Search Results

Search found 7238 results on 290 pages for 'step'.

Page 248/290 | < Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >

• MIX 2010 Covert Operations Day 3

  - by GeekAgilistMercenary

  I rolled over to the Mandalay for breakfast.  There I met a couple guys that were really excited about the new Windows 7 Phone.  They, as I, are also hopeful that the phone really gets a big push and some penetration into the market.  Not because we don’t like any other of the phones, but because this phone is so much better in many ways.  From a developer's perspective creating applications in Windows 7 Mobile will be vastly superior in ease, capabilities, and other aspects.  The architectural, existing code base, examples, and provisions to create things on the 7 Mobile Device are already existing as of RIGHT NOW.  There is no reason, except for fickle market conditions, for this phone to not just explode onto the market.  But alas, I won't hold my breath. Day three keynote had a whole new slew of things provided.  It also seemed that things got a lot more technical on this second keynote.  The oData was one of the very technical bits, yet it included almost no code.  Starting with a Netflix example and all the way to the Codename "Dallas" effort the oData Services provide some expansive possibilities. A mash up going 4 ways was then shown for finding a movie, finding local places to have a viewing, and information about the movie and were to prospectively find and buy additional movie bits.  The display was of course, in a Windows 7 Mobile device with literally a click to view each set of data.  The backend and the front end of this was beautifully smooth. The Dallas Project has a lot of potential for analytics in dashboard and scorecard creation also.  If there is a need or reason to provide data to a vast and wide range of clients, Dallas is a prime example of how to do that. Azure Clouds After the main keynote I checked out (while developing a working WPF & Silverlight Application for work) the session on deploying ASP.NET Applications, services, etc, into the cloud.  The session was pretty good, but I'll admit I got a little unfocused from it a few times.  It is after all hard to do two things at one time. I did take note that the cloud still is a multiple step process for deploying to.  This is a good thing and a bad thing.  There needs to be more checks and verifications when deploying something into the cloud just for technical reasons.  However, I feel that there should be some streamlining to the process.  Going back and forth between web and Visual Studio as the interface also seems kind of clunky.  Deployment should be able to be completed from within Visual Studio in my perspective.  Overall, the cloud is getting more and more impressive in function as well as theory. That's it from me so far on the third day of MIX.  I'll be note taking and studying hard to have more good tidbits to provide. Thanks for reading, if you're curious about more of my writing, check out this original entry at my other blog Agilist Mercenary.

  Read the article

• Ubuntu 12.04 LTS initramfs-tools dependency issue

  - by Mike

  I know this has been asked several times, but each issue and resolution seems different. I've tried almost everything I could think of, but I can't fix this. I have a VM (VMware I think) running 12.04.03 LTS which has stuck dependencies. The VM is on a rented host, running a live system so I don't want to break it (further). uname -a Linux support 3.5.0-36-generic #57~precise1-Ubuntu SMP Thu Jun 20 18:21:09 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Some more: sudo apt-get update [sudo] password for tracker: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. initramfs-tools : Depends: initramfs-tools-bin (< 0.99ubuntu13.1.1~) but 0.99ubuntu13.3 is installed E: Unmet dependencies. Try using -f. sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: initramfs-tools The following packages will be upgraded: initramfs-tools 1 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. 2 not fully installed or removed. Need to get 0 B/50.3 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y dpkg: dependency problems prevent configuration of initramfs-tools: initramfs-tools depends on initramfs-tools-bin (<< 0.99ubuntu13.1.1~); however: Version of initramfs-tools-bin on system is 0.99ubuntu13.3. dpkg: error processing initramfs-tools (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. dpkg: dependency problems prevent configuration of apparmor: apparmor depends on initramfs-tools; however: Package initramfs-tools is not configured yet. dpkg: error processing apparmor (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. Errors were encountered while processing: initramfs-tools apparmor E: Sub-process /usr/bin/dpkg returned an error code (1) If I look at the policy behind initramfs-tools / bin I get: apt-cache policy initramfs-tools initramfs-tools: Installed: 0.99ubuntu13.1 Candidate: 0.99ubuntu13.3 Version table: 0.99ubuntu13.3 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 Packages *** 0.99ubuntu13.1 0 100 /var/lib/dpkg/status 0.99ubuntu13 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages apt-cache policy initramfs-tools-bin initramfs-tools-bin: Installed: 0.99ubuntu13.3 Candidate: 0.99ubuntu13.3 Version table: *** 0.99ubuntu13.3 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 Packages 100 /var/lib/dpkg/status 0.99ubuntu13 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages So the issue seems to be I have 0.99ubuntu13.3 for initramfs-tools-bin yet 0.99ubuntu13.1 for initramfs-tools, and can't upgrade to 0.99ubuntu13.3. I've performed apt-get clean/autoclean/install -f/upgrade -f many times but they won't resolve. I can think of only 2 other 'solutions': Edit the dpkg dependency list to trick it into doing the installation with a broken dependency. This seems very dodgy and it would be a last resort Downgrade both initramfs-tools and initramfs-tools-bin to 0.99ubuntu13 from the precise/main sources and hope that would get them in step. However I'm not sure if this will be possible, or whether it would introduce more issues. I'm not sure how this situation arise in the first place. /boot was 96% full; it's now 56% full (it's tiny - 64MB ... this is what I got from the hosting company). Can anyone offer advice please?

  Read the article

• Problems implementing a screen space shadow ray tracing shader

  - by Grieverheart

  Here I previously asked for the possibility of ray tracing shadows in screen space in a deferred shader. Several problems were pointed out. One of the most important problem is that only visible objects can cast shadows and objects between the camera and the shadow caster can interfere. Still I thought it'd be a fun experiment. The idea is to calculate the view coordinates of pixels and cast a ray to the light. The ray is then traced pixel by pixel to the light and its depth is compared with the depth at the pixel. If a pixel is in front of the ray, a shadow is casted at the original pixel. At first I thought that I could use the DDA algorithm in 2D to calculate the distance 't' (in p = o + t d, where o origin, d direction) to the next pixel and use it in the 3D ray equation to find the ray's z coordinate at that pixel's position. For the 2D ray, I would use the projected and biased 3D ray direction and origin. The idea was that 't' would be the same in both 2D and 3D equations. Unfortunately, this is not the case since the projection matrix is 4D. Thus, some tweak needs to be done to make this work this way. I would like to ask if someone knows of a way to do what I described above, i.e. from a 2D ray in texture coordinate space to get the 3D ray in screen space. I did implement a simple version of the idea which you can see in the following video: video here Shadows may seem a bit pixelated, but that's mostly because of the size of the step in 't' I chose. And here is the shader: #version 330 core uniform sampler2D DepthMap; uniform vec2 projAB; uniform mat4 projectionMatrix; const vec3 light_p = vec3(-30.0, 30.0, -10.0); noperspective in vec2 pass_TexCoord; smooth in vec3 viewRay; layout(location = 0) out float out_AO; vec3 CalcPosition(void){ float depth = texture(DepthMap, pass_TexCoord).r; float linearDepth = projAB.y / (depth - projAB.x); vec3 ray = normalize(viewRay); ray = ray / ray.z; return linearDepth * ray; } void main(void){ vec3 origin = CalcPosition(); if(origin.z < -60) discard; vec2 pixOrigin = pass_TexCoord; //tex coords vec3 dir = normalize(light_p - origin); vec2 texel_size = vec2(1.0 / 600.0); float t = 0.1; ivec2 pixIndex = ivec2(pixOrigin / texel_size); out_AO = 1.0; while(true){ vec3 ray = origin + t * dir; vec4 temp = projectionMatrix * vec4(ray, 1.0); vec2 texCoord = (temp.xy / temp.w) * 0.5 + 0.5; ivec2 newIndex = ivec2(texCoord / texel_size); if(newIndex != pixIndex){ float depth = texture(DepthMap, texCoord).r; float linearDepth = projAB.y / (depth - projAB.x); if(linearDepth > ray.z + 0.1){ out_AO = 0.2; break; } pixIndex = newIndex; } t += 0.5; if(texCoord.x < 0 || texCoord.x > 1.0 || texCoord.y < 0 || texCoord.y > 1.0) break; } } As you can see, here I just increment 't' by some arbitrary factor, calculate the 3D ray and project it to get the pixel coordinates, which is not really optimal. Hopefully, I would like to optimize the code as much as possible and compare it with shadow mapping and how it scales with the number of lights. PS: Keep in mind that I reconstruct position from depth by interpolating rays through a full screen quad.

  Read the article

• What Counts For a DBA: Replaceable

  - by Louis Davidson

  Replaceable is what every employee in every company instinctively strives not to be. Yet, if you’re an irreplaceable DBA, meaning that the company couldn’t find someone else who could do what you do, then you’re not doing a great job. A good DBA is replaceable. I imagine some of you are already reaching for the lighter fluid, about to set the comments section ablaze, but before you destroy a perfectly good Commodore 64, read on… Everyone is replaceable, ultimately. Anyone, anywhere, in any job, could be sitting at their desk reading this, blissfully unaware that this is to be their last day at work. Morbidly, you could be about to take your terminal breath. Ideally, it will be because another company suddenly offered you a truck full of money to take a new job, forcing you to bid a regretful farewell to your current employer (with barely a “so long suckers!” left wafting in the air as you zip out of the office like the Wile E Coyote wearing two pairs of rocket skates). I’ve often wondered what it would be like to be present at the meeting where your former work colleagues discuss your potential replacement. It is perhaps only at this point, as they struggle with the question “What kind of person do we need to replace old Wile?” that you would know your true worth in their eyes. Of course, this presupposes you need replacing. I’ve known one or two people whose absence we adequately compensated with a small rock, to keep their old chair from rolling down a slight incline in the floor. On another occasion, we bought a noise-making machine that frequently attracted attention its way, with unpleasant sounds, but never contributed anything worthwhile. These things never actually happened, of course, but you take my point: don’t confuse replaceable with expendable. Likewise, if the term “trained seal” comes up, someone they can teach to follow basic instructions and push buttons in the right order, then the replacement discussion is going to be over quickly. What, however, if your colleagues decide they’ll need a super-specialist to replace you. That’s a good thing, right? Well, usually, in my experience, no it is not. It often indicates that no one really knows what you do, or how. A typical example is the “senior” DBA who built a system just before 16-bit computing became all the rage and then settled into a long career managing it. Such systems are often central to the company’s operations and the DBA very skilled at what they do, but almost impossible to replace, because the system hasn’t evolved, and runs on processes and routines that others no longer understand or recognize. The only thing you really want to hear, at your replacement discussion, is that they need someone skilled at the fundamentals and adaptable. This means that the person they need understands that their goal is to be an excellent DBA, not a specialist in whatever the-heck the company does. Someone who understands the new versions of SQL Server and can adapt the company’s systems to the way things work today, who uses industry standard methods that any other qualified DBA/programmer can understand. More importantly, this person rarely wants to get “pigeon-holed” and so documents and shares the specialized knowledge and responsibilities with their teammates. Being replaceable doesn’t mean being “dime a dozen”. The company might need four people to take your place due to the depth of your skills, but still, they could find those replacements and those replacements could step right in using techniques that any decent DBA should know. It is a tough question to contemplate, but take some time to think about the sort of person that your colleagues would seek to replace you. If you think they would go looking for a “super-specialist” then consider urgently how you can diversify and share your knowledge, and start documenting all the processes you know as if today were your last day, because who knows, it just might be.

  Read the article

• Two Candidates + One Job = Two Different Outcomes

  - by david.talamelli

  Recruiters have always headhunted (sidenote: I do not like this word, in general I think the type of people who use the phrase “headhunting” are the ones who are trying to sound more important than what they likely are). Any serious Recruiter engages in direct recruiting activity, it is part and parcel of the business it is not something unique. With the uptake in Social Media the past 4-5 years, we have seen an increase in the number of Recruiters proactively reaching out to people about job opportunities. We have also seen this activity increase across all levels of hire, from help desk roles to C-Level Executives. While getting approached about a role can be a nice boost to a person’s ego, do not let it give you an inflated sense of entitlement. It is The way that people handle themselves during these calls and subsequent interviews will have a large impact on their potential to land that job. Last week I spoke to two very different candidates, both about the same position and both with very different outcomes. On paper, Candidate #1 looked fantastic; they ticked many of the boxes that we were looking for. The person is working at global IT company and working in a similar role as the one we were hiring for but not in as senior as the role we had. This role would have been the perfect step to getting involved in more complex work for the person. Candidate #2 had less polished IT experience, ticked some of the boxes we were looking for and on paper in comparison to Candidate #1 was not as close a fit as Candidate #1 was. It seemed like I was comparing apples and oranges. After speaking to both candidates it turns out I was comparing apples and oranges except the person better suited for our role was not the one I was expecting it would be. The first candidate on paper looked great – they had the experience we were looking for and appeared to be just right for the role, but after talking to them, they gave me the impression that they thought the world owed them. The impression I was left with was that they did not equate success with hard work, they seemed more interested in “what is in it for me”. Rather than having a proper conversation with me, I was often cut off and asked to hurry it up when explaining our business, what we are doing, etc... . This person seemed more interested in the job title and money than how rather than think about ways to make the role successful. Candidate #2 who had limited experience, made up for any perceived lack of experience and them some with a demonstrated motivation to succeed and do the things needed to make that happen. Candidate #2 made a great first impression, they did not seem afraid of hard work and demonstrated a “team player” attitude. In talking to them they kept me engaged, listened and asked thoughtful questions that made me think this is the type of person who creates their own luck and who would thrive in a place like Oracle. Skills, capabilities, experience and a good resume can certainly get your foot in the door, but the wrong attitude or approach to work can close those opportunities just as easily. On the other hand, hard work, effort and a genuine work ethic may help open those doors that would otherwise closed for you. A resume with all the credentials gets you in the front door but that is just the beginning of the process. It is not how we start the race that is important, it’s how things end that matter most.

  Read the article

• Critical Threads Optimization

  - by Rafael Vanoni

  Background One of the more common issues we've been seeing in the field is the growing difficulty in optimizing performance of multi-threaded applications. A good portion of this difficulty is due to the increasing complexity of modern processors that present various degrees of sharing relationships between hardware components. Take any current CMT processor and you'll find any number of CPUs sharing execution pipelines, floating point units, caches, etc. Consequently, applying the traditional recipe of one software thread for each CPU will have varying degrees of success, according to the layout of the underlying hardware. On top of this increasing complexity we've also seen processors with features that aim at dynamically resourcing software threads according to their utilization. Intel's Turbo Boost allows processors to increase their operating frequency if there is enough thermal headroom available and the processor isn't fully utilized. More recently, the SPARC T4 processor introduced dynamic threading, allowing each core to dynamically allocate more resources to its active CPUs. Both cases are in essence recognizing that current processors will be running a wide mix of workloads, some will be designed for throughput, others for low latency. The hardware is providing mechanisms to dynamically resource threads according to their runtime behavior. We're very aware of these challenges in Solaris, and have been working to provide the best out of box performance while providing mechanisms to further optimize applications when necessary. The Critical Threads Optimzation was introduced in Solaris 10 8/11 and Solaris 11 as one such mechanism that allows customers to both address issues caused by contention over shared hardware resources and explicitly take advantage of features such as T4's dynamic threading. What it is The basic idea is to allow performance critical threads to execute with more exclusive access to hardware resources. For example, when deploying an application that implements a producer/consumer model, it'll likely be advantageous to give the producer more exclusive access to the hardware instead of having it competing for resources with all the consumers. In the case of a T4 based system, we may want to have a producer running by itself on a single core and create one consumer for each of the remaining CPUs. With the Critical Threads Optimization we're extending the semantics of scheduling priorities (which thread should run first) to include priority over shared resources (which thread should have more "space"). Now the scheduler will not only run higher priority threads first: it will also provide them with more exclusive access to hardware resources if they are available. How does it work ? Using the previous example in Solaris 11, all you'd have to do would be to place the producer in the Fixed Priority (FX) scheduling class at priority 60, or in the Real Time (RT) class at any priority and Solaris will try to give it more "hardware space". On both Solaris 10 8/11 and Solaris 11 this can be achieved through the existing priocntl(1,2) and priocntlset(2) interfaces. If your application already assigns these priorities to performance critical threads, there's no additional step you need to take. One important aspect of this optimization is that it requires some level of idleness in the system, either as a result of sizing the application before hand or through periods of transient idleness during runtime. If the system is fully committed, the scheduler will put all the available CPUs to work.Best practices If you're an application developer, we encourage you to look into assigning the right priorities for the different threads in your application. Solaris provides different scheduling classes (Time Share, Interactive, Fair Share, Fixed Priority and Real Time) that offer different policies and behaviors. It is not always simple to figure out which set of threads are critical to the performance of a workload, and it may not always be feasible to take advantage of this optimization, but we believe that this can be correctly (and safely) done during development. Overall, the out of box performance in Solaris should meet your workload's requirements. If you are looking into that extra bit of performance, then the Critical Threads Optimization may be what you're looking for.

  Read the article

• Eclipse no longer useful

  - by dgood1

  When I got my Eclipse from the Ubuntu Software Center, it was good and worked fine. I could work on Java projects fine. This week I was required to add ADT and tried the ADT-bundle, assuming it had everthing I needed, seeing that the SDK had more steps. So now, I can create Android apps using the ADT-bundle. I tried to work on my java projects again and I now discovered: I can't run my java projects: "The selection cannot be launched. And there are no recent launches." error. I also believe Eclipse doesn't know it's a java program because it all in black and white. Not the usual green/blue/red/black things when making comments, variables and Strings. I can't make new projects of ANYTHING unless I use the adt-bundle. New project only offers CVS (whatever that is) My perspectives seem limited. I remembered more choices and now I'm limited to [Java], Resource, CVS Repository, debug, Team Sync. I was told to be able to use perspectives to swap between Android and Java developing. Even after the ADT installation using "Install new Software",nothing. I can't uninstall/purge/remove Eclipse via the terminal. I tried removing it then reinstalling it via the Ubuntu Software Cetner. No results other than it's temporary removal. (Possibly unrelated) A large number of repositories are not found when updating Eclipse. (See Step 8 in Summary of what I did...) Although, on checking the versions and installation history, I confirmed Android and Java are installed. It probably just doesn't know it's there. Eclipse Indigo: Version: 3.7.2 Build id: I20110613-1736 Summary of what I did before and during the problem: Downloaded adt-bundle. Attempted instructions from teacher. (Install new Software) (Failed but other than an annoying "can't find repository" during each update, no damage to report) (Fixed) Ran "eclipse" executable from the adt-bundle. Updated Eclipse. (After restart, I noticed the problem) NOTE: other than window arrangement, I had no customizations. Played around with the Windowspreferences and Projectpropertied. Restored to default settings after no results. Tried "apt-get purge eclipse". Couldn't find Eclipse so, nothing happened. Used Software center. No results. Tried swapping workspaces. I tried different folder, deeper folder, renaming. All return the same problem. Deleted adt-bundle (browsed folders then delete). Got Adt-sdk only. Installed. Can't find any changes other than some disk space usage. Of course, I can't make Android apps until I unzip the bundle again. WindowsPreferencesInstall/UpdateAvailable Software Sites, Checked as many repositories as possible, then updated. Still nothing. I'm about to get a second try on uninstalling it, because I think my last action will just be taking up space. But I'll wait for tomorrow, in case the answer will help. Any thoughts?

  Read the article

• Session and Pop Up Window

  - by imran_ku07

   Introduction :        Session is the secure state management. It allows the user to store their information in one page and access in another page. Also it is so much powerful that store any type of object. Every user's session is identified by their cookie, which client presents to server. But unfortunately when you open a new pop up window, this cookie is not post to server with request, due to which server is unable to identify the session data for current user.         In this Article i will show you how to handle this situation,  Description :         During working in a application, i was getting an Exception saying that Session is null, when a pop window opens. After seeing the problem more closely i found that ASP.NET_SessionId cookie for parent page is not post in cookie header of child (popup) window.         Therefore for making session present in both parent and child (popup) window, you have to present same cookie. For cookie sharing i passed parent SessionID in query string,   window.open('http://abc.com/s.aspx?SASID=" & Session.SessionID &','V');           and in Application_PostMapRequestHandler application Event, check if the current request has no ASP.NET_SessionId cookie and SASID query string is not null then add this cookie to Request before Session is acquired, so that Session data remain same for both parent and popup window.    Private Sub Application_PostMapRequestHandler(ByVal sender As Object, ByVal e As EventArgs)           If (Request.Cookies("ASP.NET_SessionId") Is Nothing) AndAlso (Request.QueryString("SASID") IsNot Nothing) Then               Request.Cookies.Add(New HttpCookie("ASP.NET_SessionId", Request.QueryString("SASID")))           End If       End Sub           Now access Session in your parent and child window without any problem. How this works :          ASP.NET (both Web Form or MVC) uses a cookie (ASP.NET_SessionId) to identify the user who is requesting. Cookies are may be persistent (saved permanently in user cookies ) or non-persistent (saved temporary in browser memory). ASP.NET_SessionId cookie saved as non-persistent. This means that if the user closes the browser, the cookie is immediately removed. This is a sensible step that ensures security. That's why ASP.NET unable to identify that the request is coming from the same user. Therefore every browser instance get it's own ASP.NET_SessionId. To resolve this you need to present the same parent ASP.NET_SessionId cookie to the server when open a popup window.           You can confirm this situation by using some tools like Firebug, Fiddler,  Summary :          Hopefully you will enjoy after reading this article, by seeing that how to workaround the problem of sharing Session between different browser instances by sharing their Session identifier Cookie.

  Read the article

• How does interpolation actually work to smooth out an object's movement?

  - by user22241

  I've asked a few similar questions over the past 8 months or so with no real joy, so I am going make the question more general. I have an Android game which is OpenGL ES 2.0. within it I have the following Game Loop: My loop works on a fixed time step principle (dt = 1 / ticksPerSecond) loops=0; while(System.currentTimeMillis() > nextGameTick && loops < maxFrameskip){ updateLogic(dt); nextGameTick+=skipTicks; timeCorrection += (1000d/ticksPerSecond) % 1; nextGameTick+=timeCorrection; timeCorrection %=1; loops++; } render(); My intergration works like this: sprite.posX+=sprite.xVel*dt; sprite.posXDrawAt=sprite.posX*width; Now, everything works pretty much as I would like. I can specify that I would like an object to move across a certain distance (screen width say) in 2.5 seconds and it will do just that. Also because of the frame skipping that I allow in my game loop, I can do this on pretty much any device and it will always take 2.5 seconds. Problem However, the problem is that when a render frame skips, the graphic stutter. It's extremely annoying. If I remove the ability to skip frames, then everything is smooth as you like, but will run at different speeds on different devices. So it's not an option. I'm still not sure why the frame skips, but I would like to point out that this is Nothing to do with poor performance, I've taken the code right back to 1 tiny sprite and no logic (apart from the logic required to move the sprite) and I still get skipped frames. And this is on a Google Nexus 10 tablet (and as mentioned above, I need frame skipping to keep the speed consistent across devices anyway). So, the only other option I have is to use interpolation (or extrapolation), I've read every article there is out there but none have really helped me to understand how it works and all of my attempted implementations have failed. Using one method I was able to get things moving smoothly but it was unworkable because it messed up my collision. I can foresee the same issue with any similar method because the interpolation is passed to (and acted upon within) the rendering method - at render time. So if Collision corrects position (character now standing right next to wall), then the renderer can alter it's position and draw it in the wall. So I'm really confused. People have said that you should never alter an object's position from within the rendering method, but all of the examples online show this. So I'm asking for a push in the right direction, please do not link to the popular game loop articles (deWitters, Fix your timestep, etc) as I've read these multiple times. I'm not asking anyone to write my code for me. Just explain please in simple terms how Interpolation actually works with some examples. I will then go and try to integrate any ideas into my code and will ask more specific questions if need-be further down the line. (I'm sure this is a problem many people struggle with).

  Read the article

• Enterprise Manager in EPM 11.1.2.x...a game of hide and seek!

  - by THE

  Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} guest article: Maurice Bauhahn: Users of Oracle Hyperion Enterprise Performance Management 11.1.2.0 and 11.1.2.1 may puzzle why the URL http://<servername>:7001/em may not conjure up Enterprise Manager Fusion Middleware Control. This powerful tool has been installed by default...but WebLogic may not have been 'Extended' to allow you to call it up (we are hopeful this ‘Extend’  step will not be needed with 11.1.2.2). The explanation is on pages 425 and following of the following document: http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-1-72-427329.pdf A close look at the screen dumps in that section reveals a somewhat scary prospect, however: the non-AdminServer servlets had all failed (see the red down-arrow icons to the right of their names) after the configuration! Of course you would want to avoid that scenario! A rephrasing of the instructions might help: Ensure the WebLogic AdminServer is not running (in a default scenario that would mean port 7001 is not active). Ensure you have logged into the computer as the installing owner of EPM. Since Enterprise Manager uses a LOT of resources, be sure that there is adequate free RAM to accommodate the added load. On the machine where WebLogic AdminServer is set up (typically the Foundation Services machine), run \Oracle\Middleware\wlserver_10.3\common\bin\config (config.sh on Unix). Select the 'Extend an existing WebLogic domain' option, and click the 'Next' button. Select the domain being used by EPM System. - Typically, the default domain is created under /Oracle/Middleware/user_projects/domains and is named EPMSystem. - Click 'Next'. Under 'Extend my domain automatically to support the following added products' - place a check mark before 'Oracle Enterprise Manager - 11.1.1.0 [oracle_common]' to select it. - Continue accepting the defaults by clicking 'Next' on each page until - on the last page you click 'Extend'. - The system will grind for a few minutes while it configures (deploys?) EM. - Start the AdminServer. Sometimes there is contention in the startup order of the various servlets (resulting in some not coming up). To avoid that problem on Microsoft Windows machines you may start and stop services via the following analogous command line commands to those run on Linux/Unix (these more carefully space out timings of these events): Ensure EPM is up:\Oracle\Middleware\user_projects\epmsystem1\bin\start.bat Ensure WebLogic is up:\Oracle\Middleware\user_projects\domains\EPMSystem\bin\startWebLogic.cmd Shut down WebLogic:\Oracle\Middleware\user_projects\domains\EPMSystem\bin\stopWebLogic.cmd Shut down EPM:\Oracle\Middleware\user_projects\epmsystem1\bin\stop.bat  Now you should be able to more successfully troubleshoot with the EM tool:

  Read the article

• IE9 and the Mystery of the Broken Video Tag

  - by David Wesst

  I was very excited when Microsoft released the Internet Explorer 9 Release Candidate. As far as I was concerned, this was another nail in the coffin for IE6 and step in the right direction for us .NET web developers as our base camp was finally starting to support the latest and greatest future-web standards. Unfortunately, my celebration was short lived as I soon hit a snag while loading up an HTML5 site I was building in Visual Studio 2010. The Mystery After updating Internet Explorer, I ran my HTML5 site that had the oh-so-lovely HTML5 video tag showing a video. Even though this worked in IE9 Beta, it appeared that IE9 RC could not load the same file. I figured that it was the video codec. Maybe IE9 RC no longer supported the video codec I used to encode my video. Here's the code I used: <video width="854" height="480" id="myOtherVideo" autoplay="" controls=""> <source src="/DemoSite1/Media/big_buck_bunny.mp4"/> <div> <p>Your browser does not support HTML5 Video.</p> </div> </video> As you can see from the code, I had the "fail-safe" code inside the video tag. The idea there being that if the video tag, or the video files themselves, are not supported by the browser my video should fail gracefully. What was even more strange was the fact that it worked in all the other HTML5 browsers that supported video. The Investigation Whoa! DJ stop the music. How can any of that make sense? Would the IE team really take such huge strides forward only to forget to include a feature that was already in the beta? I don't think so. I did plenty of searching on the web and asking around on the web, but could not seem to find anyone else having the same problem. Eventually I came across this post talking about declaring the MIME type in the .htaccess file. That got me thinking: does my web server support the video MIME type? I was using VS2010, so how do I know what kind of MIME types are supported by default? Still, my page hosted in Cassini (the web development server in VS2010) works on the other browsers. Why wouldn't it work with IE9 RC? To answer that, it was time to open up the upgraded toolbox known as the Developer's Tools in IE9 and use the new Network Tab. The Conclusion If you take a closer look at the results displayed from the Network tab, you can see that IE9 RC has interpreted the video file as text/html rather than video/mp4. To make this work, I decided to use IIS to debug my HTML5 web application by setting the web project's properties. Then, I added the MIME types that I want to support (i.e. video/mp4, video/ogg, video/webm). Et voila! The Mystery of the Broken Video Tag is solved. After Thoughts After solving the mystery, I still had the question about why my site worked in Chrome, Safari, and Firefox 3.6. After asking around, the best answer that I received was from my colleague Tyler Doerksen. He said that IE9 likely depends on the server telling it what kind of file it is downloading rather than trying to read the metadata about the data it is trying to download before doing anything. I have no facts to back this up, but it makes sense to me. In a browser war where milliseconds can make your browser fall back a few places in the race for supremacy, maybe the IE team opted to depend on the server knowing what kind of content it is serving up. Makes sense to me. In any case, that is just an educated guess. If you have any comments, feel free to post on them below. This post also appears at http://david.wes.st

  Read the article

• Book Review: Oracle ADF 11gR2 Development Beginner's Guide

  - by Grant Ronald

  Packt Publishing asked me to review Oracle ADF 11gR2 Development Beginner's Guide by Vinod Krishnan, so on a couple of long flights I managed to get through the book in a couple of sittings. One point to make clear before I go into the review.  Having authored "The Quick Start Guide to Fusion Development: JDeveloper and Oracle ADF", I've written a book which covers the same topic/beginner level.  I also think that its worth stating up front that I applaud anyone who has gone  through the effort of writing a technical book. So well done Vinod.  But on to the review: The book itself is a good break down of topic areas.  Vinod starts with a quick tour around the IDE, which is an important step given all the work you do will be through the IDE.  The book then goes through the general path that I tend to always teach: a quick overview demo, ADF BC, validation, binding, UI, task flows and then the various "add on" topics like security, MDS and advanced topics.  So it covers the right topics in, IMO, the right order.  I also think the writing style flows nicely as well - Its a relatively easy book to read, it doesn't get too formal and the "Have a go hero" hands on sections will be useful for many. That said, I did pick out a number of styles/themes to the writing that I found went against the idea of a beginners guide.  For example, in writing my book, I tried to carefully avoid talking about topics not yet covered or not yet relevant at that point in someone's learning.  So, if I was a new ADF developer reading this book, did I really need to know about ADFBindingFilter and DataBindings.cpx file on page 58 - I've only just learned how to do a drag and drop simple application so showing me XML configuration files relevant to JSF/ADF lifecycle is probably going to scare me off! I found this in a couple of places, for example, the security chapter starts on page 219 but by page 222 (and most of the preceding pages are hands-on steps) we're diving into the web.xml, weblogic.xml, adf-config.xml, jsp-config.xml and jazn-data.xml.  Don't get me wrong, I'm not saying you shouldn't know this, but I feel you have to get people on a strong grounding of the concepts before showing them implementation files.  If having just learned what ADF Security is will "The initialization parameter remove.anonymous.role is set to false for the JpsFilter filter as this filter is the first filter defined in the file" really going to help me? The other theme I found which I felt didn't work was that a couple of the chapters descended into a reference guide.  For example page 159 onwards basically lists UI components and their properties.  And page 87 onwards list the attributes of ADF BC in pretty much the same way as the on line help or developer guide, and I've a personal aversion to any sort of help that says pretty much what the attribute name is e.g. "Precision Rule: this option is used to set a strict precision rule", or "Property Set: this is the property set that has to be applied to the attribute". Hmmm, I think I could have worked that out myself, what I would want to know in a beginners guide are what are these for, what might I use them for...and if I don't need to use them to create an emp/dept example them maybe it’s better to leave them out. All that said, would the book help me - yes it would.  It’s obvious that Vinod knows ADF and his style is relatively easy going and the book covers all that it has to, but I think the book could have done a better job in the educational side of guiding beginners.

  Read the article

• Security and the Mobile Workforce

  - by tobyehatch

  Now that many organizations are moving to the BYOD philosophy (bring your own devices), security for phones and tablets accessing company sensitive information is of paramount importance. I had the pleasure to interview Brian MacDonald, Principal Product Manager for Oracle Business Intelligence (BI) Mobile Products, about this subject, and he shared some wonderful insight about how the Oracle Mobile Security Tool Kit is addressing mobile security and doing some pretty cool things.  With the rapid proliferation of phones and tablets, there is a perception that mobile devices are a security threat to corporate IT, that mobile operating systems are not secure, and that there are simply too many ways to inadvertently provide access to critical analytic data outside the firewall. Every day, I see employees working on mobile devices at the airport, while waiting for their airplanes, and using public WIFI connections at coffee houses and in restaurants. These methods are not typically secure ways to access confidential company data. I asked Brian to explain why. “The native controls for mobile devices and applications are indeed insufficiently secure for corporate deployments of Business Intelligence and most certainly for businesses where data is extremely critical - such as financial services or defense - although it really applies across the board. The traditional approach for accessing data from outside a firewall is using a VPN connection which is not a viable solution for mobile. The problem is that once you open up a VPN connection on your phone or tablet, you are creating an opening for the whole device, for all the software and installed applications. Often the VPN connection by itself provides insufficient encryption – if any – which means that data can be potentially intercepted.” For this reason, most organizations that deploy Business Intelligence data via mobile devices will only do so with some additional level of control. So, how has the industry responded? What are companies doing to address this very real threat? Brian explained that “Mobile Device Management (MDM) and Mobile Application Management (MAM) software vendors have rapidly created solutions for mobile devices that provide a vast array of services for controlling, managing and establishing enterprise mobile usage policies. On the device front, vendors now support full levels of encryption behind the firewall, encrypted local data storage, credential management such as federated single-sign-on as well as remote wipe, geo-fencing and other risk reducing features (should a device be lost or stolen). More importantly, these software vendors have created methods for providing these capabilities on a per application basis, allowing for complete isolation of the application from the mobile operating system. Finally, there are tools which allow the applications themselves to be distributed through enterprise application stores allowing IT organizations to manage who has access to the apps, when updates to the applications will happen, and revoke access after an employee leaves. So even though an employee may be using a personal device, access to company data can be controlled while on or near the company premises. So do the Oracle BI mobile products integrate with the MDM and MAM vendors? Brian explained that our customers use a wide variety of mobile security vendors and may even have more than one in-house. Therefore, Oracle is ensuring that users have a choice and a mechanism for linking together Oracle’s BI offering with their chosen vendor’s secure technology. The Oracle BI Mobile Security Toolkit, which is a version of the Oracle BI Mobile HD application, delivered through the Oracle Technology Network (OTN) in its component parts, helps Oracle users to build their own version of the Mobile HD application, sign it with their own enterprise development certificates, link with their security vendor of choice, then deploy the combined application through whichever means they feel most appropriate, including enterprise application stores.  Brian further explained that Oracle currently supports most of the major mobile security vendors, has close relationships with each, and maintains strong partnerships enabling both Oracle and the vendors to test, update and release a cooperating solution in lock-step. Oracle also ensures that as new versions of the Oracle HD application are made available on the Apple iTunes store, the same version is also immediately made available through the Security Toolkit on OTN.  Rest assured that as our workforce continues down the mobile path, company sensitive information can be secured.  To listen to the entire podcast, click here. To learn more about the Oracle BI Mobile HD, click  here To learn more about the BI Mobile Security Toolkit, click here 

  Read the article

• BizTalk Server 2013 beta on Windows 8 (with Visual Studio 2012, SQL Server 2012 &amp; ESB Toolkit 2.2)

  - by Vishal

  Hello BizTalkers, Finally, Microsoft released the beta version of BizTalk Server 2010 R2 and now its called BizTalk Server 2013. I had tried the BTS 2010 R2 CTP version on Windows Azure VM and particularly I was excited about the RESTful services support and ESB fully integrated into BizTalk. Well didn’t get chance to test it much, Azure & VM running cost associated . Anyways, I was waiting for this announcement and I was so much glad that Microsoft finally released the on premise one.  Check what’s new in the BizTalk Server 2013.  Officially Microsoft says that BizTalk Server 2013 “beta” is not supported on Windows 8 but I was curious to try it out. Below is my installation and configuration experience. Virtual Machine configuration: VM Ware Workstation 9.0. Windows 8 Enterprise x64. SQL Server 2012. Visual Studio 2012 Ultimate. BizTalk Server 2013 beta. Windows 8 Machine name: WIN8 Local Administrator account name: Admin First I installed Windows 8 Enterprise on a VM Ware Workstation 9.0 and updated the OS. Even Windows 8 is the new release so luckily didn’t had much updates to perform. Next Installed Visual Studio 2012 Ultimate which was straightforward installation. Next Installed SQL Server 2012. Select New SQL Server stand-alone installation & followed the steps as shown in the screenshot below.   Once the installation is finished, fire up SQL Server Management Studio and try connecting. Initially when the management studio opened up, I thought why did Visual Studio 2010 open when I tried opening SQL Management studio but well, they made the interface alike VS 2010. Cool, I like it. Next is the real deal, download the BizTalk Server 2013 and unzip to particular folder. Double click the Setup.exe and follow the steps in the screenshots. Install Microsoft BizTalk Server 2013 beta. I selected all the normal artifacts and also all the artifacts under Additional Software's. So far so good. Next Launch BizTalk Server Configuration and I used Basic configuration as shown in screenshot below. Didn’t expect to see this but “wala”. Successful in the first shot. Still I wasn’t sure & something would have gone wrong so fired up the BizTalk Server Administration Console and that too came up just fine. Still was not able to believe so created a simple messaging application:  message in –> message out and that too worked just fine. Finally I was convinced that BizTalk Server 2013 did work on Windows 8. Next step was to install the ESB Toolkit 2.2 which is now integrated with BizTalk Server and does not come as a separate standalone installation file. Again run the BizTalk Setup.exe from the unzipped folder. Install Microsoft ESB Toolkit. Next, unlike ESB Configuration would  not open up by itself so go to “Windows 8 so called Start” (I could not resist to write this) and open the ESB Toolkit Configuration wizard. Below screenshot display the configurations I used. Also you can find them on MSDN here. Finally after the ESB Configuration, I open Admin Console and checked the 2 ESB application deployed. Cool. This concludes my experience about installation and configuration of BizTalk Server 2013 Beta & ESB Toolkit 2.2 on Windows 8. I will try and keep writing about BizTalk Server 2013 and its use with RESTful Services etc. Thanks, Vishal Mody

  Read the article

• If not now, then when?

  - by Chris Gardner

  Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/10/25/if-not-now-then-when.aspx The time has been flying by this year. It seems like only yesterday that I mentioned the gorillagator, a simple construct of confusion to try to draw attention to my message. In reality, that message was sent over a month ago. During that time, the hours slipped to days and days to weeks. Many exciting things have happened to myself; I'm sure many exciting things have happened to you. I'm also sure that many terrifying things have happened to children and their families. 62 children enter treatment at a Children's Miracle Network Hospital every minute. That's nearly 60,000 children since I sent the last email. To put that number in perspective, that is more than the population of Greenland. If we expand that to the past year, they have been nearly 550,000 children treated. That is almost the population of Huntsville, Decatur, and all their suburbs combined. Over the past 4 years, I have raised a little more than $3,000 for Children's Hospital of Alabama. As a result, I received a call from the organizers of Extra Life thanking me for my dedicated work and informing me that I was the top supporters for Children's Hospital of Alabama ... with my measly three grand. We can do much better than that. It may sound like I'm trying to have fun by playing games for 24 hours. It is more than that. It is me using my time and body as a catalyst. It is me putting my passion to work for a cause. It is me turning my love into something tangible. I have been campaigning and fighting to give these children a chance for years. I have been asking you to help me support these children and families. I've been putting in countless hours of talking to people, impassioned emails, and carefully constructed tweets. I have been fighting with cutting edge, and sometimes expensive, technology to try to provide live streams of my marathons. I yearly put my body through 24 (and, this year, 25) hours of no sleep. I do this to represent the countless hours these families sit awake at their children's side. All I ask is a few minutes on a website and a few dollars. These few minutes and few dollars go a long way help people that are experiencing circumstances that only occur in our nightmares. I also ask that you take one extra step. Forward this plea to those that you know. I can only reach a small fraction of a percentage of the people that may be able to help. Together, we can reach the world. I raise money for Children's Hospital of Alabama. As this message branches out, people may wish to support a hospital closer to their area. I have included a link to the list of people that have dedicated their time and have received no donations. Find someone on the list supporting your local hospital and give them a donation. Let them know that their time and effort are appreciated. Together, we can do something great. Together, we can make a difference. Together, we all stand tall. Thank you. You can get more information at http://www.extra-life.org and http://childrensmiraclenetworkhospitals.org/" My donation page is http://www.extra-life.org/participant/cgardner The list of participants without donations is http://www.extra-life.org/index.cfm?fuseaction=donorDrive.eventParticipantList&page=629&eventID=512

  Read the article

• Using T4 to generate Configuration classes

  - by Justin Hoffman

  I wanted to try to use T4 to read a web.config and generate all of the appSettings and connectionStrings as properties of a class.  I elected in this template only to output appSettings and connectionStrings but you can see it would be easily adapted for app specific settings, bindings etc.  This allows for quick access to config values as well as removing the potential for typo's when accessing values from the ConfigurationManager. One caveat: a developer would need to remember to run the .tt file after adding an entry to the web.config.  However, one would quickly notice when trying to access the property from the generated class (it wouldn't be there).  Additionally, there are other options as noted here. The first step was to create the .tt file.  Note that this is a basic example, it could be extended even further I'm sure.  In this example I just manually input the path to the web.config file. <#@ template debug="false" hostspecific="true" language="C#" #><#@ output extension=".cs" #><#@ assembly Name="System.Configuration" #><#@ assembly name="System.Xml" #><#@ assembly name="System.Xml.Linq" #><#@ assembly name="System.Net" #><#@ assembly name="System" #><#@ import namespace="System.Configuration" #><#@ import namespace="System.Xml" #><#@ import namespace="System.Net" #><#@ import namespace="Microsoft.VisualStudio.TextTemplating" #><#@ import namespace="System.Xml.Linq" #>using System;using System.Configuration;using System.Xml;using System.Xml.Linq;using System.Linq;namespace MyProject.Web { public partial class Configurator { <# var xDocument = XDocument.Load(@"G:\MySolution\MyProject\Web.config"); var results = xDocument.Descendants("appSettings"); const string key = "key"; const string name = "name"; foreach (var xElement in results.Descendants()) {#> public string <#= xElement.Attribute(key).Value#>{get {return ConfigurationManager.AppSettings[<#= string.Format("{0}{1}{2}","\"" , xElement.Attribute(key).Value, "\"")#>];}} <#}#> <# var connectionStrings = xDocument.Descendants("connectionStrings"); foreach(var connString in connectionStrings.Descendants()) {#> public string <#= connString.Attribute(name).Value#>{get {return ConfigurationManager.ConnectionStrings[<#= string.Format("{0}{1}{2}","\"" , connString.Attribute(name).Value, "\"")#>].ConnectionString;}} <#} #> }} The resulting .cs file: using System;using System.Configuration;using System.Xml;using System.Xml.Linq;using System.Linq;namespace MyProject.Web { public partial class Configurator { public string ClientValidationEnabled{get {return ConfigurationManager.AppSettings["ClientValidationEnabled"];}} public string UnobtrusiveJavaScriptEnabled{get {return ConfigurationManager.AppSettings["UnobtrusiveJavaScriptEnabled"];}} public string ServiceUri{get {return ConfigurationManager.AppSettings["ServiceUri"];}} public string TestConnection{get {return ConfigurationManager.ConnectionStrings["TestConnection"].ConnectionString;}} public string SecondTestConnection{get {return ConfigurationManager.ConnectionStrings["SecondTestConnection"].ConnectionString;}} }} Next, I extended the partial class for easy access to the Configuration. However, you could just use the generated class file itself. using System;using System.Linq;using System.Xml.Linq;namespace MyProject.Web{ public partial class Configurator { private static readonly Configurator Instance = new Configurator(); public static Configurator For { get { return Instance; } } }} Finally, in my example, I used the Configurator class like so: [TestMethod] public void Test_Web_Config() { var result = Configurator.For.ServiceUri; Assert.AreEqual(result, "http://localhost:30237/Service1/"); }

  Read the article

• Booting the liveCD/USB in EFI mode fails on Samsung Tablet XE700T1A

  - by F.L.

  My tablet is Samsung Series 7 Slate (XE700T1A-A02FR (French Language)). It operates an Intel Sandy Bridge architecture. The main issue about this tablet is that it ships with an installed Windows 7 in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. [2012-09-27] I have used the Ubuntu 12.04.1 Desktop ISO (I have read somewhere that it is the only one that can boot in EFI mode). I'd say this has something to do with UEFI since the LiveCD boots in bios mode but not in efi mode. Besides, I am not sure my boot info will help, since I can't boot the LiveCD in EFI mode. As a result I can't install ubuntu in EFI mode. So it would be the boot info from the liveCD boot in bios mode. This happens on a ubuntu-12.04.1-desktop-amd64 iso used on a LiveUSB. Live USB was created by dd'ing the iso onto the full disk device (i.e. /dev/sdx no number) of the Flash drive. I have also tried copying the LiveCD files on a primary GPT partition, but with no luck, I just get the grub shell, no menu, no install option. [2012-09-28] I tried today a flash drive created with Ubuntu's Startup Disk Creator and the alternate 12.04.1 64 bit ISO. I get a grub menu in text mode (which meens it did start in efi mode) with install options / test options. But when I start any of these, I simply get a black screen (no cursor, neither mouse nor text-mode cursor). I tried removing the 'quiet' option and adding nomodeset and acpi=off, but it didn't do any good. So this is the same result as for the LiveCD. [2012-10-01] I have tried with a version of the secure remix version via usb-creator-gtk. The boot on the USB key has the same symptoms. Boot in EFI mode is impossible (I have menu but whatever entry I choose, I get the blank screen problem). The boot in BIOS mode works, I did the install. Then I used boot-repair to try installing grub-efi and get a system that would boot in efi mode. But I can't boot this system, because the EFI firmware doesn't seem to detect that sda contains a valid efi partition. Here is the resulting boot-info Boot info 1253554 [2012-10-01] Today, I have reinstalled the pre-shipped version of windows 7, and then installed ubuntu from a secure-remix iso dumped on USB flash drive vie usb-creator-gtk booted in BIOS mode. When install ended, I said "continue testing" then I used boot-repair to try get the bootloader installed. Now, when I boot the tablet, I get the grub menu, it can chainload windows 7 flawlessly. But when I try to start one of the ubuntu options I get the same old blank screen. Here is the new boot-info: Boot info 1253927 [2012-10-01] I tried installing the 3.3 kernel by chrooting a live usb boot (secure remix again) into the installed system. Same symptoms. I feel the key to this is that the device's efi firmware (which is EFI v2.0) would expose the graphics hardware in a way that prevents the kernel to initialize it, and thus prevents it from booting (the kernel stops all drive access just after the screen turns kind of very dark purple). Here is some info on the UEFI firmware as given by rEFInd: EFI revision: 2.00 Platform: x86_64 (64 bit) Firmware: American Megatrends 4.635 Screen Output: Graphics Output (UEFI), 800x600 [2012-10-08] This week end I tried loading the kernel with elilo. Eventhough I didn't have more luck on booting the kernel, elilo gives more info when loading the kernel. I think the next step is trying to load a kernel with EFI stub directly.

  Read the article

• what is the best way to use loops to detect events while the main loop is running?

  - by yao jiang

  I am making an "game" that has pathfinding using pygame. I am using Astar algo. I have a main loop which draws the whole map. In the loop I check for events. If user press "enter" or "space", random start and end are selected, then animation starts and it will try to get from start to end. My draw function is stupid as hell right now, it works as expected but I feel that I am doing it wrong. It'll draw everything to the end of the animation. I am also detecting events in there as well. What is a better way of implementing the draw function such that it will draw one "step" at a time while checking for events? animating = False; while loop: check events: if not animating: # space or enter press will choose random start/end coords if enter_pressed or space_pressed: start, end = choose_coords route = find_route(start, end) draw(start, end, grid, route) else: # left click == generate an event to block the path # right click == user can choose a new destination if left_mouse_click: gen_event() reroute() elif right_mouse_click: new_end = new_end() new_start = current_pos() route = find_route(new_start, new_end) draw(new_start, new_end, grid, route) # draw out the grid def draw(start, end, grid, route_coord): # draw the end coords color = red; pick_image(screen, color, width*end[1],height*end[0]); pygame.display.flip(); # then draw the rest of the route for i in range(len(route_coord)): # pausing because we want animation time.sleep(speed); # get the x/y coords x,y = route_coord[i]; event_on = False; if grid[x][y] == 2: color = green; elif grid[x][y] == 3: color = blue; for event in pygame.event.get(): if event.type == pygame.MOUSEBUTTONDOWN: if event.button == 3: print "destination change detected, rerouting"; # get mouse position, px coords pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; grid[r][c] = 4; end = [r, c]; elif event.button == 1: print "user generated event"; pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; # mark it as a block for now grid[r][c] = 1; event_on = True; if check_events([x,y]) or event_on: # there is an event # mark it as a block for now grid[y][x] = 1; pick_image(screen, event_x, width*y, height*x); pygame.display.flip(); # then find a new route new_start = route_coord[i-1]; marked_grid, route_coord = find_route(new_start, end, grid); draw(new_start, end, grid, route_coord); return; # just end draw here so it wont throw the "index out of range" error elif grid[x][y] == 4: color = red; pick_image(screen, color, width*y, height*x); pygame.display.flip(); # clear route coord list, otherwise itll just add more unwanted coords route_coord_list[:] = [];

  Read the article

• Selecting the correct installer to install Oracle Weblogic Server

  - by PratikS -- Oracle

  When ever we start learning about a software product, the first step is to get the software installer and install it.Before we start with "How to install Oracle Weblogic Server?", lets understand the different kinds of installers available for Oracle Weblogic Server and select the correct installer.There are three different kinds of Weblogic server Installers: Package Installer Development-only and supplemental installers Upgrade Installer 1) Package Installer: If you have never installed Oracle Weblogic Server and this is the first time you are installing it, then what you need is a Oracle Weblogic Server's Package Installer.Again there are two different kinds of Package Installers:    a) Generic Package installer:         It does not include JAVA runtime. (When using "Generic Package installer" it is a prerequisite that a supported JDK should be installed)         If you want to install weblogic server with 64bit JVM, you have to use "Generic Package installer".         "Generic Package installer" is platform independent and can be used to install weblogic server on any supported 32bit or 64bit platform.     b) OS-specific Package installer         As the name suggests the installer is platform specific.         It is meant for installation with a 32bit JVM only.         Both SUN and JROCKIT 32 bit JDKs come bundled with "OS-specific Package installer", so no need to install the JDK in advance. 2) Development-only and supplemental installers:         If you have no plans to use the Oracle Weblogic Server in Production and need a simple installer for testing purpose only, then use this installer.         Download the zip distribution, unzip it and its ready to use. 3) Upgrade Installer:         Upgrade installer is used to upgrade a Oracle Weblogic Server installation from one minor version to a higher minor version.         There are no installers available to upgrade Oracle Weblogic Server Installation from one major version to another, though Domain Upgrade is always available. Note:Following are the different versions of Oracle Weblogic Server in ascending order(excluding versions before WLS 9.2): WLS 9.2.x WLS 10.0.x WLS 10.3.x WLS 12.1.x Where "x" denotes the minor version, 9.2, 10.0,10.3 and 12.1 are the major versions.So you may use the upgrade installer to upgrade from WLS 10.3.1 to 10.3.6, or 10.0.1 to 10.0.2 etc.  ------------------------------------- Important links to refer: Oracle Weblogic Server Documentation Supported Configuration Installation Guide for Oracle WebLogic Server

  Read the article

• Comparing Isis, Google, and Paypal

  - by David Dorf

  Back in 2010 I was sure NFC would make great strides, but here we are two years later and NFC doesn't seem to be sticking. The obvious reason being the chicken-and-egg problem.  Retailers don't want to install the terminals until the phones support NFC, and vice-versa. So consumers continue to sit on the sidelines waiting for either side to blink and make the necessary investment.  In the meantime, EMV is looking for a way to sneak into the US with the help of the card brands. There are currently three major solutions that are battling in the marketplace.  All three know that replacing mag-stripe alone is not sufficient to move consumers.  Long-term it's the offers and loyalty programs combined with tendering that make NFC attractive. NFC solutions cross lots of barriers, so a strong partner system is required.  The solutions need to include the carriers, card brands, banks, handset manufacturers, POS terminals, and most of all lots of merchants.  Lots of coordination is necessary to make the solution seamless to the consumer. Google Wallet Google's problem has always been that only the Nexus phone has an NFC chip that supports their wallet.  There are a couple of additional phones out there now, but adoption is still slow.  They acquired Zavers a while back to incorporate digital coupons, but the the bulk of their users continue to be non-NFC.  They have taken an open approach by not specifying particular payment brands.  Google is piloting in San Francisco and New York, supporting both MasterCard PayPass and stored value. I suppose the other card brands may eventually follow.  There's no cost for consumers or merchants -- Google will make money via targeted ads. Isis Not long after Google announced its wallet, AT&T, Verizon, and T-Mobile announced a joint venture called Isis.  They are in the unique position of owning the SIM in the phones they issue.  At first it seemed Isis was a vehicle for the carriers to compete with the existing card brands, but Isis later switched to a generic wallet that supports the major card brands.  Isis reportedly charges issuers a $5 fee per customer per year.  Isis will pilot this summer in Salt Lake City and Austin. PayPal PayPal, the clear winner in the online payment space beyond traditional credit cards, is trying to move into physical stores.  After negotiations with Google to provide a wallet broke off, PayPal decided to avoid NFC altogether, at least for now, and focus on payments without any physical card or phone.  By avoiding NFC, consumers don't need an NFC-enabled phone and merchants don't need a new reader.  Consumers must enter their phone number and PIN in the merchant's existing device, or they can enter their PIN in the PayPal inStore app running on their phone, then show the merchant a unique barcode which authorizes payment. Paypal is free for consumers and charges a fee for merchants.  Its not clear, at least to me, how PayPal handles fraudulent transactions and whether the consumer is protected. The wildcard is, of course, Apple.  Their mobile technologies set the standard, so incorporating NFC chips would certainly accelerate adoption of many payment solutions.  Their announcement today of the iOS Passbook is a step in the right direction, but stops short of handling payments. For those retailers that have invested in modern terminals, it seems the best strategy is to support all the emerging solutions and let the consumers choose the winner.

  Read the article

• Logging errors caused by exceptions deep in the application

  - by Kaleb Pederson

  What are best-practices for logging deep within an application's source? Is it bad practice to have multiple event log entries for a single error? For example, let's say that I have an ETL system whose transform step involves: a transformer, pipeline, processing algorithm, and processing engine. In brief, the transformer takes in an input file, parses out records, and sends the records through the pipeline. The pipeline aggregates the results of the processing algorithm (which could do serial or parallel processing). The processing algorithm sends each record through one or more processing engines. So, I have at least four levels: Transformer - Pipeline - Algorithm - Engine. My code might then look something like the following: class Transformer { void Process(InputSource input) { try { var inRecords = _parser.Parse(input.Stream); var outRecords = _pipeline.Transform(inRecords); } catch (Exception ex) { var inner = new ProcessException(input, ex); _logger.Error("Unable to parse source " + input.Name, inner); throw inner; } } } class Pipeline { IEnumerable<Result> Transform(IEnumerable<Record> records) { // NOTE: no try/catch as I have no useful information to provide // at this point in the process var results = _algorithm.Process(records); // examine and do useful things with results return results; } } class Algorithm { IEnumerable<Result> Process(IEnumerable<Record> records) { var results = new List<Result>(); foreach (var engine in Engines) { foreach (var record in records) { try { engine.Process(record); } catch (Exception ex) { var inner = new EngineProcessingException(engine, record, ex); _logger.Error("Engine {0} unable to parse record {1}", engine, record); throw inner; } } } } } class Engine { Result Process(Record record) { for (int i=0; i<record.SubRecords.Count; ++i) { try { Validate(record.subRecords[i]); } catch (Exception ex) { var inner = new RecordValidationException(record, i, ex); _logger.Error( "Validation of subrecord {0} failed for record {1}", i, record ); } } } } There's a few important things to notice: A single error at the deepest level causes three log entries (ugly? DOS?) Thrown exceptions contain all important and useful information Logging only happens when failure to do so would cause loss of useful information at a lower level. Thoughts and concerns: I don't like having so many log entries for each error I don't want to lose important, useful data; the exceptions contain all the important but the stacktrace is typically the only thing displayed besides the message. I can log at different levels (e.g., warning, informational) The higher level classes should be completely unaware of the structure of the lower-level exceptions (which may change as the different implementations are replaced). The information available at higher levels should not be passed to the lower levels. So, to restate the main questions: What are best-practices for logging deep within an application's source? Is it bad practice to have multiple event log entries for a single error?

  Read the article

• Five Key Trends in Enterprise 2.0 for 2011

  - by kellsey.ruppel(at)oracle.com

  We recently sat down with Andy MacMillan, an industry veteran and vice president of product management for Enterprise 2.0 at Oracle, to get his take on the year ahead in Enterprise 2.0 (E2.0). He offered us his five predictions about the ways he believes E2.0 technologies will transform business in 2011. 1. Forward-thinking organizations will achieve an unprecedented level of organizational awareness. Enterprise 2.0 and Web 2.0 technologies have already transformed the ways customers, employees, partners, and suppliers communicate and stay informed. But this year we are anticipating that organizations will go to the next step and integrate social activities with business applications to deliver rich contextual "activity streams." Activity streams are a new way for enterprise users to get relevant information as quickly as it happens, by navigating to that information in context directly from their portal. We don't mean syndicating social activities limited to a single application. Instead, we believe back-office systems will be combined with social media tools to drive how users make informed business decisions in brand new ways. For example, an account manager might log into the company portal and automatically receive notification that colleagues are closing business around a certain product in his market segment. With a single click, he can reach out instantly to these colleagues via social media and learn from their successes to drive new business opportunities in his own area. 2. Online customer engagement will become a high priority for CMOs. A growing number of chief marketing officers (CMOs) have created a new direct report called "head of online"--a senior marketing executive responsible for all engagements with customers and prospects via the Web, mobile, and social media. This new field has been dubbed "Web experience management" or "online customer engagement" by firms and analyst organizations. It is likely to rapidly increase demand for a host of new business objectives and metrics from Web content management solutions. As companies interface with customers more and more over the Web, Web experience management solutions will help deliver more targeted interactions to ensure increased customer loyalty while meeting sales and business objectives. 3. Real composite applications will be widely adopted. We expect organizations to move from the concept of a single "uber-portal" that encompasses all the necessary features to a more modular, component-based concept for composite applications. This approach is now possible as IT and power users are empowered to assemble new, purpose-built composite applications quickly from existing components. 4. Records management will drive ECM consolidation. We continue to see a significant shift in the approach to records management. Several years ago initiatives were focused on overlaying records management across a set of electronic repositories and physical storage locations. We believe federated records management will continue, but we also expect to see records management driving conversations around single-platform content management consolidation. 5. Organizations will demand ECM at extreme scale. We have already seen a trend within IT organizations to provide a common, highly scalable infrastructure to consolidate and support content and information needs. But as data sizes grow exponentially, ECM at an extreme scale is likely to spread at unprecedented speeds this year. This makes sense as regulations and transparency requirements rise. The model in which ECM and lightweight CMS systems provide basic content services such as check-in, update, delete, and search has converged around a set of industry best practices and has even been coded into new industry standards such as content management interoperability services. As these services converge and the demand for them accelerates, organizations are beginning to rationalize investments into a single, highly scalable infrastructure. Is your organization ready for Enterprise 2.0 in 2011? Learn more.

  Read the article

• Talking JavaOne with Rock Star Kirk Pepperdine

  - by Janice J. Heiss

  Kirk Pepperdine is not only a JavaOne Rock Star but a Java Champion and a highly regarded expert in Java performance tuning who works as a consultant, educator, and author. He is the principal consultant at Kodewerk Ltd. He speaks frequently at conferences and co-authored the Ant Developer's Handbook. In the rapidly shifting world of information technology, Pepperdine, as much as anyone, keeps up with what's happening with Java performance tuning. Pepperdine will participate in the following sessions: CON5405 - Are Your Garbage Collection Logs Speaking to You? BOF6540 - Java Champions and JUG Leaders Meet Oracle Executives (with Jeff Genender, Mattias Karlsson, Henrik Stahl, Georges Saab) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Ellen Kraffmiller Martijn Verburg, Jeff Genender, and Henri Tremblay) I asked him what technological changes need to be taken into account in performance tuning. “The volume of data we're dealing with just seems to be getting bigger and bigger all the time,” observed Pepperdine. “A couple of years ago you'd never think of needing a heap that was 64g, but today there are deployments where the heap has grown to 256g and tomorrow there are plans for heaps that are even larger. Dealing with all that data simply requires more horse power and some very specialized techniques. In some cases, teams are trying to push hardware to the breaking point. Under those conditions, you need to be very clever just to get things to work -- let alone to get them to be fast. We are very quickly moving from a world where everything happens in a transaction to one where if you were to even consider using a transaction, you've lost." When asked about the greatest misconceptions about performance tuning that he currently encounters, he said, “If you have a performance problem, you should start looking at code at the very least and for that extra step, whip out an execution profiler. I'm not going to say that I never use execution profilers or look at code. What I will say is that execution profilers are effective for a small subset of performance problems and code is literally the last thing you should look at.And what is the most exciting thing happening in the world of Java today? “Interesting question because so many people would say that nothing exciting is happening in Java. Some might be disappointed that a few features have slipped in terms of scheduling. But I'd disagree with the first group and I'm not so concerned about the slippage because I still see a lot of exciting things happening. First, lambda will finally be with us and with lambda will come better ways.” For JavaOne, he is proctoring for Heinz Kabutz's lab. “I'm actually looking forward to that more than I am to my own talk,” he remarked. “Heinz will be the third non-Sun/Oracle employee to present a lab and the first since Oracle began hosting JavaOne. He's got a great message. He's spent a ton of time making sure things are going to work, and we've got a great team of proctors to help out. After that, getting my talk done, the Java Champion's panel session and then kicking back and just meeting up and talking to some Java heads."Finally, what should Java developers know that they currently do not know? “’Write Once, Run Everywhere’ is a great slogan and Java has come closer to that dream than any other technology stack that I've used. That said, different hardware bits work differently and as hard as we try, the JVM can't hide all the differences. Plus, if we are to get good performance we need to work with our hardware and not against it. All this implies that Java developers need to know more about the hardware they are deploying to.”

  Read the article

• Lead, Follow, or Get out of the way

  - by Daniel Moth

  This is one of the sayings (attributed to Thomas Paine) that totally resonated with me from the first time I heard it, which was only 3 years ago during some training course at work: "Lead, Follow, or Get out of the way" You'll find many books with this title and you'll find it quoted by politicians and other leaders in various countries at various times... the quote is open to interpretation and works on many levels. To set the tone of what this means to me, I'll use a simple micro example: In any given conversation, you are either leading it or following it, at different times/snapshots of the conversation. If you are not willing or able to lead it, and you are not willing or able to follow it, then you should depart. The bad alternative which this guidance encourages you NOT to do is to stick around and obstruct progress by not following, not leading, and simply complaining or trying to derail the discussion in no particular direction. The same pattern applies at your position/role at work. Either follow your management/leadership team, or try to lead them to what you think is a better place, or change jobs. Don't stick around complaining about the direction things are going, while not actively trying to either change things or make peace with it. In the previous paragraph you can replace the word "your management" with "the people reporting to you" and the guidance still holds. Either lead your direct reports to where you think they should go, or follow their lead, or change jobs. Complaining about folks not taking direction while doing nothing is not a maintainable state. To me this quote is not about a permanent state, it is not about some people always leading and some always following: It is about a role/hat that anybody can play/wear at any given moment. One minute I am leading you, the next I am following you, and the next we are both following someone else and so on... When there is disagreement, debate the different directions for as long as it takes for you to be comfortable that you can either follow or lead. If you don't become comfortable with either of those, get out of the way. Something to remember is that it is impossible to learn how to lead well, without learning how to follow well (probably deserves its own blog entry)... Things go wrong when someone thinks that they must always be leading, or when everybody wants to follow and nobody steps up to lead... Things go wrong when more than one person wants to lead and they don't try to reach agreement on a shared direction, stubbornly sticking to their guns pulling the rest of the team in multiple directions... Things go wrong when more than one person wants to lead and after numerous and lengthy discussions, none of them decides to follow or get out of the way... Things go wrong when people don't want to lead, don't want to follow, and insist on sticking around... While there are a few ways things that can go wrong as enumerated in the previous paragraph, the most common one in my experience is the last one I mentioned. You'll recognize these folks as the ones that always complain about everything that is wrong with their company/product but do nothing about it. Every time you hear someone giving feedback on how something is wrong or suboptimal, ask them "So now that you identified the problem, what do you think the solution is and what are you doing to drive us to that solution?" The next time things start going wrong, step up and remind everyone: Lead, Follow, or Get out of the way. For more perspectives, and for input to help you form your own interpretation, search the web for this phrase to see in what contexts it is being used (bing, google). Finally, regardless of your political views, I hope you can appreciate if only as an example this perspective of someone leading by actually getting out of the way. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Programmatically Making the Selected OutlineView Cell Editable

  - by Geertjan

  When you're using the OutlineView and you use the Tab key to move through its cells, the cells are shown to be selected, as below: However, until you press the Space key in the selected cell, or until you click the mouse within it, you cannot edit it. That's extremely annoying when you're creating a data-entry application. Your user would like to begin editing a cell as soon as they have tabbed into it. Needing to press Space first, or click the mouse in the cell first, is a cumbersome additional step that completely destroys your work flow. Below, you can see that an editable cell looks very different to one that is merely selected: I.e., now I can type and the text changes. How to set up the OutlineView so that the Tab key makes the selected cell editable? Here's the constructor of the TopComponent you see above: public ViewerTopComponent() {     initComponents();     setName(Bundle.CTL_ViewerTopComponent());     setToolTipText(Bundle.HINT_ViewerTopComponent());     setLayout(new BorderLayout());     OutlineView ov = new OutlineView();     final Outline outline = ov.getOutline();     outline.setRootVisible(false);     //When column selection changes, e.g., via Tab key,     //programmatically start editing the cell:     ListSelectionListener listSelectionListener = new ListSelectionListener() {         @Override         public void valueChanged(ListSelectionEvent e) {             int row = outline.getSelectedRow();             int column = outline.getSelectedColumn();             //Ignore the node column:             if (row > -1 && row > -1) {                 outline.editCellAt(row, column);             }         }     };     outline.getColumnModel().getSelectionModel().addListSelectionListener(listSelectionListener);     ov.setPropertyColumns(             "city", "City", "state", "State");     add(ov, BorderLayout.CENTER);     em.setRootContext(             new AbstractNode(Children.create(new CustomerChildFactory(), true)));     associateLookup(ExplorerUtils.createLookup(em, getActionMap())); }

  Read the article

< Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >