Search Results

Search found 8850 results on 354 pages for 'xp'.

Page 245/354 | < Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >

• Boot camp with Vista crashes on startup

  - by Mark Pim

  I have a 2006 vintage MacBook Pro (Intel Core 2 Duo) and have been using Boot Camp since it was in beta. I had been running XP SP2 on it with Tiger quite happily. I've recently wiped and reinstalled everything to upgrade to Leopard. After installing Leopard, I fired up the Boot camp assistant and used it to install the Windows 7 RC. That worked really nicely, but my HFS+ driver didn't work under Windows 7 yet so I decided to install Vista instead. I didn't repartition the drive, just launched the Vista installation disk from BIOS and told it to overwrite the existing Windows 7 install. It installed fine and I installed the Boot Camp drivers, still all fine. Now, however, every time I boot into Windows and login it hard reboots itself as the desktop is appearing. After this it works fine again. Until the next power off. Has anyone had any similar problems? Or can offer suggestions on how to solve this?

  Read the article

• Only some motherboards can support faster RAM?

  - by Wesley

  This is a question relating to one of my builds. Here are the specs: ECS P4VXASD2+ V5.0 motherboard Intel P4 Northwood 2.8 GHz (533 MHz FSB, 512 KB L2) 2x 1GB PC3200 DDR RAM Maxtor 300GB IDE HDD 16 MB NVIDIA TNT2 Pro AGP OKIA 300W ATX PSU Gigabyte 52x CD-ROM The issue right now is that I'm trying to install Windows XP from the CD drive but the computer randomly restarts partway through installation. My other build was BSODing due to RAM latency errors. This ECS board manual states that memory modules "up to 333 MHz" (i.e. PC2700) is supported. However, I am running PC3200 modules, which is clearly faster than PC2700. Would this be causing the computer from randomly restarting? EDIT 1: I also wanted to mention that my Emachines T2482 is actually running 2x 512MB PC3200 DDR RAM when it should only be supporting PC1600 and PC2100 DDR RAM. Yet there are no issues with it.

  Read the article

• How to find the /dev name of my USB device

  - by mustafa

  I am running Ubuntu 11 on VmWare on Windows XP. I want to format an SD card in Ubuntu. But, I can't figure out which /dev/xxx device the SD card is. I plug the card into the built-in socket of my laptop. I "safely remove" the device in Windows. Then, I "connect" the PCMCIA reader in VmWare. Now, I was supposing to see a new device like /dev/sdx. But, it doesn't appear :( How can I find what the name of my USB device's name and mount it? /var/log/message is empty. Here is the output of dmesg: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd And, here is the last lines of /var/log/syslog: Oct 31 18:51:21 ubuntu kernel: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd Oct 31 18:51:21 ubuntu mtp-probe: checking bus 2, device 12: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1" Oct 31 18:51:21 ubuntu mtp-probe: bus: 2, device: 12 was not an MTP device

  Read the article

• SSH access from outside to a pc inside network

  - by Raja

  I have a static IP and ADSL router linked to a linksys wireless router to which all my machines are connected. I would want to setup SVN on one of machines and provide SSH access which should be accessible by users outside my network. Would this be possible? Even just SVN access through web should be fine. Please let me know what all things should be done to achieve this ? I have Ubuntu VM running in a iMac Leopard machine and another 2 Win 7 32/64 bit machines. I can setup standalone Ubuntu or Win XP on another machine. Thanks, Raja.

  Read the article

• Is it possible create a 4TB bootable partition in the x86 edition of Windows Server 2003 Enterprise?

  - by Giffyguy

  I'd like to find out if there is any way to accomplish this, since it would benifit my storage server greatly. I am using a Promise FastTrak 8660 and five Seagate ST31000340NS 1TB drives in a RAID 5 array. I figure that if the x86 ENTERPRISE edition of Server 2003 can handle 64GB of RAM, it should have no problem supporting larger HDD volumes as well. I've read (somewhere...) that the Windows Server operating systems are not limited to the standard 2TB like Windows XP and 2000 are. I'm hoping it's something that just needs to be turned on, similar to the way PAE works for the 4GB RAM limit in x86 servers.

  Read the article

• Reset local Certificate Revocation List (CRL) manual

  - by Sasha

  How can I reset local CRL (in OS local cash) in Windows OS (XP, Windows 7) manual? We need to reset local CRL because otherwise the OS will use local CRL until "next update" period. As described in "Manually publish the CRL": Clients that have a cached copy of the previously-published CRL or delta CRL will continue using it until its validity period has expired, even though a new CRL has been published. Manually publishing a CRL does not affect cached copies of CRLs that are still valid; it only makes a new CRL available for systems that do not have a valid CRL.

  Read the article

• Squid/Kerberos authentication with only Linux

  - by user28362

  Hi, I would like to know if it possible to let a Windows Xp machine authenticate to Squid (Linux) using Kerberos without the need of an Active Directory domain. I only want to create a Kerberos ticket on the client side, which should give the client access to squid (using I.E.). I only found tutorials about configuring A.D./Squid, not an environment with only Linux servers. Thanks Update: The kerberos setup is correctly done, the proxy and client can get tickets. As for the browser (FF/IE), I get: ERROR Cache Access Denied While trying to retrieve the URL: http://www.google.com/ The following error was encountered: * Cache Access Denied. Sorry, you are not currently allowed to request: http://www.google.com/ from this cache until you have authenticated yourself. In kerberos, I get: squid_kerb_auth: Got 'YR ElRNTVMTUABBAABAB4IIogAAAAAAAAAAAAAAAAAAAAAFASgDAAAADw==' from squid (length: 59). squid_kerb_auth: parseNegTokenInit failed with rc=101 squid_kerb_auth: received type 1 NTLM token This message is strange, as I didn't configure NTLM. It looks like the browser uses the wrong authentication methode.

  Read the article

• Is there a command line (or autohotkey) way of dismounting a USB drive?

  - by justintime

  I find dismounting a USB drive takes far too many mouse clicks for my liking. Is there are command line way of doing it (XP and Vista)? Addition I have an eye condition that makes hand mouse coordination difficult so any suggestion that there aren't too many clicks will be downvoted as not answering my question. However I use AutoHotkey a lot and one use case would be to call it from an AHK script. So if there is a way to code it in AHK that will do. Added this to the tags. Further question - is it safe to remove a disk when the computer is a. on Standby or b. Hibernated. I recall that W2000 got uspet if you pulled a disk from a hibernated machine. Or is it better to explicitly dismount or sync before you hibernate or standby - prabably in a script.

  Read the article

• Dell poweredge 1850's - wont install os

  - by user1326789

  I have 3 of these dell 1850 rack servers. 1 has 3GB RAM and 2 73GB HDD's. 2 have 6GB RAM and each of them has 2 73GB HDD's. I am currently trying to install an os on them but when i boot with windows xp setup, it gives me an error saying no partition found. Now i have set these drives up in RAID on the server and i put them "online" so it should be working fine but they're not. Please assist me in installing an operating system on these, i have no clue as to if it's the BIOS or the RAID controller within it. Thanks in advance, -Matt.

  Read the article

• Isolate user from the rest of the system..?

  - by Shiki

  There is a non-techsavvy user, who doesn't want to learn, and can only use Windows XP or 7. The problem is, that the computer is shared which she would like to use, and the computer stores sensitive, important data. Since she clicks on everything, it's quite a russian roulette. How could I isolate her account from the rest of the system? Like having a profile on the computer (it runs Windows 7 now) which would have the files and other stuff sandboxed? I was thinking of having a dual boot system, but that could compromise the files too, or the boot sector (talking about Windows). Linux is not a way, hence ... see the first line. Is there such a software that can set up a sandboxed environment?

  Read the article

• dd clone hard drive: Input/Output Error though "chkdsk" says OK

  - by unknown (google)

  Hi, I've used dd to clone hard drives before using 'dd' and a live cd, but have run into a problem. The issue: dd fails with an "Input/Output Error" on /dev/sda3 , even though windows "check disk" (chkdsk) says it's ok. Context: Trying to replace my laptop hard drive w/ a faster one of the same size Laptop has NTFS on a 320gb hard drive Booting into knoppix Knoppix recognizes 'original' drive (/dev/sda) I am using a usb connection for ‘new' drive (irrelevant, but just an fyi) Knoppix recognizes the usb drive as /dev/sdb Using dd, as follows: dd if=/dev/sda of=/dev/sdb "dd" gives the I/O error above at 82Gb (out of 320Gb) I then tried checking each partition as follows and found it failed on /dev/sda3: dd if=/dev/sda1 of=/dev/null dd if=/dev/sda2 of=/dev/null dd if=/dev/sda3 of=/dev/null I have ran windows xp chkdsk on the offending drive in both "find only" and "find and fix" mode and it reports no errors Question How can I find and fix the error on my original hard drive partition (i.e. /dev/sda3) so that dd reads it successfully?

  Read the article

• Error installing Windows7 64 bits on VirtualBox

  - by MetaDark

  I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

  Read the article

• Windows 7 setup can not find hard disk

  - by Akshay Kulkarni

  Previously I had an old Seagate barracuda 160GB HDD which got crashed some days before. Yesterday I bought new Hard Disk Seagate Barracuda 500GB (ST500DM002). I just replaced the 500GB hard disk with 160GB one leaving data and power cable intact and untouched. And ideally this new hard disk should start functioning. I tried to install Windows 7 with DVD the setup says you don't have any hard disks installed on your machine. I rechecked connection tried with Win XP setup but continued receiving same error. Do I need to do some initialization stuff with hard disk before installing setup? If so how to do it. If not then is there any problem with my newly bought hard disk? Thanks In Advance.

  Read the article

• How can I set a time-limit on a batch file?

  - by drknexus

  I have a batch file that calls an external program that periodically hangs. What I would like to do is set a time limit on the batch file / CMD prompt such that it automatically closes after a certain period of time. One catch is that the external program that hangs may have one or more instances running at a given time, and I only want the batch file hitting its time limit to close the instance of the program triggered by the batch. How can I accomplish this? Ideally a solution would work on Windows XP, Vista, and 7.

  Read the article

• Where do I connect the two red SATA cables on my motherboard?

  - by Dennis Smith

  I have a Compaq Presario PC SR5110NX. The Processor is AMD Athlon 64 3800+. It has 512 MB of RAM and a 40GB Hard Drive. I'm running Windows XP Professional on it. I have 2 SATA drives, one is black and the other is white. I have 2 red little cables, and they have the letters and numbers on them. On one side of the cable it says "HP P/N:5188-2897 0720". My motherboard is a MCP61PM-HM Rev 1.0B. Where do I connect the two SATA connectors?

  Read the article

• Unable to boot from SATA II and vista

  - by pencilslate

  Trying to use a SATA II hard drive on toshiba satellite notebook. The hard drive has vista installed on it from another notebook. After inserting the hard drive, the boot starts.. shows "Microsoft windows" the progress bar, and reboots, in a loop. The existing hard drive is SATA with xp on it. The replacement one is SATA II with vista on it. I wanna troubleshoot. But, don't know where to start. Any help is much appreciated!!

  Read the article

• hide taskbar labels completely. no letters no words in the open windows. like windows 7, icons only

  - by Dom

  i posted this question in an answer box, so once person had to tell me to make it a separate question. http://superuser.com/questions/30007/hide-taskbar-labels-without-combining My Question: it shows 1 letter. i just want plain icons. like that of windows 7. no words/letter. only icons. how do u get rid of the letter? btw im using xp, i just want no words no letters on the taskbar. is it possible? answers appreciated(except bashful...)!

  Read the article

• Utility to put taskbar on multiple monitors with task grouping?

  - by davr

  Right now I use UltraMon to extend my taskbar across multiple monitors. So windows on the first monitor show up on the taskbar on the first monitor, and windows on the second monitor show up on the taskbar on the second monitor. However, UltraMon does not support "Task Grouping", a feature in Windows since XP. Basically if you have many windows open, it will group together windows from the same app in a single taskbar entry. So if I have 22 explorer windows open, I'll only see a single explorer entry, and if I click it, a menu of the 22 windows shows up. Ultramon doesn't support this, instead I see 22 taskbar entries. Are there any utilities (or built in to windows 7 ways?) that will extend the taskbar across multiple monitors, and support task grouping on the secondary monitors?

  Read the article

• Windows service running under network credentials doesn't autostart

  - by David Alpert

  I have a Subversion Server running as a resident service on a Windows XP Pro machine. That service needs to access a secure network fileshare, so I used the Services-Properties-Log On tab to tell the service to run as a user who has access to the target fileshare. That works out fine until the machine restarts, when the service fails to autostart. I am able to start it manually by logging in, going back to that Services-Properties-Log On tab and reconfiming the explicit credentials. Do I have to manually start this service under alternate credentials every time the machine reboots? Is there something else I can do to make sure that my Subversion server service autostarts with proper access to authenticate against this network share?

  Read the article

• How to know currently open ports on the Windows Firewall?

  - by QIU Quan

  On Windows XP and Windows Server 2003, I can know currently open ports on the Windows Firewall using the following command: netsh firewall show state However, on Windows 7 and Hyper-V Server 2008 R2, when I give that command, it says: No ports are currently open on all network interfaces. IMPORTANT: Command executed successfully. However, "netsh firewall" is deprecated; use "netsh advfirewall firewall" instead. Apparently there are ports open because services such as NetBIOS NS, Remote Desktop, and Hyper-V remote administration are functioning. I tried a few 'netsh advfirewall' show commands, but didn't get a way to find out which ports are permit by Windows Firewall. Knowing the currently open ports, I can be sure that I'm permitting necessary and sufficient traffic to pass in, no more, no less. Going through the whole set of advanced firewall rules is so tedious and error-prone. Is there a command on Windows 7 and Windows Server 2008 to do this efficiently?

  Read the article

• Too many processes?

  - by Mophily

  VMware Fusion v3.0.1 One vm for Windows XP, converted and recently expanded the disk size. Mac OS X 10.5.8, 2 x 3 GHz dual-core intel xeon machine. Immediately after booting, and before VMware Fusion is launched, the Activity Monitor shows eight processes associated with "vm". What caught my eye is the duplicates: netifup and dhcpd. I noticed this while trying to re-establish network connectivity after the upgrade to 3.0.1. I am not sure when the network connection was clobbered, so I cannot say it happend during the upgrade. Is eight processes typcial? I expect about six, as listed in other notes and documents on the web site. Could this be related to the failure to connect to the network?

  Read the article

• VM can't connect to outside in bridged mode

  - by Kamal

  Hi Guys, I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have.

  Read the article

• Triple Boot - With storage partition

  - by art

  I'm new to the multi-boot world, as i used to rely on virtualizing for running linux. Recently i moved to Dual booting Windows 7 and Ubuntu, with a storage partition for all my files where both operating systems could access them. Is it possible, to have 1 partition for 7, another for XP, another for Ubuntu, and a separate partition where the OS's can access my files? so 4 partitions on my hdd. and if there's a better way to go about this (or if its not possible), please let me know! thanks

  Read the article

• LamedropXPd-like very simple zipper?

  - by overtherainbow

  Hello A friend of mine needs to zip a bunch of MP3's on her locked-down XP or Vista PC at work. There are two requirements: Since she doesn't have admin rights, the application should either not require an installer, or the installer doesn't require admin rights (don't know if it's possible) Ideally, the UI should be as dead-simple as eg. LamedropXPd, ie. just drag 'n drop files from Windows Explorer onto the icon, and off she has a ZIP file in the same directory as where the MP3's are located. Does someone know of such a utility? Thank you.

  Read the article

• Configuring SMB shares in OS X

  - by Craig Walker

  I'm at my wit's end trying to control SMB file sharing on my Mac. (OS X 10.5 Leopard). I want to do something fairly simple: share a particular (non-home, non-Public) folder over my my SMB/Windows network with two users (accounts are local to my Mac), and share no other folders with anyone. The instructions on the internet are fairly straightforward: add the folders to be shared to the File Sharing panel of the Sharing System Preferences pane: ..and ensure that I'm sharing through SMB: However, when I actually try to connect via a SMB client (Windows XP in this case), the share does not appear. I see my home directory, "Macintosh HD", and my printers, but not the folder I just shared. I ensured that the underlying directory had the proper permissions (since this seems to affect share visibility) and that the "Shared Folder" checkbox was checked: ...but this didn't have any effect. I checked /etc/smb.conf but there was nothing obviously out of place there. I've also restarted smbd and rebooted. What else should I be looking for?

  Read the article

< Previous Page | 241 242 243 244 245 246 247 248 249 250 251 252  | Next Page >