Search Results

Search found 34668 results on 1387 pages for 'return'.

Page 242/1387 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

  • When using procmail with maildir, it returns error with code I found

    - by bradlis7
    I'm not an expert at procmail, but I have this code: DROPPRIVS=yes DEFAULT=$HOME/Maildir/ :0 * ? /usr/bin/test -d $DEFAULT || /bin/mkdir $DEFAULT { } :0 E { # Bail out if directory could not be created EXITCODE=127 HOST=bail.out } MAILDIR=$HOME/Maildir/ But, when the directory already exists, sometimes it will send a return email with this error: 554 5.3.0 unknown mailer error 127. The email still gets delivered, mind you, but it sends back an error code. I fixed this temporarily by commenting out the EXITCODE and HOST lines, but I'd like to know if there is a better solution. I found this block of code in multiple places across the net, but couldn't really find why this error was coming back to me. It seems to happen when I send an email to a local user, sometimes the user has a .forward file to send it on to other users, sometimes not, but the result has been the same. I also tried removing DROPPRIVS, just in case it was messing up the forwarding, but it did not seem to affect it. Is the line starting with * ? /usr/bin/test a problem? The * signifies a regex, but the ? makes it return an integer value, correct? What is the integer being matched against? Or is it just comparing the integer return value? Thanks for the help.

    Read the article

  • Error with procmail script to use Maildir format

    - by bradlis7
    I have this code in /etc/procmailrc: DROPPRIVS=yes DEFAULT=$HOME/Maildir/ :0 * ? /usr/bin/test -d $DEFAULT || /bin/mkdir $DEFAULT { } :0 E { # Bail out if directory could not be created EXITCODE=127 HOST=bail.out } MAILDIR=$HOME/Maildir/ But, when the directory already exists, sometimes it will send a return email with this error: 554 5.3.0 unknown mailer error 127. The email still gets delivered, mind you, but it sends back an error code to the sending user as well. I fixed this temporarily by commenting out the EXITCODE and HOST lines, but I'd like to know if there is a better solution. I found this block of code in multiple places across the net, but couldn't really find why this error was coming back to me. It seems to happen when I send an email to a local user. Sometimes the user has a .forward file to send it on to other users, sometimes not, but the result has been the same. I also tried removing DROPPRIVS, just in case it was messing up the forwarding, but it did not seem to affect it. Is the line starting with * ? /usr/bin/test a problem? The * signifies a regex, but the ? makes it return an integer value, correct? What is the integer being matched against? Or is it just comparing the integer return value? Do I need a space between the two blocks? Thanks for the help.

    Read the article

  • What is causing Null Pointer Exception in the following code in java? [migrated]

    - by Joe
    When I run the following code I get Null Pointer Exception. I cannot figure out why that is happening. Need Help. public class LinkedList<T> { private Link head = null; private int length = 0; public T get(int index) { return find(index).item; } public void set(int index, T item) { find(index).item = item; } public int length() { return length; } public void add(T item) { Link<T> ptr = head; if (ptr == null) { // empty list so append to head head = new Link<T>(item); } else { // non-empty list, so locate last link while (ptr.next != null) { ptr = ptr.next; } ptr.next = new Link<T>(item); } length++; // update length cache } // traverse list looking for link at index private Link<T> find(int index) { Link<T> ptr = head; int i = 0; while (i++ != index) { if(ptr!=null) { ptr = ptr.next; } } return ptr; } private static class Link<S> { public S item; public Link<S> next; public Link(S item) { this.item = item; } } public static void main(String[] args) { new LinkedList<String>().get(1); } }

    Read the article

  • VNC server failed to start CentOS

    - by Shaun
    I followed a tutorial on how to install and get VNCserver to run on CentOS 6 (since freenx isnt supported yet) and I keep getting Starting VNC server: 1:user [FAILED] How do I figure out whats going on here? Im new to Linux/CentOS and im trying to get RDP going so I can step away from SSH as much as possible (you know us Windows users love our pretty GUI's). So, where is the error log at and how do I find it? Or maybe someone else has experienced this and knows the solution based on the simple error given? After running in debug mode, here is my error + . /etc/init.d/functions ++ TEXTDOMAIN=initscripts ++ umask 022 ++ PATH=/sbin:/usr/sbin:/bin:/usr/bin ++ export PATH ++ '[' -z '' ']' ++ COLUMNS=80 ++ '[' -z '' ']' +++ /sbin/consoletype ++ CONSOLETYPE=pty ++ '[' -f /etc/sysconfig/i18n -a -z '' -a -z '' ']' ++ . /etc/profile.d/lang.sh ++ unset LANGSH_SOURCED ++ '[' -z '' ']' ++ '[' -f /etc/sysconfig/init ']' ++ . /etc/sysconfig/init +++ BOOTUP=color +++ RES_COL=60 +++ MOVE_TO_COL='echo -en \033[60G' +++ SETCOLOR_SUCCESS='echo -en \033[0;32m' +++ SETCOLOR_FAILURE='echo -en \033[0;31m' +++ SETCOLOR_WARNING='echo -en \033[0;33m' +++ SETCOLOR_NORMAL='echo -en \033[0;39m' +++ PROMPT=yes +++ AUTOSWAP=no +++ ACTIVE_CONSOLES='/dev/tty[1-6]' +++ SINGLE=/sbin/sushell ++ '[' pty = serial ']' ++ __sed_discard_ignored_files='/\(~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d' + '[' -r /etc/sysconfig/vncservers ']' + . /etc/sysconfig/vncservers ++ VNCSERVERS='1:larry 2:moe 3:curly' ++ VNCSERVERARGS[1]='-geometry 800x600' ++ VNCSERVERARGS[2]='-geometry 640x480' ++ VNCSERVERARGS[3]='-geometry 640x480' + prog='VNC server' + RETVAL=0 + case "$1" in + start + '[' 0 '!=' 0 ']' + . /etc/sysconfig/network ++ NETWORKING=yes ++ HOSTNAME=vps.binaryvisionaries.com ++ DOMAINNAME=server.name ++ GATEWAYDEV=venet0 ++ NETWORKING_IPV6=yes ++ IPV6_DEFAULTDEV=venet0 + '[' yes = no ']' + '[' -x /usr/bin/vncserver ']' + '[' -x /usr/bin/Xvnc ']' + echo -n 'Starting VNC server: ' Starting VNC server: + RETVAL=0 + '[' '!' -d /tmp/.X11-unix ']' + for display in '${VNCSERVERS}' + SERVS=1 + echo -n '1:larry ' 1:larry + DISP=1 + USER=larry + VNCUSERARGS='-geometry 800x600' + runuser -l larry -c 'cd ~larry && [ -r .vnc/passwd ] && vncserver :1 -geometry 800x600' + RETVAL=1 + '[' 1 -eq 0 ']' + break + '[' -z 1 ']' + '[' 1 -eq 0 ']' + failure 'vncserver start' + local rc=1 + '[' color '!=' verbose -a -z '' ']' + echo_failure + '[' color = color ']' + echo -en '\033[60G' + echo -n '[' [+ '[' color = color ']' + echo -en '\033[0;31m' + echo -n FAILED FAILED+ '[' color = color ']' + echo -en '\033[0;39m' + echo -n ']' ]+ echo -ne '\r' + return 1 + '[' -x /usr/bin/plymouth ']' + /usr/bin/plymouth --details + return 1 + echo + '[' 1 -eq 98 ']' + return 1 + exit 1

    Read the article

  • MySQL Error: FUNCTION LEVENSHTEIN already exists

    - by kgrote
    I've got an ExpressionEngine database and I exported a couple of tables from it, then dropped those tables. When I try to re-import the tables in PHPMyAdmin, I get this error: SQL query: -- -- Database: `my_db` -- DELIMITER $$ -- -- Functions -- CREATE DEFINER=`my_username`@`%` FUNCTION `LEVENSHTEIN`(s1 VARCHAR(255), s2 VARCHAR(255)) RETURNS int(11) DETERMINISTIC BEGIN DECLARE s1_len, s2_len, i, j, c, c_temp, cost INT; DECLARE s1_char CHAR; DECLARE cv0, cv1 VARBINARY(256); SET s1_len = CHAR_LENGTH(s1), s2_len = CHAR_LENGTH(s2), cv1 = 0x00, j = 1, i = 1, c = 0; IF s1 = s2 THEN RETURN 0; ELSEIF s1_len = 0 THEN RETURN s2_len; ELSEIF s2_len = 0 THEN RETURN s1_len; ELSE WHILE j <= s2_len DO SET cv1 = CONCAT(cv1, UNHEX(HEX(j))), j = j + 1; END WHILE; WHILE i <= s1_len DO SET s1_char = SUBSTRING(s1, i, 1), c = i, cv0 = UNHEX(HEX(i)), j = 1; WHILE j <= s2_len DO SET c = c + 1; IF s1_char = SUBSTRING(s2, j, 1) THEN SET cost = 0; ELSE SET cost = 1; END IF; SET c_temp = CONV(HEX(SUBSTRING(cv1, j, 1)), 16, 10) + cost; IF c > c_temp THEN SET c = [...] MySQL said: Documentation #1304 - FUNCTION LEVENSHTEIN already exists I get this error even if I drop all tables from the DB and try to import anything. The only way I can get the error to go away is to totally delete the database and re-create it. What's causing that error and how can I stop it from happening?

    Read the article

  • How can I set the CD audio volume in Linux?

    - by user1296362
    In Windows 7 Control Panel - Sound - Sound Properties window there's an slider for setting CD Audio volume: And it's pretty strange that I can't find corresponding one in generic Linux mixers: alsamixer or amixer. I connected a CD drive to try to set CD audio volume with cdcd (CD Player): $ cdcd setvol 0 Invalid volume It isn't actually an invalid volume, it is because ioctl() call fails. I found that out after searching and changing a bit the source code of this utility (in the libcdaudio): --- cdaudio.c.orig 2004-09-09 06:26:20.000000000 +0600 +++ cdaudio.c 2012-05-30 21:34:34.167915521 +0600 @@ -578,8 +578,10 @@ cdvol_data.CDVOLCTRL_BACK_RIGHT_SELECT = CDAUDIO_MAX_VOLUME; #endif - if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) - return -1; + if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) { + printf("*** cd_set_volume: ioctl() returned error\n"); + return -1; + } return 0; } By the way cdcd's get volume command yields rather weird output: Left Right Front 1281734864 32767 Back 0 0 Also I tried aumix: $ aumix -c 0 But all with no success. I read from this manual — http://tldp.org/HOWTO/Alsa-sound-6.html (section 6.2 The mixer) that CD channel can present in amixer output. Maybe some drivers for sound card are missing in my Ubuntu 12.04 LTS installation. Though I don't think it's the case: $ lsmod | grep snd snd_mixer_oss 22602 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 snd_hda_intel 33773 4 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 19 snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep ,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm All I need is just mute or set to 0 volume level of CD Audio channel, like I did in Windows 7, to get rid of sibilant noise in the speakers.

    Read the article

  • Terminate child processes on ctrl-c

    - by jackweirdy
    In tiny core linux, I have the following script: #!/bin/sh # ~/.X.d/freerdp.sh rdp(){ while true do xfreerdp -f [IP Address] done } rdp & It's pretty simple; when X starts up and checks the .X.d directory (as is the case in tiny core) it finds and executes this script. The script starts up freerdp and keeps a connection open to the server by restarting it whenever it closes. As you can see from the rdp & line, the function is run in the background to allow X to continue its startup routine. The problem is that whenever I cancel X with a Ctrl-Alt-Backspace the rdp process doesn't die. I'm looking for a way to kill the process as soon as X finishes, either through: A) a script, executed on X closing, which kills the process or B) by modifying the script to check the return value of the xfreerdp command. NB - if the solution does check the return value, it must only end if the command fails to open the X display. For that reason, if you could point me to a reference for xfreerdp return values I'd be grateful.

    Read the article

  • Difference between CurrentClockSpeed and MaxClockSpeed

    - by Ben
    Rationale this belongs on ServerFault rather than StackOverflow - I already have my program which gets the value, I am querying the value returned and what it means. I have an in-house program which audits our company PCs, and one of the things it checks is the speed of the processor. To do this, it queries the Win32_Processor WMI class and gets the value of CurrentClockSpeed. We were playing with the data today and found an anomaly with some of the speeds being reported incorrectly (for example, CurrentClockSpeed said 1.0GHz, whereas the CPU name said Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz [Confirmed it is in fact 1.83GHz]). I did a bit of digging on the internet and found this blog post which might explain what is going on. My initial thought was that I could change the program to instead get the value for MaxClockSpeed instead of CurrentClockSpeed, but Microsoft's documentation doesn't clearly define what this will return. What I mean by that is will this return a value which is its actual maximum speed (say if it were overclocked) but which it would not normally be running at, or would it return what I expect, which is its maximum speed under normal (not overclocked) conditions?

    Read the article

  • Apache can't get viewed from outside of my LAN

    - by Javier Martinez
    I fixed it in PORTS TRIGGER menu of my router. Thanks you anyway I have a weird problem related with (i think) my cable-router and my configured vhosts in Apache2. The point is I can't access from outside of my LAN to any of my configured vhosts if I set the http port of Apache to 80 and i add a NAT rule for it. Otherwise, if I set my Apache port to 81 (or any else) with its respective NAT rule on my router it works. My router is an ARRIS TG952S and I am using Apache/2.2.22 (Debian) ports.conf NameVirtualHost *:80 Listen 80 vhost1.mydomain.net.conf <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName vhost1.mydomain.net ServerAlias vhost1.mydomain.net www.vhost1.mydomain.net vhost2.mydomain.net.conf <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName vhost2.mydomain.net ServerAlias vhost2.mydomain.net www.vhost2.mydomain.net DNS records (using FreeDNS) are: mydomain.net --> pointing to another server vhost1.mydomain.net --> pointing to my server vhost2.mydomain.net --> pointing to my server iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-apache-noscript tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 80,443 fail2ban-apache tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 80,443 fail2ban-ssh tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 22 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-apache (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-apache-noscript (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Thanks you

    Read the article

  • Protect all XML-RPC calls with HTTP basic auth but one

    - by bodom_lx
    I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

    Read the article

  • Protect all XML-RPC calls with HTTP basic auth but one

    - by bodom_lx
    I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

    Read the article

  • Windows 8 Internet Explorer 11 proxy automation script

    - by Stefan Bollmann
    Similar to this post, I'd like to change my proxy settings using a script. However, it fails. When I am behind the proxy, IE does not connect to the internet. Here I try the first solution from craig: function FindProxyForURL(url, host) { if (isInNet(myIpAddress(), "myactualip", "myactualsubnetip")) return "PROXY proxyasshowninpicture:portihavetouseforthisproxy_see_picture"; else return "DIRECT"; } This script is saved as proxy.pac in c:\windows and my configuration is* in LAN settings: No automatically detected settings, yes, use automatic config script: file://c:/windows/proxy.pac No proxy server. So, what am I doing wrong? ---------------- update -------------- However, when I set up a proxy in my LAN configurations: IE -> Internet Options -> Connections -> LAN Settings check: Use a proxy Server for your LAN Address: <a pingable proxy> Port: <portnr> everything is fine for this environment. Now I try a simpler script like function FindProxyForURL(url, host) { return "PROXY <pingable proxy>:<portnr>; DIRECT"; } With a configuration described above** I am not able to get through the proxy.

    Read the article

  • How to Set Up an SMTP Submission Server on Linux

    - by Kevin Cox
    I was trying to set up a mail server with no luck. I want it to accept mail from authenticated users only and deliver them. I want the users to be able to connect over the internet. Ideally the mail server wouldn't accept any incoming mail. Essentially I want it to accept messages on a receiving port and transfer them to the intended recipient out port 25. If anyone has some good links and guides that would be awesome. I am quite familiar with linux but have never played around with MTA's and am currently running debian 6. More Specific Problem! Sorry, that was general and postfix is complex. I am having trouble enabling the submission port with encryption and authentication. What Works: Sending mail from the local machine. (sendmail [email protected]). Ports are open. (25 and 587) Connecting to 587 appears to work, I get a "need to starttls" warning and starttls appears to work. But when I try to connect with the next command I get the error below. # openssl s_client -connect localhost:587 -starttls smtp CONNECTED(00000003) depth=0 /CN=localhost.localdomain verify error:num=18:self signed certificate verify return:1 depth=0 /CN=localhost.localdomain verify return:1 --- Certificate chain 0 s:/CN=localhost.localdomain i:/CN=localhost.localdomain --- Server certificate -----BEGIN CERTIFICATE----- MIICvDCCAaQCCQCYHnCzLRUoMTANBgkqhkiG9w0BAQUFADAgMR4wHAYDVQQDExVs b2NhbGhvc3QubG9jYWxkb21haW4wHhcNMTIwMjE3MTMxOTA1WhcNMjIwMjE0MTMx OTA1WjAgMR4wHAYDVQQDExVsb2NhbGhvc3QubG9jYWxkb21haW4wggEiMA0GCSqG SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDEFA/S6VhJihP6OGYrhEtL+SchWxPZGbgb VkgNJ6xK2dhR7hZXKcDtNddL3uf1YYWF76efS5oJPPjLb33NbHBb9imuD8PoynXN isz1oQEbzPE/07VC4srbsNIN92lldbRruDfjDrAbC/H+FBSUA2ImHvzc3xhIjdsb AbHasG1XBm8SkYULVedaD7I7YbnloCx0sTQgCM0Vjx29TXxPrpkcl6usjcQfZHqY ozg8X48Xm7F9CDip35Q+WwfZ6AcEkq9rJUOoZWrLWVcKusuYPCtUb6MdsZEH13IQ rA0+x8fUI3S0fW5xWWG0b4c5IxuM+eXz05DvB7mLyd+2+RwDAx2LAgMBAAEwDQYJ KoZIhvcNAQEFBQADggEBAAj1ib4lX28FhYdWv/RsHoGGFqf933SDipffBPM6Wlr0 jUn7wler7ilP65WVlTxDW+8PhdBmOrLUr0DO470AAS5uUOjdsPgGO+7VE/4/BN+/ naXVDzIcwyaiLbODIdG2s363V7gzibIuKUqOJ7oRLkwtxubt4D0CQN/7GNFY8cL2 in6FrYGDMNY+ve1tqPkukqQnes3DCeEo0+2KMGuwaJRQK3Es9WHotyrjrecPY170 dhDiLz4XaHU7xZwArAhMq/fay87liHvXR860tWq30oSb5DHQf4EloCQK4eJZQtFT B3xUDu7eFuCeXxjm4294YIPoWl5pbrP9vzLYAH+8ufE= -----END CERTIFICATE----- subject=/CN=localhost.localdomain issuer=/CN=localhost.localdomain --- No client certificate CA names sent --- SSL handshake has read 1605 bytes and written 354 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: E07926641A5EF22B15EB1D0E03FFF75588AB6464702CF4DC2166FFDAC1CA73E2 Session-ID-ctx: Master-Key: 454E8D5D40380DB3A73336775D6911B3DA289E4A1C9587DDC168EC09C2C3457CB30321E44CAD6AE65A66BAE9F33959A9 Key-Arg : None Start Time: 1349059796 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN read:errno=0 If I try to connect from evolution I get the following error: The reported error was "HELO command failed: TCP connection reset by peer".

    Read the article

  • EXTJS 3.2.1 EditorGridPanel - ComboBox with jsonstore

    - by Yoong Kim
    Hi, I am using EXTJS with an editorgridpanel and I am trying to to insert a combobox, populated with JsonStore. Here is a snapshot of my code: THE STORE: kmxgz.ordercmpappro.prototype.getCmpapproStore = function(my_url) { var myStore = new Ext.data.Store({ proxy: new Ext.data.HttpProxy({ url: my_url , method: 'POST' }) , reader: new Ext.data.JsonReader({ root: 'rows', totalProperty: 'total', id: 'list_cmpappro_id', fields: [ {name: 'list_cmpappro_id', mapping: 'list_cmpappro_id'} , {name: 'list_cmpappro_name', mapping: 'list_cmpappro_name'} ] }) , autoLoad: true , id: 'cmpapproStore' , listeners: { load: function(store, records, options){ //store is loaded, now you can work with it's records, etc. console.info('store load, arguments:', arguments); console.info('Store count = ', store.getCount()); } } }); return myStore; }; THE COMBO: kmxgz.ordercmpappro.prototype.getCmpapproCombo = function(my_store) { var myCombo = new Ext.form.ComboBox({ typeAhead: true, lazyRender:false, forceSelection: true, allowBlank: true, editable: true, selectOnFocus: true, id: 'cmpapproCombo', triggerAction: 'all', fieldLabel: 'CMP Appro', valueField: 'list_cmpappro_id', displayField: 'list_cmpappro_name', hiddenName: 'cmpappro_id', valueNotFoundText: 'Value not found.', mode: 'local', store: my_store, emptyText: 'Select a CMP Appro', loadingText: 'Veuillez patienter ...', listeners: { // 'change' will be fired when the value has changed and the user exits the ComboBox via tab, click, etc. // The 'newValue' and 'oldValue' params will be from the field specified in the 'valueField' config above. change: function(combo, newValue, oldValue){ console.log("Old Value: " + oldValue); console.log("New Value: " + newValue); }, // 'select' will be fired as soon as an item in the ComboBox is selected with mouse, keyboard. select: function(combo, record, index){ console.log(record.data.name); console.log(index); } } }); return myCombo; }; The combobox is inserted in an editorgridpanel. There's a renderer like this: Ext.util.Format.comboRenderer = function(combo){ return function(value, metadata, record){ alert(combo.store.getCount()); <== always 0!! var record = combo.findRecord(combo.valueField || combo.displayField, value); return record ? record.get(combo.displayField) : combo.valueNotFoundText; } }; When the grid is displayed the first time, instead of have the displayField, I have : "Value not found." And I have the alert : 0 (alert(combo.store.getCount())) from the renderer. But I can see in the console that the data have been correctly loaded! Even if I try to reload the store from the renderer (combo.store.load();), I still have the alert (0)! But when I select the combo to change the value, I can see the data and when I change the value, I can see the displayFiel! I don't understand what's the problem? Since now several days, I already tried all the solutions I found...but still nothing! Any advice is welcome! Yoong

    Read the article

  • my asp.net mvc 2.0 application fails with error "No parameterless constructor defined for this objec

    - by loviji
    Hello, i'm new in asp.net mvc 2. I'm trying to list all data from one table(ms sql server table). as ORM I use Entity Framework. now, I'm tried to write something to do this: Model: private uqsEntities _uqsEntity; public permissionRepository(uqsEntities uqsEntity) { _uqsEntity = uqsEntity; } public IEnumerable<userPermissions> getAllData() { return _uqsEntity.userPermissions; } controller: private DataManager _dataManager; public ManagePermissionsController(DataManager datamanager) { _dataManager = datamanager; } public ActionResult Index() { return RedirectToAction("List"); } [AcceptVerbs(HttpVerbs.Get)] public ActionResult List() { return List(null); } [AcceptVerbs(HttpVerbs.Post)] public ActionResult List(int? userID) { return View(_dataManager.Permission.getAllData().ToList()); } Route: routes.MapRoute( "ManagePerm", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "ManagePermissions", action = "Index"}, new string[] { "uqs.Controllers" } // Parameter defaults ); and View automatically generated by Visual Studio(in action mouse right-click). when I run app. , my app. fails. No parameterless constructor defined for this object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.MissingMethodException: No parameterless constructor defined for this object. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [MissingMethodException: No parameterless constructor defined for this object.] System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck) +0 System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache) +86 System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache) +230 System.Activator.CreateInstance(Type type, Boolean nonPublic) +67 System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) +80 [InvalidOperationException: An error occurred when trying to create a controller of type 'uqs.Controllers.ManagePermissionsController'. Make sure that the controller has a parameterless public constructor.] System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) +190 System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) +68 System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) +118 System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) +46 System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContext httpContext, AsyncCallback callback, Object state) +63 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +13 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8679186 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 please, somebody, help me to catch problem.

    Read the article

  • Make @JsonTypeInfo property optional

    - by Mark Peters
    I'm using @JsonTypeInfo to instruct Jackson to look in the @class property for concrete type information. However, sometimes I don't want to have to specify @class, particularly when the subtype can be inferred given the context. What's the best way to do that? Here's an example of the JSON: { "owner": {"name":"Dave"}, "residents":[ {"@class":"jacksonquestion.Dog","breed":"Greyhound"}, {"@class":"jacksonquestion.Human","name":"Cheryl"}, {"@class":"jacksonquestion.Human","name":"Timothy"} ] } and I'm trying to deserialize them into these classes (all in jacksonquestion.*): public class Household { private Human owner; private List<Animal> residents; public Human getOwner() { return owner; } public void setOwner(Human owner) { this.owner = owner; } public List<Animal> getResidents() { return residents; } public void setResidents(List<Animal> residents) { this.residents = residents; } } public class Animal {} public class Dog extends Animal { private String breed; public String getBreed() { return breed; } public void setBreed(String breed) { this.breed = breed; } } public class Human extends Animal { private String name; public String getName() { return name; } public void setName(String name) { this.name = name; } } using this config: @JsonTypeInfo(use = JsonTypeInfo.Id.CLASS, include = JsonTypeInfo.As.PROPERTY, property = "@class") private static class AnimalMixin { } //... ObjectMapper objectMapper = new ObjectMapper(); objectMapper.getDeserializationConfig().addMixInAnnotations(Animal.class, AnimalMixin.class); Household household = objectMapper.readValue(json, Household.class); System.out.println(household); As you can see, the owner is declared as a Human, not an Animal, so I want to be able to omit @class and have Jackson infer the type as it normally would. When I run this though, I get org.codehaus.jackson.map.JsonMappingException: Unexpected token (END_OBJECT), expected FIELD_NAME: missing property '@class' that is to contain type id (for class jacksonquestion.Human) Since "owner" doesn't specify @class. Any ideas? One initial thought I had was to use @JsonTypeInfo on the property rather than the type. However, this cannot be leveraged to annotate the element type of a list.

    Read the article

  • Implementation of ZipCrypto / Zip 2.0 encryption in java

    - by gomesla
    I'm trying o implement the zipcrypto / zip 2.0 encryption algoritm to deal with encrypted zip files as discussed in http://www.pkware.com/documents/casestudies/APPNOTE.TXT I believe I've followed the specs but just can't seem to get it working. I'm fairly sure the issue has to do with my interpretation of the crc algorithm. The documentation states CRC-32: (4 bytes) The CRC-32 algorithm was generously contributed by David Schwaderer and can be found in his excellent book "C Programmers Guide to NetBIOS" published by Howard W. Sams & Co. Inc. The 'magic number' for the CRC is 0xdebb20e3. The proper CRC pre and post conditioning is used, meaning that the CRC register is pre-conditioned with all ones (a starting value of 0xffffffff) and the value is post-conditioned by taking the one's complement of the CRC residual. Here is the snippet that I'm using for the crc32 public class PKZIPCRC32 { private static final int CRC32_POLYNOMIAL = 0xdebb20e3; private int crc = 0xffffffff; private int CRCTable[]; public PKZIPCRC32() { buildCRCTable(); } private void buildCRCTable() { int i, j; CRCTable = new int[256]; for (i = 0; i <= 255; i++) { crc = i; for (j = 8; j > 0; j--) if ((crc & 1) == 1) crc = (crc >>> 1) ^ CRC32_POLYNOMIAL; else crc >>>= 1; CRCTable[i] = crc; } } private int crc32(byte buffer[], int start, int count, int lastcrc) { int temp1, temp2; int i = start; crc = lastcrc; while (count-- != 0) { temp1 = crc >>> 8; temp2 = CRCTable[(crc ^ buffer[i++]) & 0xFF]; crc = temp1 ^ temp2; } return crc; } public int crc32(int crc, byte buffer) { return crc32(new byte[] { buffer }, 0, 1, crc); } } Below is my complete code. Can anyone see what I'm doing wrong. package org.apache.commons.compress.archivers.zip; import java.io.IOException; import java.io.InputStream; public class ZipCryptoInputStream extends InputStream { public class PKZIPCRC32 { private static final int CRC32_POLYNOMIAL = 0xdebb20e3; private int crc = 0xffffffff; private int CRCTable[]; public PKZIPCRC32() { buildCRCTable(); } private void buildCRCTable() { int i, j; CRCTable = new int[256]; for (i = 0; i <= 255; i++) { crc = i; for (j = 8; j > 0; j--) if ((crc & 1) == 1) crc = (crc >>> 1) ^ CRC32_POLYNOMIAL; else crc >>>= 1; CRCTable[i] = crc; } } private int crc32(byte buffer[], int start, int count, int lastcrc) { int temp1, temp2; int i = start; crc = lastcrc; while (count-- != 0) { temp1 = crc >>> 8; temp2 = CRCTable[(crc ^ buffer[i++]) & 0xFF]; crc = temp1 ^ temp2; } return crc; } public int crc32(int crc, byte buffer) { return crc32(new byte[] { buffer }, 0, 1, crc); } } private static final long ENCRYPTION_KEY_1 = 0x12345678; private static final long ENCRYPTION_KEY_2 = 0x23456789; private static final long ENCRYPTION_KEY_3 = 0x34567890; private InputStream baseInputStream = null; private final PKZIPCRC32 checksumEngine = new PKZIPCRC32(); private long[] keys = null; public ZipCryptoInputStream(ZipArchiveEntry zipEntry, InputStream inputStream, String passwd) throws Exception { baseInputStream = inputStream; // Decryption // ---------- // PKZIP encrypts the compressed data stream. Encrypted files must // be decrypted before they can be extracted. // // Each encrypted file has an extra 12 bytes stored at the start of // the data area defining the encryption header for that file. The // encryption header is originally set to random values, and then // itself encrypted, using three, 32-bit keys. The key values are // initialized using the supplied encryption password. After each byte // is encrypted, the keys are then updated using pseudo-random number // generation techniques in combination with the same CRC-32 algorithm // used in PKZIP and described elsewhere in this document. // // The following is the basic steps required to decrypt a file: // // 1) Initialize the three 32-bit keys with the password. // 2) Read and decrypt the 12-byte encryption header, further // initializing the encryption keys. // 3) Read and decrypt the compressed data stream using the // encryption keys. // Step 1 - Initializing the encryption keys // ----------------------------------------- // // Key(0) <- 305419896 // Key(1) <- 591751049 // Key(2) <- 878082192 // // loop for i <- 0 to length(password)-1 // update_keys(password(i)) // end loop // // Where update_keys() is defined as: // // update_keys(char): // Key(0) <- crc32(key(0),char) // Key(1) <- Key(1) + (Key(0) & 000000ffH) // Key(1) <- Key(1) * 134775813 + 1 // Key(2) <- crc32(key(2),key(1) >> 24) // end update_keys // // Where crc32(old_crc,char) is a routine that given a CRC value and a // character, returns an updated CRC value after applying the CRC-32 // algorithm described elsewhere in this document. keys = new long[] { ENCRYPTION_KEY_1, ENCRYPTION_KEY_2, ENCRYPTION_KEY_3 }; for (int i = 0; i < passwd.length(); ++i) { update_keys((byte) passwd.charAt(i)); } // Step 2 - Decrypting the encryption header // ----------------------------------------- // // The purpose of this step is to further initialize the encryption // keys, based on random data, to render a plaintext attack on the // data ineffective. // // Read the 12-byte encryption header into Buffer, in locations // Buffer(0) thru Buffer(11). // // loop for i <- 0 to 11 // C <- buffer(i) ^ decrypt_byte() // update_keys(C) // buffer(i) <- C // end loop // // Where decrypt_byte() is defined as: // // unsigned char decrypt_byte() // local unsigned short temp // temp <- Key(2) | 2 // decrypt_byte <- (temp * (temp ^ 1)) >> 8 // end decrypt_byte // // After the header is decrypted, the last 1 or 2 bytes in Buffer // should be the high-order word/byte of the CRC for the file being // decrypted, stored in Intel low-byte/high-byte order. Versions of // PKZIP prior to 2.0 used a 2 byte CRC check; a 1 byte CRC check is // used on versions after 2.0. This can be used to test if the password // supplied is correct or not. byte[] encryptionHeader = new byte[12]; baseInputStream.read(encryptionHeader); for (int i = 0; i < encryptionHeader.length; i++) { encryptionHeader[i] ^= decrypt_byte(); update_keys(encryptionHeader[i]); } } protected byte decrypt_byte() { byte temp = (byte) (keys[2] | 2); return (byte) ((temp * (temp ^ 1)) >> 8); } @Override public int read() throws IOException { // // Step 3 - Decrypting the compressed data stream // ---------------------------------------------- // // The compressed data stream can be decrypted as follows: // // loop until done // read a character into C // Temp <- C ^ decrypt_byte() // update_keys(temp) // output Temp // end loop int read = baseInputStream.read(); read ^= decrypt_byte(); update_keys((byte) read); return read; } private final void update_keys(byte ch) { keys[0] = checksumEngine.crc32((int) keys[0], ch); keys[1] = keys[1] + (byte) keys[0]; keys[1] = keys[1] * 134775813 + 1; keys[2] = checksumEngine.crc32((int) keys[2], (byte) (keys[1] >> 24)); } }

    Read the article

  • Hibernate Exception, what wrong ? [[Exception in thread "main" org.hibernate.InvalidMappingException

    - by user195970
    I use netbean 6.7.1 to write "hello world" witch hibernate, but I get some errors, plz help me, thank you very much. my exception init: deps-module-jar: deps-ear-jar: deps-jar: Copying 1 file to F:\Documents and Settings\My Dropbox\DropboxNetBeanProjects\loginspring\build\web\WEB-INF\classes compile-single: run-main: Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Environment <clinit> INFO: Hibernate 3.2.5 Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Environment <clinit> INFO: hibernate.properties not found Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Environment buildBytecodeProvider INFO: Bytecode provider name : cglib Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Environment <clinit> INFO: using JDK 1.4 java.sql.Timestamp handling Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Configuration configure INFO: configuring from resource: /hibernate.cfg.xml Oct 25, 2009 2:44:05 AM org.hibernate.cfg.Configuration getConfigurationInputStream INFO: Configuration resource: /hibernate.cfg.xml Oct 25, 2009 2:44:06 AM org.hibernate.cfg.Configuration addResource INFO: Reading mappings from resource : hibernate/Tbluser.hbm.xml Oct 25, 2009 2:44:06 AM org.hibernate.util.XMLHelper$ErrorLogger error SEVERE: Error parsing XML: XML InputStream(1) Document is invalid: no grammar found. Oct 25, 2009 2:44:06 AM org.hibernate.util.XMLHelper$ErrorLogger error SEVERE: Error parsing XML: XML InputStream(1) Document root element "hibernate-mapping", must match DOCTYPE root "null". Exception in thread "main" org.hibernate.InvalidMappingException: Could not parse mapping document from resource hibernate/Tbluser.hbm.xml at org.hibernate.cfg.Configuration.addResource(Configuration.java:569) at org.hibernate.cfg.Configuration.parseMappingElement(Configuration.java:1587) at org.hibernate.cfg.Configuration.parseSessionFactory(Configuration.java:1555) at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1534) at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1508) at org.hibernate.cfg.Configuration.configure(Configuration.java:1428) at org.hibernate.cfg.Configuration.configure(Configuration.java:1414) at hibernate.CreateTest.main(CreateTest.java:22) Caused by: org.hibernate.InvalidMappingException: Could not parse mapping document from invalid mapping at org.hibernate.cfg.Configuration.addInputStream(Configuration.java:502) at org.hibernate.cfg.Configuration.addResource(Configuration.java:566) ... 7 more Caused by: org.xml.sax.SAXParseException: Document is invalid: no grammar found. at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195) at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.java:131) at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:384) at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:318) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(XMLNSDocumentScannerImpl.java:250) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDriver.scanRootElementHook(XMLNSDocumentScannerImpl.java:626) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:3095) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(XMLDocumentScannerImpl.java:921) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:510) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522) at org.dom4j.io.SAXReader.read(SAXReader.java:465) at org.hibernate.cfg.Configuration.addInputStream(Configuration.java:499) ... 8 more Java Result: 1 BUILD SUCCESSFUL (total time: 1 second) hibernate.cfg.xml <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE hibernate-configuration PUBLIC "-//Hibernate/Hibernate Configuration DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd"> <hibernate-configuration> <session-factory> <property name="hibernate.dialect">org.hibernate.dialect.MySQLDialect</property> <property name="hibernate.connection.driver_class">com.mysql.jdbc.Driver</property> <property name="hibernate.connection.url">jdbc:mysql://localhost:3306/hibernate</property> <property name="hibernate.connection.username">root</property> </session-factory> </hibernate-configuration> Tbluser.hbm.xml <?xml version="1.0"?> <!DOCTYPE hibernate-mapping PUBLIC "-//Hibernate/Hibernate Mapping DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-mapping-3.0.dtd"> <!-- Generated Oct 25, 2009 2:37:30 AM by Hibernate Tools 3.2.1.GA --> <hibernate-mapping> <class name="hibernate.Tbluser" table="tbluser" catalog="hibernate"> <id name="userId" type="java.lang.Integer"> <column name="userID" /> <generator class="identity" /> </id> <property name="username" type="string"> <column name="username" length="50" /> </property> <property name="password" type="string"> <column name="password" length="50" /> </property> <property name="email" type="string"> <column name="email" length="50" /> </property> <property name="phone" type="string"> <column name="phone" length="50" /> </property> <property name="groupId" type="java.lang.Integer"> <column name="groupID" /> </property> </class> </hibernate-mapping> Tbluser.java package hibernate; // Generated Oct 25, 2009 2:37:30 AM by Hibernate Tools 3.2.1.GA /** * Tbluser generated by hbm2java */ public class Tbluser implements java.io.Serializable { private Integer userId; private String username; private String password; private String email; private String phone; private Integer groupId; public Tbluser() { } public Tbluser(String username, String password, String email, String phone, Integer groupId) { this.username = username; this.password = password; this.email = email; this.phone = phone; this.groupId = groupId; } public Integer getUserId() { return this.userId; } public void setUserId(Integer userId) { this.userId = userId; } public String getUsername() { return this.username; } public void setUsername(String username) { this.username = username; } public String getPassword() { return this.password; } public void setPassword(String password) { this.password = password; } public String getEmail() { return this.email; } public void setEmail(String email) { this.email = email; } public String getPhone() { return this.phone; } public void setPhone(String phone) { this.phone = phone; } public Integer getGroupId() { return this.groupId; } public void setGroupId(Integer groupId) { this.groupId = groupId; } }

    Read the article

  • InternalsVisibleTo attribute and security vulnerability

    - by Sergey Litvinov
    I found one issue with InternalsVisibleTo attribute usage. The idea of InternalsVisibleTo attribute to allow some other assemblies to use internal classes\methods of this assembly. To make it work you need sign your assemblies. So, if other assemblies isn't specified in main assembly and if they have incorrect public key, then they can't use Internal members. But the issue in Reflection Emit type generation. For example, we have CorpLibrary1 assembly and it has such class: public class TestApi { internal virtual void DoSomething() { Console.WriteLine("Base DoSomething"); } public void DoApiTest() { // some internal logic // ... // call internal method DoSomething(); } } This assembly is marked with such attribute to allow another CorpLibrary2 to make inheritor for that TestAPI and override behaviour of DoSomething method. [assembly: InternalsVisibleTo("CorpLibrary2, PublicKey=0024000004800000940000000602000000240000525341310004000001000100434D9C5E1F9055BF7970B0C106AAA447271ECE0F8FC56F6AF3A906353F0B848A8346DC13C42A6530B4ED2E6CB8A1E56278E664E61C0D633A6F58643A7B8448CB0B15E31218FB8FE17F63906D3BF7E20B9D1A9F7B1C8CD11877C0AF079D454C21F24D5A85A8765395E5CC5252F0BE85CFEB65896EC69FCC75201E09795AAA07D0")] The issue is that I'm able to override this internal DoSomething method and break class logic. My steps to do it: Generate new assembly in runtime via AssemblyBuilder Get AssemblyName from CorpLibrary1 and copy PublikKey to new assembly Generate new assembly that will inherit TestApi class As PublicKey and name of generated assembly is the same as in InternalsVisibleTo, then we can generate new DoSomething method that will override internal method in TestAPI assembly Then we have another assembly that isn't related to this CorpLibrary1 and can't use internal members. We have such test code in it: class Program { static void Main(string[] args) { var builder = new FakeBuilder(InjectBadCode, "DoSomething", true); TestApi fakeType = builder.CreateFake(); fakeType.DoApiTest(); // it will display: // Inject bad code // Base DoSomething Console.ReadLine(); } public static void InjectBadCode() { Console.WriteLine("Inject bad code"); } } And this FakeBuilder class has such code: /// /// Builder that will generate inheritor for specified assembly and will overload specified internal virtual method /// /// Target type public class FakeBuilder { private readonly Action _callback; private readonly Type _targetType; private readonly string _targetMethodName; private readonly string _slotName; private readonly bool _callBaseMethod; public FakeBuilder(Action callback, string targetMethodName, bool callBaseMethod) { int randomId = new Random((int)DateTime.Now.Ticks).Next(); _slotName = string.Format("FakeSlot_{0}", randomId); _callback = callback; _targetType = typeof(TFakeType); _targetMethodName = targetMethodName; _callBaseMethod = callBaseMethod; } public TFakeType CreateFake() { // as CorpLibrary1 can't use code from unreferences assemblies, we need to store this Action somewhere. // And Thread is not bad place for that. It's not the best place as it won't work in multithread application, but it's just a sample LocalDataStoreSlot slot = Thread.AllocateNamedDataSlot(_slotName); Thread.SetData(slot, _callback); // then we generate new assembly with the same nameand public key as target assembly trusts by InternalsVisibleTo attribute var newTypeName = _targetType.Name + "Fake"; var targetAssembly = Assembly.GetAssembly(_targetType); AssemblyName an = new AssemblyName(); an.Name = GetFakeAssemblyName(targetAssembly); // copying public key to new generated assembly var assemblyName = targetAssembly.GetName(); an.SetPublicKey(assemblyName.GetPublicKey()); an.SetPublicKeyToken(assemblyName.GetPublicKeyToken()); AssemblyBuilder assemblyBuilder = Thread.GetDomain().DefineDynamicAssembly(an, AssemblyBuilderAccess.RunAndSave); ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule(assemblyBuilder.GetName().Name, true); // create inheritor for specified type TypeBuilder typeBuilder = moduleBuilder.DefineType(newTypeName, TypeAttributes.Public | TypeAttributes.Class, _targetType); // LambdaExpression.CompileToMethod can be used only with static methods, so we need to create another method that will call our Inject method // we can do the same via ILGenerator, but expression trees are more easy to use MethodInfo methodInfo = CreateMethodInfo(moduleBuilder); MethodBuilder methodBuilder = typeBuilder.DefineMethod(_targetMethodName, MethodAttributes.Public | MethodAttributes.Virtual); ILGenerator ilGenerator = methodBuilder.GetILGenerator(); // call our static method that will call inject method ilGenerator.EmitCall(OpCodes.Call, methodInfo, null); // in case if we need, then we put call to base method if (_callBaseMethod) { var baseMethodInfo = _targetType.GetMethod(_targetMethodName, BindingFlags.NonPublic | BindingFlags.Instance); // place this to stack ilGenerator.Emit(OpCodes.Ldarg_0); // call the base method ilGenerator.EmitCall(OpCodes.Call, baseMethodInfo, new Type[0]); // return ilGenerator.Emit(OpCodes.Ret); } // generate type, create it and return to caller Type cheatType = typeBuilder.CreateType(); object type = Activator.CreateInstance(cheatType); return (TFakeType)type; } /// /// Get name of assembly from InternalsVisibleTo AssemblyName /// private static string GetFakeAssemblyName(Assembly assembly) { var internalsVisibleAttr = assembly.GetCustomAttributes(typeof(InternalsVisibleToAttribute), true).FirstOrDefault() as InternalsVisibleToAttribute; if (internalsVisibleAttr == null) { throw new InvalidOperationException("Assembly hasn't InternalVisibleTo attribute"); } var ind = internalsVisibleAttr.AssemblyName.IndexOf(","); var name = internalsVisibleAttr.AssemblyName.Substring(0, ind); return name; } /// /// Generate such code: /// ((Action)Thread.GetData(Thread.GetNamedDataSlot(_slotName))).Invoke(); /// private LambdaExpression MakeStaticExpressionMethod() { var allocateMethod = typeof(Thread).GetMethod("GetNamedDataSlot", BindingFlags.Static | BindingFlags.Public); var getDataMethod = typeof(Thread).GetMethod("GetData", BindingFlags.Static | BindingFlags.Public); var call = Expression.Call(allocateMethod, Expression.Constant(_slotName)); var getCall = Expression.Call(getDataMethod, call); var convCall = Expression.Convert(getCall, typeof(Action)); var invokExpr = Expression.Invoke(convCall); var lambda = Expression.Lambda(invokExpr); return lambda; } /// /// Generate static class with one static function that will execute Action from Thread NamedDataSlot /// private MethodInfo CreateMethodInfo(ModuleBuilder moduleBuilder) { var methodName = "_StaticTestMethod_" + _slotName; var className = "_StaticClass_" + _slotName; TypeBuilder typeBuilder = moduleBuilder.DefineType(className, TypeAttributes.Public | TypeAttributes.Class); MethodBuilder methodBuilder = typeBuilder.DefineMethod(methodName, MethodAttributes.Static | MethodAttributes.Public); LambdaExpression expression = MakeStaticExpressionMethod(); expression.CompileToMethod(methodBuilder); var type = typeBuilder.CreateType(); return type.GetMethod(methodName, BindingFlags.Static | BindingFlags.Public); } } remarks about sample: as we need to execute code from another assembly, CorpLibrary1 hasn't access to it, so we need to store this delegate somewhere. Just for testing I stored it in Thread NamedDataSlot. It won't work in multithreaded applications, but it's just a sample. I know that we use Reflection to get private\internal members of any class, but within reflection we can't override them. But this issue is allows anyone to override internal class\method if that assembly has InternalsVisibleTo attribute. I tested it on .Net 3.5\4 and it works for both of them. How does it possible to just copy PublicKey without private key and use it in runtime? The whole sample can be found there - https://github.com/sergey-litvinov/Tests_InternalsVisibleTo UPDATE1: That test code in Program and FakeBuilder classes hasn't access to key.sn file and that library isn't signed, so it hasn't public key at all. It just copying it from CorpLibrary1 by using Reflection.Emit

    Read the article

  • Python soap using soaplib (server) and suds (client)

    - by Celso Axelrud
    This question is related to: http://stackoverflow.com/questions/1751027/python-soap-server-client In the case of soap with python, there are recommendation to use soaplib (http://wiki.github.com/jkp/soaplib) as soap server and suds (https://fedorahosted.org/suds/) as soap client. My target is to create soap services in python that can be consumed by several clients (java, etc). I tried the HelloWorld example from soaplib (http://trac.optio.webfactional.com/wiki/HelloWorld). It works well when the client is also using soaplib. Then, I tried to use suds as client consuming the HelloWorld services and it fail. -Why this is happening? Does soaplib server has problems to consumed by different clients? Here the code for the server: from soaplib.wsgi_soap import SimpleWSGISoapApp from soaplib.service import soapmethod from soaplib.serializers.primitive import String, Integer, Arraycode class HelloWorldService(SimpleWSGISoapApp): @soapmethod(String,Integer,_returns=Array(String)) def say_hello(self,name,times): results = [] for i in range(0,times): results.append('Hello, %s'%name) return results if __name__=='__main__': from cherrypy.wsgiserver import CherryPyWSGIServer #from cherrypy._cpwsgiserver import CherryPyWSGIServer # this example uses CherryPy2.2, use cherrypy.wsgiserver.CherryPyWSGIServer for CherryPy 3.0 server = CherryPyWSGIServer(('localhost',7789),HelloWorldService()) server.start() This is the soaplib client: from soaplib.client import make_service_client from SoapServerTest_1 import HelloWorldService client = make_service_client('http://localhost:7789/',HelloWorldService()) print client.say_hello("Dave",5) Results: >>> ['Hello, Dave', 'Hello, Dave', 'Hello, Dave', 'Hello, Dave', 'Hello, Dave'] This is the suds client: from suds.client import Client url = 'http://localhost:7789/HelloWordService?wsdl' client1 = Client(url) client1.service.say_hello("Dave",5) Results: >>> Unhandled exception while debugging... Traceback (most recent call last): File "C:\Python25\Lib\site-packages\RTEP\Sequencing\SoapClientTest_1.py", line 10, in <module> client1.service.say_hello("Dave",5) File "c:\python25\lib\site-packages\suds\client.py", line 537, in __call__ return client.invoke(args, kwargs) File "c:\python25\lib\site-packages\suds\client.py", line 597, in invoke result = self.send(msg) File "c:\python25\lib\site-packages\suds\client.py", line 626, in send result = self.succeeded(binding, reply.message) File "c:\python25\lib\site-packages\suds\client.py", line 658, in succeeded r, p = binding.get_reply(self.method, reply) File "c:\python25\lib\site-packages\suds\bindings\binding.py", line 158, in get_reply result = unmarshaller.process(nodes[0], resolved) File "c:\python25\lib\site-packages\suds\umx\typed.py", line 66, in process return Core.process(self, content) File "c:\python25\lib\site-packages\suds\umx\core.py", line 48, in process return self.append(content) File "c:\python25\lib\site-packages\suds\umx\core.py", line 63, in append self.append_children(content) File "c:\python25\lib\site-packages\suds\umx\core.py", line 140, in append_children cval = self.append(cont) File "c:\python25\lib\site-packages\suds\umx\core.py", line 61, in append self.start(content) File "c:\python25\lib\site-packages\suds\umx\typed.py", line 77, in start found = self.resolver.find(content.node) File "c:\python25\lib\site-packages\suds\resolver.py", line 341, in find frame = Frame(result, resolved=known, ancestry=ancestry) File "c:\python25\lib\site-packages\suds\resolver.py", line 473, in __init__ resolved = type.resolve() File "c:\python25\lib\site-packages\suds\xsd\sxbasic.py", line 63, in resolve raise TypeNotFound(qref) TypeNotFound: Type not found: '(string, HelloWorldService.HelloWorldService, )'

    Read the article

  • override GetControllerInstance in asp.NET MVC 2

    - by loviji
    I have a code in asp.net MVC v.1: protected override IController GetControllerInstance(Type controllerType) { string connectionString = ConfigurationManager.ConnectionStrings["someEntities"].ConnectionString; return Activator.CreateInstance(controllerType, new DataManager(connectionString)) as IController; } now I use asp.net mvc v.2. And I know that, now GetController implemented as public virtual IController CreateController(RequestContext requestContext, string controllerName); How can return old functionality of upper code?

    Read the article

  • WPF ListBox not binding to INotifyCollectionChanged or INotifyPropertyChanged Events

    - by Gabe Anzelini
    I have the following test code: private class SomeItem{ public string Title{ get{ return "something"; } } public bool Completed { get { return false; } set { } } } private class SomeCollection : IEnumerable<SomeItem>, INotifyCollectionChanged { private IList<SomeItem> _items = new List<SomeItem>(); public void Add(SomeItem item) { _items.Add(item); CollectionChanged(this, new NotifyCollectionChangedEventArgs(NotifyCollectionChangedAction.Reset)); } #region IEnumerable<SomeItem> Members public IEnumerator<SomeItem> GetEnumerator() { return _items.GetEnumerator(); } #endregion #region IEnumerable Members System.Collections.IEnumerator System.Collections.IEnumerable.GetEnumerator() { return _items.GetEnumerator(); } #endregion #region INotifyCollectionChanged Members public event NotifyCollectionChangedEventHandler CollectionChanged; #endregion } private SomeCollection collection = new SomeCollection(); private void Expander_Expanded(object sender, RoutedEventArgs e) { var expander = (Expander) sender; var list = expander.DataContext as ITaskList; var listBox = (ListBox)expander.Content; //list.Tasks.CollectionChanged += CollectionChanged; collection.Add(new SomeItem()); collection.Add(new SomeItem()); listBox.ItemsSource = collection; } and the XAML the outer listbox gets populated on load. when the expander gets expanded i then set the itemssource property of the inner listbox (the reason i do this hear instead of using binding is this operation is quite slow and i only want it to take place if the use chooses to view the items). The inner listbox renders fine, but it doesn't actually subscribe to the CollectionChanged event on the collection. I have tried this with ICollection instead of IEnumerable and adding INotifyPropertyChanged as well as replacing INotifyCollectionChanged with INotifyPropertyChanged. The only way I can actually get this to work is to gut my SomeCollection class and inherit from ObservableCollection. My reasoning for trying to role my own INotifyCollectionChanged instead of using ObservableCollection is because I am wrapping a COM collection in the real code. That collection will notify on add/change/remove and I am trying to convert these to INotify events for WPF. Hope this is clear enough (its late).

    Read the article

  • GLFW 3 initialized, yet not?

    - by mSkull
    I'm struggling with creating a window with the GLFW 3 function, glfwCreateWindow. I have set an error callback function, that pretty much just prints out the error number and description, and according to that the GLFW library have not been initialized, even though the glfwInit function just returned success? Here's an outtake from my code // Error callback function prints out any errors from GFLW to the console static void error_callback( int error, const char *description ) { cout << error << '\t' << description << endl; } bool Base::Init() { // Set error callback /*! * According to the documentation this can be use before glfwInit, * and removing won't change anything anyway */ glfwSetErrorCallback( error_callback ); // Initialize GLFW /*! * This return succesfull, but... */ if( !glfwInit() ) { cout << "INITIALIZER: Failed to initialize GLFW!" << endl; return false; } else { cout << "INITIALIZER: GLFW Initialized successfully!" << endl; } // Create window /*! * When this is called, or any other glfw functions, I get a * "65537 The GLFW library is not initialized" in the console, through * the error_callback function */ window = glfwCreateWindow( 800, 600, "GLFW Window", NULL, NULL ); if( !window ) { cout << "INITIALIZER: Failed to create window!" << endl; glfwTerminate(); return false; } // Set window to current context glfwMakeContextCurrent( window ); ... return true; } And here's what's printed out in the console INITIALIZER: GLFW Initialized succesfully! 65537 The GLFW library is not initialized INITIALIZER: Failed to create window! I think I'm getting the error because of the setup isn't entirely correct, but I've done the best I can with what I could find around the place I downloaded the windows 32 from glfw.org and stuck the 2 includes files from it into minGW/include/GLFW, the 2 .a files (from the lib-mingw folder) into minGW/lib and the dll, also from the lib-mingw folder, into Windows/System32 In code::blocks I have, from build options - linker settings, linked the 2 .a files from the download. I believe I need to link more things, but I can figure out what, or where I should get those things from.

    Read the article

  • SetWindowLong in CustomDraw causes unhandled exception

    - by neeul
    Hello, I am making some changes to a CSliderCtrl using the Custom Draw, the control is to be used in a dialog. Here is the structure: In my MessageMap I have : ON_NOTIFY_REFLECT_EX(NM_CUSTOMDRAW, OnNMCustomdraw) The OnNMCustomdraw method looks like the following: BOOL CCustomSliderCtrl::OnNMCustomdraw(NMHDR *pNMHDR, LRESULT *pResult) { *pResult = CDRF_DODEFAULT; LPNMCUSTOMDRAW pNMCD = reinterpret_cast<LPNMCUSTOMDRAW>(pNMHDR); switch(pNMCD->dwDrawStage) { case CDDS_PREPAINT: { //Dialogs don't receive CDRF_NOTIFYITEMDRAW notifcations by returning it as part of pResult, we must //use the following so we ensure we receive the msg SetWindowLong(pNMHDR->hwndFrom, DWL_MSGRESULT, CDRF_NOTIFYITEMDRAW); return TRUE; } case CDDS_ITEMPREPAINT: if(pNMCD->dwItemSpec == TBCD_CHANNEL) { ...SNIP... SetWindowLong(pNMHDR->hwndFrom, DWL_MSGRESULT, CDRF_SKIPDEFAULT); return TRUE; } } return FALSE; } Reading around I learnt that you had to use SetWindowLong to set the return value for the custom draw, otherwise your method will not always receive the CDDS_ITEMPREPAINT message. However, when using SetWindowLong my application will never receive the CDDS_ITEMPREPAINT and so my slider just looks like a standard slider. The application crashes when any sort of interaction takes place upon the slider, such as hovering over it or minimizing and maximizing the dialog. I snipped the TBCD_CHANNEL code as it is never reached. When running in debug mode, it crashes at the end of the AfxUnlockGlobals method, in afxcrit.cpp. Here is a stack trace: Update: Since adding debug symbols, the crash seems to be picked up at CWnd::DefWindowProc mwthod. comctl32.dll!_TrackBarWndProc@16() + 0x551 bytes user32.dll!_InternalCallWinProc@20() + 0x28 bytes user32.dll!_UserCallWinProcCheckWow@32() + 0xb7 bytes user32.dll!_CallWindowProcAorW@24() + 0x51 bytes user32.dll!_CallWindowProcW@20() + 0x1b bytes mfc90ud.dll!CWnd::DefWindowProcW(unsigned int nMsg=15, unsigned int wParam=0, long lParam=0) Line 1043 + 0x20 bytes C++ mfc90ud.dll!CWnd::WindowProc(unsigned int message=15, unsigned int wParam=0, long lParam=0) Line 1756 + 0x1c bytes C++ mfc90ud.dll!AfxCallWndProc(CWnd * pWnd=0x0012fdbc, HWND__ * hWnd=0x000308fe, unsigned int nMsg=15, unsigned int wParam=0, long lParam=0) Line 240 + 0x1c bytes C++ mfc90ud.dll!AfxWndProc(HWND__ * hWnd=0x000308fe, unsigned int nMsg=15, unsigned int wParam=0, long lParam=0) Line 403 C++ mfc90ud.dll!AfxWndProcBase(HWND__ * hWnd=0x000308fe, unsigned int nMsg=15, unsigned int wParam=0, long lParam=0) Line 441 + 0x15 bytes C++ user32.dll!_InternalCallWinProc@20() + 0x28 bytes user32.dll!_UserCallWinProcCheckWow@32() + 0xb7 bytes user32.dll!_DispatchClientMessage@20() + 0x4d bytes user32.dll!___fnDWORD@4() + 0x24 bytes ntdll.dll!_KiUserCallbackDispatcher@12() + 0x13 bytes user32.dll!_NtUserDispatchMessage@4() + 0xc bytes user32.dll!_DispatchMessageW@4() + 0xf bytes mfc90ud.dll!AfxInternalPumpMessage() Line 183 C++ mfc90ud.dll!CWinThread::PumpMessage() Line 900 C++ mfc90ud.dll!AfxPumpMessage() Line 190 + 0xd bytes C++ mfc90ud.dll!CWnd::RunModalLoop(unsigned long dwFlags=4) Line 4386 + 0x5 bytes C++ mfc90ud.dll!CDialog::DoModal() Line 584 + 0xc bytes C++ SetSelection.exe!CSetSelectionApp::InitInstance() Line 64 + 0xb bytes C++ mfc90ud.dll!AfxWinMain(HINSTANCE__ * hInstance=0x00400000, HINSTANCE__ * hPrevInstance=0x00000000, wchar_t * lpCmdLine=0x00020a84, int nCmdShow=1) Line 37 + 0xd bytes C++ SetSelection.exe!wWinMain(HINSTANCE__ * hInstance=0x00400000, HINSTANCE__ * hPrevInstance=0x00000000, wchar_t * lpCmdLine=0x00020a84, int nCmdShow=1) Line 34 C++ SetSelection.exe!__tmainCRTStartup() Line 578 + 0x35 bytes C SetSelection.exe!wWinMainCRTStartup() Line 403 C kernel32.dll!_BaseProcessStart@4() + 0x23 bytes So, does anyone have any insight into this matter? If you need more info just let me know.

    Read the article

  • *UPDATED* help with django and accented characters?

    - by Asinox
    Hi guys, i have a problem with my accented characters, Django admin save my data without encoding to something like "&aacute;" Example: if im trying a word like " Canción ", i would like to save in this way: Canci&oacute;n, and not Canción. im usign Sociable app: {% load sociable_tags %} {% get_sociable Facebook TwitThis Google MySpace del.icio.us YahooBuzz Live as sociable_links with url=object.get_absolute_url title=object.titulo %} {% for link in sociable_links %} <a href="{{ link.link }}"><img alt="{{ link.site }}" title="{{ link.site }}" src="{{ link.image }}" /></a> {% endfor %} But im getting error if my object.titulo (title of the article) have a accented word. aught KeyError while rendering: u'\xfa' Any idea ? i had in my SETTING: DEFAULT_CHARSET = 'utf-8' i had in my mysql database: utf8_general_ci COMPLETED ERROR: Traceback: File "C:\wamp\bin\Python26\lib\site-packages\django\core\handlers\base.py" in get_response 100. response = callback(request, *callback_args, **callback_kwargs) File "C:\wamp\bin\Python26\lib\site-packages\django\views\generic\date_based.py" in object_detail 366. response = HttpResponse(t.render(c), mimetype=mimetype) File "C:\wamp\bin\Python26\lib\site-packages\django\template\__init__.py" in render 173. return self._render(context) File "C:\wamp\bin\Python26\lib\site-packages\django\template\__init__.py" in _render 167. return self.nodelist.render(context) File "C:\wamp\bin\Python26\lib\site-packages\django\template\__init__.py" in render 796. bits.append(self.render_node(node, context)) File "C:\wamp\bin\Python26\lib\site-packages\django\template\debug.py" in render_node 72. result = node.render(context) File "C:\wamp\bin\Python26\lib\site-packages\django\template\loader_tags.py" in render 125. return compiled_parent._render(context) File "C:\wamp\bin\Python26\lib\site-packages\django\template\__init__.py" in _render 167. return self.nodelist.render(context) File "C:\wamp\bin\Python26\lib\site-packages\django\template\__init__.py" in render 796. bits.append(self.render_node(node, context)) File "C:\wamp\bin\Python26\lib\site-packages\django\template\debug.py" in render_node 72. result = node.render(context) File "C:\wamp\bin\Python26\lib\site-packages\django\template\loader_tags.py" in render 62. result = block.nodelist.render(context) File "C:\wamp\bin\Python26\lib\site-packages\django\template\__init__.py" in render 796. bits.append(self.render_node(node, context)) File "C:\wamp\bin\Python26\lib\site-packages\django\template\debug.py" in render_node 72. result = node.render(context) File "C:\wamp\bin\Python26\lib\site-packages\sociable\templatetags\sociable_tags.py" in render 37. 'link': sociable.genlink(site, **self.values), File "C:\wamp\bin\Python26\lib\site-packages\sociable\sociable.py" in genlink 20. values['title'] = quote_plus(kwargs['title']) File "C:\wamp\bin\Python26\lib\urllib.py" in quote_plus 1228. s = quote(s, safe + ' ') File "C:\wamp\bin\Python26\lib\urllib.py" in quote 1222. res = map(safe_map.__getitem__, s) Exception Type: TemplateSyntaxError at /noticia/2010/jun/10/matan-domingo-paquete-en-la-avenida-san-vicente-de-paul/ Exception Value: Caught KeyError while rendering: u'\xfa' thanks, sorry with my English

    Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >