Search Results

Search found 8495 results on 340 pages for 'high availability'.

Page 251/340 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

• Brightness Crash and Fan issues in 12.04.1

  - by S.A. McIntosh

  I would just like to state beforehand that I am a total novice in using Ubuntu when it comes to the more complex issues. So I thought it would be best to finally come here and ask for help before being re-directed or closed out for a solution. I have already looked high and low on this board for one but nothing came up for my particular case, so I might as well take a shot asking for the first time here. This is what I have at the moment: -Dell Insprion 1764 w/ 64-bit Intel i5 Core -Dual Boot: Windows 7/Ubuntu 12.04.1 32-bit (from 12.04 install) -Unity shell -Linux kernel: 3.2.0-32 generic-pae ...and this is my fglrxinfo: OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 5000 Series OpenGL version string: 4.2.11627 Compatibility Profile Context The one issue I have with using Ubuntu is brightness. With the driver in every time I use the slider in the brightness and lock settings or use the keyboard function, it freezes, goes black and comes up with a scrambled colors page like this in the video. So I have looked all over this board and the web for answers looking for a solution that might have an answer. This is what I have done so far to fix this: -First Solution: Looking around, I found this small fix using terminal: sudo gedit /etc/rc.local followed by adding this into "rc.local" echo # > /sys/class/backlight/acpi_video0/brightness This works rarely with the graphics driver still in and I often get lucky say during restart but reboot would only snap back the brightness at max. -Second Solution Simply remove the graphics driver while leaving the solution of first behind. This solves the issue but results in having the monitor flicker and flash at startup which in itself is not a problem to me but maybe not so good for monitor health. Also it causes the fan to speed up throughout the session and render any program that needs the driver useless. -Third Solution This is the most obvious. Just simply use the brightness on AMD Catalyst Control Center software that came with the driver, and I can say that it's form of brightness is HORRIBLE compared to the actual settings. Which leads up to where I am now, back to the driver to stop the fan speed-up and seems that the only solution to the brightness crash is to use the keyboard-controlled brightness at the login screen NOT the desktop if I want the issued effect but will just snap at max bright again if I restart. Fan speed problem is dealt with but now run the risk of crashing my computer if I so much touch the brightness settings. Speaking of which I found this on launchpad and it seems that the issue has been going far since June of 2012. Any help, redirect link or reference would be greatly appreciated. Thank you.

  Read the article

• Bay Area Coherence Special Interest Group Next Meeting July 21, 2011

  - by csoto

  Date: Thursday, July 21, 2011 Time: 4:30pm - 8:15pm ET (note that Parking at 475 Sansome Closes at 8:30pm) Where: Oracle Office, 475 Sansome Street, San Francisco, CA Google Map We will be providing snacks and beverages. Register! - Registration is required for building security. Presentation Line Up:? 5:10pm - Batch Processing Using Coherence in Oracle Group Policy Administration - Paul Cleary, Oracle Oracle Insurance Policy Administration (OIPA) is a flexible, rules-based policy administration solution that provides full record keeping for all policy lifecycle transactions. One component of OIPA is Cycle processing, which is the batch processing of pending insurance transactions. This presentation introduces OIPA and Cycle processing, describing the unique challenges of processing a high volume of transactions within strict time windows. It then reviews how OIPA uses Oracle Coherence and the Processing Pattern to meet these challenges, describing implementation specifics that highlight the simplicity and robustness of the Processing Pattern. 6:10pm - Secure, Optimize, and Load Balance Coherence with F5 - Chris Akker, F5 F5 Networks, Inc., the global leader in Application Delivery Networking, helps the world’s largest enterprises and service providers realize the full value of virtualization, cloud computing, and on-demand IT. Recently, F5 and Oracle partnered to deliver a novel solution that integrates Oracle Coherence 3.7 with F5 BIG-IP Local Traffic Manager (LTM). This session will introduce F5 and how you can leverage BIG-IP LTM to secure, optimize, and load balance application traffic generated from Coherence*Extend clients across any number of servers in a cluster and to hardware-accelerate CPU-intensive SSL encryption. 7:10pm - Using Oracle Coherence to Enable Database Partitioning and DC Level Fault Tolerance - Alexei Ragozin, Independent Consultant and Brian Oliver, Oracle Partitioning is a very powerful technique for scaling database centric applications. One tricky part of partitioned architecture is routing of requests to the right database. The routing layer (routing table) should know the right database instance for each attribute which may be used for routing (e.g. account id, login, email, etc): it should be fast, it should fault tolerant and it should scale. All the above makes Oracle Coherence a natural choice for implementing such routing tables in partitioned architectures. This presentation will cover synchronization of the grid with multiple databases, conflict resolution, cross cluster replication and other aspects related to implementing robust partitioned architecture. Additional Info:?? - Download Past Presentations: The presentations from the previous meetings of the BACSIG are available for download here. Click on the presentation titles to download the PDF files. - Join the Coherence online community on our Oracle Coherence Users Group on LinkedIn. - Contact BACSIG with any comments, questions, presentation proposals and content suggestions.

  Read the article

• June IOUG events

  - by Mandy Ho

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Independent Oracle User Group (IOUG) Regional Events: June 11-12, 2012 – Broomfield, CO 2-Day Seminar- “ High Performance PL/SQL & Oracle Database 11g New Features” Steven Feuerstein, generally considered the world’s leading PL/SQL expert, will be presenting his all-new, 2-day, “Higher Performance PL/SQL and Oracle 11g PL/SQL New Features” seminar on June 11 & 12 at Level 3 Communications in Broomfield, Colorado.  This will be Steven’s first Denver seminar in almost 4  years.  Who knows when he will offer another? http://www.rmoug.org/ June 14, 2012 – Ottawa, Ontario Pythian’s Gwen Shapira puts on 3 great presentations focused on NoSQL, making OLTP run fast and Big Data. http://www.oug-ottawa.org/pls/htmldb/f?p=327:27:1317735724699447::NO June 21, 2012 – Calgary, Alberta Big Data and Extreme Analytics Summit http://coug.ab.ca/ June 22, 2012 – Westborough, MA 10 Things You Probably Did Not Know? With Tom Kyte PL/SQL turns 23 years old this year. It was first introduced in 1988 with Oracle6 Database. This session looks at five technical things about PL/SQL you probably did not know: under-the-covers features that make PL/SQL quite simply the most efficient language with which to process data in the database. http://noug.com/  June 28/29, 2012 – Plano, Texas Jonathan Lewis Oracle Performance Seminars The DOUG (DALLAS ORACLE USERS GROUP) has invited SpeakTech to return to Dallas, and they’re bringing Jonathan Lewis! Topics are Beating the Oracle Optimizer – June 28, 2012, Trouble Shooting & Tuning – June 29, 2012 http://www.eventbrite.com/event/3082448687

  Read the article

• Devoxx 2011: Java EE 6 Hands-on Lab Delivered

  - by arungupta

  I, along with Alexis's help, delivered a Java EE 6 hands-on lab to a packed room of about 40+ attendees at Devoxx 2011. The lab was derived from the OTN Developer Days 2012 version but added lot more content to showcase several Java EE 6 technologies. The problem statement from the lab document states: This hands-on lab builds a typical 3-tier Java EE 6 Web application that retrieves customer information from a database and displays it in a Web page. The application also allows new customers to be added to the database as well. The string-based and type-safe queries are used to query and add rows to the database. Each row in the database table is published as a RESTful resource and is then accessed programmatically. Typical design patterns required by a Web application like validation, caching, observer, partial page rendering, and cross-cutting concerns like logging are explained and implemented using different Java EE 6 technologies. The lab covered Java Persistence API 2, Servlet 3, Enterprise JavaBeans 3.1, JavaServer Faces 2, Java API for RESTful Web Services 1.1, Contexts and Dependency Injection 1.0, and Bean Validation 1.0 over 47 pages of detailed self-paced instructions. Here is the complete Table of Contents: The lab can be downloaded from here and requires only NetBeans IDE "All" or "Java EE" version, which includes GlassFish anyway. All the feedback received from the lab has been incorporated in the instructions and bugs filed (Updated 49559, 205232, 205248, 205256). 80% of the attendees could easily complete the lab and some even completed in much less than 3 hours. That indicates that either more content needs to be added to the lab or the intellectual level of the attendees at the conference was pretty high. I think the lab has enough content for 3 hours but we moved at a much more faster pace so I conclude on the latter. Truly a joy to conduct a lab to 40 Devoxxians! Another related lab that might be handy for folks is "Develop, Deploy, and Monitor your Java EE 6 applications using GlassFish 3.1 Cluster". It explains how: Create a 2-instance GlassFish cluster Front-end with a Web server and a load balancer Demonstrate session replication and fail over Monitor the application using JavaScript The complete lab instructions and source code are available and you can try them. I plan to continue evolving the contents for the Java EE 6 hands-on lab to cover more technologies and features and will announce them on this blog. Let me know on what else would you like to see in the future versions.

  Read the article

• Devoxx 2011: Java EE 6 Hands-on Lab Delivered

  - by arungupta

  I, along with Alexis's help, delivered a Java EE 6 hands-on lab to a packed room of about 40+ attendees at Devoxx 2011. The lab was derived from the OTN Developer Days 2012 version but added lot more content to showcase several Java EE 6 technologies. The problem statement from the lab document states: This hands-on lab builds a typical 3-tier Java EE 6 Web application that retrieves customer information from a database and displays it in a Web page. The application also allows new customers to be added to the database as well. The string-based and type-safe queries are used to query and add rows to the database. Each row in the database table is published as a RESTful resource and is then accessed programmatically. Typical design patterns required by a Web application like validation, caching, observer, partial page rendering, and cross-cutting concerns like logging are explained and implemented using different Java EE 6 technologies. The lab covered Java Persistence API 2, Servlet 3, Enterprise JavaBeans 3.1, JavaServer Faces 2, Java API for RESTful Web Services 1.1, Contexts and Dependency Injection 1.0, and Bean Validation 1.0 over 47 pages of detailed self-paced instructions. Here is the complete Table of Contents: The lab can be downloaded from here and requires only NetBeans IDE "All" or "Java EE" version, which includes GlassFish anyway. All the feedback received from the lab has been incorporated in the instructions and bugs filed (Updated 49559, 205232, 205248, 205256). 80% of the attendees could easily complete the lab and some even completed in much less than 3 hours. That indicates that either more content needs to be added to the lab or the intellectual level of the attendees at the conference was pretty high. I think the lab has enough content for 3 hours but we moved at a much more faster pace so I conclude on the latter. Truly a joy to conduct a lab to 40 Devoxxians! Another related lab that might be handy for folks is "Develop, Deploy, and Monitor your Java EE 6 applications using GlassFish 3.1 Cluster". It explains how: Create a 2-instance GlassFish cluster Front-end with a Web server and a load balancer Demonstrate session replication and fail over Monitor the application using JavaScript The complete lab instructions and source code are available and you can try them. I plan to continue evolving the contents for the Java EE 6 hands-on lab to cover more technologies and features and will announce them on this blog. Let me know on what else would you like to see in the future versions.

  Read the article

• Does Your Customer Engagement Create an Ah Feeling?

  - by Richard Lefebvre

  An (Oracle CX Blog) article by Christina McKeon Companies that successfully engage customers all have one thing in common. They make it seem easy for the customer to get what they need. No one would argue that brands don’t want to leave customers with this “ah” feeling. Since 94% of customers who have a low-effort service experience will buy from that company again, it makes financial sense for brands.1 Some brands are thinking differently about how they engage their customers to create ah feelings. How do they do it? Toyota is a great example of using smart assistance technology to understand customer intent and answer questions before customers hit the submit button online. What is unique in this situation is that Toyota captures intent while customers are filling out email forms. Toyota analyzes the data in the form and suggests responses before the customer sends the email. The customer gets the right answer, and the email never makes it to your contact center — which makes you and the customer happy. Most brands are fully aware of chat as a service channel, but some brands take chat to a whole new level. Beauty.com, part of the drugstore.com and Walgreens family of brands, uses live chat to replicate the personal experience that one would find at high-end department store cosmetic counters. Trained beauty advisors, all with esthetician or beauty counter experience, engage in live chat sessions with online shoppers to share immediate advice on the best products for their personal needs. Agents can watch customer activity online and determine the right time to reach out and offer help, just as help would be offered in a brick-and-mortar store. And, agents can co-browse along with the customer helping customers with online check-out. These personal chat discussions also give Beauty.com the opportunity to present products, advertise promotions, and resolve customer issues when they arise. Beauty.com converts approximately 25% of chat sessions into product orders. Photobox, the European market leader in online photo services, wanted to deliver personal and responsive service to its 24 million members. It ensures customer inquiries on personalized photo products are routed based on agent knowledge so customers get what they need from the company experts. By using a queuing system to ensure that the agent with the most appropriate knowledge handles the query, agent productivity increased while response times to 1,500 customer queries per day decreased. A real-time dashboard prevents agents from being overloaded with queries. This approach has produced financial results with a 15% increase in sales to existing customers and a 45% increase in orders from newly referred customers.

  Read the article

• Unit testing in Django

  - by acjohnson55

  I'm really struggling to write effective unit tests for a large Django project. I have reasonably good test coverage, but I've come to realize that the tests I've been writing are definitely integration/acceptance tests, not unit tests at all, and I have critical portions of my application that are not being tested effectively. I want to fix this ASAP. Here's my problem. My schema is deeply relational, and heavily time-oriented, giving my model object high internal coupling and lots of state. Many of my model methods query based on time intervals, and I've got a lot of auto_now_add going on in timestamped fields. So take a method that looks like this for example: def summary(self, startTime=None, endTime=None): # ... logic to assign a proper start and end time # if none was provided, probably using datetime.now() objects = self.related_model_set.manager_method.filter(...) return sum(object.key_method(startTime, endTime) for object in objects) How does one approach testing something like this? Here's where I am so far. It occurs to me that the unit testing objective should be given some mocked behavior by key_method on its arguments, is summary correctly filtering/aggregating to produce a correct result? Mocking datetime.now() is straightforward enough, but how can I mock out the rest of the behavior? I could use fixtures, but I've heard pros and cons of using fixtures for building my data (poor maintainability being a con that hits home for me). I could also setup my data through the ORM, but that can be limiting, because then I have to create related objects as well. And the ORM doesn't let you mess with auto_now_add fields manually. Mocking the ORM is another option, but not only is it tricky to mock deeply nested ORM methods, but the logic in the ORM code gets mocked out of the test, and mocking seems to make the test really dependent on the internals and dependencies of the function-under-test. The toughest nuts to crack seem to be the functions like this, that sit on a few layers of models and lower-level functions and are very dependent on the time, even though these functions may not be super complicated. My overall problem is that no matter how I seem to slice it, my tests are looking way more complex than the functions they are testing.

  Read the article

• ArchBeat Link-o-Rama for November 8, 2012

  - by Bob Rhubart

  Webcast: Meeting Customer Expectations in the New Age of Retail Keep your eye on this live webcast as Sanjeev Sharma (Principal Product Director, Oracle Exalogic), Kelly Goetsch (Senior Principal Product Manager, Oracle Commerce), and Dan Conway (Senior Product Manager, Oracle Retail) offer real-world examples of business value derived by running customer-facing applications on Oracle Engineered Systems. Live, Thursday Nov 8, 10am PT/ 1pm ET. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." — Irving Wladawsky-Berger SOA Still Not Dead: Ratification of Governance Standard Highlights SOA’s Continued Relevance So just about the time I dig into Google Trends to learn that the conversation about governance peaked in 2004, along comes all this InfoQ article by Richard Seroter. And of course you've already listened to the OTN Archbeat Podcast about governance, right? Right? Implications of Java 6 End of Public Updates for Oracle E-Business Suite Users | Steven Chan The short version is: "Nothing will change for EBS users after February 2013." According to Steven Chan, "EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6." You'll find additional information on Steven's blog. ADF Mobile Custom Javascript – iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. How Data and BPM are married to get the right information to the right people at the right time | Leon Smiers "Business Process Management…supports a large group of stakeholders within an organization, all with different needs," says Oracle ACE Leon Smiers. "End-to-end processes typically run across departments, stakeholders and applications, and can often have a long life-span. So how do organizations provide all stakeholders with the information they need?" Leon provides answers in this post. Thought for the Day "(When) asking skilled architects…what they do when confronted with highly complex problems…(they) would most likely answer, 'Just use Common Sense.' (A) better expression than 'common sense' is 'contextual sense' — a knowledge of what is reasonable within a given content. Practicing architects through eduction, experience and examples accumulate a considerable body of contextual sense by the time they're entrusted with solving a system-level problem…" — Eberhardt Rechtin (January 16, 1926 – April 14, 2006) Source: SoftwareQuotes.com

  Read the article

• Oracle at ASMC PDI 2012

  - by jeffrey.waterman

  Recently, I had the pleasure of representing Oracle at the American Society of Military Comptrollers National Professional Development Institute (PDI).  The PDI is the premier training event for resource managers in the Department of Defense and US Coast Guard.  Each year they assemble top presenters and key note speakers to convey their experiences and share the upcoming goals and vision for the Defense Department's financial and resource management community.  This year, the common themes were centered around 'auditability' and 'efficiency'.   What is auditability?  There were many definitions/themes tossed around, but to summarize my notes, it boiled down to:- the proper tracking of funds- audit readiness- proper controls- proper documentation There were sessions regarding entire programs focused on the need for auditability.  For example, FIAR: Financial Improvement and Audit Readiness (http://comptroller.defense.gov/fiar/index.html)   The FIAR stresses the "...improve(ment of) the Department's financial processes, controls and information." The entire conference, one set of solutions kept popping into my head around, "how can Oracle's solutions assist the Department of Defense", or any other Federal Agency, improve their financial processes and controls?   One answer came to mind:  Oracle Governance, Risk, and Compliance Management. Commonly referred to as "GRC". Let me summarize the main components around Oracle's GRC solution: GRC Manager: This solution is the central repository for documenting business processes, policies, and established controls.  All identified risks and issues are documented within the repository as well as action plans necessary for mitigation. GRC Controls:  This solution consists of a set of tools which are embedded with your ERP (financial, human resource, supply chain, etc.) applications to detect, prevent, and/or enforce the policies and procedures established by your Agency.  Components of the solution include:- Application Access Control Governor: a robust tool for managing application roles and responsibilities; simplify segregation of duty maintenance- Configuration Controls Governor: complete audit trail for changes made to configurations- Transactions Control Governor: track violations of internal controls; alert management to suspicious activities; be warned when high dollar transactions are occurring on an irregular basis; - Preventative Controls Governor: prevent sensitive information from being viewed by unauthorized parties; enforce field, block, and form change control If you are in the financial or resource management community and are concerned about auditability within your organization I suggest you follow up this post by reading about Oracle's GRC solutions.  www.oracle.com/grc Please feel free to follow up with thought and questions in the comments section below.  Also, if you have a topic you would like addressed in this blog, just drop me a note at [email protected]  or leave the suggestion in the comment section as well. Thank you for reading.

  Read the article

• Building an Infrastructure Cloud with Oracle VM for x86 + Enterprise Manager 12c

  - by Richard Rotter

  Cloud Computing? Everyone is talking about Cloud these days. Everyone is explaining how the cloud will help you to bring your service up and running very fast, secure and with little effort. You can find these kinds of presentations at almost every event around the globe. But what is really behind all this stuff? Is it really so simple? And the answer is: Yes it is! With the Oracle SW Stack it is! In this post, I will try to bring this down to earth, demonstrating how easy it could be to build a cloud infrastructure with Oracle's solution for cloud computing.But let me cover some basics first: How fast can you build a cloud?How elastic is your cloud so you can provide new services on demand? How much effort does it take to monitor and operate your Cloud Infrastructure in order to meet your SLAs?How easy is it to chargeback for your services provided? These are the critical success factors of Cloud Computing. And Oracle has an answer to all those questions. By using Oracle VM for X86 in combination with Enterprise Manager 12c you can build and control your cloud environment very fast and easy. What are the fundamental building blocks for your cloud? Oracle Cloud Building Blocks #1 Hardware Surprise, surprise. Even the cloud needs to run somewhere, hence you will need hardware. This HW normally consists of servers, storage and networking. But Oracles goes beyond that. There are Optimized Solutions available for your cloud infrastructure. This is a cookbook to build your HW cloud platform. For example, building your cloud infrastructure with blades and our network infrastructure will reduce complexity in your datacenter (Blades with switch network modules, splitter cables to reduce the amount of cables, TOR (Top Of the Rack) switches which are building the interface to your infrastructure environment. Reducing complexity even in the cabling will help you to manage your environment more efficient and with less risk. Of course, our engineered systems fit into the cloud perfectly too. Although they are considered as a PaaS themselves, having the database SW (for Exadata) and the application development environment (for Exalogic) already deployed on them, in general they are ideal systems to enable you building your own cloud and PaaS infrastructure. #2 Virtualization The next missing link in the cloud setup is virtualization. For me personally, it's one of the most hidden "secret", that oracle can provide you with a complete virtualization stack in terms of a hypervisor on both architectures: X86 and Sparc CPUs. There is Oracle VM for X86 and Oracle VM for Sparc available at no additional  license costs if your are running this virtualization stack on top of Oracle HW (and with Oracle Premier Support for HW). This completes the virtualization portfolio together with Solaris Zones introduced already with Solaris 10 a few years ago. Let me explain how Oracle VM for X86 works: Oracle VM for x86 consists of two main parts: - The Oracle VM Server: Oracle VM Server is installed on bare metal and it is the hypervisor which is able to run virtual machines. It has a very small footprint. The ISO-Image of Oracle VM Server is only 200MB large. It is very small but efficient. You can install a OVM-Server in less than 5 mins by booting the Server with the ISO-Image assigned and providing the necessary configuration parameters (like installing an Linux distribution). After the installation, the OVM-Server is ready to use. That's all. - The Oracle VM-Manager: OVM-Manager is the central management tool where you can control your OVM-Servers. OVM-Manager provides the graphical user interface, which is an Application Development Framework (ADF) application, with a familiar web-browser based interface, to manage Oracle VM Servers, virtual machines, and resources. The Oracle VM Manager has the following capabilities: Create virtual machines Create server pools Power on and off virtual machines Manage networks and storage Import virtual machines, ISO files, and templates Manage high availability of Oracle VM Servers, server pools, and virtual machines Perform live migration of virtual machines I want to highlight one of the goodies which you can use if you are running Oracle VM for X86: Preconfigured, downloadable Virtual Machine Templates form edelivery With these templates, you can download completely preconfigured Virtual Machines in your environment, boot them up, configure them at first time boot and use it. There are templates for almost all Oracle SW and Applications (like Fusion Middleware, Database, Siebel, etc.) available. #3) Cloud Management The management of your cloud infrastructure is key. This is a day-to-day job. Acquiring HW, installing a virtualization layer on top of it is done just at the beginning and if you want to expand your infrastructure. But managing your cloud, keeping it up and running, deploying new services, changing your chargeback model, etc, these are the daily jobs. These jobs must be simple, secure and easy to manage. The Enterprise Manager 12c Cloud provides this functionality from one management cockpit. Enterprise Manager 12c uses Oracle VM Manager to control OVM Serverpools. Once you registered your OVM-Managers in Enterprise Manager, then you are able to setup your cloud infrastructure and manage everything from Enterprise Manager. What you need to do in EM12c is: ">Register your OVM Manager in Enterprise ManagerAfter Registering your OVM Manager, all the functionality of Oracle VM for X86 is also available in Enterprise Manager. Enterprise Manager works as a "Manger" of the Manager. You can register as many OVM-Managers you want and control your complete virtualization environment Create Roles and Users for your Self Service Portal in Enterprise ManagerWith this step you allow users to logon on the Enterprise Manager Self Service Portal. Users can request Virtual Machines in this portal. Setup the Cloud InfrastructureSetup the Quotas for your self service users. How many VMs can they request? How much of your resources ( cpu, memory, storage, network, etc. etc.)? Which SW components (templates, assemblys) can your self service users request? In this step, you basically set up the complete cloud infrastructure. Setup ChargebackOnce your cloud is set up, you need to configure your chargeback mechanism. The Enterprise Manager collects the resources metrics, which are used in a very deep level. Almost all collected Metrics could be used in the chargeback module. You can define chargeback plans based on configurations (charge for the amount of cpu, memory, storage is assigned to a machine, or for a specific OS which is installed) or chargeback on resource consumption (% of cpu used, storage used, etc). Or you can also define a combination of configuration and consumption chargeback plans. The chargeback module is very flexible. Here is a overview of the workflow how to handle infrastructure cloud in EM: Summary As you can see, setting up an Infrastructure Cloud Service with Oracle VM for X86 and Enterprise Manager 12c is really simple. I personally configured a complete cloud environment with three X86 servers and a small JBOD san box in less than 3 hours. There is no magic in it, it is all straightforward. Of course, you have to have some experience with Oracle VM and Enterprise Manager. Experience in setting up Linux environments helps as well. I plan to publish a technical cookbook in the next few weeks. I hope you found this post useful and will see you again here on our blog. Any hints, comments are welcome!

  Read the article

• asus n550jv audio problem: no sound from notebook' speakers

  - by skywalker

  Ubuntu 13.10. The problem is: the internal speakers don't work. I have no problem when I'm using the headphones. There is no hardware issue since in windows 8 everything works perfectly(external subwoofer included). I'm trying to modify /etc/modprobe.d/alsa-base.conf but I can't find the correct model to put into: options snd-hda-intel model= The file HD-Audio-Models.txt doesn't contain the model for ALC668. Some info: :~sudo aplay -l **** List of PLAYBACK Hardware Devices **** card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 :~$ sudo lspci -v | grep -A7 -i "audio" 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f7a14000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel -- 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc. Device 11cd Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel PS info :~$ amixer -c 0 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] :~$ pacmd dump-volumes Welcome to PulseAudio! Use "help" for usage information. Sink 0: reference = 0: 76% 1: 76%, real = 0: 76% 1: 76%, soft = 0: 100% 1: 100%, current_hw = 0: 76% 1: 76%, save = yes Input 8: volume = 0: 100% 1: 100%, reference_ratio = 0: 100% 1: 100%, real_ratio = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, volume_factor = 0: 100% 1: 100%, volume_factor_sink = 0: 100% 1: 100%, save = no Source 0: reference = 0: 100% 1: 100%, real = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, current_hw = 0: 100% 1: 100%, save = no Source 1: reference = 0: 16% 1: 16%, real = 0: 16% 1: 16%, soft = 0: 100% 1: 100%, current_hw = 0: 16% 1: 16%, save = yes

  Read the article

• Time passage arithmetic explanation

  - by Cyber Axe

  I ported this from http://www.effectgames.com/effect/article.psp.html/joe/Old_School_Color_Cycling_with_HTML5 some time ago. However i'm now wanting to modify it for the purpose of changing it from floating point to fixed point maths for enhanced efficiency (for those who are going to talk about premature optimization and what not, i want to have my entire engine in fixed point both as a learning process for me and so i can port code more easily to systems in the future that dont have native floating points such as arm cpus) My initial conversion to fixed points just resulted in the cycling stuck on either the first or last frame of cycling. Plus it would be nice to understand better how it works so i can add more options and so forth in the future, my maths however sucks and the comments are limited so i don't really know how the maths work for determining the frame it shoud use (cycleAmount) I was also a beginner when i ported it as i had no idea between floating points and integers and what not. So in summary my question is, can anyone give an explination of the arithmatic used for determining the cycleAmount (which determings the "frame" of the cycle) This is the working floating point maths version of the code: public final void cycle(Colour[] sourceColours, double timeNow, double speedAdjust) { // Cycle all animated colour ranges in palette based on timestamp. sourceColours = sourceColours.clone(); int cycleSize; double cycleRate; double cycleAmount; Cycle cycle; for (int i = 0, len = cycles.length; i < len; ++i) { cycle = cycles[i]; cycleSize = (cycle.HIGH - cycle.LOW) + 1; cycleRate = cycle.RATE / (int) (CYCLE_SPEED / speedAdjust); cycleAmount = 0; if (cycle.REVERSE < 3) { // Standard Cycle cycleAmount = DFLOAT_MOD((timeNow / (1000 / cycleRate)), cycleSize); if (cycle.REVERSE < 1) { cycleAmount = cycleSize - cycleAmount; // If below 1 make sure its not reversed. } } else if (cycle.REVERSE == 3) { // Ping-Pong cycleAmount = DFLOAT_MOD((timeNow / (1000 / cycleRate)), cycleSize << 1); if (cycleAmount >= cycleSize) { cycleAmount = (cycleSize * 2) - cycleAmount; } } else if (cycle.REVERSE < 6) { // Sine Wave cycleAmount = DFLOAT_MOD((timeNow / (1000 / cycleRate)), cycleSize); cycleAmount = Math.sin((cycleAmount * 3.1415926 * 2) / cycleSize) + 1; if (cycle.REVERSE == 4) { cycleAmount *= (cycleSize / 4); } else if (cycle.REVERSE == 5) { cycleAmount *= (cycleSize >> 1); } } if (cycle.REVERSE == 2) { reverseColours(sourceColours, cycle); } if (USE_BLEND_SHIFT) { blendShiftColours(sourceColours, cycle, cycleAmount); } else { shiftColours(sourceColours, cycle, cycleAmount); } if (cycle.REVERSE == 2) { reverseColours(sourceColours, cycle); } } colours = sourceColours; } // This utility function allows for variable precision floating point modulus. private double DFLOAT_MOD(final double d, final double b) { return (Math.floor(d * PRECISION) % Math.floor(b * PRECISION)) / PRECISION; }

  Read the article

• Ideas for attack damage algorithm (language irrelevant)

  - by Dillon

  I am working on a game and I need ideas for the damage that will be done to the enemy when your player attacks. The total amount of health that the enemy has is called enemyHealth, and has a value of 1000. You start off with a weapon that does 40 points of damage (may be changed.) The player has an attack stat that you can increase, called playerAttack. This value starts off at 1, and has a possible max value of 100 after you level it up many times and make it farther into the game. The amount of damage that the weapon does is cut and dry, and subtracts 40 points from the total 1000 points of health every time the enemy is hit. But what the playerAttack does is add to that value with a percentage. Here is the algorithm I have now. (I've taken out all of the gui, classes, etc. and given the variables very forward names) double totalDamage = weaponDamage + (weaponDamage*(playerAttack*.05)) enemyHealth -= (int)totalDamage; This seemed to work great for the most part. So I statrted testing some values... //enemyHealth ALWAYS starts at 1000 weaponDamage = 50; playerAttack = 30; If I set these values, the amount of damage done on the enemy is 125. Seemed like a good number, so I wanted to see what would happen if the players attack was maxed out, but with the weakest starting weapon. weaponDamage = 50; playerAttack = 100; the totalDamage ends up being 300, which would kill an enemy in just a few hits. Even with your attack that high, I wouldn't want the weakest weapon to be able to kill the enemy that fast. I thought about adding defense, but I feel the game will lose consistency and become unbalanced in the long run. Possibly a well designed algorithm for a weapon decrease modifier would work for lower level weapons or something like that. Just need a break from trying to figure out the best way to go about this, and maybe someone that has experience with games and keeping the leveling consistent could give me some ideas/pointers.

  Read the article

• WPF Control Toolkits Comparison for LOB Apps

  In preparation for a new WPF project Ive been researching options for WPF Control toolkits.  While we want a lot of the benefits of WPF, the application is a fairly typical line of business application (LOB).  So were not focused on things like media and animations, but instead a simple, solid, intuitive, and modern user interface that allows for well architected separation of business logic and presentation layers. While WPF is mature, it hasnt lived the long life that Winforms has yet, so there is still a lot of room for third party and community control toolkits to fill the gaps between the controls that ship with the Framework.  There are two such gaps I was concerned about.  As this is an LOB app, we have needs for presenting lots of data and not surprisingly much of it is in grid format with the need for high performance, grouping, inline editing, aggregation, printing and exporting and things that weve been doing with LOB apps for a long time.  In addition we want a dashboard style for the UI in which the user can rearrange and shrink and grow tiles that house the content and functionality.  From a cost perspective, building these types of well performing controls from scratch doesnt make sense.  So I evaluated what you get from the .NET Framework along with a few different options for control toolkits.  I tried to be fairly thorough, but know that this isnt a detailed benchmarking comparison or intense evaluation.  Its just meant to be a feature set comparison to be used when thinking about building an LOB app in WPF.  I tried to list important feature differences and notes based on my experience with the trial versions and what I found in documentation and reference materials and samples.  Ive also listed the importance of the controls based on how I think they are needed in LOB apps.  There are several toolkits available, but given I dont have unlimited time, I picked just a few.  Maybe Ill add on more later.  The toolkits I compared are: Teleriks RadControls for WPF since I had heard some good things about Telerik Infragistics NetAdvantage WPF since both I and the customer have some experience with the vendors tools WPF Toolkit on codeplex since many of my colleagues have used it Blacklight codeplex project which had WPF support for the Tile View control  (with Release 4.3 WPF is not going to be supported in favor of focusing only on SilverLight controls, so I dropped that from the comparison) Click Here to Download the WPF Control Toolkits Comparison Hopefully this helps someone out there.  Feel free to post a comment on your experiences or if you think something I listed is incorrect or missing.  Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• links for 2011-03-17

  - by Bob Rhubart

  Siba Prasad: Oracle Database on Amazon RDSg Siba Prasad share an analysis of the pros and cons. (tags: oracle database cloud amazon) LIVE WEBCAST March 24 2pm PT- Why Switch from Red Hat and SUSE Linux to Oracle Linux? (Oracle's Linux Blog) Featuring Oracle's Monica Kumar, Sr.Director of Linux, Oracle VM and MySQL and Avi Miller, Principal Sales Consultant, Linux and Virtualization. (tags: oracle linux) Webcast: IBM SOA vs. Oracle SOA, March 24, 1pm ET / 10am PT Maneesh Joshi and Bruce Tierney guide you to a solid understanding of the differences between the Oracle and IBM approach to comprehensive SOA. (tags: oracle soa bpm) Finding the Right Solution to Source and Manage Your Contractors (PeopleSoft Apps Strategy) "Talent has become a primary competitive advantage for most organizations. Contingent labor offers talent on flexible terms; it offers the ability to scale up operations, close skill gaps, and manage risk in the process of delivering services." - Mark Rosenberg (tags: oracle peoplesoft enterprisearchitecture) Oracle Business Intelligence Customers: Have Your Voice Heard in the "2011Wisdom of the Crowds Business Intelligence Market Survey" (BI & Analytics Pulse) "The Wisdom of the Crowds survey combines social media, crowd sourcing, and good old fashioned market research to provide vendors and customers alike an unvarnished and insightful snap shot of what's top of mind with business intelligence professionals." (tags: oracle businessintelligence) Martin Bach: Troubleshooting Grid Infrastructure startup Martin Bach hunts down the problem that caused one of his blades to reboot after an EXT3 journal error. (tags: oracle grid rac) Oracle WebCenter: Social Networking & Collaboration (Oracle Enterprise 2.0 Blog) Kelley Ruppel with information on "how the new release of Oracle WebCenter provides unprecedented Social Networking and Collaboration." (tags: oracle webcenter enterprise2.0 collaboration) VirtaThon: 100% Virtual Java/Oracle/MySQL Conference! | Bex Huff "The goal is simple," says Oracle ACE Director Bex Huff. "Because it's all online, the conference is very cheap. Pricing is not yet announced... but it should be around $300. Also, unlike other conferences, every speaker gets paid a small fee depending on the popularity of his or her session." (tags: oracle oracleace java mysqql) Griffiths Waite Blog: BPM 11g PS3 GW's Ian Heathcock shares a link to "a most interesting article on Oracle's recent release discussing the new features and how PS3 adds value  to the whole SOA message." (tags: oracle soa) The Buttso Blathers: Tutorial: JSF 2.0 and JPA 2.0 with WebLogic Server using NetBeans Should you take application architecture advice from a man named Buttso? In this case, yes. (tags: oracle jsf jpa weblogic) Setting-up a High Available Tuned SOA Environment Middleware Magic (tags: ping.fm) How to Configure Weblogic Messaging Bridge with JBoss Middleware Magic (tags: ping.fm Weblogic JBoss) Richard Veryard on Architecture: Emergent Architecture (tags: ping.fm entarch emergence)

  Read the article

• New channels for Exadata 11.2.3.1.1

  - by Rene Kundersma

  With the release of Exadata 11.2.3.1.0 back in April 2012 Oracle has deprecated the minimal pack for the Exadata Database Servers (compute nodes). From that release the Linux Database Server updates will be done using ULN and YUM. For the 11.2.3.1.0 release the ULN exadata_dbserver_11.2.3.1.0_x86_64_base channel was made available and Exadata operators could subscribe their system to it via linux.oracle.com. With the new 11.2.3.1.1 release two additional channels are added: a 'latest' channel (exadata_dbserver_11.2_x86_64_latest) a 'patch' channel (exadata_dbserver_11.2_x86_64_patch) The patch channel has the new or updated packages updated in 11.2.3.1.1 from the base channel. The latest channel has all the packages from 11.2.3.1.0 base and patch channels combined.  From here there are three possible situations a Database Server can be in before it can be updated to 11.2.3.1.1: Database Server is on Exadata release < 11.2.3.1.0 Database Server is patched to 11.2.3.1.0 Database Server is freshly imaged to 11.2.3.1.0 In order to bring a Database Server to 11.2.3.1.1 for all three cases the same approach for updating can be used (using YUM), but there are some minor differences: For Database Servers on a release < 11.2.3.1.0 the following high-level steps need to be performed: Subscribe to el5_x86_64_addons, ol5_x86_64_latest and  exadata_dbserver_11.2_x86_64_latest Create local repository Point Database Server to the local repository* install the update * during this process a one-time action needs to be done (details in the README) For Database Servers patched to 11.2.3.1.0: Subscribe to patch channel  exadata_dbserver_11.2_x86_64_patch Create local repository Point Database Server to the local repository Update the system For Database Servers freshly imaged to 11.2.3.1.0: Subscribe to patch channel  exadata_dbserver_11.2_x86_64_patch Create local  repository Point Database Server to the local repository Update the system The difference between 'situation 2' (Database Server is patched to 11.2.3.1.0) and 'situation 3' (Database Server is freshly imaged to 11.2.3.1.0) is that in situation 2 the existing Exadata-computenode.repo file needs to be edited while in situation 3 this file is not existing  and needs to be created or copied. Another difference is that you will end up with more OFA packages installed in situation 2. This is because none are removed during the updating process.  The YUM update functionality with the new channels is a great enhancements to the Database Server update procedure. As usual, the updates can be done in a rolling fashion so no database service downtime is required.  For detailed and up-to-date instructions always see the patch README's 1466459.1 patch 13998727 888828.1 Rene Kundersma

  Read the article

• Ubuntu 10.10 forgets desktop theme.

  - by Marcelo Cantos

  (I posed this question on superuser.com and haven't received any answers or comments, then I came across this site, so my apologies to anyone who has seen this already.) I am running Ubuntu in VirtualBox (on a Windows 7 host). Several times now, the top-level menu bar, the task bar — and seemingly every system dialog — have forgotten the out-of-the-box "Ambiance" theme they conform to when I first installed the system. Window captions still preserve the theme, but pretty much nothing else does. I have searched high and low on Google for assistance with this problem. Everything I've found suggests either running some gconf reset or deleting .gconf* .gnome* and other similar directories. I have followed all this advice and nothing works. I still get a boring Windows-95-style gray 3D look and feel. On previous occasions, after much messing around I've given up and rebooted the VM instance, and been pleasantly suprised to see the original "Ambience" theme restored throughout the UI, but invariably it disappears again some time later, usually after a reboot, so I can never figure out what I did that broke it. Here's a sample from Ubuntu's site of what I want it to look like. And here's a screenshot of my system as it currently looks. Also note that my GNOME Terminals normally have a nice purple semi-translucent look, and as can be seen from the screenshot, they are now just a solid matt white. This last time (just yesterday), trying numerous combinations all the usual tricks and rebooting several times hasn't fixed it, so here I am on SU wondering: How do I recover the out-of-the-box theme for my Gnome/Ubuntu desktop, noting that blowing away all config files — as suggested in many places online — fails to achieve this? It might help to know that it seems to fail either after I resize the VM instance, forcing the Ubuntu desktop to resize itself, or after I play around with Compiz settings. I haven't been able to figure out which of these it is, and it could be neither. Given the amount of pain I have had to go through to get things back to normal (and given that I am at a loss as to how to do so), it has proven difficult to definitively isolate the cause.

  Read the article

• ArchBeat Link-o-Rama for 2012-09-19

  - by Bob Rhubart

  BPM Process Accelerator Packs – Update | Pat Shepherd Architect Pat Shepherd shares several resources relevant to the new Oracle Process Accelerators for Oracle Business Process Management. Oracle BI EE Management Pack Now Available for Oracle Enterprise Manager 12cR2 | Mark Rittman A handy and informative overview from Oracle ACE Director Mark Rittman. WebSockets on WebLogic Server | Steve Button "As there's no standard WebSocket Java API at this point, we've chosen to model the API on the Grizzly WebSocket API with some minor changes where necessary," says James "Buttso" Buttons. "Once the results of JSR-356 (Java API for WebSocket) becomes public, we'll look to implement and support that." Oracle Reference Architecture: Software Engineering This document from the IT Strategies from Oracle library focuses on integrated asset management and the need for efffective asset metadata management to insure that assets are properly tracked and reused in a manner that provides a holistic functional view of the enterprise. The tipping point for cloud management is nigh | Cloud Computing - InfoWorld "Businesses typically don't think too much about managing IT resources until they become too numerous and cumbersome to deal with on an ad hoc basis—a point many companies will soon hit in their adoption of cloud computing." — David Linthicum DevOps Basics: Track Down High CPU Thread with ps, top and the new JDK7 jcmd Tool | Frank Munz "The approach is very generic and works for WebLogic, Glassfish or any other Java application," say Frank Munz. "UNIX commands in the example are run on CentOS, so they will work without changes for Oracle Enterprise Linux or RedHat. Creating the thread dump at the end of the video is done with the jcmd tool from JDK7." Frank has captured the process in the posted video. OIM 11g R2 UI customization | Daniel Gralewski "OIM user interface customizations are easier now, and they survive patch applications--there is no need to reapply them after patching," says Fusion Middleware A-Team member Daniel Gralewski. "Adding new artifacts, new skins, and plugging code directly into the user interface components became an easier task." Daniel shows just how easy in this post. Thought for the Day "I have yet to see any problem, however complicated, which, when looked at in the right way, did not become still more complicated." — Poul Anderson (November 25, 1926 – July 31, 2001) Source: SoftwareQuotes.com

  Read the article

• Getting WLAN on my Laptop to work (Medion MD98300)

  - by Anand Böhmer

  Dear Ubuntu Community, I am having difficulties to get the WLAN Adapter on my Medion 98300 Laptop to work. The WLAN Card seems to be connected through an internal USB Interface and the Card itself had shown up as a wirelles Network while installing Ubuntu. I have tried a few things earlier, but none of my google reasearches have brought me to a working solution... I am quite new to the Linux System and only knoew a couple of terminal commands so far, so I probably have missed out on a few possible solutions. Maybe you can help me? Thank you very much in advance! A fre minimal technical Details: AMD Turion 64 X2 Dual-Core Mobile Technolgie TL-50 NVIDIA GeForce Go 6150 SanDisk 64GB SSD 2GB RAM DDR2 667 nForce Chipset (I forgt the Version, but deductable from the GPU I guess) WiFi: ZyDAS ZD1211B 802.11g Thank's a lot again! :) UPDATE: I tried around myself a little and found a guide on the Linux Mint forums that helped! I already had tried to install the linux backport modules etc. What I finally did was update the linux firmware and run the following command: echo "options acer_wmi wirelles=1" sudo tee /etc/modprobe.d/acer_wmi.conf and rebooted now I found and could connect to networks, but unfortunately I found, that the link quality was very bad, around 40 to 50. Eventhough my Router is running at high power and is only 6 Meters away! I then switched a few channels, but that did not improve much. Before, under Windows, I had a very good link quality and had the entire 16mbit/s internet connection at disposal, now I can only get about 3-5Mbit/s. better then nothing, but still pretty bad! The "TX power" is fixed on 20dBm and iwconfig says, that the "Power Management" is off... Maybe the power of the module is set too low?... UPDATE2: I figured that 20dBm is a normal power output. I even tried to change the power using iwconfig wlan0 txpower INTEGERHERE but, obviously my "Card" does not support more then 20. More would probably be illegal as well, so I won't even use more then 20. I guess that I will have to figure out a way, or maybe just switch cards. Are the Mailboard-USB-Connectors on a laptop of the same property as the standard external ones? If so, I could simply solder a micro Wirelless N Adapter onto the board :)

  Read the article

• How to install Network Adapter Drivers for Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) Ubuntu 12.04

  - by Jessica Burnett

  How can I install drivers for 64-bit Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) for Ubuntu 12.04. I dual boot Windows7/Ubuntu 12.04 drivers work for 64-bit Windows 7. lspic -nn: 00:00.0 Host bridge [0600]: Intel Corporation Ivy Bridge DRAM Controller [8086:0154] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Ivy Bridge PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.3 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 4 [8086:1e16] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0de9] (rev a1) 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 08) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2200 [8086:0891] (rev c4) 04:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30) 04:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30) 04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30) 04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30) sudo lshw -c network *-network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 version: 08 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list configuration: latency=0 resources: memory:d3a00000-d3a3ffff ioport:2000(size=128) *-network description: Wireless interface product: Centrino Wireless-N 2200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: c4 serial: 9c:4e:36:14:d4:7c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:45 memory:d3900000-d3901fff I also tried Manually configuring wired connection. Nether wired or wireless connects

  Read the article

• WebCenter Customer Spotlight: Fundação Petrobras de Seguridade Social

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter Solution Summary Fundação Petrobras de Seguridade Social (PetroS) is a Brazilian nonprofit organization pension fund serving 152 private companies with more then 145,000 plan participants and  managing a portfolio of  US$35.9 billion in equity. PetroS business objective was to implement a robust and flexible online solution to enable the foundation to successfully compete in the pension marketplace. PetroS implemented a robust, flexible and highly available database solution based on Oracle Database 11g, Enterprise Edition and modernized the company’s Web portal using Oracle WebCenter Suite.  The solution enables PetroS to make an average of 5,000 online loans per month to its 110,000 qualifying participants and supports 2,000 online consultations daily. Company ProfileFundação Petrobras de Seguridade Social (Petrobras Social Security Foundation)—better known as PetroS—is a pension fund founded in the 1970s to pay supplementary retirement benefits to Petrobras employees. Later, the foundation expanded its market to include 152 private companies, including Sanasa, Repsol YPF and Alesat. The Foundation, a nonprofit organization, has more than 145,000 plan participants, US$35.9 billion in equity, and a loan portfolio of US$730 million. Business ChallengesPetroS business objectives were to implement a robust and flexible solution to enable the foundation to successfully compete in the pension marketplace without affecting its monthly payments to 60,000 beneficiaries and to extend service delivery through the Web to better serve the fund’s more than 145,000 participants. Solution DeployedPetroS worked with Oracle Consulting to implement a robust, flexible and high available database solution based on Oracle Database 11g, Enterprise Edition and modernized the company’s Web portal using Oracle WebCenter Suite, enabling PetroS to deliver more flexible services to pension plan participants. Business ResultsThe solution enables PetroS to make an average of 5,000 online loans per month to its 110,000 qualifying participants and supports 2,000 online consultations daily. “The combination of Oracle Database 11g and Oracle WebCenter Suite has helped us deliver faster and better service for over 130,000 clients who participate in the 96 supplementary pension plans we currently offer. It has certainly helped to fuel our growth.” Newton Carneiro da Cunha, Diretor Administrativo, Fundação Petrobrás de Seguridade Social           Additional Information PetroS Customer Snapshot Oracle WebCenter Suite Oracle Database 11g, Enterprise Edition Oracle Real Application Clusters Oracle Diagnostics Pack Oracle Tuning Pack Oracle Consulting

  Read the article

• Tackling Big Data Analytics with Oracle Data Integrator

  - by Irem Radzik

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";}  By Mike Eisterer  The term big data draws a lot of attention, but behind the hype there's a simple story. For decades, companies have been making business decisions based on transactional data stored in relational databases. Beyond that critical data, however, is a potential treasure trove of less structured data: weblogs, social media, email, sensors, and documents that can be mined for useful information.  Companies are facing emerging technologies, increasing data volumes, numerous data varieties and the processing power needed to efficiently analyze data which changes with high velocity. Oracle offers the broadest and most integrated portfolio of products to help you acquire and organize these diverse data sources and analyze them alongside your existing data to find new insights and capitalize on hidden relationships Oracle Data Integrator Enterprise Edition(ODI) is critical to any enterprise big data strategy. ODI and the Oracle Data Connectors provide native access to Hadoop, leveraging such technologies as MapReduce, HDFS and Hive. Alongside with ODI’s metadata driven approach for extracting, loading and transforming data; companies may now integrate their existing data with big data technologies and deliver timely and trusted data to their analytic and decision support platforms. In this session, you’ll learn about ODI and Oracle Big Data Connectors and how, coupled together, they provide the critical integration with multiple big data platforms. Tackling Big Data Analytics with Oracle Data Integrator October 1, 2012 12:15 PM at MOSCONE WEST – 3005 For other data integration sessions at OpenWorld, please check our Focus-On document.  If you are not able to attend OpenWorld, please check out our latest resources for Data Integration.

  Read the article

• Adding Column to a SQL Server Table

  - by Dinesh Asanka

  Adding a column to a table is  common task for  DBAs. You can add a column to a table which is a nullable column or which has default values. But are these two operations are similar internally and which method is optimal? Let us start this with an example. I created a database and a table using following script: USE master Go --Drop Database if exists IF EXISTS (SELECT 1 FROM SYS.databases WHERE name = 'AddColumn') DROP DATABASE AddColumn --Create the database CREATE DATABASE AddColumn GO USE AddColumn GO --Drop the table if exists IF EXISTS ( SELECT 1 FROM sys.tables WHERE Name = 'ExistingTable') DROP TABLE ExistingTable GO --Create the table CREATE TABLE ExistingTable (ID BIGINT IDENTITY(1,1) PRIMARY KEY CLUSTERED, DateTime1 DATETIME DEFAULT GETDATE(), DateTime2 DATETIME DEFAULT GETDATE(), DateTime3 DATETIME DEFAULT GETDATE(), DateTime4 DATETIME DEFAULT GETDATE(), Gendar CHAR(1) DEFAULT 'M', STATUS1 CHAR(1) DEFAULT 'Y' ) GO -- Insert 100,000 records with defaults records INSERT INTO ExistingTable DEFAULT VALUES GO 100000 Before adding a Column Before adding a column let us look at some of the details of the database. DBCC IND (AddColumn,ExistingTable,1) By running the above query, you will see 637 pages for the created table. Adding a Column You can add a column to the table with following statement. ALTER TABLE ExistingTable Add NewColumn INT NULL Above will add a column with a null value for the existing records. Alternatively you could add a column with default values. ALTER TABLE ExistingTable Add NewColumn INT NOT NULL DEFAULT 1 The above statement will add a column with a 1 value to the existing records. In the below table I measured the performance difference between above two statements. Parameter Nullable Column Default Value CPU 31 702 Duration 129 ms 6653 ms Reads 38 116,397 Writes 6 1329 Row Count 0 100000 If you look at the RowCount parameter, you can clearly see the difference. Though column is added in the first case, none of the rows are affected while in the second case all the rows are updated. That is the reason, why it has taken more duration and CPU to add column with Default value. We can verify this by several methods. Number of Pages The number of data pages can be obtained by using DBCC IND command. Though, this an undocumented dbcc command, many experts are ok to use this command in production. However, since there is no official word from Microsoft, use this “at your own risk”. DBCC IND (AddColumn,ExistingTable,1) Before Adding the Columns 637 Adding a Column with NULL 637 Adding a column with DEFAULT value 1270 This clearly shows that pages are physically modified. Please note, a high value indicated in the Adding a column with DEFAULT value  column is also a result of page splits. Continues…

  Read the article

• Telesharp – An Application Repository for .NET applications

  - by cibrax

  A year ago, we released SO-Aware as our first product in Tellago Studios. SO-Aware represented a new way to manage web services and all the related artifacts like configuration, tests or monitoring data in the Microsoft stack. It was based on the idea of using a lightweight SOA governance approach with a central repository exposed through RESTful services. At that point, we thought the same idea could be extended to enterprise applications in general by providing a generic repository for many of the runtime or design time artifacts generated during the development like configuration, application description or topology (a high level view of the components that made up a system), logging information or binaries. It took us several months to give a form to that idea and implement it as a product, but it is finally here and I am very proud to announce the release today under the name of “TeleSharp”. Telesharp provides in a nutshell the following features, 1. Configure your application topology in a central repository. Application topology in this context means that you can decompose your application and describe it in terms of components and how they interact each other. For example, you can tell that the CRM system is made up of a couple of WCF services and a ASP.NET MVC front end. 2. Centralize configuration for your applications and components.  You can import existing .NET configuration sections into the repository and associate them to the different components. In addition, environment overrides are supported for the configuration sections. We provide tooling and extensions in Visual Studio for managing all the configuration, and a set of powershell commands for automating the configuration deployment. 3. Browse all the assemblies and types remotely in your application servers in a web browser using an interface similar to any of the existing .NET reflection tools. You can easily determine this way whether the server is running the correct version of your applications. 4. Centralize logging and exception management into the repository. You get different reports and a pivot viewer experience for browsing all the different logging information generated by your applications. In addition, TeleSharp provides different providers for pushing the logging information to the central repository using well-known frameworks like ELMAH, Log4Net, EntLib or even Windows ETW.  The central repository itself is implemented as a set of OData services that any application can easily consume using regular Http. You can read more details in this introductory post If you think this product can be a good fit in your organization, you can request a trial version in our Tellago Studios website.

  Read the article

• Suggestions for getting an open source electron beam tracking code going

  - by Boaz

  I work in the field of accelerator physics and synchrotron radiation. High energy electrons circulating in large rings of magnets produce x-rays that are used for a variety of different kinds of science. Running and improving these facilities requires controlling and modelling the electron beam as it circulates in the ring. A code to model this basically requires trackers to follow the electrons through the elements (something called a symplectic integrator), and then the computation of different parameters associated with this motion. The problem with these codes is that every facility has there own. In principle the code is not so complex. And as a modelling project, one might think it has some general interest. Who doesn't want to be able to create a track in space out of magnets and watch the electrons circulate? There is a Matlab based code to do this called Accelerator Toolbox, but the creator of the code is no longer in the field. I put the code in Sourceforge under the name atcollab. The basic resource is in C- it is the set of symplectic integrators. These are available in the atcollab code here. It has been useful to put the code on Sourceforge in order to exchange code, but the community of users is quite small and most are too busy to put that much time into collaboration. So in terms of really improving the code, I don't think it has been so successful. Any piece of this picture could be recreated without that much difficulty, but overall it is a bit complex, and because each lab has their own installation with lots of add-on Matlab code, people find it hard to really work together and share code. Somehow I think we need to involve a wider community in our development, or just use some standard tools. But for that, I suppose it needs to be of some general interest. I think symplectic integrators may have some general interest. And the part about a plug-in architecture to build up the ring ought to fit other patterns. Or the other option is to just accept that this is not a problem of general interest, and work harder within our small community. Suggestions, or anecdotes of analogous experience would be appreciated.

  Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >