Search Results

Search found 6425 results on 257 pages for 'master man'.

Page 249/257 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >

• Bind: dns not 'spreaded'

  - by realtebo

  I've elfoip.net with bind $ whois elfoip.net | grep 'Name Server' Name Server: NS.ELFOIP.NET I need elfoip.net be able to serve third levels domain, like mickymouse.elfoip.net, etc... Yes, I'm trying to create an other useless dyndns clone. i've added some third level as A RR. Eg: executing this from the server itself $ dig @localhost mattinauno.elfoip.net ;; ANSWER SECTION: mattinauno.elfoip.net. 60 IN A 192.81.221.113 I was expecting in one or two days, from my pc i can digit in browser mattinauno.elfoip.net and get page a 192.81.221.113 But this is not happening. Are there any prerequisites to satisfy to allow dns of my isp to be able to forward dns resolution of *.elfoip.net to MY dns ? (Or to ask to him and then cache ?) TTL of zone is set a 5m I've not AllowQuey directive, is it necessary for other dns to cache from mine ? I've cheched the zone with bind utility named-checkzone but no error detected. How to diagnose why other dns doesn't take in account RR from mine ? from my home pc dig @ns.elfoip.net mattinauno.elfoip.net ;; ANSWER SECTION: mattinauno.elfoip.net. 60 IN A 192.81.221.113 ;; AUTHORITY SECTION: elfoip.net. 300 IN NS ns.elfoip.net. but dig @8.8.8.8 mattinauno.elfoip.net give no answers Whole zone file: note I've used nsupdate, so this file has been re-edited and re-formatted from this utility ! root@mirko:/var/named# cat elfoip.net.db $ORIGIN . $TTL 300 ; 5 minutes elfoip.net IN SOA ns.elfoip.net. hostmaster.elfoip.net. ( 2013062314 ; serial 3600 ; refresh (1 hour) 600 ; retry (10 minutes) 86400 ; expire (1 day) 60 ; minimum (1 minute) ) NS ns.elfoip.net. A 109.168.99.6 $ORIGIN elfoip.net. $TTL 60 ; 1 minute google A 173.194.35.56 maiscai A 192.81.221.113 mattinadue A 192.81.221.113 mattinauno A 192.81.221.113 $TTL 300 ; 5 minutes ns A 109.168.99.6 $TTL 60 ; 1 minute prova A 208.67.222.222 prova2 A 13.23.34.45 A 13.23.34.46 www CNAME elfoip.net. EDIT: added named.conf.local zone "elfoip.net" { type master; // file "/etc/bind/elfoip.net.db"; file "/var/named/elfoip.net.db"; allow-update { key elfoip.net ; }; }; EDIT: I've no setup list-on directive *EDIT Added a TCPDUMP after [email protected] wwww.elfoip.net from a machine which uses my company internal dns, who allow recursive query. root@mirko:~# tcpdump -i eth0 'port 53' tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 11:57:23.293611 IP host9-210-static.22-87-b.business.telecomitalia.it.45958 > mirko.elfoip.net.domain: 61337+ A? www.elfoip.net. (32) 11:57:23.294114 IP mirko.elfoip.net.domain > host9-210-static.22-87-b.business.telecomitalia.it.45958: 61337* 2/1/1 CNAME elfoip.net., A 109.168.99.6 (95) 11:57:23.294554 IP mirko.elfoip.net.59571 > google-public-dns-a.google.com.domain: 45851+ PTR? 9.210.22.87.in-addr.arpa. (42) 11:57:23.330444 IP google-public-dns-a.google.com.domain > mirko.elfoip.net.59571: 45851 1/0/0 PTR host9-210-static.22-87-b.business.telecomitalia.it. (106) 11:57:23.331181 IP mirko.elfoip.net.44171 > google-public-dns-a.google.com.domain: 33339+ PTR? 8.8.8.8.in-addr.arpa. (38) 11:57:23.439405 IP google-public-dns-a.google.com.domain > mirko.elfoip.net.44171: 33339 1/0/0 PTR google-public-dns-a.google.com. (82) 11:57:31.350654 IP host9-210-static.22-87-b.business.telecomitalia.it.30108 > mirko.elfoip.net.domain: 38269 [1au] A? ns.elfoip.net. (42) 11:57:31.351117 IP mirko.elfoip.net.domain > host9-210-static.22-87-b.business.telecomitalia.it.30108: 38269* 1/1/1 A 109.168.99.6 (72) If i dig @8.8.8.8 www.elfoip.net, NOTHING happens in dump log !

  Read the article

• How to generate a Program template by generating an abstract class

  - by Byron-Lim Timothy Steffan

  i have the following problem. The 1st step is to implement a program, which follows a specific protocol on startup. Therefore, functions as onInit, onConfigRequest, etc. will be necessary. (These are triggered e.g. by incoming message on a TCP Port) My goal is to generate a class for example abstract one, which has abstract functions as onInit(), etc. A programmer should just inherit from this base class and should merely override these abstract functions of the base class. The rest as of the protocol e.g. should be simply handled in the background (using the code of the base class) and should not need to appear in the programmers code. What is the correct design strategy for such tasks? and how do I deal with, that the static main method is not inheritable? What are the key-tags for this problem? (I have problem searching for a solution since I lack clear statements on this problem) Goal is to create some sort of library/class, which - included in ones code - results in executables following the protocol. EDIT (new explanation): Okay let me try to explain more detailled: In this case programs should be clients within a client server architecture. We have a client server connection via TCP/IP. Each program needs to follow a specific protocol upon program start: As soon as my program starts and gets connected to the server it will receive an Init Message (TcpClient), when this happens it should trigger the function onInit(). (Should this be implemented by an event system?) After onInit() a acknowledgement message should be sent to the server. Afterwards there are some other steps as e.g. a config message from the server which triggers an onConfig and so on. Let's concentrate on the onInit function. The idea is, that onInit (and onConfig and so on) should be the only functions the programmer should edit while the overall protocol messaging is hidden for him. Therefore, I thought using an abstract class with the abstract methods onInit(), onConfig() in it should be the right thing. The static Main class I would like to hide, since within it e.g. there will be some part which connects to the tcp port, which reacts on the Init Message and which will call the onInit function. 2 problems here: 1. the static main class cant be inherited, isn it? 2. I cannot call abstract functions from the main class in the abstract master class. Let me give an Pseudo-example for my ideas: public abstract class MasterClass { static void Main(string[] args){ 1. open TCP connection 2. waiting for Init Message from server 3. onInit(); 4. Send Acknowledgement, that Init Routine has ended successfully 5. waiting for Config message from server 6..... } public abstract void onInit(); public abstract void onConfig(); } I hope you get the idea now! The programmer should afterwards inherit from this masterclass and merely need to edit the functions onInit and so on. Is this way possible? How? What else do you recommend for solving this? EDIT: The strategy ideo provided below is a good one! Check out my comment on that.

  Read the article

• Design Question - how do you break the dependency between classes using an interface?

  - by Seth Spearman

  Hello, I apologize in advance but this will be a long question. I'm stuck. I am trying to learn unit testing, C#, and design patterns - all at once. (Maybe that's my problem.) As such I am reading the Art of Unit Testing (Osherove), and Clean Code (Martin), and Head First Design Patterns (O'Reilly). I am just now beginning to understand delegates and events (which you would see if you were to troll my SO questions of recent). I still don't quite get lambdas. To contextualize all of this I have given myself a learning project I am calling goAlarms. I have an Alarm class with members you'd expect (NextAlarmTime, Name, AlarmGroup, Event Trigger etc.) I wanted the "Timer" of the alarm to be extensible so I created an IAlarmScheduler interface as follows... public interface AlarmScheduler { Dictionary<string,Alarm> AlarmList { get; } void Startup(); void Shutdown(); void AddTrigger(string triggerName, string groupName, Alarm alarm); void RemoveTrigger(string triggerName); void PauseTrigger(string triggerName); void ResumeTrigger(string triggerName); void PauseTriggerGroup(string groupName); void ResumeTriggerGroup(string groupName); void SetSnoozeTrigger(string triggerName, int duration); void SetNextOccurrence (string triggerName, DateTime nextOccurrence); } This IAlarmScheduler interface define a component that will RAISE an alarm (Trigger) which will bubble up to my Alarm class and raise the Trigger Event of the alarm itself. It is essentially the "Timer" component. I have found that the Quartz.net component is perfectly suited for this so I have created a QuartzAlarmScheduler class which implements IAlarmScheduler. All that is fine. My problem is that the Alarm class is abstract and I want to create a lot of different KINDS of alarm. For example, I already have a Heartbeat alarm (triggered every (int) interval of minutes), AppointmentAlarm (triggered on set date and time), Daily Alarm (triggered every day at X) and perhaps others. And Quartz.NET is perfectly suited to handle this. My problem is a design problem. I want to be able to instantiate an alarm of any kind without my Alarm class (or any derived classes) knowing anything about Quartz. The problem is that Quartz has awesome factories that return just the right setup for the Triggers that will be needed by my Alarm classes. So, for example, I can get a Quartz trigger by using TriggerUtils.MakeMinutelyTrigger to create a trigger for the heartbeat alarm described above. Or TriggerUtils.MakeDailyTrigger for the daily alarm. I guess I could sum it up this way. Indirectly or directly I want my alarm classes to be able to consume the TriggerUtils.Make* classes without knowing anything about them. I know that is a contradiction, but that is why I am asking the question. I thought about putting a delegate field into the alarm which would be assigned one of these Make method but by doing that I am creating a hard dependency between alarm and Quartz which I want to avoid for both unit testing purposes and design purposes. I thought of using a switch for the type in QuartzAlarmScheduler per here but I know it is bad design and I am trying to learn good design. If I may editorialize a bit. I've decided that coding (predefined) classes is easy. Design is HARD...in fact, really hard and I am really fighting feeling stupid right now. I guess I want to know if you really smart people took a while to really understand and master this stuff or should I feel stupid (as I do) because I haven't grasped it better in the couple of weeks/months I have been studying. You guys are awesome and thanks in advance for your answers. Seth

  Read the article

• Problem measuring N times the execution time of a code block

  - by Nazgulled

  EDIT: I just found my problem after writing this long post explaining every little detail... If someone can give me a good answer on what I'm doing wrong and how can I get the execution time in seconds (using a float with 5 decimal places or so), I'll mark that as accepted. Hint: The problem was on how I interpreted the clock_getttime() man page. Hi, Let's say I have a function named myOperation that I need to measure the execution time of. To measure it, I'm using clock_gettime() as it was recommend here in one of the comments. My teacher recommends us to measure it N times so we can get an average, standard deviation and median for the final report. He also recommends us to execute myOperation M times instead of just one. If myOperation is a very fast operation, measuring it M times allow us to get a sense of the "real time" it takes; cause the clock being used might not have the required precision to measure such operation. So, execution myOperation only one time or M times really depends if the operation itself takes long enough for the clock precision we are using. I'm having trouble dealing with that M times execution. Increasing M decreases (a lot) the final average value. Which doesn't make sense to me. It's like this, on average you take 3 to 5 seconds to travel from point A to B. But then you go from A to B and back to A 5 times (which makes it 10 times, cause A to B is the same as B to A) and you measure that. Than you divide by 10, the average you get is supposed to be the same average you take traveling from point A to B, which is 3 to 5 seconds. This is what I want my code to do, but it's not working. If I keep increasing the number of times I go from A to B and back A, the average will be lower and lower each time, it makes no sense to me. Enough theory, here's my code: #include <stdio.h> #include <time.h> #define MEASUREMENTS 1 #define OPERATIONS 1 typedef struct timespec TimeClock; TimeClock diffTimeClock(TimeClock start, TimeClock end) { TimeClock aux; if((end.tv_nsec - start.tv_nsec) < 0) { aux.tv_sec = end.tv_sec - start.tv_sec - 1; aux.tv_nsec = 1E9 + end.tv_nsec - start.tv_nsec; } else { aux.tv_sec = end.tv_sec - start.tv_sec; aux.tv_nsec = end.tv_nsec - start.tv_nsec; } return aux; } int main(void) { TimeClock sTime, eTime, dTime; int i, j; for(i = 0; i < MEASUREMENTS; i++) { printf(" » MEASURE %02d\n", i+1); clock_gettime(CLOCK_REALTIME, &sTime); for(j = 0; j < OPERATIONS; j++) { myOperation(); } clock_gettime(CLOCK_REALTIME, &eTime); dTime = diffTimeClock(sTime, eTime); printf(" - NSEC (TOTAL): %ld\n", dTime.tv_nsec); printf(" - NSEC (OP): %ld\n\n", dTime.tv_nsec / OPERATIONS); } return 0; } Notes: The above diffTimeClock function is from this blog post. I replaced my real operation with myOperation() because it doesn't make any sense to post my real functions as I would have to post long blocks of code, you can easily code a myOperation() with whatever you like to compile the code if you wish. As you can see, OPERATIONS = 1 and the results are: » MEASURE 01 - NSEC (TOTAL): 27456580 - NSEC (OP): 27456580 For OPERATIONS = 100 the results are: » MEASURE 01 - NSEC (TOTAL): 218929736 - NSEC (OP): 2189297 For OPERATIONS = 1000 the results are: » MEASURE 01 - NSEC (TOTAL): 862834890 - NSEC (OP): 862834 For OPERATIONS = 10000 the results are: » MEASURE 01 - NSEC (TOTAL): 574133641 - NSEC (OP): 57413 Now, I'm not a math wiz, far from it actually, but this doesn't make any sense to me whatsoever. I've already talked about this with a friend that's on this project with me and he also can't understand the differences. I don't understand why the value is getting lower and lower when I increase OPERATIONS. The operation itself should take the same time (on average of course, not the exact same time), no matter how many times I execute it. You could tell me that that actually depends on the operation itself, the data being read and that some data could already be in the cache and bla bla, but I don't think that's the problem. In my case, myOperation is reading 5000 lines of text from an CSV file, separating the values by ; and inserting those values into a data structure. For each iteration, I'm destroying the data structure and initializing it again. Now that I think of it, I also that think that there's a problem measuring time with clock_gettime(), maybe I'm not using it right. I mean, look at the last example, where OPERATIONS = 10000. The total time it took was 574133641ns, which would be roughly 0,5s; that's impossible, it took a couple of minutes as I couldn't stand looking at the screen waiting and went to eat something.

  Read the article

• Templates and inheritance

  - by mariusz

  Hello, I have a big problem. I use additional controls for Wpf. One of them is Telerik RadWindow This control is already templated. Now I want to create custom Window with will inherit from RadWindow, and make custom template, eg. One base window will contains grid and two buttons, second base window will contain two grids (master - detail). The problem is that templates do not support inheritance. Perhaps is another way to template only the content of Winodow? My code, that doesn't work (empty window appears, so template doesn't apply) <Style TargetType="{x:Type local:TBaseRjWindow}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type local:TBaseRjContent}"> <Border Background="{TemplateBinding Background}" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}"> <Grid Name="mGrid"> <Grid.ColumnDefinitions> <ColumnDefinition /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition /> <RowDefinition MaxHeight="40" MinHeight="30" /> <RowDefinition MaxHeight="40" MinHeight="30" /> <RowDefinition Height="Auto" /> <RowDefinition MaxHeight="40" MinHeight="30" /> </Grid.RowDefinitions> <telerik:RadGridView Margin="10,10,10,10" Name="grid" Grid.Row="0" Grid.Column="0" VerticalAlignment="Stretch" HorizontalAlignment="Stretch" ScrollMode="Deferred" AutoGenerateColumns="False" Width="Auto" > </telerik:RadGridView> <telerik:RadDataPager Grid.Row="1" Grid.Column="0" x:Name="radDataPager" PageSize="50" AutoEllipsisMode="None" DisplayMode="First, Previous, Next, Text" Margin="10,0,10,0"/> <StackPanel Grid.Row="1" Grid.Column="0" Margin="5 5 5 5" HorizontalAlignment="Left" Orientation="Horizontal" Height="20" Width="Auto" VerticalAlignment="Center" > <telerik:RadButton x:Name="btAdd" Margin="5 0 5 0" Content="Dodaj" /> <telerik:RadButton x:Name="btEdit" Margin="5 0 5 0" Content="Edytuj" /> <telerik:RadButton x:Name="btDelete" Margin="5 0 5 0" Content="Usun" /> </StackPanel> <StackPanel Name="addFields" Background="LightGray" Visibility="Collapsed" VerticalAlignment="Top" Grid.Row="2" Grid.Column="0" Width="Auto" Height="Auto" Orientation="Horizontal"> <GroupBox Header="Szczegoly" Margin="2 2 2 2" > <Grid VerticalAlignment="Top" DataContext="{Binding SelectedItem, ElementName=grid}" Name="_gAddFields" Margin="0 0 0 0" Width="Auto" Height="Auto" > </Grid> </GroupBox> </StackPanel> <StackPanel Grid.Row="3" Grid.Column="0" Margin="5 5 5 5" HorizontalAlignment="Right" Orientation="Horizontal" Height="25" Width="Auto" VerticalAlignment="Center" > <telerik:RadButton x:Name="btSave" IsDefault="True" Width="60" Margin="5 0 5 0" Content="Zapisz" /> <telerik:RadButton x:Name="btOK" IsDefault="True" Width="60" Margin="5 0 5 0" Content="Akceptuj" /> <telerik:RadButton x:Name="btCancel" IsCancel="True" Width="60" Margin="5 0 5 0" Content="Anuluj" /> </StackPanel> </Grid> </Border> </ControlTemplate> </Setter.Value> </Setter> </Style> Please help

  Read the article

• Difference between SQL 2005 and SQL 2008 for inserting multiple rows with XML

  - by Sam Dahan

  I am using the following SQL code for inserting multiple rows of data in a table. The data is passed to the stored procedure using an XML variable : INSERT INTO MyTable SELECT SampleTime = T.Item.value('SampleTime[1]', 'datetime'), Volume1 = T.Item.value('Volume1[1]', 'float'), Volume2 = T.Item.value('Volume2[1]', 'float') FROM @xml.nodes('//Root/MyRecord') T(item) I have a whole bunch of unit tests to verify that I am inserting the right information, the right number of records, etc.. when I call the stored procedure. All fine and dandy - that is, until we began to monkey around with the compatibility level of the database. The code above worked beautifully as long as we kept the compatibility level of the DB at 90 (SQL 2005). When we set the compatibility level at 100 (SQL 2008), the unit tests failed, because the stored procedure using the code above times out. The unit tests are dropping the database, re-creating it from scripts, and running the tests on the brand new DB, so it's not - I think - a question of the 'old compatibility level' sticking around. Using the SQL Management studio, I made up a quick test SQL script. Using the same XML chunk, I alter the DB compat level , truncate the table, then use the code above to insert 650 rows. When the level is 90 (SQL 2005), it runs in milliseconds. When the level is 100 (SQL 2008) it sometimes takes over a minute, sometimes runs in milliseconds. I'd appreciate any insight anyone might have into that. EDIT The script takes over a minute to run with my actual data, which has more rows than I show here, is a real table, and has an index. With the following example code, the difference goes between milliseconds and around 5 seconds. --use [master] --ALTER DATABASE MyDB SET compatibility_level =100 use [MyDB] declare @xml xml set @xml = '<?xml version="1.0"?> <Root xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Record> <SampleTime>2009-01-24T00:00:00</SampleTime> <Volume1>0</Volume1> <Volume2>0</Volume2> </Record> ..... 653 records, sample time spaced out 4 hours ........ </Root>' DECLARE @myTable TABLE( ID int IDENTITY(1,1) NOT NULL, [SampleTime] [datetime] NOT NULL, [Volume1] [float] NULL, [Volume2] [float] NULL) INSERT INTO @myTable select T.Item.value('SampleTime[1]', 'datetime') as SampleTime, Volume1 = T.Item.value('Volume1[1]', 'float'), Volume2 = T.Item.value('Volume2[1]', 'float') FROM @xml.nodes('//Root/Record') T(item) I uncomment the 2 lines at the top, select them and run just that (the ALTER DATABASE statement), then comment the 2 lines, deselect any text and run the whole thing. When I change from 90 to 100, it runs all the time in 5 seconds (I change the level once, but I run the series several times to see if I have consistent results). When I change from 100 to 90, it runs in milliseconds all the time. Just so you can play with it too. I am using SQL Server 2008 R2 standard edition.

  Read the article

• Insert text into a div from a poput form and rewrite the inserted text with javascript

  - by kuswantin

  So I read some related questions here before I asked, but can't find the answer to my problem. Hope some javascript master here can find this and bring the light to me. I created another button for nicEdit, a video button and wanted to insert some formatted text into the editor DIV (note: nicEdit has inline DIV, no iframe, no textarea). This is my button, recreated from the image button: var nicVideoOptions = { buttons : { 'video' : {name : __('Insert Video'), type : 'nicEditorVideoButton'} //, tags : ['VIDEO:'] }, iconFiles : {'video' : '../movie.png'} }; var nicEditorVideoButton = nicEditorAdvancedButton.extend({ addPane : function() { this.vi = this.ne.selectedInstance.selElm().parentTag('A'); this.addForm({ '' : {type : 'title', txt : 'Insert Video URL'}, 'href' : {type : 'text', txt : 'URL', 'value' : 'http://', style : {width: '150px'}} },this.vi); }, submit : function(e) { var vidVal = this.inputs['href'].value; if(vidVal == "" || vidVal == "http://") { alert("Enter the video url"); return false; } this.removePane(); if(!this.vi) { var tmp = 'javascript:nicVidTemp();'; this.ne.nicCommand("insertVideo",tmp); // still nothing works //this.vi = this.findElm('VIDEO:','href',tmp); //this.vi = this.setContent('[video:' + this.inputs['href'].value + ']'); //nicEditors.findEditor('edit-comment').setContent('<strong>Some HTML</strong> here'); //this.vi = this.setContent('<strong>Some HTML</strong> here'); insertAtCaret(this.ne.selectedInstance, vidVal); } if(this.vi) { // still nothing works //this.vi.setAttributes({ //vidVal : this.inputs['href'].value //}); //this.vi = this.setContent('[video:' + this.inputs['href'].value + ']'); //this.vi = this.setContent('<strong>Some HTML</strong> here'); } } }); nicEditors.registerPlugin(nicPlugin,nicVideoOptions); The button is there, the form poput like the image button, so it's okay. But can't insert the text into the DIV. The final output will be taken from this: ('[video:' + this.inputs['href'].value + ']') and displayed in the editor DIV as is: [video:http//some.com/video-url] As you see, I am blindly touching everything :) And this insertion is taken from: http://www.scottklarr.com/topic/425/how-to-insert-text-into-a-textarea-where-the-cursor-is/ function insertAtCaret(areaId,text) { var txtarea = document.getElementById(areaId); var scrollPos = txtarea.scrollTop; var strPos = 0; var br = ((txtarea.selectionStart || txtarea.selectionStart == '0') ? "ff" : (document.selection ? "ie" : false ) ); if (br == "ie") { txtarea.focus(); var range = document.selection.createRange(); range.moveStart ('character', -txtarea.value.length); strPos = range.text.length; } else if (br == "ff") strPos = txtarea.selectionStart; var front = (txtarea.value).substring(0,strPos); var back = (txtarea.value).substring(strPos,txtarea.value.length); txtarea.value=front+text+back; strPos = strPos + text.length; if (br == "ie") { txtarea.focus(); var range = document.selection.createRange(); range.moveStart ('character', -txtarea.value.length); range.moveStart ('character', strPos); range.moveEnd ('character', 0); range.select(); } else if (br == "ff") { txtarea.selectionStart = strPos; txtarea.selectionEnd = strPos; txtarea.focus(); } txtarea.scrollTop = scrollPos; } The flow: I click the button, a form popouts, fill the input text box, hit the query button and the text should appear in the editor DIV. I hope I can make myself clear. Any help would be very much appreaciated Thanks

  Read the article

• Cobol: science and fiction

  - by user847

  There are a few threads about the relevance of the Cobol programming language on this forum, e.g. this thread links to a collection of them. What I am interested in here is a frequently repeated claim based on a study by Gartner from 1997: that there were around 200 billion lines of code in active use at that time! I would like to ask some questions to verify or falsify a couple of related points. My goal is to understand if this statement has any truth to it or if it is totally unrealistic. I apologize in advance for being a little verbose in presenting my line of thought and my own opinion on the things I am not sure about, but I think it might help to put things in context and thus highlight any wrong assumptions and conclusions I have made. Sometimes, the "200 billion lines" number is accompanied by the added claim that this corresponded to 80% of all programming code in any language in active use. Other times, the 80% merely refer to so-called "business code" (or some other vague phrase hinting that the reader is not to count mainstream software, embedded systems or anything else where Cobol is practically non-existent). In the following I assume that the code does not include double-counting of multiple installations of the same software (since that is cheating!). In particular in the time prior to the y2k problem, it has been noted that a lot of Cobol code is already 20 to 30 years old. That would mean it was written in the late 60ies and 70ies. At that time, the market leader was IBM with the IBM/370 mainframe. IBM has put up a historical announcement on his website quoting prices and availability. According to the sheet, prices are about one million dollars for machines with up to half a megabyte of memory. Question 1: How many mainframes have actually been sold? I have not found any numbers for those times; the latest numbers are for the year 2000, again by Gartner. :^( I would guess that the actual number is in the hundreds or the low thousands; if the market size was 50 billion in 2000 and the market has grown exponentially like any other technology, it might have been merely a few billions back in 1970. Since the IBM/370 was sold for twenty years, twenty times a few thousand will result in a couple of ten-thousands of machines (and that is pretty optimistic)! Question 2: How large were the programs in lines of code? I don't know how many bytes of machine code result from one line of source code on that architecture. But since the IBM/370 was a 32-bit machine, any address access must have used 4 bytes plus instruction (2, maybe 3 bytes for that?). If you count in operating system and data for the program, how many lines of code would have fit into the main memory of half a megabyte? Question 3: Was there no standard software? Did every single machine sold run a unique hand-coded system without any standard software? Seriously, even if every machine was programmed from scratch without any reuse of legacy code (wait ... didn't that violate one of the claims we started from to begin with???) we might have O(50,000 l.o.c./machine) * O(20,000 machines) = O(1,000,000,000 l.o.c.). That is still far, far, far away from 200 billion! Am I missing something obvious here? Question 4: How many programmers did we need to write 200 billion lines of code? I am really not sure about this one, but if we take an average of 10 l.o.c. per day, we would need 55 million man-years to achieve this! In the time-frame of 20 to 30 years this would mean that there must have existed two to three million programmers constantly writing, testing, debugging and documenting code. That would be about as many programmers as we have in China today, wouldn't it? Question 5: What about the competition? So far, I have come up with two things here: 1) IBM had their own programming language, PL/I. Above I have assumed that the majority of code has been written exclusively using Cobol. However, all other things being equal I wonder if IBM marketing had really pushed their own development off the market in favor of Cobol on their machines. Was there really no relevant code base of PL/I? 2) Sometimes (also on this board in the thread quoted above) I come across the claim that the "200 billion lines of code" are simply invisible to anybody outside of "governments, banks ..." (and whatnot). Actually, the DoD had funded their own language in order to increase cost effectiveness and reduce the proliferation of programming language. This lead to their use of Ada. Would they really worry about having so many different programming languages if they had predominantly used Cobol? If there was any language running on "government and military" systems outside the perception of mainstream computing, wouldn't that language be Ada? I hope someone can point out any flaws in my assumptions and/or conclusions and shed some light on whether the above claim has any truth to it or not.

  Read the article

• XSLT Select all nodes containing a specific substing

  - by Mike

  I'm trying to write an XPath that will select certain nodes that contain a specific word. In this case the word is, "Lockwood". The correct answer is 3. Both of these paths give me 3. count(//*[contains(./*,'Lockwood')]) count(BusinessLetter/*[contains(../*,'Lockwood')]) But when I try to output the text of each specific node //*[contains(./*,'Lockwood')][1] //*[contains(./*,'Lockwood')][2] //*[contains(./*,'Lockwood')][3] Node 1 ends up containing all the text and nodes 2 and 3 are blank. Can some one please tell me what's happening or what I'm doing wrong. Thanks. <?xml version="1.0" encoding="UTF-8"?> <?xml-stylesheet type="text/xsl" href="XPathFunctions.xsl"?> <BusinessLetter> <Head> <SendDate>November 29, 2005</SendDate> <Recipient> <Name Title="Mr."> <FirstName>Joshua</FirstName> <LastName>Lockwood</LastName> </Name> <Company>Lockwood &amp; Lockwood</Company> <Address> <Street>291 Broadway Ave.</Street> <City>New York</City> <State>NY</State> <Zip>10007</Zip> <Country>United States</Country> </Address> </Recipient> </Head> <Body> <List> <Heading>Along with this letter, I have enclosed the following items:</Heading> <ListItem>two original, execution copies of the Webucator Master Services Agreement</ListItem> <ListItem>two original, execution copies of the Webucator Premier Support for Developers Services Description between Lockwood &amp; Lockwood and Webucator, Inc.</ListItem> </List> <Para>Please sign and return all four original, execution copies to me at your earliest convenience. Upon receipt of the executed copies, we will immediately return a fully executed, original copy of both agreements to you.</Para> <Para>Please send all four original, execution copies to my attention as follows: <Person> <Name> <FirstName>Bill</FirstName> <LastName>Smith</LastName> </Name> <Address> <Company>Webucator, Inc.</Company> <Street>4933 Jamesville Rd.</Street> <City>Jamesville</City> <State>NY</State> <Zip>13078</Zip> <Country>USA</Country> </Address> </Person> </Para> <Para>If you have any questions, feel free to call me at <Phone>800-555-1000 x123</Phone> or e-mail me at <Email>[email protected]</Email>.</Para> </Body> <Foot> <Closing> <Name> <FirstName>Bill</FirstName> <LastName>Smith</LastName> </Name> <JobTitle>VP of Operations</JobTitle> </Closing> </Foot> </BusinessLetter>

  Read the article

• ScriptManager emits ScriptReferences after ClientScriptIncludes. Why?

  - by Chris F

  I have an application that uses a lot of javascript in a lot of different .js files. Each page can have any number and combination of different controls and each control can use a different set of js files. Instead of including all possible js files as <script src="xxx.js"> in the head of my master page, I thought I would reduce the amount of included files by getting each control to call ScriptManager.Scripts.Add(new ScriptReference("xxx.js")) - thus only the scripts that are actually needed by the page will be included. Well that bit works fine. But...the controls also use ScriptManager.RegisterClientScriptBlock fairly extensively too. (There are scenarios where the controls are inside update panels). I was disappointed to see that the ScriptManager emits the client script includes before the ScriptReferences. For example - see the test file and output at the end (this results in a JS error because $ is not defined). Am I being dumb or is this to be expected? I would have thought that a sensible thing for the ScriptManger to do would be to emit the ScriptReferences first and then the other stuff. Short of rolling my own ScriptManager like object to manage static JS file references, does anyone have any suggestions as to get the behaviour that I want from ScriptManager?? Thanks in advance. Example File <%@ Page Language="C#" AutoEventWireup="true" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <script runat="server"> protected void Page_Load(object sender, EventArgs e) { ScriptManager.RegisterClientScriptBlock(Page, Page.GetType(), "Test", "$(function() {alert('hello');});", true); } </script> </head> <body> <form id="form1" runat="server"> <asp:ScriptManager runat="server" > <Scripts> <asp:ScriptReference Path="~/jquery/jquery.js" /> </Scripts> </asp:ScriptManager> </form> </body> </html> Output <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > ... boring stuff removed .... <script src="/js/WebResource.axd?d=-nOHbla bla " type="text/javascript"></script> <script type="text/javascript"> //<![CDATA[ $(function() {alert('hello');});//]]> </script> ... boring stuff removed .... <script src="/js/ScriptResource.axd?d=qgCbla bla bla" type="text/javascript"></script> <script src="jquery/jquery.js" type="text/javascript"></script> ... boring stuff removed .... </form> </body> </html>

  Read the article

• Two-way databinding of a custom templated control. Eval works, but not Bind.

  - by Jason

  I hate long code snippets and I'm sorry about this one, but it turns out that this asp.net stuff can't get much shorter and it's so specific that I haven't been able to generalize it without a full code listing. I just want simple two-way, declarative databinding to a single instance of an object. Not a list of objects of a type with a bunch of NotImplementedExceptions for Add, Delete, and Select, but just a single view-state persisted object. This is certainly something that can be done but I've struggled with an implementation for years. This newest, closest implementation was inspired by this article from 4-Guys-From-Rolla, http://msdn.microsoft.com/en-us/library/aa478964.aspx. Unfortunately, after implementing, I'm getting the following error and I don't know what I'm missing: System.InvalidOperationException: Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control. If I don't use Bind(), and only use Eval() functionality, it works. In that way, the error is especially confusing. Here's the simplified codeset that still produces the error: using System.ComponentModel; namespace System.Web.UI.WebControls.Special { public class SampleFormData { public string SampleString = "Sample String Data"; public int SampleInt = -1; } [ToolboxItem(false)] public class SampleSpecificFormDataContainer : WebControl, INamingContainer { SampleSpecificEntryForm entryForm; internal SampleSpecificEntryForm EntryForm { get { return entryForm; } } [Bindable(true), Category("Data")] public string SampleString { get { return entryForm.FormData.SampleString; } set { entryForm.FormData.SampleString = value; } } [Bindable(true), Category("Data")] public int SampleInt { get { return entryForm.FormData.SampleInt; } set { entryForm.FormData.SampleInt = value; } } internal SampleSpecificFormDataContainer(SampleSpecificEntryForm entryForm) { this.entryForm = entryForm; } } public class SampleSpecificEntryForm : WebControl, INamingContainer { #region Template private IBindableTemplate formTemplate = null; [Browsable(false), DefaultValue(null), TemplateContainer(typeof(SampleSpecificFormDataContainer), ComponentModel.BindingDirection.TwoWay), PersistenceMode(PersistenceMode.InnerProperty)] public virtual IBindableTemplate FormTemplate { get { return formTemplate; } set { formTemplate = value; } } #endregion #region Viewstate SampleFormData FormDataVS { get { return (ViewState["FormData"] as SampleFormData) ?? new SampleFormData(); } set { ViewState["FormData"] = value; SaveViewState(); } } #endregion public override ControlCollection Controls { get { EnsureChildControls(); return base.Controls; } } private SampleSpecificFormDataContainer formDataContainer = null; [Browsable(false), DesignerSerializationVisibility(DesignerSerializationVisibility.Hidden)] public SampleSpecificFormDataContainer FormDataContainer { get { EnsureChildControls(); return formDataContainer; } } [Bindable(true), Browsable(false)] public SampleFormData FormData { get { return FormDataVS; } set { FormDataVS = value; } } protected override void CreateChildControls() { if (!this.ChildControlsCreated) { Controls.Clear(); formDataContainer = new SampleSpecificFormDataContainer(this); Controls.Add(formDataContainer); FormTemplate.InstantiateIn(formDataContainer); this.ChildControlsCreated = true; } } public override void DataBind() { CreateChildControls(); base.DataBind(); } } } With an ASP.NET page the following: <%@ Page Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="Default2.aspx.cs" Inherits="EntryFormTest._Default2" EnableEventValidation="false" %> <%@ Register Assembly="EntryForm" Namespace="System.Web.UI.WebControls.Special" TagPrefix="cc1" %> <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> </asp:Content> <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> <h2> Welcome to ASP.NET! </h2> <cc1:SampleSpecificEntryForm ID="EntryForm1" runat="server"> <FormTemplate> <asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("SampleString") %>'></asp:TextBox><br /> <h3>(<%# Container.SampleString %>)</h3><br /> <asp:Button ID="Button1" runat="server" Text="Button" /> </FormTemplate> </cc1:SampleSpecificEntryForm> </asp:Content> Default2.aspx.cs using System; namespace EntryFormTest { public partial class _Default2 : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { EntryForm1.DataBind(); } } } Thanks for any help!

  Read the article

• Editing a Gridview row with drop-down lists gets too wide - how can I use popup panels instead?

  - by David

  I have a series of GridViews in a Tab Panel - databound to a generic List of Business Objects. The columns in the Gridview are all similar to the following: <asp:TemplateField HeaderText="Company" SortExpression="Company.ShortName"> <ItemTemplate> <asp:Label ID="lblCompany" runat="server" Text='<%# Bind("Company.ShortName") %>'></asp:Label> </ItemTemplate> <EditItemTemplate> <asp:DropDownList ID="ddlCompany" runat="server"></asp:DropDownList> </EditItemTemplate> </asp:TemplateField> The GridView generates the "Edit" link at the beginning of the row, all the events fire ok. The problem is that the data is getting long. When in 'display mode', it's fine because the GridView control is smart enough to break some text into multiple lines (in particular Project, Title and Worker names can get pretty long). The problem come in editing mode. Drop-down lists DON'T break entries into multiple lines (for obvious reasons). Going into Edit ode on a row in the Gridview can make the Griview expand horizontally to twice the screen size (blowing through the width limits in the Master page and CSS but that's only a related problem). What I need is something like the ModalPopup - but trying to tie it to an ID in an EditItemTemplate gives me errors when the page renders (because the 'ddlXXXX' doesn't exist at the time). In addition I don't know how to dynamically populate the panel so that I can get a response from it (like the ID of the Company they selected). I'm also trying to avoid javascript and would like this to be a 'pure' aspx/code-behind solution (for simplicity's sake among others). All the examples I find are of Modal Popups with the panels pre-defined. Even if it (the popup panel) were something like a list of checkboxes, it could be databound to the SortedList I have ready to go and an OK/Cancel button combination to accept or ignore things. I'm just not sure of what goes where. I'm open to suggestions. Thanks in advance. EDIT: Final solution looks as follows: <asp:TemplateField HeaderText="Company" SortExpression="Company.ShortName"> <ItemTemplate> <asp:Label ID="lblCompany" runat="server" Text='<%# Bind("Company.ShortName") %>'></asp:Label> </ItemTemplate> <EditItemTemplate> <asp:LinkButton ID="lnkCompany" runat="server" Text='<%# Bind("Company.ShortName") %>'></asp:LinkButton> <asp:Panel ID="pnlCompany" runat="server" style="display:none"> <div> <asp:DropDownList ID="ddlCompany" runat="server" ></asp:DropDownList> <br/> <asp:ImageButton ID="btnOKCo" runat="server" ImageUrl="~/Images/greencheck.gif" OnCommand="PopupButton_Command" CommandName="SelectCO" /> <asp:ImageButton ID="btnCxlCo" runat="server" ImageUrl="~/Images/RedX.gif" /> </div> </asp:Panel> <cc1:ModalPopupExtender ID="mpeCompany" runat="server" TargetControlID="lnkCompany" PopupControlID="pnlCompany" BackgroundCssClass="modalBackground" CancelControlID="btnCxlCo" DropShadow="true" PopupDragHandleControlID="pnlCompany" /> </EditItemTemplate> </asp:TemplateField> And in the code-behind, lstIDLabor is the generic List of data lines (of which Company is one of the properties that is also a business object) that is bound to the GridView: Sub PopupButton_Command(ByVal sender As Object, ByVal e As CommandEventArgs) Dim intRow As Integer Dim intVal As Integer RestoreFromSessionVariables() Select Case e.CommandName Case "SelectCO" intRow = grdIDCostLabor.EditIndex Dim ddlCo As DropDownList = CType(grdIDCost.Rows(intRow).FindControl("ddlCompany"), DropDownList) intVal = ddlCo.SelectedValue lstIDLabor(intRow).CompanyID = intVal lstIDLabor(intRow).Company = Company.Read(intVal) Case Else ' End Select MakeSessionVariables() BindGrids() End Sub

  Read the article

• ASP.MVC 1.0 complex ViewModel not populating on Action

  - by Graham

  Hi, I'm 3 days into learning MVC for a new project and i've managed to stumble my way over the multitude of issues I've come across - mainly about something as simple as moving data to a view and back into the controller in a type-safe (and manageable) manner. This is the latest. I've seen this reported before but nothing advised has seemed to work. I have a complex view model: public class IndexViewModel : ApplicationViewModel { public SearchFragment Search { get; private set; } public IndexViewModel() { this.Search = new SearchFragment(); } } public class SearchFragment { public string ItemId { get; set; } public string Identifier { get; set; } } This maps to (the main Index page): %@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<IndexViewModel>" %> <asp:Content ID="Content1" ContentPlaceHolderID="MainContent" runat="server"> <% Html.BeginForm("Search", AvailableControllers.Search, FormMethod.Post); %> <div id="search"> <% Html.RenderPartial("SearchControl", Model.Search); %> </div> <% Html.EndForm(); %> </asp:Content> and a UserControl: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<SearchFragment>" %> <p> <label for="itemId"> <%= Html.Resource("ItemId") %></label> <%= Html.TextBox("itemId", Model.ItemId)%> </p> <p> <label for="title"> <%= Html.Resource("Title") %></label> <%= Html.TextBox("identifier", Model.Identifier)%> </p> <p> <input type="submit" value="<%= Html.Resource("Search") %>" name="search" /> </p> This is returned to the following method: [AcceptVerbs(HttpVerbs.Post)] public ActionResult Search(IndexViewModel viewModel) { .... } My problem is that when the view model is rehydrated from the View into the ViewModel, the SearchFragment elements are null. I suspect this is because the default model binder doesn't realise the HTML ItemId and Identifier elements rendered inline in the View map to the SearchFragment class. When I have two extra properties (ItemId and Identifier) in the IndexViewModel, the values are bound correctly. Unfortunately, as far as I can tell, I must use the SearchFragment as I need this to strongly type the Search UserControl... as the control can be used anywhere it can operate under any parent view. I really don't want to make it use "magic strings". There's too much of that going on already IMO. I've tried prefixing the HTML with "Search." in the hope that the model binder would recognise "Search.ItemId" and match to the IndexViewModel "Search" property and the ItemId within it, but this doesn't work. I fear I'm going to have to write my own ModelBinder to do this, but surely this must be something you can do out-of-the-box?? Failing that is there any other suggestions (or link to someone who has already done this?) Here's hoping....

  Read the article

• Edit problem on asp.net mvc

  - by ognjenb

  <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<IEnumerable<MvcKVteam.Models.transporter>>" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Transporters </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>Transporters</h2> <table class="data-table" id=""> <tr> <th> Id </th> <th> ContactId </th> <th> Name </th> <th> Notes </th> <th> PreferredCurrency </th> <th> PriceList </th> <th> SeviceTypeAvailible </th> <th> Contact </th> </tr> <% foreach (var item in Model) { %> <tr> <td> <%= Html.Encode(item.Id) %> </td> <td> <%= Html.Encode(item.ContactId) %> </td> <td> <%= Html.Encode(item.Name) %> </td> <td> <%= Html.Encode(item.Notes) %> </td> <td> <%= Html.Encode(item.PreferredCurrency) %> </td> <td> <%= Html.Encode(item.PriceList) %> </td> <td> <%= Html.Encode(item.SeviceTypeAvailible) %> </td> <td> <%= Html.ActionLink("View contact info", "Edit", new { id = item.ContactId }) %> </td> </tr> <% } %> </table> <p> <%= Html.ActionLink("Create New", "Create") %> </p> This action for Edit: public ActionResult Edit(int id) { var FilesQuery1 = from i in FilesEntities.contact where i.Id == id select i; return View(FilesQuery1); } When click on "View contact info" link I have this error: The model item passed into the dictionary is of type 'System.Data.Objects.ObjectQuery`1[MvcKVteam.Models.contact]', but this dictionary requires a model item of type 'MvcKVteam.Models.contact'.

  Read the article

• Delphi7 - How can i copy a file that is being written to

  - by Simon

  I have an application that logs information to a daily text file every second on a master PC. A Slave PC on the network using the same application would like to copy this text file to its local drive. I can see there is going to be file access issues. These files should be no larger than 30-40MB each. the network will be 100MB ethernet. I can see there is potential for the copying process to take longer than 1 second meaning the logging PC will need to open the file for writing while it is being read. What is the best method for the file writing(logging) and file copying procedures? I know there is the standard Windows CopyFile() procedure, however this has given me file access problems. There is also TFileStream using the fmShareDenyNone flag, but this also very occasionally gives me an access problem too (like 1 per week). What is this the best way of accomplishing this task? My current File Logging: procedure FSWriteline(Filename,Header,s : String); var LogFile : TFileStream; line : String; begin if not FileExists(filename) then begin LogFile := TFileStream.Create(FileName, fmCreate or fmShareDenyNone); try LogFile.Seek(0,soFromEnd); line := Header + #13#10; LogFile.Write(line[1],Length(line)); line := s + #13#10; LogFile.Write(line[1],Length(line)); finally logfile.Free; end; end else begin line := s + #13#10; Logfile:=tfilestream.Create(Filename,fmOpenWrite or fmShareDenyNone); try logfile.Seek(0,soFromEnd); Logfile.Write(line[1], length(line)); finally Logfile.free; end; end; end; My file copy procedure: procedure DoCopy(infile, Outfile : String); begin ForceDirectories(ExtractFilePath(outfile)); //ensure folder exists if FileAge(inFile) = FileAge(OutFile) then Exit; //they are the same modified time try { Open existing destination } fo := TFileStream.Create(Outfile, fmOpenReadWrite or fmShareDenyNone); fo.Position := 0; except { otherwise Create destination } fo := TFileStream.Create(OutFile, fmCreate or fmShareDenyNone); end; try { open source } fi := TFileStream.Create(InFile, fmOpenRead or fmShareDenyNone); try cnt:= 0; fi.Position := cnt; max := fi.Size; {start copying } Repeat dod := BLOCKSIZE; // Block size if cnt+dod>max then dod := max-cnt; if dod>0 then did := fo.CopyFrom(fi, dod); cnt:=cnt+did; Percent := Round(Cnt/Max*100); until (dod=0) finally fi.free; end; finally fo.free; end; end;

  Read the article

• DDNS Not Creating Journal (Dhcpd and Named)

  - by user130094

  * EDIT 1 * After monkeying with additional debug logging I see some log entries of interest. 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: journal rollforward failed: no more 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: not loaded due to errors. ^^^ If I can remedy the above messages I think I'll be good to go ^^^ * EDIT 2 * Grasping at straws I touched a forward and a reverse zone journal file and restarted named. Boom! Works. Despite documentation stating the files are created automatically and what I have seen before... dunno why but that did the trick. Also re-checked perms on the dir the files live in. As certain as I was, they were correct with named having rw. CentOS 6 (final) dhcpd 4.1.1-P1 named BIND 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6 Basic DHCP and DNS functionality are in place on 192.168.111.2. Clients are assigned addresses as intended and can resolve local DNS names as well as Internet names. My problem is that named's zone journal files are not created. chroot: /var/named/chroot I tried placing the zone files in various directories (/var/named/data, /var/named, /var/named/dynamic - no matter which dir with named owning and wide open perms I now get nowhere). Along the way I, at one point, got a permission denied when named tried to create the journal. Resolved the issue by: chown --recursive named:named /var/named chmod --recursive 777 /var/named The journal was then created and here's where things fell apart. I attempted to tame permissions to something more sane and broke it. Once changed and having restarted named it threw an error indicating the journal was out of sync (or something to that affect)... didn't matter since this is a new setup so I deleted it and now it is not recreated. Now though I see no errors in /var/log/messages, my chrooted /var/log/named.log, or chrooted /var/log/named.debug. I increased the debug level with 'rndc trace' - no love. Increased trace to 10, still nothing. SELinux is disabled... [root@server temp]# sestatus SELinux status: disabled dhcpd.conf... allow client-updates; ddns-update-style interim; subnet 192.168.111.0 netmask 255.255.255.224 { ... key dhcpudpate { algorithm hmac-md5; secret LDJMdPdEZED+/nN/AGO9ZA==; } zone example.lan. { primary 192.168.111.2; key dhcpudpate; } } named.conf... key dhcpudpate { algorithm hmac-md5; secret "LDJMdPdEZED+/nN/AGO9ZA=="; }; zone "example.lan" { type master; file "/var/named/dynamic/example.lan.db"; allow-transfer { none; }; allow-update { key dhcpudpate; }; notify false; check-names ignore; }; The following shows /var/log/named.log output of named starting up - no errors. 27-Jul-2012 21:33:39.349 general: info: zone 111.168.192.in-addr.arpa/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.349 general: info: zone example.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example2.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example3.lan/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.350 general: info: zone example4.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: zone example5.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: managed-keys-zone ./IN/internal: loaded serial 0 27-Jul-2012 21:33:39.351 general: info: zone example.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example1.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example2.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example3.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.353 general: info: managed-keys-zone ./IN/external: loaded serial 0 27-Jul-2012 21:33:39.353 general: notice: running 27-Jul-2012 21:34:03.825 general: info: received control channel command 'trace 10' 27-Jul-2012 21:34:03.825 general: info: debug level is now 10 ...and /var/log/messages for a named start... Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: BIND 9 is maintained by Internet Systems Consortium, Jul 27 23:02:04 server named[9124]: Inc. (ISC), a non-profit 501(c)(3) public-benefit Jul 27 23:02:04 server named[9124]: corporation. Support and training for BIND 9 are Jul 27 23:02:04 server named[9124]: available at https://www.isc.org/support Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: adjusted limit on open files from 4096 to 1048576 Jul 27 23:02:04 server named[9124]: found 2 CPUs, using 2 worker threads Jul 27 23:02:04 server named[9124]: using up to 4096 sockets Jul 27 23:02:04 server named[9124]: loading configuration from '/etc/named.conf' Jul 27 23:02:04 server named[9124]: using default UDP/IPv4 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: using default UDP/IPv6 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: listening on IPv4 interface eth0, 192.168.111.2#53 Jul 27 23:02:04 server named[9124]: generating session key for dynamic DNS Jul 27 23:02:04 server named[9124]: sizing zone task pool based on 12 zones Jul 27 23:02:04 server named[9124]: set up managed keys zone for view internal, file 'dynamic/3bed2cb3a3acf7b6a8ef408420cc682d5520e26976d354254f528c965612054f.mkeys' Jul 27 23:02:04 server named[9124]: set up managed keys zone for view external, file 'dynamic/3c4623849a49a53911c4a3e48d8cead8a1858960bccdea7a1b978d73ec2f06d7.mkeys' Jul 27 23:02:04 server named[9124]: command channel listening on 127.0.0.1#953 What can I do to troubleshoot this further? It almost seems as though dhcpd is not triggering the update. Maybe I should troubleshoot here and, if so, how? Many thanks.

  Read the article

• Losing NSManaged Objects in my Application

  - by Wayfarer

  I've been doing quite a bit of work on a fun little iPhone app. At one point, I get a bunch of player objects from my Persistant store, and then display them on the screen. I also have the options of adding new player objects (their just custom UIButtons) and removing selected players. However, I believe I'm running into some memory management issues, in that somehow the app is not saving which "players" are being displayed. Example: I have 4 players shown, I select them all and then delete them all. They all disappear. But if I exit and then reopen the application, they all are there again. As though they had never left. So somewhere in my code, they are not "really" getting removed. MagicApp201AppDelegate *appDelegate = [[UIApplication sharedApplication] delegate]; context = [appDelegate managedObjectContext]; NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSEntityDescription *desc = [NSEntityDescription entityForName:@"Player" inManagedObjectContext:context]; [request setEntity:desc]; NSError *error; NSMutableArray *objects = [[[context executeFetchRequest:request error:&error] mutableCopy] autorelease]; if (objects == nil) { NSLog(@"Shit man, there was an error taking out the single player object when the view did load. ", error); } int j = 0; while (j < [objects count]) { if ([[[objects objectAtIndex:j] valueForKey:@"currentMultiPlayer"] boolValue] == NO) { [objects removeObjectAtIndex:j]; j--; } else { j++; } } [self setPlayers:objects]; //This is a must, it NEEDS to work Objects are all the players playing So in this snippit (in the viewdidLoad method), I grab the players out of the persistant store, and then remove the objects I don't want (those whose boolValue is NO), and the rest are kept. This works, I'm pretty sure. I think the issue is where I remove the players. Here is that code: NSLog(@"Remove players"); /** For each selected player: Unselect them (remove them from SelectedPlayers) Remove the button from the view Remove the button object from the array Remove the player from Players */ NSLog(@"Debugging Removal: %d", [selectedPlayers count]); for (int i=0; i < [selectedPlayers count]; i++) { NSManagedObject *rPlayer = [selectedPlayers objectAtIndex:i]; [rPlayer setValue:[NSNumber numberWithBool:NO] forKey:@"currentMultiPlayer"]; int index = [players indexOfObjectIdenticalTo:rPlayer]; //this is the index we need for (int j = (index + 1); j < [players count]; j++) { UIButton *tempButton = [playerButtons objectAtIndex:j]; tempButton.tag--; } NSError *error; if ([context hasChanges] && ![context save:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } UIButton *aButton = [playerButtons objectAtIndex:index]; [players removeObjectAtIndex:index]; [aButton removeFromSuperview]; [playerButtons removeObjectAtIndex:index]; } [selectedPlayers removeAllObjects]; NSError *error; if ([context hasChanges] && ![context save:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } NSLog(@"About to refresh YES"); [self refreshAllPlayers:YES]; The big part in the second code snippet is I set them to NO for currentMultiPlayer. NO NO NO NO NO, they should NOT come back when the view does load, NEVER ever ever. Not until I say so. No other relevant part of the code sets that to YES. Which makes me think... perhaps they aren't being saved. Perhaps that doesn't save, perhaps those objects aren't being managed anymore, and so they don't get saved in. Is there a lifetime (metaphorically) of NSManaged object? The Players array is the same I set in the "viewDidLoad" method, and SelectedPlayers holds players that are selected, references to NSManagedObjects. Does it have something to do with Removing them from the array? I'm so confused, some insight would be greatly appreciated!!

  Read the article

• CentOS - Configuring Puppet to play nice with SELinux

  - by Mike Purcell

  I am running into an issue every time I attempt to start the puppetmasterd service, for which I receive the following error message: root@service1 ~ # -> /etc/init.d/puppetmaster start Starting puppetmaster: Could not prepare for execution: Got 1 failure(s) while initializing: change from absent to directory failed: Could not set 'directory on ensure: Permission denied - /etc/puppet/ssl [FAILED] Apparently there was a known issue with this scenario as outlined in this bug report, however in the bug report it states the issue has been resolved in selinux-policy-3.9.16-29.fc15, but the latest CentOS default upstream version is 3.7.19-155.el6_3.4. So I am trying to figure out the best solution. I can either create a local security policy to allow puppetmasterd the access it needs, or keep researching and install a newer version of selinux-policy outside of the default upstream channel. Anyone have any recommendations? Please don't recommend disabling SELinux... ----- Update ----- Here is the puppet.conf: [main] # The Puppet log directory. # The default value is '$vardir/log'. logdir = /var/log/puppet # Where Puppet PID files are kept. # The default value is '$vardir/run'. rundir = /var/run/puppet # Where SSL certificates are kept. # The default value is '$confdir/ssl'. ssldir = $vardir/ssl [master] certname=puppetmaster.ownij.lan dns_alt_names=puppetmaster.ownij.lan [agent] # The file in which puppetd stores a list of the classes # associated with the retrieved configuratiion. Can be loaded in # the separate ``puppet`` executable using the ``--loadclasses`` # option. # The default value is '$confdir/classes.txt'. classfile = $vardir/classes.txt # Where puppetd caches the local configuration. An # extension indicating the cache format is added automatically. # The default value is '$confdir/localconfig'. localconfig = $vardir/localconfig server=puppetmaster.ownij.lan And here are the denials per the audit log: type=AVC msg=audit(1349751364.985:666): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751364.985:666): arch=c000003e syscall=4 success=no exit=-13 a0=1391420 a1=7fffef09ed10 a2=7fffef09ed10 a3=120c500 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751365.302:667): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751365.302:667): arch=c000003e syscall=4 success=no exit=-13 a0=1d18530 a1=7fffef0d04d0 a2=7fffef0d04d0 a3=8 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751365.465:668): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751365.465:668): arch=c000003e syscall=4 success=no exit=-13 a0=1af3930 a1=7fffef0c5c70 a2=7fffef0c5c70 a3=8 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751365.467:669): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751365.467:669): arch=c000003e syscall=4 success=no exit=-13 a0=1b17aa0 a1=7fffef0c5c70 a2=7fffef0c5c70 a3=8 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751366.401:670): avc: denied { write } for pid=15093 comm="puppetmasterd" name="puppet" dev=dm-0 ino=132035 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:puppet_etc_t:s0 tclass=dir type=SYSCALL msg=audit(1349751366.401:670): arch=c000003e syscall=83 success=no exit=-13 a0=2d7a400 a1=1f9 a2=2d7a40f a3=7fffef0a6df0 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) And the audit log if I pass through audit2allow: root@service1 ~ # -> fgrep puppetmasterd /var/log/audit/audit.log | audit2allow -m puppetmasterd module puppetmasterd 1.0; require { type home_root_t; type puppetmaster_t; type puppet_etc_t; type puppet_var_run_t; type httpd_sys_content_t; class lnk_file { relabelfrom relabelto }; class file { relabelfrom read getattr open }; class dir { write read search getattr setattr }; } #============= puppetmaster_t ============== allow puppetmaster_t home_root_t:dir { search getattr }; allow puppetmaster_t httpd_sys_content_t:dir read; allow puppetmaster_t httpd_sys_content_t:file { read getattr open }; #!!!! The source type 'puppetmaster_t' can write to a 'dir' of the following types: # puppet_log_t, puppet_var_lib_t, puppet_var_run_t, puppetmaster_tmp_t allow puppetmaster_t puppet_etc_t:dir { write setattr }; allow puppetmaster_t puppet_etc_t:lnk_file { relabelfrom relabelto }; allow puppetmaster_t puppet_var_run_t:file relabelfrom;

  Read the article

• Using jQuery to call a web service

  - by Matt

  I have created a web service which takes a username and password as parameters and returns a list of children in JSON (the user is a Social Worker). The web service is hosted locally with IIS7. I am attempting to access the web service using javascript/jquery because it will eventually need to run as a mobile app. I'm not really experienced with web services, or javascript for that matter, but the following two links seemed to point me in the right direction: http://williamsportwebdeveloper.com/cgi/wp/?p=494 http://encosia.com/using-jquery-to-consume-aspnet-json-web-services/ This is my html page: <%@ Page Title="" Language="C#" MasterPageFile="~/MasterPage.Master" AutoEventWireup="true" CodeBehind="TestWebService.aspx.cs" Inherits="Sponsor_A_Child.TestWebService" %> <asp:Content ID="Content1" ContentPlaceHolderID="stylesPlaceHolder" runat="server"> <script type="text/javascript" src="Scripts/jquery-1.7.1.js"> $(document).ready(function () { }); function LoginClientClick() { $("#query_results").empty(); $("#query_results").append('<table id="ResultsTable" class="ChildrenTable"><tr><th>Child_ID</th><th>Child_Name</th><th>Child_Surname</th></tr>'); $.ajax({ type: "POST", contentType: "application/json; charset=utf-8", url: "http://localhost/PhoneWebServices/GetChildren.asmx/GetMyChildren", data: '{ "email" : "' + $("#EmailBox").val() + '", "password": "' + $("#PasswordBox").val() + '" }', dataType: "json", success: function (msg) { var c = eval(msg.d); alert("" + c); for (var i in c) { $("#ResultsTable tr:last").after("<tr><td>" + c[i][0] + "</td><td>" + c[i][1] + "</td><td>" + c[i][2] + "</td></tr>"); } } }); } </script> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="contentPlaceHolder" runat="server"> <div id="LoginDiv"> Email: <input id="EmailBox" type="text" /><br /> Password: <input id="PasswordBox" type="password" /><br /> <input id="LoginButton" type="button" value="Submit" onclick="LoginClientClick()" /> </div> <div id="query_results"> </div> </asp:Content> And this is my web service code: [WebMethod (Description="Returns the list of children for whom the social worker is responsible.")] public String GetMyChildren(String email,String password) { DataSet MyChildren=new DataSet(); int ID=SocialWorkerLogin(email, password); if (ID > 0) { MyChildren = FillChildrenTable(ID); } MyChildren.DataSetName = "My Children"; //To prevent 'DataTable name not set' error string[][] JaggedArray = new string[MyChildren.Tables[0].Rows.Count][]; int i = 0; foreach (DataRow rs in MyChildren.Tables[0].Rows) { JaggedArray[i] = new string[] { rs["Child_ID"].ToString(), rs["Child_Name"].ToString(), rs["Child_Surname"].ToString() }; i = i + 1; } // Return JSON data JavaScriptSerializer js = new JavaScriptSerializer(); string strJSON = js.Serialize(JaggedArray); return strJSON; } I followed the examples in the provided links, but when I press submit, only the table headers appear but not the list of children. When I test the web service on it's own though, it does return a JSON string so that part seems to be working. Any help is greatly appreciated :)

  Read the article

• How to replace slide effect to fade out/fade in effect on this slideshow?

  - by LDam

  Hi guys! I need replace slide effect to fade-out/fade-in effect on the prev and next slide functions: function animate(dir,clicked){ u = true; switch(dir){ case 'next': t = t+1; m = (-(t*w-w)); current(t); if(o.autoHeight){autoHeight(t);} if(s<3){ if (t===3){$(o.slides,obj).children(':eq(0)').css({left:(s*w)});} if (t===2){$(o.slides,obj).children(':eq('+(s-1)+')').css({position:'absolute',left:(w)});} } $(o.slides,obj).animate({left: m}, o.slidespeed,function(){ if (t===s+1) { t = 1; $(o.slides,obj).css({left:0},function(){$(o.slides,obj).animate({left:m})}); $(o.slides,obj).children(':eq(0)').css({left: 0}); $(o.slides,obj).children(':eq('+(s-1)+')').css({ position:'absolute',left:-w}); } if (t===s) $(o.slides,obj).children(':eq(0)').css({left:(s*w)}); if (t===s-1) $(o.slides,obj).children(':eq('+(s-1)+')').css({left:s*w-w}); u = false; }); break; case 'prev': t = t-1; m = (-(t*w-w)); current(t); if(o.autoHeight){autoHeight(t);} if (s<3){ if(t===0){$(o.slides,obj).children(':eq('+(s-1)+')').css({position:'absolute',left:(-w)});} if(t===1){$(o.slides,obj).children(':eq(0)').css({position:'absolute',left:0});} } $(o.slides,obj).animate({left: m}, o.slidespeed,function(){ if (t===0) { t = s; $(o.slides,obj).children(':eq('+(s-1)+')').css({position:'absolute',left:(s*w-w)}); $(o.slides,obj).css({left: -(s*w-w)}); $(o.slides,obj).children(':eq(0)').css({left:(s*w)}); } if (t===2 ) $(o.slides,obj).children(':eq(0)').css({position:'absolute',left:0}); if (t===1) $(o.slides,obj).children(':eq('+ (s-1) +')').css({position:'absolute',left:-w}); u = false; }); break; case 'fade': t = [t]*1; m = (-(t*w-w)); current(t); if(o.autoHeight){autoHeight(t);} $(o.slides,obj).children().fadeOut(o.fadespeed, function(){ $(o.slides,obj).css({left: m}); $(o.slides,obj).children(':eq('+(s-1)+')').css({left:s*w-w}); $(o.slides,obj).children(':eq(0)').css({left:0}); if(t===s){$(o.slides,obj).children(':eq(0)').css({left:(s*w)});} if(t===1){$(o.slides,obj).children(':eq('+(s-1)+')').css({ position:'absolute',left:-w});} $(o.slides,obj).children().fadeIn(o.fadespeed); u = false; }); break; default: break; } }; I had tried, but the auto restart didn't work! You can view the documentation and download the complete code with the examples in this link: http://github.com/nathansearles/loopedSlider/tree/master Please help me! (Sorry for my bad english!)

  Read the article

• What code in inherit part

  - by FullmetalBoy

  Problem: Having problem to find a source solution (inherit code in view state) to display data from SokningPerformSearchViewModel and its generic list in view state. Questions/request: Need to display data from my viewmodel SokningPerformSearchViewModel and its generic list as a strongly typed (if possible)? This question is a follow-up from my previous question Display a view with many to many relationship // Fullmetalboy namespace BokButik1.ViewModels { public class SokningPerformSearchViewModel { public List<BokSearchResultViewModel> Boksss { get; set; } } } namespace BokButik1.ViewModels { public class BokSearchResultViewModel { public List<Bok> Boks { get; set; } public List<Bok_Forfattare> Bok_Forfattares { get; set; } } } public class SokningController : Controller [AcceptVerbs(HttpVerbs.Post)] public ActionResult PerformSearch(string txtSearch, Kategori kategoriNummer) { Search myTest = new Search(txtSearch, kategoriNummer); SkaparListor mySkaparListor = new SkaparListor(myTest.HamtaBokListaFranSokFunktion(), myIBok_ForfattareRepository.HamtaAllaBok_ForfattareNummer()); var performViewModel = mySkaparListor.RattBokOchForfattarListaTillViewModel(); var SokningIndexViewModel = new SokningPerformSearchViewModel { Boksss = performViewModel }; return View(SokningIndexViewModel); } <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<BokButik1.ViewModels.SokningPerformSearchViewModel>" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> PerformSearch </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>PerformSearch</h2> <table> <% foreach (var bok in Model.Boksss) { %> <tr> <td><%: bok.Boks %> av</td> <td rowspan="2"><%: bok.Bok_Forfattares %></td> <td rowspan="2"><div id="Div1"><input type="submit" value="Köp" /></div></td> </tr> <tr> <td></td> </tr> <tr> <td>.. </td> </tr> <% } %> </table> </asp:Content> namespace BokButik1.Models { public class SkaparListor { private List<Bok_Forfattare> _myIBok_ForfattareRepository; private List<Bok> _Bok; private List<BokSearchResultViewModel> _ViewBokSearch; public SkaparListor(List<Bok> pSpecifikBokLista, List<Bok_Forfattare> pBok_ForfattareLista) { _Bok = pSpecifikBokLista; _myIBok_ForfattareRepository = pBok_ForfattareLista; _ViewBokSearch = new List<BokSearchResultViewModel>(); } public List<BokSearchResultViewModel> RattBokOchForfattarListaTillViewModel() { foreach (var a in _Bok) { List<Bok> aaBok = new List<Bok>(); List<Bok_Forfattare> aaBok_Forfattare = new List<Bok_Forfattare>(); BokSearchResultViewModel results = new BokSearchResultViewModel(); aaBok.Add(a); foreach (var b in _myIBok_ForfattareRepository) { if(a.BokID == b.BokID) { aaBok_Forfattare.Add(b); } } results.Boks = aaBok; results.Bok_Forfattares = aaBok_Forfattare; _ViewBokSearch.Add(results); } return _ViewBokSearch; } } // Class }

  Read the article

• How to implement rank structure

  - by Luke101

  What is the best way to implement a rank system: here is the code i will use public class MyRank { private int LevelOneMaxPoints = 100; private int LevelTwoMinPoints = 200; private int LevelTwoMaxPoints = 299; private int LevelThreeMinPoints = 300; private int LevelThreeMaxPoints = 399; private int LevelFourMinPoints = 400; private int LevelFourMaxPoints = 599; private int LevelFourPlusMinPoints = 600; private int LevelFourPlusMaxPoints = 999; private int LevelFiveMinPoints = 1000; private int LevelFiveMaxPoints = 1299; private int LevelSixMinPoints = 1300; private int LevelSixMaxPoints = 2699; private int LevelSevenMinPoints = 2700; private int LevelSevenMaxPoints = 3999; private int LevelEightMinPoints = 4000; private int LevelEightMaxPoints = 5499; private int LevelEightPlusMinPoints = 5500; private int LevelEightPlusMaxPoints = 7499; private int LevelNineMinPoints = 7500; private int LevelNineMaxPoints = 9999; private int LevelTenMinPoints = 10000; private string LevelOneName = "Private"; private string LevelTwoName = "PV2"; private string LevelThreeName = "Private Fist Class"; private string LevelFourName = "Specialist"; private string LevelFourPlusName = "Corporal"; private string LevelFiveName = "Sergeant"; //private string LevelSixName = "Staff Sergeant"; private string LevelSevenName = "Sergeant First Class"; private string LevelEightName = "Master Sergeant"; private string LevelEightPlusName = "First Sergeant"; private string LevelNineName = "Sergeant Major"; //private string LevelTenName = "Sergeant Major of the Answers"; private int points = 0; public string RankName { get; private set; } public MyRank(int points) { this.points = points; RankName = GetRankName(); } private string GetRankName() { if (points >= Int32.MinValue && points <= LevelOneMaxPoints) return LevelOneName; else if (points >= LevelTwoMinPoints && points <= LevelTwoMaxPoints) return LevelTwoName; else if (points >= LevelThreeMinPoints && points <= LevelThreeMaxPoints) return LevelThreeName; else if (points >= LevelFourMinPoints && points <= LevelFourMaxPoints) return LevelFourName; else if (points >= LevelFourPlusMinPoints && points <= LevelFourPlusMaxPoints) return LevelFourPlusName; else if (points >= LevelFiveMinPoints && points <= LevelFiveMaxPoints) return LevelFiveName; else if (points >= LevelSixMinPoints && points <= LevelSixMaxPoints) return LevelFiveName; else if (points >= LevelSevenMinPoints && points <= LevelSevenMaxPoints) return LevelSevenName; else if (points >= LevelEightMinPoints && points <= LevelEightMaxPoints) return LevelEightName; else if (points >= LevelEightPlusMinPoints && points <= LevelEightPlusMaxPoints) return LevelEightPlusName; else if (points >= LevelNineMinPoints && points <= LevelNineMaxPoints) return LevelNineName; else if (points >= LevelNineMinPoints && points <= LevelNineMaxPoints) return LevelNineName; else if (points >= LevelTenMinPoints) return LevelFourName; else return "No Rank"; } } Do you think this is the most efficient way to do this?

  Read the article

• How to handle recurring dates (dates only) in .NET?

  - by Wayne M

  I am trying to figure out a good way to handle recurring events in .NET, specifically for an ASP.NET MVC application. The idea is that a user can create an event and specify that the event can occur repeatedly after a specific interval (e.g. "every two weeks", "once a month" and so on). What would be the best way to tackle this? My brainstorming right now is to have two tables: Job and RecurringJob. Job is the "master" record and has the description of the job as well a key to what customer it's for, while RecurringJob links back to Job and has additional info on what the occurrence frequency is (e.g. 1 for "once a month") as well as the timespan (e.g. "Weekly", "Monthly"). The issue is how to determine and set the next occurrence of the job since this will have to be something that's done regularly. I've seen two trains of thought with this: This logic should either be stored in a database column and periodically updated, or calculated on the fly in the code. Any thoughts or suggestions on tackling this? Edit: this is for a subscription based web app I'm creating to let service businesses schedule their common recurring jobs easily and track their customers. So a typical use might be to create a "Cut lawn" job for Mr Smith that occurs every month The exact date isn't important - it's the ability for the customer to see that Mr Smith gets his lawn cut every month and followup with him about it. Let me rephrase the above to better convey my idea. A sample use case for the application might be as follows: User pulls up the customer record for John Smith and clicks the Add Job link. The user fills out the form to create a job with a name of "Cut lawn", a start date of 11/15/2009, and selects a checkbox indicating that this job continually occurs. The user is presented with a secondary screen asking for the job frequency. The user indicates (haven't decided how at this point - let's assume select lists) that the job occurs once a month. User clicks save. Now, when the user views the record for John Smith, they can see that he has a job, "Cut lawn", that occurs every month starting from 11/15/2009. On the main dashboard when it's one week prior to the assumed start date, the user sees the job displayed with an indicator such as "12/15/2009 - Cut lawn (John Smith)". A week before the due date someone from the company calls him up to schedule and he says he's going to be out of town until 1/1/2010, so he wants his appointment rescheduled for that date. Our user can change the date for the job to be 1/1/2010, and now the recurrence will start one month from that date (e.g. next time will be 2/1/2010). The idea behind this is that the app is targeting businesses like lawn care, plumbers, carpet cleaners and the like where the exact date isn't as important (because it can and will change as people are busy), the key thing is to give the business an indicator that Mr. Smith's monthly service is coming up, and someone should give him a call to determine when exactly it can be scheduled for. In effect give these businesses a way to track repeat business and know when it's time to followup with a customer.

  Read the article

• curl can't verify cert using capath, but can with cacert option

  - by phylae

  I am trying to use curl to connect to a site using HTTPS. But curl is failing to verify the SSL cert. $ curl --verbose --capath ./certs/ --head https://example.com/ * About to connect() to example.com port 443 (#0) * Trying 1.1.1.1... connected * Connected to example.com (1.1.1.1) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: ./certs/ * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS alert, Server hello (2): * SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed * Closing connection #0 curl: (60) SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed More details here: http://curl.haxx.se/docs/sslcerts.html curl performs SSL certificate verification by default, using a "bundle" of Certificate Authority (CA) public keys (CA certs). If the default bundle file isn't adequate, you can specify an alternate file using the --cacert option. If this HTTPS server uses a certificate signed by a CA represented in the bundle, the certificate verification probably failed due to a problem with the certificate (it might be expired, or the name might not match the domain name in the URL). If you'd like to turn off curl's verification of the certificate, use the -k (or --insecure) option. I know about the -k option. But I do actually want to verify the cert. The certs directory has been properly hashed with c_rehash . and it contains: A Verisign intermediate cert Two self-signed certs The above site should be verified with the Verisign intermediate cert. When I use the --cacert option instead (and point directly to the Verisign cert) curl is able to verify the SSL cert. $ curl --verbose --cacert ./certs/verisign-intermediate-ca.crt --head https://example.com/ * About to connect() to example.com port 443 (#0) * Trying 1.1.1.1... connected * Connected to example.com (1.1.1.1) port 443 (#0) * successfully set certificate verify locations: * CAfile: ./certs/verisign-intermediate-ca.crt CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Server finished (14): * SSLv3, TLS handshake, Client key exchange (16): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSL connection using RC4-SHA * Server certificate: * subject: C=US; ST=State; L=City; O=Company; OU=ou1; CN=example.com * start date: 2011-04-17 00:00:00 GMT * expire date: 2012-04-15 23:59:59 GMT * common name: example.com (matched) * issuer: C=US; O=VeriSign, Inc.; OU=VeriSign Trust Network; OU=Terms of use at https://www.verisign.com/rpa (c)10; CN=VeriSign Class 3 Secure Server CA - G3 * SSL certificate verify ok. > HEAD / HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > < HTTP/1.1 404 Not Found HTTP/1.1 404 Not Found < Cache-Control: must-revalidate,no-cache,no-store Cache-Control: must-revalidate,no-cache,no-store < Content-Type: text/html;charset=ISO-8859-1 Content-Type: text/html;charset=ISO-8859-1 < Content-Length: 1267 Content-Length: 1267 < Server: Jetty(7.2.2.v20101205) Server: Jetty(7.2.2.v20101205) < * Connection #0 to host example.com left intact * Closing connection #0 * SSLv3, TLS alert, Client hello (1): In addition, if I try hitting one of the sites using a self signed cert and the --capath option, it also works. (Let me know if I should post an example of that.) This implies that curl is finding the cert directory, and it is properly hash. Finally, I am able to verify the SSL cert with openssl, using its -CApath option. $ openssl s_client -CApath ./certs/ -connect example.com:443 CONNECTED(00000003) depth=3 /C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority verify return:1 depth=2 /C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=(c) 2006 VeriSign, Inc. - For authorized use only/CN=VeriSign Class 3 Public Primary Certification Authority - G5 verify return:1 depth=1 /C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 verify return:1 depth=0 /C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com verify return:1 --- Certificate chain 0 s:/C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com i:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 --- Server certificate -----BEGIN CERTIFICATE----- <cert removed> -----END CERTIFICATE----- subject=/C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com issuer=/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 --- No client certificate CA names sent --- SSL handshake has read 1563 bytes and written 435 bytes --- New, TLSv1/SSLv3, Cipher is RC4-SHA Server public key is 2048 bit Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : RC4-SHA Session-ID: D65C4C6D52E183BF1E7543DA6D6A74EDD7D6E98EB7BD4D48450885188B127717 Session-ID-ctx: Master-Key: 253D4A3477FDED5FD1353D16C1F65CFCBFD78276B6DA1A078F19A51E9F79F7DAB4C7C98E5B8F308FC89C777519C887E2 Key-Arg : None Start Time: 1303258052 Timeout : 300 (sec) Verify return code: 0 (ok) --- QUIT DONE How can I get curl to verify this cert using the --capath option?

  Read the article

• Server HTTP Load times slow?

  - by cdog5000

  Hello, My server @ codemeh.com (HTTP Server) seems to be randomly loading slowly, I cannot tell if it just my forums (http://www.codemeh.com/forums/) that are loading slowly or if the WHOLE site is just loading slowly since my forums are the largest thing on the site right now. load average: 0.02, 0.17, 0.20 That is super low to my knowledge. I have tried Google Page Analytic plug-in for FireFox to solve the problem but nothing comes up that is VERY bad. If someone could investigate this for me since I am very new at apache and server configurations. Thanks! (top): PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7493 www-data 15 0 98.2m 16m 9092 S 3 0.8 0:27.24 apache2 26429 www-data 15 0 98.2m 15m 7392 S 3 0.7 0:03.45 apache2 26477 www-data 17 0 98.2m 15m 7396 S 3 0.7 0:03.16 apache2 1 root 15 0 2468 1384 1156 S 0 0.1 0:00.49 init 1367 root 25 0 2564 816 660 S 0 0.0 0:00.00 xinetd 1526 root 15 0 29576 5420 1976 S 0 0.3 1:02.69 fail2ban-server 3703 root 15 0 13512 9312 1696 S 0 0.4 0:11.59 miniserv.pl 3915 postfix 15 0 6056 1652 1320 S 0 0.1 0:00.00 pickup 4010 root 15 0 4548 1296 972 S 0 0.1 0:37.36 ntpd 7448 root 15 0 98528 26m 20m S 0 1.3 0:00.27 apache2 7454 www-data 18 0 33580 2616 368 S 0 0.1 0:00.04 apache2 7528 www-data 18 0 108m 24m 15m S 0 1.2 0:27.60 apache2 7974 root 16 0 8700 2728 2164 S 0 0.1 0:00.08 sshd 8123 cdog5000 15 0 8832 1596 896 S 0 0.1 0:00.00 sshd 8126 cdog5000 18 0 4484 1716 1384 S 0 0.1 0:00.00 bash 8141 cdog5000 15 0 2344 980 796 R 0 0.0 0:00.11 top 13461 root 15 0 8700 2728 2164 S 0 0.1 0:00.07 sshd 13567 cdog5000 18 0 8832 1492 896 S 0 0.1 0:00.33 sshd 13569 cdog5000 18 0 4484 1728 1388 S 0 0.1 0:00.09 bash 17983 root 15 0 4392 1268 988 S 0 0.1 0:00.00 su 17987 root 15 0 4516 1752 1380 S 0 0.1 0:00.09 bash 18081 www-data 15 0 98.2m 14m 6588 S 0 0.7 0:04.91 apache2 20000 www-data 15 0 98.3m 15m 8040 S 0 0.8 0:02.45 apache2 20019 www-data 15 0 98.2m 14m 6808 S 0 0.7 0:04.97 apache2 30343 root 15 0 3964 1012 764 S 0 0.0 0:00.03 vsftpd 30382 root 15 0 2304 908 716 S 0 0.0 0:00.62 cron 30401 mysql 17 0 141m 17m 5416 S 0 0.9 1:02.20 mysqld 30424 root 15 0 5472 912 504 S 0 0.0 0:00.04 sshd 30473 syslog 15 0 1916 676 536 S 0 0.0 0:01.02 syslogd 30611 amavis 15 0 33872 25m 2292 S 0 1.2 0:03.11 amavisd-new 31890 amavis 18 0 34888 24m 1792 S 0 1.2 0:00.00 amavisd-new 31891 amavis 18 0 34888 24m 1784 S 0 1.2 0:00.00 amavisd-new 32397 clamav 18 0 104m 84m 1272 S 0 4.1 1:06.46 clamd 32563 clamav 15 0 12832 5716 4440 S 0 0.3 0:01.29 freshclam 32573 root 23 0 1892 456 372 S 0 0.0 0:00.00 courierlogger 32575 root 18 0 2096 684 544 S 0 0.0 0:00.01 authdaemond 32583 root 23 0 1892 360 284 S 0 0.0 0:00.00 courierlogger 32584 root 24 0 2000 612 516 S 0 0.0 0:00.00 couriertcpd 32598 root 23 0 1892 360 284 S 0 0.0 0:00.00 courierlogger 32599 root 25 0 2000 612 516 S 0 0.0 0:00.00 couriertcpd 32604 root 18 0 1892 460 372 S 0 0.0 0:00.00 courierlogger 32605 root 18 0 2000 624 532 S 0 0.0 0:00.00 couriertcpd 32607 root 18 0 2308 404 256 S 0 0.0 0:00.02 authdaemond 32608 root 18 0 2096 260 116 S 0 0.0 0:00.03 authdaemond 32609 root 15 0 2308 404 256 S 0 0.0 0:00.03 authdaemond 32610 root 18 0 2096 260 116 S 0 0.0 0:00.02 authdaemond 32612 root 18 0 2308 404 256 S 0 0.0 0:00.02 authdaemond 32621 root 24 0 1892 364 284 S 0 0.0 0:00.00 courierlogger 32622 root 25 0 2000 608 516 S 0 0.0 0:00.00 couriertcpd 32633 root 15 0 105m 936 716 S 0 0.0 0:02.26 nscd 32719 root 16 0 6252 1680 1344 S 0 0.1 0:01.24 master 32738 postfix 15 0 6188 1776 1400 S 0 0.1 0:00.44 qmgr 32758 postfix 15 0 6492 2564 1788 S 0 0.1 0:00.14 tlsmgr (/etc/apache2/sites-available/default): NameVirtualHost * <VirtualHost *> ServerAdmin webmaster@localhost DocumentRoot /var/www/web1/web/ <Directory /var/www/web1/web/> Options Indexes MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I have fail2ban server and I dont have any firewall at this point and time that I know of. SMF is 2.0 RC4 and apache version is 2.2.14. I run a MySQL server on another box in the same DC (Persistent Connection). I installed eAccelerator today and it didnt help.

  Read the article

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >