Search Results

Search found 1507 results on 61 pages for 'coordinates'.

Page 25/61 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • LibGDX - Textures rendering at wrong position

    - by ACluelessGuy
    Update 2: Let me further explain my problem since I think that i didn't make it clear enough: The Y-coordinates on the bottom of my screen should be 0. Instead it is the height of my screen. That means the "higher" i touch/click the screen the less my y-coordinate gets. Above that the origin is not inside my screen, atleast not the 0 y-coordinate. Original post: I'm currently developing a tower defence game for fun by using LibGDX. There are places on my map where the player is or is not allowed to put towers on. So I created different ArrayLists holding rectangles representing a tile on my map. (towerPositions) for(int i = 0; i < map.getLayers().getCount(); i++) { curLay = (TiledMapTileLayer) map.getLayers().get(i); //For all Cells of current Layer for(int k = 0; k < curLay.getWidth(); k++) { for(int j = 0; j < curLay.getHeight(); j++) { curCell = curLay.getCell(k, j); //If there is a actual cell if(curCell != null) { tileWidth = curLay.getTileWidth(); tileHeight = curLay.getTileHeight(); xTileKoord = tileWidth*k; yTileKoord = tileHeight*j; switch(curLay.getName()) { //If layer named "TowersAllowed" picked case "TowersAllowed": towerPositions.add(new Rectangle(xTileKoord, yTileKoord, tileWidth, tileHeight)); // ... AND SO ON If the player clicks on a "allowed" field later on he has the opportunity to build a tower of his coice via a menu. Now here is the problem: The towers render, but they render at wrong position. (They appear really random on the map, no certain pattern for me) for(Rectangle curRect : towerPositions) { if(curRect.contains(xCoord, yCoord)) { //Using a certain tower in this example (left the menu out if(gameControl.createTower("towerXY")) { //RenderObject is just a class holding the Texture and x/y coordinates renderList.add(new RenderObject(new Texture(Gdx.files.internal("TowerXY.png")), curRect.x, curRect.y)); } } } Later on i render it: game.batch.begin(); for(int i = 0; i < renderList.size() ; i++) { game.batch.draw(renderList.get(i).myTexture, renderList.get(i).x, renderList.get(i).y); } game.batch.end(); regards

    Read the article

  • What is the purpose of the canonical view volume?

    - by breadjesus
    I'm currently learning OpenGL and haven't been able to find an answer to this question. After the projection matrix is applied to the view space, the view space is "normalized" so that all the points lie within the range [-1, 1]. This is generally referred to as the "canonical view volume" or "normalized device coordinates". While I've found plenty of resources telling me about how this happens, I haven't seen anything about why it happens. What is the purpose of this step?

    Read the article

  • Wi-Fi triangulation using android smartphone

    - by user1887020
    How to make application for wifi triangulation using android platform? This project will be implemented inside the building. No GPS needed. Just using wifi only and doing triangulation to get the current position of the user inside the building. I got minimum 3 access point to implement it. But how to start code in android and integrate triangulation inside android coding? I got the algorithm to do it.. but is there any chance that I can get it done? Because this project is actually want to replace the floor directory board into a smartphone floor directory so that user can find their way to their room for example to the lab. public class Triangulation { public Triangulation() { int dist_1, dist_2, dist_3; //variable for the distances int x1, x2, x3; //coordinates of x int y1, y2, y3; //coordinates of y int final_dist1, final_dist2; //final distance after calc dist_1 = 1; dist_2 = 2; dist_3 = 3; x1 = 5; //test inputs x2 = 2; x3 = 4; y1 = 2; y2 = 2; y3 = 5; final_dist1 = ((dist_1 * dist_1) - (dist_2 * dist_2) – (x1 * x1) + (x2 * x2) - (y1 * y1) + (y2 * y2)) / 2; final_dist2 = ((dist_2 * dist_2) - (dist_3 * dist_3) – (x2 * x2) + (x3 * x3) - (y2 * y2) + (y3 * y3)) / 2; initial_a1 = x1 - x2; initial_a2 = x2 - x3; initial_b1 = y1 - y2; initial_b2 = y2 - y3; //-----------------------STEP 1-------------------------------------- int a1 = initial_a1 / initial_a1; int a2 = initial_a2 / initial_a1; int b1 = initial_b1 / initial_a1; int b2 = initial_b2 / initial_a1; final_dist1 /= initial_a1; final_dist2 /= initial_a1; //-----------------------STEP 2-------------------------------------- a2 = a2 -a2; final_dist2 = -(initial_a2) * final_dist1 + final_dist2; //-----------------------STEP 3-------------------------------------- a2 /= b2; final_dist2 = final_dist2 / b2; b2 /= b2; //-------------------------STEP 4----------------------------------- b1 = b1 - b1; final_dist1 = -(initial_b1) * final_dist2 + final_dist1; } }

    Read the article

  • C++: Error in Xcode; "Graph::Coordinate::Coordinate()", referenced from: ...

    - by Alexandstein
    In a program I am writing, I wrote for two classes (Coordinate, and Graph), with one of them taking the other as constructor arguments. When I try to compile it I get the following error for Graph.cpp: Undefined symbols: "Graph::Coordinate::Coordinate(double)", referenced from: Graph::Graph() in Graph.o Graph::Graph() in Graph.o "Graph::Coordinate::Coordinate()", referenced from: Graph::Graph(Graph::Coordinate, Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate, Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate)in Graph.o Graph::Graph(Graph::Coordinate)in Graph.o Graph::Graph() in Graph.o Graph::Graph() in Graph.o Graph::Graph() in Graph.o Graph::Graph() in Graph.o Graph::Graph() in Graph.o Graph::Graph() in Graph.o ld: symbol(s) not found collect2: ld returned 1 exit status I checked the code and couldn't find anything out of the ordinary. Here are the four class files: (Sorry if it's a lot of code to sift through.) Coordinate.h class Graph{ #include "Coordinate.h" public: Graph(); Graph(Coordinate); Graph(Coordinate, Coordinate); Graph(Coordinate, Coordinate, Coordinate); void setXSize(int); void setYSize(int); void setX(int); //int corresponds to coordinates 1, 2, or 3 void setY(int); void setZ(int); int getXSize(); int getYSize(); double getX(int); //int corresponds to coordinates 1, 2, or 3 double getY(int); double getZ(int); void outputGraph(); void animateGraph(); private: int xSize; int ySize; Coordinate coord1; Coordinate coord2; Coordinate coord3; }; Coordinate.cpp #include <iostream> #include "Coordinate.h" Coordinate::Coordinate() { xCoord = 1; yCoord = 1; zCoord = 1; xVel = 1; yVel = 1; zVel = 1; } Coordinate::Coordinate(double xCoo) { xCoord = xCoo; yCoord = 1; zCoord = 1; xVel = 1; yVel = 1; zVel = 1; } Coordinate::Coordinate(double xCoo,double yCoo) { xCoord = xCoo; yCoord = yCoo; zCoord = 1; xVel = 1; yVel = 1; zVel = 1; } Coordinate::Coordinate(double xCoo,double yCoo,double zCoo) { xCoord = xCoo; yCoord = yCoo; zCoord = zCoo; xVel = 1; yVel = 1; zVel = 1; } void Coordinate::setXCoord(double xCoo) { xCoord = xCoo; } void Coordinate::setYCoord(double yCoo) { yCoord = yCoo; } void Coordinate::setZCoord(double zCoo) { zCoord = zCoo; } void Coordinate::setXVel(double xVelo) { xVel = xVelo; } void Coordinate::setYVel(double yVelo) { yVel = yVelo; } void Coordinate::setZVel(double zVelo) { zVel = zVelo; } double Coordinate::getXCoord() { return xCoord; } double Coordinate::getYCoord() { return yCoord; } double Coordinate::getZCoord() { return zCoord; } double Coordinate::getXVel() { return xVel; } double Coordinate::GetYVel() { return yVel; } double Coordinate::GetZVel() { return zVel; } Graph.h class Graph{ #include "Coordinate.h" public: Graph(); Graph(Coordinate); Graph(Coordinate, Coordinate); Graph(Coordinate, Coordinate, Coordinate); void setXSize(int); void setYSize(int); void setX(int); //int corresponds to coordinates 1, 2, or 3 void setY(int); void setZ(int); int getXSize(); int getYSize(); double getX(int); //int corresponds to coordinates 1, 2, or 3 double getY(int); double getZ(int); void outputGraph(); void animateGraph(); private: int xSize; int ySize; Coordinate coord1; Coordinate coord2; Coordinate coord3; }; Graph.cpp #include "Graph.h" #include "Coordinate.h" #include <iostream> #include <ctime> using namespace std; Graph::Graph() { Coordinate coord1(0); } Graph::Graph(Coordinate cOne) { coord1 = cOne; xSize = 20; ySize = 20; } Graph::Graph(Coordinate cOne, Coordinate cTwo) { coord1 = cOne; coord2 = cTwo; xSize = 20; ySize = 20; } Graph::Graph(Coordinate cOne, Coordinate cTwo, Coordinate cThree) { coord1 = cOne; coord2 = cTwo; coord3 = cThree; xSize = 20; ySize = 20; } void Graph::setXSize(int size) { xSize = size; } void Graph::setYSize(int size) { ySize = size; } int Graph::getXSize() { return xSize; } int Graph::getYSize() { return ySize; } void Graph::outputGraph() { } void Graph::animateGraph() { } Thanks very much for any help!

    Read the article

  • CodePlex Daily Summary for Wednesday, July 24, 2013

    CodePlex Daily Summary for Wednesday, July 24, 2013Popular ReleasesGeoTransformer: GeoTransformer 4.5: Extensions can now be installed and uninstalled from the application. The extensions update the same way as the application - silently and automatically. Added ability to search for caches by pressing CTRL+F in the table views. (Thanks to JanisU for implementing this request) Added ability to remove edited customizations for multiple caches at once (use SHIFT or CTRL to select multiple lines in the table). A new experimental version for Windows 8 RT (on ARM processor) is also made availa...Kartris E-commerce: Kartris v2.5003: This fixes an issue where search engines appear to identify as IE and so trigger the noIE page if there is not a non-responsive skin specified.VG-Ripper & PG-Ripper: VG-Ripper 2.9.45: changes NEW: Added Support for "ImgBabes.com" links NEW: Added Support for "ImagesIon.com" linksFamily Tree Analyzer: Version 1.5.3.0: Added a new Lost Cousins Report to the Lost Cousins tab. This report displays colour coded boxes for each census showing whether census data has been found and entered into Lost Cousins website for all the UK census years.Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.4: Magelia WebStore version 2.4 introduces new and improved features: Basket and order calculation have been redesigned with a more modular approach geographic zone algorithms for tax and shipping calculations have been re-developed. The Store service has been split in three services (store, basket, order). Product start and end dates have been added. For variant products a unique code has been introduced for the top (variable) product, product attributes can now be defined at the top ...LINQ to Twitter: LINQ to Twitter v2.1.08: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.AndroidCopyAndPaste: Capood: Erstes Release für Evaluation --> Changeset 26675AcDown?????: AcDown????? v4.4.3: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.4.3 ?? ??Bilibili????????????? ???????????? ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2.10?...Magick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/C# Intellisense for Notepad++: Initial release: Members auto-complete Integration with native Notepad++ Auto-Completion Auto "open bracket" for methods Right-arrow to accept suggestions51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.PantheR's GraphX for .NET: GraphX for .NET v0.9.5 BETA: BETA 0.9.5 + Added GraphArea.SaveAsImage() method that supports different image formats + Added GraphArea.UseNativeObjectArrange property. True by default. If set to False it will use different coordinates handling that helps to soften vertex drag issues to the top and left area sides. + Added GraphArea.Translation property. It is needed to get correct translation coordinates when determining object position from the mouse coordinates. + Added new VertexControl.PositionChanged event along wit....NET Code Migrator for Dynamics CRM: v1.0.12: Combined the main macros, generated macros from a sample organization, and the CreateVisualStudioMacros utility into a single package.DARF: Dynamic Application Runtime Framework: DARF.Demo: This demo is DARF.IDE application plus a sample file (calculator.xda) which describes a very simple calculator. All you need to do is to unzip the package, run DARF.IDE.exe and load calculator.xda then press F5 or select 'Execute' from 'Code' menu to see the execution of the application. The calculator.xda file is fully commented so you can inspect the file and get a feeling of the way DARF works. This sample application makes use of some pre-written blocks (namely button, textbox and ...) ...Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...CodeGen Code Generator: CodeGen 4.2.11: Changes in this release include: Added several new alternate forms of the <FIELD_SELWND> token to provide template developers better control over the case of field selection window names. Also added a new token <FIELD_SELWND_ORIGINAL> to preserve the case of selection window names in the same way that <FIELD_SELWND> used to. Enhanced UI Toolkit window script selection window processing (-ws) so that selection window names are no longer case sensitive (they aren't in UI Toolkit). Also the -w...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesCommunity TFS Build Extensions: July 2013: The July 2013 release contains VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 The Community TFS Build Manager can also be found in the Visual Studio Gallery here where updates will first become available. A version supporting VS2010 is also available in the Gallery here.New Projects.NET Weaver: This project is a base project to weave code in existing assemblies.AAP WB: aam aadmi party west bengal facebook appajax call wcf: it's about how to call wcf use ajax in asp.netBMI: Test ProjectCarWebOOB: Website for learning subject about object oriented databaseCloud Ninja Polyglot Persistence: The Cloud Ninja Polyglot Persistence project is a sample that demonstrates the use of multiple and different types of repositories to persist application data.ConsoleGamePacMan: C# console Implementation of popular game Pac-MancrawlerTeam: crawlerDB-Team-Project-Mimosa: Telerik Database Project Team MimosaDemoJS: Nonedeployspsolution: powershell snapin that mimics publishing behaviour of wsp sharepoint solution in visual studio.Du Lich Thanh Nien: Du L?ch Thanh NiênElectronic Commerce Resource Planning: Electronic Commerce Resource PlanningGnuPGNotepad: A notepad based GUI for GnuPG (PGP) which allows you to Encrypt/Decrypt on the fly, or save & load encrypted to disk without using temporary clear text files.modbusclasslabrarycsharp: Summary MvcAppTestSolution: MVCNext Inventory: NextInventory is an open source application. Native in the ASP.Net MVC4.Org Chart in SharePoint 2010 using Google API.: Organization Chart webpart for SharePoint 2010 using Google API and SharePoint list as the data source. Good for small organizations with no AD hierarchy.Parsec SWTOR Parser: .NET Combat Log Parser Windows Application for SWTOR (Star Wars the Old Republic)Portable Imaging Library for .NET: Portable Imaging Library for asynchronous loading, modifying and saving images from any thread (out of UI thread for WPF/WP8).Powershell MetadataExplorer: Windows Powershell SnapIn that includes the Get-ItemMetadata cmdlet. The Get-ItemMetadata cmdlet retrieves extended metadata associated with file system items.Pseudogenerator: Pseudogenerator es un generador de numeros pseudoaleatorios compatible con una variedad de metodos de generacion. Muy util en el area de simulaciones digitales.PushIt!: Very interesting arcade game.S3Console: This project is an initiative to create shell like interactive console application to administer amazon s3 using c#.net.Sample VariableSizedWrapGrid Windows Phone: This example gives an idea of ​​how to make the size of a list item dynamically. In this case a user control that has been created by VariableSizedWrapGrid kinnSchool CMS: School CMS is a school content management system, written in PHP and run from a single MySQL Database. Anyone can use school cms.Sys: This is library of collection of most used .NET components implemented in C#VariousPublicExperiments: This project contains various experiments, publish for educational purposes. These projects may later on be branched to their own repositories.VBDownloader: *VBDownloader* _The open source solution for downloading_wechat demo: wechat demoZing State Explorer: Zing is a state explorer for models of concurrent and asynchronous programs.

    Read the article

  • Converting 2D Physics to 3D.

    - by static void main
    I'm new to game physics and I am trying to adapt a simple 2D ball simulation for a 3D simulation with the Java3D library. I have this problem: Two things: 1) I noted down the values generated by the engine: X/Y are too high and minX/minY/maxY/maxX values are causing trouble. Sometimes the balls are drawing but not moving Sometimes they are going out of the panel Sometimes they're moving on little area Sometimes they just stick at one place... 2) I'm unable to select/define/set the default correct/suitable values considering the 3D graphics scaling/resolution while they are set with respect to 2D screen coordinates, that is my only problem. Please help. This is the code: public class Ball extends GameObject { private float x, y; // Ball's center (x, y) private float speedX, speedY; // Ball's speed per step in x and y private float radius; // Ball's radius // Collision detected by collision detection and response algorithm? boolean collisionDetected = false; // If collision detected, the next state of the ball. // Otherwise, meaningless. private float nextX, nextY; private float nextSpeedX, nextSpeedY; private static final float BOX_WIDTH = 640; private static final float BOX_HEIGHT = 480; /** * Constructor The velocity is specified in polar coordinates of speed and * moveAngle (for user friendliness), in Graphics coordinates with an * inverted y-axis. */ public Ball(String name1,float x, float y, float radius, float speed, float angleInDegree, Color color) { this.x = x; this.y = y; // Convert velocity from polar to rectangular x and y. this.speedX = speed * (float) Math.cos(Math.toRadians(angleInDegree)); this.speedY = speed * (float) Math.sin(Math.toRadians(angleInDegree)); this.radius = radius; } public void move() { if (collisionDetected) { // Collision detected, use the values computed. x = nextX; y = nextY; speedX = nextSpeedX; speedY = nextSpeedY; } else { // No collision, move one step and no change in speed. x += speedX; y += speedY; } collisionDetected = false; // Clear the flag for the next step } public void collideWith() { // Get the ball's bounds, offset by the radius of the ball float minX = 0.0f + radius; float minY = 0.0f + radius; float maxX = 0.0f + BOX_WIDTH - 1.0f - radius; float maxY = 0.0f + BOX_HEIGHT - 1.0f - radius; double gravAmount = 0.9811111f; double gravDir = (90 / 57.2960285258); // Try moving one full step nextX = x + speedX; nextY = y + speedY; System.out.println("In serializedBall in collision."); // If collision detected. Reflect on the x or/and y axis // and place the ball at the point of impact. if (speedX != 0) { if (nextX > maxX) { // Check maximum-X bound collisionDetected = true; nextSpeedX = -speedX; // Reflect nextSpeedY = speedY; // Same nextX = maxX; nextY = (maxX - x) * speedY / speedX + y; // speedX non-zero } else if (nextX < minX) { // Check minimum-X bound collisionDetected = true; nextSpeedX = -speedX; // Reflect nextSpeedY = speedY; // Same nextX = minX; nextY = (minX - x) * speedY / speedX + y; // speedX non-zero } } // In case the ball runs over both the borders. if (speedY != 0) { if (nextY > maxY) { // Check maximum-Y bound collisionDetected = true; nextSpeedX = speedX; // Same nextSpeedY = -speedY; // Reflect nextY = maxY; nextX = (maxY - y) * speedX / speedY + x; // speedY non-zero } else if (nextY < minY) { // Check minimum-Y bound collisionDetected = true; nextSpeedX = speedX; // Same nextSpeedY = -speedY; // Reflect nextY = minY; nextX = (minY - y) * speedX / speedY + x; // speedY non-zero } } speedX += Math.cos(gravDir) * gravAmount; speedY += Math.sin(gravDir) * gravAmount; } public float getSpeed() { return (float) Math.sqrt(speedX * speedX + speedY * speedY); } public float getMoveAngle() { return (float) Math.toDegrees(Math.atan2(speedY, speedX)); } public float getRadius() { return radius; } public float getX() { return x; } public float getY() { return y; } public void setX(float f) { x = f; } public void setY(float f) { y = f; } } Here's how I'm drawing the balls: public class 3DMovingBodies extends Applet implements Runnable { private static final int BOX_WIDTH = 800; private static final int BOX_HEIGHT = 600; private int currentNumBalls = 1; // number currently active private volatile boolean playing; private long mFrameDelay; private JFrame frame; private int currentFrameRate; private Ball[] ball = new Ball[currentNumBalls]; private Random rand; private Sphere[] sphere = new Sphere[currentNumBalls]; private Transform3D[] trans = new Transform3D[currentNumBalls]; private TransformGroup[] objTrans = new TransformGroup[currentNumBalls]; public 3DMovingBodies() { rand = new Random(); float angleInDegree = rand.nextInt(360); setLayout(new BorderLayout()); GraphicsConfiguration config = SimpleUniverse .getPreferredConfiguration(); Canvas3D c = new Canvas3D(config); add("Center", c); ball[0] = new Ball(0.5f, 0.0f, 0.5f, 0.4f, angleInDegree, Color.yellow); // ball[1] = new Ball(1.0f, 0.0f, 0.25f, 0.8f, angleInDegree, // Color.yellow); // ball[2] = new Ball(0.0f, 1.0f, 0.15f, 0.11f, angleInDegree, // Color.yellow); trans[0] = new Transform3D(); // trans[1] = new Transform3D(); // trans[2] = new Transform3D(); sphere[0] = new Sphere(0.5f); // sphere[1] = new Sphere(0.25f); // sphere[2] = new Sphere(0.15f); // Create a simple scene and attach it to the virtual universe BranchGroup scene = createSceneGraph(); SimpleUniverse u = new SimpleUniverse(c); u.getViewingPlatform().setNominalViewingTransform(); u.addBranchGraph(scene); startSimulation(); } public BranchGroup createSceneGraph() { // Create the root of the branch graph BranchGroup objRoot = new BranchGroup(); for (int i = 0; i < currentNumBalls; i++) { // Create a simple shape leaf node, add it to the scene graph. objTrans[i] = new TransformGroup(); objTrans[i].setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); Transform3D pos1 = new Transform3D(); pos1.setTranslation(randomPos()); objTrans[i].setTransform(pos1); objTrans[i].addChild(sphere[i]); objRoot.addChild(objTrans[i]); } BoundingSphere bounds = new BoundingSphere(new Point3d(0.0, 0.0, 0.0), 100.0); Color3f light1Color = new Color3f(1.0f, 0.0f, 0.2f); Vector3f light1Direction = new Vector3f(4.0f, -7.0f, -12.0f); DirectionalLight light1 = new DirectionalLight(light1Color, light1Direction); light1.setInfluencingBounds(bounds); objRoot.addChild(light1); // Set up the ambient light Color3f ambientColor = new Color3f(1.0f, 1.0f, 1.0f); AmbientLight ambientLightNode = new AmbientLight(ambientColor); ambientLightNode.setInfluencingBounds(bounds); objRoot.addChild(ambientLightNode); return objRoot; } public void startSimulation() { playing = true; Thread t = new Thread(this); t.start(); } public void stop() { playing = false; } public void run() { long previousTime = System.currentTimeMillis(); long currentTime = previousTime; long elapsedTime; long totalElapsedTime = 0; int frameCount = 0; while (true) { currentTime = System.currentTimeMillis(); elapsedTime = (currentTime - previousTime); // elapsed time in // seconds totalElapsedTime += elapsedTime; if (totalElapsedTime > 1000) { currentFrameRate = frameCount; frameCount = 0; totalElapsedTime = 0; } for (int i = 0; i < currentNumBalls; i++) { ball[i].move(); ball[i].collideWith(); drawworld(); } try { Thread.sleep(88); } catch (Exception e) { e.printStackTrace(); } previousTime = currentTime; frameCount++; } } public void drawworld() { for (int i = 0; i < currentNumBalls; i++) { printTG(objTrans[i], "SteerTG"); trans[i].setTranslation(new Vector3f(ball[i].getX(), ball[i].getY(), 0.0f)); objTrans[i].setTransform(trans[i]); } } private Vector3f randomPos() /* * Return a random position vector. The numbers are hardwired to be within * the confines of the box. */ { Vector3f pos = new Vector3f(); pos.x = rand.nextFloat() * 5.0f - 2.5f; // -2.5 to 2.5 pos.y = rand.nextFloat() * 2.0f + 0.5f; // 0.5 to 2.5 pos.z = rand.nextFloat() * 5.0f - 2.5f; // -2.5 to 2.5 return pos; } // end of randomPos() public static void main(String[] args) { System.out.println("Program Started"); 3DMovingBodiesbb = new 3DMovingBodies(); bb.addKeyListener(bb); MainFrame mf = new MainFrame(bb, 600, 400); } }

    Read the article

  • CodePlex Daily Summary for Thursday, July 25, 2013

    CodePlex Daily Summary for Thursday, July 25, 2013Popular ReleasesEnglish Practice Helper: English Practice Helper Demo v1.0: The first demoTweetinvi a friendly C# Twitter API: Alpha 0.8.0.1: This is the first release of Tweetinvi. Please report any issue in the discussion or issues. Sincerely, LinviKartris E-commerce: Kartris v2.5003: This fixes an issue where search engines appear to identify as IE and so trigger the noIE page if there is not a non-responsive skin specified.VG-Ripper & PG-Ripper: VG-Ripper 2.9.45: changes NEW: Added Support for "ImgBabes.com" links NEW: Added Support for "ImagesIon.com" linksMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.4: Magelia WebStore version 2.4 introduces new and improved features: Basket and order calculation have been redesigned with a more modular approach geographic zone algorithms for tax and shipping calculations have been re-developed. The Store service has been split in three services (store, basket, order). Product start and end dates have been added. For variant products a unique code has been introduced for the top (variable) product, product attributes can now be defined at the top ...LogicCircuit: LogicCircuit 2.13.07.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionYou can make visual elements of the circuit been visible on its symbols. This way you can build composite displays, keyboards and reuse them. Please read about displays for more details http://ww...LINQ to Twitter: LINQ to Twitter v2.1.08: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.AcDown?????: AcDown????? v4.4.3: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.4.3 ?? ??Bilibili????????????? ???????????? ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2.10?...Magick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/C# Intellisense for Notepad++: Initial release: Members auto-complete Integration with native Notepad++ Auto-Completion Auto "open bracket" for methods Right-arrow to accept suggestions51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SMSGateWay: SMSGateWayLaunch: CMPP,SGIP,SMGP ????SP?? ??,????,????,????,VPS??,?????,???. ??????,????,?????,????......????? ????SPID ,MsgSrc,???,???IP,?????? ?????,?????,??,???? ??QQ:3483305Centrify DirectControl PowerShell Module: 1.5.709: -fix- Computer password is correctly set when preparing Computer account for Self-Service join and hostname is longer than 14 charsDLog: DLog v1.0: Log v1.0SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.PantheR's GraphX for .NET: GraphX for .NET v0.9.5 BETA: BETA 0.9.5 + Added GraphArea.SaveAsImage() method that supports different image formats + Added GraphArea.UseNativeObjectArrange property. True by default. If set to False it will use different coordinates handling that helps to soften vertex drag issues to the top and left area sides. + Added GraphArea.Translation property. It is needed to get correct translation coordinates when determining object position from the mouse coordinates. + Added new VertexControl.PositionChanged event along wit....NET Code Migrator for Dynamics CRM: v1.0.12: Combined the main macros, generated macros from a sample organization, and the CreateVisualStudioMacros utility into a single package.Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...CodeGen Code Generator: CodeGen 4.2.11: Changes in this release include: Added several new alternate forms of the <FIELD_SELWND> token to provide template developers better control over the case of field selection window names. Also added a new token <FIELD_SELWND_ORIGINAL> to preserve the case of selection window names in the same way that <FIELD_SELWND> used to. Enhanced UI Toolkit window script selection window processing (-ws) so that selection window names are no longer case sensitive (they aren't in UI Toolkit). Also the -w...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...New ProjectsActive Directory Web App Availability Monitor for SCOM 2012: Extend the web application availability monitoring in System Center Operations Manager 2012 with the ability to monitor Active Directory Authenticated Web SitesArgoWinform: ArgoWinform ASP.NET Routing Optional Parameters in body of Urls: This library allows ASP.NET MVC developers to have custom parameters in the body of Urls. Routes that are defined by this library accepts a LookupService that wAutomate Variations in SharePoint 2013 using C#: Automating variations settings and configuration so whenever a deployment is needed, you will be ready with your PowerShell scripts.Automate Variations in SharePoint 2013 using PowerShell: Automating variations settings and configuration so whenever a deployment is needed, you will be ready with your PowerShell scripts.BingosoftSwimming: ?????????ContentCreator for Orchard: Orchard Module that is suposed to replace the Orchard.ContentPicker module by letting you create contentItems directlyGET - General Emitter Templates: GET: General Emitter Templates. Language: C# Given a data file (in xml format), it models the data according with the directives specified in the template file.GTS Project: This project is a private personal educational project to study and learn DNN and ASP.NET MVCJustCompare: Just Compare is human made tool to help humans to compare two digital files. We are now concentrating on source code files only. Media Tool: A collection of tool to manage media files (Pictures and videos)MVVMlight Navigation Service for Windows Phone 8: A simple project to make navigation in MVVMlight on windows phone faster.Qibla Compass for Windows Phone: Qibla compass is one of the mostly used community applications/utility among Muslims. It allows users to determine the correct location / direction of Ka’aba.QuickWebLauncherWP: Una aplicación para windows phone para leer fuentes de sindicación y coleccionar enlaces a los artículos que se desean leerSimpleBingWallpaper: It's a simple project for get bingwallpaper. if you like it. please +1.. ThanksStyrApp: Template Application for technology testingTataFm: Tata FM for Windows 8 app.TimeZoneInfoForm: Exercises timezone related classes and methods in .NET. It can be used as sample code or to troubleshoot suspected timezone issues in .NET.Wix Test: *WIX Test Solution* - is a simple WIX solution for learning some new features. This project is currently in setup mode and free.

    Read the article

  • Code Golf: Word Search Solver

    - by Maxim Z.
    Note: This is my first Code Golf challenge/question, so I might not be using the correct format below. I'm not really sure how to tag this particular question, and should this be community wiki? Thanks! This Code Golf challenge is about solving word searches! A word search, as defined by Wikipedia, is: A word search, word find, word seek, word sleuth or mystery word puzzle is a word game that is letters of a word in a grid, that usually has a rectangular or square shape. The objective of this puzzle is to find and mark all the words hidden inside the box. The words may be horizontally, vertically or diagonally. Often a list of the hidden words is provided, but more challenging puzzles may let the player figure them out. Many word search puzzles have a theme to which all the hidden words are related. The word searches for this challenge will all be rectangular grids with a list of words to find provided. The words can be written vertically, horizontally, or diagonally. Input/Output The user inputs their word search and then inputs a word to be found in their grid. These two inputs are passed to the function that you will be writing. It is up to you how you want to declare and handle these objects. Using a strategy described below or one of your own, the function finds the specific word in the search and outputs its starting coordinates (simply row number and column number) and ending coordinates. If you find two occurrences of the word, you must output both's set of coordinates. Example Input: A I Y R J J Y T A S V Q T Z E X B X G R Z P W V T B K U F O E A F L V F J J I A G B A J K R E S U R E P U S C Y R S Y K F B B Q Y T K O I K H E W G N G L W Z F R F H L O R W A R E J A O S F U E H Q V L O A Z B J F B G I F Q X E E A L W A C F W K Z E U U R Z R T N P L D F L M P H D F W H F E C G W Z B J S V O A O Y D L M S T C R B E S J U V T C S O O X P F F R J T L C V W R N W L Q U F I B L T O O S Q V K R O W G N D B C D E J Y E L W X J D F X M Word to find: codegolf Output: row 12, column 8 --> row 5, column 1 Strategies Here are a few strategies you might consider using. It is completely up to you to decide what strategy you want to use; it doesn't have to be in this list. Looking for the first letter of the word; on each occurrence, looking at the eight surrounding letters to see whether the next letter of the word is there. Same as above, except looking for a part of a word that has two of the same letter side-by-side. Counting how often each letter of the alphabet is present in the whole grid, then selecting one of the least-occurring letters from the word you have to find and searching for the letter. On each occurrence of the letter, you look at its eight surrounding letters to see whether the next and previous letters of the word is there.

    Read the article

  • being able to solve google code jam problem sets

    - by JPro
    This is not a homework question, but rather my intention to know if this is what it takes to learn programming. I keep loggin into TopCoder not to actually participate but to get the basic understand of how the problems are solved. But to my knowledge I don't understand what the problem is and how to translate the problem into an algorithm that can solve it. Just now I happen to look at ACM ICPC 2010 World Finals which is being held in china. The teams were given problem sets and one of them is this: Given at most 100 points on a plan with distinct x-coordinates, find the shortest cycle that passes through each point exactly once, goes from the leftmost point always to the right until it reaches the rightmost point, then goes always to the left until it gets back to the leftmost point. Additionally, two points are given such that the the path from left to right contains the first point, and the path from right to left contains the second point. This seems to be a very simple DP: after processing the last k points, and with the first path ending in point a and the second path ending in point b, what is the smallest total length to achieve that? This is O(n^2) states, transitions in O(n). We deal with the two special points by forcing the first path to contain the first one, and the second path contain the second one. Now I have no idea what I am supposed to solve after reading the problem set. and there's an other one from google code jam: Problem In a big, square room there are two point light sources: one is red and the other is green. There are also n circular pillars. Light travels in straight lines and is absorbed by walls and pillars. The pillars therefore cast shadows: they do not let light through. There are places in the room where no light reaches (black), where only one of the two light sources reaches (red or green), and places where both lights reach (yellow). Compute the total area of each of the four colors in the room. Do not include the area of the pillars. Input * One line containing the number of test cases, T. Each test case contains, in order: * One line containing the coordinates x, y of the red light source. * One line containing the coordinates x, y of the green light source. * One line containing the number of pillars n. * n lines describing the pillars. Each contains 3 numbers x, y, r. The pillar is a disk with the center (x, y) and radius r. The room is the square described by 0 = x, y = 100. Pillars, room walls and light sources are all disjoint, they do not overlap or touch. Output For each test case, output: Case #X: black area red area green area yellow area Is it required that people who program should be should be able to solve these type of problems? I would apprecite if anyone can help me interpret the google code jam problem set as I wish to participate in this years Code Jam to see if I can do anthing or not. Thanks.

    Read the article

  • OpenGL-ES Texture Mapping. Texture is reversed?

    - by Feet
    I am trying to get my head around Texture mapping, I thought I had it the other day after asking this. However, I am having some trouble with my texture coordinates being flipped from what I am expecting. I am loading my texture like so int[] textures = new int[1]; gl.glGenTextures(1, textures, 0); _textureID = textures[0]; gl.glBindTexture(GL10.GL_TEXTURE_2D, _textureID); Bitmap bmp = BitmapFactory.decodeResource( _context.getResources(), R.drawable.die_1); GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bmp, 0); gl.glTexParameterx(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_LINEAR); gl.glTexParameterx(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); bmp.recycle(); My cube is this float vertices[] = { // Front face -width, -height, depth, // 0 width, -height, depth, // 1 width, height, depth, // 2 -width, height, depth, // 3 // Back Face width, -height, -depth, // 4 -width, -height, -depth, // 5 -width, height, -depth, // 6 width, height, -depth, // 7 // Left face -width, -height, -depth, // 8 -width, -height, depth, // 9 -width, height, depth, // 10 -width, height, -depth, // 11 // Right face width, -height, depth, // 12 width, -height, -depth, // 13 width, height, -depth, // 14 width, height, depth, // 15 // Top face -width, height, depth, // 16 width, height, depth, // 17 width, height, -depth, // 18 -width, height, -depth, // 19 // Bottom face -width, -height, -depth, // 20 width, -height, -depth, // 21 width, -height, depth, // 22 -width, -height, depth, // 23 }; short indices[] = { // Front 0,1,2, 0,2,3, // Back 4,5,6, 4,6,7, // Left 8,9,10, 8,10,11, // Right 12,13,14, 12,14,15, // Top 16,17,18, 16,18,19, // Bottom 20,21,22, 20,22,23, }; float texCoords[] = { // Front face textured only, for simplicity 0.0f, 1.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f}; And it is drawn like so // Counter-clockwise winding. gl.glFrontFace(GL10.GL_CCW); // Enable face culling. gl.glEnable(GL10.GL_CULL_FACE); // What faces to remove with the face culling. gl.glCullFace(GL10.GL_BACK); // Enabled the vertices buffer for writing and to be used during // rendering. gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); // Specifies the location and data format of an array of vertex // coordinates to use when rendering. gl.glVertexPointer(3, GL10.GL_FLOAT, 0, verticesBuffer); if (normalsBuffer != null) { // Enabled the normal buffer for writing and to be used during rendering. gl.glEnableClientState(GL10.GL_NORMAL_ARRAY); // Specifies the location and data format of an array of normals to use when rendering. gl.glNormalPointer(GL10.GL_FLOAT, 0, normalsBuffer); } // Set flat color gl.glColor4f(rgba[0], rgba[1], rgba[2], rgba[3]); // Smooth color if ( colorBuffer != null ) { // Enable the color array buffer to be used during rendering. gl.glEnableClientState(GL10.GL_COLOR_ARRAY); // Point out the where the color buffer is. gl.glColorPointer(4, GL10.GL_FLOAT, 0, colorBuffer); } // Use textures? if ( textureBuffer != null) { gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glEnable(GL10.GL_TEXTURE_2D); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer); } // Translation and rotation before drawing gl.glTranslatef(x, y, z); gl.glRotatef(rx, 1, 0, 0); gl.glRotatef(ry, 0, 1, 0); gl.glRotatef(rz, 0, 0, 1); gl.glDrawElements(GL10.GL_TRIANGLES, numOfIndices, GL10.GL_UNSIGNED_SHORT, indicesBuffer); // Disable the vertices buffer. gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); gl.glDisableClientState(GL10.GL_NORMAL_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); // Disable face culling. gl.glDisable(GL10.GL_CULL_FACE); However my front face looks like this I also add, I haven't got any normals set, are textures affected by normals? float texCoords[] = { // Front 1.0f, 1.0f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f} It seems as if the texture is being flipped, so the coordinates don't match up properly?

    Read the article

  • How to add the coding for displaying the address when a particular set of latitude and longitude is

    - by KKC
    import com.google.android.maps.GeoPoint; import com.google.android.maps.MapActivity; import com.google.android.maps.MapController; import com.google.android.maps.MapView; import android.os.Bundle; import android.view.KeyEvent; import android.view.View; import android.widget.AdapterView; import android.widget.ArrayAdapter; import android.widget.Spinner; import android.widget.AdapterView.OnItemSelectedListener; public class PopularAttractions extends MapActivity { private String[ ][ ] locations = { {"Singapore Zoological Garden","1.40502,103.793449"}, {"Singapore Night Safari","1.4037,103.789467"}, {"Jurong BirdPark","1.32005,103.707153"}, {"Jurong Reptile Park","1.321177,103.708486"}, {"Singapore Botanic Garden","1.31471,103.815689"}, {"Sungei Buloh Wetland Reserver","1.445144,103.729595"}, {"Escape Theme Park","1.38104,103.936928"}, {"Snow City","1.32823,103.74263"}, {"Super Ice World","1.300422,103.875348"}, {"Chinatown Heritage Center","1.2836,103.84425"}, {"Singapore Science Center","1.3249,103.740578"}, {"Red Dot Design Museum","1.277762,103.846225"}, {"G-Max Reverse Bungy","1.2906,103.845322"}, {"NEWater Visitor Center","1.33105,103.955311"} }; private Spinner spinnerView; private MapView mapView; private MapController mc; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); spinnerView = (Spinner) this.findViewById(R.id.spinner1); mapView = (MapView) findViewById(R.id.mapview1); mc = mapView.getController(); ArrayAdapter<CharSequence> adapter = new ArrayAdapter<CharSequence>(this, android.R.layout.simple_spinner_dropdown_item); //--add the various locations--- for(int i = 0; i < locations.length; i++) adapter.add(locations[i][0]); adapter.setDropDownViewResource( android.R.layout.simple_spinner_dropdown_item); spinnerView.setAdapter(adapter); spinnerView.setOnItemSelectedListener(selectListener); gotoSelected(); } //---when user selects an item--- private OnItemSelectedListener selectListener = new OnItemSelectedListener() { //---these are two methods you need to implement--- public void onItemSelected( AdapterView<?>parent, View v, int position, long id) { gotoSelected(); } public void onNothingSelected(AdapterView<?> arg0) {} }; //---when an item has been selected--- public void gotoSelected() { int index = spinnerView.getSelectedItemPosition(); String[] coordinates = locations[index][1].split(","); double lat = Double.parseDouble(coordinates[0]); double lng = Double.parseDouble(coordinates[1]); GeoPoint location = new GeoPoint ( (int)(lat * 1E6), (int)(lng * 1E6)); mc.animateTo(location); mc.setZoom(16); if (mapView.isSatellite()) mapView.setSatellite(false); else mapView.setStreetView(true); mapView.invalidate(); } public boolean onKeyDown(int keyCode, KeyEvent event) { MapController mc = mapView.getController(); switch (keyCode) { case KeyEvent.KEYCODE_3: mc.zoomIn(); break; case KeyEvent.KEYCODE_1: mc.zoomOut(); break; } return super.onKeyDown(keyCode, event); } @Override protected boolean isRouteDisplayed(){ //TODO Auto-generated method sub return false; } }

    Read the article

  • Restart program from a certain line with an if statement?

    - by user1744093
    could anyone help me restart my program from line 46 if the user enters 1 (just after the comment where it states that the next code is going to ask the user for 2 inputs) and if the user enters -1 end it. I cannot think how to do it. I'm new to C# any help you could give would be great! class Program { static void Main(string[] args) { //Displays data in correct Format List<float> inputList = new List<float>(); TextReader tr = new StreamReader("c:/users/tom/documents/visual studio 2010/Projects/DistanceCalculator3/DistanceCalculator3/TextFile1.txt"); String input = Convert.ToString(tr.ReadToEnd()); String[] items = input.Split(','); Console.WriteLine("Point Latitude Longtitude Elevation"); for (int i = 0; i < items.Length; i++) { if (i % 3 == 0) { Console.Write((i / 3) + "\t\t"); } Console.Write(items[i]); Console.Write("\t\t"); if (((i - 2) % 3) == 0) { Console.WriteLine(); } } Console.WriteLine(); Console.WriteLine(); // Ask for two inputs from the user which is then converted into 6 floats and transfered in class Coordinates Console.WriteLine("Please enter the two points that you wish to know the distance between:"); string point = Console.ReadLine(); string[] pointInput = point.Split(' '); int pointNumber = Convert.ToInt16(pointInput[0]); int pointNumber2 = Convert.ToInt16(pointInput[1]); Coordinates distance = new Coordinates(); distance.latitude = (Convert.ToDouble(items[pointNumber * 3])); distance.longtitude = (Convert.ToDouble(items[(pointNumber * 3) + 1])); distance.elevation = (Convert.ToDouble(items[(pointNumber * 3) + 2])); distance.latitude2 = (Convert.ToDouble(items[pointNumber2 * 3])); distance.longtitude2 = (Convert.ToDouble(items[(pointNumber2 * 3) + 1])); distance.elevation2 = (Convert.ToDouble(items[(pointNumber2 * 3) + 2])); //Calculate the distance between two points const double PIx = 3.141592653589793; const double RADIO = 6371; double dlat = ((distance.latitude2) * (PIx / 180)) - ((distance.latitude) * (PIx / 180)); double dlon = ((distance.longtitude2) * (PIx / 180)) - ((distance.longtitude) * (PIx / 180)); double a = (Math.Sin(dlat / 2) * Math.Sin(dlat / 2)) + Math.Cos((distance.latitude) * (PIx / 180)) * Math.Cos((distance.latitude2) * (PIx / 180)) * (Math.Sin(dlon / 2) * Math.Sin(dlon / 2)); double angle = 2 * Math.Atan2(Math.Sqrt(a), Math.Sqrt(1 - a)); double ultimateDistance = (angle * RADIO); Console.WriteLine("The distance between your two points is..."); Console.WriteLine(ultimateDistance); //Repeat the program if the user enters 1, end the program if the user enters -1 Console.WriteLine("If you wish to calculate another distance type 1 and return, if you wish to end the program, type -1."); Console.ReadLine(); if (Convert.ToInt16(Console.ReadLine()) == 1); { //here is where I need it to repeat }

    Read the article

  • Problem with the output of Jquery function .offset in IE

    - by vandalk
    Hello! I'm new to jquery and javascript, and to web site developing overall, and I'm having a problem with the .offset function. I have the following code working fine on chrome and FF but not working on IE: $(document).keydown(function(k){ var keycode=k.which; var posk=$('html').offset(); var centeryk=screen.availHeight*0.4; var centerxk=screen.availWidth*0.4; $("span").text(k.which+","+posk.top+","+posk.left); if (keycode==37){ k.preventDefault(); $("html,body").stop().animate({scrollLeft:-1*posk.left-centerxk}) }; if (keycode==38){ k.preventDefault(); $("html,body").stop().animate({scrollTop:-1*posk.top-centeryk}) }; if (keycode==39){ k.preventDefault(); $("html,body").stop().animate({scrollLeft:-1*posk.left+centerxk}) }; if (keycode==40){ k.preventDefault(); $("html,body").stop().animate({scrollTop:-1*posk.top+centeryk}) }; }); hat I want it to do is to scroll the window a set percentage using the arrow keys, so my thought was to find the current coordinates of the top left corner of the document and add a percentage relative to the user screen to it and animate the scroll so that the content don't jump and the user looses focus from where he was. The $("span").text are just so I know what's happening and will be turned into comments when the code is complete. So here is what happens, on Chrome and Firefox the output of the $("span").text for the position variables is correct, starting at 0,0 and always showing how much of the content was scrolled in coordinates, but on IE it starts on -2,-2 and never gets out of it, even if I manually scroll the window until the end of it and try using the right arrow key it will still return the initial value of -2,-2 and scroll back to the beggining. I tried substituting the offset for document.body.scrollLetf and scrollTop but the result is the same, only this time the coordinates are 0,0. Am I doing something wrong? Or is this some IE bug? Is there a way around it or some other function I can use and achieve the same results? On another note, I did other two navigating options for the user in this section of the site, one is to click and drag anywhere on the screen to move it: $("html").mousedown(function(e) { var initx=e.pageX var inity=e.pageY $(document).mousemove(function(n) { var x_inc= initx-n.pageX; var y_inc= inity-n.pageY; window.scrollBy(x_inc*0.7,y_inc*0.7); initx=n.pageX; inity=n.pageY //$("span").text(initx+ "," +inity+ "," +x_inc+ "," +y_inc+ "," +e.pageX+ "," +e.pageY+ "," +n.pageX+ "," +n.pageY); // cancel out any text selections document.body.focus(); // prevent text selection in IE document.onselectstart = function () { return false; }; // prevent IE from trying to drag an image document.ondragstart = function() { return false; }; // prevent text selection (except IE) return false; }); }); $("html").mouseup(function() { $(document).unbind('mousemove'); }); The only part of this code I didn't write was the preventing text selection lines, these ones I found in a tutorial about clicking and draging objects, anyway, this code works fine on Chrome, FireFox and IE, though on Firefox and IE it's more often to happen some moviment glitches while you drag, sometimes it seems the "scrolling" is a litlle jagged, it's only a visual thing and not that much significant but if there's a way to prevent it I would like to know.

    Read the article

  • plotting multiple google maps to page

    - by Roland
    I'm trying to append more than one Google Map to a page. But it seems like I'm having some trouble. This would be the template I'm using to ( with Handlebars.js ) to create the same block more than once, about 50 times : <script type="text/x-handlebars-template"> {{#each productListing}} <div class="product-listing-wrapper"> <div class="product-listing"> <div class="left-side-content"> <div class="thumb-wrapper" data-image-link="{{ThumbnailUrl}}"> <i class="thumb"> <img src="{{ThumbnailUrl}}" alt="Thumb"> <span class="zoom-image"></span> </i> </div> <div class="google-maps-wrapper"> <div class="google-coordonates-wrapper"> <div class="google-coordonates"> <p>{{LatLon.Lat}}</p> <p>{{LatLon.Lon}}</p> </div> </div> <div class="google-maps-button"> <a class="google-maps" href="#">Google Maps</a> </div> </div> </div> <div class="right-side-content"> <div class="map-canvas-wrapper"> <div id="map-canvas" class="map-canvas" data-latitude="{{LatLon.Lat}}" data-longitude="{{LatLon.Lon}}"></div> </div> <div class="content-wrapper"></div> </div> </div> </div> {{/each}} And I'm trying to append the map to the #map-canvas id. With the following block of code I'm doing the plotting : Cluster.prototype.initiate_map_assembling = function() { return $(this.map_canvas_wrapper_class).each(function(index, element) { var canvas = $(element).children(); var latitude = $(canvas).attr('data-latitude'); var longitude = $(canvas).attr('data-longitude'); var coordinates = new google.maps.LatLng(latitude, longitude); var options = { zoom: 9, center: coordinates, mapTypeId: google.maps.MapTypeId.ROADMAP }; var map = new google.maps.Map($(canvas), options); var marker = new google.maps.Marker({ position: coordinates, map: map }); }); }; This way I'm "looping" through all the parent classes of the id I'm trying to append the map to, but the map would only append to the first id. I tried to append it to all of the id's in other ways but with the same results. So what would you suggest me to do to make it work as I would expect it, append the map to each of the id's ?

    Read the article

  • Fastest pathfinding for static node matrix

    - by Sean Martin
    I'm programming a route finding routine in VB.NET for an online game I play, and I'm searching for the fastest route finding algorithm for my map type. The game takes place in space, with thousands of solar systems connected by jump gates. The game devs have provided a DB dump containing a list of every system and the systems it can jump to. The map isn't quite a node tree, since some branches can jump to other branches - more of a matrix. What I need is a fast pathfinding algorithm. I have already implemented an A* routine and a Dijkstra's, both find the best path but are too slow for my purposes - a search that considers about 5000 nodes takes over 20 seconds to compute. A similar program on a website can do the same search in less than a second. This website claims to use D*, which I have looked into. That algorithm seems more appropriate for dynamic maps rather than one that does not change - unless I misunderstand it's premise. So is there something faster I can use for a map that is not your typical tile/polygon base? GBFS? Perhaps a DFS? Or have I likely got some problem with my A* - maybe poorly chosen heuristics or movement cost? Currently my movement cost is the length of the jump (the DB dump has solar system coordinates as well), and the heuristic is a quick euclidean calculation from the node to the goal. In case anyone has some optimizations for my A*, here is the routine that consumes about 60% of my processing time, according to my profiler. The coordinateData table contains a list of every system's coordinates, and neighborNode.distance is the distance of the jump. Private Function findDistance(ByVal startSystem As Integer, ByVal endSystem As Integer) As Integer 'hCount += 1 'If hCount Mod 0 = 0 Then 'Return hCache 'End If 'Initialize variables to be filled Dim x1, x2, y1, y2, z1, z2 As Integer 'LINQ queries for solar system data Dim systemFromData = From result In jumpDataDB.coordinateDatas Where result.systemId = startSystem Select result.x, result.y, result.z Dim systemToData = From result In jumpDataDB.coordinateDatas Where result.systemId = endSystem Select result.x, result.y, result.z 'LINQ execute 'Fill variables with solar system data for from and to system For Each solarSystem In systemFromData x1 = (solarSystem.x) y1 = (solarSystem.y) z1 = (solarSystem.z) Next For Each solarSystem In systemToData x2 = (solarSystem.x) y2 = (solarSystem.y) z2 = (solarSystem.z) Next Dim x3 = Math.Abs(x1 - x2) Dim y3 = Math.Abs(y1 - y2) Dim z3 = Math.Abs(z1 - z2) 'Calculate distance and round 'Dim distance = Math.Round(Math.Sqrt(Math.Abs((x1 - x2) ^ 2) + Math.Abs((y1 - y2) ^ 2) + Math.Abs((z1 - z2) ^ 2))) Dim distance = firstConstant * Math.Min(secondConstant * (x3 + y3 + z3), Math.Max(x3, Math.Max(y3, z3))) 'Dim distance = Math.Abs(x1 - x2) + Math.Abs(z1 - z2) + Math.Abs(y1 - y2) 'hCache = distance Return distance End Function And the main loop, the other 30% 'Begin search While openList.Count() != 0 'Set current system and move node to closed currentNode = lowestF() move(currentNode.id) For Each neighborNode In neighborNodes If Not onList(neighborNode.toSystem, 0) Then If Not onList(neighborNode.toSystem, 1) Then Dim newNode As New nodeData() newNode.id = neighborNode.toSystem newNode.parent = currentNode.id newNode.g = currentNode.g + neighborNode.distance newNode.h = findDistance(newNode.id, endSystem) newNode.f = newNode.g + newNode.h newNode.security = neighborNode.security openList.Add(newNode) shortOpenList(OLindex) = newNode.id OLindex += 1 Else Dim proposedG As Integer = currentNode.g + neighborNode.distance If proposedG < gValue(neighborNode.toSystem) Then changeParent(neighborNode.toSystem, currentNode.id, proposedG) End If End If End If Next 'Check to see if done If currentNode.id = endSystem Then Exit While End If End While If clarification is needed on my spaghetti code, I'll try to explain.

    Read the article

  • Problems implementing a screen space shadow ray tracing shader

    - by Grieverheart
    Here I previously asked for the possibility of ray tracing shadows in screen space in a deferred shader. Several problems were pointed out. One of the most important problem is that only visible objects can cast shadows and objects between the camera and the shadow caster can interfere. Still I thought it'd be a fun experiment. The idea is to calculate the view coordinates of pixels and cast a ray to the light. The ray is then traced pixel by pixel to the light and its depth is compared with the depth at the pixel. If a pixel is in front of the ray, a shadow is casted at the original pixel. At first I thought that I could use the DDA algorithm in 2D to calculate the distance 't' (in p = o + t d, where o origin, d direction) to the next pixel and use it in the 3D ray equation to find the ray's z coordinate at that pixel's position. For the 2D ray, I would use the projected and biased 3D ray direction and origin. The idea was that 't' would be the same in both 2D and 3D equations. Unfortunately, this is not the case since the projection matrix is 4D. Thus, some tweak needs to be done to make this work this way. I would like to ask if someone knows of a way to do what I described above, i.e. from a 2D ray in texture coordinate space to get the 3D ray in screen space. I did implement a simple version of the idea which you can see in the following video: video here Shadows may seem a bit pixelated, but that's mostly because of the size of the step in 't' I chose. And here is the shader: #version 330 core uniform sampler2D DepthMap; uniform vec2 projAB; uniform mat4 projectionMatrix; const vec3 light_p = vec3(-30.0, 30.0, -10.0); noperspective in vec2 pass_TexCoord; smooth in vec3 viewRay; layout(location = 0) out float out_AO; vec3 CalcPosition(void){ float depth = texture(DepthMap, pass_TexCoord).r; float linearDepth = projAB.y / (depth - projAB.x); vec3 ray = normalize(viewRay); ray = ray / ray.z; return linearDepth * ray; } void main(void){ vec3 origin = CalcPosition(); if(origin.z < -60) discard; vec2 pixOrigin = pass_TexCoord; //tex coords vec3 dir = normalize(light_p - origin); vec2 texel_size = vec2(1.0 / 600.0); float t = 0.1; ivec2 pixIndex = ivec2(pixOrigin / texel_size); out_AO = 1.0; while(true){ vec3 ray = origin + t * dir; vec4 temp = projectionMatrix * vec4(ray, 1.0); vec2 texCoord = (temp.xy / temp.w) * 0.5 + 0.5; ivec2 newIndex = ivec2(texCoord / texel_size); if(newIndex != pixIndex){ float depth = texture(DepthMap, texCoord).r; float linearDepth = projAB.y / (depth - projAB.x); if(linearDepth > ray.z + 0.1){ out_AO = 0.2; break; } pixIndex = newIndex; } t += 0.5; if(texCoord.x < 0 || texCoord.x > 1.0 || texCoord.y < 0 || texCoord.y > 1.0) break; } } As you can see, here I just increment 't' by some arbitrary factor, calculate the 3D ray and project it to get the pixel coordinates, which is not really optimal. Hopefully, I would like to optimize the code as much as possible and compare it with shadow mapping and how it scales with the number of lights. PS: Keep in mind that I reconstruct position from depth by interpolating rays through a full screen quad.

    Read the article

  • Collision detection via adjacent tiles - sprite too big

    - by BlackMamba
    I have managed to create a collision detection system for my tile-based jump'n'run game (written in C++/SFML), where I check on each update what values the surrounding tiles of the player contain and then I let the player move accordingly (i. e. move left when there is an obstacle on the right side). This works fine when the player sprite is not too big: Given a tile size of 5x5 pixels, my solution worked quite fine with a spritesize of 3x4 and 5x5 pixels. My problem is that I actually need the player to be quite gigantic (34x70 pixels given the same tilesize). When I try this, there seems to be an invisible, notably smaller boundingbox where the player collides with obstacles, the player also seems to shake strongly. Here some images to explain what I mean: Works: http://tinypic.com/r/207lvfr/8 Doesn't work: http://tinypic.com/r/2yuk02q/8 Another example of non-functioning: http://tinypic.com/r/kexbwl/8 (the player isn't falling, he stays there in the corner) My code for getting the surrounding tiles looks like this (I removed some parts to make it better readable): std::vector<std::map<std::string, int> > Game::getSurroundingTiles(sf::Vector2f position) { // converting the pixel coordinates to tilemap coordinates sf::Vector2u pPos(static_cast<int>(position.x/tileSize.x), static_cast<int>(position.y/tileSize.y)); std::vector<std::map<std::string, int> > surroundingTiles; for(int i = 0; i < 9; ++i) { // calculating the relative position of the surrounding tile(s) int c = i % 3; int r = static_cast<int>(i/3); // we subtract 1 to place the player in the middle of the 3x3 grid sf::Vector2u tilePos(pPos.x + (c - 1), pPos.y + (r - 1)); // this tells us what kind of block this tile is int tGid = levelMap[tilePos.y][tilePos.x]; // converts the coords from tile to world coords sf::Vector2u tileRect(tilePos.x*5, tilePos.y*5); // storing all the information std::map<std::string, int> tileDict; tileDict.insert(std::make_pair("gid", tGid)); tileDict.insert(std::make_pair("x", tileRect.x)); tileDict.insert(std::make_pair("y", tileRect.y)); // adding the stored information to our vector surroundingTiles.push_back(tileDict); } // I organise the map so that it is arranged like the following: /* * 4 | 1 | 5 * -- -- -- * 2 | / | 3 * -- -- -- * 6 | 0 | 7 * */ return surroundingTiles; } I then check in a loop through the surrounding tiles, if there is a 1 as gid (indicates obstacle) and then check for intersections with that adjacent tile. The problem I just can't overcome is that I think that I need to store the values of all the adjacent tiles and then check for them. How? And may there be a better solution? Any help is appreciated. P.S.: My implementation derives from this blog entry, I mostly just translated it from Objective-C/Cocos2d.

    Read the article

  • Incorrect lighting results with deferred rendering

    - by Lasse
    I am trying to render a light-pass to a texture which I will later apply on the scene. But I seem to calculate the light position wrong. I am working on view-space. In the image above, I am outputting the attenuation of a point light which is currently covering the whole screen. The light is at 0,10,0 position, and I transform it to view-space first: Vector4 pos; Vector4 tmp = new Vector4 (light.Position, 1); // Transform light position for shader Vector4.Transform (ref tmp, ref Camera.ViewMatrix, out pos); shader.SendUniform ("LightViewPosition", ref pos); Now to me that does not look as it should. What I think it should look like is that the white area should be on the center of the scene. The camera is at the corner of the scene, and it seems as if the light would move along with the camera. Here's the fragment shader code: void main(){ // default black color vec3 color = vec3(0); // Pixel coordinates on screen without depth vec2 PixelCoordinates = gl_FragCoord.xy / ScreenSize; // Get pixel position using depth from texture vec4 depthtexel = texture( DepthTexture, PixelCoordinates ); float depthSample = unpack_depth(depthtexel); // Get pixel coordinates on camera-space by multiplying the // coordinate on screen-space by inverse projection matrix vec4 world = (ImP * RemapMatrix * vec4(PixelCoordinates, depthSample, 1.0)); // Undo the perspective calculations vec3 pixelPosition = (world.xyz / world.w) * 3; // How far the light should reach from it's point of origin float lightReach = LightColor.a / 2; // Vector in between light and pixel vec3 lightDir = (LightViewPosition.xyz - pixelPosition); float lightDistance = length(lightDir); vec3 lightDirN = normalize(lightDir); // Discard pixels too far from light source //if(lightReach < lightDistance) discard; // Get normal from texture vec3 normal = normalize((texture( NormalTexture, PixelCoordinates ).xyz * 2) - 1); // Half vector between the light direction and eye, used for specular component vec3 halfVector = normalize(lightDirN + normalize(-pixelPosition)); // Dot product of normal and light direction float NdotL = dot(normal, lightDirN); float attenuation = pow(lightReach / lightDistance, LightFalloff); // If pixel is lit by the light if(NdotL > 0) { // I have moved stuff from here to above so I can debug them. // Diffuse light color color += LightColor.rgb * NdotL * attenuation; // Specular light color color += LightColor.xyz * pow(max(dot(halfVector, normal), 0.0), 4.0) * attenuation; } RT0 = vec4(color, 1); //RT0 = vec4(pixelPosition, 1); //RT0 = vec4(depthSample, depthSample, depthSample, 1); //RT0 = vec4(NdotL, NdotL, NdotL, 1); RT0 = vec4(attenuation, attenuation, attenuation, 1); //RT0 = vec4(lightReach, lightReach, lightReach, 1); //RT0 = depthtexel; //RT0 = 100 / vec4(lightDistance, lightDistance, lightDistance, 1); //RT0 = vec4(lightDirN, 1); //RT0 = vec4(halfVector, 1); //RT0 = vec4(LightColor.xyz,1); //RT0 = vec4(LightViewPosition.xyz/100, 1); //RT0 = vec4(LightPosition.xyz, 1); //RT0 = vec4(normal,1); } What am I doing wrong here?

    Read the article

  • FBX Importer - Texture Name

    - by CmasterG
    I have a problem with the FBX SDK. I read in the data for the vertex position and the uv coordinates. It works fine, but now I want to read for each polygon to which texture it belongs, so that I can have models with multiple textures. Can anyone tell me how I can get the texture name (file name) for my polygon. My code to read in vertex position and uv coordinates is the following: int i, j, lPolygonCount = pMesh->GetPolygonCount(); FbxVector4* lControlPoints = pMesh->GetControlPoints(); int vertexId = 0; for (i = 0; i < lPolygonCount; i++) { int lPolygonSize = pMesh->GetPolygonSize(i); for (j = 0; j < lPolygonSize; j++) { int lControlPointIndex = pMesh->GetPolygonVertex(i, j); FbxVector4 pos = lControlPoints[lControlPointIndex]; current_model[vertex_index].x = pos.mData[0] - pivot_offset[0]; current_model[vertex_index].y = pos.mData[1] - pivot_offset[1]; current_model[vertex_index].z = pos.mData[2]- pivot_offset[2]; FbxVector4 vertex_normal; pMesh->GetPolygonVertexNormal(i,j, vertex_normal); current_model[vertex_index].nx = vertex_normal.mData[0]; current_model[vertex_index].ny = vertex_normal.mData[1]; current_model[vertex_index].nz = vertex_normal.mData[2]; //read in UV data FbxStringList lUVSetNameList; pMesh->GetUVSetNames(lUVSetNameList); //get lUVSetIndex-th uv set const char* lUVSetName = lUVSetNameList.GetStringAt(0); const FbxGeometryElementUV* lUVElement = pMesh->GetElementUV(lUVSetName); if(!lUVElement) continue; // only support mapping mode eByPolygonVertex and eByControlPoint if( lUVElement->GetMappingMode() != FbxGeometryElement::eByPolygonVertex && lUVElement->GetMappingMode() != FbxGeometryElement::eByControlPoint ) return; //index array, where holds the index referenced to the uv data const bool lUseIndex = lUVElement->GetReferenceMode() != FbxGeometryElement::eDirect; const int lIndexCount= (lUseIndex) ? lUVElement->GetIndexArray().GetCount() : 0; FbxVector2 lUVValue; //get the index of the current vertex in control points array int lPolyVertIndex = pMesh->GetPolygonVertex(i,j); //the UV index depends on the reference mode //int lUVIndex = lUseIndex ? lUVElement->GetIndexArray().GetAt(lPolyVertIndex) : lPolyVertIndex; int lUVIndex = pMesh->GetTextureUVIndex(i, j); lUVValue = lUVElement->GetDirectArray().GetAt(lUVIndex); current_model[vertex_index].tu = (float)lUVValue.mData[0]; current_model[vertex_index].tv = (float)lUVValue.mData[1]; vertex_index ++; } } float v1[3], v2[3], v3[3]; v1[0] = current_model[vertex_index - 3].x; v1[1] = current_model[vertex_index - 3].y; v1[2] = current_model[vertex_index - 3].z; v2[0] = current_model[vertex_index - 2].x; v2[1] = current_model[vertex_index - 2].y; v2[2] = current_model[vertex_index - 2].z; v3[0] = current_model[vertex_index - 1].x; v3[1] = current_model[vertex_index - 1].y; v3[2] = current_model[vertex_index - 1].z; collision_model->addTriangle(v1,v2,v3);

    Read the article

  • Direct3D - Zooming into Mouse Position

    - by roohan
    I'm trying to implement my camera class for a simulation. But I cant figure out how to zoom into my world based on the mouse position. I mean the object under the mouse cursor should remain at the same screen position. My zooming looks like this: VOID ZoomIn(D3DXMATRIX& WorldMatrix, FLOAT const& MouseX, FLOAT const& MouseY) { this->Position.z = this->Position.z * 0.9f; D3DXMatrixLookAtLH(&this->ViewMatrix, &this->Position, &this->Target, &this->UpDirection); } I passed the world matrix to the function because I had the idea to move my drawing origin according to the mouse position. But I cant find out how to calculate the offset in to move my drawing origin. Anyone got an idea how to calculate this? Thanks in advance. SOLVED Ok I solved my problem. Here is the code if anyone is interested: VOID CAMERA2D::ZoomIn(FLOAT const& MouseX, FLOAT const& MouseY) { // Get the setting of the current view port. D3DVIEWPORT9 ViewPort; this->Direct3DDevice->GetViewport(&ViewPort); // Convert the screen coordinates of the mouse to world space coordinates. D3DXVECTOR3 VectorOne; D3DXVECTOR3 VectorTwo; D3DXVec3Unproject(&VectorOne, &D3DXVECTOR3(MouseX, MouseY, 0.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); D3DXVec3Unproject(&VectorTwo, &D3DXVECTOR3(MouseX, MouseY, 1.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); // Calculate the resulting vector components. float WorldZ = 0.0f; float WorldX = ((WorldZ - VectorOne.z) * (VectorTwo.x - VectorOne.x)) / (VectorTwo.z - VectorOne.z) + VectorOne.x; float WorldY = ((WorldZ - VectorOne.z) * (VectorTwo.y - VectorOne.y)) / (VectorTwo.z - VectorOne.z) + VectorOne.y; // Move the camera into the screen. this->Position.z = this->Position.z * 0.9f; D3DXMatrixLookAtLH(&this->ViewMatrix, &this->Position, &this->Target, &this->UpDirection); // Calculate the world space vector again based on the new view matrix, D3DXVec3Unproject(&VectorOne, &D3DXVECTOR3(MouseX, MouseY, 0.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); D3DXVec3Unproject(&VectorTwo, &D3DXVECTOR3(MouseX, MouseY, 1.0f), &ViewPort, &this->ProjectionMatrix, &this->ViewMatrix, &WorldMatrix); // Calculate the resulting vector components. float WorldZ2 = 0.0f; float WorldX2 = ((WorldZ2 - VectorOne.z) * (VectorTwo.x - VectorOne.x)) / (VectorTwo.z - VectorOne.z) + VectorOne.x; float WorldY2 = ((WorldZ2 - VectorOne.z) * (VectorTwo.y - VectorOne.y)) / (VectorTwo.z - VectorOne.z) + VectorOne.y; // Create a temporary translation matrix for calculating the origin offset. D3DXMATRIX TranslationMatrix; D3DXMatrixIdentity(&TranslationMatrix); // Calculate the origin offset. D3DXMatrixTranslation(&TranslationMatrix, WorldX2 - WorldX, WorldY2 - WorldY, 0.0f); // At the offset to the cameras world matrix. this->WorldMatrix = this->WorldMatrix * TranslationMatrix; } Maybe someone has even a better solution than mine.

    Read the article

  • Instead of the specified Texture, black circles on a green background are getting rendered. Why?

    - by vinzBad
    I'm trying to render a Texture via OpenGL. But instead of the texture black circles on a green background are rendered. (They scale, depending what the rotation of the texture is) Example: The texture I'm trying to render is the following: This is the code I use to render the texture, it's located in my Sprite-class. public void Render() { Matrix4 matrix = Matrix4.CreateTranslation(-OriginX, -OriginY, 0) * Matrix4.CreateRotationZ(Rotation) * Matrix4.CreateTranslation(X, Y, 0); Vector2[] corners = { new Vector2(0,0), //top left new Vector2(Width ,0),//top right new Vector2(Width,Height),//bottom rigth new Vector2(0,Height)//bottom left }; //copy the corners to the uv coordinates Vector2[] uv = corners.ToArray<Vector2>(); //transform the coordinates for (int i = 0; i < 4; i++) corners[i] = new Vector2(Vector3.Transform(new Vector3(corners[i]), matrix)); //GL.Color3(TintColor); GL.BindTexture(TextureTarget.Texture2D, _ID); GL.Begin(BeginMode.Quads); { for (int i = 0; i < 4; i++) { GL.TexCoord2(uv[i]); GL.Vertex3(corners[i].X, corners[i].Y, _layerDepth); } } GL.End(); if (EnableDebugDraw) { GL.Color3(Color.Violet); GL.PointSize(3); GL.Begin(BeginMode.Points); { for (int i = 0; i < 4; i++) GL.Vertex2(corners[i]); } GL.End(); GL.Color3(Color.Green); GL.Begin(BeginMode.Points); GL.Vertex2(X, Y); GL.End(); } } This is how I setup OpenGL. public static void SetupGL() { GL.Enable(EnableCap.AlphaTest); GL.AlphaFunc(AlphaFunction.Greater, 0.1f); GL.Enable(EnableCap.Texture2D); GL.Hint(HintTarget.PerspectiveCorrectionHint, HintMode.Nicest); } With this function I load the texture: public static uint LoadTexture(string path) { uint id; GL.GenTextures(1, out id); GL.BindTexture(TextureTarget.Texture2D, id); Bitmap bitmap = new Bitmap(path); BitmapData data = bitmap.LockBits(new System.Drawing.Rectangle(0, 0, bitmap.Width, bitmap.Height), ImageLockMode.ReadOnly, System.Drawing.Imaging.PixelFormat.Format32bppArgb); GL.TexImage2D(TextureTarget.Texture2D, 0, PixelInternalFormat.Rgba, data.Width, data.Height, 0, OpenTK.Graphics.OpenGL.PixelFormat.Bgra, PixelType.UnsignedByte, data.Scan0); bitmap.UnlockBits(data); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMinFilter, (int)TextureMinFilter.Linear); GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMagFilter, (int)TextureMagFilter.Linear); return id; } And here I call Sprite.Render() protected override void OnRenderFrame(FrameEventArgs e) { GL.ClearColor(Color.MidnightBlue); GL.Clear(ClearBufferMask.ColorBufferBit); _sprite.Render(); SwapBuffers(); base.OnRenderFrame(e); } As I stole this code from the Textures-Example from OpenTK, I don't understand why this doesn't work.

    Read the article

  • Android Canvas Coordinate System

    - by Mitch
    I'm trying to find information on how to change the coordinate system for the canvas. I have some vector data I'd like to draw to a canvas using things like circles and lines, but the data's coordinate system doesn't match the canvas coordinate system. Is there a way to map the units I'm using to the screen's units? I'm drawing to an ImageView which isn't taking up the entire display. If I have to do my own calculations prior to each drawing call, how to I find the width and height of my ImageView? The getWidth() and getHeight() calls I tried seem to be returning the entire canvas size and not the size of the ImageView which isn't helpful. I see some matrix stuff, is that something that will work for me? I tried to use the "public void scale(float sx, float sy)", but that works more like a pixel level zoom rather than a vector scale function by expanding each pixel. This means if the dimensions are increased to fit the screen, the line thickness is also increased. Update: After some research I'm starting to think there's no way to change coordinate systems to something else. I'll need to map all my coordinates to the screen's pixel coordinates and do so by modifying each vector. The getWidth() and getHeight() seem to be working better for me now. I can say what was wrong, but I suspect I can't use these methods inside the constructor.

    Read the article

  • SVG animation along path with Raphael

    - by Toby Hede
    I have a rather interesting issue with SVG animation. I am animating along a circular path using Raphael obj = canvas.circle(x, y, size); path = canvas.circlePath(x, y, radius); path = canvas.path(path); //generate path from path value string obj.animateAlong(path, rate, false); The circlePath method is one I have created myself to generate the circle path in SVG path notation: Raphael.fn.circlePath = function(x , y, r) { var s = "M" + x + "," + (y-r) + "A"+r+","+r+",0,1,1,"+(x-0.1)+","+(y-r)+" z"; return s; } So far, so good. This all works. I have my object (obj) animating along the circular path. BUT: The animation only works if I create the object at the same X, Y coords as the path itself. If I start the animation from any other coordinates (say, half-way along the path) the object animates in a circle of the correct radius, however it starts the animation from the object X,Y coordinates, rather than along the path as it is displayed visually. Ideally I would like to be able to stop/start the animation - the same problem occurs on restart. When I stop then restart the animation, it animates in a circle starting from the stopped X,Y.

    Read the article

  • Getting "<kml:..." everywhere, updating a Kml file

    - by Rafe Lavelle
    I'm reading in a Kml file, changing the placemarks' names, and saving it again. var KmlFile = XDocument.Load("C:\\Inetpub\\wwwroot\\GeotagService\\Kml\\Photographs.kml"); XNamespace KmlNamespace = "http://www.opengis.net/kml/2.2"; // find the Placemarks in the Photos folder IEnumerable<XElement> Placemarks = KmlFile.Element(KmlNamespace + "kml").Element(KmlNamespace + "Document").Element(KmlNamespace + "Folder").Elements(KmlNamespace + "Placemark"); foreach (XElement p in Placemarks){ p.Element(KmlNamespace + "name").Value = "testing"; } KmlFile.Save("C:\\Inetpub\\wwwroot\\GeotagService\\Kml\\Photographs.kml"); When I save it however, every element is prefixed with <kml:, like this: <kml:Folder> <kml:name>Photos</kml:name> <kml:open>1</kml:open> <kml:Placemark> <kml:name>testing</kml:name> <kml:LookAt> <kml:longitude>-10.02717694938161</kml:longitude> <kml:latitude>53.48672543547379</kml:latitude> <kml:altitude>0</kml:altitude> </kml:LookAt> <kml:styleUrl>#msn_ylw-pushpin1</kml:styleUrl> <kml:Point> <kml:coordinates>-10.02867619360582,53.48651240326751,0</kml:coordinates> </kml:Point> </kml:Placemark>... Tomalak's comment on this question about blank xmlns gives me a clue that it might be inconsistencies between the namespaces of the document and the elements, but I can't see how I'm doing that. Anyone know?

    Read the article

  • C++ JSON parser

    - by pollux
    Dear reader, I'm working on a twitter client which uses the twitter streaming json api. Twitter advices JSON as XML version is deprecated. I'm looking for a good JSON parser which can parse the json data below. I'm receiving this JSON which I want to be able to read/parse using a JSON parser. { "in_reply_to_status_id": null, "text": "Home-plate umpire Crawford gets stung http://tinyurl.com/27ujc86", "favorited": false, "coordinates": null, "in_reply_to_user_id": null, "source": "<a href=\"http://apiwiki.twitter.com/\" rel=\"nofollow\">API</a>", "geo": null, "created_at": "Fri Jun 18 15:12:06 +0000 2010", "place": null, "user": { "profile_text_color": "333333", "screen_name": "HostingViral", "time_zone": "Pacific Time (US & Canada)", "url": "http://bit.ly/1Way7P", "profile_link_color": "228235", "profile_background_image_url": "http://s.twimg.com/a/1276654401/images/themes/theme14/bg.gif", "description": "Full time Internet Marketer - Helping other reach their Goals\r\nhttp://wavemarker.com", "statuses_count": 1944, "profile_sidebar_fill_color": "c7b7c7", "profile_background_tile": true, "contributors_enabled": false, "lang": "en", "notifications": null, "created_at": "Wed Dec 30 07:50:52 +0000 2009", "profile_sidebar_border_color": "120412", "following": null, "geo_enabled": false, "followers_count": 2485, "protected": false, "friends_count": 2495, "location": "Working at Home", "name": "Johnathan Thomas", "verified": false, "profile_background_color": "131516", "profile_image_url": "http://a1.twimg.com/profile_images/600114776/nessykalvo421_normal.jpg", "id": 100439873, "utc_offset": -28800, "favourites_count": 0 }, "in_reply_to_screen_name": null, "id": 16477056501, "contributors": null, "truncated": false } *This is the raw string (above it beautified) * {"in_reply_to_status_id":null,"text":"Home-plate umpire Crawford gets stung http://tinyurl.com/27ujc86","favorited":false,"coordinates":null,"in_reply_to_user_id":null,"source":"<a href=\"http://apiwiki.twitter.com/\" rel=\"nofollow\">API</a>","geo":null,"created_at":"Fri Jun 18 15:12:06 +0000 2010","place":null,"user":{"profile_text_color":"333333","screen_name":"HostingViral","time_zone":"Pacific Time (US & Canada)","url":"http://bit.ly/1Way7P","profile_link_color":"228235","profile_background_image_url":"http://s.twimg.com/a/1276654401/images/themes/theme14/bg.gif","description":"Full time Internet Marketer - Helping other reach their Goals\r\nhttp://wavemarker.com","statuses_count":1944,"profile_sidebar_fill_color":"c7b7c7","profile_background_tile":true,"contributors_enabled":false,"lang":"en","notifications":null,"created_at":"Wed Dec 30 07:50:52 +0000 2009","profile_sidebar_border_color":"120412","following":null,"geo_enabled":false,"followers_count":2485,"protected":false,"friends_count":2495,"location":"Working at Home","name":"Johnathan Thomas","verified":false,"profile_background_color":"131516","profile_image_url":"http://a1.twimg.com/profile_images/600114776/nessykalvo421_normal.jpg","id":100439873,"utc_offset":-28800,"favourites_count":0},"in_reply_to_screen_name":null,"id":16477056501,"contributors":null,"truncated":false} I've tried multiple JSON parsers from json.org though I've tried 4 now and can't find one which can parse above json. Kind regards, Pollux

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >