Search Results

Search found 6254 results on 251 pages for 'ready'.

Page 242/251 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

  • PASS: Bylaw Changes

    - by Bill Graziano
    While you’re reading this, a post should be going up on the PASS blog on the plans to change our bylaws.  You should be able to find our old bylaws, our proposed bylaws and a red-lined version of the changes.  We plan to listen to feedback until March 31st.  At that point we’ll decide whether to vote on these changes or take other action. The executive summary is that we’re adding a restriction to prevent more than two people from the same company on the Board and eliminating the Board’s Officer Appointment Committee to have Officers directly elected by the Board.  This second change better matches how officer elections have been conducted in the past. The Gritty Details Our scope was to change bylaws to match how PASS actually works and tackle a limited set of issues.  Changing the bylaws is hard.  We’ve been working on these changes since the March board meeting last year.  At that meeting we met and talked through the issues we wanted to address.  In years past the Board has tried to come up with language and then we’ve discussed and negotiated to get to the result.  In March, we gave HQ guidance on what we wanted and asked them to come up with a starting point.  Hannes worked on building us an initial set of changes that we could work our way through.  Discussing changes like this over email is difficult wasn’t very productive.  We do a much better job on this at the in-person Board meetings.  Unfortunately there are only 2 or 3 of those a year. In August we met in Nashville and spent time discussing the changes.  That was also the day after we released the slate for the 2010 election. The discussion around that colored what we talked about in terms of these changes.  We talked very briefly at the Summit and again reviewed and revised the changes at the Board meeting in January.  This is the result of those changes and discussions. We made numerous small changes to clean up language and make wording more clear.  We also made two big changes. Director Employment Restrictions The first is that only two people from the same company can serve on the Board at the same time.  The actual language in section VI.3 reads: A maximum of two (2) Directors who are employed by, or who are joint owners or partners in, the same for-profit venture, company, organization, or other legal entity, may concurrently serve on the PASS Board of Directors at any time. The definition of “employed” is at the sole discretion of the Board. And what a mess this turns out to be in practice.  Our membership is a hodgepodge of interlocking relationships.  Let’s say three Board members get together and start a blog service for SQL Server bloggers.  It’s technically for-profit.  Let’s assume it makes $8 in the first year.  Does that trigger this clause?  (Technically yes.)  We had a horrible time trying to write language that covered everything.  All the sample bylaws that we found were just as vague as this. That led to the third clause in this section.  The first sentence reads: The Board of Directors reserves the right, strictly on a case-by-case basis, to overrule the requirements of Section VI.3 by majority decision for any single Director’s conflict of employment. We needed some way to handle the trivial issues and exercise some judgment.  It seems like a public vote is the best way.  This discloses the relationship and gets each Board member on record on the issue.   In practice I think this clause will rarely be used.  I think this entire section will only be invoked for actual employment issues and not for small side projects.  In either case we have the mechanisms in place to handle it in a public, transparent way. That’s the first and third clauses.  The second clause says that if your situation changes and you fall afoul of this restriction you need to notify the Board.  The clause further states that if this new job means a Board members violates the “two-per-company” rule the Board may request their resignation.  The Board can also  allow the person to continue serving with a majority vote.  I think this will also take some judgment.  Consider a person switching jobs that leads to three people from the same company.  I’m very likely to ask for someone to resign if all three are two weeks into a two year term.  I’m unlikely to ask anyone to resign if one is two weeks away from ending their term.  In either case, the decision will be a public vote that we can be held accountable for. One concern that was raised was whether this would affect someone choosing to accept a job.  I think that’s a choice for them to make.  PASS is clearly stating its intent that only two directors from any one organization should serve at any time.  Once these bylaws are approved, this policy should not come as a surprise to any potential or current Board members considering a job change.  This clause isn’t perfect.  The biggest hole is business relationships that aren’t defined above.  Let’s say that two employees from company “X” serve on the Board.  What happens if I accept a full-time consulting contract with that company?  Let’s assume I’m working directly for one of the two existing Board members.  That doesn’t violate section VI.3.  But I think it’s clearly the kind of relationship we’d like to prevent.  Unfortunately that was even harder to write than what we have now.  I fully expect that in the next revision of the bylaws we’ll address this.  It just didn’t make it into this one. Officer Elections The officer election process received a slightly different rewrite.  Our goal was to codify in the bylaws the actual process we used to elect the officers.  The officers are the President, Executive Vice-President (EVP) and Vice-President of Marketing.  The Immediate Past President (IPP) is also an officer but isn’t elected.  The IPP serves in that role for two years after completing their term as President.  We do that for continuity’s sake.  Some organizations have a President-elect that serves for one or two years.  The group that founded PASS chose to have an IPP. When I started on the Board, the Nominating Committee (NomCom) selected the slate for the at-large directors and the slate for the officers.  There was always one candidate for each officer position.  It wasn’t really an election so much as the NomCom decided who the next person would be for each officer position.  Behind the scenes the Board worked to select the best people for the role. In June 2009 that process was changed to bring it line with what actually happens.  An Officer Appointment Committee was created that was a subset of the Board.  That committee would take time to interview the candidates and present a slate to the Board for approval.  The majority vote of the Board would determine the officers for the next two years.  In practice the Board itself interviewed the candidates and conducted the elections.  That means it was time to change the bylaws again. Section VII.2 and VII.3 spell out the process used to select the officers.  We use the phrase “Officer Appointment” to separate it from the Director election but the end result is that the Board elects the officers.  Section VII.3 starts: Officers shall be appointed bi-annually by a majority of all the voting members of the Board of Directors. Everything else revolves around that sentence.  We use the word appoint but they truly are elected.  There are details in the bylaws for term limits, minimum requirements for President (1 prior term as an officer), tie breakers and filling vacancies. In practice we will have an election for President, then an election for EVP and then an election for VP Marketing.  That means that losing candidates will be able to fall down the ladder and run for the next open position.  Another point to note is that officers aren’t at-large directors.  That means if a current sitting officer loses all three elections they are off the Board.  Having Board member votes public will help with the transparency of this approach. This process has a number of positive and negatives.  The biggest concern I expect to hear is that our members don’t directly choose the officers.  I’m going to try and list all the positives and negatives of this approach. Many non-profits value continuity and are slower to change than a business.  On the plus side this promotes that.  On the negative side this promotes that.  If we change too slowly the members complain that we aren’t responsive.  If we change too quickly we make mistakes and fail at various things.  We’ve been criticized for both of those lately so I’m not entirely sure where to draw the line.  My rough assumption to this point is that we’re going too slow on governance and too quickly on becoming “more than a Summit.”  This approach creates competition in the officer elections.  If you are an at-large director there is no consequence to losing an election.  If you are an officer the only way to stay on the Board is to win an officer election or an at-large election.  If you are an officer and lose an election you can always run for the next office down.  This makes it very easy for multiple people to contest an election. There is value in a person moving through the officer positions up to the Presidency.  Having the Board select the officers promotes this.  The down side is that it takes a LOT of time to get to the Presidency.  We’ve had good people struggle with burnout.  We’ve had lots of discussion around this.  The process as we’ve described it here makes it possible for someone to move quickly through the ranks but doesn’t prevent people from working their way up through each role. We talked long and hard about having the officers elected by the members.  We had a self-imposed deadline to complete these changes prior to elections this summer. The other challenge was that our original goal was to make the bylaws reflect our actual process rather than create a new one.  I believe we accomplished this goal. We ran out of time to consider this option in the detail it needs.  Having member elections for officers needs a number of problems solved.  We would need a way for candidates to fall through the election.  This is what promotes competition.  Without this few people would risk an election and we’ll be back to one candidate per slot.  We need to do this without having multiple elections.  We may be able to copy what other organizations are doing but I was surprised at how little I could find on other organizations.  We also need a way for people that lose an officer election to win an at-large election.  Otherwise we’ll have very little competition for officers. This brings me to an area that I think we as a Board haven’t done a good job.  We haven’t built a strong process to tell you who is doing a good job and who isn’t.  This is a double-edged sword.  I don’t want to highlight Board members that are failing.  That’s not a good way to get people to volunteer and run for the Board.  But I also need a way let the members make an informed choice about who is doing a good job and would make a good officer.  Encouraging Board members to blog, publishing minutes and making votes public helps in that regard but isn’t the final answer.  I don’t know what the final answer is yet.  I do know that the Board members themselves are uniquely positioned to know which other Board members are doing good work.  They know who speaks up in meetings, who works to build consensus, who has good ideas and who works with the members.  What I Could Do Better I’ve learned a lot writing this about how we communicated with our members.  The next time we revise the bylaws I’d do a few things differently.  The biggest change would be to provide better documentation.  The March 2009 minutes provide a very detailed look into what changes we wanted to make to the bylaws.  Looking back, I’m a little surprised at how closely they matched our final changes and covered the various arguments.  If you just read those you’d get 90% of what we eventually changed.  Nearly everything else was just details around implementation.  I’d also consider publishing a scope document defining exactly what we were doing any why.  I think it really helped that we had a limited, defined goal in mind.  I don’t think we did a good job communicating that goal outside the meeting minutes though. That said, I wish I’d blogged more after the August and January meeting.  I think it would have helped more people to know that this change was coming and to be ready for it. Conclusion These changes address two big concerns that the Board had.  First, it prevents a single organization from dominating the Board.  Second, it codifies and clearly spells out how officers are elected.  This is the process that was previously followed but it was somewhat murky.  These changes bring clarity to this and clearly explain the process the Board will follow. We’re going to listen to feedback until March 31st.  At that time we’ll decide whether to approve these changes.  I’m also assuming that we’ll start another round of changes in the next year or two.  Are there other issues in the bylaws that we should tackle in the future?

    Read the article

  • CodePlex Daily Summary for Tuesday, August 21, 2012

    CodePlex Daily Summary for Tuesday, August 21, 2012Popular ReleasesResX Resource Manager: 1.0.0.1 Visual Studio Extension: Fix: truncated version in VSIX manifest leads to permanent update notifications.MFCMAPI: August 2012 Release: Build: 15.0.0.1035 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeDocument.Editor: 2013.2: Whats new for Document.Editor 2013.2: New save as Html document Improved Traslate support Minor Bug Fix's, improvements and speed upsSharePoint Dynamic Forms: Version 1.0: Version 1.0 of SharePoint Dynamic Forms Includes 1. List Based Rendering 2. Template Based Rendering 2.1 Supports extensive field validation types including String, Date, Comparison, Content Length, regex etc. 2.2 Support for cross field comparison validation. 2.3 Data entry option for a user who doesn’t have write permission to a list. 2.4 Option to extend the web part by overriding form submission event. 2.5 Option to cancel the form submission and provide custom notification message. 2.6 ...Pulse: Pulse Beta 5: Whats new in this release? Well to start with we now have Wallbase.cc Authentication! so you can access favorites or NSFW. This version requires .NET 4.0, you probably already have it, but if you don't it's a free and easy download from Microsoft. Pulse can bet set to start on Windows startup now too. The Wallpaper setter has settings now, so you can change the background color of the desktop and the Picture Position (Tile/Center/Fill/etc...) I've switched to Windows Forms instead of WPF...HydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.5.5 Experimental Release: This is HydroDesktop 1.5.5 Experimental Release We are targeting for a 1.5 Stable Release in August 2012. This experimental version has been published for testing. New Features in 1.5 Time Series Data Import Improved performance of table, graph and edit views Support for online sample project packages (sharing data and analyses) More detailed display of time series metadata Improved extension manager (uninstall extensions, choose extension source) Improved attribute table editor (supports fi...Metro Paint: Metro Paint: Download it now , don't forget to give feedback to me at maitreyavyas@live.com or at my facebook page fb.com/maitreyavyas , Hope you enjoy it.MiniTwitter: 1.80: MiniTwitter 1.80 ???? ?? .NET Framework 4.5 ?????? ?? .NET Framework 4.5 ????????????? "&" ??????????????????? ???????????????????????? 2 ??????????? ReTweet ?????????????????、In reply to ?????????????? URL ???????????? ??????????????????????????????Droid Explorer: Droid Explorer 0.8.8.6 Beta: Device images are now pulled from DroidExplorer Cloud Service refined some issues with the usage statistics Added a method to get the first available value from a list of property names DroidExplorer.Configuration no longer depends on DroidExplorer.Core.UI (it is actually the other way now) fix to the bootstraper to only try to delete the SDK if it is a "local" sdk, not an existing. no longer support the "local" sdk, you must now select an existing SDK checks for sdk if it was ins...Path Copy Copy: 11.0.1: Bugfix release that corrects the following issue: 11365 If you are using Path Copy Copy in a network environment and use the UNC path commands, it is recommended that you upgrade to this version.ExtAspNet: ExtAspNet v3.1.9: +2012-08-18 v3.1.9 -??other/addtab.aspx???JS???BoundField??Tooltip???(Dennis_Liu)。 +??Window?GetShowReference???????????????(︶????、????、???、??~)。 -?????JavaScript?????,??????HTML????????。 -??HtmlNodeBuilder????????????????JavaScript??。 -??????WindowField、LinkButton、HyperLink????????????????????????????。 -???????????grid/griddynamiccolumns2.aspx(?????)。 -?????Type??Reset?????,??????????????????(e??)。 -?????????????????????。 -?????????int,short,double??????????(???)。 +?Window????Ge...AcDown????? - AcDown Downloader Framework: AcDown????? v4.0.1: ?? ●AcDown??????????、??、??????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ??:????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? ??????????????,??????????: ??"AcDown?????"????????? ...Fluent Validation for .NET: 3.4: Changes since 3.3: Make ValidationResut.IsValid virtual Add private no-arg ctor to ValidationFailure to help with serialization Add Turkish error messages Work-around for reflection bug in .NET 4.5 that caused VerificationExceptions Assemblies are now unsigned to ease with versioning/upgrades (especially where other frameworks depend on FV) (Note if you need signed assemblies then you can use the following NuGet packages: FluentValidation-signed, FluentValidation.MVC3-signed, FluentV...DotNetNuke® Feedback: 06.02.01: Official Release - 17th August 2012 Please look at the Release Notes file included in the module packages or available on this page as a separate download for a listing of the bug fixes and enhancements found in this version. NOTE: Feedback v 06.02.00 REQUIRES a minimum DotNetNuke framework version of 06.02.00 as well as ASP.Net 3.5 SP1 and MS SQL Server 2005 or 2008 (Express or standard versions). This release brings some enhancements to the module as well as fixing all known bugs. Bug Fi...AssaultCube Reloaded: 2.5.3 Unnamed Fixed: If you are using deltas, download 2.5.2 first, then overwrite with the delta packages. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your ...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.6.1: Bug Fix release Bug Fixes Better support for transparent images IsFrozen respected if not bound to corrected deadlock stateWPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.7: Version: 2.5.0.7 (Milestone 7): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Add CollectionHelper.GetNextElementOrDefault method. InfoMan: Support creating a new email and saving it in the Send b...myCollections: Version 2.2.3.0: New in this version : Added setup package. Added Amazon Spain for Apps, Books, Games, Movie, Music, Nds and Tvshow. Added TVDB Spain for Tvshow. Added TMDB Spain for Movies. Added Auto rename files from title. Added more filters when adding files (vob,mpls,ifo...) Improve Books author and Music Artist Credits. Rewrite find duplicates for better performance. You can now add Custom link to items. You can now add type directly from the type list using right mouse button. Bug ...Player Framework by Microsoft: Player Framework for Windows 8 Preview 5 (Refresh): Support for Windows 8 and Visual Studio RTM Support for Smooth Streaming SDK beta 2 Support for live playback New bitrate meter and SD/HD indicators Auto smooth streaming track restriction for snapped mode to conserve bandwidth New "Go Live" button and SeekToLive API Support for offset start times Support for Live position unique from end time Support for multiple audio streams (smooth and progressive content) Improved intellisense in JS version NEW TO PREVIEW 5 REFRESH:Req...TFS Workbench: TFS Workbench v2.2.0.10: Compiled installers for TFS Workbench 2.2.0.10 Bug Fix Fixed bug that stopped the change workspace action from working.New ProjectsAdaptive modeling interface: Ami will be a framework to simplify scientific model development. Keywords: Modeling, C#AlphaDogDemo: A simple XNA gameDnf: Dnf??eProjectSem3: beginFluentGUI: A Silverlight library that enables composition of a type safe Graphical User Interface.Frontrader-IB: Financial test applicationHART Analyzer: HART Analyzer is a tool to monitor the HART protocol between field devices and your PC. It used Hart Communication Protocol Lite for the communication.Hybrid.Net - Light-weight GPU Computing for .NET: Hybrid.Net enables .NET developers to harness the power of GPUs for data- and compute-intense applications using the simple well-known construct: Parallel.ForLoggerz- A .Net Error Logging framework: A new and hopefully exciting error logging framework that will integrate nicely into any windows/web application. MakersEngine: World of Warcraft Emulator Compiling SoftwareMetro Paint: This is Metro Paint app which is a modern ui app for Windows 8 . To test it in your system you will need Visual Studio Express for Windows 8. Hope you love it.mojomo, a modular design framework for mojoPortal CMS: Mojomo is a modular, front end design framework for mojoPortal CMS. My CSharp reminders: Several simple code examples in C #, used as reminders for my future development in C #.MYCoding Codes: anyone can tell me about this?MyExample: testMyGit: my git source libraryNWebsec: NWebsec is a security library for ASP.NET applications. It's built on the philosophy that security should be simple and maintainable.Private cloud DMS: Cloud document management system with workflow support. Free essential version is destined for small companies or any user groups.proEx: just a testQuantoSharp: A Financial Quant library implemented in C# completely to showcase the power of mathematics and its application, aimed for educational purposes only.SharePoint SlideShow: Sharepoint SlideShow customizable webpart in sharepoint 2010. Slideshow from SP 2010 picture library using jquery. Please leave comments about the project.Tool army building for battle: Helper application to build army list for Warhammer BattleWinRT XAML Calendar: WinRT XAML Calendar control ported from the Silverlight Toolkit's Calendar control for Silverlight 4.????: ????? ??? ???? ??? ?????? ?????. ???? so.cl? ???? API? ???? ????? ????! ? ????? ???? ???? ????. ???? ????!..

    Read the article

  • CodePlex Daily Summary for Thursday, June 27, 2013

    CodePlex Daily Summary for Thursday, June 27, 2013Popular ReleasesV8.NET: V8.NET Beta Release v1.2.23.5: 1. Fixed some minor bugs. 2. Added the ability to reuse existing V8NativeObject types. Simply set the "Handle" property of the objects to a new native object handle (just write to it directly). Example: "myV8NativeObject.Handle = {V8Engine}.GlobalObject.Handle;" 3. Supports .NET 4.0! (forgot to compile against .NET 4.0 instead of 4.5, which is now fixed)Stored Procedure Pager: LYB.NET.SPPager 1.10: check bugs: 1 the total page count of default stored procedure ".LYBPager" always takes error as this: page size: 10 total item count: 100 then total page count should be 10, but last version is 11. 2 update some comments with English forbidding messy code.StyleMVVM: 3.0.3: This is a minor feature and bug fix release Features: SingletonAttribute - Shared(Permanently=true) has been obsoleted in favor of SingletonAttribute StyleMVVMServiceLocator - releasing new nuget package that implements the ServiceLocator pattern Bug Fixes: Fixed problem with ModuleManager when used in not XAML application Fixed problem with nuget packages in MVC & WCF project templatesWinRT by Example Sample Applications: Chapters 1 - 10: Source code for chapters 1 - 9 with tech edits for chapters 1 - 5.Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...xFunc: xFunc 2.3: Improved the Simplify method; Rewrote the Differentiate method in the Derivative class; Changed API; Added project for .Net 2.0/3.0/3.5/4.5/Portable;Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for WAMS. Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expecting only finite values. (...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...Compare .NET Objects: Version 1.7.2.0: If you like it, please rate it. :) Performance Improvements Fix for deleted row in a data table Added ability to ignore the collection order Fix for Ignoring by AttributesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.95: update parser to allow for CSS3 calc( function to nest. add recognition of -pponly (Preprocess-Only) switch in AjaxMinManifestTask build task. Fix crashing bug in EXE when processing a manifest file using the -xml switch and an error message needs to be displayed (like a missing input file). Create separate Clean and Bundle build tasks for working with manifest files (AjaxMinManifestCleanTask and AjaxMinBundleTask). Removed the IsCleanOperation from AjaxMinManifestTask -- use AjaxMinMan...VG-Ripper & PG-Ripper: VG-Ripper 2.9.44: changes NEW: Added Support for "ImgChili.net" links FIXED: Auto UpdaterDocument.Editor: 2013.25: What's new for Document.Editor 2013.25: Improved Spell Check support Improved User Interface Minor Bug Fix's, improvements and speed upsWPF Composites: Version 4.3.0: In this Beta release, I broke my code out into two separate projects. There is a core FasterWPF.dll with the minimal required functionality. This can run with only the Aero.dll and the Rx .dll's. Then, I have a FasterWPFExtras .dll that requires and supports the Extended WPF Toolkit™ Community Edition V 1.9.0 (including Xceed DataGrid) and the Thriple .dll. This is for developers who want more . . . Finally, you may notice the other OPTIONAL .dll's available in the download such as the Dyn...Channel9's Absolute Beginner Series: Windows Phone 8: Entire source code for the Channel 9 series, Windows Phone 8 Development for Absolute Beginners.Indent Guides for Visual Studio: Indent Guides v13: ImportantThis release does not support Visual Studio 2010. The latest stable release for VS 2010 is v12.1. Version History Changed in v13 Added page width guide lines Added guide highlighting options Fixed guides appearing over collapsed blocks Fixed guides not appearing in newly opened files Fixed some potential crashes Fixed lines going through pragma statements Various updates for VS 2012 and VS 2013 Removed VS 2010 support Changed in v12.1: Fixed crash when unable to start...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 2.1.0 - Prerelease d: Fluent Ribbon Control Suite 2.1.0 - Prerelease d(supports .NET 3.5, 4.0 and 4.5) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples (not for .NET 3.5) Foundation (Tabs, Groups, Contextual Tabs, Quick Access Toolbar, Backstage) Resizing (ribbon reducing & enlarging principles) Galleries (Gallery in ContextMenu, InRibbonGallery) MVVM (shows how to use this library with Model-View-ViewModel pattern) KeyTips ScreenTips Toolbars ColorGallery *Walkthrough (do...Magick.NET: Magick.NET 6.8.5.1001: Magick.NET compiled against ImageMagick 6.8.5.10. Breaking changes: - MagickNET.Initialize has been made obsolete because the ImageMagick files in the directory are no longer necessary. - MagickGeometry is no longer IDisposable. - Renamed dll's so they include the platform name. - Image profiles can now only be accessed and modified with ImageProfile classes. - Renamed DrawableBase to Drawable. - Removed Args part of PathArc/PathCurvetoArgs/PathQuadraticCurvetoArgs classes. The...Three-Dimensional Maneuver Gear for Minecraft: TDMG 1.1.0.0 for 1.5.2: CodePlex???(????????) ?????????(???1/4) ??????????? ?????????? ???????????(??????????) ??????????????????????? ↑????、?????????????????????(???????) ???、??????????、?????????????????????、????????1.5?????????? Shift+W(????)??????????????????10°、?10°(?????????)???New ProjectsAriana - .NET Userkit: Ariana Userkit is a library which will allow a file to persist after being executed. It can allow manipulating processes, registry keys, directories etc.Baidu Map: Baidu MapBTC Trader: BTC Trader is a tool for the automated and manual trading on BTC exchanges.Cafe Software Management: This is software for SokulChangix.Sql: Very, very simple ORM framework =)Composite WPF Extensions: Extensions to Composite Client Application Library for WPFCross Site Collection Search Configurator: A solution for SharePoint to allow you to share your site collection based search configuration between site collections in the same web application.CSS Extractor: Attempts to extract inline css styles from a HTML file and put them into a separate CSS fileCSS600Summer2013: This is a project for students enrolled in CSS 600 at University of Washington, Bothell campus.Easy Backup Application: Easy Backup Application - application for easy scheduled backup local or network folders.Easy Backup Windows Service: Easy Backup Windows Service - application for easy scheduled backup local or network folders.fangxue: huijiaGamelight: Gamelight is a 2D game library for Silverlight. It features 2D graphics manipulation to make the creation of games that don't adhere to traditional UI (such as sprite-based games) much easier. It also streamlines sound and input management. General Method: General MethodICE - Interface Communications Engine: ICE is an engine which makes it easy to create .NET plugins for running on servers for the purpose of communication between systems.LogWriterReader using Named pipe: LogWriterReader using Named pipeLu 6.2 Viewer: Tool for analysing LU62 strings. Visualisation of node lists in tree structure, it offers the possability to compare two lu62 strings in seperate windows and visualise the differences between the two segments selected. Fw 2.0 developed by Riccardo di Nuzzo (http://www.dinuzzo.it)Math.Net PowerShell: PowerShell environment for Math.Net Numerics library, defines a few cmdlets that allow to create and manipulate matrices using a straightforward syntax.mycode: my codeNFC#: NFCSharp is a project aimed at building a native C# support for NFC tag manipulation.NJquery: jquery???????????????Page Pro Image Viewer and Twain: Low level image viewer Proyecto Ferreteria "CristoRey": FirstRobótica e Automação: Sistema desenvolvido por Alessandro José Segura de Oliveira - MERodolpho Brock Projects: A MVC 'like' start application for MSVS2010 - Microsoft Visual Studio 2010 UIL - User Interface Layer : <UIB - User Interface Base> - GUI: Graphic User Interface - WEB: ASP.NET MVC BLL - Business Logic Layer : <BLB - Business Logic Base> - Only one core!!! DAL - Data Access Layer : <DAB - Data Access Base> - SQL Server - PostgreSQL ORM - Object-Relational Mapping <Object-Relational Base> - ADO.NET Entity FrameworkSilverlight Layouts: Silverlight Layouts is a project for controls that behave as content placeholders with pre-defined GUI layout for some of common scenarios: - frozen headers, - frozen columns, - cyrcle layouts etc.Simple Logging Façade for C++: Port for Simple Logging Façade for C++, with a Java equivalent known as slf4j. SQL Server Data Compare: * Compare the *data* in two databases record by record. * Generate *html compare results* with interactive interface. * Generate *T-SQL synchronization scripts*UserVisitLogsHelp: UserVisitLogsHelp is Open-source the log access records HttpModule extension Components .The component is developed with C#,it's a custom HttpModule component.V5Soft: webcome v5softvcseVBA - version controlled software engineering in VBA: Simplify distributed application development for Visual Basic for Applications with this Excel AddinVersionizer: Versionizer is a configuration management command-line tool developed using C# .NET for editing AssemblyInfo files of Microsoft .NET projects.WebsiteFilter: WebsiteFilter is an open source asp.net web site to access IP address filtering httpmodule components. Wordion: Wordion is a tool for foreign language learners to memorize words.????????: ????????-?????????,??@???? ????。1、????????????,2、??????????????(????,???????,“?? ??”),3、?????>??>>????5???,4、??"@?/?"?Excel??????@??,5、??“??@",???????@ 。????QQ:6763745

    Read the article

  • CodePlex Daily Summary for Monday, October 15, 2012

    CodePlex Daily Summary for Monday, October 15, 2012Popular ReleasesYAXLib: Yet Another XML Serialization Library for the .NET Framework: YAXLib 2.11: XML entity names now accept W3C standards. * Nullable types are not serialized with a `yaxlib:realtype` attribute any more. * Fixed some namespace related bugs. * Fixed an issue with deserializing date-time values that expose date time kind of UTC during serialization. * Classes can accept YAXDictionary and [YAXCollection] attributes. The value to these attributes can then be overridden by members instantiating them. * Unit tests all migrated to NUnit. ...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.2 For detailed release notes check the release notes. Revitalized IndexedDB providerNow you c...SQL Server Compact Toolbox: Release 3.1.1 Visual Studio add-in: Download the Visual Studio add-in for SQL Server Compact 3.5 and 4.0 from here SQL Server Compact Toolbox 3.1–Visual Guide of new features New features: - Added ability to generate Windows Phone 8 DataContext classes - Improved sqlmetal detection for VS 2012 only installationsVFPX: FoxcodePlus: FoxcodePlus - Visual Studio like extensions to Visual FoxPro IntelliSense.TFS 2012 Server/service Setup for Demo: TfsDemo_1.0.0.1: The console application today sets up Create a new Team Set the team as the default team Configure team settings Set Backlog Iteration path Set Team Iterations and start & finish dates Set Team Area path Add Team Members Add Product Backlog Items & linked Tasks. This has been tested against Tfs Server/Service using Scrum 2.1 Process TemplateZXMAK2: Version 2.6.4.0: - added RZX playback - fix Reset behaviorDroid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Iveely Search Engine: Iveely Search Engine (0.3.0): Iveely Search Engine?????????????,0.3.0????????,????????:??????。 ????????????"????“????????,????????????。??0.3.0???????????0.3.0????????,????。 ?????,????????????????,??????300????,?????????300?????????????????,?????????????????。????,??????????,???????,???????。???????IveelySE.Resource,???????????,???????????????????????,???????????。 ????????Iveely.config,??????IveelySE.Run.Task.exe,?????????http://127.0.0.1:8088/query=yourkeyword,??????。 ????,??? ??http://www.cnblogs.com/liufanping...Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...PHPExcel: PHPExcel 1.7.8: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated. Note changes to the PDF Writer: tcPDF is no longer bundled with PHPExcel, but should be installed separately if you wish to use that 3rd-Party library with PHPExcel. Alternatively, you can choose to use mPDF or DomPDF as PDF Rendering libraries instead: PHPExcel now provides a configurable wrapper allowing you a choice of PDF renderer. See the documentation, or the PDF s...DirectX Tool Kit: October 12, 2012: October 12, 2012 Added PrimitiveBatch for drawing user primitives Debug object names for all D3D resources (for PIX and debug layer leak reporting)mojoPortal: 2.3.9.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2393-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. Updated: I'm added an example for this question. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial ...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...VidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...New ProjectsAssertion.NUnit: NUnit test helper class. Traditionally NUnit stops test on the first check failure. But sometimes subsequent rules check may helps with bug location. BlobCache: BlobCache is a graphical way of modify the BlobCache setting in the Web Application web.config.C# Disassembler: Disassembler written in C#. In progress at this momentCakeThatIBaked: Web Scripting and content Creation Project FileCamelot SharePoint SQL Commander Web Part: The Camelot SharePoint SQL Commander Web Part is a simple yet powerful sql-query browser for Microsoft SharePoint 2010 and 2013.DB Shell: XAML dialect for describing database operations. Working both with database data and structure. Written for .NET 4.0. DffPlugin: DFF Importer/DFF exporter Description: 3ds max import & export plugins for GTA III era 3d models Supported games: GTA III, GTA VC, GTA SA Author: SeggaemanDirectory2Rss: Directory2Rss scans a list of files under a given set of directories and writes the output to a Rss feed which can be published on the web. When it is run again it checks for new files and writes the addition to the Rss feed. Great for monitoring directories for additions.Dynamics CRM 2011 Type interface for TypeScript: This project provides a type inteface for the CRM object model crm.d.ts. Including this file in your TypeScript project will add Intellisense support for the CREmail Organizer: Outlook 2010 add-in that shows a breakdown of what's taking up space in your inbox. Forismatic. Quotes and expressions. Windows Phone app.: The Windows Phone app for reading the forismatic.comGeekRule Open Source Software: GeekRule provides open source projects for the .NET development communityGestorht: Proyecto para la gestion ht del proyecto completoihashPwd: hashPwd provides hashing algorithms within a classical windows form. Current Version: 1.0bHuber Race: Huber Race is a modern open source race timing and scoring software program designed to time running races on the Windows stack. isanywhere: A command line utility to see if one or more files (given a filemask) are to be found anywhere inside a specific directory, or elsewhere inside one of its subdirectories. A sort of poor man's synchronisation utility, very simple but maybe quite handy.Läx-o-matic: A program for handling submitted answers to tasks, sent in by students.Lixo Eletrônico - Projeto Integrador 2: Não sei o que escrever aqui...só que isso precisa ser feito.Music Note Shuffle - Encouraging Games (SLXNA Game): 0 people following this project (follow) Music Note Shuffle - Encouraging Games VB.Net Silverlight and XNA Game How did this project come about? One of the thmysocket??: ??????,???????myupload: myuploadndalexiswalkingweb2: This is a summary of the codeplex area. To be updated later.OpenMVCRM: This is a free CRM Application which anybody can download and use. Our intention is to make it easy for every small organizations to have a CRM to manage their business. This software is being developed in the wonderful so called ASP.NET MVC and all those wonderful things ASP.NET MVC team is throwing out. We owe to everyonePOV-Ray in Visual Studio: Born out of my own frustrations with the POV-Ray text editor, I decided to embark on this project. Currently it is in the very early stages. QRCode App for SharePoint 2013: The QRCode App is an app part to generate dynamically QRCode in your SharePoint's pages. RazorSourceGenerator: ??????Razor Engine??????,????Razor?????????????????Schema????SQL?????????。RomEditor: Editing CWM-Based Roms made easy !Some Unit-Testing Utilities: Testing for thrown exceptions in the default MS unit-testing framework is not optimal for a variety of reasons. Here are some utility methods that do it betterTMX Map Loader XNA for Windows Phone 7/8: TMXMapLoaderXNA is a full XNA content pipeline library that allows you to import TMX map files.Uzi.Packaging: OPC abstraction library used in Ikosa Framework and Guildsmanship: Battle-Scapes.wtother: wtotherXML File Editor: Egy alkalmazás, amellyel XML fájlokat tudunk kontrolláltan szerkeszteni. A program feladata, hogy egy (konzol) felületen keresztül, menüvezérelten tudjunk szabvYasminuroban: Yasminuroban is an open source "Sokoban" (aka "Warehouse Keeper" or "Boxes") alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard. Includes level editor. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.

    Read the article

  • CodePlex Daily Summary for Saturday, January 29, 2011

    CodePlex Daily Summary for Saturday, January 29, 2011Popular ReleasesRawr: Rawr 4.0.17 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 and on the Version Notes page: http://rawr.codeplex.com/wikipage?title=VersionNotes As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you...VivoSocial: VivoSocial 7.4.2: Version 7.4.2 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 7.4.2 release and see if they persist. If you have any questions about this release, please post them in our Support forums. If you are experiencing a bug or would like to request a new feature, please submit it to our issue tracker. Web Controls * Updated Business Objects and added a new SQL Data Provider File. Groups * Fixed a security issue whe...PHP Manager for IIS: PHP Manager 1.1.1 for IIS 7: This is a minor release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus several bug fixes (see change list for more details). Also, this release includes Russian language support. SHA1 codes for the downloads are: PHPManagerForIIS-1.1.0-x86.msi - 6570B4A8AC8B5B776171C2BA0572C190F0900DE2 PHPManagerForIIS-1.1.0-x64.msi - 12EDE004EFEE57282EF11A8BAD1DC1ADFD66A654BloodSim: WControls.dll update: Priority Update It's just come to my attention that the latest version of WControls.dll was not included in the 1.4 release and as a result, BloodSim has been unuseable. Please download WControls.dll from here, and this will rectify the issue.VFPX: VFP2C32 2.0.0.8 Release Candidate: This release includes several bugfixes, new functions and finally a CHM help file for the complete library.DB>doc for Microsoft SQL Server: 1.0.0.0: Initial release Supported output HTML WikiPlex markup Raw XML Supported objects Tables Primary Keys Foreign Keys ViewsmojoPortal: 2.3.6.1: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2361-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Office Web.UI: Alpha preview: This is the first alpha release. Very exciting moment... This download is just the demo application : "Contoso backoffice Web App". No source included for the moment, just the app, for testing purposes and for feedbacks !! This package includes a set of official MS Office icons (143 png 16x16 and 132 png 32x32) to really make a great app ! Please rate and give feedback ThanksParallel Programming with Microsoft Visual C++: Drop 6 - Chapters 4 and 5: This is Drop 6. It includes: Drafts of the Preface, Introduction, Chapters 2-7, Appendix B & C and the glossary Sample code for chapters 2-7 and Appendix A & B. The new material we'd like feedback on is: Chapter 4 - Parallel Aggregation Chapter 5 - Futures The source code requires Visual Studio 2010 in order to run. There is a known bug in the A-Dash sample when the user attempts to cancel a parallel calculation. We are working to fix this.Catel - WPF and Silverlight MVVM library: 1.1: (+) Styles can now be changed dynamically, see Examples application for a how-to (+) ViewModelBase class now have a constructor that allows services injection (+) ViewModelBase services can now be configured by IoC (via Microsoft.Unity) (+) All ViewModelBase services now have a unit test implementation (+) Added IProcessService to run processes from a viewmodel with directly using the process class (which makes it easier to unit test view models) (*) If the HasErrors property of DataObjec...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.160: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release improves NodeXL's Twitter and Pajek features. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file in Windows Explorer and select "Extract All." Close Ex...Kooboo CMS: Kooboo CMS 3.0 CTP: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL, RavenDB and SQLCE. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder to enable...UOB & ME: UOB ME 2.6: UOB ME 2.6????: ???? V1.0: ???? V1.0 ??Password Generator: 2.2: Parallel password generation Password strength calculation ( Same method used by Microsoft here : https://www.microsoft.com/protect/fraud/passwords/checker.aspx ) Minor code refactoringVisual Studio 2010 Architecture Tooling Guidance: Spanish - Architecture Guidance: Francisco Fagas http://geeks.ms/blogs/ffagas, Microsoft Most Valuable Professional (MVP), localized the Visual Studio 2010 Quick Reference Guidance for the Spanish communities, based on http://vsarchitectureguide.codeplex.com/releases/view/47828. Release Notes The guidance is available in a xps-only (default) or complete package. The complete package contains the files in xps, pdf and Office 2007 formats. 2011-01-24 Publish version 1.0 of the Spanish localized bits.ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.2: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager the html generation has been optimized, the html page size is much smaller nowFacebook Graph Toolkit: Facebook Graph Toolkit 0.6: new Facebook Graph objects: Application, Page, Post, Comment Improved Intellisense documentation new Graph Api connections: albums, photos, posts, feed, home, friends JSON Toolkit upgraded to version 0.9 (beta release) with bug fixes and new features bug fixed: error when handling empty JSON arrays bug fixed: error when handling JSON array with square or large brackets in the message bug fixed: error when handling JSON obejcts with double quotation in the message bug fixed: erro...Microsoft All-In-One Code Framework: Visual Studio 2008 Code Samples 2011-01-23: Code samples for Visual Studio 2008MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (3): Instructions for installation: http://www.galasoft.ch/mvvm/installing/manually/ Includes the hotfix templates for Windows Phone 7 development. This is only relevant if you didn't already install the hotfix described at http://blog.galasoft.ch/archive/2010/07/22/mvvm-light-hotfix-for-windows-phone-7-developer-tools-beta.aspx.New ProjectsAsp.Net MvcRoute Debugger Visualizer: Asp.Net MvcRoute Debugger Visualizer is an extension for Visual Studio 2010.It displays the matched route data and datatokens of all defined routes in your mvc applicationAutoLaunch for Windows Embedded Compact (CE): AutoLaunch component for Windows Embedded CE 6.0 and Windows Embedded Compact 7BicubicResizeSilverlight: A client-side Silverlight library for performing a bicubic resize. Cloud Monitoring Studio: Cloud Monitoring Studio provides real-time performance monitoring mechanism for Azure deployed applications/Azure roles with the help of easy-to-understand graphs. Users can configure required performance counters for individual Azure roles through easy-to-use & intuitive GUI.CoreCon for Windows Embedded Compact (CE): CoreCon component for Windows Embedded CE 6.0 and Windows Embedded Compact 7, to simplify the tasks needed to include CoreCon files to the OS image.DokanDiscUtils Bridge: This a a bridge for the Dokan library and the DiscUtils library that allows Any partition/image that discutils can open to be mounted using dokanEverything About My Share: Everything About My ShareExtraordinary Ideas: This project contains some Extra oradinary solutions for difficult software problems.. Article's are in Turkish Language tahircakmak.blogspot.comIE9 Helper: The IE9 Helper is an ASP.NET Helper to makes adding IE9 features simple.ITSolutions: .NET Sandbox SolutionsKitty - Async Server: Kitty is an Async Server with C# and Java versions. It builds on Parallelism to deliver a Internet Scale Server StarterKit.mediainfocollector: Retrieves info from mediafilesMini - Async WebSocket Server: Mini is an Async WebSocket Server with versions in C# and Java. It builds on Parallelism and Kitty to deliver an Internet Scale WebSocket Server StarterKit. MVC N-tier EMR Sample Application: This sample uses EMR to showcase a MVC N-Tier application. It uses WCF to separate the presentation from the DB/Backend.MyPhotoGallery: MyPhotoGallery is a photo gallery developed in ASP.Net MVC.NuGet: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development.OneCode CodeBox: OneCode CodeBoxonecode toolkit: toolsOrchard SSL: Orchard Secured Sockets Layer (SSL) adds new features to force the usage of SSL in sections like authentication pages or the dashboard.OrchardCMS - Lokalizacija: OrchardCMS - Lokalizacija je projekat lokalizacije Orchard CMS-a na srpski, hrvatski, srpskohrvatski, hrvatskosrpski i sve ostale jezike sa podrucija ex-YU. Pokušacemo da iskorisitmo slicnosti u jezicima kako bi jedni drugima pomogli i olakšali lokalizaciju Orchard-a. Pyxis Install Maker: This utility creates single file installs for Pyxis 2 applications.SaleCard: TestSharePoint Social Networking: A Collection of solutions aimed at adding social network to your SharePoint 2010 site. The collection will include web parts, ribbon extensions and other type of solutions that will add or enhance the social networking capabilities of SharePoint. The solution is written in c#.SmartScreenTerminator: Pissed off by the stupid "smart screen" asking you to "remember to protect your password" every time you click someone else's blog link in your Windows Live homepage? Use this three line appication to allow your IE to automatically navigate to the destination page.StreetScene: StreetScene is a sample project showing how to use Microsoft technologies such as ASP.NET, Azure and Silverlight to build rich applications.svmnetx: testtest_project: test projectTweet-Links: Tweet-Links is designed for ultra-fast sending a twitter selected text and files and images.WCMF - Windows Content Management Framework: WCMF is a framework that allows one to build CMS appllications that target the Windows platform (whereas a typical CMS system is usually web based). Used technologies are MEF, WCF, WPF (including Silverlight) and Caliburn.Micro.WebNoteAOP: A sample project for aspect oriented programming with PostSharp. The main purpose is a short introduction. All aspects are made in a very simple way. They should be useful for simple applications. Please keep in mind, that complex problems often require a complex solution, too.

    Read the article

  • CodePlex Daily Summary for Monday, January 17, 2011

    CodePlex Daily Summary for Monday, January 17, 2011Popular ReleasesBloodSim: BloodSim - 1.3.3.1: - Priority update to resolve a bug that was causing Boss damage to ignore Blood Shields entirelyfluentAOP - A Fluent AOP Library for .NET: fluentAOP.1.0.13.bin: fluentAOP.1.0.13.binXsltDb - DotNetNuke Module Builder: 02.00.36: New FeaturesAdvanced database caching. XsltDb now supports SqlCacheDependency. This great feature allows minimizing database load for heavily loaded site pages as home page, latest news, etc. mdo:sql and mdo:xml supports JSON output formats $json each recordset is converted to array of JSON records $jsonrow – first record of first recordset is converted to JSON object mdo:header section. You now able to inject anything you need at page header, top of the form or top of the module. mdo...Rawr: Rawr 4.0.16 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of this release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. W...MvcContrib: an Outer Curve Foundation project: MVC 3 - 3.0.51.0: Please see the Change Log for a complete list of changes. MVC BootCamp Description of the releases: MvcContrib.Release.zip MvcContrib.dll MvcContrib.TestHelper.dll MvcContrib.Extras.Release.zip T4MVC. The extra view engines / controller factories and other functionality which is in the project. This file includes the main MvcContrib assembly. Samples are included in the release. You do not need MvcContrib if you download the Extras.Yahoo! UI Library: YUI Compressor for .Net: Version 1.5.0.0 - Jalthi: Updated solution to VS2010. New: Work Item #4450 - Optional MSBuild task parameter :: Do not error if no files were found. Fixed: Work Item #5028 - Output file encoding is the same as the optional MSBuild task encoding argument. Fixed: Work Item #5824 - MSBuilds where slow, after the first build due to the Current Thread being forced to en-gb, on none en-gb systems. Changed: Work Item #6873 - Project license changed from MS-PL to GPLv2. New: Added all the unit tests from the Java YU...N2 CMS: 2.1.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. 2.1.1 Maintenance release List of changes 2.1 Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open...TweetSharp: TweetSharp v2.0.0.0 - Preview 8: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 8 ChangesUpgraded library references to address reported regressions Third Party Library VersionsHammock v1.1.6: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comVidCoder: 0.8.1: Adds ability to choose an arbitrary range (in seconds or frames) to encode. Adds ability to override the title number in the output file name when enqueing multiple titles. Updated presets: Added iPhone 4, Apple TV 2, fixed some existing presets that should have had weightp=0 or trellis=0 on them. Added {parent} option to auto-name format. Use {parent:2} to refer to a folder 2 levels above the input file. Added {title:2} option to auto-name format. Adds leading zeroes to reach the sp...Microsoft SQL Server Product Samples: Database: AdventureWorks2008R2 without filestream: This download contains a version of the AdventureWorks2008R2 OLTP database without FILESTREAM properties. You do not need to have filestream enabled to attach this database. No additional schema or data changes have been made. To install the version of AdventureWorks2008R2 that includes filestream, use the SR1 installer available here. Prerequisites: Microsoft SQL Server 2008 R2 must be installed. Full-Text Search must be enabled. Installing the AdventureWorks2008R2 OLTP database: 1. Cl...NuGet: NuGet 1.0 RTM: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog.MVC Music Store: MVC Music Store v2.0: This is the 2.0 release of the MVC Music Store Tutorial. This tutorial is updated for ASP.NET MVC 3 and Entity Framework Code-First, and contains fixes and improvements based on feedback and common questions from previous releases. The main download, MvcMusicStore-v2.0.zip, contains everything you need to build the sample application, including A detailed tutorial document in PDF format Assets you will need to build the project, including images, a stylesheet, and a pre-populated databas...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.7 GA Released: Hi, Today we are releasing Visifire 3.6.7 GA with the following feature: * Inlines property has been implemented in Title. Also, this release contains fix for the following bugs: * In Column and Bar chart DataPoint’s label properties were not working as expected at real-time if marker enabled was set to true. * 3D Column and Bar chart were not rendered properly if AxisMinimum property was set in x-axis. You can download Visifire v3.6.7 here. Cheers, Team VisifireASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: paging for the lookup lookup with multiselect changes: the css classes used by the framework where renamed to be more standard the lookup controller requries an item.ascx (no more ViewData["structure"]), and LookupList action renamed to Search all the...??????????: All-In-One Code Framework ??? 2011-01-12: 2011???????All-In-One Code Framework(??) 2011?1??????!!http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?,???????ASP.NET, AJAX, WinForm, Windows Shell????13?Sample Code。???,??????????sample code。 ?????:http://blog.csdn.net/sjb5201/archive/2011/01/13/6135037.aspx ??,??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????,??Email ????patterns & practices – Enterprise Library: Enterprise Library 5.0 - Extensibility Labs: This is a preview release of the Hands-on Labs to help you learn and practice different ways the Enterprise Library can be extended. Learning MapCustom exception handler (estimated time to complete: 1 hr 15 mins) Custom logging trace listener (1 hr) Custom configuration source (registry-based) (30 mins) System requirementsEnterprise Library 5.0 / Unity 2.0 installed SQL Express 2008 installed Visual Studio 2010 Pro (or better) installed AuthorsChris Tavares, Microsoft Corporation ...Orchard Project: Orchard 1.0: Orchard Release Notes Build: 1.0.20 Published: 1/12/2010 How to Install OrchardTo install Orchard using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard.ashx Web PI will detect your hardware environment and install the application. --OR-- Alternatively, to install the release manually, download the Orchard.Web.1.0.20.zip file. http://orchardproject.net/docs/Manually-installing-Orchard-zip-file.ashx The zip contents are pre-built and ready-to-run...Umbraco CMS: Umbraco 4.6.1: The Umbraco 4.6.1 (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains nearly 200 bug fixes since the 4.5.2 release. Getting Started A great place to start is with our Getting Started Guide: Getting Started Guide: http://umbraco.codeplex.com/Project/Download/FileDownload.aspx?DownloadId=197051 Make sure to check the free foundation videos on how to get started building Umbraco sites. They're ...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14986.000: A considerable amount of work has gone into this release: Features: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the ...Facebook C# SDK: 4.2.1: - Authentication bug fixes - Updated Json.Net to version 4.0.0 - BREAKING CHANGE: Removed cookieSupport config setting, now automatic. This download is also availible on NuGet: Facebook FacebookWeb FacebookWebMvcNew ProjectsAddition/Multiplication: It's A simple application developed in <programming language> Use this to perform large but simple Addition and MultiplicationCustom Paging API: This dll contains custom paging method. you can implement this custom paging easily in to your project DanubeSalsaConnection: DanubeSalsaConnectionDNN Menu Provider: You think working with standard DotNetNuke menu providers is a pain? You don't want to study XSLT befor skinning your menu? You are looking for a simple as well as powerful solution? Well, then you are exactly right here! Ejemplos WP7 Silverlight: Los ejemplos en silverlight para WP7 pueden servir de base de las aplicaciones más comunes. Todos los ejemplos son en lenguaje C#.GPS Nerd: Technologies: - ASP.NET MVC, MySQL, NHibernate, Ninject, Google Maps API The GPS Nerd project is a meant to be a platform to learn how to build a website by pulling in various technologies. More Info: See the documentation. Live Site: http://gpsnerd.comNetLirc: .NET LIRC Server with PIC16F628A IR sensornForum For Umbraco: This is the beginning of a forum package for Umbraco, it is built purely using Linq2umbraco so if your an XSLT ninja you are out of luck at the moment. more details to come soon...Orchard Feeds Aggregator Module: Feeds Aggregator Module for Orchard CMSSilverlight for Windows Phone Performance Samples: A collection of Silverlight for Windows Phone code samples highlighting good coding practices.SilvyAcc - Silverlight Accordion Control: This is custom made Silverlight Accordion control.Twesh Ajax: TweshAjax is clientside javascript library for making asynchronous calls to server.WikiPageContentPopulator: This Project allows SharePoint 2010 developers to add wiki page content during the installation of the solution via Feature Receiver WPaolo7: Programmi WPaolo7WPFEdit: WPFEdit is a starter kit for applications that edit files. It contains easy-to-use starter controls and a document management system. WPFEdit is developed with C# / .NET 4.0 / WPF.

    Read the article

  • CodePlex Daily Summary for Monday, January 24, 2011

    CodePlex Daily Summary for Monday, January 24, 2011Popular ReleasesDeveloper Guidance - Onboarding Windows Phone 7: Fuel Tracker Source: Release NotesThis project is almost complete. We'll be making small updates to the code and documentation over the next week or so. We look forward to your feedback. This documentation and accompanying sample application will get you started creating a complete application for Windows Phone 7. You will learn about common developer issues in the context of a simple fuel-tracking application named Fuel Tracker. Some of the tasks that you will learn include the following: Creating a UI that...Password Generator: 2.2: Parallel password generation Password strength calculation ( Same method used by Microsoft here : https://www.microsoft.com/protect/fraud/passwords/checker.aspx ) Minor code refactoringProcess Enactment Tool Framework: PET 1.2.3: Bug fixing release. Introduced installer. General Upgraded to Visual Studio 2010 Created installer PET Wizard Fixed log bug if PET is placed in read-only folder SharePoint Tool Provider Fixed provider crash in case SharePoint.dll is not availableVisual Studio 2010 Architecture Tooling Guidance: Spanish - Architecture Guidance: Francisco Fagas http://geeks.ms/blogs/ffagas, Microsoft Most Valuable Professional (MVP), localized the Visual Studio 2010 Quick Reference Guidance for the Spanish communities, based on http://vsarchitectureguide.codeplex.com/releases/view/47828. Release Notes The guidance is available in a xps-only (default) or complete package. The complete package contains the files in xps, pdf and Office 2007 formats. 2011-01-24 Publish version 1.0 of the Spanish localized bits.ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.2: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager the html generation has been optimized, the html page size is much smaller nowSSH.NET Library: 2011.1.24: No new features in this release, only fixes to issues reported by users: Fixes Fix SFTP path resolution to allow for client to work with glibc and BSD based servers. Close handle when file download completes Fix reusing command object to execute different commands.Facebook Graph Toolkit: Facebook Graph Toolkit 0.6: new Facebook Graph objects: Application, Page, Post, Comment Improved Intellisense documentation new Graph Api connections: albums, photos, posts, feed, home, friends JSON Toolkit upgraded to version 0.9 (beta release) with bug fixes and new features bug fixed: error when handling empty JSON arrays bug fixed: error when handling JSON array with square or large brackets in the message bug fixed: error when handling JSON obejcts with double quotation in the message bug fixed: erro...Microsoft All-In-One Code Framework: Visual Studio 2008 Code Samples 2011-01-23: Code samples for Visual Studio 2008BloodSim: BloodSim - 1.4.0.0: This version requires an update for WControls.dll. - Removed option to use Old Rune Strike - Fixed an issue that was causing Ratings to not properly update when running Progressive simulations - Ability data is now loaded from an XML file in the BloodSim directory that is user editable. This data will be reloaded each time a fresh simulation is run. - Added toggle for showing Graph window. When unchecked, output data will instead be saved to a text file in the BloodSim directory based on the...MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (3): Instructions for installation: http://www.galasoft.ch/mvvm/installing/manually/ Includes the hotfix templates for Windows Phone 7 development. This is only relevant if you didn't already install the hotfix described at http://blog.galasoft.ch/archive/2010/07/22/mvvm-light-hotfix-for-windows-phone-7-developer-tools-beta.aspx.Community Forums NNTP bridge: Community Forums NNTP Bridge V42: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has added some features / bugfixes: Bugfix: Decoding of Subject now also supports multi-line subjects (occurs only if you have very long subjects with non-ASCII characters)Minecraft Tools: Minecraft Topographical Survey 1.3: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds automatic block list updates, so MTS will recognize blocks added in game updates properly rather than drawing them in bright pink. New in this version of MTS: Support for all new blocks added since the Halloween update Auto-update of blockcolors.xml to support future game updates A splash screen that shows while the program searches for upd...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14996.000: New Features: ============= This release is just compiled against the latest release of JetBrains ReSharper 5.1.1766.4 Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes...jqGrid ASP.Net MVC Control: Version 1.2.0.0: jqGrid 3.8 support jquery 1.4 support New and exciting features Many bugfixes Complete separation from the jquery, & jqgrid codeMediaScout: MediaScout 3.0 Preview 4: Update ReleaseCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1: Coding4Fun.Phone.Toolkit v1MFCMAPI: January 2011 Release: Build: 6.0.0.1024 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeAutoLoL: AutoLoL v1.5.4: Added champion: Renekton Removed automatic file association Fix: The recent files combobox didn't always open a file when an item was selected Fix: Removing a recently opened file caused an errorDotNetNuke® Community Edition: 05.06.01: Major Highlights Fixed issue to remove preCondition checks when upgrading to .Net 4.0 Fixed issue where some valid domains were failing email validation checks. Fixed issue where editing Host menu page settings assigns the page to a Portal. Fixed issue which caused XHTML validation problems in 5.6.0 Fixed issue where an aspx page in any subfolder was inaccessible. Fixed issue where Config.Touch method signature had an unintentional breaking change in 5.6.0 Fixed issue which caused...iTracker Asp.Net Starter Kit: Version 3.0.0: This is the inital release of the version 3.0.0 Visual Studio 2010 (.Net 4.0) remake of the ITracker application. I connsider this a working, stable application but since there are still some features missing to make it "complete" I'm leaving it listed as a "beta" release. I am hoping to make it feature complete for v3.1.0 but anything is possible.New ProjectsAIMP2 .NET Interop Plugin: AIMP2 .NET Interop Plugin allows to write plugin for AIMP2 with managed code (C#, VB and so on).asp.net c# website: hot millions project is an asp.net c# sql express website where you can login and book and order your menu items. This project is built in Visual studio 2008 with asp.net c# sql express editionAutomatic Build Updater: A small tool with scripts to show the recent build of your program on your homepage or blog. It works fully automatically and is easy to use. Works with each IDE which supports Build-Events.BurakoNET: Burako OnLineDelNet: Tool created in C # to automate the development process. With this tool, you do not need to spend time with the creation of classes of connection, data access layer, view or update data with Windows Forms. Everything is here, ready.Droid Builder: Droid Builder is a WPF based application that can help Android ROM maker to create customized ROM. The basic functions of Droid Build are: 1. Deodex 2. Packaging 3. Signing In future, Droid Builder will provide more function on Android ROM customization.eatables: Eatables 2011Food information system: Food information system makes it easier for content providers to deliver information about food producers, contents and information about quality, recipes, allergy and other considerations to the consumers. ForceHttps: Very simple httpModule to ensure that all http requests are https. 1. Drop the dll into your website's bin directory 2. Update httpModules section of your web.config to reference the dll 3. Make sure your Web Server can handle SSL requests for the URL ALL http requests will be redirected as https.Frolic Game Engine for .NET: The Frolic game engine is an attempt at creating a retained style game engine that is agnostic to the rendering technology, allowing for easier inplementations of rendering engines for various graphics layers.Import VCF to MS Outlook: simple tools to import many *.vcf files to default contact in MS OutlookLe blog à TiK: Le blog à TiK is a blog engine written for the Windows Azure platformLearning CPP: Learning CPP.MinConsole: A minimilastic console application with configurable logging and debuggingMineSweeperChallenge: C# programming exercise. Simulates a given number of minesweeper games using a given ISweeper implementation (or use the step by step mode to study how the ISweeper implementations work). Create your own implementation and see how it compares to other implementations.MvcCss: MvcCss brings the convention-based simplicity of MVC to CSS.Natur Map Editor: Natur allows you to easily create and manage maps in 3D using the Xna framework. As you build your map, you can enter simulation mode at any time; this will activate bounds, physics, and any game logic such as animations and triggers.OneGames Open Framework: Projeto open-source da OneGames de desenvolvimento de jogos 2D com a engine SpriteCraft(tm).QQFindX: QQFindXsadd.practical.approach: SADD workshop is a project testorage to demonstrate practical approach of sadd while Lessons Learned site was developing. ?????? ???? ?????????? ??????????? ??? ?? ???????? ?????????? SADD ??? ???????? ????? "????????? ??????", ??????????? ????????? ??????????????? ?????? ?????.Seesmic Feed Reader: A simple plugin for Seesmic Desktop 2 that allows you to read syndication feeds (Rss 2.0 and Atom 1.0) inside Seesmic.Simple Farseer physics platform: Sample described on rabidlion.comSIN Generator: Social Insurance Number (SIN) Generator is a utility designed to generate SIN numbers to testing application software. It uses SIN generation algorithm provided on fakenamegenerator.com It is developed in C# and is meant for application testing ONLY!UsingLib: A library of automatically removed utilities: 1.Changing cursor to hourglass in Windows Forms 2.Logging It's developed in C#WP7Contrib: WP7 Contrib is a set of components to help build WP7 Apps. It can be plugged into MVVM Light or used as separate components in your App. Our goal is to provide a set of tools and patterns that help WP7 developers.

    Read the article

  • CodePlex Daily Summary for Thursday, March 03, 2011

    CodePlex Daily Summary for Thursday, March 03, 2011Popular ReleasesDDRMenu: 01.99.00 (aka 2.0 beta 1): First beta of version 2.0.AutoLoL: AutoLoL v1.6.0: Implemented 3D Model / Skin viewer Added JarvanIV and Maokai Fixed Renekton and Karma image sizes Added more hotkeys to Auto Chat Fix: Update information is now cached daily (instead of forever)Chirpy - VS Add In For Handling Js, Css, DotLess, and T4 Files: Margogype Chirpy (ver 2.0): Chirpy loves Americans. Chirpy hates Americanos.Document.Editor: 2011.9: Whats new for Document.Editor 2011.9: New Templates System New Plug-in System New Replace dialog New reset settings Minor Bug Fix's, improvements and speed upsTortoiseHg: TortoiseHg 2.0: TortoiseHg 2.0 is a complete rewrite of TortoiseHg 1.1, switching from PyGtk to PyQtSandcastle Help File Builder: SHFB v1.9.2.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. NOTE: The included help file and the online help have not been completely updated to reflect all changes in this release. A refresh will be issue...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...SQL Server Compact Toolbox: Standalone version 2.0 for SQL Server Compact 4.0: Download the Visual Studio add-in for SQL Server Compact 4.0 and 3.5 from here Standalone version of (most of) the same functionality as the add-in, for SQL Server Compact 4.0. Useful for anyone not having Visual Studio Professional or higher installed. Requires .NET 4.0. Any feedback much appreciated.Claims Based Identity & Access Control Guide: Drop 1 - Claims Identity Guide V2: Highlights of drop #1 This is the first drop of the new "Claims Identity Guide" edition. In this release you will find: All previous samples updated and enhanced. All code upgraded to .NET 4 and Visual Studio 2010. Extensive cleanup. Refactored Simulated Issuers: each solution now gets its own issuers. This results in much cleaner and simpler to understand code. Added Single Sign Out support. Added first sample using ACS ("ACS as a Federation Provider"). This sample extends the ori...Simple Notify: Simple Notify Beta 2011-02-25: Feature: host the service with a single click in console Feature: host the service as a windows service Feature: notification cient application Feature: push client application Feature: push notifications from your powershell script Feature: C# wrapper libraries for your applicationsMono.Addins: Mono.Addins 0.6: The 0.6 release of Mono.Addins includes many improvements, bug fixes and new features: Add-in engine Add-in name and description can now be localized. There are new custom attributes for defining them, and can also be specified as xml elements in an add-in manifest instead of attributes. Support for custom add-in properties. It is now possible to specify arbitrary properties in add-ins, which can be queried at install time (using the Mono.Addins.Setup API) or at run-time. Custom extensio...Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.New ProjectsARCHFORMEMVC - Just a reference MVC architecture for me and perhaps you: ARCHFORMEMVC stands for giving me (and perhaps you) a default architecture for handling Cross Cutting Concerns and a quick way to start new project using MVCBackupLib: SingularityShift.BackupLib provides a framework for an application's backup needs. It offers common interfaces, abstract implementations, and many base classes ready for use in any .NET application. It can be easily extended to use any backup method you might require.ComponentModel: ComponentModel provides a simple API for building an application based on a hierarchy of various types of components, which are then extended to fill essentially any need. It attempts to simplify much of the work of building such a system.DataModels: DataModels is a project which aims to allow for easy reuse of specific data models using a very simple API. euler 14 problem: euler 14 problemGameLib: GameLib is a library for rapid game tool development. It offers an API and many abstract/concrete implementations for referencing and managing a game and its modifications. It is the driving force behind FOMS (Fallout Mod Studio).GSH Reasoner: GSHR (Gloriously Slow Haskell Reasoner) is a simple, partially incomplete and very slow reasoner for OWL 2 ontologies which uses rules for inference and consistency checking. Written in Haskell.internal DataBase for C# and .Net/Mono: This Project will create a DataBase which can only be used intern in a programm, so there is no need to have a DB installed on the users pc. SQL Support will come too. So u can eaasily migrate existing projects.Morro.VPN: morro bay various netMovieManager: Movie manager is a tool to keep you updated about movie series you watch. First step is to create your movie series database. Next you select episodes you already watched. Program will automatically show you new episodes, air dates of the upcoming episodes.NHL.App: NHL.App makes it easier for people to browse news in the NHL and current standings in a format that is nice and easy on the eyes. It is developed in C# with Visual Studio 2010 Express for Windows Phone.RegexRenamer: RegexRenamer allows file moving and renaming using .NET regular expressions. It supports regular expression chains so files can be renamed/moved in multiple steps. It is developed in C# using .NET Framework 4 and WPF.Research: Personal research projectSAB BizTalk Archiving Pipeline Component: The SAB BizTalk Archiving Pipeline Component can be added to any stage of receive and send ports to archive processed messages to file locations.Simple Configuration Facade: SingularityShift.Preferences is an abstraction layer over any configuration library allowing you to keep whichever configuration library you choose out of your main code entirely, so you are free to change it later without repercussion or the need to make extensive code changes.Simple Dependency Injection Facade: SDIF allows decoupling not only from your dependencies, but also from the framework that injects them. It is a lightweight layer between your code and the DI framework that wires up your dependencies, so that you can easily adapt to other frameworks as necessary.Simple Json: A simple set of utilities for json and rest.SingularityShift.Common: SingularityShift.Common is where we put all of the code that we use in many or all of our other libraries and applications. This obviously helps us, but is also designed to help other developers by providing these common interfaces and classes for use in other projects as well.TLDRML: Python/JSON inspired markup language designed to be extremely terse.TripleA for Silverlight: Axis and allies port from the Java versionWCF Credentials Manager in WPF (MVVM): This is a WPF (MVVM) version of the IDesign WCF credentials manager. It provides a more responsive user interface for managing users and roles in applications that use the ASP.NET membership and role providers.Windawesome: A highly customizable dynamic window manager for Windows, which works on top of explorer.exe and NOT as a shell replacement. Written in C# and scriptable and pluggable in IronRuby, IronPython and any .NET language that compiles down to an assembly.Zack's Fiasco - eWallet to KeePass: Convert an eWallet export to a KeePass 2.x XML file, which can be imported into KeePass 2.x

    Read the article

  • CodePlex Daily Summary for Sunday, January 16, 2011

    CodePlex Daily Summary for Sunday, January 16, 2011Popular ReleasesVidCoder: 0.8.1: Adds ability to choose an arbitrary range (in seconds or frames) to encode. Adds ability to override the title number in the output file name when enqueing multiple titles. Updated presets: Added iPhone 4, Apple TV 2, fixed some existing presets that should have had weightp=0 or trellis=0 on them. Added {parent} option to auto-name format. Use {parent:2} to refer to a folder 2 levels above the input file. Added {title:2} option to auto-name format. Adds leading zeroes to reach the sp...Network Asset Manager: Release 1.0.9: Release notes for version 1.0.9New FeaturesAdded new report subsystem for better report handling and report history management. Added support for Network adapter discovery Added reports for low disk space, disk utilization, hardware, OS installation Some application fixes. Bug fixesArtifact ID 2979655 : Fixed issue with installed software collection on windows 64 bit. (Thanks to nielsvdc for this patch) NotesPrevious versions of NAM installations need to be manually uninstalled bef...mytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.52.0 beta 2: New MVC3 RTM WEB.mytrip.mvc 1.0.52.0 Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) SRC.mytrip.mvc 1.0.52.0 System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.5, MVC3 RTM WARNING For run and debug SRC.mytrip.mvc 1.0.52.0 download and...BloodSim: BloodSim - 1.3.3.0: NOTE: If you have a previous version of BloodSim, you must update WControls.dll from the Required DLLs download. - Removed average stats from main window as this is no longer necessary - Added ability to name a set of runs that will show up in the title bar of the graph window - Added ability to run progressive simulation sets, increasing up to 2 chosen stats by a value each time - Added option to set the amount that Death Strike heals for on the Last 5s Damage - Added option for Blood Shiel...NuGet: NuGet 1.0 RTM: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog.MVC Music Store: MVC Music Store v2.0: This is the 2.0 release of the MVC Music Store Tutorial. This tutorial is updated for ASP.NET MVC 3 and Entity Framework Code-First, and contains fixes and improvements based on feedback and common questions from previous releases. The main download, MvcMusicStore-v2.0.zip, contains everything you need to build the sample application, including A detailed tutorial document in PDF format Assets you will need to build the project, including images, a stylesheet, and a pre-populated databas...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.7 GA Released: Hi, Today we are releasing Visifire 3.6.7 GA with the following feature: * Inlines property has been implemented in Title. Also, this release contains fix for the following bugs: * In Column and Bar chart DataPoint’s label properties were not working as expected at real-time if marker enabled was set to true. * 3D Column and Bar chart were not rendered properly if AxisMinimum property was set in x-axis. You can download Visifire v3.6.7 here. Cheers, Team VisifireFluent Validation for .NET: 2.0: Changes since 2.0 RC Fix typo in the name of FallbackAwareResourceAccessorBuilder Fix issue #7062 - allow validator selectors to work against nullable properties with overriden names. Fix error in German localization. Better support for client-side validation messages in MVC integration. All changes since 1.3 Allow custom MVC ModelValidators to be added to the FVModelValidatorProvider Support resource provider for custom property validators through the new IResourceAccessorBuilder ...EnhSim: EnhSim 2.3.2 ALPHA: 2.3.2 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Quick update to ...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: paging for the lookup lookup with multiselect changes: the css classes used by the framework where renamed to be more standard the lookup controller requries an item.ascx (no more ViewData["structure"]), and LookupList action renamed to Search all the...pwTools: pwTools: pwTools SVN Downloaderthe downloader contains three *.bat files pwtools-changelog.bat creates a changelog.txt file containing the change notes pwtools-binaries.bat is downloading the latest stable binary files pwtools-source.bat is downloading the latest project files (including source code and binaries)??????????: All-In-One Code Framework ??? 2011-01-12: 2011???????All-In-One Code Framework(??) 2011?1??????!!http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?,???????ASP.NET, AJAX, WinForm, Windows Shell????13?Sample Code。???,??????????sample code。 ?????:http://blog.csdn.net/sjb5201/archive/2011/01/13/6135037.aspx ??,??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????,??Email ????patterns & practices – Enterprise Library: Enterprise Library 5.0 - Extensibility Labs: This is a preview release of the Hands-on Labs to help you learn and practice different ways the Enterprise Library can be extended. Learning MapCustom exception handler (estimated time to complete: 1 hr 15 mins) Custom logging trace listener (1 hr) Custom configuration source (registry-based) (30 mins) System requirementsEnterprise Library 5.0 / Unity 2.0 installed SQL Express 2008 installed Visual Studio 2010 Pro (or better) installed AuthorsChris Tavares, Microsoft Corporation ...Orchard Project: Orchard 1.0: Orchard Release Notes Build: 1.0.20 Published: 1/12/2010 How to Install OrchardTo install Orchard using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard.ashx Web PI will detect your hardware environment and install the application. --OR-- Alternatively, to install the release manually, download the Orchard.Web.1.0.20.zip file. http://orchardproject.net/docs/Manually-installing-Orchard-zip-file.ashx The zip contents are pre-built and ready-to-run...Umbraco CMS: Umbraco 4.6.1: The Umbraco 4.6.1 (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains nearly 200 bug fixes since the 4.5.2 release. Getting Started A great place to start is with our Getting Started Guide: Getting Started Guide: http://umbraco.codeplex.com/Project/Download/FileDownload.aspx?DownloadId=197051 Make sure to check the free foundation videos on how to get started building Umbraco sites. They're ...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14986.000: A considerable amount of work has gone into this release: Features: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the ...Facebook C# SDK: 4.2.1: - Authentication bug fixes - Updated Json.Net to version 4.0.0 - BREAKING CHANGE: Removed cookieSupport config setting, now automatic. This download is also availible on NuGet: Facebook FacebookWeb FacebookWebMvcHawkeye - The .Net Runtime Object Editor: Hawkeye 1.2.5: In the case you are running an x86 Windows and you installed Release 1.2.4, you should consider upgrading to this release (1.2.5) as it appears Hawkeye is broken on x86 OS. I apologize for the inconvenience, but it appears Hawkeye 1.2.4 (and probably previous versions) doesn't run on x86 Windows (See issue http://hawkeye.codeplex.com/workitem/7791). This maintenance release fixes this broken behavior. This release comes in two flavors: Hawkeye.125.N2 is the standard .NET 2 build, was compile...Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (January 2011): Another release build for daily use; it contains many new features, enhanced compatibility with latest PHP opensource applications and several issue fixes. To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phalanger. Changes made within this release include following: New features available only in Phalanger. Full support of Multi-Script-Assemblies was implemented; you can build your application into several DLLs now. Deploy them separately t...AutoLoL: AutoLoL v1.5.3: A message will be displayed when there's an update available Shows a list of recent mastery files in the Editor Tab (requested by quite a few people) Updater: Update information is now scrollable Added a buton to launch AutoLoL after updating is finished Updated the UI to match that of AutoLoL Fix: Detects and resolves 'Read Only' state on Version.xmlNew ProjectsA simple grammar based intellisense for Html / JavaScript: A JavaScript library to enable intellisense based on a grammar. Example: Sentence -> Greeting | Command Greeting -> "hello" Name Name -> string Command -> "execute " commandName commandName -> "test" | "build" | "verify" Then users will be guided with suggestions as they typeAif message header editor (AMHE): The Aif message header editor allows the developer to change the Aif message-header information in the Xml-document.Arabic Controls For WP7: This project provides a few right-to-left controls and an engine to render Arabic characters for WP7 due to the partial Arabic support.ASIVeste: No description availableAzureFiddlerCore: AzureFiddlerCore allows an instance of Fiddler to be hosted in an Azure application. It will export any requests sent through its special proxies to a SAZ file stored in Azure Blob storage, for you to download. It is written in C# using FiddlerCore.Ermek CMS: CS Tournament CMS (Claims Management System).Erqilu: Erqilu WebSite.HHChat: A client-server chat program allowing users to have a list of contacts with whom they can chat either individually or in groups. Will support sending files and emoticons. Developed in C# using WPF, MVVM and WCF.MFC GraphViewer: mfc graph algorithm toolMovieStorePDT: MovieStore-PruebaDeTecnología es un proyecto donde probaremos las tecnologías de desarrollo de software (ASP.NET MVC, C#, jQuery y EF) que utilizaremos en proyectos actuales y siguientes.NLib: NLib it's a Helper Library. It's developed in C#. Documentation will coming soonOrchard Tokens Module: Tokens module for orchard.Phatnotes to Evernote Converter: Convert your Phatnotes (Version 5) to Evernote. Phatnotes is a tool that syncs notes from PC to a windows-mobile phone or IPhone. I personally switched to an Android phone, and needed to convert my Phatnotes, so I chose Evernote. Sapit - Small And Powerful Integration Toolkit: Sapit is an implementation of integration patterns and techniques. Included are Cache, Circuit Breaker, Response Time Throttle and Timeout. Apply these to your code using Aspect Oriented Programming (AOP) via Castle Windsor, PostSharp or Unity Application Block. More to come ...SimpleMVC: SimpleMVC is a lightweight .NET framework for creating applications based upon the classic Model, View and Controller concept.SMSRules: The most comprehensive SMS management tool which gives you an option to do what you always wanted to do. Some of the things which it enables you to do!! 1. Filter all the incoming messages and Move/Copy them to a folder 2. Create/Delete user folders. 3. Hide private messages. speakyourmind: A simple desktop client written in .NET that posts updates to Social Networking Sites such as Twitter and Facebook. The objective of creating this project is to learn the various social networking APIs available. (Currently only twitter support is added)String Toolkit.NET: Projeto para gerar string a partir de valores numericosTraceView Log Visualizer: TraceViewWallyMap & FindWally: Silverlight 4 and WP7 simple georeference applicationswp7 destiny: wp7 destinywp7 minesweeper: wp7 minesweeper

    Read the article

  • CodePlex Daily Summary for Saturday, August 18, 2012

    CodePlex Daily Summary for Saturday, August 18, 2012Popular ReleasesExtAspNet: ExtAspNet v3.1.9: +2012-08-18 v3.1.9 -??other/addtab.aspx???JS???BoundField??Tooltip???(Dennis_Liu)。 +??Window?GetShowReference???????????????(︶????、????、???、??~)。 -?????JavaScript?????,??????HTML????????。 -??HtmlNodeBuilder????????????????JavaScript??。 -??????WindowField、LinkButton、HyperLink????????????????????????????。 -???????????grid/griddynamiccolumns2.aspx(?????)。 -?????Type??Reset?????,??????????????????(e??)。 -?????????????????????。 -?????????int,short,double??????????(???)。 +?Window????Ge...XDA ROM HUB: Release v0.9.3: ChangelogAdded a new UI Removed unnecessary features Fixed a lot of bugs Adding new firmwares (Please help me) Added a new app for Android Ability to backup apps to the SD Card Ability to create Nandroid backups without a PC Ability to backup apps and restore from CWM Improved download manager Now supporting pause and resume Converting Bytes to MegaBytes Improved dialogs Removed support for 7z files Changed installer Known BugsDialog message will always appear when clic...Task Card Creator 2010: TaskCardCreator2010 4.0.2.0: What's New: UI/UX improved using a contextual ribbon tab for reports Finishing the "new 4.0 UI" Report template help improved New project branch to support TFS 2012: http://taskcardcreator2012.codeplex.com User interface made more modern (4.0.1.0) Smarter algorithm used for report generation (4.0.1.0) Quality setting added (4.0.1.0) Terms harmonized (4.0.1.0) Miscellaneous optimizations (4.0.1.0) Fixed critical issue introduced in 4.0.0.0 (4.0.1.0)AcDown????? - AcDown Downloader Framework: AcDown????? v4.0.1: ?? ●AcDown??????????、??、??????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ??:????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? ??????????????,??????????: ??"AcDown?????"????????? ...Fluent Validation for .NET: 3.4: Changes since 3.3: Make ValidationResut.IsValid virtual Add private no-arg ctor to ValidationFailure to help with serialization Add Turkish error messages Work-around for reflection bug in .NET 4.5 that caused VerificationExceptions Assemblies are now unsigned to ease with versioning/upgrades (especially where other frameworks depend on FV) (Note if you need signed assemblies then you can use the following NuGet packages: FluentValidation-signed, FluentValidation.MVC3-signed, FluentV...fastJSON: v2.0.2: - bug fix $types and arraysAssaultCube Reloaded: 2.5.3 Unnamed Fixed: If you are using deltas, download 2.5.2 first, then overwrite with the delta packages. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your ...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.6.1: Bug Fix release Bug Fixes Better support for transparent images IsFrozen respected if not bound to corrected deadlock stateWPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.7: Version: 2.5.0.7 (Milestone 7): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Add CollectionHelper.GetNextElementOrDefault method. InfoMan: Support creating a new email and saving it in the Send b...Diablo III Drop Statistics Service: D3DSS 1.0.1: ??????IP??。 ??????????,??????????。myCollections: Version 2.2.3.0: New in this version : Added setup package. Added Amazon Spain for Apps, Books, Games, Movie, Music, Nds and Tvshow. Added TVDB Spain for Tvshow. Added TMDB Spain for Movies. Added Auto rename files from title. Added more filters when adding files (vob,mpls,ifo...) Improve Books author and Music Artist Credits. Rewrite find duplicates for better performance. You can now add Custom link to items. You can now add type directly from the type list using right mouse button. Bug ...Player Framework by Microsoft: Player Framework for Windows 8 Preview 5 (Refresh): Support for Windows 8 and Visual Studio RTM Support for Smooth Streaming SDK beta 2 Support for live playback New bitrate meter and SD/HD indicators Auto smooth streaming track restriction for snapped mode to conserve bandwidth New "Go Live" button and SeekToLive API Support for offset start times Support for Live position unique from end time Support for multiple audio streams (smooth and progressive content) Improved intellisense in JS version NEW TO PREVIEW 5 REFRESH:Req...TFS Workbench: TFS Workbench v2.2.0.10: Compiled installers for TFS Workbench 2.2.0.10 Bug Fix Fixed bug that stopped the change workspace action from working.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.60: Allow for CSS3 grid-column and grid-row repeat syntax. Provide option for -analyze scope-report output to be in XML for easier programmatic processing; also allow for report to be saved to a separate output file.ClosedXML - The easy way to OpenXML: ClosedXML 0.67.2: v0.67.2 Fix when copying conditional formats with relative formulas v0.67.1 Misc fixes to the conditional formats v0.67.0 Conditional formats now accept formulas. Major performance improvement when opening files with merged ranges. Misc fixes.Umbraco CMS: Umbraco 4.8.1: Whats newBug fixes: Fixed: When upgrading to 4.8.0, the database upgrade didn't run Update: unfortunately, upgrading with SQLCE is problematic, there's a workaround here: http://bit.ly/TEmMJN The changes to the <imaging> section in umbracoSettings.config caused errors when you didn't apply them during the upgrade. Defaults will now be used if any keys are missing Scheduled unpublishes now only unpublishes nodes set to published rather than newest Work item: 30937 - Fixed problem with Fi...patterns & practices - Unity: Unity 3.0 for .NET 4.5 and WinRT - Preview: The Unity 3.0.1208.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. This is an updated version of the port after the .NET Framework 4.5 and Windows 8 have RTM'ed. Please see the Release Notes Providing feedback Post your feedback on the Unity forum Submit and vote on new features for Unity on our Uservoice site.Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 2.0.0 for VS11: Self-Tracking Entity Generator for WPF and Silverlight v 2.0.0 for Entity Framework 5.0 and Visual Studio 2012NPOI: NPOI 2.0: New features a. Implement OpenXml4Net (same as System.Packaging from Microsoft). It supports both .NET 2.0 and .NET 4.0 b. Excel 2007 read/write library (NPOI.XSSF) c. Word 2007 read/write library(NPOI.XWPF) d. NPOI.SS namespace becomes the interface shared between XSSF and HSSF e. Load xlsx template and save as new xlsx file (partially supported) f. Diagonal line in cell both in xls and xlsx g. Support isRightToLeft and setRightToLeft on the common spreadsheet Sheet interface, as per existin...BugNET Issue Tracker: BugNET 1.1: This release includes bug fixes from the 1.0 release for email notifications, RSS feeds, and several other issues. Please see the change log for a full list of changes. http://support.bugnetproject.com/Projects/ReleaseNotes.aspx?pid=1&m=76 Upgrade Notes The following changes to the web.config in the profile section have occurred: Removed <add name="NotificationTypes" type="String" defaultValue="Email" customProviderData="NotificationTypes;nvarchar;255" />Added <add name="ReceiveEmailNotifi...New Projectscocos2d simpledemo: simple demo cocos2dDiscuzViet: Discuz Vi?t Nam - discuz.vnEaseSettings: EaseSettings is a library designed to allow easy usage of settings with a highly structured in treenode-form.Face Detection & Recognition: Face Detection & Recognition project. It provide an interface for face detection and recognition FIM 2010 GoogleApps MA: Forefront Identity Manager 2010 Management Agent for Google Apps. You can synchronize users between Google Apps and Forefront Identity Manager 2010.Get System Info: Get System Information is an open source project licensed under the GNU Public License v2. This project allows you to view information about your system.go launcher: Go launchergrOOvy language (the spec): A formal specification of what the Groovy Language does.JavaScript Prototype Extension: It is a standalone JavaScript extension based on JavaScript prototype directly, to make developers use JS like C# or Java.Jump N Roll Windows Phone 7: Jump n Roll is a remake of the classic amiga game for windows phone 7, using vb.net and XNA. Version 1 is in a working but unfinished state.KingOfHorses: This is a Capstone Project from FPT University.Lan House Manager: Trabalho de conclusão de curso da faculdade de Ciências da Computação 2009 UNISANTA. -.NET -C# -WPF -ASP.NET MVC -Entity Framework -SQL ServerMy source code: This project contains my source code.MySimpleProjectForKudu: Cool stuffNWP INTRANET: NWP Intranet, a complete and useful intranet application for a wide cainds of companies.P.O.W. - PowerShell on the Web - DevOps Automation Portal: The PowerShell DevOps Portal provides a SharePoint like experience but centralized around the execution of PowerShell scripts to automate DevOps oriented tasks.Piwik for Microsoft Silverlight Analytics Framework: Piwik for Micorsoft Silverlight Analytics adds Piwik support to the MSAFPlaygroundSite: pluralsight tutSkewboid Approach to Pareto Relaxation and Filtering: For multi-objective decision-making and optimization - an adjustment parameter, alpha, is added to the conventional determination of Pareto optimality.Software Factories: Software Factory Generatorsspaceship cocos2dx demo: testing onlySpring_DWR: Present day I had a requirement where using Spring and Direct web remoting. testgit08172012git01: yuitesttom08172012tfs01: ytryytrtouchdragdemo: touch drag demoVirtual Pilot Client: An open-source pilot client for the VATSIM network. See discussions at http://forums.vatsim.net/viewforum.php?f=124 Visual Studio IDE Service - DTE: Visual Studio ServicesWCF AOP Sample: This project contains a simple implementation of AOP for WCF. It illustrates how to do simple logging and param masking using basic WCF extensions and Unity.WeatherApp: Aplicación para ver el clima????: ??????????,????

    Read the article

  • CodePlex Daily Summary for Thursday, November 22, 2012

    CodePlex Daily Summary for Thursday, November 22, 2012Popular ReleasesStackBuilder: StackBuilder 1.0.11.0: +Added Box/Case analysis...VidCoder: 1.4.7 Beta: Added view modes to the Preview window. Now you can see the image in 1:1 or in "Corners" mode to show a close-up of cropping results. Added the ability to set a custom completion sound. Gave the encoding settings command bar a more distinctive background color and extended it to the whole width of the window. Added the preview button to the command bar. Rearranged UI in Video tab and added back the section headers. Added the "Most" choice for the advanced x264 analysis option. Updat...ServiceMon - Extensible Real-time, Service Monitoring Utility for Windows: ServiceMon Release 1.2.0.58: Auto-uploaded from build serverImapX 2: ImapX 2.0.0.6: An updated release of the ImapX 2 library, containing many bugfixes for both, the library and the sample application.WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v3.0: DTOs and Assemblers can be generated inside project folders! Choose the types you want to generate! Support for Visual Studio 2012 !!! Support for new Entity Framework EDMX (format used by VS2012) ! Support for Enum Types! Optional automatic check for updates! Added the following methods to Assemblers! IEnumerable<DTO>.ToEntities() : ICollection<Entity> IEnumerable<Entity>.ToDTOs() : ICollection<DTO> Indicate class identifier for DTOs and Assemblers! Cleaner Assemblers code....mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...Bundle Transformer - a modular extension for ASP.NET Web Optimization Framework: Bundle Transformer 1.6.10: Version: 1.6.10 Published: 11/18/2012 Now almost all of the Bundle Transformer's assemblies is signed (except BundleTransformer.Yui.dll); In BundleTransformer.SassAndScss the SassAndCoffee.Ruby library was replaced by my own implementation of the Sass- and SCSS-compiler (based on code of the SassAndCoffee.Ruby library version 2.0.2.0); In BundleTransformer.CoffeeScript added support of CoffeeScript version 1.4.0-3; In BundleTransformer.TypeScript added support of TypeScript version 0....ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????(◇?◆:)。 -???????????????????RecoverPropertiesFromJObject????(〓?〓、????、??、Vian_Pan)。 -????????????,?????????????,???SelectedValueArray???????(sam.chang)。 -??Alert.Show???????????(swtseaman)。 -???????????????,??Icon??IconUrl????(swtseaman)。 -?????????TimePicker(??)。 -?????????,??/res.axd?css=blue.css&v=1。 -????????,?????????????,???????。 -????MenuCheckBox(???????)。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Paint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...New Projects1122case1325: It is a codeplex project1122case1327: Never be so greedy Accommodation Portal: This is a skeleton web site for holiday home owners, who wishes to rent their holiday accommodations to visitors from around the world. Analog Clock: This is project contains analog clock made in win forms.Android Socket Plus: ????Android??????。???????Android???????Socket???,?????????(?PC?Windows????????)??????Socket???,??,????????????;??????????????Socket???,??????????????Socket???。Bancosol: PFCBig Data Twitter Demo: This demo analyzes tweets in real-time, even including a dashboard. The tweets are also archived in Azure DB/Blob and Hadoop where Excel can be used for BI!Cloud For Science: This project serves as issue tracker for C4S components, and is used by participants of the C4S project. cwt: cwtDiary Application for Elementary Student: A Simple Diary Application Made for Elementary Student. Dice Dreams: Dice Dreams Dice Dreams is a dice game , the player must get 1.000.000 point to win, you start with 100.000 point. Dynamic Entity Framework Filtering: Generates linq to Entity Framework Queries by examining the EF data model, thus allowing for code reduction for queries to commonly requested entities.EazyErp: Enterprise Resource Planning System of Vf AsiaGoPlay: Tooke - add a project description here...HMyBlog: myblogHumanitarian Toolbox: This project is the publication site for bits built by the Humanitarian Toolbox ( http://humanitariantoolbox.net/).Impulse Media Player: Impulse Media Player is the ultimate media player for WindowsInspiration.Web: Description: A simple (but entertaining) ASP.NET MVC (C#) project to suggest random code names for projects. Intended audience: People who need a name (any name) to get started with their projects. Application written during Webcamp Singapore (4th Jun 2010 - 5th Jun 2010).iPictureUploader: Simple tool to upload images onto WEB and share via blogs/forums/etc lugionline: test projectMosaic Snake 3D: A clone of the popular Snake game for Windows 8. It contains a simple 3D engine based on SharpDX and is completely written in C# and Xaml.Outage Display: A simple web-based outage displayPrestaShop free Electronic Brown Shop Template - ModuleBazaar: Check out Latest and Best Featured PrestaShop Templates, Modules Magento Extensions, Opencart Extensions, Clone scripts from ModuleBazaarRackspace Cloud Files Manager: A simple Rackspace Cloud Files manager for static websitesRoll The Dice: Roll The Dice is a simple game developed by Erika Enggar Savitri and Queen Anugerah Aguslia who are currently studying Information System at Ma Chung UniversityRussian IDM: Russian IDM is free IdM solutionshootout: Comparing the speed of different languages and the constructs available within those languagessmart messaging connector: Sending fax from a PrintDocument or a file. Sending broadcast fax. Managing (Pause/Resume/Restart) current fax job. Managing configuration of the fax serverTeen Diary: Teen Diary Software - FREEWARE SOFTWARE. - SIMPLE, LIGHTWEIGHT, PORTABLE, COMPATIBLE. - made from .NET FRAMEWORK languange with XML data. Tekapo: Tekapo is a wizard style application that will help you manage your digital photos. Most digital cameras will store images as JPEG files. Information about the camera and how the camera has taken the photo is placed into the JPEG file along with the image data. One of the pieces of information stored is the date and time that the photo was taken. Tekapo uses the picture taken date to organise the photos.The Byte Kitchen's Open Sources: This project is related to The Byte Kitchen Blog (at thebytekitchen.com). It typically deals with Windows 8 apps, DirectX, and the Kinect for Windows.TheDiary: daily-self journalWCFsample: WCFsampleXNA Game Editor: This project will has familiar features like Unity Engine Editor.

    Read the article

  • Converting Encrypted Values

    - by Johnm
    Your database has been protecting sensitive data at rest using the cell-level encryption features of SQL Server for quite sometime. The employees in the auditing department have been inviting you to their after-work gatherings and buying you drinks. Thousands of customers implicitly include you in their prayers of thanks giving as their identities remain safe in your company's database. The cipher text resting snuggly in a column of the varbinary data type is great for security; but it can create some interesting challenges when interacting with other data types such as the XML data type. The XML data type is one that is often used as a message type for the Service Broker feature of SQL Server. It also can be an interesting data type to capture for auditing or integrating with external systems. The challenge that cipher text presents is that the need for decryption remains even after it has experienced its XML metamorphosis. Quite an interesting challenge nonetheless; but fear not. There is a solution. To simulate this scenario, we first will want to create a plain text value for us to encrypt. We will do this by creating a variable to store our plain text value: -- set plain text value DECLARE @PlainText NVARCHAR(255); SET @PlainText = 'This is plain text to encrypt'; The next step will be to create a variable that will store the cipher text that is generated from the encryption process. We will populate this variable by using a pre-defined symmetric key and certificate combination: -- encrypt plain text value DECLARE @CipherText VARBINARY(MAX); OPEN SYMMETRIC KEY SymKey     DECRYPTION BY CERTIFICATE SymCert     WITH PASSWORD='mypassword2010';     SET @CipherText = EncryptByKey                          (                            Key_GUID('SymKey'),                            @PlainText                           ); CLOSE ALL SYMMETRIC KEYS; The value of our newly generated cipher text is 0x006E12933CBFB0469F79ABCC79A583--. This will be important as we reference our cipher text later in this post. Our final step in preparing our scenario is to create a table variable to simulate the existence of a table that contains a column used to hold encrypted values. Once this table variable has been created, populate the table variable with the newly generated cipher text: -- capture value in table variable DECLARE @tbl TABLE (EncVal varbinary(MAX)); INSERT INTO @tbl (EncVal) VALUES (@CipherText); We are now ready to experience the challenge of capturing our encrypted column in an XML data type using the FOR XML clause: -- capture set in xml DECLARE @xml XML; SET @xml = (SELECT               EncVal             FROM @tbl AS MYTABLE             FOR XML AUTO, BINARY BASE64, ROOT('root')); If you add the SELECT @XML statement at the end of this portion of the code you will see the contents of the XML data in its raw format: <root>   <MYTABLE EncVal="AG4Skzy/sEafeavMeaWDBwEAAACE--" /> </root> Strangely, the value that is captured appears nothing like the value that was created through the encryption process. The result being that when this XML is converted into a readable data set the encrypted value will not be able to be decrypted, even with access to the symmetric key and certificate used to perform the decryption. An immediate thought might be to convert the varbinary data type to either a varchar or nvarchar before creating the XML data. This approach makes good sense. The code for this might look something like the following: -- capture set in xml DECLARE @xml XML; SET @xml = (SELECT              CONVERT(NVARCHAR(MAX),EncVal) AS EncVal             FROM @tbl AS MYTABLE             FOR XML AUTO, BINARY BASE64, ROOT('root')); However, this results in the following error: Msg 9420, Level 16, State 1, Line 26 XML parsing: line 1, character 37, illegal xml character A quick query that returns CONVERT(NVARCHAR(MAX),EncVal) reveals that the value that is causing the error looks like something off of a genuine Chinese menu. While this situation does present us with one of those spine-tingling, expletive-generating challenges, rest assured that this approach is on the right track. With the addition of the "style" argument to the CONVERT method, our solution is at hand. When dealing with converting varbinary data types we have three styles available to us: - The first is to not include the style parameter, or use the value of "0". As we see, this style will not work for us. - The second option is to use the value of "1" will keep our varbinary value including the "0x" prefix. In our case, the value will be 0x006E12933CBFB0469F79ABCC79A583-- - The third option is to use the value of "2" which will chop the "0x" prefix off of our varbinary value. In our case, the value will be 006E12933CBFB0469F79ABCC79A583-- Since we will want to convert this back to varbinary when reading this value from the XML data we will want the "0x" prefix, so we will want to change our code as follows: -- capture set in xml DECLARE @xml XML; SET @xml = (SELECT              CONVERT(NVARCHAR(MAX),EncVal,1) AS EncVal             FROM @tbl AS MYTABLE             FOR XML AUTO, BINARY BASE64, ROOT('root')); Once again, with the inclusion of the SELECT @XML statement at the end of this portion of the code you will see the contents of the XML data in its raw format: <root>   <MYTABLE EncVal="0x006E12933CBFB0469F79ABCC79A583--" /> </root> Nice! We are now cooking with gas. To continue our scenario, we will want to parse the XML data into a data set so that we can glean our freshly captured cipher text. Once we have our cipher text snagged we will capture it into a variable so that it can be used during decryption: -- read back xml DECLARE @hdoc INT; DECLARE @EncVal NVARCHAR(MAX); EXEC sp_xml_preparedocument @hDoc OUTPUT, @xml; SELECT @EncVal = EncVal FROM OPENXML (@hdoc, '/root/MYTABLE') WITH ([EncVal] VARBINARY(MAX) '@EncVal'); EXEC sp_xml_removedocument @hDoc; Finally, the decryption of our cipher text using the DECRYPTBYKEYAUTOCERT method and the certificate utilized to perform the encryption earlier in our exercise: SELECT     CONVERT(NVARCHAR(MAX),                     DecryptByKeyAutoCert                          (                            CERT_ID('AuditLogCert'),                            N'mypassword2010',                            @EncVal                           )                     ) EncVal; Ah yes, another hurdle presents itself! The decryption produced the value of NULL which in cryptography means that either you don't have permissions to decrypt the cipher text or something went wrong during the decryption process (ok, sometimes the value is actually NULL; but not in this case). As we see, the @EncVal variable is an nvarchar data type. The third parameter of the DECRYPTBYKEYAUTOCERT method requires a varbinary value. Therefore we will need to utilize our handy-dandy CONVERT method: SELECT     CONVERT(NVARCHAR(MAX),                     DecryptByKeyAutoCert                          (                             CERT_ID('AuditLogCert'),                             N'mypassword2010',                             CONVERT(VARBINARY(MAX),@EncVal)                           )                     ) EncVal; Oh, almost. The result remains NULL despite our conversion to the varbinary data type. This is due to the creation of an varbinary value that does not reflect the actual value of our @EncVal variable; but rather a varbinary conversion of the variable itself. In this case, something like 0x3000780030003000360045003--. Considering the "style" parameter got us past XML challenge, we will want to consider its power for this challenge as well. Knowing that the value of "1" will provide us with the actual value including the "0x", we will opt to utilize that value in this case: SELECT     CONVERT(NVARCHAR(MAX),                     DecryptByKeyAutoCert                          (                            CERT_ID('SymCert'),                            N'mypassword2010',                            CONVERT(VARBINARY(MAX),@EncVal,1)                           )                     ) EncVal; Bingo, we have success! We have discovered what happens with varbinary data when captured as XML data. We have figured out how to make this data useful post-XML-ification. Best of all we now have a choice in after-work parties now that our very happy client who depends on our XML based interface invites us for dinner in celebration. All thanks to the effective use of the style parameter.

    Read the article

  • CodePlex Daily Summary for Saturday, September 22, 2012

    CodePlex Daily Summary for Saturday, September 22, 2012Popular ReleasesWPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.8: Version: 2.5.0.8 (Milestone 8): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Mark the class DataModel as serializable. InfoMan: Minor improvements. InfoMan: Add unit tests for all modules. Othe...LogicCircuit: LogicCircuit 2.12.9.20: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionToolbars on text note dialog are more flexible now. You can select font face, size, color, and background of text you are typing. RAM now can be initialized to one of the following: random va...$linq - A Javascript LINQ library: Version 1.1: Version 1.1 Implemented batch, equiZip, zipLongest, prepend, pad, padWith, toJQuery, pipe, singleOrFallback, indexOf, indexOfElement, lastIndexOf, lastIndexOfElement, scan, prescan, and aggregate operators.Huo Chess: Huo Chess 0.95: The Huo Chess 0.95 version has an improved chessboard analysis function so as to be able to see which squares are the dangerous squares in the chessboard. This allows the computer to understand better when it is threatened. Two editions are included: Huo Chess 0.95 Console Application (57 KB in size) Huo Chess 0.95 Windows Application with GUI (119 KB in size) See http://harmoniaphilosophica.wordpress.com/2011/09/28/how-to-develop-a-chess-program-for-2jszrulazj6wq-23/ for the infamous How...Symphony Framework: Symphony Framework v2.0.0.2: Symphony Framework version 2.0.0.2. General note: If you install Symphony Framework 2.0.0.2 you must also install CodeGen 4.1.10 because a number of templates now utilise new features added to the tool. Added the user token PROJECTNAMESPACE to the “Symphony_Content.tpl” template to ensure that we can correctly reference the collection classes of the selection lists. Also added the ability to create object references to fields defined as having selection windows assigned. This enhancement ...Community xPress MDS: Initial MDS and DQS Models: Initial MDS & DQS ModelsSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.2020.421): New features: Disable a specific part of SiteMap to keep the data without displaying them in the CRM application. It simply comments XML part of the sitemap (thanks to rboyers for this feature request) Right click an item and click on "Disable" to disable it Items disabled are greyed and a suffix "- disabled" is added Right click an item and click on "Enable" to enable it Refresh list of web resources in the web resources pickerAJAX Control Toolkit: September 2012 Release: AJAX Control Toolkit Release Notes - September 2012 Release Version 60919September 2012 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ...Lib.Web.Mvc & Yet another developer blog: Lib.Web.Mvc 6.1.0: Lib.Web.Mvc is a library which contains some helper classes for ASP.NET MVC such as strongly typed jqGrid helper, XSL transformation HtmlHelper/ActionResult, FileResult with range request support, custom attributes and more. Release contains: Lib.Web.Mvc.dll with xml documentation file Standalone documentation in chm file and change log Library source code Sample application for strongly typed jqGrid helper is available here. Sample application for XSL transformation HtmlHelper/ActionRe...Sense/Net CMS - Enterprise Content Management: SenseNet 6.1.2 Community Edition: Sense/Net 6.1.2 Community EditionMain new featuresOur current release brings a lot of bugfixes, including the resolution of js/css editing cache issues, xlsx file handling from Office, expense claim demo workspace fixes and much more. Besides fixes 6.1.2 introduces workflow start options and other minor features like a reusable Reject client button for approval scenarios and resource editor enhancements. We have also fixed an issue with our install package to bring you a flawless installation...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Python Tools for Visual Studio: 1.5 RC: PTVS 1.5RC Available! We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RC. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. The primary new feature for the 1.5 release is Django including Azure support! The http://www.djangoproject.com is a pop...Launchbar: Lanchbar 4.0.0: This application requires .NET 4.5 which you can find here: www.microsoft.com/visualstudio/downloadsAssaultCube Reloaded: 2.5.4 -: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: New logo Improved airstrike! Reset nukes...Extended WPF Toolkit: Extended WPF Toolkit - 1.7.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's new in the 1.7.0 Release?New controls Zoombox Pie New features / bug fixes PropertyGrid.ShowTitle property added to allow showing/hiding the PropertyGrid title. Modifications to the PropertyGrid.EditorDefinitions collection will now automatically be applied to the PropertyGrid. Modifications to the PropertyGrid.PropertyDefinitions collection will now be reflected automaticaly...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2 For detailed release notes check the release notes. JayData core: all async operations now support promises JayDa...????????API for .Net SDK: SDK for .Net ??? Release 4: 2012?9?17??? ?????,???????????????。 ?????Release 3??????,???????,???,??? ??????????????????SDK,????????。 ??,??????? That's all.VidCoder: 1.4.0 Beta: First Beta release! Catches up to HandBrake nightlies with SVN 4937. Added PGS (Blu-ray) subtitle support. Additional framerates available: 30, 50, 59.94, 60 Additional sample rates available: 8, 11.025, 12 and 16 kHz Additional higher bitrates available for audio. Same as Source Constant Framerate available. Added Apple TV 3 preset. Added new Bob deinterlacing option. Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will keep running and continue pro...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.02.01: Stabilization release fixed this issues: Links not worked on FF, Chrome and Safari Modified packaging with own manifest file for install and source package. Moved the user Image on the Login to the left side. Moved h2 font-size to 24px. Note : This release Comes w/o source package about we still work an a solution. Who Needs the Visual Studio source files please go to source and download it from there. Known 16 CSS issues that related to the skin.css. All others are DNN default o...Visual Studio Icon Patcher: Version 1.5.1: This fixes a bug in the 1.5 release where it would crash when no language packs were installed for VS2010.New ProjectsCodePlexDeployment: Please ignore, this project is for testing out some features of the WAWS deployment integrationDotNetNuke Social Dashboard: The DotNetNuke Social Dashboard gives DotNetNuke Administrators and insight into the social statistics of their site.EESTEC LC Trieste: .Event Log Mailer: Mails events from Windows' system Event Log which matches rules in configuration. Runs as Windows service and has super simple configurationflx4432: Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam facilisis condimentum nulla. Duis sed quam vitae nunc semper facilisis a eget leo.lanWOLf: Send wake-on-lan packets across subnets by utilizing powered-on machines on each subnet.Micro-Apps Framework: Micro-Apps is a revolutionary piece of software that allows you to have multiple programs running from 1 file under the same process!NJ: NJ Language Learning Helper type Config() = // Just Code Example member x.GetAll() = seq{ yield {Name="Admin" Dictionary = OtfPG: To generate reproducible complex passwords from simple pass phrases, allowing the user to 'remember; a simple phrase, rather that a complex password, without evProject92104: as ppProject92105: ppaProject92107: papaPython intellisense Enhancer: For the python code, the intellisense box will show after you input a character, just like c#.QR Code Reader (By Screen Capture): Reads the QR Codes displayed in webpages. (You need to capture the code area) Displays the code information.scenariov1706jabbr: helloSharePoint 2013 REST Test Web Part: A simple web part (placed in a farm solution) that helps SharePoint developers to test every HTTP call to the new REST interface of SharePoint 2013.SharePoint Resources Updater (2010 /2013): Project for SharePoint 2010/2013 IT pro's and dev's to adress App_GlobalResources difficulties when developping SharePoint solutions(or maintaining large farms)Word CustomXML data services: Services to add,change and read metadata embedded into a Word document. Metadata are stored in a custom XML file into the Word document. ??????: ge ren xiang mu

    Read the article

  • Adjust timezone of an AVM Fritz!Box 7390

    It's been a while that I purchased an AVM Fritz!Box 7390 but since I'm using this 'PABX' here in Mauritius, I'm not really happy about the wrong time in the logs or handsets connected. Lately, I had some spare time to address this issue, and the following article describes how to adjust the timezone settings in general. The original idea came from an FAQ found in c't 21/11 (for a 7270 written in German language) but I added a couple of things based on other resources online. The following tutorial may be valid for other models, too. Use your common sense and think before you act. Brief introduction to AVM Fritz!Box devices The Fritz!Box series of AVM has been around for more than a decade and those little 'red boxes' have a high level of versatility for your small office or home. High-speed connections, secure WLAN and convenient telephony make a home network out of any network. Whether it's a computer, tablet or smartphone, any device can be connected to the FRITZ!Box. And best of all, installation is so simple that users will be online in a matter of minutes. If you want to have peace of your mind in your small network then a Fritz!Box is the easiest way to achieve that. I'm using my box primarly as WiFi access point, VoIP gateway and media server but only because it came in second after my Linux system. Limitations in the administrative Web UI Unfortunately, there are no possibilities to adjust the timezone settings in the Web UI at all - even not in Expert mode. I assume that this is part of the 'simplification' provided by AVM's design team. That's okay, as long as you reside in Central Europe, and the implicit time handling is correct for your location. Adjusting the timezone I got my device through an order at Amazon Germany already some time ago, and honestly I wasn't bothered too much about the pre-configured (fixed) timezone setting - CET or CEST depending on daylight saving. But you know, it's that kind of splinter at the back of your head that keeps nagging and bothering you indirectly. So, finally I sat down yesterday evening and did a quick research on how to change the timezone. Even though there are a number of results, I read the FAQ from the c't magazine first, as I consider this as a trusted and safe source of information. Of course, it is most important to avoid to 'brick' your device. You've been warned - No support Tinkering with the configuration of any AVM devices seems to be a violation of their official support channels. So, be warned and continue onlyin case that you're sure about what you are going to do. The following solutions are 'as-is' and they worked for my box flawlessly but may cause an issue in your case. Don't blame me... Solution 1 - Backup, modify and restore That's the way as described in the c't article and a couple of other forum postings I found online, mainly from Australia. Login the administrative Web UI and navigate to 'System => Einstellungen sichern' (System => Backup configuration) and store your current configuration to a local file on your machine. Despite some online postings it is not necessary to specify a password in order to secure or encrypt your backup. IMHO, this only adds another unnecessary layer of complexity to the process. Anyway, next you should create a another copy of your settings and keep it unmodified. That's our safety net to restore the current settings in case that we might have to issue a factory setting reset to the box. Now, open the configuration file with an advanced text editor which is capable to deal with Unix carriage returns properly - Windows Notepad doesn't do the job but Wordpad or Notepad++. Personally, I don't care and simply use geany, gedit or nano on Linux. In total there are 3 modifications that we have to apply to the configuration file - one new line and two adjustments. First, we have to add an instruction near the top of file that overrides the device internal checksum validation. Without this line, your settings won't be accepted. Caution: The drectives are case-sensitve and your outcome should read something like this: **** FRITZ!Box Fon WLAN 7390 CONFIGURATION EXPORTPassword=$$$$<ignore>FirmwareVersion=84.05.52CONFIG_INSTALL_TYPE=iks_16MB_xilinx_4eth_2ab_isdn_nt_te_pots_wlan_usb_host_dect_64415OEM=avmCountry=049Language=deNoChecks=yes**** CFGFILE:ar7.cfg/* * /var/flash/ar7.cfg * Mon Jul 29 10:49:18 2013 */ar7cfg {... Then search for the expression 'timezone' and you should find a section like this one (~ line 1113): timezone_manual {        enabled = no;        offset = 0;        dst_enabled = no;        TZ_string = "";        name = "";} We would like to manually handle the timezone setting in our device and therefore we have to enable it and set the proper value for Mauritius. The configuration block should like so afterwards: timezone_manual {        enabled = yes;        offset = 0;        dst_enabled = no;        TZ_string = "MUT-4";        name = "";} We specify the designation and the offset in hours of the timezone we would like to have. Caution: The offset indicates the value one has to add to the local time to arrive at UTC. More details are described in the Explanation of TZ strings. Mauritius has GMT+4 which means that we have to substract 4 hours from the local time to have UTC. Finally, we restore the modified configuration file via the administrative Web UI under 'System => Einstellungen sichern => Wiederherstellen' (System => Backup configuration => Restore). This triggers a reboot of the device, so please be patient and wait until the Web UI displays the login dialog again. Good luck! Solution 2 - Telnet A more elegant, read: technically interesting, way to adjust configuration settings in your Fritz!Box is to access it directly through Telnet. By default AVM disables that protocol channel and you have to enable it with a connected telephone. In order to activate the telnet service dial the following combination: #96*7* #96*8* (to disable telnet again after work has been completed) If you're using an AVM handset like the Fritz!Fon then you will receive a confirmation message on the display like so: telnetd ein Next, depending on your favourite operating system, you either launch a Command prompt in Windows or a terminal in Linux, get your Admin password ready, and you connect to your box like so: $ telnet fritz.box Trying 192.168.1.1...Connected to fritz.box.Escape character is '^]'.password: BusyBox v1.19.3 (2012-10-12 14:52:09 CEST) built-in shell (ash)Enter 'help' for a list of built-in commands.ermittle die aktuelle TTYtty is "/dev/pts/0"Console Ausgaben auf dieses Terminal umgelenkt# That's it, you are connected and we can continue to change the configuration manually. In order to adjust the timezone setting we have to open the ar7.cfg file. As we are now operating in a specialised environment, we only have limited capabilities at hand. One of those is a reduced version of vi - nvi. Let's open a second browser window with the fine manual page of nvi and start to edit our configuration file: # nvi /var/flash/ar7.cfg In our configuration file, we have to navigate to the timezone directives. The easiest way is to search for the expression 'timezone' by typing in the following: /timezone    (press Enter/Return) Now, we should see the exact lines of code like in the backed up version: timezone_manual {                                                                            enabled = no;                                                          offset = 0;                                                         dst_enabled = no;                                                   TZ_string = "";                                                     name = "";                                                        } And of course, we apply the same changes as described in the previous section: timezone_manual {                                                                            enabled = yes;                                                          offset = 0;                                                         dst_enabled = no;                                                   TZ_string = "MUT-4";                                                     name = "";                                                        } Finally, we have to write our changes back to the file and apply the new settings. :wq    (press Enter/Return) # ar7cfgchanged That's it! Finally, close the telnet session by pressing Ctrl+] and enter 'quit'. Additional ideas... There are a couple of more possibilities to enhance and to extend the usability of a Fritz!Box. There are lots of resources available on the net, but I'd like to name a few here. Especially for Linux users it is essential to be able to connect to any device remotely in a  safe and secure way. And the installation of a SSH server on the box would be a first step to improve this situation, also to avoid to run telnet after all. Sometimes, there might be problems in your VoIP connections, feel free to adjust the settings of codecs and connection handling, too. I guess, you'll get the idea... The only frontiers are in your mind.

    Read the article

  • How to simulate inner join on very large files in java (without running out of memory)

    - by Constantin
    I am trying to simulate SQL joins using java and very large text files (INNER, RIGHT OUTER and LEFT OUTER). The files have already been sorted using an external sort routine. The issue I have is I am trying to find the most efficient way to deal with the INNER join part of the algorithm. Right now I am using two Lists to store the lines that have the same key and iterate through the set of lines in the right file once for every line in the left file (provided the keys still match). In other words, the join key is not unique in each file so would need to account for the Cartesian product situations ... left_01, 1 left_02, 1 right_01, 1 right_02, 1 right_03, 1 left_01 joins to right_01 using key 1 left_01 joins to right_02 using key 1 left_01 joins to right_03 using key 1 left_02 joins to right_01 using key 1 left_02 joins to right_02 using key 1 left_02 joins to right_03 using key 1 My concern is one of memory. I will run out of memory if i use the approach below but still want the inner join part to work fairly quickly. What is the best approach to deal with the INNER join part keeping in mind that these files may potentially be huge public class Joiner { private void join(BufferedReader left, BufferedReader right, BufferedWriter output) throws Throwable { BufferedReader _left = left; BufferedReader _right = right; BufferedWriter _output = output; Record _leftRecord; Record _rightRecord; _leftRecord = read(_left); _rightRecord = read(_right); while( _leftRecord != null && _rightRecord != null ) { if( _leftRecord.getKey() < _rightRecord.getKey() ) { write(_output, _leftRecord, null); _leftRecord = read(_left); } else if( _leftRecord.getKey() > _rightRecord.getKey() ) { write(_output, null, _rightRecord); _rightRecord = read(_right); } else { List<Record> leftList = new ArrayList<Record>(); List<Record> rightList = new ArrayList<Record>(); _leftRecord = readRecords(leftList, _leftRecord, _left); _rightRecord = readRecords(rightList, _rightRecord, _right); for( Record equalKeyLeftRecord : leftList ){ for( Record equalKeyRightRecord : rightList ){ write(_output, equalKeyLeftRecord, equalKeyRightRecord); } } } } if( _leftRecord != null ) { write(_output, _leftRecord, null); _leftRecord = read(_left); while(_leftRecord != null) { write(_output, _leftRecord, null); _leftRecord = read(_left); } } else { if( _rightRecord != null ) { write(_output, null, _rightRecord); _rightRecord = read(_right); while(_rightRecord != null) { write(_output, null, _rightRecord); _rightRecord = read(_right); } } } _left.close(); _right.close(); _output.flush(); _output.close(); } private Record read(BufferedReader reader) throws Throwable { Record record = null; String data = reader.readLine(); if( data != null ) { record = new Record(data.split("\t")); } return record; } private Record readRecords(List<Record> list, Record record, BufferedReader reader) throws Throwable { int key = record.getKey(); list.add(record); record = read(reader); while( record != null && record.getKey() == key) { list.add(record); record = read(reader); } return record; } private void write(BufferedWriter writer, Record left, Record right) throws Throwable { String leftKey = (left == null ? "null" : Integer.toString(left.getKey())); String leftData = (left == null ? "null" : left.getData()); String rightKey = (right == null ? "null" : Integer.toString(right.getKey())); String rightData = (right == null ? "null" : right.getData()); writer.write("[" + leftKey + "][" + leftData + "][" + rightKey + "][" + rightData + "]\n"); } public static void main(String[] args) { try { BufferedReader leftReader = new BufferedReader(new FileReader("LEFT.DAT")); BufferedReader rightReader = new BufferedReader(new FileReader("RIGHT.DAT")); BufferedWriter output = new BufferedWriter(new FileWriter("OUTPUT.DAT")); Joiner joiner = new Joiner(); joiner.join(leftReader, rightReader, output); } catch (Throwable e) { e.printStackTrace(); } } } After applying the ideas from the proposed answer, I changed the loop to this private void join(RandomAccessFile left, RandomAccessFile right, BufferedWriter output) throws Throwable { long _pointer = 0; RandomAccessFile _left = left; RandomAccessFile _right = right; BufferedWriter _output = output; Record _leftRecord; Record _rightRecord; _leftRecord = read(_left); _rightRecord = read(_right); while( _leftRecord != null && _rightRecord != null ) { if( _leftRecord.getKey() < _rightRecord.getKey() ) { write(_output, _leftRecord, null); _leftRecord = read(_left); } else if( _leftRecord.getKey() > _rightRecord.getKey() ) { write(_output, null, _rightRecord); _pointer = _right.getFilePointer(); _rightRecord = read(_right); } else { long _tempPointer = 0; int key = _leftRecord.getKey(); while( _leftRecord != null && _leftRecord.getKey() == key ) { _right.seek(_pointer); _rightRecord = read(_right); while( _rightRecord != null && _rightRecord.getKey() == key ) { write(_output, _leftRecord, _rightRecord ); _tempPointer = _right.getFilePointer(); _rightRecord = read(_right); } _leftRecord = read(_left); } _pointer = _tempPointer; } } if( _leftRecord != null ) { write(_output, _leftRecord, null); _leftRecord = read(_left); while(_leftRecord != null) { write(_output, _leftRecord, null); _leftRecord = read(_left); } } else { if( _rightRecord != null ) { write(_output, null, _rightRecord); _rightRecord = read(_right); while(_rightRecord != null) { write(_output, null, _rightRecord); _rightRecord = read(_right); } } } _left.close(); _right.close(); _output.flush(); _output.close(); } UPDATE While this approach worked, it was terribly slow and so I have modified this to create files as buffers and this works very well. Here is the update ... private long getMaxBufferedLines(File file) throws Throwable { long freeBytes = Runtime.getRuntime().freeMemory() / 2; return (freeBytes / (file.length() / getLineCount(file))); } private void join(File left, File right, File output, JoinType joinType) throws Throwable { BufferedReader leftFile = new BufferedReader(new FileReader(left)); BufferedReader rightFile = new BufferedReader(new FileReader(right)); BufferedWriter outputFile = new BufferedWriter(new FileWriter(output)); long maxBufferedLines = getMaxBufferedLines(right); Record leftRecord; Record rightRecord; leftRecord = read(leftFile); rightRecord = read(rightFile); while( leftRecord != null && rightRecord != null ) { if( leftRecord.getKey().compareTo(rightRecord.getKey()) < 0) { if( joinType == JoinType.LeftOuterJoin || joinType == JoinType.LeftExclusiveJoin || joinType == JoinType.FullExclusiveJoin || joinType == JoinType.FullOuterJoin ) { write(outputFile, leftRecord, null); } leftRecord = read(leftFile); } else if( leftRecord.getKey().compareTo(rightRecord.getKey()) > 0 ) { if( joinType == JoinType.RightOuterJoin || joinType == JoinType.RightExclusiveJoin || joinType == JoinType.FullExclusiveJoin || joinType == JoinType.FullOuterJoin ) { write(outputFile, null, rightRecord); } rightRecord = read(rightFile); } else if( leftRecord.getKey().compareTo(rightRecord.getKey()) == 0 ) { String key = leftRecord.getKey(); List<File> rightRecordFileList = new ArrayList<File>(); List<Record> rightRecordList = new ArrayList<Record>(); rightRecordList.add(rightRecord); rightRecord = consume(key, rightFile, rightRecordList, rightRecordFileList, maxBufferedLines); while( leftRecord != null && leftRecord.getKey().compareTo(key) == 0 ) { processRightRecords(outputFile, leftRecord, rightRecordFileList, rightRecordList, joinType); leftRecord = read(leftFile); } // need a dispose for deleting files in list } else { throw new Exception("DATA IS NOT SORTED"); } } if( leftRecord != null ) { if( joinType == JoinType.LeftOuterJoin || joinType == JoinType.LeftExclusiveJoin || joinType == JoinType.FullExclusiveJoin || joinType == JoinType.FullOuterJoin ) { write(outputFile, leftRecord, null); } leftRecord = read(leftFile); while(leftRecord != null) { if( joinType == JoinType.LeftOuterJoin || joinType == JoinType.LeftExclusiveJoin || joinType == JoinType.FullExclusiveJoin || joinType == JoinType.FullOuterJoin ) { write(outputFile, leftRecord, null); } leftRecord = read(leftFile); } } else { if( rightRecord != null ) { if( joinType == JoinType.RightOuterJoin || joinType == JoinType.RightExclusiveJoin || joinType == JoinType.FullExclusiveJoin || joinType == JoinType.FullOuterJoin ) { write(outputFile, null, rightRecord); } rightRecord = read(rightFile); while(rightRecord != null) { if( joinType == JoinType.RightOuterJoin || joinType == JoinType.RightExclusiveJoin || joinType == JoinType.FullExclusiveJoin || joinType == JoinType.FullOuterJoin ) { write(outputFile, null, rightRecord); } rightRecord = read(rightFile); } } } leftFile.close(); rightFile.close(); outputFile.flush(); outputFile.close(); } public void processRightRecords(BufferedWriter outputFile, Record leftRecord, List<File> rightFiles, List<Record> rightRecords, JoinType joinType) throws Throwable { for(File rightFile : rightFiles) { BufferedReader rightReader = new BufferedReader(new FileReader(rightFile)); Record rightRecord = read(rightReader); while(rightRecord != null){ if( joinType == JoinType.LeftOuterJoin || joinType == JoinType.RightOuterJoin || joinType == JoinType.FullOuterJoin || joinType == JoinType.InnerJoin ) { write(outputFile, leftRecord, rightRecord); } rightRecord = read(rightReader); } rightReader.close(); } for(Record rightRecord : rightRecords) { if( joinType == JoinType.LeftOuterJoin || joinType == JoinType.RightOuterJoin || joinType == JoinType.FullOuterJoin || joinType == JoinType.InnerJoin ) { write(outputFile, leftRecord, rightRecord); } } } /** * consume all records having key (either to a single list or multiple files) each file will * store a buffer full of data. The right record returned represents the outside flow (key is * already positioned to next one or null) so we can't use this record in below while loop or * within this block in general when comparing current key. The trick is to keep consuming * from a List. When it becomes empty, re-fill it from the next file until all files have * been consumed (and the last node in the list is read). The next outside iteration will be * ready to be processed (either it will be null or it points to the next biggest key * @throws Throwable * */ private Record consume(String key, BufferedReader reader, List<Record> records, List<File> files, long bufferMaxRecordLines ) throws Throwable { boolean processComplete = false; Record record = records.get(records.size() - 1); while(!processComplete){ long recordCount = records.size(); if( record.getKey().compareTo(key) == 0 ){ record = read(reader); while( record != null && record.getKey().compareTo(key) == 0 && recordCount < bufferMaxRecordLines ) { records.add(record); recordCount++; record = read(reader); } } processComplete = true; // if record is null, we are done if( record != null ) { // if the key has changed, we are done if( record.getKey().compareTo(key) == 0 ) { // Same key means we have exhausted the buffer. // Dump entire buffer into a file. The list of file // pointers will keep track of the files ... processComplete = false; dumpBufferToFile(records, files); records.clear(); records.add(record); } } } return record; } /** * Dump all records in List of Record objects to a file. Then, add that * file to List of File objects * * NEED TO PLACE A LIMIT ON NUMBER OF FILE POINTERS (check size of file list) * * @param records * @param files * @throws Throwable */ private void dumpBufferToFile(List<Record> records, List<File> files) throws Throwable { String prefix = "joiner_" + files.size() + 1; String suffix = ".dat"; File file = File.createTempFile(prefix, suffix, new File("cache")); BufferedWriter writer = new BufferedWriter(new FileWriter(file)); for( Record record : records ) { writer.write( record.dump() ); } files.add(file); writer.flush(); writer.close(); }

    Read the article

  • CodePlex Daily Summary for Saturday, January 22, 2011

    CodePlex Daily Summary for Saturday, January 22, 2011Popular ReleasesMinecraft Tools: Minecraft Topographical Survey 1.3: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds automatic block list updates, so MTS will recognize blocks added in game updates properly rather than drawing them in bright pink. New in this version of MTS: Support for all new blocks added since the Halloween update Auto-update of blockcolors.xml to support future game updates A splash screen that shows while the program searches for upd...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14996.000: New Features: ============= This release is just compiled against the latest release of JetBrains ReSharper 5.1.1766.4 Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes...TweetSharp: TweetSharp v2.0.0.0 - Preview 9: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for lists and suggested users Fixes based on user feedback Third Party Library VersionsHammock v1.1.6: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comjqGrid ASP.Net MVC Control: Version 1.2.0.0: jqGrid 3.8 support jquery 1.4 support New and exciting features Many bugfixes Complete separation from the jquery, & jqgrid codeMediaScout: MediaScout 3.0 Preview 4: Update ReleaseCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1: Coding4Fun.Phone.Toolkit v1MFCMAPI: January 2011 Release: Build: 6.0.0.1024 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeAutoLoL: AutoLoL v1.5.4: Added champion: Renekton Removed automatic file association Fix: The recent files combobox didn't always open a file when an item was selected Fix: Removing a recently opened file caused an errorDotNetNuke® Community Edition: 05.06.01: Major Highlights Fixed issue to remove preCondition checks when upgrading to .Net 4.0 Fixed issue where some valid domains were failing email validation checks. Fixed issue where editing Host menu page settings assigns the page to a Portal. Fixed issue which caused XHTML validation problems in 5.6.0 Fixed issue where an aspx page in any subfolder was inaccessible. Fixed issue where Config.Touch method signature had an unintentional breaking change in 5.6.0 Fixed issue which caused...MiniTwitter: 1.65: MiniTwitter 1.65 ???? ?? List ????? in-reply-to ???????? ????????????????????????? ?? OAuth ????????????????????????????ASP.net Ribbon: Version 2.1: Tadaaa... So Version 2.1 brings a lot of things... Have a look at the homepage to see what's new. Also, I wanted to (really) improve the Designer. I wanted to add great things... but... it took to much time. And as some of you were waiting for fixes, I decided just to fix bugs and add some features. So have a look at the demo app to see new features. Thanks ! (You can expect some realeses if bugs are not fixed correctly... 2.2, 2.3, 2.4....)iTracker Asp.Net Starter Kit: Version 3.0.0: This is the inital release of the version 3.0.0 Visual Studio 2010 (.Net 4.0) remake of the ITracker application. I connsider this a working, stable application but since there are still some features missing to make it "complete" I'm leaving it listed as a "beta" release. I am hoping to make it feature complete for v3.1.0 but anything is possible.ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager changes: RenderView controller extension works for razor also live demo switched to razorBloodSim: BloodSim - 1.3.3.1: - Priority update to resolve a bug that was causing Boss damage to ignore Blood Shields entirelyRawr: Rawr 4.0.16 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of this release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. W...MvcContrib: an Outer Curve Foundation project: MVC 3 - 3.0.51.0: Please see the Change Log for a complete list of changes. MVC BootCamp Description of the releases: MvcContrib.Release.zip MvcContrib.dll MvcContrib.TestHelper.dll MvcContrib.Extras.Release.zip T4MVC. The extra view engines / controller factories and other functionality which is in the project. This file includes the main MvcContrib assembly. Samples are included in the release. You do not need MvcContrib if you download the Extras.Yahoo! UI Library: YUI Compressor for .Net: Version 1.5.0.0 - Jalthi: Updated solution to VS2010. New: Work Item #4450 - Optional MSBuild task parameter :: Do not error if no files were found. Fixed: Work Item #5028 - Output file encoding is the same as the optional MSBuild task encoding argument. Fixed: Work Item #5824 - MSBuilds where slow, after the first build due to the Current Thread being forced to en-gb, on none en-gb systems. Changed: Work Item #6873 - Project license changed from MS-PL to GPLv2. New: Added all the unit tests from the Java YU...N2 CMS: 2.1.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. 2.1.1 Maintenance release List of changes 2.1 Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open...DNN Menu Provider: 01.00.00 (DNN 5.X and newer): DNN Menu Provider v1.0.0Our first release build is a stable release. It requires at least DotNetNuke 5.1.0. Previous DNN versions are not suported. Major Highlights: Easy to use template system build on a selfmade and powerful engine. Ready for multilingual websites. A flexible translation integration based on the ASP.NET Provider Model as well as an build in provider for DNN Localization (DNN 5.5.X > required) and an provider for EALO Translation API. Advanced in-memory caching function...VidCoder: 0.8.1: Adds ability to choose an arbitrary range (in seconds or frames) to encode. Adds ability to override the title number in the output file name when enqueing multiple titles. Updated presets: Added iPhone 4, Apple TV 2, fixed some existing presets that should have had weightp=0 or trellis=0 on them. Added {parent} option to auto-name format. Use {parent:2} to refer to a folder 2 levels above the input file. Added {title:2} option to auto-name format. Adds leading zeroes to reach the sp...New Projectsagap: Système de gestion d'application.Blog in Silverlight With BlogEngine: I love silverlight and want to build my blog in silverlight base on BlogEngine.NETCavemanTools: Easy to use toolkit with extension methods and special goodies for faster development, written in C# on .Net 3.5. CloudCompanion: Windows Azure performance measurement & analytics tools.Delivery Madness: XNA Game Development ExampledFactor: Visual Studio Add-in. Provides extended refactoring options.GpSpotMe: El objetivo final de GPSmapPoint es mostrar la posición del usuario sobre un mapa topográfico, pero eso no es mas que una escusa para aprender y divertirse programando. Esta desarrollado en C# sobre .NET Compact Framework 3.5 y puede ser usado en teléfonos con Windows Mobile 6.xInvestment Calculator: Allows you to evaluate how much money you could have today if you invested to one of the predefined investment opportunities in the database at a given date.jbucknor: jbucknorLoad Generation: Generates load according to a given pattern over a long period of time for the given number of users. It can vary the load in different patters such as linear, exponential etc. Load can be generated on custom or standard protocol Orchard Profile Module: Provides user profilesOrchard Super Classic Theme: This Orchard Theme is used to demonstrate the dynamic themes capabilities offered by Orchard. Based on the Classic Theme for Orchard, you can chose among different variations from the Dashboard.Orchard Youtube Field Module: Youtube field for orchard.Osac DataLayer: Database layer to simplify the use of database connection, sql queries and commands. Powerd by OSAC. http://www.osac.nlPascal Design: Pascal Design. pascal design is for users writing pascal application or to students learning pascal and don't need to workout the design and want to make same fast "screens". it's developed in C#PathEditor: This tool simplified the access to the environment path variable. No long line, a nice grid for editing easy and secure with directory checking. PLG Graphic File Analyzer: PLG Analyzer is an application that loads a graphic scene described in PLG format, parses the file and displays the information in it on the screen in 3D coordinates using OpenTK for C#. This project is a university project (homework, not final project) so please bear in mind :)Read Application Cofiguration in Javascript: Would it be good , if "AppSettings" is accessed with "Javascript.Configuration.ConfigurationManager.AppSettings["ServiceUrl"]"?Route#: A Microsoft .NET 4.0 C#/F# application to load routes and find minimal paths. The application is meant to let user create a network of nodes and connections representing a web to route. Starting from a point A the application will find the minimal path to B.Send SMS: Send SMS allows you to send SMS (Short Messaging Service) to all mobile operators across India. It allows you to send SMS through popular service providers like Way2SMS, Full On Sms, Tezsms, Sms Inside and more.SocialMe: This is a simple Facebook, MySpace & Twitter client, but small!StockViewer: This is an interactive way to browse stocks.Thailand IC2011 Training: Using for IC2011 training at KU. Topic. Windows Presentation Foundation Silverlight Windows Phone 7 TipTip: Online oblozuvanjeWeb Content Compressor: The objective of this project is to compress any Javascript (js file or inline script at some web files) and Cascading Style Sheets to an efficient level that works exactly as the original source, before it was minified. The library also is integrated with MSBuildwuyuhu: wuyuhuXaml Mvp: With Xaml Mvp you can create Windows Phone 7 applications based on the MVP pattern. By seperating Data from Behaviour you still get the benefit of MVVM without your View Model becoming a fat-controller. Silverlight and WPF coming soon! Developed using C#XnaWavPack: Native C# wavpack decoder, intended for use with the dynamic sound API in XNA4.

    Read the article

  • CodePlex Daily Summary for Saturday, June 23, 2012

    CodePlex Daily Summary for Saturday, June 23, 2012Popular ReleasesWPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.5: Version: 2.5.0.5 (Milestone 5): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Add IsInDesignMode property to the WafConfiguration class. WAF: Introduce the IModuleController interface. WAF: Add ...Windows 8 Metro RSS Reader: Metro RSS Reader.v7: Updated for Windows 8 Release Preview Changed background and foreground colors Used VariableSizeGrid layout to wrap blog posts with images Sort items with Images first, text-only last Enabled Caching to improve navigation between frames This is the release package of the source code The package includes x64, x86 releases. Installation Instructions http://dl.dropbox.com/u/23484650/RssReaderMetro/Screenshots/AppPackage.JPG Select x64 or x86 folder from the package http://dl.dropbox.com...Confuser: Confuser 1.9: Change log: * Stable output (i.e. given the same seed & input assemblies, you'll get the same output assemblies) + Generate debug symbols, now it is possible to debug the output under a debugger! (Of course without enabling anti debug) + Generating obfuscation database, most of the obfuscation data in stored in it. + Two tools utilizing the obfuscation database (Database viewer & Stack trace decoder) * Change the protection scheme -----Please read Bug Report before you report a bug-----XDA ROM HUB: XDA ROM HUB v0.8.2: From now on, the downloads will be in 7z format, much less to download. Organized folders, some users didn't find the program at all. Added installer. Auto scroll in log view.XDesigner.Development: First release: First releaseBlackJumboDog: Ver5.6.5: 2012.06.22 Ver5.6.5  (1) FTP??????? EPSV ?? EPRT ???????DotNetNuke® Form and List: 06.00.01: DotNetNuke Form and List 06.00.01 Changes in 06.00.01 Icons are shown in module action buttons (workaraound to core issue with IconAPI) Fix to Token2XSL Editor, changing List type raised exception MakeTumbnail and ShowXml handlers had been missing in install package Updated help texts for better understanding of filter statement, token support in email subject and css style Major changes for fnL 6.0: DNN 6 Form Patterns including modal PopUps and Tabs http://www.dotnetnuke.com/Po...MVVM Light Toolkit: V4RTM (binaries only) including Windows 8 RP: This package contains all the latest DLLs for MVVM Light V4 RTM. It includes the DLLs for Windows 8 Release Preview. An updated Nuget package is also available at http://nuget.org/packages/MvvmLightLibs An installer with binaries, snippets and templates will follow ASAP.Weapsy - ASP.NET MVC CMS: 1.0.0: - Some changes to Layout and CSS - Changed version number to 1.0.0.0 - Solved Cache and Session items handler error in IIS 7 - Created the Modules, Plugins and Widgets Areas - Replaced CKEditor with TinyMCE - Created the System Info page - Minor changesAcDown????? - AcDown Downloader Framework: AcDown????? v3.11.7: ?? ●AcDown??????????、??、??????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ??:????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? ??????????????,??????????: ??"AcDown?????"????????? ...NShader - HLSL - GLSL - CG - Shader Syntax Highlighter AddIn for Visual Studio: NShader 1.3 - VS2010 + VS2012: This is a small maintenance release to support new VS2012 as well as VS2010. This release is also fixing the issue The "Comment Selection" include the first line after the selection If the new NShader version doesn't highlight your shader, you can try to: Remove the registry entry: HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\11.0\FontAndColors\Cache Remove all lines using "fx" or "hlsl" in file C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\CommonExtensions\Micr...Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.8.0: System Requirements OS Windows 7 Windows Vista Windows Server 2008 Windows Server 2008 R2 Web Server Internet Information Service 7.0 or above .NET Framework .NET Framework 4.0 WCF Activation feature HTTP Activation Non-HTTP Activation for net.pipe/net.tcp WCF bindings ASP.NET MVC ASP.NET MVC 3.0 Database Microsoft SQL Server 2005 Microsoft SQL Server 2008 Microsoft SQL Server 2008 R2 Additional Deployment Configuration Started Windows Process Activation service Start...CrashReporter.NET : Exception reporting library for C# and VB.NET: CrashReporter.NET 1.1: Added screenshot support that takes screenshot of user's desktop on application crash and provides option to include screenshot with crash report. Added Windows version in crash reports. Added email field and exception type field in crash report dialog. Added exception type in crash reports. Added screenshot tab that shows crash screenshot.CTI Text Encryption: CTI Text Encryption 3.0: Fix a bug - The application will occasionally freeze during encryption or decryption process.MFCMAPI: June 2012 Release: Build: 15.0.0.1034 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeMonoGame - Write Once, Play Everywhere: MonoGame 2.5.1: Release Notes The MonoGame team are pleased to announce that MonoGame v2.5.1 has been released. This release contains important bug fixes and minor updates. Recent additions include project templates for iOS and MacOS. The MonoDevelop.MonoGame AddIn also works on Linux. We have removed the dependency on the thirdparty GamePad library to allow MonoGame to be included in the debian/ubuntu repositories. There have been a major bug fix to ensure textures are disposed of correctly as well as some ...Sense/Net CMS - Enterprise Content Management: SenseNet 6.1 Community Edition: Sense/Net 6.1 Community EditionMain new features:major performance optimizations Office 2010 and Basic authentication support new main page and enhanced demo experience The new 6.1 release is a true milestone in the history of Sense/Net ECMS. In the past few months we mostly concentrated on performance optimizations and implemented low-level features for improved scalability and robustness. We have tested the system in high availability setup under high load by conducting a benchmark duri...????: ????2.0.2: 1、???????????。 2、DJ???????10?,?????????10?。 3、??.NET 4.5(Windows 8)????????????。 4、???????????。 5、??????????????。 6、???Windows 8????。 7、?????2.0.1???????????????。 8、??DJ?????????。Azure Storage Explorer: Azure Storage Explorer 5 Preview 1 (6.17.2012): Azure Storage Explorer verison 5 is in development, and Preview 1 provides an early look at the new user interface and some of the new features. Here's what's new in v5 Preview 1: New UI, similar to the new Windows Azure HTML5 portal Support for configuring and viewing storage account logging Support for configuring and viewing storage account monitoring Uses the Windows Azure 1.7 SDK libraries Bug fixes????????API for .Net SDK: SDK for .Net ??? Release 2: 6?20????? ?? - FrindesInActive???????json?????????,???????????。??。 6?19????? ?? - ???????????????,???????0?????????。 ?? - ???Entity?????Suggestion??????????????JSON????????。 ?? - ???OAuth?Request??????AccessToken???SourceKey????QueryString?????????。 6?17????? ??? - .net 4.0 SDK??Dynamic??????????????????API?? ??? - ?Utility?????????API??????DateTime???ParseUTCDate ?? - ?????????????Json.net???,???SDK????Json.net?????。 ?? - ???Client??????API???GetCommand?PostCommand,??????????????...New ProjectsAuditMVC: This project is for Shanghai Educational Committee.Autopoco Contrib: this a contribute to autopoco projectBit Food: summary to be createdC-Breeze: This project aims to create a compiler capable of compiling the full grammar set of C.ContosoCookbook Lab in Windows 8 camp: For everyoneDemo_ASP.NET: ssdfsdfsdfsdfsdfsdfsdFluTe: FluTe is an advanced alternative to the string.Format method, written using F# and C#. It allows you to define Template objects using a fluent interface.IFV Releases: hey.. Welcome To IFV Code Files.. here We Upload old Source codes For IDM Patch...Innovacall MVC Framework and Starter Kits: Empty MVC 3.2 project with common Framework and multiple layers. The project is open but not ready. LetUsTalk: To Establish Connection With Different Web AppMEF Container and Azure: Example of loading files from Azure Storage into DirectoryCatalog for consumption via MEF.Nana C++ Library: Nana C++ Library takes aim at easy-to-use and portable library, it provides a GUI framework and threads for easy programming with modern C++ methods.NBU Library: MVC3 application providing university library services to users, students and professors, and interface for the librarians to process the requests.Platform OS: Platform OS is a new operating system being developed by LeveL X. (LeveLX.org)SampleTFSProfject: My first Project using TFSSilverlight DateSelector: DateSelector Custom Control. Silverlight custom control where dates can be selected. It's easy to use and user friendly. SPMegaMenu: Purpose: Create an implementation of a JQuery Mega Menu Derive menu content from SharePoint lists NOT rely on installed feature. (Created entirely client-sideSuCasa Application: This is the Su Casa education and iministry application. This is for grades and outreach.Task Card Creator 2012: Small tool for printing task cards used for a Scrum board. Your Scrum board will be looking impressive. For Team Foundation Server 2012.Test_Project: Lucky0504 Test_ProjectThe Fugitive: The FugitiveTopcoder problems: Nothing to write down here at now.tweetc - A windows command line twitter client: Review/Send tweets all from the comfort of the command line.Windows Phone 7 Contact Synchroniztion: Its a Web Application App for Windows Phone 7 to provide contact sharing mechanism over any network.WMemoryProfiler: WMemoryProfiler is a managed memory profiling API to aid integration testing of managed components. It does support .Net 2.0 up to 4.5 (x86,x64).WordSync: WordSync is a simplistic, user-friendly document editor that will keep your documents in sync using Google Drive or Dropbox and still edit them offline.Xydan fantasy game project: This project is meant to be a garage project creating a unique game.YSTrade: YS Trade System??????: dbFM??Windows????????????????。??????、?????????,??????????。????????:http://www.win7soft.com/justplus/dbfm ????bug???: ??:justplus@ahu.edu.cn justplus@163.com

    Read the article

  • CodePlex Daily Summary for Sunday, January 30, 2011

    CodePlex Daily Summary for Sunday, January 30, 2011Popular ReleasesWPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.3: Version: 2.0.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...Rawr: Rawr 4.0.17 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 and on the Version Notes page: http://rawr.codeplex.com/wikipage?title=VersionNotes As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you...VivoSocial: VivoSocial 7.4.2: Version 7.4.2 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 7.4.2 release and see if they persist. If you have any questions about this release, please post them in our Support forums. If you are experiencing a bug or would like to request a new feature, please submit it to our issue tracker. Web Controls * Updated Business Objects and added a new SQL Data Provider File. Groups * Fixed a security issue whe...PHP Manager for IIS: PHP Manager 1.1.1 for IIS 7: This is a minor release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus several bug fixes (see change list for more details). Also, this release includes Russian language support. SHA1 codes for the downloads are: PHPManagerForIIS-1.1.0-x86.msi - 6570B4A8AC8B5B776171C2BA0572C190F0900DE2 PHPManagerForIIS-1.1.0-x64.msi - 12EDE004EFEE57282EF11A8BAD1DC1ADFD66A654VFPX: VFP2C32 2.0.0.8 Release Candidate: This release includes several bugfixes, new functions and finally a CHM help file for the complete library.EnhSim: EnhSim 2.3.3 ALPHA: 2.3.3 ALPHAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added back in a p...DB>doc for Microsoft SQL Server: 1.0.0.0: Initial release Supported output HTML WikiPlex markup Raw XML Supported objects Tables Primary Keys Foreign Keys ViewsmojoPortal: 2.3.6.1: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2361-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Office Web.UI: Alpha preview: This is the first alpha release. Very exciting moment... This download is just the demo application : "Contoso backoffice Web App". No source included for the moment, just the app, for testing purposes and for feedbacks !! This package includes a set of official MS Office icons (143 png 16x16 and 132 png 32x32) to really make a great app ! Please rate and give feedback ThanksParallel Programming with Microsoft Visual C++: Drop 6 - Chapters 4 and 5: This is Drop 6. It includes: Drafts of the Preface, Introduction, Chapters 2-7, Appendix B & C and the glossary Sample code for chapters 2-7 and Appendix A & B. The new material we'd like feedback on is: Chapter 4 - Parallel Aggregation Chapter 5 - Futures The source code requires Visual Studio 2010 in order to run. There is a known bug in the A-Dash sample when the user attempts to cancel a parallel calculation. We are working to fix this.Catel - WPF and Silverlight MVVM library: 1.1: (+) Styles can now be changed dynamically, see Examples application for a how-to (+) ViewModelBase class now have a constructor that allows services injection (+) ViewModelBase services can now be configured by IoC (via Microsoft.Unity) (+) All ViewModelBase services now have a unit test implementation (+) Added IProcessService to run processes from a viewmodel with directly using the process class (which makes it easier to unit test view models) (*) If the HasErrors property of DataObjec...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.160: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release improves NodeXL's Twitter and Pajek features. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file in Windows Explorer and select "Extract All." Close Ex...Kooboo CMS: Kooboo CMS 3.0 CTP: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL, RavenDB and SQLCE. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder to enable...UOB & ME: UOB ME 2.6: UOB ME 2.6????: ???? V1.0: ???? V1.0 ??Password Generator: 2.2: Parallel password generation Password strength calculation ( Same method used by Microsoft here : https://www.microsoft.com/protect/fraud/passwords/checker.aspx ) Minor code refactoringVisual Studio 2010 Architecture Tooling Guidance: Spanish - Architecture Guidance: Francisco Fagas http://geeks.ms/blogs/ffagas, Microsoft Most Valuable Professional (MVP), localized the Visual Studio 2010 Quick Reference Guidance for the Spanish communities, based on http://vsarchitectureguide.codeplex.com/releases/view/47828. Release Notes The guidance is available in a xps-only (default) or complete package. The complete package contains the files in xps, pdf and Office 2007 formats. 2011-01-24 Publish version 1.0 of the Spanish localized bits.ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.2: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager the html generation has been optimized, the html page size is much smaller nowFacebook Graph Toolkit: Facebook Graph Toolkit 0.6: new Facebook Graph objects: Application, Page, Post, Comment Improved Intellisense documentation new Graph Api connections: albums, photos, posts, feed, home, friends JSON Toolkit upgraded to version 0.9 (beta release) with bug fixes and new features bug fixed: error when handling empty JSON arrays bug fixed: error when handling JSON array with square or large brackets in the message bug fixed: error when handling JSON obejcts with double quotation in the message bug fixed: erro...Microsoft All-In-One Code Framework: Visual Studio 2008 Code Samples 2011-01-23: Code samples for Visual Studio 2008New ProjectsAnaida - WebSocket Client/Adapter: Anaida is a WebSocket Client Library/Adapter. With 3 versions for Java, Silverlight and C#CutPasteAssign: Visual Studio extension to assist in the common refactoring of assigning parameters to local variables.Drori Photos: Photos of Drori the photographerD-Solution: App de D-SolutionEnigma Home Inventory: Most consumers do not have an itemized list of proof of ownership. Enigma Home Inventory may take the hassle out of arguing with the insurance companies. This project is aimed to be for a simple inventory program for end users who are not computer savvy.FastKnow: is a CMS & wikiFileSignatures: FileSignatures aims to create a class library that can identify the file format based on file contents. The project is written in C# 3.0, and can be used in .NET 3.5 and 4.0 projects.Genrsis: The aim of the Genrsis project is to be a suite of products that you can use to build things, starting with a workflow-based project management tool. Built in C#, it should be a one-stop place to get well-integrated products to get you up and running.MVC Demos: MVC 2 and MVC 3 examples with ajax and json.MVC Templates for DevExpress: Scaffolding templates for use in ASP.NET MVC 2 with DevExpress MVC Extensions for ASP.NET MVCPixel Replacer: The Pixel Replacer is a simple library for replacing pixel colors with a new color, by setting a filter rule.ReviewPal - The Code Review Companion for .Net.: ReviewPal, the Code Review Companion for .Net. This is an Add-In / Extension for Visual Studio 2008 & Visual Studio 2010. The aim of the Add-In / Extension is to do a source code review within the Visual Studio IDE where code makes more sense and most readable.SMVector3: Vector3 class implemented as float array or with SIMD instructions with the same interface so it is transparant whether you decide to use one version or another. You can also chance version during the life cycle of the projects.uRibbon - Office 2007 Ribbon control for VB.NET: Office 2007 ribbon control, with Orb and graphic transitions. After searching for many day looking for an Office 2007-like ribbon bar, I finally gave up and decided to write my own. It's in decent shape as-is. But anyone interested in helping me to continue the devlopment??vtcheck: This will read a target binary and check to see if it is detected by VirusTotal.Web Scheduled Task Framework: A simple set of classes intended to allow the standalone scheduling of tasks (arbitrary code to execute) on a .net website without requiring access to the operating system.WP7 codeproject app: A Windows Phone 7 app for browsing codeproject.com.zhongjh: ?????????,???????。???????????: ???????????

    Read the article

  • CodePlex Daily Summary for Sunday, May 20, 2012

    CodePlex Daily Summary for Sunday, May 20, 2012Popular ReleasesExtAspNet: ExtAspNet v3.1.6: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://bbs.extasp.net/ ??:http://demo.extasp.net/ ??:http://doc.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-05-20 v3.1.6 -??RowD...totalem: version 2012.05.20.1: Beta version added function to create new empty file added function to create new file from clipboard content (save content of clipboard to file) added feature to direct view file from FTP server added feature to direct edit file from FTP server added feature to direct encrypt and copy files to FTP server added feature to direct copy and decrypt files from FTP servergGrid - Editable jQuery Grid: Initial Version release: The js file is the initial version of gGrid. Below are some of the limitations of the gGrid plugin The grid requires to return a MVC partial view to render the updated grid on screen.WatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.14.05: Whats New Added New Editor Skin "BootstrapCK-Skin" Added New Editor Skin "Slick" Added Dnn Pages Drop Down to the Link Dialog (to quickly link to a portal tab) changes Fixed Issue #6956 Localization issue with some languages Fixed Issue #6930 Folder Tree view was not working in some cases Changed the user folder from User name to User id User Folder is now used when using Upload Function and User Folder is enabled File-Browser Fixed Resizer Preview Image Optimized the oEmbed Pl...PHPExcel: PHPExcel 1.7.7: See Change Log for details of the new features and bugfixes included in this release. BREAKING CHANGE! From PHPExcel 1.7.8 onwards, the 3rd-party tcPDF library will no longer be bundled with PHPExcel for rendering PDF files through the PDF Writer. The PDF Writer is being rewritten to allow a choice of 3rd party PDF libraries (tcPDF, mPDF, and domPDF initially), none of which will be bundled with PHPExcel, but which can be downloaded seperately from the appropriate sites.GhostBuster: GhostBuster Setup (91520): Added WMI based RestorePoint support Removed test code from program.cs Improved counting. Changed color of ghosted but unfiltered devices. Changed HwEntries into an ObservableCollection. Added Properties Form. Added Properties MenuItem to Context Menu. Added Hide Unfiltered Devices to Context Menu. If you like this tool, leave me a note, rate this project or write a review or Donate to Ghostbuster. Donate to GhostbusterC#??????EXCEL??、??、????????:DataPie(??MSSQL 2008、ORACLE、ACCESS 2007): DataPie_V3.2: V3.2, 2012?5?19? ????ORACLE??????。AvalonDock: AvalonDock 2.0.0795: Welcome to the Beta release of AvalonDock 2.0 After 4 months of hard work I'm ready to upload the beta version of AvalonDock 2.0. This new version boosts a lot of new features and now is stable enough to be deployed in production scenarios. For this reason I encourage everyone is using AD 1.3 or earlier to upgrade soon to this new version. The final version is scheduled for the end of June. What is included in Beta: 1) Stability! thanks to all users contribution I’ve corrected a lot of issues...myCollections: Version 2.1.0.0: New in this version : Improved UI New Metro Skin Improved Performance Added Proxy Settings New Music and Books Artist detail Lot of Bug FixingAspxCommerce: AspxCommerce1.1: AspxCommerce - 'Flexible and easy eCommerce platform' offers a complete e-Commerce solution that allows you to build and run your fully functional online store in minutes. You can create your storefront; manage the products through categories and subcategories, accept payments through credit cards and ship the ordered products to the customers. We have everything set up for you, so that you can only focus on building your own online store. Note: To login as a superuser, the username and pass...SiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.1616.403): BUG FIX Hide save button when Titles or Descriptions element is selectedMapWindow 6 Desktop GIS: MapWindow 6.1.2: Looking for a .Net GIS Map Application?MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial template. The extensions you create from the template can be loaded in MapWindow.DotSpatial: DotSpatial 1.2: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...Mugen Injection: Mugen Injection 2.2.1 (WinRT supported): Added ManagedScopeLifecycle. Increase performance. Added support for resolve 'params'.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.52: Make preprocessor comment-statements nestable; add the ///#IFNDEF statement. (Discussion #355785) Don't throw an error for old-school JScript event handlers, and don't rename them if they aren't global functions.DotNetNuke® Events: 06.00.00: This is a serious release of Events. DNN 6 form pattern - We have take the full route towards DNN6: most notably the incorporation of the DNN6 form pattern with streamlined UX/UI. We have also tried to change all formatting to a div based structure. A daunting task, since the Events module contains a lot of forms. Roger has done a splendid job by going through all the forms in great detail, replacing all table style layouts into the new DNN6 div class="dnnForm XXX" type of layout with chang...LogicCircuit: LogicCircuit 2.12.5.15: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionThis release is fixing one but nasty bug. Two functions XOR and XNOR when used with 3 or more inputs were incorrectly evaluating their results. If you have a circuit that is using these functions...LINQ to Twitter: LINQ to Twitter Beta v2.0.25: Supports .NET 3.5, .NET 4.0, Silverlight 4.0, Windows Phone 7.1, Client Profile, and Windows 8. 100% Twitter API coverage. Also available via NuGet! Follow @JoeMayo.BlogEngine.NET: BlogEngine.NET 2.6: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info BlogEngine.NET Hosting - 3 months free! Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take...BlackJumboDog: Ver5.6.2: 2012.05.07 Ver5.6.2 (1) Web???????、????????·????????? (2) Web???????、?????????? COMSPEC PATHEXT WINDIR SERVERADDR SERVERPORT DOCUMENTROOT SERVERADMIN REMOTE_PORT HTTPACCEPTCHRSET HTTPACCEPTLANGUAGE HTTPACCEPTEXCODINGNew ProjectsAkumu Island: Akumu Island is a game being developed by Jared Thomson. At this time, things are still fairly under wraps. The source code is still available though.BasicSocialNetworkingSite: Basic/Simple Social Networking Web Site using C# - ASP.NETCasse Brique: Projet Casse-brique.Cdts.iOS: Cdts iOSCluster2: To be Published...CrowdMOS: CrowdMOS is a set of scripts and tools for performing evaluations of the subjective quality of media such as audio or images using crowdsourcing via Amazon Mechanical Turk. This project is designed to enable low cost, efficient assessments of signal processing algorithms, e.g., compression, denoising, or enhancement, using standard tests such as MOS (Mean Opinion Score) or MUSHRA.Data Frame Loader: A simple C# API for loading tabular dataframes into Microsoft SQL Server database using only a small number of tables to represent any kind of dataframe.Dynamic Segmentation Utility SOE Rest: Dynamic Segmentation Utility SOE Rest for ArcGIS Server 10 (msd)field2012: This is private projectFix soft HyperAero Form: Fix soft Aero Form (HyperAero Edition) works on both xp and Win7 and supports Customizable Animation Effects (On showing and closing form),Gradient Support (Multicolor Gradient Background,Gradient Editor Control),Power Functions (Shutdown,etc with Timer support) ,Aero Glass Support (Extend Margins,Aero Blur,Aero Glow text,Basic Theme Support),Aero Properties (IsWindowsAeroEnabled,AeroColor and opacity),Aero Events,Unlock Hidden Properties (EnableCloseButton, CaptionRenderMode, ActivateOn...Gamer: A program intended to be a PC gamers' companion app by providing features such as: * Customizable system tray menu that lists (favourite/frequent/all) games (as shown in the Windows Games Explorer) for quick launching (and clean desktops). * Ability to edit listings in the Windows Game Explorer * Once these goals are met other handy features can be implemented to increase the value of this app. This program should compliment existing programs used by gamers rather than compete w...gGrid - Editable jQuery Grid: This a jQuery plugin. The plugin will add three buttons Add/Edit/Delete which will need a popup control to add/edit data. Developer using this plugin need to define an HTML table and an HTML DIV which will be used for popup. Also MVC action method to handle the CRUD operation. The plug requires an MVC partial view to be returned from the add edit delete methods to update the table data.HoiChoMuaBan: h?i ch? mua bánmyfirstgit: ???????Nova Code: Nova code is a language to implement processor instructions, states, and other features planned soon for the NEmulation framework. Right now this project will be worked on separately, then integrated into NEmulation.Pocket Book App: Just try it!State Machine .netmf: StateMachineExample for .netmf C# uVersionClientCache: uVersionClientCache is a custom macro to always automatically version (URL querstring parameter) your files based on a MD5 hash of the file contents or file last modified date to prevent issues with client browsers caching an old file after you have changed it.XNA Shader Composer: XNA Shader Composer is a solution for Visual Studio 2010 and XNA 4.0. The goal is to create an environment for learn and create differents HLSL programs.???Disable????: ??????????????errdisable??,????????。

    Read the article

  • CodePlex Daily Summary for Friday, October 25, 2013

    CodePlex Daily Summary for Friday, October 25, 2013Popular Releases7zbackup - PowerShell Script to Backup Files with 7zip: 7zBackup v. 1.9.5 Stable: Do you like this piece of software ? It took some time and effort to develop. Please consider a helping me with a donation Or please visit my blog Code : Rewritten the launcher of 7zip whith "old" fashioned batch. Better handling of exit codes Feat : New argument --notifyextra to drive the way extra information is delivered with the notification log Bug : NoFollowJunctions switch was inverted Feat : Added new directives maxfilesize and minfilesize to enhance file selection upon their ...Gac Library -- C++ Utilities for GPU Accelerated GUI and Script: Gaclib 0.5.5.0: Gaclib.zip contains the following content GacUIDemo Demo solution and projects Public Source GacUI library Document HTML document. Please start at reference_gacui.html Content Necessary CSS/JPG files for document. Improvements to the previous release Add 1 demos Editor.Toolstrip.Document Added new features GuiDocumentViewer and GuiDocumentLabel is editable like an RichTextEdit control.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.0.7: This is a bug fix release, containing some important fixes! Fixed issue where Session 0 was not detected correctly, resulting in issues when attempting to display a UI when none was allowed Fixed Installation Prompt and Installation Restart Prompt appearing when deploy mode was non-interactive or silent Fixed issue where defer prompt is displayed after force closing multiple applications Fixed issue executing blocked app execution dialog from UNC path (executed instead from local tempo...BlackJumboDog: Ver5.9.7: 2013.10.24 Ver5.9.7 (1)FTP???????、2?????????????shift-jis????????????? (2)????HTTP????、???????POST??????????????????CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.1.0.34322 Alpha 4: This experimental release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Based on Firestorm viewer 4.4.2 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-1-0-34322-alpha-4 Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or sup...ImapX 2: ImapX 2.0.0.13: The long awaited ImapX 2.0.0.13 release. The library has been rewritten from scratch, massive optimizations and refactoring done. Several new features introduced. Added support for Mono. Added support for Windows Phone 7.1 and 8.0 Added support for .Net 2.0, 3.0 Simplified connecting to server by reducing the number of parameters and adding automatic port selection. Changed authentication handling to be universal and allowing to build custom providers. Added advanced server featur...VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 32 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) This release has been tested with Visual Studio 2008, 2010, 2012 and 2013, using TortoiseSVN 1.6, 1.7 and 1.8. It should also still work with Visual Studio 2005, but I couldn't find anyone to test it in VS2005. Build 32 (beta) changelogNew: Added Visual Studio 2013 support New: Added Visual Studio 2012 support New: Added SVN 1.8 support New: Added 'Ch...ABCat: ABCat v.2.0.1a: ?????????? ???????? ? ?????????? ?????? ???? ??? Win7. ????????? ?????? ????????? ?? ???????. ????? ?????, ???? ????? ???????? ????????? ?????????? ????????? "?? ??????? ????? ???????????? ?????????? ??????...", ?? ?????????? ??????? ? ?????????? ?????? Microsoft SQL Ce ?? ????????? ??????: http://www.microsoft.com/en-us/download/details.aspx?id=17876. ???????? ?????? x64 ??? x86 ? ??????????? ?? ?????? ???????????? ???????. ??? ??????? ????????? ?? ?????????? ?????? Entity Framework, ? ???? ...patterns & practices: Data Access Guidance: Data Access Guidance 2013: This is the 2013 release of Data Access Guidance. The documentation for this RI is also available on MSDN: Data Access for Highly-Scalable Solutions: Using SQL, NoSQL, and Polyglot Persistence: http://msdn.microsoft.com/en-us/library/dn271399.aspxMedia Companion: Media Companion MC3.584b: IMDB changes fixed. Fixed* mc_com.exe - Fixed to using new profile entries. * Movie - fixed rename movie and folder if use foldername selected. * Movie - Alt Edit Movie, trailer url check if changed and confirm valid. * Movie - Fixed IMDB poster scraping * Movie - Fixed outline and Plot scraping, including removal of Hyperlink's. * Movie Poster refactoring, attempts to catch gdi+ errors Revision HistoryJayData -The unified data access library for JavaScript: JayData 1.3.4: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like WebAPI, OData, MongoDB, WebSQL, SQLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with KendoUI, Angular.js, Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video KendoUI examples: JayData example site Examples for map integration JayData example site What's new in JayData 1.3.4 For detailed release notes check ...TerrariViewer: TerrariViewer v7.2 [Terraria Inventory Editor]: Added "Check for Update" button Hopefully fixed Windows XP issue You can now backspace in Item stack fieldsVirtual Wifi Hotspot for Windows 7 & 8: Virtual Router Plus 2.6.0: Virtual Router Plus 2.6.0Fast YouTube Downloader: Fast YouTube Downloader 2.3.0: Fast YouTube DownloaderMagick.NET: Magick.NET 6.8.7.101: Magick.NET linked with ImageMagick 6.8.7.1. Breaking changes: - Renamed Matrix classes: MatrixColor = ColorMatrix and MatrixConvolve = ConvolveMatrix. - Renamed Depth method with Channels parameter to BitDepth and changed the other method into a property.VidCoder: 1.5.9 Beta: Added Rip DVD and Rip Blu-ray AutoPlay actions for Windows: now you can have VidCoder start up and scan a disc when you insert it. Go to Start -> AutoPlay to set it up. Added error message for Windows XP users rather than letting it crash. Removed "quality" preset from list for QSV as it currently doesn't offer much improvement. Changed installer to ignore version number when copying files over. Should reduce the chances of a bug from me forgetting to increment a version number. Fixed ...MSBuild Extension Pack: October 2013: Release Blog Post The MSBuild Extension Pack October 2013 release provides a collection of over 480 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...VG-Ripper & PG-Ripper: VG-Ripper 2.9.49: changes NEW: Added Support for "ImageTeam.org links NEW: Added Support for "ImgNext.com" links NEW: Added Support for "HostUrImage.com" links NEW: Added Support for "3XVintage.com" linksmyCollections: Version 2.8.7.0: New in this version : Added Public Rating Added Collection Number Added Order by Collection Number Improved XBMC integrations Play on music item will now launch default player. Settings are now saved in database. Tooltip now display sort information. Fix Issue with Stars on card view. Fix Bug with PDF Export. Fix Bug with technical information's. Fix HotMovies Provider. Improved Performance on Save. Bug FixingMoreTerra (Terraria World Viewer): MoreTerra 1.11.3.1: Release 1.11.3.1 ================ = New Features = ================ Added markers for Copper Cache, Silver Cache and the Enchanted Sword. ============= = Bug Fixes = ============= Use Official Colors now no longer tries to change the Draw Wires option instead. World reading was breaking for people with a stock 1.2 Terraria version. Changed world name reading so it does not crash the program if you load MoreTerra while Terraria is saving the world. =================== = Feature Removal = =...New ProjectsAdder: Adder is simply converter for WPF binding. They add a value from parameter to target if a target int or double, concatenate parameter and value if type a strinAir Control ATV: App for Windows Phone to remote control Apple TV with FireCore aTV Flash (or Black) and AirControl installed.Bangladeshi Open Source Windows 8/Phone Apps: The largest Bangladeshi Open Source project with a vision. Mostly community-contributed Windows 8 and Windows Phone apps.BTB: Tumor board presentation tool for oncologyBulletin: not completed yet. the basic functions are ready, though.CRM Dashboard for Lync: Dynamics CRM Dashboard for Lync is an add-on that makes both applications seamlessly communicate between one another.Crowd CMS: Crowd CMS - A Crowd Funded Web Content Management System Built Using ASP.Net MVC 4 Website: http://www.crowdcms.co.uk CrowdCube: http://goo.gl/Mnd1Xsdusanproject: It is a project for Web Scripting and Application Development (COM), School of Computer of Science, University of HertfordshireElectronic Integrated Disease Surveillance System (EIDSS™) - Web Version: EIDSS can be configured as an electronic disease surveillance network, implemented in a region, to support public health practitioners and epidemiologists.Facebook Login Tool: Facebook Login ToolGadgeteer interface: Project aimed at creating common wrappers and interfaces for common components. This would allow for building applications based on the interfaces, this should Madoko: Madoko is a fast javascript Markdown processor written in Koka. It can render beautiful HTML and PDF (via LaTeX) and supports many Markdown extensions.MinotaurTeam: Project Management System using ASP.NET MVCmobSocial: Open Source Social Network for free!Online Room Reservation for Exchange: When you have Microsoft Exchange Server and meeting rooms you share with people from outside your company this is the ideal application for you.Pescar2013-shop-Masapan: aproyecto_Andy_y_Meli: mely and andyQMachine: A platform for World Wide Computingquarkz: It's just a try-out of Visual C++ (on example of Windows Forms Application). In this project I tried out to re-write one simple Flash game called quarkz in VC++TFS Workspaces Cleaner: TFS Workspaces Cleaner deletes Team Foundation Server workspaces that have not been accessed in a number of days, along with their files locally on disk.Ticketing System With ASP.NET MVC: Ticketing System where visitors (without authentication) should be able to view most commented tickets, as well as to register and login in the system. RegisterTotalFreedom Angular JS MVC: This library provides more tight integration between C# classes and AngularJS, helps to those who prefer to use as much C# and as little JavaScript as possiblevWordToHtml: vWordToHtmlvwpHistory: vwpHistoryweibowinform: weibowinformweibowinformweibowinformweibowinformweibowinformweibowinformweibowinformweibowinformweibowinformweibowinformweibowinformXompare - XML files comparison: Xompare - XML files comparison

    Read the article

  • CodePlex Daily Summary for Thursday, November 01, 2012

    CodePlex Daily Summary for Thursday, November 01, 2012Popular ReleasesAccess 2010 Application Platform - Build Your Own Database: Application Platform - 0.0.1: Initial Release This is the first version of the database. At the moment is all contained in one file to make development easier, but the obvious idea would be to split it into Front and Back End for a production version of the tool. The features it contains at the moment are the "Core" features.Python Tools for Visual Studio: Python Tools for Visual Studio 1.5: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. For a quick overview of the general IDE experience, please watch this video There are a number of exciting improvement in this release comp...Devpad: 4.25: Whats new for Devpad 4.25: New Theme support New Export Wordpress Minor Bug Fix's, improvements and speed upsAssaultCube Reloaded: 2.5.5: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: Fixed potential bot bugs: Map change, OpenAL...Edi: Edi 1.0 with DarkExpression: Added DarkExpression theme (dialogs and message boxes are not completely themed, yet)MCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...MVVM Light Toolkit: MVVM Light Toolkit V4.1 for Visual Studio 2012: This version only supports Visual Studio 2012 (and all Express editions too). If you use Visual Studio 2010, please stay tuned, we will publish an update in a few days with support for VS10. V4.1 supports: Windows Phone 8 Windows 8 (Windows RT) Silverlight 5 Silverlight 4 WPF 4.5 WPF 4 WPF 3.5 And the following development environments: Visual Studio 2012 (Pro, Premium, Ultimate) Visual Studio 2012 Express for Windows 8 Visual Studio 2012 Express for Windows Phone 8 Visual...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.Liberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...New ProjectsAsbesto: Proyecto grupo: "2ravas" para Laboratorio de Computación IV de la carrera TSP de la UTN-FRGP Realizado en C# y ASP.NET en Visual Studio 2012 y SQL Server 2012C++ Diamond printer on console without if statement: prints just a diamond with stars(*). only one important and funny feature is that it's not using 'if' statement. C++ used.CloudTest: Test cloud computing projectEnumeration of objects Class Library C#: At core level in Java I like extension of traditional enum type permiting use as the elements instances of a class. The project implements the same idea by C# with some more advanced features like a set type with boolean operators extending idea of FlagsAttributeEquation Inversion: Visual Studion 2008 Add-in for equation inversions.ESENT Serialization Class Library: ESENT Serialization class library is built above Managed ESENT. It allows you to store your objects in the underlying extensible storage engine database.ForceHttps: Very simple httpModule to ensure that all http requests are https. 1. Drop the dll into your website's bin directory 2. Update httpModules section of your web.config to reference the dll 3. Make sure your Web Server can handle SSL requests for the URL ALL http requests will be redirected as https.forrajeriaPAV2: tp pav2 asd as asd as fasfjaijiasjifoa as asf asf as afs fas asf afs fsaGoogle Analytics for WinRT: A Windows Store (WinRT) class library for tracking Google Analytics page views, events, and custom variables for your Metro style desktop and tablet apps.huanglitest10312: mvc projectiMan: iMan will be your own port manager, which help to provide the information about all the ports open in your PC It's completely developed in .NET C#InjectionCop: Facilitates secure coding through static code analysis and contract annotations in the Common Language Infrastructure.Master of Olympus: Remake of Master of Olympus : Zeus, a game developed by Impressions Games in 2000.MediaScribe: MediaScribe is a note app for your media.MouseNestDotNet: A small personal website application.Project Estimator ???????? ?? ?????????????? ?? ???????: Project Estimator ? ???????? ??????????? ? ??????????? ?? ????? ? ???????? ????.Projekt grupowy 1: Project created only for school purpose.SecondHandApp: Warenwirtschaftsprogramm für denn SecondHand LädenSimple .NET XML Serialization: .NET's XML serialization using Linq XObject classes EG: XElement in an IXmlSerializable base classStrip Converter: A Very Handy Converter for 2D Games Developers Developer Website: http://www.bluebulk.infoSwitch JS Control (Client Side): Switch JS control is a very light client side library to create switch(es) on web applications or mobile applications.VisaSys: Visa System????????: TODO::????

    Read the article

  • Stumbling Through: Visual Studio 2010 (Part I)

    Ive spent the better part of the last two years doing nothing but K2 workflow development, which until very recently could only be done in Visual Studio 2005 so I am a bit behind the times. I seem to have skipped over using Visual Studio 2008 entirely, and I am now ready to stumble through all that Ive missed. Not that I will abandon my K2 ramblings, but I need to get back to some of the other technologies I am passionate about but havent had the option of working with them on a day-to-day basis as I have with K2 blackpearl. Specifically, I am going to be focusing my efforts on what is new in the Entity Framework and WPF in Visual Studio 2010, though you have to keep in mind that since I have skipped VS 2008, I may be giving VS 2010 credit for things that really have been around for a while (hey, if I havent seen it, it is new to me!). I have the following simple goals in mind for this exercise: Entity Framework Model an inherited class Entity Framework Model a lookup entity WPF Bind a list of entities WPF - on selection of an entity in the bound list, display values of the selected entity WPF For the lookup field, provide a dropdown of potential values to lookup All of these goals must be accomplished using as little code as possible, relying on the features we get out of the box in Visual Studio 2010. This isnt going to be rocket science here, Im not even looking to get or save this data from/to a data source, but I gotta start somewhere and hopefully it will grow into something more interesting. For this exercise, I am going to try to model some fictional data about football players and personnel (maybe turning this into some sort of NFL simulation game if I lose my job and can play with this all day), so Ill start with a Person class that has a name property, and extend that with a Player class to include a Position lookup property. The idea is that a Person can be a Player, Coach or whatever other personnel type may be associated with a football team but well only flesh out the Player aspect of a person for this. So to get started, I fired up Visual Studio 2010 and created a new WPF Application: To this project, I added a new ADO.NET Entity Data Model named PlayerModel (for now, not sure what will be an appropriate name so this may be revisited): I chose for it to be an empty model, as I dont have a database designed for this yet: Using the toolbox, I dragged out an entity for each of the items we identified earlier: Person, Player and Position, and gave them some simple properties (note that I kept the default Id property for each of them): Now to figure out how to link these things together the way I want to first, lets try to tell it that Player extends Person. I see that Inheritance is one of the items in the toolbox, but I cant seem to drag it out anywhere onto the canvas. However, when I right-click an element, I get the option to Add Inheritance to it, which gives us exactly what we want: Ok, now that we have that, how do we tell it that each player has a position? Well, despite association being in the toolbox, I have learned that you cant just drag and drop those elements so I right click Player and select Add -> Association to get the following dialog: I see the option here to Add foreign key properties to my entities Ive read somewhere this this is a new and highly-sought after feature so Ill see what it does. Selecting it includes a PositionId on the Player element for me, which seems pretty database-centric and I would like to see if I can live without it for now given that we also got the Position property out of this association. Ill bring it back into the fold if it ends up being useful later. Here is what we end up with now: Trying to compile this resulted in an error stating that the Player entity cannot have an Id, because the Person element it extends already has a property named Id. Makes sense, so I remove it and compile again. Success, but with a warning but success is a good thing so Ill pretend I didnt see that warning for now. It probably has to do with the fact that my Player entity is now pretty useless as it doesnt have any non-navigation properties. So things seem to match what we are going for, great now what the heck do we do with this? Lets switch gears and see what we get for free dealing with this model from the UI. Lets open up the MainWindow.xaml and see if we can connect to our entities as a data source. Hey, whats this? Have you read my mind, Visual Studio? Our entities are already listed in the Data Sources panel: I do notice, however, that our Player entity is missing. Is this due to that compilation warning? Ill add a bogus property to our player entity just to see if that is the case no, still no love. The warning reads: Error 2062: No mapping specified for instances of the EntitySet and AssociationSet in the EntityContainer PlayerModelContainer. Well if everything worked without any issues, then I wouldnt be stumbling through at all, so lets get to the bottom of this. My good friend google indicates that the warning is due to the model not being tied up to a database. Hmmm, so why dont Players show up in my data sources? A little bit of drill-down shows that they are, in fact, exposed under Positions: Well now that isnt quite what I want. While you could get to players through a position, it shouldnt be that way exclusively. Oh well, I can ignore that for now lets drag Players out onto the canvas after selecting List from the dropdown: Hey, what the heck? I wanted a list not a listview. Get rid of that list view that was just dropped, drop in a listbox and then drop the Players entity into it. That will bind it for us. Of course, there isnt any data to show, which brings us to the really hacky part of all this and that is to stuff some test data into our view source without actually getting it from any data source. To do this through code, we need to grab a reference to the positionsPlayersViewSource resource that was created for us when we dragged out our Players entity. We then set the source of that reference equal to a populated list of Players.  Well add a couple of players that way as well as a few positions via the positionsViewSource resource, and Ill ensure that each player has a position specified.  Ultimately, the code looks like this: System.Windows.Data.CollectionViewSource positionViewSource = ((System.Windows.Data.CollectionViewSource)(this.FindResource("positionsViewSource")));             List<Position> positions = new List<Position>();             Position newPosition = new Position();             newPosition.Id = 0;             newPosition.Name = "WR";             positions.Add(newPosition);             newPosition = new Position();             newPosition.Id = 1;             newPosition.Name = "RB";             positions.Add(newPosition);             newPosition = new Position();             newPosition.Id = 2;             newPosition.Name = "QB";             positions.Add(newPosition);             positionViewSource.Source = positions;             System.Windows.Data.CollectionViewSource playerViewSource = ((System.Windows.Data.CollectionViewSource)(this.FindResource("positionsPlayersViewSource")));             List<Player> players = new List<Player>();             Player newPlayer = new Player();             newPlayer.Id = 0;             newPlayer.Name = "Test Dude";             newPlayer.Position = positions[0];             players.Add(newPlayer);             newPlayer = new Player();             newPlayer.Id = 1;             newPlayer.Name = "Test Dude II";             newPlayer.Position = positions[1];             players.Add(newPlayer);             newPlayer = new Player();             newPlayer.Id = 2;             newPlayer.Name = "Test Dude III";             newPlayer.Position = positions[2];             players.Add(newPlayer);             playerViewSource.Source = players; Now that our views are being loaded with data, we can go about tying things together visually. Drop a text box (to show the selected players name) and a combo box (to show the selected players position). Drag the Positions entity from the data sources panel to the combo box to wire it up to the positions view source. Click the text box that was dragged, and find its Text property in the properties pane. There is a little glyph next to it that displays Advanced Properties when hovered over click this and then select Apply Data Binding. In the dialog that appears, we can select the current players name as the value to bind to: Similarly, we can wire up the combo boxs SelectedItem value to the current players position: When the application is executed and we navigate through the various players, we automatically get their name and position bound to the appropriate fields: All of this was accomplished with no code save for loading the test data, and I might add, it was pretty intuitive to do so via the drag and drop of entities straight from the data sources panel. So maybe all of this was old hat to you, but I was very impressed with this experience and I look forward to stumbling through the caveats of doing more complex data modeling and binding in this fashion. Next up, I suppose, will be figuring out how to get the entities to get real data from a data source instead of stuffing it with test data as well as trying to figure out why Players ended up being under Positions in the data sources panel.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Using CSS3 media queries in HTML 5 pages

    - by nikolaosk
    This is going to be the seventh post in a series of posts regarding HTML 5. You can find the other posts here , here , here, here , here and here. In this post I will provide a hands-on example on how to use CSS 3 Media Queries in HTML 5 pages. This is a very important feature since nowadays lots of users view websites through their mobile devices. Web designers were able to define media-specific style sheets for quite a while, but have been limited to the type of output. The output could only be Screen, Print .The way we used to do things before CSS 3 was to have separate CSS files and the browser decided which style sheet to use. Please have a look at the snippet below - HTML 4 media queries <link rel="stylesheet" type="text/css" media="screen" href="styles.css"> <link rel="stylesheet" type="text/css" media="print" href="print-styles.css"> ?he browser determines which style to use. With CSS 3 we can have all media queries in one stylesheet. Media queries can determine the resolution of the device, the orientation of the device, the width and height of the device and the width and height of the browser window.We can also include CSS 3 media queries in separate stylesheets. In order to be absolutely clear this is not (and could not be) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School. Another excellent resource is HTML 5 Doctor. Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr. In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. Before I go on with the actual demo I will use the (http://www.caniuse.com) to see the support for CSS 3 Media Queries from the latest versions of modern browsers. Please have a look at the picture below. We see that all the latest versions of modern browsers support this feature. We can see that even IE 9 supports this feature.   Let's move on with the actual demo.  This is going to be a rather simple demo.I create a simple HTML 5 page. The markup follows and it is very easy to use and understand.This is a page with a 2 column layout. <!DOCTYPE html><html lang="en">  <head>    <title>HTML 5, CSS3 and JQuery</title>    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >    <link rel="stylesheet" type="text/css" href="style.css">       </head>  <body>    <div id="header">      <h1>Learn cutting edge technologies</h1>      <p>HTML 5, JQuery, CSS3</p>    </div>    <div id="main">      <div id="mainnews">        <div>          <h2>HTML 5</h2>        </div>        <div>          <p>            HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML.          </p>          <div class="quote">            <h4>Do More with Less</h4>            <p>             jQuery is a fast and concise JavaScript Library that simplifies HTML document traversing, event handling, animating, and Ajax interactions for rapid web development.             </p>            </div>          <p>            The HTML5 test(html5test.com) score is an indication of how well your browser supports the upcoming HTML5 standard and related specifications. Even though the specification isn't finalized yet, all major browser manufacturers are making sure their browser is ready for the future. Find out which parts of HTML5 are already supported by your browser today and compare the results with other browsers.                      The HTML5 test does not try to test all of the new features offered by HTML5, nor does it try to test the functionality of each feature it does detect. Despite these shortcomings we hope that by quantifying the level of support users and web developers will get an idea of how hard the browser manufacturers work on improving their browsers and the web as a development platform.</p>        </div>      </div>              <div id="CSS">        <div>          <h2>CSS 3 Intro</h2>        </div>        <div>          <p>          Cascading Style Sheets (CSS) is a style sheet language used for describing the presentation semantics (the look and formatting) of a document written in a markup language. Its most common application is to style web pages written in HTML and XHTML, but the language can also be applied to any kind of XML document, including plain XML, SVG and XUL.          </p>        </div>      </div>            <div id="CSSmore">        <div>          <h2>CSS 3 Purpose</h2>        </div>        <div>          <p>            CSS is designed primarily to enable the separation of document content (written in HTML or a similar markup language) from document presentation, including elements such as the layout, colors, and fonts.[1] This separation can improve content accessibility, provide more flexibility and control in the specification of presentation characteristics, enable multiple pages to share formatting, and reduce complexity and repetition in the structural content (such as by allowing for tableless web design).          </p>        </div>      </div>                </div>    <div id="footer">        <p>Feel free to google more about the subject</p>      </div>     </body>  </html>    The CSS code (style.css) follows  body{        line-height: 30px;        width: 1024px;        background-color:#eee;      }            p{        font-size:17px;    font-family:"Comic Sans MS"      }      p,h2,h3,h4{        margin: 0 0 20px 0;      }            #main, #header, #footer{        width: 100%;        margin: 0px auto;        display:block;      }            #header{        text-align: center;         border-bottom: 1px solid #000;         margin-bottom: 30px;      }            #footer{        text-align: center;         border-top: 1px solid #000;         margin-bottom: 30px;      }            .quote{        width: 200px;       margin-left: 10px;       padding: 5px;       float: right;       border: 2px solid #000;       background-color:#F9ACAE;      }            .quote :last-child{        margin-bottom: 0;      }            #main{        column-count:2;        column-gap:20px;        column-rule: 1px solid #000;        -moz-column-count: 2;        -webkit-column-count: 2;        -moz-column-gap: 20px;        -webkit-column-gap: 20px;        -moz-column-rule: 1px solid #000;        -webkit-column-rule: 1px solid #000;      } Now I view the page in the browser.Now I am going to write a media query and add some more rules in the .css file in order to change the layout of the page when the page is viewed by mobile devices. @media only screen and (max-width: 480px) {          body{            width: 480px;          }          #main{            -moz-column-count: 1;            -webkit-column-count: 1;          }        }   I am specifying that this media query applies only to screen and a max width of 480 px. If this condition is true, then I add new rules for the body element. I change the number of columns to one. This rule will not be applied unless the maximum width is 480px or less.  As I decrease the size-width of the browser window I see no change in the column's layout. Have a look at the picture below. When I resize the window and the width of the browser so the width is less than 480px, the media query and its respective rules take effect.We can scroll vertically to view the content which is a more optimised viewing experience for mobile devices. Have a look at the picture below Hope it helps!!!!

    Read the article

  • Creating PHP Forms with show/hide functionality [migrated]

    - by ronquiq
    I want to create two reports and submit the report data to database by using two functions defined in a class: Here I have two buttons: "Create ES" and "Create RP". Rightnow, my forms are working fine, I can insert data successfully, but the problem was when I click on submit after filling the form data, the content is hiding and displays the fist div content "cs_content" and again I need to onclick to submit again. Could anyone give a solution for this. Requirement : When I click on "Create CS", I should be able to fill the form and submit data successfully with a message within "cs_content" and any form input errors, the errors should display within "cs_content". When I click on "Create RP", I should be able to fill the form and submit data successfully with a message within "rp_content" and any form input errors, the errors should display within "rp_content". home.php <?php require 'classes/class.report.php'; $report = new Report($db); ?> <html> <head> <script src="js/jqueryv1.10.2.js"></script> <script> $ (document).ready(function () { //$("#cs_content").show(); $('#cs').click(function () { $('#cs_content').fadeIn('slow'); $('#rp_content').hide(); }); $('#rp').click(function () { $('#rp_content').fadeIn('slow'); $('#cs_content').hide(); }); }); </script> </head> <body> <div class="container2"> <div style="margin:0px 0px;padding:3px 217px;overflow:hidden;"> <div id="cs" style="float:left;margin:0px 0px;padding:7px;"><input type="button" value="CREATE CS"></div> <div id="rp" style="float:left;margin:0px 0px;padding:7px;"><input type="button" value="CREATE RP"></div><br> </div> <div id="cs_content"> <?php $report->create_cs_report(); ?> </div> <div id="rp_content" style="display:none;"> <?php $report->create_rp_report(); ?> </div> </div> </body> </html> class.report.php <?php class Report { private $db; public function __construct($database){ $this->db = $database; } public function create_cs_report() { if (isset($_POST['create_es_report'])) { $report_name = htmlentities($_POST['report_name']); $from_address = htmlentities($_POST['from_address']); $subject = htmlentities($_POST['subject']); $reply_to = htmlentities($_POST['reply_to']); if (empty($_POST['report_name']) || empty($_POST['from_address']) || empty($_POST['subject']) || empty($_POST['reply_to'])) { $errors[] = '<span class="error">All fields are required.</span>'; } else { if (isset($_POST['report_name']) && empty($_POST['report_name'])) { $errors[] = '<span class="error">Report Name is required</span>'; } else if (!ctype_alnum($_POST['report_name'])) { $errors[] = '<span class="error">Report Name: Whitespace is not allowed, only alphabets and numbers are required</span>'; } if (isset($_POST['from_address']) && empty($_POST['from_address'])) { $errors[] = '<span class="error">From address is required</span>'; } else if (filter_var($_POST['from_address'], FILTER_VALIDATE_EMAIL) === false) { $errors[] = '<span class="error">Please enter a valid From address</span>'; } if (isset($_POST['subject']) && empty($_POST['subject'])) { $errors[] = '<span class="error">Subject is required</span>'; } else if (!ctype_alnum($_POST['subject'])) { $errors[] = '<span class="error">Subject: Whitespace is not allowed, only alphabets and numbers are required</span>'; } if (isset($_POST['reply_to']) && empty($_POST['reply_to'])) { $errors[] = '<span class="error">Reply To is required</span>'; } else if (filter_var($_POST['reply_to'], FILTER_VALIDATE_EMAIL) === false) { $errors[] = '<span class="error">Please enter a valid Reply-To address</span>'; } } if (empty($errors) === true) { $query = $this->db->prepare("INSERT INTO report(report_name, from_address, subject, reply_to) VALUES (?, ?, ?, ?) "); $query->bindValue(1, $report_name); $query->bindValue(2, $from_address); $query->bindValue(3, $subject); $query->bindValue(4, $reply_to); try { $query->execute(); } catch(PDOException $e) { die($e->getMessage()); } header('Location:home.php?success'); exit(); } } if (isset($_GET['success']) && empty($_GET['success'])) { header('Location:home.php'); echo '<span class="error">Report is succesfully created</span>'; } ?> <form action="" method="POST" accept-charset="UTF-8"> <div style="font-weight:bold;padding:17px 80px;text-decoration:underline;">Section A</div> <table class="create_report"> <tr><td><label>Report Name</label><span style="color:#A60000">*</span></td> <td><input type="text" name="report_name" required placeholder="Name of the report" value="<?php if(isset($_POST["report_name"])) echo $report_name; ?>" size="30" maxlength="30"> </td></tr> <tr><td><label>From</label><span style="color:#A60000">*</span></td> <td><input type="text" name="from_address" required placeholder="From address" value="<?php if(isset($_POST["from_address"])) echo $from_address; ?>" size="30"> </td></tr> <tr><td><label>Subject</label><span style="color:#A60000">*</span></td> <td><input type="text" name="subject" required placeholder="Subject" value="<?php if(isset($_POST["subject"])) echo $subject; ?>" size="30"> </td></tr> <tr><td><label>Reply To</label><span style="color:#A60000">*</span></td> <td><input type="text" name="reply_to" required placeholder="Reply address" value="<?php if(isset($_POST["reply_to"])) echo $reply_to; ?>" size="30"> </td></tr> <tr><td><input type="submit" value="create report" style="background:#8AC007;color:#080808;padding:6px;" name="create_es_report"></td></tr> </table> </form> <?php //IF THERE ARE ERRORS, THEY WOULD BE DISPLAY HERE if (empty($errors) === false) { echo '<div>' . implode('</p><p>', $errors) . '</div>'; } } public function create_rp_report() { if (isset($_POST['create_rp_report'])) { $report_name = htmlentities($_POST['report_name']); $to_address = htmlentities($_POST['to_address']); $subject = htmlentities($_POST['subject']); $reply_to = htmlentities($_POST['reply_to']); if (empty($_POST['report_name']) || empty($_POST['to_address']) || empty($_POST['subject']) || empty($_POST['reply_to'])) { $errors[] = '<span class="error">All fields are required.</span>'; } else { if (isset($_POST['report_name']) && empty($_POST['report_name'])) { $errors[] = '<span class="error">Report Name is required</span>'; } else if (!ctype_alnum($_POST['report_name'])) { $errors[] = '<span class="error">Report Name: Whitespace is not allowed, only alphabets and numbers are required</span>'; } if (isset($_POST['to_address']) && empty($_POST['to_address'])) { $errors[] = '<span class="error">to address is required</span>'; } else if (filter_var($_POST['to_address'], FILTER_VALIDATE_EMAIL) === false) { $errors[] = '<span class="error">Please enter a valid to address</span>'; } if (isset($_POST['subject']) && empty($_POST['subject'])) { $errors[] = '<span class="error">Subject is required</span>'; } else if (!ctype_alnum($_POST['subject'])) { $errors[] = '<span class="error">Subject: Whitespace is not allowed, only alphabets and numbers are required</span>'; } if (isset($_POST['reply_to']) && empty($_POST['reply_to'])) { $errors[] = '<span class="error">Reply To is required</span>'; } else if (filter_var($_POST['reply_to'], FILTER_VALIDATE_EMAIL) === false) { $errors[] = '<span class="error">Please enter a valid Reply-To address</span>'; } } if (empty($errors) === true) { $query = $this->db->prepare("INSERT INTO report(report_name, to_address, subject, reply_to) VALUES (?, ?, ?, ?) "); $query->bindValue(1, $report_name); $query->bindValue(2, $to_address); $query->bindValue(3, $subject); $query->bindValue(4, $reply_to); try { $query->execute(); } catch(PDOException $e) { die($e->getMessage()); } header('Location:home.php?success'); exit(); } } if (isset($_GET['success']) && empty($_GET['success'])) { header('Location:home.php'); echo '<span class="error">Report is succesfully created</span>'; } ?> <form action="" method="POST" accept-charset="UTF-8"> <div style="font-weight:bold;padding:17px 80px;text-decoration:underline;">Section A</div> <table class="create_report"> <tr><td><label>Report Name</label><span style="color:#A60000">*</span></td> <td><input type="text" name="report_name" required placeholder="Name of the report" value="<?php if(isset($_POST["report_name"])) echo $report_name; ?>" size="30" maxlength="30"> </td></tr> <tr><td><label>to</label><span style="color:#A60000">*</span></td> <td><input type="text" name="to_address" required placeholder="to address" value="<?php if(isset($_POST["to_address"])) echo $to_address; ?>" size="30"> </td></tr> <tr><td><label>Subject</label><span style="color:#A60000">*</span></td> <td><input type="text" name="subject" required placeholder="Subject" value="<?php if(isset($_POST["subject"])) echo $subject; ?>" size="30"> </td></tr> <tr><td><label>Reply To</label><span style="color:#A60000">*</span></td> <td><input type="text" name="reply_to" required placeholder="Reply address" value="<?php if(isset($_POST["reply_to"])) echo $reply_to; ?>" size="30"> </td></tr> <tr><td><input type="submit" value="create report" style="background:#8AC007;color:#080808;padding:6px;" name="create_rp_report"></td></tr> </table> </form> <?php //IF THERE ARE ERRORS, THEY WOULD BE DISPLAY HERE if (empty($errors) === false) { echo '<div>' . implode('</p><p>', $errors) . '</div>'; } } }//Report CLASS ENDS

    Read the article

  • CodePlex Daily Summary for Saturday, November 03, 2012

    CodePlex Daily Summary for Saturday, November 03, 2012Popular ReleasesZXMAK2: Version 2.6.8.2: fix save to SZX snapshot for +3 model fix +3 ULA timingsLaunchbar: Launchbar 4.2.2.0: This release is the first step in cleaning up the code and using all the latest features of .NET 4.5 Changes 4.2.2 (2012-11-02) Improved handling of left clicks 4.1.0 (2012-10-17) Removed tray icon Assembly renamed and signed with strong name Note When you upgrade, Launchbar will start with the default settings. You can import your previous settings by following these steps: Run Launchbar and just save the settings without configuring anything Shutdown Launchbar Go to the folder %LOCA...CommonLibrary.NET: CommonLibrary.NET 0.9.8.8: Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.8 - Final ReleaseApplication: FluentScript Version: 0.9.8.8 Build: 0.9.8.8 Changeset: 77368 ( CommonLibrary.NET ) Release date: November 2nd, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com/ Download: http://commonlibrarynet.codeplex.com/releases/view/90426 Source code: http://common...Mouse Jiggler: MouseJiggle-1.3: This adds the much-requested minimize-to-tray feature to Mouse Jiggler.Umbraco CMS: Umbraco 4.10.0 Release Candidate: This is a Release Candidate, which means that if we do not find any major issues in the next week, we will release this version as the final release of 4.10.0 on November 9th, 2012. The documentation for the MVC bits still lives in the Github version of the docs for now and will be updated on our.umbraco.org with the final release of 4.10.0. Browse the documentation here: https://github.com/umbraco/Umbraco4Docs/tree/4.8.0/Documentation/Reference/Mvc If you want to do only MVC then make sur...Skype Auto Recorder: SkypeAutoRecorder 1.3.4: New icon and images. Reworked settings window. Implemented high-quality sound encoding. Implemented a possibility to produce stereo records. Added buttons with system-wide hot keys for manual starting and canceling of recording. Added buttons for opening folder with records. Added Help button. Fixed an issue when recording is continuing after call end. Fixed an issue when recording doesn't start. Fixed several bugs and improved stability. Major refactoring and optimization...Access 2010 Application Platform - Build Your Own Database: Application Platform - 0.0.2: Release 0.0.2 Created two new users. One belongs to the Administrators group and the other to the Public group. User: admin Pass: admin User: guest Pass: guest Initial Release This is the first version of the database. At the moment is all contained in one file to make development easier, but the obvious idea would be to split it into Front and Back End for a production version of the tool. The features it contains at the moment are the "Core" features.Python Tools for Visual Studio: Python Tools for Visual Studio 1.5: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. For a quick overview of the general IDE experience, please watch this video There are a number of exciting improvement in this release comp...BCF.Net: BCF.Net: BCF.Net-20121024 source codeAssaultCube Reloaded: 2.5.5: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: Fixed potential bot bugs: Map change, OpenAL...Edi: Edi 1.0 with DarkExpression: Added DarkExpression theme (dialogs and message boxes are not completely themed, yet)DirectX Tool Kit: October 30, 2012 (add WP8 support): October 30, 2012 Added project files for Windows Phone 8MCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...MVVM Light Toolkit: MVVM Light Toolkit V4.1 for Visual Studio 2012: This version only supports Visual Studio 2012 (and all Express editions too). If you use Visual Studio 2010, please stay tuned, we will publish an update in a few days with support for VS10. V4.1 supports: Windows Phone 8 Windows 8 (Windows RT) Silverlight 5 Silverlight 4 WPF 4.5 WPF 4 WPF 3.5 And the following development environments: Visual Studio 2012 (Pro, Premium, Ultimate) Visual Studio 2012 Express for Windows 8 Visual Studio 2012 Express for Windows Phone 8 Visual...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.RiP-Ripper & PG-Ripper: PG-Ripper 1.4.03: changes NEW: Added Support for the phun.org forum FIXED: Kitty-Kats new Forum UrlLiberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536New Projectsappnitiren: This project's main objective is to deepen my knowledge on developing apps for windows 8 and windows phone and Buddhist philosophy of Nichiren Daishonin. Aspect - TypeScript AOP Framework: A simple AOP framework for TypeScript.AWF's PowerPoint Tab: A collection of little powerpoint utilities, including "resize all shapes".Base64 Encoder-Decoder: (Base64 Encoder/Decoder using C#)BombaJob-WF: Official Windows desktop client for BombaJob.bgBungie Test: !CCAudio: A project to create an audio recording/mixing and processing framework in C#/C++ with a look to creating a Digital Audio Workstation. EvaluationSyarem: for yuanguangexporttfschangesets: Small utility that runs agains tftp.exe(tfs power tools) and exports a given range of changesets.fjfdszjtfs: fjfdszjtfsKladionica: Ovo je mala web aplikacija koja je specijalizovana za f1 kladionicu na forumu KrstaricaListViewItem Float Test: WPF testing ground for development of a "floating" listviewitem (preeettty)Macconnell: This is my test projectNWebsec Demo site: This is the NWebsec demo website project.Ocean Flattened: Summary of this projectQuagmire: QUAGMIRE aims to make distributed data processing and visualisation simple and flexible.Scheduled SQL Jobs for DotNetNuke by IowaComputerGurus Inc.: Keeping a DotNetNuke site database clean can be a real nightmare for those hosting sites on shared hosting providers.Secretary Tool: Tool for secretaries of congregations of Jehovah's Witnesses.Secure My Install for DotNetNuke by IowaComputerGurus: This module is a single-use per DotNetNuke installation utility module that will make a number of security enhancing modifications to your "out of the box" DotNServStop: ServStop is a .NET application that makes it easy to stop several system services at once. Now you don't have to change startup types or stop them one at a time. It has a simple list-based interface with the ability to save and load lists of user services to stop. Written in C#.Simple File List for DotNetNuke by IowaComputerGurus Inc.: The Simple File List module is a Free DotNetNuke module that will list all files within a specific folder under the specific portal folder within DNN for users SOLUS3 Config Discovery: An open-source community developed tool for generating a simple text file detailing your local SIMS server settings to simplify new SOLUS3 configurations.Sort Project: Project Name: Sort Project Description: This project holds a class that extends objects type of IEnumerable by enabling them using sorting algorithms other than the buil in one within the microsoft staff SQL Azure Data Protector: This tool leverages the currently available options that Azure platform has to provide an integrated and automated solution to back up the SQL Azure databases.Throttling Suite for ASP.NET Applications: The Throttling Suite provides throttling control capabilities to the ASP.NET applications. It is highly customizable; including "log-only" mode.TidyBackups: Allows for automation of deletion of Microsoft SQL backup files based on file type (.bak) creation age as well as compression using standard ZIP technology.TrainingData: TrainingData is a set of libraries for reading and modifying training data files for Garmin and Polar heart rate monitors.Virtual eCommerce: ??? ? ?????? ????????? ??????. ??????: ??????????? ?????????, ?????????? ?????????? ?? ????????????? ?? Microsoft - ASP Web Pages with Razor Engine.WebNext: My personal web page / blog with cms on asp mvc 3Windows 8 Mouse Unsticky: Makes Windows 8 top right/left hot corners unsticky.WPForms: WPForms is simple framework for Form-driven Silverlight Windows Phone applications. Using the framework allows developers to easily create and display forms.

    Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >