Search Results

Search found 8161 results on 327 pages for 'explicit loading'.

Page 243/327 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250 | Next Page >

Ballooning Mac OS X kernel_task and Wired memory usage. How to diagnose / fix?

- by user28930

I have a very strange issue, which I'm having a hard time diagnosing as to the root cause. I have a Mac Pro (2008, 8-core 2.8 GHz, 8800GT) with 14 GB of RAM (recently upgraded because of this issue!). When I boot my system and log in, vm_stat / top / Activity Monitor will show that kernel_task has about 150 MB allocated, and the machine has about 800 MB of Wired memory being allocated. Even initially, 800 MB seems an awful lot of wired memory to be allocated with no applications running - but, it gets worse. (NB: Wired is locked, unswappable memory) After a very short time, sometimes triggered by something as simple as launching a terminal, kernel_task will balloon to 8-900 MB of Real Mem (RSIZE), and Wired Memory will accelerate to 1.6 GB (implying that all the extra memory requests are for wired RAM in the kernel). If I quit everything (I.E: no running applications, bar an activity monitor or terminal to view top), there is no appreciable reduction in either kernel_task RSIZE, or Wired Memory usage. Going the opposite way, and loading the system with tasks also shows that wired memory does not get reduced - and that importantly it is not reduced in preference to heavy swapping. If I log out and log back in again, it reduces a bit (450 MB kernel_task, 1.28 GB Wired), but not back to the start. I'm not running any wacky kexts - and futhermore, kextstat shows no huge memory allocations there; the largest being com.apple.nvidia.nv50hal at about 4 MB of Memory. The machine feels overall more sluggish when this has happened - unsurprisingly because such a huge amount of RAM has been marked as non-pageable. So I have a few questions: 1) Is there a good way to diagnose what has allocated all of this wired memory? It's often over 2 times the kernel_task size, running no applications. The real memory total doesn't seem to add up - it seems that there is a bunch of RAM that isn't being accounted for anywhere. 2) What is happening to cause the kernel to suddenly require 6 times as much memory?

Read the article
What's hogging my CPU?

- by endolith

Ubuntu's System Monitor applet shows 100% CPU usage continuously. If I click it, the resources tab shows it at 100% continuously, too. If I go to processes, though, to find out which process is the culprit, there is nothing above 10%. If I run top there is nothing above 10%. I try killing lots of things, but it continues at 100%. How can I find out what's hogging the CPU? This is an unusual situation on a computer I use daily, that normally only hits 100% CPU when I'm doing something that requires it (like loading 32 Firefox tabs) after which it goes back to a normal idle level. It's not a new install or anything. It shouldn't be maxed out. I'm not sure when it started or if I changed something that caused it to happen. Normally I would use top or System Monitor and find the process that had gone out of control, but I can't find anything with those tools this time. It persists after reboots and everything. And the processor is obviously hot, so it's not an erroneous reading. Update: I tried killing any process I saw active again, and killing vino-server finally fixed the problem, even though it never went above 5%. I had enabled Remote Desktop a few days ago (and have obviously now disabled it). How did it manage to use 100% CPU while top only showed it as 5% or so? How do I identify the culprit in the future? Looks like I'm not the only one: Still a problem in both jaunty & karmic. Interestingly, both System Monitor & htop do not show the sum of individual processes being anywhere near 100% cpu.

Read the article
redmine gives 404 error after installation

- by Sankaranand

I am using Debian squeeze with nginx and mysql. After raking db and loading default data to redmine. When i try to visit redmine in a browser, http://ipaddress:8080/redmine, I get a 404 error Page not found The page you were trying to access doesn't exist or has been removed. My nginx configuration file, below: server { listen 8080; server_name localhost; server_name_in_redirect off; #charset koi8-r; #access_log logs/host.access.log main; location / { root html; index index.html index.htm index.php; } location ^~/phpmyadmin/ { root /usr/share/phpmyadmin; index index.php; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/$fastcgi_script_name; } location /redmine/ { root /usr/local/lib/redmine-1.2/public; access_log /usr/local/lib/redmine-1.2/log/access.log; error_log /usr/local/lib/redmine-1.2/log/error.log; passenger_enabled on; allow all; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www$fastcgi_script_name; include fastcgi_params; } location /phpMyadmin { rewrite ^/* /phpmyadmin last; } I don't know what the problem is - this is my second attempt to install redmine in Debian with nginx.

Read the article
Solaris TCP stack tuning

- by disserman

We have a large web project (about 2-3k requests per second), using haproxy (http://haproxy.1wt.eu/) as a frontend and load balancer between the java application servers. The frontend (haproxy) is running on Linux but we are going to migrate it to the Solaris 10 as all our other servers are running under Solaris. After switching a traffic I see the two things: a) the web site became loading slower (5-10 seconds with images in comparison to 2-3 seconds on Linux) b) sometimes haproxy fails to perform a "lifecheck" (get a special web page and analyze http response code) due to the socket timeout. After switching traffic back to Linux everything is okay. I've tried to tune all params I found in /dev/tcp but no progress. I believe the problem is in some open socket limitations. If someone can point me to the answer, I would be greatly appreciated. p.s. haproxy is running under Xen DomU on Linux (Kernel 2.6.18, Debian 5), under zone on Solaris (10 u8). the only thing we did on Linux is increasing of ip_conntrack_max (I believe Solaris option tcp_conn_req_max_q is the equivalent).

Read the article
Executing Oracle SQLPlus in a Powershell Invoke-Command statement against a remote machine

- by Scott Muc

We have a basic powershell script that attempts to execute SQLPlus.exe on a remote machine. The remote does not have Oracle Instant client installed, but we have bundled all the necesary dlls in a remote folder. For example we have sqlplus.exe and dependencies in the directory C:\temp\oracle. If I navigate to that path on the remote server and execute sqlplus.exe it runs just fine. I get the prompt for username. If I go: Invoke-Command -comp remote.machine.host -ScriptBlock { C:\temp\oracle\sqplus.exe } I get the following: Error 57 initializing SQL*Plus + CategoryInfo : NotSpecified: (Error 57 initializing SQL*Plus:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Error loading message shared library Thinking that it's potentially a PATH issue I tried the following: Invoke-Command -comp remote.machine.host -ScriptBlock { $env:ORACLE_HOME= "C:\temp\oracle"; $env:PATH = "$env:ORACLE_HOME; C:\temp\oracle\sqlplus.exe } This had the same result. The error code is not very helpful and is extremely frustrating since it does work when I log on to the machine. What is powershell remoting doing that's making this not work?

Read the article
SSD - Tweaks/Recommended Configuration

- by Miky D

I've just purchased my first SSD drive (a 32GB MLC from Imation) without doing enough research ahead of time in the spirit of giving the new technology a shot and getting myself up to speed by empirical research rather than reading countless reviews and I'm now at a crossroads. I've built a new server to test the new drive and at first I wanted to test it with Windows Server 2003 R2 x86 but after I loaded the OS on it and it had problems loading the drivers of the motherboard I went to the internet and did more research and the more I read the more I got confused. Finally I decided to try out Windows Server 2008 R2 x64 since it supposedly has certain support for SSD drives inherent in the NT 6.1 core. Indeed I've had much better luck with the new OS and got all the drivers installed but now I still have some questions: Should I set the drive to: IDE Emulation or AHCI in the BIOS? Should I make any other changes in the BIOS (I've read on the internet that Write Through should be changed to Write Back) Should I make any other adjustments in Windows (i.e. Tweaks such as disabling prefetching or disabling the Last Accessed Timestamp on the filesystem) and if so, is there a good/reliable online resource with instructions? I'm so tired of reading through countless online posts which spend 80% of coverage on the history of SSDs and benchmarks and explanations of how SSDs work. I got that, now I'd like to know if there's anything I should actually do to make sure Windows Server 2008 R2 makes good use of the SSD.

Read the article
Video card not detected on Lenovo T410 in Linux

- by wich

I have a T410 with an nVidia NVS 3100M, this is not a hybrid system, there is no Optimus. (No option in the BIOS for Optimus, lspci in linux as well as the Windows device manager only show the nVidia) Using lspci I see the GPU as a present device, however, I can not, for the life of me, get any video driver to work that will let me start an X session, every time X craps out with the error (EE) No devices detected. I have tried the nVidia binary blob, (with nvidia-config, made sure no nvidia support in the kernel), I have tried nouveau, I have tried nv, I have even tried generic vesa, nothing will work. When I compare the dmesg that I get when loading the nvidia kernel module, I see that it is missing some lines compared with another system that also has an nvidia card, specifically the line mentioning the GPU name (3100M) is not there. I have checked every option in the BIOS, there is nothing to control except for the BIOS video output port, which is set to the LCD panel. I have no idea anymore what the problem may be, or even how I can diagnose this problem further. Any help will be appreciated.

Read the article
centos 6 debuginfo repository does not have httpd debug version available

- by Zippy Zeppoli

I am trying to get the debug version of httpd so I can use it in conjunction with gdb. I am having a hard time getting them, and they don't seem to be in the standard epel-debuginfo repository. What should I do? > [root@buildbox-rhel6 ~]# debuginfo-install httpd Loaded plugins: fastestmirror, presto enabling epel-debuginfo Loading mirror speeds from cached hostfile epel-debuginfo/metalink | 8.3 kB 00:00 * base: mirrors.cicku.me * epel: mirrors.kernel.org * epel-debuginfo: mirrors.kernel.org * extras: mirrors.arpnetworks.com * updates: linux.mirrors.es.net epel-debuginfo | 3.1 kB 00:00 epel-debuginfo/primary_db | 487 kB 00:01 Checking for new repos for mirrors Could not find debuginfo for main pkg: httpd-2.2.15-15.el6.centos.1.x86_64 Could not find debuginfo pkg for dependency package apr-1.3.9-5.el6_2.x86_64 Could not find debuginfo pkg for dependency package apr-util-1.3.9-3.el6_0.1.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package db4-4.7.25-17.el6.x86_64 Could not find debuginfo pkg for dependency package expat-2.0.1-11.el6_2.x86_64 Could not find debuginfo pkg for dependency package openldap-2.4.23-26.el6_3.2.x86_64 Could not find debuginfo pkg for dependency package openldap-2.4.23-26.el6_3.2.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package pcre-7.8-4.el6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package glibc-2.12-1.80.el6_3.6.x86_64 Could not find debuginfo pkg for dependency package libselinux-2.0.94-5.3.el6.x86_64 Could not find debuginfo pkg for dependency package zlib-1.2.3-27.el6.x86_64 No debuginfo packages available to install

Read the article
"Options ExecCGI is off in this directory" When try to run Ruby code using mod_ruby

- by Itay Moav

I am on Ubuntu, Apache 2.2 Installed the fcgi via apt-get then removed it via apt-get remove. Installed mod-ruby configuration I added to Apache: LoadModule ruby_module /usr/lib/apache2/modules/mod_ruby.so RubyRequire apache/ruby-run <Directory /var/www> Options +ExecCGI </Directory> <Files *.rb> SetHandler ruby-object RubyHandler Apache::RubyRun.instance </Files> <Files *.rbx> SetHandler ruby-object RubyHandler Apache::RubyRun.instance </Files> I have a file in the www direcoty with puts 'baba' I have other files in that directory, all accessible via Apache. Test file has been chmod 777 In the browser I get 403. In Apache error log I get: [error] access to /var/www/t.rb failed for (null), reason: Options ExecCGI is off in this directory If I move this to a sub folder rubytest and modify the relevant config to be: <Directory /var/www/rubytest> Options +ExecCGI </Directory> and making sure the directory has 755 permissions on it, it just try to download the file, as if it does not recognize the postfix *.rb any more If I give directory and files 777 it fails: usr/lib/ruby/1.8/apache/ruby-run.rb:53: warning: Insecure world writable dir /var/www/rubytest in LOAD_PATH, mode 040777 [Tue May 24 19:39:58 2011] [error] mod_ruby: error in ruby [Tue May 24 19:39:58 2011] [error] mod_ruby: /usr/lib/ruby/1.8/apache/ruby-run.rb:53:in load': loading from unsafe file /var/www/rubytest/t.rb (SecurityError) [Tue May 24 19:39:58 2011] [error] mod_ruby: from /usr/lib/ruby/1.8/apache/ruby-run.rb:53:in handler' BUT, IF I USE *.rbx it works like a charm...go figure.

Read the article
Cannot access certain URL on my wireless

- by dehmann

Problem: On my wireless network at home, there is one URL that I just cannot access with my browser: http://research.microsoft.com/ I have no problems with the Internet connection otherwise. But on that address I just get The connection was reset The connection to the server was reset while the page was loading. from Firefox. I am using a DSL modem (Westell) and Linksys wireless router (using DHCP). When I use my neighbor's wireless connection I can access the microsoft site without a problem. Additional technical details: But with my connection, here is what I get from nslookup. It is weird: It first cannot find the address, but after I look up another address it can find it: $ nslookup research.microsoft.com ;; connection timed out; no servers could be reached $ nslookup google.com Non-authoritative answer: Name: google.com Address: 72.14.204.104 Name: google.com Address: 72.14.204.147 Name: google.com Address: 72.14.204.99 Name: google.com Address: 72.14.204.103 $ nslookup research.microsoft.com Non-authoritative answer: Name: research.microsoft.com Address: 131.107.65.14 But even after nslookup finds it Firefox still cannot access it. Here is what traceroute says: $ traceroute http://research.microsoft.com/ traceroute: Warning: http://research.microsoft.com/ has multiple addresses; using 8.15.7.117 traceroute to http://research.microsoft.com/ (8.15.7.117), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 4.515 ms 2.760 ms 3.072 ms 2 * * * Traceroute just to the IP: $ traceroute 131.107.65.14 traceroute to 131.107.65.14 (131.107.65.14), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 11.912 ms 2.684 ms 2.808 ms 2 * * * Comparison: Traceroute to google.com IP: $ traceroute 72.14.204.99 traceroute to 72.14.204.99 (72.14.204.99), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 6.428 ms 6.981 ms 117.099 ms 2 * * * Any comments / help?

Read the article
Serving images from another hostname vs Apache overload for the rewrites

- by luison

We are trying to improve further the speed of some sites with older HTML in order as well to obtain better SEO results. We have now applied some minify measures, combined html, css etc. We use a small virtualized infrastructure and we've always wanted to use a light + standar http server configuration so the first one can serve images and static contents vs the other one php, rewrites, etc. We can easily do that now with a VM using the same files and conf of vhosts (bind mounts) on apache but with hardly any modules loaded. This means the light httpd will have smaller fingerprint that would allow us to serve more and quicker, have more minSpareServer running, etc. So, as browsers benefit from loading static content from different hostnames as well, we've thought about building a rewrite rule on our main server (main.com) to "redirect" all images and css *.jpg, *.gif, *.css etc to the same at say cdn.main.com thus the browser being able to have more connections. The question is, assuming we have a very complex rewrite ruleset already (we manually manipulate many old URLs for SEO) will it be worth? I mean will the additional load of main's apache to have to redirect main.com/image.jpg (I understand we'll have to do a 301) to cdn.main.com/image.jpg + then cdn.main.com having to serve it, be larger than the gain we would be archiving on the browser? Could the excess of 301s of all images on a page be penalized by google? How do large companies work this out, does the original code already include images linked from the cdn with absolute paths? EDIT Just to clarify, our concern is not to do so much with server performance or bandwith. We could obviously employ an external CDN server but we have plenty CPU and bandwith. Our concern is with how to have "old" sites with plenty semi-static HTML content benefiting from splitting connections for images and static content via apache without having to change the html to absolute paths (ie. image.jpg to cdn.main.com/image.jpg happening on the server not the code)

Read the article
Skype can not find libssl.so.10 on 64-bit Fedora Linux

- by itpastorn

Skype will not start: $ skype & skype: error while loading shared libraries: libssl.so.10: wrong ELF class: ELFCLASS64 $ ldd /usr/bin/skype |grep ssl libssl.so.10 => not found OK, missing libssl. Where is it? $ ls -l /usr/lib/libssl.so* lrwxrwxrwx. 1 root root ... /usr/lib/libsssl.so -> libcrypto.so.1.0.1e lrwxrwxrwx. 1 root root ... /usr/lib/libssl.so.10 -> libssl.so.6 -rwxr-xr-x. 1 root root ... /usr/lib/libssl.so.1.0.1e lrwxrwxrwx. 1 root root ... /usr/lib/libssl.so.6 -> /usr/lib64/libssl.so.10 OK, it points to libssl.so.6 which in turns points to the 64-bit version. $ ls -l /usr/lib64/libssl.so* lrwxrwxrwx. 1 root root ... /usr/lib64/libssl.so.10 -> libssl.so.1.0.1e -rwxr-xr-x. 1 root root ... /usr/lib64/libssl.so.1.0.1e lrwxrwxrwx. 1 root root ... /usr/lib64/libssl.so.6 -> /usr/lib64/libssl.so.10 So, why is my linkchain not picked up by Skype? (Identical problem exists with libcrypto, BTW).

Read the article
Installing GitHub for Mac - "Github cannot be opened because of a probem"

- by betitall

I'm trying to get started using Git for Mac, but I receive an error when I try to run the program. I'm new to GitHub and relatively new to Mac. First, I installed Git using the downloadable .dmg file named "git-1.7.12.3-intel-universal-snow-leopard". I ran the .pkg file contained therein and the install seemed to work fine. I'm using a new macbook pro w/ retina. Then I downloaded the Github for Mac installer, "mac_GitHub for Mac 69.zip". When I double-click the file, it shows that there is a single file of type "Application". Double-clicking that application file produces the error: "GitHub cannot be opened because of a problem". Here are the partial details of that error: Application Specific Information: dyld: launch, loading dependent libraries Dyld Error Message: Library not loaded: @executable_path/../Frameworks/Rebel.framework/Rebel Referenced from: /Applications/GitHub.app/Contents/MacOS/GitHub Reason: no suitable image found. Did find: /Applications/GitHub.app/Contents/MacOS/../Frameworks/Rebel.framework/Rebel: file too short /Applications/GitHub.app/Contents/MacOS/../Frameworks/Rebel.framework/Rebel: file too short Any help would be much appreciated. Thanks.

Read the article
MMC crashes on Windows Server 2008 x64 - Exchange console, event viewer

- by David M Williams

Help! I don't know what happened; this server has been very reliable but suddenly began having problems with a particular .NET 2.0 web site simply hanging - it wouldn't load at all. However, another ASP.NET site was still fine. Reinstalling the site didn't fix it, nor did deleting and re-creating the application within IIS. Trying the event viewer was met with a horrifying "Microsoft Management Console has stopped working". Some Googling led me to believe the .NET framework was the problem. I found a tool called the .NET cleanup tool - http://blogs.msdn.com/astebner/pages/8904493.aspx - which cleaned out .NET entirely. I reinstalled .NET 1.1 and 3.5 (which installed 2.0 and 3.0 as well). Using the .NET verification tool - http://blogs.msdn.com/astebner/pages/8999004.aspx - I believe these have all installed ok. However, my server is in worse shape now. The Exchange 2010 Management Console crashes with an MMC error and now my other (previously reliable) .NET web app now hangs on loading too. I thought I should use Computer Management to remove and re-add the application and web server roles but sure enough, MMC crashes. If anyone can help I will be extremely grateful. Thank you !

Read the article
Member Status: Inquorate in RHEL 5.6

- by Eugene S

I've encountered a strange issue. I had to change the time on my Linux RHEL cluster system. I've done it using the following command from the root user: date +%T -s "10:13:13" After doing this, some message appeared relating to <emerg> #1: Quorum Dissolved (however I didn't capture the message completely). In order to investigate the issue I looked at /var/log/messages and I've discovered these errors. Below is the output of few commands I got when tried to investigate the issue, however I don't have enough knowledge to make use of this information. [root@system1a ~]# clustat Cluster Status for system4081 @ Sun Mar 25 11:45:48 2012 Member Status: Inquorate Member Name ID Status ------ ---- ---- ------ chb_sys1a 1 Online, Local chb_sys2a 2 Offline [root@system1a ~]# cman_tool nodes Node Sts Inc Joined Name 1 M 872 2012-03-25 08:43:07 chb_sys1a 2 X 0 chb_sys2a [root@system1a ~]# qdiskd -f -d [17654] debug: Loading configuration information [17654] debug: 0 heuristics loaded [17654] debug: Quorum Daemon: 0 heuristics, 1 interval, 10 tko, 0 votes [17654] debug: Run Flags: 00000035 [17654] info: Quorum Daemon Initializing stat: Bad address [17654] crit: Initialization failed I tried to search through the internet and found out a quite similar issue here. However, for some reason I am not able to access the bug on bugzilla. The link to the bug is here

Read the article
XP CD doesn't offer repair option

- by SLaks

I'm fixing an IBM Thinkpad laptop running XP Pro which doesn't boot all the way (It gets past the XP logo boot screen, a movable mouse cursor appears, and it doesn't get any further, even in safe mode) after being bumped a bit. I'd like to do a repair install. I booted it to an XP Pro CD, but the Repair install option (not recovery console) doesn't appear. After pressing F8 to accept the EULA, it says, Loading setupp.ini, then immediately goes to a partition list (it never says Searching for previous installations of Microsoft Windows). If I select the partition, it warns me that there is already a Windows installation in that partition, and that it will be completely obliterated if I continue. (So I know that it does see the contents of the hard disk) I booted the same CD in an XP virtual machine, and it offered to repair the XP installtion in the virtual machine, so the problem isn't with the CD. Does anyone know how make it do a repair install (or have any other ideas to solve the problem?) It might not show up because it's an OEM installation (but not an OEM CD), but that's just a guess.

Read the article
Why do I get this message from chrome when navigating to https://www.amazon.com?

- by Denis

This is probably not the site you are looking for! You attempted to reach www.amazon.com, but instead you actually reached a server identifying itself as *.voxcdn.com. This may be caused by a misconfiguration on the server or by something more serious. An attacker on your network could be trying to get you to visit a fake (and potentially harmful) version of www.amazon.com. Intermittently, I get a blank page when going to http://www.amazon.com. So I stuck an 's' in the URL, making it https://www.amazon.com and got that message above (with the nice red screen) from Chrome indicating there might be some monkey business going on. After hammering on the URL a bunch of times and pulling it up in Chrome's developer tool to look at the network traffic on it, the url (without the s) started behaving. The url with the s just hangs, but the red screen no longer comes up. Some specs... I've got a macBook Pro, Snow Leopard, Time Warner cable. I've had enough strange stuff happening over the past couple months (google.com, youtube.com, amazon.com not coming up or loading strange error messages with random reference numbers) that I finally decided to switch to OpenDNS. Still having problems, though.

Read the article
running red5 on port 80

- by ArneLovius

I have a red5 application http://code.google.com/p/openmeetings that runs under red5, and is accessible on port 5080 and 8443 I've installed it on Ubuntu 10.04 The eventual aim is to have it accessible via https on 443 instead of 8443, but I thought I would initially try on 80 so that any issues were just down to the port configuration and not SSL certificates. I've tried changing the port from 5080 to 80 in the red5.properties file, but it fails to start. In the red5.log I have seen ERROR o.a.coyote.http11.Http11Protocol - Error initializing endpoint java.net.BindException: Permission denied /0.0.0.0:80 In the error.log I have seen ERROR o.a.coyote.http11.Http11Protocol - Error initializing endpoint java.net.BindException: Permission denied /0.0.0.0:80 and ERROR org.red5.server.tomcat.TomcatLoader - Error loading tomcat, unable to bind connector. You may not have permission to use the selected port org.apache.catalina.LifecycleException: Protocol handler initialization failed: java.net.BindException: Permission denied /0.0.0.0:80 There is nothing else installed or running on port 80, so I presume that this is a "needs to be root" situation. I would rather not run an Internet accessible web service as root. I know that Tomcat can run on port 80 by changing “#AUTHBIND=no” to “AUTHBIND=yes” in /etc/default/tomcat6 but I have not been able to find anything similar for red5. Am I on a hiding to nothing, or is there better way than running as root ? Thanks!

Read the article
Why won't 2GB of ram across 3 of 4 slots work on my motherboard (max 2GB)?

- by Andrew

My desktop is an old home-built machine circa 200[5-6] running Ubuntu 11.10 (but this is not relevant because I'm reading available ram from BIOS loading screen), with an ASUS P5GPL motherboard, not X or X-SE - it has four slots. I'm mainly a laptop person, but keep this around for running a server from if needed, backing up to, seeding Ubuntu to people from, etc… It has four (DDR) ram slots, two black and two blue, in the order black-blue-black-blue (I will call them D, C, B, and A, respectively) with some space in the middle. The blue ones are the closest to the processor. I used to have two 512MB chips in the two blue slots. I just got a 1GB chip and plugged it into one of the black slots; my system didn't recognize it. I messed around and discovered that it will not recognize chips in many positions, and I couldn't get it to recognize all three of these chips at the same time. In particular, if I put the 512MB chips in A and B it would only use 1, but AC, AD, BD, and CD worked. I didn't try BC, I believe. Only some of these continue to work when I switch the 1GB chip into one of these positions. Can I have some advice as to how to position these chips to get all 2GB used? How about if I get another 1GB chip - where should I put the two? And what about the RAM maximum Crucial says? Can I go above 2GB, if I get another 1GB chip? Right now, I have a 512MB chip in A and the 1GB chip in C. EDIT: I read some other posts and tried dmidecode in Ubuntu to clarify the max memory question, that wasn't a major part anyways. It says my max memory module size is 1024M (OK) and my max memory size is 4096M (doesn't agree with Crucial OR the Asus web site, maybe it will only work while in Linux and BIOS won't OK it?).

Read the article
OS X 10.6 Apply ipfw rules at startup

- by Michael Irey

I have a couple of firewall rules I would to like to apply at startup. I have followed the instructions from http://images.apple.com/support/security/guides/docs/SnowLeopard_Security_Config_v10.6.pdf On page 192. However, the rules do not get applied at startup. I am running 10.6.8 NON Server Edition. I can however run: (Which applies the rules correctly) sudo ipfw /etc/ipfw.conf Which results in: 00100 fwd 127.0.0.1,8080 tcp from any to any dst-port 80 in 00200 fwd 127.0.0.1,8443 tcp from any to any dst-port 443 in 65535 allow ip from any to any Here is my /etc/ipfw.conf # To get real 80 and 443 while loading vagrant vbox add fwd localhost,8080 tcp from any to any 80 in add fwd localhost,8443 tcp from any to any 443 in Here is my /Library/LaunchDaemons/ipfw.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>ipfw</string> <key>Program</key> <string>/sbin/ipfw</string> <key>ProgramArguments</key> <array> <string>/sbin/ipfw</string> <string>/etc/ipfw.conf</string> </array> <key>RunAtLoad</key> <true /> </dict> </plist> The permissions of all the files seem to be appropriate: -rw-rw-r-- 1 root wheel 151 Oct 11 14:11 /etc/ipfw.conf -rw-rw-r-- 1 root wheel 438 Oct 11 14:09 /Library/LaunchDaemons/ipfw.plist Any thoughts or ideas on what could be wrong would be very helpful!

Read the article
Intel Rapid Storage Technology (pre-OS) driver installation

- by Nero theZero

My desktop machine is built on Gigabyte GA-Z87-UD3H and Gigabyte provides the latest driver for Intel Rapid Storage Technology (IRST), which I installed after installing the OS. Same goes for my Lenovo Thinkpad-T420. And for both machine, checking the controller device under the IDE ATA/ATAPI Controllers section in Device Manager I see the driver has been updated to the latest version. I set the SATA controller to AHCI from BIOS On the desktop machine I have one WD 2TB BLACK & one WD 3TB Green I don’t use RAID, & no chance of using in near future, but according to Intel IRST improves performance in single disk scenario too. Now I have the following questions – What is the actual purpose of IRST (pre-OS install) driver that doesn’t get served with a post-OS driver that I installed? There must be some difference, otherwise there wouldn’t be a pre-OS version of the driver. Right? In the pre-OS procedure (loading the drivers at OS-installation time) after successfully completing the OS installation, do I need that post-OS driver? Because after installing from that one I got a quick launch icon that runs the IRST configuration application. Where do get that after installing the pre-OS driver? As it is “pre-OS”, when I load it at OS-installation time, does it updates anything at BIOS level or anywhere other than HDD? That’s because I’m going to dual boot Windows 7 with Windows 8.1, and after installing Windows 7 when I install Windows 8.1 & load the IRST driver for that, is there any chance of any “overwriting” or OS-incompatibility? In short, is there anything specific to follow while installing the second OS?

Read the article
Data recovery on a data HDD (no OS)

- by aCuria

I am helping a family member with a dead hard disk. It is a seagate 200Gb 3.5" HDD in one of those old-school external enclosures. The problem was that windows failed to detect the hard disk when plugged in through USB. I removed the hard disk from its enclosure, and plugged it into my desktop PC. The BIOS does detect it upon POST, but unfortunately windows 7 would refuse to boot. It will get stuck on the loading screen with the glowing windows logo. Safe mode doesn't help either. What options do I have before going for some professional data recovery? edit: Someone modified the Title to something completely different from what I was asking, i just changed it back. 1) 2 HDD drives, DiskA(Dead), DiskB(my OS disk) 2) when B is connected to my system, everything works fine 3) when A AND B is connected, failure to boot. POSTs fine, but windows wont load 4) A has NO OS, its PURE data. It came from an EXTERNAL HDD enclosure which doesnt belong to me, and im trying to do data recovery.

Read the article
SSL with nginx on subdomain not working

- by peppergrower

I'm using nginx to serve three sites: example1.com (which redirects to www.example1.com), example2.com (which redirects to www.example2.com), and a subdomain of example2.com, call it sub.example2.com. This all works fine without SSL. I recently got SSL certs (from StartSSL), one for www.example1.com, one for www.example2.com, and one for sub.example2.com. I got them set up and everything seems to work (I'm using SNI to make all this work on a single IP address), except for sub.example2.com. I can still access it fine over non-SSL, but on SSL I just get a timeout. If I go directly to my server's IP address, I get served the SSL certificate for sub.example2.com, so I know nginx is loading the certificate properly...but somehow it doesn't seem to be listening for sub.example2.com on port 443, even though I told it to. I'm running nginx 1.4.2 on Debian 6 (squeeze); here's my config for sub.example2.com (the other domains have similar configs): server { server_name sub.example2.com; listen 80; listen 443 ssl; ssl_certificate /etc/nginx/ssl/sub.example2.com/server-unified.crt; ssl_certificate_key /etc/nginx/ssl/sub.example2.com/server.key; root /srv/www/sub.example2.com; } Does anything look amiss? What am I missing? I don't know if it matters, but StartSSL lists the base domain as a subject alternative name (SAN); not sure if that would somehow pose problems, if both subdomains list the same SAN.

Read the article
Vista failing to load after apparently being repaired

- by Joomaz

Hi, I apologise if I'm a litre vague and can give more info if needed. My vista machine has been working fine until today when I tried booting it. Vista loads showing the loading bar then goes to a black screen with the cursor on which you can move. It then remains like this for several minutes, during this time the computer doesn't sound like it's doing much, it is relatively quiet. Finally the welcome screen appears. It stays on this for several minutes again and the computer reboots. This keeps happening and the machine fails to load in safe mode - the same happens. I booted the pc with the vista disk in and ran repair your computer and used the system repair. It took about 20 minutes saying it was repairing damaged giles. I booted the pc again and the same happened. I loaded the pc with yeh vista disk again and chose repair my computer again. System repair seemed to run automatically this time and agian it did the same. I rebooted and the problem persisted. I then tried system restore to a few days ago. After half a hour as it finished it said it failed due to a portion being corrupt. I am really not sure what to do now. Any advice appreciated!

Read the article
Keyboard's media keys are blocked by a program

- by Mike Hanson

I've got a Microsoft Natural Ergonomic Keyboard 4000. In addition to the regular keys, it's also got keys for Web/Home, Search, Mail, Favorites (5), Calculator, and Media functions (Mute, Volume Up/Down, and Play/Pause). Everything works most of the time, and the exception is rather odd. I use a programming system called Clarion. When that has focus, the Media keys don't work. (All the others still do.) I've also discovered that programs that I create using Clarion also block the media keys (only when they have focus). This indicates that it's probably something in Clarion's Run-Time Library (RTL) that's causing the trouble. The keys will work if I click on a non-Clarion window before hitting the media key, but that's an undesirable hassle. The odd thing is that I have many colleagues with the same keyboard, and they have no problem. When I recently upgraded from Vista Professional to Win7 Ultimate, I noticed that various things "appear" differently. For example, with my old system, when I changed the volume or muted the volume bar visualization always appeared at the bottom right on the screen. Now it doesn't appear in certain programs, even when it works. This indicates an order of precedence for visual elements. I'm fairly certain a similar order of precedence exists for keyboard hooks. Depending on how the hooks are defined, and the order in which they're applied, it would seem that sometimes the IntelliType drivers don't see the media keystrokes. The Media keys probably behave differently than the rest of the "special" keys, because they are more of a standard across all keyboards, so perhaps are handled by a different driver hooking mechanism. Does anyone have any suggestions of how I might fix this problem? Is there some way to change the order of hooks? Delay the loading of the IntelliType driver? Thanks in advance!

Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250 | Next Page >