; while remote-mirroring maintains two copies of the data on different volumes, both are part of a single closely coupled system. Not only will remote-mirroring propagate corruptions and administrative errors, but the changes applied to the mirrored volume are a result of the same Oracle code path that applied the change to the source volume. There is no isolation, either from a storage mirroring perspective or from an Oracle software perspective.  Bottom line, storage remote-mirroring lacks both the smarts and isolation level necessary to provide true data protection. Active Data Guard offers much more than storage remote-mirroring when your objective is protecting your enterprise from downtime and data loss. Like remote-mirroring, an Active Data Guard replica is an exact block for block copy of the primary. Unlike remote-mirroring, an Active Data Guard replica is NOT a tightly coupled copy of the source volumes - it is a completely independent Oracle Database. Active Data Guard’s inherent knowledge of Oracle data block and redo structures enables a separate Oracle Database using a different Oracle code path than the primary to use the full complement of Oracle data validation methods before changes are applied to the synchronized copy. These include: physical check sum, logical intra-block checking, lost write validation, and automatic block repair. The figure below illustrates the stark difference between the knowledge that remote-mirroring can discern from an Oracle data block and what Active Data Guard can discern. An Active Data Guard standby also provides a range of additional services enabled by the fact that it is a running Oracle Database - not just a mirrored copy of data files. An Active Data Guard standby database can be open read-only while it is synchronizing with the primary. This enables read-only workloads to be offloaded from the primary system and run on the active standby - boosting performance by utilizing all assets. An Active Data Guard standby can also be used to implement many types of system and database maintenance in rolling fashion. Maintenance and upgrades are first implemented on the standby while production runs unaffected at the primary. After the primary and standby are synchronized and all changes have been validated, the production workload is quickly switched to the standby. The only downtime is the time required for user connections to transfer from one system to the next. These capabilities further expand the expectations of availability offered by a data protection solution beyond what is possible to do using storage remote-mirroring. So don’t be fooled by appearances.  Storage remote-mirroring and Active Data Guard replication may look similar on the surface - but the devil is in the details. Only Active Data Guard has the smarts, the isolation, and the simplicity, to provide the best data protection and availability for the Oracle Database. Stay tuned for future blog posts that dive into the many differences between storage remote-mirroring and Active Data Guard along the dimensions of data protection, data availability, cost, asset utilization and return on investment. For additional information on Active Data Guard, see: Active Data Guard Technical White Paper Active Data Guard vs Storage Remote-Mirroring Active Data Guard Home Page on the Oracle Technology Network

  Read the article

• Creating the Business Card Request InfoPath Form

  - by JKenderdine

  Business Card Request Demo Files Back in January I spoke at SharePoint Saturday Virginia Beach about InfoPath forms and Web Part deployment.  Below is some of the information and details regarding the form I created for the session.  There are many blogs and Microsoft articles on how to create a basic form so I won’t repeat that information here.   This blog will just explain a few of the options I chose when creating the solutions for SPS Virginia Beach.  The above link contains the zipped package files of the two InfoPath forms(no code solution and coded solution), the list template for the Location list I used, and the PowerPoint deck.  If you plan to use these templates, you will need to update the forms to work within your own environments (change data connections, code links, etc.).  Also, you must have the SharePoint Enterprise version, with InfoPath Services configured in order to use the Web Browser enabled forms. So what are the requirements for this template? Business Card Request Form Template Design Plan: Gather user information and requirements for card Pull in as much user information as possible. Use data from the user profile web services as a data source Show and hide fields as necessary for requirements Create multiple views – one for those submitting the form and Another view for the executive assistants placing the orders. Browser based form integrated into SharePoint team site Submitted directly to form library The base form was created using the blank template.  The table and rows were added using Insert tab and selecting Custom Table.  The use of tables is a great way to make sure everything lines up.  You do have to split the tables from time to time.  If you’ve ever split cells and then tried to re-align one to find that you impacted the others, you know why.  Here is what the base form looks like in InfoPath.   Show and hide fields as necessary for requirements You will notice I also used Sections within the form.  These show or hide depending on options selected or whether or not fields are blank.  This is a great way to prevent your users from feeling overwhelmed with a large form (this one wouldn’t apply).  Although not used in this one, you can also use various views with a tab interface.  I’ll show that in another post. Gather user information and requirements for card Pull in as much user information as possible. Use data from the user profile web services as a data source Utilizing rules you can load data when the form initiates (Data tab, Form Load).  Anything you can automate is always appreciated by the user as that is data they don’t have to enter.  For example, loading their user id or other user information on load: Always keep in mind though how much data you load and the method for loading that data (through rules, code, etc.).  They have an impact on form performance.  The form will take longer to load if you bring in a ton of data from external sources.  Laura Rogers has a great blog post on using the User Information List to load user information.   If the user has logged into SharePoint, then this can be used quite effectively and without a huge performance hit.   What I have found is that using the User Profile service via code behind or the Web Service “GetUserProfileByName” (as above) can take more time to load the user data.  Just food for thought. You must add the data connection in order for the above rules to work.  You can connect to the data connection through the Data tab, Data Connections or select Manage Data Connections link which appears under the main data source.  The data connections can be SharePoint lists or libraries, SQL data tables, XML files, etc.  Create multiple views – one for those submitting the form and Another view for the executive assistants placing the orders. You can also create multiple views for the users to enhance their experience.  Once they’ve entered the information and submitted their request for business cards, they don’t really need to see the main data input screen any more.  They just need to view what they entered. From the Page Design tab, select New View and give the view a name.  To review the existing views, click the down arrow under View: The ReviewView shows just what the user needs and nothing more: Once you have everything configured, the form should be tested within a Test SharePoint environment before final deployment to production.  This validates you don’t have any rules or code that could impact the server negatively. Submitted directly to form library   You will need to know the form library that you will be submitting to when publishing the template.  Configure the Submit data connection to connect to this library.  There is already one configured in the sample,  but it will need to be updated to your environment prior to publishing. The Design template is different from the Published template.  While both have the .XSN extension, the published template contains all the “package” information for the form.  The published form is what is loaded into Central Admin, not the design template. Browser based form integrated into SharePoint team site In Central Admin, under General Settings, select Manage Form Templates.  Upload the published form template and Activate it to a site collection. Now it is available as a content type to select in the form library.  Some documentation on publishing form templates:  Technet – Manage administrator approved form templates And that’s all our base requirements.  Hope this helps to give a good start.

  Read the article

• Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

  - by Arkadius

  I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

  Read the article

• SSIS Reporting Pack v0.4 – Execution Report updated

  - by jamiet

  SSIS Reporting Pack is a suite of reports that I maintain at http://ssisreportingpack.codeplex.com/ that provide visualisation over the SSIS Catalog in SQL Server 2012 and attempt to add value over the reports that ship in the box. Work on the reports has stalled (my last SSIS Reporting Pack blog post was on 4th September 2011) as I’ve had rather more important things going on my life of late however I have recently checked-in a fix that couldn’t really be delayed. I discovered a problem with the Execution report that was causing the report to effectively hang, it was caused by this bit of SQL hidden away in the report definition: [generated_executables] AS (   SELECT  [new_executable].[execution_path],[new_executable].[parent_execution_path]   FROM    (           SELECT  [execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_close_square] + 1)           ,       [parent_execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_open_square])           FROM    (                   SELECT  [execution_path]                   ,       [char_index_open_square] = CHARINDEX('[',REVERSE([execution_path]),1)                   ,       [char_index_close_square] = CHARINDEX(']',REVERSE([execution_path]),1)                   ,       [length_exec_path] = LEN([execution_path])                   FROM    [exec_stats] es                   WHERE   execution_path LIKE '%\[%]%'  ESCAPE '\'                   )AS [loop_iteration]           ) AS [new_executable]   GROUP   BY [new_executable].[execution_path],[new_executable].[parent_execution_path]) It was there because SSIS does not currently treat a loop iteration as an executable yet I figured there was still value in being able to view it as such – this SQL essentially “invents” new executables for those loop iterations; its what enabled the following visualisation: where each of the three iterations of a For Each Loop called “FEL Loop over top performing regions” appear in the report. Unfortunately, as I alluded, this could under certain circumstances (most likely when there were many loop iterations) cause the report to hang as it waited for the results to be constructed and returned. The change that I have made eradicates this generation of “fake” executables and thus produces this visualisation instead: Notice that the three “children” of the For Each Loop are no longer the three iterations but actually the task (“EPT Call Data Export Package”) contained within that For Each Loop. The problem here is of course that there is no longer a visual distinction between those three iterations; I have instead made the full execution path viewable via a tooltip:   If you preferred the “old” way of presenting this information and are happy to put up with the performance degradation then I have kept the old version of the report hanging around in the reporting pack as “execution loop with iterations” however none of the other reports link to it so you will have to browse to it manually if you want to use it. Please let me know if you ARE using it – I would be very interested to hear about your experiences.   The last change to make you aware of in the execution report is that by default I no longer show OnPreValidate or OnPostValidate messages as I consider them to be superfluous and only serve to clutter up the results. If you want to put them back, well, its open source so go right ahead!   The latest release of SSIS Reporting Pack that contains all of these changes is v0.4 and can be downloaded from http://ssisreportingpack.codeplex.com/releases/view/88178   Feedback on all of the above changes would be very much appreciated. @Jamiet

  Read the article

• Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution

  - by Kellsey Ruppel

  Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution CUSTOMER AND PARTNER INFORMATION Customer Name – Siemens AG, Sector Healthcare Customer Revenue – 73,515 Billion Euro (2011, Siemens AG total) Customer Quote – “The realization of our complex requirements within a very short amount of time was enabled through the competent implementation partner Sapient, who fully used the  very broad scope of standard functionality provided in the Oracle WebCenter Portal, and the management of customer services, who continuously supported the project setup. ” – Joerg Modlmayr, Project Manager, Healthcare Customer Service Portal, Siemens AG The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. To ensure greater transparency, increased efficiency, higher user acceptance, and additional services, Siemens AG, Sector Healthcare, replaced several existing legacy portal solutions that could not meet the company’s future needs with Oracle WebCenter Portal. Various existing portal solutions that cannot meet future demands will be successively replaced by the new central service portal, which will also allow for the efficient and intuitive implementation of new service concepts.  With Oracle, doctors and hospitals using Siemens medical solutions now have access to a central information portal that provides important information and services at just the push of a button.  Customer Name – Siemens AG, Sector Healthcare Customer URL – www.siemens.com Customer Headquarters – Erlangen, Germany Industry – Industrial Manufacturing Employees – 360,000  Challenges – Replace disparate medical service portals to meet future demands and eliminate an  unnecessarily high level of administrative work caused by heterogeneous installations Ensure portals meet current user demands to improve user-acceptance rates and increase number of total users Enable changes and expansion through standard functionality to eliminate the need for reliance on IT and reduce administrative efforts and associated high costs Ensure efficient and intuitive implementation of new service concepts for all devices and systems Ensure hospitals and clinics to transparently monitor and measure services rendered for the various medical devices and systems  Increase electronic interaction and expand services to achieve a higher level of customer loyalty Solution –  Deployed Oracle WebCenter Portal to ensure greater transparency, and as a result, a higher level of customer loyalty  Provided a centralized platform for doctors and hospitals using Siemens’ medical technology solutions that provides important information and services at the push of a button Reduced significantly the administrative workload by centralizing the solution in the new customer service portal Secured positive feedback from customers involved in the pilot program developed by design experts from Oracle partner Sapient. The interfaces were created with customer needs in mind. The first survey taken shortly after implementation came back with 2.4 points on a scale of 0-3 in the category “customer service portal intuitiveness level” Met all requirements including alignment with the Siemens Style Guide without extensive programming Implemented additional services via the portal such as benchmarking options to ensure the optimal use of the Customer Device Park Provided option for documentation of all services rendered in conjunction with the medical technology systems to ensure that the value of the services are transparent for the decision makers in the hospitals  Saved and stored all machine data from approximately 100,000 remote systems in the central service and information platform Provided the option to register errors online and follow the call status in real-time on the portal Made  available at the push of a button all information on the medical technology devices used in hospitals or clinics—from security checks and maintenance activities to current device statuses Provided PDF format Service Performance Reports that summarize information from periods of time ranging from previous weeks up to one year, meeting medical product law requirements  Why Oracle – Siemens AG favored Oracle for many reasons, however, the company ultimately decided to go with Oracle due to the enormous range of functionality the solutions offered for the healthcare sector.“We are not programmers; we are service providers in the medical technology segment and focus on the contents of the portal. All the functionality necessary for internet-based customer interaction is already standard in Oracle WebCenter Portal, which is a huge plus for us. Having Oracle as our technology partner ensures that the product will continually evolve, providing a strong technology platform for our customer service portal well into the future,” said Joerg Modlmayr project manager, Healthcare Customer Service Portal, Siemens AG. Partner Involvement – Siemens AG selected Oracle Partner Sapient because the company offered a service portfolio that perfectly met Siemens’ requirements and had a wealth of experience implementing Oracle WebCenter Portal. Additionally, Sapient had designers with a very high level of expertise in usability—an aspect that Siemens considered to be of vast importance for the project.  “The Sapient team completely met all our expectations. Our tightly timed project was completed on schedule, and the positive feedback from our users proves that we set the right measures in terms of usability—all thanks to the folks at Sapient,” Modlmayr said.  Partner Name – Sapient GmbH Deutschland Partner URL – www.sapient.com

  Read the article

• SSIS Reporting Pack v0.4 – Execution Report updated

  - by jamiet

  SSIS Reporting Pack is a suite of reports that I maintain at http://ssisreportingpack.codeplex.com/ that provide visualisation over the SSIS Catalog in SQL Server 2012 and attempt to add value over the reports that ship in the box. Work on the reports has stalled (my last SSIS Reporting Pack blog post was on 4th September 2011) as I’ve had rather more important things going on my life of late however I have recently checked-in a fix that couldn’t really be delayed. I discovered a problem with the Execution report that was causing the report to effectively hang, it was caused by this bit of SQL hidden away in the report definition: [generated_executables] AS (   SELECT  [new_executable].[execution_path],[new_executable].[parent_execution_path]   FROM    (           SELECT  [execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_close_square] + 1)           ,       [parent_execution_path] = SUBSTRING([loop_iteration].[execution_path] ,1, [loop_iteration].length_exec_path - [loop_iteration].[char_index_open_square])           FROM    (                   SELECT  [execution_path]                   ,       [char_index_open_square] = CHARINDEX('[',REVERSE([execution_path]),1)                   ,       [char_index_close_square] = CHARINDEX(']',REVERSE([execution_path]),1)                   ,       [length_exec_path] = LEN([execution_path])                   FROM    [exec_stats] es                   WHERE   execution_path LIKE '%\[%]%'  ESCAPE '\'                   )AS [loop_iteration]           ) AS [new_executable]   GROUP   BY [new_executable].[execution_path],[new_executable].[parent_execution_path]) It was there because SSIS does not currently treat a loop iteration as an executable yet I figured there was still value in being able to view it as such – this SQL essentially “invents” new executables for those loop iterations; its what enabled the following visualisation: where each of the three iterations of a For Each Loop called “FEL Loop over top performing regions” appear in the report. Unfortunately, as I alluded, this could under certain circumstances (most likely when there were many loop iterations) cause the report to hang as it waited for the results to be constructed and returned. The change that I have made eradicates this generation of “fake” executables and thus produces this visualisation instead: Notice that the three “children” of the For Each Loop are no longer the three iterations but actually the task (“EPT Call Data Export Package”) contained within that For Each Loop. The problem here is of course that there is no longer a visual distinction between those three iterations; I have instead made the full execution path viewable via a tooltip:   If you preferred the “old” way of presenting this information and are happy to put up with the performance degradation then I have kept the old version of the report hanging around in the reporting pack as “execution loop with iterations” however none of the other reports link to it so you will have to browse to it manually if you want to use it. Please let me know if you ARE using it – I would be very interested to hear about your experiences.   The last change to make you aware of in the execution report is that by default I no longer show OnPreValidate or OnPostValidate messages as I consider them to be superfluous and only serve to clutter up the results. If you want to put them back, well, its open source so go right ahead!   The latest release of SSIS Reporting Pack that contains all of these changes is v0.4 and can be downloaded from http://ssisreportingpack.codeplex.com/releases/view/88178   Feedback on all of the above changes would be very much appreciated. @Jamiet

  Read the article

• Silverlight Relay Commands

  - by George Evjen

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} I am fairly new at Silverlight development and I usually have an issue that needs research every day. Which I enjoy, since I like the idea of going into a day knowing that I am  going to learn something new. The issue that I am currently working on centers around relay commands. I have a pretty good handle on Relay Commands and how we use them within our applications. <Button Command="{Binding ButtonCommand}" CommandParameter="NewRecruit" Content="New Recruit" /> Here in our xaml we have a button. The button has a Command and a CommandParameter. The command binds to the ButtonCommand that we have in our ViewModel RelayCommand _buttonCommand;         /// <summary>         /// Gets the button command.         /// </summary>         /// <value>The button command.</value>         public RelayCommand ButtonCommand         {             get             {                 if (_buttonCommand == null)                 {                     _buttonCommand = new RelayCommand(                         x => x != null && x.ToString().Length > 0 && CheckCommandAvailable(x.ToString()),                         x => ExecuteCommand(x.ToString()));                 }                 return _buttonCommand;             }         }   In our relay command we then do some checks with a lambda expression. We check if the command  parameter is null, is the length greater than 0 and we have a CheckCommandAvailable method that will tell  us if the button is even enabled. After we check on these three items we then pass the command parameter to an action method. This is all pretty straight forward, the issue that we solved a few days ago centered around having a control that needed to use a Relay Command and this control was a nested control and was using a different DataContext. The example below illustrates how we handled this scenario. In our xaml usercontrol we had to set a name to this control. <Controls3:RadTileViewItem x:Class="RecruitStatusTileView"     xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:d="http://schemas.microsoft.com/expression/blend/2008"     xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"      xmlns:Controls1="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls"      xmlns:Controls2="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Input"      xmlns:Controls3="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation"      mc:Ignorable="d" d:DesignHeight="400" d:DesignWidth="800" Header="{Binding Title,Mode=TwoWay}" MinimizedHeight="100"                             x:Name="StatusView"> Here we are using a telerik RadTileViewItem. We set the name of this control to “StatusView”. In our button control we set our command parameters and commands different than the example above. <HyperlinkButton Content="{Binding BigBoardButtonText, Mode=TwoWay}" CommandParameter="{Binding 'Position.PositionName'}" Command="{Binding ElementName=StatusView, Path=DataContext.BigBoardCommand, Mode=TwoWay}" /> This hyperlink button lives in a ListBox control and this listbox has an ItemSource of PositionSelectors. The Command Parameter is binding to the Position.Position property of that PositionSelectors object. This again is pretty straight forward again. What gets a bit tricky is the Command property in the hyperlink. It is binding to the element name we created in the user control (StatusView) Because this hyperlink is in a listbox and is in the item template it doesn’t have a direct handle on the DataContext that the RadTileViewItem has so we have to make sure it does. We do that by binding to the element name of status view then set the path to DataContext.BigBoardCommand. BigBoardCommand is the name of the RelayCommand in the view model. private RelayCommand _bigBoardCommand = null;         /// <summary>         /// Gets the big board command.         /// </summary>         /// <value>The big board command.</value>         public RelayCommand BigBoardCommand         {             get             {                 if (_bigBoardCommand == null)                 {                     _bigBoardCommand = new RelayCommand(x => true, x => AddToBigBoard(x.ToString()));                 }                 return _bigBoardCommand;             }         } From there we check for true again and then call the action and pass in the parameter that we had as the command parameter. What we are working on now is a bit trickier than this second example. In the above example we are only creating this TileViewItem with this name “StatusView” once. In another part of our application we are generating multiple TileViewItems, so we cannot set the name in the control as we cant have multiple controls with the same name. When we run the application we get an error that reads that the value is out of expected range. My searching has led me to think we cannot have multiple controls with the same name. This is today’s problem and Ill post the solution to this once it is found.

  Read the article

• SQL SERVER – ?Finding Out What Changed in a Deleted Database – Notes from the Field #041

  - by Pinal Dave

  [Note from Pinal]: This is a 41th episode of Notes from the Field series. The real world is full of challenges. When we are reading theory or book, we sometimes do not realize how real world reacts works and that is why we have the series notes from the field, which is extremely popular with developers and DBA. Let us talk about interesting problem of how to figure out what has changed in the DELETED database. Well, you think I am just throwing the words but in reality this kind of problems are making our DBA’s life interesting and in this blog post we have amazing story from Brian Kelley about the same subject. In this episode of the Notes from the Field series database expert Brian Kelley explains a how to find out what has changed in deleted database. Read the experience of Brian in his own words. Sometimes, one of the hardest questions to answer is, “What changed?” A similar question is, “Did anything change other than what we expected to change?” The First Place to Check – Schema Changes History Report: Pinal has recently written on the Schema Changes History report and its requirement for the Default Trace to be enabled. This is always the first place I look when I am trying to answer these questions. There are a couple of obvious limitations with the Schema Changes History report. First, while it reports what changed, when it changed, and who changed it, other than the base DDL operation (CREATE, ALTER, DELETE), it does not present what the changes actually were. This is not something covered by the default trace. Second, the default trace has a fixed size. When it hits that size, the changes begin to overwrite. As a result, if you wait too long, especially on a busy database server, you may find your changes rolled off. But the Database Has Been Deleted! Pinal cited another issue, and that’s the inability to run the Schema Changes History report if the database has been dropped. Thankfully, all is not lost. One thing to remember is that the Schema Changes History report is ultimately driven by the Default Trace. As you may have guess, it’s a trace, like any other database trace. And the Default Trace does write to disk. The trace files are written to the defined LOG directory for that SQL Server instance and have a prefix of log_: Therefore, you can read the trace files like any other. Tip: Copy the files to a working directory. Otherwise, you may occasionally receive a file in use error. With the Default Trace files, if you ask the question early enough, you can see the information for a deleted database just the same as any other database. Testing with a Deleted Database: Here’s a short script that will create a database, create a schema, create an object, and then drop the database. Without the database, you can’t do a standard Schema Changes History report. CREATE DATABASE DeleteMe; GO USE DeleteMe; GO CREATE SCHEMA Test AUTHORIZATION dbo; GO CREATE TABLE Test.Foo (FooID INT); GO USE MASTER; GO DROP DATABASE DeleteMe; GO This sets up the perfect situation where we can’t retrieve the information using the Schema Changes History report but where it’s still available. Finding the Information: I’ve sorted the columns so I can see the Event Subclass, the Start Time, the Database Name, the Object Name, and the Object Type at the front, but otherwise, I’m just looking at the trace files using SQL Profiler. As you can see, the information is definitely there: Therefore, even in the case of a dropped/deleted database, you can still determine who did what and when. You can even determine who dropped the database (loginame is captured). The key is to get the default trace files in a timely manner in order to extract the information. If you want to get started with performance tuning and database security with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Unexpected advantage of Engineered Systems

  - by user12244672

  It's not surprising that Engineered Systems accelerate the debugging and resolution of customer issues. But what has surprised me is just how much faster issue resolution is with Engineered Systems such as SPARC SuperCluster. These are powerful, complex, systems used by customers wanting extreme database performance, app performance, and cost saving server consolidation. A SPARC SuperCluster consists or 2 or 4 powerful T4-4 compute nodes, 3 or 6 extreme performance Exadata Storage Cells, a ZFS Storage Appliance 7320 for general purpose storage, and ultra fast Infiniband switches.  Each with its own firmware. It runs Solaris 11, Solaris 10, 11gR2, LDoms virtualization, and Zones virtualization on the T4-4 compute nodes, a modified version of Solaris 11 in the ZFS Storage Appliance, a modified and highly tuned version of Oracle Linux running Exadata software on the Storage Cells, another Linux derivative in the Infiniband switches, etc. It has an Infiniband data network between the components, a 10Gb data network to the outside world, and a 1Gb management network. And customers can run whatever middleware and apps they want on it, clustered in whatever way they want. In one word, powerful.  In another, complex. The system is highly Engineered.  But it's designed to run general purpose applications. That is, the physical components, configuration, cabling, virtualization technologies, switches, firmware, Operating System versions, network protocols, tunables, etc. are all preset for optimum performance and robustness. That improves the customer experience as what the customer runs leverages our technical know-how and best practices and is what we've tested intensely within Oracle. It should also make debugging easier by fixing a large number of variables which would otherwise be in play if a customer or Systems Integrator had assembled such a complex system themselves from the constituent components.  For example, there's myriad network protocols which could be used with Infiniband.  Myriad ways the components could be interconnected, myriad tunable settings, etc. But what has really surprised me - and I've been working in this area for 15 years now - is just how much easier and faster Engineered Systems have made debugging and issue resolution. All those error opportunities for sub-optimal cabling, unusual network protocols, sub-optimal deployment of virtualization technologies, issues with 3rd party storage, issues with 3rd party multi-pathing products, etc., are simply taken out of the equation. All those error opportunities for making an issue unique to a particular set-up, the "why aren't we seeing this on any other system ?" type questions, the doubts, just go away when we or a customer discover an issue on an Engineered System. It enables a really honed response, getting to the root cause much, much faster than would otherwise be the case. Here's a couple of examples from the last month, one found in-house by my team, one found by a customer: Example 1: We found a node eviction issue running 11gR2 with Solaris 11 SRU 12 under extreme load on what we call our ExaLego test system (mimics an Exadata / SuperCluster 11gR2 Exadata Storage Cell set-up).  We quickly established that an enhancement in SRU12 enabled an 11gR2 process to query Infiniband's Subnet Manager, replacing a fallback mechanism it had used previously.  Under abnormally heavy load, the query could return results which were misinterpreted resulting in node eviction.  In several daily joint debugging sessions between the Solaris, Infiniband, and 11gR2 teams, the issue was fully root caused, evaluated, and a fix agreed upon.  That fix went back into all Solaris releases the following Monday.  From initial issue discovery to the fix being put back into all Solaris releases was just 10 days. Example 2: A customer reported sporadic performance degradation.  The reasons were unclear and the information sparse.  The SPARC SuperCluster Engineered Systems support teams which comprises both SPARC/Solaris and Database/Exadata experts worked to root cause the issue.  A number of contributing factors were discovered, including tunable parameters.  An intense collaborative investigation between the engineering teams identified the root cause to a CPU bound networking thread which was being starved of CPU cycles under extreme load.  Workarounds were identified.  Modifications have been put back into 11gR2 to alleviate the issue and a development project already underway within Solaris has been sped up to provide the final resolution on the Solaris side.  The fixed SPARC SuperCluster configuration greatly aided issue reproduction and dramatically sped up root cause analysis, allowing the correct workarounds and fixes to be identified, prioritized, and implemented.  The customer is now extremely happy with performance and robustness.  Since the configuration is common to other customers, the lessons learned are being proactively rolled out to other customers and incorporated into the installation procedures for future customers.  This effectively acts as a turbo-boost to performance and reliability for all SPARC SuperCluster customers.  If this had occurred in a "home grown" system of this complexity, I expect it would have taken at least 6 months to get to the bottom of the issue.  But because it was an Engineered System, known, understood, and qualified by both the Solaris and Database teams, we were able to collaborate closely to identify cause and effect and expedite a solution for the customer.  That is a key advantage of Engineered Systems which should not be underestimated.  Indeed, the initial issue mitigation on the Database side followed by final fix on the Solaris side, highlights the high degree of collaboration and excellent teamwork between the Oracle engineering teams.  It's a compelling advantage of the integrated Oracle Red Stack in general and Engineered Systems in particular.

  Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >