Search Results

Search found 11836 results on 474 pages for 'cloud dev'.

Page 247/474 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

  • INACCESSIBLE_BOOT_DEVICE after installing Linux on same drive

    - by kdgregory
    History: My PC was configured with two drives: an 80G on IDE 0 Primary that was running Win2K, and a 320G on IDE 0 Secondary that was running Linux (Ubuntu). I decided to pull the 80Gb drive out of the system, so dd'd the entire 80 G drive (/dev/sda) onto the 320 (/dev/sdb) -- this included the MBR and partition table. Then I pulled the drive, plugged the 320 into IDE 0 Primary, and rebooted. The Windows partition worked at this point. Then I installed Ubuntu into the remaining space on the 320. It works. However, when I try to boot into Windows, I get a BSOD with the following message: *** STOP: 0x0000007B (0x89055030,0xC000014F,0x00000000,0x00000000) INACCESSILE_BOOT_DEVICE Before the BSOD I see the Win2K splash screen, and it claims to be "starting windows" for a couple of seconds -- so it appears that the first stage boot loader is working as expected. Ditto when I try booting in Safe Mode. After reading the Microsoft KB article, I booted into the recovery console and tried running chkdsk /r. It refused to run, claiming that the drive was corrupted (sorry, didn't write down the exact error message). However, I can mount the drive from Linux, and access all files. And for what it's worth, I can scan the drive using the Linux "Disk Utility" (this is Ubuntu, the menus don't show real program names), it claims the drive to be clean. The KB article mentioned that boot.ini could be the problem, so here it is: timeout=10 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows 2000 Professional" /fastdetect Any pointers on what to do next?

    Read the article

  • How would I change the DocumenRoot on the version of Apache that came pre-installed on my Mac OS X s

    - by racl101
    OK, so I want to take advantage of the Apache server that comes installed on my Mac OS X system (which means, I would like not to have to install my own version of Apache since I might as well tryto use what comes bundled), and as such, I went to change some settings in the configuration file: /etc/apache2/httpd.conf Namely, I changed the these two lines: DocumentRoot "/Users/myusername/Sites" <Directory "/Users/myusername/Sites"> So that they initially pointed to a folder in my Dropbox folder (so I could have my docs sync to my Dropbox): DocumentRoot "/Users/myusername/Dropbox/public_html" <Directory "/Users/myusername/Dropbox/public_html"> That didn't work. So then I figured, ok maybe it was too much to ask to make folder in my Dropbox be my document root. So then I thought, what if I make the Document root another folder of my choosing like so: DocumentRoot "/Users/myusername/dev-sites/public_html" <Directory "/Users/myusername/dev-sites/public_html"> and that didn't work either. After looking within the httpd.conf file for clues it seems that only two directories appear to work as Document root paths for the Apache that comes bundled with Mac OS X: /Users/myusername/Sites (or ~/Sites) and /Library/WebServer/Documents/ But trying to use any other directories didn't seem to work. I would get 403 errors on my browser. I was wondering if there was some other settings to change on the httpd.conf file or any permissions to set to make this work. Any help would be appreciated and many thanks in advance.

    Read the article

  • HPET missing from available clocksources on CentOS

    - by squareone
    I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation. Motherboard: Supermicro X9DRW Processor: 2x Intel(R) Xeon(R) CPU E5-2640 SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) Distro: CentOS 6.3 Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux Grub: hpet=force clocksource=hpet .config file: CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET=y dmesg | grep hpet: Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet cat /sys/devices/system/clocksource/clocksource0/current_clocksource: tsc cat /sys/devices/system/clocksource/clocksource0/available_clocksource: tsc jiffies What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available. Thanks in advance!

    Read the article

  • Setting up Virtual Host in Fedora Core 15 using apache

    - by Roland
    I'm trying to setup a couple of Virtual Host files on my Localhost PC running Fedora Core 15. Now I get this working, but now onloy one Virtual Host site works, and if I type in 127.0.0.1/test/testApp.php which is not related to the Virtual Host site , I get redirected to the Virtual Host site. Here's what I did. I created a new folder called virtualhosts in /etc/httpd/ where all my host files are stored in the following format site.conf In /etc/conf/httpd.conf I enabled NameVirtualHost *:80 and included the host files at the bottom of the config page like this Include virtualhosts/*.conf In /etc/hosts I added the line 127.0.0.1 website No when I run sudo httpd -t I get Syntax OK I restart apache and then the Virtualhost works, but as soon as I add other hosts and only use 127.0.0.1 as above it still links to the original host. Am I doing anything wrong here or left out something? An example of my Virtual Host file looks like this <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/website/ ServerName website ServerAlias website ErrorLog logs/dev-error_log CustomLog logs/dev-access_log common Alias /blog /var/www/html/blog/ <Directory /var/www/html/website/> Options FollowSymLinks Allow Override All Order allow,deny allow from all </Directory> #php_value error_reporting E_ALL & ~E_NOTICE & ~E_DEPRECATED php_flag display_errors On php_value date.timezone Europe/London </VirtualHost>

    Read the article

  • OpenVPN - Cannot browse ipv4 websites

    - by user1494428
    I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is I can only browse websites which support ipv6 like google. http://whatismyv6.com/ reports me that I've an ipv6 adress, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

    Read the article

  • linux automatic change permissions in resolv.file

    - by rikr
    In various linux servers I see how the permissions of the /etc/resolv.conf file change automatically. In state normal: -r--r--r-- 1 root root 103 Jul 4 11:50 resolv.conf In changed state: -r--r----- 1 root root 103 Jul 4 11:50 resolv.conf I installed auditd for monitoring it, and these are the two entries between the change: type=PATH msg=audit(07/04/2012 12:20:02.719:303) : item=0 name=/etc/resolv.conf inode=137102 dev=fe:00 mode=file,644 ouid=root ogid=root rdev=00:00 type=CWD msg=audit(07/04/2012 12:20:02.719:303) : cwd=/ type=SYSCALL msg=audit(07/04/2012 12:20:02.719:303) : arch=x86_64 syscall=open success=yes exit=3 a0=7feeb1405dec a1=0 a2=1b6 a3=0 items=1 ppid=1585 pid=3445 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=4294967295 comm=hostid exe=/usr/bin/hostid key=(null) type=PATH msg=audit(07/04/2012 12:50:03.727:304) : item=0 name=/etc/resolv.conf inode=137102 dev=fe:00 mode=file,440 ouid=root ogid=root rdev=00:00 type=CWD msg=audit(07/04/2012 12:50:03.727:304) : cwd=/ type=SYSCALL msg=audit(07/04/2012 12:50:03.727:304) : arch=x86_64 syscall=open success=yes exit=3 a0=7f2bcf7abdec a1=0 a2=1b6 a3=0 items=1 ppid=1585 pid=3610 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=4294967295 comm=hostid exe=/usr/bin/hostid key=(null) any ideas?

    Read the article

  • Is there any reason this cronjob would fail in cron, but not on the command line?

    - by Treffynnon
    I have written a little one liner that will email me when a list of files changes - I used sha512 to generate a list of hashes and then periodically check that those hashes still match. */5 * * * * /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] It works fine on the command line with: /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] As soon as I run it as a cronjob though it emails every time it runs with the failure message instead of only when the sha512sum check should fail. Is there something silly I have missed in a rush? I forgot to mention that I am running an Ubuntu machine.

    Read the article

  • Cannot browse ipv4 websites (OpenVPN )

    - by user1494428
    I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is when I'm connected to the vpn, I can only browse websites which support ipv6 like google. Ipv4 sites aren't loading (no error, just waiting indefinitely). http://whatismyv6.com/ reports me that I've an ipv6 address, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

    Read the article

  • Separated virtual networks with same subnet range with 2 interface

    - by Coolpet
    I'm having some problems with routing with the following: I have a server with 2 interfaces. It has 1-1 alias contains the same subnet. the 2 interface is connected to 2 switch, which are separated from each other. Infrastructure: Eth0 192.168.16.2/20 Eth0:eth0 192.168.1.222/20 Eth1 192.168.32.3/20 Eth1:eth1 192.168.1.223/20 I have a PC which has the IP address: 192.168.1.3/24 The problem is the next: If PC is on subnet 1, I can ping it. If PC is on subnet 2, I can't ping it. traceroute shows the route is across 192.168.1.222 ping -I 192.168.1.223 192.168.1.3 is not working on subnet 2. arp entries show the MAC address belonging to the correct interface (eth1 on subnet 2) How can I force the server to look on both interface same ranged subnet for specific IP? It searches only in the first subnet. The routing table has these 2 entries: 192.168.0.0/20 dev eth0 proto kernel scope link src 192.168.1.222 192.168.0.0/20 dev eth1 proto kernel scope link src 192.168.1.223

    Read the article

  • How to copy VirtualBox VDI contents to a partition and dual boot the OS from it?

    - by Calmarius
    I'm a Linux user but I keep a compressed Windows XP ISO with me on a pen drive for the case I absolutely need Windows to do something. This works in VirtualBox most of the time. But now I want to play some games, so I would like to run the Windows image natively. My computer don't have CD drive so cannot just burn the ISO and make an install normally. What I trying to do is moving the installed Windows image to a physical NTFS partition on my HDD and set up GRUB to let me dual boot it. I found many tutorials that deal with making VDI to physical drive. But they assume I want to overwrite my entire drive. Moving the raw disk image with dd to the partition resulted in a corrupt partition. I also tried the VMDK trick to use that empty partition and install the Windows on it. Although the text mode phase of the installation finishes without problems, the VM won't work, either crashes and keeps rebooting or just immediately or freezes (depending on how I created the VMDK, with -rawdisk /dev/sda3 or -rawdisk /dev/sda -partition 3).

    Read the article

  • Almost All Logical Volumes Disappeared - Recovery?

    - by Alex
    We had a hard disc crash of one of two hard discs in a software raid with a LVM on top. The server is running Citrix xenserver. On the hard disk which is still intact, the volume group gets detected well, but only one LV is left. (some hashes replaced by "x") # lvdisplay --- Logical volume --- LV Name /dev/VG_XenStorage-x-x-x-x-408b91acdcae/MGT VG Name VG_XenStorage-x-x-x-x-408b91acdcae LV UUID x-x-x-x-x-x-vQmZ6C LV Write Access read/write LV Status available # open 0 LV Size 4.00 MiB Current LE 1 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 root@rescue ~ # vgdisplay --- Volume group --- VG Name VG_XenStorage-x-x-x-x-408b91acdcae System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 698.62 GiB PE Size 4.00 MiB Total PE 178848 Alloc PE / Size 1 / 4.00 MiB Free PE / Size 178847 / 698.62 GiB VG UUID x-x-x-x-x-x-53w0kL I could understand if a full physical volume is lost - but why only the logical volumes? Is there any explanation for this? Is there any way to recover the logical volumes? EDIT We are here in a rescue system. The problem is that the whole server does not boot (GRUB error 22) What we are trying to do is to access the root filesystem. But everything was in the LVM. We have only this: (parted) print Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 750GB 750GB primary boot, lvm And this 750GB LVM volume is exactly what we see on top.

    Read the article

  • Why is my rsync so slow?

    - by iblue
    My Laptop and my workstation are both connected to a Gigabit Switch. Both are running Linux. But when I copy files with rsync, it performs badly. I get about 22 MB/s. Shouldn't I theoretically get about 125 MB/s? What is the limiting factor here? EDIT: I conducted some experiments. Write performance on the laptop The laptop has a xfs filesystem with full disk encryption. It uses aes-cbc-essiv:sha256 cipher mode with 256 bits key length. Disk write performance is 58.8 MB/s. iblue@nerdpol:~$ LANG=C dd if=/dev/zero of=test.img bs=1M count=1024 1073741824 Bytes (1.1 GB) copied, 18.2735 s, 58.8 MB/s Read performance on the workstation The files I copied are on a software RAID-5 over 5 HDDs. On top of the raid is a lvm. The volume itself is encrypted with the same cipher. The workstation has a FX-8150 cpu that has a native AES-NI instruction set which speeds up encryption. Disk read performance is 256 MB/s (cache was cold). iblue@raven:/mnt/bytemachine/imgs$ dd if=backup-1333796266.tar.bz2 of=/dev/null bs=1M 10213172008 bytes (10 GB) copied, 39.8882 s, 256 MB/s Network performance I ran iperf between the two clients. Network performance is 939 Mbit/s iblue@raven $ iperf -c 94.135.XXX ------------------------------------------------------------ Client connecting to 94.135.XXX, TCP port 5001 TCP window size: 23.2 KByte (default) ------------------------------------------------------------ [ 3] local 94.135.XXX port 59385 connected with 94.135.YYY port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec

    Read the article

  • Putting and configuring grub on an external drive

    - by HisDudeness
    I want to put a bunch of minor emergency operating systems (such as GParted Live, DSL, Puppy Linux and so on) on a partitioned USB pen drive, with a dedicated grub boot loader on it, which I want to start when I select the drive in the BIOS to boot. The problem is: when writing grub boot options I must tell where kernel and initial ram files are located, but the USB drive can have different letters depending on when I did plug it in, if some others external drive were mounted. So, how can I write appropriate options which automatically refer to the drive grub is installed on without having to specify absolute paths, which might change (I mean, like (hd1,msdos1) ot /dev/sdb1)? And, while we are at it, can I have grub working on a device without an operating system on it to which it can refer? I mean, I want to address the command sudo grub-install /dev/sdb from the LMDE system I'm on right now, but I won't have LMDE on my pen drive. Is that a problem? And installing grub on another device, will I keep the grub I have right now on my HDD?

    Read the article

  • How to start and stop a systemd unit with another?

    - by Andy Shinn
    I am using CoreOS to schedule systemd units with fleet. I have two units (firehose.service and firehose-announce.service. I am trying to get the firehose-announce.service to start and stop along with the firehose.service. Here is the unit file for firehose-announce.service: [Unit] Description=Firehose etcd announcer BindsTo=firehose@%i.service After=firehose@%i.service Requires=firehose@%i.service [Service] EnvironmentFile=/etc/environment TimeoutStartSec=30s ExecStartPre=/bin/sh -c 'sleep 1' ExecStart=/bin/sh -c "port=$(docker inspect -f '{{range $i, $e := .NetworkSettings.Ports }}{{$p := index $e 0}}{{$p.HostPort}}{{end}}' firehose-%i); echo -n \"Adding socket $COREOS_PRIVATE_IPV4:$port/tcp to /firehose/upstream/firehose-%i\"; while netstat -lnt | grep :$port >/dev/null; do etcdctl set /firehose/upstream/firehose-%i $COREOS_PRIVATE_IPV4:$port --ttl 300 >/dev/null; sleep 200; done" RestartSec=30s Restart=on-failure [X-Fleet] X-ConditionMachineOf=firehose@%i.service I am trying to use BindsTo with the notion that start and stop of firehose.service will also start or stop firehose-announce.service. But this never happens correctly. If firehose.service is stopped, then firehose-announce.service goes to failed state. But when I start firehose.service, the firehose-announce.service doesn't start up. What am I doing wrong here?

    Read the article

  • Explain why .bash_logout won't run commands?

    - by Droogans
    So I've been wondering how to run these two lines of code everytime I close an open instance of Terminal: history -c cat /dev/null > ~/.bash_history I export HISTFILE=5 on startup, but still want to flush that out when I'm done. I've tried looking around a bit in a couple of places, and haven't had much luck. I run Linux Mint, and would also note here that I ran into a similar issue with .bash_profile; eventually, I discovered I needed to place all start up code in .bashrc, so maybe that has something to do with it. Here's my .bash_logout file: #!/bin/bash # ~/.bash_logout: executed by bash(1) when login shell exits. # when leaving the console clear the screen to increase privacy if [ "$SHLVL" = 1 ]; then history -c cat /dev/null > ~/.bash_history [ -x /usr/bin/clear_console ] && /usr/bin/clear_console -q fi #this does nothing on exit... echo 'logout'; sleep 2s I've tried re-arranging this script many ways, I'm not sure if I don't understand how bash works, and if any of this is running in the first place. Does the fact that I run Xserver make bash consider Terminal something that isn't a log-out on exit?

    Read the article

  • Recovering a broken NTFS filesystem?

    - by OverTheRainbow
    A much-needed Windows Update broke a Vista laptop that was running fine until then: After booting up, Windows displays "Please wait..." but it never goes anywhere. I waited for a couple of hours, there is a bit of disk activity, but it didn't work out in the end. I booted with the Vista DVD, chose "Repair your computer" which said that there was nothing wrong :-/ Next, I booted it up with a Linux USB keydrive, and ran Gparted 0.8.1 (which includes ntfsresize v2011.4.12AR.4 libntfs-3g) which displays a bunch of warnings for the NTFS partition where the Vista system is located such as: ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 16 has no FILE magic (0x0) Next, I ran ntfsfix /dev/sda2, which said: Mounting volume... OK Processing of $MFT and $MFTMirr completed successfully. NTFS volume version is 3.1. NTFS partition /dev/sda2 was processed successfully. Next, I rebooted Vista, which did a CHKDSK, before rebooting. But I'm still getting nowhere with "Please wait..." Before I copy the user's data to another host and reinstall Vista from a DVD, does someone know what I could try? Thank you. Edit: In case someone else has the same issue... After the BIOS, hit F8 and choose "Repair your computer", followed by "Toshiba HDD Recovery". In addition to a 1,5GB partition labelled "WinRE", the hard disk contains a second partition labeled "Data" from which the application will fetch a system image and reinstall it in the "Vista" partition. Make sure you copy your data out of the system partition before doing this.

    Read the article

  • Ubuntu 12.04 can't boot after installing with software RAID 1

    - by Bill
    I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

    Read the article

  • Things to consider when building a continuous integration server?

    - by Dave
    I'm new to continuous integration, but immediately realize its value, and I want to get one set up right away. I have played with TeamCity and have it working in a VM great. Now, I don't want to spend money on another system, so I was planning on just doing the VM again on a faster machine (i.e. my dev system). There are a few questions that come to mind with this: Hard disk allocation - how big should it be? Sure, 60GB seems like more than enough, but people also used to think that we'd never need more than 64KB of RAM Backups - is it even important to back up the integration server? Sure, I guess it's nice so that one doesn't have to go through the entire configuration process again, but I would think that's about it. I could snapshot my VM every time I do a configuration change, and then do a backup of applications only (ignore the buildAgent stuff). Migration - if I want to go away from a VM on my dev system, to a new server, which maybe even runs Windows Server 2003, is it easy enough? Perhaps this is a particular point best suited for StackOverflow.

    Read the article

  • How can I recover my data from a damaged hard drive?

    - by krk
    a few days ago when I was working on windows my laptop was beaten on the side where the hard drive is located. As a result, it was damaged and I couldn't access the windows partition. I had to boot the linux one, which is working without any trouble. I have 2 partition formatted with ntfs, the one with windows on it, and the other one intended to store data. I mounted the windows partition from ubuntu and I could see all my files. But when I tried to mount the data partition it was impossible. It threw me an error, it couldn't recognize ntfs partition. I try to copy the damaged disk into an external hard drive using the command: dd if=/dev/sda of=/dev/sdb conv=noerror,sync The progress stopped at 60%. I was still unable to mount the data partition. Now I'm trying to backup my files using an utility called Photorec. The problem is that it is recovering my files in a disorderly way, it is all mixed up and I need my original directory structure, it will become an endless task to organize the files as they were before. Is there any way I can get my partition back?

    Read the article

  • Routing Traffic With OpenVPN

    - by user224277
    Few minutes ago i configured my VPN server, and actually I can connect to my VPN but all trafic is going through my normal home network. On my OpenVPN application I've got an information : Server IP: **.185.***.*10 Client IP: 10.8.0.6 Traffic: 7.3 KB in, 5.6 KB out Connected: 10 June 2014 19:21:59 So everything is connected but how I can setup on windows 7 that all trafic have to go through OpenVPN network card ?? Client setting : client dev tun proto udp # enter the server's hostname # or IP address here, and port number remote **.185.***.*10 1194 resolv-retry infinite nobind persist-key persist-tun # Use the full filepaths to your # certificates and keys ca ca.crt cert user1.crt key user1.key ns-cert-type server comp-lzo verb 6 Server setting : port 1194 proto udp dev tun # the full paths to your server keys and certs ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh2048.pem cipher BF-CBC # Set server mode, and define a virtual pool of IP # addresses for clients to use. Use any subnet # that does not collide with your existing subnets. # In this example, the server can be pinged at 10.8.0.1 server 10.8.0.0 255.255.255.0 # Set up route(s) to subnet(s) behind # OpenVPN server push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" ifconfig-pool-persist /etc/openvpn/ipp.txt keepalive 10 120 status openvpn-status.log verb 6 and sysctl : net.ipv4.ip_forward=1 Thank you for your time and help.

    Read the article

  • Sudo won't execute command as another user

    - by TOdorus
    I'm trying to get a unicorn server to start when the server boots. I've created a shell script which works if I log as the ubuntu user and run /etc/init.d/unicorn start Shell script #!/bin/sh case "$1" in start) cd /home/ubuntu/projects/asbest/current/ unicorn_rails -c /home/ubuntu/projects/asbest/current/config/unicorn.rb -D -E production ;; stop) if ps aux | awk '{print $2 }' | grep `cat ~/projects/asbest/current/tmp/pids/unicorn.pid`> /dev/null; then kill `cat ~/projects/asbest/current/tmp/pids/uni$ ;; restart) $0 stop $0 start ;; esac When I rebooted the server I noticed that the unicorn server wasn't listening to a socket. Since I ran the code succesfully as the ubuntu user I modified the script to let it always use the ubuntu user via sudo. #!/bin/sh case "$1" in start) cd /home/ubuntu/projects/asbest/current/ sudo -u ubuntu unicorn_rails -c /home/ubuntu/projects/asbest/current/config/unicorn.rb -D -E production ;; stop) if ps aux | awk '{print $2 }' | grep `cat ~/projects/asbest/current/tmp/pids/unicorn.pid`> /dev/null; then sudo -u ubuntu kill `cat ~/projects/asbest/current/tmp/pids/uni$ ;; restart) $0 stop $0 start ;; esac After rebooting unicorn still wouldn't start, so I tried running the script from the command line. Now I get the following error sudo: unicorn_rails: command not found I've searched high and low to what could cause this, but I'm afraid I've tapped my limited understanding of Linux. From what I can understand is that although sudo should use the ubuntu user to execute the commands, it still uses the environment of the root user, which isn't configured to run ruby or unicorn. Does anybody have any experience with this?

    Read the article

  • Script apparently changing file permissions on Mac OS to 000

    - by half_bit
    I wrote a little shellscript that helps installing a web application. The script itself just downloads a zip archive, extracts it and changes the permissions of the extracted files to the one needed to run the webapp. The problem now is that some users reported that after running my script, all the permissions of every file in their home directory or even on their whole computer changed to 000 (except the actual unzipped files which do have the correct permissions). The only lines in my script actually doing IO are these: URL="http://foo.com/" FILENAME="some.zip" curl --silent "$URL$FILENAME" -o $FILENAME > /dev/null echo "Unzipping...\c" if unzip -oqq $FILENAME > /dev/null then chmod -R 777 app/tmp app/webroot app/Config/database* app/configuration* chown -R www:www * rm $FILENAME echo "\t\t\tOK" exit 0 else echo "\t\t\tERROR" exit 1 fi I seriously can't explain this to myself. How can this even be possible? It is entirely possible that the users accidentally ran the script in their home directory, but that still wouldn't explain why the permissions where set to 000, not www/777.

    Read the article

  • Fedora 17 transparent Ethernet Bridge not forwarding IP traffic

    - by mcdoomington
    I am running on Fedora 17 with the latest ebtables and have been trying to setup a transparent bridge - using the following script, I send a ping through the bridged host and only see the requests on the bridge (among other traffic from eth0), BUT, arps and arp replies are making it through. My host is setup - Client 192.168.1.10 <-- eth0 -- eth2 192.168.1.20 Ethernet script: #!/bin/sh brctl addbr br0; brctl stp br0 on; brctl addif br0 eth0; brctl addif br0 eth2; (ifdown eth0 1>/dev/null 2>&1;); (ifdown eth2 1>/dev/null 2>&1;); ifconfig eth0 0.0.0.0 up; ifconfig eth2 0.0.0.0 up; echo "1" > /proc/sys/net/ipv4/ip_forward; ebtables -P INPUT DROP ebtables -P FORWARD DROP ebtables -P OUTPUT DROP ebtables -A FORWARD -p ipv4 -j ACCEPT ebtables -A FORWARD -p arp -j ACCEPT Any assistance would be great!

    Read the article

  • CodePlex Daily Summary for Saturday, January 01, 2011

    CodePlex Daily Summary for Saturday, January 01, 2011Popular ReleasesBloodSim: BloodSim - 1.3.0.0: - Added tally for number of boss swings and swing avoids - Removed a large number of options that were carried over from Beta and are no longer relevant - Changed stat entry to use Rating format for Dodge, Parry, Haste and Mastery - Rearranged Settings interface - BloodSim will now check for updates on startup and notify the user if a new version is available - Added option to Show/Hide the Simulation Log to increase speed during large simulationsEnhSim: EnhSim 2.2.8 ALPHA: 2.2.8 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Rebuilt Feral Spir...CBM-Command: Version 2.0 Beta 2 - 2010-12-31: This version fixes three major bugs in Version 2.0 Beta 1 Changes(64, 128, Plus/4) Changed the timing code back to version 1.7 because the clock() function in cc65 does not reflect accurate timing. (VIC, PET) The time(NULL) function is not available on these targets and thus had to be removed. Help Hot-Key Fixed - Now when you press either F1 or H you get the help file (if the CBM-Command disk is in the drive you started CBM-Command from). Updated Help File - the new help file by popmi...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.6 Released: Hi, Today we are releasing final version of Visifire, v3.6.6 with the following new feature: * TextDecorations property is implemented in Title for Chart. * TitleTextDecorations property is implemented in Axis. * MinPointHeight property is now applicable for Column and Bar Charts. Also this release includes few bug fixes: * ToolTipText property of DataSeries was not getting applied from Style. * Chart threw exception if IndicatorEnabled property was set to true and Too...StyleCop Compliant Visual Studio Code Snippets: Visual Studio Code Snippets - January 2011: StyleCop Compliant Visual Studio Code Snippets Visual Studio 2010 provides C# developers with 38 code snippets, enhancing developer productivty and increasing the consistency of the code. Within this project the original code snippets have been refactored to provide StyleCop compliant versions of the original code snippets while also adding many new code snippets. Within the January 2011 release you'll find 82 code snippets to make you more productive and the code you write more consistent!...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.2: Version: 2.0.0.2 (Milestone 2): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...eCompany: eCompany v0.2.0 Build 63: Version 0.2.0 Build 63: Added Splash screen & about box Added downloading of currencies when eCompany launched for the first time (must close any bug caused by no currency rate existing) Added corp creation when eCompany launched for the first time (for now, you didn't need to edit the company.xml file manually) You just need to decompress file "eCompany v0.2.0.63.zip" into your current eCompany install directory.SQL Monitor - tracking sql server activities: SQL Monitor 3.0 alpha 8: 1. added truncate table/defrag index/check db functions 2. improved alert 3. fixed problem with alert causing config file corrupted(hopefully)Temporary Data Storage Folder: TDS Folder version 0.2 Beta: In this release following bugs are fixed: 'Send to' entry bug fixed Preferences bug fixedSilverlight File Upload and Download with Interlink: HSS Interlink v.2.1.300: Latest Release 2.1.300 - December 29th 2010 Change Log DownloadFileDialog Modified to support an absolute uri for the DownloadUri property, which is required for OOB support UploadFileDialog Modified to support an absolute uri for the UploadUri property, which is required for OOB support For existing users be sure to uninstall the older version prior to installing this version Note: The demo application is NOT included with the installer but can be reviewed here Stable release and ready...RDPAddins .NET: RDPAddins Alpha 2 (0.2.0.0): Second alpha release... Breaking changes (now this project has 0.2 version): now addin should implement RDPAddins.Common.IAddin and should me exported with RDPAddins.Common.AddinMetadataAtrribute !!!most of all old Addin base class method you can fide in IChannel or IUI interfeces see FileTransferAddin Now RDPAddins.Common.dll just provide interfaces for addin, channel, ui, and export metadata Whole implementation is in RDPAddins.exe RDPAddins.Common.dll has some documentation :) why all this...DocX: DocX v1.0.0.11: Building Examples projectTo build the Examples project, download DocX.dll and add it as a reference to the project. OverviewThis version of DocX contains many bug fixes, it is a serious step towards a stable release. Added1) Unit testing project, 2) Examples project, 3) To many bug fixes to list here, see the source code change list history.Cosmos (C# Open Source Managed Operating System): 71406: This is the second release supporting the full line of Visual Studio 2010 editions. Changes since release 71246 include: Debug info is now stored in a single .cpdb file (which is a Firebird database) Keyboard input works now (using Console.ReadLine) Console colors work (using Console.ForegroundColor and .BackgroundColor)AutoLoL: AutoLoL v1.5.0: Added the all new Masteries Browser which replaces the Quick Open combobox AutoLoL will now attemt to create file associations for mastery (*.lolm) files Each Mastery Build can now contain keywords that the Masteries Browser will use for filtering Changed the way AutoLoL detects if another instance is already running Changed the format of the mastery files to allow more information stored in* Dialogs will now focus the Ok or Cancel button which allows the user to press Return to clo...Paint.NET PSD Plugin: 1.6.0: Handling of layer masks has been greatly improved. Improved reliability. Many PSD files that previously loaded in as garbage will now load in correctly. Parallelized loading. PSD files containing layer masks will load in a bit quicker thanks to the removal of the sequential bottleneck. Hidden layers are no longer made visible on save. Many thanks to the users who helped expose the layer masks problem: Rob Horowitz, M_Lyons10. Please keep sending in those bug reports and PSD repro files!Facebook C# SDK: 4.1.1: From 4.1.1 Release: Authentication bug fix caused by facebook change (error with redirects in Safari) Authenticator fix, always returning true From 4.1.0 Release Lots of bug fixes Removed Dynamic Runtime Language dependencies from non-dynamic platforms. Samples included in release for ASP.NET, MVC, Silverlight, Windows Phone 7, WPF, WinForms, and one Visual Basic Sample Changed internal serialization to use Json.net BREAKING CHANGE: Canvas Session is no longer supported. Use Signed...Catel - WPF and Silverlight MVVM library: 1.0.0: And there it is, the final release of Catel, and it is no longer a beta version!Euro for Windows XP: ChangeRegionalSettings 1..0: *Rocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresFlickr Wallpaper Rotator (for Windows desktop): Wallpaper Flickr 1.1: Some minor bugfixes (mostly covering when network connection is flakey, so I discovered them all while at my parents' house for Christmas).New Projects7-Up: PowerShell Scripts for Upgrading SharePoint 2007 to 2010: PowerShell scripts to automate the upgrade of SharePoint 2007 to SharePoint 2010 using a content database or hybrid upgrade approach.Apple Wireless Keyboard: Helper that Allows people use the Apple Wireless (or Wired possibly) Keyboard under Windows 7 without loosing the mac functionalityckTest: testtesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttestCrude - .Net Dependency Management: Crude is light dependency management for .net, there was no dependency management solution for .net as Maven or Ivy until now. DeepTime: Event tacking, management and plotting site.Dev/Test Cloud Platform: Dev/Test Cloud Platform is implemented by Beyondsoft and Microsoft. The platform is dedicated to software development and test scenarios. With Dev/Test Cloud you can save your cost, improve work efficiency, and improve product quality.Image Viewer (wpf version): Image viewer helps windows users to review images on their computer. It is written i Csharp and wpf.LNOne: All common code, framework code, utility code in one.LOGL::GLib: LOGL::GLib is an OpenGL game library written in C++ that allows new C++/OpenGL programmers to focus more on the game and less on the details.MAPI.GUI: Graphical program uses function from mcopyapi.codeplex.com and mdeleteapi.codeplex.com console programs. Program support longPath (above 259 chars and less 32000 chars)Movie Collection Manager: Gerenciador que ajuda a manusear coleção de filmes. Possui uma interface super atraente e simples de usar. Ferramentas e tecnologias usadas: - Visual C# 2010 Express - SQL Server 2008 R2 Express - Windows Forms - Entity Framework OBS: Projeto concorrente do Desafio .NETMyStudioServer.com: Source code for the DotNetNuke http://MyStudioServer.com websiteNusya Tester: A software to create and use various tests with right answers explanations to help one in self-education. It's developed in C#Project Zylaphon: Project Zylaphon is a C# GPL Open Source Computer Aided Music Composition System. Its design goals include highly interactive composition, music computation, and analysis; system control to be provided by an A.I. goal based agenda and quasi Blackboard for maximum flexibility.Remember The Task: RememberTheTask makes it easier to remember what you have been doing the last hour. It's developed in Visual Basic.Rent Payments Scheduling: Register rent schedules and keep track of them.Simple MVVM Toolkit for Silverlight: Simple MVVM Toolkit makes it easier to develop Silverlight applications using the Model-View-ViewModel design pattern.Sparrow.NET HtmlTemplate: Its a template engine for generating web pages.(?????HTML?????,??????html Tag???????html????。)SQLDiagUI: SQLDiagUI provides a GUI for Microsoft SQlDiag Utility which allows users to create a configuration file and start/stop/schedule SQLDiag against a SQL Server.Test Control: testing frameworkTwicko: Simple twitter client.Unity3D Utilities: Unity3D Utilities provides additional functionality to Unity3D (3.0+) via extensions, utilities, mini-frameworks, etc.VBA Composite Controls Object Model: VBA Composite Controls encapsulate complex event-driven interactions between ActiveX controls and other objects in Microsoft Office. It's uses are limited only by the imagination, from binding controls together for updating, to creating unique user interfaces!World of Warcraft Backit up(wow backit up): a project that helps you backup and restore your settings in wow easilyYamma: Yet Another Money Management Application. Build in .NET 4, SQLCE, LINQ and the Entity Framework.

    Read the article

  • CodePlex Daily Summary for Tuesday, April 20, 2010

    CodePlex Daily Summary for Tuesday, April 20, 2010New ProjectsASP.NET MVC Extensibility: ASP.NET MVC Extensibility.ASP.NET MVC Starter: Tekpub's ASP.NET MVC 2.0 Starter Site, as put together by Rob Conery in Episode 15 of Mastering ASP.NET MVC (http://tekpub.com/production/starter)AzureDemo: An internal Azure demo and test bed for some projects. After demo is complete this project will be closed.Basic Sprite Sheet Creator: A basic c# program to create sprite sheets. CodeDefender: Protect your .Net codes easily with this smart obfuscator!Crawlr: Tema 2 projectDocument Session Manager - Visual Studio addin: Document Session Manager is a Visual Studio 2008 addin for saving and restoring the list of opened documents (xml files, source files, winforms, et...Esferatec.Text.RegularExpressions: assembly to build regular expression patternsFIFA World Cup 2010 Mobile Sticker Checklist: FIFA World Cup 2010 Mobile Sticker Checklist is a small application for Windows Mobile developed in CF 3.5 to keep tracking of your sticker album. ...Finia.net: 追忆 游乐网·幻之大地FusspawnsAI: Fusspawns UT AI is a small test engine for a classic ut remote bot api. intending to improve ut's ai to a god like level without cheating bots(bots...G.A.E.T.: This is a Graphical Asymmetric Encryption Tool based on R.S.A. algorithm with the help of Java Language.Even though, this may be a small applicatio...ItzyBitzySpider: Webcrawler project from computer science at UCN.JingQiao.Ads: My DDD NTier Architecture example project.Managed Meizu SDK Demo: In this project we are sharing the source code to demonstrate the usage of managed SDK for Meizu cell phones, currently for M8. With the help of th...MaxxUtils.MaxxTagger: MaxxTagger: An Mp3 Tag Editor.. Add /Edit/Remove MP3 ID3 V1 and 2.3 Tags like Title, Artist, Album, Album Art, Genre. Besides tag editing, it also ...Maya Project Management: The Maya Project Management is a clone of RedMine with all its functions and plug-in support, using the following technologies: Microsoft .net Fra...MessageBoxLib: A simple, robust library for Xbox 360 and Windows development using the XNA Game Studio that makes using the Guide class's message box functionalit...MyWSAT - ASP.NET Membership Administration Tool: MyWSAT aka ASP.NET WSAT is a WebForms based website Starter Kit for the ASP.NET Membership Provider. It is a feature rich application that takes ca...OntologyCreator: this is my thesis and it is not finished yetPOS for .Net Handheld Products Service Object: POS for .Net Service Object Handheld Products Bar Code ScannerPostBinder: PostBinder is a small helper library that deserializes ASP.NET requests into C# classes. This eliminates having to write repeated hand wiring co...PostSharp for ASP.NET Web Sites: Adds support for PostSharp 2.0 on ASP.NET Web Sites.Rapid Dictionary: * Rapid Dictionary is a Translation Dictionary initialized by language learning network http://wordsteps.com. * Dictionary developed in C# and Co...ROrganizer: If you feel your movie files are kept in messy way, try out the ROrganizer which helps you rearrange them.RoRoWoBlog: 萝萝窝个人博客开源项目SPGroupDeflector - Explicitly deny groups to webs within your Site Collection: Secure webs within your MOSS or WSS Portal by explicitly denying access to specific users in SharePoint groups.SSIS ShapeFileSource: SSIS ShapeFileSource imports ESRI Shapefiles, and the associated attribute file (.dbf). The component based on the free Shapefile C Library.StoreManagement: University assignment. The task is to build an application that can perform basic CRUD operations on a property and use an arbitrary database. ...Surfium: TODO ;-)TaskCleaner: This is a Windows Forms project created to kill some running process in order to enhace the performance of Windows execution. Sometimes it is desi...The Expert Calendar: The Expert Calendar is a MOSS 2007 webpart which allows to connect to a Event Item List and display event items in a small design customizable cale...Visual Studio Find Results Window Tweak: This is a Visual Studio 2010 add-in which enables you to adjust the format of the Find Results Window. It is written in C#, .NET 4.0 and requires ...Weightlifting Sinclair coeficient calculator: Weightlifting Sinclair coeficient calculator for competitors (for Windows Mobile platform)Windows Azure Web Storage Explorer: Windows Azure Web Storage Explorer makes it easier for developers to browse and manage Blobs, Queues and Tables from Windows Azure Storage account....New Releases#SNMP - C# Based Open Source SNMP for .NET and Mono: CatPaw (5.0) Beta 1: SNMP v3 support in snmpd is complete.ASP.Net MVC Crud with JqGrid: Mvc Crud with JqGrid 0.3.0: Fairly major reworking of the GenericDataGrid (with alot of work from James). Most noticeable is the replacing of Edit and Delete with action butt...Basic Sprite Sheet Creator: Sprite Tool v1.1: Fixed the progress bar, it now correctly displays text and progress. Also download will now come with an installer and an executable so you don't h...Basic Sprite Sheet Creator: Sprite Tool Version 1.0: Program used to make basic sprite sheets. please visit http://coderplex.blogspot.com for more infoBraintree Client Library: Braintree-1.2.1: Escape all XMLCodeDefender: CodeDefender v0.1: Protect your .Net exe and dll files with this smart tool.ColinTesting: test: testColinTesting: test2: test2ColinTesting: test3: test3ColinTesting: test4: test4ColinTesting: test6: test6CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 0.08.63: See Source Code tab for recent change history.Document Session Manager - Visual Studio addin: Release v0.45948: Release v0.45948DotNetNuke® Community Edition: 05.04.00: Major Highlights Fixed issue where portal settings were not saved per portal. Fixed issue with importing page templates. Fixed issue with...DotNetNuke® Postgres Data Provider: DNN PG Provider 01.00.00 Beta2: Fixes problems with deprecated datatype money in Postgres. Upgrades DotnetNuke code base to 04.09.05 It comes with a patch for the DotNetNuke insta...FIFA World Cup 2010 Mobile Sticker Checklist: FIFA World Cup 2010 Mobile Sticker Checklist v0.1b: FIFA World Cup 2010 Mobile Sticker Checklist v0.1b First beta release. Requires Microsoft Compact Framework 3.5. It was tested on an HTC Touch Viva...FIFA World Cup 2010 Mobile Sticker Checklist: FIFA World Cup 2010 Mobile Sticker Checklist v0.2b: FIFA World Cup 2010 Mobile Sticker Checklist v0.2b Second beta release. Requires Microsoft Compact Framework 3.5. It was tested on an HTC Touch Viv...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 1.2: Fluent Ribbon Control Suite 1.2(supports .NET 3.5 and .NET 4 RTM) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples Found...G.A.E.T.: Graphical Asymmetric Encryption Tool: User Interface The GAET User Interface is a window with five buttons. Each button is explained the following sections. Each button has a functional...HTML Ruby: 6.21.7: As long as I don't find anything else that I can improve, this will be submitted to Mozilla for review tomorrow. Added back process inserted conten...IBCSharp: IBCSharp 1.03: What IBCSharp 1.03.zip unzips to: http://i43.tinypic.com/24ffbqr.png Note: The above solution has MSTest, Typemock Isolator, and Microsoft CHESS c...LogikBug's IoC Container: Second Release: This project is dependent upon Microsoft.Practices.ServiceLocation and must be referenced when referencing LogikBug.Injection. Click here to view d...Managed Meizu SDK Demo: Library and Demo: Library and DemoMaxxUtils.MaxxTagger: MaxxUtils.MaxxTagger: Version: 1.0.0 (Beta) Instructions: Unzip the files to a folder and then dbl click on the exe. Known Issues: 1. When u copy or move a folde...OrthoLab: Cellule: Compile with Autodesk Maya 2008 32bit and 2010 64bit.OWASP Code Crawler: OWASP Code Crawler 2.7: Code Crawler 2.7 DescriptionIn terms of functionality there is not much new stuff in this release. We transplanted the new engine. Code Crawler is ...PerceptiveMCAPI - A .NET wrapper for the MailChimp Api: V1.2.3 PerceptiveMCAPI .Net Wrapper [Beta 2]: PerceptiveMCAPI – v 1.2.3 Change logFunctionality through MailChimp API announce v1.2.5 on 15-Feb-2010 .NET Wrapper New wrapper directives; api_Me...POS for .Net Handheld Products Service Object: POS for .Net Handhelp Products Service Object: The Service Object contained herein is a work in progress. This Service Object's is written as VS 2008 C# Project. The Target Platform is x86. ...PostSharp for ASP.NET Web Sites: R1: First release.Rich Ajax empowered Web/Cloud Applications: 6.4 beta 2c: A revisiov to the first fully featured version of Visual webGui offering web/cloud development tool that puts all ASP.NET Ajax limits behind with e...Should: Beta - 1.0: This is the initial release of the Should assertions extensions.Shrinkr: v1.0: First public release.Site Directory for SharePoint 2010 (from Microsoft Consulting Services, UK): v1.2: Address a bug found in v1.1 relating to the Delete Site Listings job not incrementing the 'Site Missing Count' for some SharePoint sites.Software Localization Tool: SharpSLT 1.0: New functions Backup before saving Delete entries Undo deletion Added more comments in the codeSPGroupDeflector - Explicitly deny groups to webs within your Site Collection: SPGroupDeflector: Download the source code, the wsp solution package, and Setup.docSSIS ShapeFileSource: Version 0.1: Short Preview of SSIS ShapeFileSource ComponentStarter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity 1.0: Warning Install MySql Connector/Net 6.3 MySQL Membership MSSQL Membership XML Membership UserManager FileManager Localization Captcha ...Surfium: Linux Expo Prebuild: First public releaseTaskCleaner: Initial Working Version: In this version we have all the features listed in the project description working fine. Built under Framework 3.5.Text to HTML: 0.4.5.0: CambiosSustitución de los siguientes caracteres: Anteriores: " < > ¡ © º ¿ Á Ä É Í Ñ Ó Ö Ú Ü ß á ä é í ñ ó ö ú ü € Nuevos: & ´ ≈ ¦ • ¸ ˆ ↓ ð … ∫ ...TS3QueryLib.Net: TS3QueryLib.Net Version 0.21.16.0: This release contains a bugfix for a bug that caused connection problems when connecting using an IP for some cases. So it's strongly recommended t...Tweety - Twitter Client: Tweety - 0.96: Form activation from system tray improved. General fixes. General code refactor.Web/Cloud Applications Development Framework | Visual WebGui: 6.4 Beta 2c: A revision to the first fully featured version of Visual webGui offering unique developer/designer interface and enhanced extensibility and customi...Windows Azure - PHP contributions: PhpAzureExtensions (Azure Drives) - 0.2.0: Extension for use with Windows Azure SDK 1.1! Breaking changes! Documentation can be found at http://phpazurecontrib.codeplex.com/wikipage?title=A...WoW Character Viewer: Viewer (40545): New setup build for 40545.Xrns2XMod: Xrns2XMod 0.0.5.3: Major Source code optimization: >> Separated logical code of xm/mod conversion from renoiseSong xml. Now all necessary renoise song data code is st...XsltDb - DotNetNuke XSLT module: 01.00.99: callable tag is introduced - create javascript ajax functions more easy import/export bug is fixed mdo:ajax checkbox processing is now the same...Most Popular ProjectsRawrWBFS ManagerSilverlight ToolkitAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseWindows Presentation Foundation (WPF)ASP.NETpatterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIndustrial DashboardIonics Isapi Rewrite FilterFarseer Physics EngineBlogEngine.NETPHPExcelCaliburn: An Application Framework for WPF and SilverlightNB_Store - Free DotNetNuke Ecommerce Catalog ModuleTweetSharp

    Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >