Search Results

Search found 6942 results on 278 pages for 'enabled'.

Page 250/278 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• Linux pptp client stops working after several hours

  - by Aron Rotteveel

  Here's the situation: Setup: 1 Windows Server 2008 machine acting as a Domain Controller and RRAS server 1 CentOS machine in a datacentre located elsewhere PPTP client running on CentOS machine, connected to the DC via When I connect to the DC, everything is working fine. I have set up a static IP for the dialup connection in my RRAS server so that the CentOS machine is automatically assigned the IP 192.168.1.240. Inside the VPN, it is not possible to access this machine on the local IP-address. Perfect. However, after several hours, it simply seems to stop working (IE: I cannot ping to or from this machine on the local network). The strange thing is, however: The DC shows the VPN client as still being connected The CentOS machine shows the network interface as being up There are no entries in my /var/log/messages that indicate a problem Output from ifconfig: ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.240 P-t-P:192.168.1.160 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1396 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:4511 (4.4 KiB) TX bytes:15071 (14.7 KiB) Output from route -n: 192.168.1.160 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ppp0 I have the following in my ip-up.local: route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0 The situation can be easily fixed by issueing a killall pppd and re-connecting. However, I obviously do not want to do this every X-hours or so. I have tried running pppd with both the debug as the kdebug flag but cannot find the cause of this problem. Currently, my ppp0 network interface seems to be running and the last log lines mentioning it are: Feb 19 14:10:40 graviton pppd[10934]: local IP address 192.168.1.240 Feb 19 14:10:40 graviton pppd[10934]: remote IP address 192.168.1.160 Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up started (pid 10952) Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up finished (pid 10952), status = 0x0 Feb 19 14:11:27 graviton pptp[10935]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 190 (expecting 189, lost or reordered) Feb 19 14:11:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:11:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:12:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:13:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:14:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:15:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:16:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:679]: no more Echo Reply/Request packets will be reported. I have enabled the persist option. The network interface is still running, but it is still impossible to send data through the VPN. Any help is appreciated.

  Read the article

• How can I switch an existing set of Subversion repositories to use ActiveDirectory?

  - by jpierson

  I have a set of private Subversion repositories on a Windows Server 2003 box which developers access via SVNServe over the svn:// protocol. Currently we have been using the authz and passwd files for each repository to control access however with the growing number of repositories and developers I'm considering switching to using their credentials from ActiveDirectory. We run in an all Microsoft shop and use IIS instead of Apache on all of our web servers so I would prefer to continue to use SVNServe if possible. Besides it being possible, I'm also concerned about how to migrate our repositories so that the history for the existing users map to the correct ActiveDirectory accounts. Keep in mind also that I'm not the network administrator and I'm not terrible familiar with ActiveDirectory so I'll probably have to go through some other people to get the changes made in ActiveDirectory if necessary. What are my options? UPDATE 1: It appears from the SVN documentation that by using SASL I should be able to get SVNServe to authenticate using ActiveDirectory. To clarify, the answer that I'm looking for is how to go about configuring SVNServe (if possible) to use ActiveDirectory for authentication and then how to modify an existing repository to remap existing svn users to their ActiveDirectory domain login accounts. UPDATE 2: It appears that the SASL support in SVNServe works off of a plugin model and the documentation only shows as an example. Looking at the Cyrus SASL Library it looks like a number of authentication "mechanisms" are supported but I'm not sure which one is to be used for ActiveDirectory support nor can I find any documentation about such matters. UPDATE 3: Ok, well it looks like in order to communication with ActiveDirectory I'm looking to use saslauthd instead of sasldb for the *auxprop_plugin* property. Unfortunately it appears that according to some posts (possibly outdated and inaccurate) saslauthd does not build on Windows and such endeavors are considered a work in progress. UPDATE 4: The lastest post I've found on this topic makes it sound as though the proper binaries () are available through the MIT Kerberos Library but it sounds like the author of this post on Nabble.com is still having issues getting things working. UPDATE 5: It looks like from the TortoiseSVN discussions and also this post on svn.haxx.se that even if saslgssapi.dll or whatever necessary binaries are available and configured on the Windows server that the clients will also need the same customization in order to work with these repositories. If this is true, we will only be able to get ActiveDirectory support from a windows client only if changes are made in these clients such as TortoiseSVN and CollabNet build of the client binaries to support such authentication schemes. Although thats what these posts suggest, this is contradictory from what I originally assumed from other reading in that being SASL compatible should require no changes on the client but instead only that the server be setup to handle the authentication mechanism. After reading a bit more carefully in the document about Cyrus SASL in Subversion section 5 states "1.5+ clients with Cyrus SASL support will be able to authenticate against 1.5+ servers with SASL enabled, provided at least one of the mechanisms supported by the server is also supported by the client." So clearly GSSAPI support (which I understand is required for Active Directory) must be available within the client and the server. I have to say, I'm learning way too much about the internals of how Subversion handles authentication than I ever wanted to and I juts simply want to get an answer about whether I can have Active Directory authentication support when using SVNServe on a Windows server and accessing this from Windows clients. According to the official documentation it seems that this is possible however you can see that the configuration is not trivial if even possible at all.

  Read the article

• Server 2003 R2 doesn't allow logon after a few days of uptime

  - by Bryan

  We have a server 2003 R2 standard (which I'll refer to as SRV01) that's knocking on a bit now, but it still acts as a file, print and SQL server on our company's network. SRV01 hosts user profiles, home directories and pretty much all our business data. Note our AD is currently at 2008 R2 level. This server is due to be upgraded in the next 12 months, but I've no budget to spend on it just yet. A bit of history of this server follows: When SRV01 was first commissioned, it acted as a domain controller (with the same 2003 R2 install it has today), paired with another server that ran Server 2003 R2 SBS. A few years ago, we purchased a pair of dedicated DCs (2008 R2) and at this point we decommissioned the 2003 SBS server, and SRV01 was DCPROMOed out of the AD. Up until very recently, SRV01 used to run Exchange 2003, however we've recently purchased a dedicated server for Exchange 2010 and upgraded (following Microsoft recommended upgrade path). Exchange 2003 was recently uninstalled. - Cleanly to the best of my knowledge. Ever since Exchange was removed from SRV01, I'm finding that after a few days of uptime, when I attempt to logon, pressing CTRL-ALT-DEL just hides the Welcome to Windows Server 2003 banner, and never presents the logon dialog. All I see is a moveable mouse pointer and a blank background. It's a similar story with an admin TS session, the RDP client connects and gives me a blank background, but no logon dialog is presented. The RDP session indefinitely hangs until I give up and close it. The only way I've been able to gain access to the server is to pull the plug on it. Whilst the server does have a battery backed up RAID 5 controller, I'm unhappy about having to do this, so as a temporary measure, I've created a scheduled job to reboot SRV01 each night. Not only do I not like the idea of scheduling a reboot of a server like this, but it is also causing problems for users that leave desktop PCs left logged on overnight. Users complain of 'Delayed Write Failures', and there has also been a number of users that have started to complain about account lockout problems, as well as users not able to connect to shares on SRV01 until they reboot their desktop PCs. I've examined event logs on SRV01 and on the DCs looking for clues as to what the problem is, but there really is nothing untoward being logged. How could I being to investigate this problem when nothing of any relevance is being logged? Is there some additional logging that can be enabled that might give some clues as to what could be causing this problem? Could performance monitor help me out here, and if so, what counters would you consider monitoring? It's worth mentioning that whilst the server is unresponsive via the console and TS, it does still respond to clients connecting to shares without problems for several days, but after about a week I then start to hear users reporting problems accessing shares, but this seems quite sporadic. I've also tried leaving the console logged on (and locked), when I notice I can no longer logon via TS, I can unlock the server console without problem, but it refuses to reboot/shutdown, and subsequent attempts to reboot report that a system shutdown is already in progress and the system then completely hangs. I've tried playing the waiting game for several hours thinking that a timeout might allow the shutdown to continue, but to no avail.

  Read the article

• When searching in Outlook, encountered this error "Instant Search encountered a problem while trying

  - by Imagineer

  Sometime when searching for certain keyword, I get this error "Instant Search encountered a problem while trying to display search results. Modifying your query may resolve this problem." I have enabled Outlook logging to determine what is the error as suggested by someone in other forum. but I haven't had a clue how to decipher it. 2010.05.11 09:38:10 <<<< Logging Started (level is LTF_TRACE) >>>> 2010.05.11 09:38:10 HELPER::Initialize called 2010.05.11 09:38:10 Initializing: Finding a Transport 2010.05.11 09:38:10 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000 2010.05.11 09:38:10 MAPI XP Call: TransportLogon, hr = 0x8004011d 2010.05.11 09:38:10 MAPI XP Call: Shutdown, hr = 0x00000000 2010.05.11 09:38:10 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000 2010.05.11 09:38:10 MAPI Status: (-- -- ---/--- -- ---) 2010.05.11 09:38:10 MAPI XP Call: TransportLogon, hr = 0x00000000 2010.05.11 09:38:10 Initializing: Found a transport, Error code = 0x00000000 2010.05.11 09:38:10 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 4, cUids = 1 2010.05.11 09:38:10 MAPI XP Call: RegisterOptions, hr = 0x00000000, cOptions = 2 2010.05.11 09:38:10 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 09:38:10 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000 2010.05.11 09:38:10 HELPER::Initialize done, Error code = 0x00000000 2010.05.11 09:38:10 HELPER::GetCapabilities called, Error code = 0x00000000 2010.05.11 09:38:10 Microsoft Exchange: Synch operation started (flags = 00000031) 2010.05.11 09:38:10 Microsoft Exchange: StartImport(flags = 00000000, max msg = ffffffff): full items 2010.05.11 09:38:10 Microsoft Exchange: UploadItems: 0 messages to send 2010.05.11 09:38:11 Starting the Spooling Cycle 2010.05.11 09:38:11 MAPI Status: (IN fl ---/OUT -- ---) 2010.05.11 09:38:11 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c 2010.05.11 09:38:11 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 855 2010.05.11 09:38:11 Progress: Receiving message (message 1 out of 856, size unknown) 2010.05.11 09:38:11 Downloading one message 2010.05.11 09:38:11 Transport tightly coupled with store, download is NOOP 2010.05.11 09:38:11 Downloading done, Error code = 0x8004010f 2010.05.11 09:38:11 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 09:38:11 FINISHED MAPI TASK 2010.05.11 09:38:11 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 09:38:11 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 09:38:11 EXECUTING EndSession MAPI TASK 2010.05.11 09:38:11 Starting the Simplified Transfer Cycle 2010.05.11 09:38:11 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 855 2010.05.11 09:38:11 Progress: Receiving message (message 1 out of 856, size unknown) 2010.05.11 09:38:11 Downloading one message 2010.05.11 09:38:11 MAPI Status: (IN -- act/OUT -- ---) 2010.05.11 09:38:11 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 09:38:11 Downloading done, Error code = 0x8004010f 2010.05.11 09:38:11 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 09:38:11 FINISHED MAPI TASK 2010.05.11 09:38:11 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 09:38:11 Microsoft Exchange: Synch operation completed 2010.05.11 10:08:15 Microsoft Exchange: Synch operation started (flags = 00000031) 2010.05.11 10:08:15 Microsoft Exchange: StartImport(flags = 00000000, max msg = ffffffff): full items 2010.05.11 10:08:15 Microsoft Exchange: UploadItems: 0 messages to send 2010.05.11 10:08:16 Starting the Spooling Cycle 2010.05.11 10:08:16 MAPI Status: (IN fl ---/OUT -- ---) 2010.05.11 10:08:16 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c 2010.05.11 10:08:16 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 858 2010.05.11 10:08:16 Progress: Receiving message (message 1 out of 859, size unknown) 2010.05.11 10:08:16 Downloading one message 2010.05.11 10:08:16 Transport tightly coupled with store, download is NOOP 2010.05.11 10:08:16 Downloading done, Error code = 0x8004010f 2010.05.11 10:08:16 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 10:08:16 FINISHED MAPI TASK 2010.05.11 10:08:16 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 10:08:16 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 10:08:16 EXECUTING EndSession MAPI TASK 2010.05.11 10:08:16 Starting the Simplified Transfer Cycle 2010.05.11 10:08:16 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 858 2010.05.11 10:08:16 Progress: Receiving message (message 1 out of 859, size unknown) 2010.05.11 10:08:16 Downloading one message 2010.05.11 10:08:16 MAPI Status: (IN -- act/OUT -- ---) 2010.05.11 10:08:16 MAPI Status: (IN -- ---/OUT -- ---) 2010.05.11 10:08:16 Downloading done, Error code = 0x8004010f 2010.05.11 10:08:16 Finishing the Spooling Cycle, Error code = 0x00000000 2010.05.11 10:08:16 FINISHED MAPI TASK 2010.05.11 10:08:16 Microsoft Exchange: ReportStatus: RSF_COMPLETED, hr = 0x00000000 2010.05.11 10:08:16 Microsoft Exchange: Synch operation completed 2010.05.11 10:09:48 HELPER::Uninitialize called 2010.05.11 10:09:48 MAPI Status: (-- -- ---/--- -- ---) 2010.05.11 10:09:48 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000 2010.05.11 10:09:48 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000 2010.05.11 10:09:48 MAPI XP Call: Shutdown, hr = 0x00000000 2010.05.11 10:09:48 Resource manager terminated I'm running Outlook 2007 SP1 in Citrix environment and should be running in Cache Mode. In my Outlook Tools-Options-Search Option, there is nothing under indexing. Any help is greatly appreciated! Thank you.

  Read the article

• Useful Command-line Commands on Windows

  - by Sung Meister

  The aim for this Wiki is to promote using a command to open up commonly used applications without having to go through many mouse clicks - thus saving time on monitoring and troubleshooting Windows machines. Answer entries need to specify Application name Commands Screenshot (Optional) Shortcut to commands && - Command Chaining %SYSTEMROOT%\System32\rcimlby.exe -LaunchRA - Remote Assistance (Windows XP) appwiz.cpl - Programs and Features (Formerly Known as "Add or Remove Programs") appwiz.cpl @,2 - Turn Windows Features On and Off (Add/Remove Windows Components pane) arp - Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP) at - Schedule tasks either locally or remotely without using Scheduled Tasks bootsect.exe - Updates the master boot code for hard disk partitions to switch between BOOTMGR and NTLDR cacls - Change Access Control List (ACL) permissions on a directory, its subcontents, or files calc - Calculator chkdsk - Check/Fix the disk surface for physical errors or bad sectors cipher - Displays or alters the encryption of directories [files] on NTFS partitions cleanmgr.exe - Disk Cleanup clip - Redirects output of command line tools to the Windows clipboard cls - clear the command line screen cmd /k - Run command with command extensions enabled color - Sets the default console foreground and background colors in console command.com - Default Operating System Shell compmgmt.msc - Computer Management control.exe /name Microsoft.NetworkAndSharingCenter - Network and Sharing Center control keyboard - Keyboard Properties control mouse(or main.cpl) - Mouse Properties control sysdm.cpl,@0,3 - Advanced Tab of the System Properties dialog control userpasswords2 - Opens the classic User Accounts dialog desk.cpl - opens the display properties devmgmt.msc - Device Manager diskmgmt.msc - Disk Management diskpart - Disk management from the command line dsa.msc - Opens active directory users and computers dsquery - Finds any objects in the directory according to criteria dxdiag - DirectX Diagnostic Tool eventvwr - Windows Event Log (Event Viewer) explorer . - Open explorer with the current folder selected. explorer /e, . - Open explorer, with folder tree, with current folder selected. F7 - View command history find - Searches for a text string in a file or files findstr - Find a string in a file firewall.cpl - Opens the Windows Firewall settings fsmgmt.msc - Shared Folders fsutil - Perform tasks related to FAT and NTFS file systems ftp - Transfers files to and from a computer running an FTP server service getmac - Shows the mac address(es) of your network adapter(s) gpedit.msc - Group Policy Editor gpresult - Displays the Resultant Set of Policy (RSoP) information for a target user and computer httpcfg.exe - HTTP Configuration Utility iisreset - To restart IIS InetMgr.exe - Internet Information Services (IIS) Manager 7 InetMgr6.exe - Internet Information Services (IIS) Manager 6 intl.cpl - Regional and Language Options ipconfig - Internet protocol configuration lusrmgr.msc - Local Users and Groups Administrator msconfig - System Configuration notepad - Notepad? ;) mmsys.cpl - Sound/Recording/Playback properties mode - Configure system devices more - Displays one screen of output at a time mrt - Microsoft Windows Malicious Software Removal Tool mstsc.exe - Remote Desktop Connection nbstat - displays protocol statistics and current TCP/IP connections using NBT ncpa.cpl - Network Connections netsh - Display or modify the network configuration of a computer that is currently running netstat - Network Statistics net statistics - Check computer up time net stop - Stops a running service. net use - Connects a computer to or disconnects a computer from a shared resource, or displays information about computer connections odbcad32.exe - ODBC Data Source Administrator pathping - A traceroute that collects detailed packet loss stats perfmon - Opens Reliability and Performance Monitor ping - Determine whether a remote computer is accessible over the network powercfg.cpl - Power management control panel applet quser - Display information about user sessions on a terminal server qwinsta - See disconnected remote desktop sessions reg.exe - Console Registry Tool for Windows regedit - Registry Editor rasdial - Connects to a VPN or a dialup network robocopy - Backup/Restore/Copy large amounts of files reliably rsop.msc - Resultant Set of Policy (shows the combined effect of all group policies active on the current system/login) runas - Run specific tools and programs with different permissions than the user's current logon provides sc - Manage anything you want to do with services. schtasks - Enables an administrator to create, delete, query, change, run and end scheduled tasks on a local or remote system. secpol.msc - Local Security Settings services.msc - Services control panel set - Displays, sets, or removes cmd.exe environment variables. set DIRCMD - Preset dir parameter in cmd.exe start - Starts a separate window to run a specified program or command start. - opens the current directory in the Windows Explorer. shutdown.exe - Shutdown or Reboot a local/remote machine subst.exe - Associates a path with a drive letter, including local drives systeminfo -Displays a comprehensive information about the system taskkill - terminate tasks by process id (PID) or image name tasklist.exe - List Processes on local or a remote machine taskmgr.exe - Task Manager telephon.cpl - Telephone and Modem properties timedate.cpl - Date and Time title - Change the title of the CMD window you have open tracert - Trace route wmic - Windows Management Instrumentation Command-line winver.exe - Find Windows Version wscui.cpl - Windows Security Center wuauclt.exe - Windows Update AutoUpdate Client

  Read the article

• Why is this mod_rewrite RewriteRule directive not working in the .htaccess file?

  - by morgant

  I've got a site that was hosted on a linux el cheapo hosting service that I'm migrating to my Mac OS X 10.5 Leopard Server server running Apache 2.2.8 & PHP 5.2.5 w/rewrite_module enabled and AllowOverride All, but I'm running into an issue with the following lines in the .htaccess file: RewriteEngine On #RewriteRule ^view/([^/\.]+)/?$ /view.php?item=$1 [L] #RewriteRule ^order/([^/\.]+)/?$ /order.php?item=$1 [L] RewriteRule ^category/([^/\.]+)/?$ /category.php?category=$1 [L] As you can see, I've commented out the RewriteRule directives for /view/ and /order/, so I'm only dealing with /category/. When I attempt to load http://domain.tld/category/2/ it runs category.php (I've added debug code to confirm), but $_SERVER['REQUEST_URI'] comes through as /category/2/ and $_GET['category'] comes through as empty. I'm usually fine with troubleshooting .htaccess files and mod_rewrite directives, but this one's got me stumped for some reason. Update: I followed Josh's suggestion and here's the what's dumped to mod_rewrite.log when I try to access http://domain.tld/category/2/: 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (2) init rewrite engine with requested uri /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) applying pattern '.*' to uri '/category/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) pass through /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (2) init rewrite engine with requested uri /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) applying pattern '.*' to uri '/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) pass through /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/13 -> 13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri '13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/13

  Read the article

• collectd does not work

  - by bery

  I have installed collectd-5.0.0 on Fedora12 server and would like to run its service for receiving data from clients. I have enabled network plugin and rddtool plugin as commented: collectd.conf in server: BaseDir "/opt/collectd/var/lib/collectd" LoadPlugin "logfile" LoadPlugin network LoadPlugin rrdtool <Plugin network> Listen "192.168.8.37" "25826" </Plugin> collectd.conf in client: LoadPlugin logfile LoadPlugin cpu LoadPlugin network LoadPlugin memory <Plugin network> Server"192.168.8.37" "25826" </Plugin> collectd.log in server: [2011-08-03 02:36:04] Exiting normally. [2011-08-03 02:36:04] rrdtool plugin: Shutting down the queue thread. [2011-08-03 02:36:04] network plugin: Stopping receive thread. [2011-08-03 02:36:04] network plugin: Stopping dispatch thread. [2011-08-03 02:37:11] Initialization complete, entering read-loop. collectd.log in client: [2011-08-02 17:31:44] Initialization complete, entering read-loop. results thst execute netstat on server: netstat -ulpn | grep 25826 udp 0 0 192.168.8.37:25826 0.0.0.0:* 4744/collectd problem: but there is noting in "/opt/collectd/var/lib/collectd/" on ser yes,I move the port number of "25826" as your propose(But I think this is the default port for coolectd).there is no rdd files recived on server. collectd.log in client collectd [2011-08-03 10:01:36] plugin_read_thread: Handling memory'. [2011-08-03 10:01:36] plugin_read_thread: Handlingcpu'. [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = memory; plugin_instance = ; type = memory; type_instance = used; [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = cpu; plugin_instance = 0; type = cpu; type_instance = user; [2011-08-03 10:01:36] uc_update: uml/memory/memory-used: ds[0] = 280412160.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] uc_update: uml/cpu-0/cpu-user: ds[0] = 0.100008 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = memory; plugin_instance = ; type = memory; type_instance = buffered; [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = cpu; plugin_instance = 0; type = cpu; type_instance = nice; [2011-08-03 10:01:36] uc_update: uml/memory/memory-buffered: ds[0] = 344182784.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] uc_update: uml/cpu-0/cpu-nice: ds[0] = 0.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] network plugin: flush_buffer: send_buffer_fill = 1340 [2011-08-03 10:01:36] network plugin: network_send_buffer: buffer_len = 1340 ... [2011-08-03 10:01:36] plugin_read_thread: Next read of the cpu plugin at 1312380106.429064774. collectd.log in server collectd: [2011-08-03 20:18:08] type = network [2011-08-03 20:18:08] type = rrdtool [2011-08-03 20:18:08] network plugin: sockent_open: node = 192.168.8.37; service = 25826; [2011-08-03 20:18:08] fd = 3; calling bind' [2011-08-03 20:18:08] Done parsing/opt/collectd//share/collectd/types.db' [2011-08-03 20:18:08] interval_g = 10; [2011-08-03 20:18:08] timeout_g = 2; [2011-08-03 20:18:08] hostname_g = localhost.localdomain; [2011-08-03 20:18:08] Initialization complete, entering read-loop. It looks like, data is sending but doesn't be recived. Where is the mistake?

  Read the article

• Cannot ping Localhost so I can't shutdown Tomcat

  - by gav

  Hi, I installed Tomcat 6 using the tar-ball via wget. Startup of the server is fine but on shutdown I get a timeout exception. root@88:/usr/local/tomcat/logs# /usr/local/tomcat/bin/shutdown.sh Using CATALINA_BASE: /usr/local/tomcat Using CATALINA_HOME: /usr/local/tomcat Using CATALINA_TMPDIR: /usr/local/tomcat/temp Using JRE_HOME: /usr Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar 30-Mar-2010 17:33:41 org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) ... I read that this might be because I have a firewall blocking incoming connections on the shutdown port (8005). I have a default Ubuntu 9.04 installation running on a VPS with no rules in my iptables. How can I tell if that port is blocked? How can I check that the server is listening for connections on 8005? Bizarrely pinging localhost or the IP of my server fails from the server itself, whereas pinging the IP of my server from another machine succeeds. -------- EDIT -------- (In reply to Davey) Thanks for all the tips and suggestions! netstat -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:8005 0.0.0.0:* LISTEN 9611/java tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 28505/mysqld tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 9611/java tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN ... So we can see that tomcat is listening, I just don't seem to be able to reach it. root@88:/usr/local/tomcat# telnet localhost 8005 Trying 127.0.0.1... Trying to telnet to the port Hangs indefinitely. I have no rules in my iptables so I don't think it's a firewall thing. root@88:/usr/local/tomcat# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is the contents of /etc/hosts 127.0.0.1 localhost.localdomain localhost # Auto-generated hostname. Please do not remove this comment. 88.198.31.14 88.198.31.14 88 88 But I still can't ping localhost... do I need to check a loopback device is enabled properly or something? (I'm unsure how to do that if you do say yes :)). root@88:/usr/local/tomcat# ping localhost PING localhost (127.0.0.1) 56(84) bytes of data. --- localhost ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 5999ms Trying to find out what the loop back is configured as; root@88:~# ifconfig lo lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) SOLUTION THANKS TO DAVEY I needed to bring up the interface (Not sure why it wasn't running). ifconfig lo up did the trick. root@88:~# ifconfig lo up root@88:~# ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@88:~# ping localhost PING localhost.localdomain (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.025 ms Thanks again, Gav

  Read the article

• Apache not booting, no error messages

  - by EricR

  Apache isn't booting on our production server (all of a sudden) and there are no error messages. Can anyone help me fix this or help me start debugging? init.d fails: /etc/init.d/httpd restart Stopping httpd: [FAILED] Starting httpd: [FAILED] Configtest Syntax OK Apache: Server version: Apache/2.2.3 Server built: Nov 12 2012 08:48:46 Server: CentOS release 5.8 (Final) Booting with debug: /usr/sbin/httpd -e debug -X [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module auth_basic_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module auth_digest_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authn_file_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authn_alias_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authn_anon_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authn_dbm_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authn_default_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authz_host_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authz_user_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authz_owner_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authz_groupfile_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authz_dbm_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authz_default_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module ldap_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module authnz_ldap_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module include_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module log_config_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module logio_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module env_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module ext_filter_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module mime_magic_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module expires_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module deflate_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module headers_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module usertrack_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module setenvif_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module mime_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module dav_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module status_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module autoindex_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module info_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module dav_fs_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module vhost_alias_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module negotiation_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module dir_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module actions_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module speling_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module userdir_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module alias_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module rewrite_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module proxy_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module proxy_balancer_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module proxy_ftp_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module proxy_http_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module proxy_connect_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module cache_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module suexec_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module disk_cache_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module file_cache_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module mem_cache_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module cgi_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module version_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module ssl_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module perl_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module php5_module [Sun Dec 16 20:10:16 2012] [debug] mod_so.c(246): loaded module proxy_ajp_module <At this point it exits> /var/log/httpd/error_log [Sun Dec 16 20:10:16 2012] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Sun Dec 16 20:10:16 2012] [info] Init: Seeding PRNG with 256 bytes of entropy [Sun Dec 16 20:10:16 2012] [info] Init: Generating temporary RSA private keys (512/1024 bits) [Sun Dec 16 20:10:16 2012] [info] Init: Generating temporary DH parameters (512/1024 bits) [Sun Dec 16 20:10:16 2012] [info] Init: Initializing (virtual) servers for SSL

  Read the article

• xen debian: domU can't get out side

  - by iftol

  hi every body. i'm a trainee as a sysAdmin, it is my first expérience with virtualization. i have a server setup debian xen 3 with 2 physical interfaces. eth 0 for local network 10.0.0.1 and eth1 for internet (194.X.X.4). i created 3 VMs (web server, mail server and dabase server) with local ip addresses 172.10.0.x/24. the problem i had first is that domU can't ping dom0. i asked the sysAdmin of our ISP and he sais that he fogot to setup the bridginb. so he ceated a bridge with 172.10.0.1/24 after that i was able to ping the real server (194.X.X.4). but i can't go out side from my VMs, how can i fixe this issue? real or physical server ifconfig eth0 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:10.1.3.12 Bcast:10.1.3.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb4/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:412006 errors:0 dropped:0 overruns:0 frame:0 TX packets:411296 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:31410957 (29.9 MiB) TX bytes:31178370 (29.7 MiB) Interruption:36 Mémoire:d6000000-d6012100 eth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:194.x.x.4 Bcast:194.254.167.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb6/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:25872332 errors:0 dropped:0 overruns:0 frame:0 TX packets:414578 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:2642278343 (2.4 GiB) TX bytes:35436775 (33.7 MiB) lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1308073 errors:0 dropped:0 overruns:0 frame:0 TX packets:1308073 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:109871395 (104.7 MiB) TX bytes:109871395 (104.7 MiB) peth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:31818694 errors:0 dropped:0 overruns:0 frame:0 TX packets:414818 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:5197318822 (4.8 GiB) TX bytes:37904897 (36.1 MiB) Interruption:48 Mémoire:d8000000-d8012100 vif281.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:207 errors:0 dropped:0 overruns:0 frame:0 TX packets:298 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:24629 (24.0 KiB) TX bytes:28404 (27.7 KiB) vif281.1 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:45 errors:0 dropped:47063 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:0 (0.0 B) TX bytes:4449 (4.3 KiB) vif282.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:78 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:5041 (4.9 KiB) TX bytes:714 (714.0 B) xenbr0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet adr:172.10.0.1 Bcast:172.10.0.255 Masque:255.255.255.0 adr inet6: fe80::5c72:c6ff:fe49:7fe/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7180 errors:0 dropped:0 overruns:0 frame:0 TX packets:8615 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:756804 (739.0 KiB) TX bytes:791206 (772.6 KiB) brtcl show bridge name bridge id STP enabled interfaces eth1 8000.0026b984ceb6 no peth1 vif281.1 xenbr0 8000.feffffffffff no vif281.0 vif282.0 network-multi-bridge /etc/xen/scripts/network-virtual start vifnum="0" bridgeip="172.10.0.1/24" brnet="172.10.0.0/24" VM webserver eth0 Link encap:Ethernet HWaddr 00:16:3E:42:33:70 inet addr:172.10.0.2 Bcast:172.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe42:3370/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:126 (126.0 b) TX bytes:2036 (1.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Thank you for your help.

  Read the article

• SQL Server Issue: Could not allocate space for object ... primary filegroup is full

  - by Luke

  Trying to figure out a problem at an office that has SQL Server 2005 installed on Windows SBS Server 2008. Here's the setup: It's an office, and the person who set this all up is nowhere to be found. I'm the best hope they have... One of the programs they use on a workstation gives them an error of "Could not allocate space for object 'Billing' in database "MyDatabase" because primary filegroup is full" when trying to save an entry in their software. I searched around for hours, looking for possible solutions. One was to check for available disk space, and another was to defrag. I checked the hard drives on the server, and there is plenty of space free. I also defragged, which may have helped the problem somewhat. It's hard to say, because it seems like with the nature of the error, if you try over and over you might get it to actually save. My next step was to try to see if autogrowth was enabled on the database. This would seem to be a likely / possible solution, but I can't access the database! If I run the SQL Management Studio, I can log in as my Windows user and view the list of databases. However, if I try to do anything (actually view the database, view the properties, add or edit users), I get errors that I don't have permission. For what it's worth, I also tried runing Management Studio as Administrator, in case that would help. No difference, though. Now, what I'm guessing is going on -- from my limited knowledge of SQL and from reading online -- is that though I'm logged in as a Windows administrator, that account does NOT have SQL access. I do see a list of SQL users, including SA, but I again don't have permission to add one or to change the password on an existing one. And nobody at the office has any idea what the SQL passwords could be. So... here's my thinking thus far: 1 - The "Could not allocate" error likely points to a database that needs to be allowed to autogrow. Especially since I verified there is plenty of free space and the HD has been defragmented. 2 - Enabling autogrow would be very easy to do if I had the proper access within SQL Management Stuido. That leads me to this link: http://blogs.technet.com/b/sqlman/archive/2011/06/14/tips-amp-tricks-you-have-lost-access-to-sql-server-now-what.aspx It sounds like it's a step-by-step guide for giving me the access I need to SQL. I'm guessing that if I followed this guide, I would be able to then log in to the SQL server via Management Studio with the proper permissions, and would be able to enable autogrow (or simply view the status of the existing database), and hopefully solve the "Could not allocate space" problem! So I guess I have a few questions: 1 - Would you guys agree with my "diagnosis"? Think I'm barking up the right tree? 2 - Is there any risk at all in hurting / disabling / wrecking the current SQL database or setup with me going through the guide to regain SQL access? I understand that per the guide, I would have to temporarily shut down SQL, so obviously it wouldn't be accessible during that time. But it wouldn't be worth the risk if there's a chance I could mess anything up... Like I said, the workstations ARE currently accessing the database somehow, but nobody knows with what login info or anything. Basically, it's set up, it works (usually), but if they had to reload the software, nobody would know how. Any feedback would be appreciated!! The problem is such that it's not an emergency for them, but an annoyance. If I could fix it, it would be wonderful. But if not, I think they'll manage, especially as they are going to eventually stop using this software. Thank you so much for your time! Luke

  Read the article

• Windows Server 2003 RDP not listening on IPv6

  - by Ian Boyd

  i have a Windows Server 2003 machine; with IPv6 enabled: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : newland.local IP Address. . . . . . . . . . . . : 192.168.1.244 Subnet Mask . . . . . . . . . . . : 255.255.0.0 IP Address. . . . . . . . . . . . : 2001:470:¦¦¦¦:¦¦¦¦:¦¦¦:¦¦¦¦:¦¦¦¦:¦¦¦¦ IP Address. . . . . . . . . . . . : fe80::224:1dff:fe86:fdf2%4 Default Gateway . . . . . . . . . : 192.168.1.1 fe80::250:bfff:fe91:955f%4 i can connect to IIS server using IPv, remotely and locally, using IPv4 and IPv6: > telnet 127.0.0.1 80 (connects) > telnet 192.168.1.244 80 (connects) > telnet ::1 80 (connects) > telnet fe80::224:1dff:fe86:fdf2 80 (connects) And TCPView shows that the server is listening on port 80: Note: This is useful to establish that Windows Server 2003 does have support for IPv6 services. And i can connect to terminal services, locally and remotely, using IPv4: > telnet 127.0.0.1 3389 (connects) > telnet 192.168.1.244 3389 (connects) But i cannot connect to RDP, locally or remotely, over IPv6: > telnet ::1 3389 (fails to connect) > telnet fe80::224:1dff:fe86:fdf2 3389 (fails to connect) We can see that the system is listening on 3389: Except why won't it listen on port 3389 (ipv6)? Unfortunately it's not the firewall. Aside from the fact that i'm connecting locally (in which case the firewall doesn't apply), the firewall doesn't apply:

  Read the article

• Cannot ping host stale ARP cache?

  - by gkchicago

  I am having a strange issue with a Debian (Lenny/Linux 2.6.26-2-amd64) that has been driving me nuts. On some machines within my network I can ping the host in question just fine, other times I have to manually hard-code the ARP ethernet address for the IP in order to establish connectivity. I've finally worked it down to somehow involving ARP. I just found how to fix it in a way that made it work but I'm looking for help explaining this issue and also I don't trust my fix to be permanent.. My thought process has been the following but I just can't make any sense out of it: Could it be the card? (Intel 82555 rev 4) Could it be because there are two network cards? (Default route is eth0) Could it be because of the network aliases? Lenny? AMD x86_64? Argh.. Thank you for any insight you might have // Ping doesn't go thru [gordon@ubuntu ~]$ ping 192.168.135.101 PING 192.168.135.101 (192.168.135.101) 56(84) bytes of data. --- 192.168.135.101 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3014ms // Here's the ARP Table, sometimes the .151 address is good, sometimes it // also matches the Gateways MAC like .101 is doing right here. [gordon@ubuntu ~]$ cat /proc/net/arp IP address HW type Flags HW address Mask Device 192.168.135.15 0x1 0x2 00:0B:DB:2B:24:89 * eth0 192.168.135.151 0x1 0x2 00:0B:6A:3A:30:A6 * eth0 192.168.135.1 0x1 0x2 00:1A:A2:2D:2A:04 * eth0 192.168.135.101 0x1 0x2 00:1A:A2:2D:2A:04 * eth0 // Drop the bad arp table listing and set it manually based on /sbin/ifconfig [gordon@ubuntu ~]$ sudo arp -d 192.168.135.101 [gordon@ubuntu ~]$ sudo arp -s 192.168.135.101 00:0B:6A:3A:30:A6 // Ping starts going thru..?!? [gordon@ubuntu ~]$ ping 192.168.135.101 PING 192.168.135.101 (192.168.135.101) 56(84) bytes of data. 64 bytes from 192.168.135.101: icmp_seq=1 ttl=64 time=15.8 ms 64 bytes from 192.168.135.101: icmp_seq=2 ttl=64 time=15.9 ms 64 bytes from 192.168.135.101: icmp_seq=3 ttl=64 time=16.0 ms 64 bytes from 192.168.135.101: icmp_seq=4 ttl=64 time=15.9 ms --- 192.168.135.101 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3012ms rtt min/avg/max/mdev = 15.836/15.943/16.064/0.121 ms The following is my network config on this. gordon@db01:~$ /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.151 Bcast:192.168.135.255 Mask:255.255.255.0 inet6 addr: fe80::20b:6aff:fe3a:30a6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15476725 errors:0 dropped:0 overruns:0 frame:0 TX packets:10030036 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18565307359 (17.2 GiB) TX bytes:3412098075 (3.1 GiB) eth0:0 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.150 Bcast:192.168.135.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:1 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.101 Bcast:192.168.135.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr 00:e0:81:2a:6e:d0 inet addr:10.10.62.1 Bcast:10.10.62.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:81ff:fe2a:6ed0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10233315 errors:0 dropped:0 overruns:0 frame:0 TX packets:19400286 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1112500658 (1.0 GiB) TX bytes:27952809020 (26.0 GiB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:387 errors:0 dropped:0 overruns:0 frame:0 TX packets:387 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:41314 (40.3 KiB) TX bytes:41314 (40.3 KiB) gordon@db01:~$ sudo mii-tool -v eth0 eth0: negotiated 100baseTx-FD, link ok product info: Intel 82555 rev 4 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD gordon@db01:~$ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface localnet * 255.255.255.0 U 0 0 0 eth0 10.10.62.0 * 255.255.255.0 U 0 0 0 eth1 default 192.168.135.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• ERROR 2003 (HY000): Can't connect to MySQL server on (111)

  - by JohnMerlino

  I am unable to connect to on my ubuntu installation a remote tcp/ip which contains a mysql installation: viggy@ubuntu:~$ mysql -u user.name -p -h xxx.xxx.xxx.xxx -P 3306 Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.xxx.xxx.xxx' (111) I commented out the line below using vim in /etc/mysql/my.cnf: # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 Then I restarted the server: sudo service mysql restart But still I get the same error. This is the content of my.cnf: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ (Note that I can log into my local mysql install just fine by running mysql (and it will log me in as root) and also note that I can get into mysql in the remote server by logging into via ssh and then invoking mysql), but I am unable to connect to the remote server via my terminal using the host, and I need to do it that way so that I can then use mysql workbench.

  Read the article

• High Load mysql on Debian server

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ?

  Read the article

• How to publish an ASP.NET MVC application to a free host

  - by Lirik

  Hi, I'm using a free web host (0000free) which supports ASP.NET MVC, but it uses Mono. This is the first time I deploy an MVC application, so I'm a little confused as to where I need to deploy it. I have Visual Studio 2010 and I used its Publish Feature (i.e. right click on the project name and click publish) and I tried several things: Publish method: FTP to the root folder. Publish method: FTP to the publich_html folder. Publish method: File System to the root folder. Publish method: File System to the publich_html folder. Publish method: File System to a local directory on my computer and then FTP to root and also tried the public_html folder. I went into the cPanel (control panel) to try and see if ASP.NET has to be added/enabled for my web site, but I didn't see anything there. I can't browse to Index.aspx nor can I redirect to it from index.html (as suggested from other posts on the host forum), right now I have a link from index.html to Index.aspx but it's not working either (see http://www.mydevarmy.com) I've also tried renaming Index.aspx to Default.aspx, but that doesn't work either. The search utility of the forum of the host is somewhat weak, so I use google to search their forum: http://www.google.com/search?q=publish+asp.net+site%3A0000free.com%2Fforum%2F&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a I've been reading Pro ASP.NET MVC Framework and they have a chapter about publishing, but it doesn't provide any specific information with respect to the location of publishing, this is all they say (and it's not very helpful in my case): Where Should I Put My Application? You can deploy your application to any folder on the server. When IIS first installs, it automatically creates a folder for a web site called Default Web Site at c:\Inetpub\wwwroot\, but you shouldn’t feel any obligation to put your application files there. It’s very common to host applications on a different physical drive from the operating system (e.g., in e:\websites\ example.com). It’s entirely up to you, and may be influenced by concerns such as how you plan to back up the server. Here is the exception I get when I try to view my Index.aspx page: Unrecognized attribute 'targetFramework'. (/home/devarmy/public_html/Web.config line 1) Description: HTTP 500. Error processing request. Stack Trace: System.Configuration.ConfigurationErrorsException: Unrecognized attribute 'targetFramework'. (/home/devarmy/public_html/Web.config line 1) at System.Configuration.ConfigurationElement.DeserializeElement (System.Xml.XmlReader reader, Boolean serializeCollectionKey) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSection.DoDeserializeSection (System.Xml.XmlReader reader) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSection.DeserializeSection (System.Xml.XmlReader reader) [0x00000] in <filename unknown>:0 at System.Configuration.Configuration.GetSectionInstance (System.Configuration.SectionInfo config, Boolean createDefaultInstance) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSectionCollection.get_Item (System.String name) [0x00000] in <filename unknown>:0 at System.Configuration.Configuration.GetSection (System.String path) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetSection (System.String sectionName, System.String path, System.Web.HttpContext context) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetSection (System.String sectionName, System.String path) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetWebApplicationSection (System.String sectionName) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.get_CompilationConfig () [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.Build (System.Web.VirtualPath vp) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.GetCompiledType (System.Web.VirtualPath virtualPath) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.GetCompiledType (System.String virtualPath) [0x00000] in <filename unknown>:0 at System.Web.HttpApplicationFactory.InitType (System.Web.HttpContext context) [0x00000] in <filename unknown>:0

  Read the article

• dvd drive I/O error?

  - by bobby

  i get dis error evry time i burn a cd/dvd thru my dvd drive...!! Nero Burning ROM bobby 4C85-200E-4005-0004-0000-7660-0800-35X3-0000-407M-MX37-**** (*) Windows XP 6.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.11.3. Internal Version: 7, 11, 3, (Nero Express) Recorder: Version: UL01 - HA 1 TA 1 - 7.11.3.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: Version: 52PP - HA 1 TA 0 - 7.11.3.0 Adapter driver: HA 1 === Scsi-Device-Map === === CDRom-Device-Map === ATAPI-CD ROM-DRIVE-52MAX F: CdRom0 HL-DT-ST DVDRAM GSA-H12N G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 958MB (981560kB) Free physical memory: 309MB (317024kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.6.2010 CD Image 10:43:02 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:43:02 AM #2 Text 0 File Burncd.cpp, Line 3186 HL-DT-ST DVDRAM GSA-H12N Buffer underrun protection activated 10:43:02 AM #3 Text 0 File Burncd.cpp, Line 3500 Turn on Disc-At-Once, using CD-R/RW media 10:43:02 AM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 318783 ( 70:52.33) 10:43:02 AM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 10:43:02 AM #6 Text 0 File DlgWaitCD.cpp, Line 2988 Recorder: HL-DT-ST DVDRAM G SA-H12N; CDR co de: 00 97 27 18; O SJ entry from: Pla smon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A ( LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 0 0 00 (invalid) 10:43:02 AM #7 Text 0 File DlgWaitCD.cpp, Line 493 Protocol of DlgWaitCD activities: TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318784 blo cks [G: HL-DT-ST DVDRAM GSA-H12N] -------------------------------------------------------------- 10:43:02 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [G: HL-DT-ST DVDRAM GSA-H12N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Se ssion Clo sed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next T rk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 6531768 32, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 318784 | 318784 | 0x00 318784 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:43:02 AM #10 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 10:43:02 AM #11 Text 0 File Burncd.cpp, Line 4286 Caching options: cache CDRom or Network-Yes, small files-Yes ( ON 10:43:03 AM #19 Text 0 File MMC.cpp, Line 18034 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 46 34 22 10:43:03 AM #20 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 83836800 10:43:16 AM #21 Text 0 File Cdrdrv.cpp, Line 1405 10:43:16.806 - G: HL-DT-ST DVDRAM GSA-H12N : Queue again later 10:43:42 AM #22 SPTI -1502 File SCSIPassThrough.cpp, Line 181 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1502) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Nero Report 2 Nero Burning ROM Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 4D 00 00 00 20 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 10 53 29 A1 80 08 03 Buffer x0c7d9a40: Len x10000 0xDC 87 EB 41 6E AC 61 5A 07 B2 DB 78 B5 D4 D9 24 0x8D BC 51 38 46 56 0F EE 16 15 5C 5B E3 B0 10 16 0x14 B1 C3 6E 30 2B C4 78 15 AB D5 92 09 B7 81 23 10:43:42 AM #23 CDR -1502 File Writer.cpp, Line 306 DMA-driver error, CRC error G: HL-DT-ST DVDRAM GSA-H12N 10:43:55 AM #24 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 48x (7,200 KB/s) 10:43:55 AM #25 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:44:01 AM #26 Text 0 File Cdrdrv.cpp, Line 11412 DriveLocker: UnLockVolume completed 10:44:01 AM #27 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon Nero Report 3

  Read the article

• Users suddenly missing write permissions to the root drive c within an active directory domain

  - by Kevin

  I'm managing an active directory single domain environment on some Windows Server 2008, Windows Server 2008 R2 and Windows Server 2012 machines. Since a few weeks I got a strange issue. Some users (not all!) report that they cannot any longer save, copy or write files to the root drive c, whether on their clients (vista, win 7) nor via remote desktop connection on a Windows Server 2008 machine. Even running programs that require direct write permissions to the root drive without administrator permissions fail to do so since then. The affected users have local administrator permissions. The question I'm facing now is: What caused this change of system behavior? Why did this happen? I didn't find out yet. What was the last thing I did before it happened? The last action that was made before it happened was the rollout of a GPO containing network drive mappings for the users depending on their security group membership. All network drives are located on a linux server with samba enabled. We did not change any UAC settings, and they have always been activated. However I can't imagine that rolling out this GPO caused the problem. Has anybody faced an issue like that? Just in case: I know that it is for a specific reason that an user without administrative privileges is prevented from writing to the root drive since windows vista and the implementation of UAC. I don't think that those users should be able to write to drive c, but I try to figure out why this is happening and a few weeks ago this was still working. I also know that a user who is a member of the local administrators group does not execute anything with administrator permissions per default unless he or she executes a program with this permissions. What did I do yet? I checked the permissions of the affected programs, the affected clients/server. Didn't find something special. I checked ALL of our GPOs if there exist any restrictions that could prevent the affected users from writing to the root drive. Did not find any settings. I checked the UAC settings of the affected users and compared those to other users that still can write to the root drive. Everything similar. I googled though the internet and tried to find someone who had a similar problem. Did not find one. Has anybody an idea? Thank you very much. Edit: The GPO that was rolled out does the following (Please excuse if the settings are not named exactly like that, I translated the settings into english): **Windows Settings -- Network Drive Mappings -- Drive N: -- General:** Action: Replace **Properties:** Letter: N Location: \\path-to-drive\drivename Re-Establish connection: deactivated Label as: Name_of_the_Share Use first available Option: deactivated **Windows Settings -- Network Drive Mappings -- Drive N: -- Public: Options:** On error don't process any further elements for this extension: no Run as the logged in user: no remove element if it is not applied anymore: no Only apply once: no **Securitygroup:** Attribute -- Value bool -- AND not -- 0 name -- domain\groupname sid -- sid-of-the-group userContext -- 1 primaryGroup -- 0 localGroup -- 0 **Securitygroup:** Attribute -- Value bool -- OR not -- 0 name -- domain\another-groupname sid -- sid-of-the-group userContext -- 1 primaryGroup -- 0 localGroup -- 0 Edit: The Error-Message of an affected users says the following: Due to an unexpected error you can't copy the file. Error-Code 0x80070522: The client is missing a required permission. The command icacls C: shows the following: NT-AUTORITY\SYSTEM:(OI)(CI)(F) PRE-DEFINED\Administrators:(OI)(CI)(F) computername\username:(OI)(CI)(F) A college just told me that also the primary domain-controller (PDC) changed from Windows Server 2008 to Windows Server 2012. That also may be a reason. Any suggestions?

  Read the article

• Blank black screen with cursor after login -- RHEL5

  - by Sean O.

  I have a RHEL 5 machine here which is a Dell Precision T3500. I'm an Ubuntu guy, but I'm having a heck of a time with this machine. After processing its first security update, we cannot log in via the gdm greeter. A new kernel was installed; then I installed the nVidia drivers for our Quadro NVS 295. I know the X configuration is valid because the gdm greeter does display; however, upon login all we can get is a blank, black screen with a cursor. I thought perhaps our python installation was corrupted but a reinstall via yum has not helped. I have searched & googled extensively for a potential fix for this and can find nothing. Below are outputs from uname, a tail of an error in /var/log/messages, and the Xorg.conf. Can anyone suggest a course of action? [sean@cheetah ~]$ uname -a Linux cheetah.*.* 2.6.18-308.8.1.el5 #1 SMP Fri May 4 16:43:02 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux [sean@cheetah ~]$ sudo tail /var/log/messages Jun 5 15:03:04 cheetah gconfd (sean-4592): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jun 5 15:03:05 cheetah hcid[3855]: Default passkey agent (:1.8, /org/bluez/applet) registered Jun 5 15:03:05 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:03:05 cheetah last message repeated 2 times Jun 5 15:03:06 cheetah gconfd (sean-4592): Resolved address "xml:readwrite:/home/sean/.gconf" to a writable configuration source at position 0 Jun 5 15:03:06 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:07 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:08 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:07:01 cheetah ntpd[4114]: synchronized to 64.16.211.38, stratum 3 Jun 5 15:07:01 cheetah ntpd[4114]: kernel time sync enabled 0001 [sean@cheetah ~]$ cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012 # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• how to make bridge networking with KVM work in Fedora19

  - by netllama

  I'm attempting to get several virtual machines setup on a Fedora-19 host system, with the traditional bridge network devices (br0, br1, etc). I've done this many times before with older versions of Fedora (16, 14, etc), and it just works. However, for reasons that I cannot figure out, the bridge doesn't seem to be working in Fedora19. While I can successfully connect to the outside world (local network + internet) from inside a VM, nothing can communicate with the VM from outside (local network). I'm referring to something as trivial as pinging. From inside the VM, I can ping anything successfully (0% packet loss). However, from outside the VM (on the host, or any other system on the same network), I see 100% packet loss when pinging the IP address of the VM. My first question is simply, does anyone else have this working successfully in F19? And if so, what steps did you need to follow? I'm not using NetworkManager at all, its all the network service. There are no firewalls involved anywhere (iptables & firewall services are currently disabled). Here's the current host configuration: # brctl show bridge name bridge id STP enabled interfaces br0 8000.38eaa792efe5 no em2 vnet1 br1 8000.38eaa792efe6 no em3 br2 8000.38eaa792efe7 no em4 vnet0 virbr0 8000.525400db3ebf yes virbr0-nic # more /etc/sysconfig/network-scripts/ifcfg-em2 TYPE=Ethernet BRIDGE="br0" NAME=em2 DEVICE="em2" UUID=aeaa839e-c89c-4d6e-9daa-79b6a1b919bd ONBOOT=yes HWADDR=38:EA:A7:92:EF:E5 NM_CONTROLLED="no" # more /etc/sysconfig/network-scripts/ifcfg-br0 TYPE=Bridge NM_CONTROLLED="no" BOOTPROTO=dhcp NAME=br0 DEVICE="br0" ONBOOT=yes # ifconfig em2 ;ifconfig br0 em2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 1000 (Ethernet) RX packets 100093 bytes 52354831 (49.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 25321 bytes 15791341 (15.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xf7d00000-f7e00000 br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.31.99.226 netmask 255.255.252.0 broadcast 10.31.99.255 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 0 (Ethernet) RX packets 19619 bytes 1963328 (1.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 11 bytes 1074 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Relevant section from /etc/libvirt/qemu/foo.xml (one of the VMs with this problem): <interface type='bridge'> <mac address='52:54:00:26:22:9d'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> # ps -ef | grep qemu qemu 1491 1 82 13:25 ? 00:42:09 /usr/bin/qemu-system-x86_64 -machine accel=kvm -name cuda-linux64-build5 -S -machine pc-0.13,accel=kvm,usb=off -cpu SandyBridge,+pdpe1gb,+osxsave,+dca,+pcid,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pbe,+tm,+ht,+ss,+acpi,+ds,+vme -m 16384 -smp 6,sockets=6,cores=1,threads=1 -uuid 6e930234-bdfd-044d-2787-22d4bbbe30b1 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/cuda-linux64-build5.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/var/lib/libvirt/images/cuda-linux64-build5.img,if=none,id=drive-virtio-disk0,format=raw,cache=writeback -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -netdev tap,fd=25,id=hostnet0,vhost=on,vhostfd=26 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:26:22:9d,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:1 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 I can provide additional information, if requested. thanks!

  Read the article

• django, mod_wsgi, MySQL High CPU - Problems

  - by Red Rover

  I am having a problem with an OSQA site. It is Django/Apache/mod_wsgi configured site. Every hour, the CPU spikes to 164% (Average) for task HTTPD. After 10 minutes, it frees back up. I have reviewed the logs, cron tables, made many config changes, but cannot track this problem down. Can someone please look at the information below and let me know if it is a configuration problem, or if anyone else has experienced this issue. Running TOP shows HTTPD using 165% of CPU VMware performance monitor also displays spikes. This happens every hour for 10 minutes. I have the following information from server status Server Version: Apache/2.2.15 (Unix) DAV/2 mod_wsgi/3.2 Python/2.6.6 Server Built: Feb 7 2012 09:50:15 Current Time: Sunday, 10-Jun-2012 21:44:29 EDT Restart Time: Sunday, 10-Jun-2012 19:44:51 EDT Parent Server Generation: 0 Server uptime: 1 hour 59 minutes 37 seconds Total accesses: 1088 - Total Traffic: 11.5 MB CPU Usage: u80.26 s243.8 cu0 cs0 - 4.52% CPU load .152 requests/sec - 1682 B/second - 10.8 kB/request 4 requests currently being processed, 11 idle workers ....._..........__......W....................................... ...................................C._..._....._L__._L_._....... ...................... Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process Srv PID Acc M CPU SS Req Conn Child Slot Client VHost Request 0-0 - 0/0/34 . 0.42 327 17 0.0 0.00 0.67 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 1-0 - 0/0/22 . 0.31 339 32 0.0 0.00 0.26 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 2-0 - 0/0/22 . 0.65 358 10 0.0 0.00 0.31 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 3-0 - 0/0/31 . 1.03 378 31 0.0 0.00 0.60 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 4-0 - 0/0/20 . 0.45 356 9 0.0 0.00 0.31 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 5-0 18852 0/16/34 _ 0.98 27 18120 0.0 0.37 0.62 69.180.250.36 osqa.informs.org GET /questions/289/what-is-the-difference-between-operations-re 6-0 - 0/0/32 . 0.94 309 29 0.0 0.00 0.64 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 7-0 - 0/0/31 . 1.15 382 32 0.0 0.00 0.75 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 8-0 - 0/0/21 . 0.28 403 19 0.0 0.00 0.20 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 9-0 - 0/0/32 . 1.37 288 16 0.0 0.00 0.60 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 10-0 - 0/0/33 . 1.72 383 16 0.0 0.00 0.40 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 I am running Django 1.3 This is a mod_wsgi configuration and copied is the wsgi.conf file: <IfModule !python_module> <IfModule !wsgi_module> LoadModule wsgi_module modules/mod_wsgi.so <IfModule wsgi_module> <Directory /var/www/osqa> Order allow,deny Allow from all #Deny from all </Directory> WSGISocketPrefix /var/run/wsgi WSGIPythonEggs /var/tmp WSGIDaemonProcess OSQA maximum-requests=10000 WSGIProcessGroup OSQA Alias /admin_media/ /usr/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/contrib/admin/media/ Alias /m/ /var/www/osqa/forum/skins/ Alias /upfiles/ /var/www/osqa/forum/upfiles/ <Directory /var/www/osqa/forum/skins> Order allow,deny Allow from all </Directory> WSGIScriptAlias / /var/www/osqa/osqa.wsgi </IfModule> </IfModule> </IfModule> This is the httpd.conf file Timeout 120 KeepAlive Off MaxKeepAliveRequests 100 MaxKeepAliveRequests 400 KeepAliveTimeout 3 <IfModule prefork.c> Startservers 15 MinSpareServers 10 MaxSpareServers 20 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 0 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> We are using MySQL The server is an ESX4i, configured for the VM to use 4 CPUs and 8 GB Ram. Hyper threading is enabled, 2 physical CPU's, with 4 Logical. the CPU are Intel Xeon 2.8 GHz. Total memory is 12GB

  Read the article

• How do I get my ubuntu server to listen for database connections?

  - by Bob Flemming

  I am having a problems connecting to my database outside of phpmyadmin. Im pretty sure this is because my server isn't listening on port 3306. When I type: sudo netstat -ntlp on my OTHER working server I can see the following line: tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 20445/mysqld However, this line does not appear on the server I am having difficulty with. How do I make my sever listen for mysql connections? Here my my.conf file: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql #skip-networking=off #skip_networking=off #skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 0.0.0.0 # # * Fine Tuning # key_buffer = 64M max_allowed_packet = 64M thread_stack = 650K thread_cache_size = 32 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 2M query_cache_size = 32M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

  Read the article

• Nginx error page with JSON response

  - by Waseem

  I'm trying to serve a maintenance page to clients making request to my application when it is under maintenance. Following is my nginx configuration for that purpose. server { recursive_error_pages on; listen 80; ... if (-f $document_root/maintenance.html) { return 503; } error_page 404 /404.html; error_page 500 502 504 /500.html; error_page 503 @503; location = /404.html { root $document_root; } location = /500.html { root $document_root; } location @503 { error_page 405 =/maintenance.html; if (-f $request_filename) { break; } rewrite ^(.*)$ /maintenance.html break; } } Lets say I have enabled maintenance of my site by creating a $document_root/maintenance.html. This file, correctly, is served when a user makes a request with with Accept header of text/html. $ curl http://server.com/ -i -v -X GET -H "Accept: text/html" * Adding handle: conn: 0xf89420 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0xf89420) send_pipe: 1, recv_pipe: 0 * About to connect() to server.com port 80 (#0) * Trying xxx.xxx.xxx.xxx... * Connected to server.com (xxx.xxx.xxx.xxx) port 80 (#0) > GET / HTTP/1.1 > User-Agent: curl/7.33.0 > Host: server.com > Accept: text/html > < HTTP/1.1 503 Service Temporarily Unavailable HTTP/1.1 503 Service Temporarily Unavailable * Server nginx/1.1.19 is not blacklisted < Server: nginx/1.1.19 Server: nginx/1.1.19 < Date: Thu, 14 Nov 2013 11:16:16 GMT Date: Thu, 14 Nov 2013 11:16:16 GMT < Content-Type: text/html Content-Type: text/html < Content-Length: 27 Content-Length: 27 < Connection: keep-alive Connection: keep-alive < This is under maintenance. * Connection #0 to host server.com left intact Now some clients set Accept header to application/json. How do I send them a JSON response instead of maintenance.html? Following is the response that I get when setting Accept to application/json. $ curl http://server.com/ -i -v -X GET -H "Accept: application/json" * Adding handle: conn: 0x190c430 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x190c430) send_pipe: 1, recv_pipe: 0 * About to connect() to server.com port 80 (#0) * Trying xxx.xxx.xxx.xxx... * Connected to server.com (xxx.xxx.xxx.xxx) port 80 (#0) > GET / HTTP/1.1 > User-Agent: curl/7.33.0 > Host: server.com > Accept: application/json > < HTTP/1.1 503 Service Temporarily Unavailable HTTP/1.1 503 Service Temporarily Unavailable * Server nginx/1.1.19 is not blacklisted < Server: nginx/1.1.19 Server: nginx/1.1.19 < Date: Thu, 14 Nov 2013 11:15:50 GMT Date: Thu, 14 Nov 2013 11:15:50 GMT < Content-Type: text/html Content-Type: text/html < Content-Length: 27 Content-Length: 27 < Connection: keep-alive Connection: keep-alive < This is under maintenance. * Connection #0 to host server.com left intact

  Read the article

• Making sense of S.M.A.R.T

  - by James

  First of all, I think everyone knows that hard drives fail a lot more than the manufacturers would like to admit. Google did a study that indicates that certain raw data attributes that the S.M.A.R.T status of hard drives reports can have a strong correlation with the future failure of the drive. We find, for example, that after their first scan error, drives are 39 times more likely to fail within 60 days than drives with no such errors. First errors in re- allocations, offline reallocations, and probational counts are also strongly correlated to higher failure probabil- ities. Despite those strong correlations, we find that failure prediction models based on SMART parameters alone are likely to be severely limited in their prediction accuracy, given that a large fraction of our failed drives have shown no SMART error signals whatsoever. Seagate seems like it is trying to obscure this information about their drives by claiming that only their software can accurately determine the accurate status of their drive and by the way their software will not tell you the raw data values for the S.M.A.R.T attributes. Western digital has made no such claim to my knowledge but their status reporting tool does not appear to report raw data values either. I've been using HDtune and smartctl from smartmontools in order to gather the raw data values for each attribute. I've found that indeed... I am comparing apples to oranges when it comes to certain attributes. I've found for example that most Seagate drives will report that they have many millions of read errors while western digital 99% of the time shows 0 for read errors. I've also found that Seagate will report many millions of seek errors while Western Digital always seems to report 0. Now for my question. How do I normalize this data? Is Seagate producing millions of errors while Western digital is producing none? Wikipedia's article on S.M.A.R.T status says that manufacturers have different ways of reporting this data. Here is my hypothesis: I think I found a way to normalize (is that the right term?) the data. Seagate drives have an additional attribute that Western Digital drives do not have (Hardware ECC Recovered). When you subtract the Read error count from the ECC Recovered count, you'll probably end up with 0. This seems to be equivalent to Western Digitals reported "Read Error" count. This means that Western Digital only reports read errors that it cannot correct while Seagate counts up all read errors and tells you how many of those it was able to fix. I had a Seagate drive where the ECC Recovered count was less than the Read error count and I noticed that many of my files were becoming corrupt. This is how I came up with my hypothesis. The millions of seek errors that Seagate produces are still a mystery to me. Please confirm or correct my hypothesis if you have additional information. Here is the smart status of my western digital drive just so you can see what I'm talking about: james@ubuntu:~$ sudo smartctl -a /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1001FALS-00E3A0 Serial Number: WD-WCATR0258512 Firmware Version: 05.01D05 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 10 19:52:28 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 179 175 021 Pre-fail Always - 4033 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 270 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1468 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 262 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 223 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 42 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

  Read the article

• Cannot read status the monit daemon, even with allowed group

  - by jefflunt

  I cannot seem to get monit status or other CLI commands to work. I've built monit v5.8 to run on a Raspberry Pi. I'm able to add services to be monitored, and the web interface can be accessed just fine, as I've set it up for public read-only access (it's a test server, not my final production setup, so not a big deal right now). Problem is, when I run monit status while logged in as root I get: # monit status monit: cannot read status from the monit daemon I also have monit started on boot via this /etc/inittab file entry: mo:2345:respawn:/usr/local/bin/monit -Ic /etc/monitrc I've verified that monit is running, and I'm getting email alerts anytime I either kill the monit process manually, or reboot my raspberry pi. So, next I check my monitrc file permissions to see which group is allowed access. # ls -al /etc/monitrc -rw------- 1 root root 2359 Aug 24 14:48 /etc/monitrc Here's my relevant allow section of the control file. set httpd port 80 allow [omitted] readonly allow @root allow localhost allow 0.0.0.0/0.0.0.0 Also tried setting permissions on this file to 640 to allow group read permissions, but no matter what I try I either get the same error as noted above, or when the permissions are set to 640 I get: # monit status monit: The control file '/etc/monitrc' must have permissions no more than -rwx------ (0700); right now permissions are -rw-r----- (0640). What am I missing here? I know that the httpd must be enabled, as that's the interface that the CLI uses to get information (or so I've read), so I've done that. And in terms of monit doing its monitoring job and sending email alerts, that's all working as well. Here's my entire monitrc file - again, this is version v5.8, and it was build with both PAM and SSL support. The process runs under the root user: # Global settings set daemon 300 with start delay 5 set logfile /var/log/monit.log set pidfile /var/run/monit.pid set idfile /var/run/.monit.id set statefile /var/run/.monit.state # Mail alerts ## Set the list of mail servers for alert delivery. Multiple servers may be ## specified using a comma separator. If the first mail server fails, Monit # will use the second mail server in the list and so on. By default Monit uses # port 25 - it is possible to override this with the PORT option. # set mailserver smtp.gmail.com port 587 username [omitted] password [omitted] using tlsv1 ## Send status and events to M/Monit (for more informations about M/Monit ## see http://mmonit.com/). By default Monit registers credentials with ## M/Monit so M/Monit can smoothly communicate back to Monit and you don't ## have to register Monit credentials manually in M/Monit. It is possible to ## disable credential registration using the commented out option below. ## Though, if safety is a concern we recommend instead using https when ## communicating with M/Monit and send credentials encrypted. # # set mmonit http://monit:[email protected]:8080/collector # # and register without credentials # Don't register credentials # # ## Monit by default uses the following format for alerts if the the mail-format ## statement is missing:: set mail-format { from: [email protected] subject: $SERVICE $DESCRIPTION message: $EVENT Service: $SERVICE Date: $DATE Action: $ACTION Host: $HOST Description: $DESCRIPTION Monit instance provided by chicagomeshnet.com } # Web status page set httpd port 80 allow [omitted] readonly allow @root allow localhost allow 0.0.0.0/0.0.0.0 ## You can set alert recipients whom will receive alerts if/when a ## service defined in this file has errors. Alerts may be restricted on ## events by using a filter as in the second example below.

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >